From 0e2786e39602bdfcdb8aa567eaf769c700a1b3db Mon Sep 17 00:00:00 2001 From: SethSenpai Date: Mon, 3 Oct 2016 18:27:52 +0000 Subject: [PATCH] updated readme with images --- keyboards/handwired/gamenum/README.md | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/keyboards/handwired/gamenum/README.md b/keyboards/handwired/gamenum/README.md index 9e22ff2fcb..5b53004efd 100644 --- a/keyboards/handwired/gamenum/README.md +++ b/keyboards/handwired/gamenum/README.md @@ -16,7 +16,15 @@ Firmware was build for use with a Pro Micro based on a ATMEGA32u4 at 16mHz. The indicator LED's are normally assigned to `pin C6` and `pin D4`, C6 goes high when the first layer is used, D4 goes high when layer 2 is used. Both LED's are off when the default layer is enabled. '+' of the LED goes to the respective pins and can be joined together on the '-' into a resistor that runs to the ground pin of the pro micro. With a standard LED a resistor value of 100 ohm is fine, keep in mind that you cannot use high powered LEDS on these pins without ruining your pro micro. -Schematic of the build is coming soon. +## schematic of the switches and diodes + +![schematic overview](http://i.imgur.com/fleitoA.jpg) + +Keep in mind that the minus of the diodes should point towards the pro micros inputs. + +##LED hookup + +![led overview](http://i.imgur.com/U6m865n.jpg) ## Adding more layers