You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/hadron/ver2/keymaps/default/keymap.c

423 lines
21 KiB

#include QMK_KEYBOARD_H
#ifdef USE_I2C
#include "i2c.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
extern keymap_config_t keymap_config;
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _COLEMAK 1
#define _DVORAK 2
#define _LOWER 3
#define _RAISE 4
#define _MOUSECURSOR 8
#define _ADJUST 16
enum preonic_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
DVORAK,
LOWER,
RAISE,
BACKLIT,
RGBLED_TOGGLE,
RGBLED_STEP_MODE,
RGBLED_INCREASE_HUE,
RGBLED_DECREASE_HUE,
RGBLED_INCREASE_SAT,
RGBLED_DECREASE_SAT,
RGBLED_INCREASE_VAL,
RGBLED_DECREASE_VAL,
DEMOMACRO
};
// Custom macros
#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl
#define CTL_TTAB CTL_T(KC_TAB) // Tap for Esc, hold for Ctrl
#define CTL_ENT CTL_T(KC_ENT) // Tap for Enter, hold for Ctrl
#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift
// Requires KC_TRNS/_______ for the trigger key in the destination layer
#define LT_MC(kc) LT(_MOUSECURSOR, kc) // L-ayer T-ap M-ouse C-ursor
#define LT_RAI(kc) LT(_RAISE, kc) // L-ayer T-ap to Raise
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,------+------+------+------+------+------------------------------------------------.
* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | DEL |
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
* | Tab | Q | W | E | R | T | 7 | 8 | 9 | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | CAPS | A | S | D | F | G | 4 | 5 | 6 | H | J | K | L | ;/Nav| ' |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | 1 | 2 | 3 | N | M | , | . | / |Ctl/Et|
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right |
* `--------------------------------------------------------------------------------------------------------'
*/
[_QWERTY] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_P7, KC_P8, KC_P9, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_P4, KC_P5, KC_P6, KC_H, KC_J, KC_K, KC_L,LT_MC(KC_SCLN), KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, CTL_ENT, \
KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT,KC_DOWN, KC_UP, KC_RGHT \
),
/* Colemak
* ,------+------+------+------+------+------------------------------------------------.
* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | 0 | - |
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
* | Tab | Q | W | F | P | G | 7 | 8 | 9 | J | L | U | Y | ; | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
* | CAPS | A | R | S | T | D | 4 | 5 | 6 | H | N | E | I | O | ' |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | 1 | 2 | 3 | K | M | , | . | / |Ctl/Et|
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right |
* `--------------------------------------------------------------------------------------------------------'
*/
[_COLEMAK] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_P7, KC_P8, KC_P9, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
KC_LCTRL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_P4, KC_P5, KC_P6, KC_H, KC_N, KC_E, KC_I, LT_MC(KC_O), KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_P1, KC_P2, KC_P3, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, CTL_ENT, \
KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Dvorak
* ,------+------+------+------+------+------------------------------------------------.
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - |
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
* | Tab | " | , | . | P | Y | 7 | 8 | 9 | F | G | C | R | L | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
* | Esc | A | O | E | U | I | 4 | 5 | 6 | D | H | T | N | S | / |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | Shift| ; | Q | J | K | X | 1 | 2 | 3 | B | M | W | V | Z |Ctl/Et|
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | ` | Ctrl | Alt | GUI |Lower |Space | 0 | . | = |Space |Raise | Left | Down | Up |Right |
* `--------------------------------------------------------------------------------------------------------'
*/
[_DVORAK] = LAYOUT(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,\
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_P7, KC_P8, KC_P9, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_P4, KC_P5, KC_P6, KC_D, KC_H, KC_T, KC_N, LT_MC(KC_S), KC_SLSH, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_P1, KC_P2, KC_P3, KC_B, KC_M, KC_W, KC_V, KC_Z, CTL_ENT, \
KC_GRV, KC_LCTRL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_P0, KC_DOT, KC_EQL, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,------+------+------+------+------+------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
* | ~ | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
* | | F1 | F2 | F3 | F4 | F5 | | | | F6 | _ | + | { | } | | |
* |------+------+------+------+------+------|------+------+------+------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | | | | F12 |ISO ~ |ISO | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | Next | Vol- | Vol+ | Play |
* `--------------------------------------------------------------------------------------------------------'
*/
[_LOWER] = LAYOUT(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Raise
* ,------+------+------+------+------+------------------------------------------------.
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - |
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | | | | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | | | | F12 |ISO # |ISO / | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | Next | Vol- | Vol+ | Play |
* `--------------------------------------------------------------------------------------------------------'
*/
[_RAISE] = LAYOUT(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
_______, _______, _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Mouse Layer (semi-col)
* ,------+------+------+------+------+------------------------------------------------.
* | ACCL0| ACCL1| ACCL2| | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
* | | | | | | | | | Home | Wh_Up| WHL_L| M_Up | WHL_R| Macro| |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | End | Wh_Dn| M_Lft| M_Dn | M_Rt | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | BTN2 | BTN3 | BTN4 | BTN5 | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | BTN1 | | | | BTN1 | | | | | |
* `--------------------------------------------------------------------------------------------------------'
*/
[_MOUSECURSOR] = LAYOUT(
KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_WH_L, KC_MS_U, KC_WH_R,DEMOMACRO,_______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_END , KC_PGDN, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN2, KC_BTN3, KC_BTN4, KC_BTN5, _______, _______, \
_______, _______, _______, _______, _______, KC_BTN1, _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______ \
),
/* Adjust (Lower + Raise)
* ,------+------+------+------+------+------------------------------------------------.
* | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - |
* |------+------+------+------+------+------+------+------+------+------+------+------+--------------------.
* | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | |
* `--------------------------------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \
_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______\
)
};
// define variables for reactive RGB
bool RGB_INIT = false;
bool TOG_STATUS = false;
int RGB_current_mode;
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
rgblight_mode(RGB_current_mode);
layer_on(layer3);
} else {
layer_off(layer3);
}
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support (#4462) * add initial support for hadron ver3 * add initial support for hadron ver3 * pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display * initial work on OLED using qwiic driver * early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality * moved oled defines to config.h and added ifndef to micro_oled driver * WORKING :D - note, still work in progress to get the start location correct on the 128x32 display. * added equation to automatically calculate display offset based on screen width * adding time-out timer to oled display * changed read lock staus via read_led_state * lock indications fixes * Added scroll lock indication to oled * add support for DRV2605 haptic driver * Improve readabiity of DRV2605 driver. -added typedef for waveform library -added unions for registers * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Fixes for PR * PR fixes * fix old persistent layer function to use new set_single_persistent_default_layer * fix issues with changing makefile defines that broken per-key haptic pulse * Comment fixes * Add definable parameter and auto-calibration based on motor choice
6 years ago
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support (#4462) * add initial support for hadron ver3 * add initial support for hadron ver3 * pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display * initial work on OLED using qwiic driver * early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality * moved oled defines to config.h and added ifndef to micro_oled driver * WORKING :D - note, still work in progress to get the start location correct on the 128x32 display. * added equation to automatically calculate display offset based on screen width * adding time-out timer to oled display * changed read lock staus via read_led_state * lock indications fixes * Added scroll lock indication to oled * add support for DRV2605 haptic driver * Improve readabiity of DRV2605 driver. -added typedef for waveform library -added unions for registers * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Fixes for PR * PR fixes * fix old persistent layer function to use new set_single_persistent_default_layer * fix issues with changing makefile defines that broken per-key haptic pulse * Comment fixes * Add definable parameter and auto-calibration based on motor choice
6 years ago
set_single_persistent_default_layer(_COLEMAK);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (RGB_INIT) {} else {
RGB_current_mode = rgblight_config.mode;
RGB_INIT = true;
}
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
rgblight_mode(16);
}
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
TOG_STATUS = false;
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (RGB_INIT) {} else {
RGB_current_mode = rgblight_config.mode;
RGB_INIT = true;
}
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
rgblight_mode(15);
}
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
layer_off(_RAISE);
TOG_STATUS = false;
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case BACKLIT:
if (record->event.pressed) {
register_code(KC_RSFT);
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
} else {
unregister_code(KC_RSFT);
}
return false;
break;
case RGB_MOD:
//led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
return false;
break;
case DEMOMACRO:
if (record->event.pressed) {
SEND_STRING("hello world");
}
return false;
break;
}
return true;
}
adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support (#4462) * add initial support for hadron ver3 * add initial support for hadron ver3 * pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display * initial work on OLED using qwiic driver * early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality * moved oled defines to config.h and added ifndef to micro_oled driver * WORKING :D - note, still work in progress to get the start location correct on the 128x32 display. * added equation to automatically calculate display offset based on screen width * adding time-out timer to oled display * changed read lock staus via read_led_state * lock indications fixes * Added scroll lock indication to oled * add support for DRV2605 haptic driver * Improve readabiity of DRV2605 driver. -added typedef for waveform library -added unions for registers * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Fixes for PR * PR fixes * fix old persistent layer function to use new set_single_persistent_default_layer * fix issues with changing makefile defines that broken per-key haptic pulse * Comment fixes * Add definable parameter and auto-calibration based on motor choice
6 years ago
//Functions for ver2
#ifdef KEYBOARD_hadron_ver2
#include "LUFA/Drivers/Peripheral/TWI.h"
void matrix_init_user(void) {
#ifdef USE_I2C
i2c_master_init();
#ifdef SSD1306OLED
// calls code for the SSD1306 OLED
_delay_ms(400);
TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
iota_gfx_init(); // turns on the display
#endif
#endif
#ifdef AUDIO_ENABLE
startup_user();
#endif
}
void matrix_scan_user(void) {
#ifdef SSD1306OLED
iota_gfx_task(); // this is what updates the display continuously
#endif
}
void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
//assign the right code to your layers for OLED display
#define L_BASE 0
#define L_LOWER 8
#define L_RAISE 16
#define L_FNLAYER 64
#define L_NUMLAY 128
#define L_NLOWER 136
#define L_NFNLAYER 192
#define L_MOUSECURSOR 256
#define L_ADJUST 65560
void iota_gfx_task_user(void) {
#if DEBUG_TO_SCREEN
if (debug_enable) {
return;
}
#endif
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_write_P(&matrix, PSTR("USB: "));
#ifdef PROTOCOL_LUFA
switch (USB_DeviceState) {
case DEVICE_STATE_Unattached:
matrix_write_P(&matrix, PSTR("Unattached"));
break;
case DEVICE_STATE_Suspended:
matrix_write_P(&matrix, PSTR("Suspended"));
break;
case DEVICE_STATE_Configured:
matrix_write_P(&matrix, PSTR("Connected"));
break;
case DEVICE_STATE_Powered:
matrix_write_P(&matrix, PSTR("Powered"));
break;
case DEVICE_STATE_Default:
matrix_write_P(&matrix, PSTR("Default"));
break;
case DEVICE_STATE_Addressed:
matrix_write_P(&matrix, PSTR("Addressed"));
break;
default:
matrix_write_P(&matrix, PSTR("Invalid"));
}
#endif
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
char buf[40];
snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
matrix_write_P(&matrix, PSTR("\n\nLayer: "));
switch (layer_state) {
case L_BASE:
matrix_write_P(&matrix, PSTR("Default"));
break;
case L_RAISE:
matrix_write_P(&matrix, PSTR("Raise"));
break;
case L_LOWER:
matrix_write_P(&matrix, PSTR("Lower"));
break;
case L_ADJUST:
matrix_write_P(&matrix, PSTR("ADJUST"));
break;
default:
matrix_write(&matrix, buf);
}
// Host Keyboard LED Status
char led[40];
snprintf(led, sizeof(led), "\n%s %s %s",
(host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
(host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
(host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
matrix_write(&matrix, led);
matrix_update(&display, &matrix);
}
#endif