You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/sol/keymaps/default/keymap.c

326 lines
15 KiB

#include QMK_KEYBOARD_H
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
_QWERTY = 0,
_COLEMAK,
_FN,
_ADJ
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
FN,
ADJ,
BACKLIT,
RGBRST
};
enum macro_keycodes {
KC_SAMPLEMACRO,
};
#define FN_ESC LT(_FN, KC_ESC)
#define FN_CAPS LT(_FN, KC_CAPS)
// Define your non-alpha grouping in this define's LAYOUT, and all your BASE_LAYERS will share the same mod/macro columns
/* Base Layout
* ,------------------------------------------------. ,------------------------------------------------.
* | GESC | | | | | | - | | = | | | | | | BkSp |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | Tab | | | | | | [ | | ] | | | | | | \ |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* |FN(CAPS)| | | | | | ( | | ) | | | | | | ' |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* |Shift | | | | | | { | | } | | | | | |Shift |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------'
* | Space| DEL | | Enter| Space|
* `-------------' `-------------'
*/
#define BASE_LAYOUT( \
_00, _01, _02, _03, _04, _05, _06, _07, _08, _09, \
_10, _11, _12, _13, _14, _15, _16, _17, _18, _19, \
_20, _21, _22, _23, _24, _25, _26, _27, _28, _29 \
) \
LAYOUT( \
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
KC_TAB, _00, _01, _02, _03, _04, KC_LBRC, KC_RBRC, _05, _06, _07, _08, _09, KC_BSLS, \
FN_CAPS, _10, _11, _12, _13, _14, KC_LPRN, KC_RPRN, _15, _16, _17, _18, _19, KC_QUOT, \
KC_LSFT, _20, _21, _22, _23, _24, KC_LCBR, KC_RCBR, _25, _26, _27, _28, _29, KC_ENT, \
KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJ, KC_SPC, KC_DEL, KC_ENT, KC_SPC, FN, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, \
KC_VOLU, KC_VOLD, KC_SPC, KC_DEL, KC_ENT, KC_SPC, KC_VOLU, KC_VOLD \
)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,------------------------------------------------. ,------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | | Q | W | E | R | T | | | | Y | U | I | O | P | |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | | A | S | D | F | G | | | | H | J | K | L | ; | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | Z | X | C | V | B | | | | N | M | , | . | / | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | |
* `------+------+------+------+------+------+------| |------+------+------+------+------+------+------'
* | | | | | |
* `-------------' `--------=----'
*/
[_QWERTY] = BASE_LAYOUT( \
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH \
),
/* Colemak
* ,------------------------------------------------. ,------------------------------------------------.
* | | | | | | | | | | | | | | | |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | | Q | W | F | P | G | | | | J | L | U | Y | ; | |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | | A | R | S | T | D | | | | H | N | E | I | O | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | Z | X | C | V | B | | | | K | M | , | . | / | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | |
* `------+------+------+------+------+------+------| |------+------+------+------+------+------+------'
* | | | | | |
* `-------------' `--------=----'
*/
[_COLEMAK] = BASE_LAYOUT( \
KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, \
KC_A, KC_R, KC_S, KC_T, KC_G, KC_K, KC_N, KC_E, KC_I, KC_O, \
KC_Z, KC_X, KC_C, KC_D, KC_V, KC_M, KC_H, KC_COMM, KC_DOT, KC_SLSH \
),
/* FN
* ,------------------------------------------------. ,------------------------------------------------.
* | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | | PGDN | UP | PGUP | | | | | | | PGDN | UP | PGUP | PRINT| HOME |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | | LEFT | DOWN | RIGHT| | | | | | | LEFT | DOWN | RIGHT|INSERT| END |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | |RGBMOD| | | | | | | PLAY | NEXT | MUTE | VOL- | VOL+ |
* `------+------+------+------+------+------+------| |------+------+------+------+------+------+------'
* | | | | | |
* `-------------' `-------------'
*/
[_FN] = LAYOUT( \
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_PSCR, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
_______, KC_PGDN, KC_UP, KC_PGUP, _______, _______, _______, _______, _______, KC_PGDN, KC_UP, KC_PGUP, KC_PSCR, KC_HOME, \
_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \
KC_VOLU, KC_VOLD, _______, _______, _______, _______, KC_VOLU, KC_VOLD \
),
/* ADJ
* ,------------------------------------------------. ,------------------------------------------------.
* | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | | SAD | VAI | SAI | RESET| | | | | | | | | | |
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
* | | HUD | VAD | HUI |RGBRST| | | | | |QWERTY|COLEMK| | | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | | | | | | | | | |RGBTOG| HUI | SAI | VAI |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | |RGBMOD(| | | | | | | |RGBRMOD| HUD | SAD | VAD |
* `------+------+------+------+------+------+------| |------+------+------+------+------+------+------'
* | | | | | |
* `-------------' `-------------'
*/
[_ADJ] = LAYOUT( \
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
_______, RGB_SAD, RGB_VAI, RGB_SAI, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, RGB_HUD, RGB_VAD, RGB_HUI, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
_______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \
KC_VOLU, KC_VOLD, _______, _______, _______, _______, KC_VOLU, KC_VOLD \
)
};
// define variables for reactive RGB
bool TOG_STATUS = false;
int RGB_current_mode;
// Setting ADJ layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(RGB_current_mode);
#endif
layer_on(layer3);
} else {
layer_off(layer3);
}
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
//uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case COLEMAK:
if(record->event.pressed) {
set_single_persistent_default_layer(_COLEMAK);
}
return false;
break;
case FN:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(15);
#endif
}
layer_on(_FN);
} else {
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
#endif
layer_off(_FN);
TOG_STATUS = false;
}
return false;
break;
case ADJ:
if (record->event.pressed) {
layer_on(_ADJ);
} else {
layer_off(_ADJ);
}
return false;
break;
//led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
}
// OLED Driver Logic
#ifdef OLED_DRIVER_ENABLE
uint8_t oled_init_user(uint8_t rotation) {
if (!has_usb())
return OLED_ROTATION_180; // flip 180 for offhand
return rotation;
}
static void render_logo(void) {
static const char PROGMEM sol_logo[] = {
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
oled_write_P(sol_logo, false);
}
//assign the right code to your layers for OLED display
#define L_BASE 0
#define L_FN (1<<_FN)
#define L_ADJ (1<<_ADJ)
#define L_ADJ_TRI (L_ADJ|L_FN)
static void render_status(void) {
// Render to mode icon
static const char PROGMEM mode_logo[4][4] = {
{0x95,0x96,0x0a,0},
{0xb5,0xb6,0x0a,0},
{0x97,0x98,0x0a,0},
{0xb7,0xb8,0x0a,0} };
if (keymap_config.swap_lalt_lgui != false) {
oled_write_P(mode_logo[0], false);
oled_write_P(mode_logo[1], false);
} else {
oled_write_P(mode_logo[2], false);
oled_write_P(mode_logo[3], false);
}
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
oled_write_P(PSTR("Layer: "), false);
switch (layer_state) {
case L_BASE:
oled_write_P(PSTR("Default\n"), false);
break;
case L_FN:
oled_write_P(PSTR("FN \n"), false);
break;
case L_ADJ:
case L_ADJ_TRI:
oled_write_P(PSTR("ADJ \n"), false);
break;
default:
oled_write_P(PSTR("UNDEF \n"), false);
}
// Host Keyboard LED Status
uint8_t led_usb_state = host_keyboard_leds();
oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLOCK ") : PSTR(" "), false);
oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPS ") : PSTR(" "), false);
oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCLK ") : PSTR(" "), false);
}
void oled_task_user(void) {
if (is_master)
render_status();
else
render_logo();
}
#endif