Fixed naming of OTG.h functions, to make them consistent with the rest of the library API.

LUFA/ChangeLog.txt

@@ -58,6 +58,7 @@
   *  - Renamed the USB_PowerOnErrorCodes_t enum to USB_InitErrorCodes_t, renamed the POWERON_ERROR_NoUSBModeSpecified enum value to
   *    USB_INITERROR_NoUSBModeSpecified
   *  - Renamed USB_PowerOnFail event to USB_InitFailure
+  *  - Renamed OTG.h header functions to be more consistent with the rest of the library API
   *  - Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander)
   *  - USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode
   *    rather than having the library pass only partially read header data to the application

LUFA/Drivers/USB/LowLevel/LowLevel.h

@@ -283,7 +283,7 @@
 
 		/* Enums: */
 			/** Enum for error codes relating to the powering on of the USB interface. These error codes are
-			 *  used in the ErrorCode parameter value of the \ref USB_PowerOnFail event.
+			 *  used in the ErrorCode parameter value of the \ref USB_InitFailure event.
 			 */
 			enum USB_InitErrorCodes_t
 			{

LUFA/Drivers/USB/LowLevel/OTG.h

@@ -66,34 +66,34 @@
 				/** Initiate a Host Negotiation Protocol request. This indicates to the other connected device
 				 *  that the device wishes to change device/host roles.
 				 */
-				static inline void USB_OTG_DEV_Request_HNP(void);
+				static inline void USB_OTG_Device_RequestHNP(void);
 				
 				/** Cancel a Host Negotiation Protocol request. This stops a pending HNP request to the other
 				 *  connected device.
 				 */
-				static inline void USB_OTG_DEV_Cancel_HNP_Request(void);
+				static inline void USB_OTG_Device_CancelHNPRequest(void);
 				
 				/** Determines if the device is currently sending a HNP to an attached host.
 				 *
 				 *  \return Boolean true if currently sending a HNP to the other connected device, false otherwise
 				 */
-				static inline bool USB_OTG_DEV_IsSendingHNP(void);
+				static inline bool USB_OTG_Device_IsSendingHNP(void);
 				
 				/** Accepts a HNP from a connected device, indicating that both devices should exchange
 				 *  device/host roles.
 				 */
-				static inline void USB_OTG_HOST_Accept_HNP(void);
+				static inline void USB_OTG_Host_AcceptHNP(void);
 				
 				/** Rejects a HNP from a connected device, indicating that both devices should remain in their
 				 *  current device/host roles.
 				 */
-				static inline void USB_OTG_HOST_Reject_HNP(void);
+				static inline void USB_OTG_Host_RejectHNP(void);
 				
 				/** Indicates if the connected device is not currently sending a HNP request.
 				 *
 				 *  \return Boolean true if a HNP is currently being issued by the connected device, false otherwise.
 				 */
-				static inline bool USB_OTG_HOST_IsHNPReceived(void);
+				static inline bool USB_OTG_Host_IsHNPReceived(void);
 				
 				/** Initiates a Session Request Protocol request. Most OTG devices turn off VBUS when the USB
 				 *  interface is not in use, to conserve power. Sending a SRP to a USB OTG device running in
@@ -104,22 +104,22 @@
 				 *
 				 *  \param SRPTypeMask  Mask indicating the type of SRP to use, either \ref USB_OTG_SRP_VBUS or \ref USB_OTG_STP_DATA.
 				 */
-				static inline void USB_OTG_DEV_Initiate_SRP(uint8_t SRPTypeMask);
+				static inline void USB_OTG_Dev_InitiateSRP(uint8_t SRPTypeMask);
 			#else
 
-				#define USB_OTG_DEV_Request_HNP()          MACROS{ OTGCON |=  (1 << HNPREQ); }MACROE
+				#define USB_OTG_Device_RequestHNP()         MACROS{ OTGCON |=  (1 << HNPREQ); }MACROE
 
-				#define USB_OTG_DEV_Cancel_HNP_Request()   MACROS{ OTGCON &= ~(1 << HNPREQ); }MACROE
+				#define USB_OTG_Device_CancelHNPRequest()   MACROS{ OTGCON &= ~(1 << HNPREQ); }MACROE
 
-				#define USB_OTG_DEV_IsSendingHNP()               ((OTGCON &   (1 << HNPREQ)) ? true : false)
+				#define USB_OTG_Device_IsSendingHNP()             ((OTGCON &   (1 << HNPREQ)) ? true : false)
 				
-				#define USB_OTG_HOST_Accept_HNP()          MACROS{ OTGCON |=  (1 << HNPREQ); }MACROE
+				#define USB_OTG_Host_AcceptHNP()            MACROS{ OTGCON |=  (1 << HNPREQ); }MACROE
 
-				#define USB_OTG_HOST_Reject_HNP()          MACROS{ OTGCON &= ~(1 << HNPREQ); }MACROE
+				#define USB_OTG_Host_RejectHNP()            MACROS{ OTGCON &= ~(1 << HNPREQ); }MACROE
 				
-				#define USB_OTG_HOST_IsHNPReceived()             ((OTGCON &   (1 << HNPREQ)) ? true : false)
+				#define USB_OTG_Host_IsHNPReceived()              ((OTGCON &   (1 << HNPREQ)) ? true : false)
 				
-				#define USB_OTG_DEV_Initiate_SRP(type)     MACROS{ OTGCON = ((OTGCON & ~(1 << SRPSEL)) | (type | (1 << SRPREQ))); }MACROE
+				#define USB_OTG_Device_InitiateSRP(type)    MACROS{ OTGCON = ((OTGCON & ~(1 << SRPSEL)) | (type | (1 << SRPREQ))); }MACROE
 			#endif
 	
 #endif

LUFA/MigrationInformation.txt

@@ -20,6 +20,8 @@
  *
  *  <b>Dual Role Mode</b>
  *    - The USB_PowerOnFail even has been renamed to USB_InitFailure.
+ *    - The functions in OTG.h have been renamed to remain more consistent with the library API. See the functions in OTG.h for more
+ *      details.
  *
  *  <b>Library Demos</b>
  *    - Most demos, bootloaders and applications have had significant changes from previous versions. Applications built off of any