diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt
index 538214e900..aefe344ead 100644
--- a/Bootloaders/DFU/BootloaderDFU.txt
+++ b/Bootloaders/DFU/BootloaderDFU.txt
@@ -38,7 +38,8 @@
*
*
* Supported USB Speeds: |
- * Full Speed Mode |
+ * Low Speed Mode \n
+ * Full Speed Mode |
*
*
*
diff --git a/Bootloaders/HID/BootloaderHID.h b/Bootloaders/HID/BootloaderHID.h
index a28163380d..e83aad33cc 100644
--- a/Bootloaders/HID/BootloaderHID.h
+++ b/Bootloaders/HID/BootloaderHID.h
@@ -30,11 +30,11 @@
/** \file
*
- * Header file for TeensyHID.c.
+ * Header file for BootloaderHID.c.
*/
-#ifndef _TEENSYHID_H_
-#define _TEENSYHID_H_
+#ifndef _BOOTLOADERHID_H_
+#define _BOOTLOADERHID_H_
/* Includes: */
#include
diff --git a/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h
index 2d98ef4d61..eb1f928ff6 100644
--- a/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h
@@ -336,8 +336,8 @@
/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ * in both failure and success states; the user is responsible for manually clearing the status OUT packet
+ * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
@@ -358,8 +358,8 @@
/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ * in both failure and success states; the user is responsible for manually clearing the status OUT packet
+ * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
@@ -381,7 +381,7 @@
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
* automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
@@ -403,7 +403,7 @@
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
* automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
diff --git a/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h b/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h
index 3eccb7f15a..551cf4b183 100644
--- a/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h
+++ b/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h
@@ -336,8 +336,8 @@
/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ * in both failure and success states; the user is responsible for manually clearing the status OUT packet
+ * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
@@ -358,8 +358,8 @@
/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ * in both failure and success states; the user is responsible for manually clearing the status OUT packet
+ * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
@@ -381,7 +381,7 @@
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
* automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
@@ -403,7 +403,7 @@
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
* automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
diff --git a/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h
index 4367528802..f2fe28991b 100644
--- a/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h
+++ b/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h
@@ -336,8 +336,8 @@
/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ * in both failure and success states; the user is responsible for manually clearing the status OUT packet
+ * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
@@ -358,8 +358,8 @@
/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ * in both failure and success states; the user is responsible for manually clearing the status OUT packet
+ * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
@@ -381,7 +381,7 @@
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
* automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
@@ -403,7 +403,7 @@
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
* automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
*
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.