You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/Projects/Webserver/Webserver.c

299 lines
9.0 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the Webserver project. This file contains the main tasks of
* the project and is responsible for the initial application hardware configuration.
*/
#include "Webserver.h"
/** LUFA RNDIS Class driver interface configuration and state information. This structure is
* passed to all RNDIS Class driver functions, so that multiple instances of the same class
* within a device can be differentiated from one another.
*/
USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface =
{
.Config =
{
.DataINPipeNumber = 1,
.DataINPipeDoubleBank = false,
.DataOUTPipeNumber = 2,
.DataOUTPipeDoubleBank = false,
.NotificationPipeNumber = 3,
.NotificationPipeDoubleBank = false,
.HostMaxPacketSize = UIP_CONF_BUFFER_SIZE,
},
};
/** Connection timer, to retain the time elapsed since the last time the uIP connections were managed. */
struct timer ConnectionTimer;
/** ARP timer, to retain the time elapsed since the ARP cache was last updated. */
struct timer ARPTimer;
/** Main program entry point. This routine configures the hardware required by the application, then
* enters a loop to run the application tasks in sequence.
*/
int main(void)
{
SetupHardware();
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
switch (USB_HostState)
{
case HOST_STATE_Addressed:
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
uint16_t ConfigDescriptorSize;
uint8_t ConfigDescriptorData[512];
if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
{
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (RNDIS_Host_ConfigurePipes(&Ethernet_RNDIS_Interface,
ConfigDescriptorSize, ConfigDescriptorData) != RNDIS_ENUMERROR_NoError)
{
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
{
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (RNDIS_Host_InitializeDevice(&Ethernet_RNDIS_Interface) != HOST_SENDCONTROL_Successful)
{
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
uint32_t PacketFilter = (REMOTE_NDIS_PACKET_DIRECTED | REMOTE_NDIS_PACKET_BROADCAST);
if (RNDIS_Host_SetRNDISProperty(&Ethernet_RNDIS_Interface, OID_GEN_CURRENT_PACKET_FILTER,
&PacketFilter, sizeof(PacketFilter)) != HOST_SENDCONTROL_Successful)
{
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
struct uip_eth_addr MACAddress;
if (RNDIS_Host_QueryRNDISProperty(&Ethernet_RNDIS_Interface, OID_802_3_CURRENT_ADDRESS,
&MACAddress, sizeof(MACAddress)) != HOST_SENDCONTROL_Successful)
{
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
uip_setethaddr(MACAddress);
LEDs_SetAllLEDs(LEDMASK_USB_READY);
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
ProcessIncommingPacket();
ManageConnections();
break;
}
RNDIS_Host_USBTask(&Ethernet_RNDIS_Interface);
USB_USBTask();
}
}
void ProcessIncommingPacket(void)
{
if (RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface))
{
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
/* Read the incomming packet straight into the UIP packet buffer */
RNDIS_Host_ReadPacket(&Ethernet_RNDIS_Interface, &uip_buf[0], &uip_len);
if (uip_len > 0)
{
bool PacketHandled = true;
struct uip_eth_hdr* EthernetHeader = (struct uip_eth_hdr*)&uip_buf[0];
if (EthernetHeader->type == HTONS(UIP_ETHTYPE_IP))
{
/* Filter packet by MAC destination */
uip_arp_ipin();
/* Process incomming packet */
uip_input();
/* Add destination MAC to outgoing packet */
if (uip_len > 0)
uip_arp_out();
}
else if (EthernetHeader->type == HTONS(UIP_ETHTYPE_ARP))
{
/* Process ARP packet */
uip_arp_arpin();
}
else
{
PacketHandled = false;
}
/* If a response was generated, send it */
if ((uip_len > 0) && PacketHandled)
RNDIS_Host_SendPacket(&Ethernet_RNDIS_Interface, &uip_buf[0], uip_len);
}
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
}
void ManageConnections(void)
{
/* Manage open connections */
if (timer_expired(&ConnectionTimer))
{
timer_reset(&ConnectionTimer);
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
for (uint8_t i = 0; i < UIP_CONNS; i++)
{
/* Run periodic connection management for each connection */
uip_periodic(i);
/* If a response was generated, send it */
if (uip_len > 0)
RNDIS_Host_SendPacket(&Ethernet_RNDIS_Interface, &uip_buf[0], uip_len);
}
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/* Manage ARP cache refreshing */
if (timer_expired(&ARPTimer))
{
timer_reset(&ARPTimer);
uip_arp_timer();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
LEDs_Init();
USB_Init();
/* uIP Timing Initialization */
clock_init();
timer_set(&ConnectionTimer, CLOCK_SECOND / 2);
timer_set(&ARPTimer, CLOCK_SECOND * 10);
/* uIP Stack Initialization */
uip_init();
uip_ipaddr_t IPAddress, Netmask, GatewayIPAddress;
uip_ipaddr(&IPAddress, DEVICE_IP_ADDRESS[0], DEVICE_IP_ADDRESS[1], DEVICE_IP_ADDRESS[2], DEVICE_IP_ADDRESS[3]);
uip_ipaddr(&Netmask, DEVICE_NETMASK[0], DEVICE_NETMASK[1], DEVICE_NETMASK[2], DEVICE_NETMASK[3]);
uip_ipaddr(&GatewayIPAddress, DEVICE_GATEWAY[0], DEVICE_GATEWAY[1], DEVICE_GATEWAY[2], DEVICE_GATEWAY[3]);
uip_sethostaddr(&IPAddress);
uip_setnetmask(&Netmask);
uip_setdraddr(&GatewayIPAddress);
/* HTTP Webserver Initialization */
WebserverApp_Init();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_Host_DeviceAttached(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_Host_DeviceUnattached(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}