You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h

156 lines
5.1 KiB

/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief TWI peripheral driver for the U7, U6 and U4 USB AVRs.
*
* Master mode TWI driver for the AT90USB1287, AT90USB1286, AT90USB647, AT90USB646, ATMEGA16U4 and ATMEGA32U4 AVRs.
*
* \note This file should not be included directly. It is automatically included as needed by the TWI driver
* dispatch header located in LUFA/Drivers/Peripheral/TWI.h.
*/
/** \ingroup Group_TWI
* @defgroup Group_TWI_AVRU4U6U7 Series U4, U6 and U7 Model TWI Driver
*
* Master mode TWI driver for the AT90USB1287, AT90USB1286, AT90USB647, AT90USB646, ATMEGA16U4 and ATMEGA32U4 AVRs.
*
* \note This file should not be included directly. It is automatically included as needed by the TWI driver
* dispatch header located in LUFA/Drivers/Peripheral/TWI.h.
*
* @{
*/
#ifndef __TWI_AVRU4U6U7_H__
#define __TWI_AVRU4U6U7_H__
/* Includes: */
#include "../../../Common/Common.h"
#include <avr/io.h>
#include <stdbool.h>
#include <util/twi.h>
#include <util/delay.h>
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_TWI_H)
#error Do not include this file directly. Include LUFA/Drivers/Peripheral/TWI.h instead.
#endif
/* Public Interface - May be used in end-application: */
/* Inline Functions: */
/** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be
* before any other TWI operations.
*/
static inline void TWI_Init(void) ATTR_ALWAYS_INLINE;
static inline void TWI_Init(void)
{
TWCR |= (1 << TWEN);
}
/** Turns off the TWI driver hardware. If this is called, any further TWI operations will require a call to
* \ref TWI_Init() before the TWI can be used again.
*/
static inline void TWI_ShutDown(void) ATTR_ALWAYS_INLINE;
static inline void TWI_ShutDown(void)
{
TWCR &= ~(1 << TWEN);
}
/** Sends a TWI STOP onto the TWI bus, terminating communication with the currently addressed device. */
static inline void TWI_StopTransmission(void) ATTR_ALWAYS_INLINE;
static inline void TWI_StopTransmission(void)
{
TWCR = ((1 << TWINT) | (1 << TWSTO) | (1 << TWEN));
}
/** Sends a byte to the currently addressed device on the TWI bus.
*
* \param[in] Byte Byte to send to the currently addressed device
*
* \return Boolean true if the recipient ACKed the byte, false otherwise
*/
static inline bool TWI_SendByte(const uint8_t Byte)
{
TWDR = Byte;
TWCR = ((1 << TWINT) | (1 << TWEN));
while (!(TWCR & (1 << TWINT)));
return ((TWSR & TW_STATUS_MASK) == TW_MT_DATA_ACK);
}
/** Receives a byte from the currently addressed device on the TWI bus.
*
* \param[in] Byte Location where the read byte is to be stored
* \param[in] LastByte Indicates if the byte should be ACKed if false, NAKed if true
*
* \return Boolean true if the byte reception successfully completed, false otherwise
*/
static inline bool TWI_ReceiveByte(uint8_t* const Byte,
const bool LastByte)
{
uint8_t TWCRMask = ((1 << TWINT) | (1 << TWEN));
if (!(LastByte))
TWCRMask |= (1 << TWEA);
TWCR = TWCRMask;
while (!(TWCR & (1 << TWINT)));
*Byte = TWDR;
return ((TWSR & TW_STATUS_MASK) == TW_MR_DATA_ACK);
}
/* Function Prototypes: */
/** Begins a master mode TWI bus communication with the given slave device address.
*
* \param[in] SlaveAddress Address of the slave TWI device to communicate with
* \param[in] TimeoutMS Timeout period within which the slave must respond, in milliseconds
*
* \return Boolean true if the device is ready for data, false otherwise
*/
bool TWI_StartTransmission(const uint8_t SlaveAddress,
const uint8_t TimeoutMS);
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif
/** @} */