Add support for the Dimex Stange-ISP programmer board (thanks to Gerhard Wesser).

pull/1469/head
Dean Camera 12 years ago
parent 5fea1abd22
commit 180180e234

@ -18,7 +18,7 @@
#
# And re-run the makefile. Note that each board may have only one target.
# =============================================================================
#
#
#
# ----------------- AVR8 Boards ------------------
BOARD_ADAFRUITU4 = AVR8 : atmega32u4 :
@ -69,6 +69,7 @@ BOARD_USBTINYMKII = AVR8 : at90usb162 :
BOARD_USER = AVR8 : at90usb1287 :
BOARD_XPLAIN = AVR8 : at90usb1287 :
BOARD_XPLAIN_REV1 = AVR8 : at90usb1287 :
BOARD_STANGE_ISP = AVR8 : at90usb162 :
#
# ----------------- XMEGA Boards -----------------
BOARD_A3BU_XPLAINED = XMEGA : atxmega256a3bu :
@ -79,4 +80,4 @@ BOARD_EVK1100 = UC3 : uc3a0512 :
BOARD_EVK1101 = UC3 : uc3b0256 :
BOARD_EVK1104 = UC3 : uc3a3256 :
BOARD_UC3A3_XPLAINED = UC3 : uc3a3256 :
#
#

@ -225,6 +225,9 @@
/** Selects the USB2AX version 3.1 specific board drivers, including the Button and LEDs drivers. */
#define BOARD_USB2AX_V31 53
/** Selects the Stange-ISP specific board drivers, including the Button and LEDs drivers. */
#define BOARD_STANGE_ISP 54
#if !defined(__DOXYGEN__)
#define BOARD_ BOARD_NONE

@ -12,6 +12,7 @@
* - Added support for the Arduino Leonardo board
* - Added support for the Atmel UC3-A3 Xplained board
* - Added support for the Xevelabs USB2AX revision 3.1 board
* - Added support for the Dimex Stange-ISP board (thanks to Gerhard Wesser)
* - Added new \c doxygen_upgrade and \c doxygen_create targets to the DOXYGEN build system module
* - Library Applications:
* - Added a different device serial number when the AVRISP-MKII Clone project is in libUSB compatibility mode, so that

@ -116,6 +116,7 @@
* - Paranoid Studio's US2AX (V1, V2 and V3 hardware revisions)
* - PJRC Teensy (1.x and 2.x versions)
* - Sparkfun U2 Breakout Board
* - Stange ISP Programmer Board
* - TCNISO Blackcat USB JTAG
* - Tempusdictum Benito
* - Tom's USBTINY-MKII (all revisions and versions)

@ -0,0 +1,103 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2012.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief Board specific button driver header for the Dimex Stange-ISP board.
* \copydetails Group_Buttons_STANGE_ISP
*
* \note This file should not be included directly. It is automatically included as needed by the Buttons driver
* dispatch header located in LUFA/Drivers/Board/Buttons.h.
*/
/** \ingroup Group_Buttons
* \defgroup Group_Buttons_STANGE_ISP STANGE_ISP
* \brief Board specific Buttons driver header for the Dimex Stange-ISP.
*
* Board specific Buttons driver header for the Dimex Stange-ISP board (http://www.diamex.de/dxshop/USB-ISP-Programmer-fuer-AVR-STM32-NXP-Cortex).
*
* <table>
* <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
* <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
* </table>
*
* @{
*/
#ifndef __BUTTONS_STANGE_ISP_H__
#define __BUTTONS_STANGE_ISP_H__
/* Includes: */
#include "../../../../Common/Common.h"
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_BUTTONS_H)
#error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
#endif
/* Public Interface - May be used in end-application: */
/* Macros: */
/** Button mask for the first button on the board. */
#define BUTTONS_BUTTON1 (1 << 7)
/* Inline Functions: */
#if !defined(__DOXYGEN__)
static inline void Buttons_Init(void)
{
DDRD &= ~BUTTONS_BUTTON1;
PORTD |= BUTTONS_BUTTON1;
}
static inline void Buttons_Disable(void)
{
DDRD &= ~BUTTONS_BUTTON1;
PORTD &= ~BUTTONS_BUTTON1;
}
static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
static inline uint8_t Buttons_GetStatus(void)
{
return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
}
#endif
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif
/** @} */

@ -0,0 +1,138 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2012.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
* \brief Board specific LED driver header for the Dimex Stange-ISP board.
* \copydetails Group_LEDs_STANGE_ISP
*
* \note This file should not be included directly. It is automatically included as needed by the LEDs driver
* dispatch header located in LUFA/Drivers/Board/LEDs.h.
*/
/** \ingroup Group_LEDs
* \defgroup Group_LEDs_STANGE_ISP STANGE_ISP
* \brief Board specific LED driver header for the Dimex Stange-ISP board.
*
* Board specific LED driver header for the Dimex Stange-ISP board (http://www.diamex.de/dxshop/USB-ISP-Programmer-fuer-AVR-STM32-NXP-Cortex).
*
* <table>
* <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
* <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTD.0</td></tr>
* <tr><td>LEDS_LED2</td><td>Red</td><td>General Indicator</td><td>Low</td><td>PORTD.1</td></tr>
* </table>
*
* @{
*/
#ifndef __LEDS_STANGE_ISP_LEDS_H__
#define __LEDS_STANGE_ISP_LEDS_H__
/* Includes: */
#include "../../../../Common/Common.h"
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_LEDS_H)
#error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
#endif
/* Public Interface - May be used in end-application: */
/* Macros: */
/** LED mask for the first LED on the board. */
#define LEDS_LED1 (1 << 0)
/** LED mask for the second LED on the board. */
#define LEDS_LED2 (1 << 1)
/** LED mask for all the LEDs on the board. */
#define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2)
/** LED mask for none of the board LEDs. */
#define LEDS_NO_LEDS 0
/* Inline Functions: */
#if !defined(__DOXYGEN__)
static inline void LEDs_Init(void)
{
DDRD |= LEDS_ALL_LEDS;
PORTD |= LEDS_ALL_LEDS;
}
static inline void LEDs_Disable(void)
{
DDRD &= ~LEDS_ALL_LEDS;
PORTD &= ~LEDS_ALL_LEDS;
}
static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
{
PORTD &= ~LEDMask;
}
static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
{
PORTD |= LEDMask;
}
static inline void LEDs_SetAllLEDs (const uint8_t LEDMask)
{
PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask);
}
static inline void LEDs_ChangeLEDs ( const uint8_t LEDMask, const uint8_t ActiveMask)
{
PORTD = ((PORTD | LEDMask) & ~ActiveMask);
}
static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
{
PIND = LEDMask;
}
static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
static inline uint8_t LEDs_GetLEDs(void)
{
return (~PORTD & LEDS_ALL_LEDS);
}
#endif
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif
/** @} */

@ -151,6 +151,8 @@
#include "AVR8/OLIMEXISPMK2/Buttons.h"
#elif (BOARD == BOARD_UC3A3_XPLAINED)
#include "UC3/UC3A3_XPLAINED/Buttons.h"
#elif (BOARD == BOARD_STANGE_ISP)
#include "AVR8/STANGE_ISP/Buttons.h"
#else
#include "Board/Buttons.h"
#endif

@ -197,6 +197,8 @@
#include "AVR8/LEONARDO/LEDs.h"
#elif (BOARD == BOARD_UC3A3_XPLAINED)
#include "UC3/UC3A3_XPLAINED/LEDs.h"
#elif (BOARD == BOARD_STANGE_ISP)
#include "AVR8/STANGE_ISP/LEDs.h"
#else
#include "Board/LEDs.h"
#endif

@ -463,6 +463,15 @@
<build type="define" name="BOARD" value="BOARD_UC3A3_XPLAINED"/>
</module>
<module type="driver" id="lufa.drivers.board#stange_isp" caption="STANGE_ISP">
<device-support value="at90usb162"/>
<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Buttons.h"/>
<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/LEDs.h"/>
<build type="define" name="BOARD" value="BOARD_STANGE_ISP"/>
</module>
</select-by-config>
</asf>
</lufa>

Loading…
Cancel
Save