From 3549415116339a0af15d54437c07d188d6de6ad2 Mon Sep 17 00:00:00 2001 From: zwnk Date: Wed, 15 Aug 2018 19:31:59 -0300 Subject: [PATCH] Keyboard: dactyl manuform 6x6 added (#3662) * mouse layer keys shifted * mouse layer keys shifted * manuform 5x6 added * mouse layer keys shifted * manuform 5x6 added * dactyl_manuform 5x6 keymap added * reorg. dactyl manuform folder * removed LAYOUTS = ortho_4x12 for 4x5 * Rows and Cols in config.h fixed * MASTER_LEFT * 5x6 matrix fixed * keymap updated * removed the i2c, serial, split_util and matrix files and inserted SPLIT_KEYBOARD * default keymap for dactyl_manuform 5x6 * Fixes for Dactyl Manuform * Add/update default keymap * readme dactyl_manuform updated * links to keymaps added * dactyl_manuform 6x6 added. README updated * dactyl_manuform README updated * cleanup * more cleanup --- .../handwired/dactyl_manuform/4x5/readme.md | 161 ------------------ .../5x6/keymaps/default/keymap.c | 25 +-- .../5x6/keymaps/impstyle/keymap.c | 46 ++--- .../handwired/dactyl_manuform/5x6/readme.md | 142 --------------- keyboards/handwired/dactyl_manuform/6x6/6x6.c | 23 +++ keyboards/handwired/dactyl_manuform/6x6/6x6.h | 44 +++++ .../handwired/dactyl_manuform/6x6/config.h | 33 ++++ .../6x6/keymaps/default/config.h | 27 +++ .../6x6/keymaps/default/keymap.c | 57 +++++++ .../handwired/dactyl_manuform/6x6/rules.mk | 21 +++ .../dactyl_manuform/dactyl_manuform.h | 5 +- keyboards/handwired/dactyl_manuform/readme.md | 51 ++++-- 12 files changed, 266 insertions(+), 369 deletions(-) delete mode 100644 keyboards/handwired/dactyl_manuform/4x5/readme.md delete mode 100644 keyboards/handwired/dactyl_manuform/5x6/readme.md create mode 100644 keyboards/handwired/dactyl_manuform/6x6/6x6.c create mode 100644 keyboards/handwired/dactyl_manuform/6x6/6x6.h create mode 100644 keyboards/handwired/dactyl_manuform/6x6/config.h create mode 100644 keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h create mode 100644 keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c create mode 100644 keyboards/handwired/dactyl_manuform/6x6/rules.mk diff --git a/keyboards/handwired/dactyl_manuform/4x5/readme.md b/keyboards/handwired/dactyl_manuform/4x5/readme.md deleted file mode 100644 index aab792f224..0000000000 --- a/keyboards/handwired/dactyl_manuform/4x5/readme.md +++ /dev/null @@ -1,161 +0,0 @@ -Dactyl Manuform 4x5 -====== -the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. -![Imgur](https://i.imgur.com/7y0Vbyd.jpg) - - -## First Time Setup - -Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: - -``` -$ make handwired/dactyl_manuform/4x5:dvorak -``` - -You will see a lot of output and if everything worked correctly you will see the built hex file: - -``` -dactyl_manuform_4x5_dvorak.hex -``` - -If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: - -``` -$ make handwired/dactyl_manuform/4x5:YOUR_KEYMAP_NAME -``` - -If everything worked correctly you will see a file: - -``` -dactyl_manuform_4x5_YOUR_KEYMAP_NAME.hex -``` - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. - -## Keymaps -Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. -### Qwerty and Dvorak -Qwerty base layer: -![Imgur](https://i.imgur.com/Yb5e7dS.png) -Dvorak base layer: -![Imgur](https://i.imgur.com/CpuZptB.png) -Both keymaps have the same Raise and Lower layers: -Raise Layer -![Imgur](https://i.imgur.com/nOqePK5.png) -Lower Layer -![Imgur](https://i.imgur.com/WSshkYc.png) - -Required Hardware ------------------ - -Apart from diodes and key switches for the keyboard matrix in each half, you -will need: - -* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. -* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable - -Alternatively, you can use any sort of cable and socket that has at least 3 -wires. If you want to use I2C to communicate between halves, you will need a -cable with at least 4 wires and 2x 4.7kΩ pull-up resistors - -Optional Hardware ------------------ -A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. - -Wiring ------- - -The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. -PD0 on the ATmega32u4) between the two Pro Micros. - -Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro -and modify the `matrix.c` accordingly. - -The wiring for serial: - -![serial wiring](https://i.imgur.com/C3D1GAQ.png) - -The wiring for i2c: - -![i2c wiring](https://i.imgur.com/Hbzhc6E.png) - -The pull-up resistors may be placed on either half. It is also possible -to use 4 resistors and have the pull-ups in both halves, but this is -unnecessary in simple use cases. - -You can change your configuration between serial and i2c by modifying your `config.h` file. - -Notes on Software Configuration -------------------------------- - -the keymaps in here are for the 4x5 layout of the keyboard only. - -Flashing -------- -From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. -Example: `make lets_split/rev2:default:avrdude` - - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) - -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. - -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. - - -Notes on Using Pro Micro 3.3V ------------------------------ - -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. - -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: - -``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. -``` diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c index d0bcbd4e6b..7be6a5bc71 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c @@ -1,27 +1,13 @@ -#include QMK_KEYBOARD_H +/* A standard layout for the Dactyl Manuform 5x6 Keyboard */ +#include QMK_KEYBOARD_H extern keymap_config_t keymap_config; -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. #define _QWERTY 0 #define _LOWER 1 #define _RAISE 2 -#define SFT_ESC SFT_T(KC_ESC) -#define CTL_BSPC CTL_T(KC_BSPC) -#define ALT_SPC ALT_T(KC_SPC) -#define SFT_ENT SFT_T(KC_ENT) - -#define KC_ML KC_MS_LEFT -#define KC_MR KC_MS_RIGHT -#define KC_MU KC_MS_UP -#define KC_MD KC_MS_DOWN -#define KC_MB1 KC_MS_BTN1 -#define KC_MB2 KC_MS_BTN1 #define RAISE MO(_RAISE) #define LOWER MO(_LOWER) @@ -31,8 +17,6 @@ extern keymap_config_t keymap_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_QWERTY] = LAYOUT_5x6( KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, @@ -54,7 +38,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______, _______,_______, _______,_______, _______,_______, _______,_______, _______,_______ -), + + ), [_RAISE] = LAYOUT_5x6( KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , @@ -66,6 +51,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______, _______,_______, _______,_______, _______,_______ ), +}; - }; diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c index 0282ccc7f9..9a89212fec 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c @@ -1,26 +1,14 @@ + +/* A QWERTY 3 Layer layout for the Dactyl Manuform 5x6 Keyboard */ + #include QMK_KEYBOARD_H extern keymap_config_t keymap_config; -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. #define _QWERTY 0 #define _LOWER 1 #define _RAISE 2 -#define SFT_ESC SFT_T(KC_ESC) -#define CTL_BSPC CTL_T(KC_BSPC) -#define ALT_SPC ALT_T(KC_SPC) -#define SFT_ENT SFT_T(KC_ENT) - -#define KC_ML KC_MS_LEFT -#define KC_MR KC_MS_RIGHT -#define KC_MU KC_MS_UP -#define KC_MD KC_MS_DOWN -#define KC_MB1 KC_MS_BTN1 -#define KC_MB2 KC_MS_BTN1 #define RAISE MO(_RAISE) #define LOWER MO(_LOWER) @@ -37,11 +25,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, - RAISE,KC_SPC, KC_ENT, LOWER, + RAISE,KC_SPC, KC_ENT, LOWER, KC_TAB,KC_HOME, KC_END, KC_DEL, - KC_BSPC, KC_GRV, KC_LGUI, KC_LALT + KC_BSPC,KC_GRV, KC_LGUI, KC_LALT ), + [_LOWER] = LAYOUT_5x6( KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, @@ -51,23 +40,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______,_______, _______,_______, _______,_______, _______,_______, _______,_______, _______,_______ + ), [_RAISE] = LAYOUT_5x6( - KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , - _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, - _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, - _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, - _______,_______, KC_EQL ,_______, - _______,_______, _______,_______, - _______,_______, _______,_______, - _______,_______, _______,_______ + KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, + _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, + _______,_______, KC_EQL ,_______, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ ), }; - - -void persistant_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} diff --git a/keyboards/handwired/dactyl_manuform/5x6/readme.md b/keyboards/handwired/dactyl_manuform/5x6/readme.md deleted file mode 100644 index eb76a7150e..0000000000 --- a/keyboards/handwired/dactyl_manuform/5x6/readme.md +++ /dev/null @@ -1,142 +0,0 @@ -Dactyl Manuform 5x6 -====== -the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. -![Imgur](https://i.imgur.com/7y0Vbyd.jpg) - - -## First Time Setup - -Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: - -``` -$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME -``` - -If everything worked correctly you will see a file: - -``` -dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex -``` - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. - -## Keymaps -Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. -### Impstyle - - - -Required Hardware ------------------ - -Apart from diodes and key switches for the keyboard matrix in each half, you -will need: - -* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. -* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable - -Alternatively, you can use any sort of cable and socket that has at least 3 -wires. If you want to use I2C to communicate between halves, you will need a -cable with at least 4 wires and 2x 4.7kΩ pull-up resistors - -Optional Hardware ------------------ -A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. - -Wiring ------- - -The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. -PD0 on the ATmega32u4) between the two Pro Micros. - -Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro -and modify the `matrix.c` accordingly. - -The wiring for serial: - -![serial wiring](https://i.imgur.com/C3D1GAQ.png) - -The wiring for i2c: - -![i2c wiring](https://i.imgur.com/Hbzhc6E.png) - -The pull-up resistors may be placed on either half. It is also possible -to use 4 resistors and have the pull-ups in both halves, but this is -unnecessary in simple use cases. - -You can change your configuration between serial and i2c by modifying your `config.h` file. - -Notes on Software Configuration -------------------------------- - -the keymaps in here are for the 4x5 layout of the keyboard only. - -Flashing -------- -From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. -Example: `make lets_split/rev2:default:avrdude` - - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) - -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. - -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. - - -Notes on Using Pro Micro 3.3V ------------------------------ - -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. - -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: - -``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. -``` diff --git a/keyboards/handwired/dactyl_manuform/6x6/6x6.c b/keyboards/handwired/dactyl_manuform/6x6/6x6.c new file mode 100644 index 0000000000..9eb27531a8 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/6x6.c @@ -0,0 +1,23 @@ +#include "6x6.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + diff --git a/keyboards/handwired/dactyl_manuform/6x6/6x6.h b/keyboards/handwired/dactyl_manuform/6x6/6x6.h new file mode 100644 index 0000000000..c2980b3d31 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/6x6.h @@ -0,0 +1,44 @@ +#pragma once + +#include "dactyl_manuform.h" +#include "quantum.h" + + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +#define LAYOUT_6x6(\ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ + L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45, \ + L52, L53, R52, R53, \ + L54, L55, R50, R51, \ + L64, L65, R60, R61, \ + L62, L63, R62, R63 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { L40, L41, L42, L43, L44, L45 }, \ + { KC_NO, KC_NO, L52, L53, L54, L55 }, \ + { KC_NO, KC_NO, L62, L63, L64, L65 }, \ +\ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 }, \ + { R40, R41, R42, R43, R44, R45 }, \ + { R50, R51, R52, R53, KC_NO, KC_NO },\ + { R60, R61, R62, R63, KC_NO, KC_NO }, \ + } + + diff --git a/keyboards/handwired/dactyl_manuform/6x6/config.h b/keyboards/handwired/dactyl_manuform/6x6/config.h new file mode 100644 index 0000000000..9bb7b07bf2 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/config.h @@ -0,0 +1,33 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + + +#define PRODUCT Dactyl-Manuform (6x6) + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 14 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } +#define MATRIX_ROW_PINS { F5, F6, F7, B1, B3, B2, B6 } diff --git a/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h new file mode 100644 index 0000000000..29ab59ad66 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h @@ -0,0 +1,27 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#pragma once + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define MASTER_RIGHT +//#define EE_HANDS +// Rows are doubled-up diff --git a/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c new file mode 100644 index 0000000000..1b1cbd4aea --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c @@ -0,0 +1,57 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 + +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT_6x6( + + KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 , + KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, + KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, + KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, + KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, + KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, + RAISE,KC_SPC, KC_ENT, LOWER, + KC_TAB,KC_HOME, KC_END, KC_DEL, + KC_BSPC, KC_GRV, KC_LGUI, KC_LALT + ), + + [_LOWER] = LAYOUT_6x6( + + KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 , + KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, + _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE, + _______,_______,_______,_______,_______,_______, _______, KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS, + _______,KC_PSCR, _______, KC_P0, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ + ), + + [_RAISE] = LAYOUT_6x6( + + KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , + _______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, + _______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, + + _______,_______, KC_EQL ,_______, + _______,_______, _______,_______, + _______,_______, _______,_______, + _______,_______, _______,_______ + ), + +}; + diff --git a/keyboards/handwired/dactyl_manuform/6x6/rules.mk b/keyboards/handwired/dactyl_manuform/6x6/rules.mk new file mode 100644 index 0000000000..14b6e1e4e3 --- /dev/null +++ b/keyboards/handwired/dactyl_manuform/6x6/rules.mk @@ -0,0 +1,21 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h index 6c23e9143d..3222e6a617 100644 --- a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h +++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h @@ -1,7 +1,10 @@ #pragma once -#ifdef KEYBOARD_handwired_dactyl_manuform_5x6 + +#ifdef KEYBOARD_handwired_dactyl_manuform_6x6 + #include "6x6.h" +#elif KEYBOARD_handwired_dactyl_manuform_5x6 #include "5x6.h" #elif KEYBOARD_handwired_dactyl_manuform_4x5 #include "4x5.h" diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md index eb76a7150e..3f72bd6b21 100644 --- a/keyboards/handwired/dactyl_manuform/readme.md +++ b/keyboards/handwired/dactyl_manuform/readme.md @@ -1,32 +1,55 @@ -Dactyl Manuform 5x6 +Dactyl Manuform (4x5, 5x6, 6x6) ====== the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. ![Imgur](https://i.imgur.com/7y0Vbyd.jpg) ## First Time Setup - +----------------- Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: +Depending on your Layout chose one of the follwing commands: + ``` -$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME +$ make handwired/dactyl_manuform/YOUR_LAYOUT:YOUR_KEYMAP_NAME +``` + +example: +``` +$ make handwired/dactyl_manuform/4x5:default ``` If everything worked correctly you will see a file: ``` -dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex +dactyl_manuform_YOUR_LAYOUT_YOUR_KEYMAP_NAME.hex ``` For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. + ## Keymaps -Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. -### Impstyle +----------------- +### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/) + +#### Default +Simple QWERTY layout with 3 Layers. +#### Dvorak + +### [Keymaps 5x6](/keyboards/handwired/dactyl_manuform/5x6/keymaps/) +#### Default +Just a copy of the Impstyle keymap. Feel free to adjust it. +#### Impstyle +A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master. -Required Hardware +### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/) + +#### Default +Simple QWERTY layout with 3 Layers. + +##Required Hardware ----------------- Apart from diodes and key switches for the keyboard matrix in each half, you @@ -39,11 +62,11 @@ Alternatively, you can use any sort of cable and socket that has at least 3 wires. If you want to use I2C to communicate between halves, you will need a cable with at least 4 wires and 2x 4.7kΩ pull-up resistors -Optional Hardware +##Optional Hardware ----------------- A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. -Wiring +##Wiring ------ The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. @@ -66,18 +89,18 @@ unnecessary in simple use cases. You can change your configuration between serial and i2c by modifying your `config.h` file. -Notes on Software Configuration +##Notes on Software Configuration ------------------------------- the keymaps in here are for the 4x5 layout of the keyboard only. -Flashing +##Flashing ------- -From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. -Example: `make lets_split/rev2:default:avrdude` + +To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing) -Choosing which board to plug the USB cable into (choosing Master) +##Choosing which board to plug the USB cable into (choosing Master) -------- Because the two boards are identical, the firmware has logic to differentiate the left and right board.