forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add beginnings of a RNDIS Ethernet Host demo.

Browse Source
pull/1469/head
Dean Camera 15 years ago
parent 04774208b6
commit 6a46f0025a
14 changed files with 1837 additions and 28 deletions
Show Stats Download Patch File Download Diff File

245
Demos/Host/Incomplete/RNDISEthernetHost/ConfigDescriptor.c
Unescape View File

@ -0,0 +1,245 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
* needed to communication with an attached USB device. Descriptors are special computer-readable structures
* which the host requests upon device enumeration, to determine the device's capabilities and functions.
*/
#include "ConfigDescriptor.h"
/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
* routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
* with compatible devices.
*
* This routine searches for a CDC interface descriptor containing bulk data IN and OUT endpoints, and an interrupt event endpoint.
*
* \return An error code from the \ref CDCHost_GetConfigDescriptorDataCodes_t enum.
*/
uint8_t ProcessConfigurationDescriptor(void)
{
uint8_t ConfigDescriptorData[512];
void* CurrConfigLocation = ConfigDescriptorData;
uint16_t CurrConfigBytesRem;
uint8_t FoundEndpoints = 0;
/* Retrieve the entire configuration descriptor into the allocated buffer */
switch (USB_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
{
case HOST_GETCONFIG_Successful:
break;
case HOST_GETCONFIG_InvalidData:
return InvalidConfigDataReturned;
case HOST_GETCONFIG_BuffOverflow:
return DescriptorTooLarge;
default:
return ControlError;
}
/* Get the CDC control interface from the configuration descriptor */
if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
DComp_NextCDCControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
{
/* Descriptor not found, error out */
return NoRNDISInterfaceFound;
}
/* Get the IN and OUT data and IN notification endpoints for the RNDIS interface */
while (FoundEndpoints != ((1 << RNDIS_NOTIFICATIONPIPE) | (1 << RNDIS_DATAPIPE_IN) | (1 << RNDIS_DATAPIPE_OUT)))
{
/* Fetch the next bulk or interrupt endpoint from the current RNDIS interface */
if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
DComp_NextCDCDataInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
{
/* Check to see if the control interface's notification pipe has been found, if so search for the data interface */
if (FoundEndpoints & (1 << RNDIS_NOTIFICATIONPIPE))
{
/* Get the next CDC data interface from the configuration descriptor (RNDIS class has two CDC interfaces) */
if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
DComp_NextCDCDataInterface) != DESCRIPTOR_SEARCH_COMP_Found)
{
/* Descriptor not found, error out */
return NoRNDISInterfaceFound;
}
}
else
{
/* Clear the found endpoints mask, since any already processed endpoints aren't in the CDC interface we need */
FoundEndpoints = 0;
/* Disable any already configured pipes from the invalid RNDIS interfaces */
Pipe_SelectPipe(RNDIS_NOTIFICATIONPIPE);
Pipe_DisablePipe();
Pipe_SelectPipe(RNDIS_DATAPIPE_IN);
Pipe_DisablePipe();
Pipe_SelectPipe(RNDIS_DATAPIPE_OUT);
Pipe_DisablePipe();
/* Get the next CDC control interface from the configuration descriptor (CDC class has two CDC interfaces) */
if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
DComp_NextCDCControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
{
/* Descriptor not found, error out */
return NoRNDISInterfaceFound;
}
}
/* Fetch the next bulk or interrupt endpoint from the current CDC interface */
if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
DComp_NextCDCDataInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
{
/* Descriptor not found, error out */
return NoEndpointFound;
}
}
USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
/* Check if the found endpoint is a interrupt or bulk type descriptor */
if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
{
/* If the endpoint is a IN type interrupt endpoint */
if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
{
/* Configure the notification pipe */
Pipe_ConfigurePipe(RNDIS_NOTIFICATIONPIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
EndpointData->EndpointAddress, EndpointData->EndpointSize, PIPE_BANK_SINGLE);
Pipe_SetInterruptPeriod(EndpointData->PollingIntervalMS);
/* Set the flag indicating that the notification pipe has been found */
FoundEndpoints |= (1 << RNDIS_NOTIFICATIONPIPE);
}
}
else
{
/* Check if the endpoint is a bulk IN or bulk OUT endpoint */
if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
{
/* Configure the data IN pipe */
Pipe_ConfigurePipe(RNDIS_DATAPIPE_IN, EP_TYPE_BULK, PIPE_TOKEN_IN,
EndpointData->EndpointAddress, EndpointData->EndpointSize, PIPE_BANK_SINGLE);
/* Set the flag indicating that the data IN pipe has been found */
FoundEndpoints |= (1 << RNDIS_DATAPIPE_IN);
}
else
{
/* Configure the data OUT pipe */
Pipe_ConfigurePipe(RNDIS_DATAPIPE_OUT, EP_TYPE_BULK, PIPE_TOKEN_OUT,
EndpointData->EndpointAddress, EndpointData->EndpointSize, PIPE_BANK_SINGLE);
/* Set the flag indicating that the data OUT pipe has been found */
FoundEndpoints |= (1 << RNDIS_DATAPIPE_OUT);
}
}
}
/* Valid data found, return success */
return SuccessfulConfigRead;
}
/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
* configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
* descriptor processing if an incompatible descriptor configuration is found.
*
* This comparator searches for the next Interface descriptor of the correct CDC control Class, Subclass and Protocol values.
*
* \return A value from the DSEARCH_Return_ErrorCodes_t enum
*/
uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor)
{
if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
{
/* Check the CDC descriptor class, subclass and protocol, break out if correct control interface found */
if ((DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Class == CDC_CONTROL_CLASS) &&
(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).SubClass == CDC_CONTROL_SUBCLASS) &&
(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Protocol == CDC_CONTROL_PROTOCOL))
{
return DESCRIPTOR_SEARCH_Found;
}
}
return DESCRIPTOR_SEARCH_NotFound;
}
/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
* configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
* descriptor processing if an incompatible descriptor configuration is found.
*
* This comparator searches for the next Interface descriptor of the correct CDC data Class, Subclass and Protocol values.
*
* \return A value from the DSEARCH_Return_ErrorCodes_t enum
*/
uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor)
{
if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
{
/* Check the CDC descriptor class, subclass and protocol, break out if correct data interface found */
if ((DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Class == CDC_DATA_CLASS) &&
(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).SubClass == CDC_DATA_SUBCLASS) &&
(DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Protocol == CDC_DATA_PROTOCOL))
{
return DESCRIPTOR_SEARCH_Found;
}
}
return DESCRIPTOR_SEARCH_NotFound;
}
/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
* configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
* descriptor processing if an incompatible descriptor configuration is found.
*
* This comparator searches for the next bulk IN or OUT endpoint, or interrupt IN endpoint within the current interface,
* aborting the search if another interface descriptor is found before the required endpoint (so that it may be compared
* using a different comparator to determine if it is another CDC class interface).
*
* \return A value from the DSEARCH_Return_ErrorCodes_t enum
*/
uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor)
{
if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint)
{
uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor,
USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK);
if ((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT))
return DESCRIPTOR_SEARCH_Found;
}
else if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
{
return DESCRIPTOR_SEARCH_Fail;
}
return DESCRIPTOR_SEARCH_NotFound;
}

85
Demos/Host/Incomplete/RNDISEthernetHost/ConfigDescriptor.h
Unescape View File

@ -0,0 +1,85 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for ConfigDescriptor.c.
*/
#ifndef _CONFIGDESCRIPTOR_H_
#define _CONFIGDESCRIPTOR_H_
/* Includes: */
#include <LUFA/Drivers/USB/USB.h> // USB Functionality
#include "RNDISEthernetHost.h"
/* Macros: */
/** Interface Class value for the CDC class */
#define CDC_CONTROL_CLASS 0x02
/** Interface Class value for the CDC Communication Interface subclass */
#define CDC_CONTROL_SUBCLASS 0x02
/** Interface Class value for the CDC RNDIS vendor specific protocol */
#define CDC_CONTROL_PROTOCOL 0xFF
/** Interface Class value for the CDC data class */
#define CDC_DATA_CLASS 0x0A
/** Interface Class value for the CDC data subclass */
#define CDC_DATA_SUBCLASS 0x00
/** Interface Class value for the CDC data protocol */
#define CDC_DATA_PROTOCOL 0x00
/** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
#define MAX_CONFIG_DESCRIPTOR_SIZE 512
/* Enums: */
/** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
enum RNDISHost_GetConfigDescriptorDataCodes_t
{
SuccessfulConfigRead = 0, /**< Configuration Descriptor was processed successfully */
ControlError = 1, /**< A control request to the device failed to complete successfully */
DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */
InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */
NoRNDISInterfaceFound = 4, /**< A compatible RNDIS interface was not found in the device's Configuration Descriptor */
NoEndpointFound = 5, /**< Compatible RNDIS endpoints were not found in the device's RNDIS interface */
};
/* Function Prototypes: */
uint8_t ProcessConfigurationDescriptor(void);
uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor);
uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor);
uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor);
#endif

149
Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISCommands.c
Unescape View File

@ -0,0 +1,149 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* RNDOS Device commands, to issue RNDIS commands to the device for
* the control and data transfer between the host and RNDIS device.
*/
#include "RNDISCommands.h"
uint32_t RequestID = 0;
uint8_t RNDIS_SendEncapsulatedCommand(void* Buffer, uint16_t Length)
{
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_SendEncapsulatedCommand,
.wValue = 0,
.wIndex = 0,
.wLength = Length,
};
printf("==== RNDIS CONTROL REQUEST ====\r\n");
uint8_t* Data = Buffer;
for (uint16_t i = 0; i < Length / 8; i++)
{
for (uint16_t j = 0; (j < 8) && i*8+j < Length; j++)
printf("%02X ", *(Data++));
printf("\r\n");
}
printf("==== ********************* ====\r\n");
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(Buffer);
}
uint8_t RNDIS_GetEncapsulatedResponse(void* Buffer, uint16_t Length)
{
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
.bRequest = REQ_GetEncapsulatedResponse,
.wValue = 0,
.wIndex = 0,
.wLength = Length,
};
/* Select the control pipe for the request transfer */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(Buffer);
}
uint8_t RNDIS_InitializeDevice(uint16_t MaxPacketSize, RNDIS_Initialize_Complete_t* InitMessageResponse)
{
uint8_t ErrorCode;
RNDIS_Initialize_Message_t InitMessage;
InitMessage.MessageType = REMOTE_NDIS_INITIALIZE_MSG;
InitMessage.MessageLength = sizeof(RNDIS_Initialize_Message_t);
InitMessage.RequestId = RequestID++;
InitMessage.MajorVersion = REMOTE_NDIS_VERSION_MAJOR;
InitMessage.MinorVersion = REMOTE_NDIS_VERSION_MINOR;
InitMessage.MaxTransferSize = sizeof(RNDIS_Packet_Message_t) + MaxPacketSize;
if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&InitMessage,
sizeof(RNDIS_Initialize_Message_t))) != HOST_SENDCONTROL_Successful)
{
return ErrorCode;
}
if ((ErrorCode = RNDIS_GetEncapsulatedResponse(InitMessageResponse,
sizeof(RNDIS_Initialize_Complete_t))) != HOST_SENDCONTROL_Successful)
{
return ErrorCode;
}
return HOST_SENDCONTROL_Successful;
}
uint8_t RNDIS_SetRNDISProperty(uint32_t Oid, void* Buffer, uint16_t Length)
{
uint8_t ErrorCode;
struct
{
RNDIS_Set_Message_t SetMessage;
uint8_t ContigiousBuffer[Length];
} SetMessageData;
RNDIS_Set_Complete_t SetMessageResponse;
SetMessageData.SetMessage.MessageType = REMOTE_NDIS_SET_MSG;
SetMessageData.SetMessage.MessageLength = sizeof(RNDIS_Set_Message_t) + Length;
SetMessageData.SetMessage.RequestId = RequestID++;
SetMessageData.SetMessage.Oid = Oid;
SetMessageData.SetMessage.InformationBufferLength = Length;
SetMessageData.SetMessage.InformationBufferOffset = 0;
SetMessageData.SetMessage.DeviceVcHandle = 0;
if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&SetMessageData,
SetMessageData.SetMessage.MessageLength)) != HOST_SENDCONTROL_Successful)
{
return ErrorCode;
}
if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&SetMessageResponse,
sizeof(RNDIS_Set_Complete_t))) != HOST_SENDCONTROL_Successful)
{
return ErrorCode;
}
return HOST_SENDCONTROL_Successful;
}

205
Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISCommands.h
Unescape View File

@ -0,0 +1,205 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for RNDISCommands.c.
*/
#ifndef _RNDIS_COMMANDS_H_
#define _RNDIS_COMMANDS_H_
/* Includes: */
#include <avr/io.h>
#include <stdio.h>
#include <LUFA/Drivers/USB/USB.h>
#include "RNDISConstants.h"
/* Type Defines: */
/** Type define for a RNDIS message header, sent before RNDIS messages */
typedef struct
{
uint32_t MessageType; /**< RNDIS message type, a REMOTE_NDIS_*_MSG constant */
uint32_t MessageLength; /**< Total length of the RNDIS message, in bytes */
} RNDIS_Message_Header_t;
/** Type define for a RNDIS packet message, used to encapsulate Ethernet packets sent to and from the adapter */
typedef struct
{
uint32_t MessageType;
uint32_t MessageLength;
uint32_t DataOffset;
uint32_t DataLength;
uint32_t OOBDataOffset;
uint32_t OOBDataLength;
uint32_t NumOOBDataElements;
uint32_t PerPacketInfoOffset;
uint32_t PerPacketInfoLength;
uint32_t VcHandle;
uint32_t Reserved;
} RNDIS_Packet_Message_t;
/** Type define for a RNDIS Initialize command message */
typedef struct
{
uint32_t MessageType;
uint32_t MessageLength;
uint32_t RequestId;
uint32_t MajorVersion;
uint32_t MinorVersion;
uint32_t MaxTransferSize;
} RNDIS_Initialize_Message_t;
/** Type define for a RNDIS Initialize complete response message */
typedef struct
{
uint32_t MessageType;
uint32_t MessageLength;
uint32_t RequestId;
uint32_t Status;
uint32_t MajorVersion;
uint32_t MinorVersion;
uint32_t DeviceFlags;
uint32_t Medium;
uint32_t MaxPacketsPerTransfer;
uint32_t MaxTransferSize;
uint32_t PacketAlignmentFactor;
uint32_t AFListOffset;
uint32_t AFListSize;
} RNDIS_Initialize_Complete_t;
/** Type define for a RNDIS Keepalive command message */
typedef struct
{
uint32_t MessageType;
uint32_t MessageLength;
uint32_t RequestId;
} RNDIS_KeepAlive_Message_t;
/** Type define for a RNDIS Keepalive complete message */
typedef struct
{
uint32_t MessageType;
uint32_t MessageLength;
uint32_t RequestId;
uint32_t Status;
} RNDIS_KeepAlive_Complete_t;
/** Type define for a RNDIS Reset complete message */
typedef struct
{
uint32_t MessageType;
uint32_t MessageLength;
uint32_t Status;
uint32_t AddressingReset;
} RNDIS_Reset_Complete_t;
/** Type define for a RNDIS Set command message */
typedef struct
{
uint32_t MessageType;
uint32_t MessageLength;
uint32_t RequestId;
uint32_t Oid;
uint32_t InformationBufferLength;
uint32_t InformationBufferOffset;
uint32_t DeviceVcHandle;
} RNDIS_Set_Message_t;
/** Type define for a RNDIS Set complete response message */
typedef struct
{
uint32_t MessageType;
uint32_t MessageLength;
uint32_t RequestId;
uint32_t Status;
} RNDIS_Set_Complete_t;
/** Type define for a RNDIS Query command message */
typedef struct
{
uint32_t MessageType;
uint32_t MessageLength;
uint32_t RequestId;
uint32_t Oid;
uint32_t InformationBufferLength;
uint32_t InformationBufferOffset;
uint32_t DeviceVcHandle;
} RNDIS_Query_Message_t;
/** Type define for a RNDIS Query complete response message */
typedef struct
{
uint32_t MessageType;
uint32_t MessageLength;
uint32_t RequestId;
uint32_t Status;
uint32_t InformationBufferLength;
uint32_t InformationBufferOffset;
} RNDIS_Query_Complete_t;
/* Macros: */
/** RNDIS request to issue a host-to-device NDIS command */
#define REQ_SendEncapsulatedCommand 0x00
/** RNDIS request to issue a device-to-host NDIS response */
#define REQ_GetEncapsulatedResponse 0x01
/** Implemented RNDIS Version Major */
#define REMOTE_NDIS_VERSION_MAJOR 0x01
/** Implemented RNDIS Version Minor */
#define REMOTE_NDIS_VERSION_MINOR 0x00
/** Pipe number for the RNDIS data IN pipe */
#define RNDIS_DATAPIPE_IN 1
/** Pipe number for the RNDIS data OUT pipe */
#define RNDIS_DATAPIPE_OUT 2
/** Pipe number for the RNDIS notification pipe */
#define RNDIS_NOTIFICATIONPIPE 3
/* Function Prototypes: */
uint8_t RNDIS_SendEncapsulatedCommand(void* Buffer, uint16_t Length);
uint8_t RNDIS_GetEncapsulatedResponse(void* Buffer, uint16_t Length);
uint8_t RNDIS_InitializeDevice(uint16_t MaxPacketSize, RNDIS_Initialize_Complete_t* InitMessageResponse);
uint8_t RNDIS_SetRNDISProperty(uint32_t Oid, void* Buffer, uint16_t Length);
#endif

99
Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISConstants.h
Unescape View File

@ -0,0 +1,99 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* RNDIS specification related constants. For more information on these
* constants, please refer to the Microsoft RNDIS specification.
*/
#ifndef _RNDIS_CONSTANTS_H_
#define _RNDIS_CONSTANTS_H_
/* Macros: */
#define REMOTE_NDIS_PACKET_MSG 0x00000001UL
#define REMOTE_NDIS_INITIALIZE_MSG 0x00000002UL
#define REMOTE_NDIS_HALT_MSG 0x00000003UL
#define REMOTE_NDIS_QUERY_MSG 0x00000004UL
#define REMOTE_NDIS_SET_MSG 0x00000005UL
#define REMOTE_NDIS_RESET_MSG 0x00000006UL
#define REMOTE_NDIS_INDICATE_STATUS_MSG 0x00000007UL
#define REMOTE_NDIS_KEEPALIVE_MSG 0x00000008UL
#define REMOTE_NDIS_INITIALIZE_CMPLT 0x80000002UL
#define REMOTE_NDIS_QUERY_CMPLT 0x80000004UL
#define REMOTE_NDIS_SET_CMPLT 0x80000005UL
#define REMOTE_NDIS_RESET_CMPLT 0x80000006UL
#define REMOTE_NDIS_KEEPALIVE_CMPLT 0x80000008UL
#define REMOTE_NDIS_STATUS_SUCCESS 0x00000000UL
#define REMOTE_NDIS_STATUS_FAILURE 0xC0000001UL
#define REMOTE_NDIS_STATUS_INVALID_DATA 0xC0010015UL
#define REMOTE_NDIS_STATUS_NOT_SUPPORTED 0xC00000BBUL
#define REMOTE_NDIS_STATUS_MEDIA_CONNECT 0x4001000BUL
#define REMOTE_NDIS_STATUS_MEDIA_DISCONNECT 0x4001000CUL
#define REMOTE_NDIS_MEDIA_STATE_CONNECTED 0x00000000UL
#define REMOTE_NDIS_MEDIA_STATE_DISCONNECTED 0x00000001UL
#define REMOTE_NDIS_MEDIUM_802_3 0x00000000UL
#define REMOTE_NDIS_DF_CONNECTIONLESS 0x00000001UL
#define REMOTE_NDIS_DF_CONNECTION_ORIENTED 0x00000002UL
#define OID_GEN_SUPPORTED_LIST 0x00010101UL
#define OID_GEN_HARDWARE_STATUS 0x00010102UL
#define OID_GEN_MEDIA_SUPPORTED 0x00010103UL
#define OID_GEN_MEDIA_IN_USE 0x00010104UL
#define OID_GEN_MAXIMUM_FRAME_SIZE 0x00010106UL
#define OID_GEN_MAXIMUM_TOTAL_SIZE 0x00010111UL
#define OID_GEN_LINK_SPEED 0x00010107UL
#define OID_GEN_TRANSMIT_BLOCK_SIZE 0x0001010AUL
#define OID_GEN_RECEIVE_BLOCK_SIZE 0x0001010BUL
#define OID_GEN_VENDOR_ID 0x0001010CUL
#define OID_GEN_VENDOR_DESCRIPTION 0x0001010DUL
#define OID_GEN_CURRENT_PACKET_FILTER 0x0001010EUL
#define OID_GEN_MAXIMUM_TOTAL_SIZE 0x00010111UL
#define OID_GEN_MEDIA_CONNECT_STATUS 0x00010114UL
#define OID_GEN_PHYSICAL_MEDIUM 0x00010202UL
#define OID_GEN_XMIT_OK 0x00020101UL
#define OID_GEN_RCV_OK 0x00020102UL
#define OID_GEN_XMIT_ERROR 0x00020103UL
#define OID_GEN_RCV_ERROR 0x00020104UL
#define OID_GEN_RCV_NO_BUFFER 0x00020105UL
#define OID_802_3_PERMANENT_ADDRESS 0x01010101UL
#define OID_802_3_CURRENT_ADDRESS 0x01010102UL
#define OID_802_3_MULTICAST_LIST 0x01010103UL
#define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104UL
#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101UL
#define OID_802_3_XMIT_ONE_COLLISION 0x01020102UL
#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103UL
#endif

207
Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c
Unescape View File

@ -0,0 +1,207 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Main source file for the RNDISEthernetHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
#include "RNDISEthernetHost.h"
/** Main program entry point. This routine configures the hardware required by the application, then
* enters a loop to run the application tasks in sequence.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_FG_CYAN "RNDIS Host Demo running.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
for (;;)
{
RNDIS_Host_Task();
USB_USBTask();
}
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
SerialStream_Init(9600, false);
LEDs_Init();
USB_Init();
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
* starts the library USB task to begin the enumeration and USB management process.
*/
void EVENT_USB_Host_DeviceAttached(void)
{
puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
* stops the library USB task management process.
*/
void EVENT_USB_Host_DeviceUnattached(void)
{
puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
{
USB_ShutDown();
printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
" -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
for(;;);
}
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
{
printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
" -- Error Code %d\r\n"
" -- Sub Error Code %d\r\n"
" -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
/** Task to set the configuration of the attached device after it has been enumerated, and to read in
* data received from the attached RNDIS device and print it to the serial port.
*/
void RNDIS_Host_Task(void)
{
uint8_t ErrorCode;
switch (USB_HostState)
{
case HOST_STATE_Addressed:
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
RNDIS_Initialize_Complete_t InitMessageResponse;
if ((ErrorCode = RNDIS_InitializeDevice(1024, &InitMessageResponse)) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Error Initializing Device.\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
printf_P(PSTR("Device Max Transfer Size: %lu bytes.\r\n"), InitMessageResponse.MaxTransferSize);
uint32_t PacketFilter = 0xFFFFFFFF;
if ((ErrorCode = RNDIS_SetRNDISProperty(OID_GEN_CURRENT_PACKET_FILTER,
&PacketFilter, sizeof(PacketFilter))) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Error Setting Device Packet Filter.\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
puts_P(PSTR("RNDIS Device Enumerated.\r\n"));
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
break;
}
}

79
Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.h
Unescape View File

@ -0,0 +1,79 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2009.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appear in all
copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for RNDISEthernetHost.c.
*/
#ifndef _RNDIS_HOST_H_
#define _RNDIS_HOST_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/pgmspace.h>
#include <avr/power.h>
#include <stdio.h>
#include <LUFA/Version.h>
#include <LUFA/Drivers/Misc/TerminalCodes.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/SerialStream.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include "Lib/RNDISCommands.h"
#include "ConfigDescriptor.h"
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/* Function Prototypes: */
void SetupHardware(void);
void RNDIS_Host_Task(void);
void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
void EVENT_USB_Host_DeviceAttached(void);
void EVENT_USB_Host_DeviceUnattached(void);
void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
void EVENT_USB_Host_DeviceEnumerationComplete(void);
#endif

737
Demos/Host/Incomplete/RNDISEthernetHost/makefile
Unescape View File

@ -0,0 +1,737 @@
# Hey Emacs, this is a -*- makefile -*-
#----------------------------------------------------------------------------
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
# >> Modified for use with the LUFA project. <<
#
# Released to the Public Domain
#
# Additional material for this makefile was written by:
# Peter Fleury
# Tim Henigan
# Colin O'Flynn
# Reiner Patommel
# Markus Pfaff
# Sander Pool
# Frederik Rouleau
# Carlos Lamas
# Dean Camera
# Opendous Inc.
# Denver Gingerich
#
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device, using avrdude.
# Please customize the avrdude settings below first!
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
MCU = at90usb1287
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_CLOCK below, as it is sourced by
# F_CLOCK after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_CLOCK = $(F_CPU)
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
# Target file name (without extension).
TARGET = RNDISEthernetHost
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
OBJDIR = .
# Path to the LUFA library
LUFA_PATH = ../../../..
# LUFA library compile-time options
LUFA_OPTS = -D USB_HOST_ONLY
LUFA_OPTS += -D NO_STREAM_CALLBACKS
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
ConfigDescriptor.c \
Lib/RNDISCommands.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
$(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
# Debugging format.
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
# AVR Studio 4.10 requires dwarf-2.
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# c89 = "ANSI" C
# gnu89 = c89 plus GCC extensions
# c99 = ISO C99 standard (not yet fully implemented)
# gnu99 = c99 plus GCC extensions
CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
#---------------- Compiler Options C ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
CFLAGS += -fno-inline-small-functions
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
CFLAGS += -Wundef
#CFLAGS += -fno-unit-at-a-time
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#---------------- Compiler Options C++ ----------------
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
CPPFLAGS = -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
CPPFLAGS += -funsigned-char
CPPFLAGS += -funsigned-bitfields
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
CFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
#CPPFLAGS += -Wunreachable-code
#CPPFLAGS += -Wsign-compare
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
#---------------- Assembler Options ----------------
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns: create listing
# -gstabs: have the assembler create line number information; note that
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
# List any extra directories to look for libraries here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
EXTRALIBDIRS =
#---------------- External Memory Options ----------------
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
EXTMEMOPTS =
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x
#---------------- Programming Options (avrdude) ----------------
# Programming hardware: alf avr910 avrisp bascom bsd
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = jtagmkII
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
#---------------- Debugging Options ----------------
# For simulavr only - target MCU frequency.
DEBUG_MFREQ = $(F_CPU)
# Set the DEBUG_UI to either gdb or insight.
# DEBUG_UI = gdb
DEBUG_UI = insight
# Set the debugging back-end to either avarice, simulavr.
DEBUG_BACKEND = avarice
#DEBUG_BACKEND = simulavr
# GDB Init Filename.
GDBINIT_FILE = __avr_gdbinit
# When using avarice settings for the JTAG
JTAG_DEV = /dev/com1
# Debugging port used to communicate between GDB / avarice / simulavr.
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
#============================================================================
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
AR = avr-ar rcs
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
REMOVEDIR = rm -rf
COPY = cp
WINSHELL = cmd
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling C:
MSG_COMPILING_CPP = Compiling C++:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target.
all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
#build: lib
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss
sym: $(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
@echo
@echo $(MSG_BEGIN)
end:
@echo $(MSG_END)
@echo
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
2>/dev/null; echo; fi
sizeafter:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
$(LUFA_PATH)/LUFA/LUFA_Events.lst:
@make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
@echo
@echo Checking for invalid events...
@$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
@sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
@if test -s InvalidEvents.tmp; then exit 1; fi
showliboptions:
@echo
@echo ---- Compile Time Library Options ----
@for i in $(LUFA_OPTS:-D%=%); do \
echo $$i; \
done
@echo --------------------------------------
showtarget:
@echo
@echo --------- Target Information ---------
@echo AVR Model: $(MCU)
@echo Board: $(BOARD)
@echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
@echo --------------------------------------
# Display compiler version information.
gccversion :
@$(CC) --version
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
flip: $(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
$(COPY) $(TARGET).eep $(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
debug: gdb-config $(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
endif
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT = $(OBJCOPY) --debugging
COFFCONVERT += --change-section-address .data-0x800000
COFFCONVERT += --change-section-address .bss-0x800000
COFFCONVERT += --change-section-address .noinit-0x800000
COFFCONVERT += --change-section-address .eeprom-0x810000
coff: $(TARGET).elf
@echo
@echo $(MSG_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
extcoff: $(TARGET).elf
@echo
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
%.eep: %.elf
@echo
@echo $(MSG_EEPROM) $@
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
# Create extended listing file from ELF output file.
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -z -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
@echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Create library from object files.
.SECONDARY : $(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
@echo
@echo $(MSG_CREATING_LIBRARY) $@
$(AR) $@ $(OBJ)
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
@echo
@echo $(MSG_LINKING) $@
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
%.s : %.c
$(CC) -S $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C++ source files.
%.s : %.cpp
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
@echo
@echo $(MSG_ASSEMBLING) $<
$(CC) -c $(ALL_ASFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
clean: begin clean_list clean_binary end
clean_binary:
$(REMOVE) $(TARGET).hex
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(TARGET).sym
$(REMOVE) $(TARGET).lss
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
$(REMOVE) InvalidEvents.tmp
$(REMOVEDIR) .dep
doxygen:
@echo Generating Project Documentation...
@doxygen Doxygen.conf
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
# Listing of phony targets.
.PHONY : all checkinvalidevents showliboptions \
showtarget begin finish end sizebefore sizeafter \
gccversion build elf hex eep lss sym coff extcoff \
program dfu flip flip-ee dfu-ee clean debug \
clean_list clean_binary gdb-config doxygen

2
LUFA.pnproj
View File

File diff suppressed because one or more lines are too long

44
LUFA/Drivers/USB/Class/Device/RNDIS.c
Unescape View File

@ -259,13 +259,13 @@ void RNDIS_Device_ProcessRNDISControlMessage(USB_ClassInfo_RNDIS_Device_t* const
RNDIS_Query_Complete_t* QUERY_Response = (RNDIS_Query_Complete_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
uint32_t Query_Oid = QUERY_Message->Oid;
void* QueryData = &RNDISInterfaceInfo->State.RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) +
QUERY_Message->InformationBufferOffset];
void* ResponseData = &RNDISInterfaceInfo->State.RNDISMessageBuffer[sizeof(RNDIS_Query_Complete_t)];
void* QueryData = &RNDISInterfaceInfo->State.RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) +
QUERY_Message->InformationBufferOffset];
void* ResponseData = &RNDISInterfaceInfo->State.RNDISMessageBuffer[sizeof(RNDIS_Query_Complete_t)];
uint16_t ResponseSize;
QUERY_Response->MessageType = REMOTE_NDIS_QUERY_CMPLT;
QUERY_Response->MessageLength = sizeof(RNDIS_Query_Complete_t);
QUERY_Response->MessageType = REMOTE_NDIS_QUERY_CMPLT;
QUERY_Response->MessageLength = sizeof(RNDIS_Query_Complete_t);
if (RNDIS_Device_ProcessNDISQuery(RNDISInterfaceInfo, Query_Oid, QueryData, QUERY_Message->InformationBufferLength,
ResponseData, &ResponseSize))
@ -292,28 +292,26 @@ void RNDIS_Device_ProcessRNDISControlMessage(USB_ClassInfo_RNDIS_Device_t* const
RNDIS_Set_Complete_t* SET_Response = (RNDIS_Set_Complete_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
uint32_t SET_Oid = SET_Message->Oid;
SET_Response->MessageType = REMOTE_NDIS_SET_CMPLT;
SET_Response->MessageLength = sizeof(RNDIS_Set_Complete_t);
SET_Response->RequestId = SET_Message->RequestId;
SET_Response->MessageType = REMOTE_NDIS_SET_CMPLT;
SET_Response->MessageLength = sizeof(RNDIS_Set_Complete_t);
SET_Response->RequestId = SET_Message->RequestId;
void* SetData = &RNDISInterfaceInfo->State.RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) +
SET_Message->InformationBufferOffset];
void* SetData = &RNDISInterfaceInfo->State.RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) +
SET_Message->InformationBufferOffset];
if (RNDIS_Device_ProcessNDISSet(RNDISInterfaceInfo, SET_Oid, SetData, SET_Message->InformationBufferLength))
SET_Response->Status = REMOTE_NDIS_STATUS_SUCCESS;
else
SET_Response->Status = REMOTE_NDIS_STATUS_NOT_SUPPORTED;
SET_Response->Status = RNDIS_Device_ProcessNDISSet(RNDISInterfaceInfo, SET_Oid, SetData,
SET_Message->InformationBufferLength) ?
REMOTE_NDIS_STATUS_SUCCESS : REMOTE_NDIS_STATUS_NOT_SUPPORTED;
break;
case REMOTE_NDIS_RESET_MSG:
RNDISInterfaceInfo->State.ResponseReady = true;
RNDIS_Reset_Complete_t* RESET_Response = (RNDIS_Reset_Complete_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
RESET_Response->MessageType = REMOTE_NDIS_RESET_CMPLT;
RESET_Response->MessageLength = sizeof(RNDIS_Reset_Complete_t);
RESET_Response->Status = REMOTE_NDIS_STATUS_SUCCESS;
RESET_Response->AddressingReset = 0;
RESET_Response->MessageType = REMOTE_NDIS_RESET_CMPLT;
RESET_Response->MessageLength = sizeof(RNDIS_Reset_Complete_t);
RESET_Response->Status = REMOTE_NDIS_STATUS_SUCCESS;
RESET_Response->AddressingReset = 0;
break;
case REMOTE_NDIS_KEEPALIVE_MSG:
@ -324,10 +322,10 @@ void RNDIS_Device_ProcessRNDISControlMessage(USB_ClassInfo_RNDIS_Device_t* const
RNDIS_KeepAlive_Complete_t* KEEPALIVE_Response =
(RNDIS_KeepAlive_Complete_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
KEEPALIVE_Response->MessageType = REMOTE_NDIS_KEEPALIVE_CMPLT;
KEEPALIVE_Response->MessageLength = sizeof(RNDIS_KeepAlive_Complete_t);
KEEPALIVE_Response->RequestId = KEEPALIVE_Message->RequestId;
KEEPALIVE_Response->Status = REMOTE_NDIS_STATUS_SUCCESS;
KEEPALIVE_Response->MessageType = REMOTE_NDIS_KEEPALIVE_CMPLT;
KEEPALIVE_Response->MessageLength = sizeof(RNDIS_KeepAlive_Complete_t);
KEEPALIVE_Response->RequestId = KEEPALIVE_Message->RequestId;
KEEPALIVE_Response->Status = REMOTE_NDIS_STATUS_SUCCESS;
break;
}

2
LUFA/Drivers/USB/Class/Host/StillImage.h
Unescape View File

@ -152,7 +152,7 @@
*/
uint8_t SImage_Host_CloseSession(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/** Sends a given PIMA command to the attached device, filling out the PIMA command header automatically as required.
/** Sends a given PIMA command to the attached device, filling out the PIMA command header's Transaction ID automatically.
*
* \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state
* \param[in] Operation PIMA operation code to issue to the device

6
LUFA/ManPages/Donating.txt
Unescape View File

@ -14,7 +14,11 @@
* and supporter. Please consider donating a small amount to support this and my future Open Source projects - All
* donations are <i>greatly</i> appreciated.
*
* <img src='http://www.pledgie.com/campaigns/6927.png?skin_name=chrome' border='0'></img>
* Note that commercial entities can remove the attribution portion of the LUFA licence by a one-time fee - see
* \ref Page_Licence for more details (<b>Note: Please do NOT pay this in advance through the donation link below -
* contact author for payment details.</b>).
*
* \image html "http://www.pledgie.com/campaigns/6927.png?skin_name=chrome"
* <a href='http://www.pledgie.com/campaigns/6927'>Donate to this project via PayPal</a> - Thanks in Advance!
*/

3
LUFA/ManPages/Licence.txt
Unescape View File

@ -13,7 +13,8 @@
* for a one-time US$1500 payment. This provides a non-exclusive modified MIT licensed which
* allows for the free use of the LUFA library, bootloaders and (where the sole copyright
* is attributed to Dean Camera) demos without public disclosure within an organisation. Please
* contact the author for more information.
* contact the author for more information (<b>Note: Please do NOT pay this in advance through the
* donation link shown on \ref Page_Donating - contact author for payment details.</b>).
*
* \verbatim
* Permission to use, copy, modify, and distribute this software

2
LUFA/ManPages/VIDAndPIDValues.txt
Unescape View File

@ -11,7 +11,7 @@
* are used within the LUFA demos, and thus may be re-used by derivations of each demo. Free PID values may be
* used by future LUFA demo projects.
*
* <b>These VID/PID values should not be used in commercial designs under any circumstances.>/b> Private projects
* <b>These VID/PID values should not be used in commercial designs under any circumstances.</b> Private projects
* may use the following values freely, but must accept any collisions due to other LUFA derived private projects
* sharing identical values. It is suggested that private projects using interfaces compatible with existing
* demos share the save VID/PID value.

Write Preview
Loading…
Cancel
Save