diff --git a/LUFA.pnproj b/LUFA.pnproj
index 9cd530b75b..96065e72fa 100644
--- a/LUFA.pnproj
+++ b/LUFA.pnproj
@@ -1 +1 @@
-
\ No newline at end of file
+
\ No newline at end of file
diff --git a/LUFA/Common/Common.h b/LUFA/Common/Common.h
index cf6c283074..fc21850586 100644
--- a/LUFA/Common/Common.h
+++ b/LUFA/Common/Common.h
@@ -92,6 +92,7 @@
typedef uint32_t uint_reg_t;
+ // TODO
#define EEMEM
#define PROGMEM const
#define ISR(Name) void Name (void)
diff --git a/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
index 9271047555..61e47cfbdc 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
@@ -126,35 +126,6 @@
*/
void USB_Device_SendRemoteWakeup(void);
- /* Type Defines: */
- enum USB_Device_States_t
- {
- DEVICE_STATE_Unattached = 0, /**< Internally implemented by the library. This state indicates
- * that the device is not currently connected to a host.
- */
- DEVICE_STATE_Powered = 1, /**< Internally implemented by the library. This state indicates
- * that the device is connected to a host, but enumeration has not
- * yet begun.
- */
- DEVICE_STATE_Default = 2, /**< Internally implemented by the library. This state indicates
- * that the device's USB bus has been reset by the host and it is
- * now waiting for the host to begin the enumeration process.
- */
- DEVICE_STATE_Addressed = 3, /**< Internally implemented by the library. This state indicates
- * that the device has been addressed by the USB Host, but is not
- * yet configured.
- */
- DEVICE_STATE_Configured = 4, /**< May be implemented by the user project. This state indicates
- * that the device has been enumerated by the host and is ready
- * for USB communications to begin.
- */
- DEVICE_STATE_Suspended = 5, /**< May be implemented by the user project. This state indicates
- * that the USB bus has been suspended by the host, and the device
- * should power down to a minimal power level until the bus is
- * resumed.
- */
- };
-
/* Inline Functions: */
/** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host)
* the frame number is incremented by one.
diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
index ea13a6db09..b51f17dd74 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
@@ -174,11 +174,6 @@
*/
#define ENDPOINT_BANK_DOUBLE (1 << EPBK0)
//@}
-
- /** Endpoint address for the default control endpoint, which always resides in address 0. This is
- * defined for convenience to give more readable code when used with the endpoint macros.
- */
- #define ENDPOINT_CONTROLEP 0
#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
/** Default size of the default control endpoint's bank, until altered by the control endpoint bank size
@@ -187,16 +182,6 @@
#define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8
#endif
- /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
- * numerical address in the device.
- */
- #define ENDPOINT_EPNUM_MASK 0x07
-
- /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's
- * direction for comparing with the \c ENDPOINT_DESCRIPTOR_DIR_* masks.
- */
- #define ENDPOINT_EPDIR_MASK 0x80
-
/** Retrives the maximum bank size in bytes of a given endpoint.
*
* \note This macro will only work correctly on endpoint indexes that are compile-time constants
diff --git a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h
index 0c50a39c3e..2bf13cd26c 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h
@@ -97,109 +97,6 @@
#define HOST_DEVICE_SETTLE_DELAY_MS 1000
#endif
- /* Enums: */
- /** Enum for the various states of the USB Host state machine. Only some states are
- * implemented in the LUFA library - other states are left to the user to implement.
- *
- * For information on each possible USB host state, refer to the USB 2.0 specification.
- * Several of the USB host states are broken up further into multiple smaller sub-states,
- * so that they can be internally implemented inside the library in an efficient manner.
- *
- * \see \ref USB_HostState, which stores the current host state machine state.
- */
- enum USB_Host_States_t
- {
- HOST_STATE_WaitForDeviceRemoval = 0, /**< Internally implemented by the library. This state can be
- * used by the library to wait until the attached device is
- * removed by the user - useful for when an error occurs or
- * further communication with the device is not needed. This
- * allows for other code to run while the state machine is
- * effectively disabled.
- */
- HOST_STATE_WaitForDevice = 1, /**< Internally implemented by the library. This state indicates
- * that the stack is waiting for an interval to elapse before
- * continuing with the next step of the device enumeration
- * process.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Unattached = 2, /**< Internally implemented by the library. This state indicates
- * that the host state machine is waiting for a device to be
- * attached so that it can start the enumeration process.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Powered = 3, /**< Internally implemented by the library. This state indicates
- * that a device has been attached, and the library's internals
- * are being configured to begin the enumeration process.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Powered_WaitForDeviceSettle = 4, /**< Internally implemented by the library. This state indicates
- * that the stack is waiting for the initial settling period to
- * elapse before beginning the enumeration process.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Powered_WaitForConnect = 5, /**< Internally implemented by the library. This state indicates
- * that the stack is waiting for a connection event from the USB
- * controller to indicate a valid USB device has been attached to
- * the bus and is ready to be enumerated.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Powered_DoReset = 6, /**< Internally implemented by the library. This state indicates
- * that a valid USB device has been attached, and that it is
- * will now be reset to ensure it is ready for enumeration.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Powered_ConfigPipe = 7, /**< Internally implemented by the library. This state indicates
- * that the attached device is currently powered and reset, and
- * that the control pipe is now being configured by the stack.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Default = 8, /**< Internally implemented by the library. This state indicates
- * that the stack is currently retrieving the control endpoint's
- * size from the device, so that the control pipe can be altered
- * to match.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Default_PostReset = 9, /**< Internally implemented by the library. This state indicates that
- * the control pipe is being reconfigured to match the retrieved
- * control endpoint size from the device, and the device's USB bus
- * address is being set.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Default_PostAddressSet = 10, /**< Internally implemented by the library. This state indicates that
- * the device's address has now been set, and the stack is has now
- * completed the device enumeration process. This state causes the
- * stack to change the current USB device address to that set for
- * the connected device, before progressing to the user-implemented
- * \ref HOST_STATE_Addressed state for further communications.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Addressed = 11, /**< May be implemented by the user project. This state should
- * set the device configuration before progressing to the
- * \ref HOST_STATE_Configured state. Other processing (such as the
- * retrieval and processing of the device descriptor) should also
- * be placed in this state.
- */
- HOST_STATE_Configured = 12, /**< May be implemented by the user project. This state should implement the
- * actual work performed on the attached device and changed to the
- * \ref HOST_STATE_Suspended or \ref HOST_STATE_WaitForDeviceRemoval states as needed.
- */
- HOST_STATE_Suspended = 15, /**< May be implemented by the user project. This state should be maintained
- * while the bus is suspended, and changed to either the \ref HOST_STATE_Configured
- * (after resuming the bus with the USB_Host_ResumeBus() macro) or the
- * \ref HOST_STATE_WaitForDeviceRemoval states as needed.
- */
- };
-
/** Enum for the error codes for the \ref EVENT_USB_Host_HostError() event.
*
* \see \ref Group_Events for more information on this event.
diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
index 4a5596832d..42876d678a 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
@@ -155,22 +155,12 @@
*/
#define PIPE_BANK_DOUBLE (1 << EPBK0)
//@}
-
- /** Pipe address for the default control pipe, which always resides in address 0. This is
- * defined for convenience to give more readable code when used with the pipe macros.
- */
- #define PIPE_CONTROLPIPE 0
/** Default size of the default control pipe's bank, until altered by the Endpoint0Size value
* in the device descriptor of the attached device.
*/
#define PIPE_CONTROLPIPE_DEFAULT_SIZE 64
- /** Pipe number mask, for masking against pipe addresses to retrieve the pipe's numerical address
- * in the device.
- */
- #define PIPE_PIPENUM_MASK 0x07
-
/** Total number of pipes (including the default control pipe at address 0) which may be used in
* the device. Different USB AVR models support different amounts of pipes, this value reflects
* the maximum number of pipes for the currently selected AVR model.
@@ -184,16 +174,6 @@
*/
#define PIPE_MAX_SIZE 256
- /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
- * numerical address in the attached device.
- */
- #define PIPE_EPNUM_MASK 0x0F
-
- /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's
- * direction for comparing with the \c ENDPOINT_DESCRIPTOR_DIR_* masks.
- */
- #define PIPE_EPDIR_MASK 0x80
-
/* Enums: */
/** Enum for the possible error return codes of the \ref Pipe_WaitUntilReady() function.
*
diff --git a/LUFA/Drivers/USB/Core/Device.h b/LUFA/Drivers/USB/Core/Device.h
index d6937a5c0b..fdec1df1cb 100644
--- a/LUFA/Drivers/USB/Core/Device.h
+++ b/LUFA/Drivers/USB/Core/Device.h
@@ -54,12 +54,6 @@
#include "StdDescriptors.h"
#include "USBInterrupt.h"
#include "Endpoint.h"
-
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/Device_AVR8.h"
- #elif (ARCH == ARCH_UC3B)
- #include "UC3B/Device_UC3B.h"
- #endif
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_USB_DRIVER)
@@ -67,6 +61,35 @@
#endif
/* Public Interface - May be used in end-application: */
+ /* Enums: */
+ enum USB_Device_States_t
+ {
+ DEVICE_STATE_Unattached = 0, /**< Internally implemented by the library. This state indicates
+ * that the device is not currently connected to a host.
+ */
+ DEVICE_STATE_Powered = 1, /**< Internally implemented by the library. This state indicates
+ * that the device is connected to a host, but enumeration has not
+ * yet begun.
+ */
+ DEVICE_STATE_Default = 2, /**< Internally implemented by the library. This state indicates
+ * that the device's USB bus has been reset by the host and it is
+ * now waiting for the host to begin the enumeration process.
+ */
+ DEVICE_STATE_Addressed = 3, /**< Internally implemented by the library. This state indicates
+ * that the device has been addressed by the USB Host, but is not
+ * yet configured.
+ */
+ DEVICE_STATE_Configured = 4, /**< May be implemented by the user project. This state indicates
+ * that the device has been enumerated by the host and is ready
+ * for USB communications to begin.
+ */
+ DEVICE_STATE_Suspended = 5, /**< May be implemented by the user project. This state indicates
+ * that the USB bus has been suspended by the host, and the device
+ * should power down to a minimal power level until the bus is
+ * resumed.
+ */
+ };
+
/* Function Prototypes: */
/** Function to retrieve a given descriptor's size and memory location from the given descriptor type value,
* index and language ID. This function MUST be overridden in the user application (added with full, identical
@@ -101,6 +124,13 @@
#endif
) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+ /* Architecture Includes: */
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/Device_AVR8.h"
+ #elif (ARCH == ARCH_UC3B)
+ #include "UC3B/Device_UC3B.h"
+ #endif
+
#endif
/** @} */
diff --git a/LUFA/Drivers/USB/Core/Endpoint.h b/LUFA/Drivers/USB/Core/Endpoint.h
index ddbba2737e..557df2c797 100644
--- a/LUFA/Drivers/USB/Core/Endpoint.h
+++ b/LUFA/Drivers/USB/Core/Endpoint.h
@@ -75,17 +75,35 @@
/* Includes: */
#include "../../../Common/Common.h"
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Macros: */
+ /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
+ * numerical address in the device.
+ */
+ #define ENDPOINT_EPNUM_MASK 0x07
+
+ /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's
+ * direction for comparing with the \c ENDPOINT_DESCRIPTOR_DIR_* masks.
+ */
+ #define ENDPOINT_EPDIR_MASK 0x80
+
+ /** Endpoint address for the default control endpoint, which always resides in address 0. This is
+ * defined for convenience to give more readable code when used with the endpoint macros.
+ */
+ #define ENDPOINT_CONTROLEP 0
+
+ /* Architecture Includes: */
#if (ARCH == ARCH_AVR8)
#include "AVR8/Endpoint_AVR8.h"
#elif (ARCH == ARCH_UC3B)
#include "UC3B/Endpoint_UC3B.h"
#endif
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
#endif
/** @} */
diff --git a/LUFA/Drivers/USB/Core/Host.h b/LUFA/Drivers/USB/Core/Host.h
index 7b5b50145d..4a12f1ac31 100644
--- a/LUFA/Drivers/USB/Core/Host.h
+++ b/LUFA/Drivers/USB/Core/Host.h
@@ -52,17 +52,122 @@
/* Includes: */
#include "../../../Common/Common.h"
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Enums: */
+ /** Enum for the various states of the USB Host state machine. Only some states are
+ * implemented in the LUFA library - other states are left to the user to implement.
+ *
+ * For information on each possible USB host state, refer to the USB 2.0 specification.
+ * Several of the USB host states are broken up further into multiple smaller sub-states,
+ * so that they can be internally implemented inside the library in an efficient manner.
+ *
+ * \see \ref USB_HostState, which stores the current host state machine state.
+ */
+ enum USB_Host_States_t
+ {
+ HOST_STATE_WaitForDeviceRemoval = 0, /**< Internally implemented by the library. This state can be
+ * used by the library to wait until the attached device is
+ * removed by the user - useful for when an error occurs or
+ * further communication with the device is not needed. This
+ * allows for other code to run while the state machine is
+ * effectively disabled.
+ */
+ HOST_STATE_WaitForDevice = 1, /**< Internally implemented by the library. This state indicates
+ * that the stack is waiting for an interval to elapse before
+ * continuing with the next step of the device enumeration
+ * process.
+ *
+ * \note Do not manually change to this state in the user code.
+ */
+ HOST_STATE_Unattached = 2, /**< Internally implemented by the library. This state indicates
+ * that the host state machine is waiting for a device to be
+ * attached so that it can start the enumeration process.
+ *
+ * \note Do not manually change to this state in the user code.
+ */
+ HOST_STATE_Powered = 3, /**< Internally implemented by the library. This state indicates
+ * that a device has been attached, and the library's internals
+ * are being configured to begin the enumeration process.
+ *
+ * \note Do not manually change to this state in the user code.
+ */
+ HOST_STATE_Powered_WaitForDeviceSettle = 4, /**< Internally implemented by the library. This state indicates
+ * that the stack is waiting for the initial settling period to
+ * elapse before beginning the enumeration process.
+ *
+ * \note Do not manually change to this state in the user code.
+ */
+ HOST_STATE_Powered_WaitForConnect = 5, /**< Internally implemented by the library. This state indicates
+ * that the stack is waiting for a connection event from the USB
+ * controller to indicate a valid USB device has been attached to
+ * the bus and is ready to be enumerated.
+ *
+ * \note Do not manually change to this state in the user code.
+ */
+ HOST_STATE_Powered_DoReset = 6, /**< Internally implemented by the library. This state indicates
+ * that a valid USB device has been attached, and that it is
+ * will now be reset to ensure it is ready for enumeration.
+ *
+ * \note Do not manually change to this state in the user code.
+ */
+ HOST_STATE_Powered_ConfigPipe = 7, /**< Internally implemented by the library. This state indicates
+ * that the attached device is currently powered and reset, and
+ * that the control pipe is now being configured by the stack.
+ *
+ * \note Do not manually change to this state in the user code.
+ */
+ HOST_STATE_Default = 8, /**< Internally implemented by the library. This state indicates
+ * that the stack is currently retrieving the control endpoint's
+ * size from the device, so that the control pipe can be altered
+ * to match.
+ *
+ * \note Do not manually change to this state in the user code.
+ */
+ HOST_STATE_Default_PostReset = 9, /**< Internally implemented by the library. This state indicates that
+ * the control pipe is being reconfigured to match the retrieved
+ * control endpoint size from the device, and the device's USB bus
+ * address is being set.
+ *
+ * \note Do not manually change to this state in the user code.
+ */
+ HOST_STATE_Default_PostAddressSet = 10, /**< Internally implemented by the library. This state indicates that
+ * the device's address has now been set, and the stack is has now
+ * completed the device enumeration process. This state causes the
+ * stack to change the current USB device address to that set for
+ * the connected device, before progressing to the user-implemented
+ * \ref HOST_STATE_Addressed state for further communications.
+ *
+ * \note Do not manually change to this state in the user code.
+ */
+ HOST_STATE_Addressed = 11, /**< May be implemented by the user project. This state should
+ * set the device configuration before progressing to the
+ * \ref HOST_STATE_Configured state. Other processing (such as the
+ * retrieval and processing of the device descriptor) should also
+ * be placed in this state.
+ */
+ HOST_STATE_Configured = 12, /**< May be implemented by the user project. This state should implement the
+ * actual work performed on the attached device and changed to the
+ * \ref HOST_STATE_Suspended or \ref HOST_STATE_WaitForDeviceRemoval states as needed.
+ */
+ HOST_STATE_Suspended = 15, /**< May be implemented by the user project. This state should be maintained
+ * while the bus is suspended, and changed to either the \ref HOST_STATE_Configured
+ * (after resuming the bus with the USB_Host_ResumeBus() macro) or the
+ * \ref HOST_STATE_WaitForDeviceRemoval states as needed.
+ */
+ };
+
+ /* Architecture Includes: */
#if (ARCH == ARCH_AVR8)
#include "AVR8/Host_AVR8.h"
#elif (ARCH == ARCH_UC3B)
#include "UC3B/Host_UC3B.h"
#endif
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
#endif
/** @} */
diff --git a/LUFA/Drivers/USB/Core/OTG.h b/LUFA/Drivers/USB/Core/OTG.h
index 45f365dcad..fee7c53406 100644
--- a/LUFA/Drivers/USB/Core/OTG.h
+++ b/LUFA/Drivers/USB/Core/OTG.h
@@ -52,16 +52,17 @@
/* Includes: */
#include "../../../Common/Common.h"
-
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/OTG_AVR8.h"
- #endif
-
+
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_USB_DRIVER)
#error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
#endif
+ /* Architecture Includes: */
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/OTG_AVR8.h"
+ #endif
+
#endif
/** @} */
diff --git a/LUFA/Drivers/USB/Core/Pipe.h b/LUFA/Drivers/USB/Core/Pipe.h
index 8c6e26bb76..ac49ee89e0 100644
--- a/LUFA/Drivers/USB/Core/Pipe.h
+++ b/LUFA/Drivers/USB/Core/Pipe.h
@@ -85,17 +85,40 @@
/* Includes: */
#include "../../../Common/Common.h"
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Macros: */
+ /** Pipe address for the default control pipe, which always resides in address 0. This is
+ * defined for convenience to give more readable code when used with the pipe macros.
+ */
+ #define PIPE_CONTROLPIPE 0
+
+ /** Pipe number mask, for masking against pipe addresses to retrieve the pipe's numerical address
+ * in the device.
+ */
+ #define PIPE_PIPENUM_MASK 0x07
+
+ /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
+ * numerical address in the attached device.
+ */
+ #define PIPE_EPNUM_MASK 0x0F
+
+ /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's
+ * direction for comparing with the \c ENDPOINT_DESCRIPTOR_DIR_* masks.
+ */
+ #define PIPE_EPDIR_MASK 0x80
+
+ /* Architecture Includes: */
#if (ARCH == ARCH_AVR8)
#include "AVR8/Pipe_AVR8.h"
#elif (ARCH == ARCH_UC3B)
#include "UC3B/Pipe_UC3B.h"
#endif
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
#endif
/** @} */
diff --git a/LUFA/Drivers/USB/Core/UC3B/Device_UC3B.h b/LUFA/Drivers/USB/Core/UC3B/Device_UC3B.h
index 73abc107ed..0e7692330d 100644
--- a/LUFA/Drivers/USB/Core/UC3B/Device_UC3B.h
+++ b/LUFA/Drivers/USB/Core/UC3B/Device_UC3B.h
@@ -115,35 +115,6 @@
*/
void USB_Device_SendRemoteWakeup(void);
- /* Type Defines: */
- enum USB_Device_States_t
- {
- DEVICE_STATE_Unattached = 0, /**< Internally implemented by the library. This state indicates
- * that the device is not currently connected to a host.
- */
- DEVICE_STATE_Powered = 1, /**< Internally implemented by the library. This state indicates
- * that the device is connected to a host, but enumeration has not
- * yet begun.
- */
- DEVICE_STATE_Default = 2, /**< Internally implemented by the library. This state indicates
- * that the device's USB bus has been reset by the host and it is
- * now waiting for the host to begin the enumeration process.
- */
- DEVICE_STATE_Addressed = 3, /**< Internally implemented by the library. This state indicates
- * that the device has been addressed by the USB Host, but is not
- * yet configured.
- */
- DEVICE_STATE_Configured = 4, /**< May be implemented by the user project. This state indicates
- * that the device has been enumerated by the host and is ready
- * for USB communications to begin.
- */
- DEVICE_STATE_Suspended = 5, /**< May be implemented by the user project. This state indicates
- * that the USB bus has been suspended by the host, and the device
- * should power down to a minimal power level until the bus is
- * resumed.
- */
- };
-
/* Inline Functions: */
/** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host)
* the frame number is incremented by one.
diff --git a/LUFA/Drivers/USB/Core/UC3B/Endpoint_UC3B.h b/LUFA/Drivers/USB/Core/UC3B/Endpoint_UC3B.h
index 7f743750af..ca7403a80c 100644
--- a/LUFA/Drivers/USB/Core/UC3B/Endpoint_UC3B.h
+++ b/LUFA/Drivers/USB/Core/UC3B/Endpoint_UC3B.h
@@ -120,7 +120,7 @@
/* Inline Functions: */
static inline uint32_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST
- ATTR_ALWAYS_INLINE;
+ ATTR_ALWAYS_INLINE;
static inline uint32_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes)
{
uint8_t MaskVal = 0;
@@ -182,11 +182,6 @@
*/
#define ENDPOINT_BANK_TRIPLE AVR32_USBB_UECFG0_EPBK_TRIPLE
//@}
-
- /** Endpoint address for the default control endpoint, which always resides in address 0. This is
- * defined for convenience to give more readable code when used with the endpoint macros.
- */
- #define ENDPOINT_CONTROLEP 0
#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
/** Default size of the default control endpoint's bank, until altered by the control endpoint bank size
@@ -195,16 +190,6 @@
#define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8
#endif
- /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
- * numerical address in the device.
- */
- #define ENDPOINT_EPNUM_MASK 0x07
-
- /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's
- * direction for comparing with the \c ENDPOINT_DESCRIPTOR_DIR_* masks.
- */
- #define ENDPOINT_EPDIR_MASK 0x80
-
/** Retrives the maximum bank size in bytes of a given endpoint.
*
* \note This macro will only work correctly on endpoint indexes that are compile-time constants
diff --git a/LUFA/Drivers/USB/Core/UC3B/Host_UC3B.h b/LUFA/Drivers/USB/Core/UC3B/Host_UC3B.h
index d4f748f044..0a055ed958 100644
--- a/LUFA/Drivers/USB/Core/UC3B/Host_UC3B.h
+++ b/LUFA/Drivers/USB/Core/UC3B/Host_UC3B.h
@@ -98,108 +98,6 @@
#endif
/* Enums: */
- /** Enum for the various states of the USB Host state machine. Only some states are
- * implemented in the LUFA library - other states are left to the user to implement.
- *
- * For information on each possible USB host state, refer to the USB 2.0 specification.
- * Several of the USB host states are broken up further into multiple smaller sub-states,
- * so that they can be internally implemented inside the library in an efficient manner.
- *
- * \see \ref USB_HostState, which stores the current host state machine state.
- */
- enum USB_Host_States_t
- {
- HOST_STATE_WaitForDeviceRemoval = 0, /**< Internally implemented by the library. This state can be
- * used by the library to wait until the attached device is
- * removed by the user - useful for when an error occurs or
- * further communication with the device is not needed. This
- * allows for other code to run while the state machine is
- * effectively disabled.
- */
- HOST_STATE_WaitForDevice = 1, /**< Internally implemented by the library. This state indicates
- * that the stack is waiting for an interval to elapse before
- * continuing with the next step of the device enumeration
- * process.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Unattached = 2, /**< Internally implemented by the library. This state indicates
- * that the host state machine is waiting for a device to be
- * attached so that it can start the enumeration process.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Powered = 3, /**< Internally implemented by the library. This state indicates
- * that a device has been attached, and the library's internals
- * are being configured to begin the enumeration process.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Powered_WaitForDeviceSettle = 4, /**< Internally implemented by the library. This state indicates
- * that the stack is waiting for the initial settling period to
- * elapse before beginning the enumeration process.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Powered_WaitForConnect = 5, /**< Internally implemented by the library. This state indicates
- * that the stack is waiting for a connection event from the USB
- * controller to indicate a valid USB device has been attached to
- * the bus and is ready to be enumerated.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Powered_DoReset = 6, /**< Internally implemented by the library. This state indicates
- * that a valid USB device has been attached, and that it is
- * will now be reset to ensure it is ready for enumeration.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Powered_ConfigPipe = 7, /**< Internally implemented by the library. This state indicates
- * that the attached device is currently powered and reset, and
- * that the control pipe is now being configured by the stack.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Default = 8, /**< Internally implemented by the library. This state indicates
- * that the stack is currently retrieving the control endpoint's
- * size from the device, so that the control pipe can be altered
- * to match.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Default_PostReset = 9, /**< Internally implemented by the library. This state indicates that
- * the control pipe is being reconfigured to match the retrieved
- * control endpoint size from the device, and the device's USB bus
- * address is being set.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Default_PostAddressSet = 10, /**< Internally implemented by the library. This state indicates that
- * the device's address has now been set, and the stack is has now
- * completed the device enumeration process. This state causes the
- * stack to change the current USB device address to that set for
- * the connected device, before progressing to the user-implemented
- * \ref HOST_STATE_Addressed state for further communications.
- *
- * \note Do not manually change to this state in the user code.
- */
- HOST_STATE_Addressed = 11, /**< May be implemented by the user project. This state should
- * set the device configuration before progressing to the
- * \ref HOST_STATE_Configured state. Other processing (such as the
- * retrieval and processing of the device descriptor) should also
- * be placed in this state.
- */
- HOST_STATE_Configured = 12, /**< May be implemented by the user project. This state should implement the
- * actual work performed on the attached device and changed to the
- * \ref HOST_STATE_Suspended or \ref HOST_STATE_WaitForDeviceRemoval states as needed.
- */
- HOST_STATE_Suspended = 15, /**< May be implemented by the user project. This state should be maintained
- * while the bus is suspended, and changed to either the \ref HOST_STATE_Configured
- * (after resuming the bus with the USB_Host_ResumeBus() macro) or the
- * \ref HOST_STATE_WaitForDeviceRemoval states as needed.
- */
- };
-
/** Enum for the error codes for the \ref EVENT_USB_Host_HostError() event.
*
* \see \ref Group_Events for more information on this event.
diff --git a/LUFA/Drivers/USB/Core/UC3B/Pipe_UC3B.h b/LUFA/Drivers/USB/Core/UC3B/Pipe_UC3B.h
index 5663a76f29..21b2583dea 100644
--- a/LUFA/Drivers/USB/Core/UC3B/Pipe_UC3B.h
+++ b/LUFA/Drivers/USB/Core/UC3B/Pipe_UC3B.h
@@ -162,22 +162,12 @@
*/
#define PIPE_BANK_TRIPLE AVR32_USBB_UPCFG0_PBK_TRIPLE
//@}
-
- /** Pipe address for the default control pipe, which always resides in address 0. This is
- * defined for convenience to give more readable code when used with the pipe macros.
- */
- #define PIPE_CONTROLPIPE 0
/** Default size of the default control pipe's bank, until altered by the Endpoint0Size value
* in the device descriptor of the attached device.
*/
#define PIPE_CONTROLPIPE_DEFAULT_SIZE 64
- /** Pipe number mask, for masking against pipe addresses to retrieve the pipe's numerical address
- * in the device.
- */
- #define PIPE_PIPENUM_MASK 0x07
-
/** Total number of pipes (including the default control pipe at address 0) which may be used in
* the device. Different USB AVR models support different amounts of pipes, this value reflects
* the maximum number of pipes for the currently selected AVR model.
@@ -191,16 +181,6 @@
*/
#define PIPE_MAX_SIZE 256
- /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
- * numerical address in the attached device.
- */
- #define PIPE_EPNUM_MASK 0x0F
-
- /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's
- * direction for comparing with the \c ENDPOINT_DESCRIPTOR_DIR_* masks.
- */
- #define PIPE_EPDIR_MASK 0x80
-
/* Enums: */
/** Enum for the possible error return codes of the \ref Pipe_WaitUntilReady() function.
*
diff --git a/LUFA/Drivers/USB/Core/USBController.h b/LUFA/Drivers/USB/Core/USBController.h
index e17a2d73de..719b97b627 100644
--- a/LUFA/Drivers/USB/Core/USBController.h
+++ b/LUFA/Drivers/USB/Core/USBController.h
@@ -51,17 +51,18 @@
/* Includes: */
#include "../../../Common/Common.h"
+ /* Preprocessor Checks and Defines: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+ /* Architecture Includes: */
#if (ARCH == ARCH_AVR8)
#include "AVR8/USBController_AVR8.h"
#elif (ARCH == ARCH_UC3B)
#include "UC3B/USBController_UC3B.h"
#endif
- /* Preprocessor Checks and Defines: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
#endif
/** @} */
diff --git a/LUFA/Drivers/USB/Core/USBInterrupt.h b/LUFA/Drivers/USB/Core/USBInterrupt.h
index 252ad5061d..b850f3fe77 100644
--- a/LUFA/Drivers/USB/Core/USBInterrupt.h
+++ b/LUFA/Drivers/USB/Core/USBInterrupt.h
@@ -43,17 +43,18 @@
/* Includes: */
#include "../../../Common/Common.h"
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+ /* Architecture Includes: */
#if (ARCH == ARCH_AVR8)
#include "AVR8/USBInterrupt_AVR8.h"
#elif (ARCH == ARCH_UC3B)
#include "UC3B/USBInterrupt_UC3B.h"
#endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
#endif