You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

174 lines
9.2 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* German
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_DE_H
#define LANGUAGE_DE_H
#define MAPPER_C2C3
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " bereit"
#define MSG_SD_INSERTED "SD-Karte erkannt"
#define MSG_SD_REMOVED "SD-Karte entfernt"
#define MSG_MAIN "Hauptmenü"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Motoren aus" // M84
#define MSG_AUTO_HOME "Home" // G28
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Klick für Start"
#define MSG_LEVEL_BED_DONE "Fertig"
#define MSG_LEVEL_BED_CANCEL "Abbruch"
#define MSG_SET_HOME_OFFSETS "Setze Homeoffsets"
#define MSG_HOME_OFFSETS_APPLIED "Offsets aktiv"
#define MSG_SET_ORIGIN "Setze Nullpunkt" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
#define MSG_PREHEAT_PLA_N "Vorwärmen PLA "
#define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle"
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
#define MSG_PREHEAT_PLA_SETTINGS "Vorw. PLA Einst."
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
#define MSG_PREHEAT_ABS_N "Vorwärmen ABS "
#define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle"
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
#define MSG_PREHEAT_ABS_SETTINGS "Vorw. ABS Einst."
#define MSG_COOLDOWN "Abkühlen"
#define MSG_SWITCH_PS_ON "Netzteil ein"
#define MSG_SWITCH_PS_OFF "Netzteil aus"
#define MSG_EXTRUDE "Extrudieren"
#define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Bewegen"
#define MSG_LEVEL_BED "Bett nivellieren"
#define MSG_MOVE_X "X"
#define MSG_MOVE_Y "Y"
#define MSG_MOVE_Z "Z"
#define MSG_MOVE_E "E"
#define MSG_MOVE_01MM " 0.1 mm"
#define MSG_MOVE_1MM " 1.0 mm"
#define MSG_MOVE_10MM "10.0 mm"
#define MSG_SPEED "Geschw."
#define MSG_BED_Z "Bett Z"
#define MSG_NOZZLE "Düse"
#define MSG_BED "Bett"
#define MSG_FAN_SPEED "Lüfter"
#define MSG_FLOW "Durchfluss"
#define MSG_CONTROL "Einstellungen"
#define MSG_MIN LCD_STR_THERMOMETER " min"
#define MSG_MAX LCD_STR_THERMOMETER " max"
#define MSG_FACTOR LCD_STR_THERMOMETER " Faktor"
#define MSG_AUTOTEMP "AutoTemp"
#define MSG_ON "Ein"
#define MSG_OFF "Aus"
#define MSG_PID_P "PID P"
#define MSG_PID_I "PID I"
#define MSG_PID_D "PID D"
#define MSG_PID_C "PID C"
#define MSG_ACC "A"
#define MSG_VXY_JERK "V XY Jerk"
#define MSG_VZ_JERK "V Z Jerk"
#define MSG_VE_JERK "V E Jerk"
#define MSG_VMAX "V max " // space by purpose
#define MSG_X "X"
#define MSG_Y "Y"
#define MSG_Z "Z"
#define MSG_E "E"
#define MSG_VMIN "V min"
#define MSG_VTRAV_MIN "V min Leerfahrt"
#define MSG_AMAX "A max " // space by purpose
#define MSG_A_RETRACT "A Retract"
#define MSG_A_TRAVEL "A Leerfahrt"
#define MSG_XSTEPS "X Steps/mm"
#define MSG_YSTEPS "Y Steps/mm"
#define MSG_ZSTEPS "Z Steps/mm"
#define MSG_ESTEPS "E Steps/mm"
#define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bewegung"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
#define MSG_FILAMENT_DIAM "D Fil."
#define MSG_CONTRAST "LCD Kontrast"
#define MSG_STORE_EPROM "EPROM speichern"
#define MSG_LOAD_EPROM "EPROM laden"
#define MSG_RESTORE_FAILSAFE "Standardkonfiguration"
#define MSG_REFRESH "Aktualisieren"
#define MSG_WATCH "Info"
#define MSG_PREPARE "Vorbereitung"
#define MSG_TUNE "Justierung"
#define MSG_PAUSE_PRINT "SD-Druck Pause"
#define MSG_RESUME_PRINT "SD-Druck Fortsetzung"
#define MSG_STOP_PRINT "SD-Druck Abbruch"
#define MSG_CARD_MENU "SD-Karte"
#define MSG_NO_CARD "Keine SD-Karte"
#define MSG_DWELL "Warten..."
#define MSG_USERWAIT "Warte auf Nutzer"
#define MSG_RESUMING "Druckfortsetzung"
#define MSG_PRINT_ABORTED "Druck abgebrochen"
#define MSG_NO_MOVE "Motoren eingeschaltet"
#define MSG_KILLED "KILLED"
#define MSG_STOPPED "ANGEHALTEN"
#define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
#define MSG_CONTROL_RETRACTF "Retract V"
#define MSG_CONTROL_RETRACT_ZLIFT "Z-Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetract"
#define MSG_FILAMENTCHANGE "Filament wechseln"
#define MSG_INIT_SDCARD "SD-Karte erkennen" // Manually initialize the SD-card via user interface
#define MSG_CNG_SDCARD "SD-Karte getauscht" // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
#define MSG_ZPROBE_OUT "Sensor ausserhalb"
#define MSG_YX_UNHOMED "X/Y vor Z homen!"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop-Abbr. ein"
#define MSG_HEATING_FAILED_LCD "HEIZEN FEHLGESCHLAGEN"
#define MSG_ERR_REDUNDANT_TEMP "REDUND. TEMPERATURABWEICHUNG"
#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER " NICHT ERREICHT"
#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER " ÜBERSCHRITTEN"
#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER " UNTERSCHRITTEN"
#define MSG_ERR_MAXTEMP_BED "BETT " LCD_STR_THERMOMETER " ÜBERSCHRITTEN"
#define MSG_ERR_MINTEMP_BED "BETT " LCD_STR_THERMOMETER " UNTERSCHRITTEN"
#define MSG_END_HOUR "Stunden"
#define MSG_END_MINUTE "Minuten"
#define MSG_HEATING "Aufheizen..."
#define MSG_HEATING_COMPLETE "Aufgeheizt"
#define MSG_BED_HEATING "Bett aufheizen"
#define MSG_BED_DONE "Bett aufgeheizt"
#define MSG_DELTA_CALIBRATE "Delta kalibrieren"
#define MSG_DELTA_CALIBRATE_X "Kalibriere X"
#define MSG_DELTA_CALIBRATE_Y "Kalibriere Y"
#define MSG_DELTA_CALIBRATE_Z "Kalibriere Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibriere Mitte"
#endif // LANGUAGE_DE_H