You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/lets_split/ssd1306.c

469 lines
11 KiB

#include "config.h"
#include "i2c.h"
#include <stdbool.h>
#include <string.h>
#include <stdio.h>
#include "print.h"
#include "lets_split.h"
#include "common/glcdfont.c"
#ifdef ADAFRUIT_BLE_ENABLE
#include "adafruit_ble.h"
#endif
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#endif
#include "sendchar.h"
#include "pincontrol.h"
//assign the right code to your layers
#define _BASE 0
#define _LOWER 8
#define _RAISE 16
#define _FNLAYER 64
#define _NUMLAY 128
#define _NLOWER 136
#define _NFNLAYER 192
#define _MOUSECURSOR 256
#define _ADJUST 65560
// Set this to 1 to help diagnose early startup problems
// when testing power-on with ble. Turn it off otherwise,
// as the latency of printing most of the debug info messes
// with the matrix scan, causing keys to drop.
#define DEBUG_TO_SCREEN 0
// Controls the SSD1306 128x32 OLED display via i2c
#define i2cAddress 0x3C
#define DisplayHeight 32
#define DisplayWidth 128
#define FontHeight 8
#define FontWidth 6
#define MatrixRows (DisplayHeight / FontHeight)
#define MatrixCols (DisplayWidth / FontWidth)
struct CharacterMatrix {
uint8_t display[MatrixRows][MatrixCols];
uint8_t *cursor;
bool dirty;
};
static struct CharacterMatrix display;
//static uint16_t last_battery_update;
//static uint32_t vbat;
//#define BatteryUpdateInterval 10000 /* milliseconds */
#define ScreenOffInterval 300000 /* milliseconds */
#if DEBUG_TO_SCREEN
static uint8_t displaying;
#endif
static uint16_t last_flush;
enum ssd1306_cmds {
DisplayOff = 0xAE,
DisplayOn = 0xAF,
SetContrast = 0x81,
DisplayAllOnResume = 0xA4,
DisplayAllOn = 0xA5,
NormalDisplay = 0xA6,
InvertDisplay = 0xA7,
SetDisplayOffset = 0xD3,
SetComPins = 0xda,
SetVComDetect = 0xdb,
SetDisplayClockDiv = 0xD5,
SetPreCharge = 0xd9,
SetMultiPlex = 0xa8,
SetLowColumn = 0x00,
SetHighColumn = 0x10,
SetStartLine = 0x40,
SetMemoryMode = 0x20,
ColumnAddr = 0x21,
PageAddr = 0x22,
ComScanInc = 0xc0,
ComScanDec = 0xc8,
SegRemap = 0xa0,
SetChargePump = 0x8d,
ExternalVcc = 0x01,
SwitchCapVcc = 0x02,
ActivateScroll = 0x2f,
DeActivateScroll = 0x2e,
SetVerticalScrollArea = 0xa3,
RightHorizontalScroll = 0x26,
LeftHorizontalScroll = 0x27,
VerticalAndRightHorizontalScroll = 0x29,
VerticalAndLeftHorizontalScroll = 0x2a,
};
// Write command sequence.
// Returns true on success.
static inline bool _send_cmd1(uint8_t cmd) {
bool res = false;
if (i2c_start_write(i2cAddress)) {
xprintf("failed to start write to %d\n", i2cAddress);
goto done;
}
if (i2c_master_write(0x0 /* command byte follows */)) {
print("failed to write control byte\n");
goto done;
}
if (i2c_master_write(cmd)) {
xprintf("failed to write command %d\n", cmd);
goto done;
}
res = true;
done:
i2c_master_stop();
return res;
}
// Write 2-byte command sequence.
// Returns true on success
static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
if (!_send_cmd1(cmd)) {
return false;
}
return _send_cmd1(opr);
}
// Write 3-byte command sequence.
// Returns true on success
static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
if (!_send_cmd1(cmd)) {
return false;
}
if (!_send_cmd1(opr1)) {
return false;
}
return _send_cmd1(opr2);
}
#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
static void matrix_clear(struct CharacterMatrix *matrix);
static void clear_display(void) {
matrix_clear(&display);
// Clear all of the display bits (there can be random noise
// in the RAM on startup)
send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
if (i2c_start_write(i2cAddress)) {
goto done;
}
if (i2c_master_write(0x40)) {
// Data mode
goto done;
}
for (uint8_t row = 0; row < MatrixRows; ++row) {
for (uint8_t col = 0; col < DisplayWidth; ++col) {
i2c_master_write(0);
}
}
display.dirty = false;
done:
i2c_master_stop();
}
#if DEBUG_TO_SCREEN
#undef sendchar
static int8_t capture_sendchar(uint8_t c) {
sendchar(c);
iota_gfx_write_char(c);
if (!displaying) {
iota_gfx_flush();
}
return 0;
}
#endif
bool iota_gfx_init(void) {
bool success = false;
send_cmd1(DisplayOff);
send_cmd2(SetDisplayClockDiv, 0x80);
send_cmd2(SetMultiPlex, DisplayHeight - 1);
send_cmd2(SetDisplayOffset, 0);
send_cmd1(SetStartLine | 0x0);
send_cmd2(SetChargePump, 0x14 /* Enable */);
send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
/// Flips the display orientation 0 degrees
send_cmd1(SegRemap | 0x1);
send_cmd1(ComScanDec);
/*
// the following Flip the display orientation 180 degrees
send_cmd1(SegRemap);
send_cmd1(ComScanInc);
*/end flip
send_cmd2(SetComPins, 0x2);
send_cmd2(SetContrast, 0x8f);
send_cmd2(SetPreCharge, 0xf1);
send_cmd2(SetVComDetect, 0x40);
send_cmd1(DisplayAllOnResume);
send_cmd1(NormalDisplay);
send_cmd1(DeActivateScroll);
send_cmd1(DisplayOn);
send_cmd2(SetContrast, 0); // Dim
clear_display();
success = true;
iota_gfx_flush();
#if DEBUG_TO_SCREEN
print_set_sendchar(capture_sendchar);
#endif
done:
return success;
}
bool iota_gfx_off(void) {
bool success = false;
send_cmd1(DisplayOff);
success = true;
done:
return success;
}
bool iota_gfx_on(void) {
bool success = false;
send_cmd1(DisplayOn);
success = true;
done:
return success;
}
static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
*matrix->cursor = c;
++matrix->cursor;
if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
// We went off the end; scroll the display upwards by one line
memmove(&matrix->display[0], &matrix->display[1],
MatrixCols * (MatrixRows - 1));
matrix->cursor = &matrix->display[MatrixRows - 1][0];
memset(matrix->cursor, ' ', MatrixCols);
}
}
static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
matrix->dirty = true;
if (c == '\n') {
// Clear to end of line from the cursor and then move to the
// start of the next line
uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
while (cursor_col++ < MatrixCols) {
matrix_write_char_inner(matrix, ' ');
}
return;
}
matrix_write_char_inner(matrix, c);
}
void iota_gfx_write_char(uint8_t c) {
matrix_write_char(&display, c);
}
static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
const char *end = data + strlen(data);
while (data < end) {
matrix_write_char(matrix, *data);
++data;
}
}
void iota_gfx_write(const char *data) {
matrix_write(&display, data);
}
static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
while (true) {
uint8_t c = pgm_read_byte(data);
if (c == 0) {
return;
}
matrix_write_char(matrix, c);
++data;
}
}
void iota_gfx_write_P(const char *data) {
matrix_write_P(&display, data);
}
static void matrix_clear(struct CharacterMatrix *matrix) {
memset(matrix->display, ' ', sizeof(matrix->display));
matrix->cursor = &matrix->display[0][0];
matrix->dirty = true;
}
void iota_gfx_clear_screen(void) {
matrix_clear(&display);
}
static void matrix_render(struct CharacterMatrix *matrix) {
last_flush = timer_read();
iota_gfx_on();
#if DEBUG_TO_SCREEN
++displaying;
#endif
// Move to the home position
send_cmd3(PageAddr, 0, MatrixRows - 1);
send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
if (i2c_start_write(i2cAddress)) {
goto done;
}
if (i2c_master_write(0x40)) {
// Data mode
goto done;
}
for (uint8_t row = 0; row < MatrixRows; ++row) {
for (uint8_t col = 0; col < MatrixCols; ++col) {
const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
uint8_t colBits = pgm_read_byte(glyph + glyphCol);
i2c_master_write(colBits);
}
// 1 column of space between chars (it's not included in the glyph)
i2c_master_write(0);
}
}
matrix->dirty = false;
done:
i2c_master_stop();
#if DEBUG_TO_SCREEN
--displaying;
#endif
}
void iota_gfx_flush(void) {
matrix_render(&display);
}
static void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
static void render_status_info(void) {
#if DEBUG_TO_SCREEN
if (debug_enable) {
return;
}
#endif
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_write_P(&matrix, PSTR("USB: "));
#ifdef PROTOCOL_LUFA
switch (USB_DeviceState) {
case DEVICE_STATE_Unattached:
matrix_write_P(&matrix, PSTR("Unattached"));
break;
case DEVICE_STATE_Suspended:
matrix_write_P(&matrix, PSTR("Suspended"));
break;
case DEVICE_STATE_Configured:
matrix_write_P(&matrix, PSTR("Connected"));
break;
case DEVICE_STATE_Powered:
matrix_write_P(&matrix, PSTR("Powered"));
break;
case DEVICE_STATE_Default:
matrix_write_P(&matrix, PSTR("Default"));
break;
case DEVICE_STATE_Addressed:
matrix_write_P(&matrix, PSTR("Addressed"));
break;
default:
matrix_write_P(&matrix, PSTR("Invalid"));
}
#endif
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
char buf[40];
snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
matrix_write_P(&matrix, PSTR("\n\nLayer: "));
switch (layer_state) {
case _BASE:
matrix_write_P(&matrix, PSTR("Default"));
break;
case _RAISE:
matrix_write_P(&matrix, PSTR("Raise"));
break;
case _LOWER:
matrix_write_P(&matrix, PSTR("Lower"));
break;
case _ADJUST:
matrix_write_P(&matrix, PSTR("ADJUST"));
break;
default:
matrix_write(&matrix, buf);
}
// Host Keyboard LED Status
char led[40];
snprintf(led, sizeof(led), "\n%s %s %s",
(host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
(host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
(host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
matrix_write(&matrix, led);
matrix_update(&display, &matrix);
}
void iota_gfx_task(void) {
render_status_info();
if (display.dirty) {
iota_gfx_flush();
}
if (timer_elapsed(last_flush) > ScreenOffInterval) {
iota_gfx_off();
}
}