You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1837 lines
76 KiB
1837 lines
76 KiB
#ifndef CONDITIONALS_LULZBOT
|
|
#define CONDITIONALS_LULZBOT
|
|
|
|
/* We define LULZBOT_ macros based on which printer or toolhead we are
|
|
* building for, these macros are then placed where appropriate in the
|
|
* Marlin source.
|
|
*
|
|
* Using our own set of macros and limiting changes to Marlin's files
|
|
* to one-liners makes it easier to merge from upstream. All macros are
|
|
* prefixed with LULZBOT_ so that it is easy to see what was changed and
|
|
* where. If a default setting is commented out in Marlin, we define
|
|
* LULZBOT_{SETTING}_DISABLED here, so we have a record of things that
|
|
* got disabled.
|
|
*/
|
|
|
|
#define LULZBOT_FW_VERSION ".11" // Change this with each update
|
|
|
|
#if ( \
|
|
!defined(LULZBOT_Gladiola_Mini) && \
|
|
!defined(LULZBOT_Gladiola_MiniLCD) && \
|
|
!defined(LULZBOT_Juniper_TAZ5) && \
|
|
!defined(LULZBOT_Oliveoil_TAZ6) && \
|
|
!defined(LULZBOT_Hibiscus_Mini2) && \
|
|
!defined(LULZBOT_Hibiscus_Mini2_CLCD) && \
|
|
!defined(LULZBOT_Quiver_TAZ7) && \
|
|
!defined(LULZBOT_Quiver_TAZ7_CLCD) \
|
|
) || ( \
|
|
!defined(TOOLHEAD_Gladiola_SingleExtruder) && \
|
|
!defined(TOOLHEAD_Albatross_Flexystruder) && \
|
|
!defined(TOOLHEAD_Finch_Aerostruder) && \
|
|
!defined(TOOLHEAD_Finch_AerostruderV2) && \
|
|
!defined(TOOLHEAD_Tilapia_SingleExtruder) && \
|
|
!defined(TOOLHEAD_Kanyu_Flexystruder) && \
|
|
!defined(TOOLHEAD_Opah_Moarstruder) && \
|
|
!defined(TOOLHEAD_Javelin_DualExtruderV2) && \
|
|
!defined(TOOLHEAD_Longfin_FlexyDually) && \
|
|
!defined(TOOLHEAD_Yellowfin_DualExtruderV3) && \
|
|
!defined(TOOLHEAD_Angelfish_Aerostruder) && \
|
|
!defined(TOOLHEAD_Devel_ServoDual) \
|
|
)
|
|
#error Must specify model and toolhead. Please see "Configuration_LulzBot.h" for directions.
|
|
#endif
|
|
|
|
/*********************** PRINTER MODEL CHARACTERISTICS **************************/
|
|
|
|
#if defined(LULZBOT_Gladiola_Mini)
|
|
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini"
|
|
#define LULZBOT_LCD_MACHINE_NAME "Mini"
|
|
#define LULZBOT_IS_MINI
|
|
#define LULZBOT_MINI_BED
|
|
#define LULZBOT_USE_AUTOLEVELING
|
|
#define LULZBOT_USE_MIN_ENDSTOPS
|
|
#define LULZBOT_USE_MAX_ENDSTOPS
|
|
#define LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS
|
|
#define LULZBOT_USE_Z_SCREW
|
|
#define LULZBOT_BAUDRATE 250000
|
|
#define LULZBOT_UUID "351487b6-ca9a-4c1a-8765-d668b1da6585"
|
|
#endif
|
|
|
|
#if defined(LULZBOT_Gladiola_MiniLCD)
|
|
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini LCD"
|
|
#define LULZBOT_LCD_MACHINE_NAME "Mini LCD"
|
|
#define LULZBOT_IS_MINI
|
|
#define LULZBOT_MINI_BED
|
|
#define LULZBOT_USE_LCD_DISPLAY
|
|
#define LULZBOT_USE_AUTOLEVELING
|
|
#define LULZBOT_USE_MIN_ENDSTOPS
|
|
#define LULZBOT_USE_MAX_ENDSTOPS
|
|
#define LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS
|
|
#define LULZBOT_USE_Z_SCREW
|
|
#define LULZBOT_BAUDRATE 250000
|
|
#define LULZBOT_UUID "083f68f1-028e-494c-98e1-f2e0dfaee9a5"
|
|
#endif
|
|
|
|
#if defined(LULZBOT_Juniper_TAZ5)
|
|
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 5"
|
|
#define LULZBOT_LCD_MACHINE_NAME "TAZ 5"
|
|
#define LULZBOT_IS_TAZ
|
|
#define LULZBOT_TAZ_BED
|
|
#define LULZBOT_USE_LCD_DISPLAY
|
|
#define LULZBOT_USE_MIN_ENDSTOPS
|
|
#define LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS
|
|
#define LULZBOT_USE_Z_SCREW
|
|
#define LULZBOT_BAUDRATE 250000
|
|
#define LULZBOT_UUID "c3255c96-4097-4884-8ed0-ded2ff9bae61"
|
|
#endif
|
|
|
|
#if defined(LULZBOT_Oliveoil_TAZ6)
|
|
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 6"
|
|
#define LULZBOT_LCD_MACHINE_NAME "TAZ 6"
|
|
#define LULZBOT_IS_TAZ
|
|
#define LULZBOT_TAZ_BED
|
|
#define LULZBOT_USE_LCD_DISPLAY
|
|
#define LULZBOT_USE_AUTOLEVELING
|
|
#define LULZBOT_USE_MIN_ENDSTOPS
|
|
#define LULZBOT_USE_MAX_ENDSTOPS
|
|
#define LULZBOT_USE_HOME_BUTTON
|
|
#define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
|
|
#define LULZBOT_USE_Z_SCREW
|
|
#define LULZBOT_BAUDRATE 250000
|
|
#define LULZBOT_UUID "845f003c-aebd-4e53-a6b9-7d0984fde609"
|
|
#endif
|
|
|
|
#if defined(LULZBOT_Hibiscus_Mini2)
|
|
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini 2"
|
|
#define LULZBOT_LCD_MACHINE_NAME "Mini 2"
|
|
#define LULZBOT_IS_MINI
|
|
#define LULZBOT_MINI_BED
|
|
#define LULZBOT_USE_EINSYRAMBO
|
|
#define LULZBOT_USE_EINSY_RETRO
|
|
#define LULZBOT_USE_LCD_DISPLAY
|
|
#define LULZBOT_TWO_PIECE_BED
|
|
#define LULZBOT_USE_AUTOLEVELING
|
|
#define LULZBOT_SENSORLESS_HOMING
|
|
#define LULZBOT_USE_TMC_STEALTHCHOP_Z
|
|
#define LULZBOT_USE_Z_BELT
|
|
#define LULZBOT_BAUDRATE 250000
|
|
#define LULZBOT_PRINTCOUNTER
|
|
#define LULZBOT_USE_32_MICROSTEPS_ON_Z
|
|
#define LULZBOT_UUID "e5502411-d46d-421d-ba3a-a20126d7930f"
|
|
#define LULZBOT_MODERN_UI
|
|
#define LULZBOT_USE_EXPERIMENTAL_FEATURES
|
|
#endif
|
|
|
|
#if defined(LULZBOT_Hibiscus_Mini2_CLCD)
|
|
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini 2"
|
|
#define LULZBOT_LCD_MACHINE_NAME "Mini 2"
|
|
#define LULZBOT_IS_MINI
|
|
#define LULZBOT_MINI_BED
|
|
#define LULZBOT_USE_EINSYRAMBO
|
|
#define LULZBOT_USE_EINSY_RETRO
|
|
#define LULZBOT_USE_TOUCH_UI
|
|
#define LULZBOT_USE_HIGH_RES
|
|
#define LULZBOT_TWO_PIECE_BED
|
|
#define LULZBOT_USE_AUTOLEVELING
|
|
#define LULZBOT_SENSORLESS_HOMING
|
|
#define LULZBOT_USE_TMC_STEALTHCHOP_Z
|
|
#define LULZBOT_USE_Z_BELT
|
|
#define LULZBOT_BAUDRATE 250000
|
|
#define LULZBOT_PRINTCOUNTER
|
|
#define LULZBOT_USE_32_MICROSTEPS_ON_Z
|
|
#define LULZBOT_UUID "e5502411-d46d-421d-ba3a-a20126d7930f"
|
|
#define LULZBOT_USE_EXPERIMENTAL_FEATURES
|
|
#endif
|
|
|
|
#if defined(LULZBOT_Quiver_TAZ7)
|
|
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 7"
|
|
#define LULZBOT_LCD_MACHINE_NAME "TAZ 7"
|
|
#define LULZBOT_IS_TAZ
|
|
#define LULZBOT_TAZ_BED
|
|
#define LULZBOT_TWO_PIECE_BED
|
|
#define LULZBOT_USE_LCD_DISPLAY
|
|
#define LULZBOT_USE_AUTOLEVELING
|
|
#define LULZBOT_USE_MIN_ENDSTOPS
|
|
#define LULZBOT_USE_MAX_ENDSTOPS
|
|
#define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
|
|
#define LULZBOT_USE_Z_BELT
|
|
#define LULZBOT_BAUDRATE 250000
|
|
#define LULZBOT_PRINTCOUNTER
|
|
#define LULZBOT_UUID "a952577d-8722-483a-999d-acdc9e772b7b"
|
|
#define LULZBOT_MODERN_UI
|
|
#define LULZBOT_USE_EXPERIMENTAL_FEATURES
|
|
#endif
|
|
|
|
#if defined(LULZBOT_Quiver_TAZ7_CLCD)
|
|
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot TAZ 7"
|
|
#define LULZBOT_LCD_MACHINE_NAME "TAZ 7"
|
|
#define LULZBOT_IS_TAZ
|
|
#define LULZBOT_TAZ_BED
|
|
#define LULZBOT_TWO_PIECE_BED
|
|
#define LULZBOT_USE_TOUCH_UI
|
|
#define LULZBOT_USE_HIGH_RES
|
|
#define LULZBOT_USE_AUTOLEVELING
|
|
#define LULZBOT_USE_MIN_ENDSTOPS
|
|
#define LULZBOT_USE_MAX_ENDSTOPS
|
|
#define LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS
|
|
#define LULZBOT_USE_Z_BELT
|
|
#define LULZBOT_BAUDRATE 250000
|
|
#define LULZBOT_PRINTCOUNTER
|
|
#define LULZBOT_UUID "a952577d-8722-483a-999d-acdc9e772b7b"
|
|
#define LULZBOT_USE_EXPERIMENTAL_FEATURES
|
|
#endif
|
|
|
|
/****************************** DEBUGGING OPTIONS *******************************/
|
|
|
|
//#define LULZBOT_TMC_SHOW_CURRENT_ADJUSTMENTS
|
|
//#define LULZBOT_MONITOR_TMC_TEMPERATURE
|
|
|
|
/**************************** GENERAL CONFIGURATION *****************************/
|
|
|
|
#define LULZBOT_STRING_CONFIG_H_AUTHOR "(Aleph Objects Inc., LulzBot Git Repository)"
|
|
#define LULZBOT_EEPROM_SETTINGS
|
|
#define LULZBOT_EMERGENCY_PARSER
|
|
#define LULZBOT_NOZZLE_PARK_FEATURE
|
|
#define LULZBOT_AUTO_REPORT_TEMPERATURES
|
|
#define LULZBOT_ADVANCED_OK
|
|
#define LULZBOT_TX_BUFFER_SIZE 32
|
|
#define LULZBOT_BUFSIZE 10
|
|
#define LULZBOT_HOST_KEEPALIVE_FEATURE_DISABLED
|
|
#define LULZBOT_CLARIFY_ERROR_MESSAGES
|
|
|
|
// Marlin 1.1.4 has changed the behavior of G92 so that
|
|
// it changes software endstops, making it less useful
|
|
// for making position adjustments after hitting an
|
|
// endstop. We need the old behavior of G92 for the
|
|
// Yellowfin start GCODE and it is also a useful
|
|
// feature for custom height adjustments (something
|
|
// requested in the forums). The following restores
|
|
// the old behavior.
|
|
|
|
#define LULZBOT_G92_BACKWARDS_COMPATIBILITY
|
|
|
|
// Prior branches of the LulzBot firmware used G26
|
|
// to reset a probe failed condition. Marlin upstrem
|
|
// now redefines that for unified bed leveling. The
|
|
// following maps G26 to M999 for equivalent behavior,
|
|
// so long as UBL is disabled.
|
|
#define LULZBOT_G26_BACKWARDS_COMPATIBILITY
|
|
|
|
// The following should be kept more or less like M999
|
|
#define LULZBOT_G26_RESET_ACTION \
|
|
Running = true; \
|
|
lcd_reset_alert_level();
|
|
|
|
// Q&A wants to be able to use M226 on endstops switches
|
|
#define LULZBOT_NO_PIN_PROTECTION_ON_M226
|
|
|
|
// Marlin 1.1.5 has an issue where bed leveling is disabled when homing,
|
|
// this causes problems when rehoming X/Y after pausing a print. This
|
|
// bug has been reported upstream as bug #8670
|
|
#if defined(LULZBOT_USE_AUTOLEVELING)
|
|
#define LULZBOT_G28_DISABLES_LEVELING_WORKAROUND
|
|
#endif
|
|
|
|
// Marlin 1.1.5 does not respect ENDSTOPS_ALWAYS_ON_DEFAULT at startup,
|
|
// as described in T1393
|
|
#define LULZBOT_ENDSTOPS_ALWAYS_ON_DEFAULT_WORKAROUND
|
|
|
|
// Fix for OctoPrint serial buffer overflow when using auto temperature
|
|
// report.
|
|
// Back port of upstream https://github.com/MarlinFirmware/Marlin/commit/6ed284061580ffc6eef40df391afb30d2f8b45f5
|
|
#define LULZBOT_OCTOPRINT_RX_BUFFER_OVERFLOW_WORKAROUND delay(2);
|
|
|
|
// Fix for bug where the LCD is not being properly cleared at startup
|
|
#define LULZBOT_LCD_CLEAR_WORKAROUND
|
|
|
|
/************************* EXPERIMENTAL FEATURES ******************************/
|
|
|
|
#if defined(LULZBOT_USE_EXPERIMENTAL_FEATURES)
|
|
//#define LULZBOT_USE_STATUS_LED
|
|
|
|
// Enable linear advance, but leave K at zero so
|
|
// it is not used unless the user requests it.
|
|
#define LULZBOT_LIN_ADVANCE
|
|
#define LULZBOT_LIN_ADVANCE_K 0
|
|
#endif
|
|
|
|
/******************** MOTHERBOARD AND PIN CONFIGURATION ***********************/
|
|
|
|
#if defined(TOOLHEAD_Devel_ServoDual)
|
|
#undef LULZBOT_USE_HOME_BUTTON
|
|
#endif
|
|
|
|
// Whether endstops are inverting
|
|
#define LULZBOT_NORMALLY_CLOSED_ENDSTOP false
|
|
#define LULZBOT_NORMALLY_OPEN_ENDSTOP true
|
|
#define LULZBOT_NO_ENDSTOP true
|
|
|
|
#if defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_EINSYRAMBO)
|
|
// Experimental Mini retrofitted with EinsyRambo from UltiMachine
|
|
#define LULZBOT_MOTHERBOARD BOARD_EINSYRAMBO
|
|
#define LULZBOT_CONTROLLER_FAN_PIN FAN1_PIN // Digital pin 6
|
|
|
|
#elif defined(LULZBOT_IS_MINI)
|
|
#define LULZBOT_MOTHERBOARD BOARD_MINIRAMBO
|
|
#define LULZBOT_CONTROLLER_FAN_PIN FAN1_PIN // Digital pin 6
|
|
|
|
#elif defined(LULZBOT_IS_TAZ)
|
|
#define LULZBOT_MOTHERBOARD BOARD_RAMBO
|
|
#define LULZBOT_CONTROLLER_FAN_PIN FAN2_PIN // Digital pin 2
|
|
#endif
|
|
|
|
#if defined(LULZBOT_USE_HOME_BUTTON)
|
|
#define LULZBOT_Z_MIN_PROBE_ENDSTOP
|
|
#define LULZBOT_Z_MIN_PROBE_PIN SERVO0_PIN // Digital pin 22
|
|
// On the TAZ 6, the bed washers are on Z_MIN_PROBE while the
|
|
// Z-Home button is on Z_MIN, yet we need both to be disabled
|
|
// when z_probe_enabled is false. We added this special case
|
|
// to "endstops.cpp"
|
|
#define LULZBOT_Z_MIN_USES_Z_PROBE_ENABLED
|
|
|
|
#elif defined(LULZBOT_SENSORLESS_HOMING_Z)
|
|
/* When using stallguard for sensorless Z homing, "pins_EINSYRAMBO.h"
|
|
/* ties Z_MIN and Z_MAX to the diag output on the TMC. For the
|
|
/* electrical probe, we use the Z_MIN connector on the board. */
|
|
#define LULZBOT_Z_MIN_PROBE_ENDSTOP
|
|
#define LULZBOT_Z_MIN_PROBE_PIN BOARD_Z_MIN_PIN
|
|
|
|
#else
|
|
// The Mini and TAZ 7+ lack a home button and probe using the Z_MIN pin.
|
|
#define LULZBOT_Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
|
#endif
|
|
|
|
/*********************** HOMING & AXIS DIRECTIONS ******************************/
|
|
|
|
#define LULZBOT_INVERT_X_DIR false
|
|
#define LULZBOT_INVERT_Y_DIR true
|
|
#define LULZBOT_INVERT_Z_DIR false
|
|
#define LULZBOT_INVERT_E0_DIR true
|
|
#define LULZBOT_INVERT_E1_DIR true
|
|
|
|
#if defined(LULZBOT_IS_MINI)
|
|
#define LULZBOT_INVERT_X_HOME_DIR -1 // Home left
|
|
#define LULZBOT_INVERT_Y_HOME_DIR 1 // Home bed forward
|
|
#if defined(LULZBOT_SENSORLESS_HOMING_Z)
|
|
#define LULZBOT_INVERT_Z_HOME_DIR -1 // Home to bottom
|
|
#else
|
|
#define LULZBOT_INVERT_Z_HOME_DIR 1 // Home to top
|
|
#endif
|
|
#define LULZBOT_QUICKHOME
|
|
|
|
#elif defined(LULZBOT_Juniper_TAZ5)
|
|
#define LULZBOT_INVERT_X_HOME_DIR -1 // Home left
|
|
#define LULZBOT_INVERT_Y_HOME_DIR -1 // Home bed rear
|
|
#define LULZBOT_INVERT_Z_HOME_DIR -1 // Home towards bed
|
|
#define LULZBOT_QUICKHOME
|
|
|
|
#elif defined(LULZBOT_IS_TAZ) && !defined(LULZBOT_USE_HOME_BUTTON)
|
|
#define LULZBOT_INVERT_X_HOME_DIR -1 // Home left
|
|
#define LULZBOT_INVERT_Y_HOME_DIR 1 // Home bed forward
|
|
#define LULZBOT_INVERT_Z_HOME_DIR 1 // Home to top
|
|
#define LULZBOT_QUICKHOME
|
|
|
|
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_HOME_BUTTON)
|
|
#define LULZBOT_INVERT_X_HOME_DIR -1 // Home left
|
|
#define LULZBOT_INVERT_Y_HOME_DIR 1 // Home bed forward
|
|
#define LULZBOT_INVERT_Z_HOME_DIR -1 // Home towards bed
|
|
#define LULZBOT_QUICKHOME
|
|
#endif
|
|
|
|
#if defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_HOMING_FEEDRATE_XY (50*60) // mm/m
|
|
#define LULZBOT_HOMING_FEEDRATE_Z (40*60) // mm/m
|
|
|
|
#elif defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_SCREW)
|
|
#define LULZBOT_HOMING_FEEDRATE_XY (30*60) // mm/m
|
|
#define LULZBOT_HOMING_FEEDRATE_Z (8*60) // mm/m
|
|
|
|
#elif defined(LULZBOT_TAZ_BED) && defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_HOMING_FEEDRATE_XY (50*60) // mm/m
|
|
#define LULZBOT_HOMING_FEEDRATE_Z (10*60) // mm/m
|
|
|
|
#elif defined(LULZBOT_TAZ_BED) && defined(LULZBOT_USE_Z_SCREW)
|
|
#define LULZBOT_HOMING_FEEDRATE_XY (50*60) // mm/m
|
|
#define LULZBOT_HOMING_FEEDRATE_Z (3*60) // mm/m
|
|
|
|
#endif // LULZBOT_TAZ_BED
|
|
|
|
// Only the TAZ 6 has a Z-homing button
|
|
#if defined(LULZBOT_USE_HOME_BUTTON)
|
|
#define LULZBOT_Z_SAFE_HOMING
|
|
#define LULZBOT_Z_SAFE_HOMING_X_POINT (-19)
|
|
#define LULZBOT_Z_SAFE_HOMING_Y_POINT (258)
|
|
#define LULZBOT_Z_HOMING_HEIGHT 5
|
|
|
|
#define LULZBOT_AFTER_Z_HOME_Z_RAISE 10
|
|
#define LULZBOT_AFTER_Z_HOME_Z_ORIGIN 0
|
|
|
|
#define LULZBOT_HOMING_USES_PROBE_PINS
|
|
#elif defined(LULZBOT_IS_TAZ) && !defined(LULZBOT_USE_HOME_BUTTON)
|
|
// TAZ 5 safe homing position so fan duct does not hit.
|
|
#define LULZBOT_Z_SAFE_HOMING
|
|
#define LULZBOT_Z_SAFE_HOMING_X_POINT 10
|
|
#define LULZBOT_Z_SAFE_HOMING_Y_POINT 10
|
|
#define LULZBOT_Z_HOMING_HEIGHT 5
|
|
#else
|
|
// On the Mini, raise nozzle to clear wiper pad before homing
|
|
#define LULZBOT_Z_HOMING_HEIGHT 4
|
|
#endif // LULZBOT_USE_HOME_BUTTON
|
|
|
|
#define LULZBOT_G92_Z(z) \
|
|
stepper.synchronize(); \
|
|
current_position[Z_AXIS] = z; \
|
|
SYNC_PLAN_POSITION_KINEMATIC();
|
|
|
|
#define LULZBOT_G0_Z(z) \
|
|
do_blocking_move_to_z(z);
|
|
|
|
// On a TAZ, we need to raise the print head after homing to clear the button;
|
|
// On the yellowfin we also need to reset the origin to account for the Z home riser.
|
|
|
|
#if defined(LULZBOT_USE_HOME_BUTTON)
|
|
#define LULZBOT_AFTER_Z_HOME_ACTION \
|
|
if(home_all || homeZ) { \
|
|
LULZBOT_G92_Z(LULZBOT_AFTER_Z_HOME_Z_ORIGIN); \
|
|
LULZBOT_G0_Z(LULZBOT_AFTER_Z_HOME_Z_RAISE); \
|
|
}
|
|
#else
|
|
#define LULZBOT_AFTER_Z_HOME_ACTION
|
|
#endif
|
|
|
|
// Enable NO_MOTION_BEFORE_HOMING on newer printers that have no MAX endstops,
|
|
// but leave TAZ5 as is so we don't introduce a change for those users.
|
|
#if !defined(LULZBOT_USE_MAX_ENDSTOPS) && !defined(LULZBOT_Juniper_TAZ5)
|
|
#define LULZBOT_NO_MOTION_BEFORE_HOMING
|
|
#endif
|
|
|
|
/************************ STEPPER INACTIVITY TIMEOUT ****************************/
|
|
|
|
#if !defined(LULZBOT_USE_MAX_ENDSTOPS)
|
|
#define LULZBOT_HOME_AFTER_DEACTIVATE
|
|
#endif
|
|
|
|
#if defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_DISABLE_INACTIVE_Z false
|
|
#define LULZBOT_ENABLE_Z_MOTOR_ON_STARTUP enable_Z();
|
|
#else
|
|
#define LULZBOT_DISABLE_INACTIVE_Z true
|
|
#define LULZBOT_ENABLE_Z_MOTOR_ON_STARTUP
|
|
#endif
|
|
|
|
/*********************** AUTOLEVELING / BED PROBE *******************************/
|
|
|
|
#if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_LEFT_PROBE_BED_POSITION -6
|
|
#define LULZBOT_RIGHT_PROBE_BED_POSITION 162
|
|
#define LULZBOT_BACK_PROBE_BED_POSITION 164
|
|
#define LULZBOT_FRONT_PROBE_BED_POSITION -9
|
|
|
|
#elif defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED)
|
|
// In order to work with the Gladiola printers, we need to
|
|
// perform the probe right against the left and front endstops.
|
|
// This is extremely problematic and leads to other problems
|
|
// which are corrected for in the start GCODE.
|
|
#define LULZBOT_LEFT_PROBE_BED_POSITION LULZBOT_X_MIN_POS
|
|
#define LULZBOT_FRONT_PROBE_BED_POSITION LULZBOT_Y_MIN_POS
|
|
|
|
// The Gladiola has the probe points spaced further apart than
|
|
// earlier models. Since Gladiola FW has to work on earlier
|
|
// printers, we need to add a workaround because G29 hits the
|
|
// endstops and shifts the coordinate system around.
|
|
#define LULZBOT_RIGHT_PROBE_BED_POSITION 161
|
|
#define LULZBOT_BACK_PROBE_BED_POSITION 161
|
|
#define LULZBOT_USE_PRE_GLADIOLA_G29_WORKAROUND
|
|
|
|
#elif defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_TAZ_BED)
|
|
#define LULZBOT_LEFT_PROBE_BED_POSITION -9
|
|
#define LULZBOT_RIGHT_PROBE_BED_POSITION 288
|
|
#define LULZBOT_BACK_PROBE_BED_POSITION 289
|
|
#define LULZBOT_FRONT_PROBE_BED_POSITION -9
|
|
#endif
|
|
|
|
#if defined(LULZBOT_USE_AUTOLEVELING)
|
|
#define LULZBOT_NOZZLE_CLEAN_FEATURE
|
|
// Select type of leveling to use:
|
|
//#define LULZBOT_AUTO_BED_LEVELING_BILINEAR
|
|
#define LULZBOT_AUTO_BED_LEVELING_LINEAR
|
|
//#define LULZBOT_AUTO_BED_LEVELING_3POINT
|
|
#endif
|
|
|
|
#if defined(LULZBOT_AUTO_BED_LEVELING_3POINT)
|
|
// Experimental three point leveling.
|
|
#define LULZBOT_ABL_PROBE_PT_1_X LULZBOT_LEFT_PROBE_BED_POSITION
|
|
#define LULZBOT_ABL_PROBE_PT_1_Y LULZBOT_FRONT_PROBE_BED_POSITION
|
|
#define LULZBOT_ABL_PROBE_PT_2_X LULZBOT_RIGHT_PROBE_BED_POSITION
|
|
#define LULZBOT_ABL_PROBE_PT_2_Y LULZBOT_FRONT_PROBE_BED_POSITION
|
|
#define LULZBOT_ABL_PROBE_PT_3_X LULZBOT_RIGHT_PROBE_BED_POSITION
|
|
#define LULZBOT_ABL_PROBE_PT_3_Y LULZBOT_BACK_PROBE_BED_POSITION
|
|
#elif defined(LULZBOT_AUTO_BED_LEVELING_LINEAR) || defined(LULZBOT_AUTO_BED_LEVELING_BILINEAR)
|
|
// Traditionally LulzBot printers have employed a four-point leveling
|
|
// using a degenerate 2x2 grid. This is the traditional behavior.
|
|
#define LULZBOT_GRID_MAX_POINTS_X 2
|
|
#define LULZBOT_GRID_MAX_POINTS_Y 2
|
|
#if defined(LULZBOT_IS_MINI)
|
|
// We can't control the order of probe points exactly, but
|
|
// this makes the probe start closer to the wiper pad.
|
|
#define LULZBOT_PROBE_Y_FIRST
|
|
#else
|
|
// Restore the old probe sequence on the TAZ that starts
|
|
// probing on the washer underneath the wiper pad.
|
|
#define LULZBOT_LAST_PROBE_POINT_ON_BACK_LEFT_CORNER
|
|
#endif
|
|
#endif
|
|
|
|
/* Make sure Marlin allows probe points outside of the bed area */
|
|
#if defined(LULZBOT_USE_AUTOLEVELING)
|
|
#if LULZBOT_Z_SAFE_HOMING_X_POINT < LULZBOT_LEFT_PROBE_BED_POSITION
|
|
#define MIN_PROBE_X LULZBOT_Z_SAFE_HOMING_X_POINT
|
|
#else
|
|
#define MIN_PROBE_X LULZBOT_LEFT_PROBE_BED_POSITION
|
|
#endif
|
|
#define MAX_PROBE_X LULZBOT_RIGHT_PROBE_BED_POSITION
|
|
|
|
#define MIN_PROBE_Y LULZBOT_FRONT_PROBE_BED_POSITION
|
|
#define MAX_PROBE_Y LULZBOT_BACK_PROBE_BED_POSITION
|
|
#endif
|
|
|
|
/* Auto-leveling was introduced on the Mini and TAZ 6.
|
|
* Define probe parameters related to bed leveling,
|
|
* e.g. the washers on the bed. These are confusingly
|
|
* named Z_MIN_PROBE in Marlin. The Z-Home switch
|
|
* is called Z_MIN_ENDSTOP
|
|
*/
|
|
#if defined(LULZBOT_USE_AUTOLEVELING)
|
|
#define LULZBOT_FIX_MOUNTED_PROBE
|
|
#endif // LULZBOT_USE_AUTOLEVELING
|
|
|
|
#define LULZBOT_MULTIPLE_PROBING 2
|
|
#define LULZBOT_X_PROBE_OFFSET_FROM_EXTRUDER 0
|
|
#define LULZBOT_Y_PROBE_OFFSET_FROM_EXTRUDER 0
|
|
#define LULZBOT_Z_PROBE_OFFSET_RANGE_MIN -2
|
|
#define LULZBOT_Z_PROBE_OFFSET_RANGE_MAX 5
|
|
#define LULZBOT_XY_PROBE_SPEED 6000
|
|
#define LULZBOT_Z_PROBE_SPEED_SLOW (1*60)
|
|
#if defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_Z_PROBE_SPEED_FAST (50*60)
|
|
#else
|
|
#define LULZBOT_Z_PROBE_SPEED_FAST (8*60)
|
|
#endif
|
|
#define LULZBOT_Z_CLEARANCE_DEPLOY_PROBE_WORKAROUND
|
|
#define LULZBOT_Z_CLEARANCE_DEPLOY_PROBE 5
|
|
#define LULZBOT_Z_CLEARANCE_BETWEEN_PROBES 5
|
|
|
|
/* We need to disable the extruder motor during probing as
|
|
it causes noise on the probe line of some Minis.
|
|
*/
|
|
#if defined(LULZBOT_IS_MINI)
|
|
#define LULZBOT_EXTRUDER_MOTOR_SHUTOFF_ON_PROBE(probing) \
|
|
if(probing) { \
|
|
disable_E0(); \
|
|
} else { \
|
|
enable_E0(); \
|
|
}
|
|
#else
|
|
#define LULZBOT_EXTRUDER_MOTOR_SHUTOFF_ON_PROBE(probing)
|
|
#endif
|
|
|
|
/* Enable the probe pins only only when homing/probing,
|
|
* as this helps reduce EMI by grounding the lines.
|
|
*
|
|
* On Mini:
|
|
* Z_MIN_PIN are the bed washers.
|
|
*
|
|
* On TAZ:
|
|
* Z_MIN_PIN corresponds to the Z-Home push button.
|
|
* Z_MIN_PROBE_PIN are the bed washers.
|
|
*
|
|
* On TAZ or Mini with TMC2130 and Sensorless Homing on Z:
|
|
* Z_MIN_PIN corresponds to stallguard diag pin
|
|
* Z_MIN_PROBE_PIN are the bed washers.
|
|
*/
|
|
#define LULZBOT_SET_PIN_STATE(pin, enable) \
|
|
if(enable) { \
|
|
/* Set as inputs with pull-up resistor */ \
|
|
SET_INPUT(pin); \
|
|
WRITE(pin, HIGH); \
|
|
} else { \
|
|
/* Ground to prevent EMI */ \
|
|
SET_OUTPUT(pin); \
|
|
WRITE(pin, LOW); \
|
|
}
|
|
|
|
#if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_SENSORLESS_HOMING_Z)
|
|
#define LULZBOT_ENABLE_PROBE_PINS(enable) { \
|
|
endstops.enable_z_probe(enable); \
|
|
LULZBOT_SET_PIN_STATE(LULZBOT_Z_MIN_PROBE_PIN, enable) \
|
|
LULZBOT_EXTRUDER_MOTOR_SHUTOFF_ON_PROBE(enable) \
|
|
}
|
|
|
|
#elif defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED)
|
|
#define LULZBOT_ENABLE_PROBE_PINS(enable) { \
|
|
endstops.enable_z_probe(enable); \
|
|
LULZBOT_SET_PIN_STATE(Z_MIN_PIN, enable) \
|
|
LULZBOT_EXTRUDER_MOTOR_SHUTOFF_ON_PROBE(enable) \
|
|
}
|
|
|
|
#elif defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_USE_HOME_BUTTON)
|
|
#define LULZBOT_ENABLE_PROBE_PINS(enable) { \
|
|
endstops.enable_z_probe(enable); \
|
|
LULZBOT_SET_PIN_STATE(Z_MIN_PIN, enable) \
|
|
LULZBOT_SET_PIN_STATE(LULZBOT_Z_MIN_PROBE_PIN, enable) \
|
|
}
|
|
#else
|
|
#define LULZBOT_ENABLE_PROBE_PINS(enable)
|
|
#endif
|
|
|
|
/* Make it so M42 S<state> controls the state of the
|
|
/* probe lines. This is useful for troubleshooting. */
|
|
#define LULZBOT_M42_TOGGLES_PROBE_PINS \
|
|
if (!parser.seenval('P')) { \
|
|
LULZBOT_ENABLE_PROBE_PINS(pin_status); \
|
|
return; \
|
|
}
|
|
|
|
/*************************** COMMON TOOLHEADS PARAMETERS ***********************/
|
|
|
|
#define LULZBOT_DEFAULT_EJERK 10.0
|
|
|
|
/**************************** MINI TOOLHEADS ***********************************/
|
|
|
|
#if defined(TOOLHEAD_Gladiola_SingleExtruder) || defined(TOOLHEAD_Albatross_Flexystruder) || defined(TOOLHEAD_Finch_Aerostruder) || defined(TOOLHEAD_Finch_AerostruderV2)
|
|
#define LULZBOT_EXTRUDERS 1
|
|
#define LULZBOT_TOOLHEAD_X_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_X_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Y_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Y_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Z_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Z_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0
|
|
|
|
#if defined(LULZBOT_USE_EINSYRAMBO)
|
|
#define LULZBOT_MOTOR_CURRENT_E 960 // mA
|
|
#else
|
|
#define LULZBOT_MOTOR_CURRENT_E 1250 // mA
|
|
#endif
|
|
#endif /* TOOLHEAD_Gladiola_SingleExtruder || TOOLHEAD_Albatross_Flexystruder || TOOLHEAD_Finch_Aerostruder */
|
|
|
|
#if defined(TOOLHEAD_Gladiola_SingleExtruder)
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "Single Extruder"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "SingleExtruder"
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_AO_Hexagon
|
|
#define LULZBOT_E_STEPS 833
|
|
#endif /* TOOLHEAD_Gladiola_SingleExtruder */
|
|
|
|
#if defined(TOOLHEAD_Albatross_Flexystruder)
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "Flexystruder"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "Flexystruder"
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_AO_Hexagon
|
|
#define LULZBOT_E_STEPS 833
|
|
#endif /* TOOLHEAD_Albatross_Flexystruder */
|
|
|
|
#if defined(TOOLHEAD_Finch_Aerostruder)
|
|
// Prototype Aero toolhead for Mini
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "Aerostruder"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "Aerostruder"
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_E3D_Titan_Aero
|
|
#define LULZBOT_E_STEPS 420
|
|
#endif /* TOOLHEAD_Finch_Aerostruder */
|
|
|
|
/******************************** Mini 2 / TAZ 7 TOOLHEADS *********************/
|
|
|
|
#if defined(TOOLHEAD_Finch_AerostruderV2)
|
|
// Prototype Aero toolhead for Mini
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "Aerostruder v2"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "Aerostruder"
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP
|
|
#define LULZBOT_E3D_Titan_Aero
|
|
#define LULZBOT_E_STEPS 420
|
|
#endif /* TOOLHEAD_Finch_AerostruderV2 */
|
|
|
|
/******************************** TAZ TOOLHEADS ********************************/
|
|
|
|
#if defined(TOOLHEAD_Tilapia_SingleExtruder) || defined(TOOLHEAD_Angelfish_Aerostruder)
|
|
#define LULZBOT_EXTRUDERS 1
|
|
#define LULZBOT_TOOLHEAD_X_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_X_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Y_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Y_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Z_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Z_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0
|
|
#endif /* TOOLHEAD_Tilapia_SingleExtruder || TOOLHEAD_Angelfish_Aerostruder */
|
|
|
|
#if defined(TOOLHEAD_Tilapia_SingleExtruder)
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "Single Extruder"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "SingleExtruder"
|
|
#define LULZBOT_MOTOR_CURRENT_E 750 // mA
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP
|
|
#define LULZBOT_AO_Hexagon
|
|
#define LULZBOT_E_STEPS 830
|
|
#endif /* TOOLHEAD_Tilapia_SingleExtruder */
|
|
|
|
#if defined(TOOLHEAD_Angelfish_Aerostruder)
|
|
// Prototype Aero for TAZ
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "Aerostruder"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "Aerostruder"
|
|
#define LULZBOT_MOTOR_CURRENT_E 875 // mA
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP
|
|
#define LULZBOT_E3D_Titan_Aero
|
|
#define LULZBOT_E_STEPS 420
|
|
#endif /* TOOLHEAD_Angelfish_Aerostruder */
|
|
|
|
#if defined(TOOLHEAD_Kanyu_Flexystruder)
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "Flexystruder"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "Flexystruder"
|
|
#define LULZBOT_MOTOR_CURRENT_E 410 // mA
|
|
#define LULZBOT_EXTRUDERS 1
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_TOOLHEAD_X_MAX_ADJ -12
|
|
#define LULZBOT_TOOLHEAD_X_MIN_ADJ -7
|
|
#define LULZBOT_TOOLHEAD_Y_MAX_ADJ -1
|
|
#define LULZBOT_TOOLHEAD_Y_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Z_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Z_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0
|
|
#define LULZBOT_AO_Hexagon
|
|
#define LULZBOT_E_STEPS 830
|
|
#endif /* TOOLHEAD_Kanyu_Flexystruder */
|
|
|
|
#if defined(TOOLHEAD_Opah_Moarstruder)
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "MOARstruder"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "MOARstruder"
|
|
#define LULZBOT_DEFAULT_ACCELERATION 250
|
|
#define LULZBOT_DEFAULT_TRAVEL_ACCELERATION 250
|
|
#define LULZBOT_MOTOR_CURRENT_E 750 // mA
|
|
#define LULZBOT_EXTRUDERS 1
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_TOOLHEAD_X_MAX_ADJ -10
|
|
#define LULZBOT_TOOLHEAD_X_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Y_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Y_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Z_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Z_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0
|
|
#define LULZBOT_Moarstruder
|
|
#define LULZBOT_E_STEPS 830
|
|
#endif /* TOOLHEAD_Opah_Moarstruder */
|
|
|
|
#if defined(TOOLHEAD_Javelin_DualExtruderV2) || defined(TOOLHEAD_Longfin_FlexyDually) || defined(TOOLHEAD_Yellowfin_DualExtruderV3) || defined(TOOLHEAD_Devel_ServoDual)
|
|
#define LULZBOT_EXTRUDER_FAN_ON_PIN_6 // For backwards compatibility with TAZ 4
|
|
#define LULZBOT_MOTOR_CURRENT_E0 875 // mA
|
|
#define LULZBOT_MOTOR_CURRENT_E1 875 // mA
|
|
#define LULZBOT_EXTRUDERS 2
|
|
#define LULZBOT_TOOLHEAD_X_MAX_ADJ -12
|
|
#define LULZBOT_TOOLHEAD_X_MIN_ADJ -2
|
|
#define LULZBOT_TOOLHEAD_Y_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Y_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Z_MAX_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_Z_MIN_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0
|
|
#define LULZBOT_TEMP_SENSOR_1 5
|
|
#define LULZBOT_NO_MOVE_ON_TOOLHEAD_CHANGE
|
|
#define LULZBOT_DISTINCT_E_FACTORS
|
|
#endif /* TOOLHEAD_Javelin_DualExtruderV2 || TOOLHEAD_Longfin_FlexyDually || TOOLHEAD_Yellowfin_DualExtruderV3 */
|
|
|
|
#if defined(TOOLHEAD_Javelin_DualExtruderV2)
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "Dual Extruder 2"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "DualExtruder v2"
|
|
#define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 48
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_E_STEPS 830
|
|
#define LULZBOT_AO_Hexagon
|
|
#endif /* TOOLHEAD_Javelin_DualExtruderV2 */
|
|
|
|
#if defined(TOOLHEAD_Longfin_FlexyDually)
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "FlexyDually v2"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "FlexyDually v2"
|
|
#define LULZBOT_TOOLHEAD_WIPE_X1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_X2_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 48
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_E_STEPS 830
|
|
#define LULZBOT_AO_Hexagon
|
|
#endif /* TOOLHEAD_Longfin_FlexyDually */
|
|
|
|
#if defined(TOOLHEAD_Yellowfin_DualExtruderV3)
|
|
// Prototype Dual v3 for TAZ.
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "Dual Extruder 3"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "DualExtruder v3"
|
|
#undef LULZBOT_AFTER_Z_HOME_Z_RAISE
|
|
#define LULZBOT_AFTER_Z_HOME_Z_RAISE 16
|
|
#undef LULZBOT_AFTER_Z_HOME_Z_ORIGIN
|
|
#define LULZBOT_AFTER_Z_HOME_Z_ORIGIN 5.5
|
|
#define LULZBOT_TOOLHEAD_X_MIN_ADJ 1
|
|
#define LULZBOT_TOOLHEAD_X_MAX_ADJ -7
|
|
#define LULZBOT_TOOLHEAD_Y_MIN_ADJ -7
|
|
#define LULZBOT_TOOLHEAD_Y_MAX_ADJ -7
|
|
#define LULZBOT_TOOLHEAD_WIPE_X1_ADJ -2
|
|
#define LULZBOT_TOOLHEAD_WIPE_X2_ADJ -2
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y1_ADJ 0
|
|
#define LULZBOT_TOOLHEAD_WIPE_Y2_ADJ 0
|
|
#undef LULZBOT_Z_HOMING_HEIGHT
|
|
#define LULZBOT_Z_HOMING_HEIGHT 10
|
|
#undef LULZBOT_Z_CLEARANCE_DEPLOY_PROBE
|
|
#define LULZBOT_Z_CLEARANCE_DEPLOY_PROBE 10
|
|
#undef LULZBOT_Z_CLEARANCE_BETWEEN_PROBES
|
|
#define LULZBOT_Z_CLEARANCE_BETWEEN_PROBES 10
|
|
// Move the rear homing position back to avoid the Z homing adaptor
|
|
#undef LULZBOT_BACK_PROBE_BED_POSITION
|
|
#define LULZBOT_BACK_PROBE_BED_POSITION 291
|
|
// Adjust so left nozzle probes on the left washers;
|
|
// right nozzles on the right nozzle.
|
|
#undef LULZBOT_LEFT_PROBE_BED_POSITION
|
|
#define LULZBOT_LEFT_PROBE_BED_POSITION -3
|
|
#undef LULZBOT_RIGHT_PROBE_BED_POSITION
|
|
#define LULZBOT_RIGHT_PROBE_BED_POSITION 282
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP
|
|
#define LULZBOT_SWAP_EXTRUDERS
|
|
#undef LULZBOT_INVERT_E1_DIR
|
|
#define LULZBOT_INVERT_E1_DIR false
|
|
#define LULZBOT_E_STEPS 760
|
|
#define LULZBOT_E3D_SOMEstruder_x2
|
|
#endif /* TOOLHEAD_Yellowfin_DualExtruderV3 */
|
|
|
|
#if defined(TOOLHEAD_Devel_ServoDual)
|
|
// Experimental dual nozzle using a servo
|
|
#define LULZBOT_LCD_TOOLHEAD_NAME "Servo McStruder"
|
|
// 16 chars max ^^^^^^^^^^^^^^^
|
|
#define LULZBOT_M115_EXTRUDER_TYPE "ServoMcStruder"
|
|
#define LULZBOT_NUM_SERVOS 1
|
|
#define LULZBOT_SWITCHING_EXTRUDER_NO_REVERSE
|
|
#define LULZBOT_SWITCHING_EXTRUDER
|
|
#define LULZBOT_SWITCHING_NOZZLE
|
|
#define LULZBOT_SWITCHING_SERVO_ANGLES { 0, 67 }
|
|
#undef LULZBOT_TOOLHEAD_X_MIN_ADJ
|
|
#define LULZBOT_TOOLHEAD_X_MIN_ADJ -14
|
|
#define LULZBOT_E_STEPS 420
|
|
#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NO_ENDSTOP
|
|
#define LULZBOT_AO_Hexagon
|
|
#endif /* TOOLHEAD_Devel_ServoDual */
|
|
|
|
/************************ CUSTOMIZE VERSION STRING ***************************/
|
|
|
|
// The Makefile and build-lulzbot-firmware.sh has an option to generate
|
|
// firmware without any identifying version or build timestamp. This is
|
|
// used in internal testing to allow us to binary diff across .hex files.
|
|
#if defined(LULZBOT_MASK_VERSION)
|
|
#undef LULZBOT_FW_VERSION
|
|
#define LULZBOT_FW_VERSION ".xx"
|
|
#endif
|
|
|
|
#define LULZBOT_DETAILED_BUILD_VERSION " FIRMWARE_VERSION:" SHORT_BUILD_VERSION LULZBOT_FW_VERSION " EXTRUDER_TYPE:" LULZBOT_M115_EXTRUDER_TYPE
|
|
#define LULZBOT_STRING_DISTRIBUTION_DATE __DATE__ __TIME__
|
|
#define LULZBOT_SOURCE_CODE_URL "https://code.alephobjects.com/diffusion/MARLIN"
|
|
|
|
/*************************** TEMPERATURE SETTINGS *****************************/
|
|
|
|
#define LULZBOT_TEMP_SENSOR_0 5
|
|
#define LULZBOT_TEMP_SENSOR_BED 7
|
|
#define LULZBOT_TEMP_RESIDENCY_TIME 1
|
|
#define LULZBOT_TEMP_HYSTERESIS 10
|
|
#define LULZBOT_TEMP_WINDOW 10
|
|
|
|
#define LULZBOT_TEMP_BED_RESIDENCY_TIME 1
|
|
#define LULZBOT_TEMP_BED_HYSTERESIS 5
|
|
#define LULZBOT_TEMP_BED_WINDOW 5
|
|
|
|
#define LULZBOT_HEATER_MAXTEMP 305
|
|
#define LULZBOT_EXTRUDE_MINTEMP 120
|
|
|
|
#define LULZBOT_THERMAL_PROTECTION_PERIOD 15 // Seconds
|
|
#define LULZBOT_THERMAL_PROTECTION_HYSTERESIS 30 // Degrees Celsius
|
|
|
|
#define LULZBOT_THERMAL_PROTECTION_BED_PERIOD 15 // Seconds
|
|
#define LULZBOT_THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius
|
|
|
|
#if defined(LULZBOT_IS_MINI)
|
|
// Heater current: 24V/5.5 Ohms = 4.4A
|
|
#define LULZBOT_MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
|
#define LULZBOT_WATCH_TEMP_PERIOD 20 // Seconds
|
|
#define LULZBOT_WATCH_TEMP_INCREASE 2 // Degrees Celsius
|
|
#elif defined(LULZBOT_IS_TAZ)
|
|
// Heater current: 24V/1.6 Ohms = 15A
|
|
// Set Max Bed Power to 80% for a safety margin on the 15A fuse.
|
|
#define LULZBOT_MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current
|
|
#define LULZBOT_WATCH_TEMP_PERIOD 40 // Seconds
|
|
#define LULZBOT_WATCH_TEMP_INCREASE 10 // Degrees Celsius
|
|
#endif
|
|
|
|
// Marlin 1.1.5 no longer issues MIN_TEMP errors and appears to handle
|
|
// thermal runaway via other means. However, since our users expect a
|
|
// MIN_TEMP error when disconnecting their print head, this could be
|
|
// perceived as a safety issue. This is a workaround in "temperature.cpp"
|
|
// to re-enable that functionality.
|
|
|
|
#define LULZBOT_MIN_TEMP_WORKAROUND \
|
|
static int delayBeforeStartMeasuring = OVERSAMPLENR; \
|
|
if(delayBeforeStartMeasuring > 0) { \
|
|
delayBeforeStartMeasuring--; \
|
|
} else { \
|
|
if (current_temperature[e] > HEATER_0_MAXTEMP) max_temp_error(0); \
|
|
if (current_temperature[e] < HEATER_0_MINTEMP) min_temp_error(0); \
|
|
}
|
|
|
|
/******************************** HEATING ELEMENTS *****************************/
|
|
|
|
#define LULZBOT_PIDTEMP
|
|
#define LULZBOT_PIDTEMPBED
|
|
|
|
// Hotend variants
|
|
|
|
#if defined(LULZBOT_Moarstruder)
|
|
// LulzBot MOARstruder (40v)
|
|
#define LULZBOT_DEFAULT_Kp 55.64
|
|
#define LULZBOT_DEFAULT_Ki 6.79
|
|
#define LULZBOT_DEFAULT_Kd 113.94
|
|
#endif /* LULZBOT_Moarstruder */
|
|
|
|
#if defined(LULZBOT_E3D_SOMEstruder_x2)
|
|
// Side-by-side LulzBot E3D SOMEstruder (24v) on Yellowfin Dual
|
|
#define LULZBOT_DEFAULT_Kp 47.45
|
|
#define LULZBOT_DEFAULT_Ki 4.83
|
|
#define LULZBOT_DEFAULT_Kd 116.63
|
|
#endif /* LULZBOT_E3D_SOMEstruder_x2 */
|
|
|
|
#if defined(LULZBOT_AO_Hexagon)
|
|
// LulzBot AO-Hexagon (24v)
|
|
#define LULZBOT_DEFAULT_Kp 28.79
|
|
#define LULZBOT_DEFAULT_Ki 1.91
|
|
#define LULZBOT_DEFAULT_Kd 108.51
|
|
#endif /* LULZBOT_AO_Hexagon */
|
|
|
|
#if defined(LULZBOT_E3D_Titan_Aero)
|
|
// LulzBot V6 block with E3D Titan Aero
|
|
#define LULZBOT_DEFAULT_Kp 21.00
|
|
#define LULZBOT_DEFAULT_Ki 1.78
|
|
#define LULZBOT_DEFAULT_Kd 61.93
|
|
#endif /* LULZBOT_E3D_Titan_Aero */
|
|
|
|
// Heated bed variants
|
|
|
|
//24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+)
|
|
#if defined(LULZBOT_TAZ_BED) && !defined(LULZBOT_TWO_PIECE_BED)
|
|
#define LULZBOT_DEFAULT_bedKp 162
|
|
#define LULZBOT_DEFAULT_bedKi 17
|
|
#define LULZBOT_DEFAULT_bedKd 378
|
|
|
|
// Modular two piece bed (TAZ 7+)
|
|
#elif defined(LULZBOT_TAZ_BED) && defined(LULZBOT_TWO_PIECE_BED)
|
|
#define LULZBOT_DEFAULT_bedKp 286.02
|
|
#define LULZBOT_DEFAULT_bedKi 54.55
|
|
#define LULZBOT_DEFAULT_bedKd 374.90
|
|
|
|
//24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+)
|
|
#elif defined(LULZBOT_MINI_BED) && !defined(LULZBOT_TWO_PIECE_BED)
|
|
#define LULZBOT_DEFAULT_bedKp 294
|
|
#define LULZBOT_DEFAULT_bedKi 65
|
|
#define LULZBOT_DEFAULT_bedKd 382
|
|
|
|
// Modular two piece bed (Mini 2+)
|
|
#elif defined(LULZBOT_MINI_BED) && defined(LULZBOT_TWO_PIECE_BED)
|
|
#define LULZBOT_DEFAULT_bedKp 384.33
|
|
#define LULZBOT_DEFAULT_bedKi 72.17
|
|
#define LULZBOT_DEFAULT_bedKd 511.64
|
|
#endif
|
|
|
|
/****************************** FAN CONFIGURATION ******************************/
|
|
|
|
// For the Pelonis C4010L24BPLB1b-7 fan, we need a relative low
|
|
// PWM frequency of about 122Hz in order for the fan to turn.
|
|
// By default, FAST_PWM_FAN appears to PWM at ~31kHz, but if we
|
|
// set a prescale of 4, it divides this by 256 to get us down to
|
|
// the frequency we need.
|
|
|
|
#define LULZBOT_FAST_PWM_FAN
|
|
#define LULZBOT_FAST_PWM_SCALE 4
|
|
|
|
#define LULZBOT_FAN_KICKSTART_TIME 100
|
|
#define LULZBOT_FAN_MIN_PWM 70
|
|
|
|
#define LULZBOT_USE_CONTROLLER_FAN
|
|
#if defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_EINSYRAMBO)
|
|
// The TMC drivers need a bit more cooling.
|
|
#define LULZBOT_CONTROLLERFAN_SPEED 255
|
|
#define LULZBOT_CONTROLLERFAN_SPEED_WHEN_ONLY_Z_ACTIVE 120
|
|
#elif defined(LULZBOT_IS_MINI)
|
|
// The Mini fan runs rather loud at full speed.
|
|
#define LULZBOT_CONTROLLERFAN_SPEED 120
|
|
#elif defined(LULZBOT_IS_TAZ)
|
|
#define LULZBOT_CONTROLLERFAN_SPEED 255
|
|
#endif
|
|
|
|
// As of Marlin 1.1.5, FAST_PWM_FAN adjusts the frequencies for
|
|
// all fans except the controller fan. This workaround allows
|
|
// the controller fan PWM freq to be adjusted to 122Hz (this
|
|
// may not be necessary, but since the Pelonis fan likes 122Hz,
|
|
// we are trying to keep all the fan frequencies at that).
|
|
#define LULZBOT_FAST_PWM_CONTROLLER_FAN_WORKAROUND
|
|
|
|
/******************************* AXIS TRAVEL LIMITS *****************************/
|
|
|
|
/* Define min and max travel limits based on the printer model using a standard
|
|
* toolhead, then define adjustments from the standard for alternative toolheads.
|
|
* This allows us to accomodate toolheads that might be wider or taller than the
|
|
* standard.
|
|
*/
|
|
|
|
#if defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_SCREW)
|
|
#define LULZBOT_STANDARD_X_MAX_POS 162
|
|
#define LULZBOT_STANDARD_X_MIN_POS -3
|
|
#define LULZBOT_STANDARD_Y_MAX_POS 190
|
|
#define LULZBOT_STANDARD_Y_MIN_POS -7
|
|
|
|
#define LULZBOT_X_BED_SIZE 155
|
|
#define LULZBOT_Y_BED_SIZE 155
|
|
|
|
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_STANDARD_X_MAX_POS 162
|
|
#define LULZBOT_STANDARD_X_MIN_POS -6
|
|
#define LULZBOT_STANDARD_Y_MAX_POS 188
|
|
#define LULZBOT_STANDARD_Y_MIN_POS -9
|
|
|
|
#define LULZBOT_X_BED_SIZE 157
|
|
#define LULZBOT_Y_BED_SIZE 157
|
|
|
|
#elif defined(LULZBOT_Juniper_TAZ5)
|
|
#define LULZBOT_STANDARD_X_MAX_POS 298
|
|
#define LULZBOT_STANDARD_X_MIN_POS 0
|
|
#define LULZBOT_STANDARD_Y_MAX_POS 276
|
|
#define LULZBOT_STANDARD_Y_MIN_POS 0
|
|
|
|
#define LULZBOT_X_BED_SIZE 288
|
|
#define LULZBOT_Y_BED_SIZE 275
|
|
|
|
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_STANDARD_X_MAX_POS 300
|
|
#define LULZBOT_STANDARD_X_MIN_POS -16
|
|
#define LULZBOT_STANDARD_Y_MAX_POS 303
|
|
#define LULZBOT_STANDARD_Y_MIN_POS -20
|
|
|
|
#define LULZBOT_X_BED_SIZE 280
|
|
#define LULZBOT_Y_BED_SIZE 280
|
|
|
|
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_Z_SCREW)
|
|
#define LULZBOT_STANDARD_X_MAX_POS 300
|
|
#define LULZBOT_STANDARD_X_MIN_POS -20
|
|
#define LULZBOT_STANDARD_Y_MAX_POS 303
|
|
#define LULZBOT_STANDARD_Y_MIN_POS -20
|
|
|
|
#define LULZBOT_X_BED_SIZE 280
|
|
#define LULZBOT_Y_BED_SIZE 280
|
|
#endif
|
|
|
|
#if defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_SCREW)
|
|
#define LULZBOT_STANDARD_Z_MIN_POS -2
|
|
#define LULZBOT_STANDARD_Z_MAX_POS 159
|
|
|
|
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT) && defined(LULZBOT_SENSORLESS_HOMING_Z)
|
|
#define LULZBOT_STANDARD_Z_MIN_POS -3.5
|
|
#define LULZBOT_STANDARD_Z_MAX_POS 183
|
|
|
|
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_STANDARD_Z_MIN_POS 0
|
|
#define LULZBOT_STANDARD_Z_MAX_POS 183
|
|
|
|
#elif defined(LULZBOT_Juniper_TAZ5)
|
|
#define LULZBOT_STANDARD_Z_MIN_POS 0
|
|
#define LULZBOT_STANDARD_Z_MAX_POS 250
|
|
|
|
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_Z_SCREW)
|
|
#define LULZBOT_STANDARD_Z_MIN_POS 0
|
|
#define LULZBOT_STANDARD_Z_MAX_POS 270
|
|
|
|
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_STANDARD_Z_MIN_POS 0
|
|
#define LULZBOT_STANDARD_Z_MAX_POS 299
|
|
#endif
|
|
|
|
#define LULZBOT_X_MAX_POS (LULZBOT_STANDARD_X_MAX_POS + LULZBOT_TOOLHEAD_X_MAX_ADJ)
|
|
#define LULZBOT_X_MIN_POS (LULZBOT_STANDARD_X_MIN_POS + LULZBOT_TOOLHEAD_X_MIN_ADJ)
|
|
#define LULZBOT_Y_MAX_POS (LULZBOT_STANDARD_Y_MAX_POS + LULZBOT_TOOLHEAD_Y_MAX_ADJ)
|
|
#define LULZBOT_Y_MIN_POS (LULZBOT_STANDARD_Y_MIN_POS + LULZBOT_TOOLHEAD_Y_MIN_ADJ)
|
|
#define LULZBOT_Z_MAX_POS (LULZBOT_STANDARD_Z_MAX_POS + LULZBOT_TOOLHEAD_Z_MAX_ADJ)
|
|
#define LULZBOT_Z_MIN_POS (LULZBOT_STANDARD_Z_MIN_POS + LULZBOT_TOOLHEAD_Z_MIN_ADJ)
|
|
|
|
/**************************** ENDSTOP CONFIGURATION ****************************/
|
|
|
|
#if defined(LULZBOT_USE_MIN_ENDSTOPS)
|
|
#define LULZBOT_USE_XMIN_PLUG
|
|
#define LULZBOT_USE_YMIN_PLUG
|
|
#define LULZBOT_USE_ZMIN_PLUG
|
|
#endif
|
|
|
|
// Z-Max Endstops were introduced on the Mini and TAZ 6
|
|
#if defined(LULZBOT_USE_MAX_ENDSTOPS)
|
|
#define LULZBOT_USE_XMAX_PLUG
|
|
#define LULZBOT_USE_YMAX_PLUG
|
|
#define LULZBOT_USE_ZMAX_PLUG
|
|
#endif
|
|
|
|
#define LULZBOT_ENDSTOPS_ALWAYS_ON_DEFAULT
|
|
#define LULZBOT_ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
|
|
|
// Workaround for bug in Marlin 1.1.5 where motion is stopped a X or Y = 0,
|
|
// On the Hibiscus, enable software endstops
|
|
#if defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_MIN_SOFTWARE_ENDSTOPS
|
|
#endif
|
|
|
|
// The RAMBO does not support interrupts on all pins
|
|
// so leave the ENDSTOP_INTERRUPTS_FEATURE disabled
|
|
|
|
//#define LULZBOT_ENDSTOP_INTERRUPTS_FEATURE
|
|
|
|
/* Endstop settings are determined by printer model, except for the
|
|
* X_MAX which varies by toolhead. */
|
|
|
|
#if defined(LULZBOT_USE_NORMALLY_CLOSED_ENDSTOPS)
|
|
// TAZ 6+ and Hibiscus Mini onwards use normally closed endstops.
|
|
// This is safer, as a loose connector or broken wire will halt
|
|
// the axis
|
|
#define LULZBOT_X_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP
|
|
#define LULZBOT_Y_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP
|
|
|
|
|
|
// LULZBOT_X_MAX_ENDSTOP_INVERTING varies by toolhead
|
|
#define LULZBOT_Y_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP
|
|
#define LULZBOT_Z_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP
|
|
|
|
#elif defined(LULZBOT_USE_NORMALLY_OPEN_ENDSTOPS)
|
|
#define LULZBOT_X_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_Y_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
|
|
// LULZBOT_X_MAX_ENDSTOP_INVERTING varies by toolhead
|
|
#define LULZBOT_Y_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_Z_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#endif
|
|
|
|
// Electrical probing pins are always open until contact is made
|
|
#define LULZBOT_Z_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_Z_MIN_PROBE_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
|
|
/********************************* STATUS LIGHTS ********************************/
|
|
|
|
#if defined(LULZBOT_USE_STATUS_LED)
|
|
#define LULZBOT_NEOPIXEL_RGBW_LED
|
|
#define LULZBOT_NEOPIXEL_PIN BOARD_X_MAX_PIN
|
|
#define LULZBOT_NEOPIXEL_PIXELS 8
|
|
#undef LULZBOT_USE_XMAX_PLUG
|
|
#endif
|
|
|
|
/******************************* SENSORLESS HOMING ******************************/
|
|
|
|
#if defined(LULZBOT_SENSORLESS_HOMING)
|
|
#define LULZBOT_X_HOMING_SENSITIVITY 4
|
|
#define LULZBOT_Y_HOMING_SENSITIVITY 4
|
|
#define LULZBOT_Z_HOMING_SENSITIVITY 4
|
|
#endif
|
|
|
|
#if defined(LULZBOT_SENSORLESS_HOMING_Z)
|
|
/* With sensorless Z homing, we position the head over a corner washer,
|
|
lower the Z current and push the head down until we detect a stall
|
|
(or electrical contact is made, if LULZBOT_HOMING_USES_PROBE_PINS).
|
|
|
|
Sensorless Z homing is not accurate enough for bed leveling, but it
|
|
is good enough to allow us to find the wiper pad and proceed to
|
|
probe electrically (as was done on previous generation machines).
|
|
*/
|
|
#define LULZBOT_Z_SAFE_HOMING
|
|
#define LULZBOT_Z_SAFE_HOMING_X_POINT 17 // LULZBOT_LEFT_PROBE_BED_POSITION
|
|
#define LULZBOT_Z_SAFE_HOMING_Y_POINT 180 // LULZBOT_BACK_PROBE_BED_POSITION
|
|
|
|
#define LULZBOT_Z_HOMING_SENSITIVITY 2
|
|
#define LULZBOT_Z_HOMING_CURRENT 500
|
|
|
|
#define LULZBOT_Z_HOMING_HEIGHT 5
|
|
|
|
//#define LULZBOT_HOMING_FEEDRATE_Z (3*60) // mm/m
|
|
|
|
/* Lower the current on Z, otherwise the gearing on the axis prevents
|
|
us from detecting a stall. */
|
|
#define LULZBOT_ADJUST_Z_HOMING_CURRENT(enable) \
|
|
{ \
|
|
if(enable) { \
|
|
stepperZ.setCurrent(LULZBOT_Z_HOMING_CURRENT, R_SENSE, HOLD_MULTIPLIER); \
|
|
stepperZ.sg_stall_value(LULZBOT_Z_HOMING_SENSITIVITY); \
|
|
stepperZ.diag1_stall(1); \
|
|
} else { \
|
|
stepperZ.setCurrent(LULZBOT_MOTOR_CURRENT_Z, R_SENSE, HOLD_MULTIPLIER); \
|
|
stepperZ.diag1_stall(0); \
|
|
} \
|
|
}
|
|
|
|
/* When this is enabled, the probe pin will also be used, in addition to stallguard,
|
|
to detect the X_MIN. Will generally keep the bed from flexing as far. */
|
|
//#define LULZBOT_HOMING_USES_PROBE_PINS
|
|
|
|
#define LULZBOT_SENSORLESS_HOMING_Z_INIT \
|
|
LULZBOT_ENABLE_COOLSTEP_WITH_STALLGUARD(stepperZ); \
|
|
/* Set stallguard value for Z sensing */ \
|
|
stepperZ.sg_stall_value(LULZBOT_Z_HOMING_SENSITIVITY); \
|
|
stepperZ.diag1_stall(0); /* Start disabled */
|
|
#else
|
|
#define LULZBOT_SENSORLESS_HOMING_Z_INIT
|
|
#define LULZBOT_ADJUST_Z_HOMING_CURRENT(enable)
|
|
#endif
|
|
|
|
#if defined(LULZBOT_SENSORLESS_HOMING)
|
|
#define LULZBOT_X_HOME_BUMP_MM 0
|
|
#define LULZBOT_Y_HOME_BUMP_MM 0
|
|
#else
|
|
#define LULZBOT_X_HOME_BUMP_MM 5
|
|
#define LULZBOT_Y_HOME_BUMP_MM 5
|
|
#endif
|
|
|
|
#if defined(LULZBOT_SENSORLESS_HOMING_Z)
|
|
#define LULZBOT_Z_HOME_BUMP_MM 0
|
|
#else
|
|
#define LULZBOT_Z_HOME_BUMP_MM 2
|
|
#endif
|
|
|
|
#if defined(LULZBOT_USE_EINSYRAMBO)
|
|
#define LULZBOT_HAVE_TMC2130
|
|
|
|
#if defined(LULZBOT_USE_EINSY_RETRO)
|
|
#define LULZBOT_R_SENSE 0.12
|
|
#else
|
|
#define LULZBOT_R_SENSE 0.1
|
|
#endif
|
|
|
|
#define LULZBOT_HOLD_MULTIPLIER 0.5
|
|
|
|
// If true, use STEALTHCHOP, otherwise use COOLSTEP
|
|
#if defined(LULZBOT_USE_TMC_STEALTHCHOP_XY) || defined(LULZBOT_USE_TMC_STEALTHCHOP_Z)
|
|
#define LULZBOT_STEALTHCHOP LULZBOT_USE_TMC_STEALTHCHOP
|
|
#define LULZBOT_HYBRID_THRESHOLD
|
|
#endif
|
|
|
|
#define LULZBOT_Y_HYBRID_THRESHOLD 72
|
|
#define LULZBOT_X_HYBRID_THRESHOLD 72
|
|
|
|
#define LULZBOT_TMC_INIT(st) \
|
|
/* The EinsyRambo connects both diag pins to the same */ \
|
|
/* microcontroller pin and provides a pull up resistor, */ \
|
|
/* so configure the pin as active low. */ \
|
|
st.diag0_active_high(0); \
|
|
st.diag1_active_high(0); \
|
|
st.diag1_stall(1); \
|
|
/* Reverse the motor direction so it matches the Rambo */ \
|
|
st.shaft_dir(1); \
|
|
st.external_ref(0); /* I_scale_analog = 0 */ \
|
|
st.internal_sense_R(0); /* internal_Rsense = 0 */ \
|
|
|
|
#define LULZBOT_SIGN_EXTEND_SGT(sgt) int8_t(sgt | ((sgt << 1) & 0x80))
|
|
|
|
#define TMC_CS_TO_mA(cs,vsense) (float(cs)+1)/32 * (vsense?0.180:0.325)/(LULZBOT_R_SENSE+0.02) * 1/sqrt(2) * 1000
|
|
|
|
#define LULZBOT_ENABLE_COOLSTEP_WITH_STALLGUARD(st) \
|
|
/* Disable steathchop */ \
|
|
st.stealthChop(0); \
|
|
/* Enable coolstep for all velocities */ \
|
|
st.coolstep_min_speed(1024UL * 1024UL - 1UL); \
|
|
st.sg_min(1); \
|
|
st.sg_max(3);
|
|
|
|
#define LULZBOT_ENABLE_STEALTHCHOP(st) \
|
|
/* Enable steathchop */ \
|
|
st.stealthChop(1); \
|
|
/* Disable coolstep */ \
|
|
st.coolstep_min_speed(0); \
|
|
st.sg_min(0); \
|
|
st.sg_max(0);
|
|
|
|
/* X axis driver temperature tuning notes over a 10 minute print:
|
|
* - TOFF caused the greatest effect on driver temperature (~40C) and needs
|
|
* to be at 1 to keep the drivers from overheating (was tested at 1-3)
|
|
* - TBL can be either 0, 1 or 2, but 3 will cause overheating and 1 appears
|
|
* to run the coolest.
|
|
* - Setting HSTRT higher than 5 cause the drivers to warm up.
|
|
* - Setting HSTRT lower than 3 causes the motor to stall.
|
|
* - Setting HEND higher than 1 causes drivers to overheat.
|
|
*/
|
|
|
|
#define LULZBOT_XY_TOFF 1
|
|
#define LULZBOT_XY_HSTRT 4
|
|
#define LULZBOT_XY_HEND 0
|
|
#define LULZBOT_XY_TBL 1
|
|
|
|
#define LULZBOT_MOTOR_INIT_XY \
|
|
stepperX.tbl(LULZBOT_XY_TBL); /* TBL = [0..3] */ \
|
|
stepperY.tbl(LULZBOT_XY_TBL); /* TBL = [0..3] */ \
|
|
stepperX.toff(LULZBOT_XY_TOFF); /* TOFF = [1..15] */ \
|
|
stepperY.toff(LULZBOT_XY_TOFF); /* TOFF = [1..15] */ \
|
|
stepperX.hstrt(LULZBOT_XY_HSTRT); /* HSTART = [0..7] */ \
|
|
stepperY.hstrt(LULZBOT_XY_HSTRT); /* HSTART = [0..7] */ \
|
|
stepperX.hend(LULZBOT_XY_HEND); /* HEND = [0..15] */ \
|
|
stepperY.hend(LULZBOT_XY_HEND); /* HEND = [0..15] */
|
|
|
|
/* Once homing is finished, return to the normal operating mode: */
|
|
/* Either stealthchop or coolstep, as previously configured */
|
|
#if defined(LULZBOT_USE_TMC_STEALTHCHOP_Z)
|
|
#define LULZBOT_DEFAULT_OPERATING_MODE_Z(st) LULZBOT_ENABLE_STEALTHCHOP(st)
|
|
#else
|
|
#define LULZBOT_DEFAULT_OPERATING_MODE_Z(st) LULZBOT_ENABLE_COOLSTEP_WITH_STALLGUARD(st)
|
|
#endif
|
|
|
|
#define LULZBOT_Z_TOFF 1
|
|
#define LULZBOT_Z_HSTRT 0
|
|
#define LULZBOT_Z_HEND 0
|
|
#define LULZBOT_Z_TBL 1
|
|
|
|
#define LULZBOT_MOTOR_INIT_Z \
|
|
/* Set TOFF to reduce audible chopping noise */ \
|
|
stepperZ.toff(LULZBOT_Z_TOFF); /* TOFF = [1..15] */ \
|
|
stepperZ.hstrt(LULZBOT_Z_HSTRT); /* HSTART = [0..7] */ \
|
|
stepperZ.hend(LULZBOT_Z_HEND); /* HEND = [0..15] */ \
|
|
stepperZ.tbl(LULZBOT_Z_TBL); /* TBL = [0..3] */ \
|
|
/* Set Z homing sensitivity, but not yet homing */ \
|
|
stepperZ.sg_stall_value(LULZBOT_Z_HOMING_SENSITIVITY); \
|
|
LULZBOT_DEFAULT_OPERATING_MODE_Z(stepperZ);
|
|
|
|
#define LULZBOT_E_TOFF 1
|
|
#define LULZBOT_E_HSTRT 0
|
|
#define LULZBOT_E_HEND 0
|
|
#define LULZBOT_E_TBL 1
|
|
|
|
#define LULZBOT_MOTOR_INIT_E \
|
|
/* Set TOFF to reduce audible chopping noise */ \
|
|
stepperZ.toff(LULZBOT_E_TOFF); /* TOFF = [1..15] */ \
|
|
stepperZ.hstrt(LULZBOT_E_HSTRT); /* HSTART = [0..7] */ \
|
|
stepperZ.hend(LULZBOT_E_HEND); /* HEND = [0..15] */ \
|
|
stepperZ.tbl(LULZBOT_E_TBL); /* TBL = [0..3] */ \
|
|
/* Always use COOLSTEP on E0 */ \
|
|
LULZBOT_ENABLE_COOLSTEP_WITH_STALLGUARD(stepperE0); \
|
|
|
|
#define LULZBOT_TMC_ADV { \
|
|
LULZBOT_MOTOR_INIT_XY \
|
|
LULZBOT_MOTOR_INIT_Z \
|
|
LULZBOT_MOTOR_INIT_E \
|
|
LULZBOT_SENSORLESS_HOMING_Z_INIT \
|
|
}
|
|
|
|
/* Once homing is finished, return to the normal operating mode: */
|
|
/* Either stealthchop or coolstep, as previously configured */
|
|
#if defined(LULZBOT_USE_TMC_STEALTHCHOP_XY)
|
|
#define LULZBOT_DEFAULT_OPERATING_MODE_XY(st) LULZBOT_ENABLE_STEALTHCHOP(st)
|
|
#else
|
|
#define LULZBOT_DEFAULT_OPERATING_MODE_XY(st) LULZBOT_ENABLE_COOLSTEP_WITH_STALLGUARD(st)
|
|
#endif
|
|
|
|
/* Sensorless homing requires stallguard, which is not available with
|
|
* stealhchop, so switch to COOLSTEP prior to doing a homing move. */
|
|
#define LULZBOT_SENSORLESS_HOMING_TOGGLE(st, enable) \
|
|
if (enable) { \
|
|
/* Sometimes the X axis refuses to move at the start of G28, */ \
|
|
/* because the stallguard is triggered. Toggling in and out */ \
|
|
/* of STEALHCHOP mode seems to resolve this. */ \
|
|
LULZBOT_ENABLE_STEALTHCHOP(st) \
|
|
LULZBOT_ENABLE_COOLSTEP_WITH_STALLGUARD(st) \
|
|
} else { \
|
|
LULZBOT_DEFAULT_OPERATING_MODE_XY(st) \
|
|
}
|
|
|
|
/* Leaving the toolhead resting on the endstops will likely cause
|
|
* chatter if the machine is immediately re-homed, so don't leave
|
|
* the head sitting on the endstops after homing. */
|
|
#define LULZBOT_BACKOFF_DIST_XY 5
|
|
#define LULZBOT_BACKOFF_DIST_Z 2
|
|
#define LULZBOT_BACKOFF_FEEDRATE 5
|
|
|
|
#define LULZBOT_AFTER_Z_HOME_ACTION \
|
|
{ \
|
|
int x = (LULZBOT_INVERT_X_HOME_DIR < 0 ? LULZBOT_BACKOFF_DIST_XY : LULZBOT_STANDARD_X_MAX_POS - LULZBOT_BACKOFF_DIST_XY); \
|
|
int y = (LULZBOT_INVERT_Y_HOME_DIR < 0 ? LULZBOT_BACKOFF_DIST_XY : LULZBOT_STANDARD_Y_MAX_POS - LULZBOT_BACKOFF_DIST_XY); \
|
|
int z = (LULZBOT_INVERT_Z_HOME_DIR < 0 ? LULZBOT_BACKOFF_DIST_Z : LULZBOT_STANDARD_Z_MAX_POS - LULZBOT_BACKOFF_DIST_Z); \
|
|
do_blocking_move_to_z( \
|
|
(home_all || homeZ) ? z : current_position[Z_AXIS] \
|
|
); \
|
|
do_blocking_move_to_xy( \
|
|
(home_all || homeX) ? x : current_position[X_AXIS], \
|
|
(home_all || homeY) ? y : current_position[Y_AXIS], \
|
|
LULZBOT_BACKOFF_FEEDRATE \
|
|
); \
|
|
}
|
|
#endif
|
|
|
|
#if defined(LULZBOT_SENSORLESS_HOMING)
|
|
#define LULZBOT_USE_XMIN_PLUG // Uses Stallguard
|
|
//#define LULZBOT_USE_XMAX_PLUG // Uses Stallguard
|
|
//#define LULZBOT_USE_YMIN_PLUG // Uses Stallguard
|
|
#define LULZBOT_USE_YMAX_PLUG // Uses Stallguard
|
|
#define LULZBOT_USE_ZMIN_PLUG
|
|
#define LULZBOT_USE_ZMAX_PLUG
|
|
|
|
#define LULZBOT_X_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
//#define LULZBOT_X_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
#define LULZBOT_Y_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
//#define LULZBOT_Y_MIN_ENDSTOP_INVERTING LULZBOT_NORMALLY_OPEN_ENDSTOP
|
|
|
|
#define LULZBOT_Z_MAX_ENDSTOP_INVERTING LULZBOT_NORMALLY_CLOSED_ENDSTOP
|
|
|
|
// The following does not seem to work when both
|
|
// MAX and MIN are using Stallguard.
|
|
// It also appears that when this is enabled
|
|
// stallguard is never cleared.
|
|
//#define LULZBOT_ENDSTOP_INTERRUPTS_FEATURE
|
|
|
|
// ENDSTOPS_ALWAYS_ON_DEFAULT causes false positives
|
|
// with stallguard.
|
|
#undef LULZBOT_ENDSTOPS_ALWAYS_ON_DEFAULT
|
|
|
|
// According to Jason at UltiMachine, setting the lower the
|
|
// stealth freq the cooler the motor drivers will operate.
|
|
#define LULZBOT_STEALTH_FREQ 0
|
|
|
|
// Quickhome does not work with sensorless homing
|
|
#undef LULZBOT_QUICKHOME
|
|
#endif
|
|
|
|
/**************************** ADVANCED PAUSE FEATURE ****************************/
|
|
|
|
#if defined(LULZBOT_USE_LCD_DISPLAY)
|
|
#define LULZBOT_ADVANCED_PAUSE_FEATURE
|
|
#define LULZBOT_HOME_BEFORE_FILAMENT_CHANGE
|
|
#define LULZBOT_PARK_HEAD_ON_PAUSE
|
|
#define LULZBOT_PAUSE_PARK_X_POS 10
|
|
#define LULZBOT_PAUSE_PARK_Y_POS LULZBOT_Y_MAX_POS - 10
|
|
#endif
|
|
|
|
/*********************************** WIPER PAD **********************************/
|
|
|
|
// Nozzle wiping points (varies by toolhead, as the nozzle position varies)
|
|
#if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_BELT)
|
|
// Mini has a horizontal wiping pad on the back of the bed
|
|
#define LULZBOT_STANDARD_WIPE_X1 42
|
|
#define LULZBOT_STANDARD_WIPE_X2 112
|
|
#define LULZBOT_STANDARD_WIPE_Y1 170
|
|
#define LULZBOT_STANDARD_WIPE_Y2 170
|
|
#define LULZBOT_STANDARD_WIPE_Z 1
|
|
|
|
#elif defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_SCREW)
|
|
// Mini has a horizontal wiping pad on the back of the bed
|
|
#define LULZBOT_STANDARD_WIPE_X1 45
|
|
#define LULZBOT_STANDARD_WIPE_X2 115
|
|
#define LULZBOT_STANDARD_WIPE_Y1 172
|
|
#define LULZBOT_STANDARD_WIPE_Y2 172
|
|
#define LULZBOT_STANDARD_WIPE_Z -0.5
|
|
|
|
#elif defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_TAZ_BED)
|
|
// TAZ has a vertical wiping pad on the left side of the bed
|
|
#define LULZBOT_STANDARD_WIPE_X1 -16
|
|
#define LULZBOT_STANDARD_WIPE_X2 -16
|
|
#define LULZBOT_STANDARD_WIPE_Y1 95
|
|
#define LULZBOT_STANDARD_WIPE_Y2 25
|
|
#define LULZBOT_STANDARD_WIPE_Z 1
|
|
#endif
|
|
|
|
#define LULZBOT_NOZZLE_CLEAN_START_POINT { \
|
|
LULZBOT_STANDARD_WIPE_X1 + LULZBOT_TOOLHEAD_WIPE_X1_ADJ, \
|
|
LULZBOT_STANDARD_WIPE_Y1 + LULZBOT_TOOLHEAD_WIPE_Y1_ADJ, \
|
|
LULZBOT_STANDARD_WIPE_Z \
|
|
}
|
|
|
|
#define LULZBOT_NOZZLE_CLEAN_END_POINT { \
|
|
LULZBOT_STANDARD_WIPE_X2 + LULZBOT_TOOLHEAD_WIPE_X2_ADJ, \
|
|
LULZBOT_STANDARD_WIPE_Y2 + LULZBOT_TOOLHEAD_WIPE_Y2_ADJ, \
|
|
LULZBOT_STANDARD_WIPE_Z \
|
|
}
|
|
|
|
/*************************** REWIPE FUNCTIONALITY *******************************/
|
|
|
|
#define LULZBOT_NUM_REWIPES 3
|
|
#if defined(LULZBOT_IS_TAZ)
|
|
#define LULZBOT_BED_PROBE_MIN 0 // Limit on pushing into the bed
|
|
#else defined(LULZBOT_IS_MINI)
|
|
#define LULZBOT_BED_PROBE_MIN -4 // Limit on pushing into the bed
|
|
#endif
|
|
|
|
#if defined(LULZBOT_USE_PRE_GLADIOLA_G29_WORKAROUND)
|
|
// workaround for older minis where G29 shifts the coordinate system
|
|
#define LULZBOT_REHOME_BEFORE_REWIPE \
|
|
do_blocking_move_to_xy(X_MIN_POS + 5, Y_MAX_POS - 5); /* Approach home */ \
|
|
do_blocking_move_to_xy(X_MIN_POS + 5, Y_MAX_POS); /* Trigger Y_MAX */ \
|
|
do_blocking_move_to_xy(X_MIN_POS + 5, Y_MAX_POS - 5); /* Clear endstops */ \
|
|
do_blocking_move_to_xy(X_MIN_POS, Y_MAX_POS - 5); /* Trigger X_MIN */ \
|
|
do_blocking_move_to_xy(X_MIN_POS + 5, Y_MAX_POS - 5); /* Clear endstops */
|
|
#else
|
|
#define LULZBOT_REHOME_BEFORE_REWIPE
|
|
#endif
|
|
|
|
#define LULZBOT_PROBE_Z_WITH_REWIPE(speed) \
|
|
/* do_probe_move returns true when it fails to hit an endstop, meaning we need to rewipe */ \
|
|
for(int rewipes = 0; do_probe_move(LULZBOT_BED_PROBE_MIN, speed); rewipes++) { \
|
|
if(rewipes >= LULZBOT_NUM_REWIPES) { /* max of tries */ \
|
|
SERIAL_ERRORLNPGM("PROBE FAIL CLEAN NOZZLE"); /* cura listens for this message specifically */ \
|
|
LCD_MESSAGEPGM(MSG_ERR_PROBING_FAILED); /* use a more friendly message on the LCD */ \
|
|
BUZZ(25, 880); BUZZ(50, 0); /* play tone */ \
|
|
BUZZ(25, 880); BUZZ(50, 0); \
|
|
BUZZ(25, 880); BUZZ(50, 0); \
|
|
do_blocking_move_to_z(100, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); /* raise head */ \
|
|
current_position[E_AXIS] = 0; /* prime nozzle at 75 mm/sec */ \
|
|
planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 75./60, active_extruder); \
|
|
sync_plan_position_e(); \
|
|
stepper.synchronize(); \
|
|
kill(PSTR(MSG_ERR_PROBING_FAILED)); /* stop print job */ \
|
|
return NAN; /* abort the leveling in progress */ \
|
|
} \
|
|
SERIAL_ERRORLNPGM(MSG_REWIPE); \
|
|
LCD_MESSAGEPGM(MSG_REWIPE); \
|
|
do_blocking_move_to_z(10, MMM_TO_MMS(speed)); /* raise nozzle */ \
|
|
Nozzle::clean(0, 12, 0, 0); /* wipe nozzle */ \
|
|
}
|
|
|
|
/******************************** MOTOR CURRENTS *******************************/
|
|
|
|
// Values for XYZ vary by printer model, values for E vary by toolhead.
|
|
|
|
#if defined(LULZBOT_USE_EINSYRAMBO)
|
|
// These values specify the maximum current, but actual
|
|
// currents may be lower when used with COOLCONF
|
|
#if defined(LULZBOT_USE_TMC_STEALTHCHOP_XY)
|
|
// Stealth mode seems to cause the drivers to overheat
|
|
// at considerably less current.
|
|
#define LULZBOT_MOTOR_CURRENT_XY 900 // mA
|
|
#else
|
|
#define LULZBOT_MOTOR_CURRENT_XY 920 // mA
|
|
#endif
|
|
#define LULZBOT_MOTOR_CURRENT_Z 960 // mA
|
|
|
|
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_SCREW)
|
|
#define LULZBOT_MOTOR_CURRENT_XY 1300 // mA
|
|
#define LULZBOT_MOTOR_CURRENT_Z 1630 // mA
|
|
|
|
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_MOTOR_CURRENT_XY 1300 // mA
|
|
#define LULZBOT_MOTOR_CURRENT_Z 1630 // mA
|
|
|
|
#elif defined(LULZBOT_Juniper_TAZ5)
|
|
#define LULZBOT_MOTOR_CURRENT_XY 950 // mA
|
|
#define LULZBOT_MOTOR_CURRENT_Z 1275 // mA
|
|
|
|
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_Z_SCREW)
|
|
#define LULZBOT_MOTOR_CURRENT_XY 950 // mA
|
|
#define LULZBOT_MOTOR_CURRENT_Z 1075 // mA
|
|
|
|
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_Z_BELT)
|
|
#define LULZBOT_MOTOR_CURRENT_XY 950 // mA
|
|
#define LULZBOT_MOTOR_CURRENT_Z 950 // mA
|
|
#endif
|
|
|
|
/************ ACCELERATION, FEEDRATES AND XYZ MOTOR STEPS *******************/
|
|
|
|
// Values for XYZ vary by printer model, values for E vary by toolhead.
|
|
|
|
#if defined(LULZBOT_USE_Z_SCREW)
|
|
// Older printers had a fudge factor for ABS shrinkage.
|
|
#define LULZBOT_XY_STEPS 100.5
|
|
#else
|
|
// In the Mini 2 and TAZ 7 going forward, use true XY steps.
|
|
#define LULZBOT_XY_STEPS 100
|
|
#endif
|
|
|
|
#if defined(LULZBOT_IS_MINI)
|
|
|
|
#if defined(LULZBOT_USE_TMC_STEALTHCHOP)
|
|
#define LULZBOT_DEFAULT_ACCELERATION 500
|
|
#define LULZBOT_DEFAULT_TRAVEL_ACCELERATION 500
|
|
#else
|
|
#define LULZBOT_DEFAULT_ACCELERATION 2000
|
|
#define LULZBOT_DEFAULT_TRAVEL_ACCELERATION 2000
|
|
#endif
|
|
|
|
#define LULZBOT_DEFAULT_XJERK 12.0
|
|
#define LULZBOT_DEFAULT_YJERK 12.0
|
|
#define LULZBOT_DEFAULT_ZJERK 0.4
|
|
|
|
#define LULZBOT_Z_PROBE_OFFSET_FROM_EXTRUDER -1.377
|
|
|
|
#elif defined(LULZBOT_IS_TAZ)
|
|
#define LULZBOT_DEFAULT_XJERK 8.0
|
|
#define LULZBOT_DEFAULT_YJERK 8.0
|
|
#define LULZBOT_DEFAULT_ZJERK 0.4
|
|
#if not defined(LULZBOT_DEFAULT_ACCELERATION)
|
|
#define LULZBOT_DEFAULT_ACCELERATION 500
|
|
#endif
|
|
#if not defined(LULZBOT_DEFAULT_TRAVEL_ACCELERATION)
|
|
#define LULZBOT_DEFAULT_TRAVEL_ACCELERATION 500
|
|
#endif
|
|
|
|
#define LULZBOT_Z_PROBE_OFFSET_FROM_EXTRUDER -1.200
|
|
#endif
|
|
|
|
#if defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_SCREW)
|
|
#define LULZBOT_Z_STEPS 1600
|
|
#define LULZBOT_Z_MICROSTEPS 16
|
|
|
|
#define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 8, 40} // (mm/sec)
|
|
#define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,100,1000}
|
|
|
|
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT)
|
|
#if defined(LULZBOT_USE_32_MICROSTEPS_ON_Z)
|
|
#define LULZBOT_Z_STEPS 200
|
|
#define LULZBOT_Z_MICROSTEPS 32
|
|
#else
|
|
#define LULZBOT_Z_STEPS 100
|
|
#define LULZBOT_Z_MICROSTEPS 16
|
|
#endif
|
|
#define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 300, 40} // (mm/sec)
|
|
|
|
#if defined(LULZBOT_USE_TMC_STEALTHCHOP_XY)
|
|
/* Stealthchop can skip steps if the acceleration is too high */
|
|
#define LULZBOT_DEFAULT_MAX_ACCELERATION {3000,3000,200,1000}
|
|
#else
|
|
#define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,200,1000}
|
|
#endif
|
|
|
|
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_Z_SCREW)
|
|
#define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 3, 25} // (mm/sec)
|
|
#define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,100,10000}
|
|
#define LULZBOT_Z_STEPS 1600
|
|
#define LULZBOT_Z_MICROSTEPS 16
|
|
|
|
#elif defined(LULZBOT_IS_TAZ) && defined(LULZBOT_USE_Z_BELT)
|
|
// Prototype Z-belt driven TAZ 7
|
|
#define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 10, 25} // (mm/sec)
|
|
#define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,10,10000}
|
|
#define LULZBOT_Z_STEPS 1790.08264463
|
|
#define LULZBOT_Z_MICROSTEPS 16
|
|
#endif
|
|
|
|
#if defined(LULZBOT_USE_EINSYRAMBO)
|
|
// Neither define LULZBOT_PWM_MOTOR_CURRENT nor LULZBOT_DIGIPOT_MOTOR_CURRENT,
|
|
// as the current is set in Configuration_adv.h under the HAVE_TMC2130 block
|
|
|
|
#define LULZBOT_X_CURRENT LULZBOT_MOTOR_CURRENT_XY
|
|
#define LULZBOT_Y_CURRENT LULZBOT_MOTOR_CURRENT_XY
|
|
#define LULZBOT_Z_CURRENT LULZBOT_MOTOR_CURRENT_Z
|
|
#define LULZBOT_E0_CURRENT LULZBOT_MOTOR_CURRENT_E
|
|
|
|
#elif defined(LULZBOT_IS_MINI)
|
|
#define LULZBOT_PWM_MOTOR_CURRENT { \
|
|
LULZBOT_MOTOR_CURRENT_XY, \
|
|
LULZBOT_MOTOR_CURRENT_Z, \
|
|
LULZBOT_MOTOR_CURRENT_E \
|
|
} // Values in milliamps
|
|
|
|
#elif defined(LULZBOT_IS_TAZ)
|
|
// Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
|
#define DIGIPOT_CURRENT(mA) ((mA-750)/5+135)
|
|
|
|
#if LULZBOT_EXTRUDERS == 2
|
|
#define LULZBOT_DIGIPOT_MOTOR_CURRENT { \
|
|
DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_XY), \
|
|
DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_XY), \
|
|
DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_Z), \
|
|
DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_E0), \
|
|
DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_E1) \
|
|
} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
|
#else
|
|
#define LULZBOT_DIGIPOT_MOTOR_CURRENT { \
|
|
DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_XY), \
|
|
DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_XY), \
|
|
DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_Z), \
|
|
DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_E), \
|
|
DIGIPOT_CURRENT(LULZBOT_MOTOR_CURRENT_E) \
|
|
} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
|
#endif
|
|
#else
|
|
#error Motor currents not defined
|
|
#endif
|
|
|
|
#if defined(LULZBOT_DISTINCT_E_FACTORS) && LULZBOT_EXTRUDERS == 2 && !defined(LULZBOT_SWITCHING_EXTRUDER)
|
|
#define LULZBOT_DEFAULT_AXIS_STEPS_PER_UNIT {LULZBOT_XY_STEPS,LULZBOT_XY_STEPS,LULZBOT_Z_STEPS,LULZBOT_E_STEPS,LULZBOT_E_STEPS}
|
|
#else
|
|
#define LULZBOT_DEFAULT_AXIS_STEPS_PER_UNIT {LULZBOT_XY_STEPS,LULZBOT_XY_STEPS,LULZBOT_Z_STEPS,LULZBOT_E_STEPS}
|
|
#endif
|
|
|
|
/*********************************** LCD OPTIONS *******************************/
|
|
|
|
#if defined(LULZBOT_USE_LCD_DISPLAY)
|
|
#define LULZBOT_REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
|
#define LULZBOT_SDSUPPORT
|
|
#define LULZBOT_XYZ_HOLLOW_FRAME_DISABLE
|
|
#define LULZBOT_MENU_HOLLOW_FRAME_DISABLE
|
|
#define LULZBOT_USE_SMALL_INFOFONT
|
|
#if defined(LULZBOT_USE_AUTOLEVELING)
|
|
#define LULZBOT_BABYSTEPPING
|
|
#define LULZBOT_BABYSTEP_ZPROBE_OFFSET
|
|
#define LULZBOT_MENU_BED_LEVELING_GCODE "G28 XY\nM109 S175\nG28 Z\nM109 R145\nG12\nG29\nM104 S0"
|
|
#endif
|
|
#define LULZBOT_SHOW_CUSTOM_BOOTSCREEN
|
|
#define LULZBOT_ENCODER_PULSES_PER_STEP 2
|
|
#define LULZBOT_ENCODER_STEPS_PER_MENU_ITEM 1
|
|
#define LULZBOT_COOLING_MESSAGES
|
|
#if defined(LULZBOT_IS_MINI)
|
|
// In the experimental Gladiola_MiniLCD, the encoder direction is reversed.
|
|
#define LULZBOT_REVERSE_ENCODER_DIRECTION
|
|
#endif
|
|
/* Marlin shows three extruders on a dual:
|
|
* Extruder - The active nozzle (varies)
|
|
* Extruder 1 - The primary extruder
|
|
* Extruder 2 - The secondary extruder
|
|
*
|
|
* The following causes the active nozzle to be
|
|
* hidden as seeing three nozzles may be
|
|
* confusing to users.
|
|
*/
|
|
#define LULZBOT_HIDE_ACTIVE_NOZZLE_IN_LCD
|
|
#define LULZBOT_HIDE_PID_CONFIG_IN_LCD
|
|
#define LULZBOT_HIDE_EXTRA_FAN_CONFIG_IN_LCD
|
|
#define LULZBOT_REORDERED_MENUS
|
|
#define LULZBOT_ESTEP_REDUCED_LCD_PRECISION
|
|
#if LULZBOT_EXTRUDERS > 1
|
|
#define LULZBOT_CHANGE_FILAMENT_DUAL_EXTRUDER_SUPPORT
|
|
#endif
|
|
#define LULZBOT_LCD_SET_PROGRESS_MANUALLY
|
|
#define LULZBOT_SCROLL_LONG_FILENAMES
|
|
#define LULZBOT_BABYSTEP_ZPROBE_GFX_OVERLAY
|
|
#define LULZBOT_THIN_OVERLAY_ARROWS
|
|
#define LULZBOT_DISABLE_KILL_BUTTON
|
|
#endif
|
|
|
|
/* Marlin requires static PSTRs to display on the LCD display, because of this */
|
|
/* we have to use a preprocessor trick to append the heater name on temp errors */
|
|
/* such that an appropriate PSTR is selected depending on the value of e */
|
|
#define LULZBOT_STRINGIFY(msg) msg
|
|
#define LULZBOT_ENHANCED_TEMP_ERROR_MSG(msg, e) \
|
|
((e == -1) ? PSTR(LULZBOT_STRINGIFY(msg) " BED") : ((e == 0) ? PSTR(LULZBOT_STRINGIFY(msg) " E0") : PSTR(LULZBOT_STRINGIFY(msg) " E1")) )
|
|
|
|
#if defined(LULZBOT_MODERN_UI)
|
|
#define LULZBOT_ABOUT_TO_DRAW_SCREEN(a,b) \
|
|
lcd_in_status(a == b); \
|
|
if(a == b) { \
|
|
a(); \
|
|
lcd_clicked = false; \
|
|
NOLESS(max_display_update_time, millis() - ms); \
|
|
return; \
|
|
}
|
|
#if defined(LULZBOT_IS_MINI)
|
|
#define WELCOME_MSG _UxGT("Mini 2 ready.")
|
|
#else
|
|
#define WELCOME_MSG _UxGT("TAZ 7 ready.")
|
|
#endif
|
|
#define LULZBOT_DELAY_TO_SHOW_POSITION 20
|
|
#else
|
|
#define LULZBOT_ABOUT_TO_DRAW_SCREEN(a)
|
|
#endif
|
|
|
|
#if defined(LULZBOT_USE_TOUCH_UI)
|
|
extern void lcd_update();
|
|
extern void lcd_buttons_update();
|
|
//#define LCD_IS_FT800
|
|
#define LCD_IS_FT810
|
|
#if defined(LULZBOT_USE_HIGH_RES)
|
|
#define LCD_800x480
|
|
#else
|
|
#define LCD_480x272
|
|
#endif
|
|
#define LCD_PORTRAIT
|
|
#define LCD_UPSIDE_DOWN
|
|
#define UI_FRAMEWORK_DEBUG
|
|
#define LULZBOT_SDSUPPORT
|
|
#define LULZBOT_DISABLE_SD_DETECT_INVERTED
|
|
#endif
|
|
|
|
/***************************** CUSTOM SPLASH SCREEN *****************************/
|
|
|
|
#define LULZBOT_CUSTOM_BOOTSCREEN() \
|
|
u8g.firstPage(); \
|
|
do { \
|
|
u8g.drawBitmapP(0,0,CEILING(CUSTOM_BOOTSCREEN_BMPWIDTH, 8),CUSTOM_BOOTSCREEN_BMPHEIGHT,custom_start_bmp); \
|
|
u8g.setFont(u8g_font_6x13); \
|
|
u8g.drawStr(61,17,LULZBOT_LCD_MACHINE_NAME); \
|
|
u8g.setFont(u8g_font_04b_03); \
|
|
u8g.drawStr(62,28,LULZBOT_LCD_TOOLHEAD_NAME); \
|
|
u8g.setFont(u8g_font_5x8); \
|
|
u8g.drawStr(63,41,"LulzBot.com"); \
|
|
u8g.setFont(u8g_font_5x8); \
|
|
u8g.drawStr(62,62,"v"); \
|
|
u8g.drawStr(67,62,SHORT_BUILD_VERSION LULZBOT_FW_VERSION); \
|
|
} while( u8g.nextPage() );
|
|
|
|
/*************************** Z-OFFSET AUTO-SAVE ********************************/
|
|
|
|
/* Historically, the Lulzbot firmware would save the Z-Offset into the EEPROM
|
|
* each time it is changed. The latest Marlin made this more difficult since they
|
|
* added a CRC to the EEPROM. We work around this by bracketing the EEPROM_READ
|
|
* and EEPROM_WRITE routines such that the CRC ignores the Z-Offset value. That
|
|
* code also captures the eeprom_index so we can write only that value later.
|
|
*/
|
|
|
|
/* The following goes in "configuration_store.cpp", before and after
|
|
* "EEPROM_WRITE(zprobe_zoffset)" and "EEPROM_READ(zprobe_zoffset)"
|
|
*/
|
|
#if defined(LULZBOT_USE_AUTOLEVELING)
|
|
#define LULZBOT_EEPROM_BEFORE_ZOFFSET \
|
|
const uint16_t eeprom_saved_crc = working_crc; \
|
|
eeprom_zoffset_index = eeprom_index;
|
|
|
|
#define LULZBOT_EEPROM_AFTER_ZOFFSET \
|
|
working_crc = eeprom_saved_crc;
|
|
|
|
/* The following goes in "configuration_store.h" */
|
|
#define LULZBOT_SAVE_ZOFFSET_TO_EEPROM_DECL \
|
|
static int eeprom_zoffset_index; \
|
|
static void store_zoffset();
|
|
|
|
/* The following goes in "configuration_store.cpp" */
|
|
#define LULZBOT_SAVE_ZOFFSET_TO_EEPROM_IMPL \
|
|
int MarlinSettings::eeprom_zoffset_index = -1; \
|
|
void MarlinSettings::store_zoffset() { \
|
|
if(eeprom_zoffset_index > 0) { \
|
|
uint16_t working_crc; \
|
|
int eeprom_index = eeprom_zoffset_index; \
|
|
EEPROM_WRITE(zprobe_zoffset); \
|
|
SERIAL_ECHO_START(); \
|
|
SERIAL_ECHOPAIR("Updating zoffset in EEPROM: ", zprobe_zoffset); \
|
|
SERIAL_ECHOPAIR("; EEPROM Index: ", eeprom_zoffset_index); \
|
|
SERIAL_ECHOLNPGM(""); \
|
|
} \
|
|
}
|
|
|
|
/* The following goes in "ultralcd.cpp" in "lcd_babystep_zoffset" */
|
|
#define LULZBOT_SAVE_ZOFFSET_TO_EEPROM settings.store_zoffset();
|
|
#else
|
|
#define LULZBOT_EEPROM_BEFORE_ZOFFSET
|
|
#define LULZBOT_EEPROM_AFTER_ZOFFSET
|
|
#define LULZBOT_SAVE_ZOFFSET_TO_EEPROM_DECL
|
|
#define LULZBOT_SAVE_ZOFFSET_TO_EEPROM_IMPL
|
|
#define LULZBOT_SAVE_ZOFFSET_TO_EEPROM
|
|
#endif
|
|
|
|
#endif /* CONDITIONALS_LULZBOT */
|