You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

248 lines
14 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Spanish
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_ES_H
#define LANGUAGE_ES_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME _UxGT(" lista.")
#define MSG_SD_INSERTED _UxGT("Tarjeta colocada")
#define MSG_SD_REMOVED _UxGT("Tarjeta retirada")
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
#define MSG_MAIN _UxGT("Menu principal")
#define MSG_AUTOSTART _UxGT("Inicio automatico")
#define MSG_DISABLE_STEPPERS _UxGT("Apagar motores")
#define MSG_DEBUG_MENU _UxGT("Menu depurar")
#define MSG_PROGRESS_BAR_TEST _UxGT("Prueba barra avance")
#define MSG_AUTO_HOME _UxGT("Llevar al origen")
#define MSG_AUTO_HOME_X _UxGT("Origen X")
#define MSG_AUTO_HOME_Y _UxGT("Origen Y")
#define MSG_AUTO_HOME_Z _UxGT("Origen Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Origen XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Iniciar (Presione)")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Siguiente punto")
#define MSG_LEVEL_BED_DONE _UxGT("Nivelacion lista!")
#define MSG_LEVEL_BED_CANCEL _UxGT("Cancelar")
#define MSG_SET_HOME_OFFSETS _UxGT("Ajustar desfases")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Desfase aplicado")
#define MSG_SET_ORIGIN _UxGT("Establecer origen")
#define MSG_PREHEAT_1 _UxGT("Precalentar PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT("Todo")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT("Plataforma")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT("Config")
#define MSG_PREHEAT_2 _UxGT("Precalentar ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT("Todo")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT("Plataforma")
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT("Config")
#define MSG_COOLDOWN _UxGT("Enfriar")
#define MSG_SWITCH_PS_ON _UxGT("Encender")
#define MSG_SWITCH_PS_OFF _UxGT("Apagar")
#define MSG_EXTRUDE _UxGT("Extruir")
#define MSG_RETRACT _UxGT("Retraer")
#define MSG_MOVE_AXIS _UxGT("Mover ejes")
#define MSG_LEVEL_BED _UxGT("Nivelar plataforma")
#define MSG_MOVING _UxGT("Moviendo...")
#define MSG_FREE_XY _UxGT("Libre XY")
#define MSG_MOVE_X _UxGT("Mover X")
#define MSG_MOVE_Y _UxGT("Mover Y")
#define MSG_MOVE_Z _UxGT("Mover Z")
#define MSG_MOVE_E _UxGT("Extrusor")
#define MSG_MOVE_01MM _UxGT("Mover 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mover 1mm")
#define MSG_MOVE_10MM _UxGT("Mover 10mm")
#define MSG_SPEED _UxGT("Velocidad")
#define MSG_BED_Z _UxGT("Plataforma Z")
#define MSG_NOZZLE _UxGT("Boquilla")
#define MSG_BED _UxGT("Plataforma")
#define MSG_FAN_SPEED _UxGT("Ventilador")
#define MSG_FLOW _UxGT("Flujo")
#define MSG_CONTROL _UxGT("Control")
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Temperatura Auto.")
#define MSG_ON _UxGT("Encender")
#define MSG_OFF _UxGT("Apagar")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Seleccionar")
#define MSG_ACC _UxGT("Aceleracion")
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("Vel. viaje min")
#define MSG_AMAX _UxGT("Acel. max")
#define MSG_A_RETRACT _UxGT("Acel. retrac.")
#define MSG_A_TRAVEL _UxGT("Acel. Viaje")
#define MSG_XSTEPS _UxGT("X pasos/mm")
#define MSG_YSTEPS _UxGT("Y pasos/mm")
#define MSG_ZSTEPS _UxGT("Z pasos/mm")
#define MSG_ESTEPS _UxGT("E pasos/mm")
#define MSG_E1STEPS _UxGT("E1 pasos/mm")
#define MSG_E2STEPS _UxGT("E2 pasos/mm")
#define MSG_E3STEPS _UxGT("E3 pasos/mm")
#define MSG_E4STEPS _UxGT("E4 pasos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimiento")
#define MSG_VOLUMETRIC _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("Contraste")
#define MSG_STORE_EEPROM _UxGT("Guardar memoria")
#define MSG_LOAD_EEPROM _UxGT("Cargar memoria")
#define MSG_RESTORE_FAILSAFE _UxGT("Restaurar memoria")
#define MSG_REFRESH _UxGT("Volver a cargar")
#define MSG_WATCH _UxGT("Informacion")
#define MSG_PREPARE _UxGT("Preparar")
#define MSG_TUNE _UxGT("Ajustar")
#define MSG_PAUSE_PRINT _UxGT("Pausar impresion")
#define MSG_RESUME_PRINT _UxGT("Reanudar impresion")
#define MSG_STOP_PRINT _UxGT("Detener impresion")
#define MSG_CARD_MENU _UxGT("Menu de SD")
#define MSG_NO_CARD _UxGT("No hay tarjeta SD")
#define MSG_DWELL _UxGT("Reposo...")
#define MSG_USERWAIT _UxGT("Esperando ordenes")
#define MSG_RESUMING _UxGT("Resumiendo impre.")
#define MSG_PRINT_ABORTED _UxGT("Impresion cancelada")
#define MSG_NO_MOVE _UxGT("Sin movimiento")
#define MSG_KILLED _UxGT("Parada de emergencia")
#define MSG_STOPPED _UxGT("Detenida")
#define MSG_CONTROL_RETRACT _UxGT("Retraer mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Interc. Retraer mm")
#define MSG_CONTROL_RETRACTF _UxGT("Retraer V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Levantar mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("DesRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Interc. DesRet mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet V")
#define MSG_AUTORETRACT _UxGT("Retraccion Auto.")
#define MSG_FILAMENTCHANGE _UxGT("Cambiar filamento")
#define MSG_INIT_SDCARD _UxGT("Iniciando tarjeta")
#define MSG_CNG_SDCARD _UxGT("Cambiar tarjeta")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z fuera")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Auto-Prueba")
#define MSG_BLTOUCH_RESET _UxGT("Reiniciar BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Desfase Z")
#define MSG_BABYSTEP_X _UxGT("Micropaso X")
#define MSG_BABYSTEP_Y _UxGT("Micropaso Y")
#define MSG_BABYSTEP_Z _UxGT("Micropaso Z")
#define MSG_ENDSTOP_ABORT _UxGT("Cancelado - Endstop")
#define MSG_HEATING_FAILED_LCD _UxGT("Error: al calentar")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Error: temperatura")
#define MSG_THERMAL_RUNAWAY _UxGT("Error de temperatura")
#define MSG_ERR_MAXTEMP _UxGT("Error: Temp Maxima")
#define MSG_ERR_MINTEMP _UxGT("Error: Temp Minima")
#define MSG_ERR_MAXTEMP_BED _UxGT("Error: Temp Max Plat")
#define MSG_ERR_MINTEMP_BED _UxGT("Error: Temp Min Plat")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Prohibido")
#define MSG_HALTED _UxGT("IMPRESORA PARADA")
#define MSG_PLEASE_RESET _UxGT("Por favor, reinicie")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Calentando...")
#define MSG_HEATING_COMPLETE _UxGT("Calentamiento listo")
#define MSG_BED_HEATING _UxGT("Calentando Plat...")
#define MSG_BED_DONE _UxGT("Plataforma Caliente")
#define MSG_DELTA_CALIBRATE _UxGT("Calibracion Delta")
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro")
#define MSG_INFO_MENU _UxGT("Inf. Impresora")
#define MSG_INFO_PRINTER_MENU _UxGT("Inf. Impresora")
#define MSG_INFO_STATS_MENU _UxGT("Estadisticas Imp.")
#define MSG_INFO_BOARD_MENU _UxGT("Inf. Controlador")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistores")
#define MSG_INFO_EXTRUDERS _UxGT("Extrusores")
#define MSG_INFO_BAUDRATE _UxGT("Baudios")
#define MSG_INFO_PROTOCOL _UxGT("Protocolo")
#define MSG_LIGHTS_ON _UxGT("Luz cabina ON")
#define MSG_LIGHTS_OFF _UxGT("Luz cabina OFF")
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresion")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas")
#define MSG_INFO_PRINT_TIME _UxGT("Tiempo total de imp.")
#define MSG_INFO_PRINT_LONGEST _UxGT("Impresion mas larga")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Total de Extrusion")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Impresiones")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas")
#define MSG_INFO_PRINT_TIME _UxGT("Total")
#define MSG_INFO_PRINT_LONGEST _UxGT("Mas larga")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrusion")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Temperatura minima")
#define MSG_INFO_MAX_TEMP _UxGT("Temperatura maxima")
#define MSG_INFO_PSU _UxGT("Fuente de poder")
#define MSG_DRIVE_STRENGTH _UxGT("Potencia driver")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Escribe DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("Cambiar Filamento")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("Opciones de cambio:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruir mas")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resumir imp.")
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Esperando iniciar")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserte filamento")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("y presione el boton")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("cambiar")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("para continuar...")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del fil. cambiar")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserte filamento")
#endif // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Esperado por")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filamento expulsado")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperado por")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Cargar filamento")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Esperado por")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extruir filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperando imp.")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("para resumir")
#endif // LANGUAGE_ES_H