Remove serial driver use from the AVRISP project now that it is no longer needed.

Projects/AVRISP/AVRISP.c

@@ -70,7 +70,6 @@ void SetupHardware(void)
 	/* Hardware Initialization */
 	LEDs_Init();
 	USB_Init();
-	Serial_Init(9600, true);
 
 	#if defined(ADC)
 	/* Initialize the ADC converter for VTARGET level detection on supported AVR models */

Projects/AVRISP/AVRISP.h

@@ -45,7 +45,6 @@
 		#include "Descriptors.h"
 
 		#include <LUFA/Version.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/USB/USB.h>
 		

Projects/AVRISP/AVRISP.txt

@@ -152,7 +152,7 @@
  *   </tr>
  *  </table>
  *
- *  <b><sup>1</sup></b> <i>When PDI_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
+ *  <b><sup>1</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
  *                         via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>
  *
  *  \section Sec_TPI TPI Connections
@@ -196,7 +196,7 @@
  *   </tr>
  *  </table>
  *
- *  <b><sup>1</sup></b> <i>When TPI_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
+ *  <b><sup>1</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
  *                         via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>
  *
  *  \section SSec_Options Project Options

Projects/AVRISP/Lib/V2Protocol.c

@@ -51,8 +51,6 @@ void V2Protocol_ProcessCommand(void)
 {
 	uint8_t V2Command = Endpoint_Read_Byte();
 	
-	Serial_TxByte(V2Command);
-	
 	switch (V2Command)
 	{
 		case CMD_SIGN_ON:

Projects/AVRISP/Lib/V2Protocol.h

@@ -39,7 +39,6 @@
 	/* Includes: */
 		#include <LUFA/Drivers/USB/USB.h>
 		#include <LUFA/Drivers/Peripheral/SPI.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
 		
 		#include "../Descriptors.h"
 		#include "V2ProtocolConstants.h"

Projects/AVRISP/Lib/XPROG/XPROGProtocol.c

@@ -44,7 +44,7 @@ uint32_t XPROG_Param_NVMBase = 0x010001C0;
 uint32_t XPROG_Param_EEPageSize;
 
 /** Currently selected XPROG programming protocol */
-uint8_t  XPROG_SelectedProtocol;
+uint8_t  XPROG_SelectedProtocol = XPRG_PROTOCOL_PDI;
 
 
 /** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI

Projects/AVRISP/makefile

@@ -136,7 +136,6 @@ SRC = $(TARGET).c                                                 \
 	  Lib/XPROG/XMEGANVM.c                                        \
 	  Lib/XPROG/TPITarget.c                                       \
 	  Lib/XPROG/TINYNVM.c                                         \
-	  $(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c               \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \