You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1034 lines
29 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef ULTRALCD_IMPL_HD44780_H
#define ULTRALCD_IMPL_HD44780_H
/**
* Implementation of the LCD display routines for a Hitachi HD44780 display.
* These are the most common LCD character displays.
*/
#include "utility.h"
#include "duration_t.h"
extern volatile uint8_t buttons; //an extended version of the last checked buttons in a bit array.
////////////////////////////////////
// Setup button and encode mappings for each panel (into 'buttons' variable
//
// This is just to map common functions (across different panels) onto the same
// macro name. The mapping is independent of whether the button is directly connected or
// via a shift/i2c register.
#if ENABLED(ULTIPANEL)
//
// Setup other button mappings of each panel
//
#if ENABLED(LCD_I2C_VIKI)
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
// button and encoder bit positions within 'buttons'
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
#if BUTTON_EXISTS(ENC)
// the pause/stop/restart button is connected to BTN_ENC when used
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
#undef LCD_CLICKED
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
#else
#undef LCD_CLICKED
#define LCD_CLICKED (buttons&(B_MI|B_RI))
#endif
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS
#elif ENABLED(LCD_I2C_PANELOLU2)
#if !BUTTON_EXISTS(ENC) // Use I2C if not directly connected to a pin
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
#define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
#undef LCD_CLICKED
#define LCD_CLICKED (buttons & B_MI)
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS
#endif
#elif DISABLED(NEWPANEL) // old style ULTIPANEL
// Shift register bits correspond to buttons:
#define BL_LE 7 // Left
#define BL_UP 6 // Up
#define BL_MI 5 // Middle
#define BL_DW 4 // Down
#define BL_RI 3 // Right
#define BL_ST 2 // Red Button
#define B_LE (_BV(BL_LE))
#define B_UP (_BV(BL_UP))
#define B_MI (_BV(BL_MI))
#define B_DW (_BV(BL_DW))
#define B_RI (_BV(BL_RI))
#define B_ST (_BV(BL_ST))
#define LCD_CLICKED ((buttons & B_MI) || (buttons & B_ST))
#endif
#endif // ULTIPANEL
////////////////////////////////////
// Create LCD class instance and chipset-specific information
#if ENABLED(LCD_I2C_TYPE_PCF8575)
// note: these are register mapped pins on the PCF8575 controller not Arduino pins
#define LCD_I2C_PIN_BL 3
#define LCD_I2C_PIN_EN 2
#define LCD_I2C_PIN_RW 1
#define LCD_I2C_PIN_RS 0
#define LCD_I2C_PIN_D4 4
#define LCD_I2C_PIN_D5 5
#define LCD_I2C_PIN_D6 6
#define LCD_I2C_PIN_D7 7
#include <Wire.h>
#include <LCD.h>
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_I2C_PIN_EN, LCD_I2C_PIN_RW, LCD_I2C_PIN_RS, LCD_I2C_PIN_D4, LCD_I2C_PIN_D5, LCD_I2C_PIN_D6, LCD_I2C_PIN_D7);
#elif ENABLED(LCD_I2C_TYPE_MCP23017)
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
#define LED_A 0x04 //100
#define LED_B 0x02 //010
#define LED_C 0x01 //001
#define LCD_HAS_STATUS_INDICATORS
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
#if ENABLED(DETECT_DEVICE)
LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
#else
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#endif
#elif ENABLED(LCD_I2C_TYPE_MCP23008)
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
#if ENABLED(DETECT_DEVICE)
LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
#else
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#endif
#elif ENABLED(LCD_I2C_TYPE_PCA8574)
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#elif ENABLED(SR_LCD_2W_NL)
extern "C" void __cxa_pure_virtual() { while (1); }
#include <LCD.h>
#include <LiquidCrystal_SR.h>
#define LCD_CLASS LiquidCrystal_SR
#if PIN_EXISTS(SR_STROBE)
LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN, SR_STROBE_PIN);
#else
LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN);
#endif
#elif ENABLED(LCM1602)
#include <Wire.h>
#include <LCD.h>
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);
#else
// Standard directly connected LCD implementations
#include <LiquidCrystal.h>
#define LCD_CLASS LiquidCrystal
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5, LCD_PINS_D6, LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
#endif
#include "utf_mapper.h"
#if ENABLED(LCD_PROGRESS_BAR)
static millis_t progress_bar_ms = 0;
#if PROGRESS_MSG_EXPIRE > 0
static millis_t expire_status_ms = 0;
#endif
#define LCD_STR_PROGRESS "\x03\x04\x05"
#endif
#if ENABLED(LCD_HAS_STATUS_INDICATORS)
static void lcd_implementation_update_indicators();
#endif
static void lcd_set_custom_characters(
#if ENABLED(LCD_PROGRESS_BAR)
const bool info_screen_charset = true
#endif
) {
static byte bedTemp[8] = {
B00000,
B11111,
B10101,
B10001,
B10101,
B11111,
B00000,
B00000
}; //thanks Sonny Mounicou
static byte degree[8] = {
B01100,
B10010,
B10010,
B01100,
B00000,
B00000,
B00000,
B00000
};
static byte thermometer[8] = {
B00100,
B01010,
B01010,
B01010,
B01010,
B10001,
B10001,
B01110
};
static byte uplevel[8] = {
B00100,
B01110,
B11111,
B00100,
B11100,
B00000,
B00000,
B00000
}; //thanks joris
static byte feedrate[8] = {
B11100,
B10000,
B11000,
B10111,
B00101,
B00110,
B00101,
B00000
}; //thanks Sonny Mounicou
static byte clock[8] = {
B00000,
B01110,
B10011,
B10101,
B10001,
B01110,
B00000,
B00000
}; //thanks Sonny Mounicou
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
lcd.createChar(LCD_STR_DEGREE[0], degree);
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
lcd.createChar(LCD_STR_CLOCK[0], clock);
#if ENABLED(SDSUPPORT)
static byte refresh[8] = {
B00000,
B00110,
B11001,
B11000,
B00011,
B10011,
B01100,
B00000,
}; //thanks joris
static byte folder[8] = {
B00000,
B11100,
B11111,
B10001,
B10001,
B11111,
B00000,
B00000
}; //thanks joris
#if ENABLED(LCD_PROGRESS_BAR)
static byte progress[3][8] = { {
B00000,
B10000,
B10000,
B10000,
B10000,
B10000,
B10000,
B00000
}, {
B00000,
B10100,
B10100,
B10100,
B10100,
B10100,
B10100,
B00000
}, {
B00000,
B10101,
B10101,
B10101,
B10101,
B10101,
B10101,
B00000
} };
static bool char_mode = false;
if (info_screen_charset != char_mode) {
char_mode = info_screen_charset;
if (info_screen_charset) { // Progress bar characters for info screen
for (int i = 3; i--;) lcd.createChar(LCD_STR_PROGRESS[i], progress[i]);
}
else { // Custom characters for submenus
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
lcd.createChar(LCD_STR_REFRESH[0], refresh);
lcd.createChar(LCD_STR_FOLDER[0], folder);
}
}
#else
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
lcd.createChar(LCD_STR_REFRESH[0], refresh);
lcd.createChar(LCD_STR_FOLDER[0], folder);
#endif
#else
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
#endif
}
static void lcd_implementation_init(
#if ENABLED(LCD_PROGRESS_BAR)
const bool info_screen_charset = true
#endif
) {
#if ENABLED(LCD_I2C_TYPE_PCF8575)
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#ifdef LCD_I2C_PIN_BL
lcd.setBacklightPin(LCD_I2C_PIN_BL, POSITIVE);
lcd.setBacklight(HIGH);
#endif
#elif ENABLED(LCD_I2C_TYPE_MCP23017)
lcd.setMCPType(LTI_TYPE_MCP23017);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
lcd_implementation_update_indicators();
#elif ENABLED(LCD_I2C_TYPE_MCP23008)
lcd.setMCPType(LTI_TYPE_MCP23008);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#elif ENABLED(LCD_I2C_TYPE_PCA8574)
lcd.init();
lcd.backlight();
#else
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#endif
lcd_set_custom_characters(
#if ENABLED(LCD_PROGRESS_BAR)
info_screen_charset
#endif
);
lcd.clear();
}
void lcd_implementation_clear() { lcd.clear(); }
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
void lcd_printPGM(const char *str) {
for (; char c = pgm_read_byte(str); ++str) charset_mapper(c);
}
void lcd_print(const char* const str) {
for (uint8_t i = 0; const char c = str[i]; ++i) charset_mapper(c);
}
void lcd_print(const char c) { charset_mapper(c); }
#if ENABLED(SHOW_BOOTSCREEN)
void lcd_erase_line(const int line) {
lcd.setCursor(0, line);
for (uint8_t i = LCD_WIDTH + 1; --i;)
lcd.print(' ');
}
// Scroll the PSTR 'text' in a 'len' wide field for 'time' milliseconds at position col,line
void lcd_scroll(const int col, const int line, const char* const text, const int len, const int time) {
char tmp[LCD_WIDTH + 1] = {0};
int n = max(lcd_strlen_P(text) - len, 0);
for (int i = 0; i <= n; i++) {
strncpy_P(tmp, text + i, min(len, LCD_WIDTH));
lcd.setCursor(col, line);
lcd_print(tmp);
delay(time / max(n, 1));
}
}
static void logo_lines(const char* const extra) {
int indent = (LCD_WIDTH - 8 - lcd_strlen_P(extra)) / 2;
lcd.setCursor(indent, 0); lcd.print('\x00'); lcd_printPGM(PSTR( "------" )); lcd.print('\x01');
lcd.setCursor(indent, 1); lcd_printPGM(PSTR("|Marlin|")); lcd_printPGM(extra);
lcd.setCursor(indent, 2); lcd.print('\x02'); lcd_printPGM(PSTR( "------" )); lcd.print('\x03');
}
void bootscreen() {
byte top_left[8] = {
B00000,
B00000,
B00000,
B00000,
B00001,
B00010,
B00100,
B00100
};
byte top_right[8] = {
B00000,
B00000,
B00000,
B11100,
B11100,
B01100,
B00100,
B00100
};
byte botom_left[8] = {
B00100,
B00010,
B00001,
B00000,
B00000,
B00000,
B00000,
B00000
};
byte botom_right[8] = {
B00100,
B01000,
B10000,
B00000,
B00000,
B00000,
B00000,
B00000
};
lcd.createChar(0, top_left);
lcd.createChar(1, top_right);
lcd.createChar(2, botom_left);
lcd.createChar(3, botom_right);
lcd.clear();
#define LCD_EXTRA_SPACE (LCD_WIDTH-8)
#define CENTER_OR_SCROLL(STRING,DELAY) \
lcd_erase_line(3); \
if (strlen(STRING) <= LCD_WIDTH) { \
lcd.setCursor((LCD_WIDTH - lcd_strlen_P(PSTR(STRING))) / 2, 3); \
lcd_printPGM(PSTR(STRING)); \
safe_delay(DELAY); \
} \
else { \
lcd_scroll(0, 3, PSTR(STRING), LCD_WIDTH, DELAY); \
}
#ifdef STRING_SPLASH_LINE1
//
// Show the Marlin logo with splash line 1
//
if (LCD_EXTRA_SPACE >= strlen(STRING_SPLASH_LINE1) + 1) {
//
// Show the Marlin logo, splash line1, and splash line 2
//
logo_lines(PSTR(" " STRING_SPLASH_LINE1));
#ifdef STRING_SPLASH_LINE2
CENTER_OR_SCROLL(STRING_SPLASH_LINE2, 2000);
#else
safe_delay(2000);
#endif
}
else {
//
// Show the Marlin logo with splash line 1
// After a delay show splash line 2, if it exists
//
#ifdef STRING_SPLASH_LINE2
#define _SPLASH_WAIT_1 1500
#else
#define _SPLASH_WAIT_1 2000
#endif
logo_lines(PSTR(""));
CENTER_OR_SCROLL(STRING_SPLASH_LINE1, _SPLASH_WAIT_1);
#ifdef STRING_SPLASH_LINE2
CENTER_OR_SCROLL(STRING_SPLASH_LINE2, 1500);
#endif
}
#elif defined(STRING_SPLASH_LINE2)
//
// Show splash line 2 only, alongside the logo if possible
//
if (LCD_EXTRA_SPACE >= strlen(STRING_SPLASH_LINE2) + 1) {
logo_lines(PSTR(" " STRING_SPLASH_LINE2));
safe_delay(2000);
}
else {
logo_lines(PSTR(""));
CENTER_OR_SCROLL(STRING_SPLASH_LINE2, 2000);
}
#else
//
// Show only the Marlin logo
//
logo_lines(PSTR(""));
safe_delay(2000);
#endif
lcd.clear();
safe_delay(100);
lcd_set_custom_characters(
#if ENABLED(LCD_PROGRESS_BAR)
false
#endif
);
}
#endif // SHOW_BOOTSCREEN
void lcd_kill_screen() {
lcd.setCursor(0, 0);
lcd_print(lcd_status_message);
#if LCD_HEIGHT < 4
lcd.setCursor(0, 2);
#else
lcd.setCursor(0, 2);
lcd_printPGM(PSTR(MSG_HALTED));
lcd.setCursor(0, 3);
#endif
lcd_printPGM(PSTR(MSG_PLEASE_RESET));
}
FORCE_INLINE void _draw_axis_label(const AxisEnum axis, const char* const pstr, const bool blink) {
if (blink)
lcd_printPGM(pstr);
else {
if (!axis_homed[axis])
lcd.print('?');
else {
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
if (!axis_known_position[axis])
lcd.print(' ');
else
#endif
lcd_printPGM(pstr);
}
}
}
FORCE_INLINE void _draw_heater_status(const int8_t heater, const char prefix, const bool blink) {
const bool isBed = heater < 0;
const float t1 = (isBed ? thermalManager.degBed() : thermalManager.degHotend(heater));
const float t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater));
if (prefix >= 0) lcd.print(prefix);
lcd.print(itostr3(t1 + 0.5));
lcd.print('/');
#if ENABLED(ADVANCED_PAUSE_FEATURE)
const bool is_idle = (!isBed ? thermalManager.is_heater_idle(heater) :
#if HAS_TEMP_BED
thermalManager.is_bed_idle()
#else
false
#endif
);
if (!blink && is_idle) {
lcd.print(' ');
if (t2 >= 10) lcd.print(' ');
if (t2 >= 100) lcd.print(' ');
}
else
#endif
lcd.print(itostr3left(t2 + 0.5));
if (prefix >= 0) {
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
if (t2 < 10) lcd.print(' ');
}
}
#if ENABLED(LCD_PROGRESS_BAR)
inline void lcd_draw_progress_bar(const uint8_t percent) {
int tix = (int)(percent * (LCD_WIDTH) * 3) / 100,
cel = tix / 3, rem = tix % 3, i = LCD_WIDTH;
char msg[LCD_WIDTH + 1], b = ' ';
msg[i] = '\0';
while (i--) {
if (i == cel - 1)
b = LCD_STR_PROGRESS[2];
else if (i == cel && rem != 0)
b = LCD_STR_PROGRESS[rem - 1];
msg[i] = b;
}
lcd.print(msg);
}
#endif // LCD_PROGRESS_BAR
/**
Possible status screens:
16x2 |000/000 B000/000|
|0123456789012345|
16x4 |000/000 B000/000|
|SD100% Z 000.00|
|F100% T--:--|
|0123456789012345|
20x2 |T000/000D B000/000D |
|01234567890123456789|
20x4 |T000/000D B000/000D |
|X 000 Y 000 Z 000.00|
|F100% SD100% T--:--|
|01234567890123456789|
20x4 |T000/000D B000/000D |
|T000/000D Z 000.00|
|F100% SD100% T--:--|
|01234567890123456789|
*/
static void lcd_implementation_status_screen() {
bool blink = lcd_blink();
//
// Line 1
//
lcd.setCursor(0, 0);
#if LCD_WIDTH < 20
//
// Hotend 0 Temperature
//
_draw_heater_status(0, -1, blink);
//
// Hotend 1 or Bed Temperature
//
#if HOTENDS > 1 || TEMP_SENSOR_BED != 0
lcd.setCursor(8, 0);
#if HOTENDS > 1
lcd.print(LCD_STR_THERMOMETER[0]);
_draw_heater_status(1, -1, blink);
#else
lcd.print(LCD_STR_BEDTEMP[0]);
_draw_heater_status(-1, -1, blink);
#endif
#endif // HOTENDS > 1 || TEMP_SENSOR_BED != 0
#else // LCD_WIDTH >= 20
//
// Hotend 0 Temperature
//
_draw_heater_status(0, LCD_STR_THERMOMETER[0], blink);
//
// Hotend 1 or Bed Temperature
//
#if HOTENDS > 1 || TEMP_SENSOR_BED != 0
lcd.setCursor(10, 0);
#if HOTENDS > 1
_draw_heater_status(1, LCD_STR_THERMOMETER[0], blink);
#else
_draw_heater_status(-1, LCD_STR_BEDTEMP[0], blink);
#endif
#endif // HOTENDS > 1 || TEMP_SENSOR_BED != 0
#endif // LCD_WIDTH >= 20
//
// Line 2
//
#if LCD_HEIGHT > 2
#if LCD_WIDTH < 20
#if ENABLED(SDSUPPORT)
lcd.setCursor(0, 2);
lcd_printPGM(PSTR("SD"));
if (IS_SD_PRINTING)
lcd.print(itostr3(card.percentDone()));
else
lcd_printPGM(PSTR("---"));
lcd.print('%');
#endif // SDSUPPORT
#else // LCD_WIDTH >= 20
lcd.setCursor(0, 1);
#if HOTENDS > 1 && TEMP_SENSOR_BED != 0
// If we both have a 2nd extruder and a heated bed,
// show the heated bed temp on the left,
// since the first line is filled with extruder temps
_draw_heater_status(-1, LCD_STR_BEDTEMP[0], blink);
#else
// Before homing the axis letters are blinking 'X' <-> '?'.
// When axis is homed but axis_known_position is false the axis letters are blinking 'X' <-> ' '.
// When everything is ok you see a constant 'X'.
_draw_axis_label(X_AXIS, PSTR(MSG_X), blink);
lcd.print(ftostr4sign(current_position[X_AXIS]));
lcd.print(' ');
_draw_axis_label(Y_AXIS, PSTR(MSG_Y), blink);
lcd.print(ftostr4sign(current_position[Y_AXIS]));
#endif // HOTENDS > 1 || TEMP_SENSOR_BED != 0
#endif // LCD_WIDTH >= 20
lcd.setCursor(LCD_WIDTH - 8, 1);
_draw_axis_label(Z_AXIS, PSTR(MSG_Z), blink);
lcd.print(ftostr52sp(FIXFLOAT(current_position[Z_AXIS])));
#endif // LCD_HEIGHT > 2
//
// Line 3
//
#if LCD_HEIGHT > 3
lcd.setCursor(0, 2);
lcd.print(LCD_STR_FEEDRATE[0]);
lcd.print(itostr3(feedrate_percentage));
lcd.print('%');
#if LCD_WIDTH >= 20 && ENABLED(SDSUPPORT)
lcd.setCursor(7, 2);
lcd_printPGM(PSTR("SD"));
if (IS_SD_PRINTING)
lcd.print(itostr3(card.percentDone()));
else
lcd_printPGM(PSTR("---"));
lcd.print('%');
#endif // LCD_WIDTH >= 20 && SDSUPPORT
char buffer[10];
duration_t elapsed = print_job_timer.duration();
uint8_t len = elapsed.toDigital(buffer);
lcd.setCursor(LCD_WIDTH - len - 1, 2);
lcd.print(LCD_STR_CLOCK[0]);
lcd_print(buffer);
#endif // LCD_HEIGHT > 3
//
// Last Line
// Status Message (which may be a Progress Bar or Filament display)
//
lcd.setCursor(0, LCD_HEIGHT - 1);
#if ENABLED(LCD_PROGRESS_BAR)
// Draw the progress bar if the message has shown long enough
// or if there is no message set.
if (card.isFileOpen() && (ELAPSED(millis(), progress_bar_ms + PROGRESS_BAR_MSG_TIME) || !lcd_status_message[0]))
return lcd_draw_progress_bar(card.percentDone());
#elif ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
// Show Filament Diameter and Volumetric Multiplier %
// After allowing lcd_status_message to show for 5 seconds
if (ELAPSED(millis(), previous_lcd_status_ms + 5000UL)) {
lcd_printPGM(PSTR("Dia "));
lcd.print(ftostr12ns(filament_width_meas));
lcd_printPGM(PSTR(" V"));
lcd.print(itostr3(100.0 * volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]));
lcd.print('%');
return;
}
#endif // FILAMENT_LCD_DISPLAY && SDSUPPORT
const char *str = lcd_status_message;
uint8_t i = LCD_WIDTH;
char c;
while (i-- && (c = *str++)) lcd_print(c);
}
#if ENABLED(ULTIPANEL)
#if ENABLED(ADVANCED_PAUSE_FEATURE)
static void lcd_implementation_hotend_status(const uint8_t row) {
if (row < LCD_HEIGHT) {
lcd.setCursor(LCD_WIDTH - 9, row);
lcd.print(LCD_STR_THERMOMETER[0]);
lcd.print(itostr3(thermalManager.degHotend(active_extruder)));
lcd.print('/');
lcd.print(itostr3(thermalManager.degTargetHotend(active_extruder)));
}
}
#endif // ADVANCED_PAUSE_FEATURE
static void lcd_implementation_drawmenu_static(const uint8_t row, const char* pstr, const bool center=true, const bool invert=false, const char *valstr=NULL) {
UNUSED(invert);
char c;
int8_t n = LCD_WIDTH;
lcd.setCursor(0, row);
if (center && !valstr) {
int8_t pad = (LCD_WIDTH - lcd_strlen_P(pstr)) / 2;
while (--pad >= 0) { lcd.print(' '); n--; }
}
while (n > 0 && (c = pgm_read_byte(pstr))) {
n -= charset_mapper(c);
pstr++;
}
if (valstr) while (n > 0 && (c = *valstr)) {
n -= charset_mapper(c);
valstr++;
}
while (n-- > 0) lcd.print(' ');
}
static void lcd_implementation_drawmenu_generic(const bool sel, const uint8_t row, const char* pstr, const char pre_char, const char post_char) {
char c;
uint8_t n = LCD_WIDTH - 2;
lcd.setCursor(0, row);
lcd.print(sel ? pre_char : ' ');
while ((c = pgm_read_byte(pstr)) && n > 0) {
n -= charset_mapper(c);
pstr++;
}
while (n--) lcd.print(' ');
lcd.print(post_char);
}
static void lcd_implementation_drawmenu_setting_edit_generic(const bool sel, const uint8_t row, const char* pstr, const char pre_char, const char* const data) {
char c;
uint8_t n = LCD_WIDTH - 2 - lcd_strlen(data);
lcd.setCursor(0, row);
lcd.print(sel ? pre_char : ' ');
while ((c = pgm_read_byte(pstr)) && n > 0) {
n -= charset_mapper(c);
pstr++;
}
lcd.print(':');
while (n--) lcd.print(' ');
lcd_print(data);
}
static void lcd_implementation_drawmenu_setting_edit_generic_P(const bool sel, const uint8_t row, const char* pstr, const char pre_char, const char* const data) {
char c;
uint8_t n = LCD_WIDTH - 2 - lcd_strlen_P(data);
lcd.setCursor(0, row);
lcd.print(sel ? pre_char : ' ');
while ((c = pgm_read_byte(pstr)) && n > 0) {
n -= charset_mapper(c);
pstr++;
}
lcd.print(':');
while (n--) lcd.print(' ');
lcd_printPGM(data);
}
#define DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(_type, _name, _strFunc) \
inline void lcd_implementation_drawmenu_setting_edit_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \
lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _strFunc(*(data))); \
} \
inline void lcd_implementation_drawmenu_setting_edit_callback_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \
lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _strFunc(*(data))); \
} \
inline void lcd_implementation_drawmenu_setting_edit_accessor_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type (*pget)(), void (*pset)(_type), ...) { \
lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _strFunc(pget())); \
} \
typedef void _name##_void
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int, int3, itostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float32, ftostr32);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float43, ftostr43sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float5, ftostr5rj);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52sign);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj);
DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(unsigned long, long5, ftostr5rj);
#define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_accessor_bool(sel, row, pstr, pstr2, pget, pset, callback) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
void lcd_implementation_drawedit(const char* pstr, const char* const value=NULL) {
lcd.setCursor(1, 1);
lcd_printPGM(pstr);
if (value != NULL) {
lcd.print(':');
lcd.setCursor(LCD_WIDTH - lcd_strlen(value), 1);
lcd_print(value);
}
}
#if ENABLED(SDSUPPORT)
static void lcd_implementation_drawmenu_sd(const bool sel, const uint8_t row, const char* const pstr, const char* filename, char* const longFilename, const uint8_t concat, const char post_char) {
UNUSED(pstr);
char c;
uint8_t n = LCD_WIDTH - concat;
lcd.setCursor(0, row);
lcd.print(sel ? '>' : ' ');
if (longFilename[0]) {
filename = longFilename;
longFilename[n] = '\0';
}
while ((c = *filename) && n > 0) {
n -= charset_mapper(c);
filename++;
}
while (n--) lcd.print(' ');
lcd.print(post_char);
}
static void lcd_implementation_drawmenu_sdfile(const bool sel, const uint8_t row, const char* pstr, const char* filename, char* const longFilename) {
lcd_implementation_drawmenu_sd(sel, row, pstr, filename, longFilename, 2, ' ');
}
static void lcd_implementation_drawmenu_sddirectory(const bool sel, const uint8_t row, const char* pstr, const char* filename, char* const longFilename) {
lcd_implementation_drawmenu_sd(sel, row, pstr, filename, longFilename, 2, LCD_STR_FOLDER[0]);
}
#endif // SDSUPPORT
#define lcd_implementation_drawmenu_back(sel, row, pstr, dummy) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
#define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
#define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ')
#if ENABLED(LCD_HAS_SLOW_BUTTONS)
extern millis_t next_button_update_ms;
static uint8_t lcd_implementation_read_slow_buttons() {
#if ENABLED(LCD_I2C_TYPE_MCP23017)
// Reading these buttons this is likely to be too slow to call inside interrupt context
// so they are called during normal lcd_update
uint8_t slow_bits = lcd.readButtons() << B_I2C_BTN_OFFSET;
#if ENABLED(LCD_I2C_VIKI)
if ((slow_bits & (B_MI | B_RI)) && PENDING(millis(), next_button_update_ms)) // LCD clicked
slow_bits &= ~(B_MI | B_RI); // Disable LCD clicked buttons if screen is updated
#endif // LCD_I2C_VIKI
return slow_bits;
#endif // LCD_I2C_TYPE_MCP23017
}
#endif // LCD_HAS_SLOW_BUTTONS
#endif // ULTIPANEL
#if ENABLED(LCD_HAS_STATUS_INDICATORS)
static void lcd_implementation_update_indicators() {
// Set the LEDS - referred to as backlights by the LiquidTWI2 library
static uint8_t ledsprev = 0;
uint8_t leds = 0;
if (thermalManager.degTargetBed() > 0) leds |= LED_A;
if (thermalManager.degTargetHotend(0) > 0) leds |= LED_B;
#if FAN_COUNT > 0
if (0
#if HAS_FAN0
|| fanSpeeds[0]
#endif
#if HAS_FAN1
|| fanSpeeds[1]
#endif
#if HAS_FAN2
|| fanSpeeds[2]
#endif
) leds |= LED_C;
#endif // FAN_COUNT > 0
#if HOTENDS > 1
if (thermalManager.degTargetHotend(1) > 0) leds |= LED_C;
#endif
if (leds != ledsprev) {
lcd.setBacklight(leds);
ledsprev = leds;
}
}
#endif // LCD_HAS_STATUS_INDICATORS
#endif // ULTRALCD_IMPL_HD44780_H