Dean Camera
13 years ago
parent
082537f5bd
commit
6e29655b54
@ -1,73 +1,73 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
#
|
||||
# =============================================================================
|
||||
# Board configuration map script, processed with the "BoardDriverTest"
|
||||
# makefile. This script file maps the possible LUFA target BOARD makefile
|
||||
# value in user projects to a specific architecture and device. This mapping is
|
||||
# then used by the makefile to build all possible drivers for that board, to
|
||||
# detect any missing or erroneous functions. To add a new board mapping, use
|
||||
# the syntax:
|
||||
#
|
||||
# BOARD DEFINE = {ARCH} : {MCU} :
|
||||
#
|
||||
# And re-run the makefile. Note that each board may have only one target.
|
||||
# =============================================================================
|
||||
#
|
||||
#
|
||||
BOARD_USER = AVR8 : at90usb1287 :
|
||||
BOARD_NONE = AVR8 : at90usb1287 :
|
||||
BOARD_USBKEY = AVR8 : at90usb1287 :
|
||||
BOARD_STK525 = AVR8 : at90usb647 :
|
||||
BOARD_STK526 = AVR8 : at90usb162 :
|
||||
BOARD_RZUSBSTICK = AVR8 : at90usb1287 :
|
||||
BOARD_ATAVRUSBRF01 = AVR8 : at90usb1287 :
|
||||
BOARD_BUMBLEB = AVR8 : at90usb162 :
|
||||
BOARD_XPLAIN = AVR8 : at90usb1287 :
|
||||
BOARD_XPLAIN_REV1 = AVR8 : at90usb1287 :
|
||||
BOARD_EVK527 = AVR8 : atmega32u4 :
|
||||
BOARD_TEENSY = AVR8 : at90usb162 :
|
||||
BOARD_USBTINYMKII = AVR8 : at90usb162 :
|
||||
BOARD_BENITO = AVR8 : at90usb162 :
|
||||
BOARD_JMDBU2 = AVR8 : atmega32u2 :
|
||||
BOARD_OLIMEX162 = AVR8 : at90usb162 :
|
||||
BOARD_UDIP = AVR8 : atmega32u2 :
|
||||
BOARD_BUI = AVR8 : at90usb646 :
|
||||
BOARD_UNO = AVR8 : atmega8u2 :
|
||||
BOARD_CULV3 = AVR8 : atmega32u4 :
|
||||
BOARD_BLACKCAT = AVR8 : at90usb162 :
|
||||
BOARD_MAXIMUS = AVR8 : at90usb162 :
|
||||
BOARD_MINIMUS = AVR8 : atmega32u2 :
|
||||
BOARD_ADAFRUITU4 = AVR8 : atmega32u4 :
|
||||
BOARD_MICROSIN162 = AVR8 : atmega162 :
|
||||
BOARD_USBFOO = AVR8 : atmega162 :
|
||||
BOARD_SPARKFUN8U2 = AVR8 : atmega8u2 :
|
||||
BOARD_EVK1101 = UC3 : uc3b0256 :
|
||||
BOARD_TUL = AVR8 : atmega32u4 :
|
||||
BOARD_EVK1100 = UC3 : uc3a0512 :
|
||||
BOARD_EVK1104 = UC3 : uc3a3256 :
|
||||
BOARD_A3BU_XPLAINED = XMEGA : atxmega256a3bu :
|
||||
BOARD_TEENSY2 = AVR8 : at90usb646 :
|
||||
BOARD_USB2AX = AVR8 : atmega32u4 :
|
||||
BOARD_USB2AX_V3 = AVR8 : atmega32u4 :
|
||||
BOARD_MICROPENDOUS_32U2 = AVR8 : atmega32u2 :
|
||||
BOARD_MICROPENDOUS_A = AVR8 : at90usb1287 :
|
||||
BOARD_MICROPENDOUS_1 = AVR8 : at90usb162 :
|
||||
BOARD_MICROPENDOUS_2 = AVR8 : atmega32u4 :
|
||||
BOARD_MICROPENDOUS_3 = AVR8 : at90usb1287 :
|
||||
BOARD_MICROPENDOUS_4 = AVR8 : at90usb1287 :
|
||||
BOARD_MICROPENDOUS_DIP = AVR8 : at90usb1287 :
|
||||
BOARD_MICROPENDOUS_REV1 = AVR8 : at90usb1287 :
|
||||
BOARD_MICROPENDOUS_REV2 = AVR8 : at90usb1287 :
|
||||
BOARD_B1_XPLAINED = XMEGA : atxmega128b1 :
|
||||
BOARD_MULTIO = AVR8 : at90usb162 :
|
||||
BOARD_BIGMULTIO = AVR8 : atmega32u4 :
|
||||
BOARD_DUCE = AVR8 : atmega32u2 :
|
||||
BOARD_OLIMEX32U4 = AVR8 : atmega32u4 :
|
||||
BOARD_OLIMEXT32U4 = AVR8 : atmega32u4 :
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
#
|
||||
# =============================================================================
|
||||
# Board configuration map script, processed with the "BoardDriverTest"
|
||||
# makefile. This script file maps the possible LUFA target BOARD makefile
|
||||
# value in user projects to a specific architecture and device. This mapping is
|
||||
# then used by the makefile to build all possible drivers for that board, to
|
||||
# detect any missing or erroneous functions. To add a new board mapping, use
|
||||
# the syntax:
|
||||
#
|
||||
# BOARD DEFINE = {ARCH} : {MCU} :
|
||||
#
|
||||
# And re-run the makefile. Note that each board may have only one target.
|
||||
# =============================================================================
|
||||
#
|
||||
#
|
||||
BOARD_USER = AVR8 : at90usb1287 :
|
||||
BOARD_NONE = AVR8 : at90usb1287 :
|
||||
BOARD_USBKEY = AVR8 : at90usb1287 :
|
||||
BOARD_STK525 = AVR8 : at90usb647 :
|
||||
BOARD_STK526 = AVR8 : at90usb162 :
|
||||
BOARD_RZUSBSTICK = AVR8 : at90usb1287 :
|
||||
BOARD_ATAVRUSBRF01 = AVR8 : at90usb1287 :
|
||||
BOARD_BUMBLEB = AVR8 : at90usb162 :
|
||||
BOARD_XPLAIN = AVR8 : at90usb1287 :
|
||||
BOARD_XPLAIN_REV1 = AVR8 : at90usb1287 :
|
||||
BOARD_EVK527 = AVR8 : atmega32u4 :
|
||||
BOARD_TEENSY = AVR8 : at90usb162 :
|
||||
BOARD_USBTINYMKII = AVR8 : at90usb162 :
|
||||
BOARD_BENITO = AVR8 : at90usb162 :
|
||||
BOARD_JMDBU2 = AVR8 : atmega32u2 :
|
||||
BOARD_OLIMEX162 = AVR8 : at90usb162 :
|
||||
BOARD_UDIP = AVR8 : atmega32u2 :
|
||||
BOARD_BUI = AVR8 : at90usb646 :
|
||||
BOARD_UNO = AVR8 : atmega8u2 :
|
||||
BOARD_CULV3 = AVR8 : atmega32u4 :
|
||||
BOARD_BLACKCAT = AVR8 : at90usb162 :
|
||||
BOARD_MAXIMUS = AVR8 : at90usb162 :
|
||||
BOARD_MINIMUS = AVR8 : atmega32u2 :
|
||||
BOARD_ADAFRUITU4 = AVR8 : atmega32u4 :
|
||||
BOARD_MICROSIN162 = AVR8 : atmega162 :
|
||||
BOARD_USBFOO = AVR8 : atmega162 :
|
||||
BOARD_SPARKFUN8U2 = AVR8 : atmega8u2 :
|
||||
BOARD_EVK1101 = UC3 : uc3b0256 :
|
||||
BOARD_TUL = AVR8 : atmega32u4 :
|
||||
BOARD_EVK1100 = UC3 : uc3a0512 :
|
||||
BOARD_EVK1104 = UC3 : uc3a3256 :
|
||||
BOARD_A3BU_XPLAINED = XMEGA : atxmega256a3bu :
|
||||
BOARD_TEENSY2 = AVR8 : at90usb646 :
|
||||
BOARD_USB2AX = AVR8 : atmega32u4 :
|
||||
BOARD_USB2AX_V3 = AVR8 : atmega32u4 :
|
||||
BOARD_MICROPENDOUS_32U2 = AVR8 : atmega32u2 :
|
||||
BOARD_MICROPENDOUS_A = AVR8 : at90usb1287 :
|
||||
BOARD_MICROPENDOUS_1 = AVR8 : at90usb162 :
|
||||
BOARD_MICROPENDOUS_2 = AVR8 : atmega32u4 :
|
||||
BOARD_MICROPENDOUS_3 = AVR8 : at90usb1287 :
|
||||
BOARD_MICROPENDOUS_4 = AVR8 : at90usb1287 :
|
||||
BOARD_MICROPENDOUS_DIP = AVR8 : at90usb1287 :
|
||||
BOARD_MICROPENDOUS_REV1 = AVR8 : at90usb1287 :
|
||||
BOARD_MICROPENDOUS_REV2 = AVR8 : at90usb1287 :
|
||||
BOARD_B1_XPLAINED = XMEGA : atxmega128b1 :
|
||||
BOARD_MULTIO = AVR8 : at90usb162 :
|
||||
BOARD_BIGMULTIO = AVR8 : atmega32u4 :
|
||||
BOARD_DUCE = AVR8 : atmega32u2 :
|
||||
BOARD_OLIMEX32U4 = AVR8 : atmega32u4 :
|
||||
BOARD_OLIMEXT32U4 = AVR8 : atmega32u4 :
|
||||
#
|
||||
@ -1,66 +1,66 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Makefile for the board driver build test. This
|
||||
# test attempts to build a dummy project with all
|
||||
# possible board targets using their respective
|
||||
# compiler.
|
||||
|
||||
# Path to the LUFA library core
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
|
||||
all: begin makeboardlist testboards clean end
|
||||
|
||||
begin:
|
||||
@echo Executing build test "BoardDriverTest".
|
||||
@echo
|
||||
|
||||
end:
|
||||
@echo Build test "BoardDriverTest" complete.
|
||||
@echo
|
||||
|
||||
makeboardlist:
|
||||
@grep "BOARD_" $(patsubst %/,%,$(LUFA_PATH))/Common/BoardTypes.h | cut -d'#' -f2 | cut -d' ' -f2 | grep "BOARD_" > BoardList.txt
|
||||
|
||||
testboards:
|
||||
@echo "buildtest:" > BuildMakefile
|
||||
|
||||
@while read line; \
|
||||
do \
|
||||
build_cfg=`grep "$$line " BoardDeviceMap.cfg | grep -v "#" | cut -d'=' -f2- | sed 's/ //g'`; \
|
||||
\
|
||||
build_board=$$line; \
|
||||
build_arch=`echo $$build_cfg | cut -d':' -f1`; \
|
||||
build_mcu=`echo $$build_cfg | cut -d':' -f2`; \
|
||||
\
|
||||
if ( test -z "$$build_cfg" ); then \
|
||||
echo "No matching information set for board $$build_board"; \
|
||||
else \
|
||||
echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu"; \
|
||||
\
|
||||
printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile; \
|
||||
printf "\t$(MAKE) -s -f makefile.test clean elf MCU=%s ARCH=%s BOARD=%s\n\n" $$build_mcu $$build_arch $$build_board >> BuildMakefile; \
|
||||
fi; \
|
||||
done < BoardList.txt
|
||||
|
||||
$(MAKE) -f BuildMakefile buildtest
|
||||
|
||||
clean:
|
||||
rm -f BuildMakefile
|
||||
rm -f BoardList.txt
|
||||
$(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=at90usb1287
|
||||
$(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u
|
||||
$(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=uc3a0256
|
||||
|
||||
%:
|
||||
|
||||
.PHONY: all begin end makeboardlist testboards clean
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Makefile for the board driver build test. This
|
||||
# test attempts to build a dummy project with all
|
||||
# possible board targets using their respective
|
||||
# compiler.
|
||||
|
||||
# Path to the LUFA library core
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
|
||||
all: begin makeboardlist testboards clean end
|
||||
|
||||
begin:
|
||||
@echo Executing build test "BoardDriverTest".
|
||||
@echo
|
||||
|
||||
end:
|
||||
@echo Build test "BoardDriverTest" complete.
|
||||
@echo
|
||||
|
||||
makeboardlist:
|
||||
@grep "BOARD_" $(patsubst %/,%,$(LUFA_PATH))/Common/BoardTypes.h | cut -d'#' -f2 | cut -d' ' -f2 | grep "BOARD_" > BoardList.txt
|
||||
|
||||
testboards:
|
||||
@echo "buildtest:" > BuildMakefile
|
||||
|
||||
@while read line; \
|
||||
do \
|
||||
build_cfg=`grep "$$line " BoardDeviceMap.cfg | grep -v "#" | cut -d'=' -f2- | sed 's/ //g'`; \
|
||||
\
|
||||
build_board=$$line; \
|
||||
build_arch=`echo $$build_cfg | cut -d':' -f1`; \
|
||||
build_mcu=`echo $$build_cfg | cut -d':' -f2`; \
|
||||
\
|
||||
if ( test -z "$$build_cfg" ); then \
|
||||
echo "No matching information set for board $$build_board"; \
|
||||
else \
|
||||
echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu"; \
|
||||
\
|
||||
printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile; \
|
||||
printf "\t$(MAKE) -s -f makefile.test clean elf MCU=%s ARCH=%s BOARD=%s\n\n" $$build_mcu $$build_arch $$build_board >> BuildMakefile; \
|
||||
fi; \
|
||||
done < BoardList.txt
|
||||
|
||||
$(MAKE) -f BuildMakefile buildtest
|
||||
|
||||
clean:
|
||||
rm -f BuildMakefile
|
||||
rm -f BoardList.txt
|
||||
$(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=at90usb1287
|
||||
$(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u
|
||||
$(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=uc3a0256
|
||||
|
||||
%:
|
||||
|
||||
.PHONY: all begin end makeboardlist testboards clean
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
|
||||
@ -1,24 +1,24 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
MCU =
|
||||
ARCH =
|
||||
BOARD =
|
||||
F_CPU = $(F_USB)
|
||||
F_USB = 8000000
|
||||
OPTIMIZATION = 1
|
||||
TARGET = Test
|
||||
SRC = $(TARGET).c
|
||||
LUFA_PATH = ../../LUFA/
|
||||
CC_FLAGS = -Werror
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
MCU =
|
||||
ARCH =
|
||||
BOARD =
|
||||
F_CPU = $(F_USB)
|
||||
F_USB = 8000000
|
||||
OPTIMIZATION = 1
|
||||
TARGET = Test
|
||||
SRC = $(TARGET).c
|
||||
LUFA_PATH = ../../LUFA/
|
||||
CC_FLAGS = -Werror
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.build.in
|
||||
@ -1,63 +1,63 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
#
|
||||
# =============================================================================
|
||||
# Bootloader configuration map script, processed with the "BootloaderTest"
|
||||
# makefile. This script file defines the targets for each LUFA bootloader,
|
||||
# which are then built as part of the build test to ensure that there are no
|
||||
# failures on all standard configurations. To add a new build target for a
|
||||
# bootloader to this script, use the format:
|
||||
#
|
||||
# BOOTLOADER = {ARCH} : {MCU} : {BOARD} : {FLASH SIZE KB} : {BOOT SIZE KB} :
|
||||
#
|
||||
# And re-run the makefile.
|
||||
# =============================================================================
|
||||
#
|
||||
#
|
||||
# ------------ CDC Bootloader -------------
|
||||
CDC = AVR8 : at90usb1287 : NONE : 128 : 8 :
|
||||
CDC = AVR8 : at90usb647 : NONE : 64 : 4 :
|
||||
CDC = AVR8 : at90usb1286 : NONE : 128 : 8 :
|
||||
CDC = AVR8 : at90usb646 : NONE : 64 : 4 :
|
||||
CDC = AVR8 : atmega32u6 : NONE : 32 : 4 :
|
||||
CDC = AVR8 : atmega32u4 : NONE : 32 : 4 :
|
||||
CDC = AVR8 : atmega16u4 : NONE : 16 : 4 :
|
||||
CDC = AVR8 : atmega32u2 : NONE : 32 : 4 :
|
||||
CDC = AVR8 : atmega16u2 : NONE : 16 : 4 :
|
||||
CDC = AVR8 : atmega8u2 : NONE : 8 : 4 :
|
||||
CDC = AVR8 : at90usb162 : NONE : 16 : 4 :
|
||||
CDC = AVR8 : at90usb82 : NONE : 8 : 4 :
|
||||
#
|
||||
# ------------ DFU Bootloader -------------
|
||||
DFU = AVR8 : at90usb1287 : NONE : 128 : 8 :
|
||||
DFU = AVR8 : at90usb647 : NONE : 64 : 4 :
|
||||
DFU = AVR8 : at90usb1286 : NONE : 128 : 8 :
|
||||
DFU = AVR8 : at90usb646 : NONE : 64 : 4 :
|
||||
DFU = AVR8 : atmega32u6 : NONE : 32 : 4 :
|
||||
DFU = AVR8 : atmega32u4 : NONE : 32 : 4 :
|
||||
DFU = AVR8 : atmega16u4 : NONE : 16 : 4 :
|
||||
DFU = AVR8 : atmega32u2 : NONE : 32 : 4 :
|
||||
DFU = AVR8 : atmega16u2 : NONE : 16 : 4 :
|
||||
DFU = AVR8 : atmega8u2 : NONE : 8 : 4 :
|
||||
DFU = AVR8 : at90usb162 : NONE : 16 : 4 :
|
||||
DFU = AVR8 : at90usb82 : NONE : 8 : 4 :
|
||||
#
|
||||
# ------------ HID Bootloader -------------
|
||||
HID = AVR8 : at90usb1287 : NONE : 128 : 4 :
|
||||
HID = AVR8 : at90usb647 : NONE : 64 : 4 :
|
||||
HID = AVR8 : at90usb1286 : NONE : 128 : 4 :
|
||||
HID = AVR8 : at90usb646 : NONE : 64 : 4 :
|
||||
HID = AVR8 : atmega32u6 : NONE : 32 : 4 :
|
||||
HID = AVR8 : atmega32u4 : NONE : 32 : 4 :
|
||||
HID = AVR8 : atmega16u4 : NONE : 16 : 4 :
|
||||
HID = AVR8 : atmega32u2 : NONE : 32 : 2 :
|
||||
HID = AVR8 : atmega16u2 : NONE : 16 : 2 :
|
||||
HID = AVR8 : atmega8u2 : NONE : 8 : 2 :
|
||||
HID = AVR8 : at90usb162 : NONE : 16 : 2 :
|
||||
HID = AVR8 : at90usb82 : NONE : 8 : 2 :
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
#
|
||||
# =============================================================================
|
||||
# Bootloader configuration map script, processed with the "BootloaderTest"
|
||||
# makefile. This script file defines the targets for each LUFA bootloader,
|
||||
# which are then built as part of the build test to ensure that there are no
|
||||
# failures on all standard configurations. To add a new build target for a
|
||||
# bootloader to this script, use the format:
|
||||
#
|
||||
# BOOTLOADER = {ARCH} : {MCU} : {BOARD} : {FLASH SIZE KB} : {BOOT SIZE KB} :
|
||||
#
|
||||
# And re-run the makefile.
|
||||
# =============================================================================
|
||||
#
|
||||
#
|
||||
# ------------ CDC Bootloader -------------
|
||||
CDC = AVR8 : at90usb1287 : NONE : 128 : 8 :
|
||||
CDC = AVR8 : at90usb647 : NONE : 64 : 4 :
|
||||
CDC = AVR8 : at90usb1286 : NONE : 128 : 8 :
|
||||
CDC = AVR8 : at90usb646 : NONE : 64 : 4 :
|
||||
CDC = AVR8 : atmega32u6 : NONE : 32 : 4 :
|
||||
CDC = AVR8 : atmega32u4 : NONE : 32 : 4 :
|
||||
CDC = AVR8 : atmega16u4 : NONE : 16 : 4 :
|
||||
CDC = AVR8 : atmega32u2 : NONE : 32 : 4 :
|
||||
CDC = AVR8 : atmega16u2 : NONE : 16 : 4 :
|
||||
CDC = AVR8 : atmega8u2 : NONE : 8 : 4 :
|
||||
CDC = AVR8 : at90usb162 : NONE : 16 : 4 :
|
||||
CDC = AVR8 : at90usb82 : NONE : 8 : 4 :
|
||||
#
|
||||
# ------------ DFU Bootloader -------------
|
||||
DFU = AVR8 : at90usb1287 : NONE : 128 : 8 :
|
||||
DFU = AVR8 : at90usb647 : NONE : 64 : 4 :
|
||||
DFU = AVR8 : at90usb1286 : NONE : 128 : 8 :
|
||||
DFU = AVR8 : at90usb646 : NONE : 64 : 4 :
|
||||
DFU = AVR8 : atmega32u6 : NONE : 32 : 4 :
|
||||
DFU = AVR8 : atmega32u4 : NONE : 32 : 4 :
|
||||
DFU = AVR8 : atmega16u4 : NONE : 16 : 4 :
|
||||
DFU = AVR8 : atmega32u2 : NONE : 32 : 4 :
|
||||
DFU = AVR8 : atmega16u2 : NONE : 16 : 4 :
|
||||
DFU = AVR8 : atmega8u2 : NONE : 8 : 4 :
|
||||
DFU = AVR8 : at90usb162 : NONE : 16 : 4 :
|
||||
DFU = AVR8 : at90usb82 : NONE : 8 : 4 :
|
||||
#
|
||||
# ------------ HID Bootloader -------------
|
||||
HID = AVR8 : at90usb1287 : NONE : 128 : 4 :
|
||||
HID = AVR8 : at90usb647 : NONE : 64 : 4 :
|
||||
HID = AVR8 : at90usb1286 : NONE : 128 : 4 :
|
||||
HID = AVR8 : at90usb646 : NONE : 64 : 4 :
|
||||
HID = AVR8 : atmega32u6 : NONE : 32 : 4 :
|
||||
HID = AVR8 : atmega32u4 : NONE : 32 : 4 :
|
||||
HID = AVR8 : atmega16u4 : NONE : 16 : 4 :
|
||||
HID = AVR8 : atmega32u2 : NONE : 32 : 2 :
|
||||
HID = AVR8 : atmega16u2 : NONE : 16 : 2 :
|
||||
HID = AVR8 : atmega8u2 : NONE : 8 : 2 :
|
||||
HID = AVR8 : at90usb162 : NONE : 16 : 2 :
|
||||
HID = AVR8 : at90usb82 : NONE : 8 : 2 :
|
||||
#
|
||||
@ -1,61 +1,61 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Makefile for the bootloader build test. This
|
||||
# test attempts to build all the bootloaders
|
||||
# with all supported device configurations.
|
||||
|
||||
# Path to the LUFA library core
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
|
||||
all: begin testbootloaders clean end
|
||||
|
||||
begin:
|
||||
@echo Executing build test "BootloaderTest".
|
||||
@echo
|
||||
|
||||
end:
|
||||
@echo Build test "BootloaderTest" complete.
|
||||
@echo
|
||||
|
||||
testbootloaders:
|
||||
@echo "buildtest:" > BuildMakefile
|
||||
|
||||
@while read line; \
|
||||
do \
|
||||
build_cfg=`echo $$line | grep -v "#" | sed 's/ //g'`; \
|
||||
\
|
||||
if ( test -n "$$build_cfg" ); then \
|
||||
build_bootloader=`echo $$build_cfg | cut -d'=' -f1`; \
|
||||
build_cfg=`echo $$build_cfg | cut -d'=' -f2-`; \
|
||||
\
|
||||
build_arch=`echo $$build_cfg | cut -d':' -f1`; \
|
||||
build_mcu=`echo $$build_cfg | cut -d':' -f2`; \
|
||||
build_board=`echo $$build_cfg | cut -d':' -f3`; \
|
||||
build_flashsize=`echo $$build_cfg | cut -d':' -f4`; \
|
||||
build_bootsize=`echo $$build_cfg | cut -d':' -f5`; \
|
||||
\
|
||||
printf "Found bootloader configuration for bootloader '%s' (FLASH: %3s KB | BOOT: %3s KB | MCU: %12s / %4s)\n" $$build_bootloader $$build_flashsize $$build_bootsize $$build_mcu $$build_arch; \
|
||||
\
|
||||
printf "\t@echo Building bootloader %s - %s - FLASH: %s KB, BOOT: %s KB\n" $$build_bootloader $$build_mcu $$build_flashsize $$build_bootsize >> BuildMakefile; \
|
||||
printf "\t$(MAKE) -s -C $(patsubst %/,%,$(LUFA_PATH))/../Bootloaders/%s/ clean elf ARCH=%s MCU=%s BOARD=%s FLASH_SIZE_KB=%s BOOT_SECTION_SIZE_KB=%s\n\n" $$build_bootloader $$build_arch $$build_mcu $$build_board $$build_flashsize $$build_bootsize >> BuildMakefile; \
|
||||
fi; \
|
||||
done < BootloaderDeviceMap.cfg
|
||||
|
||||
$(MAKE) -f BuildMakefile buildtest
|
||||
|
||||
clean:
|
||||
rm -f BuildMakefile
|
||||
|
||||
%:
|
||||
|
||||
.PHONY: all begin end testbootloaders clean
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Makefile for the bootloader build test. This
|
||||
# test attempts to build all the bootloaders
|
||||
# with all supported device configurations.
|
||||
|
||||
# Path to the LUFA library core
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
|
||||
all: begin testbootloaders clean end
|
||||
|
||||
begin:
|
||||
@echo Executing build test "BootloaderTest".
|
||||
@echo
|
||||
|
||||
end:
|
||||
@echo Build test "BootloaderTest" complete.
|
||||
@echo
|
||||
|
||||
testbootloaders:
|
||||
@echo "buildtest:" > BuildMakefile
|
||||
|
||||
@while read line; \
|
||||
do \
|
||||
build_cfg=`echo $$line | grep -v "#" | sed 's/ //g'`; \
|
||||
\
|
||||
if ( test -n "$$build_cfg" ); then \
|
||||
build_bootloader=`echo $$build_cfg | cut -d'=' -f1`; \
|
||||
build_cfg=`echo $$build_cfg | cut -d'=' -f2-`; \
|
||||
\
|
||||
build_arch=`echo $$build_cfg | cut -d':' -f1`; \
|
||||
build_mcu=`echo $$build_cfg | cut -d':' -f2`; \
|
||||
build_board=`echo $$build_cfg | cut -d':' -f3`; \
|
||||
build_flashsize=`echo $$build_cfg | cut -d':' -f4`; \
|
||||
build_bootsize=`echo $$build_cfg | cut -d':' -f5`; \
|
||||
\
|
||||
printf "Found bootloader configuration for bootloader '%s' (FLASH: %3s KB | BOOT: %3s KB | MCU: %12s / %4s)\n" $$build_bootloader $$build_flashsize $$build_bootsize $$build_mcu $$build_arch; \
|
||||
\
|
||||
printf "\t@echo Building bootloader %s - %s - FLASH: %s KB, BOOT: %s KB\n" $$build_bootloader $$build_mcu $$build_flashsize $$build_bootsize >> BuildMakefile; \
|
||||
printf "\t$(MAKE) -s -C $(patsubst %/,%,$(LUFA_PATH))/../Bootloaders/%s/ clean elf ARCH=%s MCU=%s BOARD=%s FLASH_SIZE_KB=%s BOOT_SECTION_SIZE_KB=%s\n\n" $$build_bootloader $$build_arch $$build_mcu $$build_board $$build_flashsize $$build_bootsize >> BuildMakefile; \
|
||||
fi; \
|
||||
done < BootloaderDeviceMap.cfg
|
||||
|
||||
$(MAKE) -f BuildMakefile buildtest
|
||||
|
||||
clean:
|
||||
rm -f BuildMakefile
|
||||
|
||||
%:
|
||||
|
||||
.PHONY: all begin end testbootloaders clean
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
|
||||
@ -1,41 +1,41 @@
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
.section .text
|
||||
|
||||
|
||||
# Mandatory entry point for successful compilation and link
|
||||
.global main
|
||||
main:
|
||||
|
||||
|
||||
# Mandatory callback needed for base compile of the USB driver
|
||||
.global CALLBACK_USB_GetDescriptor
|
||||
CALLBACK_USB_GetDescriptor:
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
.section .text
|
||||
|
||||
|
||||
# Mandatory entry point for successful compilation and link
|
||||
.global main
|
||||
main:
|
||||
|
||||
|
||||
# Mandatory callback needed for base compile of the USB driver
|
||||
.global CALLBACK_USB_GetDescriptor
|
||||
CALLBACK_USB_GetDescriptor:
|
||||
|
||||
@ -1,58 +1,58 @@
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#include <LUFA/Common/Common.h>
|
||||
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Misc/RingBuffer.h>
|
||||
#include <LUFA/Drivers/Misc/TerminalCodes.h>
|
||||
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
#if defined(TWCR)
|
||||
#include <LUFA/Drivers/Peripheral/TWI.h>
|
||||
#endif
|
||||
|
||||
#if defined(ADC)
|
||||
#include <LUFA/Drivers/Peripheral/ADC.h>
|
||||
#endif
|
||||
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Peripheral/SPI.h>
|
||||
#include <LUFA/Drivers/Peripheral/SerialSPI.h>
|
||||
#elif (ARCH == ARCH_XMEGA)
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Peripheral/SPI.h>
|
||||
#include <LUFA/Drivers/Peripheral/SerialSPI.h>
|
||||
|
||||
#include <LUFA/Platform/XMEGA/ClockManagement.h>
|
||||
#elif (ARCH == ARCH_UC3)
|
||||
#include <LUFA/Platform/UC3/ClockManagement.h>
|
||||
#include <LUFA/Platform/UC3/InterruptManagement.h>
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#include <LUFA/Common/Common.h>
|
||||
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
#include <LUFA/Drivers/Misc/RingBuffer.h>
|
||||
#include <LUFA/Drivers/Misc/TerminalCodes.h>
|
||||
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
#if defined(TWCR)
|
||||
#include <LUFA/Drivers/Peripheral/TWI.h>
|
||||
#endif
|
||||
|
||||
#if defined(ADC)
|
||||
#include <LUFA/Drivers/Peripheral/ADC.h>
|
||||
#endif
|
||||
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Peripheral/SPI.h>
|
||||
#include <LUFA/Drivers/Peripheral/SerialSPI.h>
|
||||
#elif (ARCH == ARCH_XMEGA)
|
||||
#include <LUFA/Drivers/Peripheral/Serial.h>
|
||||
#include <LUFA/Drivers/Peripheral/SPI.h>
|
||||
#include <LUFA/Drivers/Peripheral/SerialSPI.h>
|
||||
|
||||
#include <LUFA/Platform/XMEGA/ClockManagement.h>
|
||||
#elif (ARCH == ARCH_UC3)
|
||||
#include <LUFA/Platform/UC3/ClockManagement.h>
|
||||
#include <LUFA/Platform/UC3/InterruptManagement.h>
|
||||
#endif
|
||||
@ -1,31 +1,31 @@
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#include "Modules.h"
|
||||
@ -1,31 +1,31 @@
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#include "Modules.h"
|
||||
@ -1,60 +1,60 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Makefile for the module build test. This test
|
||||
# attempts to build as many modules as possible
|
||||
# under all supported architectures, and include
|
||||
# all module headers in a simple C and C++
|
||||
# application.
|
||||
|
||||
# Path to the LUFA library core
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
# List of device families per architecture, one device per architecture sub-family
|
||||
AVR8_FAMILIES = at90usb1287 at90usb1286 atmega16u4 atmega16u2 at90usb162
|
||||
XMEGA_FAMILIES = atxmega128a1u atxmega128a3u atxmega256a3bu atxmega128a4u atxmega128b1 atxmega128b3 atxmega128c3 atxmega32c4
|
||||
UC3_FAMILIES = uc3a0256 uc3a1256 uc3a3256 uc3a4256 uc3b0256 uc3b1256
|
||||
|
||||
# List of all device families, with a family postfix
|
||||
DEVICE_FAMILIES = $(AVR8_FAMILIES:%=%.avr8) $(XMEGA_FAMILIES:%=%.xmega) $(UC3_FAMILIES:%=%.uc3)
|
||||
|
||||
|
||||
all: begin $(DEVICE_FAMILIES) clean end
|
||||
|
||||
arch_avr8: begin $(AVR8_FAMILIES:%=%.avr8) end
|
||||
arch_xmega: begin $(XMEGA_FAMILIES:%=%.xmega) end
|
||||
arch_uc3: begin $(UC3_FAMILIES:%=%.uc3) end
|
||||
|
||||
begin:
|
||||
@echo Executing build test "ModuleTest".
|
||||
@echo
|
||||
|
||||
end:
|
||||
@echo Build test "ModuleTest" complete.
|
||||
@echo
|
||||
|
||||
%.avr8:
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=AVR8 MCU=$(@:%.avr8=%)
|
||||
|
||||
%.xmega:
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=XMEGA MCU=$(@:%.xmega=%)
|
||||
|
||||
%.uc3:
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=$(@:%.uc3=%)
|
||||
|
||||
clean:
|
||||
$(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=$(firstword $(AVR8_FAMILIES))
|
||||
$(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=$(firstword $(XMEGA_FAMILIES))
|
||||
$(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=$(firstword $(UC3_FAMILIES))
|
||||
|
||||
%:
|
||||
|
||||
.PHONY: all arch_avr8 arch_xmega arch_uc3 begin end
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Makefile for the module build test. This test
|
||||
# attempts to build as many modules as possible
|
||||
# under all supported architectures, and include
|
||||
# all module headers in a simple C and C++
|
||||
# application.
|
||||
|
||||
# Path to the LUFA library core
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
# List of device families per architecture, one device per architecture sub-family
|
||||
AVR8_FAMILIES = at90usb1287 at90usb1286 atmega16u4 atmega16u2 at90usb162
|
||||
XMEGA_FAMILIES = atxmega128a1u atxmega128a3u atxmega256a3bu atxmega128a4u atxmega128b1 atxmega128b3 atxmega128c3 atxmega32c4
|
||||
UC3_FAMILIES = uc3a0256 uc3a1256 uc3a3256 uc3a4256 uc3b0256 uc3b1256
|
||||
|
||||
# List of all device families, with a family postfix
|
||||
DEVICE_FAMILIES = $(AVR8_FAMILIES:%=%.avr8) $(XMEGA_FAMILIES:%=%.xmega) $(UC3_FAMILIES:%=%.uc3)
|
||||
|
||||
|
||||
all: begin $(DEVICE_FAMILIES) clean end
|
||||
|
||||
arch_avr8: begin $(AVR8_FAMILIES:%=%.avr8) end
|
||||
arch_xmega: begin $(XMEGA_FAMILIES:%=%.xmega) end
|
||||
arch_uc3: begin $(UC3_FAMILIES:%=%.uc3) end
|
||||
|
||||
begin:
|
||||
@echo Executing build test "ModuleTest".
|
||||
@echo
|
||||
|
||||
end:
|
||||
@echo Build test "ModuleTest" complete.
|
||||
@echo
|
||||
|
||||
%.avr8:
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=AVR8 MCU=$(@:%.avr8=%)
|
||||
|
||||
%.xmega:
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=XMEGA MCU=$(@:%.xmega=%)
|
||||
|
||||
%.uc3:
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=$(@:%.uc3=%)
|
||||
|
||||
clean:
|
||||
$(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=$(firstword $(AVR8_FAMILIES))
|
||||
$(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=$(firstword $(XMEGA_FAMILIES))
|
||||
$(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=$(firstword $(UC3_FAMILIES))
|
||||
|
||||
%:
|
||||
|
||||
.PHONY: all arch_avr8 arch_xmega arch_uc3 begin end
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
|
||||
@ -1,65 +1,65 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
MCU =
|
||||
ARCH =
|
||||
BOARD = NONE
|
||||
F_CPU = $(F_USB)
|
||||
OPTIMIZATION = 1
|
||||
TARGET = Test
|
||||
SRC = $(TARGET)_C.c $(TARGET)_CPP.cpp Dummy.S $(LUFA_SRC_USB)
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
ifeq ($(ARCH), AVR8)
|
||||
F_USB = 8000000
|
||||
else ifeq ($(ARCH), XMEGA)
|
||||
F_USB = 48000000
|
||||
else ifeq ($(ARCH), UC3)
|
||||
F_USB = 48000000
|
||||
endif
|
||||
|
||||
# Generic C/C++ compiler flags
|
||||
CC_FLAGS = -Wextra
|
||||
CC_FLAGS += -Werror
|
||||
CC_FLAGS += -Wformat=2
|
||||
CC_FLAGS += -Winit-self
|
||||
CC_FLAGS += -Wswitch-enum
|
||||
CC_FLAGS += -Wunused
|
||||
CC_FLAGS += -Wundef
|
||||
CC_FLAGS += -Wpointer-arith
|
||||
CC_FLAGS += -Wcast-align
|
||||
CC_FLAGS += -Wwrite-strings
|
||||
CC_FLAGS += -Wlogical-op
|
||||
CC_FLAGS += -Wmissing-declarations
|
||||
CC_FLAGS += -Wmissing-field-initializers
|
||||
CC_FLAGS += -Wmissing-format-attribute
|
||||
CC_FLAGS += -Woverlength-strings
|
||||
|
||||
# Only enable rendundant declaration warnings for AVR8 target (FIXME)
|
||||
ifeq ($(ARCH), AVR8)
|
||||
CC_FLAGS += -Wredundant-decls
|
||||
endif
|
||||
|
||||
# C compiler only flags
|
||||
C_FLAGS += -Wmissing-parameter-type
|
||||
C_FLAGS += -Wnested-externs
|
||||
|
||||
# Potential additional warnings to enable in the future (FIXME)
|
||||
#CC_FLAGS += -Wswitch-default
|
||||
#CC_FLAGS += -Wc++-compat
|
||||
#CC_FLAGS += -Wcast-qual
|
||||
#CC_FLAGS += -Wconversion
|
||||
#CC_FLAGS += -Wjump-misses-init
|
||||
#CC_FLAGS += -pedantic
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.sources.in
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
MCU =
|
||||
ARCH =
|
||||
BOARD = NONE
|
||||
F_CPU = $(F_USB)
|
||||
OPTIMIZATION = 1
|
||||
TARGET = Test
|
||||
SRC = $(TARGET)_C.c $(TARGET)_CPP.cpp Dummy.S $(LUFA_SRC_USB)
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
ifeq ($(ARCH), AVR8)
|
||||
F_USB = 8000000
|
||||
else ifeq ($(ARCH), XMEGA)
|
||||
F_USB = 48000000
|
||||
else ifeq ($(ARCH), UC3)
|
||||
F_USB = 48000000
|
||||
endif
|
||||
|
||||
# Generic C/C++ compiler flags
|
||||
CC_FLAGS = -Wextra
|
||||
CC_FLAGS += -Werror
|
||||
CC_FLAGS += -Wformat=2
|
||||
CC_FLAGS += -Winit-self
|
||||
CC_FLAGS += -Wswitch-enum
|
||||
CC_FLAGS += -Wunused
|
||||
CC_FLAGS += -Wundef
|
||||
CC_FLAGS += -Wpointer-arith
|
||||
CC_FLAGS += -Wcast-align
|
||||
CC_FLAGS += -Wwrite-strings
|
||||
CC_FLAGS += -Wlogical-op
|
||||
CC_FLAGS += -Wmissing-declarations
|
||||
CC_FLAGS += -Wmissing-field-initializers
|
||||
CC_FLAGS += -Wmissing-format-attribute
|
||||
CC_FLAGS += -Woverlength-strings
|
||||
|
||||
# Only enable rendundant declaration warnings for AVR8 target (FIXME)
|
||||
ifeq ($(ARCH), AVR8)
|
||||
CC_FLAGS += -Wredundant-decls
|
||||
endif
|
||||
|
||||
# C compiler only flags
|
||||
C_FLAGS += -Wmissing-parameter-type
|
||||
C_FLAGS += -Wnested-externs
|
||||
|
||||
# Potential additional warnings to enable in the future (FIXME)
|
||||
#CC_FLAGS += -Wswitch-default
|
||||
#CC_FLAGS += -Wc++-compat
|
||||
#CC_FLAGS += -Wcast-qual
|
||||
#CC_FLAGS += -Wconversion
|
||||
#CC_FLAGS += -Wjump-misses-init
|
||||
#CC_FLAGS += -pedantic
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.sources.in
|
||||
include $(LUFA_PATH)/Build/lufa.build.in
|
||||
@ -1,42 +1,42 @@
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
.section .text
|
||||
|
||||
|
||||
# Mandatory entry point for successful compilation and link
|
||||
.global main
|
||||
main:
|
||||
# Force code generation of the base USB stack
|
||||
call USB_Init
|
||||
|
||||
# Mandatory callback needed for base compile of the USB driver
|
||||
.global CALLBACK_USB_GetDescriptor
|
||||
CALLBACK_USB_GetDescriptor:
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
.section .text
|
||||
|
||||
|
||||
# Mandatory entry point for successful compilation and link
|
||||
.global main
|
||||
main:
|
||||
# Force code generation of the base USB stack
|
||||
call USB_Init
|
||||
|
||||
# Mandatory callback needed for base compile of the USB driver
|
||||
.global CALLBACK_USB_GetDescriptor
|
||||
CALLBACK_USB_GetDescriptor:
|
||||
|
||||
@ -1,32 +1,32 @@
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#include <LUFA/Common/Common.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#include <LUFA/Common/Common.h>
|
||||
#include <LUFA/Drivers/USB/USB.h>
|
||||
|
||||
@ -1,46 +1,46 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Makefile for the single USB mode build test.
|
||||
# This test attempts to build the USB module
|
||||
# under fixed device and fixed host modes under
|
||||
# all supported architectures
|
||||
|
||||
# Path to the LUFA library core
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
all: begin compile clean end
|
||||
|
||||
begin:
|
||||
@echo Executing build test "SingleUSBModeTest".
|
||||
@echo
|
||||
|
||||
end:
|
||||
@echo Build test "SingleUSBModeTest" complete.
|
||||
@echo
|
||||
|
||||
compile:
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_DEVICE_ONLY'
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_HOST_ONLY'
|
||||
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=XMEGA MCU=atxmega128a1u CC_FLAGS='-D USB_DEVICE_ONLY'
|
||||
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_DEVICE_ONLY'
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_HOST_ONLY'
|
||||
|
||||
clean:
|
||||
$(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=at90usb1287
|
||||
$(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u
|
||||
$(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=uc3a0256
|
||||
|
||||
%:
|
||||
|
||||
.PHONY: begin end compile clean
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Makefile for the single USB mode build test.
|
||||
# This test attempts to build the USB module
|
||||
# under fixed device and fixed host modes under
|
||||
# all supported architectures
|
||||
|
||||
# Path to the LUFA library core
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
all: begin compile clean end
|
||||
|
||||
begin:
|
||||
@echo Executing build test "SingleUSBModeTest".
|
||||
@echo
|
||||
|
||||
end:
|
||||
@echo Build test "SingleUSBModeTest" complete.
|
||||
@echo
|
||||
|
||||
compile:
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_DEVICE_ONLY'
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_HOST_ONLY'
|
||||
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=XMEGA MCU=atxmega128a1u CC_FLAGS='-D USB_DEVICE_ONLY'
|
||||
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_DEVICE_ONLY'
|
||||
$(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_HOST_ONLY'
|
||||
|
||||
clean:
|
||||
$(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=at90usb1287
|
||||
$(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u
|
||||
$(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=uc3a0256
|
||||
|
||||
%:
|
||||
|
||||
.PHONY: begin end compile clean
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
|
||||
@ -1,34 +1,34 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
MCU =
|
||||
ARCH =
|
||||
BOARD = NONE
|
||||
F_CPU = $(F_USB)
|
||||
|
||||
ifeq ($(ARCH), AVR8)
|
||||
F_USB = 8000000
|
||||
else ifeq ($(ARCH), XMEGA)
|
||||
F_USB = 48000000
|
||||
else ifeq ($(ARCH), UC3)
|
||||
F_USB = 48000000
|
||||
endif
|
||||
|
||||
OPTIMIZATION = 1
|
||||
TARGET = Test
|
||||
SRC = Test.c Dummy.S $(LUFA_SRC_USB)
|
||||
LUFA_PATH = ../../LUFA/
|
||||
CC_FLAGS =
|
||||
# TODO: Add warnings and set warnings as errors
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.sources.in
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
MCU =
|
||||
ARCH =
|
||||
BOARD = NONE
|
||||
F_CPU = $(F_USB)
|
||||
|
||||
ifeq ($(ARCH), AVR8)
|
||||
F_USB = 8000000
|
||||
else ifeq ($(ARCH), XMEGA)
|
||||
F_USB = 48000000
|
||||
else ifeq ($(ARCH), UC3)
|
||||
F_USB = 48000000
|
||||
endif
|
||||
|
||||
OPTIMIZATION = 1
|
||||
TARGET = Test
|
||||
SRC = Test.c Dummy.S $(LUFA_SRC_USB)
|
||||
LUFA_PATH = ../../LUFA/
|
||||
CC_FLAGS =
|
||||
# TODO: Add warnings and set warnings as errors
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.sources.in
|
||||
include $(LUFA_PATH)/Build/lufa.build.in
|
||||
@ -1,38 +1,38 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Static anlysis of the entire LUFA source tree, using the free cross-platform "cppcheck" tool.
|
||||
|
||||
# Path to the LUFA library core
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
CPPCHECK_EXCLUDES = FATFs/ \
|
||||
PetiteFATFs/ \
|
||||
uip/
|
||||
CPPCHECK_INCLUDES = $(patsubst %/,%,$(LUFA_PATH))/CodeTemplates/ \
|
||||
$(patsubst %/,%,$(LUFA_PATH))/../Projects/AVRISP-MKII/
|
||||
CPPCHECK_PATH = $(patsubst %/,%,$(LUFA_PATH))/..
|
||||
|
||||
all: begin cppcheck-config cppcheck end
|
||||
|
||||
begin:
|
||||
@echo Executing build test "StaticAnalysisTest".
|
||||
@echo
|
||||
|
||||
end:
|
||||
@echo Build test "StaticAnalysisTest" complete.
|
||||
@echo
|
||||
|
||||
%:
|
||||
|
||||
|
||||
.PHONY: all begin end
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Static anlysis of the entire LUFA source tree, using the free cross-platform "cppcheck" tool.
|
||||
|
||||
# Path to the LUFA library core
|
||||
LUFA_PATH = ../../LUFA/
|
||||
|
||||
CPPCHECK_EXCLUDES = FATFs/ \
|
||||
PetiteFATFs/ \
|
||||
uip/
|
||||
CPPCHECK_INCLUDES = $(patsubst %/,%,$(LUFA_PATH))/CodeTemplates/ \
|
||||
$(patsubst %/,%,$(LUFA_PATH))/../Projects/AVRISP-MKII/
|
||||
CPPCHECK_PATH = $(patsubst %/,%,$(LUFA_PATH))/..
|
||||
|
||||
all: begin cppcheck-config cppcheck end
|
||||
|
||||
begin:
|
||||
@echo Executing build test "StaticAnalysisTest".
|
||||
@echo
|
||||
|
||||
end:
|
||||
@echo Build test "StaticAnalysisTest" complete.
|
||||
@echo
|
||||
|
||||
%:
|
||||
|
||||
|
||||
.PHONY: all begin end
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
include $(LUFA_PATH)/Build/lufa.cppcheck.in
|
||||
@ -1,19 +1,19 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Makefile to build all the LUFA Build Tests. Build Tests are
|
||||
# used to verify the correctness of the LUFA library, and are
|
||||
# not intended to be modified or compiled by non-developers.
|
||||
|
||||
all:
|
||||
%:
|
||||
$(MAKE) -C BoardDriverTest $@
|
||||
$(MAKE) -C BootloaderTest $@
|
||||
$(MAKE) -C ModuleTest $@
|
||||
$(MAKE) -C SingleUSBModeTest $@
|
||||
$(MAKE) -C StaticAnalysisTest $@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Makefile to build all the LUFA Build Tests. Build Tests are
|
||||
# used to verify the correctness of the LUFA library, and are
|
||||
# not intended to be modified or compiled by non-developers.
|
||||
|
||||
all:
|
||||
%:
|
||||
$(MAKE) -C BoardDriverTest $@
|
||||
$(MAKE) -C BootloaderTest $@
|
||||
$(MAKE) -C ModuleTest $@
|
||||
$(MAKE) -C SingleUSBModeTest $@
|
||||
$(MAKE) -C StaticAnalysisTest $@
|
||||
|
||||
@ -1,89 +1,89 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += ATPROGRAM
|
||||
LUFA_BUILD_TARGETS += atprogram atprogram-ee
|
||||
LUFA_BUILD_MANDATORY_VARS += MCU TARGET
|
||||
LUFA_BUILD_OPTIONAL_VARS += ATPROGRAM_PROGRAMMER ATPROGRAM_INTERFACE ATPROGRAM_PORT
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA ATPROGRAM Programmer Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to re-program a device using the Atmel atprogram
|
||||
# utility in AVR Studio 5.x and Atmel Studio 6.0 onwards.
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# atprogram - Program target FLASH with application using
|
||||
# atprogram
|
||||
# atprogram-ee - Program target EEPROM with application data
|
||||
# using atprogram
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# MCU - Microcontroller device model name
|
||||
# TARGET - Application name
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# ATPROGRAM_PROGRAMMER - Name of programming hardware to use
|
||||
# ATPROGRAM_INTERFACE - Name of programming interface to use
|
||||
# ATPROGRAM_PORT - Name of communication port to use
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
MCU ?= $(error Makefile MCU value not set)
|
||||
TARGET ?= $(error Makefile TARGET value not set)
|
||||
|
||||
ifeq ($(MCU),)
|
||||
$(error Makefile MCU option cannot be blank)
|
||||
endif
|
||||
ifeq ($(TARGET),)
|
||||
$(error Makefile TARGET option cannot be blank)
|
||||
endif
|
||||
|
||||
# Default values of optionally user-supplied variables
|
||||
ATPROGRAM_PROGRAMMER ?= jtagice3
|
||||
ATPROGRAM_INTERFACE ?= jtag
|
||||
ATPROGRAM_PORT ?=
|
||||
|
||||
# Output Messages
|
||||
MSG_ATPROGRAM_CMD := ' [ATPRGRM] :'
|
||||
|
||||
# Construct base atprogram command flags
|
||||
BASE_ATPROGRAM_FLAGS := --tool $(ATPROGRAM_PROGRAMMER) --interface $(ATPROGRAM_INTERFACE) --device $(MCU)
|
||||
ifneq ($(ATPROGRAM_PORT),)
|
||||
BASE_ATPROGRAM_FLAGS += --port $(ATPROGRAM_PORT)
|
||||
endif
|
||||
|
||||
# Construct the flags to use for the various memory spaces
|
||||
ifeq ($(ARCH), AVR8)
|
||||
ATPROGRAM_FLASH_FLAGS := --chiperase --flash
|
||||
ATPROGRAM_EEPROM_FLAGS := --eeprom
|
||||
else ifeq ($(ARCH), XMEGA)
|
||||
ATPROGRAM_FLASH_FLAGS := --erase --flash
|
||||
ATPROGRAM_EEPROM_FLAGS := --eeprom
|
||||
else ifeq ($(ARCH), UC3)
|
||||
ATPROGRAM_FLASH_FLAGS := --erase
|
||||
ATPROGRAM_EEPROM_FLAGS := --eeprom
|
||||
else
|
||||
$(error Unsupported architecture "$(ARCH)")
|
||||
endif
|
||||
|
||||
atprogram: $(TARGET).elf $(MAKEFILE_LIST)
|
||||
@echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" FLASH using \"$(ATPROGRAM_PROGRAMMER)\"
|
||||
atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_FLASH_FLAGS) --file $<
|
||||
|
||||
atprogram-ee: $(TARGET).elf $(MAKEFILE_LIST)
|
||||
@echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" EEPROM using \"$(ATPROGRAM_PROGRAMMER)\"
|
||||
atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_EEPROM_FLAGS) --file $<
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: atprogram atprogram-ee
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += ATPROGRAM
|
||||
LUFA_BUILD_TARGETS += atprogram atprogram-ee
|
||||
LUFA_BUILD_MANDATORY_VARS += MCU TARGET
|
||||
LUFA_BUILD_OPTIONAL_VARS += ATPROGRAM_PROGRAMMER ATPROGRAM_INTERFACE ATPROGRAM_PORT
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA ATPROGRAM Programmer Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to re-program a device using the Atmel atprogram
|
||||
# utility in AVR Studio 5.x and Atmel Studio 6.0 onwards.
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# atprogram - Program target FLASH with application using
|
||||
# atprogram
|
||||
# atprogram-ee - Program target EEPROM with application data
|
||||
# using atprogram
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# MCU - Microcontroller device model name
|
||||
# TARGET - Application name
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# ATPROGRAM_PROGRAMMER - Name of programming hardware to use
|
||||
# ATPROGRAM_INTERFACE - Name of programming interface to use
|
||||
# ATPROGRAM_PORT - Name of communication port to use
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
MCU ?= $(error Makefile MCU value not set)
|
||||
TARGET ?= $(error Makefile TARGET value not set)
|
||||
|
||||
ifeq ($(MCU),)
|
||||
$(error Makefile MCU option cannot be blank)
|
||||
endif
|
||||
ifeq ($(TARGET),)
|
||||
$(error Makefile TARGET option cannot be blank)
|
||||
endif
|
||||
|
||||
# Default values of optionally user-supplied variables
|
||||
ATPROGRAM_PROGRAMMER ?= jtagice3
|
||||
ATPROGRAM_INTERFACE ?= jtag
|
||||
ATPROGRAM_PORT ?=
|
||||
|
||||
# Output Messages
|
||||
MSG_ATPROGRAM_CMD := ' [ATPRGRM] :'
|
||||
|
||||
# Construct base atprogram command flags
|
||||
BASE_ATPROGRAM_FLAGS := --tool $(ATPROGRAM_PROGRAMMER) --interface $(ATPROGRAM_INTERFACE) --device $(MCU)
|
||||
ifneq ($(ATPROGRAM_PORT),)
|
||||
BASE_ATPROGRAM_FLAGS += --port $(ATPROGRAM_PORT)
|
||||
endif
|
||||
|
||||
# Construct the flags to use for the various memory spaces
|
||||
ifeq ($(ARCH), AVR8)
|
||||
ATPROGRAM_FLASH_FLAGS := --chiperase --flash
|
||||
ATPROGRAM_EEPROM_FLAGS := --eeprom
|
||||
else ifeq ($(ARCH), XMEGA)
|
||||
ATPROGRAM_FLASH_FLAGS := --erase --flash
|
||||
ATPROGRAM_EEPROM_FLAGS := --eeprom
|
||||
else ifeq ($(ARCH), UC3)
|
||||
ATPROGRAM_FLASH_FLAGS := --erase
|
||||
ATPROGRAM_EEPROM_FLAGS := --eeprom
|
||||
else
|
||||
$(error Unsupported architecture "$(ARCH)")
|
||||
endif
|
||||
|
||||
atprogram: $(TARGET).elf $(MAKEFILE_LIST)
|
||||
@echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" FLASH using \"$(ATPROGRAM_PROGRAMMER)\"
|
||||
atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_FLASH_FLAGS) --file $<
|
||||
|
||||
atprogram-ee: $(TARGET).elf $(MAKEFILE_LIST)
|
||||
@echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" EEPROM using \"$(ATPROGRAM_PROGRAMMER)\"
|
||||
atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_EEPROM_FLAGS) --file $<
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: atprogram atprogram-ee
|
||||
|
||||
@ -1,69 +1,69 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += AVRDUDE
|
||||
LUFA_BUILD_TARGETS += avrdude avrdude-ee
|
||||
LUFA_BUILD_MANDATORY_VARS += MCU TARGET
|
||||
LUFA_BUILD_OPTIONAL_VARS += AVRDUDE_PROGRAMMER AVRDUDE_PORT AVRDUDE_FLAGS
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA AVRDUDE Programmer Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to re-program a device using the open source
|
||||
# avr-dude utility.
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# avrdude - Program target FLASH with application using
|
||||
# avrdude
|
||||
# avrdude-ee - Program target EEPROM with application data
|
||||
# using avrdude
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# MCU - Microcontroller device model name
|
||||
# TARGET - Application name
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# AVRDUDE_PROGRAMMER - Name of programming hardware to use
|
||||
# AVRDUDE_PORT - Name of communication port to use
|
||||
# AVRDUDE_FLAGS - Flags to pass to avr-dude
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
MCU ?= $(error Makefile MCU value not set)
|
||||
TARGET ?= $(error Makefile TARGET value not set)
|
||||
|
||||
ifeq ($(MCU),)
|
||||
$(error Makefile MCU option cannot be blank)
|
||||
endif
|
||||
ifeq ($(TARGET),)
|
||||
$(error Makefile TARGET option cannot be blank)
|
||||
endif
|
||||
|
||||
# Default values of optionally user-supplied variables
|
||||
AVRDUDE_PROGRAMMER ?= jtagicemkii
|
||||
AVRDUDE_PORT ?= usb
|
||||
AVRDUDE_FLAGS ?=
|
||||
|
||||
# Output Messages
|
||||
MSG_AVRDUDE_CMD := ' [AVRDUDE] :'
|
||||
|
||||
avrdude: $(TARGET).hex $(MAKEFILE_LIST)
|
||||
@echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" FLASH with settings \"$(AVRDUDE_FLASH_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
|
||||
avrdude -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -U flash:w:$< $(AVRDUDE_FLAGS)
|
||||
|
||||
avrdude-ee: $(TARGET).eep $(MAKEFILE_LIST)
|
||||
@echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" EEPROM with settings \"$(AVRDUDE_EEP_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
|
||||
avrdude -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -U eeprom:w:$< $(AVRDUDE_FLAGS)
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: avrdude avrdude-ee
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += AVRDUDE
|
||||
LUFA_BUILD_TARGETS += avrdude avrdude-ee
|
||||
LUFA_BUILD_MANDATORY_VARS += MCU TARGET
|
||||
LUFA_BUILD_OPTIONAL_VARS += AVRDUDE_PROGRAMMER AVRDUDE_PORT AVRDUDE_FLAGS
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA AVRDUDE Programmer Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to re-program a device using the open source
|
||||
# avr-dude utility.
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# avrdude - Program target FLASH with application using
|
||||
# avrdude
|
||||
# avrdude-ee - Program target EEPROM with application data
|
||||
# using avrdude
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# MCU - Microcontroller device model name
|
||||
# TARGET - Application name
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# AVRDUDE_PROGRAMMER - Name of programming hardware to use
|
||||
# AVRDUDE_PORT - Name of communication port to use
|
||||
# AVRDUDE_FLAGS - Flags to pass to avr-dude
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
MCU ?= $(error Makefile MCU value not set)
|
||||
TARGET ?= $(error Makefile TARGET value not set)
|
||||
|
||||
ifeq ($(MCU),)
|
||||
$(error Makefile MCU option cannot be blank)
|
||||
endif
|
||||
ifeq ($(TARGET),)
|
||||
$(error Makefile TARGET option cannot be blank)
|
||||
endif
|
||||
|
||||
# Default values of optionally user-supplied variables
|
||||
AVRDUDE_PROGRAMMER ?= jtagicemkii
|
||||
AVRDUDE_PORT ?= usb
|
||||
AVRDUDE_FLAGS ?=
|
||||
|
||||
# Output Messages
|
||||
MSG_AVRDUDE_CMD := ' [AVRDUDE] :'
|
||||
|
||||
avrdude: $(TARGET).hex $(MAKEFILE_LIST)
|
||||
@echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" FLASH with settings \"$(AVRDUDE_FLASH_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
|
||||
avrdude -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -U flash:w:$< $(AVRDUDE_FLAGS)
|
||||
|
||||
avrdude-ee: $(TARGET).eep $(MAKEFILE_LIST)
|
||||
@echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" EEPROM with settings \"$(AVRDUDE_EEP_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
|
||||
avrdude -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -U eeprom:w:$< $(AVRDUDE_FLAGS)
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: avrdude avrdude-ee
|
||||
|
||||
@ -1,240 +1,240 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += BUILD
|
||||
LUFA_BUILD_TARGETS += size symbol-sizes all elf hex lss clean
|
||||
LUFA_BUILD_MANDATORY_VARS += TARGET ARCH MCU SRC F_USB LUFA_PATH
|
||||
LUFA_BUILD_OPTIONAL_VARS += BOARD OPTIMIZATION C_STANDARD CPP_STANDARD F_CPU C_FLAGS CPP_FLAGS ASM_FLAGS CC_FLAGS LD_FLAGS
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA GCC Compiler Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to build a C, C++ and/or Assembly application
|
||||
# via the AVR-GCC compiler.
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# size - List built application size
|
||||
# symbol-sizes - Print application symbols from the binary ELF
|
||||
# file as a list sorted by size in bytes
|
||||
# all - Build application and list size
|
||||
# elf - Build application ELF debug object file
|
||||
# hex - Build application HEX object files
|
||||
# lss - Build application LSS assembly listing file
|
||||
# clean - Remove output files
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# TARGET - Application name
|
||||
# ARCH - Device architecture name
|
||||
# MCU - Microcontroller device model name
|
||||
# SRC - List of input source files (*.c, *.cpp, *.S)
|
||||
# F_USB - Speed of the input clock of the USB controller
|
||||
# in Hz
|
||||
# LUFA_PATH - Path to the LUFA library core
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# BOARD - LUFA board hardware
|
||||
# OPTIMIZATION - Optimization level
|
||||
# C_STANDARD - C Language Standard to use
|
||||
# CPP_STANDARD - C++ Language Standard to use
|
||||
# F_CPU - Speed of the CPU, in Hz
|
||||
# C_FLAGS - Flags to pass to the C compiler only
|
||||
# CPP_FLAGS - Flags to pass to the C++ compiler only
|
||||
# ASM_FLAGS - Flags to pass to the assembler only
|
||||
# CC_FLAGS - Common flags to pass to the C/C++ compiler and
|
||||
# assembler
|
||||
# LD_FLAGS - Flags to pass to the linker
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
MCU ?= $(error Makefile MCU value not set)
|
||||
TARGET ?= $(error Makefile TARGET value not set)
|
||||
ARCH ?= $(error Makefile ARCH value not set)
|
||||
SRC ?= $(error Makefile SRC value not set)
|
||||
F_USB ?= $(error Makefile F_USB value not set)
|
||||
LUFA_PATH ?= $(error Makefile LUFA_PATH value not set)
|
||||
|
||||
ifeq ($(MCU),)
|
||||
$(error Makefile MCU option cannot be blank)
|
||||
endif
|
||||
ifeq ($(TARGET),)
|
||||
$(error Makefile TARGET option cannot be blank)
|
||||
endif
|
||||
ifeq ($(ARCH),)
|
||||
$(error Makefile ARCH option cannot be blank)
|
||||
endif
|
||||
ifeq ($(F_USB),)
|
||||
$(error Makefile F_USB option cannot be blank)
|
||||
endif
|
||||
|
||||
# Default values of optionally user-supplied variables
|
||||
BOARD ?= NONE
|
||||
OPTIMIZATION ?= s
|
||||
F_CPU ?=
|
||||
C_STANDARD ?= gnu99
|
||||
CPP_STANDARD ?= gnu++98
|
||||
C_FLAGS ?=
|
||||
CPP_FLAGS ?=
|
||||
ASM_FLAGS ?=
|
||||
CC_FLAGS ?=
|
||||
|
||||
# Determine the utility prefix to use for the selected architecture
|
||||
ifeq ($(ARCH), AVR8)
|
||||
CROSS := avr-
|
||||
else ifeq ($(ARCH), XMEGA)
|
||||
CROSS := avr-
|
||||
else ifeq ($(ARCH), UC3)
|
||||
CROSS := avr32-
|
||||
else
|
||||
$(error Unsupported architecture "$(ARCH)".)
|
||||
endif
|
||||
|
||||
# Output Messages
|
||||
MSG_BUILD_BEGIN := Begin compilation of project \"$(TARGET)\"...
|
||||
MSG_BUILD_END := Finished building project \"$(TARGET)\".
|
||||
MSG_COMPILE_CMD := ' [CC] :'
|
||||
MSG_ASSEMBLE_CMD := ' [AS] :'
|
||||
MSG_NM_CMD := ' [NM] :'
|
||||
MSG_REMOVE_CMD := ' [RM] :'
|
||||
MSG_LINKER_CMD := ' [LNK] :'
|
||||
MSG_SIZE_CMD := ' [SIZE] :'
|
||||
MSG_OBJCPY_CMD := ' [OBJCPY] :'
|
||||
MSG_OBJDMP_CMD := ' [OBJDMP] :'
|
||||
|
||||
# Convert input source file list to differentiate them by type
|
||||
C_SOURCE = $(filter %.c, $(SRC))
|
||||
CPP_SOURCE = $(filter %.cpp, $(SRC))
|
||||
ASM_SOURCE = $(filter %.S, $(SRC))
|
||||
|
||||
# Create a list of unknown source file types, if any are found throw an error
|
||||
UNKNOWN_SOURCE = $(filter-out $(C_SOURCE) $(CPP_SOURCE) $(ASM_SOURCE), $(SRC))
|
||||
ifneq ($(UNKNOWN_SOURCE),)
|
||||
$(error Unknown input source formats: $(UNKNOWN_SOURCE))
|
||||
endif
|
||||
|
||||
# Convert input source filenames into a list of required output object files
|
||||
OBJECT_FILES = $(filter %.o, $(C_SOURCE:%.c=%.o) $(CPP_SOURCE:%.cpp=%.o) $(ASM_SOURCE:%.S=%.o))
|
||||
DEPENDENCY_FILES = $(OBJECT_FILES:%.o=%.d)
|
||||
|
||||
# Create a list of common flags to pass to the compiler/linker/assembler
|
||||
BASE_CC_FLAGS :=
|
||||
ifeq ($(ARCH), AVR8)
|
||||
BASE_CC_FLAGS += -mmcu=$(MCU) -gdwarf-2 -fshort-enums -fno-inline-small-functions -fpack-struct
|
||||
else ifeq ($(ARCH), XMEGA)
|
||||
BASE_CC_FLAGS += -mmcu=$(MCU) -gdwarf-2 -fshort-enums -fno-inline-small-functions -fpack-struct
|
||||
else ifeq ($(ARCH), UC3)
|
||||
BASE_CC_FLAGS += -mpart=$(MCU:at32%=%) -g3 -masm-addr-pseudos
|
||||
endif
|
||||
BASE_CC_FLAGS += -Wall -fno-strict-aliasing -funsigned-char -funsigned-bitfields -ffunction-sections
|
||||
BASE_CC_FLAGS += -I. -I$(patsubst %/,%,$(LUFA_PATH))/..
|
||||
BASE_CC_FLAGS += -DARCH=ARCH_$(ARCH) -DBOARD=BOARD_$(BOARD) -DF_USB=$(F_USB)UL
|
||||
ifneq ($(F_CPU),)
|
||||
BASE_CC_FLAGS += -DF_CPU=$(F_CPU)UL
|
||||
endif
|
||||
|
||||
# Additional language specific compiler flags
|
||||
BASE_C_FLAGS := -x c -O$(OPTIMIZATION) -std=$(C_STANDARD) -Wstrict-prototypes
|
||||
BASE_CPP_FLAGS := -x c++ -O$(OPTIMIZATION) -std=$(CPP_STANDARD)
|
||||
BASE_ASM_FLAGS := -x assembler-with-cpp
|
||||
|
||||
# Create a list of flags to pass to the linker
|
||||
BASE_LD_FLAGS := -lm -Wl,-Map=$(TARGET).map,--cref -Wl,--gc-sections
|
||||
ifeq ($(ARCH), UC3)
|
||||
BASE_LD_FLAGS += --rodata-writable --direct-data
|
||||
else
|
||||
BASE_LD_FLAGS += -Wl,--relax
|
||||
endif
|
||||
|
||||
# Determine flags to pass to the size utility based on its reported features
|
||||
SIZE_MCU_FLAG := $(shell $(CROSS)size --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
|
||||
SIZE_FORMAT_FLAG := $(shell $(CROSS)size --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
|
||||
|
||||
|
||||
begin:
|
||||
@echo ""
|
||||
@echo $(MSG_BUILD_BEGIN)
|
||||
@echo ""
|
||||
|
||||
end:
|
||||
@echo ""
|
||||
@echo $(MSG_BUILD_END)
|
||||
@echo ""
|
||||
|
||||
gcc_version:
|
||||
@$(CROSS)gcc --version
|
||||
|
||||
check_source:
|
||||
@for f in $(SRC); do \
|
||||
if [ ! -f $$f ]; then \
|
||||
echo "Error: Source file not found: $$f"; \
|
||||
exit 1; \
|
||||
fi; \
|
||||
done
|
||||
|
||||
size: $(TARGET).elf
|
||||
@echo $(MSG_SIZE_CMD) Determining size of \"$<\"
|
||||
@if test -f $(TARGET).elf; then \
|
||||
$(CROSS)size $(SIZE_MCU_FLAG) $(SIZE_FORMAT_FLAG) $< ; 2>/dev/null; \
|
||||
fi
|
||||
|
||||
symbol-sizes: $(TARGET).elf
|
||||
@echo $(MSG_NM_CMD) Extracting \"$<\" symbols with decimal byte sizes
|
||||
avr-nm --size-sort --demangle --radix=d $<
|
||||
|
||||
clean:
|
||||
@echo $(MSG_REMOVE_CMD) Removing object files of \"$(TARGET)\"
|
||||
rm -f $(OBJECT_FILES)
|
||||
@echo $(MSG_REMOVE_CMD) Removing dependency files of \"$(TARGET)\"
|
||||
rm -f $(DEPENDENCY_FILES)
|
||||
@echo $(MSG_REMOVE_CMD) Removing output files of \"$(TARGET)\"
|
||||
rm -f $(TARGET).elf $(TARGET).hex $(TARGET).eep $(TARGET).map $(TARGET).lss
|
||||
|
||||
all: begin check_source gcc_version elf hex lss size end
|
||||
|
||||
elf: $(TARGET).elf
|
||||
hex: $(TARGET).hex $(TARGET).eep
|
||||
lss: $(TARGET).lss
|
||||
|
||||
%.o: %.c $(MAKEFILE_LIST)
|
||||
@echo $(MSG_COMPILE_CMD) Compiling C file \"$<\"
|
||||
$(CROSS)gcc -c $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
|
||||
|
||||
%.o: %.cpp $(MAKEFILE_LIST)
|
||||
@echo $(MSG_COMPILE_CMD) Compiling C++ file \"$<\"
|
||||
$(CROSS)gcc -c $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
|
||||
|
||||
%.o: %.S $(MAKEFILE_LIST)
|
||||
@echo $(MSG_ASSEMBLE_CMD) Assembling \"$<\"
|
||||
$(CROSS)gcc -c $(BASE_CC_FLAGS) $(BASE_ASM_FLAGS) $(CC_FLAGS) $(ASM_FLAGS) $< -o $@
|
||||
|
||||
.PRECIOUS : $(OBJECT_FILES)
|
||||
%.elf: $(OBJECT_FILES)
|
||||
@echo $(MSG_LINKER_CMD) Linking object files into \"$@\"
|
||||
$(CROSS)gcc $(BASE_CC_FLAGS) $(BASE_LD_FLAGS) $(CC_FLAGS) $(LD_FLAGS) $^ -o $@
|
||||
|
||||
%.hex: %.elf
|
||||
@echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$<\"
|
||||
$(CROSS)objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature $< $@
|
||||
|
||||
%.eep: %.elf
|
||||
@echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$<\"
|
||||
$(CROSS)objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ihex $< $@ || exit 0
|
||||
|
||||
%.lss: %.elf
|
||||
@echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$<\"
|
||||
$(CROSS)objdump -h -S -z $< > $@
|
||||
|
||||
# Include build dependency files
|
||||
-include $(DEPENDENCY_FILES)
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: begin end gcc_version check_source size symbol-sizes elf hex lss clean
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += BUILD
|
||||
LUFA_BUILD_TARGETS += size symbol-sizes all elf hex lss clean
|
||||
LUFA_BUILD_MANDATORY_VARS += TARGET ARCH MCU SRC F_USB LUFA_PATH
|
||||
LUFA_BUILD_OPTIONAL_VARS += BOARD OPTIMIZATION C_STANDARD CPP_STANDARD F_CPU C_FLAGS CPP_FLAGS ASM_FLAGS CC_FLAGS LD_FLAGS
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA GCC Compiler Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to build a C, C++ and/or Assembly application
|
||||
# via the AVR-GCC compiler.
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# size - List built application size
|
||||
# symbol-sizes - Print application symbols from the binary ELF
|
||||
# file as a list sorted by size in bytes
|
||||
# all - Build application and list size
|
||||
# elf - Build application ELF debug object file
|
||||
# hex - Build application HEX object files
|
||||
# lss - Build application LSS assembly listing file
|
||||
# clean - Remove output files
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# TARGET - Application name
|
||||
# ARCH - Device architecture name
|
||||
# MCU - Microcontroller device model name
|
||||
# SRC - List of input source files (*.c, *.cpp, *.S)
|
||||
# F_USB - Speed of the input clock of the USB controller
|
||||
# in Hz
|
||||
# LUFA_PATH - Path to the LUFA library core
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# BOARD - LUFA board hardware
|
||||
# OPTIMIZATION - Optimization level
|
||||
# C_STANDARD - C Language Standard to use
|
||||
# CPP_STANDARD - C++ Language Standard to use
|
||||
# F_CPU - Speed of the CPU, in Hz
|
||||
# C_FLAGS - Flags to pass to the C compiler only
|
||||
# CPP_FLAGS - Flags to pass to the C++ compiler only
|
||||
# ASM_FLAGS - Flags to pass to the assembler only
|
||||
# CC_FLAGS - Common flags to pass to the C/C++ compiler and
|
||||
# assembler
|
||||
# LD_FLAGS - Flags to pass to the linker
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
MCU ?= $(error Makefile MCU value not set)
|
||||
TARGET ?= $(error Makefile TARGET value not set)
|
||||
ARCH ?= $(error Makefile ARCH value not set)
|
||||
SRC ?= $(error Makefile SRC value not set)
|
||||
F_USB ?= $(error Makefile F_USB value not set)
|
||||
LUFA_PATH ?= $(error Makefile LUFA_PATH value not set)
|
||||
|
||||
ifeq ($(MCU),)
|
||||
$(error Makefile MCU option cannot be blank)
|
||||
endif
|
||||
ifeq ($(TARGET),)
|
||||
$(error Makefile TARGET option cannot be blank)
|
||||
endif
|
||||
ifeq ($(ARCH),)
|
||||
$(error Makefile ARCH option cannot be blank)
|
||||
endif
|
||||
ifeq ($(F_USB),)
|
||||
$(error Makefile F_USB option cannot be blank)
|
||||
endif
|
||||
|
||||
# Default values of optionally user-supplied variables
|
||||
BOARD ?= NONE
|
||||
OPTIMIZATION ?= s
|
||||
F_CPU ?=
|
||||
C_STANDARD ?= gnu99
|
||||
CPP_STANDARD ?= gnu++98
|
||||
C_FLAGS ?=
|
||||
CPP_FLAGS ?=
|
||||
ASM_FLAGS ?=
|
||||
CC_FLAGS ?=
|
||||
|
||||
# Determine the utility prefix to use for the selected architecture
|
||||
ifeq ($(ARCH), AVR8)
|
||||
CROSS := avr-
|
||||
else ifeq ($(ARCH), XMEGA)
|
||||
CROSS := avr-
|
||||
else ifeq ($(ARCH), UC3)
|
||||
CROSS := avr32-
|
||||
else
|
||||
$(error Unsupported architecture "$(ARCH)".)
|
||||
endif
|
||||
|
||||
# Output Messages
|
||||
MSG_BUILD_BEGIN := Begin compilation of project \"$(TARGET)\"...
|
||||
MSG_BUILD_END := Finished building project \"$(TARGET)\".
|
||||
MSG_COMPILE_CMD := ' [CC] :'
|
||||
MSG_ASSEMBLE_CMD := ' [AS] :'
|
||||
MSG_NM_CMD := ' [NM] :'
|
||||
MSG_REMOVE_CMD := ' [RM] :'
|
||||
MSG_LINKER_CMD := ' [LNK] :'
|
||||
MSG_SIZE_CMD := ' [SIZE] :'
|
||||
MSG_OBJCPY_CMD := ' [OBJCPY] :'
|
||||
MSG_OBJDMP_CMD := ' [OBJDMP] :'
|
||||
|
||||
# Convert input source file list to differentiate them by type
|
||||
C_SOURCE = $(filter %.c, $(SRC))
|
||||
CPP_SOURCE = $(filter %.cpp, $(SRC))
|
||||
ASM_SOURCE = $(filter %.S, $(SRC))
|
||||
|
||||
# Create a list of unknown source file types, if any are found throw an error
|
||||
UNKNOWN_SOURCE = $(filter-out $(C_SOURCE) $(CPP_SOURCE) $(ASM_SOURCE), $(SRC))
|
||||
ifneq ($(UNKNOWN_SOURCE),)
|
||||
$(error Unknown input source formats: $(UNKNOWN_SOURCE))
|
||||
endif
|
||||
|
||||
# Convert input source filenames into a list of required output object files
|
||||
OBJECT_FILES = $(filter %.o, $(C_SOURCE:%.c=%.o) $(CPP_SOURCE:%.cpp=%.o) $(ASM_SOURCE:%.S=%.o))
|
||||
DEPENDENCY_FILES = $(OBJECT_FILES:%.o=%.d)
|
||||
|
||||
# Create a list of common flags to pass to the compiler/linker/assembler
|
||||
BASE_CC_FLAGS :=
|
||||
ifeq ($(ARCH), AVR8)
|
||||
BASE_CC_FLAGS += -mmcu=$(MCU) -gdwarf-2 -fshort-enums -fno-inline-small-functions -fpack-struct
|
||||
else ifeq ($(ARCH), XMEGA)
|
||||
BASE_CC_FLAGS += -mmcu=$(MCU) -gdwarf-2 -fshort-enums -fno-inline-small-functions -fpack-struct
|
||||
else ifeq ($(ARCH), UC3)
|
||||
BASE_CC_FLAGS += -mpart=$(MCU:at32%=%) -g3 -masm-addr-pseudos
|
||||
endif
|
||||
BASE_CC_FLAGS += -Wall -fno-strict-aliasing -funsigned-char -funsigned-bitfields -ffunction-sections
|
||||
BASE_CC_FLAGS += -I. -I$(patsubst %/,%,$(LUFA_PATH))/..
|
||||
BASE_CC_FLAGS += -DARCH=ARCH_$(ARCH) -DBOARD=BOARD_$(BOARD) -DF_USB=$(F_USB)UL
|
||||
ifneq ($(F_CPU),)
|
||||
BASE_CC_FLAGS += -DF_CPU=$(F_CPU)UL
|
||||
endif
|
||||
|
||||
# Additional language specific compiler flags
|
||||
BASE_C_FLAGS := -x c -O$(OPTIMIZATION) -std=$(C_STANDARD) -Wstrict-prototypes
|
||||
BASE_CPP_FLAGS := -x c++ -O$(OPTIMIZATION) -std=$(CPP_STANDARD)
|
||||
BASE_ASM_FLAGS := -x assembler-with-cpp
|
||||
|
||||
# Create a list of flags to pass to the linker
|
||||
BASE_LD_FLAGS := -lm -Wl,-Map=$(TARGET).map,--cref -Wl,--gc-sections
|
||||
ifeq ($(ARCH), UC3)
|
||||
BASE_LD_FLAGS += --rodata-writable --direct-data
|
||||
else
|
||||
BASE_LD_FLAGS += -Wl,--relax
|
||||
endif
|
||||
|
||||
# Determine flags to pass to the size utility based on its reported features
|
||||
SIZE_MCU_FLAG := $(shell $(CROSS)size --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
|
||||
SIZE_FORMAT_FLAG := $(shell $(CROSS)size --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
|
||||
|
||||
|
||||
begin:
|
||||
@echo ""
|
||||
@echo $(MSG_BUILD_BEGIN)
|
||||
@echo ""
|
||||
|
||||
end:
|
||||
@echo ""
|
||||
@echo $(MSG_BUILD_END)
|
||||
@echo ""
|
||||
|
||||
gcc_version:
|
||||
@$(CROSS)gcc --version
|
||||
|
||||
check_source:
|
||||
@for f in $(SRC); do \
|
||||
if [ ! -f $$f ]; then \
|
||||
echo "Error: Source file not found: $$f"; \
|
||||
exit 1; \
|
||||
fi; \
|
||||
done
|
||||
|
||||
size: $(TARGET).elf
|
||||
@echo $(MSG_SIZE_CMD) Determining size of \"$<\"
|
||||
@if test -f $(TARGET).elf; then \
|
||||
$(CROSS)size $(SIZE_MCU_FLAG) $(SIZE_FORMAT_FLAG) $< ; 2>/dev/null; \
|
||||
fi
|
||||
|
||||
symbol-sizes: $(TARGET).elf
|
||||
@echo $(MSG_NM_CMD) Extracting \"$<\" symbols with decimal byte sizes
|
||||
avr-nm --size-sort --demangle --radix=d $<
|
||||
|
||||
clean:
|
||||
@echo $(MSG_REMOVE_CMD) Removing object files of \"$(TARGET)\"
|
||||
rm -f $(OBJECT_FILES)
|
||||
@echo $(MSG_REMOVE_CMD) Removing dependency files of \"$(TARGET)\"
|
||||
rm -f $(DEPENDENCY_FILES)
|
||||
@echo $(MSG_REMOVE_CMD) Removing output files of \"$(TARGET)\"
|
||||
rm -f $(TARGET).elf $(TARGET).hex $(TARGET).eep $(TARGET).map $(TARGET).lss
|
||||
|
||||
all: begin check_source gcc_version elf hex lss size end
|
||||
|
||||
elf: $(TARGET).elf
|
||||
hex: $(TARGET).hex $(TARGET).eep
|
||||
lss: $(TARGET).lss
|
||||
|
||||
%.o: %.c $(MAKEFILE_LIST)
|
||||
@echo $(MSG_COMPILE_CMD) Compiling C file \"$<\"
|
||||
$(CROSS)gcc -c $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
|
||||
|
||||
%.o: %.cpp $(MAKEFILE_LIST)
|
||||
@echo $(MSG_COMPILE_CMD) Compiling C++ file \"$<\"
|
||||
$(CROSS)gcc -c $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
|
||||
|
||||
%.o: %.S $(MAKEFILE_LIST)
|
||||
@echo $(MSG_ASSEMBLE_CMD) Assembling \"$<\"
|
||||
$(CROSS)gcc -c $(BASE_CC_FLAGS) $(BASE_ASM_FLAGS) $(CC_FLAGS) $(ASM_FLAGS) $< -o $@
|
||||
|
||||
.PRECIOUS : $(OBJECT_FILES)
|
||||
%.elf: $(OBJECT_FILES)
|
||||
@echo $(MSG_LINKER_CMD) Linking object files into \"$@\"
|
||||
$(CROSS)gcc $(BASE_CC_FLAGS) $(BASE_LD_FLAGS) $(CC_FLAGS) $(LD_FLAGS) $^ -o $@
|
||||
|
||||
%.hex: %.elf
|
||||
@echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$<\"
|
||||
$(CROSS)objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature $< $@
|
||||
|
||||
%.eep: %.elf
|
||||
@echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$<\"
|
||||
$(CROSS)objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ihex $< $@ || exit 0
|
||||
|
||||
%.lss: %.elf
|
||||
@echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$<\"
|
||||
$(CROSS)objdump -h -S -z $< > $@
|
||||
|
||||
# Include build dependency files
|
||||
-include $(DEPENDENCY_FILES)
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: begin end gcc_version check_source size symbol-sizes elf hex lss clean
|
||||
|
||||
@ -1,109 +1,109 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += CORE
|
||||
LUFA_BUILD_TARGETS += help list_targets list_modules list_mandatory list_optional
|
||||
LUFA_BUILD_MANDATORY_VARS +=
|
||||
LUFA_BUILD_OPTIONAL_VARS +=
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA Core Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of core build targets for the LUFA buildsystem
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# help - Build system help
|
||||
# list_targets - List all build targets
|
||||
# list_modules - List all build modules
|
||||
# list_mandatory - List all mandatory make variables required by
|
||||
# the included build modules of the application
|
||||
# list_optional - List all optional make variables required by
|
||||
# the included build modules of the application
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Build sorted and filtered lists of the included build module data
|
||||
SORTED_LUFA_BUILD_MODULES = $(sort $(LUFA_BUILD_MODULES))
|
||||
SORTED_LUFA_BUILD_TARGETS = $(sort $(LUFA_BUILD_TARGETS))
|
||||
SORTED_LUFA_MANDATORY_VARS = $(sort $(LUFA_BUILD_MANDATORY_VARS))
|
||||
SORTED_LUFA_OPTIONAL_VARS = $(filter-out $(SORTED_LUFA_MANDATORY_VARS), $(sort $(LUFA_BUILD_OPTIONAL_VARS)))
|
||||
|
||||
help:
|
||||
@echo "==================================================================="
|
||||
@echo " LUFA Build System 2.0 "
|
||||
@echo " (C) Dean Camera, 2012 { dean @ fourwalledcubicle . com } "
|
||||
@echo "==================================================================="
|
||||
@echo "DESCRIPTION: "
|
||||
@echo " This build system is a set of makefile modules for (GNU) Make, to "
|
||||
@echo " provide a simple system for building LUFA powered applications. "
|
||||
@echo " Each makefile module can be included from within a user makefile, "
|
||||
@echo " to expose the build rules documented in the comments at the top of"
|
||||
@echo " each build module. "
|
||||
@echo " "
|
||||
@echo "USAGE: "
|
||||
@echo " To execute a rule, define all variables indicated in the desired "
|
||||
@echo " module as a required parameter before including the build module "
|
||||
@echo " in your project makefile. Parameters marked as optional will "
|
||||
@echo " assume a default value in the modules if not user-assigned. "
|
||||
@echo " "
|
||||
@echo " By default the target output shows both a friendly summary, as "
|
||||
@echo " well as the actual invoked command. To suppress the output of the "
|
||||
@echo " invoked commands and show only the friendly command output, run "
|
||||
@echo " make with the \"-s\" switch added before the target(s). "
|
||||
@echo "==================================================================="
|
||||
@echo " Currently used build system modules in this application: "
|
||||
@echo " "
|
||||
@printf " %b" "$(SORTED_LUFA_BUILD_MODULES:%= - %\n)"
|
||||
@echo " "
|
||||
@echo " "
|
||||
@echo " Currently available build targets in this application: "
|
||||
@echo " "
|
||||
@printf " %b" "$(SORTED_LUFA_BUILD_TARGETS:%= - %\n)"
|
||||
@echo " "
|
||||
@echo " "
|
||||
@echo " Mandatory variables required by the selected build Modules: "
|
||||
@echo " "
|
||||
@printf " %b" "$(SORTED_LUFA_MANDATORY_VARS:%= - %\n)"
|
||||
@echo " "
|
||||
@echo " "
|
||||
@echo " Optional variables required by the selected build Modules: "
|
||||
@echo " "
|
||||
@printf " %b" "$(SORTED_LUFA_OPTIONAL_VARS:%= - %\n)"
|
||||
@echo " "
|
||||
@echo "==================================================================="
|
||||
@echo " The LUFA BuildSystem 2.0 - Powered By Unicorns (tm) "
|
||||
@echo "==================================================================="
|
||||
|
||||
list_modules:
|
||||
@echo Currently Used Build System Modules: $(SORTED_LUFA_BUILD_MODULES)
|
||||
|
||||
list_targets:
|
||||
@echo Currently Available Build Targets: $(SORTED_LUFA_BUILD_TARGETS)
|
||||
|
||||
list_mandatory:
|
||||
@echo Mandatory Variables for Included Modules: $(SORTED_LUFA_MANDATORY_VARS)
|
||||
|
||||
list_optional:
|
||||
@echo Optional Variables for Included Modules: $(SORTED_LUFA_OPTIONAL_VARS)
|
||||
|
||||
# Disable default in-built make rules (those that are needed are explicitly
|
||||
# defined, and doing so has performance benefits when recursively building)
|
||||
.SUFFIXES:
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: help list_modules list_targets list_mandatory list_optional
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += CORE
|
||||
LUFA_BUILD_TARGETS += help list_targets list_modules list_mandatory list_optional
|
||||
LUFA_BUILD_MANDATORY_VARS +=
|
||||
LUFA_BUILD_OPTIONAL_VARS +=
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA Core Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of core build targets for the LUFA buildsystem
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# help - Build system help
|
||||
# list_targets - List all build targets
|
||||
# list_modules - List all build modules
|
||||
# list_mandatory - List all mandatory make variables required by
|
||||
# the included build modules of the application
|
||||
# list_optional - List all optional make variables required by
|
||||
# the included build modules of the application
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Build sorted and filtered lists of the included build module data
|
||||
SORTED_LUFA_BUILD_MODULES = $(sort $(LUFA_BUILD_MODULES))
|
||||
SORTED_LUFA_BUILD_TARGETS = $(sort $(LUFA_BUILD_TARGETS))
|
||||
SORTED_LUFA_MANDATORY_VARS = $(sort $(LUFA_BUILD_MANDATORY_VARS))
|
||||
SORTED_LUFA_OPTIONAL_VARS = $(filter-out $(SORTED_LUFA_MANDATORY_VARS), $(sort $(LUFA_BUILD_OPTIONAL_VARS)))
|
||||
|
||||
help:
|
||||
@echo "==================================================================="
|
||||
@echo " LUFA Build System 2.0 "
|
||||
@echo " (C) Dean Camera, 2012 { dean @ fourwalledcubicle . com } "
|
||||
@echo "==================================================================="
|
||||
@echo "DESCRIPTION: "
|
||||
@echo " This build system is a set of makefile modules for (GNU) Make, to "
|
||||
@echo " provide a simple system for building LUFA powered applications. "
|
||||
@echo " Each makefile module can be included from within a user makefile, "
|
||||
@echo " to expose the build rules documented in the comments at the top of"
|
||||
@echo " each build module. "
|
||||
@echo " "
|
||||
@echo "USAGE: "
|
||||
@echo " To execute a rule, define all variables indicated in the desired "
|
||||
@echo " module as a required parameter before including the build module "
|
||||
@echo " in your project makefile. Parameters marked as optional will "
|
||||
@echo " assume a default value in the modules if not user-assigned. "
|
||||
@echo " "
|
||||
@echo " By default the target output shows both a friendly summary, as "
|
||||
@echo " well as the actual invoked command. To suppress the output of the "
|
||||
@echo " invoked commands and show only the friendly command output, run "
|
||||
@echo " make with the \"-s\" switch added before the target(s). "
|
||||
@echo "==================================================================="
|
||||
@echo " Currently used build system modules in this application: "
|
||||
@echo " "
|
||||
@printf " %b" "$(SORTED_LUFA_BUILD_MODULES:%= - %\n)"
|
||||
@echo " "
|
||||
@echo " "
|
||||
@echo " Currently available build targets in this application: "
|
||||
@echo " "
|
||||
@printf " %b" "$(SORTED_LUFA_BUILD_TARGETS:%= - %\n)"
|
||||
@echo " "
|
||||
@echo " "
|
||||
@echo " Mandatory variables required by the selected build Modules: "
|
||||
@echo " "
|
||||
@printf " %b" "$(SORTED_LUFA_MANDATORY_VARS:%= - %\n)"
|
||||
@echo " "
|
||||
@echo " "
|
||||
@echo " Optional variables required by the selected build Modules: "
|
||||
@echo " "
|
||||
@printf " %b" "$(SORTED_LUFA_OPTIONAL_VARS:%= - %\n)"
|
||||
@echo " "
|
||||
@echo "==================================================================="
|
||||
@echo " The LUFA BuildSystem 2.0 - Powered By Unicorns (tm) "
|
||||
@echo "==================================================================="
|
||||
|
||||
list_modules:
|
||||
@echo Currently Used Build System Modules: $(SORTED_LUFA_BUILD_MODULES)
|
||||
|
||||
list_targets:
|
||||
@echo Currently Available Build Targets: $(SORTED_LUFA_BUILD_TARGETS)
|
||||
|
||||
list_mandatory:
|
||||
@echo Mandatory Variables for Included Modules: $(SORTED_LUFA_MANDATORY_VARS)
|
||||
|
||||
list_optional:
|
||||
@echo Optional Variables for Included Modules: $(SORTED_LUFA_OPTIONAL_VARS)
|
||||
|
||||
# Disable default in-built make rules (those that are needed are explicitly
|
||||
# defined, and doing so has performance benefits when recursively building)
|
||||
.SUFFIXES:
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: help list_modules list_targets list_mandatory list_optional
|
||||
|
||||
@ -1,88 +1,88 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += CPPCHECK
|
||||
LUFA_BUILD_TARGETS += cppcheck cppcheck-config
|
||||
LUFA_BUILD_MANDATORY_VARS +=
|
||||
LUFA_BUILD_OPTIONAL_VARS += CPPCHECK_PATH CPPCHECK_INCLUDES CPPCHECK_EXCLUDES CPPCHECK_MSG_TEMPLATE \
|
||||
CPPCHECK_ENABLE CPPCHECK_SUPPRESS CPPCHECK_FAIL_ON_WARNING CPPCHECK_QUIET \
|
||||
CPPCHECK_FLAGS
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA CPPCheck Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to scan a project with the free "cppcheck" static
|
||||
# analysis tool, to check for code errors at runtime (see http://cppcheck.sourceforge.net).
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# cppcheck - Scan the project with CPPCheck
|
||||
# cppcheck-config - Use CPPCheck to look for missing include files
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# CPPCHECK_PATH - Path of the files to statically analyze
|
||||
# CPPCHECK_INCLUDES - Extra include paths to search for missing
|
||||
# header files
|
||||
# CPPCHECK_EXCLUDES - Source file paths to exclude checking (can be
|
||||
# a path fragment if desired)
|
||||
# CPPCHECK_MSG_TEMPLATE - Template for cppcheck error and warning output
|
||||
# CPPCHECK_ENABLE - General cppcheck category checks to enable
|
||||
# CPPCHECK_SUPPRESS - Specific cppcheck warnings to disable by ID
|
||||
# CPPCHECK_FAIL_ON_WARNING - Set to Y to fail the build on cppcheck
|
||||
# warnings, N to continue even if warnings occur
|
||||
# CPPCHECK_QUIET - Enable cppcheck verbose or quiet output mode
|
||||
# CPPCHECK_FLAGS - Additional flags to pass to cppcheck
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Default values of optionally user-supplied variables
|
||||
CPPCHECK_PATH ?= .
|
||||
CPPCHECK_INCLUDES ?=
|
||||
CPPCHECK_EXCLUDES ?=
|
||||
CPPCHECK_MSG_TEMPLATE ?= {file}:{line}: {severity} ({id}): {message}
|
||||
CPPCHECK_ENABLE ?= all
|
||||
CPPCHECK_SUPPRESS ?= variableScope missingInclude
|
||||
CPPCHECK_FAIL_ON_WARNING ?= Y
|
||||
CPPCHECK_QUIET ?= Y
|
||||
CPPCHECK_FLAGS ?=
|
||||
|
||||
# Build a default argument list for cppcheck
|
||||
BASE_CPPCHECK_FLAGS := --template="$(CPPCHECK_MSG_TEMPLATE)" $(CPPCHECK_INCLUDES:%=-I%) $(CPPCHECK_EXCLUDES:%=-i%) --inline-suppr --force --std=c99
|
||||
|
||||
# Sanity check parameters and construct additional command line arguments to cppcheck
|
||||
|
||||
ifeq ($(CPPCHECK_FAIL_ON_WARNING), Y)
|
||||
BASE_CPPCHECK_FLAGS += --error-exitcode=1
|
||||
else ifneq ($(CPPCHECK_FAIL_ON_WARNING), N)
|
||||
$(error CPPCHECK_FAIL_ON_WARNING must be Y or N)
|
||||
endif
|
||||
ifeq ($(CPPCHECK_QUIET), Y)
|
||||
BASE_CPPCHECK_FLAGS += --quiet
|
||||
else ifneq ($(CPPCHECK_QUIET), N)
|
||||
$(error CPPCHECK_QUIET must be Y or N)
|
||||
endif
|
||||
|
||||
# Output Messages
|
||||
MSG_CPPCHECK_CMD := ' [CPPCHECK]:'
|
||||
|
||||
cppcheck-config:
|
||||
@echo $(MSG_CPPCHECK_CMD) Checking cppcheck configuration for path \"$(CPPCHECK_PATH)\"
|
||||
cppcheck $(BASE_CPPCHECK_FLAGS) --check-config $(CPPCHECK_FLAGS) $(CPPCHECK_PATH)
|
||||
|
||||
cppcheck:
|
||||
@echo $(MSG_CPPCHECK_CMD) Performing cppcheck analysis on path \"$(CPPCHECK_PATH)\"
|
||||
cppcheck $(BASE_CPPCHECK_FLAGS) --enable=$(CPPCHECK_ENABLE) $(CPPCHECK_SUPPRESS:%=--suppress=%) $(CPPCHECK_FLAGS) $(CPPCHECK_PATH)
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: cppcheck-config cppcheck
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += CPPCHECK
|
||||
LUFA_BUILD_TARGETS += cppcheck cppcheck-config
|
||||
LUFA_BUILD_MANDATORY_VARS +=
|
||||
LUFA_BUILD_OPTIONAL_VARS += CPPCHECK_PATH CPPCHECK_INCLUDES CPPCHECK_EXCLUDES CPPCHECK_MSG_TEMPLATE \
|
||||
CPPCHECK_ENABLE CPPCHECK_SUPPRESS CPPCHECK_FAIL_ON_WARNING CPPCHECK_QUIET \
|
||||
CPPCHECK_FLAGS
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA CPPCheck Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to scan a project with the free "cppcheck" static
|
||||
# analysis tool, to check for code errors at runtime (see http://cppcheck.sourceforge.net).
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# cppcheck - Scan the project with CPPCheck
|
||||
# cppcheck-config - Use CPPCheck to look for missing include files
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# CPPCHECK_PATH - Path of the files to statically analyze
|
||||
# CPPCHECK_INCLUDES - Extra include paths to search for missing
|
||||
# header files
|
||||
# CPPCHECK_EXCLUDES - Source file paths to exclude checking (can be
|
||||
# a path fragment if desired)
|
||||
# CPPCHECK_MSG_TEMPLATE - Template for cppcheck error and warning output
|
||||
# CPPCHECK_ENABLE - General cppcheck category checks to enable
|
||||
# CPPCHECK_SUPPRESS - Specific cppcheck warnings to disable by ID
|
||||
# CPPCHECK_FAIL_ON_WARNING - Set to Y to fail the build on cppcheck
|
||||
# warnings, N to continue even if warnings occur
|
||||
# CPPCHECK_QUIET - Enable cppcheck verbose or quiet output mode
|
||||
# CPPCHECK_FLAGS - Additional flags to pass to cppcheck
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Default values of optionally user-supplied variables
|
||||
CPPCHECK_PATH ?= .
|
||||
CPPCHECK_INCLUDES ?=
|
||||
CPPCHECK_EXCLUDES ?=
|
||||
CPPCHECK_MSG_TEMPLATE ?= {file}:{line}: {severity} ({id}): {message}
|
||||
CPPCHECK_ENABLE ?= all
|
||||
CPPCHECK_SUPPRESS ?= variableScope missingInclude
|
||||
CPPCHECK_FAIL_ON_WARNING ?= Y
|
||||
CPPCHECK_QUIET ?= Y
|
||||
CPPCHECK_FLAGS ?=
|
||||
|
||||
# Build a default argument list for cppcheck
|
||||
BASE_CPPCHECK_FLAGS := --template="$(CPPCHECK_MSG_TEMPLATE)" $(CPPCHECK_INCLUDES:%=-I%) $(CPPCHECK_EXCLUDES:%=-i%) --inline-suppr --force --std=c99
|
||||
|
||||
# Sanity check parameters and construct additional command line arguments to cppcheck
|
||||
|
||||
ifeq ($(CPPCHECK_FAIL_ON_WARNING), Y)
|
||||
BASE_CPPCHECK_FLAGS += --error-exitcode=1
|
||||
else ifneq ($(CPPCHECK_FAIL_ON_WARNING), N)
|
||||
$(error CPPCHECK_FAIL_ON_WARNING must be Y or N)
|
||||
endif
|
||||
ifeq ($(CPPCHECK_QUIET), Y)
|
||||
BASE_CPPCHECK_FLAGS += --quiet
|
||||
else ifneq ($(CPPCHECK_QUIET), N)
|
||||
$(error CPPCHECK_QUIET must be Y or N)
|
||||
endif
|
||||
|
||||
# Output Messages
|
||||
MSG_CPPCHECK_CMD := ' [CPPCHECK]:'
|
||||
|
||||
cppcheck-config:
|
||||
@echo $(MSG_CPPCHECK_CMD) Checking cppcheck configuration for path \"$(CPPCHECK_PATH)\"
|
||||
cppcheck $(BASE_CPPCHECK_FLAGS) --check-config $(CPPCHECK_FLAGS) $(CPPCHECK_PATH)
|
||||
|
||||
cppcheck:
|
||||
@echo $(MSG_CPPCHECK_CMD) Performing cppcheck analysis on path \"$(CPPCHECK_PATH)\"
|
||||
cppcheck $(BASE_CPPCHECK_FLAGS) --enable=$(CPPCHECK_ENABLE) $(CPPCHECK_SUPPRESS:%=--suppress=%) $(CPPCHECK_FLAGS) $(CPPCHECK_PATH)
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: cppcheck-config cppcheck
|
||||
|
||||
@ -1,83 +1,83 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += DFU
|
||||
LUFA_BUILD_TARGETS += flip flip-ee dfu dfu-ee
|
||||
LUFA_BUILD_MANDATORY_VARS += MCU TARGET
|
||||
LUFA_BUILD_OPTIONAL_VARS +=
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA DFU Bootloader Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to re-program a device currently running a DFU
|
||||
# class bootloader with a project's FLASH and EEPROM files.
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# flip - Program FLASH into target via Atmel FLIP
|
||||
# flip-ee - Program EEPROM into target via Atmel FLIP
|
||||
# dfu - Program FLASH into target via dfu-programmer
|
||||
# dfu-ee - Program EEPROM into target via dfu-programmer
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# MCU - Microcontroller device model name
|
||||
# TARGET - Application name
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
MCU ?= $(error Makefile MCU value not set)
|
||||
TARGET ?= $(error Makefile TARGET value not set)
|
||||
|
||||
ifeq ($(MCU),)
|
||||
$(error Makefile MCU option cannot be blank)
|
||||
endif
|
||||
ifeq ($(TARGET),)
|
||||
$(error Makefile TARGET option cannot be blank)
|
||||
endif
|
||||
|
||||
# Output Messages
|
||||
MSG_COPY_CMD := ' [CP] :'
|
||||
MSG_REMOVE_CMD := ' [RM] :'
|
||||
MSG_DFU_CMD := ' [DFU] :'
|
||||
|
||||
flip: $(TARGET).hex $(MAKEFILE_LIST)
|
||||
@echo $(MSG_DFU_CMD) Programming FLASH with batchisp using \"$<\"
|
||||
batchisp -hardware usb -device $(MCU) -operation erase f
|
||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $< program
|
||||
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
||||
|
||||
flip-ee: $(TARGET).eep $(MAKEFILE_LIST)
|
||||
@echo $(MSG_DFU_CMD) Copying EEP file to temporary file \"$<.hex\"
|
||||
cp $< $<.hex
|
||||
@echo $(MSG_DFU_CMD) Programming EEPROM with batchisp using \"$<.hex\"
|
||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
|
||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $<.hex program
|
||||
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
||||
@echo $(MSG_DFU_CMD) Removing temporary file \"$<.hex\"
|
||||
rm $<.hex
|
||||
|
||||
dfu: $(TARGET).hex $(MAKEFILE_LIST)
|
||||
@echo $(MSG_DFU_CMD) Programming FLASH with dfu-programmer using \"$<\"
|
||||
dfu-programmer $(MCU) erase
|
||||
dfu-programmer $(MCU) flash $<
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
dfu-ee: $(TARGET).eep $(MAKEFILE_LIST)
|
||||
@echo $(MSG_DFU_CMD) Programming EEPROM with dfu-programmer using \"$<\"
|
||||
dfu-programmer $(MCU) eeprom-flash $<
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: flip flip-ee dfu dfu-ee
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += DFU
|
||||
LUFA_BUILD_TARGETS += flip flip-ee dfu dfu-ee
|
||||
LUFA_BUILD_MANDATORY_VARS += MCU TARGET
|
||||
LUFA_BUILD_OPTIONAL_VARS +=
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA DFU Bootloader Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to re-program a device currently running a DFU
|
||||
# class bootloader with a project's FLASH and EEPROM files.
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# flip - Program FLASH into target via Atmel FLIP
|
||||
# flip-ee - Program EEPROM into target via Atmel FLIP
|
||||
# dfu - Program FLASH into target via dfu-programmer
|
||||
# dfu-ee - Program EEPROM into target via dfu-programmer
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# MCU - Microcontroller device model name
|
||||
# TARGET - Application name
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
MCU ?= $(error Makefile MCU value not set)
|
||||
TARGET ?= $(error Makefile TARGET value not set)
|
||||
|
||||
ifeq ($(MCU),)
|
||||
$(error Makefile MCU option cannot be blank)
|
||||
endif
|
||||
ifeq ($(TARGET),)
|
||||
$(error Makefile TARGET option cannot be blank)
|
||||
endif
|
||||
|
||||
# Output Messages
|
||||
MSG_COPY_CMD := ' [CP] :'
|
||||
MSG_REMOVE_CMD := ' [RM] :'
|
||||
MSG_DFU_CMD := ' [DFU] :'
|
||||
|
||||
flip: $(TARGET).hex $(MAKEFILE_LIST)
|
||||
@echo $(MSG_DFU_CMD) Programming FLASH with batchisp using \"$<\"
|
||||
batchisp -hardware usb -device $(MCU) -operation erase f
|
||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $< program
|
||||
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
||||
|
||||
flip-ee: $(TARGET).eep $(MAKEFILE_LIST)
|
||||
@echo $(MSG_DFU_CMD) Copying EEP file to temporary file \"$<.hex\"
|
||||
cp $< $<.hex
|
||||
@echo $(MSG_DFU_CMD) Programming EEPROM with batchisp using \"$<.hex\"
|
||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
|
||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $<.hex program
|
||||
batchisp -hardware usb -device $(MCU) -operation start reset 0
|
||||
@echo $(MSG_DFU_CMD) Removing temporary file \"$<.hex\"
|
||||
rm $<.hex
|
||||
|
||||
dfu: $(TARGET).hex $(MAKEFILE_LIST)
|
||||
@echo $(MSG_DFU_CMD) Programming FLASH with dfu-programmer using \"$<\"
|
||||
dfu-programmer $(MCU) erase
|
||||
dfu-programmer $(MCU) flash $<
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
dfu-ee: $(TARGET).eep $(MAKEFILE_LIST)
|
||||
@echo $(MSG_DFU_CMD) Programming EEPROM with dfu-programmer using \"$<\"
|
||||
dfu-programmer $(MCU) eeprom-flash $<
|
||||
dfu-programmer $(MCU) reset
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: flip flip-ee dfu dfu-ee
|
||||
|
||||
@ -1,64 +1,64 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += DOXYGEN
|
||||
LUFA_BUILD_TARGETS += doxygen
|
||||
LUFA_BUILD_MANDATORY_VARS += LUFA_PATH
|
||||
LUFA_BUILD_OPTIONAL_VARS += DOXYGEN_CONF DOXYGEN_FAIL_ON_WARNING DOXYGEN_OVERRIDE_PARAMS
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA Doxygen Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to automatically build Doxygen documentation for
|
||||
# a project (see www.doxygen.org).
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# doxygen - Build Doxygen Documentation
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# LUFA_PATH - Path to the LUFA library core
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# DOXYGEN_CONF - Doxygen configuration filename
|
||||
# DOXYGEN_FAIL_ON_WARNING - Set to Y to fail the build on Doxygen warnings,
|
||||
# N to continue even if warnings occur
|
||||
# DOXYGEN_OVERRIDE_PARAMS - Parameters to override in the doxygen
|
||||
# configuration file
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
LUFA_PATH ?= $(error Makefile LUFA_PATH value not set)
|
||||
|
||||
# Default values of optionally user-supplied variables
|
||||
DOXYGEN_CONF ?= Doxygen.conf
|
||||
DOXYGEN_FAIL_ON_WARNING ?= Y
|
||||
DOXYGEN_OVERRIDE_PARAMS ?= QUIET=YES HTML_STYLESHEET=$(patsubst %/,%,$(LUFA_PATH))/DoxygenPages/Style/Style.css
|
||||
|
||||
# Output Messages
|
||||
MSG_DOXYGEN_CMD := ' [DOXYGEN] :'
|
||||
|
||||
# Determine Doxygen invocation command
|
||||
BASE_DOXYGEN_CMD = ( cat Doxygen.conf $(DOXYGEN_OVERRIDE_PARAMS:%=; echo "%") ) | doxygen -
|
||||
ifeq ($(DOXYGEN_FAIL_ON_WARNING), Y)
|
||||
DOXYGEN_CMD = if ( $(BASE_DOXYGEN_CMD) 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then exit 1; fi;
|
||||
else ifeq ($(DOXYGEN_FAIL_ON_WARNING), N)
|
||||
DOXYGEN_CMD = $(BASE_DOXYGEN_CMD)
|
||||
else
|
||||
$(error DOXYGEN_FAIL_ON_WARNING must be Y or N.)
|
||||
endif
|
||||
|
||||
doxygen:
|
||||
@echo $(MSG_DOXYGEN_CMD) Configuration file \"$(DOXYGEN_CONF)\" with parameters \"$(DOXYGEN_OVERRIDE_PARAMS)\"
|
||||
$(DOXYGEN_CMD)
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: doxygen
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += DOXYGEN
|
||||
LUFA_BUILD_TARGETS += doxygen
|
||||
LUFA_BUILD_MANDATORY_VARS += LUFA_PATH
|
||||
LUFA_BUILD_OPTIONAL_VARS += DOXYGEN_CONF DOXYGEN_FAIL_ON_WARNING DOXYGEN_OVERRIDE_PARAMS
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA Doxygen Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of targets to automatically build Doxygen documentation for
|
||||
# a project (see www.doxygen.org).
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# doxygen - Build Doxygen Documentation
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# LUFA_PATH - Path to the LUFA library core
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# DOXYGEN_CONF - Doxygen configuration filename
|
||||
# DOXYGEN_FAIL_ON_WARNING - Set to Y to fail the build on Doxygen warnings,
|
||||
# N to continue even if warnings occur
|
||||
# DOXYGEN_OVERRIDE_PARAMS - Parameters to override in the doxygen
|
||||
# configuration file
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
LUFA_PATH ?= $(error Makefile LUFA_PATH value not set)
|
||||
|
||||
# Default values of optionally user-supplied variables
|
||||
DOXYGEN_CONF ?= Doxygen.conf
|
||||
DOXYGEN_FAIL_ON_WARNING ?= Y
|
||||
DOXYGEN_OVERRIDE_PARAMS ?= QUIET=YES HTML_STYLESHEET=$(patsubst %/,%,$(LUFA_PATH))/DoxygenPages/Style/Style.css
|
||||
|
||||
# Output Messages
|
||||
MSG_DOXYGEN_CMD := ' [DOXYGEN] :'
|
||||
|
||||
# Determine Doxygen invocation command
|
||||
BASE_DOXYGEN_CMD = ( cat Doxygen.conf $(DOXYGEN_OVERRIDE_PARAMS:%=; echo "%") ) | doxygen -
|
||||
ifeq ($(DOXYGEN_FAIL_ON_WARNING), Y)
|
||||
DOXYGEN_CMD = if ( $(BASE_DOXYGEN_CMD) 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then exit 1; fi;
|
||||
else ifeq ($(DOXYGEN_FAIL_ON_WARNING), N)
|
||||
DOXYGEN_CMD = $(BASE_DOXYGEN_CMD)
|
||||
else
|
||||
$(error DOXYGEN_FAIL_ON_WARNING must be Y or N.)
|
||||
endif
|
||||
|
||||
doxygen:
|
||||
@echo $(MSG_DOXYGEN_CMD) Configuration file \"$(DOXYGEN_CONF)\" with parameters \"$(DOXYGEN_OVERRIDE_PARAMS)\"
|
||||
$(DOXYGEN_CMD)
|
||||
|
||||
# Phony build targets for this module
|
||||
.PHONY: doxygen
|
||||
|
||||
@ -1,95 +1,95 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += SOURCES
|
||||
LUFA_BUILD_TARGETS +=
|
||||
LUFA_BUILD_MANDATORY_VARS += LUFA_PATH ARCH
|
||||
LUFA_BUILD_OPTIONAL_VARS +=
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA Sources Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of makefile variables for the various LUFA module sources.
|
||||
# Once included, the sources required to use a given LUFA module will become
|
||||
# available using the makefile variable names listed in the LUFA project
|
||||
# documentation.
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# LUFA_PATH - Path to the LUFA library core
|
||||
# ARCH - Device architecture name
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
ARCH ?= $(error Makefile ARCH value not set)
|
||||
LUFA_PATH ?= $(error Makefile LUFA_PATH value not set)
|
||||
|
||||
ifeq ($(ARCH),)
|
||||
$(error Makefile ARCH option cannot be blank)
|
||||
endif
|
||||
|
||||
# Allow LUFA_ROOT_PATH to be overridden elsewhere to support legacy LUFA makefiles
|
||||
LUFA_ROOT_PATH ?= $(patsubst %/,%,$(LUFA_PATH))
|
||||
|
||||
# Construct LUFA module source variables
|
||||
LUFA_SRC_USB = $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Device_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Endpoint_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Host_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Pipe_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBController_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBInterrupt_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/EndpointStream_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/PipeStream_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/ConfigDescriptor.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/DeviceStandardReq.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/Events.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/HostStandardReq.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/USBTask.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Common/HIDParser.c
|
||||
LUFA_SRC_USBCLASS = $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/AudioClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/HIDClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MassStorageClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MIDIClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/RNDISClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AudioClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/CDCClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/HIDClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MassStorageClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MIDIClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/PrinterClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/RNDISClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/StillImageClassHost.c
|
||||
LUFA_SRC_TEMPERATURE = $(LUFA_ROOT_PATH)/Drivers/Board/Temperature.c
|
||||
LUFA_SRC_SERIAL = $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/Serial_$(ARCH).c
|
||||
LUFA_SRC_TWI = $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/TWI_$(ARCH).c
|
||||
|
||||
ifeq ($(ARCH), UC3)
|
||||
LUFA_SRC_PLATFORM = $(LUFA_PATH)/Platform/UC3/Exception.S $(LUFA_PATH)/Platform/UC3/InterruptManagement.c
|
||||
else
|
||||
LUFA_SRC_PLATFORM =
|
||||
endif
|
||||
|
||||
# Build a list of all available module sources
|
||||
LUFA_SRC_ALL_FILES = $(LUFA_SRC_USB) \
|
||||
$(LUFA_SRC_USBCLASS) \
|
||||
$(LUFA_SRC_TEMPERATURE) \
|
||||
$(LUFA_SRC_SERIAL) \
|
||||
$(LUFA_SRC_TWI) \
|
||||
$(LUFA_SRC_PLATFORM)
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
LUFA_BUILD_MODULES += SOURCES
|
||||
LUFA_BUILD_TARGETS +=
|
||||
LUFA_BUILD_MANDATORY_VARS += LUFA_PATH ARCH
|
||||
LUFA_BUILD_OPTIONAL_VARS +=
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# LUFA Sources Buildsystem Makefile Module.
|
||||
# -----------------------------------------------------------------------------
|
||||
# DESCRIPTION:
|
||||
# Provides a set of makefile variables for the various LUFA module sources.
|
||||
# Once included, the sources required to use a given LUFA module will become
|
||||
# available using the makefile variable names listed in the LUFA project
|
||||
# documentation.
|
||||
# -----------------------------------------------------------------------------
|
||||
# TARGETS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# MANDATORY PARAMETERS:
|
||||
#
|
||||
# LUFA_PATH - Path to the LUFA library core
|
||||
# ARCH - Device architecture name
|
||||
#
|
||||
# OPTIONAL PARAMETERS:
|
||||
#
|
||||
# (None)
|
||||
#
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Sanity-check values of mandatory user-supplied variables
|
||||
ARCH ?= $(error Makefile ARCH value not set)
|
||||
LUFA_PATH ?= $(error Makefile LUFA_PATH value not set)
|
||||
|
||||
ifeq ($(ARCH),)
|
||||
$(error Makefile ARCH option cannot be blank)
|
||||
endif
|
||||
|
||||
# Allow LUFA_ROOT_PATH to be overridden elsewhere to support legacy LUFA makefiles
|
||||
LUFA_ROOT_PATH ?= $(patsubst %/,%,$(LUFA_PATH))
|
||||
|
||||
# Construct LUFA module source variables
|
||||
LUFA_SRC_USB = $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Device_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Endpoint_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Host_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Pipe_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBController_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBInterrupt_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/EndpointStream_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/PipeStream_$(ARCH).c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/ConfigDescriptor.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/DeviceStandardReq.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/Events.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/HostStandardReq.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Core/USBTask.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Common/HIDParser.c
|
||||
LUFA_SRC_USBCLASS = $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/AudioClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/HIDClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MassStorageClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MIDIClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/RNDISClassDevice.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AudioClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/CDCClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/HIDClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MassStorageClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MIDIClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/PrinterClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/RNDISClassHost.c \
|
||||
$(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/StillImageClassHost.c
|
||||
LUFA_SRC_TEMPERATURE = $(LUFA_ROOT_PATH)/Drivers/Board/Temperature.c
|
||||
LUFA_SRC_SERIAL = $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/Serial_$(ARCH).c
|
||||
LUFA_SRC_TWI = $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/TWI_$(ARCH).c
|
||||
|
||||
ifeq ($(ARCH), UC3)
|
||||
LUFA_SRC_PLATFORM = $(LUFA_PATH)/Platform/UC3/Exception.S $(LUFA_PATH)/Platform/UC3/InterruptManagement.c
|
||||
else
|
||||
LUFA_SRC_PLATFORM =
|
||||
endif
|
||||
|
||||
# Build a list of all available module sources
|
||||
LUFA_SRC_ALL_FILES = $(LUFA_SRC_USB) \
|
||||
$(LUFA_SRC_USBCLASS) \
|
||||
$(LUFA_SRC_TEMPERATURE) \
|
||||
$(LUFA_SRC_SERIAL) \
|
||||
$(LUFA_SRC_TWI) \
|
||||
$(LUFA_SRC_PLATFORM)
|
||||
|
||||
@ -1,35 +1,35 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
MCU = at90usb1287
|
||||
ARCH = AVR8
|
||||
BOARD = USBKEY
|
||||
F_CPU = 8000000
|
||||
F_USB = $(F_CPU)
|
||||
OPTIMIZATION = s
|
||||
TARGET = Target
|
||||
SRC = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_PLATFORM)
|
||||
LUFA_PATH = ../../LUFA/
|
||||
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/
|
||||
LD_FLAGS =
|
||||
|
||||
# Default target
|
||||
all:
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
include $(LUFA_PATH)/Build/lufa.sources.in
|
||||
include $(LUFA_PATH)/Build/lufa.build.in
|
||||
include $(LUFA_PATH)/Build/lufa.cppcheck.in
|
||||
include $(LUFA_PATH)/Build/lufa.doxygen.in
|
||||
include $(LUFA_PATH)/Build/lufa.dfu.in
|
||||
include $(LUFA_PATH)/Build/lufa.avrdude.in
|
||||
include $(LUFA_PATH)/Build/lufa.atprogram.in
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
MCU = at90usb1287
|
||||
ARCH = AVR8
|
||||
BOARD = USBKEY
|
||||
F_CPU = 8000000
|
||||
F_USB = $(F_CPU)
|
||||
OPTIMIZATION = s
|
||||
TARGET = Target
|
||||
SRC = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_PLATFORM)
|
||||
LUFA_PATH = ../../LUFA/
|
||||
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/
|
||||
LD_FLAGS =
|
||||
|
||||
# Default target
|
||||
all:
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
include $(LUFA_PATH)/Build/lufa.sources.in
|
||||
include $(LUFA_PATH)/Build/lufa.build.in
|
||||
include $(LUFA_PATH)/Build/lufa.cppcheck.in
|
||||
include $(LUFA_PATH)/Build/lufa.doxygen.in
|
||||
include $(LUFA_PATH)/Build/lufa.dfu.in
|
||||
include $(LUFA_PATH)/Build/lufa.avrdude.in
|
||||
include $(LUFA_PATH)/Build/lufa.atprogram.in
|
||||
|
||||
@ -1,106 +1,106 @@
|
||||
/** \file
|
||||
*
|
||||
* This file contains special DoxyGen information for the generation of the main page and other special
|
||||
* documentation pages. It is not a project source file.
|
||||
*/
|
||||
|
||||
/** \page Page_ExportingLibrary Exporting the Library for IDE Use
|
||||
*
|
||||
* While LUFA was designed to allow for easy compilation in a makefile driven environment,
|
||||
* it is possible to export the library into a form suitable for drop-in use inside of an
|
||||
* IDE.
|
||||
*
|
||||
* \section Sec_LibraryExport Exporting the Library
|
||||
* An export of the library is at its most basic, a direct copy of the main "LUFA" source folder from the
|
||||
* root download folder; this contains the library core which can be re-used within external projects.
|
||||
* However, as many IDEs attempt to automatically compile all included source files, it is neccesary to
|
||||
* exclude some directories and files from the library core export to allow for easier integration into
|
||||
* an IDE project.
|
||||
*
|
||||
* \subsection SSec_ManualExport Manual Export
|
||||
* To manually export the library core, copy over the main LUFA library folder from the LUFA root directory,
|
||||
* renaming as desired. Within the library core folder, the following directories should be removed or
|
||||
* excluded from your IDE import:
|
||||
* - Documentation/
|
||||
* - DoxygenPages/
|
||||
* - CodeTemplates/
|
||||
*
|
||||
* If required, files from the CodeTemplates/ subdirectory may be copied to your IDE project as needed.
|
||||
*
|
||||
* The resulting copy of the library may then be imported into your chosen IDE according to the instructions
|
||||
* shown in \ref Sec_LibraryImport.
|
||||
*
|
||||
* \subsection SSec_AutomaticExport Automatic Export
|
||||
* If desired, the steps indicated in \ref SSec_ManualExport may be automatically performed, by running the
|
||||
* command <b><code>make export_tar</code></b> from the command line. This will generate two .tar files in the
|
||||
* current directory, named <code>LUFA_XXXXXX.tar</code> and <code>LUFA_XXXXXX_Code_Templates.tar</code> (where "XXXXXX" is
|
||||
* the version of the library being exported). The first archive contains the exported LUFA core with the
|
||||
* non-required files removed, while the second contains an archived copy of the code template files for the
|
||||
* current LUFA version.
|
||||
*
|
||||
* The resulting archived copy of the library may then be extracted to your chosen IDE project source directory
|
||||
* and imported according to the instructions shown in \ref Sec_LibraryImport.
|
||||
*
|
||||
* \section Sec_LibraryImport Importing the Library
|
||||
* An exported copy of the library may be imported wholesale into an IDE project, if the instructions detailed
|
||||
* in \ref Sec_LibraryExport are followed.
|
||||
*
|
||||
* Specific instructions for importing an exported version of LUFA into various IDEs are listed below.
|
||||
*
|
||||
* \subsection SSec_AS56_Import Importing into AVRStudio 5/Atmel Studio 6
|
||||
* To import LUFA into a new or existing project, the following steps must be followed.
|
||||
*
|
||||
* \subsubsection SSSec_AS56_Import_Step1 Copy over the exported library
|
||||
* Copy over the exported library archive created via the steps listed in \ref Sec_LibraryExport to your AS5/AS6
|
||||
* project directory.
|
||||
*
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step1.png
|
||||
*
|
||||
* \subsubsection SSSec_AS56_Import_Step2 Extract exported library
|
||||
* Extract out the contents of the archive to a new folder. This may be any name you wish, however keep in mind
|
||||
* that this name will need to be referenced within your user application under most circumstances. It is
|
||||
* suggested that this folder be named "LUFA", or "LUFA" followed by the version string for easy reference.
|
||||
*
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step2.png
|
||||
*
|
||||
* \subsubsection SSSec_AS56_Import_Step3 Add the library files
|
||||
* Open your AVRStudio 5/Atmel Studio 6 project. From the "Solution Explorer" pane, click the "Show All Files"
|
||||
* button on the toolbar to display ghosted icons of files and folders located in the project source directory
|
||||
* that are not currently added to the project.
|
||||
*
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step3.png
|
||||
*
|
||||
* Right-click the ghosted version of the extracted LUFA export folder in the Solution Explorer pane, and
|
||||
* choose the "Add to Project" option from the context menu. This will add the entire LUFA source tree to the
|
||||
* current project.
|
||||
*
|
||||
* \subsubsection SSSec_AS56_Import_Step4 Open Project Toolchain Properties
|
||||
* In the Solution Explorer pane, click the project node, and press the "Properties" button in the toolbar to
|
||||
* open the Project Properties window. This window allows you to configure the various project global compiler,
|
||||
* assembler and linker options.
|
||||
*
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step4.png
|
||||
*
|
||||
* Click the "Toolchain" tab on the left side of the Project Properties window.
|
||||
*
|
||||
* \subsubsection SSSec_AS56_Import_Step5 Configure Project Toolchain Properties
|
||||
*
|
||||
* In the GNU C Compiler section, open the "Symbols" page. Click the "Add Item" button to the top-right of the
|
||||
* "Defined Symbols" section to add new symbols.
|
||||
*
|
||||
* At a minimum, you will need to define the following symbols (for more information on these symbols, see
|
||||
* \ref Page_ConfiguringApps):
|
||||
* - ARCH
|
||||
* - F_CPU
|
||||
* - F_USB
|
||||
* - BOARD
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step5_1.png
|
||||
*
|
||||
* Next, open the GNU C Compiler section's "Optimization" page. Ensure that the option to prepare functions for
|
||||
* garbage collection is enabled.
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step5_2.png
|
||||
*
|
||||
* Finally, in the GNU C Linker section, open the "Optimization" page. Ensure that the option to garbage collect
|
||||
* unused sections is selected.
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step5_3.png
|
||||
*/
|
||||
/** \file
|
||||
*
|
||||
* This file contains special DoxyGen information for the generation of the main page and other special
|
||||
* documentation pages. It is not a project source file.
|
||||
*/
|
||||
|
||||
/** \page Page_ExportingLibrary Exporting the Library for IDE Use
|
||||
*
|
||||
* While LUFA was designed to allow for easy compilation in a makefile driven environment,
|
||||
* it is possible to export the library into a form suitable for drop-in use inside of an
|
||||
* IDE.
|
||||
*
|
||||
* \section Sec_LibraryExport Exporting the Library
|
||||
* An export of the library is at its most basic, a direct copy of the main "LUFA" source folder from the
|
||||
* root download folder; this contains the library core which can be re-used within external projects.
|
||||
* However, as many IDEs attempt to automatically compile all included source files, it is neccesary to
|
||||
* exclude some directories and files from the library core export to allow for easier integration into
|
||||
* an IDE project.
|
||||
*
|
||||
* \subsection SSec_ManualExport Manual Export
|
||||
* To manually export the library core, copy over the main LUFA library folder from the LUFA root directory,
|
||||
* renaming as desired. Within the library core folder, the following directories should be removed or
|
||||
* excluded from your IDE import:
|
||||
* - Documentation/
|
||||
* - DoxygenPages/
|
||||
* - CodeTemplates/
|
||||
*
|
||||
* If required, files from the CodeTemplates/ subdirectory may be copied to your IDE project as needed.
|
||||
*
|
||||
* The resulting copy of the library may then be imported into your chosen IDE according to the instructions
|
||||
* shown in \ref Sec_LibraryImport.
|
||||
*
|
||||
* \subsection SSec_AutomaticExport Automatic Export
|
||||
* If desired, the steps indicated in \ref SSec_ManualExport may be automatically performed, by running the
|
||||
* command <b><code>make export_tar</code></b> from the command line. This will generate two .tar files in the
|
||||
* current directory, named <code>LUFA_XXXXXX.tar</code> and <code>LUFA_XXXXXX_Code_Templates.tar</code> (where "XXXXXX" is
|
||||
* the version of the library being exported). The first archive contains the exported LUFA core with the
|
||||
* non-required files removed, while the second contains an archived copy of the code template files for the
|
||||
* current LUFA version.
|
||||
*
|
||||
* The resulting archived copy of the library may then be extracted to your chosen IDE project source directory
|
||||
* and imported according to the instructions shown in \ref Sec_LibraryImport.
|
||||
*
|
||||
* \section Sec_LibraryImport Importing the Library
|
||||
* An exported copy of the library may be imported wholesale into an IDE project, if the instructions detailed
|
||||
* in \ref Sec_LibraryExport are followed.
|
||||
*
|
||||
* Specific instructions for importing an exported version of LUFA into various IDEs are listed below.
|
||||
*
|
||||
* \subsection SSec_AS56_Import Importing into AVRStudio 5/Atmel Studio 6
|
||||
* To import LUFA into a new or existing project, the following steps must be followed.
|
||||
*
|
||||
* \subsubsection SSSec_AS56_Import_Step1 Copy over the exported library
|
||||
* Copy over the exported library archive created via the steps listed in \ref Sec_LibraryExport to your AS5/AS6
|
||||
* project directory.
|
||||
*
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step1.png
|
||||
*
|
||||
* \subsubsection SSSec_AS56_Import_Step2 Extract exported library
|
||||
* Extract out the contents of the archive to a new folder. This may be any name you wish, however keep in mind
|
||||
* that this name will need to be referenced within your user application under most circumstances. It is
|
||||
* suggested that this folder be named "LUFA", or "LUFA" followed by the version string for easy reference.
|
||||
*
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step2.png
|
||||
*
|
||||
* \subsubsection SSSec_AS56_Import_Step3 Add the library files
|
||||
* Open your AVRStudio 5/Atmel Studio 6 project. From the "Solution Explorer" pane, click the "Show All Files"
|
||||
* button on the toolbar to display ghosted icons of files and folders located in the project source directory
|
||||
* that are not currently added to the project.
|
||||
*
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step3.png
|
||||
*
|
||||
* Right-click the ghosted version of the extracted LUFA export folder in the Solution Explorer pane, and
|
||||
* choose the "Add to Project" option from the context menu. This will add the entire LUFA source tree to the
|
||||
* current project.
|
||||
*
|
||||
* \subsubsection SSSec_AS56_Import_Step4 Open Project Toolchain Properties
|
||||
* In the Solution Explorer pane, click the project node, and press the "Properties" button in the toolbar to
|
||||
* open the Project Properties window. This window allows you to configure the various project global compiler,
|
||||
* assembler and linker options.
|
||||
*
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step4.png
|
||||
*
|
||||
* Click the "Toolchain" tab on the left side of the Project Properties window.
|
||||
*
|
||||
* \subsubsection SSSec_AS56_Import_Step5 Configure Project Toolchain Properties
|
||||
*
|
||||
* In the GNU C Compiler section, open the "Symbols" page. Click the "Add Item" button to the top-right of the
|
||||
* "Defined Symbols" section to add new symbols.
|
||||
*
|
||||
* At a minimum, you will need to define the following symbols (for more information on these symbols, see
|
||||
* \ref Page_ConfiguringApps):
|
||||
* - ARCH
|
||||
* - F_CPU
|
||||
* - F_USB
|
||||
* - BOARD
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step5_1.png
|
||||
*
|
||||
* Next, open the GNU C Compiler section's "Optimization" page. Ensure that the option to prepare functions for
|
||||
* garbage collection is enabled.
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step5_2.png
|
||||
*
|
||||
* Finally, in the GNU C Linker section, open the "Optimization" page. Ensure that the option to garbage collect
|
||||
* unused sections is selected.
|
||||
* \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step5_3.png
|
||||
*/
|
||||
|
||||
@ -1,42 +1,42 @@
|
||||
/** \file
|
||||
*
|
||||
* This file contains special DoxyGen information for the generation of the main page and other special
|
||||
* documentation pages. It is not a project source file.
|
||||
*/
|
||||
|
||||
/** \page Page_KnownIssues Known Issues
|
||||
* The following are known issues present in each official LUFA release. This list should contain all known
|
||||
* issues in the library. Most of these issues should be corrected in the future release - see
|
||||
* \ref Page_FutureChanges for a list of planned changes in future releases.
|
||||
*
|
||||
* \section Sec_KnownIssuesXXXXXX Version XXXXXX
|
||||
* - AVR8 Architecture
|
||||
* - No known issues.
|
||||
* - XMEGA Architecture
|
||||
* - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release,
|
||||
* although the architecture is supported in the LUFA core library.
|
||||
* - Endpoints of more than 64 bytes are not currently supported in this release.
|
||||
* - Isochronous endpoints are not currently supported in this release. As a result, the audio class
|
||||
* cannot be used on XMEGA devices.
|
||||
* - Multiple-bank endpoints are not currently supported in this release.
|
||||
* - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata
|
||||
* relating to the USB controller.
|
||||
* - UC3 Architecture
|
||||
* - No demos, bootloaders or projects have been ported for the UC3 devices in the current release,
|
||||
* although the architecture is supported in the LUFA core library.
|
||||
* - DMA transfers to and from the USB controller are not yet implemented for this release.
|
||||
* - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their
|
||||
* altered USB controller design.
|
||||
* - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file
|
||||
* streams are not available on the UC3 architecture, due to a lack of suitable library support.
|
||||
* - Architecture Independant
|
||||
* - The HID parser fails for array type elements that have a MIN and MAX usage applied; each element
|
||||
* in the array will receive a unique incrementing usage from the MIN value, up to MAX.
|
||||
* - The current application makefiles do not work if the output directory is not the same directory
|
||||
* as the makefile itself.
|
||||
* - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used
|
||||
* and a lengthy USB operation is initiated.
|
||||
* - Build System
|
||||
* - No known issues.
|
||||
*/
|
||||
|
||||
/** \file
|
||||
*
|
||||
* This file contains special DoxyGen information for the generation of the main page and other special
|
||||
* documentation pages. It is not a project source file.
|
||||
*/
|
||||
|
||||
/** \page Page_KnownIssues Known Issues
|
||||
* The following are known issues present in each official LUFA release. This list should contain all known
|
||||
* issues in the library. Most of these issues should be corrected in the future release - see
|
||||
* \ref Page_FutureChanges for a list of planned changes in future releases.
|
||||
*
|
||||
* \section Sec_KnownIssuesXXXXXX Version XXXXXX
|
||||
* - AVR8 Architecture
|
||||
* - No known issues.
|
||||
* - XMEGA Architecture
|
||||
* - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release,
|
||||
* although the architecture is supported in the LUFA core library.
|
||||
* - Endpoints of more than 64 bytes are not currently supported in this release.
|
||||
* - Isochronous endpoints are not currently supported in this release. As a result, the audio class
|
||||
* cannot be used on XMEGA devices.
|
||||
* - Multiple-bank endpoints are not currently supported in this release.
|
||||
* - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata
|
||||
* relating to the USB controller.
|
||||
* - UC3 Architecture
|
||||
* - No demos, bootloaders or projects have been ported for the UC3 devices in the current release,
|
||||
* although the architecture is supported in the LUFA core library.
|
||||
* - DMA transfers to and from the USB controller are not yet implemented for this release.
|
||||
* - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their
|
||||
* altered USB controller design.
|
||||
* - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file
|
||||
* streams are not available on the UC3 architecture, due to a lack of suitable library support.
|
||||
* - Architecture Independant
|
||||
* - The HID parser fails for array type elements that have a MIN and MAX usage applied; each element
|
||||
* in the array will receive a unique incrementing usage from the MIN value, up to MAX.
|
||||
* - The current application makefiles do not work if the output directory is not the same directory
|
||||
* as the makefile itself.
|
||||
* - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used
|
||||
* and a lengthy USB operation is initiated.
|
||||
* - Build System
|
||||
* - No known issues.
|
||||
*/
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,161 +1,161 @@
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/** \file
|
||||
* \brief Board specific LED driver header for the Bitwizard Big-Multio.
|
||||
* \copydetails Group_LEDs_BIGMULTIO
|
||||
*
|
||||
* \note This file should not be included directly. It is automatically included as needed by the LEDs driver
|
||||
* dispatch header located in LUFA/Drivers/Board/LEDs.h.
|
||||
*/
|
||||
|
||||
/** \ingroup Group_LEDs
|
||||
* \defgroup Group_LEDs_BIGMULTIO BIGMULTIO
|
||||
* \brief Board specific LED driver header for the Bitwizard Big-Multio.
|
||||
*
|
||||
* Board specific LED driver header for the Bitwizard Big-Multio (http://www.bitwizard.nl/wiki/index.php/Usbbigmultio).
|
||||
*
|
||||
* <table>
|
||||
* <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
|
||||
* <tr><td>LEDS_LED1</td><td>Unknown</td><td>LED0</td><td>High</td><td>PORTF.6</td></tr>
|
||||
* <tr><td>LEDS_LED2</td><td>Unknown</td><td>LED1</td><td>High</td><td>PORTF.7</td></tr>
|
||||
* <tr><td>LEDS_LED3</td><td>Unknown</td><td>LED2</td><td>High</td><td>PORTE.2</td></tr>
|
||||
* </table>
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef __LEDS_BIGMULTIO_H__
|
||||
#define __LEDS_BIGMULTIO_H__
|
||||
|
||||
/* Includes: */
|
||||
#include "../../../../Common/Common.h"
|
||||
|
||||
/* Enable C linkage for C++ Compilers: */
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Preprocessor Checks: */
|
||||
#if !defined(__INCLUDE_FROM_LEDS_H)
|
||||
#error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
|
||||
#endif
|
||||
|
||||
/* Private Interface - For use in library only: */
|
||||
#if !defined(__DOXYGEN__)
|
||||
/* Macros: */
|
||||
#define LEDS_PORTF_LEDS (LEDS_LED1 | LEDS_LED2)
|
||||
#define LEDS_PORTE_LEDS LEDS_LED3
|
||||
#endif
|
||||
|
||||
/* Public Interface - May be used in end-application: */
|
||||
/* Macros: */
|
||||
/** LED mask for the first LED on the board. */
|
||||
#define LEDS_LED1 (1 << 6)
|
||||
|
||||
/** LED mask for the second LED on the board. */
|
||||
#define LEDS_LED2 (1 << 7)
|
||||
|
||||
/** LED mask for the second LED on the board. */
|
||||
#define LEDS_LED3 (1 << 2)
|
||||
|
||||
/** LED mask for all the LEDs on the board. */
|
||||
#define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
|
||||
|
||||
/** LED mask for none of the board LEDs. */
|
||||
#define LEDS_NO_LEDS 0
|
||||
|
||||
/* Inline Functions: */
|
||||
#if !defined(__DOXYGEN__)
|
||||
static inline void LEDs_Init(void)
|
||||
{
|
||||
DDRF |= LEDS_PORTF_LEDS;
|
||||
DDRE |= LEDS_PORTE_LEDS;
|
||||
|
||||
PORTF &= ~LEDS_PORTF_LEDS;
|
||||
PORTE &= ~LEDS_PORTE_LEDS;
|
||||
}
|
||||
|
||||
static inline void LEDs_Disable(void)
|
||||
{
|
||||
DDRF |= LEDS_PORTF_LEDS;
|
||||
DDRE |= LEDS_PORTE_LEDS;
|
||||
|
||||
PORTF &= ~LEDS_PORTF_LEDS;
|
||||
PORTE &= ~LEDS_PORTE_LEDS;
|
||||
}
|
||||
|
||||
static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTF |= (LEDMask & LEDS_PORTF_LEDS);
|
||||
PORTE |= (LEDMask & LEDS_PORTE_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTF &= ~(LEDMask & LEDS_PORTF_LEDS);
|
||||
PORTE &= ~(LEDMask & LEDS_PORTE_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTF = (PORTF & ~LEDS_PORTF_LEDS) | (LEDMask & LEDS_PORTF_LEDS);
|
||||
PORTE = (PORTE & ~LEDS_PORTE_LEDS) | (LEDMask & LEDS_PORTE_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
|
||||
const uint8_t ActiveMask)
|
||||
{
|
||||
PORTF = (PORTF & ~(LEDMask & LEDS_PORTF_LEDS)) | (ActiveMask & LEDS_PORTF_LEDS);
|
||||
PORTE = (PORTE & ~(LEDMask & LEDS_PORTE_LEDS)) | (ActiveMask & LEDS_PORTE_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PINF = (LEDMask & LEDS_PORTF_LEDS);
|
||||
PINE = (LEDMask & LEDS_PORTE_LEDS);
|
||||
}
|
||||
|
||||
static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
|
||||
static inline uint8_t LEDs_GetLEDs(void)
|
||||
{
|
||||
return ((PORTF & LEDS_PORTF_LEDS) | (PORTE & LEDS_PORTE_LEDS));
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Disable C linkage for C++ Compilers: */
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/** \file
|
||||
* \brief Board specific LED driver header for the Bitwizard Big-Multio.
|
||||
* \copydetails Group_LEDs_BIGMULTIO
|
||||
*
|
||||
* \note This file should not be included directly. It is automatically included as needed by the LEDs driver
|
||||
* dispatch header located in LUFA/Drivers/Board/LEDs.h.
|
||||
*/
|
||||
|
||||
/** \ingroup Group_LEDs
|
||||
* \defgroup Group_LEDs_BIGMULTIO BIGMULTIO
|
||||
* \brief Board specific LED driver header for the Bitwizard Big-Multio.
|
||||
*
|
||||
* Board specific LED driver header for the Bitwizard Big-Multio (http://www.bitwizard.nl/wiki/index.php/Usbbigmultio).
|
||||
*
|
||||
* <table>
|
||||
* <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
|
||||
* <tr><td>LEDS_LED1</td><td>Unknown</td><td>LED0</td><td>High</td><td>PORTF.6</td></tr>
|
||||
* <tr><td>LEDS_LED2</td><td>Unknown</td><td>LED1</td><td>High</td><td>PORTF.7</td></tr>
|
||||
* <tr><td>LEDS_LED3</td><td>Unknown</td><td>LED2</td><td>High</td><td>PORTE.2</td></tr>
|
||||
* </table>
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef __LEDS_BIGMULTIO_H__
|
||||
#define __LEDS_BIGMULTIO_H__
|
||||
|
||||
/* Includes: */
|
||||
#include "../../../../Common/Common.h"
|
||||
|
||||
/* Enable C linkage for C++ Compilers: */
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Preprocessor Checks: */
|
||||
#if !defined(__INCLUDE_FROM_LEDS_H)
|
||||
#error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
|
||||
#endif
|
||||
|
||||
/* Private Interface - For use in library only: */
|
||||
#if !defined(__DOXYGEN__)
|
||||
/* Macros: */
|
||||
#define LEDS_PORTF_LEDS (LEDS_LED1 | LEDS_LED2)
|
||||
#define LEDS_PORTE_LEDS LEDS_LED3
|
||||
#endif
|
||||
|
||||
/* Public Interface - May be used in end-application: */
|
||||
/* Macros: */
|
||||
/** LED mask for the first LED on the board. */
|
||||
#define LEDS_LED1 (1 << 6)
|
||||
|
||||
/** LED mask for the second LED on the board. */
|
||||
#define LEDS_LED2 (1 << 7)
|
||||
|
||||
/** LED mask for the second LED on the board. */
|
||||
#define LEDS_LED3 (1 << 2)
|
||||
|
||||
/** LED mask for all the LEDs on the board. */
|
||||
#define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
|
||||
|
||||
/** LED mask for none of the board LEDs. */
|
||||
#define LEDS_NO_LEDS 0
|
||||
|
||||
/* Inline Functions: */
|
||||
#if !defined(__DOXYGEN__)
|
||||
static inline void LEDs_Init(void)
|
||||
{
|
||||
DDRF |= LEDS_PORTF_LEDS;
|
||||
DDRE |= LEDS_PORTE_LEDS;
|
||||
|
||||
PORTF &= ~LEDS_PORTF_LEDS;
|
||||
PORTE &= ~LEDS_PORTE_LEDS;
|
||||
}
|
||||
|
||||
static inline void LEDs_Disable(void)
|
||||
{
|
||||
DDRF |= LEDS_PORTF_LEDS;
|
||||
DDRE |= LEDS_PORTE_LEDS;
|
||||
|
||||
PORTF &= ~LEDS_PORTF_LEDS;
|
||||
PORTE &= ~LEDS_PORTE_LEDS;
|
||||
}
|
||||
|
||||
static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTF |= (LEDMask & LEDS_PORTF_LEDS);
|
||||
PORTE |= (LEDMask & LEDS_PORTE_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTF &= ~(LEDMask & LEDS_PORTF_LEDS);
|
||||
PORTE &= ~(LEDMask & LEDS_PORTE_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTF = (PORTF & ~LEDS_PORTF_LEDS) | (LEDMask & LEDS_PORTF_LEDS);
|
||||
PORTE = (PORTE & ~LEDS_PORTE_LEDS) | (LEDMask & LEDS_PORTE_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
|
||||
const uint8_t ActiveMask)
|
||||
{
|
||||
PORTF = (PORTF & ~(LEDMask & LEDS_PORTF_LEDS)) | (ActiveMask & LEDS_PORTF_LEDS);
|
||||
PORTE = (PORTE & ~(LEDMask & LEDS_PORTE_LEDS)) | (ActiveMask & LEDS_PORTE_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PINF = (LEDMask & LEDS_PORTF_LEDS);
|
||||
PINE = (LEDMask & LEDS_PORTE_LEDS);
|
||||
}
|
||||
|
||||
static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
|
||||
static inline uint8_t LEDs_GetLEDs(void)
|
||||
{
|
||||
return ((PORTF & LEDS_PORTF_LEDS) | (PORTE & LEDS_PORTE_LEDS));
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Disable C linkage for C++ Compilers: */
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
|
||||
@ -1,161 +1,161 @@
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/** \file
|
||||
* \brief Board specific LED driver header for the Bitwizard Multio.
|
||||
* \copydetails Group_LEDs_MULTIO
|
||||
*
|
||||
* \note This file should not be included directly. It is automatically included as needed by the LEDs driver
|
||||
* dispatch header located in LUFA/Drivers/Board/LEDs.h.
|
||||
*/
|
||||
|
||||
/** \ingroup Group_LEDs
|
||||
* \defgroup Group_LEDs_MULTIO MULTIO
|
||||
* \brief Board specific LED driver header for the Bitwizard Multio.
|
||||
*
|
||||
* Board specific LED driver header for the Bitwizard Multio (http://www.bitwizard.nl/wiki/index.php/USB-multio).
|
||||
*
|
||||
* <table>
|
||||
* <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
|
||||
* <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.0</td></tr>
|
||||
* <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTC.2</td></tr>
|
||||
* <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>
|
||||
* </table>
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef __LEDS_MULTIO_H__
|
||||
#define __LEDS_MULTIO_H__
|
||||
|
||||
/* Includes: */
|
||||
#include "../../../../Common/Common.h"
|
||||
|
||||
/* Enable C linkage for C++ Compilers: */
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Preprocessor Checks: */
|
||||
#if !defined(__INCLUDE_FROM_LEDS_H)
|
||||
#error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
|
||||
#endif
|
||||
|
||||
/* Private Interface - For use in library only: */
|
||||
#if !defined(__DOXYGEN__)
|
||||
/* Macros: */
|
||||
#define LEDS_PORTD_LEDS (LEDS_LED1 | LEDS_LED3)
|
||||
#define LEDS_PORTC_LEDS LEDS_LED2
|
||||
#endif
|
||||
|
||||
/* Public Interface - May be used in end-application: */
|
||||
/* Macros: */
|
||||
/** LED mask for the first LED on the board. */
|
||||
#define LEDS_LED1 (1 << 0)
|
||||
|
||||
/** LED mask for the second LED on the board. */
|
||||
#define LEDS_LED2 (1 << 2)
|
||||
|
||||
/** LED mask for the second LED on the board. */
|
||||
#define LEDS_LED3 (1 << 7)
|
||||
|
||||
/** LED mask for all the LEDs on the board. */
|
||||
#define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
|
||||
|
||||
/** LED mask for none of the board LEDs. */
|
||||
#define LEDS_NO_LEDS 0
|
||||
|
||||
/* Inline Functions: */
|
||||
#if !defined(__DOXYGEN__)
|
||||
static inline void LEDs_Init(void)
|
||||
{
|
||||
DDRD |= LEDS_PORTD_LEDS;
|
||||
DDRC |= LEDS_PORTC_LEDS;
|
||||
|
||||
PORTD &= ~LEDS_PORTD_LEDS;
|
||||
PORTC &= ~LEDS_PORTC_LEDS;
|
||||
}
|
||||
|
||||
static inline void LEDs_Disable(void)
|
||||
{
|
||||
DDRD |= LEDS_PORTD_LEDS;
|
||||
DDRC |= LEDS_PORTC_LEDS;
|
||||
|
||||
PORTD &= ~LEDS_PORTD_LEDS;
|
||||
PORTC &= ~LEDS_PORTC_LEDS;
|
||||
}
|
||||
|
||||
static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTD |= (LEDMask & LEDS_PORTD_LEDS);
|
||||
PORTC |= (LEDMask & LEDS_PORTC_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTD &= ~(LEDMask & LEDS_PORTD_LEDS);
|
||||
PORTC &= ~(LEDMask & LEDS_PORTC_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTD = (PORTD & ~LEDS_PORTD_LEDS) | (LEDMask & LEDS_PORTD_LEDS);
|
||||
PORTC = (PORTC & ~LEDS_PORTC_LEDS) | (LEDMask & LEDS_PORTC_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
|
||||
const uint8_t ActiveMask)
|
||||
{
|
||||
PORTD = (PORTD & ~(LEDMask & LEDS_PORTD_LEDS)) | (ActiveMask & LEDS_PORTD_LEDS);
|
||||
PORTC = (PORTC & ~(LEDMask & LEDS_PORTC_LEDS)) | (ActiveMask & LEDS_PORTC_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PIND = (LEDMask & LEDS_PORTD_LEDS);
|
||||
PINC = (LEDMask & LEDS_PORTC_LEDS);
|
||||
}
|
||||
|
||||
static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
|
||||
static inline uint8_t LEDs_GetLEDs(void)
|
||||
{
|
||||
return ((PORTD & LEDS_PORTD_LEDS) | (PORTC & LEDS_PORTC_LEDS));
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Disable C linkage for C++ Compilers: */
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
/** \file
|
||||
* \brief Board specific LED driver header for the Bitwizard Multio.
|
||||
* \copydetails Group_LEDs_MULTIO
|
||||
*
|
||||
* \note This file should not be included directly. It is automatically included as needed by the LEDs driver
|
||||
* dispatch header located in LUFA/Drivers/Board/LEDs.h.
|
||||
*/
|
||||
|
||||
/** \ingroup Group_LEDs
|
||||
* \defgroup Group_LEDs_MULTIO MULTIO
|
||||
* \brief Board specific LED driver header for the Bitwizard Multio.
|
||||
*
|
||||
* Board specific LED driver header for the Bitwizard Multio (http://www.bitwizard.nl/wiki/index.php/USB-multio).
|
||||
*
|
||||
* <table>
|
||||
* <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
|
||||
* <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.0</td></tr>
|
||||
* <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTC.2</td></tr>
|
||||
* <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>
|
||||
* </table>
|
||||
*
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef __LEDS_MULTIO_H__
|
||||
#define __LEDS_MULTIO_H__
|
||||
|
||||
/* Includes: */
|
||||
#include "../../../../Common/Common.h"
|
||||
|
||||
/* Enable C linkage for C++ Compilers: */
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Preprocessor Checks: */
|
||||
#if !defined(__INCLUDE_FROM_LEDS_H)
|
||||
#error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
|
||||
#endif
|
||||
|
||||
/* Private Interface - For use in library only: */
|
||||
#if !defined(__DOXYGEN__)
|
||||
/* Macros: */
|
||||
#define LEDS_PORTD_LEDS (LEDS_LED1 | LEDS_LED3)
|
||||
#define LEDS_PORTC_LEDS LEDS_LED2
|
||||
#endif
|
||||
|
||||
/* Public Interface - May be used in end-application: */
|
||||
/* Macros: */
|
||||
/** LED mask for the first LED on the board. */
|
||||
#define LEDS_LED1 (1 << 0)
|
||||
|
||||
/** LED mask for the second LED on the board. */
|
||||
#define LEDS_LED2 (1 << 2)
|
||||
|
||||
/** LED mask for the second LED on the board. */
|
||||
#define LEDS_LED3 (1 << 7)
|
||||
|
||||
/** LED mask for all the LEDs on the board. */
|
||||
#define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
|
||||
|
||||
/** LED mask for none of the board LEDs. */
|
||||
#define LEDS_NO_LEDS 0
|
||||
|
||||
/* Inline Functions: */
|
||||
#if !defined(__DOXYGEN__)
|
||||
static inline void LEDs_Init(void)
|
||||
{
|
||||
DDRD |= LEDS_PORTD_LEDS;
|
||||
DDRC |= LEDS_PORTC_LEDS;
|
||||
|
||||
PORTD &= ~LEDS_PORTD_LEDS;
|
||||
PORTC &= ~LEDS_PORTC_LEDS;
|
||||
}
|
||||
|
||||
static inline void LEDs_Disable(void)
|
||||
{
|
||||
DDRD |= LEDS_PORTD_LEDS;
|
||||
DDRC |= LEDS_PORTC_LEDS;
|
||||
|
||||
PORTD &= ~LEDS_PORTD_LEDS;
|
||||
PORTC &= ~LEDS_PORTC_LEDS;
|
||||
}
|
||||
|
||||
static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTD |= (LEDMask & LEDS_PORTD_LEDS);
|
||||
PORTC |= (LEDMask & LEDS_PORTC_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTD &= ~(LEDMask & LEDS_PORTD_LEDS);
|
||||
PORTC &= ~(LEDMask & LEDS_PORTC_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PORTD = (PORTD & ~LEDS_PORTD_LEDS) | (LEDMask & LEDS_PORTD_LEDS);
|
||||
PORTC = (PORTC & ~LEDS_PORTC_LEDS) | (LEDMask & LEDS_PORTC_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
|
||||
const uint8_t ActiveMask)
|
||||
{
|
||||
PORTD = (PORTD & ~(LEDMask & LEDS_PORTD_LEDS)) | (ActiveMask & LEDS_PORTD_LEDS);
|
||||
PORTC = (PORTC & ~(LEDMask & LEDS_PORTC_LEDS)) | (ActiveMask & LEDS_PORTC_LEDS);
|
||||
}
|
||||
|
||||
static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
|
||||
{
|
||||
PIND = (LEDMask & LEDS_PORTD_LEDS);
|
||||
PINC = (LEDMask & LEDS_PORTC_LEDS);
|
||||
}
|
||||
|
||||
static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
|
||||
static inline uint8_t LEDs_GetLEDs(void)
|
||||
{
|
||||
return ((PORTD & LEDS_PORTD_LEDS) | (PORTC & LEDS_PORTC_LEDS));
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Disable C linkage for C++ Compilers: */
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
|
||||
@ -1,221 +1,221 @@
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#include "../../../../Common/Common.h"
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
|
||||
#define __INCLUDE_FROM_USB_DRIVER
|
||||
#include "../USBMode.h"
|
||||
|
||||
#if defined(USB_CAN_BE_HOST)
|
||||
|
||||
#include "PipeStream_AVR8.h"
|
||||
|
||||
uint8_t Pipe_Discard_Stream(uint16_t Length,
|
||||
uint16_t* const BytesProcessed)
|
||||
{
|
||||
uint8_t ErrorCode;
|
||||
uint16_t BytesInTransfer = 0;
|
||||
|
||||
Pipe_SetPipeToken(PIPE_TOKEN_IN);
|
||||
|
||||
if ((ErrorCode = Pipe_WaitUntilReady()))
|
||||
return ErrorCode;
|
||||
|
||||
if (BytesProcessed != NULL)
|
||||
Length -= *BytesProcessed;
|
||||
|
||||
while (Length)
|
||||
{
|
||||
if (!(Pipe_IsReadWriteAllowed()))
|
||||
{
|
||||
Pipe_ClearIN();
|
||||
|
||||
if (BytesProcessed != NULL)
|
||||
{
|
||||
*BytesProcessed += BytesInTransfer;
|
||||
return PIPE_RWSTREAM_IncompleteTransfer;
|
||||
}
|
||||
|
||||
if ((ErrorCode = Pipe_WaitUntilReady()))
|
||||
return ErrorCode;
|
||||
}
|
||||
else
|
||||
{
|
||||
Pipe_Discard_8();
|
||||
|
||||
Length--;
|
||||
BytesInTransfer++;
|
||||
}
|
||||
}
|
||||
|
||||
return PIPE_RWSTREAM_NoError;
|
||||
}
|
||||
|
||||
uint8_t Pipe_Null_Stream(uint16_t Length,
|
||||
uint16_t* const BytesProcessed)
|
||||
{
|
||||
uint8_t ErrorCode;
|
||||
uint16_t BytesInTransfer = 0;
|
||||
|
||||
Pipe_SetPipeToken(PIPE_TOKEN_OUT);
|
||||
|
||||
if ((ErrorCode = Pipe_WaitUntilReady()))
|
||||
return ErrorCode;
|
||||
|
||||
if (BytesProcessed != NULL)
|
||||
Length -= *BytesProcessed;
|
||||
|
||||
while (Length)
|
||||
{
|
||||
if (!(Pipe_IsReadWriteAllowed()))
|
||||
{
|
||||
Pipe_ClearOUT();
|
||||
|
||||
if (BytesProcessed != NULL)
|
||||
{
|
||||
*BytesProcessed += BytesInTransfer;
|
||||
return PIPE_RWSTREAM_IncompleteTransfer;
|
||||
}
|
||||
|
||||
USB_USBTask();
|
||||
|
||||
if ((ErrorCode = Pipe_WaitUntilReady()))
|
||||
return ErrorCode;
|
||||
}
|
||||
else
|
||||
{
|
||||
Pipe_Write_8(0);
|
||||
|
||||
Length--;
|
||||
BytesInTransfer++;
|
||||
}
|
||||
}
|
||||
|
||||
return PIPE_RWSTREAM_NoError;
|
||||
}
|
||||
|
||||
/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations,
|
||||
* so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_LE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) 0
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr)
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr)
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE
|
||||
#define TEMPLATE_BUFFER_TYPE void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_IN
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) 0
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8()
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE
|
||||
#define TEMPLATE_BUFFER_TYPE void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_IN
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8()
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_LE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) 0
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(pgm_read_byte(BufferPtr))
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_BE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(pgm_read_byte(BufferPtr))
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_LE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) 0
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(eeprom_read_byte(BufferPtr))
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_BE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(eeprom_read_byte(BufferPtr))
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_LE
|
||||
#define TEMPLATE_BUFFER_TYPE void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_IN
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) 0
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_8())
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_BE
|
||||
#define TEMPLATE_BUFFER_TYPE void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_IN
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_8())
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
LUFA Library
|
||||
Copyright (C) Dean Camera, 2012.
|
||||
|
||||
dean [at] fourwalledcubicle [dot] com
|
||||
www.lufa-lib.org
|
||||
*/
|
||||
|
||||
/*
|
||||
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
||||
|
||||
Permission to use, copy, modify, distribute, and sell this
|
||||
software and its documentation for any purpose is hereby granted
|
||||
without fee, provided that the above copyright notice appear in
|
||||
all copies and that both that the copyright notice and this
|
||||
permission notice and warranty disclaimer appear in supporting
|
||||
documentation, and that the name of the author not be used in
|
||||
advertising or publicity pertaining to distribution of the
|
||||
software without specific, written prior permission.
|
||||
|
||||
The author disclaim all warranties with regard to this
|
||||
software, including all implied warranties of merchantability
|
||||
and fitness. In no event shall the author be liable for any
|
||||
special, indirect or consequential damages or any damages
|
||||
whatsoever resulting from loss of use, data or profits, whether
|
||||
in an action of contract, negligence or other tortious action,
|
||||
arising out of or in connection with the use or performance of
|
||||
this software.
|
||||
*/
|
||||
|
||||
#include "../../../../Common/Common.h"
|
||||
#if (ARCH == ARCH_AVR8)
|
||||
|
||||
#define __INCLUDE_FROM_USB_DRIVER
|
||||
#include "../USBMode.h"
|
||||
|
||||
#if defined(USB_CAN_BE_HOST)
|
||||
|
||||
#include "PipeStream_AVR8.h"
|
||||
|
||||
uint8_t Pipe_Discard_Stream(uint16_t Length,
|
||||
uint16_t* const BytesProcessed)
|
||||
{
|
||||
uint8_t ErrorCode;
|
||||
uint16_t BytesInTransfer = 0;
|
||||
|
||||
Pipe_SetPipeToken(PIPE_TOKEN_IN);
|
||||
|
||||
if ((ErrorCode = Pipe_WaitUntilReady()))
|
||||
return ErrorCode;
|
||||
|
||||
if (BytesProcessed != NULL)
|
||||
Length -= *BytesProcessed;
|
||||
|
||||
while (Length)
|
||||
{
|
||||
if (!(Pipe_IsReadWriteAllowed()))
|
||||
{
|
||||
Pipe_ClearIN();
|
||||
|
||||
if (BytesProcessed != NULL)
|
||||
{
|
||||
*BytesProcessed += BytesInTransfer;
|
||||
return PIPE_RWSTREAM_IncompleteTransfer;
|
||||
}
|
||||
|
||||
if ((ErrorCode = Pipe_WaitUntilReady()))
|
||||
return ErrorCode;
|
||||
}
|
||||
else
|
||||
{
|
||||
Pipe_Discard_8();
|
||||
|
||||
Length--;
|
||||
BytesInTransfer++;
|
||||
}
|
||||
}
|
||||
|
||||
return PIPE_RWSTREAM_NoError;
|
||||
}
|
||||
|
||||
uint8_t Pipe_Null_Stream(uint16_t Length,
|
||||
uint16_t* const BytesProcessed)
|
||||
{
|
||||
uint8_t ErrorCode;
|
||||
uint16_t BytesInTransfer = 0;
|
||||
|
||||
Pipe_SetPipeToken(PIPE_TOKEN_OUT);
|
||||
|
||||
if ((ErrorCode = Pipe_WaitUntilReady()))
|
||||
return ErrorCode;
|
||||
|
||||
if (BytesProcessed != NULL)
|
||||
Length -= *BytesProcessed;
|
||||
|
||||
while (Length)
|
||||
{
|
||||
if (!(Pipe_IsReadWriteAllowed()))
|
||||
{
|
||||
Pipe_ClearOUT();
|
||||
|
||||
if (BytesProcessed != NULL)
|
||||
{
|
||||
*BytesProcessed += BytesInTransfer;
|
||||
return PIPE_RWSTREAM_IncompleteTransfer;
|
||||
}
|
||||
|
||||
USB_USBTask();
|
||||
|
||||
if ((ErrorCode = Pipe_WaitUntilReady()))
|
||||
return ErrorCode;
|
||||
}
|
||||
else
|
||||
{
|
||||
Pipe_Write_8(0);
|
||||
|
||||
Length--;
|
||||
BytesInTransfer++;
|
||||
}
|
||||
}
|
||||
|
||||
return PIPE_RWSTREAM_NoError;
|
||||
}
|
||||
|
||||
/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations,
|
||||
* so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_LE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) 0
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr)
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr)
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE
|
||||
#define TEMPLATE_BUFFER_TYPE void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_IN
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) 0
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8()
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE
|
||||
#define TEMPLATE_BUFFER_TYPE void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_IN
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8()
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_LE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) 0
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(pgm_read_byte(BufferPtr))
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_BE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(pgm_read_byte(BufferPtr))
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_LE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) 0
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(eeprom_read_byte(BufferPtr))
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_BE
|
||||
#define TEMPLATE_BUFFER_TYPE const void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(eeprom_read_byte(BufferPtr))
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_LE
|
||||
#define TEMPLATE_BUFFER_TYPE void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_IN
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) 0
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_8())
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_BE
|
||||
#define TEMPLATE_BUFFER_TYPE void*
|
||||
#define TEMPLATE_TOKEN PIPE_TOKEN_IN
|
||||
#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
|
||||
#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
|
||||
#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
|
||||
#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_8())
|
||||
#include "Template/Template_Pipe_RW.c"
|
||||
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
@ -1 +1 @@
|
||||
<AVRStudio><MANAGEMENT><ProjectName>%TARGET%</ProjectName><Created>%CREATED%</Created><LastEdit>%CREATED%</LastEdit><ICON>241</ICON><ProjectType>0</ProjectType><Created>%CREATED%</Created><Version>4</Version><Build>4, 18, 0, 685</Build><ProjectTypeName>AVR GCC</ProjectTypeName></MANAGEMENT><CODE_CREATION><ObjectFile>%TARGET%.elf</ObjectFile><EntryFile></EntryFile></CODE_CREATION><DEBUG_TARGET><CURRENT_TARGET></CURRENT_TARGET><CURRENT_PART></CURRENT_PART><BREAKPOINTS></BREAKPOINTS><IO_EXPAND><HIDE>false</HIDE></IO_EXPAND><REGISTERNAMES><Register>R00</Register><Register>R01</Register><Register>R02</Register><Register>R03</Register><Register>R04</Register><Register>R05</Register><Register>R06</Register><Register>R07</Register><Register>R08</Register><Register>R09</Register><Register>R10</Register><Register>R11</Register><Register>R12</Register><Register>R13</Register><Register>R14</Register><Register>R15</Register><Register>R16</Register><Register>R17</Register><Register>R18</Register><Register>R19</Register><Register>R20</Register><Register>R21</Register><Register>R22</Register><Register>R23</Register><Register>R24</Register><Register>R25</Register><Register>R26</Register><Register>R27</Register><Register>R28</Register><Register>R29</Register><Register>R30</Register><Register>R31</Register></REGISTERNAMES><COM></COM><COMType>0</COMType><WATCHNUM>0</WATCHNUM><WATCHNAMES><Pane0></Pane0><Pane1></Pane1><Pane2></Pane2><Pane3></Pane3></WATCHNAMES><BreakOnTrcaeFull>0</BreakOnTrcaeFull></DEBUG_TARGET><Debugger><Triggers></Triggers></Debugger><AVRGCCPLUGIN><FILES>%FILE_LIST%</FILES><CONFIGS><CONFIG><NAME>default</NAME><USESEXTERNALMAKEFILE>YES</USESEXTERNALMAKEFILE><EXTERNALMAKEFILE>makefile</EXTERNALMAKEFILE><PART>atmega128</PART><HEX>1</HEX><LIST>1</LIST><MAP>1</MAP><OUTPUTFILENAME>BootloaderCDC.elf</OUTPUTFILENAME><OUTPUTDIR>default\</OUTPUTDIR><ISDIRTY>1</ISDIRTY><OPTIONS/><INCDIRS/><LIBDIRS/><LIBS/><LINKOBJECTS/><OPTIONSFORALL>-Wall -gdwarf-2 -std=gnu99 -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums</OPTIONSFORALL><LINKEROPTIONS></LINKEROPTIONS><SEGMENTS/></CONFIG></CONFIGS><LASTCONFIG>default</LASTCONFIG><USES_WINAVR>1</USES_WINAVR><GCC_LOC>C:\WinAVR-20100110\bin\avr-gcc.exe</GCC_LOC><MAKE_LOC>C:\WinAVR-20100110\utils\bin\make.exe</MAKE_LOC></AVRGCCPLUGIN><ProjectFiles><Files>%GCC_FILE_LIST%</Files></ProjectFiles><IOView><usergroups/><sort sorted="0" column="0" ordername="0" orderaddress="0" ordergroup="0"/></IOView><Files></Files><Events><Bookmarks></Bookmarks></Events><Trace><Filters></Filters></Trace></AVRStudio>
|
||||
<AVRStudio><MANAGEMENT><ProjectName>%TARGET%</ProjectName><Created>%CREATED%</Created><LastEdit>%CREATED%</LastEdit><ICON>241</ICON><ProjectType>0</ProjectType><Created>%CREATED%</Created><Version>4</Version><Build>4, 18, 0, 685</Build><ProjectTypeName>AVR GCC</ProjectTypeName></MANAGEMENT><CODE_CREATION><ObjectFile>%TARGET%.elf</ObjectFile><EntryFile></EntryFile></CODE_CREATION><DEBUG_TARGET><CURRENT_TARGET></CURRENT_TARGET><CURRENT_PART></CURRENT_PART><BREAKPOINTS></BREAKPOINTS><IO_EXPAND><HIDE>false</HIDE></IO_EXPAND><REGISTERNAMES><Register>R00</Register><Register>R01</Register><Register>R02</Register><Register>R03</Register><Register>R04</Register><Register>R05</Register><Register>R06</Register><Register>R07</Register><Register>R08</Register><Register>R09</Register><Register>R10</Register><Register>R11</Register><Register>R12</Register><Register>R13</Register><Register>R14</Register><Register>R15</Register><Register>R16</Register><Register>R17</Register><Register>R18</Register><Register>R19</Register><Register>R20</Register><Register>R21</Register><Register>R22</Register><Register>R23</Register><Register>R24</Register><Register>R25</Register><Register>R26</Register><Register>R27</Register><Register>R28</Register><Register>R29</Register><Register>R30</Register><Register>R31</Register></REGISTERNAMES><COM></COM><COMType>0</COMType><WATCHNUM>0</WATCHNUM><WATCHNAMES><Pane0></Pane0><Pane1></Pane1><Pane2></Pane2><Pane3></Pane3></WATCHNAMES><BreakOnTrcaeFull>0</BreakOnTrcaeFull></DEBUG_TARGET><Debugger><Triggers></Triggers></Debugger><AVRGCCPLUGIN><FILES>%FILE_LIST%</FILES><CONFIGS><CONFIG><NAME>default</NAME><USESEXTERNALMAKEFILE>YES</USESEXTERNALMAKEFILE><EXTERNALMAKEFILE>makefile</EXTERNALMAKEFILE><PART>atmega128</PART><HEX>1</HEX><LIST>1</LIST><MAP>1</MAP><OUTPUTFILENAME>BootloaderCDC.elf</OUTPUTFILENAME><OUTPUTDIR>default\</OUTPUTDIR><ISDIRTY>1</ISDIRTY><OPTIONS/><INCDIRS/><LIBDIRS/><LIBS/><LINKOBJECTS/><OPTIONSFORALL>-Wall -gdwarf-2 -std=gnu99 -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums</OPTIONSFORALL><LINKEROPTIONS></LINKEROPTIONS><SEGMENTS/></CONFIG></CONFIGS><LASTCONFIG>default</LASTCONFIG><USES_WINAVR>1</USES_WINAVR><GCC_LOC>C:\WinAVR-20100110\bin\avr-gcc.exe</GCC_LOC><MAKE_LOC>C:\WinAVR-20100110\utils\bin\make.exe</MAKE_LOC></AVRGCCPLUGIN><ProjectFiles><Files>%GCC_FILE_LIST%</Files></ProjectFiles><IOView><usergroups/><sort sorted="0" column="0" ordername="0" orderaddress="0" ordergroup="0"/></IOView><Files></Files><Events><Bookmarks></Bookmarks></Events><Trace><Filters></Filters></Trace></AVRStudio>
|
||||
|
||||
@ -1,91 +1,91 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Maintenance scripts not required by general LUFA users, used for project development purposes.
|
||||
|
||||
|
||||
# Path to the root of the LUFA tree
|
||||
LUFA_ROOT = ../
|
||||
|
||||
all:
|
||||
|
||||
# Update all Doxygen configuration files to the latest Doxygen version - force Markdown support to be disabled
|
||||
upgrade-doxygen:
|
||||
@echo Upgrading Doxygen.conf files...
|
||||
@for doxygen_conf in `find $(LUFA_ROOT) -name Doxygen.conf`; do \
|
||||
doxygen -u $$doxygen_conf; \
|
||||
sed "s/MARKDOWN_SUPPORT *= *YES/MARKDOWN_SUPPORT = NO/1" $$doxygen_conf > $$doxygen_conf.new; \
|
||||
sed "s/DISABLE_INDEX *= *NO/DISABLE_INDEX = YES/1" $$doxygen_conf.new > $$doxygen_conf.new2; \
|
||||
mv -u $$doxygen_conf.new2 $$doxygen_conf; \
|
||||
rm $$doxygen_conf.new; \
|
||||
done;
|
||||
@echo Doxygen configuration update complete.
|
||||
|
||||
# Generate AVR Studio 4 project files for each project from a template
|
||||
make-as4-projects:
|
||||
@echo Creating AVR Studio 4 project files for Demos...
|
||||
@for project_makefile in `find $(LUFA_ROOT)/Demos $(LUFA_ROOT)/Projects $(LUFA_ROOT)/Bootloaders -name makefile*`; do \
|
||||
target_name=`grep "TARGET *=" $$project_makefile | cut -d'=' -f2 | sed 's/ //g'`; \
|
||||
target_folder=`dirname $$project_makefile`; \
|
||||
as4_date=`date "+%-e-%b-%Y %-H:%-M:%-S"`; \
|
||||
\
|
||||
if ( test -n "$$target_name" ); then \
|
||||
echo Creating AS4 project for project $$target_name; \
|
||||
\
|
||||
source_files="<OTHERFILE>`basename $$project_makefile`<\/OTHERFILE>"; \
|
||||
gcc_source_files=""; \
|
||||
for c_source_file in `find $$target_folder -name *.c`; do \
|
||||
source_filename=`basename $$c_source_file`; \
|
||||
\
|
||||
source_files="$$source_files<SOURCEFILE>$$source_filename<\/SOURCEFILE>"; \
|
||||
gcc_source_files="$$gcc_source_files<Name>$$source_filename<\/Name>"; \
|
||||
done; \
|
||||
for c_header_file in `find $$target_folder -name *.h`; do \
|
||||
source_filename=`basename $$c_header_file`; \
|
||||
\
|
||||
source_files="$$source_files<HEADERFILE>$$source_filename<\/HEADERFILE>"; \
|
||||
gcc_source_files="$$gcc_source_files<Name>$$source_filename<\/Name>"; \
|
||||
done; \
|
||||
for assembly_file in `find $$target_folder -name *.S`; do \
|
||||
source_filename=`basename $$assembly_file`; \
|
||||
\
|
||||
source_files="$$source_files<OTHERFILE>$$source_filename<\/OTHERFILE>"; \
|
||||
gcc_source_files="$$gcc_source_files<Name>$$source_filename<\/Name>"; \
|
||||
done; \
|
||||
\
|
||||
sed "s/%TARGET%/$$target_name/g" AS4Template.aps > $$target_folder/$$target_name.aps.new; \
|
||||
sed "s/%CREATED%/$$as4_date/g" $$target_folder/$$target_name.aps.new > $$target_folder/$$target_name.aps.new2; \
|
||||
sed "s/%FILE_LIST%/$$source_files/g" $$target_folder/$$target_name.aps.new2 > $$target_folder/$$target_name.aps.new3; \
|
||||
sed "s/%GCC_FILE_LIST%/$$gcc_source_files/g" $$target_folder/$$target_name.aps.new3 > $$target_folder/$$target_name.aps.new4; \
|
||||
mv $$target_folder/$$target_name.aps.new4 $$target_folder/$$target_name.aps; \
|
||||
rm $$target_folder/$$target_name.aps.new $$target_folder/$$target_name.aps.new2 $$target_folder/$$target_name.aps.new3; \
|
||||
fi; \
|
||||
done;
|
||||
@echo AVR Studio 4 project generation complete.
|
||||
|
||||
# Check the working branch documentation, ensure no placeholder values
|
||||
check-documentation-placeholders:
|
||||
@echo Checking for release suitability...
|
||||
@if ( grep "XXXXXX" $(LUFA_ROOT)/LUFA/DoxygenPages/*.txt > /dev/null ;); then \
|
||||
echo " ERROR: Doxygen documentation has not been updated for release!"; \
|
||||
exit 1; \
|
||||
fi;
|
||||
@if ( grep "000000" $(LUFA_ROOT)/LUFA/Version.h > /dev/null ;); then \
|
||||
echo " ERROR: Version header has not been updated for release!"; \
|
||||
exit 1; \
|
||||
fi;
|
||||
@echo Done.
|
||||
|
||||
# Validate the working branch - compile all documentation, demos/projects/examples and run build tests
|
||||
validate-branch:
|
||||
make -C $(LUFA_ROOT) doxygen
|
||||
make -C $(LUFA_ROOT) all
|
||||
make -C $(LUFA_ROOT)/BuildTests all
|
||||
|
||||
# Validate the working branch for general release, check for placeholder documentation then build and test everything
|
||||
validate-release: check-documentation-placeholders validate-branch
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
|
||||
# Maintenance scripts not required by general LUFA users, used for project development purposes.
|
||||
|
||||
|
||||
# Path to the root of the LUFA tree
|
||||
LUFA_ROOT = ../
|
||||
|
||||
all:
|
||||
|
||||
# Update all Doxygen configuration files to the latest Doxygen version - force Markdown support to be disabled
|
||||
upgrade-doxygen:
|
||||
@echo Upgrading Doxygen.conf files...
|
||||
@for doxygen_conf in `find $(LUFA_ROOT) -name Doxygen.conf`; do \
|
||||
doxygen -u $$doxygen_conf; \
|
||||
sed "s/MARKDOWN_SUPPORT *= *YES/MARKDOWN_SUPPORT = NO/1" $$doxygen_conf > $$doxygen_conf.new; \
|
||||
sed "s/DISABLE_INDEX *= *NO/DISABLE_INDEX = YES/1" $$doxygen_conf.new > $$doxygen_conf.new2; \
|
||||
mv -u $$doxygen_conf.new2 $$doxygen_conf; \
|
||||
rm $$doxygen_conf.new; \
|
||||
done;
|
||||
@echo Doxygen configuration update complete.
|
||||
|
||||
# Generate AVR Studio 4 project files for each project from a template
|
||||
make-as4-projects:
|
||||
@echo Creating AVR Studio 4 project files for Demos...
|
||||
@for project_makefile in `find $(LUFA_ROOT)/Demos $(LUFA_ROOT)/Projects $(LUFA_ROOT)/Bootloaders -name makefile*`; do \
|
||||
target_name=`grep "TARGET *=" $$project_makefile | cut -d'=' -f2 | sed 's/ //g'`; \
|
||||
target_folder=`dirname $$project_makefile`; \
|
||||
as4_date=`date "+%-e-%b-%Y %-H:%-M:%-S"`; \
|
||||
\
|
||||
if ( test -n "$$target_name" ); then \
|
||||
echo Creating AS4 project for project $$target_name; \
|
||||
\
|
||||
source_files="<OTHERFILE>`basename $$project_makefile`<\/OTHERFILE>"; \
|
||||
gcc_source_files=""; \
|
||||
for c_source_file in `find $$target_folder -name *.c`; do \
|
||||
source_filename=`basename $$c_source_file`; \
|
||||
\
|
||||
source_files="$$source_files<SOURCEFILE>$$source_filename<\/SOURCEFILE>"; \
|
||||
gcc_source_files="$$gcc_source_files<Name>$$source_filename<\/Name>"; \
|
||||
done; \
|
||||
for c_header_file in `find $$target_folder -name *.h`; do \
|
||||
source_filename=`basename $$c_header_file`; \
|
||||
\
|
||||
source_files="$$source_files<HEADERFILE>$$source_filename<\/HEADERFILE>"; \
|
||||
gcc_source_files="$$gcc_source_files<Name>$$source_filename<\/Name>"; \
|
||||
done; \
|
||||
for assembly_file in `find $$target_folder -name *.S`; do \
|
||||
source_filename=`basename $$assembly_file`; \
|
||||
\
|
||||
source_files="$$source_files<OTHERFILE>$$source_filename<\/OTHERFILE>"; \
|
||||
gcc_source_files="$$gcc_source_files<Name>$$source_filename<\/Name>"; \
|
||||
done; \
|
||||
\
|
||||
sed "s/%TARGET%/$$target_name/g" AS4Template.aps > $$target_folder/$$target_name.aps.new; \
|
||||
sed "s/%CREATED%/$$as4_date/g" $$target_folder/$$target_name.aps.new > $$target_folder/$$target_name.aps.new2; \
|
||||
sed "s/%FILE_LIST%/$$source_files/g" $$target_folder/$$target_name.aps.new2 > $$target_folder/$$target_name.aps.new3; \
|
||||
sed "s/%GCC_FILE_LIST%/$$gcc_source_files/g" $$target_folder/$$target_name.aps.new3 > $$target_folder/$$target_name.aps.new4; \
|
||||
mv $$target_folder/$$target_name.aps.new4 $$target_folder/$$target_name.aps; \
|
||||
rm $$target_folder/$$target_name.aps.new $$target_folder/$$target_name.aps.new2 $$target_folder/$$target_name.aps.new3; \
|
||||
fi; \
|
||||
done;
|
||||
@echo AVR Studio 4 project generation complete.
|
||||
|
||||
# Check the working branch documentation, ensure no placeholder values
|
||||
check-documentation-placeholders:
|
||||
@echo Checking for release suitability...
|
||||
@if ( grep "XXXXXX" $(LUFA_ROOT)/LUFA/DoxygenPages/*.txt > /dev/null ;); then \
|
||||
echo " ERROR: Doxygen documentation has not been updated for release!"; \
|
||||
exit 1; \
|
||||
fi;
|
||||
@if ( grep "000000" $(LUFA_ROOT)/LUFA/Version.h > /dev/null ;); then \
|
||||
echo " ERROR: Version header has not been updated for release!"; \
|
||||
exit 1; \
|
||||
fi;
|
||||
@echo Done.
|
||||
|
||||
# Validate the working branch - compile all documentation, demos/projects/examples and run build tests
|
||||
validate-branch:
|
||||
make -C $(LUFA_ROOT) doxygen
|
||||
make -C $(LUFA_ROOT) all
|
||||
make -C $(LUFA_ROOT)/BuildTests all
|
||||
|
||||
# Validate the working branch for general release, check for placeholder documentation then build and test everything
|
||||
validate-release: check-documentation-placeholders validate-branch
|
||||
|
||||
@ -1,97 +1,97 @@
|
||||
/** \file
|
||||
*
|
||||
* This file contains special DoxyGen information for the generation of the main page and other special
|
||||
* documentation pages. It is not a project source file.
|
||||
*/
|
||||
|
||||
/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project
|
||||
*
|
||||
* \section Sec_Compat Project Compatibility:
|
||||
*
|
||||
* The following list indicates what microcontrollers are compatible with this project.
|
||||
*
|
||||
* \li AT90USB162
|
||||
*
|
||||
* \section Sec_Info USB Information:
|
||||
*
|
||||
* The following table gives a rundown of the USB utilization of this project.
|
||||
*
|
||||
* <table>
|
||||
* <tr>
|
||||
* <td><b>USB Mode:</b></td>
|
||||
* <td>Device</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>USB Class:</b></td>
|
||||
* <td>Communications Device Class (CDC)</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>USB Subclass:</b></td>
|
||||
* <td>Abstract Control Model (ACM)</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>Relevant Standards:</b></td>
|
||||
* <td>USBIF CDC Class Standard</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>Supported USB Speeds:</b></td>
|
||||
* <td>Full Speed Mode</td>
|
||||
* </tr>
|
||||
* </table>
|
||||
*
|
||||
* \section Sec_Description Project Description:
|
||||
*
|
||||
* Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This
|
||||
* project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial
|
||||
* link, so that data supplied by the host can be written to the display. This project is
|
||||
* designed to use the Minimum USB AVR board, however it can be modified to suit other hardware
|
||||
* if desired.
|
||||
*
|
||||
* LCD Datasheet: http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n
|
||||
* More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n
|
||||
*
|
||||
* Below are the connections between the AVR Minimus board and LCD.
|
||||
*
|
||||
* <table>
|
||||
* <tr>
|
||||
* <td><b>AVR Pin:</b></td>
|
||||
* <td><b>HD44780 LCD Pin:</b></td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>VCC</td>
|
||||
* <td>VCC</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>GND</td>
|
||||
* <td>GND</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD0</td>
|
||||
* <td>DB4</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD1</td>
|
||||
* <td>DB5</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD2</td>
|
||||
* <td>DB6</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD3</td>
|
||||
* <td>DB7</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD4</td>
|
||||
* <td>/RS</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>GND</td>
|
||||
* <td>/RW</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD7</td>
|
||||
* <td>/E</td>
|
||||
* </tr>
|
||||
* </table>
|
||||
*/
|
||||
/** \file
|
||||
*
|
||||
* This file contains special DoxyGen information for the generation of the main page and other special
|
||||
* documentation pages. It is not a project source file.
|
||||
*/
|
||||
|
||||
/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project
|
||||
*
|
||||
* \section Sec_Compat Project Compatibility:
|
||||
*
|
||||
* The following list indicates what microcontrollers are compatible with this project.
|
||||
*
|
||||
* \li AT90USB162
|
||||
*
|
||||
* \section Sec_Info USB Information:
|
||||
*
|
||||
* The following table gives a rundown of the USB utilization of this project.
|
||||
*
|
||||
* <table>
|
||||
* <tr>
|
||||
* <td><b>USB Mode:</b></td>
|
||||
* <td>Device</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>USB Class:</b></td>
|
||||
* <td>Communications Device Class (CDC)</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>USB Subclass:</b></td>
|
||||
* <td>Abstract Control Model (ACM)</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>Relevant Standards:</b></td>
|
||||
* <td>USBIF CDC Class Standard</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td><b>Supported USB Speeds:</b></td>
|
||||
* <td>Full Speed Mode</td>
|
||||
* </tr>
|
||||
* </table>
|
||||
*
|
||||
* \section Sec_Description Project Description:
|
||||
*
|
||||
* Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This
|
||||
* project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial
|
||||
* link, so that data supplied by the host can be written to the display. This project is
|
||||
* designed to use the Minimum USB AVR board, however it can be modified to suit other hardware
|
||||
* if desired.
|
||||
*
|
||||
* LCD Datasheet: http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n
|
||||
* More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n
|
||||
*
|
||||
* Below are the connections between the AVR Minimus board and LCD.
|
||||
*
|
||||
* <table>
|
||||
* <tr>
|
||||
* <td><b>AVR Pin:</b></td>
|
||||
* <td><b>HD44780 LCD Pin:</b></td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>VCC</td>
|
||||
* <td>VCC</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>GND</td>
|
||||
* <td>GND</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD0</td>
|
||||
* <td>DB4</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD1</td>
|
||||
* <td>DB5</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD2</td>
|
||||
* <td>DB6</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD3</td>
|
||||
* <td>DB7</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD4</td>
|
||||
* <td>/RS</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>GND</td>
|
||||
* <td>/RW</td>
|
||||
* </tr>
|
||||
* <tr>
|
||||
* <td>PD7</td>
|
||||
* <td>/E</td>
|
||||
* </tr>
|
||||
* </table>
|
||||
*/
|
||||
|
||||
@ -1,35 +1,35 @@
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
MCU = at90usb162
|
||||
ARCH = AVR8
|
||||
BOARD = MINIMUS
|
||||
F_CPU = 16000000
|
||||
F_USB = $(F_CPU)
|
||||
OPTIMIZATION = s
|
||||
TARGET = SerialToLCD
|
||||
SRC = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
|
||||
LUFA_PATH = ../../LUFA/
|
||||
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/
|
||||
LD_FLAGS =
|
||||
|
||||
# Default target
|
||||
all:
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
include $(LUFA_PATH)/Build/lufa.sources.in
|
||||
include $(LUFA_PATH)/Build/lufa.build.in
|
||||
include $(LUFA_PATH)/Build/lufa.cppcheck.in
|
||||
include $(LUFA_PATH)/Build/lufa.doxygen.in
|
||||
include $(LUFA_PATH)/Build/lufa.dfu.in
|
||||
include $(LUFA_PATH)/Build/lufa.avrdude.in
|
||||
include $(LUFA_PATH)/Build/lufa.atprogram.in
|
||||
#
|
||||
# LUFA Library
|
||||
# Copyright (C) Dean Camera, 2012.
|
||||
#
|
||||
# dean [at] fourwalledcubicle [dot] com
|
||||
# www.lufa-lib.org
|
||||
#
|
||||
# --------------------------------------
|
||||
# LUFA Project Makefile.
|
||||
# --------------------------------------
|
||||
|
||||
MCU = at90usb162
|
||||
ARCH = AVR8
|
||||
BOARD = MINIMUS
|
||||
F_CPU = 16000000
|
||||
F_USB = $(F_CPU)
|
||||
OPTIMIZATION = s
|
||||
TARGET = SerialToLCD
|
||||
SRC = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
|
||||
LUFA_PATH = ../../LUFA/
|
||||
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/
|
||||
LD_FLAGS =
|
||||
|
||||
# Default target
|
||||
all:
|
||||
|
||||
# Include LUFA build script makefiles
|
||||
include $(LUFA_PATH)/Build/lufa.core.in
|
||||
include $(LUFA_PATH)/Build/lufa.sources.in
|
||||
include $(LUFA_PATH)/Build/lufa.build.in
|
||||
include $(LUFA_PATH)/Build/lufa.cppcheck.in
|
||||
include $(LUFA_PATH)/Build/lufa.doxygen.in
|
||||
include $(LUFA_PATH)/Build/lufa.dfu.in
|
||||
include $(LUFA_PATH)/Build/lufa.avrdude.in
|
||||
include $(LUFA_PATH)/Build/lufa.atprogram.in
|
||||
|
||||
Loading…
Reference in new issue