qmk_firmware/quantum/config_common.h

/* Copyright 2015-2017 Jack Humbert
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#ifndef CONFIG_DEFINITIONS_H
#define CONFIG_DEFINITIONS_H

/* diode directions */
#define COL2ROW       0
#define ROW2COL       1
#define CUSTOM_MATRIX 2 /* Disables built-in matrix scanning code */

#ifdef __AVR__
    /* I/O pins */
    #ifndef F0
        #define B0 0x30
        #define B1 0x31
        #define B2 0x32
        #define B3 0x33
        #define B4 0x34
        #define B5 0x35
        #define B6 0x36
        #define B7 0x37
        #define C0 0x60
        #define C1 0x61
        #define C2 0x62
        #define C3 0x63
        #define C4 0x64
        #define C5 0x65
        #define C6 0x66
        #define C7 0x67
        #define D0 0x90
        #define D1 0x91
        #define D2 0x92
        #define D3 0x93
        #define D4 0x94
        #define D5 0x95
        #define D6 0x96
        #define D7 0x97
        #define E0 0xC0
        #define E1 0xC1
        #define E2 0xC2
        #define E3 0xC3
        #define E4 0xC4
        #define E5 0xC5
        #define E6 0xC6
        #define E7 0xC7
        #define F0 0xF0
        #define F1 0xF1
        #define F2 0xF2
        #define F3 0xF3
        #define F4 0xF4
        #define F5 0xF5
        #define F6 0xF6
        #define F7 0xF7
        #define A0 0x00
        #define A1 0x01
        #define A2 0x02
        #define A3 0x03
        #define A4 0x04
        #define A5 0x05
        #define A6 0x06
        #define A7 0x07
    #endif
#elif defined(PROTOCOL_CHIBIOS)
    #define A0  PAL_LINE(GPIOA, 0)
    #define A1  PAL_LINE(GPIOA, 1)
    #define A2  PAL_LINE(GPIOA, 2)
    #define A3  PAL_LINE(GPIOA, 3)
    #define A4  PAL_LINE(GPIOA, 4)
    #define A5  PAL_LINE(GPIOA, 5)
    #define A6  PAL_LINE(GPIOA, 6)
    #define A7  PAL_LINE(GPIOA, 7)
    #define A8  PAL_LINE(GPIOA, 8)
    #define A9  PAL_LINE(GPIOA, 9)
    #define A10 PAL_LINE(GPIOA, 10)
    #define A11 PAL_LINE(GPIOA, 11)
    #define A12 PAL_LINE(GPIOA, 12)
    #define A13 PAL_LINE(GPIOA, 13)
    #define A14 PAL_LINE(GPIOA, 14)
    #define A15 PAL_LINE(GPIOA, 15)
    #define B0  PAL_LINE(GPIOB, 0)
    #define B1  PAL_LINE(GPIOB, 1)
    #define B2  PAL_LINE(GPIOB, 2)
    #define B3  PAL_LINE(GPIOB, 3)
    #define B4  PAL_LINE(GPIOB, 4)
    #define B5  PAL_LINE(GPIOB, 5)
    #define B6  PAL_LINE(GPIOB, 6)
    #define B7  PAL_LINE(GPIOB, 7)
    #define B8  PAL_LINE(GPIOB, 8)
    #define B9  PAL_LINE(GPIOB, 9)
    #define B10 PAL_LINE(GPIOB, 10)
    #define B11 PAL_LINE(GPIOB, 11)
    #define B12 PAL_LINE(GPIOB, 12)
    #define B13 PAL_LINE(GPIOB, 13)
    #define B14 PAL_LINE(GPIOB, 14)
    #define B15 PAL_LINE(GPIOB, 15)
    #define C0  PAL_LINE(GPIOC, 0)
    #define C1  PAL_LINE(GPIOC, 1)
    #define C2  PAL_LINE(GPIOC, 2)
    #define C3  PAL_LINE(GPIOC, 3)
    #define C4  PAL_LINE(GPIOC, 4)
    #define C5  PAL_LINE(GPIOC, 5)
    #define C6  PAL_LINE(GPIOC, 6)
    #define C7  PAL_LINE(GPIOC, 7)
    #define C8  PAL_LINE(GPIOC, 8)
    #define C9  PAL_LINE(GPIOC, 9)
    #define C10 PAL_LINE(GPIOC, 10)
    #define C11 PAL_LINE(GPIOC, 11)
    #define C12 PAL_LINE(GPIOC, 12)
    #define C13 PAL_LINE(GPIOC, 13)
    #define C14 PAL_LINE(GPIOC, 14)
    #define C15 PAL_LINE(GPIOC, 15)
    #define D0  PAL_LINE(GPIOD, 0)
    #define D1  PAL_LINE(GPIOD, 1)
    #define D2  PAL_LINE(GPIOD, 2)
    #define D3  PAL_LINE(GPIOD, 3)
    #define D4  PAL_LINE(GPIOD, 4)
    #define D5  PAL_LINE(GPIOD, 5)
    #define D6  PAL_LINE(GPIOD, 6)
    #define D7  PAL_LINE(GPIOD, 7)
    #define D8  PAL_LINE(GPIOD, 8)
    #define D9  PAL_LINE(GPIOD, 9)
    #define D10 PAL_LINE(GPIOD, 10)
    #define D11 PAL_LINE(GPIOD, 11)
    #define D12 PAL_LINE(GPIOD, 12)
    #define D13 PAL_LINE(GPIOD, 13)
    #define D14 PAL_LINE(GPIOD, 14)
    #define D15 PAL_LINE(GPIOD, 15)
    #define E0  PAL_LINE(GPIOE, 0)
    #define E1  PAL_LINE(GPIOE, 1)
    #define E2  PAL_LINE(GPIOE, 2)
    #define E3  PAL_LINE(GPIOE, 3)
    #define E4  PAL_LINE(GPIOE, 4)
    #define E5  PAL_LINE(GPIOE, 5)
    #define E6  PAL_LINE(GPIOE, 6)
    #define E7  PAL_LINE(GPIOE, 7)
    #define E8  PAL_LINE(GPIOE, 8)
    #define E9  PAL_LINE(GPIOE, 9)
    #define E10 PAL_LINE(GPIOE, 10)
    #define E11 PAL_LINE(GPIOE, 11)
    #define E12 PAL_LINE(GPIOE, 12)
    #define E13 PAL_LINE(GPIOE, 13)
    #define E14 PAL_LINE(GPIOE, 14)
    #define E15 PAL_LINE(GPIOE, 15)
    #define F0  PAL_LINE(GPIOF, 0)
    #define F1  PAL_LINE(GPIOF, 1)
    #define F2  PAL_LINE(GPIOF, 2)
    #define F3  PAL_LINE(GPIOF, 3)
    #define F4  PAL_LINE(GPIOF, 4)
    #define F5  PAL_LINE(GPIOF, 5)
    #define F6  PAL_LINE(GPIOF, 6)
    #define F7  PAL_LINE(GPIOF, 7)
    #define F8  PAL_LINE(GPIOF, 8)
    #define F9  PAL_LINE(GPIOF, 9)
    #define F10 PAL_LINE(GPIOF, 10)
    #define F11 PAL_LINE(GPIOF, 11)
    #define F12 PAL_LINE(GPIOF, 12)
    #define F13 PAL_LINE(GPIOF, 13)
    #define F14 PAL_LINE(GPIOF, 14)
    #define F15 PAL_LINE(GPIOF, 15)
#endif

/* USART configuration */
#ifdef BLUETOOTH_ENABLE
#   ifdef __AVR_ATmega32U4__
#      define SERIAL_UART_BAUD 9600
#      define SERIAL_UART_DATA UDR1
#      define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
#      define SERIAL_UART_RXD_VECT USART1_RX_vect
#      define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
#      define SERIAL_UART_INIT() do { \
            /* baud rate */ \
            UBRR1L = SERIAL_UART_UBRR; \
            /* baud rate */ \
            UBRR1H = SERIAL_UART_UBRR >> 8; \
            /* enable TX */ \
            UCSR1B = _BV(TXEN1); \
            /* 8-bit data */ \
            UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
            sei(); \
        } while(0)
#   else
#       error "USART configuration is needed."
#   endif
#endif

#define API_SYSEX_MAX_SIZE 32

#include "song_list.h"

#endif
Clarify the quantum license (#1042) * Clarify the license for files we have signoff on * Update against the currently signed off files * Remove unused and not clearly licensed headers * Replace an #endif I accidentally removed while resolving merge conflicts 9 years ago			`/* Copyright 2015-2017 Jack Humbert`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 2 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*/`

added ergodox 10 years ago			`#ifndef CONFIG_DEFINITIONS_H`
			`#define CONFIG_DEFINITIONS_H`

Optimize matrix scanning (#343) 10 years ago			`/* diode directions */`
Add new DIODE_DIRECTION option The previous two options were COL2ROW, ROW2COL; this adds CUSTOM_MATRIX to disable the built-in matrix scanning code. Most notably, this obviates the need to set MATRIX_ROW_PINS or MATRIX_COL_PINS. 9 years ago			`#define COL2ROW 0`
			`#define ROW2COL 1`
			`#define CUSTOM_MATRIX 2 /* Disables built-in matrix scanning code */`

Adds support for Planck Rev 6 (#2666) * initial files for rev 6 with encoder * music map init, dip scan added * adds ws2812 driver for arm * flesh out dip and encoder support * adds default encoder res * adds default encoder res * start muse implementation * muse working with encoder as control * flip direction * try mouse wheel again * dont break other revs * dont break other revs * conditional autio * pwm ws driver (not working) * update build includes for chibios * update ws2812 driver/config * last commit for glasser code * working example * remove rgb for now * finish up rev6 * working encoder keycodes * add warnings to planck keymaps about the LAYOUT 7 years ago			`#ifdef __AVR__`
Update quantum matrix to support both AVR and Chibios ARM (#3968) * Update quantum matrix to support both AVR and Chibios ARM - Addition of STM32 pin definitions - Created abstruction layer defines to control GPIO (This is a bit pointless for Chibios as we are creating a PAL ontop of a PAL but it is necessary for uniformity with AVR) - Modified matrix.c to use the above functions * minor ifdef fix * Rename of functions and docs - Added documentation. - Renamed functions according to Jack's spec. * Massdrop fix * Update matrix.c * Update quantum.h * Update quantum.h * Update quantum.h * Update internals_gpio_control.md 7 years ago			`/* I/O pins */`
			`#ifndef F0`
			`#define B0 0x30`
			`#define B1 0x31`
			`#define B2 0x32`
			`#define B3 0x33`
			`#define B4 0x34`
			`#define B5 0x35`
			`#define B6 0x36`
			`#define B7 0x37`
			`#define C0 0x60`
			`#define C1 0x61`
			`#define C2 0x62`
			`#define C3 0x63`
			`#define C4 0x64`
			`#define C5 0x65`
			`#define C6 0x66`
			`#define C7 0x67`
			`#define D0 0x90`
			`#define D1 0x91`
			`#define D2 0x92`
			`#define D3 0x93`
			`#define D4 0x94`
			`#define D5 0x95`
			`#define D6 0x96`
			`#define D7 0x97`
			`#define E0 0xC0`
			`#define E1 0xC1`
			`#define E2 0xC2`
			`#define E3 0xC3`
			`#define E4 0xC4`
			`#define E5 0xC5`
			`#define E6 0xC6`
			`#define E7 0xC7`
			`#define F0 0xF0`
			`#define F1 0xF1`
			`#define F2 0xF2`
			`#define F3 0xF3`
			`#define F4 0xF4`
			`#define F5 0xF5`
			`#define F6 0xF6`
			`#define F7 0xF7`
			`#define A0 0x00`
			`#define A1 0x01`
			`#define A2 0x02`
			`#define A3 0x03`
			`#define A4 0x04`
			`#define A5 0x05`
			`#define A6 0x06`
			`#define A7 0x07`
			`#endif`
			`#elif defined(PROTOCOL_CHIBIOS)`
			`#define A0 PAL_LINE(GPIOA, 0)`
			`#define A1 PAL_LINE(GPIOA, 1)`
			`#define A2 PAL_LINE(GPIOA, 2)`
			`#define A3 PAL_LINE(GPIOA, 3)`
			`#define A4 PAL_LINE(GPIOA, 4)`
			`#define A5 PAL_LINE(GPIOA, 5)`
			`#define A6 PAL_LINE(GPIOA, 6)`
			`#define A7 PAL_LINE(GPIOA, 7)`
			`#define A8 PAL_LINE(GPIOA, 8)`
			`#define A9 PAL_LINE(GPIOA, 9)`
			`#define A10 PAL_LINE(GPIOA, 10)`
			`#define A11 PAL_LINE(GPIOA, 11)`
			`#define A12 PAL_LINE(GPIOA, 12)`
			`#define A13 PAL_LINE(GPIOA, 13)`
			`#define A14 PAL_LINE(GPIOA, 14)`
			`#define A15 PAL_LINE(GPIOA, 15)`
			`#define B0 PAL_LINE(GPIOB, 0)`
			`#define B1 PAL_LINE(GPIOB, 1)`
			`#define B2 PAL_LINE(GPIOB, 2)`
			`#define B3 PAL_LINE(GPIOB, 3)`
			`#define B4 PAL_LINE(GPIOB, 4)`
			`#define B5 PAL_LINE(GPIOB, 5)`
			`#define B6 PAL_LINE(GPIOB, 6)`
			`#define B7 PAL_LINE(GPIOB, 7)`
			`#define B8 PAL_LINE(GPIOB, 8)`
			`#define B9 PAL_LINE(GPIOB, 9)`
			`#define B10 PAL_LINE(GPIOB, 10)`
			`#define B11 PAL_LINE(GPIOB, 11)`
			`#define B12 PAL_LINE(GPIOB, 12)`
			`#define B13 PAL_LINE(GPIOB, 13)`
			`#define B14 PAL_LINE(GPIOB, 14)`
			`#define B15 PAL_LINE(GPIOB, 15)`
			`#define C0 PAL_LINE(GPIOC, 0)`
			`#define C1 PAL_LINE(GPIOC, 1)`
			`#define C2 PAL_LINE(GPIOC, 2)`
			`#define C3 PAL_LINE(GPIOC, 3)`
			`#define C4 PAL_LINE(GPIOC, 4)`
			`#define C5 PAL_LINE(GPIOC, 5)`
			`#define C6 PAL_LINE(GPIOC, 6)`
			`#define C7 PAL_LINE(GPIOC, 7)`
			`#define C8 PAL_LINE(GPIOC, 8)`
			`#define C9 PAL_LINE(GPIOC, 9)`
			`#define C10 PAL_LINE(GPIOC, 10)`
			`#define C11 PAL_LINE(GPIOC, 11)`
			`#define C12 PAL_LINE(GPIOC, 12)`
			`#define C13 PAL_LINE(GPIOC, 13)`
			`#define C14 PAL_LINE(GPIOC, 14)`
			`#define C15 PAL_LINE(GPIOC, 15)`
			`#define D0 PAL_LINE(GPIOD, 0)`
			`#define D1 PAL_LINE(GPIOD, 1)`
			`#define D2 PAL_LINE(GPIOD, 2)`
			`#define D3 PAL_LINE(GPIOD, 3)`
			`#define D4 PAL_LINE(GPIOD, 4)`
			`#define D5 PAL_LINE(GPIOD, 5)`
			`#define D6 PAL_LINE(GPIOD, 6)`
			`#define D7 PAL_LINE(GPIOD, 7)`
			`#define D8 PAL_LINE(GPIOD, 8)`
			`#define D9 PAL_LINE(GPIOD, 9)`
			`#define D10 PAL_LINE(GPIOD, 10)`
			`#define D11 PAL_LINE(GPIOD, 11)`
			`#define D12 PAL_LINE(GPIOD, 12)`
			`#define D13 PAL_LINE(GPIOD, 13)`
			`#define D14 PAL_LINE(GPIOD, 14)`
			`#define D15 PAL_LINE(GPIOD, 15)`
			`#define E0 PAL_LINE(GPIOE, 0)`
			`#define E1 PAL_LINE(GPIOE, 1)`
			`#define E2 PAL_LINE(GPIOE, 2)`
			`#define E3 PAL_LINE(GPIOE, 3)`
			`#define E4 PAL_LINE(GPIOE, 4)`
			`#define E5 PAL_LINE(GPIOE, 5)`
			`#define E6 PAL_LINE(GPIOE, 6)`
			`#define E7 PAL_LINE(GPIOE, 7)`
			`#define E8 PAL_LINE(GPIOE, 8)`
			`#define E9 PAL_LINE(GPIOE, 9)`
			`#define E10 PAL_LINE(GPIOE, 10)`
			`#define E11 PAL_LINE(GPIOE, 11)`
			`#define E12 PAL_LINE(GPIOE, 12)`
			`#define E13 PAL_LINE(GPIOE, 13)`
			`#define E14 PAL_LINE(GPIOE, 14)`
			`#define E15 PAL_LINE(GPIOE, 15)`
			`#define F0 PAL_LINE(GPIOF, 0)`
			`#define F1 PAL_LINE(GPIOF, 1)`
			`#define F2 PAL_LINE(GPIOF, 2)`
			`#define F3 PAL_LINE(GPIOF, 3)`
			`#define F4 PAL_LINE(GPIOF, 4)`
			`#define F5 PAL_LINE(GPIOF, 5)`
			`#define F6 PAL_LINE(GPIOF, 6)`
			`#define F7 PAL_LINE(GPIOF, 7)`
			`#define F8 PAL_LINE(GPIOF, 8)`
			`#define F9 PAL_LINE(GPIOF, 9)`
			`#define F10 PAL_LINE(GPIOF, 10)`
			`#define F11 PAL_LINE(GPIOF, 11)`
			`#define F12 PAL_LINE(GPIOF, 12)`
			`#define F13 PAL_LINE(GPIOF, 13)`
			`#define F14 PAL_LINE(GPIOF, 14)`
			`#define F15 PAL_LINE(GPIOF, 15)`
cleaning up midid 9 years ago			`#endif`
added ergodox 10 years ago
Optimize matrix scanning (#343) 10 years ago			`/* USART configuration */`
added ergodox 10 years ago			`#ifdef BLUETOOTH_ENABLE`
Optimize matrix scanning (#343) 10 years ago			`# ifdef __AVR_ATmega32U4__`
			`# define SERIAL_UART_BAUD 9600`
			`# define SERIAL_UART_DATA UDR1`
			`# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)`
			`# define SERIAL_UART_RXD_VECT USART1_RX_vect`
			`# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))`
			`# define SERIAL_UART_INIT() do { \`
			`/* baud rate */ \`
			`UBRR1L = SERIAL_UART_UBRR; \`
			`/* baud rate */ \`
			`UBRR1H = SERIAL_UART_UBRR >> 8; \`
			`/* enable TX */ \`
			`UCSR1B = _BV(TXEN1); \`
			`/* 8-bit data */ \`
			`UCSR1C = _BV(UCSZ11) \| _BV(UCSZ10); \`
			`sei(); \`
			`} while(0)`
			`# else`
			`# error "USART configuration is needed."`
Added missing endif for ifdef __AVR_ATmega32U4__ and removed the unnecessary one at the end of the file 9 years ago			`# endif`
added ergodox 10 years ago			`#endif`

API Sysex fixes Fix memory leaks by using stack instead of malloc Reduce memory usage by having less temporary bufffers Remove warnings by adding includes Decrease code size by 608 bytes (mostly due to not linking malloc) More robust handling of buffer overflows 9 years ago			`#define API_SYSEX_MAX_SIZE 32`

clean-up planck and preonic keymaps, move audio stuff around 8 years ago			`#include "song_list.h"`

added ergodox 10 years ago			`#endif`