diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile
index 8d91b7655f..8a51342846 100644
--- a/Bootloaders/CDC/makefile
+++ b/Bootloaders/CDC/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index cd5d2c7e27..2cccd1d8dc 100644
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Bootloaders/Incomplete/MIDI/makefile b/Bootloaders/Incomplete/MIDI/makefile
index af3df3bc3d..4a29d0b886 100644
--- a/Bootloaders/Incomplete/MIDI/makefile
+++ b/Bootloaders/Incomplete/MIDI/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Bootloaders/TeensyHID/makefile b/Bootloaders/TeensyHID/makefile
index c7210f0e8e..12b16424b3 100644
--- a/Bootloaders/TeensyHID/makefile
+++ b/Bootloaders/TeensyHID/makefile
@@ -63,7 +63,7 @@
MCU = atmega32u4
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD =
diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile
index 5eda91b678..cdb5105730 100644
--- a/Demos/Device/ClassDriver/AudioInput/makefile
+++ b/Demos/Device/ClassDriver/AudioInput/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile
index 4729f1ffe7..ba2f9130af 100644
--- a/Demos/Device/ClassDriver/AudioOutput/makefile
+++ b/Demos/Device/ClassDriver/AudioOutput/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
index d8cf086b8e..8f147011dd 100644
--- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile
index 1160f65285..fffca878fa 100644
--- a/Demos/Device/ClassDriver/GenericHID/makefile
+++ b/Demos/Device/ClassDriver/GenericHID/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile
index 63d739f5c9..a1357d6062 100644
--- a/Demos/Device/ClassDriver/Joystick/makefile
+++ b/Demos/Device/ClassDriver/Joystick/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile
index 9a6d396c9a..5d94c5a9e7 100644
--- a/Demos/Device/ClassDriver/Keyboard/makefile
+++ b/Demos/Device/ClassDriver/Keyboard/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile
index 089ef05328..64e425a89d 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/makefile
+++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile
index 7965e91892..6adefed8d0 100644
--- a/Demos/Device/ClassDriver/MIDI/makefile
+++ b/Demos/Device/ClassDriver/MIDI/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile
index c4eee7b7c9..9aa1e1a11f 100644
--- a/Demos/Device/ClassDriver/MassStorage/makefile
+++ b/Demos/Device/ClassDriver/MassStorage/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
index 3fc8293e9d..b44c97f30d 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile
index aa56743e76..4d92bb343d 100644
--- a/Demos/Device/ClassDriver/Mouse/makefile
+++ b/Demos/Device/ClassDriver/Mouse/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile
index 2c28b98201..2b38bc22a2 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/makefile
+++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile
index 024bf92892..542f7291f4 100644
--- a/Demos/Device/ClassDriver/VirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerial/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
index 990760e85f..c2f4e1b6f0 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile
index c2ac4ba478..4fc3b844de 100644
--- a/Demos/Device/Incomplete/Sideshow/makefile
+++ b/Demos/Device/Incomplete/Sideshow/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile
index 21d6a9731b..07c9b60771 100644
--- a/Demos/Device/LowLevel/AudioInput/makefile
+++ b/Demos/Device/LowLevel/AudioInput/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile
index cd91640a2e..4d0d40e327 100644
--- a/Demos/Device/LowLevel/AudioOutput/makefile
+++ b/Demos/Device/LowLevel/AudioOutput/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile
index ef10bb38d8..af9540eeed 100644
--- a/Demos/Device/LowLevel/DualVirtualSerial/makefile
+++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile
index 9e934b3341..6a94fe49c1 100644
--- a/Demos/Device/LowLevel/GenericHID/makefile
+++ b/Demos/Device/LowLevel/GenericHID/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile
index ff6cf801ca..a5bad9fa2d 100644
--- a/Demos/Device/LowLevel/Joystick/makefile
+++ b/Demos/Device/LowLevel/Joystick/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile
index 53612cab2f..b294ed7b9f 100644
--- a/Demos/Device/LowLevel/Keyboard/makefile
+++ b/Demos/Device/LowLevel/Keyboard/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile
index 5bd4e00b17..333e1054e9 100644
--- a/Demos/Device/LowLevel/KeyboardMouse/makefile
+++ b/Demos/Device/LowLevel/KeyboardMouse/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile
index 09f64724f6..2cc4bce4f3 100644
--- a/Demos/Device/LowLevel/MIDI/makefile
+++ b/Demos/Device/LowLevel/MIDI/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile
index eee62f1912..51da5ccaad 100644
--- a/Demos/Device/LowLevel/MassStorage/makefile
+++ b/Demos/Device/LowLevel/MassStorage/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile
index b5cfcd24f0..7cbc631b3e 100644
--- a/Demos/Device/LowLevel/Mouse/makefile
+++ b/Demos/Device/LowLevel/Mouse/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile
index 74909f43a5..3903a9c8b4 100644
--- a/Demos/Device/LowLevel/RNDISEthernet/makefile
+++ b/Demos/Device/LowLevel/RNDISEthernet/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile
index 6528651341..5adec6cb6c 100644
--- a/Demos/Device/LowLevel/VirtualSerial/makefile
+++ b/Demos/Device/LowLevel/VirtualSerial/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
index 29f798ca89..fd4a28c737 100644
--- a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
+++ b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
index d071cc2c6f..b7c23aae50 100644
--- a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/KeyboardHost/makefile b/Demos/Host/ClassDriver/KeyboardHost/makefile
index 4a682b0371..1462b85f8e 100644
--- a/Demos/Host/ClassDriver/KeyboardHost/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
index c0b31afc3b..16e52f551e 100644
--- a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
index 3489b1f641..afd95c9e6b 100644
--- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
+++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
@@ -41,7 +41,7 @@
*
* \section SSec_Description Project Description:
*
- * MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incomming MIDI note
+ * MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note
* on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to
* the attached MIDI device, with the board HWB controlling the note channel.
*
diff --git a/Demos/Host/ClassDriver/MIDIHost/makefile b/Demos/Host/ClassDriver/MIDIHost/makefile
index ecfe023195..279312d9b4 100644
--- a/Demos/Host/ClassDriver/MIDIHost/makefile
+++ b/Demos/Host/ClassDriver/MIDIHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/MassStorageHost/makefile b/Demos/Host/ClassDriver/MassStorageHost/makefile
index af3f577793..fdbdccfd14 100644
--- a/Demos/Host/ClassDriver/MassStorageHost/makefile
+++ b/Demos/Host/ClassDriver/MassStorageHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile
index d37d4d53d1..287691d453 100644
--- a/Demos/Host/ClassDriver/MouseHost/makefile
+++ b/Demos/Host/ClassDriver/MouseHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
index a579a2a746..39a96c3d3c 100644
--- a/Demos/Host/ClassDriver/MouseHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/PrinterHost/makefile b/Demos/Host/ClassDriver/PrinterHost/makefile
index f0cacffad9..1df154426d 100644
--- a/Demos/Host/ClassDriver/PrinterHost/makefile
+++ b/Demos/Host/ClassDriver/PrinterHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
index 148fdf2f14..5b2bfe1339 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
@@ -36,7 +36,7 @@
#include "RNDISEthernetHost.h"
-/** Buffer to hold incomming and outgoing Ethernet packets. */
+/** Buffer to hold incoming and outgoing Ethernet packets. */
uint8_t PacketBuffer[1024];
/** LUFA RNDIS Class driver interface configuration and state information. This structure is
@@ -146,7 +146,7 @@ int main(void)
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
- PrintIncommingPackets();
+ PrintIncomingPackets();
break;
}
@@ -156,8 +156,8 @@ int main(void)
}
}
-/** Prints incomming packets from the attached RNDIS device to the serial port. */
-void PrintIncommingPackets(void)
+/** Prints incoming packets from the attached RNDIS device to the serial port. */
+void PrintIncomingPackets(void)
{
if (RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface))
{
diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
index b1eac9e48e..06b9fd525d 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
@@ -68,7 +68,7 @@
/* Function Prototypes: */
void SetupHardware(void);
- void PrintIncommingPackets(void);
+ void PrintIncomingPackets(void);
void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
void EVENT_USB_Host_DeviceAttached(void);
diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
index c8546846b9..59672d7aba 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/StillImageHost/makefile b/Demos/Host/ClassDriver/StillImageHost/makefile
index 3a00809abb..70e2ccf8a1 100644
--- a/Demos/Host/ClassDriver/StillImageHost/makefile
+++ b/Demos/Host/ClassDriver/StillImageHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/makefile b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
index 2942a6debb..0a5d647a7c 100644
--- a/Demos/Host/ClassDriver/VirtualSerialHost/makefile
+++ b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile
index d0d7192f6c..63c7f527ac 100644
--- a/Demos/Host/Incomplete/BluetoothHost/makefile
+++ b/Demos/Host/Incomplete/BluetoothHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile
index f04310d28f..b001557615 100644
--- a/Demos/Host/LowLevel/GenericHIDHost/makefile
+++ b/Demos/Host/LowLevel/GenericHIDHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/makefile b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
index ad476d4067..5b09bf98b7 100644
--- a/Demos/Host/LowLevel/JoystickHostWithParser/makefile
+++ b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile
index 0414209442..eb889ff994 100644
--- a/Demos/Host/LowLevel/KeyboardHost/makefile
+++ b/Demos/Host/LowLevel/KeyboardHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
index bad75cc322..e1202ed885 100644
--- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
+++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt b/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
index 3489b1f641..afd95c9e6b 100644
--- a/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
+++ b/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
@@ -41,7 +41,7 @@
*
* \section SSec_Description Project Description:
*
- * MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incomming MIDI note
+ * MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note
* on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to
* the attached MIDI device, with the board HWB controlling the note channel.
*
diff --git a/Demos/Host/LowLevel/MIDIHost/makefile b/Demos/Host/LowLevel/MIDIHost/makefile
index 1050de5965..b1ee5860d0 100644
--- a/Demos/Host/LowLevel/MIDIHost/makefile
+++ b/Demos/Host/LowLevel/MIDIHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile
index 756763249f..0caa74929b 100644
--- a/Demos/Host/LowLevel/MassStorageHost/makefile
+++ b/Demos/Host/LowLevel/MassStorageHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile
index 31d1a85e07..4c9407b0c0 100644
--- a/Demos/Host/LowLevel/MouseHost/makefile
+++ b/Demos/Host/LowLevel/MouseHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile
index d42f45e5a1..74a1d15c06 100644
--- a/Demos/Host/LowLevel/MouseHostWithParser/makefile
+++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile
index 54108ade74..32ab7621aa 100644
--- a/Demos/Host/LowLevel/PrinterHost/makefile
+++ b/Demos/Host/LowLevel/PrinterHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
index 3029da831c..5ca5915787 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
@@ -121,7 +121,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
-void PrintIncommingPackets(void)
+void PrintIncomingPackets(void)
{
uint8_t ErrorCode;
@@ -263,7 +263,7 @@ void RNDIS_Host_Task(void)
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
- PrintIncommingPackets();
+ PrintIncomingPackets();
break;
}
diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
index 0110a2fbb2..20a48ac104 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
@@ -84,7 +84,7 @@
/* Function Prototypes: */
void SetupHardware(void);
- void PrintIncommingPackets(void);
+ void PrintIncomingPackets(void);
void RNDIS_Host_Task(void);
void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/makefile b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
index 32389b6f9a..8bd97e091e 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/makefile
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile
index 73cc35d7ea..e830c7ae4c 100644
--- a/Demos/Host/LowLevel/StillImageHost/makefile
+++ b/Demos/Host/LowLevel/StillImageHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Demos/Host/LowLevel/VirtualSerialHost/makefile b/Demos/Host/LowLevel/VirtualSerialHost/makefile
index 168b1b4749..dc9604591a 100644
--- a/Demos/Host/LowLevel/VirtualSerialHost/makefile
+++ b/Demos/Host/LowLevel/VirtualSerialHost/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/LUFA/Common/BoardTypes.h b/LUFA/Common/BoardTypes.h
index ccbd4750da..10e31ac1b1 100644
--- a/LUFA/Common/BoardTypes.h
+++ b/LUFA/Common/BoardTypes.h
@@ -89,6 +89,18 @@
/** Selects the EVK527 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */
#define BOARD_EVK527 9
+
+ /** Disables board drivers when operation will not be adversely affected (e.g. LEDs) - use of board drivers
+ * such as the Joystick driver, where the removal would adversely affect the code's operation is still disallowed. */
+ #define BOARD_NONE 10
+
+ #if !defined(__DOXYGEN__)
+ #define BOARD_ BOARD_NONE
+
+ #if !defined(BOARD)
+ #define BOARD BOARD_NONE
+ #endif
+ #endif
#endif
diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h
index d1de8d52e3..4e7588c286 100644
--- a/LUFA/Drivers/Board/Buttons.h
+++ b/LUFA/Drivers/Board/Buttons.h
@@ -69,8 +69,8 @@
/* Includes: */
#include "../../Common/Common.h"
- #if !defined(BOARD)
- #error BOARD must be set in makefile to a value specified in BoardTypes.h.
+ #if (BOARD == BOARD_NONE)
+ #error The Board Buttons driver cannot be used if the makefile BOARD option is not set.
#elif (BOARD == BOARD_USBKEY)
#include "USBKEY/Buttons.h"
#elif (BOARD == BOARD_STK525)
diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h
index 3174f1b6c8..0197b3e2f2 100644
--- a/LUFA/Drivers/Board/Dataflash.h
+++ b/LUFA/Drivers/Board/Dataflash.h
@@ -150,8 +150,8 @@
}
/* Includes: */
- #if !defined(BOARD)
- #error BOARD must be set in makefile to a value specified in BoardTypes.h.
+ #if (BOARD == BOARD_NONE)
+ #error The Board Buttons driver cannot be used if the makefile BOARD option is not set.
#elif (BOARD == BOARD_USBKEY)
#include "USBKEY/Dataflash.h"
#elif (BOARD == BOARD_STK525)
diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h
index 598307b720..be9d267cce 100644
--- a/LUFA/Drivers/Board/Joystick.h
+++ b/LUFA/Drivers/Board/Joystick.h
@@ -68,8 +68,8 @@
/* Includes: */
#include "../../Common/Common.h"
- #if !defined(BOARD)
- #error BOARD must be set in makefile to a value specified in BoardTypes.h.
+ #if (BOARD == BOARD_NONE)
+ #error The Board Joystick driver cannot be used if the makefile BOARD option is not set.
#elif (BOARD == BOARD_USBKEY)
#include "USBKEY/Joystick.h"
#elif (BOARD == BOARD_STK525)
diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index 61f79ceec3..222be0e65c 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -76,8 +76,14 @@
/* Includes: */
#include "../../Common/Common.h"
- #if !defined(BOARD)
- #error BOARD must be set in makefile to a value specified in BoardTypes.h.
+ #if (BOARD == BOARD_NONE)
+ static inline void LEDs_Init(void) {};
+ static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) {};
+ static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) {};
+ static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) {};
+ static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) {};
+ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) {};
+ static inline uint8_t LEDs_GetLEDs(void) { return 0; }
#elif (BOARD == BOARD_USBKEY)
#include "USBKEY/LEDs.h"
#elif (BOARD == BOARD_STK525)
diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index 1b2baf2fb4..86e0b66f07 100644
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -63,8 +63,8 @@
#include "../../Common/Common.h"
#include "../Peripheral/ADC.h"
- #if !defined(BOARD)
- #error BOARD must be set in makefile to a value specified in BoardTypes.h.
+ #if (BOARD == BOARD_NONE)
+ #error The Board Temperature Sensor driver cannot be used if the makefile BOARD option is not set.
#elif ((BOARD != BOARD_USBKEY) && (BOARD != BOARD_STK525) && \
(BOARD != BOARD_STK526) && (BOARD != BOARD_USER) && \
(BOARD != BOARD_EVK527))
diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 63ffaecc8c..521ab38f95 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -21,6 +21,8 @@
* - Added ADC MUX masks for the standard ADC input channels on all AVR models with an ADC, altered demos to use these masks
* as on some models, the channel number is not identical to its single-ended ADC MUX mask
* - New Webserver project, a RNDIS host USB webserver using the open source uIP TCP/IP network stack and FatFS library
+ * - New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which
+ * do not adversely affect the code operation (currently only the LEDs driver)
*
* Changed:
* - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors
diff --git a/LUFA/ManPages/LUFAPoweredProjects.txt b/LUFA/ManPages/LUFAPoweredProjects.txt
index e16476882e..dfcd712d68 100644
--- a/LUFA/ManPages/LUFAPoweredProjects.txt
+++ b/LUFA/ManPages/LUFAPoweredProjects.txt
@@ -46,7 +46,6 @@
* - Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/
* - Orbee, a USB connected RGB Orb for notifications: http://www.franksworkshop.com.au/Electronics/Orbee/Orbee.htm
* - Programmable XBOX controller: http://richard-burke.dyndns.org/wordpress/pan-galactic-gargantuan-gargle-brain-aka-xbox-360-usb-controller/
- * - Purdue Interactive Kiosk: https://engineering.purdue.edu/477grp4/
* - Reprap with LUFA, a LUFA powered 3D printer: http://code.google.com/p/at90usb1287-code-for-arduino-and-eclipse/
* - SEGA Megadrive/Genesis Development Cartridge: http://www.makestuff.eu/wordpress/?page_id=398
* - Stripe Snoop, a Magnetic Card reader: http://www.ossguy.com/ss_usb/
@@ -63,6 +62,7 @@
* - BAP, A tiny LUFA based AVR Programmer: http://www.busware.de/tiki-index.php?page=BAP
* - Digital Survey Instruments Magnetometer and Pointer: http://www.digitalsurveyinstruments.com/
* - Lightweight CC110x USB dongle for 868MHz Protocols: http://busware.de/tiki-index.php?page=CUL
+ * - MIDIFighter, a USB-MIDI controller: http://www.midifighter.com/
* - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3
* - SEGA Megadrive/Super Nintendo Cartridge Reader: http://www.snega2usb.com
* - XMEGA Development Board, using LUFA as an On-Board Programmer: http://xmega.mattair.net/
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
index c7e64a5ebb..f327a47e84 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
@@ -66,7 +66,7 @@ static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
*/
static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)
{
- /* The TPI command for writing to the I/O space uses wierd addressing, where the I/O address's upper
+ /* The TPI command for writing to the I/O space uses weird addressing, where the I/O address's upper
* two bits of the 6-bit address are shifted left once */
XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));
}
diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index 5c0fe0f64f..2698de881b 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile
index 2f00403046..8b9d126a97 100644
--- a/Projects/Benito/makefile
+++ b/Projects/Benito/makefile
@@ -63,7 +63,7 @@
MCU = atmega32u2
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USER
diff --git a/Projects/Incomplete/StandaloneProgrammer/makefile b/Projects/Incomplete/StandaloneProgrammer/makefile
index 074a279ac6..9305373d89 100644
--- a/Projects/Incomplete/StandaloneProgrammer/makefile
+++ b/Projects/Incomplete/StandaloneProgrammer/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Projects/LEDNotifier/makefile b/Projects/LEDNotifier/makefile
index 22a62b5e39..20cd598a68 100644
--- a/Projects/LEDNotifier/makefile
+++ b/Projects/LEDNotifier/makefile
@@ -63,7 +63,7 @@
MCU = at90usb646
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USER
diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile
index 2571ad3a2d..e2d87d8001 100644
--- a/Projects/Magstripe/makefile
+++ b/Projects/Magstripe/makefile
@@ -63,10 +63,10 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USER
+BOARD = NONE
# Processor frequency.
diff --git a/Projects/MissileLauncher/makefile b/Projects/MissileLauncher/makefile
index 5f8c3bc6f1..66ab8cb2f1 100644
--- a/Projects/MissileLauncher/makefile
+++ b/Projects/MissileLauncher/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Projects/TemperatureDataLogger/makefile b/Projects/TemperatureDataLogger/makefile
index a3da35ff3f..622bb1c848 100644
--- a/Projects/TemperatureDataLogger/makefile
+++ b/Projects/TemperatureDataLogger/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Projects/USBtoSerial/makefile b/Projects/USBtoSerial/makefile
index 3bdc15bb13..1a1adc075c 100644
--- a/Projects/USBtoSerial/makefile
+++ b/Projects/USBtoSerial/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Projects/Webserver/Lib/DHCPClientApp.c b/Projects/Webserver/Lib/DHCPClientApp.c
index 79170fabe8..64cd70709b 100644
--- a/Projects/Webserver/Lib/DHCPClientApp.c
+++ b/Projects/Webserver/Lib/DHCPClientApp.c
@@ -50,7 +50,7 @@ void DHCPClientApp_Init(void)
uip_ipaddr(&DHCPServerIPAddress, 255, 255, 255, 255);
AppState->DHCPClient.Connection = uip_udp_new(&DHCPServerIPAddress, HTONS(DHCPC_SERVER_PORT));
- /* If the connection was sucessfully created, bind it to the local DHCP client port */
+ /* If the connection was successfully created, bind it to the local DHCP client port */
if(AppState->DHCPClient.Connection != NULL)
{
uip_udp_bind(AppState->DHCPClient.Connection, HTONS(DHCPC_CLIENT_PORT));
@@ -240,7 +240,7 @@ uint8_t DHCPClientApp_SetOption(uint8_t* DHCPOptionList, uint8_t Option, uint8_t
*/
bool DHCPClientApp_GetOption(uint8_t* DHCPOptionList, uint8_t Option, void* Destination)
{
- /* Look through the incomming DHCP packet's options list for the requested option */
+ /* Look through the incoming DHCP packet's options list for the requested option */
while (*DHCPOptionList != DHCP_OPTION_END)
{
/* Check if the current DHCP option in the packet is the one requested */
@@ -249,7 +249,7 @@ bool DHCPClientApp_GetOption(uint8_t* DHCPOptionList, uint8_t Option, void* Dest
/* Copy request option's data to the destination buffer */
memcpy(Destination, &DHCPOptionList[2], DHCPOptionList[1]);
- /* Indicate that the requested option data was sucessfully retrieved */
+ /* Indicate that the requested option data was successfully retrieved */
return true;
}
@@ -257,7 +257,7 @@ bool DHCPClientApp_GetOption(uint8_t* DHCPOptionList, uint8_t Option, void* Dest
DHCPOptionList += (DHCPOptionList[1] + 2);
}
- /* Requested option not found in the incomming packet's DHCP options list */
+ /* Requested option not found in the incoming packet's DHCP options list */
return false;
}
#endif
diff --git a/Projects/Webserver/Lib/HTTPServerApp.c b/Projects/Webserver/Lib/HTTPServerApp.c
index 081207c6b4..c2263cb98c 100644
--- a/Projects/Webserver/Lib/HTTPServerApp.c
+++ b/Projects/Webserver/Lib/HTTPServerApp.c
@@ -150,7 +150,7 @@ void HTTPServerApp_Callback(void)
}
}
-/** HTTP Server State handler for the Request Process state. This state manages the processing of incomming HTTP
+/** HTTP Server State handler for the Request Process state. This state manages the processing of incoming HTTP
* GET requests to the server from the receiving HTTP client.
*/
static void HTTPServerApp_OpenRequestedFile(void)
diff --git a/Projects/Webserver/Lib/HTTPServerApp.h b/Projects/Webserver/Lib/HTTPServerApp.h
index 13399b0f94..33a647bfe5 100644
--- a/Projects/Webserver/Lib/HTTPServerApp.h
+++ b/Projects/Webserver/Lib/HTTPServerApp.h
@@ -64,7 +64,7 @@
} MIME_Type_t;
/* Macros: */
- /** TCP listen port for incomming HTTP traffic */
+ /** TCP listen port for incoming HTTP traffic */
#define HTTP_SERVER_PORT 80
/* Function Prototypes: */
diff --git a/Projects/Webserver/Lib/TELNETServerApp.h b/Projects/Webserver/Lib/TELNETServerApp.h
index 7b1eb46ee2..ff34d14827 100644
--- a/Projects/Webserver/Lib/TELNETServerApp.h
+++ b/Projects/Webserver/Lib/TELNETServerApp.h
@@ -44,7 +44,7 @@
#include
/* Macros: */
- /** TCP listen port for incomming TELNET traffic */
+ /** TCP listen port for incoming TELNET traffic */
#define TELNET_SERVER_PORT 23
/* Enums: */
diff --git a/Projects/Webserver/Lib/uIPManagement.c b/Projects/Webserver/Lib/uIPManagement.c
index 90629b893b..c7773c4559 100644
--- a/Projects/Webserver/Lib/uIPManagement.c
+++ b/Projects/Webserver/Lib/uIPManagement.c
@@ -30,7 +30,7 @@
/** \file
*
- * uIP Managament functions. This file contains the functions and globals needed to maintain the uIP
+ * uIP Management functions. This file contains the functions and globals needed to maintain the uIP
* stack once an RNDIS device has been attached to the system.
*/
@@ -87,7 +87,7 @@ void uIPManagement_ManageNetwork(void)
{
if ((USB_CurrentMode == USB_MODE_HOST) && (USB_HostState == HOST_STATE_Configured))
{
- uIPManagement_ProcessIncommingPacket();
+ uIPManagement_ProcessIncomingPacket();
uIPManagement_ManageConnections();
}
}
@@ -123,8 +123,8 @@ void uIPManagement_UDPCallback(void)
}
}
-/** Processes incomming packets to the server from the connected RNDIS device, creating responses as needed. */
-static void uIPManagement_ProcessIncommingPacket(void)
+/** Processes Incoming packets to the server from the connected RNDIS device, creating responses as needed. */
+static void uIPManagement_ProcessIncomingPacket(void)
{
/* If no packet received, exit processing routine */
if (!(RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface)))
@@ -132,7 +132,7 @@ static void uIPManagement_ProcessIncommingPacket(void)
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
- /* Read the incomming packet straight into the UIP packet buffer */
+ /* Read the Incoming packet straight into the UIP packet buffer */
RNDIS_Host_ReadPacket(&Ethernet_RNDIS_Interface, uip_buf, &uip_len);
/* If the packet contains an Ethernet frame, process it */
@@ -144,7 +144,7 @@ static void uIPManagement_ProcessIncommingPacket(void)
/* Filter packet by MAC destination */
uip_arp_ipin();
- /* Process incomming packet */
+ /* Process Incoming packet */
uip_input();
/* If a response was generated, send it */
diff --git a/Projects/Webserver/Lib/uIPManagement.h b/Projects/Webserver/Lib/uIPManagement.h
index 1e7ffd0bec..825c5cdef2 100644
--- a/Projects/Webserver/Lib/uIPManagement.h
+++ b/Projects/Webserver/Lib/uIPManagement.h
@@ -69,7 +69,7 @@
void uIPManagement_UDPCallback(void);
#if defined(INCLUDE_FROM_UIPMANAGEMENT_C)
- static void uIPManagement_ProcessIncommingPacket(void);
+ static void uIPManagement_ProcessIncomingPacket(void);
static void uIPManagement_ManageConnections(void);
#endif
diff --git a/Projects/Webserver/makefile b/Projects/Webserver/makefile
index daec03d0b6..98ee03ca4f 100644
--- a/Projects/Webserver/makefile
+++ b/Projects/Webserver/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
diff --git a/Projects/XPLAINBridge/makefile b/Projects/XPLAINBridge/makefile
index 831d53bbd6..ba87e8a1f8 100644
--- a/Projects/XPLAINBridge/makefile
+++ b/Projects/XPLAINBridge/makefile
@@ -63,7 +63,7 @@
MCU = at90usb1287
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = XPLAIN