adds QMK board with definable LEDs and matrix scan

pull/1469/head
Jack Humbert 8 years ago
parent 2cde257fe1
commit 385d403003

@ -136,8 +136,8 @@ void Application_Jump_Check(void)
if (boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS) & FUSE_BOOTRST)
{
/* If the reset source was not an external reset or the key is correct, clear it and jump to the application */
if (!(MCUSR & (1 << EXTRF)) || (MagicBootKey == MAGIC_BOOT_KEY))
JumpToApplication = true;
//if (!(MCUSR & (1 << EXTRF)) || (MagicBootKey == MAGIC_BOOT_KEY))
// JumpToApplication = true;
/* Clear reset source */
MCUSR &= ~(1 << EXTRF);
@ -146,8 +146,8 @@ void Application_Jump_Check(void)
{
/* If the reset source was the bootloader and the key is correct, clear it and jump to the application;
* this can happen in the HWBE fuse is set, and the HBE pin is low during the watchdog reset */
if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY))
JumpToApplication = true;
//if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY))
// JumpToApplication = true;
/* Clear reset source */
MCUSR &= ~(1 << WDRF);
@ -182,14 +182,32 @@ int main(void)
SetupHardware();
/* Turn on first LED on the board to indicate that the bootloader has started */
LEDs_SetAllLEDs(LEDS_LED1);
LEDs_SetAllLEDs(LEDS_LED1 | LEDS_LED2);
/* Enable global interrupts so that the USB stack can function */
GlobalInterruptEnable();
#if (BOARD == BOARD_QMK)
uint16_t keypress = 0;
#endif
/* Run the USB management task while the bootloader is supposed to be running */
while (RunBootloader || WaitForExit)
while (RunBootloader || WaitForExit) {
USB_USBTask();
#if (BOARD == BOARD_QMK)
bool pressed = (PIN(QMK_ESC_ROW) & NUM(QMK_ESC_ROW));
if ((DFU_State == dfuIDLE) && (keypress > 5000) && pressed) {
break;
}
if (pressed) {
keypress++;
} else {
keypress = 0;
}
#endif
}
/* Reset configured hardware back to their original states for the user application */
ResetHardware();
@ -212,6 +230,15 @@ static void SetupHardware(void)
MCUCR = (1 << IVCE);
MCUCR = (1 << IVSEL);
#if (BOARD == BOARD_QMK)
// column setup
DDR(QMK_ESC_COL) |= NUM(QMK_ESC_COL);
PORT(QMK_ESC_COL) |= NUM(QMK_ESC_COL);
// row setup
DDR(QMK_ESC_ROW) |= NUM(QMK_ESC_ROW);
#endif
/* Initialize the USB and other board hardware drivers */
USB_Init();
LEDs_Init();
@ -219,7 +246,8 @@ static void SetupHardware(void)
/* Bootloader active LED toggle timer initialization */
TIMSK1 = (1 << TOIE1);
TCCR1B = ((1 << CS11) | (1 << CS10));
}
}
/** Resets all configured hardware required for the bootloader back to their original states. */
static void ResetHardware(void)
@ -235,6 +263,10 @@ static void ResetHardware(void)
/* Relocate the interrupt vector table back to the application section */
MCUCR = (1 << IVCE);
MCUCR = 0;
#if (BOARD == BOARD_QMK)
DDR(QMK_ESC_COL) = PORT(QMK_ESC_COL) = DDR(QMK_ESC_ROW) = PORT(QMK_ESC_ROW) = 0;
#endif
}
/** ISR to periodically toggle the LEDs on the board to indicate that the bootloader is active. */

@ -125,13 +125,13 @@ const USB_Descriptor_String_t LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGU
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
const USB_Descriptor_String_t ManufacturerString = USB_STRING_DESCRIPTOR(L"QMK");
/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
const USB_Descriptor_String_t ProductString = USB_STRING_DESCRIPTOR(L"LUFA DFU");
const USB_Descriptor_String_t ProductString = USB_STRING_DESCRIPTOR(L"KB");
/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
* documentation) by the application code so that the address and size of a requested descriptor can be given

@ -11,10 +11,10 @@
# Run "make help" for target help.
MCU = at90usb1287
MCU = atmega32u4
ARCH = AVR8
BOARD = USBKEY
F_CPU = 8000000
BOARD = QMK
F_CPU = 16000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = BootloaderDFU
@ -26,8 +26,8 @@ LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAG
# Flash size and bootloader section sizes of the target, in KB. These must
# match the target's total FLASH size and the bootloader size set in the
# device's fuses.
FLASH_SIZE_KB = 128
BOOT_SECTION_SIZE_KB = 8
FLASH_SIZE_KB = 32
BOOT_SECTION_SIZE_KB = 4
# Bootloader address calculation formulas
# Do not modify these macros, but rather modify the dependent values above.

@ -246,6 +246,9 @@
/** Selects the Atmel Xplained-MINI specific board drivers, including the driver for the board LEDs. */
#define BOARD_XPLAINED_MINI 60
/** Selects the QMK specific board drivres, including the driver for the board LEDs. */
#define BOARD_QMK 61
#if !defined(__DOXYGEN__)
#define BOARD_ BOARD_NONE

@ -0,0 +1,65 @@
/*
Copyright 2017 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/** \file
* \brief General driver header for QMK-powered keyboards.
* \copydetails Group_BoardInfo_QMK
*
* \note This file should not be included directly. It is automatically included as needed by the Board driver
* dispatch header located in LUFA/Drivers/Board/Board.h.
*/
/** \ingroup Group_BoardInfo
* \defgroup Group_BoardInfo_QMK QMK
* \brief General driver header for QMK-powered keyboards.
*
* General driver header for QMK-powered keyboards (http://qmk.fm).
*
* @{
*/
#ifndef __BOARD_QMK_H__
#define __BOARD_QMK_H__
/* Includes: */
#include "../../../../Common/Common.h"
#include "../../LEDs.h"
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_BOARD_H)
#error Do not include this file directly. Include LUFA/Drivers/Board/Board.h instead.
#endif
/* Public Interface - May be used in end-application: */
/* Macros: */
/** Indicates the board has hardware LEDs mounted. */
#define BOARD_HAS_LEDS
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif
/** @} */

@ -0,0 +1,194 @@
/*
Copyright 2017 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/** \file
* \brief General driver header for QMK-powered keyboards.
* \copydetails Group_LEDs_QMK
*
* \note This file should not be included directly. It is automatically included as needed by the LEDs driver
* dispatch header located in LUFA/Drivers/Board/LEDs.h.
*/
/** \ingroup Group_LEDs
* \defgroup Group_LEDs_QMK QMK
* \brief General driver header for QMK-powered keyboards.
*
* General driver header for QMK-powered keyboards (http://qmk.fm).
*
* <b>QMK</b>:
* <table>
* <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
* <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORT(QMK_LED).6</td></tr>
* </table>
*
* @{
*/
#ifndef __LEDS_QMK_H__
#define __LEDS_QMK_H__
/* Includes: */
#include "../../../../Common/Common.h"
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
extern "C" {
#endif
/* Preprocessor Checks: */
#if !defined(__INCLUDE_FROM_LEDS_H)
#error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
#endif
#define B0 0x30
#define B1 0x31
#define B2 0x32
#define B3 0x33
#define B4 0x34
#define B5 0x35
#define B6 0x36
#define B7 0x37
#define C0 0x60
#define C1 0x61
#define C2 0x62
#define C3 0x63
#define C4 0x64
#define C5 0x65
#define C6 0x66
#define C7 0x67
#define D0 0x90
#define D1 0x91
#define D2 0x92
#define D3 0x93
#define D4 0x94
#define D5 0x95
#define D6 0x96
#define D7 0x97
#define E0 0xC0
#define E1 0xC1
#define E2 0xC2
#define E3 0xC3
#define E4 0xC4
#define E5 0xC5
#define E6 0xC6
#define E7 0xC7
#define F0 0xF0
#define F1 0xF1
#define F2 0xF2
#define F3 0xF3
#define F4 0xF4
#define F5 0xF5
#define F6 0xF6
#define F7 0xF7
#define A0 0x00
#define A1 0x01
#define A2 0x02
#define A3 0x03
#define A4 0x04
#define A5 0x05
#define A6 0x06
#define A7 0x07
#define QMK_ESC_COL F1
#define QMK_ESC_ROW D5
#define QMK_LED E6
#define QMK_SPEAKER C6
#define DDR(pin) _SFR_IO8(((pin) >> 4) + 1)
#define PORT(pin) _SFR_IO8(((pin) >> 4) + 2)
#define PIN(pin) _SFR_IO8((pin) >> 4)
#define NUM(pin) _BV((pin) & 0xF)
/* Public Interface - May be used in end-application: */
/* Macros: */
/** LED mask for the first LED on the board. */
#define LEDS_LED1 NUM(QMK_LED)
#define LEDS_LED2 NUM(QMK_SPEAKER)
/** LED mask for all the LEDs on the board. */
#define LEDS_ALL_LEDS LEDS_LED1 | LEDS_LED2
/** LED mask for none of the board LEDs. */
#define LEDS_NO_LEDS 0
/* Inline Functions: */
#if !defined(__DOXYGEN__)
static inline void LEDs_Init(void)
{
DDR(QMK_LED) |= LEDS_LED1;
PORT(QMK_LED) |= LEDS_LED1;
DDR(QMK_SPEAKER) |= LEDS_LED2;
PORT(QMK_SPEAKER) |= LEDS_LED2;
}
static inline void LEDs_Disable(void)
{
DDR(QMK_LED) &= ~LEDS_LED1;
PORT(QMK_LED) &= ~LEDS_LED2;
DDR(QMK_SPEAKER) &= ~LEDS_LED1;
PORT(QMK_SPEAKER) &= ~LEDS_LED2;
}
static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
{
PORT(QMK_LED) &= (LEDS_LED1 & ~LEDMask);
PORT(QMK_SPEAKER) &= (LEDS_LED2 & ~LEDMask);
}
static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
{
PORT(QMK_LED) |= (LEDS_LED1 & LEDMask);
PORT(QMK_SPEAKER) |= (LEDS_LED2 & LEDMask);
}
static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
{
PORT(QMK_LED) = ((PORT(QMK_LED) | LEDS_LED1) & ~LEDMask);
PORT(QMK_SPEAKER) = ((PORT(QMK_SPEAKER) | LEDS_LED2) & ~LEDMask);
}
static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
const uint8_t ActiveMask)
{
PORT(QMK_LED) = ((PORT(QMK_LED) | (LEDS_LED1 & LEDMask)) & ~ActiveMask);
PORT(QMK_SPEAKER) = ((PORT(QMK_SPEAKER) | (LEDS_LED1 & LEDMask)) & ~ActiveMask);
}
static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
{
PIN(QMK_LED) = (LEDS_LED1 & LEDMask);
PIN(QMK_SPEAKER) = (LEDS_LED2 & LEDMask);
}
static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
static inline uint8_t LEDs_GetLEDs(void)
{
return (~PORT(QMK_LED) & LEDS_LED1) | (~(PORT(QMK_SPEAKER) & LEDS_LED2));
}
#endif
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
}
#endif
#endif
/** @} */

@ -81,6 +81,8 @@
#include "AVR8/EVK527/Board.h"
#elif ((BOARD == BOARD_TEENSY) || (BOARD == BOARD_TEENSY2))
#include "AVR8/TEENSY/Board.h"
#elif ((BOARD == BOARD_QMK))
#include "AVR8/QMK/Board.h"
#elif (BOARD == BOARD_USBTINYMKII)
#include "AVR8/USBTINYMKII/Board.h"
#elif (BOARD == BOARD_BENITO)

@ -134,6 +134,8 @@
#include "AVR8/EVK527/LEDs.h"
#elif ((BOARD == BOARD_TEENSY) || (BOARD == BOARD_TEENSY2))
#include "AVR8/TEENSY/LEDs.h"
#elif ((BOARD == BOARD_QMK))
#include "AVR8/QMK/LEDs.h"
#elif (BOARD == BOARD_USBTINYMKII)
#include "AVR8/USBTINYMKII/LEDs.h"
#elif (BOARD == BOARD_BENITO)

Loading…
Cancel
Save