Added board hardware driver support for the Benito programmer.

LUFA/Common/BoardTypes.h

@@ -98,9 +98,12 @@
 			/** Selects the Teensy (all versions) specific board drivers, including the driver for the board LEDs. */
 			#define BOARD_TEENSY        11
 			
-			/** Selects the USBTINY MKII specific board drivers, , including the driver for the board LEDs. */
+			/** Selects the USBTINY MKII specific board drivers, including the driver for the board LEDs. */
 			#define BOARD_USBTINYMKII   12
 			
+			/** Selects the Benito specific board drivers, including the driver for the board LEDs. */
+			#define BOARD_BENITO        13
+
 			#if !defined(__DOXYGEN__)
 				#define BOARD_          BOARD_NONE
 				

LUFA/Drivers/Board/BENITO/LEDs.h

@@ -28,9 +28,25 @@
   this software.
 */
 
-/*
-   Board LEDs driver for the Benito board, from www.dorkbotpdx.org.
-*/
+/** \file
+ *  \brief Board specific LED driver header for the Benito.
+ *
+ *  Board specific LED driver header for the Benito (http://dorkbotpdx.org/wiki/benito).
+ *
+ *  \note This file should not be included directly. It is automatically included as needed by the LEDs driver
+ *        dispatch header located in LUFA/Drivers/Board/LEDs.h.
+ */
+
+/** \ingroup Group_LEDs
+ *  @defgroup Group_LEDs_BENITO BENITO
+ *
+ *  Board specific LED driver header for the Benito (http://dorkbotpdx.org/wiki/benito).
+ *
+ *  \note This file should not be included directly. It is automatically included as needed by the LEDs driver
+ *        dispatch header located in LUFA/Drivers/Board/LEDs.h.
+ *
+ *  @{
+ */
 
 #ifndef __LEDS_BENITO_H__
 #define __LEDS_BENITO_H__
@@ -108,3 +124,5 @@
 		#endif
 		
 #endif
+
+/** @} */

LUFA/Drivers/Board/LEDs.h

@@ -53,7 +53,8 @@
  *  provides an interface to configure, test and change the status of all the board LEDs.
  *
  *  If the BOARD value is set to BOARD_USER, this will include the /Board/Dataflash.h file in the user project
- *  directory. Otherwise, it will include the appropriate built in board driver header file.
+ *  directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value
+ *  is set to BOARD_NONE, this driver is silently disabled.
  *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
@@ -106,6 +107,8 @@
 		#include "TEENSY/LEDs.h"
 	#elif (BOARD == BOARD_USBTINYMKII)
 		#include "USBTINYMKII/LEDs.h"
+	#elif (BOARD == BOARD_BENITO)
+		#include "BENITO/LEDs.h"
 	#elif (BOARD == BOARD_USER)
 		#include "Board/LEDs.h"
 	#endif

LUFA/ManPages/ChangeLog.txt

@@ -13,6 +13,7 @@
   *  - Added board hardware driver support for the PJRC Teensy line of USB AVR boards
   *  - Added new Relay Controller Board project (thanks to OBinou)
   *  - Added board hardware driver support for Tom's USBTINY MKII programmer
+  *  - Added board hardware driver support for the Benito programmer
   *
   *  <b>Changed:</b>
   *  - AVRISP programmer project now has a more robust timeout system, allowing for an increase of the software USART speed

Projects/Benito/makefile

@@ -66,7 +66,7 @@ MCU = atmega32u2
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USER
+BOARD  = BENITO
 
 
 # Processor frequency.