* `F12` was replaced by an `Fx` key, that activate the **Media** layer as a one-shot layer, and also `Alt` as a one-shot modifier.
### Base layer changes
* The `Media Stop` key is now a tap-dance key, and resets the device for programming on the fourth tap.
### Miscellaneous
* `π` can now be entered with UCIS.
* `🐁` can now be entered with UCIS.
### Tools
* The `tools/layer-notify` tool was removed, it was an example, which I don't use.
#### `tools/hid-commands`
* Now looks at the `DISABLE_APPSEL_START` environment value, and does not display an AppSel notification if it is non-empty.
* Will attempt to re-program the keyboard when receiving a `reflash` command.
* No longer tries to select Emacs 24 on `APPSEL_EMACS`, rather, it goes for any Emacs.
* The `APPSEL_MUSIC` command now includes Kodi in the list too, as the last choice.
## v1.8
*2016-10-03*
@ -13,7 +43,7 @@
### Miscellaneous
* Fixed the [Steno](#steno-layer) toggle key.
* Fixed the **Steno** toggle key.
## v1.7
@ -21,9 +51,9 @@
### Overall changes
* The number row has been completely rearranged on both the [Base](#base-layer) and the [ADORE](#adore-layer) layers.
* The number row has been completely rearranged on both the **Base** and the **ADORE** layers.
* The number/function key behavior was changed: function keys are now on the **Media**.
* The `:`/`;` and `-`/`_` keys were put back to their thumb position on the bottom row, on both the [Base](#base-layer) and [ADORE](#adore-layer) layers.
* The `:`/`;` and `-`/`_` keys were put back to their thumb position on the bottom row, on both the **Base** and **ADORE** layers.
* The bottom large keys on the inner side of each half now function as [tmux](http://tmux.github.io/) keys: the left to send the prefix, the right to send the `display-panes` key. The left also doubles as a GNU screen prefix key, and sends `C-a` when double tapped.
* A number of functions, such as the **AppSel** layer, now require the `hid-commands` tool to be running, with the output of `hid_listen` being piped to it.
@ -59,13 +89,13 @@
### Base layer changes
* The parentheses & bracket keys have been merged: tapping them results in `[` or `{` (if it was shifted), double tapping leads to `(`.
* The `:;` and `-_` keys are now available on the base layer, on their [ADORE](#adore-layer) location, too, just below `[{(`/`]})`.
* The `:;` and `-_` keys are now available on the base layer, on their **ADORE** location, too, just below `[{(`/`]})`.
* The `Apps` key has been replaced by `F12`.
* The `-`/`_` is no longer a tap-dance key.
### ADORE layer changes
* Adjustments were made to the [ADORE](#adore-layer) layer, to separate some inconvenient combinations.
* Adjustments were made to the **ADORE** layer, to separate some inconvenient combinations.
### Miscellaneous changes
@ -84,9 +114,9 @@
* The **1HAND** layer has been removed.
* A `Delete` key is now available on the right thumb cluster.
* The [ADORE](#adore-layer) layer received a major update, see the layout image above.
* It is now possible to enable automatic logging for the [ADORE](#adore-layer) layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default.
* The `~` key and the `Media Next/Prev` key have been swapped on the [base layer](#base-layer).
* The **ADORE** layer received a major update, see the layout image above.
* It is now possible to enable automatic logging for the **ADORE** layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default.
* The `~` key and the `Media Next/Prev` key have been swapped on the **Base** layer.
* On the **ARROW** layer, `Backspace` has been replaced by `Enter`.
* There is some experimental support for entering Unicode symbols.
@ -104,33 +134,33 @@
*2016-07-06*
* Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a [heatmap](#heatmap) out of the logs.
* The arrow and navigation keys were rearranged again, and now require an additional key being held to activate. See the [base layer](#base-layer) for an image that shows where arrows are.
* The **experimental** layer has been redone, and is now called [ADORE](#adore-layer), and as such, can be enabled by `LEAD a` now.
* Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a *heatmap* out of the logs.
* The arrow and navigation keys were rearranged again, and now require an additional key being held to activate. See the **Base** layer for an image that shows where arrows are.
* The **experimental** layer has been redone, and is now called **ADORE**, and as such, can be enabled by `LEAD a` now.
* Switching between Dvorak and ADORE is now persisted into EEPROM, and survives a reboot.
## v1.2
*2016-06-22*
* The forced NKRO mode can be easily toggled off at compile-time, to make the firmware compatible with [certain operating systems](#using-on-windows).
* The forced NKRO mode can be easily toggled off at compile-time, to make the firmware compatible with certain operating systems.
* The `:;` key has changed behaviour: to access the `;` symbol, the key needs to be double-tapped, instead of shifted.
* The `=` and `\` keys were swapped, `=` moved to the home row, on both the [base](#base-layer) and the **experimental** layers.
* The `=` and `\` keys were swapped, `=` moved to the home row, on both the **Base** and the **experimental** layers.
* The arrow and navigation keys were redone, they are now more accessible, but the navigation keys require an extra tap to access.
* The **Emacs** layer is gone, replaced by a simplified **navigation and media** layer.
* `LEAD v` types the firmware version, and the keymap version.
* On the **experimental** layer, the `L` and `Q`, and the `K` and `G` keys were swapped.
* The [Steno](#steno-layer) layer gained a few more `#` and `*` keys, to make it easier on my fingers.
* The **Steno** layer gained a few more `#` and `*` keys, to make it easier on my fingers.
## v1.1
*2016-06-14*
* The keyboard starts in NKRO mode, bootmagic and other things are disabled.
* A [Steno](#steno-layer) layer was added, to be used with Plover.
* A **Steno** layer was added, to be used with Plover.
* An **experimental** layer was added, something halfway between Dvorak and Capewell-Dvorak. A work in progress.
* `LEAD y` types `\o/`.
* Some keys on the [Base](#base-layer) layer have been moved around:
* Some keys on the **Base** layer have been moved around:
- `?` moved to the left pinky, left of `Q`.
- `=` shifted one row down, but `F11` stayed where it was.
@ -43,6 +43,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest
* The `GUI` key is special, because when I double-tap it, it sends `GUI + w`, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout.
* The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode.
* The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle.
* The **Fx** key is one-shot, and activates the **Media** layer, along with a one-shot `Alt`.
* When holding the `Tab`/**Arrow** key, the arrow layer activates while the key is held. Tapping the key produces the normal, `Tab` key. Double-tapping it toggles the **Arrow** layer on until a third tap.
* Tapping the `:` key once yields `:`, tapping it twice yields `;`.
* Tapping the `[{(`/`)}]` keys once yields `[` (or `{` when shifted), tapping them twice yields `(`.
@ -93,12 +94,7 @@ Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers
Once in the Unicode Symbol Input mode, one is able to type in symbol names, press `Enter` or `Space`, and get the Unicode symbol itself back. When in the mode, a capital `U` is printed first. Once the sequence is finished, all of it is erased by sending enough `Backspace` taps, and the firmware starts the OS-specific unicode input sequence. Then, it looks up the symbol name, and enters the associated code. If it is not found, it will just replay the pressed keycodes.
The currently supported symbols are:
- `snowman`: ☃
- `kiss`: 😙
- `rofl`: 🤣
- `poop`: 💩
For the list of supported symbols, please see the source.
This is an experimental feature, and may or may not work reliably.
Erez Zukerman
8 years ago
committed by
