You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/gray_studio/hb85/readme.md

61 lines
1.9 KiB

# Gray Studio HB85
![Gray Studio HB85](https://i.imgur.com/Sk3cupR.jpg)
A HitBit MSX Computer inspired Keyboard.
Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury)
Hardware Supported: Gray Studio HB85
Hardware Availability: Group buy finished
Make example for this keyboard (after setting up your build environment):
make hb85:default
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
ps2avrGB keyboard firmware
==========================
This keyboard uses the port of the QMK firmware for boards that are based on the
ps2avrGB firmware.
Note that this is a complete replacement for the firmware, so you won't be
using Bootmapper Client to change any keyboard settings, since not all the
USB report options are supported.
## Installing
First, install the requirements. These commands are for OSX, but all you
need is the AVR toolchain and `bootloadHID` for flashing:
```
$ brew cask install crosspack-avr
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
$ pip install pyusb
```
Then, with the keyboard plugged in, simply run this command from the
`qmk_firmware` directory:
```
$ make hb85
$ bootloadHID -r hb85_default.hex
```
## Setting the board to bootloader mode
Hold the F3 key while plugging the USB cable.
## Troubleshooting
From my experience, it's really hard to brick these boards. But these
tricks have been useful when it got stuck in a weird scenario.
1. Try plugging the board in while holding the bootloader key. This will force
it to boot only the bootloader without loading the firmware. Once this is
done, just reflash the board with the original firmware.
2. Sometimes USB hubs can act weird, so try connecting the board directly
to your computer or plugging/unplugging the USB hub.