diff --git a/LUFA/Drivers/Misc/TerminalCodes.h b/LUFA/Drivers/Misc/TerminalCodes.h
index 25037cc919..f6673bc81b 100644
--- a/LUFA/Drivers/Misc/TerminalCodes.h
+++ b/LUFA/Drivers/Misc/TerminalCodes.h
@@ -63,143 +63,159 @@
/* Public Interface - May be used in end-application: */
/* Macros: */
#if !defined(DISABLE_TERMINAL_CODES)
- /** Creates an ANSI escape sequence with the payload specified by "c".
+ /** Creates an ANSI escape sequence with the specified payload.
*
- * \param[in] c Payload to encode as an ANSI escape sequence, a ESC_* mask.
+ * \param[in] EscapeSeq Payload to encode as an ANSI escape sequence, a ESC_* mask.
*/
- #define ANSI_ESCAPE_SEQUENCE(c) "\33[" c
+ #define ANSI_ESCAPE_SEQUENCE(EscapeSeq) "\33[" EscapeSeq
#else
- #define ANSI_ESCAPE_SEQUENCE(c)
+ #define ANSI_ESCAPE_SEQUENCE(EscapeSeq)
#endif
/** \name Text Display Modifier Escape Sequences */
//@{
/** Turns on bold so that any following text is printed to the terminal in bold. */
- #define ESC_BOLD_ON ANSI_ESCAPE_SEQUENCE("1m")
+ #define ESC_BOLD_ON ANSI_ESCAPE_SEQUENCE("1m")
/** Turns on italics so that any following text is printed to the terminal in italics. */
- #define ESC_ITALICS_ON ANSI_ESCAPE_SEQUENCE("3m")
+ #define ESC_ITALICS_ON ANSI_ESCAPE_SEQUENCE("3m")
/** Turns on underline so that any following text is printed to the terminal underlined. */
- #define ESC_UNDERLINE_ON ANSI_ESCAPE_SEQUENCE("4m")
+ #define ESC_UNDERLINE_ON ANSI_ESCAPE_SEQUENCE("4m")
/** Turns on inverse so that any following text is printed to the terminal in inverted colours. */
- #define ESC_INVERSE_ON ANSI_ESCAPE_SEQUENCE("7m")
+ #define ESC_INVERSE_ON ANSI_ESCAPE_SEQUENCE("7m")
/** Turns on strikethrough so that any following text is printed to the terminal with a line through the
* center.
*/
- #define ESC_STRIKETHROUGH_ON ANSI_ESCAPE_SEQUENCE("9m")
+ #define ESC_STRIKETHROUGH_ON ANSI_ESCAPE_SEQUENCE("9m")
/** Turns off bold so that any following text is printed to the terminal in non bold. */
- #define ESC_BOLD_OFF ANSI_ESCAPE_SEQUENCE("22m")
+ #define ESC_BOLD_OFF ANSI_ESCAPE_SEQUENCE("22m")
/** Turns off italics so that any following text is printed to the terminal in non italics. */
- #define ESC_ITALICS_OFF ANSI_ESCAPE_SEQUENCE("23m")
+ #define ESC_ITALICS_OFF ANSI_ESCAPE_SEQUENCE("23m")
/** Turns off underline so that any following text is printed to the terminal non underlined. */
- #define ESC_UNDERLINE_OFF ANSI_ESCAPE_SEQUENCE("24m")
+ #define ESC_UNDERLINE_OFF ANSI_ESCAPE_SEQUENCE("24m")
/** Turns off inverse so that any following text is printed to the terminal in non inverted colours. */
- #define ESC_INVERSE_OFF ANSI_ESCAPE_SEQUENCE("27m")
+ #define ESC_INVERSE_OFF ANSI_ESCAPE_SEQUENCE("27m")
/** Turns off strikethrough so that any following text is printed to the terminal without a line through
* the center.
*/
- #define ESC_STRIKETHROUGH_OFF ANSI_ESCAPE_SEQUENCE("29m")
+ #define ESC_STRIKETHROUGH_OFF ANSI_ESCAPE_SEQUENCE("29m")
//@}
/** \name Text Colour Control Sequences */
//@{
/** Sets the foreground (text) colour to black. */
- #define ESC_FG_BLACK ANSI_ESCAPE_SEQUENCE("30m")
+ #define ESC_FG_BLACK ANSI_ESCAPE_SEQUENCE("30m")
/** Sets the foreground (text) colour to red. */
- #define ESC_FG_RED ANSI_ESCAPE_SEQUENCE("31m")
+ #define ESC_FG_RED ANSI_ESCAPE_SEQUENCE("31m")
/** Sets the foreground (text) colour to green. */
- #define ESC_FG_GREEN ANSI_ESCAPE_SEQUENCE("32m")
+ #define ESC_FG_GREEN ANSI_ESCAPE_SEQUENCE("32m")
/** Sets the foreground (text) colour to yellow. */
- #define ESC_FG_YELLOW ANSI_ESCAPE_SEQUENCE("33m")
+ #define ESC_FG_YELLOW ANSI_ESCAPE_SEQUENCE("33m")
/** Sets the foreground (text) colour to blue. */
- #define ESC_FG_BLUE ANSI_ESCAPE_SEQUENCE("34m")
+ #define ESC_FG_BLUE ANSI_ESCAPE_SEQUENCE("34m")
/** Sets the foreground (text) colour to magenta. */
- #define ESC_FG_MAGENTA ANSI_ESCAPE_SEQUENCE("35m")
+ #define ESC_FG_MAGENTA ANSI_ESCAPE_SEQUENCE("35m")
/** Sets the foreground (text) colour to cyan. */
- #define ESC_FG_CYAN ANSI_ESCAPE_SEQUENCE("36m")
+ #define ESC_FG_CYAN ANSI_ESCAPE_SEQUENCE("36m")
/** Sets the foreground (text) colour to white. */
- #define ESC_FG_WHITE ANSI_ESCAPE_SEQUENCE("37m")
+ #define ESC_FG_WHITE ANSI_ESCAPE_SEQUENCE("37m")
/** Sets the foreground (text) colour to the terminal's default. */
- #define ESC_FG_DEFAULT ANSI_ESCAPE_SEQUENCE("39m")
+ #define ESC_FG_DEFAULT ANSI_ESCAPE_SEQUENCE("39m")
/** Sets the text background colour to black. */
- #define ESC_BG_BLACK ANSI_ESCAPE_SEQUENCE("40m")
+ #define ESC_BG_BLACK ANSI_ESCAPE_SEQUENCE("40m")
/** Sets the text background colour to red. */
- #define ESC_BG_RED ANSI_ESCAPE_SEQUENCE("41m")
+ #define ESC_BG_RED ANSI_ESCAPE_SEQUENCE("41m")
/** Sets the text background colour to green. */
- #define ESC_BG_GREEN ANSI_ESCAPE_SEQUENCE("42m")
+ #define ESC_BG_GREEN ANSI_ESCAPE_SEQUENCE("42m")
/** Sets the text background colour to yellow. */
- #define ESC_BG_YELLOW ANSI_ESCAPE_SEQUENCE("43m")
+ #define ESC_BG_YELLOW ANSI_ESCAPE_SEQUENCE("43m")
/** Sets the text background colour to blue. */
- #define ESC_BG_BLUE ANSI_ESCAPE_SEQUENCE("44m")
+ #define ESC_BG_BLUE ANSI_ESCAPE_SEQUENCE("44m")
/** Sets the text background colour to magenta. */
- #define ESC_BG_MAGENTA ANSI_ESCAPE_SEQUENCE("45m")
+ #define ESC_BG_MAGENTA ANSI_ESCAPE_SEQUENCE("45m")
/** Sets the text background colour to cyan. */
- #define ESC_BG_CYAN ANSI_ESCAPE_SEQUENCE("46m")
+ #define ESC_BG_CYAN ANSI_ESCAPE_SEQUENCE("46m")
/** Sets the text background colour to white. */
- #define ESC_BG_WHITE ANSI_ESCAPE_SEQUENCE("47m")
+ #define ESC_BG_WHITE ANSI_ESCAPE_SEQUENCE("47m")
/** Sets the text background colour to the terminal's default. */
- #define ESC_BG_DEFAULT ANSI_ESCAPE_SEQUENCE("49m")
+ #define ESC_BG_DEFAULT ANSI_ESCAPE_SEQUENCE("49m")
//@}
/** \name Cursor Positioning Control Sequences */
//@{
- /** Sets the cursor position to the given line and column. */
- #define ESC_CURSOR_POS(L, C) ANSI_ESCAPE_SEQUENCE(#L ";" #C "H")
+ /** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */
+ #define ESC_CURSOR_POS_SAVE ANSI_ESCAPE_SEQUENCE("s")
- /** Moves the cursor up the given number of lines. */
- #define ESC_CURSOR_UP(L) ANSI_ESCAPE_SEQUENCE(#L "A")
+ /** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */
+ #define ESC_CURSOR_POS_RESTORE ANSI_ESCAPE_SEQUENCE("u")
- /** Moves the cursor down the given number of lines. */
- #define ESC_CURSOR_DOWN(L) ANSI_ESCAPE_SEQUENCE(#L "B")
+ /** Sets the cursor position to the given line and column.
+ *
+ * \param[in] Line Line number to position the cursor at
+ * \param[in] Column Column number to position the cursor at
+ */
+ #define ESC_CURSOR_POS(Line, Column) ANSI_ESCAPE_SEQUENCE(#Line ";" #Column "H")
- /** Moves the cursor to the right the given number of columns. */
- #define ESC_CURSOR_FORWARD(C) ANSI_ESCAPE_SEQUENCE(#C "C")
+ /** Moves the cursor up the given number of lines.
+ *
+ * \param[in] Lines Number of lines to move the cursor position
+ */
+ #define ESC_CURSOR_UP(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "A")
- /** Moves the cursor to the left the given number of columns. */
- #define ESC_CURSOR_BACKWARD(C) ANSI_ESCAPE_SEQUENCE(#C "D")
+ /** Moves the cursor down the given number of lines.
+ *
+ * \param[in] Lines Number of lines to move the cursor position
+ */
+ #define ESC_CURSOR_DOWN(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "B")
- /** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */
- #define ESC_CURSOR_POS_SAVE ANSI_ESCAPE_SEQUENCE("s")
+ /** Moves the cursor to the right the given number of columns.
+ *
+ * \param[in] Columns Number of columns to move the cursor position
+ */
+ #define ESC_CURSOR_FORWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "C")
- /** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */
- #define ESC_CURSOR_POS_RESTORE ANSI_ESCAPE_SEQUENCE("u")
+ /** Moves the cursor to the left the given number of columns.
+ *
+ * \param[in] Columns Number of columns to move the cursor position
+ */
+ #define ESC_CURSOR_BACKWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "D")
//@}
/** \name Miscellaneous Control Sequences */
//@{
/** Resets any escape sequence modifiers back to their defaults. */
- #define ESC_RESET ANSI_ESCAPE_SEQUENCE("0m")
+ #define ESC_RESET ANSI_ESCAPE_SEQUENCE("0m")
/** Erases the entire display, returning the cursor to the top left. */
- #define ESC_ERASE_DISPLAY ANSI_ESCAPE_SEQUENCE("2J")
+ #define ESC_ERASE_DISPLAY ANSI_ESCAPE_SEQUENCE("2J")
/** Erases the current line, returning the cursor to the far left. */
- #define ESC_ERASE_LINE ANSI_ESCAPE_SEQUENCE("K")
+ #define ESC_ERASE_LINE ANSI_ESCAPE_SEQUENCE("K")
//@}
#endif
diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index b399a75d66..66412324e4 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -8,101 +8,107 @@
*
* \section Sec_ChangeLogXXXXXX Version XXXXXX
* New:
- * - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously
- * not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
- * - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c
- * - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number
- * - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application
- * handling of USB Start of Frame events while in USB Host mode
- * - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the
- * Print Host Class driver
- * - Added class specific descriptor alternative struct type defines with standard USB-IF element naming
- * - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory
- * - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett)
- * - Added board hardware driver support for the Kernel Concepts USBFOO development board
- * - Added board hardware driver support for the Linnix UDIP development board
- * - Added board hardware driver support for the Busware BUI development board
- * - Added board hardware driver support for the Arduino Uno development board
- * - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann)
- * - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team)
- * - Added board hardware driver support for the Maximus board (thanks to the PSGroove team)
- * - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
- * - Added board hardware driver support for the Adafruit U4 breakout board
- * - Added default test tone generation mode to the Device mode AudioInput demos
- * - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
- * tasks for each driver is called
- * - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
- * - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
- * - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the
- * CDC class bootloader
- * - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light)
+ * - Core:
+ * - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously
+ * not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
+ * - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c
+ * - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number
+ * - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application
+ * handling of USB Start of Frame events while in USB Host mode
+ * - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the
+ * Print Host Class driver
+ * - Added class specific descriptor alternative struct type defines with standard USB-IF element naming
+ * - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory
+ * - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett)
+ * - Added board hardware driver support for the Kernel Concepts USBFOO development board
+ * - Added board hardware driver support for the Linnix UDIP development board
+ * - Added board hardware driver support for the Busware BUI development board
+ * - Added board hardware driver support for the Arduino Uno development board
+ * - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann)
+ * - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team)
+ * - Added board hardware driver support for the Maximus board (thanks to the PSGroove team)
+ * - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
+ * - Added board hardware driver support for the Adafruit U4 breakout board
+ * - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
+ * tasks for each driver is called
+ * - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda)
+ * - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
+ * - Library Applications:
+ * - Added default test tone generation mode to the Device mode AudioInput demos
+ * - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the
+ * CDC class bootloader
+ * - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light)
*
* Changed:
- * - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions
- * depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing
- * with basic code
- * - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints
- * - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant
- * SCSI_Codes.h file as these values are part of the MassStorage Class Driver
- * - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel
- * does not exist on these chips (thanks to Marco)
- * - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data
- * transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will
- * not break communications with the host by exceeding the maximum control request stage timeout period
- * - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove
- * the need for extra casting inside the callback (thanks to Jonathan Kollasch)
- * - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode
- * - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible
- * to free up the Start of Frame flag for interrupt use in the user application
- * - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
- * - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode
- * - Renamed and moved class driver common constant definitions to make the naming scheme more uniform
- * - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive
- * - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices
- * - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another
- * - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for
- * the given endpoint
- * - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present)
- * - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included
- * - All LowLevel demos changed to use the constants and types defined in the USB class drivers
- * - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer
- * - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called
- * - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times
- * - Changed ClassDriver MIDI demos to process all incomming events in a loop until the bank becomes empty rather than one at a time
- * - Changed LowLevel MIDI demos to only clear the incomming event bank once it has become empty to support packed event packets
- * - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library
- * request handlers, not afterwards
+ * - Core:
+ * - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions
+ * depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing
+ * with basic code
+ * - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove
+ * the need for extra casting inside the callback (thanks to Jonathan Kollasch)
+ * - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode
+ * - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode
+ * - Renamed and moved class driver common constant definitions to make the naming scheme more uniform
+ * - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another
+ * - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for
+ * the given endpoint
+ * - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present)
+ * - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included
+ * - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called
+ * - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library
+ * request handlers, not afterwards
+ * - Library Applications:
+ * - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints
+ * - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant
+ * SCSI_Codes.h file as these values are part of the MassStorage Class Driver
+ * - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel
+ * does not exist on these chips (thanks to Marco)
+ * - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data
+ * transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will
+ * not break communications with the host by exceeding the maximum control request stage timeout period
+ * - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible
+ * to free up the Start of Frame flag for interrupt use in the user application
+ * - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
+ * - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive
+ * - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices
+ * - All LowLevel demos changed to use the constants and types defined in the USB class drivers
+ * - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer
+ * - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times
+ * - Changed ClassDriver MIDI demos to process all incomming events in a loop until the bank becomes empty rather than one at a time
+ * - Changed LowLevel MIDI demos to only clear the incomming event bank once it has become empty to support packed event packets
*
* Fixed:
- * - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
- * within the supplied report of a multiple report HID device
- * - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to
- * missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger)
- * - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped
- * in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger)
- * - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control
- * request handler
- * - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value
- * - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev)
- * - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts
- * - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2
- * - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
- * - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
- * - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
- * - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
- * - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev)
- * - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver
- * - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set
- * - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used
- * - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called
- * - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules
- * - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings
- * - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured
- * - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green)
- * - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full
- * - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor
- * - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics)
- * - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode
+ * - Core:
+ * - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
+ * within the supplied report of a multiple report HID device
+ * - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped
+ * in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger)
+ * - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev)
+ * - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts
+ * - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
+ * - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
+ * - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
+ * - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
+ * - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver
+ * - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set
+ * - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called
+ * - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings
+ * - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured
+ * - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green)
+ * - Library Applications:
+ * - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to
+ * missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger)
+ * - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control
+ * request handler
+ * - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value
+ * - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2
+ * - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev)
+ * - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used
+ * - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules
+ * - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full
+ * - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor
+ * - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics)
+ * - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode
*
* \section Sec_ChangeLog100807 Version 100807
* New: