You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/quantum/rgb_matrix.h

122 lines
3.8 KiB

/* Copyright 2017 Jason Williams
* Copyright 2017 Jack Humbert
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef RGB_MATRIX_H
#define RGB_MATRIX_H
#include <stdint.h>
#include <stdbool.h>
#include "color.h"
#include "is31fl3731.h"
#include "quantum.h"
typedef struct
{
HSV color;
uint8_t index;
} zeal_indicator;
typedef struct
{
bool enabled:1; // |
bool use_split_left_shift:1; // |
bool use_split_right_shift:1; // |
bool use_7u_spacebar:1; // |
bool use_iso_enter:1; // |
bool disable_when_usb_suspended:1; // |
bool __pad6:1; // |
bool __pad7:1; // 1 byte
uint8_t disable_after_timeout; // 1 byte
uint8_t brightness; // 1 byte
uint8_t effect; // 1 byte
HSV color_1; // 3 bytes
HSV color_2; // 3 bytes
zeal_indicator caps_lock_indicator; // 4 bytes
zeal_indicator layer_1_indicator; // 4 bytes
zeal_indicator layer_2_indicator; // 4 bytes
zeal_indicator layer_3_indicator; // 4 bytes
uint16_t alphas_mods[5]; // 10 bytes
} rgb_matrix_config; // = 36 bytes
#define EEPROM_BACKLIGHT_CONFIG_ADDR ((void*)35)
// rgb_matrix_config uses 36 bytes
// 35+36=71
#define EEPROM_BACKLIGHT_KEY_COLOR_ADDR ((void*)71)
void backlight_effect_single_LED_test(void);
void backlight_config_set_alphas_mods( uint16_t *value );
void backlight_config_load(void);
void backlight_config_save(void);
void backlight_init_drivers(void);
void backlight_timer_init(void);
void backlight_timer_enable(void);
void backlight_timer_disable(void);
void backlight_set_suspend_state(bool state);
void backlight_set_indicator_state(uint8_t state);
void backlight_rgb_task(void);
// This should not be called from an interrupt
// (eg. from a timer interrupt).
// Call this while idle (in between matrix scans).
// If the buffer is dirty, it will update the driver with the buffer.
void backlight_update_pwm_buffers(void);
void backlight_set_key_hit(uint8_t row, uint8_t col);
void backlight_unset_key_hit(uint8_t row, uint8_t col);
void backlight_effect_increase(void);
void backlight_effect_decrease(void);
void backlight_brightness_increase(void);
void backlight_brightness_decrease(void);
void backlight_color_1_hue_increase(void);
void backlight_color_1_hue_decrease(void);
void backlight_color_1_sat_increase(void);
void backlight_color_1_sat_decrease(void);
void backlight_color_2_hue_increase(void);
void backlight_color_2_hue_decrease(void);
void backlight_color_2_sat_increase(void);
void backlight_color_2_sat_decrease(void);
void *backlight_get_key_color_eeprom_address(uint8_t led);
void backlight_get_key_color( uint8_t led, HSV *hsv );
void backlight_set_key_color( uint8_t row, uint8_t column, HSV hsv );
void backlight_test_led( uint8_t index, bool red, bool green, bool blue );
uint32_t backlight_get_tick(void);
void backlight_debug_led(bool state);
void rgblight_toggle(void);
void rgblight_step(void);
void rgblight_increase_hue(void);
void rgblight_decrease_hue(void);
void rgblight_increase_sat(void);
void rgblight_decrease_sat(void);
void rgblight_increase_val(void);
void rgblight_decrease_val(void);
void rgblight_mode(uint8_t mode);
uint32_t rgblight_get_mode(void);
#endif