forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fixed TeensyHID bootloader not enumerating to the host correctly.

Browse Source
pull/1469/head
Dean Camera 15 years ago
parent b408a5fe62
commit 77cd3a42a7
5 changed files with 46 additions and 50 deletions
Show Stats Download Patch File Download Diff File

77
Bootloaders/TeensyHID/TeensyHID.c
Unescape View File

@ -52,12 +52,12 @@ int main(void)
while (RunBootloader)
USB_USBTask();
/* Turn off the USB interface, disconnect from the host */
USB_ShutDown();
/* Disconnect from the host - USB interface will be reset later along with the AVR */
USB_Detach();
/* Enable the watchdog and force a timeout to reset the AVR */
wdt_enable(WDTO_250MS);
for (;;);
}
@ -100,53 +100,50 @@ void EVENT_USB_Device_UnhandledControlRequest(void)
switch (USB_ControlRequest.bRequest)
{
case REQ_SetReport:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
/* Wait until the command has been sent by the host */
while (!(Endpoint_IsOUTReceived()));
Endpoint_ClearSETUP();
/* Read in the write destination address */
uint16_t PageAddress = Endpoint_Read_Word_LE();
/* Wait until the command has been sent by the host */
while (!(Endpoint_IsOUTReceived()));
/* Read in the write destination address */
uint16_t PageAddress = Endpoint_Read_Word_LE();
/* Check if the command is a program page command, or a start application command */
if (PageAddress == TEENSY_STARTAPPLICATION)
{
RunBootloader = false;
}
else
{
/* Erase the given FLASH page, ready to be programmed */
boot_page_erase(PageAddress);
boot_spm_busy_wait();
/* Check if the command is a program page command, or a start application command */
if (PageAddress == TEENSY_STARTAPPLICATION)
{
RunBootloader = false;
}
else
/* Write each of the FLASH page's bytes in sequence */
for (uint8_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2)
{
/* Erase the given FLASH page, ready to be programmed */
boot_page_erase(PageAddress);
boot_spm_busy_wait();
/* Write each of the FLASH page's bytes in sequence */
for (uint8_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2)
/* Check if endpoint is empty - if so clear it and wait until ready for next packet */
if (!(Endpoint_BytesInEndpoint()))
{
/* Check if endpoint is empty - if so clear it and wait until ready for next packet */
if (!(Endpoint_BytesInEndpoint()))
{
Endpoint_ClearOUT();
while (!(Endpoint_IsOUTReceived()));
}
/* Write the next data word to the FLASH page */
boot_page_fill(PageAddress + PageByte, Endpoint_Read_Word_LE());
Endpoint_ClearOUT();
while (!(Endpoint_IsOUTReceived()));
}
/* Write the filled FLASH page to memory */
boot_page_write(PageAddress);
boot_spm_busy_wait();
/* Re-enable RWW section */
boot_rww_enable();
/* Write the next data word to the FLASH page */
boot_page_fill(PageAddress + PageByte, Endpoint_Read_Word_LE());
}
Endpoint_ClearOUT();
/* Write the filled FLASH page to memory */
boot_page_write(PageAddress);
boot_spm_busy_wait();
Endpoint_ClearStatusStage();
/* Re-enable RWW section */
boot_rww_enable();
}
Endpoint_ClearOUT();
Endpoint_ClearStatusStage();
break;
}

5
Bootloaders/TeensyHID/TeensyHID.h
Unescape View File

@ -49,11 +49,6 @@
#include <LUFA/Drivers/USB/USB.h>
/* Preprocessor Checks: */
#if !defined(__AVR_AT90USB162__) && !defined(__AVR_AT90USB646__)
#error This bootloader is not compatible with the selected AVR model.
#endif
/* Macros: */
/** HID Class specific request to send the next HID report to the device. */
#define REQ_SetReport 0x09

8
Bootloaders/TeensyHID/TeensyHID.txt
Unescape View File

@ -10,8 +10,10 @@
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* - AT90USB646
* - AT90USB162
* - ATMEGA32U4
* - AT90USB646
* - AT90USB1286
*
* \section SSec_Info USB Information:
*
@ -47,7 +49,9 @@
* This bootloader enumerates to the host as a HID Class device, allowing for Teensy compatible programming
* software to load firmware onto the AVR, such as the official software at <a>http://www.pjrc.com/teensy/</a>.
*
* Out of the box this bootloader builds for the AT90USB162, and will fit into 4KB of bootloader space.
* Out of the box this bootloader builds for the ATMEGA32U4, and will fit into 4KB of bootloader space. For other
* devices, the makefile will need to be updated to reflect the altered MCU model and bootloader start address. When
* calculating the bootloader start address, use (TARGET_FLASH_SIZE_BYTES - 4096).
*
* This spoofs (with permission) the official Teensy bootloader's VID and PID, so that the software remains
* compatible with no changes.

5
Bootloaders/TeensyHID/makefile
Unescape View File

@ -60,7 +60,7 @@
# MCU name
MCU = at90usb162
MCU = atmega32u4
# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
@ -98,7 +98,7 @@ F_CLOCK = $(F_CPU)
# Starting byte address of the bootloader
BOOT_START = 0xC000
BOOT_START = 0x7000
# Output format. (can be srec, ihex, binary)
@ -121,7 +121,6 @@ LUFA_PATH = ../..
# LUFA library compile-time options
LUFA_OPTS = -D USB_DEVICE_ONLY
LUFA_OPTS += -D CONTROL_ONLY_DEVICE
LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1

1
LUFA/ManPages/ChangeLog.txt
Unescape View File

@ -66,6 +66,7 @@
* - Fixed Still Image Host Class driver truncating the PIMA response code (thanks to Daniel Seibert)
* - Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be
* used (thanks to Daniel Levy)
* - Fixed TeensyHID bootloader not enumerating to the host correctly
*
* \section Sec_ChangeLog091122 Version 091122
*

Write Preview
Loading…
Cancel
Save