qmk_firmware/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c

/*
             LUFA Library
     Copyright (C) Dean Camera, 2009.
              
  dean [at] fourwalledcubicle [dot] com
      www.fourwalledcubicle.com
*/

/*
  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

  Permission to use, copy, modify, and distribute this software
  and its documentation for any purpose and without fee is hereby
  granted, provided that the above copyright notice appear in all
  copies and that both that the copyright notice and this
  permission notice and warranty disclaimer appear in supporting
  documentation, and that the name of the author not be used in
  advertising or publicity pertaining to distribution of the
  software without specific, written prior permission.

  The author disclaim all warranties with regard to this
  software, including all implied warranties of merchantability
  and fitness.  In no event shall the author be liable for any
  special, indirect or consequential damages or any damages
  whatsoever resulting from loss of use, data or profits, whether
  in an action of contract, negligence or other tortious action,
  arising out of or in connection with the use or performance of
  this software.
*/

/** \file
 *
 *  Main source file for the GenericHIDHost demo. This file contains the main tasks of
 *  the demo and is responsible for the initial application hardware configuration.
 */
 
#include "GenericHIDHost.h"

/** Main program entry point. This routine configures the hardware required by the application, then
 *  starts the scheduler to run the application tasks.
 */
int main(void)
{
	SetupHardware();

	puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
	       "Generic HID Host Demo running.\r\n" ESC_INVERSE_OFF));

	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

	for (;;)
	{
		HID_Host_Task();
		USB_USBTask();
	}
}

/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
	/* Disable watchdog if enabled by bootloader/fuses */
	MCUSR &= ~(1 << WDRF);
	wdt_disable();

	/* Disable clock division */
	clock_prescale_set(clock_div_1);

	/* Hardware Initialization */
	SerialStream_Init(9600, false);
	LEDs_Init();
	USB_Init();
}

/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
 *  starts the library USB task to begin the enumeration and USB management process.
 */
void EVENT_USB_DeviceAttached(void)
{
	puts_P(PSTR("Device Attached.\r\n"));
	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}

/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
 *  stops the library USB task management process.
 */
void EVENT_USB_DeviceUnattached(void)
{
	puts_P(PSTR("Device Unattached.\r\n"));
	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}

/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
 *  enumerated by the host and is now ready to be used by the application.
 */
void EVENT_USB_DeviceEnumerationComplete(void)
{
	LEDs_SetAllLEDs(LEDMASK_USB_READY);
}

/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_HostError(const uint8_t ErrorCode)
{
	USB_ShutDown();

	puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));
	printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);

	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
	for(;;);
}

/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
 *  enumerating an attached USB device.
 */
void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
	puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));
	printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);
	printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);
	printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);

	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}

/** Reads in and processes the next report from the attached device, displaying the report
 *  contents on the board LEDs and via the serial port.
 */
void ReadNextReport(void)
{
	/* Select and unfreeze HID data IN pipe */
	Pipe_SelectPipe(HID_DATA_IN_PIPE);
	Pipe_Unfreeze();

	/* Check to see if a packet has been received */
	if (!(Pipe_IsINReceived()))
	{
		/* Refreeze HID data IN pipe */
		Pipe_Freeze();
			
		return;
	}
	
	/* Ensure pipe contains data before trying to read from it */
	if (Pipe_IsReadWriteAllowed())
	{
		uint8_t ReportINData[Pipe_BytesInPipe()];

		/* Read in HID report data */
		Pipe_Read_Stream_LE(&ReportINData, sizeof(ReportINData));
	
		/* Print report data through the serial port */
		for (uint16_t CurrByte = 0; CurrByte < sizeof(ReportINData); CurrByte++)
		  printf_P(PSTR("0x%02X "), ReportINData[CurrByte]);
		
		puts_P(PSTR("\r\n"));
	}
		
	/* Clear the IN endpoint, ready for next data packet */
	Pipe_ClearIN();
	
	/* Refreeze HID data IN pipe */
	Pipe_Freeze();
}

/** Writes a report to the attached device.
 *
 *  \param ReportOUTData  Buffer containing the report to send to the device
 *  \param ReportIndex  Index of the report in the device (zero if the device does not use multiple reports)
 *  \param ReportType  Type of report to send, either HID_REPORTTYPE_OUTPUT or HID_REPORTTYPE_FEATURE
 *  \param ReportLength  Length of the report to send
 */
void WriteNextReport(uint8_t* ReportOUTData, uint8_t ReportIndex, uint8_t ReportType, uint16_t ReportLength)
{
	/* Select and unfreeze HID data OUT pipe */
	Pipe_SelectPipe(HID_DATA_OUT_PIPE);
	
	/* Not all HID devices have an OUT endpoint (some require OUT reports to be sent over the
	 * control endpoint instead) - check to see if the OUT endpoint has been initialized */
	if (Pipe_IsConfigured())
	{
		Pipe_Unfreeze();

		/* Ensure pipe is ready to be written to before continuing */
		if (!(Pipe_IsOUTReady()))
		{
			/* Refreeze the data OUT pipe */
			Pipe_Freeze();
			
			return;
		}
		
		/* If the report index is used, send it before the report data */
		if (ReportIndex)
		  Pipe_Write_Byte(ReportIndex);

		/* Write out HID report data */
		Pipe_Write_Stream_LE(ReportOUTData, ReportLength);				
			
		/* Clear the OUT endpoint, send last data packet */
		Pipe_ClearOUT();

		/* Refreeze the data OUT pipe */
		Pipe_Freeze();
	}
	else
	{
		/* Class specific request to send a HID report to the device */
		USB_ControlRequest = (USB_Request_Header_t)
			{
				.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
				.bRequest      = REQ_SetReport,
				.wValue        = ((ReportType << 8) | ReportIndex),
				.wIndex        = 0,
				.wLength       = ReportLength,
			};

		/* Select the control pipe for the request transfer */
		Pipe_SelectPipe(PIPE_CONTROLPIPE);

		/* Send the request to the device */
		USB_Host_SendControlRequest(ReportOUTData);
	}
}

/** Task to set the configuration of the attached device after it has been enumerated, and to read and process
 *  HID reports from the device and to send reports if desired.
 */
void HID_Host_Task(void)
{
	uint8_t ErrorCode;

	/* Switch to determine what user-application handled host state the host state machine is in */
	switch (USB_HostState)
	{
		case HOST_STATE_Addressed:
			/* Standard request to set the device configuration to configuration 1 */
			USB_ControlRequest = (USB_Request_Header_t)
				{
					.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
					.bRequest      = REQ_SetConfiguration,
					.wValue        = 1,
					.wIndex        = 0,
					.wLength       = 0,
				};

			/* Select the control pipe for the request transfer */
			Pipe_SelectPipe(PIPE_CONTROLPIPE);

			/* Send the request, display error and wait for device detach if request fails */
			if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
			{
				puts_P(PSTR("Control Error (Set Configuration).\r\n"));
				printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);

				/* Indicate error status */
				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
				
				/* Wait until USB device disconnected */
				while (USB_IsConnected);
				break;
			}
			
			USB_HostState = HOST_STATE_Configured;
			break;
		case HOST_STATE_Configured:
			puts_P(PSTR("Getting Config Data.\r\n"));
		
			/* Get and process the configuration descriptor data */
			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
			{
				if (ErrorCode == ControlError)
				  puts_P(PSTR("Control Error (Get Configuration).\r\n"));
				else
				  puts_P(PSTR("Invalid Device.\r\n"));

				printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
				
				/* Indicate error status */
				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

				/* Wait until USB device disconnected */
				while (USB_IsConnected);
				break;
			}
		
			puts_P(PSTR("HID Device Enumerated.\r\n"));
					
			USB_HostState = HOST_STATE_Ready;
			break;
		case HOST_STATE_Ready:
			ReadNextReport();

			break;
	}
}