diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c b/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c index b523b46e35..543e1b879f 100644 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c +++ b/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c @@ -132,7 +132,7 @@ void Bluetooth_ChannelOpened(Bluetooth_Channel_t* const ACLChannel) } /** Bluetooth stack callback event for a non-signal ACL packet reception. This callback fires once a connection - * to a remote Bluetooth device has been made, and the remote device has sent a non-signalling ACL packet. + * to a remote Bluetooth device has been made, and the remote device has sent a non-signaling ACL packet. * * \param[in] Data Pointer to a buffer where the received data is stored * \param[in] DataLen Length of the packet data, in bytes diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h index 16ea94b7a2..70451a6be2 100644 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h +++ b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h @@ -49,7 +49,7 @@ DevControlError = 1, /**< A control request to the device failed to complete successfully */ DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */ InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */ - NoBTInterfaceFound = 4, /**< A compatible Blutooth interface was not found in the device's Configuration Descriptor */ + NoBTInterfaceFound = 4, /**< A compatible Bluetooth interface was not found in the device's Configuration Descriptor */ NoEndpointFound = 5, /**< A compatible set of Bluetooth endpoints were not found in the * device's Bluetooth interface */ diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c index 989eba07c8..68a02d48b7 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c @@ -48,8 +48,8 @@ */ void Bluetooth_ACLTask(void) { - /* Process incomming ACL packets, if any */ - Bluetooth_ProcessIncommingACLPackets(); + /* Process incoming ACL packets, if any */ + Bluetooth_ProcessIncomingACLPackets(); /* Check for any half-open channels, send configuration details to the remote device if found */ for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) @@ -89,7 +89,7 @@ void Bluetooth_ACLTask(void) /* Fill out the Signal Command header in the response packet */ PacketData.SignalCommandHeader.Code = BT_SIGNAL_CONFIGURATION_REQUEST; - PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignallingIdentifier; + PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier; PacketData.SignalCommandHeader.Length = sizeof(PacketData.ConfigurationRequest) + sizeof(PacketData.Option_LocalMTU); @@ -108,11 +108,11 @@ void Bluetooth_ACLTask(void) } } -/** Incomming ACL packet processing task. This task is called by the main ACL processing task to read in and process - * any incomming ACL packets to the device, handling signal requests as they are received or passing along channel +/** Incoming ACL packet processing task. This task is called by the main ACL processing task to read in and process + * any incoming ACL packets to the device, handling signal requests as they are received or passing along channel * data to the user application. */ -static void Bluetooth_ProcessIncommingACLPackets(void) +static void Bluetooth_ProcessIncomingACLPackets(void) { BT_ACL_Header_t ACLPacketHeader; BT_DataPacket_Header_t DataHeader; @@ -137,10 +137,10 @@ static void Bluetooth_ProcessIncommingACLPackets(void) BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DataHeader.DestinationChannel); BT_ACL_DEBUG(2, "-- Payload Length: 0x%04X", DataHeader.PayloadLength); - /* Check the packet's destination channel - signalling channel should be processed by the stack internally */ + /* Check the packet's destination channel - signaling channel should be processed by the stack internally */ if (DataHeader.DestinationChannel == BT_CHANNEL_SIGNALING) { - /* Read in the Signal Command header of the incomming packet */ + /* Read in the Signal Command header of the incoming packet */ BT_Signal_Header_t SignalCommandHeader; Pipe_Read_Stream_LE(&SignalCommandHeader, sizeof(SignalCommandHeader)); @@ -193,7 +193,7 @@ static void Bluetooth_ProcessIncommingACLPackets(void) } else { - /* Non-signalling packet received, read in the packet contents and pass to the user application */ + /* Non-signaling packet received, read in the packet contents and pass to the user application */ uint8_t PacketData[DataHeader.PayloadLength]; Pipe_Read_Stream_LE(PacketData, DataHeader.PayloadLength); Pipe_ClearIN(); @@ -249,7 +249,7 @@ Bluetooth_Channel_t* Bluetooth_GetChannelData(const uint16_t SearchValue, const * \param[in] Data Pointer to a buffer where the data is to be sourced from * \param[in] DataLen Length of the data to send * \param[in] ACLChannel ACL channel information structure containing the destination channel's information, NULL - * to send to the remote device's signalling channel + * to send to the remote device's signaling channel * * \return A value from the \ref BT_SendPacket_ErrorCodes_t enum */ @@ -262,7 +262,7 @@ uint8_t Bluetooth_SendPacket(void* Data, const uint16_t DataLen, Bluetooth_Chann if (!(Bluetooth_Connection.IsConnected)) return BT_SENDPACKET_NotConnected; - /* If the destination channel is not the signalling channel and it is not currently fully open, abort */ + /* If the destination channel is not the signaling channel and it is not currently fully open, abort */ if ((ACLChannel != NULL) && (ACLChannel->State != BT_Channel_Open)) return BT_SENDPACKET_ChannelNotOpen; @@ -342,7 +342,7 @@ Bluetooth_Channel_t* Bluetooth_OpenChannel(const uint16_t PSM) /* Fill out the Signal Command header in the response packet */ PacketData.SignalCommandHeader.Code = BT_SIGNAL_CONNECTION_REQUEST; - PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignallingIdentifier; + PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier; PacketData.SignalCommandHeader.Length = sizeof(PacketData.ConnectionRequest); /* Fill out the Connection Request in the response packet */ @@ -385,7 +385,7 @@ void Bluetooth_CloseChannel(Bluetooth_Channel_t* const ACLChannel) /* Fill out the Signal Command header in the response packet */ PacketData.SignalCommandHeader.Code = BT_SIGNAL_DISCONNECTION_REQUEST; - PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignallingIdentifier; + PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier; PacketData.SignalCommandHeader.Length = sizeof(PacketData.DisconnectionRequest); /* Fill out the Disconnection Request in the response packet */ @@ -624,7 +624,7 @@ static inline void Bluetooth_Signal_ConfigurationResp(const BT_Signal_Header_t* /* Only update the channel's state if it was found in the channel list */ if (ChannelData != NULL) { - /* Check if the channel configuration completed successfuly */ + /* Check if the channel configuration completed successfully */ if (ConfigurationResponse.Result == BT_CONFIGURATION_SUCCESSFUL) { switch (ChannelData->State) diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h index 894c370030..efe9d39f63 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h @@ -54,7 +54,7 @@ /** Lowest possible channel number for L2CAP data channels. */ #define BT_CHANNELNUMBER_BASEOFFSET 0x0040 - /** Bluetooth specification defined channel number for signalling commands. */ + /** Bluetooth specification defined channel number for signaling commands. */ #define BT_CHANNEL_SIGNALING 0x0001 /** Bluetooth specification defined channel number for connectionless data. */ @@ -105,22 +105,22 @@ uint16_t DestinationChannel; /**< Destination channel in the device the data is directed to */ } BT_DataPacket_Header_t; - /** Bluetooth signalling command header structure, for all ACL packets containing a signalling command. */ + /** Bluetooth signaling command header structure, for all ACL packets containing a signaling command. */ typedef struct { uint8_t Code; /**< Signal code, a BT_SIGNAL_* mask value */ uint8_t Identifier; /**< Unique signal command identifier to link requests and responses */ - uint16_t Length; /**< Length of the signalling command data, in bytes */ + uint16_t Length; /**< Length of the signaling command data, in bytes */ } BT_Signal_Header_t; - /** Connection Request signalling command structure, for channel connection requests. */ + /** Connection Request signaling command structure, for channel connection requests. */ typedef struct { uint16_t PSM; /**< Type of data the channel will carry, a CHANNEL_PSM_* mask value */ uint16_t SourceChannel; /**< Channel source on the sending device this channel will link to */ } BT_Signal_ConnectionReq_t; - /** Connection response signalling command structure, for responses to channel connection requests. */ + /** Connection response signaling command structure, for responses to channel connection requests. */ typedef struct { uint16_t DestinationChannel; /**< Destination device channel that the connection request was processed on */ @@ -129,28 +129,28 @@ uint16_t Status; /**< Status of the request if the result was set to the Pending value */ } BT_Signal_ConnectionResp_t; - /** Disconnection request signalling command structure, for channel disconnection requests. */ + /** Disconnection request signaling command structure, for channel disconnection requests. */ typedef struct { uint16_t DestinationChannel; /**< Destination channel address which is to be disconnected */ uint16_t SourceChannel; /**< Source channel address which is to be disconnected */ } BT_Signal_DisconnectionReq_t; - /** Disconnection response signalling command structure, for responses to channel disconnection requests. */ + /** Disconnection response signaling command structure, for responses to channel disconnection requests. */ typedef struct { uint16_t DestinationChannel; /**< Destination channel address which was disconnected */ uint16_t SourceChannel; /**< Source channel address which was disconnected */ } BT_Signal_DisconnectionResp_t; - /** Configuration Request signalling command structure, for channel configuration requests. */ + /** Configuration Request signaling command structure, for channel configuration requests. */ typedef struct { uint16_t DestinationChannel; /**< Destination channel address which is to be disconnected */ uint16_t Flags; /**< Configuration flags for the request, including command continuation */ } BT_Signal_ConfigurationReq_t; - /** Configuration Response signalling command structure, for responses to channel configuration requests. */ + /** Configuration Response signaling command structure, for responses to channel configuration requests. */ typedef struct { uint16_t SourceChannel; /**< Source channel that the configuration request was directed at */ @@ -158,13 +158,13 @@ uint16_t Result; /**< Configuration result, a BT_CONFIGURATION_* mask value */ } BT_Signal_ConfigurationResp_t; - /** Information Request signalling command structure, for device information requests. */ + /** Information Request signaling command structure, for device information requests. */ typedef struct { uint16_t InfoType; /**< Data type that is being requested, a BT_INFOREQ_* mask value */ } BT_Signal_InformationReq_t; - /** Information Response signalling command structure, for responses to information requests. */ + /** Information Response signaling command structure, for responses to information requests. */ typedef struct { uint16_t InfoType; /**< Data type that was requested, a BT_INFOREQ_* mask value */ @@ -184,7 +184,7 @@ void Bluetooth_ACLTask(void); #if defined(INCLUDE_FROM_BLUETOOTH_ACLPACKETS_C) - static void Bluetooth_ProcessIncommingACLPackets(void); + static void Bluetooth_ProcessIncomingACLPackets(void); static inline void Bluetooth_Signal_ConnectionReq(const BT_Signal_Header_t* const SignalCommandHeader); static inline void Bluetooth_Signal_ConnectionResp(const BT_Signal_Header_t* const SignalCommandHeader); diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c index d718752127..0db17a263e 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c @@ -44,7 +44,7 @@ #define INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C #include "BluetoothHCICommands.h" -/** Temporary Bluetooth Device Address, for HCI responses which much include the detination address */ +/** Temporary Bluetooth Device Address, for HCI responses which much include the destination address */ static uint8_t Bluetooth_TempDeviceAddress[6]; /** Bluetooth HCI processing task. This task should be called repeatedly the main Bluetooth diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h index f74580ec1c..f47bf1e0a1 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h @@ -87,13 +87,13 @@ /** Enum for the possible error codes returned by the \ref Bluetooth_SendPacket() function. */ enum BT_SendPacket_ErrorCodes_t { - BT_SENDPACKET_NoError = 0, /**< The packet was sent sucessfully. */ + BT_SENDPACKET_NoError = 0, /**< The packet was sent successfully. */ BT_SENDPACKET_NotConnected = 1, /**< The Bluetooth stack is not currently connected to a remote device. */ BT_SENDPACKET_ChannelNotOpen = 2, /**< The given channel is not currently in the Open state. */ }; /* Type Defines: */ - /** Type define for a Bluetooth ACL channel information structure. This structure contains all the relevent + /** Type define for a Bluetooth ACL channel information structure. This structure contains all the relevant * information on an ACL channel for data transmission and reception by the stack. */ typedef struct @@ -117,7 +117,7 @@ uint16_t ConnectionHandle; /**< Connection handle to the remote device, used internally in the stack. */ uint8_t RemoteAddress[6]; /**< Bluetooth device address of the attached remote device. */ Bluetooth_Channel_t Channels[BLUETOOTH_MAX_OPEN_CHANNELS]; /**< Channel information structures for the connection. */ - uint8_t SignallingIdentifier; /**< Next Signalling Channel unique command sequence identifier. */ + uint8_t SignalingIdentifier; /**< Next Signaling Channel unique command sequence identifier. */ } Bluetooth_Connection_t; /** Local Bluetooth device information structure, for the defining of local device characteristics for the Bluetooth stack. */ diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c index 0f9d63cff2..d091676aad 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c @@ -68,7 +68,7 @@ RFCOMM_Channel_t RFCOMM_Channels[RFCOMM_MAX_OPEN_CHANNELS]; /** Initializes the RFCOMM service, ready for new connections from a SDP client. */ void RFCOMM_Initialize(void) { - /* Reset the RFCOMM channel structures, to invalidate any confiured RFCOMM channels */ + /* Reset the RFCOMM channel structures, to invalidate any configured RFCOMM channels */ for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++) RFCOMM_Channels[i].State = RFCOMM_Channel_Closed; } @@ -115,7 +115,7 @@ void RFCOMM_ServiceChannels(Bluetooth_Channel_t* const ACLChannel) /** Processes an incoming RFCOMM packet on an ACL channel which has been previously opened between the local and * a remote device to handle RFCOMM traffic. * - * \param[in] Data Incomming packet data containing the RFCOMM packet + * \param[in] Data Incoming packet data containing the RFCOMM packet * \param[in] ACLChannel ACL channel the request was issued to by the remote device */ void RFCOMM_ProcessPacket(void* Data, Bluetooth_Channel_t* const ACLChannel) diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c b/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c index 47dc871b98..eb501f7096 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c @@ -52,11 +52,11 @@ const ServiceAttributeTable_t* SDP_Services_Table[] PROGMEM = /** Base UUID value common to all standardized Bluetooth services */ const UUID_t BaseUUID PROGMEM = {0x00000000, BASE_80BIT_UUID}; -/** Main Service Discovery Protocol packet processing routine. This function processes incomming SDP packets from +/** Main Service Discovery Protocol packet processing routine. This function processes incoming SDP packets from * a connected Bluetooth device, and sends back appropriate responses to allow other devices to determine the * services the local device exposes. * - * \param[in] Data Incomming packet data containing the SDP request + * \param[in] Data Incoming packet data containing the SDP request * \param[in] Channel ACL channel the request was issued to by the remote device */ void SDP_ProcessPacket(void* Data, Bluetooth_Channel_t* const Channel) @@ -99,7 +99,7 @@ static void SDP_ProcessServiceSearch(const SDP_PDUHeader_t* const SDPHeader, Blu uint8_t TotalUUIDs = SDP_GetUUIDList(UUIDList, &CurrentParameter); BT_SDP_DEBUG(2, "-- Total UUIDs: %d", TotalUUIDs); - /* Retrieve the maximum service record reponse count from the request */ + /* Retrieve the maximum service record response count from the request */ uint16_t MaxServiceRecordCount = SDP_ReadData16(&CurrentParameter); BT_SDP_DEBUG(2, "-- Max Return Service Count: 0x%04X", MaxServiceRecordCount); @@ -179,7 +179,7 @@ static void SDP_ProcessServiceAttribute(const SDP_PDUHeader_t* const SDPHeader, uint32_t ServiceHandle = SDP_ReadData32(&CurrentParameter); BT_SDP_DEBUG(2, "-- Service Handle: 0x%08lX", ServiceHandle); - /* Retrieve the maximum Attribute reponse size from the request */ + /* Retrieve the maximum Attribute response size from the request */ uint16_t MaxAttributeSize = SDP_ReadData16(&CurrentParameter); BT_SDP_DEBUG(2, "-- Max Return Attribute Bytes: 0x%04X", MaxAttributeSize); @@ -270,7 +270,7 @@ static void SDP_ProcessServiceSearchAttribute(const SDP_PDUHeader_t* const SDPHe uint8_t TotalUUIDs = SDP_GetUUIDList(UUIDList, &CurrentParameter); BT_SDP_DEBUG(2, "-- Total UUIDs: %d", TotalUUIDs); - /* Retrieve the maximum Attribute reponse size from the request */ + /* Retrieve the maximum Attribute response size from the request */ uint16_t MaxAttributeSize = SDP_ReadData16(&CurrentParameter); BT_SDP_DEBUG(2, "-- Max Return Attribute Bytes: 0x%04X", MaxAttributeSize); @@ -388,7 +388,7 @@ static uint16_t SDP_AddListedAttributesToResponse(const ServiceAttributeTable_t* return TotalResponseSize; } -/** Adds the given attribute ID and value to the reponse buffer, and advances the response buffer pointer past the added data. +/** Adds the given attribute ID and value to the response buffer, and advances the response buffer pointer past the added data. * * \param[in] AttributeID Attribute ID to add to the response buffer * \param[in] AttributeValue Pointer to the start of the Attribute's value, located in PROGMEM diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h b/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h index 52795b847a..548f3d5579 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h @@ -138,7 +138,7 @@ *BufferPos += sizeof(uint32_t); } - /** Reads 8 bits of raw data frpm the given buffer, incrementing the buffer position afterwards. + /** Reads 8 bits of raw data from the given buffer, incrementing the buffer position afterwards. * * \param[in, out] BufferPos Current position in the buffer where the data is to be read from * @@ -152,7 +152,7 @@ return Data; } - /** Reads 16 bits of raw data frpm the given buffer, incrementing the buffer position afterwards. + /** Reads 16 bits of raw data from the given buffer, incrementing the buffer position afterwards. * * \param[in, out] BufferPos Current position in the buffer where the data is to be read from * @@ -166,7 +166,7 @@ return Data; } - /** Reads 32 bits of raw data frpm the given buffer, incrementing the buffer position afterwards. + /** Reads 32 bits of raw data from the given buffer, incrementing the buffer position afterwards. * * \param[in, out] BufferPos Current position in the buffer where the data is to be read from * @@ -190,7 +190,7 @@ * * \param[in, out] BufferPos Pointer to a buffer where the container header is to be placed * - * \return Pointer to the 16-bit size value of the contaner header, which has been pre-zeroed + * \return Pointer to the 16-bit size value of the container header, which has been pre-zeroed */ static inline uint16_t* SDP_AddSequence16(void** BufferPos) { diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c b/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c index c6dee66397..93f5519feb 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c @@ -102,7 +102,7 @@ const struct }; /** Serial Port Profile attribute, listing the Browse Group List UUIDs which this service is a member of. - * Browse Group UUIDs give a way to group together services within a device in a simple heirachy, so that + * Browse Group UUIDs give a way to group together services within a device in a simple hierarchy, so that * a SDP client can progressively narrow down an general browse to a specific service which it requires. */ const struct diff --git a/Projects/Webserver/Webserver.txt b/Projects/Webserver/Webserver.txt index f20189c620..7f65876699 100644 --- a/Projects/Webserver/Webserver.txt +++ b/Projects/Webserver/Webserver.txt @@ -80,7 +80,7 @@ * * ENABLE_TELNET_SERVER * Makefile CDEFS - * When defined, this enables the TELNET server in addition to the HTTP webserver, which listens for incomming connections + * When defined, this enables the TELNET server in addition to the HTTP webserver, which listens for incoming connections * and processes user commands. * *