You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
879 B
879 B
SMT Component Solder HOWTO
This is a work in progress and subject to change
Items needed
- PCB
- Component(s) to be added
- PCB cradle
- Solder paste
- No clean flux
- Cotton swabs
- Soldering Iron
- Tweezers
Procedure
-
Secure the PCB into the cradle.
-
Apply solder paste to the PCB.
-
Using tweezers, place the component into position on the PCB.
-
Using the heat pen, melt the paste onto the component. The paste should conform onto the copper leads on the PCB.
-
Repeat for all components.
If there is a bridge between two leads and melting it with the heat pen doesn’t solve the problem, then continue.
-
Using a cotton swab, apply a coat of no clean flux to the solder bridge.
-
Heat up the soldering iron to 420 C. Press the iron onto the solder bridge to melt it. This should break the bridge.
-
Repeat for other bridges.