From 3808f5c36d0ee183e9825e645cc984f1c6047ef5 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sat, 9 Jun 2012 20:33:56 +0000 Subject: [PATCH] Spell check source code, fix mistakes. --- Demos/Device/ClassDriver/AudioInput/AudioInput.c | 4 ++-- Demos/Device/ClassDriver/AudioOutput/AudioOutput.c | 4 ++-- .../TestAndMeasurement/TestAndMeasurement.c | 8 ++++---- .../Device/LowLevel/KeyboardMouse/KeyboardMouse.c | 2 +- Demos/Host/ClassDriver/MIDIHost/MIDIHost.c | 2 +- .../MassStorageHost/Lib/MassStoreCommands.c | 2 +- LUFA/Common/ArchitectureSpecific.h | 2 +- LUFA/Common/Attributes.h | 2 +- LUFA/Drivers/Board/Buttons.h | 2 +- LUFA/Drivers/Board/Joystick.h | 2 +- LUFA/Drivers/Board/LEDs.h | 4 ++-- LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h | 2 +- LUFA/Drivers/USB/Class/Device/AudioClassDevice.h | 4 ++-- LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h | 2 +- .../USB/Class/Host/AndroidAccessoryClassHost.h | 4 ++-- LUFA/Drivers/USB/Class/Host/HIDClassHost.h | 2 +- LUFA/Drivers/USB/Class/Host/MIDIClassHost.h | 2 +- LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h | 2 +- LUFA/Drivers/USB/Core/ConfigDescriptor.h | 2 +- LUFA/Drivers/USB/Core/Events.h | 4 ++-- LUFA/Drivers/USB/Core/HostStandardReq.h | 2 +- LUFA/Drivers/USB/Core/StdDescriptors.h | 2 +- LUFA/Drivers/USB/Core/UC3/USBController_UC3.h | 2 +- LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h | 2 +- LUFA/Platform/Platform.h | 4 ++-- LUFA/Platform/UC3/ClockManagement.h | 14 +++++++------- LUFA/Platform/UC3/InterruptManagement.h | 4 ++-- LUFA/Platform/XMEGA/ClockManagement.h | 6 +++--- Projects/AVRISP-MKII/AVRISPDescriptors.c | 4 ++-- Projects/Magstripe/Lib/CircularBitBuffer.h | 2 +- Projects/Magstripe/Lib/MagstripeHW.h | 2 +- Projects/SerialToLCD/Lib/HD44780.c | 2 +- Projects/SerialToLCD/Lib/HD44780.h | 2 +- Projects/SerialToLCD/SerialToLCD.c | 2 +- Projects/TempDataLogger/Lib/DataflashManager.h | 2 +- Projects/TempDataLogger/TempDataLogger.c | 2 +- .../TempLogHostApp/DataLoggerSettings.Designer.cs | 2 +- .../TempLogHostApp/DataLoggerSettings.cs | 4 ++-- .../TempLogHostApp/Properties/AssemblyInfo.cs | 2 +- Projects/Webserver/Lib/DataflashManager.h | 2 +- Projects/Webserver/Lib/uip/uip.c | 4 ++-- 41 files changed, 63 insertions(+), 63 deletions(-) diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/Demos/Device/ClassDriver/AudioInput/AudioInput.c index 953ecf8b68..66d78b8c87 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.c +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.c @@ -175,7 +175,7 @@ void EVENT_USB_Device_ControlRequest(void) * * When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for * the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations - * to indicate the size of the retreived data. + * to indicate the size of the retrieved data. * * \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value * of the \c DataLength parameter. @@ -243,7 +243,7 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* * * When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for * the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations - * to indicate the size of the retreived data. + * to indicate the size of the retrieved data. * * \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value * of the \c DataLength parameter. diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c index 82f664a9b2..1869ac949e 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c @@ -212,7 +212,7 @@ void EVENT_USB_Device_ControlRequest(void) * * When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for * the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations - * to indicate the size of the retreived data. + * to indicate the size of the retrieved data. * * \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value * of the \c DataLength parameter. @@ -280,7 +280,7 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* * * When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for * the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations - * to indicate the size of the retreived data. + * to indicate the size of the retrieved data. * * \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value * of the \c DataLength parameter. diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c index 5102f101c7..027264ab5f 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c @@ -71,7 +71,7 @@ static uint16_t LastTransferLength = 0; static uint8_t NextResponseBuffer[64]; /** Indicates the length of the next response to send */ -static uint8_t NextReponseLen; +static uint8_t NextResponseLen; /** Main program entry point. This routine contains the overall program flow, including initial * setup of all components and the main program loop. @@ -326,16 +326,16 @@ void ProcessSentMessage(uint8_t* const Data, const uint8_t Length) if (strncmp((char*)Data, "*IDN?", 5) == 0) strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO"); - NextReponseLen = strlen((char*)NextResponseBuffer); + NextResponseLen = strlen((char*)NextResponseBuffer); } uint8_t GetNextMessage(uint8_t* const Data) { strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO"); - NextReponseLen = strlen((char*)NextResponseBuffer); + NextResponseLen = strlen((char*)NextResponseBuffer); // --- - uint8_t DataLen = MIN(NextReponseLen, 64); + uint8_t DataLen = MIN(NextResponseLen, 64); strlcpy((char*)Data, (char*)NextResponseBuffer, DataLen); diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c index a916659ea6..f932a32f30 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c @@ -181,7 +181,7 @@ void EVENT_USB_Device_ControlRequest(void) /** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard * LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT * endpoint, the processing code is placed here to avoid duplicating it and potentially having different - * behaviour depending on the method used to sent it. + * behavior depending on the method used to sent it. */ void Keyboard_ProcessLEDReport(const uint8_t LEDStatus) { diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c index 472d19aee7..04a945429b 100644 --- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c +++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c @@ -101,7 +101,7 @@ void SetupHardware(void) } /** Task to manage an enumerated USB MIDI device once connected, to display received - * note events from the host and send note changes in response to tbe board's joystick. + * note events from the host and send note changes in response to the board's joystick. */ void JoystickHost_Task(void) { diff --git a/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c b/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c index 390acfa90d..e2887f513a 100644 --- a/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c +++ b/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c @@ -283,7 +283,7 @@ static uint8_t MassStore_GetReturnedStatus(MS_CommandStatusWrapper_t* const SCSI /** Issues a Mass Storage class specific request to reset the attached device's Mass Storage interface, * readying the device for the next CBW. The Data endpoints are cleared of any STALL condition once this - * command completes sucessfuly. + * command completes successfully. * * \return A value from the USB_Host_SendControlErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails */ diff --git a/LUFA/Common/ArchitectureSpecific.h b/LUFA/Common/ArchitectureSpecific.h index 1a05be812c..9b719a2215 100644 --- a/LUFA/Common/ArchitectureSpecific.h +++ b/LUFA/Common/ArchitectureSpecific.h @@ -66,7 +66,7 @@ #if (ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA) || defined(__DOXYGEN__) #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__) /** Re-enables the AVR's JTAG bus in software, until a system reset. This will re-enable JTAG debugging - * interface after is has been disbled in software via \ref JTAG_DISABLE(). + * interface after is has been disabled in software via \ref JTAG_DISABLE(). * * \note This macro is not available for all architectures. */ diff --git a/LUFA/Common/Attributes.h b/LUFA/Common/Attributes.h index f4040b23e4..b058eed8f0 100644 --- a/LUFA/Common/Attributes.h +++ b/LUFA/Common/Attributes.h @@ -116,7 +116,7 @@ /** Forces the compiler to not automatically zero the given global variable on startup, so that the * current RAM contents is retained. Under most conditions this value will be random due to the - * behaviour of volatile memory once power is removed, but may be used in some specific circumstances, + * behavior of volatile memory once power is removed, but may be used in some specific circumstances, * like the passing of values back after a system watchdog reset. */ #define ATTR_NO_INIT __attribute__ ((section (".noinit"))) diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h index 1b70a6bd58..73ccb41946 100644 --- a/LUFA/Drivers/Board/Buttons.h +++ b/LUFA/Drivers/Board/Buttons.h @@ -160,7 +160,7 @@ */ static inline void Buttons_Init(void); - /** Disables the buttons driver, releasing the I/O pins back to their default high-impedence input mode. */ + /** Disables the buttons driver, releasing the I/O pins back to their default high-impedance input mode. */ static inline void Buttons_Disable(void); /** Returns a mask indicating which board buttons are currently pressed. diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h index 63d28e8372..2f90a9ca3f 100644 --- a/LUFA/Drivers/Board/Joystick.h +++ b/LUFA/Drivers/Board/Joystick.h @@ -126,7 +126,7 @@ */ static inline void Joystick_Init(void); - /** Disables the joystick driver, releasing the I/O pins back to their default high-impedence input mode. */ + /** Disables the joystick driver, releasing the I/O pins back to their default high-impedance input mode. */ static inline void Joystick_Disable(void); /** Returns the current status of the joystick, as a mask indicating the direction the joystick is diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h index 97cb81a50e..21f89aa58a 100644 --- a/LUFA/Drivers/Board/LEDs.h +++ b/LUFA/Drivers/Board/LEDs.h @@ -63,7 +63,7 @@ * * \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If * a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect. - * If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D + * If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D * switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when * a non-existing LED is referenced in application code. Note that this means that it is possible to make * compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers) @@ -221,7 +221,7 @@ */ static inline void LEDs_Init(void); - /** Disables the board LED driver, releasing the I/O pins back to their default high-impedence input mode. */ + /** Disables the board LED driver, releasing the I/O pins back to their default high-impedance input mode. */ static inline void LEDs_Disable(void); /** Turns on the LEDs specified in the given LED mask. diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h index c04d2ba8cb..d85fddc28c 100644 --- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h @@ -248,7 +248,7 @@ #define ADC_INT_TEMP_SENS ((1 << 8) | (0x07 << MUX0)) #endif - /** MUX mask define for the internal 1.1V bandgap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */ + /** MUX mask define for the internal 1.1V band-gap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */ #define ADC_1100MV_BANDGAP (0x1E << MUX0) /** Retrieves the ADC MUX mask for the given ADC channel number. diff --git a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h index a8bfc78331..52c5a1aa17 100644 --- a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h @@ -124,7 +124,7 @@ * * When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for * the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations - * to indicate the size of the retreived data. + * to indicate the size of the retrieved data. * * \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value * of the \c DataLength parameter. @@ -153,7 +153,7 @@ * * When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for * the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations - * to indicate the size of the retreived data. + * to indicate the size of the retrieved data. * * \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value * of the \c DataLength parameter. diff --git a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h index 2703600eaa..52aa9a15db 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h @@ -130,7 +130,7 @@ /** Flushes the MIDI send buffer, sending any queued MIDI events to the host. This should be called to override the - * \ref MIDI_Device_SendEventPacket() function's packing behaviour, to flush queued events. + * \ref MIDI_Device_SendEventPacket() function's packing behavior, to flush queued events. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state. * diff --git a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h index 678feda451..f55cd340ae 100644 --- a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h @@ -156,7 +156,7 @@ * * \param[in,out] AOAInterfaceInfo Pointer to a structure containing an AOA Class host configuration and state. * - * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum, or \ref AOA_ERROR_LOGICAL_CMD_FAILED if a logical error occured.. + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum, or \ref AOA_ERROR_LOGICAL_CMD_FAILED if a logical error occurred.. */ uint8_t AOA_Host_StartAccessoryMode(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); @@ -311,4 +311,4 @@ /** @} */ - + diff --git a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h index 882cc31df0..21868d9cfe 100644 --- a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h @@ -246,7 +246,7 @@ uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); /** Sets the idle period for the attached HID device to the specified interval. The HID idle period determines the rate - * at which the device should send a report, when no state changes have ocurred; i.e. on HID keyboards, this sets the + * at which the device should send a report, when no state changes have occurred; i.e. on HID keyboards, this sets the * hardware key repeat interval. * * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. diff --git a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h index b9e8611437..06ede7f22c 100644 --- a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h @@ -145,7 +145,7 @@ MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); /** Flushes the MIDI send buffer, sending any queued MIDI events to the device. This should be called to override the - * \ref MIDI_Host_SendEventPacket() function's packing behaviour, to flush queued events. Events are queued into the + * \ref MIDI_Host_SendEventPacket() function's packing behavior, to flush queued events. Events are queued into the * pipe bank until either the pipe bank is full, or \ref MIDI_Host_Flush() is called. This allows for multiple MIDI * events to be packed into a single pipe packet, increasing data throughput. * diff --git a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h index 330dd98143..8106988d24 100644 --- a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h @@ -215,7 +215,7 @@ * from the \ref USB_Modes_t enum. * * \param[in] Options Mask indicating the options which should be used when initializing the USB - * interface to control the USB interface's behaviour. This should be comprised of + * interface to control the USB interface's behavior. This should be comprised of * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device * mode speed. diff --git a/LUFA/Drivers/USB/Core/ConfigDescriptor.h b/LUFA/Drivers/USB/Core/ConfigDescriptor.h index 22e76cba97..97fb39b571 100644 --- a/LUFA/Drivers/USB/Core/ConfigDescriptor.h +++ b/LUFA/Drivers/USB/Core/ConfigDescriptor.h @@ -213,7 +213,7 @@ * function. The routine updates the position and remaining configuration descriptor bytes values * automatically. If a comparator routine fails a search, the descriptor pointer is retreated back * so that the next descriptor search invocation will start from the descriptor which first caused the - * original search to fail. This behaviour allows for one comparator to be used immediately after another + * original search to fail. This behavior allows for one comparator to be used immediately after another * has failed, starting the second search from the descriptor which failed the first. * * Comparator functions should be standard functions which accept a pointer to the header of the current diff --git a/LUFA/Drivers/USB/Core/Events.h b/LUFA/Drivers/USB/Core/Events.h index 8d627d4f2e..f468b7e654 100644 --- a/LUFA/Drivers/USB/Core/Events.h +++ b/LUFA/Drivers/USB/Core/Events.h @@ -189,7 +189,7 @@ * \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available. * this means that the current connection state is derived from the bus suspension and wake up events by default, * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * \n\n @@ -207,7 +207,7 @@ * \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller. * this means that the current connection state is derived from the bus suspension and wake up events by default, * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * \n\n diff --git a/LUFA/Drivers/USB/Core/HostStandardReq.h b/LUFA/Drivers/USB/Core/HostStandardReq.h index 5bdfe45efa..6ad0d2e58d 100644 --- a/LUFA/Drivers/USB/Core/HostStandardReq.h +++ b/LUFA/Drivers/USB/Core/HostStandardReq.h @@ -91,7 +91,7 @@ /* Global Variables: */ /** Indicates the currently set configuration number of the attached device. This indicates the currently - * selected configuration value if one has been set sucessfully, or 0 if no configuration has been selected. + * selected configuration value if one has been set successfully, or 0 if no configuration has been selected. * * To set a device configuration, call the \ref USB_Host_SetDeviceConfiguration() function. * diff --git a/LUFA/Drivers/USB/Core/StdDescriptors.h b/LUFA/Drivers/USB/Core/StdDescriptors.h index c46129c48f..031e01d289 100644 --- a/LUFA/Drivers/USB/Core/StdDescriptors.h +++ b/LUFA/Drivers/USB/Core/StdDescriptors.h @@ -105,7 +105,7 @@ /** \name USB Configuration Descriptor Attribute Masks */ //@{ /** Mask for the reserved bit in the Configuration Descriptor's \c ConfigAttributes field, which must be set on all - * devices for historial purposes. + * devices for historical purposes. */ #define USB_CONFIG_ATTR_RESERVED 0x80 diff --git a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h index 92e245ca29..4a5d267c82 100644 --- a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h @@ -172,7 +172,7 @@ * from the \ref USB_Modes_t enum. * * \param[in] Options Mask indicating the options which should be used when initializing the USB - * interface to control the USB interface's behaviour. This should be comprised of + * interface to control the USB interface's behavior. This should be comprised of * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device * mode speed. diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h index 25402e8553..e1c782db6b 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h @@ -180,7 +180,7 @@ * from the \ref USB_Modes_t enum. * * \param[in] Options Mask indicating the options which should be used when initializing the USB - * interface to control the USB interface's behaviour. This should be comprised of + * interface to control the USB interface's behavior. This should be comprised of * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device * mode speed. diff --git a/LUFA/Platform/Platform.h b/LUFA/Platform/Platform.h index 3bbd697ff5..db5f43535a 100644 --- a/LUFA/Platform/Platform.h +++ b/LUFA/Platform/Platform.h @@ -37,7 +37,7 @@ * management. * * User code may choose to either include this master dispatch header file to include all available platform - * driver header files for the current achitecture, or may choose to only include the specific platform driver + * driver header files for the current architecture, or may choose to only include the specific platform driver * modules required for a particular application. */ @@ -55,7 +55,7 @@ * system functions such as clock control and interrupt management. * * User code may choose to either include this master dispatch header file to include all available platform - * driver header files for the current achitecture, or may choose to only include the specific platform driver + * driver header files for the current architecture, or may choose to only include the specific platform driver * modules required for a particular application. * * \note The exact APIs and availability of sub-modules within the platform driver group may vary depending on the diff --git a/LUFA/Platform/UC3/ClockManagement.h b/LUFA/Platform/UC3/ClockManagement.h index 2cd96d2ecb..51cb0ff6d7 100644 --- a/LUFA/Platform/UC3/ClockManagement.h +++ b/LUFA/Platform/UC3/ClockManagement.h @@ -91,16 +91,16 @@ EXOSC_MODE_8MHZ_OR_MORE = AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G3, /**< External crystal oscillator equal to or faster than 8MHz. */ }; - /** Enum for the possible external oscillator statup times. */ + /** Enum for the possible external oscillator startup times. */ enum UC3_Extern_OSC_ClockStartup_t { EXOSC_START_0CLK = AVR32_PM_OSCCTRL0_STARTUP_0_RCOSC, /**< Immediate startup, no delay. */ - EXOSC_START_64CLK = AVR32_PM_OSCCTRL0_STARTUP_64_RCOSC, /**< Wait 64 clock cyles before startup for stability. */ - EXOSC_START_128CLK = AVR32_PM_OSCCTRL0_STARTUP_128_RCOSC, /**< Wait 128 clock cyles before startup for stability. */ - EXOSC_START_2048CLK = AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC, /**< Wait 2048 clock cyles before startup for stability. */ - EXOSC_START_4096CLK = AVR32_PM_OSCCTRL0_STARTUP_4096_RCOSC, /**< Wait 4096 clock cyles before startup for stability. */ - EXOSC_START_8192CLK = AVR32_PM_OSCCTRL0_STARTUP_8192_RCOSC, /**< Wait 8192 clock cyles before startup for stability. */ - EXOSC_START_16384CLK = AVR32_PM_OSCCTRL0_STARTUP_16384_RCOSC, /**< Wait 16384 clock cyles before startup for stability. */ + EXOSC_START_64CLK = AVR32_PM_OSCCTRL0_STARTUP_64_RCOSC, /**< Wait 64 clock cycles before startup for stability. */ + EXOSC_START_128CLK = AVR32_PM_OSCCTRL0_STARTUP_128_RCOSC, /**< Wait 128 clock cycles before startup for stability. */ + EXOSC_START_2048CLK = AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC, /**< Wait 2048 clock cycles before startup for stability. */ + EXOSC_START_4096CLK = AVR32_PM_OSCCTRL0_STARTUP_4096_RCOSC, /**< Wait 4096 clock cycles before startup for stability. */ + EXOSC_START_8192CLK = AVR32_PM_OSCCTRL0_STARTUP_8192_RCOSC, /**< Wait 8192 clock cycles before startup for stability. */ + EXOSC_START_16384CLK = AVR32_PM_OSCCTRL0_STARTUP_16384_RCOSC, /**< Wait 16384 clock cycles before startup for stability. */ }; /** Enum for the possible module clock sources. */ diff --git a/LUFA/Platform/UC3/InterruptManagement.h b/LUFA/Platform/UC3/InterruptManagement.h index 49bdaf8d5e..7441a3011b 100644 --- a/LUFA/Platform/UC3/InterruptManagement.h +++ b/LUFA/Platform/UC3/InterruptManagement.h @@ -93,7 +93,7 @@ /* Public Interface - May be used in end-application: */ /* Macros: */ - /** Converts a given interrupt index into its assocated interrupt group. + /** Converts a given interrupt index into its associated interrupt group. * * \param[in] IRQIndex Index of the interrupt request to convert. * @@ -101,7 +101,7 @@ */ #define INTC_IRQ_GROUP(IRQIndex) (IRQIndex / 32) - /** Converts a given interrupt index into its assocated interrupt line. + /** Converts a given interrupt index into its associated interrupt line. * * \param[in] IRQIndex Index of the interrupt request to convert. * diff --git a/LUFA/Platform/XMEGA/ClockManagement.h b/LUFA/Platform/XMEGA/ClockManagement.h index feef8898e1..c0553aeb9f 100644 --- a/LUFA/Platform/XMEGA/ClockManagement.h +++ b/LUFA/Platform/XMEGA/ClockManagement.h @@ -88,7 +88,7 @@ EXOSC_FREQ_16MHZ_MAX = OSC_FRQRANGE_12TO16_gc, /**< External crystal oscillator equal to or slower than 16MHz. */ }; - /** Enum for the possible external oscillator statup times. */ + /** Enum for the possible external oscillator startup times. */ enum XMEGA_Extern_OSC_ClockStartup_t { EXOSC_START_6CLK = OSC_XOSCSEL_EXTCLK_gc, /**< Wait 6 clock cycles before startup (external clock). */ @@ -141,7 +141,7 @@ * the oscillator is ready for use. * * \param[in] FreqRange Frequency range of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockFrequency_t. - * \param[in] Startup Statup time of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockStartup_t. + * \param[in] Startup Startup time of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockStartup_t. * * \return Boolean \c true if the external oscillator was successfully started, \c false if invalid parameters specified. */ @@ -347,7 +347,7 @@ * * \param[in] Source Clock source for the CPU core, a value from \ref XMEGA_System_ClockSource_t. * - * \return Boolean \c true if the CPU core clock was sucessfully altered, \c false if invalid parameters specified. + * \return Boolean \c true if the CPU core clock was successfully altered, \c false if invalid parameters specified. */ static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source) ATTR_ALWAYS_INLINE; static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source) diff --git a/Projects/AVRISP-MKII/AVRISPDescriptors.c b/Projects/AVRISP-MKII/AVRISPDescriptors.c index ab30c0eafe..9ad7c15457 100644 --- a/Projects/AVRISP-MKII/AVRISPDescriptors.c +++ b/Projects/AVRISP-MKII/AVRISPDescriptors.c @@ -38,7 +38,7 @@ #include "AVRISPDescriptors.h" #if defined(RESET_TOGGLES_LIBUSB_COMPAT) || defined(__DOXYGEN__) - /** Indicates if an external reset has ocurred and the compatibility mode needs to be altered */ + /** Indicates if an external reset has occurred and the compatibility mode needs to be altered */ static bool AVRISP_NeedCompatibilitySwitch ATTR_NO_INIT; /** Current AVRISP data IN endpoint address. */ @@ -255,7 +255,7 @@ uint16_t AVRISP_GetDescriptor(const uint16_t wValue, */ void CheckExternalReset(void) { - /* If an external reset occured, we need to change compatibility mode */ + /* If an external reset occurred, we need to change compatibility mode */ AVRISP_NeedCompatibilitySwitch = (MCUSR == (1 << EXTRF)); MCUSR = 0; diff --git a/Projects/Magstripe/Lib/CircularBitBuffer.h b/Projects/Magstripe/Lib/CircularBitBuffer.h index 6a0dcd53c6..d037a66de6 100644 --- a/Projects/Magstripe/Lib/CircularBitBuffer.h +++ b/Projects/Magstripe/Lib/CircularBitBuffer.h @@ -71,7 +71,7 @@ } BitBuffer_t; /* Function Prototypes: */ - /** Initialises or resets a given bit buffer, ready to store new bits. + /** Initializes or resets a given bit buffer, ready to store new bits. * * \param[in,out] Buffer Bit buffer to initialize */ diff --git a/Projects/Magstripe/Lib/MagstripeHW.h b/Projects/Magstripe/Lib/MagstripeHW.h index 177e26b01d..43e34443c6 100644 --- a/Projects/Magstripe/Lib/MagstripeHW.h +++ b/Projects/Magstripe/Lib/MagstripeHW.h @@ -77,7 +77,7 @@ /* Public Interface - May be used in end-application: */ /* Inline Functions: */ - /** Initialises the magnetic stripe card reader ports and pins so that the card reader + /** Initializes the magnetic stripe card reader ports and pins so that the card reader * device can be controlled and read by the card reader driver. This must be called before * trying to read any of the card reader's status lines. */ diff --git a/Projects/SerialToLCD/Lib/HD44780.c b/Projects/SerialToLCD/Lib/HD44780.c index 7bf989d2cd..0ffe7c4751 100644 --- a/Projects/SerialToLCD/Lib/HD44780.c +++ b/Projects/SerialToLCD/Lib/HD44780.c @@ -104,7 +104,7 @@ static void HD44780_PowerUp4Bit(void) _delay_us(50); } -void HD44780_Initialise(void) +void HD44780_Initialize(void) { PORTD &= ~ALL_BITS; DDRD |= ALL_BITS; diff --git a/Projects/SerialToLCD/Lib/HD44780.h b/Projects/SerialToLCD/Lib/HD44780.h index 680e69bcf6..165e32aab1 100644 --- a/Projects/SerialToLCD/Lib/HD44780.h +++ b/Projects/SerialToLCD/Lib/HD44780.h @@ -57,7 +57,7 @@ #define CMD_DISPLAY_ON 0x0C /* Function Prototypes: */ - void HD44780_Initialise(void); + void HD44780_Initialize(void); void HD44780_WriteData(const uint8_t c); void HD44780_WriteCommand(const uint8_t c); diff --git a/Projects/SerialToLCD/SerialToLCD.c b/Projects/SerialToLCD/SerialToLCD.c index 952e2d4f22..b94c5a4a29 100644 --- a/Projects/SerialToLCD/SerialToLCD.c +++ b/Projects/SerialToLCD/SerialToLCD.c @@ -148,7 +148,7 @@ void SetupHardware(void) USB_Init(); /* Power up the HD44780 Interface */ - HD44780_Initialise(); + HD44780_Initialize(); HD44780_WriteCommand(CMD_DISPLAY_ON); /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */ diff --git a/Projects/TempDataLogger/Lib/DataflashManager.h b/Projects/TempDataLogger/Lib/DataflashManager.h index 90236260c2..784ede47bb 100644 --- a/Projects/TempDataLogger/Lib/DataflashManager.h +++ b/Projects/TempDataLogger/Lib/DataflashManager.h @@ -53,7 +53,7 @@ #endif /* Defines: */ - /** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */ + /** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */ #define VIRTUAL_MEMORY_BYTES ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS) /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying diff --git a/Projects/TempDataLogger/TempDataLogger.c b/Projects/TempDataLogger/TempDataLogger.c index 9ead42ed36..eb63bc6a92 100644 --- a/Projects/TempDataLogger/TempDataLogger.c +++ b/Projects/TempDataLogger/TempDataLogger.c @@ -227,7 +227,7 @@ void EVENT_USB_Device_Connect(void) { LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - /* Close the log file so that the host has exclusive filesystem access */ + /* Close the log file so that the host has exclusive file system access */ CloseLogFile(); } diff --git a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs index 7b4249c421..58fac51449 100644 --- a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs +++ b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs @@ -157,7 +157,7 @@ this.MaximizeBox = false; this.MinimizeBox = false; this.Name = "frmDataloggerSettings"; - this.Text = "DataLogger"; + this.Text = "Datalogger"; this.Load += new System.EventHandler(this.frmDataloggerSettings_Load); ((System.ComponentModel.ISupportInitialize)(this.nudLogInterval)).EndInit(); this.ResumeLayout(false); diff --git a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs index 98e6006ff8..01e9fb6e7b 100644 --- a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs +++ b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs @@ -85,7 +85,7 @@ namespace Project1HostApp if (ConnectionHandle == null) { - MessageBox.Show("Error: Cannot connect to DataLogger device."); + MessageBox.Show("Error: Cannot connect to Datalogger device."); return; } @@ -115,7 +115,7 @@ namespace Project1HostApp if (ConnectionHandle == null) { - MessageBox.Show("Error: Cannot connect to DataLogger device."); + MessageBox.Show("Error: Cannot connect to Datalogger device."); return; } diff --git a/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs b/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs index c6fd450c4b..a4d0ab1d5f 100644 --- a/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs +++ b/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs @@ -9,7 +9,7 @@ using System.Runtime.InteropServices; [assembly: AssemblyDescription("")] [assembly: AssemblyConfiguration("")] [assembly: AssemblyCompany("Dean Camera")] -[assembly: AssemblyProduct("Temp DataLogger HostApp")] +[assembly: AssemblyProduct("Temp Datalogger HostApp")] [assembly: AssemblyCopyright("Copyright © Dean Camera 2011")] [assembly: AssemblyTrademark("")] [assembly: AssemblyCulture("")] diff --git a/Projects/Webserver/Lib/DataflashManager.h b/Projects/Webserver/Lib/DataflashManager.h index af76f7f629..95a0119487 100644 --- a/Projects/Webserver/Lib/DataflashManager.h +++ b/Projects/Webserver/Lib/DataflashManager.h @@ -51,7 +51,7 @@ #endif /* Defines: */ - /** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */ + /** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */ #define VIRTUAL_MEMORY_BYTES ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS) /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying diff --git a/Projects/Webserver/Lib/uip/uip.c b/Projects/Webserver/Lib/uip/uip.c index 94171adad5..dccefdd1c7 100644 --- a/Projects/Webserver/Lib/uip/uip.c +++ b/Projects/Webserver/Lib/uip/uip.c @@ -53,7 +53,7 @@ * statement. While it would be possible to break the uip_process() * function into many smaller functions, this would increase the code * size because of the overhead of parameter passing and the fact that - * the optimiser would not be as efficient. + * the optimizer would not be as efficient. * * The principle is that we have a small buffer, called the uip_buf, * in which the device driver puts an incoming packet. The TCP/IP @@ -330,7 +330,7 @@ upper_layer_chksum(u8_t proto) upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]) - UIP_IPH_LEN; #endif /* UIP_CONF_IPV6 */ - /* First sum pseudoheader. */ + /* First sum pseudo-header. */ /* IP protocol and length fields. This addition cannot carry. */ sum = upper_layer_len + proto;