You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
686 lines
22 KiB
686 lines
22 KiB
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* English
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
|
*
|
|
*/
|
|
#ifndef LANGUAGE_EN_H
|
|
#define LANGUAGE_EN_H
|
|
|
|
#ifndef WELCOME_MSG
|
|
#define WELCOME_MSG MACHINE_NAME _UxGT(" ready.")
|
|
#endif
|
|
#ifndef MSG_BACK
|
|
#define MSG_BACK _UxGT("Back")
|
|
#endif
|
|
#ifndef MSG_SD_INSERTED
|
|
#define MSG_SD_INSERTED _UxGT("Card inserted")
|
|
#endif
|
|
#ifndef MSG_SD_REMOVED
|
|
#define MSG_SD_REMOVED _UxGT("Card removed")
|
|
#endif
|
|
#ifndef MSG_LCD_ENDSTOPS
|
|
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
|
|
#endif
|
|
#ifndef MSG_MAIN
|
|
#define MSG_MAIN _UxGT("Main")
|
|
#endif
|
|
#ifndef MSG_AUTOSTART
|
|
#define MSG_AUTOSTART _UxGT("Autostart")
|
|
#endif
|
|
#ifndef MSG_DISABLE_STEPPERS
|
|
#define MSG_DISABLE_STEPPERS _UxGT("Disable steppers")
|
|
#endif
|
|
#ifndef MSG_DEBUG_MENU
|
|
#define MSG_DEBUG_MENU _UxGT("Debug Menu")
|
|
#endif
|
|
#ifndef MSG_PROGRESS_BAR_TEST
|
|
#define MSG_PROGRESS_BAR_TEST _UxGT("Progress Bar Test")
|
|
#endif
|
|
#ifndef MSG_AUTO_HOME
|
|
#define MSG_AUTO_HOME _UxGT("Auto home")
|
|
#endif
|
|
#ifndef MSG_AUTO_HOME_X
|
|
#define MSG_AUTO_HOME_X _UxGT("Home X")
|
|
#endif
|
|
#ifndef MSG_AUTO_HOME_Y
|
|
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
|
|
#endif
|
|
#ifndef MSG_AUTO_HOME_Z
|
|
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED_HOMING
|
|
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED_WAITING
|
|
#define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin")
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED_NEXT_POINT
|
|
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Next Point")
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED_DONE
|
|
#define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!")
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED_CANCEL
|
|
#define MSG_LEVEL_BED_CANCEL _UxGT("Cancel")
|
|
#endif
|
|
#ifndef MSG_SET_HOME_OFFSETS
|
|
#define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets")
|
|
#endif
|
|
#ifndef MSG_HOME_OFFSETS_APPLIED
|
|
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied")
|
|
#endif
|
|
#ifndef MSG_SET_ORIGIN
|
|
#define MSG_SET_ORIGIN _UxGT("Set origin")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1
|
|
#define MSG_PREHEAT_1 _UxGT("Preheat PLA")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1_N
|
|
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1_ALL
|
|
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" All")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1_END
|
|
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" End")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1_BEDONLY
|
|
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1_SETTINGS
|
|
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2
|
|
#define MSG_PREHEAT_2 _UxGT("Preheat ABS")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2_N
|
|
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2_ALL
|
|
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" All")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2_END
|
|
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" End")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2_BEDONLY
|
|
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed")
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2_SETTINGS
|
|
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf")
|
|
#endif
|
|
#ifndef MSG_COOLDOWN
|
|
#define MSG_COOLDOWN _UxGT("Cooldown")
|
|
#endif
|
|
#ifndef MSG_SWITCH_PS_ON
|
|
#define MSG_SWITCH_PS_ON _UxGT("Switch power on")
|
|
#endif
|
|
#ifndef MSG_SWITCH_PS_OFF
|
|
#define MSG_SWITCH_PS_OFF _UxGT("Switch power off")
|
|
#endif
|
|
#ifndef MSG_EXTRUDE
|
|
#define MSG_EXTRUDE _UxGT("Extrude")
|
|
#endif
|
|
#ifndef MSG_RETRACT
|
|
#define MSG_RETRACT _UxGT("Retract")
|
|
#endif
|
|
#ifndef MSG_MOVE_AXIS
|
|
#define MSG_MOVE_AXIS _UxGT("Move axis")
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED
|
|
#define MSG_LEVEL_BED _UxGT("Level bed")
|
|
#endif
|
|
#ifndef MSG_MOVING
|
|
#define MSG_MOVING _UxGT("Moving...")
|
|
#endif
|
|
#ifndef MSG_FREE_XY
|
|
#define MSG_FREE_XY _UxGT("Free XY")
|
|
#endif
|
|
#ifndef MSG_MOVE_X
|
|
#define MSG_MOVE_X _UxGT("Move X")
|
|
#endif
|
|
#ifndef MSG_MOVE_Y
|
|
#define MSG_MOVE_Y _UxGT("Move Y")
|
|
#endif
|
|
#ifndef MSG_MOVE_Z
|
|
#define MSG_MOVE_Z _UxGT("Move Z")
|
|
#endif
|
|
#ifndef MSG_MOVE_E
|
|
#define MSG_MOVE_E _UxGT("Extruder")
|
|
#endif
|
|
#ifndef MSG_MOVE_01MM
|
|
#define MSG_MOVE_01MM _UxGT("Move 0.1mm")
|
|
#endif
|
|
#ifndef MSG_MOVE_1MM
|
|
#define MSG_MOVE_1MM _UxGT("Move 1mm")
|
|
#endif
|
|
#ifndef MSG_MOVE_10MM
|
|
#define MSG_MOVE_10MM _UxGT("Move 10mm")
|
|
#endif
|
|
#ifndef MSG_SPEED
|
|
#define MSG_SPEED _UxGT("Speed")
|
|
#endif
|
|
#ifndef MSG_BED_Z
|
|
#define MSG_BED_Z _UxGT("Bed Z")
|
|
#endif
|
|
#ifndef MSG_NOZZLE
|
|
#define MSG_NOZZLE _UxGT("Nozzle")
|
|
#endif
|
|
#ifndef MSG_BED
|
|
#define MSG_BED _UxGT("Bed")
|
|
#endif
|
|
#ifndef MSG_FAN_SPEED
|
|
#define MSG_FAN_SPEED _UxGT("Fan speed")
|
|
#endif
|
|
#ifndef MSG_FLOW
|
|
#define MSG_FLOW _UxGT("Flow")
|
|
#endif
|
|
#ifndef MSG_CONTROL
|
|
#define MSG_CONTROL _UxGT("Control")
|
|
#endif
|
|
#ifndef MSG_MIN
|
|
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
|
|
#endif
|
|
#ifndef MSG_MAX
|
|
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
|
|
#endif
|
|
#ifndef MSG_FACTOR
|
|
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
|
|
#endif
|
|
#ifndef MSG_AUTOTEMP
|
|
#define MSG_AUTOTEMP _UxGT("Autotemp")
|
|
#endif
|
|
#ifndef MSG_ON
|
|
#define MSG_ON _UxGT("On ")
|
|
#endif
|
|
#ifndef MSG_OFF
|
|
#define MSG_OFF _UxGT("Off")
|
|
#endif
|
|
#ifndef MSG_PID_P
|
|
#define MSG_PID_P _UxGT("PID-P")
|
|
#endif
|
|
#ifndef MSG_PID_I
|
|
#define MSG_PID_I _UxGT("PID-I")
|
|
#endif
|
|
#ifndef MSG_PID_D
|
|
#define MSG_PID_D _UxGT("PID-D")
|
|
#endif
|
|
#ifndef MSG_PID_C
|
|
#define MSG_PID_C _UxGT("PID-C")
|
|
#endif
|
|
#ifndef MSG_SELECT
|
|
#define MSG_SELECT _UxGT("Select")
|
|
#endif
|
|
#ifndef MSG_ACC
|
|
#define MSG_ACC _UxGT("Accel")
|
|
#endif
|
|
#ifndef MSG_VX_JERK
|
|
#define MSG_VX_JERK _UxGT("Vx-jerk")
|
|
#endif
|
|
#ifndef MSG_VY_JERK
|
|
#define MSG_VY_JERK _UxGT("Vy-jerk")
|
|
#endif
|
|
#ifndef MSG_VZ_JERK
|
|
#define MSG_VZ_JERK _UxGT("Vz-jerk")
|
|
#endif
|
|
#ifndef MSG_VE_JERK
|
|
#define MSG_VE_JERK _UxGT("Ve-jerk")
|
|
#endif
|
|
#ifndef MSG_VMAX
|
|
#define MSG_VMAX _UxGT("Vmax ")
|
|
#endif
|
|
#ifndef MSG_VMIN
|
|
#define MSG_VMIN _UxGT("Vmin")
|
|
#endif
|
|
#ifndef MSG_VTRAV_MIN
|
|
#define MSG_VTRAV_MIN _UxGT("VTrav min")
|
|
#endif
|
|
#ifndef MSG_AMAX
|
|
#define MSG_AMAX _UxGT("Amax ")
|
|
#endif
|
|
#ifndef MSG_A_RETRACT
|
|
#define MSG_A_RETRACT _UxGT("A-retract")
|
|
#endif
|
|
#ifndef MSG_A_TRAVEL
|
|
#define MSG_A_TRAVEL _UxGT("A-travel")
|
|
#endif
|
|
#ifndef MSG_XSTEPS
|
|
#define MSG_XSTEPS _UxGT("Xsteps/mm")
|
|
#endif
|
|
#ifndef MSG_YSTEPS
|
|
#define MSG_YSTEPS _UxGT("Ysteps/mm")
|
|
#endif
|
|
#ifndef MSG_ZSTEPS
|
|
#define MSG_ZSTEPS _UxGT("Zsteps/mm")
|
|
#endif
|
|
#ifndef MSG_ESTEPS
|
|
#define MSG_ESTEPS _UxGT("Esteps/mm")
|
|
#endif
|
|
#ifndef MSG_E1STEPS
|
|
#define MSG_E1STEPS _UxGT("E1steps/mm")
|
|
#endif
|
|
#ifndef MSG_E2STEPS
|
|
#define MSG_E2STEPS _UxGT("E2steps/mm")
|
|
#endif
|
|
#ifndef MSG_E3STEPS
|
|
#define MSG_E3STEPS _UxGT("E3steps/mm")
|
|
#endif
|
|
#ifndef MSG_E4STEPS
|
|
#define MSG_E4STEPS _UxGT("E4steps/mm")
|
|
#endif
|
|
#ifndef MSG_E5STEPS
|
|
#define MSG_E5STEPS _UxGT("E5steps/mm")
|
|
#endif
|
|
#ifndef MSG_TEMPERATURE
|
|
#define MSG_TEMPERATURE _UxGT("Temperature")
|
|
#endif
|
|
#ifndef MSG_MOTION
|
|
#define MSG_MOTION _UxGT("Motion")
|
|
#endif
|
|
#ifndef MSG_FILAMENT
|
|
#define MSG_FILAMENT _UxGT("Filament")
|
|
#endif
|
|
#ifndef MSG_VOLUMETRIC_ENABLED
|
|
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_DIAM
|
|
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
|
|
#endif
|
|
#ifndef MSG_ADVANCE_K
|
|
#define MSG_ADVANCE_K _UxGT("Advance K")
|
|
#endif
|
|
#ifndef MSG_CONTRAST
|
|
#define MSG_CONTRAST _UxGT("LCD contrast")
|
|
#endif
|
|
#ifndef MSG_STORE_EEPROM
|
|
#define MSG_STORE_EEPROM _UxGT("Store memory")
|
|
#endif
|
|
#ifndef MSG_LOAD_EEPROM
|
|
#define MSG_LOAD_EEPROM _UxGT("Load memory")
|
|
#endif
|
|
#ifndef MSG_RESTORE_FAILSAFE
|
|
#define MSG_RESTORE_FAILSAFE _UxGT("Restore failsafe")
|
|
#endif
|
|
#ifndef MSG_REFRESH
|
|
#define MSG_REFRESH _UxGT("Refresh")
|
|
#endif
|
|
#ifndef MSG_WATCH
|
|
#define MSG_WATCH _UxGT("Info screen")
|
|
#endif
|
|
#ifndef MSG_PREPARE
|
|
#define MSG_PREPARE _UxGT("Prepare")
|
|
#endif
|
|
#ifndef MSG_TUNE
|
|
#define MSG_TUNE _UxGT("Tune")
|
|
#endif
|
|
#ifndef MSG_PAUSE_PRINT
|
|
#define MSG_PAUSE_PRINT _UxGT("Pause print")
|
|
#endif
|
|
#ifndef MSG_RESUME_PRINT
|
|
#define MSG_RESUME_PRINT _UxGT("Resume print")
|
|
#endif
|
|
#ifndef MSG_STOP_PRINT
|
|
#define MSG_STOP_PRINT _UxGT("Stop print")
|
|
#endif
|
|
#ifndef MSG_CARD_MENU
|
|
#define MSG_CARD_MENU _UxGT("Print from SD")
|
|
#endif
|
|
#ifndef MSG_NO_CARD
|
|
#define MSG_NO_CARD _UxGT("No SD card")
|
|
#endif
|
|
#ifndef MSG_DWELL
|
|
#define MSG_DWELL _UxGT("Sleep...")
|
|
#endif
|
|
#ifndef MSG_USERWAIT
|
|
#define MSG_USERWAIT _UxGT("Click to resume...")
|
|
#endif
|
|
#ifndef MSG_RESUMING
|
|
#define MSG_RESUMING _UxGT("Resuming print")
|
|
#endif
|
|
#ifndef MSG_PRINT_ABORTED
|
|
#define MSG_PRINT_ABORTED _UxGT("Print aborted")
|
|
#endif
|
|
#ifndef MSG_NO_MOVE
|
|
#define MSG_NO_MOVE _UxGT("No move.")
|
|
#endif
|
|
#ifndef MSG_KILLED
|
|
#define MSG_KILLED _UxGT("KILLED. ")
|
|
#endif
|
|
#ifndef MSG_STOPPED
|
|
#define MSG_STOPPED _UxGT("STOPPED. ")
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT
|
|
#define MSG_CONTROL_RETRACT _UxGT("Retract mm")
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT_SWAP
|
|
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm")
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACTF
|
|
#define MSG_CONTROL_RETRACTF _UxGT("Retract V")
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT_ZLIFT
|
|
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm")
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT_RECOVER
|
|
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT_RECOVER_SWAP
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm")
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT_RECOVERF
|
|
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
|
|
#endif
|
|
#ifndef MSG_AUTORETRACT
|
|
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
|
|
#endif
|
|
#ifndef MSG_FILAMENTCHANGE
|
|
#define MSG_FILAMENTCHANGE _UxGT("Change filament")
|
|
#endif
|
|
#ifndef MSG_INIT_SDCARD
|
|
#define MSG_INIT_SDCARD _UxGT("Init. SD card")
|
|
#endif
|
|
#ifndef MSG_CNG_SDCARD
|
|
#define MSG_CNG_SDCARD _UxGT("Change SD card")
|
|
#endif
|
|
#ifndef MSG_ZPROBE_OUT
|
|
#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
|
|
#endif
|
|
#ifndef MSG_BLTOUCH
|
|
#define MSG_BLTOUCH _UxGT("BLTouch")
|
|
#endif
|
|
#ifndef MSG_BLTOUCH_SELFTEST
|
|
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
|
|
#endif
|
|
#ifndef MSG_BLTOUCH_RESET
|
|
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
|
|
#endif
|
|
#ifndef MSG_BLTOUCH_DEPLOY
|
|
#define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch")
|
|
#endif
|
|
#ifndef MSG_BLTOUCH_STOW
|
|
#define MSG_BLTOUCH_STOW _UxGT("Stow BLTouch")
|
|
#endif
|
|
#ifndef MSG_HOME
|
|
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
|
#endif
|
|
#ifndef MSG_FIRST
|
|
#define MSG_FIRST _UxGT("first")
|
|
#endif
|
|
#ifndef MSG_ZPROBE_ZOFFSET
|
|
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
|
|
#endif
|
|
#ifndef MSG_BABYSTEP_X
|
|
#define MSG_BABYSTEP_X _UxGT("Babystep X")
|
|
#endif
|
|
#ifndef MSG_BABYSTEP_Y
|
|
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
|
|
#endif
|
|
#ifndef MSG_BABYSTEP_Z
|
|
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
|
|
#endif
|
|
#ifndef MSG_ENDSTOP_ABORT
|
|
#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
|
|
#endif
|
|
#ifndef MSG_HEATING_FAILED_LCD
|
|
#define MSG_HEATING_FAILED_LCD _UxGT("Heating failed")
|
|
#endif
|
|
#ifndef MSG_ERR_REDUNDANT_TEMP
|
|
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP")
|
|
#endif
|
|
#ifndef MSG_THERMAL_RUNAWAY
|
|
#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY")
|
|
#endif
|
|
#ifndef MSG_ERR_MAXTEMP
|
|
#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP")
|
|
#endif
|
|
#ifndef MSG_ERR_MINTEMP
|
|
#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP")
|
|
#endif
|
|
#ifndef MSG_ERR_MAXTEMP_BED
|
|
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
|
|
#endif
|
|
#ifndef MSG_ERR_MINTEMP_BED
|
|
#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
|
|
#endif
|
|
#ifndef MSG_ERR_Z_HOMING
|
|
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")
|
|
#endif
|
|
#ifndef MSG_HALTED
|
|
#define MSG_HALTED _UxGT("PRINTER HALTED")
|
|
#endif
|
|
#ifndef MSG_PLEASE_RESET
|
|
#define MSG_PLEASE_RESET _UxGT("Please reset")
|
|
#endif
|
|
#ifndef MSG_SHORT_DAY
|
|
#define MSG_SHORT_DAY _UxGT("d") // One character only
|
|
#endif
|
|
#ifndef MSG_SHORT_HOUR
|
|
#define MSG_SHORT_HOUR _UxGT("h") // One character only
|
|
#endif
|
|
#ifndef MSG_SHORT_MINUTE
|
|
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
|
|
#endif
|
|
#ifndef MSG_HEATING
|
|
#define MSG_HEATING _UxGT("Heating...")
|
|
#endif
|
|
#ifndef MSG_HEATING_COMPLETE
|
|
#define MSG_HEATING_COMPLETE _UxGT("Heating done.")
|
|
#endif
|
|
#ifndef MSG_BED_HEATING
|
|
#define MSG_BED_HEATING _UxGT("Bed Heating.")
|
|
#endif
|
|
#ifndef MSG_BED_DONE
|
|
#define MSG_BED_DONE _UxGT("Bed done.")
|
|
#endif
|
|
#ifndef MSG_DELTA_CALIBRATE
|
|
#define MSG_DELTA_CALIBRATE _UxGT("Delta Calibration")
|
|
#endif
|
|
#ifndef MSG_DELTA_CALIBRATE_X
|
|
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrate X")
|
|
#endif
|
|
#ifndef MSG_DELTA_CALIBRATE_Y
|
|
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrate Y")
|
|
#endif
|
|
#ifndef MSG_DELTA_CALIBRATE_Z
|
|
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrate Z")
|
|
#endif
|
|
#ifndef MSG_DELTA_CALIBRATE_CENTER
|
|
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center")
|
|
#endif
|
|
#ifndef MSG_DELTA_AUTO_CALIBRATE
|
|
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration")
|
|
#endif
|
|
#ifndef MSG_DELTA_HEIGHT_CALIBRATE
|
|
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height")
|
|
#endif
|
|
#ifndef MSG_INFO_MENU
|
|
#define MSG_INFO_MENU _UxGT("About Printer")
|
|
#endif
|
|
#ifndef MSG_INFO_PRINTER_MENU
|
|
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
|
|
#endif
|
|
#ifndef MSG_INFO_STATS_MENU
|
|
#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
|
|
#endif
|
|
#ifndef MSG_INFO_BOARD_MENU
|
|
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
|
|
#endif
|
|
#ifndef MSG_INFO_THERMISTOR_MENU
|
|
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
|
|
#endif
|
|
#ifndef MSG_INFO_EXTRUDERS
|
|
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
|
|
#endif
|
|
#ifndef MSG_INFO_BAUDRATE
|
|
#define MSG_INFO_BAUDRATE _UxGT("Baud")
|
|
#endif
|
|
#ifndef MSG_INFO_PROTOCOL
|
|
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
|
|
#endif
|
|
#ifndef MSG_LIGHTS_ON
|
|
#define MSG_LIGHTS_ON _UxGT("Case light on")
|
|
#endif
|
|
#ifndef MSG_LIGHTS_OFF
|
|
#define MSG_LIGHTS_OFF _UxGT("Case light off")
|
|
#endif
|
|
|
|
#if LCD_WIDTH >= 20
|
|
#ifndef MSG_INFO_PRINT_COUNT
|
|
#define MSG_INFO_PRINT_COUNT _UxGT("Print Count")
|
|
#endif
|
|
#ifndef MSG_INFO_COMPLETED_PRINTS
|
|
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_TIME
|
|
#define MSG_INFO_PRINT_TIME _UxGT("Total print time")
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_LONGEST
|
|
#define MSG_INFO_PRINT_LONGEST _UxGT("Longest job time")
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_FILAMENT
|
|
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded total")
|
|
#endif
|
|
#else
|
|
#ifndef MSG_INFO_PRINT_COUNT
|
|
#define MSG_INFO_PRINT_COUNT _UxGT("Prints")
|
|
#endif
|
|
#ifndef MSG_INFO_COMPLETED_PRINTS
|
|
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_TIME
|
|
#define MSG_INFO_PRINT_TIME _UxGT("Total")
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_LONGEST
|
|
#define MSG_INFO_PRINT_LONGEST _UxGT("Longest")
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_FILAMENT
|
|
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded")
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef MSG_INFO_MIN_TEMP
|
|
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
|
|
#endif
|
|
#ifndef MSG_INFO_MAX_TEMP
|
|
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
|
|
#endif
|
|
#ifndef MSG_INFO_PSU
|
|
#define MSG_INFO_PSU _UxGT("Power Supply")
|
|
#endif
|
|
|
|
#ifndef MSG_DRIVE_STRENGTH
|
|
#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength")
|
|
#endif
|
|
#ifndef MSG_DAC_PERCENT
|
|
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
|
#endif
|
|
#ifndef MSG_DAC_EEPROM_WRITE
|
|
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_HEADER
|
|
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("CHANGE FILAMENT")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_OPTION_HEADER
|
|
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("CHANGE OPTIONS:")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_OPTION_EXTRUDE
|
|
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude more")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME
|
|
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_MINTEMP
|
|
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Minimum Temp is ")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_NOZZLE
|
|
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ")
|
|
#endif
|
|
|
|
//
|
|
// Filament Change screens show up to 3 lines on a 4-line display
|
|
// ...or up to 2 lines on a 3-line display
|
|
//
|
|
#if LCD_HEIGHT >= 4
|
|
#ifndef MSG_FILAMENT_CHANGE_INIT_1
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start")
|
|
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament")
|
|
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_UNLOAD_1
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_INSERT_1
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_HEAT_1
|
|
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to")
|
|
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_HEATING_1
|
|
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle")
|
|
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_LOAD_1
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wait for")
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_RESUME_1
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
|
|
#endif
|
|
#else // LCD_HEIGHT < 4
|
|
#ifndef MSG_FILAMENT_CHANGE_INIT_1
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_UNLOAD_1
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_INSERT_1
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_HEATING_1
|
|
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating...")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_LOAD_1
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruding...")
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_RESUME_1
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...")
|
|
#endif
|
|
#endif // LCD_HEIGHT < 4
|
|
|
|
#endif // LANGUAGE_EN_H
|