diff --git a/keyboards/atreus62/keymaps/mneme/Makefile b/keyboards/atreus62/keymaps/mneme/Makefile new file mode 100644 index 0000000000..046aec2733 --- /dev/null +++ b/keyboards/atreus62/keymaps/mneme/Makefile @@ -0,0 +1,5 @@ +TAP_DANCE_ENABLE = yes +NKRO_ENABLE = true +MOUSEKEY_ENABLE = no +EXTRAKEY_ENABLE = yes +CONSOLE_ENABLE = no diff --git a/keyboards/atreus62/keymaps/mneme/README.md b/keyboards/atreus62/keymaps/mneme/README.md new file mode 100644 index 0000000000..04ab070be6 --- /dev/null +++ b/keyboards/atreus62/keymaps/mneme/README.md @@ -0,0 +1,56 @@ + + +Mnemes Swedish Bonaza +======================= + +My Layout in process, most of the code is shamelessly stolen from [algernons][algernon] excellent layout + + [algernon]: https://github.com/algernon/ergodox-layout + +It's for Windows (current work forces me to) and Swedish (matter of birth) so ymmw. + +## Table of Contents + +* [Layouts](#layouts) + - [Base layer](#base-layer) + - [Nav layer](#nav-layer) + - [Sym layer](#sym-layer) + - [LED states](#led-states) + +# Layouts + +## Base layer + +![Base layer](img/base.png) + + +* The number row doubles as a function row. Short presses produces numbers, long presses produces Fxx +* The `Shift`, `Alt`, and `Control` modifiers are one-shot. +* `Backspace` and `Enter` doubles as switches to the `sym` layer when held +* The `ESC` key also doubles as a one-shot cancel key. +* The **Lead** key is followed by a sequence of keys. + - `LEAD l` : `lgui+l`. + - `LEAD s l` : `λ`. + - `LEAD s s` : `¯\_(ツ)_/¯` + - `LEAD s f` : `凸(ツ)凸` + - `LEAD a *` : Application switching based on position in start menu. Very specific to my computer. + + +## Nav layer + +![Nav layer](img/fun.png) + +Basic navigation on the right hand and modifiers close +by for the left. The latter because I tend to use `ctrl+arrows` quite a lot. + +## Sym layer + +![Sym layer](img/sym.png) + +* Easy access to most symbols I use on a daily basis. Most common are on the home row, the rest are grouped as best as I could. + +- `eq` : Tapdance, produces `===` and `!==` +- `fun`: Tapdance, produces `=>` and `() => {\n` + +# License + GPL-3+ diff --git a/keyboards/atreus62/keymaps/mneme/config.h b/keyboards/atreus62/keymaps/mneme/config.h new file mode 100644 index 0000000000..2c2a08c05e --- /dev/null +++ b/keyboards/atreus62/keymaps/mneme/config.h @@ -0,0 +1,7 @@ +#define ONESHOT_TIMEOUT 3000 +#define TAPPING_TERM 200 +#define PREVENT_STUCK_MODIFIERS + +#define LEADER_TIMEOUT 1000 + +#include "../../config.h" diff --git a/keyboards/atreus62/keymaps/mneme/img/base.png b/keyboards/atreus62/keymaps/mneme/img/base.png new file mode 100644 index 0000000000..86907d5442 Binary files /dev/null and b/keyboards/atreus62/keymaps/mneme/img/base.png differ diff --git a/keyboards/atreus62/keymaps/mneme/img/fun.png b/keyboards/atreus62/keymaps/mneme/img/fun.png new file mode 100644 index 0000000000..ec5a478c64 Binary files /dev/null and b/keyboards/atreus62/keymaps/mneme/img/fun.png differ diff --git a/keyboards/atreus62/keymaps/mneme/img/sym.png b/keyboards/atreus62/keymaps/mneme/img/sym.png new file mode 100644 index 0000000000..11b5bd4b0f Binary files /dev/null and b/keyboards/atreus62/keymaps/mneme/img/sym.png differ diff --git a/keyboards/atreus62/keymaps/mneme/keymap.c b/keyboards/atreus62/keymaps/mneme/keymap.c new file mode 100644 index 0000000000..7c18799826 --- /dev/null +++ b/keyboards/atreus62/keymaps/mneme/keymap.c @@ -0,0 +1,337 @@ +#include +#include "atreus62.h" +#include "led.h" +#include "action_layer.h" +#include "action_util.h" + +/* + *WINDOWS SWEDISH + */ +#define KN_HALF KC_GRV // 1/2 +#define KN_PLUS KC_MINS // + +#define KN_ACUT KC_EQL // ´ +#define KN_AO KC_LBRC // Å +#define KN_UMLA KC_RBRC // ¨ +#define KN_OE KC_SCLN // Ö +#define KN_AE KC_QUOT // Ä +#define KN_QUOT KC_NUHS // ' +#define KN_LABK KC_NUBS // < +#define KN_MINS KC_SLSH // - +#define KN_EXLM LSFT(KC_1) // ! +#define KN_DQT LSFT(KC_2) // " +#define KN_AT RALT(KC_2) // @ +#define KN_HASH LSFT(KC_3) // # +#define KN_DLR RALT(KC_4) // $ +#define KN_PERC LSFT(KC_5) // % +#define KN_AMPR LSFT(KC_6) // & +#define KN_SLSH LSFT(KC_7) // / +#define KN_LPRN LSFT(KC_8) // ( +#define KN_RPRN LSFT(KC_9) // ) +#define KN_EQL LSFT(KC_0) // = +#define KN_UNDS LSFT(KN_MINS) // _ +#define KN_QUES LSFT(KN_PLUS) // ? +#define KN_GRAV LSFT(KN_ACUT) // ` +#define KN_LCBR RALT(KC_7) // { +#define KN_RCBR RALT(KC_0) // } +#define KN_LBRC RALT(KC_8) // [ +#define KN_RBRC RALT(KC_9) // ] +#define KN_RABK LSFT(KN_LABK) // < +#define KN_COLN LSFT(KC_DOT) // : +#define KN_SCLN LSFT(KC_COMM) // : +#define KN_PIPE RALT(KN_LABK) // | +#define KN_QUES LSFT(KN_PLUS) // ? +#define KN_CIRC LSFT(KN_UMLA) // ^ +#define KN_ASTR LSFT(KN_QUOT) // * +#define KN_TILD RALT(KN_UMLA) // ~ +#define KN_BSLS RALT(KN_PLUS) // + +#define OSM_LCTL OSM(MOD_LCTL) +#define OSM_LALT OSM(MOD_LALT) +#define OSM_LSFT OSM(MOD_LSFT) + +#define KC_HYP LSFT(LALT(LCTL(KC_LGUI))) + +#define KC_COPY LCTL(KC_C) +#define KC_PASTE LCTL(KC_V) +#define KC_UNDO LCTL(KC_Z) +#define KC_REDO LCTL(LSFT(KC_Z)) + +// Layers +enum { + BASE = 0, + NAV, + SYM +}; + +//Macros +enum { + KF_1 = 0, // 1, F1 + KF_2, // ... + KF_3, + KF_4, + KF_5, + KF_6, + KF_7, + KF_8, + KF_9, + KF_10, + KF_11, + KF_12 +}; + +// Tapdance +enum { + TD_FUN = 0, + TD_EQ +}; + +//Custom keycodes +enum { + PLACEHOLDER = SAFE_RANGE +}; + +//State and timers +uint16_t kf_timers[12]; + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [BASE] = { + + { M(KF_11) ,M(KF_1) ,M(KF_2) ,M(KF_3) ,M(KF_4) ,M(KF_5) ,KC_NO ,M(KF_6) ,M(KF_7) ,M(KF_8) ,M(KF_9) ,M(KF_10) ,M(KF_12) }, + { KC_TAB ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_NO ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KN_AO }, + { OSM_LCTL ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G ,KC_NO ,KC_H ,KC_J ,KC_K ,KC_L ,KN_OE ,KN_AE }, + { OSM_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,KC_DELT ,KC_N ,KC_M ,KC_COMM ,KC_DOT ,KN_MINS ,OSM_LSFT }, + { MO(NAV) ,OSM_LCTL ,OSM_LALT ,KC_LGUI ,KC_SPC ,LT(SYM,KC_BSPC) ,KC_HYP ,LT(SYM,KC_ENT) ,KC_SPC ,KC_LEAD ,KC_LALT ,KC_LCTRL ,MO(NAV) } + + }, + [NAV] = { + + { KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS }, + { KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_NO ,KC_PGUP ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS }, + { KC_TRNS ,KC_LSFT ,KC_LCTL ,KC_LALT ,KC_L ,KC_TRNS ,KC_NO ,KC_PGDN ,KC_LEFT ,KC_DOWN ,KC_RIGHT ,KC_TRNS ,KC_TRNS }, + { KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS }, + { KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_VOLD ,KC_VOLU } + + }, + [SYM] = { + + { KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,TD(TD_EQ) ,KC_NO ,TD(TD_FUN) ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS }, + { KC_TRNS ,KN_LABK ,KN_RABK ,KN_LCBR ,KN_RCBR ,KN_PLUS ,KC_NO ,KN_AT ,KN_DQT ,KN_QUOT ,KN_GRAV ,KN_SLSH ,KC_TRNS }, + { KC_TRNS ,KN_EXLM ,KN_EQL ,KN_LPRN ,KN_RPRN ,KN_MINS ,KC_NO ,KN_UNDS ,KN_SCLN ,KN_COLN ,KN_AMPR ,KN_PIPE ,KC_TRNS }, + { KC_TRNS ,KN_DLR ,KN_PERC ,KN_LBRC ,KN_RBRC ,KN_ASTR ,KC_TRNS ,KN_HASH ,KC_COMM ,KC_DOT ,KN_QUES ,KN_BSLS ,KC_TRNS }, + { KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS } + + } +}; + +#define TAP_ONCE(code) \ + register_code (code); \ + unregister_code (code) + +static void m_tapn (uint8_t code, ...) { + uint8_t kc = code; + va_list ap; + + va_start(ap, code); + do { + register_code(kc); + unregister_code(kc); + wait_ms(50); + kc = va_arg(ap, int); + } while (kc != 0); + va_end(ap); +} + +static void m_handle_kf (keyrecord_t *record, uint8_t id) { + uint8_t code = id - KF_1; + + if (record->event.pressed) { + kf_timers[code] = timer_read (); + } else { + uint8_t kc_base; + uint8_t long_press = (kf_timers[code] && timer_elapsed (kf_timers[code]) > TAPPING_TERM); + + kf_timers[code] = 0; + + switch(id){ + case KF_1 ... KF_10: + if (long_press) { + // Long press + kc_base = KC_F1; + } else { + kc_base = KC_1; + } + code += kc_base; + break; + case KF_11: + code = long_press ? KC_F11 : KC_ESC; + break; + case KF_12: + code = long_press ? KC_F12 : KN_PLUS; + break; + } + register_code (code); + unregister_code (code); + } +} + +const uint16_t PROGMEM fn_actions[] = { +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch (id) { + case KF_1 ... KF_12: + m_handle_kf(record, id); + break; + } + return MACRO_NONE; +}; + +// Custom keycodes +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + bool queue = true; + + //Cancle one-shot mods. + switch (keycode) { + case KC_ESC: + if (record->event.pressed && get_oneshot_mods() && !has_oneshot_mods_timed_out()) { + clear_oneshot_mods(); + queue = false; + } + break; + } + return queue; +} + +// TAP DANCE SETTINGS +void dance_eq (qk_tap_dance_state_t *state, void *user_data) { + switch (state->count) { + case 1: // === + register_code(KC_LSHIFT); + m_tapn(KC_0, KC_0, KC_0, 0); + unregister_code(KC_LSHIFT); + break; + case 2: + register_code(KC_LSHIFT); + m_tapn(KC_1, KC_0, KC_0, 0); + unregister_code(KC_LSHIFT); + break; + default: + reset_tap_dance(state); + } +} + +void dance_fun (qk_tap_dance_state_t *state, void *user_data) { + switch (state->count) { + case 1: // => + register_code(KC_LSHIFT); + m_tapn(KC_0, KN_LABK, 0); + unregister_code(KC_LSHIFT); + break; + case 2: // () => {} + register_code(KC_LSHIFT); + m_tapn(KC_8, KC_9, KC_SPC, KC_0, KN_LABK, KC_SPC, 0); + unregister_code(KC_LSHIFT); + register_code(KC_RALT); + m_tapn(KC_7, 0); + unregister_code(KC_RALT); + TAP_ONCE(KC_ENT); + break; + default: + reset_tap_dance(state); + } +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_FUN] = ACTION_TAP_DANCE_FN (dance_fun) + ,[TD_EQ] = ACTION_TAP_DANCE_FN (dance_eq) +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + set_unicode_input_mode(UC_WINC); +}; + +LEADER_EXTERNS(); +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + LEADER_DICTIONARY() { + leading = false; + leader_end(); + SEQ_ONE_KEY(KC_L){ + register_code(KC_RGUI); + TAP_ONCE(KC_L); + unregister_code(KC_RGUI); + }; + + + SEQ_TWO_KEYS (KC_A, KC_W) { + //Web - chrome + register_code (KC_LGUI); TAP_ONCE (KC_1); unregister_code (KC_LGUI); + } + SEQ_TWO_KEYS (KC_A, KC_P) { + //sPotify + register_code (KC_LGUI); TAP_ONCE (KC_2); unregister_code (KC_LGUI); + + } + SEQ_TWO_KEYS (KC_A, KC_T) { + //Total Commander + register_code (KC_LGUI); TAP_ONCE (KC_3); unregister_code (KC_LGUI); + + } + SEQ_TWO_KEYS (KC_A, KC_A) { + //Atom + register_code (KC_LGUI); TAP_ONCE (KC_4); unregister_code (KC_LGUI); + + } + SEQ_TWO_KEYS (KC_A, KC_E) { + //Emacs + register_code (KC_LGUI); TAP_ONCE (KC_5); unregister_code (KC_LGUI); + + } + SEQ_TWO_KEYS (KC_A, KC_C) { + //Cmdr + register_code (KC_LGUI); TAP_ONCE (KC_6); unregister_code (KC_LGUI); + + } + SEQ_TWO_KEYS (KC_A, KC_S) { + //Slack + register_code (KC_LGUI); TAP_ONCE (KC_7); unregister_code (KC_LGUI); + } + + + SEQ_TWO_KEYS (KC_S, KC_S) { + // ¯\_(ツ)_/¯ + unicode_input_start(); register_hex(0xaf); unicode_input_finish(); + register_code (KC_LALT); + register_code (KC_LCTL); + TAP_ONCE (KN_PLUS); + unregister_code (KC_LCTL); + unregister_code (KC_LALT); + + register_code (KC_RSFT); TAP_ONCE (KC_8); unregister_code (KC_RSFT); + unicode_input_start (); register_hex(0x30c4); unicode_input_finish(); + register_code (KC_RSFT); TAP_ONCE (KC_9); TAP_ONCE(KC_7); unregister_code (KC_RSFT); + unicode_input_start (); register_hex(0xaf); unicode_input_finish(); + } + + SEQ_TWO_KEYS (KC_S, KC_F) { + // 凸(ツ)凸 + unicode_input_start(); register_hex(0x51F8); unicode_input_finish(); + register_code (KC_RSFT); TAP_ONCE (KC_8); unregister_code (KC_RSFT); + unicode_input_start (); register_hex(0x30c4); unicode_input_finish(); + register_code (KC_RSFT); TAP_ONCE (KC_9); unregister_code (KC_RSFT); + unicode_input_start (); register_hex(0x51F8); unicode_input_finish(); + } + + SEQ_TWO_KEYS (KC_S, KC_L) { + // λ + unicode_input_start(); + register_hex(0x03bb); + unicode_input_finish(); + } + }; +}; diff --git a/keyboards/atreus62/keymaps/mneme/unicode b/keyboards/atreus62/keymaps/mneme/unicode new file mode 100644 index 0000000000..b3f62b6d31 --- /dev/null +++ b/keyboards/atreus62/keymaps/mneme/unicode @@ -0,0 +1,114 @@ +Todo +☐ 2610 Todo +☑ 2611 Done +☒ 2612 Failed + +Operator +× 00D7 Multiplication +÷ 00F7 Division +≤ 2264 LessEqual +≥ 2265 MoreEqual +± 00B1 Plusminus + +Math +∏ 220F Product +∑ 2211 Sum +≈ 2248 Almost +≡ 2261 Equivalent +∞ 221E Infinity +‰ 2030 Mille + +Set +⊂ 2282 Subset +⊃ 2283 sUperset +∩ 2229 Intersextion +∪ 222A Union +∈ 2208 Element +∉ 2209 Notelement +∍ 220D Contains +∌ 220C doesNotcontain + +Logic +¬ 00AC Not +∧ 2227 And +∨ 2228 Or +∃ 2203 Exists +∄ 2204 Notexists + +Greek +µ 00B5 Micro +λ 03BB Lamda +Ω 2126 Omega +α 03B1 Alpha +β 03B2 Beta +γ 03B3 Gamma +π 03C0 Pi +δ 03B4 Delta + +Other +☁ 2601 Cloud +☼ 263C Sun +☂ 2602 Rain +☠ 2620 Skull +♺ 267A Recycle +👍1F44D thumbsUp +👎1F44E thumbsDown +💩 1F4A9 Poo + + +//Todo +SEQ_THREE_KEYS(KC_U, KC_G, KC_T){m_unicode(0x2610);}; // Todo +SEQ_THREE_KEYS(KC_U, KC_G, KC_D){m_unicode(0x2611);}; // Done +SEQ_THREE_KEYS(KC_U, KC_G, KC_F){m_unicode(0x2612);}; // Failed + +//Operator +SEQ_THREE_KEYS(KC_U, KC_O, KC_M){m_unicode(0x00D7);}; // Multiplication +SEQ_THREE_KEYS(KC_U, KC_O, KC_D){m_unicode(0x00F7);}; // Division +SEQ_THREE_KEYS(KC_U, KC_O, KC_L){m_unicode(0x2264);}; // LessEqual +SEQ_THREE_KEYS(KC_U, KC_O, KC_M){m_unicode(0x2265);}; // MoreEqual +SEQ_THREE_KEYS(KC_U, KC_O, KC_P){m_unicode(0x00B1);}; // Plusminus + +//Math +SEQ_THREE_KEYS(KC_U, KC_M, KC_P){m_unicode(0x220F);}; // Product +SEQ_THREE_KEYS(KC_U, KC_M, KC_S){m_unicode(0x2211);}; // Sum +SEQ_THREE_KEYS(KC_U, KC_M, KC_A){m_unicode(0x2248);}; // Almost +SEQ_THREE_KEYS(KC_U, KC_M, KC_E){m_unicode(0x2261);}; // Equivalent +SEQ_THREE_KEYS(KC_U, KC_M, KC_I){m_unicode(0x221E);}; // Infinity +SEQ_THREE_KEYS(KC_U, KC_M, KC_M){m_unicode(0x2030);}; // Mille + +//Set +SEQ_THREE_KEYS(KC_U, KC_S, KC_S){m_unicode(0x2282);}; Subset +SEQ_THREE_KEYS(KC_U, KC_S, KC_P){m_unicode(0x2283);}; suPerset +SEQ_THREE_KEYS(KC_U, KC_S, KC_I){m_unicode(0x2229);}; Intersection +SEQ_THREE_KEYS(KC_U, KC_S, KC_U){m_unicode(0x222A);}; Union +SEQ_THREE_KEYS(KC_U, KC_S, KC_E){m_unicode(0x2208);}; Element +SEQ_THREE_KEYS(KC_U, KC_S, KC_N){m_unicode(0x2209);}; Notelement +SEQ_THREE_KEYS(KC_U, KC_S, KC_C){m_unicode(0x220D);}; Contains +SEQ_THREE_KEYS(KC_U, KC_S, KC_D){m_unicode(0x220C);}; doesNotcontain + +//Logic +SEQ_THREE_KEYS(KC_U, KC_L, KC_N){m_unicode(0x00AC);}; // Not +SEQ_THREE_KEYS(KC_U, KC_L, KC_A){m_unicode(0x2227);}; // And +SEQ_THREE_KEYS(KC_U, KC_L, KC_O){m_unicode(0x2228);}; // Or +SEQ_THREE_KEYS(KC_U, KC_L, KC_E){m_unicode(0x2203);}; // Exists +SEQ_THREE_KEYS(KC_U, KC_L, KC_N){m_unicode(0x2204);}; // Notexists + +//Greek +SEQ_THREE_KEYS(KC_U, KC_G, KC_M){m_unicode(0x00B5);}; // Micro +SEQ_THREE_KEYS(KC_U, KC_G, KC_L){m_unicode(0x03BB);}; // Lamda +SEQ_THREE_KEYS(KC_U, KC_G, KC_O){m_unicode(0x2126);}; // Omega +SEQ_THREE_KEYS(KC_U, KC_G, KC_A){m_unicode(0x03B1);}; // Alpha +SEQ_THREE_KEYS(KC_U, KC_G, KC_B){m_unicode(0x03B2);}; // Beta +SEQ_THREE_KEYS(KC_U, KC_G, KC_G){m_unicode(0x03B3);}; // Gamma +SEQ_THREE_KEYS(KC_U, KC_G, KC_P){m_unicode(0x03C0);}; // Pi +SEQ_THREE_KEYS(KC_U, KC_G, KC_D){m_unicode(0x03B4);}; // Delta + +//Zother +SEQ_THREE_KEYS(KC_U, KC_Z, KC_C){m_unicode(0x2601);}; // Cloud +SEQ_THREE_KEYS(KC_U, KC_Z, KC_S){m_unicode(0x263C);}; // Sun +SEQ_THREE_KEYS(KC_U, KC_Z, KC_R){m_unicode(0x2602);}; // Rain +SEQ_THREE_KEYS(KC_U, KC_Z, KC_K){m_unicode(0x2620);}; // sKull +SEQ_THREE_KEYS(KC_U, KC_Z, KC_R){m_unicode(0x267A);}; // rEcycle +SEQ_THREE_KEYS(KC_U, KC_Z, KC_U){m_unicode(0x1F44D);}; // thumbsUp +SEQ_THREE_KEYS(KC_U, KC_Z, KC_D){m_unicode(0x1F44E);}; // thumbsDown +SEQ_THREE_KEYS(KC_U, KC_Z, KC_P){m_unicode(0x1F4A9);}; // Poo diff --git a/keyboards/ergodox/keymaps/bryan/keymap.c b/keyboards/ergodox/keymaps/bryan/keymap.c new file mode 100644 index 0000000000..572cea8cda --- /dev/null +++ b/keyboards/ergodox/keymaps/bryan/keymap.c @@ -0,0 +1,226 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, + RGB_SLD +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------------. ,--------------------------------------------------------. + * | = | 1 | 2 | 3 | 4 | 5 | Cmd,Shft,[ | | Cmd,Shft,] | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------------| |------------+------+------+------+------+------+--------| + * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |BkSp/Cmd| A | S | D | F | G |------------| |------------| H | J | K | L |; / L2|' / Cmd | + * |--------+------+------+------+------+------| Hyper | | Meh |------+------+------+------+------+--------| + * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | + * `--------+------+------+------+------+-------------------' `-------------+------+------+------+------+--------' + * |Grv/L1| '" |AltShf| Left | Right| | Up | Down | [ | ] | ~L1 | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |Ctrl/Esc|PgUp| | App | LGui | + * ,------|------|------| |------+--------+------. + * | | | PgDn | | Home | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | Esc | | Alt | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, M(2), + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + GUI_T(KC_BSPC), KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT,KC_RGHT, + CTL_T(KC_ESC),KC_PGUP, + KC_PGDN, + KC_SPC,KC_BSPC, KC_ESC, + // right hand + M(3), KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_LALT,KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | <- | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, M(1), KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +// KC_COMM, KC_MINS + +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + case 1: + if (record->event.pressed) { // For resetting EEPROM + eeconfig_init(); + } + break; + } + return MACRO_NONE; +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case RGB_SLD: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode(1); + #endif + } + return false; + break; + } + return true; +} + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-base-layout.png b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-base-layout.png new file mode 100644 index 0000000000..4208c5189f Binary files /dev/null and b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-base-layout.png differ diff --git a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-1-symbols.png b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-1-symbols.png new file mode 100644 index 0000000000..ccda70e39a Binary files /dev/null and b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-1-symbols.png differ diff --git a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-2-media-and-mouse.png b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-2-media-and-mouse.png new file mode 100644 index 0000000000..481e63e324 Binary files /dev/null and b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-2-media-and-mouse.png differ diff --git a/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-3-navigation.png b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-3-navigation.png new file mode 100644 index 0000000000..9ebba67340 Binary files /dev/null and b/keyboards/ergodox/keymaps/deadcyclo/images/deadcyclo-layer-3-navigation.png differ diff --git a/keyboards/ergodox/keymaps/deadcyclo/readme.md b/keyboards/ergodox/keymaps/deadcyclo/readme.md index 9155074409..809dd6eb56 100644 --- a/keyboards/ergodox/keymaps/deadcyclo/readme.md +++ b/keyboards/ergodox/keymaps/deadcyclo/readme.md @@ -5,6 +5,32 @@ some common keys might be missing, as this layout is intented to be used on *nix with their system. The layout is geared towards avoiding using the rat (mouse for those of you who are unfamiliar with tiling window managers) as much as possibly. +# Layouts + +All layer images created using [keyboard-layout-editor](http://www.keyboard-layout-editor.com/) + +## Base layer + +[![Base layer](images/deadcyclo-base-layout.png)](http://www.keyboard-layout-editor.com/#/gists/0321b18620180a3e46c498206eb65366) + +## Layer 1 - Symbols + +[![Layer 1 - Symbols](images/deadcyclo-layer-1-symbols.png)](http://www.keyboard-layout-editor.com/#/gists/96714e198054c9115bafb5267cc6bc73) + +## Layer 2 - Media and Mouse + +[![Layer 2 - Media and Mouse](images/deadcyclo-layer-2-media-and-mouse.png)](http://www.keyboard-layout-editor.com/#/gists/824759486e378bcec30784309a7e5731) + +## Layer 3 - Navigation + +[![Layer 3 - Navigation](images/deadcyclo-layer-3-navigation.png)](http://www.keyboard-layout-editor.com/#/gists/67d9613dcd873c68693d11863d0fd289) + # Changelog - 02.01.2017 Added delete key on second layer +- 10.01.2017 Added layer images to readme + +# TODO + +- Add unicode support (direct input and indirect? see algernon layout for examples) +- Add descriptions below each layer image of any special functions/keys diff --git a/keyboards/kinesis/Makefile b/keyboards/kinesis/Makefile index 4e2a6f00fd..fbf05ca4a2 100644 --- a/keyboards/kinesis/Makefile +++ b/keyboards/kinesis/Makefile @@ -1,3 +1,5 @@ +SUBPROJECT_DEFAULT = alvicstep + ifndef MAKEFILE_INCLUDED include ../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/kinesis/alvicstep/Makefile b/keyboards/kinesis/alvicstep/Makefile new file mode 100644 index 0000000000..bd09e5885d --- /dev/null +++ b/keyboards/kinesis/alvicstep/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif diff --git a/keyboards/kinesis/alvicstep/alvicstep.c b/keyboards/kinesis/alvicstep/alvicstep.c new file mode 100644 index 0000000000..fba9f5136f --- /dev/null +++ b/keyboards/kinesis/alvicstep/alvicstep.c @@ -0,0 +1,105 @@ +#include "kinesis.h" + +// begin section origin https://github.com/alvicstep/tmk_keyboard + +void all_led_off(void) +{ + PORTD = 0b11111111; +} + +void all_led_on(void) +{ + PORTD = 0b00000000; +} +void num_lock_led_on(void) +{ + PORTD = 0b11101111; +} + +void caps_lock_led_on(void) +{ + PORTD = 0b01111111; +} + +void scroll_lock_led_on(void) +{ + PORTD = 0b11011111; +} +void keypad_led_on(void) +{ + PORTD = 0b10111111; +} +void blink_all_leds(void) +{ + all_led_on(); + _delay_ms(500); + + all_led_off(); + _delay_ms(100); + + caps_lock_led_on(); + _delay_ms(100); + + num_lock_led_on(); + _delay_ms(100); + + scroll_lock_led_on(); + _delay_ms(100); + + keypad_led_on(); + _delay_ms(100); + + //back + + scroll_lock_led_on(); + _delay_ms(100); + + num_lock_led_on(); + _delay_ms(100); + + caps_lock_led_on(); + _delay_ms(100); + + all_led_off(); +} + +// End section origin https://github.com/alvicstep/tmk_keyboard + + void matrix_init_kb(void) { + blink_all_leds(); + matrix_init_user(); +} + + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + +//Copyright 2014 Warren Janssens + uint8_t leds = 0xF0; + if (usb_led & 1 << USB_LED_NUM_LOCK) + leds &= ~0x10; + if (usb_led & 1 << USB_LED_CAPS_LOCK) + leds &= ~0x80; + if (usb_led & 1 << USB_LED_SCROLL_LOCK) + leds &= ~0x20; + PORTD = (PORTD & 0x0F) | leds; + + led_set_user(usb_led); + +} + + diff --git a/keyboards/kinesis/alvicstep/alvicstep.h b/keyboards/kinesis/alvicstep/alvicstep.h new file mode 100644 index 0000000000..f91a523148 --- /dev/null +++ b/keyboards/kinesis/alvicstep/alvicstep.h @@ -0,0 +1,67 @@ +#ifndef KINESIS_ALVICSTEP_H +#define KINESIS_ALVICSTEP_H + +#include "../kinesis.h" + + +#define KEYMAP( \ + k02,k22,k12,k01,k21,k11,k00,k20,k10, \ + k80,k70,k60,k50,k40,k30, \ + k81,k71,k61,k51,k41,k31, \ + k82,k72,k62,k52,k42,k32, \ + k83,k73,k63,k53,k43,k33, \ + k74,k64,k54,k34, \ + k36,k35, \ + k55, \ + k56,k46,k75, \ + k03,k23,k13,k04,k24,k14,k05,k85,k84, \ + k94,kA4,kB4,kD4,kE4,kF4, \ + k95,kA5,kB5,kD5,kE5,kF5, \ + k96,kA6,kB6,kD6,kE6,kF6, \ + k97,kA7,kB7,kD7,kE7,kF7, \ + k93,kB3,kD3,kE3, \ + k47,k66, \ + k67, \ + k87,k76,k86 \ +) { \ + { k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \ + { k10, k11, k12, k13, k14, KC_NO, KC_NO, KC_NO }, \ + { k20, k21, k22, k23, k24, KC_NO, KC_NO, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36, KC_NO }, \ + { k40, k41, k42, k43, KC_NO, KC_NO, k46, k47 }, \ + { k50, k51, k52, k53, k54, k55, k56, KC_NO }, \ + { k60, k61, k62, k63, k64, KC_NO, k66, k67 }, \ + { k70, k71, k72, k73, k74, k75, k76, KC_NO }, \ + { k80, k81, k82, k83, k84, k85, k86, k87}, \ + { KC_NO, KC_NO ,KC_NO ,k93, k94, k95, k96, k97}, \ + { KC_NO, KC_NO ,KC_NO ,KC_NO, kA4, kA5, kA6, kA7}, \ + { KC_NO, KC_NO ,KC_NO ,kB3, kB4, kB5, kB6, kB7}, \ + { KC_NO, KC_NO ,KC_NO ,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, \ + { KC_NO, KC_NO ,KC_NO ,kD3, kD4, kD5, kD6, kD7}, \ + { KC_NO, KC_NO ,KC_NO ,kE3, kE4, kE5, kE6, kE7}, \ + { KC_NO, KC_NO ,KC_NO ,KC_NO, kF4, kF5, kF6, kF7} \ +} + + +/* Row pin configuration +PF0 A +PF1 B +PF2 C +PF3 G 0 = U4, 1 = U5 + + + r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 rA rB rC rD rE rF +PB0 c0| f6 f8 f7 5 4 3 2 1 =+ +PB1 c1| f3 f5 f4 t r e w q TAB +PB2 c2| ESC f2 f1 g f d s a CL +PB3 c3| f9 f11 f10 b v c x z LS UP DN [{ ]} +PB4 c4| f12 SL PS RT LT §± `~ 6 7 8 9 0 -_ +PB5 c5| PB PGM KPD y u i o p \ +PB6 c6| LC DL BS RC EN SP h j k l ;: '" +PB7 c7| RA PU PD n m ,< .> /? RS + */ + + + + +#endif diff --git a/keyboards/kinesis/alvicstep/config.h b/keyboards/kinesis/alvicstep/config.h new file mode 100644 index 0000000000..88b7e2644a --- /dev/null +++ b/keyboards/kinesis/alvicstep/config.h @@ -0,0 +1,35 @@ +#ifndef ALVICSTEP_CONFIG_H +#define ALVICSTEP_CONFIG_H + +#include "../config.h" + +/* USB Device descriptor parameter */ +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 + +/* key matrix size */ +#define MATRIX_ROWS 16 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +//Passed through the port multipler, so 4 pins =16 +#define MATRIX_ROW_PINS { F0,F1, F2, F3 } + +// May be upside down. +#define MATRIX_COL_PINS { B0,B1, B2, B3, B4, B5, B6, B7 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + + +#endif diff --git a/keyboards/kinesis/docs/kicad/kinesis-cache.lib b/keyboards/kinesis/alvicstep/docs/kicad/kinesis-cache.lib similarity index 100% rename from keyboards/kinesis/docs/kicad/kinesis-cache.lib rename to keyboards/kinesis/alvicstep/docs/kicad/kinesis-cache.lib diff --git a/keyboards/kinesis/docs/kicad/kinesis.pro b/keyboards/kinesis/alvicstep/docs/kicad/kinesis.pro similarity index 100% rename from keyboards/kinesis/docs/kicad/kinesis.pro rename to keyboards/kinesis/alvicstep/docs/kicad/kinesis.pro diff --git a/keyboards/kinesis/docs/kicad/kinesis.sch b/keyboards/kinesis/alvicstep/docs/kicad/kinesis.sch similarity index 100% rename from keyboards/kinesis/docs/kicad/kinesis.sch rename to keyboards/kinesis/alvicstep/docs/kicad/kinesis.sch diff --git a/keyboards/kinesis/docs/photos/P1050573.jpg b/keyboards/kinesis/alvicstep/docs/photos/P1050573.jpg similarity index 100% rename from keyboards/kinesis/docs/photos/P1050573.jpg rename to keyboards/kinesis/alvicstep/docs/photos/P1050573.jpg diff --git a/keyboards/kinesis/docs/photos/P1050574.jpg b/keyboards/kinesis/alvicstep/docs/photos/P1050574.jpg similarity index 100% rename from keyboards/kinesis/docs/photos/P1050574.jpg rename to keyboards/kinesis/alvicstep/docs/photos/P1050574.jpg diff --git a/keyboards/kinesis/docs/photos/P1050575.jpg b/keyboards/kinesis/alvicstep/docs/photos/P1050575.jpg similarity index 100% rename from keyboards/kinesis/docs/photos/P1050575.jpg rename to keyboards/kinesis/alvicstep/docs/photos/P1050575.jpg diff --git a/keyboards/kinesis/docs/readme.txt b/keyboards/kinesis/alvicstep/docs/readme.txt similarity index 100% rename from keyboards/kinesis/docs/readme.txt rename to keyboards/kinesis/alvicstep/docs/readme.txt diff --git a/keyboards/kinesis/docs/schematic.png b/keyboards/kinesis/alvicstep/docs/schematic.png similarity index 100% rename from keyboards/kinesis/docs/schematic.png rename to keyboards/kinesis/alvicstep/docs/schematic.png diff --git a/keyboards/kinesis/matrix.c b/keyboards/kinesis/alvicstep/matrix.c similarity index 100% rename from keyboards/kinesis/matrix.c rename to keyboards/kinesis/alvicstep/matrix.c diff --git a/keyboards/kinesis/alvicstep/readme.md b/keyboards/kinesis/alvicstep/readme.md new file mode 100644 index 0000000000..974e42e506 --- /dev/null +++ b/keyboards/kinesis/alvicstep/readme.md @@ -0,0 +1,46 @@ +kinesis-advantage keyboard firmware +====================== + +This directory is called alvicstep because https://github.com/alvicstep did the heavy work and took the photos in the doc directory. +alvicstep did NOT do anything related to the QMK implementation, so don't bug him/her. + +There are other ways of replacing the CPU in the kinesis, this one uses jumper wires from the Teensy to the original DIP socket + + +## Kinesis specific information +This is a port of https://github.com/alvicstep/tmk_keyboard, +which is a fork of https://github.com/wjanssens/tmk_keyboard, +which is based on work from https://github.com/chrisandreae/keyboard-firmware + +If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK. +I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead. + +Not yet implemented: +- Kinesis EEProm reading or writing +- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7 + + + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: + +$ make keymap=[default|jack|] + +Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/kinesis/alvicstep/rules.mk b/keyboards/kinesis/alvicstep/rules.mk new file mode 100644 index 0000000000..fb421a34fc --- /dev/null +++ b/keyboards/kinesis/alvicstep/rules.mk @@ -0,0 +1,10 @@ +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +# just silently stop, since we need to upload with teensy uploader +upload: build + + + + diff --git a/keyboards/kinesis/config.h b/keyboards/kinesis/config.h index 8f1fdbdb6c..7cb0532c64 100644 --- a/keyboards/kinesis/config.h +++ b/keyboards/kinesis/config.h @@ -22,58 +22,22 @@ along with this program. If not, see . /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 #define MANUFACTURER You #define PRODUCT kinesis-advantage #define DESCRIPTION A custom keyboard // Mouse -#define MOUSEKEY_DELAY 20 +#define MOUSEKEY_DELAY 60 #define MOUSEKEY_INTERVAL 20 #define MOUSEKEY_MAX_SPEED 4 -#define MOUSEKEY_TIME_TO_MAX 20 +#define MOUSEKEY_TIME_TO_MAX 10 #define MOUSEKEY_WHEEL_MAX_SPEED 1 #define MOUSEKEY_WHEEL_DELTA 1 #define MOUSEKEY_WHEEL_TIME_TO_MAX 1 -/* key matrix size */ -#define MATRIX_ROWS 16 -#define MATRIX_COLS 8 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -//Passed through the port multipler, so 4 pins =16 -#define MATRIX_ROW_PINS { F0,F1, F2, F3 } - -// May be upside down. -#define MATRIX_COL_PINS { B0,B1, B2, B3, B4, B5, B6, B7 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -171,4 +135,13 @@ along with this program. If not, see . //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION + + +#ifdef SUBPROJECT_alvicstep + #include "alvicstep/config.h" +#endif +#ifdef SUBPROJECT_stapelberg + #include "stapelberg/config.h" +#endif + #endif diff --git a/keyboards/kinesis/keymaps/default/keymap.c b/keyboards/kinesis/keymaps/default/keymap.c index 3bf80699ce..01a66b5e5a 100644 --- a/keyboards/kinesis/keymaps/default/keymap.c +++ b/keyboards/kinesis/keymaps/default/keymap.c @@ -1,10 +1,6 @@ #include "kinesis.h" -#include "action_layer.h" -#define QWERTY 0 // Base qerty -#define SYMB 1// Symbol layer - -// An almost entirely blank keymap. Test layers with the upper right hand key - 1 in normal mode, reset in layer 2. +#define QWERTY 0 // Base qwerty /**************************************************************************************************** @@ -33,7 +29,6 @@ * `--------------------' `--------------------' */ - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [QWERTY] = KEYMAP( KC_ESC, KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8, @@ -45,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL,KC_LALT, KC_HOME, KC_BSPC,KC_DEL ,KC_END , - KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_FN0, KC_1, + KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_FN0, KC_1, KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_MINS, KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS, KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN,KC_QUOT, @@ -54,32 +49,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_RGUI,KC_RCTL, KC_PGUP, KC_PGDN,KC_ENTER ,KC_SPC - ), -[SYMB] = KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0, RESET, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS ) }; -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_TAP_TOGGLE(SYMB) , // FN1 - Momentary Layer 1 (Symbols) +const uint16_t PROGMEM fn_actions[] = { }; diff --git a/keyboards/kinesis/keymaps/programmer/Makefile b/keyboards/kinesis/keymaps/dvorak/Makefile similarity index 100% rename from keyboards/kinesis/keymaps/programmer/Makefile rename to keyboards/kinesis/keymaps/dvorak/Makefile diff --git a/keyboards/kinesis/keymaps/programmer/config.h b/keyboards/kinesis/keymaps/dvorak/config.h similarity index 100% rename from keyboards/kinesis/keymaps/programmer/config.h rename to keyboards/kinesis/keymaps/dvorak/config.h diff --git a/keyboards/kinesis/keymaps/dvorak/keymap.c b/keyboards/kinesis/keymaps/dvorak/keymap.c new file mode 100644 index 0000000000..9008bc8086 --- /dev/null +++ b/keyboards/kinesis/keymaps/dvorak/keymap.c @@ -0,0 +1,93 @@ +#include "kinesis.h" + +#define _DVORAK 0 // Base Dvorak layer +#define _MEDIA 1 // Media layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_DVORAK] = KEYMAP( + // left hand + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, + KC_BSPC, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, + KC_ESC, KC_LBRC, KC_DOWN, KC_UP, + // left thumb + KC_LGUI, KC_LCTL, + KC_LALT, + KC_BSPC, KC_DEL, TG(_MEDIA), + // right hand + KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_FN0, KC_1, + KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, + KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, + KC_LEFT, KC_RIGHT, KC_RBRC, KC_BSLS, + // right thumb + KC_RCTL, KC_RGUI, + KC_RALT, + TG(_MEDIA), KC_ENT, KC_SPC + ), + +[_MEDIA] = KEYMAP( + // left hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_BTN4, KC_BTN3, KC_BTN2, KC_BTN1, KC_NO, + KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, + KC_NO, KC_NO, KC_MS_D, KC_MS_U, + // left thumb + KC_NO, KC_NO, + KC_NO, + KC_NO, KC_NO, KC_TRNS, + // right hand + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_POWER, + KC_NO, KC_VOLU, KC_MS_U, KC_VOLD, KC_NO, KC_NO, + KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_NO, + KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, KC_NO, + KC_MS_L, KC_MS_R, KC_NO, KC_NO, + // right thumb + KC_NO, KC_NO, + KC_NO, + KC_TRNS, KC_ENT, KC_NO +) +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kinesis/keymaps/milestogo/Makefile b/keyboards/kinesis/keymaps/milestogo/Makefile new file mode 100644 index 0000000000..9d3df5964f --- /dev/null +++ b/keyboards/kinesis/keymaps/milestogo/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/kinesis/keymaps/milestogo/config.h b/keyboards/kinesis/keymaps/milestogo/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/kinesis/keymaps/milestogo/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/kinesis/keymaps/programmer/keymap.c b/keyboards/kinesis/keymaps/milestogo/keymap.c similarity index 56% rename from keyboards/kinesis/keymaps/programmer/keymap.c rename to keyboards/kinesis/keymaps/milestogo/keymap.c index 83fb7bd5f5..c2635eefe4 100644 --- a/keyboards/kinesis/keymaps/programmer/keymap.c +++ b/keyboards/kinesis/keymaps/milestogo/keymap.c @@ -2,10 +2,10 @@ #include "action_layer.h" #include "mousekey.h" -#define QWERTY 0 // Base qerty -#define SYMB 1// Symbol layer -#define MOUSE 2// - +#define _QWERTY 0 // Base qerty +#define _SYMB 1// Symbol layer +#define _MOUSE 2// +#define _TRANS 3// @@ -20,27 +20,26 @@ enum { }; -// Borrowing very heavily from -// https://github.com/alvicstep/tmk_keyboard +// Why so many gui keys, why not just map all the OS X stuff to buttons? Good question. /**************************************************************************************************** * * Keymap: Default Layer in Qwerty * * ,-------------------------------------------------------------------------------------------------------------------. -* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F8 | F9 | F10 | F12 | FN0 | FN1 | FN2 | | bOOT | +* | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F8 | F9 | F10 | F12 | FN0 | FN1 | FN2 | | bOOT | * |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------| * | =+ | 1! | 2@ | 3# | 4$ | 5% | | 6^ | 7& | 8* | 9( | 0) | -_ | * |--------+------+------+------+------+------| +------+------+------+------+------+--------| * | Tab | Q | W | E | R | T | | Y | U | I | O | P | \| | * |--------+------+------+------+------+------| |------+------+------+------+------+--------| -* |MouseFN1| A | S | D | F | G | | H | J | K | L | ;: | '" | +* |MouseFN0| A | S | D | F | G | | H | J | K | L | ;: | '" | * |--------+------+------+------+------+------| |------+------+------+------+------+--------| * | Shift | Z | X | C | V | B | | N | M | ,. | .> | /? | Shift | * `--------+------+------+------+------+------- `------+------+------+------+------+--------' -* | `~ | ESC |MOUSE1|MOUSE2| | [{ | ]} | ESC | GUI | +* | ~` | ESC |GUI/L |L1/RT | | L1/UP|GUI/DN| [{ | ]} | * `---------------------------' `---------------------------' * ,-------------. ,-------------. -* | Ctrl | Alt | | Gui | Ctrl | +* | CTRL | GUI | | ALT | GUI | * ,------|------|------| |------+------+------. * | | | Home | | PgUp | | | * | BkSp | Del |------| |------|Return| Space| @@ -48,16 +47,15 @@ enum { * `--------------------' `--------------------' */ - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[QWERTY] = KEYMAP( +[_QWERTY] = KEYMAP( KC_ESC, KC_F1 ,KC_F2 ,KC_F3 ,KC_F4 ,KC_F5 ,KC_F6 ,KC_F7 ,KC_F8, KC_EQL, KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 , KC_TAB, KC_Q ,KC_W ,KC_E ,KC_R ,KC_T , - KC_FN1 ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G , + KC_FN0 ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G , KC_LSFT,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B , - KC_GRV ,KC_ESC, KC_BTN1,KC_BTN2, - KC_LCTL,KC_LALT, + KC_GRAVE, KC_ESC, KC_FN4, KC_FN5, + KC_LCTL,KC_LGUI, KC_HOME, KC_BSPC,KC_DEL ,KC_FN0 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_FN0 ,KC_FN1 ,KC_FN2, KC_NO, RESET, @@ -65,18 +63,45 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS, KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN,KC_QUOT, KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_RSFT, - KC_LBRC,KC_RBRC, KC_ESC, KC_RGUI, - KC_RGUI,KC_RCTL, + KC_FN6, KC_FN7, KC_LBRC ,KC_RBRC, + KC_RALT,KC_RGUI, KC_PGUP, KC_PGDN,KC_ENTER ,KC_SPC ), -[SYMB] = KEYMAP( + +/* _SYMBol level +* +* ,-------------------------------------------------------------------------------------------------------------------. +* | | | | | | | | | | | | | | | | bOOT | +* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------| +* | | | * | # | | | | | | | | | | +* |--------+------+------+------+------+------| +------+------+------+------+------+--------| +* | | / | [ | ] | | | | | | | | | | +* |--------+------+------+------+------+------| |------+------+------+------+------+--------| +* | | | { | } | | | | | | | | | | +* |--------+------+------+------+------+------| |------+------+------+------+------+--------| +* | | = | ( | ) | | | | | | | | | | +* `--------+------+------+------+------+------- `------+------+------+------+------+--------' +* | | |GUI/L |L1/RT | | L1/UP|GUI/DN| { | } | +* `---------------------------' `---------------------------' +* ,-------------. ,-------------. +* | CTRL | GUI | | ALT | GUI | +* ,------|------|------| |------+------+------. +* | | | Home | | PgUp | | | +* | BkSp | Del |------| |------|Mouse1|Mouse2| +* | | | End | | PgDn |LClick|Rclick| +* `--------------------' `--------------------' +*/ + + + +[_SYMB] = KEYMAP( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_ASTR, KC_HASH, KC_TRNS, KC_TRNS, + KC_TRNS, KC_SLSH, KC_LBRC, KC_RBRC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RSFT(KC_LBRC), RSFT(KC_RBRC), KC_TRNS, KC_TRNS, + KC_TRNS, KC_EQL, RSFT(KC_9), RSFT(KC_0), KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_FN4, KC_FN5, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -85,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_FN6, KC_FN7, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS @@ -103,10 +128,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| |------+------+------+------+------+--------| * | | GuiZ | GUI X| GUI C| GUI_V|PgDown| | MWD | MDown|MS Dwn|MS_DR | ? | | * `--------+------+------+------+------+------- `------+------+------+------+------+--------' -* | `~ | ESC | < | > | | { | } | ESC | | +* | `~ | ESC | | | | | | { | } | * `---------------------------' `---------------------------' * ,-------------. ,-------------. -* | Ctrl | Alt | | Gui | Ctrl | +* | CTRL | GUI | | ALT | GUI | * ,------|------|------| |------+------+------. * | | | Home | | PgUp | | | * | BkSp | Del |------| |------|Mouse1|Mouse2| @@ -115,13 +140,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ -[MOUSE] = KEYMAP( +[_MOUSE] = KEYMAP( KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_EXLM ,KC_AT, KC_HASH, KC_DLR ,KC_PERC , KC_TRNS, KC_NO, KC_NO, KC_UP, KC_NO, KC_PGUP, KC_FN1, LCTL(KC_A),KC_LEFT, KC_DOWN, KC_RIGHT, LCTL(KC_E), KC_TRNS, LGUI(KC_Z),LGUI(KC_X),LGUI(KC_C),LGUI(KC_V),KC_PGDN, - KC_TRNS, KC_TRNS, KC_LABK, KC_RABK, + KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -129,22 +154,77 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_ACL2, KC_WH_U, M(A_MUL), KC_MS_U, M(A_MUR), KC_NO, KC_ACL1, KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_ACL0, - KC_WH_D, M(A_MDL), KC_MS_D, M(A_MDR), KC_TRNS, KC_TRNS, - KC_LCBR, KC_RCBR, KC_ESC, KC_TRNS, + KC_WH_D, M(A_MDL), KC_MS_D, M(A_MDR), RSFT(KC_LBRC), RSFT(KC_RBRC), + KC_LCBR, KC_RCBR, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2 ), + +/* EMPTY +* +* ,-------------------------------------------------------------------------------------------------------------------. +* | | | | | | | | | | | | | | | | bOOT | +* |--------+------+------+------+------+------+---------------------------+------+------+------+------+------+--------| +* | | | | | | | | | | | | | | +* |--------+------+------+------+------+------| +------+------+------+------+------+--------| +* | | | | | | | | | | | | | | +* |--------+------+------+------+------+------| |------+------+------+------+------+--------| +* | | | | | | | | | | | | | | +* |--------+------+------+------+------+------| |------+------+------+------+------+--------| +* | | | | | | | | | | | | | | +* `--------+------+------+------+------+------- `------+------+------+------+------+--------' +* | | | | | | | | | | +* `---------------------------' `---------------------------' +* ,-------------. ,-------------. +* | Ctrl | Alt | | Gui | Ctrl | +* ,------|------|------| |------+------+------. +* | | | Home | | PgUp | | | +* | BkSp | Del |------| |------|Mouse1|Mouse2| +* | | | End | | PgDn |LClick|Rclick| +* `--------------------' `--------------------' +*/ + + + +[_TRANS] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_FN10, KC_FN11, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_FN0, KC_2, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS + ), + + }; -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_TAP_TOGGLE(MOUSE) , // FN1 - Momentary Layer 1 (Symbols) - [1] = ACTION_LAYER_TOGGLE(MOUSE) , // FN1 - Momentary Layer 1 (Symbols) - [2] = ACTION_LAYER_TAP_TOGGLE(SYMB) , // FN1 - Momentary Layer 1 (Symbols) +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_TAP_TOGGLE(_MOUSE) , + [1] = ACTION_LAYER_TOGGLE(_MOUSE) , + [2] = ACTION_LAYER_TAP_TOGGLE(_SYMB) , + [5]= ACTION_LAYER_TAP_KEY(_SYMB,KC_RIGHT), + [4]= ACTION_MODS_TAP_KEY(MOD_LGUI,KC_LEFT), + [6]= ACTION_LAYER_TAP_KEY(_SYMB,KC_UP), + [7]= ACTION_MODS_TAP_KEY(MOD_LGUI,KC_DOWN), + + }; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) @@ -214,18 +294,23 @@ void matrix_init_user(void) { } void matrix_scan_user(void) { + +#ifdef ALVICSTEP_CONFIG_H int8_t layer = biton32(layer_state); switch (layer) { case 1: - all_led_off(); - break; - case 2: if (!(host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK))) { all_led_off(); caps_lock_led_on(); } break; + + case 2: + if (!(host_keyboard_leds() & (1 << USB_LED_SCROLL_LOCK))) { + all_led_off(); + scroll_lock_led_on(); + } case 0: all_led_off(); num_lock_led_on(); @@ -233,6 +318,7 @@ void matrix_scan_user(void) { default: break; } +#endif } diff --git a/keyboards/kinesis/keymaps/programmer/readme.md b/keyboards/kinesis/keymaps/milestogo/readme.md similarity index 100% rename from keyboards/kinesis/keymaps/programmer/readme.md rename to keyboards/kinesis/keymaps/milestogo/readme.md diff --git a/keyboards/kinesis/kinesis.c b/keyboards/kinesis/kinesis.c index 1fee90e6f9..7a6a1be544 100644 --- a/keyboards/kinesis/kinesis.c +++ b/keyboards/kinesis/kinesis.c @@ -1,106 +1 @@ #include "kinesis.h" - -// begin section origin https://github.com/alvicstep/tmk_keyboard - - -void all_led_off(void) -{ - PORTD = 0b11111111; -} - -void all_led_on(void) -{ - PORTD = 0b00000000; -} -void num_lock_led_on(void) -{ - PORTD = 0b11101111; -} - -void caps_lock_led_on(void) -{ - PORTD = 0b01111111; -} - -void scroll_lock_led_on(void) -{ - PORTD = 0b11011111; -} -void keypad_led_on(void) -{ - PORTD = 0b10111111; -} -void blink_all_leds(void) -{ - all_led_on(); - _delay_ms(500); - - all_led_off(); - _delay_ms(100); - - caps_lock_led_on(); - _delay_ms(100); - - num_lock_led_on(); - _delay_ms(100); - - scroll_lock_led_on(); - _delay_ms(100); - - keypad_led_on(); - _delay_ms(100); - - //back - - scroll_lock_led_on(); - _delay_ms(100); - - num_lock_led_on(); - _delay_ms(100); - - caps_lock_led_on(); - _delay_ms(100); - - all_led_off(); -} - -// End section origin https://github.com/alvicstep/tmk_keyboard - - void matrix_init_kb(void) { - blink_all_leds(); - matrix_init_user(); -} - - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - -//Copyright 2014 Warren Janssens - uint8_t leds = 0xF0; - if (usb_led & 1 << USB_LED_NUM_LOCK) - leds &= ~0x10; - if (usb_led & 1 << USB_LED_CAPS_LOCK) - leds &= ~0x80; - if (usb_led & 1 << USB_LED_SCROLL_LOCK) - leds &= ~0x20; - PORTD = (PORTD & 0x0F) | leds; - - led_set_user(usb_led); - -} - - diff --git a/keyboards/kinesis/kinesis.h b/keyboards/kinesis/kinesis.h index c04fbda155..66713731fa 100644 --- a/keyboards/kinesis/kinesis.h +++ b/keyboards/kinesis/kinesis.h @@ -1,67 +1,23 @@ #ifndef KINESIS_H #define KINESIS_H -#include "quantum.h" - - -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array +#ifdef SUBPROJECT_alvicstep + #include "alvicstep.h" +#endif +#ifdef SUBPROJECT_stapelberg + #include "stapelberg.h" +#endif -#define KEYMAP( \ - k02,k22,k12,k01,k21,k11,k00,k20,k10, \ - k80,k70,k60,k50,k40,k30, \ - k81,k71,k61,k51,k41,k31, \ - k82,k72,k62,k52,k42,k32, \ - k83,k73,k63,k53,k43,k33, \ - k74,k64,k54,k34, \ - k36,k35, \ - k55, \ - k56,k46,k75, \ - k03,k23,k13,k04,k24,k14,k05,k85,k84, \ - k94,kA4,kB4,kD4,kE4,kF4, \ - k95,kA5,kB5,kD5,kE5,kF5, \ - k96,kA6,kB6,kD6,kE6,kF6, \ - k97,kA7,kB7,kD7,kE7,kF7, \ - k93,kB3,kD3,kE3, \ - k47,k66, \ - k67, \ - k87,k76,k86 \ -) { \ - { k00, k01, k02, k03, k04, k05, KC_NO, KC_NO }, \ - { k10, k11, k12, k13, k14, KC_NO, KC_NO, KC_NO }, \ - { k20, k21, k22, k23, k24, KC_NO, KC_NO, KC_NO }, \ - { k30, k31, k32, k33, k34, k35, k36, KC_NO }, \ - { k40, k41, k42, k43, KC_NO, KC_NO, k46, k47 }, \ - { k50, k51, k52, k53, k54, k55, k56, KC_NO }, \ - { k60, k61, k62, k63, k64, KC_NO, k66, k67 }, \ - { k70, k71, k72, k73, k74, k75, k76, KC_NO }, \ - { k80, k81, k82, k83, KC_NO ,KC_NO, k86, k87}, \ - { KC_NO, KC_NO ,KC_NO ,k93, k94, k95, k96, k97}, \ - { KC_NO, KC_NO ,KC_NO ,KC_NO, kA4, kA5, kA6, kA7}, \ - { KC_NO, KC_NO ,KC_NO ,kB3, kB4, kB5, kB6, kB7}, \ - { KC_NO, KC_NO ,KC_NO ,KC_NO, KC_NO, KC_NO, k84, k85}, \ - { KC_NO, KC_NO ,KC_NO ,kD3, kD4, kD5, kD6, kD7}, \ - { KC_NO, KC_NO ,KC_NO ,kE3, kE4, kE5, kE6, kE7}, \ - { KC_NO, KC_NO ,KC_NO ,KC_NO, kF4, kF5, kF6, kF7} \ -} +#include "quantum.h" -/* 4y0 A 4y1 B 4y2 4y3 D 4y4 E 4y5 F 4y6 G 4y7 H 5y0 I 5y1 J 5y2 K 5y3 L 5y4 M 5y5 N 5y6 O 5y7 P */ +void all_led_off(void); +void all_led_on(void); +void num_lock_led_on(void); +void caps_lock_led_on(void); +void scroll_lock_led_on(void); +void keypad_led_on(void); -/* - 0 1 2 3 4 5 6 7 8 9 A B C D E F - A B C D E F G H I J K L M N O P - 4y0 4y1 4y2 4y3 4y4 4y5 4y6 4y7 5y0 5y1 5y2 5y3 5y4 5y5 5y6 5y7 - r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15 -0 PB0 21 c0 f6 f8 f7 5 4 3 2 1 =+ -1 PB1 22 c1 f3 f5 f4 t r e w q TAB -2 PB2 23 c2 ESC f2 f1 g f d s a CL -3 PB3 24 c3 f9 f11 f10 b v c x z LS UP DN [{ ]} -4 PB4 25 c4 f12 SL PS RT LT §± `~ 6 7 8 9 0 -_ -5 PB5 26 c5 PB PGM KPD LA HM END y u i o p \ -6 PB6 27 c6 LC DEL BS RC ENT SP h j k l ;: '" -7 PB7 28 c7 RA PU PD n m ,< .> /? RS -*/ #endif diff --git a/keyboards/kinesis/readme.md b/keyboards/kinesis/readme.md index 79c86581e6..2813ee273b 100644 --- a/keyboards/kinesis/readme.md +++ b/keyboards/kinesis/readme.md @@ -1,42 +1,12 @@ -kinesis-advantage keyboard firmware -====================== +# Firmware for the Kinesis advantage keyboard -## Kinesis specific information -This is a port of https://github.com/alvicstep/tmk_keyboard, -which is a fork of https://github.com/wjanssens/tmk_keyboard, -which is based on work from https://github.com/chrisandreae/keyboard-firmware +There are at least two different ways to replace the controller in this keyboard. -If you replace the kinesis CPU as described in the doc folder, then this code should allow you to use QMK. -I've tested with a Teensy 2++, remember to change the CPU if you use a 32u4 instead. +The Stapelberg folder contains the docs and configuration for using the custom controller created by Michael Stapelberg. -Not yet implemented: -- Kinesis EEProm reading or writing -- Audio - this should be simple if we remove hardcoded pins from audio.h and switch to E7 +The alvicstep folder contains docs and configuration for directly wiring a Teensy2++ to the existing controller board. This follows the pinouts described in https://github.com/alvicstep/tmk_keyboard, which is where the name comes from. +## Keymaps +Both hardware solutions should work with the same keymaps -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/kinesis-advantage folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|] -``` - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` diff --git a/keyboards/kinesis/stapelberg/Makefile b/keyboards/kinesis/stapelberg/Makefile new file mode 100644 index 0000000000..bd09e5885d --- /dev/null +++ b/keyboards/kinesis/stapelberg/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif diff --git a/keyboards/kinesis/stapelberg/config.h b/keyboards/kinesis/stapelberg/config.h new file mode 100644 index 0000000000..0677e0adeb --- /dev/null +++ b/keyboards/kinesis/stapelberg/config.h @@ -0,0 +1,50 @@ +#ifndef STAPELBERG_CONFIG_H +#define STAPELBERG_CONFIG_H + +#include "../config.h" + +/* USB Device descriptor parameter */ +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0002 + +/* key matrix size */ +#define MATRIX_ROWS 15 +#define MATRIX_COLS 7 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5, D6, D7, C0, C1, C2, C3, C4, C5, C6 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* don't know if this should be defined at the board or top level. Assuming board +#define MOUSEKEY_DELAY 100 +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_MAX_SPEED 3 +#define MOUSEKEY_TIME_TO_MAX 10 +*/ + +#define IGNORE_MOD_TAP_INTERRUPT + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + +#endif diff --git a/keyboards/kinesis/stapelberg/images/controller_board.jpg b/keyboards/kinesis/stapelberg/images/controller_board.jpg new file mode 100644 index 0000000000..b18f76f7ef Binary files /dev/null and b/keyboards/kinesis/stapelberg/images/controller_board.jpg differ diff --git a/keyboards/kinesis/stapelberg/images/exterior_reset.jpg b/keyboards/kinesis/stapelberg/images/exterior_reset.jpg new file mode 100644 index 0000000000..6edda81306 Binary files /dev/null and b/keyboards/kinesis/stapelberg/images/exterior_reset.jpg differ diff --git a/keyboards/kinesis/stapelberg/images/teensy_detail.jpg b/keyboards/kinesis/stapelberg/images/teensy_detail.jpg new file mode 100644 index 0000000000..12e6c1c8ae Binary files /dev/null and b/keyboards/kinesis/stapelberg/images/teensy_detail.jpg differ diff --git a/keyboards/kinesis/stapelberg/readme.md b/keyboards/kinesis/stapelberg/readme.md new file mode 100644 index 0000000000..b04a0bd49c --- /dev/null +++ b/keyboards/kinesis/stapelberg/readme.md @@ -0,0 +1,55 @@ +# kinesis_stapelberg keyboard firmware + +This folder contains the firmware customization required to run QMK on the custom controller for the Kinesis Advantage created by Michael Stapelberg. +It differs from the `alvicstep keyboard in that the existing QMK Kinesis Advantage project uses the existing controller board provided by Kinesis. + +The controller board hardware is described +[here](http://michael.stapelberg.de/Artikel/kinesis_custom_controller) + +Mapping the pin assignments was done using the corresponding matrix description provided at this +[link](https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec) + +This code makes no attempt to drive the four LEDs provided on the controller board. + + +## Building the Hardware + +If you want to perform this customization, these parts may be helpful. + +| Function | Quantity | Vendor | Part Number | +| ------------------------------------------------------ | -------- | ------- | ------------ | +| 13 pin connector for function keys and finger keywells | 4 | Digi-Key | WM14526-ND | +| 10 pin headers for thumb clusters | 4 | Digi-Key | 609-3250-ND | +| 8 pin cable for thumb clusters | 2 | Digi-Key | SAM8928-ND | +| Teensy++ 2.0 | 1 | Digi-Key | 1528-1056-ND | +| 2 pin right angle header for reset | 1 | Digi-Key | 3M9467-ND | +| Reset cables | 2 | Sparkfun | PRT-09140 | + +The board and connections are shown here +![](images/controller_board.jpg) + +The Teensy mounting detail can be seen here. +I used a socket for prototyping. +![](images/teensy_detail.jpg) + + +Since the proper mounting of the Teensy board places the reset button in a tight space, I added a 2-pin header to the reset and ground pins on the edge of the board. +Shorting these two pins together will reset the board. +I also put female to male header jumper cables on these so they could be accessed outside the enclosure. +The exterior cables can be seen here. +![](images/exterior_reset.jpg) + + +## Keymaps + +### Default + +To build with the default keymap, run `make default` while in the +`kinesis_stapelberg` working directory. + +### Dvorak + +This keymap contains a dvorak implementation as well as media and symbol layers. + +Run `make dvorak` while in the `kinesis_stapelberg` working directory. + diff --git a/keyboards/kinesis/stapelberg/rules.mk b/keyboards/kinesis/stapelberg/rules.mk new file mode 100644 index 0000000000..fb421a34fc --- /dev/null +++ b/keyboards/kinesis/stapelberg/rules.mk @@ -0,0 +1,10 @@ +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +# just silently stop, since we need to upload with teensy uploader +upload: build + + + + diff --git a/keyboards/kinesis/stapelberg/stapelberg.c b/keyboards/kinesis/stapelberg/stapelberg.c new file mode 100644 index 0000000000..111db81feb --- /dev/null +++ b/keyboards/kinesis/stapelberg/stapelberg.c @@ -0,0 +1,28 @@ +#include "stapelberg.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/kinesis/stapelberg/stapelberg.h b/keyboards/kinesis/stapelberg/stapelberg.h new file mode 100644 index 0000000000..c90fc3d52d --- /dev/null +++ b/keyboards/kinesis/stapelberg/stapelberg.h @@ -0,0 +1,72 @@ +#ifndef KINESIS_STAPELBERG_H +#define KINESIS_STAPELBERG_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments as on the physical keyboard +// The second converts the arguments into the 2-D scanned array + +#define KEYMAP( \ + kC0,kD0,kE0,kC1,kD1,kE1,kC2,kD2,kE2, \ + k00,k10,k20,k30,k40,k50, \ + k01,k11,k21,k31,k41,k51, \ + k02,k12,k22,k32,k42,k52, \ + k03,k13,k23,k33,k43,k53, \ + k14,k24,k34,k54, \ + k56,k55, \ + k35, \ + k36,k46,k25, \ + kC3,kD3,kE3,kC4,kD4,kE4,kC5,kE5,kD5, \ + k60,k70,k80,k90,kA0,kB0, \ + k61,k71,k81,k91,kA1,kB1, \ + k62,k72,k82,k92,kA2,kB2, \ + k63,k73,k83,k93,kA3,kB3, \ + k64,k84,k94,kA4, \ + k96,k85, \ + k86, \ + k66,k75,k65 \ +) { \ + { k00, k01, k02, k03, KC_NO, KC_NO, KC_NO }, \ + { k10, k11, k12, k13, k14, KC_NO, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36 }, \ + { k40, k41, k42, k43, KC_NO, KC_NO, k46 }, \ + { k50, k51, k52, k53, k54, k55, k56 }, \ + { k60, k61, k62, k63, k64, k65, k66 }, \ + { k70, k71, k72, k73, KC_NO, k75, KC_NO }, \ + { k80, k81, k82, k83, k84, k85, k86 }, \ + { k90, k91, k92, k93, k94, KC_NO, k96 }, \ + { kA0, kA1, kA2, kA3, kA4, KC_NO, KC_NO }, \ + { kB0, kB1, kB2, kB3, KC_NO, KC_NO, KC_NO }, \ + { kC0, kC1, kC2, kC3, kC4, kC5, KC_NO }, \ + { kD0, kD1, kD2, kD3, kD4, kD5, KC_NO }, \ + { kE0, kE1, kE2, kE3, kE4, kE5, KC_NO } \ +} + +/* +This is the Stapelberg matrix as published at +https://github.com/stapelberg/kinesis-firmware/blob/master/kb_kinesis/config.kspec +Along with the pins for each row and column + PB0 PB1 PB2 PB3 PB4 PB5 PB6 + kx0 kx1 kx2 kx3 kx4 kx5 kx6 +PD0 k0x Row: EQL TAB CAP LSH X2 -- -- +PD1 k1x Row: 1 Q A Z BQ -- -- +PD2 k2x Row: 2 W S X INS END -- +PD3 k3x Row: 3 E D C LFT HOM BAK +PD4 k4x Row: 4 R F V -- -- DEL +PD5 k5x Row: 5 T G B RT LAL LCT +PD6 k6x Row: 6 Y H N UP SPC PGD +PD7 k7x Row: 7 U J M -- RET -- +PB0 k8x Row: 8 I K COM DWN RCT PGU +PB1 k9x Row: 9 O L PER LBR -- RAL +PB2 kAx Row: 0 P SEM SLA RBR -- -- +PB3 kBx Row: MIN BSL APO RSH X1 -- -- +PB4 kCx Row: ESC F3 F6 F9 F12 PAU -- +PB5 kDx Row: F1 F4 F7 F10 PRT PRG -- +PB6 kEx Row: F2 F5 F8 F11 SLK KEY -- +*/ + + + +#endif diff --git a/keyboards/planck/keymaps/vifon/Makefile b/keyboards/planck/keymaps/vifon/Makefile index 53660a2e76..15a7b736fd 100644 --- a/keyboards/planck/keymaps/vifon/Makefile +++ b/keyboards/planck/keymaps/vifon/Makefile @@ -1,6 +1,3 @@ -# Please remove if no longer applicable -$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) -$(warning Please disable some options in the Makefile to resolve) # Build Options @@ -10,7 +7,7 @@ $(warning Please disable some options in the Makefile to resolve) BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality diff --git a/keyboards/planck/keymaps/vifon/config.h b/keyboards/planck/keymaps/vifon/config.h index 9cb0634fb3..a08b37cbe6 100644 --- a/keyboards/planck/keymaps/vifon/config.h +++ b/keyboards/planck/keymaps/vifon/config.h @@ -81,6 +81,11 @@ along with this program. If not, see . /* prevent the modifiers from being stuck, sacrificing some memory */ #define PREVENT_STUCK_MODIFIERS +/* A larger buffer for the dynamic macros as this keymap is not taking + * up that much memory. + */ +#define DYNAMIC_MACRO_SIZE 256 + #ifdef SUBPROJECT_rev3 #include "rev3/config.h" #endif diff --git a/keyboards/planck/keymaps/vifon/keymap.c b/keyboards/planck/keymaps/vifon/keymap.c index 80c4a516c3..ee0c0ac366 100644 --- a/keyboards/planck/keymaps/vifon/keymap.c +++ b/keyboards/planck/keymaps/vifon/keymap.c @@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_PPG] = { /* Pure Pro: Gaming */ {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, DF(_RS), _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, {_______, _______, XXXXXXX, _______, KM_RS , _______, _______, KM_LW , _______, _______, _______, _______}, }, [_NM] = { /* Numeric */ @@ -90,7 +90,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {_______, _______, KC_LGUI, KC_LALT, _______, _______, _______, _______, _______, _______, _______, _______} }, [_DYN]= { /* special */ - {_______, DYN_REC_START1, DYN_MACRO_PLAY1, _______, _______, _______, _______, _______, KC_INS, _______, KC_PSCR, KC_PAUS}, + {_______, DYN_REC_START1, DYN_MACRO_PLAY1, _______, _______, _______, _______, KC_APP, KC_INS, _______, KC_PSCR, KC_PAUS}, {_______, DYN_REC_START2, DYN_MACRO_PLAY2, _______, _______, _______, _______, _______, _______, KC_CAPS, KC_SLCK, KC_NLCK}, {KM_SHLK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} diff --git a/keyboards/readme.md b/keyboards/readme.md index 81a23c7e55..d2f41ad7e9 100644 --- a/keyboards/readme.md +++ b/keyboards/readme.md @@ -51,5 +51,6 @@ These keyboards are part of the QMK repository, but their manufacturers are not * [S60-x](/keyboards/s60-x) — DIY compact keyboard designed by VinnyCordeiro for Sentraq. * [Satan](/keyboards/satan) — A GH60 variant. * [SixKeyBoard](/keyboards/sixkeyboard) — A 6-key keyboard made by TechKeys. -* [TheVan 44](/keyboars/tv44) — A 44-key staggered keybard by Evangs. +* [TheVan 44](/keyboards/tv44) — A 44-key staggered keybard by Evangs. +* [WhiteFox](/keyboards/whitefox) — A 65% keyboard designed as a partnership by matt3o, Massdrop and Input Club * [Vision Division](/keyboards/vision_division) — Full Size / Split Linear Keyboard by IBNobody. diff --git a/keyboards/tv44/keymaps/default/keymap.c b/keyboards/tv44/keymaps/default/keymap.c index f3f989f2d1..b9fe33a7ce 100644 --- a/keyboards/tv44/keymaps/default/keymap.c +++ b/keyboards/tv44/keymaps/default/keymap.c @@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QW] = { /* Qwerty */ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, MO(_L1) }, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_F, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_L2) }, {KC_LCTL, MO(_L2), KC_LGUI, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_RALT, KC_ESC, XXXXXXX, TG(_L3) } }, [_DV] = { /* Dvorak */ diff --git a/keyboards/whitefox/Makefile b/keyboards/whitefox/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/whitefox/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/whitefox/bootloader_defs.h b/keyboards/whitefox/bootloader_defs.h new file mode 100644 index 0000000000..c67153be60 --- /dev/null +++ b/keyboards/whitefox/bootloader_defs.h @@ -0,0 +1 @@ +#define KIIBOHD_BOOTLOADER diff --git a/keyboards/whitefox/chconf.h b/keyboards/whitefox/chconf.h new file mode 100644 index 0000000000..d9114ec858 --- /dev/null +++ b/keyboards/whitefox/chconf.h @@ -0,0 +1,524 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 100000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/* Use __WFI in the idle thread for waiting. Does lower the power + * consumption. */ +#define CORTEX_ENABLE_WFI_IDLE TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/whitefox/config.h b/keyboards/whitefox/config.h new file mode 100644 index 0000000000..b7116341ff --- /dev/null +++ b/keyboards/whitefox/config.h @@ -0,0 +1,78 @@ +/* +Copyright 2015 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#define PREVENT_STUCK_MODIFIERS + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0F0F +#define DEVICE_VER 0x0001 +/* in python2: list(u"whatever".encode('utf-16-le')) */ +/* at most 32 characters or the ugly hack in usb_main.c borks */ +#define MANUFACTURER "Input Club" +#define USBSTR_MANUFACTURER 'I', '\x00', 'n', '\x00', 'p', '\x00', 'u', '\x00', 't', '\x00', ' ', '\x00', 'C', '\x00', 'l', '\x00', 'u', '\x00', 'b', '\x00' +#define PRODUCT "WhiteFox/QMK" +#define USBSTR_PRODUCT 'W', '\x00', 'h', '\x00', 'i', '\x00', 't', '\x00', 'e', '\x00', 'F', '\x00', 'o', '\x00', 'x', '\x00', ' ', '\x00' + +/* key matrix size */ +#define MATRIX_ROWS 9 +#define MATRIX_COLS 8 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 6 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Keymap for Infinity prototype */ +//#define INFINITY_PROTOTYPE + +/* Keymap for Infinity 1.1a (first revision with LED support) */ +//#define INFINITY_LED + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/whitefox/halconf.h b/keyboards/whitefox/halconf.h new file mode 100644 index 0000000000..46b37a4f46 --- /dev/null +++ b/keyboards/whitefox/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/keyboards/whitefox/keymaps/default/keymap.c b/keyboards/whitefox/keymaps/default/keymap.c new file mode 100644 index 0000000000..714f90659f --- /dev/null +++ b/keyboards/whitefox/keymaps/default/keymap.c @@ -0,0 +1,51 @@ +/* +Copyright 2015 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "whitefox.h" + +const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default Layer + * ,---------------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|Ins| + * |---------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|Del| + * |---------------------------------------------------------------| + * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Enter |PgU| + * |---------------------------------------------------------------| + * |Shif| | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgD| + * |---------------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Fn0 |Alt |Gui | |Lef|Dow|Rig| + * `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}; + +const uint16_t fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), +}; diff --git a/keyboards/whitefox/keymaps/matt3o/keymap.c b/keyboards/whitefox/keymaps/matt3o/keymap.c new file mode 100644 index 0000000000..4455886a50 --- /dev/null +++ b/keyboards/whitefox/keymaps/matt3o/keymap.c @@ -0,0 +1,92 @@ +/* +Copyright 2015 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "whitefox.h" + +const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default Layer + * ,---------------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|Ins| + * |---------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|Del| + * |---------------------------------------------------------------| + * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Enter |PgU| + * |---------------------------------------------------------------| + * |Shif| | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgD| + * |---------------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Fn0 |Alt |Gui | |Lef|Dow|Rig| + * `---------------------------------------------------------------' + */ + [0] = KEYMAP( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS,KC_GRV, KC_MUTE,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC, KC_DEL, \ + KC_FN0, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NUHS,KC_ENT, KC_PGUP,\ + KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, KC_UP, KC_PGDN,\ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_FN1, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT \ + ), + [1] = KEYMAP( \ + KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_TRNS,KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_DEL , KC_INS ,\ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_VOLU,\ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP,KC_VOLD,\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_HOME,KC_PGDN,KC_END \ + ), + [2] = KEYMAP( \ + KC_SLEP,KC_P1, KC_P2, KC_P3, KC_P4, KC_P5, KC_P6, KC_P7, KC_P8, KC_P9, KC_P0, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_FN2, \ + KC_TRNS,KC_TRNS,KC_FN5 ,KC_FN6 ,KC_TRNS,KC_FN7 ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_TRNS,KC_TRNS,KC_TRNS, KC_FN3, \ + KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_FN4 ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_CALC,KC_TRNS,KC_TRNS,KC_TRNS,KC_MAIL,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS \ + ), +}; + +/* Give numbers some descriptive names */ +#define ACTION_LEDS_ALL 1 +#define ACTION_LEDS_GAME 2 + +const uint16_t fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), + [1] = ACTION_LAYER_MOMENTARY(2), + [2] = ACTION_FUNCTION(ACTION_LEDS_ALL), + [3] = ACTION_FUNCTION(ACTION_LEDS_GAME), + + [4] = ACTION_USAGE_CONSUMER(0x1B4), + [5] = ACTION_USAGE_CONSUMER(0x196), + [6] = ACTION_USAGE_CONSUMER(0x1A6), + [7] = ACTION_USAGE_CONSUMER(0x1A0), + +}; + +/* custom action function */ +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + /* + (void)opt; + switch(id) { + case ACTION_LEDS_ALL: + if(record->event.pressed) { + // signal the LED controller thread + chMBPost(&led_mailbox, LED_MSG_GAME_TOGGLE, TIME_IMMEDIATE); + } + break; + case ACTION_LEDS_GAME: + if(record->event.pressed) { + // signal the LED controller thread + chMBPost(&led_mailbox, LED_MSG_ALL_TOGGLE, TIME_IMMEDIATE); + } + break; + } + */ +} diff --git a/keyboards/whitefox/led.c b/keyboards/whitefox/led.c new file mode 100644 index 0000000000..aed66c7c03 --- /dev/null +++ b/keyboards/whitefox/led.c @@ -0,0 +1,24 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "hal.h" + +#include "led.h" + + +void led_set(uint8_t usb_led) { +} diff --git a/keyboards/whitefox/matrix.c b/keyboards/whitefox/matrix.c new file mode 100644 index 0000000000..9202ab0231 --- /dev/null +++ b/keyboards/whitefox/matrix.c @@ -0,0 +1,132 @@ +#include +#include +#include +#include "hal.h" +#include "timer.h" +#include "wait.h" +#include "print.h" +#include "matrix.h" + + +/* + * Matt3o's WhiteFox + * Column pins are input with internal pull-down. Row pins are output and strobe with high. + * Key is high or 1 when it turns on. + * + * col: { PTD0, PTD1, PTD4, PTD5, PTD6, PTD7, PTC1, PTC2 } + * row: { PTB2, PTB3, PTB18, PTB19, PTC0, PTC8, PTC9, PTC10, PTC11 } + */ +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; + + +void matrix_init(void) +{ +//debug_matrix = true; + /* Column(sense) */ + palSetPadMode(GPIOD, 0, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 1, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 4, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 5, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 7, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 1, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 2, PAL_MODE_INPUT_PULLDOWN); + + /* Row(strobe) */ + palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 18, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 19, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 8, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 9, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 10, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 11, PAL_MODE_OUTPUT_PUSHPULL); + + memset(matrix, 0, MATRIX_ROWS); + memset(matrix_debouncing, 0, MATRIX_ROWS); +} + +uint8_t matrix_scan(void) +{ + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix_row_t data = 0; + + // strobe row + switch (row) { + case 0: palSetPad(GPIOB, 2); break; + case 1: palSetPad(GPIOB, 3); break; + case 2: palSetPad(GPIOB, 18); break; + case 3: palSetPad(GPIOB, 19); break; + case 4: palSetPad(GPIOC, 0); break; + case 5: palSetPad(GPIOC, 8); break; + case 6: palSetPad(GPIOC, 9); break; + case 7: palSetPad(GPIOC, 10); break; + case 8: palSetPad(GPIOC, 11); break; + } + + wait_us(20); // need wait to settle pin state + + // read col data: { PTD0, PTD1, PTD4, PTD5, PTD6, PTD7, PTC1, PTC2 } + data = ((palReadPort(GPIOC) & 0x06UL) << 5) | + ((palReadPort(GPIOD) & 0xF0UL) >> 2) | + (palReadPort(GPIOD) & 0x03UL); + + // un-strobe row + switch (row) { + case 0: palClearPad(GPIOB, 2); break; + case 1: palClearPad(GPIOB, 3); break; + case 2: palClearPad(GPIOB, 18); break; + case 3: palClearPad(GPIOB, 19); break; + case 4: palClearPad(GPIOC, 0); break; + case 5: palClearPad(GPIOC, 8); break; + case 6: palClearPad(GPIOC, 9); break; + case 7: palClearPad(GPIOC, 10); break; + case 8: palClearPad(GPIOC, 11); break; + } + + if (matrix_debouncing[row] != data) { + matrix_debouncing[row] = data; + debouncing = true; + debouncing_time = timer_read(); + } + } + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix[row] = matrix_debouncing[row]; + } + debouncing = false; + } + return 1; +} + +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1</os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +# - For Infinity KB, SERIES = K20x +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +# - MK20DX128BLDR4 for Infinity with Kiibohd bootloader +# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader +MCU_LDSCRIPT = MK20DX256BLDR8 + +# Startup code to use +# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 and Infinity KB +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = k20x7 + +# Board: it should exist either in /os/hal/boards/ +# or /boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +# - MCHCK_K20 for Infinity KB +BOARD = PJRC_TEENSY_3_1 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 +OPT_DEFS = + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +#CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover +CUSTOM_MATRIX ?= yes # Custom matrix file diff --git a/keyboards/whitefox/whitefox.c b/keyboards/whitefox/whitefox.c new file mode 100644 index 0000000000..d35bf83388 --- /dev/null +++ b/keyboards/whitefox/whitefox.c @@ -0,0 +1,17 @@ +/* +Copyright 2012,2013 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "whitefox.h" diff --git a/keyboards/whitefox/whitefox.h b/keyboards/whitefox/whitefox.h new file mode 100644 index 0000000000..3b3c6bd21d --- /dev/null +++ b/keyboards/whitefox/whitefox.h @@ -0,0 +1,54 @@ +/* +Copyright 2014 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#ifndef WHITEFOX_H +#define WHITEFOX_H + +#include "quantum.h" + +/* WhiteFox + * ,---------------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|Ins| + * |---------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|Del| + * |---------------------------------------------------------------| + * |CapsL | A| S| D| F| G| H| J| K| L| ;| '|Enter |PgU| + * |---------------------------------------------------------------| + * |Shif| | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PgD| + * |---------------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |App |Alt |Gui | |Lef|Dow|Rig| + * `---------------------------------------------------------------' + */ + +#define KEYMAP( \ + K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, K61, \ + K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, K23, K33, \ + K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, K64, K74, K84, K05, \ + K15, K25, K35, K45, K55, K65, K75, K85, K06, K16, K26, K36, K46, K56, K66, \ + K76, K86, K07, K17, K27, K37, K47, K57, K67, K77 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57 }, \ + { K60, K61, K62, K63, K64, K65, K66, K67 }, \ + { K70, K71, K72, K73, K74, K75, K76, K77 }, \ + { K80, K81, K82, K83, K84, K85, K86, KC_NO } \ +} + +#endif diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index 5cd3c8e780..4853655f95 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -159,6 +159,8 @@ enum quantum_keycodes { #define MEH(kc) (kc | QK_LCTL | QK_LSFT | QK_LALT) #define LCAG(kc) (kc | QK_LCTL | QK_LALT | QK_LGUI) #define ALTG(kc) (kc | QK_RCTL | QK_RALT) +#define SCMD(kc) (kc | QK_LGUI | QK_LSFT) +#define SWIN(kc) SCMD(kc) #define MOD_HYPR 0xf #define MOD_MEH 0x7 @@ -293,6 +295,8 @@ enum quantum_keycodes { #define MEH_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT), kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl #define LCAG_T(kc) MT((MOD_LCTL | MOD_LALT | MOD_LGUI), kc) // Left control alt and gui #define ALL_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI), kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/ +#define SCMD_T(kc) MT((MOD_LGUI | MOD_LSFT), kc) +#define SWIN_T(kc) SCMD_T(kc) // Dedicated keycode versions for Hyper and Meh, if you want to use them as standalone keys rather than mod-tap #define KC_HYPR HYPR(KC_NO) diff --git a/readme.md b/readme.md index 90584cabcb..d33c3ad013 100644 --- a/readme.md +++ b/readme.md @@ -31,7 +31,7 @@ The OLKB product firmwares are maintained by [Jack Humbert](https://github.com/j This is not a tiny project. While this is the main readme, there are many other files you might want to consult. Here are some points of interest: -* [**The Wiki**](https://github.com/jackhumbert/qmk_firmware/wiki) - the entirity of the readme has been moved here +* [**The Wiki**](https://github.com/jackhumbert/qmk_firmware/wiki) - the entirety of the readme has been moved here * The readme for your own keyboard: This is found under `keyboards//`. So for the ErgoDox EZ, it's [here](keyboards/ergodox/ez/); for the Planck, it's [here](keyboards/planck/) and so on. * The list of possible keycodes you can use in your keymap is actually spread out in a few different places: * [doc/keycode.txt](doc/keycode.txt) - an explanation of those same keycodes.