tmk
14 years ago
parent
6be0e4fafb
commit
7fd9003f59
@ -0,0 +1,80 @@
|
||||
#include <avr/interrupt.h>
|
||||
#include "usb_debug.h"
|
||||
|
||||
|
||||
// the time remaining before we transmit any partially full
|
||||
// packet, or send a zero length packet.
|
||||
volatile uint8_t debug_flush_timer=0;
|
||||
|
||||
|
||||
// transmit a character. 0 returned on success, -1 on error
|
||||
int8_t usb_debug_putchar(uint8_t c)
|
||||
{
|
||||
static uint8_t previous_timeout=0;
|
||||
uint8_t timeout, intr_state;
|
||||
|
||||
// if we're not online (enumerated and configured), error
|
||||
if (!usb_configured()) return -1;
|
||||
// interrupts are disabled so these functions can be
|
||||
// used from the main program or interrupt context,
|
||||
// even both in the same program!
|
||||
intr_state = SREG;
|
||||
cli();
|
||||
UENUM = DEBUG_TX_ENDPOINT;
|
||||
// if we gave up due to timeout before, don't wait again
|
||||
if (previous_timeout) {
|
||||
if (!(UEINTX & (1<<RWAL))) {
|
||||
SREG = intr_state;
|
||||
return -1;
|
||||
}
|
||||
previous_timeout = 0;
|
||||
}
|
||||
// wait for the FIFO to be ready to accept data
|
||||
timeout = UDFNUML + 4;
|
||||
while (1) {
|
||||
// are we ready to transmit?
|
||||
if (UEINTX & (1<<RWAL)) break;
|
||||
SREG = intr_state;
|
||||
// have we waited too long?
|
||||
if (UDFNUML == timeout) {
|
||||
previous_timeout = 1;
|
||||
return -1;
|
||||
}
|
||||
// has the USB gone offline?
|
||||
if (!usb_configured()) return -1;
|
||||
// get ready to try checking again
|
||||
intr_state = SREG;
|
||||
cli();
|
||||
UENUM = DEBUG_TX_ENDPOINT;
|
||||
}
|
||||
// actually write the byte into the FIFO
|
||||
UEDATX = c;
|
||||
// if this completed a packet, transmit it now!
|
||||
if (!(UEINTX & (1<<RWAL))) {
|
||||
UEINTX = 0x3A;
|
||||
debug_flush_timer = 0;
|
||||
} else {
|
||||
debug_flush_timer = 2;
|
||||
}
|
||||
SREG = intr_state;
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
// immediately transmit any buffered output.
|
||||
void usb_debug_flush_output(void)
|
||||
{
|
||||
uint8_t intr_state;
|
||||
|
||||
intr_state = SREG;
|
||||
cli();
|
||||
if (debug_flush_timer) {
|
||||
UENUM = DEBUG_TX_ENDPOINT;
|
||||
while ((UEINTX & (1<<RWAL))) {
|
||||
UEDATX = 0;
|
||||
}
|
||||
UEINTX = 0x3A;
|
||||
debug_flush_timer = 0;
|
||||
}
|
||||
SREG = intr_state;
|
||||
}
|
||||
@ -0,0 +1,20 @@
|
||||
#ifndef USB_DEBUG_H
|
||||
#define USB_DEBUG_H 1
|
||||
|
||||
#include <stdint.h>
|
||||
#include "usb_device.h"
|
||||
|
||||
|
||||
#define DEBUG_INTERFACE 1
|
||||
#define DEBUG_TX_ENDPOINT 4
|
||||
#define DEBUG_TX_SIZE 32
|
||||
#define DEBUG_TX_BUFFER EP_DOUBLE_BUFFER
|
||||
|
||||
|
||||
extern volatile uint8_t debug_flush_timer;
|
||||
|
||||
|
||||
int8_t usb_debug_putchar(uint8_t c); // transmit a character
|
||||
void usb_debug_flush_output(void); // immediately transmit any buffered output
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,76 @@
|
||||
#include <avr/interrupt.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include "usb_keyboard.h"
|
||||
|
||||
|
||||
// which modifier keys are currently pressed
|
||||
// 1=left ctrl, 2=left shift, 4=left alt, 8=left gui
|
||||
// 16=right ctrl, 32=right shift, 64=right alt, 128=right gui
|
||||
uint8_t keyboard_modifier_keys=0;
|
||||
|
||||
// which keys are currently pressed, up to 6 keys may be down at once
|
||||
uint8_t keyboard_keys[6]={0,0,0,0,0,0};
|
||||
|
||||
// protocol setting from the host. We use exactly the same report
|
||||
// either way, so this variable only stores the setting since we
|
||||
// are required to be able to report which setting is in use.
|
||||
uint8_t keyboard_protocol=1;
|
||||
|
||||
// the idle configuration, how often we send the report to the
|
||||
// host (ms * 4) even when it hasn't changed
|
||||
uint8_t keyboard_idle_config=125;
|
||||
|
||||
// count until idle timeout
|
||||
uint8_t keyboard_idle_count=0;
|
||||
|
||||
// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
|
||||
volatile uint8_t keyboard_leds=0;
|
||||
|
||||
|
||||
// perform a single keystroke
|
||||
int8_t usb_keyboard_press(uint8_t key, uint8_t modifier)
|
||||
{
|
||||
int8_t r;
|
||||
|
||||
keyboard_modifier_keys = modifier;
|
||||
keyboard_keys[0] = key;
|
||||
r = usb_keyboard_send();
|
||||
if (r) return r;
|
||||
keyboard_modifier_keys = 0;
|
||||
keyboard_keys[0] = 0;
|
||||
return usb_keyboard_send();
|
||||
}
|
||||
|
||||
// send the contents of keyboard_keys and keyboard_modifier_keys
|
||||
int8_t usb_keyboard_send(void)
|
||||
{
|
||||
uint8_t i, intr_state, timeout;
|
||||
|
||||
if (!usb_configured()) return -1;
|
||||
intr_state = SREG;
|
||||
cli();
|
||||
UENUM = KEYBOARD_ENDPOINT;
|
||||
timeout = UDFNUML + 50;
|
||||
while (1) {
|
||||
// are we ready to transmit?
|
||||
if (UEINTX & (1<<RWAL)) break;
|
||||
SREG = intr_state;
|
||||
// has the USB gone offline?
|
||||
if (!usb_configured()) return -1;
|
||||
// have we waited too long?
|
||||
if (UDFNUML == timeout) return -1;
|
||||
// get ready to try checking again
|
||||
intr_state = SREG;
|
||||
cli();
|
||||
UENUM = KEYBOARD_ENDPOINT;
|
||||
}
|
||||
UEDATX = keyboard_modifier_keys;
|
||||
UEDATX = 0;
|
||||
for (i=0; i<6; i++) {
|
||||
UEDATX = keyboard_keys[i];
|
||||
}
|
||||
UEINTX = 0x3A;
|
||||
keyboard_idle_count = 0;
|
||||
SREG = intr_state;
|
||||
return 0;
|
||||
}
|
||||
@ -0,0 +1,25 @@
|
||||
#ifndef USB_KEYBOARD_H
|
||||
#define USB_KEYBOARD_H 1
|
||||
|
||||
#include <stdint.h>
|
||||
#include "usb_device.h"
|
||||
|
||||
|
||||
#define KEYBOARD_INTERFACE 0
|
||||
#define KEYBOARD_ENDPOINT 3
|
||||
#define KEYBOARD_SIZE 8
|
||||
#define KEYBOARD_BUFFER EP_DOUBLE_BUFFER
|
||||
|
||||
|
||||
extern uint8_t keyboard_modifier_keys;
|
||||
extern uint8_t keyboard_keys[6];
|
||||
extern uint8_t keyboard_protocol;
|
||||
extern uint8_t keyboard_idle_config;
|
||||
extern uint8_t keyboard_idle_count;
|
||||
extern volatile uint8_t keyboard_leds;
|
||||
|
||||
|
||||
int8_t usb_keyboard_press(uint8_t key, uint8_t modifier);
|
||||
int8_t usb_keyboard_send(void);
|
||||
|
||||
#endif
|
||||
Loading…
Reference in new issue