From f661d86d971d2ab1362aa799cb0c16dcbcb4bafa Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Sat, 20 Apr 2019 07:05:51 +0900 Subject: [PATCH 1/5] Add function to support split-keyboard in rgblight.[ch]. (#5020) * add temporary file that is rgblight.c call graph * add rgblight_update_hook() * update rgblight-call-graph.dot (temporary file) * add more hook point * add TODO comment * temporary Revert "add TODO comment" This reverts commit df6165aac9b3a31d1d3e31ce52aadc134b84eac2. * temporary Revert "add more hook point" This reverts commit 64592b06f3bcdaac47c59f922018a273bef76776. * temporary Revert "add rgblight_update_hook()" This reverts commit 432b74c912ed4333e6633e20a1bcda10c6a10eaf. * add rgblight_update_hook() * add more hook point * add TODO comment * implement rgblight_update_hook() * remove rgblight_update_hook(), add RGBLIGHT_SPLIT_SET_CHANGE_XXXX rgblight_update_hook() is too large. change to simple flag setting. * shrink rgblight_config_t * implement rgblight_update_sync() Note: The animation synchronization process has not been implemented yet. * update quantum/rgblight-call-graph.dot (temporary file) * rmove quantum/rgblight-call-graph.dot (temporary file) * update rgblight.c * Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c . * fix build break rgblight_update_sync() when all animation off * fix quantum/rgblight.c:rgblight_disable_XX() add RGBLIGHT_SPLIT_SET_CHANGE_MODE * quantum/rgblight.c change code order: move rgblight_update_sync() * add mode_base_table[] to quantum/rgblight.c * quantum/rgblight.c use mode_base_table[] and rgblight_status.base_mode * quantum/rgblkght.c animation timer integration * quantum/rgblkght.c add animation sync for split keyboard * fix mode_base_table[] and snake effect * fix build break keyboards/mxss. keyboards/mxss's local rgblight.c need old version rgblight.h * rgblight.c: fix animation sync * quantum/rgblight.c: fix snake effect sync * quantum/rgblight.c: animation sync interverl 30 sec * quantum/rgblight.c: fix rgblight_effect_rainbow_swirl() and rgblight_effect_knight() * quantum/rgblight.c: add macro RGBLIGHT_SPLIT_ANIMATION * cherry-pick from 'rgblight_modes.h sample implementation' * fix RGBLIGHT_SPLIT_ANIMATION check position * Update temporary code in Helix keyboard 'five_rows' keymap to test rgblight.c * Reduce the firmware size by 1500 bytes when rgblight_effect_breathing() is enabled. * Changed to rgblight_sethsv_eeprom_helper() for easier reading. * add fail-safe code to quantum/rgblight.c:rgblight_task(),rgblight_timer_enable() * remove temporary code in Helix keyboard 'five_rows' keymap * quantum/rgblight.c: add split-keyboard master side sync functions add functions: uint8_t rgblight_get_change_flags(void); void rgblight_clear_change_flags(void); void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo); change function: void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom); * Change rgblight_update_sync() to use write_to_eeprom. * remove TODO comment from quantum/rgblight.h * Revert "fix build break keyboards/mxss." This reverts commit 90b9a1aa7d8af226751500e49e3ea0214cc4e024. (Separated this change into the newly opened PR #5461.) * Revert "Reduce the firmware size by 1500 bytes when rgblight_effect_breathing() is enabled." This reverts commit b61004e63e82cf5334cee4def4ba10cffa88885f. * update quantum/rgblight.c: Code size reduction when not using RGBLIGHT_SPLIT. * Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c . * add temporary pdhelix(Patched Helix) code * Add temporary code to split_common/transport.c to test rgblight.c. * Finish testing rgblight.c with helix keyboard. Revert "Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c ." This reverts commit 0bf81a4723a977adc0cb09b4272ee5c9b4f2bbbb. * Finish testing rgblight.c with quantum/split_common code. Revert "Add temporary code to split_common/transport.c to test rgblight.c." This reverts commit 71db3e24eef40d4c455fb9fd1664e4487c9d927a. * remove temporary pdhelix(Patched Helix) code This reverts commit 5287e51a394741bcb6028c7cfc0dd0c984645f76. * Added description of RGBLIGHT_SPLIT macro to docs/feature_rgblight.md. * add RGBLIGHT_SPLIT_SET_CHANGE_HSVS to rgblight_init() * Changed to restart animation only when changing mode. When changing hue, sat and val, the animation is not restarted and continues. --- quantum/rgblight.c | 390 ++++++++++++++++++++++++++------------- quantum/rgblight.h | 134 ++++++-------- quantum/rgblight_modes.h | 67 +++++++ 3 files changed, 383 insertions(+), 208 deletions(-) create mode 100644 quantum/rgblight_modes.h diff --git a/quantum/rgblight.c b/quantum/rgblight.c index e2410424e4..5ec11bc077 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -34,14 +34,38 @@ #include "velocikey.h" #endif +#ifdef RGBLIGHT_SPLIT + /* for split keyboard */ + #define RGBLIGHT_SPLIT_SET_CHANGE_MODE rgblight_status.change_flags |= RGBLIGHT_STATUS_CHANGE_MODE + #define RGBLIGHT_SPLIT_SET_CHANGE_HSVS rgblight_status.change_flags |= RGBLIGHT_STATUS_CHANGE_HSVS + #define RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE rgblight_status.change_flags |= RGBLIGHT_STATUS_CHANGE_TIMER + #define RGBLIGHT_SPLIT_ANIMATION_TICK rgblight_status.change_flags |= RGBLIGHT_STATUS_ANIMATION_TICK +#else + #define RGBLIGHT_SPLIT_SET_CHANGE_MODE + #define RGBLIGHT_SPLIT_SET_CHANGE_HSVS + #define RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE + #define RGBLIGHT_SPLIT_ANIMATION_TICK +#endif + #define _RGBM_SINGLE_STATIC(sym) RGBLIGHT_MODE_ ## sym, #define _RGBM_SINGLE_DYNAMIC(sym) #define _RGBM_MULTI_STATIC(sym) RGBLIGHT_MODE_ ## sym, #define _RGBM_MULTI_DYNAMIC(sym) -#define _RGBM_TMP_STATIC(sym) RGBLIGHT_MODE_ ## sym, -#define _RGBM_TMP_DYNAMIC(sym) +#define _RGBM_TMP_STATIC(sym, msym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_TMP_DYNAMIC(sym, msym) static uint8_t static_effect_table [] = { -#include "rgblight.h" +#include "rgblight_modes.h" +}; + +#define _RGBM_SINGLE_STATIC(sym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_SINGLE_DYNAMIC(sym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_MULTI_STATIC(sym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_MULTI_DYNAMIC(sym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_TMP_STATIC(sym, msym) RGBLIGHT_MODE_ ## msym, +#define _RGBM_TMP_DYNAMIC(sym, msym) RGBLIGHT_MODE_ ## msym, +static uint8_t mode_base_table [] = { + 0, // RGBLIGHT_MODE_zero +#include "rgblight_modes.h" }; static inline int is_static_effect(uint8_t mode) { @@ -61,14 +85,18 @@ const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90}; #endif rgblight_config_t rgblight_config; +rgblight_status_t rgblight_status = { .timer_enabled = false }; bool is_rgblight_initialized = false; +#ifdef RGBLIGHT_USE_TIMER +animation_status_t animation_status = {}; +#endif + #ifndef LED_ARRAY LED_TYPE led[RGBLED_NUM]; #define LED_ARRAY led #endif -bool rgblight_timer_enabled = false; static uint8_t clipping_start_pos = 0; static uint8_t clipping_num_leds = RGBLED_NUM; @@ -221,6 +249,7 @@ void rgblight_init(void) { eeconfig_update_rgblight_default(); } rgblight_config.raw = eeconfig_read_rgblight(); + RGBLIGHT_SPLIT_SET_CHANGE_HSVS; if (!rgblight_config.mode) { dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n"); eeconfig_update_rgblight_default(); @@ -321,6 +350,7 @@ void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) { } else { rgblight_config.mode = mode; } + RGBLIGHT_SPLIT_SET_CHANGE_MODE; if (write_to_eeprom) { eeconfig_update_rgblight(rgblight_config.raw); xprintf("rgblight mode [EEPROM]: %u\n", rgblight_config.mode); @@ -336,6 +366,9 @@ void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) { rgblight_timer_enable(); #endif } +#ifdef RGBLIGHT_USE_TIMER + animation_status.restart = true; +#endif rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, rgblight_config.val); } @@ -389,6 +422,7 @@ void rgblight_disable(void) { #ifdef RGBLIGHT_USE_TIMER rgblight_timer_disable(); #endif + RGBLIGHT_SPLIT_SET_CHANGE_MODE; wait_ms(50); rgblight_set(); } @@ -399,6 +433,7 @@ void rgblight_disable_noeeprom(void) { #ifdef RGBLIGHT_USE_TIMER rgblight_timer_disable(); #endif + RGBLIGHT_SPLIT_SET_CHANGE_MODE; wait_ms(50); rgblight_set(); } @@ -505,11 +540,13 @@ void rgblight_decrease_val(void) { } void rgblight_increase_speed(void) { rgblight_config.speed = increment( rgblight_config.speed, 1, 0, 3 ); + //RGBLIGHT_SPLIT_SET_CHANGE_HSVS; // NEED? eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this } void rgblight_decrease_speed(void) { rgblight_config.speed = decrement( rgblight_config.speed, 1, 0, 3 ); + //RGBLIGHT_SPLIT_SET_CHANGE_HSVS; // NEED?? eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this } @@ -524,6 +561,7 @@ void rgblight_sethsv_noeeprom_old(uint16_t hue, uint8_t sat, uint8_t val) { void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom) { if (rgblight_config.enable) { + rgblight_status.base_mode = mode_base_table[rgblight_config.mode]; if (rgblight_config.mode == RGBLIGHT_MODE_STATIC_LIGHT) { // same static color LED_TYPE tmp_led; @@ -534,33 +572,30 @@ void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool if ( 1 == 0 ) { //dummy } #ifdef RGBLIGHT_EFFECT_BREATHING - else if (rgblight_config.mode >= RGBLIGHT_MODE_BREATHING && - rgblight_config.mode <= RGBLIGHT_MODE_BREATHING_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_BREATHING ) { // breathing mode, ignore the change of val, use in memory value instead val = rgblight_config.val; } #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD - else if (rgblight_config.mode >= RGBLIGHT_MODE_RAINBOW_MOOD && - rgblight_config.mode <= RGBLIGHT_MODE_RAINBOW_MOOD_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_RAINBOW_MOOD) { // rainbow mood, ignore the change of hue hue = rgblight_config.hue; } #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL - else if (rgblight_config.mode >= RGBLIGHT_MODE_RAINBOW_SWIRL && - rgblight_config.mode <= RGBLIGHT_MODE_RAINBOW_SWIRL_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_RAINBOW_SWIRL) { // rainbow swirl, ignore the change of hue hue = rgblight_config.hue; } #endif #ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT - else if (rgblight_config.mode >= RGBLIGHT_MODE_STATIC_GRADIENT && - rgblight_config.mode <= RGBLIGHT_MODE_STATIC_GRADIENT_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_STATIC_GRADIENT) { // static gradient uint16_t _hue; - int8_t direction = ((rgblight_config.mode - RGBLIGHT_MODE_STATIC_GRADIENT) % 2) ? -1 : 1; - uint16_t range = pgm_read_word(&RGBLED_GRADIENT_RANGES[(rgblight_config.mode - RGBLIGHT_MODE_STATIC_GRADIENT) / 2]); + uint8_t delta = rgblight_config.mode - rgblight_status.base_mode; + int8_t direction = (delta % 2) ? -1 : 1; + uint16_t range = pgm_read_word(&RGBLED_GRADIENT_RANGES[delta / 2]); for (uint8_t i = 0; i < RGBLED_NUM; i++) { _hue = (range / RGBLED_NUM * i * direction + hue + 360) % 360; dprintf("rgblight rainbow set hsv: %u,%u,%d,%u\n", i, _hue, direction, range); @@ -570,6 +605,13 @@ void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool } #endif } +#ifdef RGBLIGHT_SPLIT + if( rgblight_config.hue != hue || + rgblight_config.sat != sat || + rgblight_config.val != val ) { + RGBLIGHT_SPLIT_SET_CHANGE_HSVS; + } +#endif rgblight_config.hue = hue; rgblight_config.sat = sat; rgblight_config.val = val; @@ -711,10 +753,59 @@ void rgblight_set(void) { } #endif +#ifdef RGBLIGHT_SPLIT +/* for split keyboard master side */ +uint8_t rgblight_get_change_flags(void) { + return rgblight_status.change_flags; +} + +void rgblight_clear_change_flags(void) { + rgblight_status.change_flags = 0; +} + +void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo) { + syncinfo->config = rgblight_config; + syncinfo->status = rgblight_status; +} + +/* for split keyboard slave side */ +void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom) { + if (syncinfo->status.change_flags & RGBLIGHT_STATUS_CHANGE_MODE) { + if (syncinfo->config.enable) { + rgblight_config.enable = 1; // == rgblight_enable_noeeprom(); + rgblight_mode_eeprom_helper(syncinfo->config.mode, write_to_eeprom); + } else { + rgblight_disable_noeeprom(); + } + } + if (syncinfo->status.change_flags & RGBLIGHT_STATUS_CHANGE_HSVS) { + rgblight_sethsv_eeprom_helper(syncinfo->config.hue, syncinfo->config.sat, syncinfo->config.val, write_to_eeprom); + // rgblight_config.speed = config->speed; // NEED??? + } + #ifdef RGBLIGHT_USE_TIMER + if (syncinfo->status.change_flags & RGBLIGHT_STATUS_CHANGE_TIMER) { + if (syncinfo->status.timer_enabled) { + rgblight_timer_enable(); + } else { + rgblight_timer_disable(); + } + } + #ifndef RGBLIGHT_SPLIT_NO_ANIMATION_SYNC + if (syncinfo->status.change_flags & RGBLIGHT_STATUS_ANIMATION_TICK) { + animation_status.restart = true; + } + #endif /* RGBLIGHT_SPLIT_NO_ANIMATION_SYNC */ + #endif /* RGBLIGHT_USE_TIMER */ +} +#endif /* RGBLIGHT_SPLIT */ + #ifdef RGBLIGHT_USE_TIMER -// Animation timer -- AVR Timer3 +typedef void (*effect_func_t)(animation_status_t *anim); + +// Animation timer -- use system timer (AVR Timer0) void rgblight_timer_init(void) { + // OLD!!!! Animation timer -- AVR Timer3 // static uint8_t rgblight_timer_is_init = 0; // if (rgblight_timer_is_init) { // return; @@ -730,19 +821,29 @@ void rgblight_timer_init(void) { // OCR3AL = RGBLED_TIMER_TOP & 0xff; // SREG = sreg; - rgblight_timer_enabled = true; + rgblight_status.timer_enabled = false; + RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE; } void rgblight_timer_enable(void) { - rgblight_timer_enabled = true; - dprintf("TIMER3 enabled.\n"); + if( !is_static_effect(rgblight_config.mode) ) { + rgblight_status.timer_enabled = true; + } + animation_status.last_timer = timer_read(); + RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE; + dprintf("rgblight timer enabled.\n"); } void rgblight_timer_disable(void) { - rgblight_timer_enabled = false; - dprintf("TIMER3 disabled.\n"); + rgblight_status.timer_enabled = false; + RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE; + dprintf("rgblight timer disable.\n"); } void rgblight_timer_toggle(void) { - rgblight_timer_enabled ^= rgblight_timer_enabled; - dprintf("TIMER3 toggled.\n"); + dprintf("rgblight timer toggle.\n"); + if(rgblight_status.timer_enabled) { + rgblight_timer_disable(); + } else { + rgblight_timer_enable(); + } } void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b) { @@ -751,64 +852,116 @@ void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b) { rgblight_setrgb(r, g, b); } +static void rgblight_effect_dummy(animation_status_t *anim) { + // do nothing + /******** + dprintf("rgblight_task() what happened?\n"); + dprintf("is_static_effect %d\n", is_static_effect(rgblight_config.mode)); + dprintf("mode = %d, base_mode = %d, timer_enabled %d, ", + rgblight_config.mode, rgblight_status.base_mode, + rgblight_status.timer_enabled); + dprintf("last_timer = %d\n",anim->last_timer); + **/ +} + void rgblight_task(void) { + if (rgblight_status.timer_enabled) { + effect_func_t effect_func = rgblight_effect_dummy; + uint16_t interval_time = 2000; // dummy interval + uint8_t delta = rgblight_config.mode - rgblight_status.base_mode; + animation_status.delta = delta; - if (rgblight_timer_enabled) { // static light mode, do nothing here if ( 1 == 0 ) { //dummy } #ifdef RGBLIGHT_EFFECT_BREATHING - else if (rgblight_config.mode >= RGBLIGHT_MODE_BREATHING && - rgblight_config.mode <= RGBLIGHT_MODE_BREATHING_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_BREATHING) { // breathing mode - rgblight_effect_breathing(rgblight_config.mode - RGBLIGHT_MODE_BREATHING ); + interval_time = get_interval_time(&RGBLED_BREATHING_INTERVALS[delta], 1, 100); + effect_func = rgblight_effect_breathing; } #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD - else if (rgblight_config.mode >= RGBLIGHT_MODE_RAINBOW_MOOD && - rgblight_config.mode <= RGBLIGHT_MODE_RAINBOW_MOOD_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_RAINBOW_MOOD) { // rainbow mood mode - rgblight_effect_rainbow_mood(rgblight_config.mode - RGBLIGHT_MODE_RAINBOW_MOOD); + interval_time = get_interval_time(&RGBLED_RAINBOW_MOOD_INTERVALS[delta], 5, 100); + effect_func = rgblight_effect_rainbow_mood; } #endif #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL - else if (rgblight_config.mode >= RGBLIGHT_MODE_RAINBOW_SWIRL && - rgblight_config.mode <= RGBLIGHT_MODE_RAINBOW_SWIRL_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_RAINBOW_SWIRL) { // rainbow swirl mode - rgblight_effect_rainbow_swirl(rgblight_config.mode - RGBLIGHT_MODE_RAINBOW_SWIRL); + interval_time = get_interval_time(&RGBLED_RAINBOW_SWIRL_INTERVALS[delta / 2], 1, 100); + effect_func = rgblight_effect_rainbow_swirl; } #endif #ifdef RGBLIGHT_EFFECT_SNAKE - else if (rgblight_config.mode >= RGBLIGHT_MODE_SNAKE && - rgblight_config.mode <= RGBLIGHT_MODE_SNAKE_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_SNAKE) { // snake mode - rgblight_effect_snake(rgblight_config.mode - RGBLIGHT_MODE_SNAKE); + interval_time = get_interval_time(&RGBLED_SNAKE_INTERVALS[delta / 2], 1, 200); + effect_func = rgblight_effect_snake; } #endif #ifdef RGBLIGHT_EFFECT_KNIGHT - else if (rgblight_config.mode >= RGBLIGHT_MODE_KNIGHT && - rgblight_config.mode <= RGBLIGHT_MODE_KNIGHT_end) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_KNIGHT) { // knight mode - rgblight_effect_knight(rgblight_config.mode - RGBLIGHT_MODE_KNIGHT); + interval_time = get_interval_time(&RGBLED_KNIGHT_INTERVALS[delta], 5, 100); + effect_func = rgblight_effect_knight; } #endif #ifdef RGBLIGHT_EFFECT_CHRISTMAS - else if (rgblight_config.mode == RGBLIGHT_MODE_CHRISTMAS) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_CHRISTMAS) { // christmas mode - rgblight_effect_christmas(); + interval_time = RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL; + effect_func = (effect_func_t)rgblight_effect_christmas; } #endif #ifdef RGBLIGHT_EFFECT_RGB_TEST - else if (rgblight_config.mode == RGBLIGHT_MODE_RGB_TEST) { + else if (rgblight_status.base_mode == RGBLIGHT_MODE_RGB_TEST) { // RGB test mode - rgblight_effect_rgbtest(); + interval_time = pgm_read_word(&RGBLED_RGBTEST_INTERVALS[0]); + effect_func = (effect_func_t)rgblight_effect_rgbtest; } #endif #ifdef RGBLIGHT_EFFECT_ALTERNATING - else if (rgblight_config.mode == RGBLIGHT_MODE_ALTERNATING){ - rgblight_effect_alternating(); + else if (rgblight_status.base_mode == RGBLIGHT_MODE_ALTERNATING){ + interval_time = 500; + effect_func = (effect_func_t)rgblight_effect_alternating; + } +#endif + if (animation_status.restart) { + animation_status.restart = false; + animation_status.last_timer = timer_read() - interval_time - 1; + animation_status.pos16 = 0; // restart signal to local each effect } + if (timer_elapsed(animation_status.last_timer) >= interval_time) { +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + static uint16_t report_last_timer = 0; + static bool tick_flag = false; + uint16_t oldpos16; + if (tick_flag) { + tick_flag = false; + //dprintf("rgblight animation tick\n"); + if (timer_elapsed(report_last_timer) >= 30000) { + report_last_timer = timer_read(); + dprintf("rgblight animation tick report to slave\n"); + RGBLIGHT_SPLIT_ANIMATION_TICK; + } + } + oldpos16 = animation_status.pos16; + //dprintf("call effect function\n"); +#endif + animation_status.last_timer += interval_time; + effect_func(&animation_status); +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + //dprintf("pos16, oldpos16 = %d %d\n", + // animation_status.pos16,oldpos16); + if (animation_status.pos16 == 0 && oldpos16 != 0) { + //dprintf("flag on\n"); + tick_flag = true; + } #endif + } } } @@ -819,22 +972,13 @@ void rgblight_task(void) { __attribute__ ((weak)) const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5}; -void rgblight_effect_breathing(uint8_t interval) { - static uint8_t pos = 0; - static uint16_t last_timer = 0; +void rgblight_effect_breathing(animation_status_t *anim) { float val; - uint8_t interval_time = get_interval_time(&RGBLED_BREATHING_INTERVALS[interval], 1, 100); - - if (timer_elapsed(last_timer) < interval_time) { - return; - } - last_timer = timer_read(); - // http://sean.voisen.org/blog/2011/10/breathing-led-with-arduino/ - val = (exp(sin((pos/255.0)*M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER/M_E)*(RGBLIGHT_EFFECT_BREATHE_MAX/(M_E-1/M_E)); + val = (exp(sin((anim->pos/255.0)*M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER/M_E)*(RGBLIGHT_EFFECT_BREATHE_MAX/(M_E-1/M_E)); rgblight_sethsv_noeeprom_old(rgblight_config.hue, rgblight_config.sat, val); - pos = (pos + 1) % 256; + anim->pos = (anim->pos + 1) % 256; } #endif @@ -842,18 +986,9 @@ void rgblight_effect_breathing(uint8_t interval) { __attribute__ ((weak)) const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30}; -void rgblight_effect_rainbow_mood(uint8_t interval) { - static uint16_t current_hue = 0; - static uint16_t last_timer = 0; - - uint8_t interval_time = get_interval_time(&RGBLED_RAINBOW_MOOD_INTERVALS[interval], 5, 100); - - if (timer_elapsed(last_timer) < interval_time) { - return; - } - last_timer = timer_read(); - rgblight_sethsv_noeeprom_old(current_hue, rgblight_config.sat, rgblight_config.val); - current_hue = (current_hue + 1) % 360; +void rgblight_effect_rainbow_mood(animation_status_t *anim) { + rgblight_sethsv_noeeprom_old(anim->current_hue, rgblight_config.sat, rgblight_config.val); + anim->current_hue = (anim->current_hue + 1) % 360; } #endif @@ -865,31 +1000,23 @@ void rgblight_effect_rainbow_mood(uint8_t interval) { __attribute__ ((weak)) const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20}; -void rgblight_effect_rainbow_swirl(uint8_t interval) { - static uint16_t current_hue = 0; - static uint16_t last_timer = 0; +void rgblight_effect_rainbow_swirl(animation_status_t *anim) { uint16_t hue; uint8_t i; - uint8_t interval_time = get_interval_time(&RGBLED_RAINBOW_SWIRL_INTERVALS[interval / 2], 1, 100); - - if (timer_elapsed(last_timer) < interval_time) { - return; - } - last_timer = timer_read(); for (i = 0; i < RGBLED_NUM; i++) { - hue = (RGBLIGHT_RAINBOW_SWIRL_RANGE / RGBLED_NUM * i + current_hue) % 360; + hue = (RGBLIGHT_RAINBOW_SWIRL_RANGE / RGBLED_NUM * i + anim->current_hue) % 360; sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); } rgblight_set(); - if (interval % 2) { - current_hue = (current_hue + 1) % 360; + if (anim->delta % 2) { + anim->current_hue = (anim->current_hue + 1) % 360; } else { - if (current_hue - 1 < 0) { - current_hue = 359; + if (anim->current_hue - 1 < 0) { + anim->current_hue = 359; } else { - current_hue = current_hue - 1; + anim->current_hue = anim->current_hue - 1; } } } @@ -899,22 +1026,27 @@ void rgblight_effect_rainbow_swirl(uint8_t interval) { __attribute__ ((weak)) const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20}; -void rgblight_effect_snake(uint8_t interval) { +void rgblight_effect_snake(animation_status_t *anim) { static uint8_t pos = 0; - static uint16_t last_timer = 0; uint8_t i, j; int8_t k; int8_t increment = 1; - if (interval % 2) { + + if (anim->delta % 2) { increment = -1; } - uint8_t interval_time = get_interval_time(&RGBLED_SNAKE_INTERVALS[interval / 2], 1, 200); - - if (timer_elapsed(last_timer) < interval_time) { - return; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + if (anim->pos == 0) { // restart signal + if (increment == 1) { + pos = RGBLED_NUM - 1; + } else { + pos = 0; + } + anim->pos = 1; } - last_timer = timer_read(); +#endif + for (i = 0; i < RGBLED_NUM; i++) { led[i].r = 0; led[i].g = 0; @@ -925,7 +1057,9 @@ void rgblight_effect_snake(uint8_t interval) { k = k + RGBLED_NUM; } if (i == k) { - sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), (LED_TYPE *)&led[i]); + sethsv(rgblight_config.hue, rgblight_config.sat, + (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), + (LED_TYPE *)&led[i]); } } } @@ -933,11 +1067,20 @@ void rgblight_effect_snake(uint8_t interval) { if (increment == 1) { if (pos - 1 < 0) { pos = RGBLED_NUM - 1; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + anim->pos = 0; +#endif } else { pos -= 1; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + anim->pos = 1; +#endif } } else { pos = (pos + 1) % RGBLED_NUM; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + anim->pos = pos; +#endif } } #endif @@ -946,21 +1089,21 @@ void rgblight_effect_snake(uint8_t interval) { __attribute__ ((weak)) const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31}; -void rgblight_effect_knight(uint8_t interval) { - static uint16_t last_timer = 0; - - uint8_t interval_time = get_interval_time(&RGBLED_KNIGHT_INTERVALS[interval], 5, 100); - - if (timer_elapsed(last_timer) < interval_time) { - return; - } - last_timer = timer_read(); +void rgblight_effect_knight(animation_status_t *anim) { static int8_t low_bound = 0; static int8_t high_bound = RGBLIGHT_EFFECT_KNIGHT_LENGTH - 1; static int8_t increment = 1; uint8_t i, cur; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + if (anim->pos == 0) { // restart signal + anim->pos = 1; + low_bound = 0; + high_bound = RGBLIGHT_EFFECT_KNIGHT_LENGTH - 1; + increment = 1; + } +#endif // Set all the LEDs to 0 for (i = 0; i < RGBLED_NUM; i++) { led[i].r = 0; @@ -988,23 +1131,23 @@ void rgblight_effect_knight(uint8_t interval) { if (high_bound <= 0 || low_bound >= RGBLIGHT_EFFECT_KNIGHT_LED_NUM - 1) { increment = -increment; +#if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC) + if (increment == 1) { + anim->pos = 0; + } +#endif } } #endif #ifdef RGBLIGHT_EFFECT_CHRISTMAS -void rgblight_effect_christmas(void) { - static uint16_t current_offset = 0; - static uint16_t last_timer = 0; +void rgblight_effect_christmas(animation_status_t *anim) { uint16_t hue; uint8_t i; - if (timer_elapsed(last_timer) < RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL) { - return; - } - last_timer = timer_read(); - current_offset = (current_offset + 1) % 2; + + anim->current_offset = (anim->current_offset + 1) % 2; for (i = 0; i < RGBLED_NUM; i++) { - hue = 0 + ((i/RGBLIGHT_EFFECT_CHRISTMAS_STEP + current_offset) % 2) * 120; + hue = 0 + ((i/RGBLIGHT_EFFECT_CHRISTMAS_STEP + anim->current_offset) % 2) * 120; sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); } rgblight_set(); @@ -1015,52 +1158,39 @@ void rgblight_effect_christmas(void) { __attribute__ ((weak)) const uint16_t RGBLED_RGBTEST_INTERVALS[] PROGMEM = {1024}; -void rgblight_effect_rgbtest(void) { - static uint8_t pos = 0; - static uint16_t last_timer = 0; +void rgblight_effect_rgbtest(animation_status_t *anim) { static uint8_t maxval = 0; uint8_t g; uint8_t r; uint8_t b; - if (timer_elapsed(last_timer) < pgm_read_word(&RGBLED_RGBTEST_INTERVALS[0])) { - return; - } - if( maxval == 0 ) { LED_TYPE tmp_led; sethsv(0, 255, RGBLIGHT_LIMIT_VAL, &tmp_led); maxval = tmp_led.r; } - last_timer = timer_read(); g = r = b = 0; - switch( pos ) { + switch( anim->pos ) { case 0: r = maxval; break; case 1: g = maxval; break; case 2: b = maxval; break; } rgblight_setrgb(r, g, b); - pos = (pos + 1) % 3; + anim->pos = (anim->pos + 1) % 3; } #endif #ifdef RGBLIGHT_EFFECT_ALTERNATING -void rgblight_effect_alternating(void){ - static uint16_t last_timer = 0; - static uint16_t pos = 0; - if (timer_elapsed(last_timer) < 500) { - return; - } - last_timer = timer_read(); +void rgblight_effect_alternating(animation_status_t *anim) { for(int i = 0; ipos){ sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); - }else if (i>=RGBLED_NUM/2 && !pos){ + }else if (i>=RGBLED_NUM/2 && !anim->pos){ sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); }else{ sethsv(rgblight_config.hue, rgblight_config.sat, 0, (LED_TYPE *)&led[i]); } } rgblight_set(); - pos = (pos + 1) % 2; + anim->pos = (anim->pos + 1) % 2; } #endif diff --git a/quantum/rgblight.h b/quantum/rgblight.h index 1769f719d9..748d009dcf 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -68,11 +68,11 @@ #define _RGBM_SINGLE_DYNAMIC(sym) RGBLIGHT_MODE_ ## sym, #define _RGBM_MULTI_STATIC(sym) RGBLIGHT_MODE_ ## sym, #define _RGBM_MULTI_DYNAMIC(sym) RGBLIGHT_MODE_ ## sym, -#define _RGBM_TMP_STATIC(sym) RGBLIGHT_MODE_ ## sym, -#define _RGBM_TMP_DYNAMIC(sym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_TMP_STATIC(sym, msym) RGBLIGHT_MODE_ ## sym, +#define _RGBM_TMP_DYNAMIC(sym, msym) RGBLIGHT_MODE_ ## sym, enum RGBLIGHT_EFFECT_MODE { RGBLIGHT_MODE_zero = 0, -#include "rgblight.h" +#include "rgblight_modes.h" RGBLIGHT_MODE_last }; @@ -163,6 +163,33 @@ typedef union { }; } rgblight_config_t; +typedef struct _rgblight_status_t { + uint8_t base_mode; + bool timer_enabled; +#ifdef RGBLIGHT_SPLIT + uint8_t change_flags; +#endif +} rgblight_status_t; + +#ifdef RGBLIGHT_SPLIT + #define RGBLIGHT_STATUS_CHANGE_MODE (1<<0) + #define RGBLIGHT_STATUS_CHANGE_HSVS (1<<1) + #define RGBLIGHT_STATUS_CHANGE_TIMER (1<<2) + #define RGBLIGHT_STATUS_ANIMATION_TICK (1<<3) + + typedef struct _rgblight_syncinfo_t { + rgblight_config_t config; + rgblight_status_t status; + } rgblight_syncinfo_t; + + /* for split keyboard master side */ + uint8_t rgblight_get_change_flags(void); + void rgblight_clear_change_flags(void); + void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo); + /* for split keyboard slave side */ + void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom); +#endif + void rgblight_init(void); void rgblight_increase(void); void rgblight_decrease(void); @@ -237,82 +264,33 @@ void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); void rgblight_timer_toggle(void); -void rgblight_effect_breathing(uint8_t interval); -void rgblight_effect_rainbow_mood(uint8_t interval); -void rgblight_effect_rainbow_swirl(uint8_t interval); -void rgblight_effect_snake(uint8_t interval); -void rgblight_effect_knight(uint8_t interval); -void rgblight_effect_christmas(void); -void rgblight_effect_rgbtest(void); -void rgblight_effect_alternating(void); -#endif // #ifndef RGBLIGHT_H_DUMMY_DEFINE -#endif // RGBLIGHT_H +#ifdef RGBLIGHT_USE_TIMER + +typedef struct _animation_status_t { + uint16_t last_timer; + uint8_t delta; /* mode - base_mode */ + bool restart; + union { + uint16_t pos16; + uint8_t pos; + int16_t current_hue; + uint16_t current_offset; + }; +} animation_status_t; + +extern animation_status_t animation_status; + +void rgblight_effect_breathing(animation_status_t *anim); +void rgblight_effect_rainbow_mood(animation_status_t *anim); +void rgblight_effect_rainbow_swirl(animation_status_t *anim); +void rgblight_effect_snake(animation_status_t *anim); +void rgblight_effect_knight(animation_status_t *anim); +void rgblight_effect_christmas(animation_status_t *anim); +void rgblight_effect_rgbtest(animation_status_t *anim); +void rgblight_effect_alternating(animation_status_t *anim); -#ifdef _RGBM_SINGLE_STATIC - _RGBM_SINGLE_STATIC( STATIC_LIGHT ) - #ifdef RGBLIGHT_EFFECT_BREATHING - _RGBM_MULTI_DYNAMIC( BREATHING ) - _RGBM_TMP_DYNAMIC( breathing_3 ) - _RGBM_TMP_DYNAMIC( breathing_4 ) - _RGBM_TMP_DYNAMIC( BREATHING_end ) - #endif - #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD - _RGBM_MULTI_DYNAMIC( RAINBOW_MOOD ) - _RGBM_TMP_DYNAMIC( rainbow_mood_7 ) - _RGBM_TMP_DYNAMIC( RAINBOW_MOOD_end ) - #endif - #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL - _RGBM_MULTI_DYNAMIC( RAINBOW_SWIRL ) - _RGBM_TMP_DYNAMIC( rainbow_swirl_10 ) - _RGBM_TMP_DYNAMIC( rainbow_swirl_11 ) - _RGBM_TMP_DYNAMIC( rainbow_swirl_12 ) - _RGBM_TMP_DYNAMIC( rainbow_swirl_13 ) - _RGBM_TMP_DYNAMIC( RAINBOW_SWIRL_end ) - #endif - #ifdef RGBLIGHT_EFFECT_SNAKE - _RGBM_MULTI_DYNAMIC( SNAKE ) - _RGBM_TMP_DYNAMIC( snake_16 ) - _RGBM_TMP_DYNAMIC( snake_17 ) - _RGBM_TMP_DYNAMIC( snake_18 ) - _RGBM_TMP_DYNAMIC( snake_19 ) - _RGBM_TMP_DYNAMIC( SNAKE_end ) - #endif - #ifdef RGBLIGHT_EFFECT_KNIGHT - _RGBM_MULTI_DYNAMIC( KNIGHT ) - _RGBM_TMP_DYNAMIC( knight_22 ) - _RGBM_TMP_DYNAMIC( KNIGHT_end ) - #endif - #ifdef RGBLIGHT_EFFECT_CHRISTMAS - _RGBM_SINGLE_DYNAMIC( CHRISTMAS ) - #endif - #ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT - _RGBM_MULTI_STATIC( STATIC_GRADIENT ) - _RGBM_TMP_STATIC( static_gradient_26 ) - _RGBM_TMP_STATIC( static_gradient_27 ) - _RGBM_TMP_STATIC( static_gradient_28 ) - _RGBM_TMP_STATIC( static_gradient_29 ) - _RGBM_TMP_STATIC( static_gradient_30 ) - _RGBM_TMP_STATIC( static_gradient_31 ) - _RGBM_TMP_STATIC( static_gradient_32 ) - _RGBM_TMP_STATIC( static_gradient_33 ) - _RGBM_TMP_STATIC( STATIC_GRADIENT_end ) - #endif - #ifdef RGBLIGHT_EFFECT_RGB_TEST - _RGBM_SINGLE_DYNAMIC( RGB_TEST ) - #endif - #ifdef RGBLIGHT_EFFECT_ALTERNATING - _RGBM_SINGLE_DYNAMIC( ALTERNATING ) - #endif - //// Add a new mode here. - // #ifdef RGBLIGHT_EFFECT_ - // _RGBM__( ) - // #endif #endif -#undef _RGBM_SINGLE_STATIC -#undef _RGBM_SINGLE_DYNAMIC -#undef _RGBM_MULTI_STATIC -#undef _RGBM_MULTI_DYNAMIC -#undef _RGBM_TMP_STATIC -#undef _RGBM_TMP_DYNAMIC +#endif // #ifndef RGBLIGHT_H_DUMMY_DEFINE +#endif // RGBLIGHT_H diff --git a/quantum/rgblight_modes.h b/quantum/rgblight_modes.h new file mode 100644 index 0000000000..8a8f9bdda9 --- /dev/null +++ b/quantum/rgblight_modes.h @@ -0,0 +1,67 @@ +#ifdef _RGBM_SINGLE_STATIC + _RGBM_SINGLE_STATIC( STATIC_LIGHT ) + #ifdef RGBLIGHT_EFFECT_BREATHING + _RGBM_MULTI_DYNAMIC( BREATHING ) + _RGBM_TMP_DYNAMIC( breathing_3, BREATHING ) + _RGBM_TMP_DYNAMIC( breathing_4, BREATHING ) + _RGBM_TMP_DYNAMIC( BREATHING_end, BREATHING ) + #endif + #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD + _RGBM_MULTI_DYNAMIC( RAINBOW_MOOD ) + _RGBM_TMP_DYNAMIC( rainbow_mood_7, RAINBOW_MOOD ) + _RGBM_TMP_DYNAMIC( RAINBOW_MOOD_end, RAINBOW_MOOD ) + #endif + #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL + _RGBM_MULTI_DYNAMIC( RAINBOW_SWIRL ) + _RGBM_TMP_DYNAMIC( rainbow_swirl_10, RAINBOW_SWIRL ) + _RGBM_TMP_DYNAMIC( rainbow_swirl_11, RAINBOW_SWIRL ) + _RGBM_TMP_DYNAMIC( rainbow_swirl_12, RAINBOW_SWIRL ) + _RGBM_TMP_DYNAMIC( rainbow_swirl_13, RAINBOW_SWIRL ) + _RGBM_TMP_DYNAMIC( RAINBOW_SWIRL_end, RAINBOW_SWIRL ) + #endif + #ifdef RGBLIGHT_EFFECT_SNAKE + _RGBM_MULTI_DYNAMIC( SNAKE ) + _RGBM_TMP_DYNAMIC( snake_16, SNAKE ) + _RGBM_TMP_DYNAMIC( snake_17, SNAKE ) + _RGBM_TMP_DYNAMIC( snake_18, SNAKE ) + _RGBM_TMP_DYNAMIC( snake_19, SNAKE ) + _RGBM_TMP_DYNAMIC( SNAKE_end, SNAKE ) + #endif + #ifdef RGBLIGHT_EFFECT_KNIGHT + _RGBM_MULTI_DYNAMIC( KNIGHT ) + _RGBM_TMP_DYNAMIC( knight_22, KNIGHT ) + _RGBM_TMP_DYNAMIC( KNIGHT_end, KNIGHT ) + #endif + #ifdef RGBLIGHT_EFFECT_CHRISTMAS + _RGBM_SINGLE_DYNAMIC( CHRISTMAS ) + #endif + #ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT + _RGBM_MULTI_STATIC( STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_26, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_27, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_28, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_29, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_30, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_31, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_32, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( static_gradient_33, STATIC_GRADIENT ) + _RGBM_TMP_STATIC( STATIC_GRADIENT_end, STATIC_GRADIENT ) + #endif + #ifdef RGBLIGHT_EFFECT_RGB_TEST + _RGBM_SINGLE_DYNAMIC( RGB_TEST ) + #endif + #ifdef RGBLIGHT_EFFECT_ALTERNATING + _RGBM_SINGLE_DYNAMIC( ALTERNATING ) + #endif + //// Add a new mode here. + // #ifdef RGBLIGHT_EFFECT_ + // _RGBM__( ) + // #endif +#endif + +#undef _RGBM_SINGLE_STATIC +#undef _RGBM_SINGLE_DYNAMIC +#undef _RGBM_MULTI_STATIC +#undef _RGBM_MULTI_DYNAMIC +#undef _RGBM_TMP_STATIC +#undef _RGBM_TMP_DYNAMIC From cedda573beca0db7466d651a6b5663b95555f3a2 Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Sat, 20 Apr 2019 07:25:08 +0900 Subject: [PATCH 2/5] Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336) --- build_keyboard.mk | 18 +++ common_features.mk | 2 + quantum/rgblight_post_config.h | 5 + quantum/split_common/post_config.h | 15 +++ quantum/split_common/transport.c | 184 +++++++++++++++++------------ 5 files changed, 150 insertions(+), 74 deletions(-) create mode 100644 quantum/rgblight_post_config.h create mode 100644 quantum/split_common/post_config.h diff --git a/build_keyboard.mk b/build_keyboard.mk index ee6a69fc79..5d633f2716 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -280,6 +280,23 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/config.h)","") CONFIG_H += $(KEYBOARD_PATH_1)/config.h endif +POST_CONFIG_H := +ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_config.h)","") + POST_CONFIG_H += $(KEYBOARD_PATH_1)/post_config.h +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_config.h)","") + POST_CONFIG_H += $(KEYBOARD_PATH_2)/post_config.h +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_config.h)","") + POST_CONFIG_H += $(KEYBOARD_PATH_3)/post_config.h +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_config.h)","") + POST_CONFIG_H += $(KEYBOARD_PATH_4)/post_config.h +endif +ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","") + POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h +endif + # Save the defines and includes here, so we don't include any keymap specific ones PROJECT_DEFS := $(OPT_DEFS) PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS) @@ -355,6 +372,7 @@ ifeq ($(strip $(VISUALIZER_ENABLE)), yes) include $(VISUALIZER_PATH)/visualizer.mk endif +CONFIG_H += $(POST_CONFIG_H) ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H) OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT) diff --git a/common_features.mk b/common_features.mk index bd1685869d..eb623d18fa 100644 --- a/common_features.mk +++ b/common_features.mk @@ -103,6 +103,7 @@ ifeq ($(strip $(UNICODE_COMMON)), yes) endif ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) + POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h OPT_DEFS += -DRGBLIGHT_ENABLE SRC += $(QUANTUM_DIR)/rgblight.c CIE1931_CURVE = yes @@ -318,6 +319,7 @@ ifneq ($(strip $(DEBOUNCE_TYPE)), custom) endif ifeq ($(strip $(SPLIT_KEYBOARD)), yes) + POST_CONFIG_H += $(QUANTUM_DIR)/split_common/post_config.h OPT_DEFS += -DSPLIT_KEYBOARD # Include files used by all split keyboards diff --git a/quantum/rgblight_post_config.h b/quantum/rgblight_post_config.h new file mode 100644 index 0000000000..048746c4b7 --- /dev/null +++ b/quantum/rgblight_post_config.h @@ -0,0 +1,5 @@ +#if defined(RGBLED_SPLIT) && !defined(RGBLIGHT_SPLIT) + // When RGBLED_SPLIT is defined, + // it is considered that RGBLIGHT_SPLIT is defined implicitly. + #define RGBLIGHT_SPLIT +#endif diff --git a/quantum/split_common/post_config.h b/quantum/split_common/post_config.h new file mode 100644 index 0000000000..0e59df3d06 --- /dev/null +++ b/quantum/split_common/post_config.h @@ -0,0 +1,15 @@ +#if defined(USE_I2C) || defined(EH) + // When using I2C, using rgblight implicitly involves split support. + #if defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_SPLIT) + #define RGBLIGHT_SPLIT + #endif + +#else // use serial + // When using serial, the user must define RGBLIGHT_SPLIT explicitly + // in config.h as needed. + // see quantum/rgblight_post_config.h + #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + // When using serial and RGBLIGHT_SPLIT need separate transaction + #define SERIAL_USE_MULTI_TRANSACTION + #endif +#endif diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c index ab055ee656..7ea1a9cec9 100644 --- a/quantum/split_common/transport.c +++ b/quantum/split_common/transport.c @@ -25,36 +25,23 @@ extern backlight_config_t backlight_config; # include "i2c_master.h" # include "i2c_slave.h" -typedef struct __attribute__ ((__packed__)) { -#ifdef BACKLIGHT_ENABLE - uint8_t backlight_level; -#endif -#ifdef RGBLIGHT_ENABLE - uint32_t rgb_settings; +typedef struct _I2C_slave_buffer_t { + matrix_row_t smatrix[ROWS_PER_HAND]; + uint8_t backlight_level; +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + rgblight_syncinfo_t rgblight_sync; #endif #ifdef ENCODER_ENABLE - uint8_t encoder_state[NUMBER_OF_ENCODERS]; -#endif - // Keep matrix last, we are only using this for it's offset - uint8_t matrix_start[0]; -} transport_values_t; - -__attribute__ ((unused)) -static transport_values_t transport_values; - -#ifdef BACKLIGHT_ENABLE -# define I2C_BACKLIT_START (uint8_t)offsetof(transport_values_t, backlight_level) -#endif - -#ifdef RGBLIGHT_ENABLE -# define I2C_RGB_START (uint8_t)offsetof(transport_values_t, rgb_settings) + uint8_t encoder_state[NUMBER_OF_ENCODERS]; #endif +} I2C_slave_buffer_t; -#ifdef ENCODER_ENABLE -# define I2C_ENCODER_START (uint8_t)offsetof(transport_values_t, encoder_state) -#endif +static I2C_slave_buffer_t * const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_reg; -#define I2C_KEYMAP_START (uint8_t)offsetof(transport_values_t, matrix_start) +# define I2C_BACKLIGHT_START offsetof(I2C_slave_buffer_t, backlight_level) +# define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync) +# define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix) +# define I2C_ENCODER_START offsetof(I2C_slave_buffer_t, encoder_state) # define TIMEOUT 100 @@ -64,30 +51,32 @@ static transport_values_t transport_values; // Get rows from other half over i2c bool transport_master(matrix_row_t matrix[]) { - i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_START, (void *)matrix, ROWS_PER_HAND * sizeof(matrix_row_t), TIMEOUT); + i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_START, (void *)matrix, sizeof(i2c_buffer->smatrix), TIMEOUT); // write backlight info # ifdef BACKLIGHT_ENABLE uint8_t level = get_backlight_level(); - if (level != transport_values.backlight_level) { - if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) { - transport_values.backlight_level = level; + if (level != i2c_buffer->backlight_level) { + if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIGHT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) { + i2c_buffer->backlight_level = level; } } # endif -# ifdef RGBLIGHT_ENABLE - uint32_t rgb = rgblight_read_dword(); - if (rgb != transport_values.rgb_settings) { - if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_START, (void *)&rgb, sizeof(rgb), TIMEOUT) >= 0) { - transport_values.rgb_settings = rgb; +# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + if (rgblight_get_change_flags()) { + rgblight_syncinfo_t rgblight_sync; + rgblight_get_syncinfo(&rgblight_sync); + if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_START, + (void *)&rgblight_sync, sizeof(rgblight_sync), TIMEOUT) >= 0) { + rgblight_clear_change_flags(); } } # endif # ifdef ENCODER_ENABLE - i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)transport_values.encoder_state, sizeof(transport_values.encoder_state), TIMEOUT); - encoder_update_raw(&transport_values.encoder_state[0]); + i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)i2c_buffer->encoder_state, sizeof(I2C_slave_buffer_t.encoder_state), TIMEOUT); + encoder_update_raw(i2c_buffer->encoder_state); # endif return true; @@ -95,21 +84,23 @@ bool transport_master(matrix_row_t matrix[]) { void transport_slave(matrix_row_t matrix[]) { // Copy matrix to I2C buffer - memcpy((void*)(i2c_slave_reg + I2C_KEYMAP_START), (void *)matrix, ROWS_PER_HAND * sizeof(matrix_row_t) ); + memcpy((void*)i2c_buffer->smatrix, (void *)matrix, sizeof(i2c_buffer->smatrix)); // Read Backlight Info # ifdef BACKLIGHT_ENABLE - backlight_set(i2c_slave_reg[I2C_BACKLIT_START]); + backlight_set(i2c_buffer->backlight_level); # endif -# ifdef RGBLIGHT_ENABLE - uint32_t rgb = *(uint32_t *)(i2c_slave_reg + I2C_RGB_START); +# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) // Update the RGB with the new data - rgblight_update_dword(rgb); + if (i2c_buffer->rgblight_sync.status.change_flags != 0) { + rgblight_update_sync(&i2c_buffer->rgblight_sync, false); + i2c_buffer->rgblight_sync.status.change_flags = 0; + } # endif # ifdef ENCODER_ENABLE - encoder_state_raw((uint8_t*)(i2c_slave_reg + I2C_ENCODER_START)); + encoder_state_raw(i2c_buffer->encoder_state); # endif } @@ -121,53 +112,109 @@ void transport_slave_init(void) { i2c_slave_init(SLAVE_I2C_ADDRESS); } # include "serial.h" -typedef struct __attribute__ ((__packed__)) { +typedef struct _Serial_s2m_buffer_t { + // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack + matrix_row_t smatrix[ROWS_PER_HAND]; + # ifdef ENCODER_ENABLE uint8_t encoder_state[NUMBER_OF_ENCODERS]; # endif - // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack - matrix_row_t smatrix[ROWS_PER_HAND]; + } Serial_s2m_buffer_t; -typedef struct __attribute__ ((__packed__)) { +typedef struct _Serial_m2s_buffer_t { # ifdef BACKLIGHT_ENABLE uint8_t backlight_level; # endif -# if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) - rgblight_config_t rgblight_config; // not yet use - // - // When MCUs on both sides drive their respective RGB LED chains, - // it is necessary to synchronize, so it is necessary to communicate RGB - // information. In that case, define RGBLED_SPLIT with info on the number - // of LEDs on each half. - // - // Otherwise, if the master side MCU drives both sides RGB LED chains, - // there is no need to communicate. -# endif } Serial_m2s_buffer_t; +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) +// When MCUs on both sides drive their respective RGB LED chains, +// it is necessary to synchronize, so it is necessary to communicate RGB +// information. In that case, define RGBLIGHT_SPLIT with info on the number +// of LEDs on each half. +// +// Otherwise, if the master side MCU drives both sides RGB LED chains, +// there is no need to communicate. + +typedef struct _Serial_rgblight_t { + rgblight_syncinfo_t rgblight_sync; +} Serial_rgblight_t; + +volatile Serial_rgblight_t serial_rgblight = {}; +uint8_t volatile status_rgblight = 0; +#endif + volatile Serial_s2m_buffer_t serial_s2m_buffer = {}; volatile Serial_m2s_buffer_t serial_m2s_buffer = {}; uint8_t volatile status0 = 0; +enum serial_transaction_id { + GET_SLAVE_MATRIX = 0, +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + PUT_RGBLIGHT, +#endif +}; + SSTD_t transactions[] = { - { + [GET_SLAVE_MATRIX] = { (uint8_t *)&status0, sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer, sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer, }, +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + [PUT_RGBLIGHT] = { + (uint8_t *)&status_rgblight, + sizeof(serial_rgblight), + (uint8_t *)&serial_rgblight, + 0, NULL // no slave to master transfer + }, +#endif }; void transport_master_init(void) { soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } void transport_slave_init(void) { soft_serial_target_init(transactions, TID_LIMIT(transactions)); } +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + +// rgblight synchronization information communication. + +void transport_rgblight_master(void) { + if (rgblight_get_change_flags()) { + rgblight_get_syncinfo((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync); + if (soft_serial_transaction(PUT_RGBLIGHT) == TRANSACTION_END) { + rgblight_clear_change_flags(); + } + } +} + +void transport_rgblight_slave(void) { + if (status_rgblight == TRANSACTION_ACCEPTED) { + rgblight_update_sync((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync, + false); + status_rgblight = TRANSACTION_END; + } +} + +#else +#define transport_rgblight_master() +#define transport_rgblight_slave() +#endif + bool transport_master(matrix_row_t matrix[]) { - if (soft_serial_transaction()) { +#ifndef SERIAL_USE_MULTI_TRANSACTION + if (soft_serial_transaction() != TRANSACTION_END) { return false; } +#else + transport_rgblight_master(); + if (soft_serial_transaction(GET_SLAVE_MATRIX) != TRANSACTION_END) { + return false; + } +#endif // TODO: if MATRIX_COLS > 8 change to unpack() for (int i = 0; i < ROWS_PER_HAND; ++i) { @@ -179,23 +226,15 @@ bool transport_master(matrix_row_t matrix[]) { serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0; # endif -# if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) - static rgblight_config_t prev_rgb = {~0}; - uint32_t rgb = rgblight_read_dword(); - if (rgb != prev_rgb.raw) { - serial_m2s_buffer.rgblight_config.raw = rgb; - prev_rgb.raw = rgb; - } -# endif - # ifdef ENCODER_ENABLE - encoder_update_raw((uint8_t*)&serial_s2m_buffer.encoder_state); + encoder_update_raw((uint8_t *)serial_s2m_buffer.encoder_state); # endif return true; } void transport_slave(matrix_row_t matrix[]) { + transport_rgblight_slave(); // TODO: if MATRIX_COLS > 8 change to pack() for (int i = 0; i < ROWS_PER_HAND; ++i) { serial_s2m_buffer.smatrix[i] = matrix[i]; @@ -203,14 +242,11 @@ void transport_slave(matrix_row_t matrix[]) { # ifdef BACKLIGHT_ENABLE backlight_set(serial_m2s_buffer.backlight_level); # endif -# if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) - // Update RGB config with the new data - rgblight_update_dword(serial_m2s_buffer.rgblight_config.raw); -# endif # ifdef ENCODER_ENABLE - encoder_state_raw((uint8_t*)&serial_s2m_buffer.encoder_state); + encoder_state_raw((uint8_t *)serial_s2m_buffer.encoder_state); # endif + } #endif From 4bbdd77e83001f07dd70ad723c951fcea61b48b8 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 22 Apr 2019 09:49:38 -0700 Subject: [PATCH 3/5] Add Changelog --- changelog.md | 1 + 1 file changed, 1 insertion(+) diff --git a/changelog.md b/changelog.md index c2645bb2aa..3ea76a5879 100644 --- a/changelog.md +++ b/changelog.md @@ -5,3 +5,4 @@ 04-16-2019 - Fix info.json for Ergodox EZ 04-16-2019 - Add support for WS2812 based RGB Matrix 04-18-2019 - Fix Eager Per Row Debouncing bug +04-22-2019 - Add Split RGB support From 95f8ac3424871c1ffed11e51f5fba66a192daeb0 Mon Sep 17 00:00:00 2001 From: Ryan Caltabiano Date: Mon, 15 Apr 2019 22:32:57 -0500 Subject: [PATCH 4/5] OLED Driver Feature --- common_features.mk | 7 + drivers/arm/i2c_master.c | 40 ++- drivers/arm/i2c_master.h | 20 +- drivers/avr/i2c_master.c | 4 +- drivers/avr/i2c_master.h | 6 +- drivers/oled/glcdfont.c | 240 +++++++++++++++++ drivers/oled/oled_driver.c | 528 +++++++++++++++++++++++++++++++++++++ drivers/oled/oled_driver.h | 183 +++++++++++++ quantum/quantum.c | 16 ++ quantum/quantum.h | 4 + 10 files changed, 1023 insertions(+), 25 deletions(-) create mode 100644 drivers/oled/glcdfont.c create mode 100644 drivers/oled/oled_driver.c create mode 100644 drivers/oled/oled_driver.h diff --git a/common_features.mk b/common_features.mk index bd1685869d..a61e581397 100644 --- a/common_features.mk +++ b/common_features.mk @@ -334,3 +334,10 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes) endif COMMON_VPATH += $(QUANTUM_PATH)/split_common endif + +ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes) + OPT_DEFS += -DOLED_DRIVER_ENABLE + COMMON_VPATH += $(DRIVER_PATH)/oled + QUANTUM_LIB_SRC += i2c_master.c + SRC += oled_driver.c +endif diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c index 0e5edcc380..7369398cc4 100644 --- a/drivers/arm/i2c_master.c +++ b/drivers/arm/i2c_master.c @@ -42,6 +42,18 @@ static const I2CConfig i2cconfig = { 0 }; +static i2c_status_t chibios_to_qmk(const msg_t* status) { + switch (*status) { + case I2C_NO_ERROR: + return I2C_STATUS_SUCCESS; + case I2C_TIMEOUT: + return I2C_STATUS_TIMEOUT; + // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT + default: + return I2C_STATUS_ERROR; + } +} + __attribute__ ((weak)) void i2c_init(void) { @@ -57,29 +69,30 @@ void i2c_init(void) //i2cInit(); //This is invoked by halInit() so no need to redo it. } -// This is usually not needed -uint8_t i2c_start(uint8_t address) +i2c_status_t i2c_start(uint8_t address) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); - return 0; + return I2C_STATUS_SUCCESS; } -uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); + msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); @@ -91,18 +104,19 @@ uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t l } complete_packet[0] = regaddr; - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) +i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); - return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); + return chibios_to_qmk(&status); } -uint8_t i2c_stop(void) +void i2c_stop(void) { i2cStop(&I2C_DRIVER); - return 0; } diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h index 4ab2301f8c..a15f1702dd 100644 --- a/drivers/arm/i2c_master.h +++ b/drivers/arm/i2c_master.h @@ -40,11 +40,17 @@ #define I2C_DRIVER I2CD1 #endif +typedef int16_t i2c_status_t; + +#define I2C_STATUS_SUCCESS (0) +#define I2C_STATUS_ERROR (-1) +#define I2C_STATUS_TIMEOUT (-2) + void i2c_init(void); -uint8_t i2c_start(uint8_t address); -uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); -uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); -uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length); -uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); -uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout); -uint8_t i2c_stop(void); +i2c_status_t i2c_start(uint8_t address); +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length); +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout); +void i2c_stop(void); diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c index 0db949db4a..6137f9b15f 100755 --- a/drivers/avr/i2c_master.c +++ b/drivers/avr/i2c_master.c @@ -109,7 +109,7 @@ int16_t i2c_read_nack(uint16_t timeout) { return TWDR; } -i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_status_t status = i2c_start(address | I2C_WRITE, timeout); for (uint16_t i = 0; i < length && status >= 0; i++) { @@ -143,7 +143,7 @@ i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16 return (status < 0) ? status : I2C_STATUS_SUCCESS; } -i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_status_t status = i2c_start(devaddr | 0x00, timeout); if (status >= 0) { status = i2c_write(regaddr, timeout); diff --git a/drivers/avr/i2c_master.h b/drivers/avr/i2c_master.h index 81a7fb5e32..b4613115d9 100755 --- a/drivers/avr/i2c_master.h +++ b/drivers/avr/i2c_master.h @@ -22,10 +22,10 @@ i2c_status_t i2c_start(uint8_t address, uint16_t timeout); i2c_status_t i2c_write(uint8_t data, uint16_t timeout); int16_t i2c_read_ack(uint16_t timeout); int16_t i2c_read_nack(uint16_t timeout); -i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); void i2c_stop(void); -#endif // I2C_MASTER_H \ No newline at end of file +#endif // I2C_MASTER_H diff --git a/drivers/oled/glcdfont.c b/drivers/oled/glcdfont.c new file mode 100644 index 0000000000..150be9e944 --- /dev/null +++ b/drivers/oled/glcdfont.c @@ -0,0 +1,240 @@ +#pragma once + +#ifdef __AVR__ + #include + #include +#elif defined(ESP8266) + #include +#else + #define PROGMEM +#endif + +// Helidox 8x6 font with QMK Firmware Logo +// Online editor: http://teripom.x0.com/ + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x40, 0x40, 0x40, 0xF0, 0xF8, 0xF8, + 0xFF, 0x38, 0xFF, 0xF8, 0xF8, 0x3F, + 0xF8, 0xF8, 0xFF, 0x38, 0xFF, 0xF8, + 0xF8, 0xF0, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0xC0, 0xC0, 0xC0, 0x80, 0x00, 0x00, + 0xC0, 0xC0, 0x80, 0x00, 0x00, 0x00, + 0x80, 0xC0, 0xC0, 0x00, 0xC0, 0xC0, + 0x00, 0x00, 0x80, 0xC0, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, + 0xC0, 0xC0, 0xC0, 0x00, 0xC0, 0xC0, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, + 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, + 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, + 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, + 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, + 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, + 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0xE0, 0xEC, 0xDF, + 0xFC, 0xE0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x49, 0x49, 0x49, 0xFF, 0xFF, 0xFF, + 0xFF, 0xE0, 0xDF, 0xBF, 0xBF, 0x00, + 0xBF, 0xBF, 0xDF, 0xE0, 0xFF, 0xFF, + 0xFF, 0xFF, 0x49, 0x49, 0x49, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x3F, + 0x60, 0x60, 0xE0, 0xBF, 0x1F, 0x00, + 0x7F, 0x7F, 0x07, 0x1E, 0x38, 0x1E, + 0x07, 0x7F, 0x7F, 0x00, 0x7F, 0x7F, + 0x0E, 0x1F, 0x3B, 0x71, 0x60, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x7F, 0x7F, + 0x0C, 0x0C, 0x0C, 0x00, 0x7E, 0x7E, + 0x00, 0x7F, 0x7E, 0x03, 0x03, 0x00, + 0x7F, 0x7E, 0x03, 0x03, 0x7E, 0x7E, + 0x03, 0x03, 0x7F, 0x7E, 0x00, 0x0F, + 0x3E, 0x70, 0x3C, 0x06, 0x3C, 0x70, + 0x3E, 0x0F, 0x00, 0x32, 0x7B, 0x49, + 0x49, 0x3F, 0x7E, 0x00, 0x7F, 0x7E, + 0x03, 0x03, 0x00, 0x1E, 0x3F, 0x69, + 0x69, 0x6F, 0x26, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, + 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, + 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, + 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, + 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, + 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, + 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, + 0x40, 0x7C, 0x3F, 0x3F, 0x23, 0x01, + 0x23, 0x3F, 0x37, 0x6C, 0x40, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x01, 0x01, 0x07, 0x0F, 0x0F, + 0x7F, 0x0F, 0x7F, 0x0F, 0x0F, 0x7E, + 0x0F, 0x0F, 0x7F, 0x0F, 0x7F, 0x0F, + 0x0F, 0x07, 0x01, 0x01, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x01, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c new file mode 100644 index 0000000000..aa025d7a4c --- /dev/null +++ b/drivers/oled/oled_driver.c @@ -0,0 +1,528 @@ +/* +Copyright 2019 Ryan Caltabiano + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "i2c_master.h" +#include "oled_driver.h" +#include OLED_FONT_H +#include "timer.h" +#include "print.h" + +#include + +#if defined(__AVR__) + #include + #include +#elif defined(ESP8266) + #include +#else // defined(ESP8266) + #define PROGMEM + #define memcpy_P(des, src, len) memcpy(des, src, len) +#endif // defined(__AVR__) + +// Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf +// Fundamental Commands +#define CONTRAST 0x81 +#define DISPLAY_ALL_ON 0xA5 +#define DISPLAY_ALL_ON_RESUME 0xA4 +#define NORMAL_DISPLAY 0xA6 +#define DISPLAY_ON 0xAF +#define DISPLAY_OFF 0xAE + +// Scrolling Commands +#define ACTIVATE_SCROLL 0x2F +#define DEACTIVATE_SCROLL 0x2E +#define SCROLL_RIGHT 0x26 +#define SCROLL_LEFT 0x27 +#define SCROLL_RIGHT_UP 0x29 +#define SCROLL_LEFT_UP 0x2A + +// Addressing Setting Commands +#define MEMORY_MODE 0x20 +#define COLUMN_ADDR 0x21 +#define PAGE_ADDR 0x22 + +// Hardware Configuration Commands +#define DISPLAY_START_LINE 0x40 +#define SEGMENT_REMAP 0xA0 +#define SEGMENT_REMAP_INV 0xA1 +#define MULTIPLEX_RATIO 0xA8 +#define COM_SCAN_INC 0xC0 +#define COM_SCAN_DEC 0xC8 +#define DISPLAY_OFFSET 0xD3 +#define COM_PINS 0xDA + +// Timing & Driving Commands +#define DISPLAY_CLOCK 0xD5 +#define PRE_CHARGE_PERIOD 0xD9 +#define VCOM_DETECT 0xDB + +// Charge Pump Commands +#define CHARGE_PUMP 0x8D + +// Misc defines +#define OLED_TIMEOUT 60000 +#define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) +#define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) + +// i2c defines +#define I2C_CMD 0x00 +#define I2C_DATA 0x40 +#if defined(__AVR__) + // already defined on ARM + #define I2C_TIMEOUT 100 + #define I2C_TRANSMIT_P(data) i2c_transmit_P((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT) +#else // defined(__AVR__) + #define I2C_TRANSMIT_P(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT) +#endif // defined(__AVR__) +#define I2C_TRANSMIT(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT) +#define I2C_WRITE_REG(mode, data, size) i2c_writeReg((OLED_DISPLAY_ADDRESS << 1), mode, data, size, I2C_TIMEOUT) + +#define HAS_FLAGS(bits, flags) ((bits & flags) == flags) + +// Display buffer's is the same as the OLED memory layout +// this is so we don't end up with rounding errors with +// parts of the display unusable or don't get cleared correctly +// and also allows for drawing & inverting +uint8_t oled_buffer[OLED_MATRIX_SIZE]; +uint8_t* oled_cursor; +OLED_BLOCK_TYPE oled_dirty = 0; +bool oled_initialized = false; +bool oled_active = false; +bool oled_scrolling = false; +uint8_t oled_rotation = 0; +uint8_t oled_rotation_width = 0; +#if !defined(OLED_DISABLE_TIMEOUT) + uint16_t oled_last_activity; +#endif + +// Internal variables to reduce math instructions + +#if defined(__AVR__) +// identical to i2c_transmit, but for PROGMEM since all initialization is in PROGMEM arrays currently +// probably should move this into i2c_master... +static i2c_status_t i2c_transmit_P(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_status_t status = i2c_start(address | I2C_WRITE, timeout); + + for (uint16_t i = 0; i < length && status >= 0; i++) { + status = i2c_write(pgm_read_byte((const char*)data++), timeout); + if (status) break; + } + + i2c_stop(); + + return status; +} +#endif + +// Flips the rendering bits for a character at the current cursor position +static void InvertCharacter(uint8_t *cursor) +{ + const uint8_t *end = cursor + OLED_FONT_WIDTH; + while (cursor < end) { + *cursor = ~(*cursor); + cursor++; + } +} + +bool oled_init(uint8_t rotation) { + oled_rotation = oled_init_user(rotation); + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + oled_rotation_width = OLED_DISPLAY_WIDTH; + } else { + oled_rotation_width = OLED_DISPLAY_HEIGHT; + } + i2c_init(); + + static const uint8_t PROGMEM display_setup1[] = { + I2C_CMD, + DISPLAY_OFF, + DISPLAY_CLOCK, 0x80, + MULTIPLEX_RATIO, OLED_DISPLAY_HEIGHT - 1, + DISPLAY_OFFSET, 0x00, + DISPLAY_START_LINE | 0x00, + CHARGE_PUMP, 0x14, + MEMORY_MODE, 0x00, }; // Horizontal addressing mode + if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) { + print("oled_init cmd set 1 failed\n"); + return false; + } + + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) { + static const uint8_t PROGMEM display_normal[] = { + I2C_CMD, + SEGMENT_REMAP_INV, + COM_SCAN_DEC }; + if (I2C_TRANSMIT_P(display_normal) != I2C_STATUS_SUCCESS) { + print("oled_init cmd normal rotation failed\n"); + return false; + } + } else { + static const uint8_t PROGMEM display_flipped[] = { + I2C_CMD, + SEGMENT_REMAP, + COM_SCAN_INC }; + if (I2C_TRANSMIT_P(display_flipped) != I2C_STATUS_SUCCESS) { + print("display_flipped failed\n"); + return false; + } + } + + static const uint8_t PROGMEM display_setup2[] = { + I2C_CMD, + COM_PINS, 0x02, + CONTRAST, 0x8F, + PRE_CHARGE_PERIOD, 0xF1, + VCOM_DETECT, 0x40, + DISPLAY_ALL_ON_RESUME, + NORMAL_DISPLAY, + DEACTIVATE_SCROLL, + DISPLAY_ON }; + if (I2C_TRANSMIT_P(display_setup2) != I2C_STATUS_SUCCESS) { + print("display_setup2 failed\n"); + return false; + } + + oled_clear(); + oled_initialized = true; + oled_active = true; + oled_scrolling = false; + return true; +} + +__attribute__((weak)) +uint8_t oled_init_user(uint8_t rotation) { + return rotation; +} + +void oled_clear(void) { + memset(oled_buffer, 0, sizeof(oled_buffer)); + oled_cursor = &oled_buffer[0]; + oled_dirty = -1; // -1 will be max value as long as display_dirty is unsigned type +} + +static void calc_bounds(uint8_t update_start, uint8_t* cmd_array) +{ + cmd_array[1] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH; + cmd_array[4] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH; + cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1]; + cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1; +} + +static void calc_bounds_90(uint8_t update_start, uint8_t* cmd_array) +{ + cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8; + cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT; + cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1];; + cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8; +} + +uint8_t crot(uint8_t a, int8_t n) +{ + const uint8_t mask = 0x7; + n &= mask; + return a << n | a >> (-n & mask); +} + +static void rotate_90(const uint8_t* src, uint8_t* dest) +{ + for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) { + uint8_t selector = (1 << i); + for (uint8_t j = 0; j < 8; ++j) { + dest[i] |= crot(src[j] & selector, shift - (int8_t)j); + } + } +} + +void oled_render(void) { + // Do we have work to do? + if (!oled_dirty || oled_scrolling) { + return; + } + + // Find first dirty block + uint8_t update_start = 0; + while (!(oled_dirty & (1 << update_start))) { ++update_start; } + + // Set column & page position + static uint8_t display_start[] = { + I2C_CMD, + COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, + PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1 }; + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + calc_bounds(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start + } else { + calc_bounds_90(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start + } + + // Send column & page position + if (I2C_TRANSMIT(display_start) != I2C_STATUS_SUCCESS) { + print("oled_render offset command failed\n"); + return; + } + + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + // Send render data chunk as is + if (I2C_WRITE_REG(I2C_DATA, &oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) { + print("oled_render data failed\n"); + return; + } + } else { + // Rotate the render chunks + const static uint8_t source_map[] = OLED_SOURCE_MAP; + const static uint8_t target_map[] = OLED_TARGET_MAP; + + static uint8_t temp_buffer[OLED_BLOCK_SIZE]; + memset(temp_buffer, 0, sizeof(temp_buffer)); + for(uint8_t i = 0; i < sizeof(source_map); ++i) { + rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]); + } + + // Send render data chunk after rotating + if (I2C_WRITE_REG(I2C_DATA, &temp_buffer[0], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) { + print("oled_render data failed\n"); + return; + } + } + + // Turn on display if it is off + oled_on(); + + // Clear dirty flag + oled_dirty &= ~(1 << update_start); +} + +void oled_set_cursor(uint8_t col, uint8_t line) { + uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH; + + // Out of bounds? + if (index >= OLED_MATRIX_SIZE) { + index = 0; + } + + oled_cursor = &oled_buffer[index]; +} + +void oled_advance_page(bool clearPageRemainder) { + uint16_t index = oled_cursor - &oled_buffer[0]; + uint8_t remaining = oled_rotation_width - (index % oled_rotation_width); + + if (clearPageRemainder) { + // Remaining Char count + remaining = remaining / OLED_FONT_WIDTH; + + // Write empty character until next line + while (remaining--) + oled_write_char(' ', false); + } else { + // Next page index out of bounds? + if (index + remaining >= OLED_MATRIX_SIZE) { + index = 0; + remaining = 0; + } + + oled_cursor = &oled_buffer[index + remaining]; + } +} + +void oled_advance_char(void) { + uint16_t nextIndex = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH; + uint8_t remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width); + + // Do we have enough space on the current line for the next character + if (remainingSpace < OLED_FONT_WIDTH) { + nextIndex += remainingSpace; + } + + // Did we go out of bounds + if (nextIndex >= OLED_MATRIX_SIZE) { + nextIndex = 0; + } + + // Update cursor position + oled_cursor = &oled_buffer[nextIndex]; +} + +// Main handler that writes character data to the display buffer +void oled_write_char(const char data, bool invert) { + // Advance to the next line if newline + if (data == '\n') { + // Old source wrote ' ' until end of line... + oled_advance_page(true); + return; + } + + // copy the current render buffer to check for dirty after + static uint8_t oled_temp_buffer[OLED_FONT_WIDTH]; + memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH); + + // set the reder buffer data + uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index + if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) { + memset(oled_cursor, 0x00, OLED_FONT_WIDTH); + } else { + const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH]; + memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH); + } + + // Invert if needed + if (invert) { + InvertCharacter(oled_cursor); + } + + // Dirty check + if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) { + oled_dirty |= (1 << ((oled_cursor - &oled_buffer[0]) / OLED_BLOCK_SIZE)); + } + + // Finally move to the next char + oled_advance_char(); +} + +void oled_write(const char *data, bool invert) { + const char *end = data + strlen(data); + while (data < end) { + oled_write_char(*data, invert); + data++; + } +} + +void oled_write_ln(const char *data, bool invert) { + oled_write(data, invert); + oled_advance_page(true); +} + +#if defined(__AVR__) +void oled_write_P(const char *data, bool invert) { + uint8_t c = pgm_read_byte(data); + while (c != 0) { + oled_write_char(c, invert); + c = pgm_read_byte(++data); + } +} + +void oled_write_ln_P(const char *data, bool invert) { + oled_write_P(data, invert); + oled_advance_page(true); +} +#endif // defined(__AVR__) + +bool oled_on(void) { +#if !defined(OLED_DISABLE_TIMEOUT) + oled_last_activity = timer_read(); +#endif + + static const uint8_t PROGMEM display_on[] = { I2C_CMD, DISPLAY_ON }; + if (!oled_active) { + if (I2C_TRANSMIT_P(display_on) != I2C_STATUS_SUCCESS) { + print("oled_on cmd failed\n"); + return oled_active; + } + oled_active = true; + } + return oled_active; +} + +bool oled_off(void) { + static const uint8_t PROGMEM display_off[] = { I2C_CMD, DISPLAY_OFF }; + if (oled_active) { + if (I2C_TRANSMIT_P(display_off) != I2C_STATUS_SUCCESS) { + print("oled_off cmd failed\n"); + return oled_active; + } + oled_active = false; + } + return !oled_active; +} + +bool oled_scroll_right(void) { + // Dont enable scrolling if we need to update the display + // This prevents scrolling of bad data from starting the scroll too early after init + if (!oled_dirty && !oled_scrolling) { + static const uint8_t PROGMEM display_scroll_right[] = { + I2C_CMD, SCROLL_RIGHT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL }; + if (I2C_TRANSMIT_P(display_scroll_right) != I2C_STATUS_SUCCESS) { + print("oled_scroll_right cmd failed\n"); + return oled_scrolling; + } + oled_scrolling = true; + } + return oled_scrolling; +} + +bool oled_scroll_left(void) { + // Dont enable scrolling if we need to update the display + // This prevents scrolling of bad data from starting the scroll too early after init + if (!oled_dirty && !oled_scrolling) { + static const uint8_t PROGMEM display_scroll_left[] = { + I2C_CMD, SCROLL_LEFT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL }; + if (I2C_TRANSMIT_P(display_scroll_left) != I2C_STATUS_SUCCESS) { + print("oled_scroll_left cmd failed\n"); + return oled_scrolling; + } + oled_scrolling = true; + } + return oled_scrolling; +} + +bool oled_scroll_off(void) { + if (oled_scrolling) { + static const uint8_t PROGMEM display_scroll_off[] = { I2C_CMD, DEACTIVATE_SCROLL }; + if (I2C_TRANSMIT_P(display_scroll_off) != I2C_STATUS_SUCCESS) { + print("oled_scroll_off cmd failed\n"); + return oled_scrolling; + } + oled_scrolling = false; + } + return !oled_scrolling; +} + +uint8_t oled_max_chars(void) { + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH; + } + return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH; +} + +uint8_t oled_max_lines(void) { + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT; + } + return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT; +} + +void oled_task(void) { + if (!oled_initialized) { + return; + } + + oled_set_cursor(0, 0); + + oled_task_user(); + + // Smart render system, no need to check for dirty + oled_render(); + + // Display timeout check +#if !defined(OLED_DISABLE_TIMEOUT) + if (oled_active && timer_elapsed(oled_last_activity) > OLED_TIMEOUT) { + oled_off(); + } +#endif +} + +__attribute__((weak)) +void oled_task_user(void) { +} diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h new file mode 100644 index 0000000000..1ca31df114 --- /dev/null +++ b/drivers/oled/oled_driver.h @@ -0,0 +1,183 @@ +/* +Copyright 2019 Ryan Caltabiano + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include +#include + + +#if defined(OLED_DISPLAY_CUSTOM) + // Expected user to implement the necessary defines +#elif defined(OLED_DISPLAY_128X64) + // Double height 128x64 + #define OLED_DISPLAY_WIDTH 128 + #define OLED_DISPLAY_HEIGHT 64 + #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed) + #define OLED_BLOCK_TYPE uint16_t + #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed) + #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 64 (compile time mathed) + + // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays + // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode + #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } + #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 } + // If OLED_BLOCK_TYPE is uint8_t, these tables would look like: + // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 } + // #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 } +#else // defined(OLED_DISPLAY_128X64) + // Default 128x32 + #define OLED_DISPLAY_WIDTH 128 + #define OLED_DISPLAY_HEIGHT 32 + #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed) + #define OLED_BLOCK_TYPE uint8_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only + #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed) + #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 128 (compile time mathed) + + // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays + // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode + #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } + #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 } +#endif // defined(OLED_DISPLAY_CUSTOM) + +// Address to use for tthe i2d oled communication +#if !defined(OLED_DISPLAY_ADDRESS) + #define OLED_DISPLAY_ADDRESS 0x3C +#endif + +// Custom font file to use +#if !defined(OLED_FONT_H) + #define OLED_FONT_H "glcdfont.c" +#endif +// unsigned char value of the first character in the font file +#if !defined(OLED_FONT_START) + #define OLED_FONT_START 0 +#endif +// unsigned char value of the last character in the font file +#if !defined(OLED_FONT_END) + #define OLED_FONT_END 224 +#endif +// Font render width +#if !defined(OLED_FONT_WIDTH) + #define OLED_FONT_WIDTH 6 +#endif +// Font render height +#if !defined(OLED_FONT_HEIGHT) + #define OLED_FONT_HEIGHT 8 +#endif + +#define OLED_ROTATION_0 0x00 +#define OLED_ROTATION_90 0x01 +#define OLED_ROTATION_180 0x02 +#define OLED_ROTATION_270 0x03 + +// Initialize the oled display, rotating the rendered output based on the define passed in. +// Returns true if the OLED was initialized successfully +bool oled_init(uint8_t rotation); + +// Called at the start of oled_init, weak function overridable by the user +// rotation - the value passed into oled_init +// Return new uint8_t if you want to override default rotation +uint8_t oled_init_user(uint8_t rotation); + +// Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering +void oled_clear(void); + +// Renders the dirty chunks of the buffer to oled display +void oled_render(void); + +// Moves cursor to character position indicated by column and line, wraps if out of bounds +// Max column denoted by 'oled_max_chars()' and max lines by 'oled_max_lines()' functions +void oled_set_cursor(uint8_t col, uint8_t line); + +// Advances the cursor to the next page, writing ' ' if true +// Wraps to the begining when out of bounds +void oled_advance_page(bool clearPageRemainder); + +// Moves the cursor forward 1 character length +// Advance page if there is not enough room for the next character +// Wraps to the begining when out of bounds +void oled_advance_char(void); + +// Writes a single character to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Main handler that writes character data to the display buffer +void oled_write_char(const char data, bool invert); + +// Writes a string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +void oled_write(const char *data, bool invert); + +// Writes a string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Advances the cursor to the next page, wiring ' ' to the remainder of the current page +void oled_write_ln(const char *data, bool invert); + +#if defined(__AVR__) +// Writes a PROGMEM string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Remapped to call 'void oled_write(const char *data, bool invert);' on ARM +void oled_write_P(const char *data, bool invert); + +// Writes a PROGMEM string to the buffer at current cursor position +// Advances the cursor while writing, inverts the pixels if true +// Advances the cursor to the next page, wiring ' ' to the remainder of the current page +// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM +void oled_write_ln_P(const char *data, bool invert); +#else + // Writes a string to the buffer at current cursor position + // Advances the cursor while writing, inverts the pixels if true + #define oled_write_P(data, invert) oled_write(data, invert) + + // Writes a string to the buffer at current cursor position + // Advances the cursor while writing, inverts the pixels if true + // Advances the cursor to the next page, wiring ' ' to the remainder of the current page + #define oled_write_ln_P(data, invert) oled_write(data, invert) +#endif // defined(__AVR__) + +// Can be used to manually turn on the screen if it is off +// Returns true if the screen was on or turns on +bool oled_on(void); + +// Can be used to manually turn off the screen if it is on +// Returns true if the screen was off or turns off +bool oled_off(void); + +// Basically it's oled_render, but with timeout management and oled_task_user calling! +void oled_task(void); + +// Called at the start of oled_task, weak function overridable by the user +void oled_task_user(void); + +// Scrolls the entire display right +// Returns true if the screen was scrolling or starts scrolling +// NOTE: display contents cannot be changed while scrolling +bool oled_scroll_right(void); + +// Scrolls the entire display left +// Returns true if the screen was scrolling or starts scrolling +// NOTE: display contents cannot be changed while scrolling +bool oled_scroll_left(void); + +// Turns off display scrolling +// Returns true if the screen was not scrolling or stops scrolling +bool oled_scroll_off(void); + +// Returns the maximum number of characters that will fit on a line +uint8_t oled_max_chars(void); + +// Returns the maximum number of lines that will fit on the oled +uint8_t oled_max_lines(void); diff --git a/quantum/quantum.c b/quantum/quantum.c index 4d8d2482d0..86dc00381e 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -275,6 +275,12 @@ bool process_record_quantum(keyrecord_t *record) { preprocess_tap_dance(keycode, record); #endif + #if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT) + // Wake up oled if user is using those fabulous keys! + if (record->event.pressed) + oled_on(); + #endif + if (!( #if defined(KEY_LOCK_ENABLE) // Must run first to be able to mask key_up events. @@ -1084,6 +1090,12 @@ void matrix_init_quantum() { #ifdef HAPTIC_ENABLE haptic_init(); #endif + #ifdef OUTPUT_AUTO_ENABLE + set_output(OUTPUT_AUTO); + #endif + #ifdef OLED_DRIVER_ENABLE + oled_init(OLED_ROTATION_0); + #endif matrix_init_kb(); } @@ -1120,6 +1132,10 @@ void matrix_scan_quantum() { haptic_task(); #endif + #ifdef OLED_DRIVER_ENABLE + oled_task(); + #endif + matrix_scan_kb(); } #if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_PIN) diff --git a/quantum/quantum.h b/quantum/quantum.h index e2f467125e..987516dedb 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -139,6 +139,10 @@ extern uint32_t default_layer_state; #include "haptic.h" #endif +#ifdef OLED_DRIVER_ENABLE + #include "oled_driver.h" +#endif + //Function substitutions to ease GPIO manipulation #ifdef __AVR__ #define PIN_ADDRESS(p, offset) _SFR_IO8(ADDRESS_BASE + (p >> PORT_SHIFTER) + offset) From 28cbf7c352c9cb064d9054cd94cd2333fc07ad4a Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 22 Apr 2019 09:58:01 -0700 Subject: [PATCH 5/5] Add changelog --- changelog.md | 1 + 1 file changed, 1 insertion(+) diff --git a/changelog.md b/changelog.md index c2645bb2aa..78860073e0 100644 --- a/changelog.md +++ b/changelog.md @@ -5,3 +5,4 @@ 04-16-2019 - Fix info.json for Ergodox EZ 04-16-2019 - Add support for WS2812 based RGB Matrix 04-18-2019 - Fix Eager Per Row Debouncing bug +04-22-2019 - OLED Driver Features