qmk_firmware/Bootloaders/Printer/asf.xml

<asf xmlversion="1.0">
	<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
		<require idref="lufa.bootloaders.printer"/>
		<require idref="lufa.boards.dummy.avr8"/>
		<generator value="as5_8"/>

		<device-support value="at90usb1287"/>
		<config name="lufa.drivers.board.name" value="none"/>

		<config name="config.compiler.optimization.level" value="size"/>

		<build type="define" name="F_CPU" value="16000000UL"/>
		<build type="define" name="F_USB" value="16000000UL"/>

		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
	</project>

	<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
		<require idref="lufa.bootloaders.printer"/>
		<require idref="lufa.boards.dummy.avr8"/>
		<generator value="as5_8"/>

		<device-support value="at90usb647"/>
		<config name="lufa.drivers.board.name" value="none"/>

		<config name="config.compiler.optimization.level" value="size"/>

		<build type="define" name="F_CPU" value="16000000UL"/>
		<build type="define" name="F_USB" value="16000000UL"/>

		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
	</project>

	<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
		<require idref="lufa.bootloaders.printer"/>
		<require idref="lufa.boards.dummy.avr8"/>
		<generator value="as5_8"/>

		<device-support value="atmega32u4"/>
		<config name="lufa.drivers.board.name" value="none"/>

		<config name="config.compiler.optimization.level" value="size"/>

		<build type="define" name="F_CPU" value="16000000UL"/>
		<build type="define" name="F_USB" value="16000000UL"/>

		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
	</project>

	<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
		<require idref="lufa.bootloaders.printer"/>
		<require idref="lufa.boards.dummy.avr8"/>
		<generator value="as5_8"/>

		<device-support value="atmega16u2"/>
		<config name="lufa.drivers.board.name" value="none"/>

		<config name="config.compiler.optimization.level" value="size"/>

		<build type="define" name="F_CPU" value="16000000UL"/>
		<build type="define" name="F_USB" value="16000000UL"/>

		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
	</project>

	<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
		<require idref="lufa.bootloaders.printer"/>
		<require idref="lufa.boards.dummy.avr8"/>
		<generator value="as5_8"/>

		<device-support value="atmega8u2"/>
		<config name="lufa.drivers.board.name" value="none"/>

		<config name="config.compiler.optimization.level" value="size"/>

		<build type="define" name="F_CPU" value="16000000UL"/>
		<build type="define" name="F_USB" value="16000000UL"/>

		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>

		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
	</project>

	<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
		<info type="description" value="summary">
		Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
		</info>

 		<info type="gui-flag" value="move-to-root"/>

		<info type="keyword" value="Technology">
			<keyword value="Bootloaders"/>
			<keyword value="USB Device"/>
		</info>

		<device-support-alias value="lufa_avr8"/>
		<device-support-alias value="lufa_xmega"/>
		<device-support-alias value="lufa_uc3"/>

		<build type="include-path" value="."/>
		<build type="c-source" value="BootloaderPrinter.c"/>
		<build type="header-file" value="BootloaderPrinter.h"/>
		<build type="c-source" value="Descriptors.c"/>
		<build type="header-file" value="Descriptors.h"/>
		<build type="c-source" value="BootloaderAPI.c"/>
		<build type="header-file" value="BootloaderAPI.h"/>
		<build type="asm-source" value="BootloaderAPITable.S"/>

		<build type="module-config" subtype="path" value="Config"/>
		<build type="header-file" value="Config/LUFAConfig.h"/>

		<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>

		<require idref="lufa.common"/>
		<require idref="lufa.platform"/>
		<require idref="lufa.drivers.usb"/>
		<require idref="lufa.drivers.board"/>
		<require idref="lufa.drivers.board.leds"/>
	</module>
</asf>