From 8f981b5f38b22f1a49fdec9ff5d09ac982cd71f3 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 17 Nov 2010 06:34:04 +0000 Subject: [PATCH] Better documentation for the ANSI terminal escape codes header. Organise the current version changelog better to group core and non-core changes together. --- LUFA/Drivers/Misc/TerminalCodes.h | 114 ++++++++++-------- LUFA/ManPages/ChangeLog.txt | 188 +++++++++++++++--------------- 2 files changed, 162 insertions(+), 140 deletions(-) diff --git a/LUFA/Drivers/Misc/TerminalCodes.h b/LUFA/Drivers/Misc/TerminalCodes.h index 25037cc919..f6673bc81b 100644 --- a/LUFA/Drivers/Misc/TerminalCodes.h +++ b/LUFA/Drivers/Misc/TerminalCodes.h @@ -63,143 +63,159 @@ /* Public Interface - May be used in end-application: */ /* Macros: */ #if !defined(DISABLE_TERMINAL_CODES) - /** Creates an ANSI escape sequence with the payload specified by "c". + /** Creates an ANSI escape sequence with the specified payload. * - * \param[in] c Payload to encode as an ANSI escape sequence, a ESC_* mask. + * \param[in] EscapeSeq Payload to encode as an ANSI escape sequence, a ESC_* mask. */ - #define ANSI_ESCAPE_SEQUENCE(c) "\33[" c + #define ANSI_ESCAPE_SEQUENCE(EscapeSeq) "\33[" EscapeSeq #else - #define ANSI_ESCAPE_SEQUENCE(c) + #define ANSI_ESCAPE_SEQUENCE(EscapeSeq) #endif /** \name Text Display Modifier Escape Sequences */ //@{ /** Turns on bold so that any following text is printed to the terminal in bold. */ - #define ESC_BOLD_ON ANSI_ESCAPE_SEQUENCE("1m") + #define ESC_BOLD_ON ANSI_ESCAPE_SEQUENCE("1m") /** Turns on italics so that any following text is printed to the terminal in italics. */ - #define ESC_ITALICS_ON ANSI_ESCAPE_SEQUENCE("3m") + #define ESC_ITALICS_ON ANSI_ESCAPE_SEQUENCE("3m") /** Turns on underline so that any following text is printed to the terminal underlined. */ - #define ESC_UNDERLINE_ON ANSI_ESCAPE_SEQUENCE("4m") + #define ESC_UNDERLINE_ON ANSI_ESCAPE_SEQUENCE("4m") /** Turns on inverse so that any following text is printed to the terminal in inverted colours. */ - #define ESC_INVERSE_ON ANSI_ESCAPE_SEQUENCE("7m") + #define ESC_INVERSE_ON ANSI_ESCAPE_SEQUENCE("7m") /** Turns on strikethrough so that any following text is printed to the terminal with a line through the * center. */ - #define ESC_STRIKETHROUGH_ON ANSI_ESCAPE_SEQUENCE("9m") + #define ESC_STRIKETHROUGH_ON ANSI_ESCAPE_SEQUENCE("9m") /** Turns off bold so that any following text is printed to the terminal in non bold. */ - #define ESC_BOLD_OFF ANSI_ESCAPE_SEQUENCE("22m") + #define ESC_BOLD_OFF ANSI_ESCAPE_SEQUENCE("22m") /** Turns off italics so that any following text is printed to the terminal in non italics. */ - #define ESC_ITALICS_OFF ANSI_ESCAPE_SEQUENCE("23m") + #define ESC_ITALICS_OFF ANSI_ESCAPE_SEQUENCE("23m") /** Turns off underline so that any following text is printed to the terminal non underlined. */ - #define ESC_UNDERLINE_OFF ANSI_ESCAPE_SEQUENCE("24m") + #define ESC_UNDERLINE_OFF ANSI_ESCAPE_SEQUENCE("24m") /** Turns off inverse so that any following text is printed to the terminal in non inverted colours. */ - #define ESC_INVERSE_OFF ANSI_ESCAPE_SEQUENCE("27m") + #define ESC_INVERSE_OFF ANSI_ESCAPE_SEQUENCE("27m") /** Turns off strikethrough so that any following text is printed to the terminal without a line through * the center. */ - #define ESC_STRIKETHROUGH_OFF ANSI_ESCAPE_SEQUENCE("29m") + #define ESC_STRIKETHROUGH_OFF ANSI_ESCAPE_SEQUENCE("29m") //@} /** \name Text Colour Control Sequences */ //@{ /** Sets the foreground (text) colour to black. */ - #define ESC_FG_BLACK ANSI_ESCAPE_SEQUENCE("30m") + #define ESC_FG_BLACK ANSI_ESCAPE_SEQUENCE("30m") /** Sets the foreground (text) colour to red. */ - #define ESC_FG_RED ANSI_ESCAPE_SEQUENCE("31m") + #define ESC_FG_RED ANSI_ESCAPE_SEQUENCE("31m") /** Sets the foreground (text) colour to green. */ - #define ESC_FG_GREEN ANSI_ESCAPE_SEQUENCE("32m") + #define ESC_FG_GREEN ANSI_ESCAPE_SEQUENCE("32m") /** Sets the foreground (text) colour to yellow. */ - #define ESC_FG_YELLOW ANSI_ESCAPE_SEQUENCE("33m") + #define ESC_FG_YELLOW ANSI_ESCAPE_SEQUENCE("33m") /** Sets the foreground (text) colour to blue. */ - #define ESC_FG_BLUE ANSI_ESCAPE_SEQUENCE("34m") + #define ESC_FG_BLUE ANSI_ESCAPE_SEQUENCE("34m") /** Sets the foreground (text) colour to magenta. */ - #define ESC_FG_MAGENTA ANSI_ESCAPE_SEQUENCE("35m") + #define ESC_FG_MAGENTA ANSI_ESCAPE_SEQUENCE("35m") /** Sets the foreground (text) colour to cyan. */ - #define ESC_FG_CYAN ANSI_ESCAPE_SEQUENCE("36m") + #define ESC_FG_CYAN ANSI_ESCAPE_SEQUENCE("36m") /** Sets the foreground (text) colour to white. */ - #define ESC_FG_WHITE ANSI_ESCAPE_SEQUENCE("37m") + #define ESC_FG_WHITE ANSI_ESCAPE_SEQUENCE("37m") /** Sets the foreground (text) colour to the terminal's default. */ - #define ESC_FG_DEFAULT ANSI_ESCAPE_SEQUENCE("39m") + #define ESC_FG_DEFAULT ANSI_ESCAPE_SEQUENCE("39m") /** Sets the text background colour to black. */ - #define ESC_BG_BLACK ANSI_ESCAPE_SEQUENCE("40m") + #define ESC_BG_BLACK ANSI_ESCAPE_SEQUENCE("40m") /** Sets the text background colour to red. */ - #define ESC_BG_RED ANSI_ESCAPE_SEQUENCE("41m") + #define ESC_BG_RED ANSI_ESCAPE_SEQUENCE("41m") /** Sets the text background colour to green. */ - #define ESC_BG_GREEN ANSI_ESCAPE_SEQUENCE("42m") + #define ESC_BG_GREEN ANSI_ESCAPE_SEQUENCE("42m") /** Sets the text background colour to yellow. */ - #define ESC_BG_YELLOW ANSI_ESCAPE_SEQUENCE("43m") + #define ESC_BG_YELLOW ANSI_ESCAPE_SEQUENCE("43m") /** Sets the text background colour to blue. */ - #define ESC_BG_BLUE ANSI_ESCAPE_SEQUENCE("44m") + #define ESC_BG_BLUE ANSI_ESCAPE_SEQUENCE("44m") /** Sets the text background colour to magenta. */ - #define ESC_BG_MAGENTA ANSI_ESCAPE_SEQUENCE("45m") + #define ESC_BG_MAGENTA ANSI_ESCAPE_SEQUENCE("45m") /** Sets the text background colour to cyan. */ - #define ESC_BG_CYAN ANSI_ESCAPE_SEQUENCE("46m") + #define ESC_BG_CYAN ANSI_ESCAPE_SEQUENCE("46m") /** Sets the text background colour to white. */ - #define ESC_BG_WHITE ANSI_ESCAPE_SEQUENCE("47m") + #define ESC_BG_WHITE ANSI_ESCAPE_SEQUENCE("47m") /** Sets the text background colour to the terminal's default. */ - #define ESC_BG_DEFAULT ANSI_ESCAPE_SEQUENCE("49m") + #define ESC_BG_DEFAULT ANSI_ESCAPE_SEQUENCE("49m") //@} /** \name Cursor Positioning Control Sequences */ //@{ - /** Sets the cursor position to the given line and column. */ - #define ESC_CURSOR_POS(L, C) ANSI_ESCAPE_SEQUENCE(#L ";" #C "H") + /** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */ + #define ESC_CURSOR_POS_SAVE ANSI_ESCAPE_SEQUENCE("s") - /** Moves the cursor up the given number of lines. */ - #define ESC_CURSOR_UP(L) ANSI_ESCAPE_SEQUENCE(#L "A") + /** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */ + #define ESC_CURSOR_POS_RESTORE ANSI_ESCAPE_SEQUENCE("u") - /** Moves the cursor down the given number of lines. */ - #define ESC_CURSOR_DOWN(L) ANSI_ESCAPE_SEQUENCE(#L "B") + /** Sets the cursor position to the given line and column. + * + * \param[in] Line Line number to position the cursor at + * \param[in] Column Column number to position the cursor at + */ + #define ESC_CURSOR_POS(Line, Column) ANSI_ESCAPE_SEQUENCE(#Line ";" #Column "H") - /** Moves the cursor to the right the given number of columns. */ - #define ESC_CURSOR_FORWARD(C) ANSI_ESCAPE_SEQUENCE(#C "C") + /** Moves the cursor up the given number of lines. + * + * \param[in] Lines Number of lines to move the cursor position + */ + #define ESC_CURSOR_UP(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "A") - /** Moves the cursor to the left the given number of columns. */ - #define ESC_CURSOR_BACKWARD(C) ANSI_ESCAPE_SEQUENCE(#C "D") + /** Moves the cursor down the given number of lines. + * + * \param[in] Lines Number of lines to move the cursor position + */ + #define ESC_CURSOR_DOWN(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "B") - /** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */ - #define ESC_CURSOR_POS_SAVE ANSI_ESCAPE_SEQUENCE("s") + /** Moves the cursor to the right the given number of columns. + * + * \param[in] Columns Number of columns to move the cursor position + */ + #define ESC_CURSOR_FORWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "C") - /** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */ - #define ESC_CURSOR_POS_RESTORE ANSI_ESCAPE_SEQUENCE("u") + /** Moves the cursor to the left the given number of columns. + * + * \param[in] Columns Number of columns to move the cursor position + */ + #define ESC_CURSOR_BACKWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "D") //@} /** \name Miscellaneous Control Sequences */ //@{ /** Resets any escape sequence modifiers back to their defaults. */ - #define ESC_RESET ANSI_ESCAPE_SEQUENCE("0m") + #define ESC_RESET ANSI_ESCAPE_SEQUENCE("0m") /** Erases the entire display, returning the cursor to the top left. */ - #define ESC_ERASE_DISPLAY ANSI_ESCAPE_SEQUENCE("2J") + #define ESC_ERASE_DISPLAY ANSI_ESCAPE_SEQUENCE("2J") /** Erases the current line, returning the cursor to the far left. */ - #define ESC_ERASE_LINE ANSI_ESCAPE_SEQUENCE("K") + #define ESC_ERASE_LINE ANSI_ESCAPE_SEQUENCE("K") //@} #endif diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt index b399a75d66..66412324e4 100644 --- a/LUFA/ManPages/ChangeLog.txt +++ b/LUFA/ManPages/ChangeLog.txt @@ -8,101 +8,107 @@ * * \section Sec_ChangeLogXXXXXX Version XXXXXX * New: - * - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously - * not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger) - * - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c - * - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number - * - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application - * handling of USB Start of Frame events while in USB Host mode - * - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the - * Print Host Class driver - * - Added class specific descriptor alternative struct type defines with standard USB-IF element naming - * - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory - * - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett) - * - Added board hardware driver support for the Kernel Concepts USBFOO development board - * - Added board hardware driver support for the Linnix UDIP development board - * - Added board hardware driver support for the Busware BUI development board - * - Added board hardware driver support for the Arduino Uno development board - * - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann) - * - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team) - * - Added board hardware driver support for the Maximus board (thanks to the PSGroove team) - * - Added board hardware driver support for the Minimus board (thanks to the PSGroove team) - * - Added board hardware driver support for the Adafruit U4 breakout board - * - Added default test tone generation mode to the Device mode AudioInput demos - * - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management - * tasks for each driver is called - * - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda) - * - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions - * - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the - * CDC class bootloader - * - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light) + * - Core: + * - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously + * not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger) + * - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c + * - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number + * - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application + * handling of USB Start of Frame events while in USB Host mode + * - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the + * Print Host Class driver + * - Added class specific descriptor alternative struct type defines with standard USB-IF element naming + * - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory + * - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett) + * - Added board hardware driver support for the Kernel Concepts USBFOO development board + * - Added board hardware driver support for the Linnix UDIP development board + * - Added board hardware driver support for the Busware BUI development board + * - Added board hardware driver support for the Arduino Uno development board + * - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann) + * - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team) + * - Added board hardware driver support for the Maximus board (thanks to the PSGroove team) + * - Added board hardware driver support for the Minimus board (thanks to the PSGroove team) + * - Added board hardware driver support for the Adafruit U4 breakout board + * - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management + * tasks for each driver is called + * - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda) + * - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions + * - Library Applications: + * - Added default test tone generation mode to the Device mode AudioInput demos + * - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the + * CDC class bootloader + * - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light) * * Changed: - * - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions - * depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing - * with basic code - * - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints - * - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant - * SCSI_Codes.h file as these values are part of the MassStorage Class Driver - * - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel - * does not exist on these chips (thanks to Marco) - * - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data - * transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will - * not break communications with the host by exceeding the maximum control request stage timeout period - * - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove - * the need for extra casting inside the callback (thanks to Jonathan Kollasch) - * - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode - * - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible - * to free up the Start of Frame flag for interrupt use in the user application - * - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany) - * - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode - * - Renamed and moved class driver common constant definitions to make the naming scheme more uniform - * - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive - * - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices - * - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another - * - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for - * the given endpoint - * - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present) - * - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included - * - All LowLevel demos changed to use the constants and types defined in the USB class drivers - * - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer - * - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called - * - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times - * - Changed ClassDriver MIDI demos to process all incomming events in a loop until the bank becomes empty rather than one at a time - * - Changed LowLevel MIDI demos to only clear the incomming event bank once it has become empty to support packed event packets - * - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library - * request handlers, not afterwards + * - Core: + * - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions + * depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing + * with basic code + * - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove + * the need for extra casting inside the callback (thanks to Jonathan Kollasch) + * - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode + * - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode + * - Renamed and moved class driver common constant definitions to make the naming scheme more uniform + * - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another + * - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for + * the given endpoint + * - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present) + * - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included + * - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called + * - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library + * request handlers, not afterwards + * - Library Applications: + * - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints + * - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant + * SCSI_Codes.h file as these values are part of the MassStorage Class Driver + * - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel + * does not exist on these chips (thanks to Marco) + * - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data + * transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will + * not break communications with the host by exceeding the maximum control request stage timeout period + * - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible + * to free up the Start of Frame flag for interrupt use in the user application + * - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany) + * - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive + * - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices + * - All LowLevel demos changed to use the constants and types defined in the USB class drivers + * - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer + * - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times + * - Changed ClassDriver MIDI demos to process all incomming events in a loop until the bank becomes empty rather than one at a time + * - Changed LowLevel MIDI demos to only clear the incomming event bank once it has become empty to support packed event packets * * Fixed: - * - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist - * within the supplied report of a multiple report HID device - * - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to - * missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger) - * - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped - * in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger) - * - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control - * request handler - * - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value - * - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev) - * - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts - * - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2 - * - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe - * - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode - * - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests - * - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target - * - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev) - * - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver - * - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set - * - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used - * - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called - * - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules - * - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings - * - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured - * - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green) - * - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full - * - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor - * - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics) - * - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode + * - Core: + * - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist + * within the supplied report of a multiple report HID device + * - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped + * in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger) + * - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev) + * - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts + * - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe + * - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode + * - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests + * - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target + * - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver + * - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set + * - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called + * - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings + * - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured + * - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green) + * - Library Applications: + * - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to + * missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger) + * - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control + * request handler + * - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value + * - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2 + * - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev) + * - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used + * - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules + * - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full + * - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor + * - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics) + * - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode * * \section Sec_ChangeLog100807 Version 100807 * New: