try out b6 and b7 audio

b6_b7_audio
Jack Humbert 7 years ago
parent 6b2a3492b7
commit 5cc7df8750

@ -1,90 +1,90 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3060
#define DEVICE_VER 0x0001
#define MANUFACTURER xyxjj
#define PRODUCT DeltaSplit75
#define DESCRIPTION 75% split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 14
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 }
#define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1}
#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 12 // Number of LEDs
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3060
#define DEVICE_VER 0x0001
#define MANUFACTURER xyxjj
#define PRODUCT DeltaSplit75
#define DESCRIPTION 75% split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 14
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 }
#define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1}
#define CATERINA_BOOTLOADER
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_TIMER
#define RGBLED_NUM 12 // Number of LEDs
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

@ -44,6 +44,16 @@
#define DISABLE_AUDIO_COUNTER_1_ISR TIMSK1 &= ~_BV(OCIE1A)
#endif
#ifdef B6_AUDIO
#define ENABLE_AUDIO_COUNTER_1_ISR TIMSK1 |= _BV(OCIE1B)
#define DISABLE_AUDIO_COUNTER_1_ISR TIMSK1 &= ~_BV(OCIE1B)
#endif
#ifdef B7_AUDIO
#define ENABLE_AUDIO_COUNTER_1_ISR TIMSK1 |= _BV(OCIE1C)
#define DISABLE_AUDIO_COUNTER_1_ISR TIMSK1 &= ~_BV(OCIE1C)
#endif
// TCCR3A: Timer/Counter #3 Control Register
// Compare Output Mode (COM3An) = 0b00 = Normal port operation, OC3A disconnected from PC6
@ -57,6 +67,16 @@
#define DISABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A &= ~(_BV(COM1A1) | _BV(COM1A0));
#endif
#ifdef B6_AUDIO
#define ENABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A |= _BV(COM1B1);
#define DISABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A &= ~(_BV(COM1B1) | _BV(COM1B0));
#endif
#ifdef B7_AUDIO
#define ENABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A |= _BV(COM1C1);
#define DISABLE_AUDIO_COUNTER_1_OUTPUT TCCR1A &= ~(_BV(COM1C1) | _BV(COM1C0));
#endif
// Fast PWM Mode Controls
#ifdef C6_AUDIO
@ -69,6 +89,16 @@
#define TIMER_1_DUTY_CYCLE OCR1A
#endif
#ifdef B6_AUDIO
#define TIMER_1_PERIOD ICR1
#define TIMER_1_DUTY_CYCLE OCR1B
#endif
#ifdef B7_AUDIO
#define TIMER_1_PERIOD ICR1
#define TIMER_1_DUTY_CYCLE OCR1C
#endif
// -----------------------------------------------------------------------------
@ -153,11 +183,25 @@ void audio_init()
PORTB &= ~_BV(PORTB5);
#endif
#ifdef B6_AUDIO
DDRB |= _BV(PORTB6);
#else
DDRB |= _BV(PORTB6);
PORTB &= ~_BV(PORTB6);
#endif
#ifdef B7_AUDIO
DDRB |= _BV(PORTB7);
#else
DDRB |= _BV(PORTB7);
PORTB &= ~_BV(PORTB7);
#endif
#ifdef C6_AUDIO
DISABLE_AUDIO_COUNTER_3_ISR;
#endif
#ifdef B5_AUDIO
#if defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)
DISABLE_AUDIO_COUNTER_1_ISR;
#endif
@ -171,7 +215,7 @@ void audio_init()
TCCR3B = (1 << WGM33) | (1 << WGM32) | (0 << CS32) | (1 << CS31) | (0 << CS30);
#endif
#ifdef B5_AUDIO
#if defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)
TCCR1A = (0 << COM1A1) | (0 << COM1A0) | (1 << WGM11) | (0 << WGM10);
TCCR1B = (1 << WGM13) | (1 << WGM12) | (0 << CS12) | (1 << CS11) | (0 << CS10);
#endif
@ -199,7 +243,7 @@ void stop_all_notes()
DISABLE_AUDIO_COUNTER_3_OUTPUT;
#endif
#ifdef B5_AUDIO
#if defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)
DISABLE_AUDIO_COUNTER_1_ISR;
DISABLE_AUDIO_COUNTER_1_OUTPUT;
#endif
@ -249,7 +293,7 @@ void stop_note(float freq)
DISABLE_AUDIO_COUNTER_3_ISR;
DISABLE_AUDIO_COUNTER_3_OUTPUT;
#endif
#ifdef B5_AUDIO
#if defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)
DISABLE_AUDIO_COUNTER_1_ISR;
DISABLE_AUDIO_COUNTER_1_OUTPUT;
#endif
@ -289,7 +333,7 @@ ISR(TIMER3_COMPA_vect)
if (playing_note) {
if (voices > 0) {
#ifdef B5_AUDIO
#if defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)
float freq_alt = 0;
if (voices > 1) {
if (polyphony_rate == 0) {
@ -463,10 +507,10 @@ ISR(TIMER3_COMPA_vect)
}
#endif
#ifdef B5_AUDIO
#if defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)
ISR(TIMER1_COMPA_vect)
{
#if defined(B5_AUDIO) && !defined(C6_AUDIO)
#if (defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)) && !defined(C6_AUDIO)
float freq = 0;
if (playing_note) {
@ -616,7 +660,7 @@ void play_note(float freq, int vol) {
#ifdef C6_AUDIO
DISABLE_AUDIO_COUNTER_3_ISR;
#endif
#ifdef B5_AUDIO
#if defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)
DISABLE_AUDIO_COUNTER_1_ISR;
#endif
@ -638,7 +682,7 @@ void play_note(float freq, int vol) {
ENABLE_AUDIO_COUNTER_3_ISR;
ENABLE_AUDIO_COUNTER_3_OUTPUT;
#endif
#ifdef B5_AUDIO
#if defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)
#ifdef C6_AUDIO
if (voices > 1) {
ENABLE_AUDIO_COUNTER_1_ISR;
@ -665,7 +709,7 @@ void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat)
#ifdef C6_AUDIO
DISABLE_AUDIO_COUNTER_3_ISR;
#endif
#ifdef B5_AUDIO
#if defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)
DISABLE_AUDIO_COUNTER_1_ISR;
#endif
@ -691,7 +735,7 @@ void play_notes(float (*np)[][2], uint16_t n_count, bool n_repeat)
ENABLE_AUDIO_COUNTER_3_ISR;
ENABLE_AUDIO_COUNTER_3_OUTPUT;
#endif
#ifdef B5_AUDIO
#if defined(B5_AUDIO) || defined(B6_AUDIO) || defined(B7_AUDIO)
#ifndef C6_AUDIO
ENABLE_AUDIO_COUNTER_1_ISR;
ENABLE_AUDIO_COUNTER_1_OUTPUT;

Loading…
Cancel
Save