You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
267 lines
16 KiB
267 lines
16 KiB
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* German
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
|
*
|
|
*/
|
|
#ifndef LANGUAGE_DE_H
|
|
#define LANGUAGE_DE_H
|
|
|
|
#define MAPPER_C2C3
|
|
#define DISPLAY_CHARSET_ISO10646_1
|
|
|
|
#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("ÄäÖöÜüß²³")
|
|
|
|
#define WELCOME_MSG MACHINE_NAME _UxGT(" bereit")
|
|
#define MSG_BACK _UxGT("Zurück")
|
|
#define MSG_SD_INSERTED _UxGT("SD-Karte erkannt")
|
|
#define MSG_SD_REMOVED _UxGT("SD-Karte entfernt")
|
|
#define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters
|
|
#define MSG_MAIN _UxGT("Hauptmenü")
|
|
#define MSG_AUTOSTART _UxGT("Autostart")
|
|
#define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84
|
|
#define MSG_AUTO_HOME _UxGT("Home") // G28
|
|
#define MSG_AUTO_HOME_X _UxGT("Home X")
|
|
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
|
|
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
|
|
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
|
|
#define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start")
|
|
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate")
|
|
#define MSG_LEVEL_BED_DONE _UxGT("Fertig")
|
|
#define MSG_LEVEL_BED_CANCEL _UxGT("Abbruch")
|
|
#define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz")
|
|
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv")
|
|
#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
|
|
#define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA")
|
|
#define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ")
|
|
#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alle")
|
|
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Extr.")
|
|
#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett")
|
|
#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.")
|
|
#define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS")
|
|
#define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ")
|
|
#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alle")
|
|
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Extr.")
|
|
#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett")
|
|
#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.")
|
|
#define MSG_COOLDOWN _UxGT("Abkühlen")
|
|
#define MSG_SWITCH_PS_ON _UxGT("Netzteil ein")
|
|
#define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus")
|
|
#define MSG_EXTRUDE _UxGT("Extrudieren")
|
|
#define MSG_RETRACT _UxGT("Retract")
|
|
#define MSG_MOVE_AXIS _UxGT("Bewegen")
|
|
#define MSG_LEVEL_BED _UxGT("Bett nivellieren")
|
|
#define MSG_MOVE_X _UxGT("X")
|
|
#define MSG_MOVE_Y _UxGT("Y")
|
|
#define MSG_MOVE_Z _UxGT("Z")
|
|
#define MSG_MOVE_E _UxGT("Extruder ")
|
|
#define MSG_MOVE_01MM _UxGT(" 0,1 mm")
|
|
#define MSG_MOVE_1MM _UxGT(" 1,0 mm")
|
|
#define MSG_MOVE_10MM _UxGT("10,0 mm")
|
|
#define MSG_SPEED _UxGT("Geschw.")
|
|
#define MSG_BED_Z _UxGT("Bett Z")
|
|
#define MSG_NOZZLE _UxGT("Düse")
|
|
#define MSG_BED _UxGT("Bett")
|
|
#define MSG_FAN_SPEED _UxGT("Lüfter")
|
|
#define MSG_FLOW _UxGT("Durchfluss")
|
|
#define MSG_CONTROL _UxGT("Einstellungen")
|
|
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min")
|
|
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max")
|
|
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor")
|
|
#define MSG_AUTOTEMP _UxGT("AutoTemp")
|
|
#define MSG_ON _UxGT("Ein")
|
|
#define MSG_OFF _UxGT("Aus")
|
|
#define MSG_PID_P _UxGT("PID P")
|
|
#define MSG_PID_I _UxGT("PID I")
|
|
#define MSG_PID_D _UxGT("PID D")
|
|
#define MSG_PID_C _UxGT("PID C")
|
|
#define MSG_SELECT _UxGT("Auswählen")
|
|
#define MSG_ACC _UxGT("A")
|
|
#define MSG_VX_JERK _UxGT("V X Jerk")
|
|
#define MSG_VY_JERK _UxGT("V Y Jerk")
|
|
#define MSG_VZ_JERK _UxGT("V Z Jerk")
|
|
#define MSG_VE_JERK _UxGT("V E Jerk")
|
|
#define MSG_VMAX _UxGT("V max ") // space by purpose
|
|
#define MSG_VMIN _UxGT("V min")
|
|
#define MSG_VTRAV_MIN _UxGT("V min Leerfahrt")
|
|
#define MSG_AMAX _UxGT("A max ") // space by purpose
|
|
#define MSG_A_RETRACT _UxGT("A Retract")
|
|
#define MSG_A_TRAVEL _UxGT("A Leerfahrt")
|
|
#define MSG_XSTEPS _UxGT("X Steps/mm")
|
|
#define MSG_YSTEPS _UxGT("Y Steps/mm")
|
|
#define MSG_ZSTEPS _UxGT("Z Steps/mm")
|
|
#define MSG_ESTEPS _UxGT("E Steps/mm")
|
|
#define MSG_E1STEPS _UxGT("E1 Steps/mm")
|
|
#define MSG_E2STEPS _UxGT("E2 Steps/mm")
|
|
#define MSG_E3STEPS _UxGT("E3 Steps/mm")
|
|
#define MSG_E4STEPS _UxGT("E4 Steps/mm")
|
|
#define MSG_TEMPERATURE _UxGT("Temperatur")
|
|
#define MSG_MOTION _UxGT("Bewegung")
|
|
#define MSG_VOLUMETRIC _UxGT("Filament")
|
|
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³")
|
|
#define MSG_FILAMENT_DIAM _UxGT("D Fil.")
|
|
#define MSG_CONTRAST _UxGT("LCD Kontrast")
|
|
#define MSG_STORE_EEPROM _UxGT("EPROM speichern")
|
|
#define MSG_LOAD_EEPROM _UxGT("EPROM laden")
|
|
#define MSG_RESTORE_FAILSAFE _UxGT("Standardkonfiguration")
|
|
#define MSG_REFRESH _UxGT("Aktualisieren")
|
|
#define MSG_WATCH _UxGT("Info")
|
|
#define MSG_PREPARE _UxGT("Vorbereitung")
|
|
#define MSG_TUNE _UxGT("Justierung")
|
|
#define MSG_PAUSE_PRINT _UxGT("SD-Druck Pause")
|
|
#define MSG_RESUME_PRINT _UxGT("SD-Druck Fortsetzung")
|
|
#define MSG_STOP_PRINT _UxGT("SD-Druck Abbruch")
|
|
#define MSG_CARD_MENU _UxGT("SD-Karte")
|
|
#define MSG_NO_CARD _UxGT("Keine SD-Karte")
|
|
#define MSG_DWELL _UxGT("Warten...")
|
|
#define MSG_USERWAIT _UxGT("Warte auf Nutzer")
|
|
#define MSG_RESUMING _UxGT("Druckfortsetzung")
|
|
#define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen")
|
|
#define MSG_NO_MOVE _UxGT("Motoren eingeschaltet")
|
|
#define MSG_KILLED _UxGT("ABGEBROCHEN")
|
|
#define MSG_STOPPED _UxGT("ANGEHALTEN")
|
|
#define MSG_CONTROL_RETRACT _UxGT("Retract mm")
|
|
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Retract mm")
|
|
#define MSG_CONTROL_RETRACTF _UxGT("Retract V")
|
|
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Hop mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
|
|
#define MSG_AUTORETRACT _UxGT("AutoRetract")
|
|
#define MSG_FILAMENTCHANGE _UxGT("Filament wechseln")
|
|
#define MSG_INIT_SDCARD _UxGT("SD-Karte erkennen") // Manually initialize the SD-card via user interface
|
|
#define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
|
|
#define MSG_ZPROBE_OUT _UxGT("Sensor ausserhalb")
|
|
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Test")
|
|
#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset")
|
|
#define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
|
#define MSG_FIRST _UxGT("homen")
|
|
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Versatz")
|
|
#define MSG_BABYSTEP_X _UxGT("Babystep X")
|
|
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
|
|
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
|
|
#define MSG_ENDSTOP_ABORT _UxGT("Endstopp-Abbr.")
|
|
#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN FEHLGESCHLAGEN")
|
|
#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMPERATURABWEICHUNG")
|
|
#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")
|
|
#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
|
|
#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
|
|
#define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
|
|
#define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
|
|
#define MSG_ERR_Z_HOMING _UxGT("G28 Z verboten")
|
|
#define MSG_HALTED _UxGT("DRUCKER STOPP")
|
|
#define MSG_PLEASE_RESET _UxGT("Bitte Resetten")
|
|
#define MSG_SHORT_DAY _UxGT("t") // One character only
|
|
#define MSG_SHORT_HOUR _UxGT("h") // One character only
|
|
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
|
|
#define MSG_HEATING _UxGT("Extr. heizt...")
|
|
#define MSG_HEATING_COMPLETE _UxGT("Extr. aufgeheizt")
|
|
#define MSG_BED_HEATING _UxGT("Bett heizt...")
|
|
#define MSG_BED_DONE _UxGT("Bett aufgeheizt")
|
|
#define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren")
|
|
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X")
|
|
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y")
|
|
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z")
|
|
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte")
|
|
#define MSG_DEBUG_MENU _UxGT("Debug Menu")
|
|
#define MSG_PROGRESS_BAR_TEST _UxGT("Fortschrittb. Test")
|
|
|
|
#define MSG_INFO_MENU _UxGT("Über den Drucker")
|
|
#define MSG_INFO_PRINTER_MENU _UxGT("Drucker Info")
|
|
#define MSG_INFO_STATS_MENU _UxGT("Drucker Stat.")
|
|
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
|
|
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistoren")
|
|
#define MSG_INFO_EXTRUDERS _UxGT("Extruder")
|
|
#define MSG_INFO_BAUDRATE _UxGT("Baud")
|
|
#define MSG_INFO_PROTOCOL _UxGT("Protokoll")
|
|
#define MSG_LIGHTS_ON _UxGT("Gehäuse Licht an")
|
|
#define MSG_LIGHTS_OFF _UxGT("Gehäuse Licht aus")
|
|
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")
|
|
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Beendete Drucke")
|
|
#define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit")
|
|
#define MSG_INFO_PRINT_LONGEST _UxGT("Längster Druckjob")
|
|
#define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert")
|
|
#else
|
|
#define MSG_INFO_PRINT_COUNT _UxGT("Drucke")
|
|
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplett")
|
|
#define MSG_INFO_PRINT_TIME _UxGT("Gesamt ")
|
|
#define MSG_INFO_PRINT_LONGEST _UxGT("Längster")
|
|
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")
|
|
#endif
|
|
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
|
|
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
|
|
#define MSG_INFO_PSU _UxGT("Stromversorgung")
|
|
|
|
#define MSG_DRIVE_STRENGTH _UxGT("Motorströme")
|
|
#define MSG_DAC_PERCENT _UxGT("Treiber %")
|
|
#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")
|
|
|
|
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ÄNDERE FILAMENT")
|
|
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ÄNDERE OPTIONEN:")
|
|
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude mehr")
|
|
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter")
|
|
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Temperatur ist ")
|
|
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ")
|
|
|
|
#if LCD_HEIGHT >= 4
|
|
// Up to 3 lines allowed
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den")
|
|
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des")
|
|
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("drücken...")
|
|
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um")
|
|
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen.")
|
|
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf.")
|
|
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Bitte warten...")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments")
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Warte auf")
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extrusion des")
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("Filaments")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes")
|
|
#else // LCD_HEIGHT < 4
|
|
// Up to 2 lines allowed
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Auswerfen...")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick")
|
|
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...")
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudieren...")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...")
|
|
#endif // LCD_HEIGHT < 4
|
|
|
|
#endif // LANGUAGE_DE_H
|