diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c
index 0728e2431f..413e5777fc 100644
--- a/quantum/rgb_matrix.c
+++ b/quantum/rgb_matrix.c
@@ -142,11 +142,28 @@ void rgb_matrix_update_pwm_buffers(void) {
}
void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) {
+#ifdef RGB_MATRIX_EXTRA_TOG
+ const bool is_key = g_rgb_leds[index].matrix_co.raw != 0xff;
+ if (
+ (rgb_matrix_config.enable == RGB_ZONE_KEYS && !is_key) ||
+ (rgb_matrix_config.enable == RGB_ZONE_UNDER && is_key)
+ ) {
+ rgb_matrix_driver.set_color(index, 0, 0, 0);
+ return;
+ }
+#endif
+
rgb_matrix_driver.set_color(index, red, green, blue);
}
void rgb_matrix_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) {
+#ifdef RGB_MATRIX_EXTRA_TOG
+ for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+ rgb_matrix_set_color(i, red, green, blue);
+ }
+#else
rgb_matrix_driver.set_color_all(red, green, blue);
+#endif
}
bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record) {
@@ -494,7 +511,7 @@ void rgb_matrix_set_suspend_state(bool state) {
}
void rgb_matrix_toggle(void) {
- rgb_matrix_config.enable ^= 1;
+ rgb_matrix_config.enable++;
if (!rgb_matrix_config.enable) {
rgb_task_state = STARTING;
}
diff --git a/quantum/rgb_matrix_types.h b/quantum/rgb_matrix_types.h
index f7643d2b0c..908e96da56 100644
--- a/quantum/rgb_matrix_types.h
+++ b/quantum/rgb_matrix_types.h
@@ -73,11 +73,18 @@ typedef struct PACKED {
uint8_t modifier:1;
} rgb_led;
+typedef enum {
+ RGB_ZONE_OFF = 0,
+ RGB_ZONE_ALL,
+ RGB_ZONE_KEYS,
+ RGB_ZONE_UNDER,
+} rgb_zone_t;
+
typedef union {
uint32_t raw;
struct PACKED {
- bool enable :1;
- uint8_t mode :7;
+ uint8_t enable :2;
+ uint8_t mode :6;
uint8_t hue :8;
uint8_t sat :8;
uint8_t val :8;
diff --git a/tmk_core/common/arm_atsam/suspend.c b/tmk_core/common/arm_atsam/suspend.c
index e34965df64..9c2c47d561 100644
--- a/tmk_core/common/arm_atsam/suspend.c
+++ b/tmk_core/common/arm_atsam/suspend.c
@@ -35,7 +35,9 @@ void suspend_power_down_kb(void) {
*/
void suspend_power_down(void)
{
+#ifdef RGB_MATRIX_ENABLE
I2C3733_Control_Set(0); //Disable LED driver
+#endif
suspend_power_down_kb();
}
@@ -75,10 +77,9 @@ void suspend_wakeup_init_kb(void) {
* FIXME: needs doc
*/
void suspend_wakeup_init(void) {
- /* If LEDs are set to enabled, enable the hardware */
- if (led_enabled) {
- I2C3733_Control_Set(1);
- }
+#ifdef RGB_MATRIX_ENABLE
+ I2C3733_Control_Set(1);
+#endif
suspend_wakeup_init_kb();
}
diff --git a/tmk_core/protocol/arm_atsam.mk b/tmk_core/protocol/arm_atsam.mk
index 04e02790a0..8d6f724f09 100644
--- a/tmk_core/protocol/arm_atsam.mk
+++ b/tmk_core/protocol/arm_atsam.mk
@@ -4,7 +4,10 @@ SRC += $(ARM_ATSAM_DIR)/adc.c
SRC += $(ARM_ATSAM_DIR)/clks.c
SRC += $(ARM_ATSAM_DIR)/d51_util.c
SRC += $(ARM_ATSAM_DIR)/i2c_master.c
-SRC += $(ARM_ATSAM_DIR)/led_matrix.c
+ifeq ($(RGB_MATRIX_ENABLE),custom)
+ SRC += $(ARM_ATSAM_DIR)/led_matrix_programs.c
+ SRC += $(ARM_ATSAM_DIR)/led_matrix.c
+endif
SRC += $(ARM_ATSAM_DIR)/main_arm_atsam.c
SRC += $(ARM_ATSAM_DIR)/spi.c
SRC += $(ARM_ATSAM_DIR)/startup.c
diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
index 928af8c7e1..88109186aa 100644
--- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
+++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
@@ -34,7 +34,10 @@ along with this program. If not, see .
#ifndef MD_BOOTLOADER
#include "main_arm_atsam.h"
+#ifdef RGB_MATRIX_ENABLE
#include "led_matrix.h"
+#include "rgb_matrix.h"
+#endif
#include "issi3733_driver.h"
#include "./usb/compiler.h"
#include "./usb/udc.h"
diff --git a/tmk_core/protocol/arm_atsam/i2c_master.c b/tmk_core/protocol/arm_atsam/i2c_master.c
index d91a851f37..1741d9ac5b 100644
--- a/tmk_core/protocol/arm_atsam/i2c_master.c
+++ b/tmk_core/protocol/arm_atsam/i2c_master.c
@@ -17,7 +17,7 @@ along with this program. If not, see .
#include "arm_atsam_protocol.h"
-#ifndef MD_BOOTLOADER
+#if !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE)
#include
@@ -37,7 +37,7 @@ static uint8_t dma_sendbuf[I2C_DMA_MAX_SEND]; //Data being written to I2C
volatile uint8_t i2c_led_q_running;
-#endif //MD_BOOTLOADER
+#endif // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE)
void i2c0_init(void)
{
@@ -112,7 +112,7 @@ void i2c0_stop(void)
}
}
-#ifndef MD_BOOTLOADER
+#if !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE)
void i2c1_init(void)
{
DBGC(DC_I2C1_INIT_BEGIN);
@@ -583,4 +583,4 @@ uint8_t i2c_led_q_run(void)
return 1;
}
-#endif //MD_BOOTLOADER
+#endif // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE)
diff --git a/tmk_core/protocol/arm_atsam/led_matrix.c b/tmk_core/protocol/arm_atsam/led_matrix.c
index 04d05af6db..e29fb6587c 100644
--- a/tmk_core/protocol/arm_atsam/led_matrix.c
+++ b/tmk_core/protocol/arm_atsam/led_matrix.c
@@ -17,9 +17,19 @@ along with this program. If not, see .
#include "arm_atsam_protocol.h"
#include "tmk_core/common/led.h"
+#include "rgb_matrix.h"
#include
#include
+#ifdef USE_MASSDROP_CONFIGURATOR
+__attribute__((weak))
+led_instruction_t led_instructions[] = { { .end = 1 } };
+static void led_matrix_massdrop_config_override(int i);
+#endif // USE_MASSDROP_CONFIGURATOR
+
+extern rgb_config_t rgb_matrix_config;
+extern rgb_counters_t g_rgb_counters;
+
void SERCOM1_0_Handler( void )
{
if (SERCOM1->I2CM.INTFLAG.bit.ERROR)
@@ -51,14 +61,17 @@ void DMAC_0_Handler( void )
issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT];
-issi3733_led_t led_map[ISSI3733_LED_COUNT+1] = ISSI3733_LED_MAP;
-issi3733_led_t *lede = led_map + ISSI3733_LED_COUNT; //End pointer of mapping
+issi3733_led_t led_map[ISSI3733_LED_COUNT] = ISSI3733_LED_MAP;
+RGB led_buffer[ISSI3733_LED_COUNT];
uint8_t gcr_desired;
-uint8_t gcr_breathe;
-uint8_t gcr_use;
uint8_t gcr_actual;
uint8_t gcr_actual_last;
+#ifdef USE_MASSDROP_CONFIGURATOR
+uint8_t gcr_breathe;
+float breathe_mult;
+float pomod;
+#endif
#define ACT_GCR_NONE 0
#define ACT_GCR_INC 1
@@ -73,11 +86,14 @@ static uint8_t v_5v_cat_hit;
void gcr_compute(void)
{
uint8_t action = ACT_GCR_NONE;
+ uint8_t gcr_use = gcr_desired;
+#ifdef USE_MASSDROP_CONFIGURATOR
if (led_animation_breathing)
+ {
gcr_use = gcr_breathe;
- else
- gcr_use = gcr_desired;
+ }
+#endif
//If the 5v takes a catastrophic hit, disable the LED drivers briefly, assert auto gcr mode, min gcr and let the auto take over
if (v_5v < V5_CAT)
@@ -151,6 +167,7 @@ void gcr_compute(void)
gcr_actual -= LED_GCR_STEP_AUTO;
gcr_min_counter = 0;
+#ifdef USE_MASSDROP_CONFIGURATOR
//If breathe mode is active, the top end can fluctuate if the host can not supply enough current
//So set the breathe GCR to where it becomes stable
if (led_animation_breathing == 1)
@@ -160,12 +177,11 @@ void gcr_compute(void)
// and the same would happen maybe one or two more times. Therefore I'm favoring
// powering through one full breathe and letting gcr settle completely
}
+#endif
}
}
}
-led_disp_t disp;
-
void issi3733_prepare_arrays(void)
{
memset(issidrv,0,sizeof(issi3733_driver_t) * ISSI3733_DRIVER_COUNT);
@@ -178,361 +194,309 @@ void issi3733_prepare_arrays(void)
issidrv[i].addr = addrs[i];
}
- issi3733_led_t *cur = led_map;
-
- while (cur < lede)
+ for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++)
{
//BYTE: 1 + (SW-1)*16 + (CS-1)
- cur->rgb.g = issidrv[cur->adr.drv-1].pwm + 1 + ((cur->adr.swg-1)*16 + (cur->adr.cs-1));
- cur->rgb.r = issidrv[cur->adr.drv-1].pwm + 1 + ((cur->adr.swr-1)*16 + (cur->adr.cs-1));
- cur->rgb.b = issidrv[cur->adr.drv-1].pwm + 1 + ((cur->adr.swb-1)*16 + (cur->adr.cs-1));
+ led_map[i].rgb.g = issidrv[led_map[i].adr.drv-1].pwm + 1 + ((led_map[i].adr.swg-1)*16 + (led_map[i].adr.cs-1));
+ led_map[i].rgb.r = issidrv[led_map[i].adr.drv-1].pwm + 1 + ((led_map[i].adr.swr-1)*16 + (led_map[i].adr.cs-1));
+ led_map[i].rgb.b = issidrv[led_map[i].adr.drv-1].pwm + 1 + ((led_map[i].adr.swb-1)*16 + (led_map[i].adr.cs-1));
//BYTE: 1 + (SW-1)*2 + (CS-1)/8
//BIT: (CS-1)%8
- *(issidrv[cur->adr.drv-1].onoff + 1 + (cur->adr.swg-1)*2+(cur->adr.cs-1)/8) |= (1<<((cur->adr.cs-1)%8));
- *(issidrv[cur->adr.drv-1].onoff + 1 + (cur->adr.swr-1)*2+(cur->adr.cs-1)/8) |= (1<<((cur->adr.cs-1)%8));
- *(issidrv[cur->adr.drv-1].onoff + 1 + (cur->adr.swb-1)*2+(cur->adr.cs-1)/8) |= (1<<((cur->adr.cs-1)%8));
-
- cur++;
+ *(issidrv[led_map[i].adr.drv-1].onoff + 1 + (led_map[i].adr.swg-1)*2+(led_map[i].adr.cs-1)/8) |= (1<<((led_map[i].adr.cs-1)%8));
+ *(issidrv[led_map[i].adr.drv-1].onoff + 1 + (led_map[i].adr.swr-1)*2+(led_map[i].adr.cs-1)/8) |= (1<<((led_map[i].adr.cs-1)%8));
+ *(issidrv[led_map[i].adr.drv-1].onoff + 1 + (led_map[i].adr.swb-1)*2+(led_map[i].adr.cs-1)/8) |= (1<<((led_map[i].adr.cs-1)%8));
}
}
-void disp_calc_extents(void)
+void led_matrix_prepare(void)
{
- issi3733_led_t *cur = led_map;
-
- disp.left = 1e10;
- disp.right = -1e10;
- disp.top = -1e10;
- disp.bottom = 1e10;
-
- while (cur < lede)
+ for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++)
{
- if (cur->x < disp.left) disp.left = cur->x;
- if (cur->x > disp.right) disp.right = cur->x;
- if (cur->y < disp.bottom) disp.bottom = cur->y;
- if (cur->y > disp.top) disp.top = cur->y;
-
- cur++;
+ *led_map[i].rgb.r = 0;
+ *led_map[i].rgb.g = 0;
+ *led_map[i].rgb.b = 0;
}
-
- disp.width = disp.right - disp.left;
- disp.height = disp.top - disp.bottom;
- disp.max_distance = sqrtf(powf(disp.width, 2) + powf(disp.height, 2));
}
-void disp_pixel_setup(void)
+void led_set_one(int i, uint8_t r, uint8_t g, uint8_t b)
{
- issi3733_led_t *cur = led_map;
-
- while (cur < lede)
+ if (i < ISSI3733_LED_COUNT)
{
- cur->px = (cur->x - disp.left) / disp.width * 100;
- cur->py = (cur->y - disp.bottom) / disp.height * 100;
- *cur->rgb.r = 0;
- *cur->rgb.g = 0;
- *cur->rgb.b = 0;
-
- cur++;
+#ifdef USE_MASSDROP_CONFIGURATOR
+ led_matrix_massdrop_config_override(i);
+#else
+ led_buffer[i].r = r;
+ led_buffer[i].g = g;
+ led_buffer[i].b = b;
+#endif
}
}
-void led_matrix_prepare(void)
+void led_set_all(uint8_t r, uint8_t g, uint8_t b)
{
- disp_calc_extents();
- disp_pixel_setup();
+ for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++)
+ {
+ led_set_one(i, r, g, b);
+ }
}
-uint8_t led_enabled;
-float led_animation_speed;
-uint8_t led_animation_direction;
-uint8_t led_animation_orientation;
-uint8_t led_animation_breathing;
-uint8_t led_animation_breathe_cur;
-uint8_t breathe_step;
-uint8_t breathe_dir;
-uint8_t led_animation_circular;
-uint64_t led_next_run;
-
-uint8_t led_animation_id;
-uint8_t led_lighting_mode;
-
-issi3733_led_t *led_cur;
-uint8_t led_per_run = 15;
-float breathe_mult;
-
-__attribute__ ((weak))
-void led_matrix_run(void)
+void init(void)
{
- float ro;
- float go;
- float bo;
- float po;
-
- uint8_t led_this_run = 0;
- led_setup_t *f = (led_setup_t*)led_setups[led_animation_id];
-
- if (led_cur == 0) //Denotes start of new processing cycle in the case of chunked processing
- {
- led_cur = led_map;
+ DBGC(DC_LED_MATRIX_INIT_BEGIN);
- disp.frame += 1;
+ issi3733_prepare_arrays();
- breathe_mult = 1;
+ led_matrix_prepare();
- if (led_animation_breathing)
- {
- led_animation_breathe_cur += breathe_step * breathe_dir;
+ gcr_min_counter = 0;
+ v_5v_cat_hit = 0;
- if (led_animation_breathe_cur >= BREATHE_MAX_STEP)
- breathe_dir = -1;
- else if (led_animation_breathe_cur <= BREATHE_MIN_STEP)
- breathe_dir = 1;
+ DBGC(DC_LED_MATRIX_INIT_COMPLETE);
+}
- //Brightness curve created for 256 steps, 0 - ~98%
- breathe_mult = 0.000015 * led_animation_breathe_cur * led_animation_breathe_cur;
- if (breathe_mult > 1) breathe_mult = 1;
- else if (breathe_mult < 0) breathe_mult = 0;
- }
- }
+void flush(void)
+{
+#ifdef USE_MASSDROP_CONFIGURATOR
+ if (!led_enabled) { return; } //Prevent calculations and I2C traffic if LED drivers are not enabled
+#else
+ if (!sr_exp_data.bit.SDB_N) { return; } //Prevent calculations and I2C traffic if LED drivers are not enabled
+#endif
- uint8_t fcur = 0;
- uint8_t fmax = 0;
+ // Wait for previous transfer to complete
+ while (i2c_led_q_running) {}
- //Frames setup
- while (f[fcur].end != 1)
+ // Copy buffer to live DMA region
+ for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++)
{
- fcur++; //Count frames
+ *led_map[i].rgb.r = led_buffer[i].r;
+ *led_map[i].rgb.g = led_buffer[i].g;
+ *led_map[i].rgb.b = led_buffer[i].b;
}
- fmax = fcur; //Store total frames count
+#ifdef USE_MASSDROP_CONFIGURATOR
+ breathe_mult = 1;
- while (led_cur < lede && led_this_run < led_per_run)
+ if (led_animation_breathing)
{
- ro = 0;
- go = 0;
- bo = 0;
-
- if (led_lighting_mode == LED_MODE_KEYS_ONLY && led_cur->scan == 255)
- {
- //Do not act on this LED
- }
- else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && led_cur->scan != 255)
- {
- //Do not act on this LED
- }
- else if (led_lighting_mode == LED_MODE_INDICATORS_ONLY)
- {
- //Do not act on this LED (Only show indicators)
- }
- else
- {
- //Act on LED
- for (fcur = 0; fcur < fmax; fcur++)
- {
-
- if (led_animation_circular) {
- po = sqrtf((powf(fabsf((disp.width / 2) - (led_cur->x - disp.left)), 2) + powf(fabsf((disp.height / 2) - (led_cur->y - disp.bottom)), 2))) / disp.max_distance * 100;
- }
- else {
- if (led_animation_orientation)
- {
- po = led_cur->py;
- }
- else
- {
- po = led_cur->px;
- }
- }
-
- float pomod;
- pomod = (float)(disp.frame % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed;
-
- //Add in any moving effects
- if ((!led_animation_direction && f[fcur].ef & EF_SCR_R) || (led_animation_direction && (f[fcur].ef & EF_SCR_L)))
- {
- pomod *= 100.0f;
- pomod = (uint32_t)pomod % 10000;
- pomod /= 100.0f;
-
- po -= pomod;
-
- if (po > 100) po -= 100;
- else if (po < 0) po += 100;
- }
- else if ((!led_animation_direction && f[fcur].ef & EF_SCR_L) || (led_animation_direction && (f[fcur].ef & EF_SCR_R)))
- {
- pomod *= 100.0f;
- pomod = (uint32_t)pomod % 10000;
- pomod /= 100.0f;
- po += pomod;
-
- if (po > 100) po -= 100;
- else if (po < 0) po += 100;
- }
+ //+60us 119 LED
+ led_animation_breathe_cur += BREATHE_STEP * breathe_dir;
+
+ if (led_animation_breathe_cur >= BREATHE_MAX_STEP)
+ breathe_dir = -1;
+ else if (led_animation_breathe_cur <= BREATHE_MIN_STEP)
+ breathe_dir = 1;
+
+ //Brightness curve created for 256 steps, 0 - ~98%
+ breathe_mult = 0.000015 * led_animation_breathe_cur * led_animation_breathe_cur;
+ if (breathe_mult > 1) breathe_mult = 1;
+ else if (breathe_mult < 0) breathe_mult = 0;
+ }
- //Check if LED's po is in current frame
- if (po < f[fcur].hs) continue;
- if (po > f[fcur].he) continue;
- //note: < 0 or > 100 continue
+ //This should only be performed once per frame
+ pomod = (float)((g_rgb_counters.tick / 10) % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed;
+ pomod *= 100.0f;
+ pomod = (uint32_t)pomod % 10000;
+ pomod /= 100.0f;
- //Calculate the po within the start-stop percentage for color blending
- po = (po - f[fcur].hs) / (f[fcur].he - f[fcur].hs);
+#endif // USE_MASSDROP_CONFIGURATOR
- //Add in any color effects
- if (f[fcur].ef & EF_OVER)
- {
- ro = (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5;
- go = (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5;
- bo = (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5;
- }
- else if (f[fcur].ef & EF_SUBTRACT)
- {
- ro -= (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5;
- go -= (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5;
- bo -= (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5;
- }
- else
- {
- ro += (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5;
- go += (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5;
- bo += (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5;
- }
- }
- }
+ uint8_t drvid;
- //Clamp values 0-255
- if (ro > 255) ro = 255; else if (ro < 0) ro = 0;
- if (go > 255) go = 255; else if (go < 0) go = 0;
- if (bo > 255) bo = 255; else if (bo < 0) bo = 0;
+ //NOTE: GCR does not need to be timed with LED processing, but there is really no harm
+ if (gcr_actual != gcr_actual_last)
+ {
+ for (drvid=0;drvidrgb.r = (uint8_t)ro;
- *led_cur->rgb.g = (uint8_t)go;
- *led_cur->rgb.b = (uint8_t)bo;
+ i2c_led_q_run();
+}
-#ifdef USB_LED_INDICATOR_ENABLE
- if (keyboard_leds())
+void led_matrix_indicators(void)
+{
+ uint8_t kbled = keyboard_leds();
+ if (kbled && rgb_matrix_config.enable)
+ {
+ for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++)
{
- uint8_t kbled = keyboard_leds();
if (
- #if USB_LED_NUM_LOCK_SCANCODE != 255
- (led_cur->scan == USB_LED_NUM_LOCK_SCANCODE && kbled & (1<scan == USB_LED_CAPS_LOCK_SCANCODE && kbled & (1<scan == USB_LED_SCROLL_LOCK_SCANCODE && kbled & (1<scan == USB_LED_COMPOSE_SCANCODE && kbled & (1<scan == USB_LED_KANA_SCANCODE && kbled & (1<rgb.r > 127) *led_cur->rgb.r = 0;
- else *led_cur->rgb.r = 255;
- if (*led_cur->rgb.g > 127) *led_cur->rgb.g = 0;
- else *led_cur->rgb.g = 255;
- if (*led_cur->rgb.b > 127) *led_cur->rgb.b = 0;
- else *led_cur->rgb.b = 255;
+ led_buffer[i].r = 255 - led_buffer[i].r;
+ led_buffer[i].g = 255 - led_buffer[i].g;
+ led_buffer[i].b = 255 - led_buffer[i].b;
}
}
-#endif //USB_LED_INDICATOR_ENABLE
-
- led_cur++;
- led_this_run++;
}
-}
-uint8_t led_matrix_init(void)
-{
- DBGC(DC_LED_MATRIX_INIT_BEGIN);
+}
- issi3733_prepare_arrays();
+const rgb_matrix_driver_t rgb_matrix_driver = {
+ .init = init,
+ .flush = flush,
+ .set_color = led_set_one,
+ .set_color_all = led_set_all
+};
+
+/*==============================================================================
+= Legacy Lighting Support =
+==============================================================================*/
+
+#ifdef USE_MASSDROP_CONFIGURATOR
+// Ported from Massdrop QMK Github Repo
+
+// TODO?: wire these up to keymap.c
+uint8_t led_animation_orientation = 0;
+uint8_t led_animation_direction = 0;
+uint8_t led_animation_breathing = 0;
+uint8_t led_animation_id = 0;
+float led_animation_speed = 4.0f;
+uint8_t led_lighting_mode = LED_MODE_NORMAL;
+uint8_t led_enabled = 1;
+uint8_t led_animation_breathe_cur = BREATHE_MIN_STEP;
+uint8_t breathe_dir = 1;
+
+static void led_run_pattern(led_setup_t *f, float* ro, float* go, float* bo, float pos) {
+ float po;
- led_matrix_prepare();
+ while (f->end != 1)
+ {
+ po = pos; //Reset po for new frame
- disp.frame = 0;
- led_next_run = 0;
-
- led_enabled = 1;
- led_animation_id = 0;
- led_lighting_mode = LED_MODE_NORMAL;
- led_animation_speed = 4.0f;
- led_animation_direction = 0;
- led_animation_orientation = 0;
- led_animation_breathing = 0;
- led_animation_breathe_cur = BREATHE_MIN_STEP;
- breathe_step = 1;
- breathe_dir = 1;
- led_animation_circular = 0;
+ //Add in any moving effects
+ if ((!led_animation_direction && f->ef & EF_SCR_R) || (led_animation_direction && (f->ef & EF_SCR_L)))
+ {
+ po -= pomod;
- gcr_min_counter = 0;
- v_5v_cat_hit = 0;
+ if (po > 100) po -= 100;
+ else if (po < 0) po += 100;
+ }
+ else if ((!led_animation_direction && f->ef & EF_SCR_L) || (led_animation_direction && (f->ef & EF_SCR_R)))
+ {
+ po += pomod;
- //Run led matrix code once for initial LED coloring
- led_cur = 0;
- rgb_matrix_init_user();
- led_matrix_run();
+ if (po > 100) po -= 100;
+ else if (po < 0) po += 100;
+ }
- DBGC(DC_LED_MATRIX_INIT_COMPLETE);
+ //Check if LED's po is in current frame
+ if (po < f->hs) { f++; continue; }
+ if (po > f->he) { f++; continue; }
+ //note: < 0 or > 100 continue
- return 0;
-}
+ //Calculate the po within the start-stop percentage for color blending
+ po = (po - f->hs) / (f->he - f->hs);
-__attribute__ ((weak))
-void rgb_matrix_init_user(void) {
+ //Add in any color effects
+ if (f->ef & EF_OVER)
+ {
+ *ro = (po * (f->re - f->rs)) + f->rs;// + 0.5;
+ *go = (po * (f->ge - f->gs)) + f->gs;// + 0.5;
+ *bo = (po * (f->be - f->bs)) + f->bs;// + 0.5;
+ }
+ else if (f->ef & EF_SUBTRACT)
+ {
+ *ro -= (po * (f->re - f->rs)) + f->rs;// + 0.5;
+ *go -= (po * (f->ge - f->gs)) + f->gs;// + 0.5;
+ *bo -= (po * (f->be - f->bs)) + f->bs;// + 0.5;
+ }
+ else
+ {
+ *ro += (po * (f->re - f->rs)) + f->rs;// + 0.5;
+ *go += (po * (f->ge - f->gs)) + f->gs;// + 0.5;
+ *bo += (po * (f->be - f->bs)) + f->bs;// + 0.5;
+ }
+ f++;
+ }
}
-#define LED_UPDATE_RATE 10 //ms
-
-//led data processing can take time, so process data in chunks to free up the processor
-//this is done through led_cur and lede
-void led_matrix_task(void)
+static void led_matrix_massdrop_config_override(int i)
{
- if (led_enabled)
- {
- //If an update may run and frame processing has completed
- if (timer_read64() >= led_next_run && led_cur == lede)
- {
- uint8_t drvid;
+ float ro = 0;
+ float go = 0;
+ float bo = 0;
+
+ float po = (led_animation_orientation)
+ ? (float)g_rgb_leds[i].point.y / 64.f * 100
+ : (float)g_rgb_leds[i].point.x / 224.f * 100;
+
+ uint8_t highest_active_layer = biton32(layer_state);
+
+ if (led_lighting_mode == LED_MODE_KEYS_ONLY && g_rgb_leds[i].matrix_co.raw == 0xff) {
+ //Do not act on this LED
+ } else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && g_rgb_leds[i].matrix_co.raw != 0xff) {
+ //Do not act on this LED
+ } else if (led_lighting_mode == LED_MODE_INDICATORS_ONLY) {
+ //Do not act on this LED (Only show indicators)
+ } else {
+ led_instruction_t* led_cur_instruction = led_instructions;
+ while (!led_cur_instruction->end) {
+ // Check if this applies to current layer
+ if ((led_cur_instruction->flags & LED_FLAG_MATCH_LAYER) &&
+ (led_cur_instruction->layer != highest_active_layer)) {
+ goto next_iter;
+ }
- led_next_run = timer_read64() + LED_UPDATE_RATE; //Set next frame update time
+ // Check if this applies to current index
+ if (led_cur_instruction->flags & LED_FLAG_MATCH_ID) {
+ uint8_t modid = i / 32; //Calculate which id# contains the led bit
+ uint32_t modidbit = 1 << (i % 32); //Calculate the bit within the id#
+ uint32_t *bitfield = &led_cur_instruction->id0 + modid; //Add modid as offset to id0 address. *bitfield is now idX of the led id
+ if (~(*bitfield) & modidbit) { //Check if led bit is not set in idX
+ goto next_iter;
+ }
+ }
- //NOTE: GCR does not need to be timed with LED processing, but there is really no harm
- if (gcr_actual != gcr_actual_last)
- {
- for (drvid=0;drvidflags & LED_FLAG_USE_RGB) {
+ ro = led_cur_instruction->r;
+ go = led_cur_instruction->g;
+ bo = led_cur_instruction->b;
+ } else if (led_cur_instruction->flags & LED_FLAG_USE_PATTERN) {
+ led_run_pattern(led_setups[led_cur_instruction->pattern_id], &ro, &go, &bo, po);
+ } else if (led_cur_instruction->flags & LED_FLAG_USE_ROTATE_PATTERN) {
+ led_run_pattern(led_setups[led_animation_id], &ro, &go, &bo, po);
}
- for (drvid=0;drvid 255) ro = 255; else if (ro < 0) ro = 0;
+ if (go > 255) go = 255; else if (go < 0) go = 0;
+ if (bo > 255) bo = 255; else if (bo < 0) bo = 0;
- led_cur = 0; //Signal next frame calculations may begin
+ if (led_animation_breathing)
+ {
+ ro *= breathe_mult;
+ go *= breathe_mult;
+ bo *= breathe_mult;
}
}
- //Process more data if not finished
- if (led_cur != lede)
- {
- //DBG_1_OFF; //debug profiling
- led_matrix_run();
- //DBG_1_ON; //debug profiling
- }
+ led_buffer[i].r = (uint8_t)ro;
+ led_buffer[i].g = (uint8_t)go;
+ led_buffer[i].b = (uint8_t)bo;
}
+#endif // USE_MASSDROP_CONFIGURATOR
diff --git a/tmk_core/protocol/arm_atsam/led_matrix.h b/tmk_core/protocol/arm_atsam/led_matrix.h
index 4513234e7f..1316efd9a4 100644
--- a/tmk_core/protocol/arm_atsam/led_matrix.h
+++ b/tmk_core/protocol/arm_atsam/led_matrix.h
@@ -18,6 +18,8 @@ along with this program. If not, see .
#ifndef _LED_MATRIX_H_
#define _LED_MATRIX_H_
+#include "quantum.h"
+
//From keyboard
#include "config_led.h"
@@ -75,25 +77,20 @@ typedef struct issi3733_led_s {
uint8_t scan; //Key scan code from wiring (set 0xFF if no key)
} issi3733_led_t;
-typedef struct led_disp_s {
- uint64_t frame;
- float left;
- float right;
- float top;
- float bottom;
- float width;
- float height;
- float max_distance;
-} led_disp_t;
+extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT];
-uint8_t led_matrix_init(void);
-void rgb_matrix_init_user(void);
+extern uint8_t gcr_desired;
+extern uint8_t gcr_breathe;
+extern uint8_t gcr_actual;
+extern uint8_t gcr_actual_last;
-#define LED_MODE_NORMAL 0 //Must be 0
-#define LED_MODE_KEYS_ONLY 1
-#define LED_MODE_NON_KEYS_ONLY 2
-#define LED_MODE_INDICATORS_ONLY 3
-#define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY //Must be highest value
+void gcr_compute(void);
+
+void led_matrix_indicators(void);
+
+/*------------------------- Legacy Lighting Support ------------------------*/
+
+#ifdef USE_MASSDROP_CONFIGURATOR
#define EF_NONE 0x00000000 //No effect
#define EF_OVER 0x00000001 //Overwrite any previous color information with new
@@ -114,33 +111,48 @@ typedef struct led_setup_s {
uint8_t end; //Set to signal end of the setup
} led_setup_t;
-extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT];
+extern const uint8_t led_setups_count;
+extern void *led_setups[];
-extern uint8_t gcr_desired;
-extern uint8_t gcr_breathe;
-extern uint8_t gcr_actual;
-extern uint8_t gcr_actual_last;
+//LED Extra Instructions
+#define LED_FLAG_NULL 0x00 //Matching and coloring not used (default)
+#define LED_FLAG_MATCH_ID 0x01 //Match on the ID of the LED (set id#'s to desired bit pattern, first LED is id 1)
+#define LED_FLAG_MATCH_LAYER 0x02 //Match on the current active layer (set layer to desired match layer)
+#define LED_FLAG_USE_RGB 0x10 //Use a specific RGB value (set r, g, b to desired output color values)
+#define LED_FLAG_USE_PATTERN 0x20 //Use a specific pattern ID (set pattern_id to desired output pattern)
+#define LED_FLAG_USE_ROTATE_PATTERN 0x40 //Use pattern the user has cycled to manually
+
+typedef struct led_instruction_s {
+ uint16_t flags; // Bitfield for LED instructions
+ uint32_t id0; // Bitwise id, IDs 0-31
+ uint32_t id1; // Bitwise id, IDs 32-63
+ uint32_t id2; // Bitwise id, IDs 64-95
+ uint32_t id3; // Bitwise id, IDs 96-127
+ uint8_t layer;
+ uint8_t r;
+ uint8_t g;
+ uint8_t b;
+ uint8_t pattern_id;
+ uint8_t end;
+} led_instruction_t;
+
+extern led_instruction_t led_instructions[];
+extern uint8_t led_animation_breathing;
extern uint8_t led_animation_id;
-extern uint8_t led_enabled;
extern float led_animation_speed;
extern uint8_t led_lighting_mode;
-extern uint8_t led_animation_direction;
-extern uint8_t led_animation_orientation;
-extern uint8_t led_animation_breathing;
+extern uint8_t led_enabled;
extern uint8_t led_animation_breathe_cur;
+extern uint8_t led_animation_direction;
extern uint8_t breathe_dir;
-extern uint8_t led_animation_circular;
-extern const uint8_t led_setups_count;
-extern void *led_setups[];
-
-extern issi3733_led_t *led_cur;
-extern issi3733_led_t *lede;
-
-void led_matrix_run(void);
-void led_matrix_task(void);
+#define LED_MODE_NORMAL 0 //Must be 0
+#define LED_MODE_KEYS_ONLY 1
+#define LED_MODE_NON_KEYS_ONLY 2
+#define LED_MODE_INDICATORS_ONLY 3
+#define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY //Must be highest value
-void gcr_compute(void);
+#endif // USE_MASSDROP_CONFIGURATOR
#endif //_LED_MATRIX_H_
diff --git a/tmk_core/protocol/arm_atsam/led_matrix_programs.c b/tmk_core/protocol/arm_atsam/led_matrix_programs.c
new file mode 100644
index 0000000000..cf7478dc31
--- /dev/null
+++ b/tmk_core/protocol/arm_atsam/led_matrix_programs.c
@@ -0,0 +1,123 @@
+/*
+Copyright 2018 Massdrop Inc.
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#ifdef USE_MASSDROP_CONFIGURATOR
+
+#include "led_matrix.h"
+
+//Teal <-> Salmon
+led_setup_t leds_teal_salmon[] = {
+ { .hs = 0, .he = 33, .rs = 24, .re = 24, .gs = 215, .ge = 215, .bs = 204, .be = 204, .ef = EF_NONE },
+ { .hs = 33, .he = 66, .rs = 24, .re = 255, .gs = 215, .ge = 114, .bs = 204, .be = 118, .ef = EF_NONE },
+ { .hs = 66, .he = 100, .rs = 255, .re = 255, .gs = 114, .ge = 114, .bs = 118, .be = 118, .ef = EF_NONE },
+ { .end = 1 },
+};
+
+//Yellow
+led_setup_t leds_yellow[] = {
+ { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE },
+ { .end = 1 },
+};
+
+//Off
+led_setup_t leds_off[] = {
+ { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE },
+ { .end = 1 },
+};
+
+//Red
+led_setup_t leds_red[] = {
+ { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE },
+ { .end = 1 },
+};
+
+//Green
+led_setup_t leds_green[] = {
+ { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE },
+ { .end = 1 },
+};
+
+//Blue
+led_setup_t leds_blue[] = {
+ { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_NONE },
+ { .end = 1 },
+};
+
+//White
+led_setup_t leds_white[] = {
+ { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE },
+ { .end = 1 },
+};
+
+//White with moving red stripe
+led_setup_t leds_white_with_red_stripe[] = {
+ { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE },
+ { .hs = 0, .he = 15, .rs = 0, .re = 0, .gs = 0, .ge = 255, .bs = 0, .be = 255, .ef = EF_SCR_R | EF_SUBTRACT },
+ { .hs = 15, .he = 30, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 0, .ef = EF_SCR_R | EF_SUBTRACT },
+ { .end = 1 },
+};
+
+//Black with moving red stripe
+led_setup_t leds_black_with_red_stripe[] = {
+ { .hs = 0, .he = 15, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R },
+ { .hs = 15, .he = 30, .rs = 255, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R },
+ { .end = 1 },
+};
+
+//Rainbow no scrolling
+led_setup_t leds_rainbow_ns[] = {
+ { .hs = 0, .he = 16.67, .rs = 255, .re = 255, .gs = 0, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER },
+ { .hs = 16.67, .he = 33.33, .rs = 255, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER },
+ { .hs = 33.33, .he = 50, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 255, .ef = EF_OVER },
+ { .hs = 50, .he = 66.67, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER },
+ { .hs = 66.67, .he = 83.33, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER },
+ { .hs = 83.33, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 0, .ef = EF_OVER },
+ { .end = 1 },
+};
+
+//Rainbow scrolling
+led_setup_t leds_rainbow_s[] = {
+ { .hs = 0, .he = 16.67, .rs = 255, .re = 255, .gs = 0, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER | EF_SCR_R },
+ { .hs = 16.67, .he = 33.33, .rs = 255, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER | EF_SCR_R },
+ { .hs = 33.33, .he = 50, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 255, .ef = EF_OVER | EF_SCR_R },
+ { .hs = 50, .he = 66.67, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R },
+ { .hs = 66.67, .he = 83.33, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R },
+ { .hs = 83.33, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 0, .ef = EF_OVER | EF_SCR_R },
+ { .end = 1 },
+};
+
+//Add new LED animations here using one from above as example
+//The last entry must be { .end = 1 }
+//Add the new animation name to the list below following its format
+
+void *led_setups[] = {
+ leds_rainbow_s,
+ leds_rainbow_ns,
+ leds_teal_salmon,
+ leds_yellow,
+ leds_red,
+ leds_green,
+ leds_blue,
+ leds_white,
+ leds_white_with_red_stripe,
+ leds_black_with_red_stripe,
+ leds_off
+};
+
+const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]);
+
+#endif
diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c
index eaad66e9fc..0974a230d4 100644
--- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c
+++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c
@@ -203,13 +203,6 @@ void main_subtask_usb_state(void)
}
}
-void main_subtask_led(void)
-{
- if (g_usb_state != USB_FSMSTATUS_FSMSTATE_ON_Val) return; //Only run LED tasks if USB is operating
-
- led_matrix_task();
-}
-
void main_subtask_power_check(void)
{
static uint64_t next_5v_checkup = 0;
@@ -221,7 +214,9 @@ void main_subtask_power_check(void)
v_5v = adc_get(ADC_5V);
v_5v_avg = 0.9 * v_5v_avg + 0.1 * v_5v;
+#ifdef RGB_MATRIX_ENABLE
gcr_compute();
+#endif
}
}
@@ -240,7 +235,6 @@ void main_subtask_usb_extra_device(void)
void main_subtasks(void)
{
main_subtask_usb_state();
- main_subtask_led();
main_subtask_power_check();
main_subtask_usb_extra_device();
}
@@ -263,7 +257,9 @@ int main(void)
SR_EXP_Init();
+#ifdef RGB_MATRIX_ENABLE
i2c1_init();
+#endif // RGB_MATRIX_ENABLE
matrix_init();
@@ -281,8 +277,7 @@ int main(void)
DBG_LED_OFF;
- led_matrix_init();
-
+#ifdef RGB_MATRIX_ENABLE
while (I2C3733_Init_Control() != 1) {}
while (I2C3733_Init_Drivers() != 1) {}
@@ -292,6 +287,7 @@ int main(void)
for (uint8_t drvid = 0; drvid < ISSI3733_DRIVER_COUNT; drvid++)
I2C_LED_Q_ONOFF(drvid); //Queue data
+#endif // RGB_MATRIX_ENABLE
keyboard_setup();
diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.c b/tmk_core/protocol/arm_atsam/usb/usb2422.c
index d6e1922429..76ec3aaaa7 100644
--- a/tmk_core/protocol/arm_atsam/usb/usb2422.c
+++ b/tmk_core/protocol/arm_atsam/usb/usb2422.c
@@ -365,8 +365,10 @@ void USB_ExtraSetState(uint8_t state)
if (usb_extra_state == USB_EXTRA_STATE_ENABLED) CDC_print("USB: Extra enabled\r\n");
else if (usb_extra_state == USB_EXTRA_STATE_DISABLED)
{
- CDC_print("USB: Extra disabled\r\n");
- if (led_animation_breathing) gcr_breathe = gcr_desired;
+ CDC_print("USB: Extra disabled\r\n");
+#ifdef USE_MASSDROP_CONFIGURATOR
+ if (led_animation_breathing) gcr_breathe = gcr_desired;
+#endif
}
else if (usb_extra_state == USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG) CDC_print("USB: Extra disabled until replug\r\n");
else CDC_print("USB: Extra state unknown\r\n");