diff --git a/Bootloaders/Incomplete/MassStorage/Config/LUFAConfig.h b/Bootloaders/Incomplete/MassStorage/Config/LUFAConfig.h new file mode 100644 index 0000000000..b1ae7b5213 --- /dev/null +++ b/Bootloaders/Incomplete/MassStorage/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ + #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Bootloaders/Incomplete/MassStorage/Descriptors.c b/Bootloaders/Incomplete/MassStorage/Descriptors.c new file mode 100644 index 0000000000..0dda34ae1e --- /dev/null +++ b/Bootloaders/Incomplete/MassStorage/Descriptors.c @@ -0,0 +1,209 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + + +/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +const USB_Descriptor_Device_t DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(01.10), + .Class = USB_CSCP_NoDeviceClass, + .SubClass = USB_CSCP_NoDeviceSubclass, + .Protocol = USB_CSCP_NoDeviceProtocol, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x03EB, + .ProductID = 0x2045, + .ReleaseNumber = VERSION_BCD(00.01), + + .ManufacturerStrIndex = 0x01, + .ProductStrIndex = 0x02, + .SerialNumStrIndex = USE_INTERNAL_SERIAL, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +const USB_Descriptor_Configuration_t ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 1, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = USB_CONFIG_ATTR_RESERVED, + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + + .MS_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = 0, + .AlternateSetting = 0, + + .TotalEndpoints = 2, + + .Class = MS_CSCP_MassStorageClass, + .SubClass = MS_CSCP_SCSITransparentSubclass, + .Protocol = MS_CSCP_BulkOnlyTransportProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .MS_DataInEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = MASS_STORAGE_IN_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = MASS_STORAGE_IO_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .MS_DataOutEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = MASS_STORAGE_IO_EPSIZE, + .PollingIntervalMS = 0x05 + } +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +const USB_Descriptor_String_t LanguageString = +{ + .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, + + .UnicodeString = {LANGUAGE_ID_ENG} +}; + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t ManufacturerString = +{ + .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, + + .UnicodeString = L"Dean Camera" +}; + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t ProductString = +{ + .Header = {.Size = USB_STRING_LEN(15), .Type = DTYPE_String}, + + .UnicodeString = L"LUFA Bootloader" +}; + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + const void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = &DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = &ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + switch (DescriptorNumber) + { + case 0x00: + Address = &LanguageString; + Size = pgm_read_byte(&LanguageString.Header.Size); + break; + case 0x01: + Address = &ManufacturerString; + Size = pgm_read_byte(&ManufacturerString.Header.Size); + break; + case 0x02: + Address = &ProductString; + Size = pgm_read_byte(&ProductString.Header.Size); + break; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} + diff --git a/Bootloaders/Incomplete/MassStorage/Descriptors.h b/Bootloaders/Incomplete/MassStorage/Descriptors.h new file mode 100644 index 0000000000..7261fabfa9 --- /dev/null +++ b/Bootloaders/Incomplete/MassStorage/Descriptors.h @@ -0,0 +1,76 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include + + #include + + /* Macros: */ + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) + + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) + + /** Size in bytes of the Mass Storage data endpoints. */ + #define MASS_STORAGE_IO_EPSIZE 64 + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + + // Mass Storage Interface + USB_Descriptor_Interface_t MS_Interface; + USB_Descriptor_Endpoint_t MS_DataInEndpoint; + USB_Descriptor_Endpoint_t MS_DataOutEndpoint; + } USB_Descriptor_Configuration_t; + + /* Function Prototypes: */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + +#endif + diff --git a/Bootloaders/Incomplete/MassStorage/Lib/SCSI.c b/Bootloaders/Incomplete/MassStorage/Lib/SCSI.c new file mode 100644 index 0000000000..c6596d41a1 --- /dev/null +++ b/Bootloaders/Incomplete/MassStorage/Lib/SCSI.c @@ -0,0 +1,321 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * SCSI command processing routines, for SCSI commands issued by the host. Mass Storage + * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, + * which wrap around standard SCSI device commands for controlling the actual storage medium. + */ + +#define INCLUDE_FROM_SCSI_C +#include "SCSI.h" + +/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's + * features and capabilities. + */ +static const SCSI_Inquiry_Response_t InquiryData = + { + .DeviceType = DEVICE_TYPE_BLOCK, + .PeripheralQualifier = 0, + + .Removable = true, + + .Version = 0, + + .ResponseDataFormat = 2, + .NormACA = false, + .TrmTsk = false, + .AERC = false, + + .AdditionalLength = 0x1F, + + .SoftReset = false, + .CmdQue = false, + .Linked = false, + .Sync = false, + .WideBus16Bit = false, + .WideBus32Bit = false, + .RelAddr = false, + + .VendorID = "LUFA", + .ProductID = "Bootloader", + .RevisionID = {'0','.','0','0'}, + }; + +/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE + * command is issued. This gives information on exactly why the last command failed to complete. + */ +static SCSI_Request_Sense_Response_t SenseData = + { + .ResponseCode = 0x70, + .AdditionalLength = 0x0A, + }; + + +/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches + * to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns + * a command failure due to a ILLEGAL REQUEST. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean true if the command completed successfully, false otherwise + */ +bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + bool CommandSuccess = false; + + /* Run the appropriate SCSI command hander function based on the passed command */ + switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) + { + case SCSI_CMD_INQUIRY: + CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); + break; + case SCSI_CMD_REQUEST_SENSE: + CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); + break; + case SCSI_CMD_READ_CAPACITY_10: + CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); + break; + case SCSI_CMD_SEND_DIAGNOSTIC: + CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo); + break; + case SCSI_CMD_WRITE_10: + CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE); + break; + case SCSI_CMD_READ_10: + CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ); + break; + case SCSI_CMD_MODE_SENSE_6: + CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo); + break; + case SCSI_CMD_TEST_UNIT_READY: + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + case SCSI_CMD_VERIFY_10: + /* These commands should just succeed, no handling required */ + CommandSuccess = true; + MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; + break; + default: + /* Update the SENSE key to reflect the invalid command */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_INVALID_COMMAND, + SCSI_ASENSEQ_NO_QUALIFIER); + break; + } + + /* Check if command was successfully processed */ + if (CommandSuccess) + { + SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, + SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, + SCSI_ASENSEQ_NO_QUALIFIER); + + return true; + } + + return false; +} + +/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features + * and capabilities to the host. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean true if the command completed successfully, false otherwise. + */ +static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + uint16_t AllocationLength = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]); + uint16_t BytesTransferred = MIN(AllocationLength, sizeof(InquiryData)); + + /* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */ + if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) || + MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]) + { + /* Optional but unsupported bits set - update the SENSE key and fail the request */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_INVALID_FIELD_IN_CDB, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + + Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL); + + /* Pad out remaining bytes with 0x00 */ + Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearIN(); + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; + + return true; +} + +/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, + * including the error code and additional error information so that the host can determine why a command failed to complete. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean true if the command completed successfully, false otherwise. + */ +static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; + uint8_t BytesTransferred = MIN(AllocationLength, sizeof(SenseData)); + + Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL); + Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); + Endpoint_ClearIN(); + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; + + return true; +} + +/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity + * on the selected Logical Unit (drive), as a number of OS-sized blocks. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean true if the command completed successfully, false otherwise. + */ +static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + uint32_t LastBlockAddressInLUN = (LUN_MEDIA_BLOCKS - 1); + uint32_t MediaBlockSize = VIRTUAL_MEMORY_BLOCK_SIZE; + + Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL); + Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL); + Endpoint_ClearIN(); + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; + + return true; +} + +/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the + * board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is + * supported. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean true if the command completed successfully, false otherwise. + */ +static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + /* Check to see if the SELF TEST bit is not set */ + if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2))) + { + /* Only self-test supported - update SENSE key and fail the command */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_INVALID_FIELD_IN_CDB, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; + + return true; +} + +/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address + * and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual + * reading and writing of the data. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE) + * + * \return Boolean true if the command completed successfully, false otherwise. + */ +static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const bool IsDataRead) +{ + uint32_t BlockAddress; + uint16_t TotalBlocks; + + /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ + BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); + + /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ + TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); + + /* Check if the block address is outside the maximum allowable value for the LUN */ + if (BlockAddress >= LUN_MEDIA_BLOCKS) + { + /* Block address is invalid, update SENSE key and return command fail */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + + /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ + if (IsDataRead == DATA_READ) + VirtualFAT_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); + else + VirtualFAT_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); + + /* Update the bytes transferred counter and succeed the command */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE); + + return true; +} + +/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about + * the SCSI device, as well as the device's Write Protect status. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean true if the command completed successfully, false otherwise. + */ +static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + /* Send an empty header response with the Write Protect flag status */ + Endpoint_Write_8(0x00); + Endpoint_Write_8(0x00); + Endpoint_Write_8(0x00); + Endpoint_Write_8(0x00); + Endpoint_ClearIN(); + + /* Update the bytes transferred counter and succeed the command */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4; + + return true; +} + diff --git a/Bootloaders/Incomplete/MassStorage/Lib/SCSI.h b/Bootloaders/Incomplete/MassStorage/Lib/SCSI.h new file mode 100644 index 0000000000..bec1c962dd --- /dev/null +++ b/Bootloaders/Incomplete/MassStorage/Lib/SCSI.h @@ -0,0 +1,85 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for SCSI.c. + */ + +#ifndef _SCSI_H_ +#define _SCSI_H_ + + /* Includes: */ + #include + #include + + #include + + #include "../MassStorage.h" + #include "../Descriptors.h" + #include "VirtualFAT.h" + + /* Macros: */ + /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This + * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about + * the last command failure) in a quick and easy manner. + * + * \param[in] Key New SCSI sense key to set the sense code to + * \param[in] Acode New SCSI additional sense key to set the additional sense code to + * \param[in] Aqual New SCSI additional sense key qualifier to set the additional sense qualifier code to + */ + #define SCSI_SET_SENSE(Key, Acode, Aqual) MACROS{ SenseData.SenseKey = (Key); \ + SenseData.AdditionalSenseCode = (Acode); \ + SenseData.AdditionalSenseQualifier = (Aqual); }MACROE + + /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */ + #define DATA_READ true + + /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */ + #define DATA_WRITE false + + /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ + #define DEVICE_TYPE_BLOCK 0x00 + + /* Function Prototypes: */ + bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + + #if defined(INCLUDE_FROM_SCSI_C) + static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const bool IsDataRead); + static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + #endif + +#endif + diff --git a/Bootloaders/Incomplete/MassStorage/Lib/VirtualFAT.c b/Bootloaders/Incomplete/MassStorage/Lib/VirtualFAT.c new file mode 100644 index 0000000000..7b0c5dda52 --- /dev/null +++ b/Bootloaders/Incomplete/MassStorage/Lib/VirtualFAT.c @@ -0,0 +1,154 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "VirtualFAT.h" + +static const FATBootBlock_t BootBlock = + { + .Bootstrap = {0xEB, 0x3C, 0x90}, + .Description = "mkdosfs", + .BlockSize = VIRTUAL_MEMORY_BLOCK_SIZE, + .BlocksPerAllocationUnit = ALLOCATION_UNIT_BLOCKS, + .ReservedBlocks = 1, + .FATCopies = 2, + .RootDirectoryEntries = 512, + .TotalBlocks16 = LUN_MEDIA_BLOCKS, + .MediaDescriptor = 0xF8, + .BlocksPerFAT = 1, + .BlocksPerTrack = 32, + .Heads = 64, + .HiddenBlocks = 0, + .TotalBlocks32 = 0, + .PhysicalDriveNum = 0, + .ExtendedBootRecordSig = 0x29, + .VolumeSerialNumber = 0x12345678, + .VolumeLabel = "LUFA BOOT ", + .FilesystemIdentifier = "FAT16 ", + .BootstrapProgram = {0}, + .MagicSignature = 0xAA55, + }; + +static FATDirectoryEntry_t FirmwareFileEntry = + { + .Filename = "Firmware", + .Extension = "bin", + .Attributes = 0, + .Reserved = {0}, + .CreationTime = (1 << 11) | (1 << 5), + .CreationDate = (9 << 9) | (2 << 5) | (14 << 0), + .StartingCluster = 4, + .FileSize = (FLASHEND + 1UL), + }; + +static void WriteBlock(uint16_t BlockNumber) +{ + uint8_t BlockBuffer[512]; + + /* Wait until endpoint is ready before continuing */ + if (Endpoint_WaitUntilReady()) + return; + + Endpoint_Read_Stream_LE(BlockBuffer, sizeof(BlockBuffer), NULL); + Endpoint_ClearOUT(); + + // TODO: Write to FLASH +} + +static void ReadBlock(uint16_t BlockNumber) +{ + uint8_t BlockBuffer[512]; + memset(BlockBuffer, 0x00, sizeof(BlockBuffer)); + + switch (BlockNumber) + { + case 0: + memcpy(BlockBuffer, &BootBlock, sizeof(FATBootBlock_t)); + break; + + case 1: + case 2: + /* Cluster 0: Media type/Reserved */ + ((uint16_t*)&BlockBuffer)[0] = 0xFF00 | BootBlock.MediaDescriptor; + + /* Cluster 1: Reserved */ + ((uint16_t*)&BlockBuffer)[1] = 0xFFFF; + + /* Cluster 2: Reserved */ + ((uint16_t*)&BlockBuffer)[2] = 0xFFFF; + + /* Cluster 3: FIRMWARE.BIN File Entry */ + ((uint16_t*)&BlockBuffer)[3] = 0xFFFF; + + /* Cluster 4 onwards: Cluster chain of FIRMWARE.BIN */ + for (uint16_t i = 0; i < ((FLASHEND + 1) / (VIRTUAL_MEMORY_BLOCK_SIZE * ALLOCATION_UNIT_BLOCKS)); i++) + { + ((uint16_t*)&BlockBuffer)[i + 4] = i + 5; + } + + /* Mark last cluster as end of file */ + ((uint16_t*)&BlockBuffer)[((FLASHEND + 1) / (VIRTUAL_MEMORY_BLOCK_SIZE * ALLOCATION_UNIT_BLOCKS)) + 4] = 0xFFFF; + break; + + case 3: + memcpy(BlockBuffer, &FirmwareFileEntry, sizeof(FATDirectoryEntry_t)); + break; + + default: + break; + } + + /* Wait until endpoint is ready before continuing */ + if (Endpoint_WaitUntilReady()) + return; + + Endpoint_Write_Stream_LE(BlockBuffer, sizeof(BlockBuffer), NULL); + Endpoint_ClearIN(); +} + +void VirtualFAT_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const uint32_t BlockAddress, + uint16_t TotalBlocks) +{ + uint16_t CurrentBlock = (uint16_t)BlockAddress; + + while (TotalBlocks--) + WriteBlock(CurrentBlock++); +} + +void VirtualFAT_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const uint32_t BlockAddress, + uint16_t TotalBlocks) +{ + uint16_t CurrentBlock = (uint16_t)BlockAddress; + + while (TotalBlocks--) + ReadBlock(CurrentBlock++); +} + diff --git a/Bootloaders/Incomplete/MassStorage/Lib/VirtualFAT.h b/Bootloaders/Incomplete/MassStorage/Lib/VirtualFAT.h new file mode 100644 index 0000000000..2009b68473 --- /dev/null +++ b/Bootloaders/Incomplete/MassStorage/Lib/VirtualFAT.h @@ -0,0 +1,91 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#ifndef _VIRTUALFAT_H_ +#define _VIRTUALFAT_H_ + + /* Includes: */ + #include + #include + + #include + + /* Macros: */ + #define VIRTUAL_MEMORY_BLOCK_SIZE 512 + #define ALLOCATION_UNIT_BLOCKS 4 + #define LUN_MEDIA_BLOCKS ((FLASHEND + 1) / VIRTUAL_MEMORY_BLOCK_SIZE) + 16 + + /* Type Definitions: */ + typedef struct + { + uint8_t Bootstrap[3]; + uint8_t Description[8]; + uint16_t BlockSize; + uint8_t BlocksPerAllocationUnit; + uint16_t ReservedBlocks; + uint8_t FATCopies; + uint16_t RootDirectoryEntries; + uint16_t TotalBlocks16; + uint8_t MediaDescriptor; + uint16_t BlocksPerFAT; + uint16_t BlocksPerTrack; + uint16_t Heads; + uint32_t HiddenBlocks; + uint32_t TotalBlocks32; + uint16_t PhysicalDriveNum; + uint8_t ExtendedBootRecordSig; + uint32_t VolumeSerialNumber; + uint8_t VolumeLabel[11]; + uint8_t FilesystemIdentifier[8]; + uint8_t BootstrapProgram[448]; + uint16_t MagicSignature; + } FATBootBlock_t; + + typedef struct + { + uint8_t Filename[8]; + uint8_t Extension[3]; + uint8_t Attributes; + uint8_t Reserved[10]; + uint16_t CreationTime; + uint16_t CreationDate; + uint16_t StartingCluster; + uint32_t FileSize; + } FATDirectoryEntry_t; + + /* Function Prototypes: */ + void VirtualFAT_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const uint32_t BlockAddress, + uint16_t TotalBlocks); + + void VirtualFAT_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const uint32_t BlockAddress, + uint16_t TotalBlocks); +#endif diff --git a/Bootloaders/Incomplete/MassStorage/MassStorage.c b/Bootloaders/Incomplete/MassStorage/MassStorage.c new file mode 100644 index 0000000000..2d4d973763 --- /dev/null +++ b/Bootloaders/Incomplete/MassStorage/MassStorage.c @@ -0,0 +1,143 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the MassStorage demo. This file contains the main tasks of + * the demo and is responsible for the initial application hardware configuration. + */ + +#include "MassStorage.h" + +/** LUFA Mass Storage Class driver interface configuration and state information. This structure is + * passed to all Mass Storage Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. + */ +USB_ClassInfo_MS_Device_t Disk_MS_Interface = + { + .Config = + { + .InterfaceNumber = 0, + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .TotalLUNs = 1, + }, + }; + + +/** Main program entry point. This routine contains the overall program flow, including initial + * setup of all components and the main program loop. + */ +int main(void) +{ + SetupHardware(); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + GlobalInterruptEnable(); + + for (;;) + { + MS_Device_USBTask(&Disk_MS_Interface); + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + /* Relocate the interrupt vector table to the bootloader section */ + MCUCR = (1 << IVCE); + MCUCR = (1 << IVSEL); + + /* Hardware Initialization */ + LEDs_Init(); + USB_Init(); +} + +/** Event handler for the library USB Connection event. */ +void EVENT_USB_Device_Connect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the library USB Disconnection event. */ +void EVENT_USB_Device_Disconnect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the library USB Configuration Changed event. */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + bool ConfigSuccess = true; + + ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface); + + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); +} + +/** Event handler for the library USB Control Request reception event. */ +void EVENT_USB_Device_ControlRequest(void) +{ + MS_Device_ProcessControlRequest(&Disk_MS_Interface); +} + +/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface configuration structure being referenced + */ +bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + bool CommandSuccess; + + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); + CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo); + LEDs_SetAllLEDs(LEDMASK_USB_READY); + + return CommandSuccess; +} + diff --git a/Bootloaders/Incomplete/MassStorage/MassStorage.h b/Bootloaders/Incomplete/MassStorage/MassStorage.h new file mode 100644 index 0000000000..a6ad9b2678 --- /dev/null +++ b/Bootloaders/Incomplete/MassStorage/MassStorage.h @@ -0,0 +1,80 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2013. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for MassStorage.c. + */ + +#ifndef _MASS_STORAGE_H_ +#define _MASS_STORAGE_H_ + + /* Includes: */ + #include + #include + #include + #include + #include + + #include "Descriptors.h" + + #include "Lib/SCSI.h" + + #include + #include + + /* Macros: */ + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ + #define LEDMASK_USB_NOTREADY LEDS_LED1 + + /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ + #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) + + /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ + #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) + + /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ + #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) + + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ + #define LEDMASK_USB_BUSY LEDS_LED2 + + /* Function Prototypes: */ + void SetupHardware(void); + + void EVENT_USB_Device_Connect(void); + void EVENT_USB_Device_Disconnect(void); + void EVENT_USB_Device_ConfigurationChanged(void); + void EVENT_USB_Device_ControlRequest(void); + + bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); + +#endif + diff --git a/Bootloaders/Incomplete/MassStorage/makefile b/Bootloaders/Incomplete/MassStorage/makefile new file mode 100644 index 0000000000..566c47d3b6 --- /dev/null +++ b/Bootloaders/Incomplete/MassStorage/makefile @@ -0,0 +1,48 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2013. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +# Run "make help" for target help. + +MCU = at90usb1287 +ARCH = AVR8 +BOARD = USBKEY +F_CPU = 8000000 +F_USB = $(F_CPU) +OPTIMIZATION = s +TARGET = MassStorage +SRC = $(TARGET).c Descriptors.c Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) +LUFA_PATH = ../../../LUFA +CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ +LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) + +# Flash size and bootloader section sizes of the target, in KB. These must +# match the target's total FLASH size and the bootloader size set in the +# device's fuses. +FLASH_SIZE_KB := 128 +BOOT_SECTION_SIZE_KB := 8 + +# Bootloader address calculation formulas +# Do not modify these macros, but rather modify the dependent values above. +CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) ) +BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 ) +BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - $(strip $(1)) ) + +# Default target +all: + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_core.mk +include $(LUFA_PATH)/Build/lufa_sources.mk +include $(LUFA_PATH)/Build/lufa_build.mk +include $(LUFA_PATH)/Build/lufa_cppcheck.mk +include $(LUFA_PATH)/Build/lufa_doxygen.mk +include $(LUFA_PATH)/Build/lufa_avrdude.mk +include $(LUFA_PATH)/Build/lufa_atprogram.mk