You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/lets_split/keymaps/mjt/keymap.c

218 lines
10 KiB

Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
8 years ago
#include "lets_split.h"
#include "action_layer.h"
#include "eeconfig.h"
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _COLEMAK 1
#define _DVORAK 2
#define _LOWER 3
#define _RAISE 4
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
DVORAK,
LOWER,
RAISE,
ADJUST,
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | S | D | F | G | H | J | K | L | ; | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
Pull in Upstream (#1) * Various tweaks for some Input:Club build processes * change KEYMAP to LAYOUT for all new keyboards made using this script * Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap * Add Nyquist keymap (#2692) * nyquist * danielhklein nyquist setup * shift left controls * remove readme * cleanup before pr * ready for pr * Adds Phantom TKL support (#2696) * Add an info.json to phantom keyboard * Add layouts - KEYMAP_WINKEYLESS - KEYMAP_7BIT - KEYMAP_ISO - KEYMAP_ISO_WINKEYLESS * Add key_counts * Add 2 missing F-Row keys * Add TKC1800 info.json Created an info.json for the tkc1800. * Clueboard 60 info.json - adds - LAYOUT_60_ansi - LAYOUT_60_iso - KEYMAP_AEK - KEYMAP - LAYOUT_60_ansi_split_bs_rshift * Add the Speedo keyboard * Fix KC60 info.json file (#2707) * change KEYMAP to LAYOUT in all the KC60 files * Redo the info.json file * Small fixes to TKC1800 - adjust F-row to use 0.25 spacing - split left shift - add key_count * Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708) * change diverge 3 KC_KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for handwired arrow pad * change M10A to LAYOUT for m10-a * Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68 * change KC_KEYMAP to LAYOUT for nano * Refactor to LAYOUT * refactor to LAYOUT-ansi and LAYOUT_iso for s65 * LAYOUT conversions for lfkkeyboards * missed a few renames * mini1800 for lfkeyobards support of LAYOUT * Improve state/chord handling and clean up namespace Some values that can never, ever, change were held in local variables, rather than in PROGMEM. Fixed. Change "pressed" to a signed int so the test for < 0 makes sense, and to avoid possible weird failure modes in the case where a key release comes in when pressed is already zero. (Shouldn't happen, sure, but computers are weird.) A lot of things in process_steno had external linkage for no particular reason. They've been marked static. Stuff still builds. Distinguish between currently-held keys and keys that have been held, and expose these values through a nicely-named API so other code could, say, check on the current set of steno chording in order to make displays. Also in passing fix up the "state" value having external linkage so it could clash with other people's variable declarations. The API also provides hooks for key processing and steno chord events, so you can monitor those events without having to run in matrix_scan_user and recheck the values directly. Also document these. There is no path through processing a key that doesn't end with a return false, so the nested return foo() are gone and we just return false. * Pull information from config.h and rules.mk (#2711) * Pull information from config.h and rules.mk * Readd the kbd75 maintainer * Remove obsolete info.json entries (#2712) * Clean up some long-standing errors when populating the API (#2715) * More Configurator Warning Fixes (#2716) * mf68_ble did not have the correct .c and .h files * Fix JC65 KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for s60_x * Convert KEYMAP to LAYOUT for lets_split boards * Convert KEYMAP to LAYOUT * more fixes to keymap for iris * convert KEYMAP to LAYOUT for levinson keyboard * change losinggeneration's KEYMAP to LAYOUT * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for nyquist * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for viterbi * convert KEYMAP to LAYOUT * convert KEYMAP and its subsidiries to the LAYOUT standard * convert KEYMAP and its subsidiries to the new LAYOUT standard * Normacos keymap for let's split keyboard (#2691) * Cheers let's split keymap * fixed typo on norman layer of cheers keymap for let's split * fixed right handed mappings for home row * cheers keymap for let's split redefinition * updated Cheers keymap for let's split * cheers keymap for let's split updated with some terminal macros * renamed cheers let's split keymap to a more appropriate normacos * updated normacos keymap doc / removed non functional keys * reset let's split rules to default values * added more spotlight search macros * normalized keymap comments * Moved numpad on lower layer * hhkb jp personal keymap (#2698) * Add JJ40 Cockpit personal keymap (#2713) * Add JJ40 Cockpit keymap * Fix lower layer symbols * Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718) * add readme to ktype keyboard * add readme to m10a * add readme to mini1800 * add readme to parent directory
7 years ago
[_QWERTY] = LAYOUT( \
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
8 years ago
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Colemak
* ,-----------------------------------------------------------------------------------.
* | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | R | S | T | D | H | N | E | I | O | " |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
Pull in Upstream (#1) * Various tweaks for some Input:Club build processes * change KEYMAP to LAYOUT for all new keyboards made using this script * Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap * Add Nyquist keymap (#2692) * nyquist * danielhklein nyquist setup * shift left controls * remove readme * cleanup before pr * ready for pr * Adds Phantom TKL support (#2696) * Add an info.json to phantom keyboard * Add layouts - KEYMAP_WINKEYLESS - KEYMAP_7BIT - KEYMAP_ISO - KEYMAP_ISO_WINKEYLESS * Add key_counts * Add 2 missing F-Row keys * Add TKC1800 info.json Created an info.json for the tkc1800. * Clueboard 60 info.json - adds - LAYOUT_60_ansi - LAYOUT_60_iso - KEYMAP_AEK - KEYMAP - LAYOUT_60_ansi_split_bs_rshift * Add the Speedo keyboard * Fix KC60 info.json file (#2707) * change KEYMAP to LAYOUT in all the KC60 files * Redo the info.json file * Small fixes to TKC1800 - adjust F-row to use 0.25 spacing - split left shift - add key_count * Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708) * change diverge 3 KC_KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for handwired arrow pad * change M10A to LAYOUT for m10-a * Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68 * change KC_KEYMAP to LAYOUT for nano * Refactor to LAYOUT * refactor to LAYOUT-ansi and LAYOUT_iso for s65 * LAYOUT conversions for lfkkeyboards * missed a few renames * mini1800 for lfkeyobards support of LAYOUT * Improve state/chord handling and clean up namespace Some values that can never, ever, change were held in local variables, rather than in PROGMEM. Fixed. Change "pressed" to a signed int so the test for < 0 makes sense, and to avoid possible weird failure modes in the case where a key release comes in when pressed is already zero. (Shouldn't happen, sure, but computers are weird.) A lot of things in process_steno had external linkage for no particular reason. They've been marked static. Stuff still builds. Distinguish between currently-held keys and keys that have been held, and expose these values through a nicely-named API so other code could, say, check on the current set of steno chording in order to make displays. Also in passing fix up the "state" value having external linkage so it could clash with other people's variable declarations. The API also provides hooks for key processing and steno chord events, so you can monitor those events without having to run in matrix_scan_user and recheck the values directly. Also document these. There is no path through processing a key that doesn't end with a return false, so the nested return foo() are gone and we just return false. * Pull information from config.h and rules.mk (#2711) * Pull information from config.h and rules.mk * Readd the kbd75 maintainer * Remove obsolete info.json entries (#2712) * Clean up some long-standing errors when populating the API (#2715) * More Configurator Warning Fixes (#2716) * mf68_ble did not have the correct .c and .h files * Fix JC65 KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for s60_x * Convert KEYMAP to LAYOUT for lets_split boards * Convert KEYMAP to LAYOUT * more fixes to keymap for iris * convert KEYMAP to LAYOUT for levinson keyboard * change losinggeneration's KEYMAP to LAYOUT * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for nyquist * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for viterbi * convert KEYMAP to LAYOUT * convert KEYMAP and its subsidiries to the LAYOUT standard * convert KEYMAP and its subsidiries to the new LAYOUT standard * Normacos keymap for let's split keyboard (#2691) * Cheers let's split keymap * fixed typo on norman layer of cheers keymap for let's split * fixed right handed mappings for home row * cheers keymap for let's split redefinition * updated Cheers keymap for let's split * cheers keymap for let's split updated with some terminal macros * renamed cheers let's split keymap to a more appropriate normacos * updated normacos keymap doc / removed non functional keys * reset let's split rules to default values * added more spotlight search macros * normalized keymap comments * Moved numpad on lower layer * hhkb jp personal keymap (#2698) * Add JJ40 Cockpit personal keymap (#2713) * Add JJ40 Cockpit keymap * Fix lower layer symbols * Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718) * add readme to ktype keyboard * add readme to m10a * add readme to mini1800 * add readme to parent directory
7 years ago
[_COLEMAK] = LAYOUT( \
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
8 years ago
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Dvorak
* ,-----------------------------------------------------------------------------------.
* | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Esc | A | O | E | U | I | D | H | T | N | S | / |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
* `-----------------------------------------------------------------------------------'
*/
Pull in Upstream (#1) * Various tweaks for some Input:Club build processes * change KEYMAP to LAYOUT for all new keyboards made using this script * Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap * Add Nyquist keymap (#2692) * nyquist * danielhklein nyquist setup * shift left controls * remove readme * cleanup before pr * ready for pr * Adds Phantom TKL support (#2696) * Add an info.json to phantom keyboard * Add layouts - KEYMAP_WINKEYLESS - KEYMAP_7BIT - KEYMAP_ISO - KEYMAP_ISO_WINKEYLESS * Add key_counts * Add 2 missing F-Row keys * Add TKC1800 info.json Created an info.json for the tkc1800. * Clueboard 60 info.json - adds - LAYOUT_60_ansi - LAYOUT_60_iso - KEYMAP_AEK - KEYMAP - LAYOUT_60_ansi_split_bs_rshift * Add the Speedo keyboard * Fix KC60 info.json file (#2707) * change KEYMAP to LAYOUT in all the KC60 files * Redo the info.json file * Small fixes to TKC1800 - adjust F-row to use 0.25 spacing - split left shift - add key_count * Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708) * change diverge 3 KC_KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for handwired arrow pad * change M10A to LAYOUT for m10-a * Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68 * change KC_KEYMAP to LAYOUT for nano * Refactor to LAYOUT * refactor to LAYOUT-ansi and LAYOUT_iso for s65 * LAYOUT conversions for lfkkeyboards * missed a few renames * mini1800 for lfkeyobards support of LAYOUT * Improve state/chord handling and clean up namespace Some values that can never, ever, change were held in local variables, rather than in PROGMEM. Fixed. Change "pressed" to a signed int so the test for < 0 makes sense, and to avoid possible weird failure modes in the case where a key release comes in when pressed is already zero. (Shouldn't happen, sure, but computers are weird.) A lot of things in process_steno had external linkage for no particular reason. They've been marked static. Stuff still builds. Distinguish between currently-held keys and keys that have been held, and expose these values through a nicely-named API so other code could, say, check on the current set of steno chording in order to make displays. Also in passing fix up the "state" value having external linkage so it could clash with other people's variable declarations. The API also provides hooks for key processing and steno chord events, so you can monitor those events without having to run in matrix_scan_user and recheck the values directly. Also document these. There is no path through processing a key that doesn't end with a return false, so the nested return foo() are gone and we just return false. * Pull information from config.h and rules.mk (#2711) * Pull information from config.h and rules.mk * Readd the kbd75 maintainer * Remove obsolete info.json entries (#2712) * Clean up some long-standing errors when populating the API (#2715) * More Configurator Warning Fixes (#2716) * mf68_ble did not have the correct .c and .h files * Fix JC65 KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for s60_x * Convert KEYMAP to LAYOUT for lets_split boards * Convert KEYMAP to LAYOUT * more fixes to keymap for iris * convert KEYMAP to LAYOUT for levinson keyboard * change losinggeneration's KEYMAP to LAYOUT * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for nyquist * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for viterbi * convert KEYMAP to LAYOUT * convert KEYMAP and its subsidiries to the LAYOUT standard * convert KEYMAP and its subsidiries to the new LAYOUT standard * Normacos keymap for let's split keyboard (#2691) * Cheers let's split keymap * fixed typo on norman layer of cheers keymap for let's split * fixed right handed mappings for home row * cheers keymap for let's split redefinition * updated Cheers keymap for let's split * cheers keymap for let's split updated with some terminal macros * renamed cheers let's split keymap to a more appropriate normacos * updated normacos keymap doc / removed non functional keys * reset let's split rules to default values * added more spotlight search macros * normalized keymap comments * Moved numpad on lower layer * hhkb jp personal keymap (#2698) * Add JJ40 Cockpit personal keymap (#2713) * Add JJ40 Cockpit keymap * Fix lower layer symbols * Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718) * add readme to ktype keyboard * add readme to m10a * add readme to mini1800 * add readme to parent directory
7 years ago
[_DVORAK] = LAYOUT( \
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
8 years ago
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,-----------------------------------------------------------------------------------.
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
Pull in Upstream (#1) * Various tweaks for some Input:Club build processes * change KEYMAP to LAYOUT for all new keyboards made using this script * Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap * Add Nyquist keymap (#2692) * nyquist * danielhklein nyquist setup * shift left controls * remove readme * cleanup before pr * ready for pr * Adds Phantom TKL support (#2696) * Add an info.json to phantom keyboard * Add layouts - KEYMAP_WINKEYLESS - KEYMAP_7BIT - KEYMAP_ISO - KEYMAP_ISO_WINKEYLESS * Add key_counts * Add 2 missing F-Row keys * Add TKC1800 info.json Created an info.json for the tkc1800. * Clueboard 60 info.json - adds - LAYOUT_60_ansi - LAYOUT_60_iso - KEYMAP_AEK - KEYMAP - LAYOUT_60_ansi_split_bs_rshift * Add the Speedo keyboard * Fix KC60 info.json file (#2707) * change KEYMAP to LAYOUT in all the KC60 files * Redo the info.json file * Small fixes to TKC1800 - adjust F-row to use 0.25 spacing - split left shift - add key_count * Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708) * change diverge 3 KC_KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for handwired arrow pad * change M10A to LAYOUT for m10-a * Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68 * change KC_KEYMAP to LAYOUT for nano * Refactor to LAYOUT * refactor to LAYOUT-ansi and LAYOUT_iso for s65 * LAYOUT conversions for lfkkeyboards * missed a few renames * mini1800 for lfkeyobards support of LAYOUT * Improve state/chord handling and clean up namespace Some values that can never, ever, change were held in local variables, rather than in PROGMEM. Fixed. Change "pressed" to a signed int so the test for < 0 makes sense, and to avoid possible weird failure modes in the case where a key release comes in when pressed is already zero. (Shouldn't happen, sure, but computers are weird.) A lot of things in process_steno had external linkage for no particular reason. They've been marked static. Stuff still builds. Distinguish between currently-held keys and keys that have been held, and expose these values through a nicely-named API so other code could, say, check on the current set of steno chording in order to make displays. Also in passing fix up the "state" value having external linkage so it could clash with other people's variable declarations. The API also provides hooks for key processing and steno chord events, so you can monitor those events without having to run in matrix_scan_user and recheck the values directly. Also document these. There is no path through processing a key that doesn't end with a return false, so the nested return foo() are gone and we just return false. * Pull information from config.h and rules.mk (#2711) * Pull information from config.h and rules.mk * Readd the kbd75 maintainer * Remove obsolete info.json entries (#2712) * Clean up some long-standing errors when populating the API (#2715) * More Configurator Warning Fixes (#2716) * mf68_ble did not have the correct .c and .h files * Fix JC65 KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for s60_x * Convert KEYMAP to LAYOUT for lets_split boards * Convert KEYMAP to LAYOUT * more fixes to keymap for iris * convert KEYMAP to LAYOUT for levinson keyboard * change losinggeneration's KEYMAP to LAYOUT * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for nyquist * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for viterbi * convert KEYMAP to LAYOUT * convert KEYMAP and its subsidiries to the LAYOUT standard * convert KEYMAP and its subsidiries to the new LAYOUT standard * Normacos keymap for let's split keyboard (#2691) * Cheers let's split keymap * fixed typo on norman layer of cheers keymap for let's split * fixed right handed mappings for home row * cheers keymap for let's split redefinition * updated Cheers keymap for let's split * cheers keymap for let's split updated with some terminal macros * renamed cheers let's split keymap to a more appropriate normacos * updated normacos keymap doc / removed non functional keys * reset let's split rules to default values * added more spotlight search macros * normalized keymap comments * Moved numpad on lower layer * hhkb jp personal keymap (#2698) * Add JJ40 Cockpit personal keymap (#2713) * Add JJ40 Cockpit keymap * Fix lower layer symbols * Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718) * add readme to ktype keyboard * add readme to m10a * add readme to mini1800 * add readme to parent directory
7 years ago
[_LOWER] = LAYOUT( \
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
8 years ago
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Raise
* ,-----------------------------------------------------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | Next | Vol- | Vol+ | Play |
* `-----------------------------------------------------------------------------------'
*/
Pull in Upstream (#1) * Various tweaks for some Input:Club build processes * change KEYMAP to LAYOUT for all new keyboards made using this script * Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap * Add Nyquist keymap (#2692) * nyquist * danielhklein nyquist setup * shift left controls * remove readme * cleanup before pr * ready for pr * Adds Phantom TKL support (#2696) * Add an info.json to phantom keyboard * Add layouts - KEYMAP_WINKEYLESS - KEYMAP_7BIT - KEYMAP_ISO - KEYMAP_ISO_WINKEYLESS * Add key_counts * Add 2 missing F-Row keys * Add TKC1800 info.json Created an info.json for the tkc1800. * Clueboard 60 info.json - adds - LAYOUT_60_ansi - LAYOUT_60_iso - KEYMAP_AEK - KEYMAP - LAYOUT_60_ansi_split_bs_rshift * Add the Speedo keyboard * Fix KC60 info.json file (#2707) * change KEYMAP to LAYOUT in all the KC60 files * Redo the info.json file * Small fixes to TKC1800 - adjust F-row to use 0.25 spacing - split left shift - add key_count * Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708) * change diverge 3 KC_KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for handwired arrow pad * change M10A to LAYOUT for m10-a * Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68 * change KC_KEYMAP to LAYOUT for nano * Refactor to LAYOUT * refactor to LAYOUT-ansi and LAYOUT_iso for s65 * LAYOUT conversions for lfkkeyboards * missed a few renames * mini1800 for lfkeyobards support of LAYOUT * Improve state/chord handling and clean up namespace Some values that can never, ever, change were held in local variables, rather than in PROGMEM. Fixed. Change "pressed" to a signed int so the test for < 0 makes sense, and to avoid possible weird failure modes in the case where a key release comes in when pressed is already zero. (Shouldn't happen, sure, but computers are weird.) A lot of things in process_steno had external linkage for no particular reason. They've been marked static. Stuff still builds. Distinguish between currently-held keys and keys that have been held, and expose these values through a nicely-named API so other code could, say, check on the current set of steno chording in order to make displays. Also in passing fix up the "state" value having external linkage so it could clash with other people's variable declarations. The API also provides hooks for key processing and steno chord events, so you can monitor those events without having to run in matrix_scan_user and recheck the values directly. Also document these. There is no path through processing a key that doesn't end with a return false, so the nested return foo() are gone and we just return false. * Pull information from config.h and rules.mk (#2711) * Pull information from config.h and rules.mk * Readd the kbd75 maintainer * Remove obsolete info.json entries (#2712) * Clean up some long-standing errors when populating the API (#2715) * More Configurator Warning Fixes (#2716) * mf68_ble did not have the correct .c and .h files * Fix JC65 KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for s60_x * Convert KEYMAP to LAYOUT for lets_split boards * Convert KEYMAP to LAYOUT * more fixes to keymap for iris * convert KEYMAP to LAYOUT for levinson keyboard * change losinggeneration's KEYMAP to LAYOUT * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for nyquist * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for viterbi * convert KEYMAP to LAYOUT * convert KEYMAP and its subsidiries to the LAYOUT standard * convert KEYMAP and its subsidiries to the new LAYOUT standard * Normacos keymap for let's split keyboard (#2691) * Cheers let's split keymap * fixed typo on norman layer of cheers keymap for let's split * fixed right handed mappings for home row * cheers keymap for let's split redefinition * updated Cheers keymap for let's split * cheers keymap for let's split updated with some terminal macros * renamed cheers let's split keymap to a more appropriate normacos * updated normacos keymap doc / removed non functional keys * reset let's split rules to default values * added more spotlight search macros * normalized keymap comments * Moved numpad on lower layer * hhkb jp personal keymap (#2698) * Add JJ40 Cockpit personal keymap (#2713) * Add JJ40 Cockpit keymap * Fix lower layer symbols * Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718) * add readme to ktype keyboard * add readme to m10a * add readme to mini1800 * add readme to parent directory
7 years ago
[_RAISE] = LAYOUT( \
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
8 years ago
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
* | | Reset| | | | | | | | | | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* | | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |
* `-----------------------------------------------------------------------------------'
*/
Pull in Upstream (#1) * Various tweaks for some Input:Club build processes * change KEYMAP to LAYOUT for all new keyboards made using this script * Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap * Add Nyquist keymap (#2692) * nyquist * danielhklein nyquist setup * shift left controls * remove readme * cleanup before pr * ready for pr * Adds Phantom TKL support (#2696) * Add an info.json to phantom keyboard * Add layouts - KEYMAP_WINKEYLESS - KEYMAP_7BIT - KEYMAP_ISO - KEYMAP_ISO_WINKEYLESS * Add key_counts * Add 2 missing F-Row keys * Add TKC1800 info.json Created an info.json for the tkc1800. * Clueboard 60 info.json - adds - LAYOUT_60_ansi - LAYOUT_60_iso - KEYMAP_AEK - KEYMAP - LAYOUT_60_ansi_split_bs_rshift * Add the Speedo keyboard * Fix KC60 info.json file (#2707) * change KEYMAP to LAYOUT in all the KC60 files * Redo the info.json file * Small fixes to TKC1800 - adjust F-row to use 0.25 spacing - split left shift - add key_count * Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708) * change diverge 3 KC_KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for handwired arrow pad * change M10A to LAYOUT for m10-a * Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68 * change KC_KEYMAP to LAYOUT for nano * Refactor to LAYOUT * refactor to LAYOUT-ansi and LAYOUT_iso for s65 * LAYOUT conversions for lfkkeyboards * missed a few renames * mini1800 for lfkeyobards support of LAYOUT * Improve state/chord handling and clean up namespace Some values that can never, ever, change were held in local variables, rather than in PROGMEM. Fixed. Change "pressed" to a signed int so the test for < 0 makes sense, and to avoid possible weird failure modes in the case where a key release comes in when pressed is already zero. (Shouldn't happen, sure, but computers are weird.) A lot of things in process_steno had external linkage for no particular reason. They've been marked static. Stuff still builds. Distinguish between currently-held keys and keys that have been held, and expose these values through a nicely-named API so other code could, say, check on the current set of steno chording in order to make displays. Also in passing fix up the "state" value having external linkage so it could clash with other people's variable declarations. The API also provides hooks for key processing and steno chord events, so you can monitor those events without having to run in matrix_scan_user and recheck the values directly. Also document these. There is no path through processing a key that doesn't end with a return false, so the nested return foo() are gone and we just return false. * Pull information from config.h and rules.mk (#2711) * Pull information from config.h and rules.mk * Readd the kbd75 maintainer * Remove obsolete info.json entries (#2712) * Clean up some long-standing errors when populating the API (#2715) * More Configurator Warning Fixes (#2716) * mf68_ble did not have the correct .c and .h files * Fix JC65 KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for s60_x * Convert KEYMAP to LAYOUT for lets_split boards * Convert KEYMAP to LAYOUT * more fixes to keymap for iris * convert KEYMAP to LAYOUT for levinson keyboard * change losinggeneration's KEYMAP to LAYOUT * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for nyquist * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for viterbi * convert KEYMAP to LAYOUT * convert KEYMAP and its subsidiries to the LAYOUT standard * convert KEYMAP and its subsidiries to the new LAYOUT standard * Normacos keymap for let's split keyboard (#2691) * Cheers let's split keymap * fixed typo on norman layer of cheers keymap for let's split * fixed right handed mappings for home row * cheers keymap for let's split redefinition * updated Cheers keymap for let's split * cheers keymap for let's split updated with some terminal macros * renamed cheers let's split keymap to a more appropriate normacos * updated normacos keymap doc / removed non functional keys * reset let's split rules to default values * added more spotlight search macros * normalized keymap comments * Moved numpad on lower layer * hhkb jp personal keymap (#2698) * Add JJ40 Cockpit personal keymap (#2713) * Add JJ40 Cockpit keymap * Fix lower layer symbols * Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718) * add readme to ktype keyboard * add readme to m10a * add readme to mini1800 * add readme to parent directory
7 years ago
[_ADJUST] = LAYOUT( \
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
8 years ago
_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
)
};
#ifdef AUDIO_ENABLE
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dvorak[][2] = SONG(DVORAK_SOUND);
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
#endif
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
#endif
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_colemak, false, 0);
#endif
persistent_default_layer_set(1UL<<_COLEMAK);
}
return false;
break;
case DVORAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
#endif
persistent_default_layer_set(1UL<<_DVORAK);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
Pull in Upstream (#1) * Various tweaks for some Input:Club build processes * change KEYMAP to LAYOUT for all new keyboards made using this script * Add support for rev3 of the Atom47 (#2672) * Added support for rev3 of the Atom47 * Updated Atom47 readme's * Fix redefine error on rev2 and add maartenwut's keymap * Fix redefine error on LEdiodes keymap * Add Nyquist keymap (#2692) * nyquist * danielhklein nyquist setup * shift left controls * remove readme * cleanup before pr * ready for pr * Adds Phantom TKL support (#2696) * Add an info.json to phantom keyboard * Add layouts - KEYMAP_WINKEYLESS - KEYMAP_7BIT - KEYMAP_ISO - KEYMAP_ISO_WINKEYLESS * Add key_counts * Add 2 missing F-Row keys * Add TKC1800 info.json Created an info.json for the tkc1800. * Clueboard 60 info.json - adds - LAYOUT_60_ansi - LAYOUT_60_iso - KEYMAP_AEK - KEYMAP - LAYOUT_60_ansi_split_bs_rshift * Add the Speedo keyboard * Fix KC60 info.json file (#2707) * change KEYMAP to LAYOUT in all the KC60 files * Redo the info.json file * Small fixes to TKC1800 - adjust F-row to use 0.25 spacing - split left shift - add key_count * Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708) * change diverge 3 KC_KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for handwired arrow pad * change M10A to LAYOUT for m10-a * Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68 * change KC_KEYMAP to LAYOUT for nano * Refactor to LAYOUT * refactor to LAYOUT-ansi and LAYOUT_iso for s65 * LAYOUT conversions for lfkkeyboards * missed a few renames * mini1800 for lfkeyobards support of LAYOUT * Improve state/chord handling and clean up namespace Some values that can never, ever, change were held in local variables, rather than in PROGMEM. Fixed. Change "pressed" to a signed int so the test for < 0 makes sense, and to avoid possible weird failure modes in the case where a key release comes in when pressed is already zero. (Shouldn't happen, sure, but computers are weird.) A lot of things in process_steno had external linkage for no particular reason. They've been marked static. Stuff still builds. Distinguish between currently-held keys and keys that have been held, and expose these values through a nicely-named API so other code could, say, check on the current set of steno chording in order to make displays. Also in passing fix up the "state" value having external linkage so it could clash with other people's variable declarations. The API also provides hooks for key processing and steno chord events, so you can monitor those events without having to run in matrix_scan_user and recheck the values directly. Also document these. There is no path through processing a key that doesn't end with a return false, so the nested return foo() are gone and we just return false. * Pull information from config.h and rules.mk (#2711) * Pull information from config.h and rules.mk * Readd the kbd75 maintainer * Remove obsolete info.json entries (#2712) * Clean up some long-standing errors when populating the API (#2715) * More Configurator Warning Fixes (#2716) * mf68_ble did not have the correct .c and .h files * Fix JC65 KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for s60_x * Convert KEYMAP to LAYOUT for lets_split boards * Convert KEYMAP to LAYOUT * more fixes to keymap for iris * convert KEYMAP to LAYOUT for levinson keyboard * change losinggeneration's KEYMAP to LAYOUT * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for nyquist * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for viterbi * convert KEYMAP to LAYOUT * convert KEYMAP and its subsidiries to the LAYOUT standard * convert KEYMAP and its subsidiries to the new LAYOUT standard * Normacos keymap for let's split keyboard (#2691) * Cheers let's split keymap * fixed typo on norman layer of cheers keymap for let's split * fixed right handed mappings for home row * cheers keymap for let's split redefinition * updated Cheers keymap for let's split * cheers keymap for let's split updated with some terminal macros * renamed cheers let's split keymap to a more appropriate normacos * updated normacos keymap doc / removed non functional keys * reset let's split rules to default values * added more spotlight search macros * normalized keymap comments * Moved numpad on lower layer * hhkb jp personal keymap (#2698) * Add JJ40 Cockpit personal keymap (#2713) * Add JJ40 Cockpit keymap * Fix lower layer symbols * Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718) * add readme to ktype keyboard * add readme to m10a * add readme to mini1800 * add readme to parent directory
7 years ago
}