From 45620fd289ad81f6bd34cf6a95e86f86d7577b9a Mon Sep 17 00:00:00 2001 From: zvecr Date: Wed, 10 Apr 2019 00:39:06 +0100 Subject: [PATCH] Remove ps2avrGB since its a hangover from the keyboards/winkeyless refactor (#5592) --- keyboards/ps2avrGB/README.md | 78 ---- keyboards/ps2avrGB/bmini.h | 60 --- keyboards/ps2avrGB/config.h | 38 -- keyboards/ps2avrGB/i2c.c | 106 ------ keyboards/ps2avrGB/i2c.h | 27 -- keyboards/ps2avrGB/keymaps/default/keymap.c | 37 -- keyboards/ps2avrGB/matrix.c | 112 ------ keyboards/ps2avrGB/ps2avrGB.c | 78 ---- keyboards/ps2avrGB/ps2avrGB.h | 24 -- keyboards/ps2avrGB/rules.mk | 50 --- keyboards/ps2avrGB/usbconfig.h | 396 -------------------- 11 files changed, 1006 deletions(-) delete mode 100644 keyboards/ps2avrGB/README.md delete mode 100644 keyboards/ps2avrGB/bmini.h delete mode 100644 keyboards/ps2avrGB/config.h delete mode 100644 keyboards/ps2avrGB/i2c.c delete mode 100644 keyboards/ps2avrGB/i2c.h delete mode 100644 keyboards/ps2avrGB/keymaps/default/keymap.c delete mode 100644 keyboards/ps2avrGB/matrix.c delete mode 100644 keyboards/ps2avrGB/ps2avrGB.c delete mode 100644 keyboards/ps2avrGB/ps2avrGB.h delete mode 100644 keyboards/ps2avrGB/rules.mk delete mode 100644 keyboards/ps2avrGB/usbconfig.h diff --git a/keyboards/ps2avrGB/README.md b/keyboards/ps2avrGB/README.md deleted file mode 100644 index 8a558b1586..0000000000 --- a/keyboards/ps2avrGB/README.md +++ /dev/null @@ -1,78 +0,0 @@ -ps2avrGB keyboard firmware -========================== - -This is a port of the QMK firmware for boards that are based on the -ps2avrGB firmware, like the [ps2avrGB -keyboard](https://www.keyclack.com/product/gb-ps2avrgb/) or the ones sold -by [Winkeyless](http://winkeyless.kr/product/ps2avrgb-parts/). - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. - -This is an example based on the b.mini keyboard for making other keyboards -compatible with QMK; fully supported boards have their own directory. - -## Supported Boards - -- [b.fake](https://github.com/qmk/qmk_firmware/tree/master/keyboards/bfake) -- [b.mini](https://github.com/qmk/qmk_firmware/tree/master/keyboards/bmini) -- [b.face](https://github.com/qmk/qmk_firmware/tree/master/keyboards/bface) -- [pearl](https://github.com/qmk/qmk_firmware/tree/master/keyboards/pearl) - -## Installing - -First, install the requirements. These commands are for OSX, but all you -need is the AVR toolchain and `bootloadHID` for flashing: - -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -In order to use the `./util/atmega32a_program.py` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -Then, with the keyboard plugged in, simply run this command from the -`qmk_firmware` directory: - -``` -$ make ps2avrGB:program -``` - -If you prefer, you can just build it and flash the firmware directly with -`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it -in the bootloader: - -``` -$ make ps2avrGB -$ bootloadHID -r ps2avrGB_default.hex -``` - -## Setting the board to bootloader mode - -If you're lucky, the programming script does this automagically for you. If -however this doesn't work for you, you need to enter the bootloader mode manually -by plugging the keyboard in while holding the bootloader key. If you did this -correctly the LEDs will blink and you'll be able to flash your firmware. - -The bootloader key is the top left key of your matrix. For a standard board -from winkeyless.kr this is `L_Ctrl`, but for some custom boards running ps2avrGB -this might be different. For the Pearl it's `Esc`, for a b.fake it is `q`. If -you're unsure you should be able to see the key in the bootmapper client. - - -## Troubleshooting - -From my experience, it's really hard to brick these boards. But these -tricks have been useful when it got stuck in a weird scenario. - -1. Try plugging the board in while holding the bootloader key. This will force - it to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. diff --git a/keyboards/ps2avrGB/bmini.h b/keyboards/ps2avrGB/bmini.h deleted file mode 100644 index 65ffbe9479..0000000000 --- a/keyboards/ps2avrGB/bmini.h +++ /dev/null @@ -1,60 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef BMINI_H -#define BMINI_H - -#include "quantum.h" - -#define KEYMAP( \ - K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \ - K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \ - K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \ - K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \ - K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \ - K00, K10, K20, K56, K57, KB0, KC0, K66, K76, K96 \ -){ \ - { K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0, KD0, KE0 }, \ - { K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KD1, KE1 }, \ - { K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, KC_NO, KC_NO, KA2, KB2, KC_NO, KD2, KE2 }, \ - { K03, K13, K23, K33, K43, K53, KC_NO, KC_NO, KC_NO, KC_NO, KA3, KB3, KC3, KD3, KC_NO }, \ - { K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \ - { K05, KC_NO, K25, K35, K45, K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5, KD5, KE5 }, \ - { K06, K16, K26, K36, K46, K56, K66, K76, K86, K96, KA6, KB6, KC6, KD6, KE6 }, \ - { K07, K17, K27, K37, K47, K57, K67, K77, KC_NO, KC_NO, KA7, KB7, KC7, KD7, KE7 } \ -} - -#define KC_KEYMAP( \ - K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \ - K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \ - K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \ - K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \ - K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \ - K00, K10, K20, K56, K57, KB0, KC0, K66, K76, K96 \ -) \ -{ \ - { KC_##K00, KC_##K10, KC_##K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KB0, KC_##KC0, KC_##KD0, KC_##KE0 }, \ - { KC_##K01, KC_##K11, KC_##K21, KC_##K31, KC_##K41, KC_##K51, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA1, KC_##KB1, KC_NO, KC_##KD1, KC_##KE1 }, \ - { KC_##K02, KC_##K12, KC_##K22, KC_##K32, KC_##K42, KC_##K52, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA2, KC_##KB2, KC_NO, KC_##KD2, KC_##KE2 }, \ - { KC_##K03, KC_##K13, KC_##K23, KC_##K33, KC_##K43, KC_##K53, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA3, KC_##KB3, KC_##KC3, KC_##KD3, KC_NO }, \ - { KC_##K04, KC_##K14, KC_##K24, KC_##K34, KC_##K44, KC_##K54, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KA4, KC_##KB4, KC_##KC4, KC_NO, KC_##KE4 }, \ - { KC_##K05, KC_NO, KC_##K25, KC_##K35, KC_##K45, KC_##K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KB5, KC_##KC5, KC_##KD5, KC_##KE5 }, \ - { KC_##K06, KC_##K16, KC_##K26, KC_##K36, KC_##K46, KC_##K56, KC_##K66, KC_##K76, KC_##K86, KC_##K96, KC_##KA6, KC_##KB6, KC_##KC6, KC_##KD6, KC_##KE6 }, \ - { KC_##K07, KC_##K17, KC_##K27, KC_##K37, KC_##K47, KC_##K57, KC_##K67, KC_##K77, KC_NO, KC_NO, KC_##KA7, KC_##KB7, KC_##KC7, KC_##KD7, KC_##KE7 } \ -} - -#endif diff --git a/keyboards/ps2avrGB/config.h b/keyboards/ps2avrGB/config.h deleted file mode 100644 index c0de5a2116..0000000000 --- a/keyboards/ps2avrGB/config.h +++ /dev/null @@ -1,38 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. -#define MANUFACTURER winkeyless.kr -#define PRODUCT ps2avrGB - -/* matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 15 - -#define RGBLED_NUM 16 -#define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 - -#endif diff --git a/keyboards/ps2avrGB/i2c.c b/keyboards/ps2avrGB/i2c.c deleted file mode 100644 index a4f9521352..0000000000 --- a/keyboards/ps2avrGB/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/ps2avrGB/keymaps/default/keymap.c b/keyboards/ps2avrGB/keymaps/default/keymap.c deleted file mode 100644 index 6b3403ed7c..0000000000 --- a/keyboards/ps2avrGB/keymaps/default/keymap.c +++ /dev/null @@ -1,37 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = KEYMAP( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_HOME,KC_END, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_INS, - MO(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, KC_PGUP, - KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL,KC_LALT,KC_LGUI, KC_SPC, KC_RGUI,KC_RALT,KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT - ), - [1] = KEYMAP( - KC_TRNS,RGB_TOG,RGB_MOD,RGB_HUI,RGB_SAI,RGB_VAI,RGB_HUD,RGB_SAD,RGB_VAD,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_END, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_DEL, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_INS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_RGHT - ), -}; diff --git a/keyboards/ps2avrGB/matrix.c b/keyboards/ps2avrGB/matrix.c deleted file mode 100644 index 245813dfd2..0000000000 --- a/keyboards/ps2avrGB/matrix.c +++ /dev/null @@ -1,112 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_set_row_status(uint8_t row); -uint8_t bit_reverse(uint8_t x); - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1< 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_quantum(); - - return 1; -} - -// declarations -void matrix_set_row_status(uint8_t row) { - DDRB = (1 << row); - PORTB = ~(1 << row); -} - -uint8_t bit_reverse(uint8_t x) { - x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/ps2avrGB/ps2avrGB.c b/keyboards/ps2avrGB/ps2avrGB.c deleted file mode 100644 index 45ba37bffe..0000000000 --- a/keyboards/ps2avrGB/ps2avrGB.c +++ /dev/null @@ -1,78 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "ps2avrGB.h" -#include "rgblight.h" - -#include - -#include "action_layer.h" -#include "i2c.h" -#include "quantum.h" - -// for keyboard subdirectory level init functions -// @Override -void matrix_init_kb(void) { - // call user level keymaps, if any - matrix_init_user(); -} - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -// custom RGB driver -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i=0; i - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef KEYMAP_COMMON_H -#define KEYMAP_COMMON_H - -#include "quantum.h" -#include "bmini.h" - -#endif diff --git a/keyboards/ps2avrGB/rules.mk b/keyboards/ps2avrGB/rules.mk deleted file mode 100644 index 95d287f7f4..0000000000 --- a/keyboards/ps2avrGB/rules.mk +++ /dev/null @@ -1,50 +0,0 @@ -# Copyright 2017 Luiz Ribeiro -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -# MCU name -MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 - -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = atmel-dfu - -# build options -BOOTMAGIC_ENABLE = full -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes -COMMAND_ENABLE = yes -BACKLIGHT_ENABLE = no -RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes - -OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/ps2avrGB/usbconfig.h b/keyboards/ps2avrGB/usbconfig.h deleted file mode 100644 index d2d848fcdc..0000000000 --- a/keyboards/ps2avrGB/usbconfig.h +++ /dev/null @@ -1,396 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -#include "config.h" - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 1 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' -#define USB_CFG_VENDOR_NAME_LEN 13 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' -#define USB_CFG_DEVICE_NAME_LEN 8 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -#define usbMsgPtr_t unsigned short -/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to - * a scalar type here because gcc generates slightly shorter code for scalar - * arithmetics than for pointer arithmetics. Remove this define for backward - * type compatibility or define it to an 8 bit type if you use data in RAM only - * and all RAM is below 256 bytes (tiny memory model in IAR CC). - */ - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -/* Set INT1 for D- falling edge to count SOF */ -/* #define USB_INTR_CFG EICRA */ -#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE EIMSK */ -#define USB_INTR_ENABLE_BIT INT1 -/* #define USB_INTR_PENDING EIFR */ -#define USB_INTR_PENDING_BIT INTF1 -#define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */