You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/LUFA/Drivers/USB/Class/Device/MassStorage.h

178 lines
8.5 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief Device mode driver for the library USB Mass Storage Class driver.
*
* Device mode driver for the library USB Mass Storage Class driver.
*
* \note This file should not be included directly. It is automatically included as needed by the USB module driver
* dispatch header located in LUFA/Drivers/USB.h.
*/
/** \ingroup Group_USBClassMS
* @defgroup Group_USBClassMSDevice Mass Storage Class Device Mode Driver
*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
* - LUFA/Drivers/USB/Class/Device/MassStorage.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
*
* \section Module Description
* Device Mode USB Class driver framework interface, for the Mass Storage USB Class driver.
*
* @{
*/
#ifndef _MS_CLASS_DEVICE_H_
#define _MS_CLASS_DEVICE_H_
/* Includes: */
#include "../../USB.h"
#include "../Common/MassStorage.h"
#include <string.h>
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_MS_DRIVER)
#error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
#endif
#if defined(__INCLUDE_FROM_MASSSTORAGE_DEVICE_C) && defined(NO_STREAM_CALLBACKS)
#error The NO_STREAM_CALLBACKS compile time option cannot be used in projects using the library Class drivers.
#endif
/* Public Interface - May be used in end-application: */
/* Type Defines: */
/** \brief Mass Storage Class Device Mode Configuration and State Structure.
*
* Class state structure. An instance of this structure should be made for each Mass Storage interface
* within the user application, and passed to each of the Mass Storage class driver functions as the
* MSInterfaceInfo parameter. This stores each Mass Storage interface's configuration and state information.
*/
typedef struct
{
const struct
{
uint8_t InterfaceNumber; /**< Interface number of the Mass Storage interface within the device. */
uint8_t DataINEndpointNumber; /**< Endpoint number of the Mass Storage interface's IN data endpoint. */
uint16_t DataINEndpointSize; /**< Size in bytes of the Mass Storage interface's IN data endpoint. */
bool DataINEndpointDoubleBank; /**< Indicates if the Mass Storage interface's IN data endpoint should use double banking. */
uint8_t DataOUTEndpointNumber; /**< Endpoint number of the Mass Storage interface's OUT data endpoint. */
uint16_t DataOUTEndpointSize; /**< Size in bytes of the Mass Storage interface's OUT data endpoint. */
bool DataOUTEndpointDoubleBank; /**< Indicates if the Mass Storage interface's OUT data endpoint should use double banking. */
uint8_t TotalLUNs; /**< Total number of logical drives in the Mass Storage interface. */
} Config; /**< Config data for the USB class interface within the device. All elements in this section
* <b>must</b> be set or the interface will fail to enumerate and operate correctly.
*/
struct
{
MS_CommandBlockWrapper_t CommandBlock; /**< Mass Storage class command block structure, stores the received SCSI
* command from the host which is to be processed.
*/
MS_CommandStatusWrapper_t CommandStatus; /**< Mass Storage class command status structure, set elements to indicate
* the issued command's success or failure to the host.
*/
volatile bool IsMassStoreReset; /**< Flag indicating that the host has requested that the Mass Storage interface be reset
* and that all current Mass Storage operations should immediately abort.
*/
} State; /**< State data for the USB class interface within the device. All elements in this section
* are reset to their defaults when the interface is enumerated.
*/
} USB_ClassInfo_MS_Device_t;
/* Function Prototypes: */
/** Configures the endpoints of a given Mass Storage interface, ready for use. This should be linked to the library
* \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration
* containing the given Mass Storage interface is selected.
*
* \note The endpoint index numbers as given in the interface's configuration structure must not overlap with any other
* interface, or endpoint bank corruption will occur. Gaps in the allocated endpoint numbers or non-sequential indexes
* within a single interface is allowed, but no two interfaces of any type have have interleaved endpoint indexes.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
*
* \return Boolean true if the endpoints were successfully configured, false otherwise.
*/
bool MS_Device_ConfigureEndpoints(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/** Processes incoming control requests from the host, that are directed to the given Mass Storage class interface. This should be
* linked to the library \ref EVENT_USB_Device_ControlRequest() event.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
*/
void MS_Device_ProcessControlRequest(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/** General management task for a given Mass Storage class interface, required for the correct operation of the interface. This should
* be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage configuration and state.
*/
void MS_Device_USBTask(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/** Mass Storage class driver callback for the user processing of a received SCSI command. This callback will fire each time the
* host sends a SCSI command which requires processing by the user application. Inside this callback the user is responsible
* for the processing of the received SCSI command from the host. The SCSI command is available in the CommandBlock structure
* inside the Mass Storage class state structure passed as a parameter to the callback function.
*
* \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
*
* \return Boolean true if the SCSI command was successfully processed, false otherwise.
*/
bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Function Prototypes: */
#if defined(__INCLUDE_FROM_MASSSTORAGE_DEVICE_C)
static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
static uint8_t StreamCallback_MS_Device_AbortOnMassStoreReset(void);
#endif
#endif
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif
/** @} */