diff --git a/Demos/BluetoothHost/BluetoothACLPackets.c b/Demos/BluetoothHost/BluetoothACLPackets.c deleted file mode 100644 index c79e56050b..0000000000 --- a/Demos/BluetoothHost/BluetoothACLPackets.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#define INCLUDE_FROM_BLUETOOTH_ACLPACKETS_C -#include "BluetoothACLPackets.h" - -void Bluetooth_ProcessACLPackets(void) -{ - Bluetooth_ACL_Header_t ACLPacketHeader; - - Pipe_SelectPipe(BLUETOOTH_DATA_IN_PIPE); - Pipe_SetToken(PIPE_TOKEN_IN); - Pipe_Unfreeze(); - - if (!(Pipe_ReadWriteAllowed())) - { - Pipe_Freeze(); - return; - } - - Pipe_Read_Stream_LE(&ACLPacketHeader, sizeof(ACLPacketHeader)); - - Bluetooth_DataPacket_Header_t DataHeader; - Pipe_Read_Stream_LE(&DataHeader, sizeof(DataHeader)); - - BT_DEBUG("(ACL) Packet Received", NULL); - BT_DEBUG("(ACL) -- Connection Handle: 0x%04X", ACLPacketHeader.ConnectionHandle); - BT_DEBUG("(ACL) -- Data Length: 0x%04X", ACLPacketHeader.DataLength); - BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", DataHeader.DestinationChannel); - BT_DEBUG("(ACL) -- Payload Length: 0x%04X", DataHeader.PayloadLength); - - if (DataHeader.DestinationChannel == BLUETOOTH_CHANNEL_SIGNALING) - { - Bluetooth_SignalCommand_Header_t SignalCommandHeader; - Pipe_Read_Stream_LE(&SignalCommandHeader, sizeof(SignalCommandHeader)); - - switch (SignalCommandHeader.Code) - { - case BLUETOOTH_SIGNAL_CONNECTION_REQUEST: - Bluetooth_ProcessSignalPacket_ConnectionRequest(&ACLPacketHeader, &DataHeader, &SignalCommandHeader); - break; - case BLUETOOTH_SIGNAL_CONFIGURATION_REQUEST: - Bluetooth_ProcessSignalPacket_ConfigurationRequest(&ACLPacketHeader, &DataHeader, &SignalCommandHeader); - break; - default: - BT_DEBUG("(ACL) >> Unknown Signalling Command 0x%02X", SignalCommandHeader.Code); - - Pipe_Discard_Stream(ACLPacketHeader.DataLength); - Pipe_ClearCurrentBank(); - Pipe_Freeze(); - break; - } - } - else - { - uint8_t DataPayload[DataHeader.PayloadLength]; - Pipe_Read_Stream_LE(&DataPayload, sizeof(DataPayload)); - DataHeader.PayloadLength = 0; - - BT_DEBUG("(ACL) -- Data Payload: ", NULL); - for (uint16_t B = 0; B < sizeof(DataPayload); B++) - printf("0x%02X ", DataPayload[B]); - BT_DEBUG("", NULL); - - Pipe_Discard_Stream(ACLPacketHeader.DataLength); - Pipe_ClearCurrentBank(); - Pipe_Freeze(); - } -} - -static inline void Bluetooth_ProcessSignalPacket_ConnectionRequest(Bluetooth_ACL_Header_t* ACLPacketHeader, - Bluetooth_DataPacket_Header_t* DataHeader, - Bluetooth_SignalCommand_Header_t* SignalCommandHeader) -{ - Bluetooth_SignalCommand_ConnectionRequest_t ConnectionRequest; - - Pipe_Read_Stream_LE(&ConnectionRequest, sizeof(ConnectionRequest)); - - BT_DEBUG("(ACL) >> L2CAP Connection Request", NULL); - BT_DEBUG("(ACL) -- PSM: 0x%04X", ConnectionRequest.PSM); - BT_DEBUG("(ACL) -- Source Channel: 0x%04X", ConnectionRequest.SourceChannel); - - Pipe_ClearCurrentBank(); - Pipe_Freeze(); - Pipe_SelectPipe(BLUETOOTH_DATA_OUT_PIPE); - Pipe_SetToken(PIPE_TOKEN_OUT); - Pipe_Unfreeze(); - - Bluetooth_SignalCommand_ConnectionResponse_t ConnectionResponse; - - ACLPacketHeader->DataLength = sizeof(*DataHeader) + sizeof(*SignalCommandHeader) + sizeof(ConnectionResponse); - DataHeader->PayloadLength = sizeof(*SignalCommandHeader) + sizeof(ConnectionResponse); - DataHeader->DestinationChannel = BLUETOOTH_CHANNEL_SIGNALING; - SignalCommandHeader->Code = BLUETOOTH_SIGNAL_CONNECTION_RESPONSE; - SignalCommandHeader->Length = sizeof(ConnectionResponse); - - Bluetooth_Channel_t* ChannelData = Bluetooth_InitChannelData(ConnectionRequest.SourceChannel, ConnectionRequest.PSM); - - ConnectionResponse.Result = (ChannelData == NULL) ? BLUETOOTH_CONNECTION_REFUSED_RESOURCES : - BLUETOOTH_CONNECTION_SUCCESSFUL; - ConnectionResponse.DestinationChannel = ChannelData->LocalNumber; - ConnectionResponse.SourceChannel = ChannelData->RemoteNumber; - ConnectionResponse.Status = 0x00; - - Pipe_Write_Stream_LE(ACLPacketHeader, sizeof(*ACLPacketHeader)); - Pipe_Write_Stream_LE(DataHeader, sizeof(*DataHeader)); - Pipe_Write_Stream_LE(SignalCommandHeader, sizeof(*SignalCommandHeader)); - Pipe_Write_Stream_LE(&ConnectionResponse, sizeof(ConnectionResponse)); - - Pipe_ClearCurrentBank(); - Pipe_Freeze(); - - BT_DEBUG("(ACL) Packet Sent", NULL); - BT_DEBUG("(ACL) -- Connection Handle: 0x%04X", ACLPacketHeader->ConnectionHandle); - BT_DEBUG("(ACL) -- Data Length: 0x%04X", ACLPacketHeader->DataLength); - BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", DataHeader->DestinationChannel); - BT_DEBUG("(ACL) -- Payload Length: 0x%04X", DataHeader->PayloadLength); - BT_DEBUG("(ACL) >> L2CAP Connection Response", NULL); - BT_DEBUG("(ACL) -- Source Channel: 0x%04X", ConnectionResponse.SourceChannel); - BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel); -} - -static inline void Bluetooth_ProcessSignalPacket_ConfigurationRequest(Bluetooth_ACL_Header_t* ACLPacketHeader, - Bluetooth_DataPacket_Header_t* DataHeader, - Bluetooth_SignalCommand_Header_t* SignalCommandHeader) -{ - Bluetooth_SignalCommand_ConfigurationRequest_t ConfigurationRequest; - - Pipe_Read_Stream_LE(&ConfigurationRequest, sizeof(ConfigurationRequest)); - - BT_DEBUG("(ACL) >> L2CAP Configuration Request", NULL); - BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", ConfigurationRequest.DestinationChannel); - - Pipe_ClearCurrentBank(); - Pipe_Freeze(); - Pipe_SelectPipe(BLUETOOTH_DATA_OUT_PIPE); - Pipe_SetToken(PIPE_TOKEN_OUT); - Pipe_Unfreeze(); - - Bluetooth_SignalCommand_ConfigurationResponse_t ConfigurationResponse; - - ACLPacketHeader->DataLength = sizeof(*DataHeader) + sizeof(*SignalCommandHeader) + sizeof(ConfigurationResponse); - DataHeader->PayloadLength = sizeof(*SignalCommandHeader) + sizeof(ConfigurationResponse); - DataHeader->DestinationChannel = BLUETOOTH_CHANNEL_SIGNALING; - SignalCommandHeader->Code = BLUETOOTH_SIGNAL_CONFIGURATION_RESPONSE; - SignalCommandHeader->Length = sizeof(ConfigurationResponse); - - Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConfigurationRequest.DestinationChannel, CHANNEL_LOOKUP_BY_DESTINATION); - - if (ChannelData != NULL) - ChannelData->State = Channel_Open; - - // TODO: Add channel config data to the tail of ConfigurationResponse - - ConfigurationResponse.SourceChannel = ChannelData->RemoteNumber; - ConfigurationResponse.Flags = 0x00; - ConfigurationResponse.Result = (ChannelData != NULL) ? BLUETOOTH_CONFIGURATION_SUCCESSFUL : BLUETOOTH_CONFIGURATION_REJECTED; - - Pipe_Write_Stream_LE(ACLPacketHeader, sizeof(*ACLPacketHeader)); - Pipe_Write_Stream_LE(DataHeader, sizeof(*DataHeader)); - Pipe_Write_Stream_LE(SignalCommandHeader, sizeof(*SignalCommandHeader)); - Pipe_Write_Stream_LE(&ConfigurationResponse, sizeof(ConfigurationResponse)); - - Pipe_ClearCurrentBank(); - Pipe_Freeze(); - - BT_DEBUG("(ACL) Packet Sent", NULL); - BT_DEBUG("(ACL) -- Connection Handle: 0x%04X", ACLPacketHeader->ConnectionHandle); - BT_DEBUG("(ACL) -- Data Length: 0x%04X", ACLPacketHeader->DataLength); - BT_DEBUG("(ACL) -- Destination Channel: 0x%04X", DataHeader->DestinationChannel); - BT_DEBUG("(ACL) -- Payload Length: 0x%04X", DataHeader->PayloadLength); - BT_DEBUG("(ACL) >> L2CAP Configuration Response", NULL); -} diff --git a/Demos/BluetoothHost/BluetoothACLPackets.h b/Demos/BluetoothHost/BluetoothACLPackets.h deleted file mode 100644 index 20c6cca5bb..0000000000 --- a/Demos/BluetoothHost/BluetoothACLPackets.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#ifndef _BLUETOOTH_ACLPACKETS_ -#define _BLUETOOTH_ACLPACKETS_ - - /* Includes: */ - #include - #include - #include - - #include - - #include "BluetoothStack.h" - - /* Macros: */ - #define BLUETOOTH_CHANNEL_SIGNALING 0x0001 - #define BLUETOOTH_CHANNEL_CONNECTIONLESS 0x0002 - - #define BLUETOOTH_SIGNAL_CONNECTION_REQUEST 0x02 - #define BLUETOOTH_SIGNAL_CONNECTION_RESPONSE 0x03 - #define BLUETOOTH_SIGNAL_CONFIGURATION_REQUEST 0x04 - #define BLUETOOTH_SIGNAL_CONFIGURATION_RESPONSE 0x05 - - #define BLUETOOTH_CONNECTION_SUCCESSFUL 0x0000 - #define BLUETOOTH_CONNECTION_REFUSED_RESOURCES 0x0004 - - #define BLUETOOTH_CONFIGURATION_SUCCESSFUL 0x0000 - #define BLUETOOTH_CONFIGURATION_REJECTED 0x0002 - #define BLUETOOTH_CONFIGURATION_UNKNOWNOPTIONS 0x0003 - - - /* Type Defines: */ - typedef struct - { - uint16_t ConnectionHandle; - uint16_t DataLength; - } Bluetooth_ACL_Header_t; - - typedef struct - { - uint16_t PayloadLength; - uint16_t DestinationChannel; - } Bluetooth_DataPacket_Header_t; - - typedef struct - { - uint8_t Code; - uint8_t Identifier; - uint16_t Length; - } Bluetooth_SignalCommand_Header_t; - - typedef struct - { - uint16_t PSM; - uint16_t SourceChannel; - } Bluetooth_SignalCommand_ConnectionRequest_t; - - typedef struct - { - uint16_t DestinationChannel; - uint16_t SourceChannel; - uint16_t Result; - uint16_t Status; - } Bluetooth_SignalCommand_ConnectionResponse_t; - - typedef struct - { - uint16_t DestinationChannel; - uint16_t Flags; - uint8_t Options[]; - } Bluetooth_SignalCommand_ConfigurationRequest_t; - - typedef struct - { - uint16_t SourceChannel; - uint16_t Flags; - uint16_t Result; - uint8_t Config; - } Bluetooth_SignalCommand_ConfigurationResponse_t; - - /* Function Prototypes: */ - void Bluetooth_ProcessACLPackets(void); - - #if defined(INCLUDE_FROM_BLUETOOTH_ACLPACKETS_C) - static inline void Bluetooth_ProcessSignalPacket_ConnectionRequest(Bluetooth_ACL_Header_t* ACLPacketHeader, - Bluetooth_DataPacket_Header_t* DataHeader, - Bluetooth_SignalCommand_Header_t* SignalCommandHeader); - static inline void Bluetooth_ProcessSignalPacket_ConfigurationRequest(Bluetooth_ACL_Header_t* ACLPacketHeader, - Bluetooth_DataPacket_Header_t* DataHeader, - Bluetooth_SignalCommand_Header_t* SignalCommandHeader); - #endif - -#endif diff --git a/Demos/BluetoothHost/BluetoothClassCodes.h b/Demos/BluetoothHost/BluetoothClassCodes.h deleted file mode 100644 index 5bbd4ef955..0000000000 --- a/Demos/BluetoothHost/BluetoothClassCodes.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#ifndef _BLUETOOTH_CLASS_CODES_H_ -#define _BLUETOOTH_CLASS_CODES_H_ - - /* Macros: */ - #define DEVICE_CLASS_SERVICE_POSITIONING (1UL << 16) - #define DEVICE_CLASS_SERVICE_NETWORKING (1UL << 17) - #define DEVICE_CLASS_SERVICE_RENDERING (1UL << 18) - #define DEVICE_CLASS_SERVICE_CAPTURING (1UL << 19) - #define DEVICE_CLASS_SERVICE_OBJECTTRANSFER (1UL << 20) - #define DEVICE_CLASS_SERVICE_AUDIO (1UL << 21) - #define DEVICE_CLASS_SERVICE_TELEPHONY (1UL << 22) - #define DEVICE_CLASS_SERVICE_INFORMATION (1UL << 23) - - #define DEVICE_CLASS_MAJOR_MISC (0x00 << 8) - #define DEVICE_CLASS_MAJOR_COMPUTER (0x01 << 8) - #define DEVICE_CLASS_MAJOR_PHONE (0x02 << 8) - #define DEVICE_CLASS_MAJOR_LAN (0x03 << 8) - #define DEVICE_CLASS_MAJOR_AUDIOVIDEO (0x04 << 8) - #define DEVICE_CLASS_MAJOR_PERIPHERAL (0x05 << 8) - #define DEVICE_CLASS_MAJOR_IMAGING (0x06 << 8) - #define DEVICE_CLASS_MAJOR_UNCLASSIFIED (0x1F << 8) - - #define DEVICE_CLASS_MINOR_COMPUTER_UNCATEGORIZED (0x00 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_DESKTOP (0x01 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_SERVER (0x02 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_LAPTOP (0x03 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_HANDHELD (0x04 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_PALM (0x05 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_WEARABLE (0x06 << 2) - - #define DEVICE_CLASS_MINOR_PHONE_UNCATEGORIZED (0x00 << 2) - #define DEVICE_CLASS_MINOR_PHONE_CELLULAR (0x01 << 2) - #define DEVICE_CLASS_MINOR_PHONE_CORDLESS (0x02 << 2) - #define DEVICE_CLASS_MINOR_PHONE_SMARTPHONE (0x03 << 2) - #define DEVICE_CLASS_MINOR_PHONE_WIREDMODEM (0x04 << 2) - #define DEVICE_CLASS_MINOR_PHONE_ISDN (0x05 << 2) - - #define DEVICE_CLASS_MINOR_LAN_FULLY_AVAILABLE (0x00 << 5) - #define DEVICE_CLASS_MINOR_LAN_1_TO_17_PC_UTILIZED (0x01 << 5) - #define DEVICE_CLASS_MINOR_LAN_17_TO_33_PC_UTILIZED (0x02 << 5) - #define DEVICE_CLASS_MINOR_LAN_33_TO_50_PC_UTILIZED (0x03 << 5) - #define DEVICE_CLASS_MINOR_LAN_50_TO_67_PC_UTILIZED (0x04 << 5) - #define DEVICE_CLASS_MINOR_LAN_67_TO_83_PC_UTILIZED (0x05 << 5) - #define DEVICE_CLASS_MINOR_LAN_83_TO_99_PC_UTILIZED (0x06 << 5) - #define DEVICE_CLASS_MINOR_NO_SERVICE_AVAILABLE (0x07 << 5) - - #define DEVICE_CLASS_MINOR_AV_UNCATEGORIZED (0x00 << 2) - #define DEVICE_CLASS_MINOR_AV_HEADSET (0x01 << 2) - #define DEVICE_CLASS_MINOR_AV_HANDSFREE (0x02 << 2) - #define DEVICE_CLASS_MINOR_AV_MICROPHONE (0x04 << 2) - #define DEVICE_CLASS_MINOR_AV_LOUDSPEAKER (0x05 << 2) - #define DEVICE_CLASS_MINOR_AV_HEADPHONES (0x06 << 2) - #define DEVICE_CLASS_MINOR_AV_PORTABLE_AUDIO (0x07 << 2) - #define DEVICE_CLASS_MINOR_AV_CARAUDIO (0x08 << 2) - #define DEVICE_CLASS_MINOR_AV_SETTOP_BOX (0x09 << 2) - #define DEVICE_CLASS_MINOR_AV_HIFI (0x0A << 2) - #define DEVICE_CLASS_MINOR_AV_VCR (0x0B << 2) - #define DEVICE_CLASS_MINOR_AV_VIDEO_CAMERA (0x0C << 2) - #define DEVICE_CLASS_MINOR_AV_CAMCORDER (0x0D << 2) - #define DEVICE_CLASS_MINOR_AV_VIDEO_MONITOR (0x0E << 2) - #define DEVICE_CLASS_MINOR_AV_DISPLAY_AND_LOUDSPEAKER (0x0F << 2) - #define DEVICE_CLASS_MINOR_AV_VIDEO_CONFERENCING (0x10 << 2) - #define DEVICE_CLASS_MINOR_AV_GAMING_TOY (0x12 << 2) - - #define DEVICE_CLASS_MINOR_PERIPHERAL_KEYBOARD (0x01 << 6) - #define DEVICE_CLASS_MINOR_PERIPHERAL_POINTING (0x02 << 6) - #define DEVICE_CLASS_MINOR_PERIPHERAL_COMBO (0x03 << 6) - #define DEVICE_CLASS_MINOR_PERIPHERAL_UNCATEGORIZED (0x00 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_JOYSTICK (0x01 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_GAMEPAD (0x02 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_REMOTE_CONTROL (0x03 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_SENSING_DEVICE (0x04 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_DIGITIZER (0x05 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_CARD_READER (0x06 << 2) - - #define DEVICE_CLASS_MINOR_IMAGING_DISPLAY (1 << 4) - #define DEVICE_CLASS_MINOR_IMAGING_CAMERA (1 << 5) - #define DEVICE_CLASS_MINOR_IMAGING_SCANNER (1 << 6) - #define DEVICE_CLASS_MINOR_IMAGING_PRINTER (1 << 7) - -#endif diff --git a/Demos/BluetoothHost/BluetoothHCICommands.c b/Demos/BluetoothHost/BluetoothHCICommands.c deleted file mode 100644 index d529a34984..0000000000 --- a/Demos/BluetoothHost/BluetoothHCICommands.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "BluetoothHCICommands.h" - -static Bluetooth_HCICommand_Header_t HCICommandHeader; -static Bluetooth_HCIEvent_Header_t HCIEventHeader; - - uint8_t Bluetooth_HCIProcessingState; -static uint8_t Bluetooth_TempDeviceAddress[6]; - -static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint8_t ParamLength) -{ - uint8_t CommandBuffer[sizeof(HCICommandHeader) + HCICommandHeader.ParameterLength]; - - USB_HostRequest = (USB_Host_Request_Header_t) - { - bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_DEVICE), - bRequest: 0, - wValue: 0, - wIndex: 0, - wLength: sizeof(CommandBuffer) - }; - - memset(CommandBuffer, 0x00, sizeof(CommandBuffer)); - memcpy(CommandBuffer, &HCICommandHeader, sizeof(HCICommandHeader)); - - if (ParamLength) - memcpy(&CommandBuffer[sizeof(HCICommandHeader)], Parameters, ParamLength); - - return USB_Host_SendControlRequest(CommandBuffer); -} - -static bool Bluetooth_GetNextHCIEventHeader(void) -{ - Pipe_SelectPipe(BLUETOOTH_EVENTS_PIPE); - Pipe_Unfreeze(); - - if (!(Pipe_ReadWriteAllowed())) - return false; - - Pipe_Read_Stream_LE(&HCIEventHeader, sizeof(HCIEventHeader)); - - return true; -} - -static void Bluetooth_DiscardRemainingHCIEventParameters(void) -{ - Pipe_SelectPipe(BLUETOOTH_EVENTS_PIPE); - Pipe_Discard_Stream(HCIEventHeader.ParameterLength); - Pipe_ClearCurrentBank(); -} - -void Bluetooth_ProcessHCICommands(void) -{ - uint8_t ErrorCode; - - switch (Bluetooth_HCIProcessingState) - { - case Bluetooth_Init: - Pipe_SelectPipe(BLUETOOTH_EVENTS_PIPE); - Pipe_SetInfiniteINRequests(); - - memset(&Bluetooth_Connection, 0x00, sizeof(Bluetooth_Connection)); - - Bluetooth_HCIProcessingState = Bluetooth_Init_Reset; - break; - case Bluetooth_Init_Reset: - HCICommandHeader = (Bluetooth_HCICommand_Header_t) - { - OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_RESET}, - ParameterLength: 0, - }; - - BT_DEBUG("(HCI) Enter State: Bluetooth_Init_Reset", NULL); - - ErrorCode = Bluetooth_SendHCICommand(NULL, 0); - - do - { - while (!(Bluetooth_GetNextHCIEventHeader())); - Bluetooth_DiscardRemainingHCIEventParameters(); - } while (HCIEventHeader.EventCode != EVENT_COMMAND_COMPLETE); - - Bluetooth_HCIProcessingState = Bluetooth_Init_ReadBufferSize; - break; - case Bluetooth_Init_ReadBufferSize: - HCICommandHeader = (Bluetooth_HCICommand_Header_t) - { - OpCode: {OGF: OGF_CTRLR_INFORMATIONAL, OCF: OGF_CTRLR_INFORMATIONAL_READBUFFERSIZE}, - ParameterLength: 0, - }; - - BT_DEBUG("(HCI) Enter State: Bluetooth_Init_ReadBufferSize", NULL); - - ErrorCode = Bluetooth_SendHCICommand(NULL, 0); - - do - { - while (!(Bluetooth_GetNextHCIEventHeader())); - Bluetooth_DiscardRemainingHCIEventParameters(); - } while (HCIEventHeader.EventCode != EVENT_COMMAND_COMPLETE); - - Bluetooth_HCIProcessingState = Bluetooth_Init_SetEventMask; - break; - case Bluetooth_Init_SetEventMask: - HCICommandHeader = (Bluetooth_HCICommand_Header_t) - { - OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_SET_EVENT_MASK}, - ParameterLength: 8, - }; - - BT_DEBUG("(HCI) Enter State: Bluetooth_Init_SetEventMask", NULL); - - uint8_t EventMask[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; - ErrorCode = Bluetooth_SendHCICommand(&EventMask, 8); - - BT_DEBUG("(HCI) -- Event mask: 0x%02X%02X%02X%02X%02X%02X%02X%02X", EventMask[7], EventMask[6], EventMask[5], EventMask[4], - EventMask[3], EventMask[2], EventMask[1], EventMask[0]); - do - { - while (!(Bluetooth_GetNextHCIEventHeader())); - Bluetooth_DiscardRemainingHCIEventParameters(); - } while (HCIEventHeader.EventCode != EVENT_COMMAND_COMPLETE); - - - Bluetooth_HCIProcessingState = Bluetooth_Init_SetLocalName; - break; - case Bluetooth_Init_SetLocalName: - HCICommandHeader = (Bluetooth_HCICommand_Header_t) - { - OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_WRITE_LOCAL_NAME}, - ParameterLength: 248, - }; - - BT_DEBUG("(HCI) Enter State: Bluetooth_Init_SetLocalName", NULL); - BT_DEBUG("(HCI) -- Name: %s", Bluetooth_DeviceConfiguration.Name); - - ErrorCode = Bluetooth_SendHCICommand(Bluetooth_DeviceConfiguration.Name, strlen(Bluetooth_DeviceConfiguration.Name)); - - do - { - while (!(Bluetooth_GetNextHCIEventHeader())); - Bluetooth_DiscardRemainingHCIEventParameters(); - } while (HCIEventHeader.EventCode != EVENT_COMMAND_COMPLETE); - - Bluetooth_HCIProcessingState = Bluetooth_Init_SetDeviceClass; - break; - case Bluetooth_Init_SetDeviceClass: - HCICommandHeader = (Bluetooth_HCICommand_Header_t) - { - OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_WRITE_CLASS_OF_DEVICE}, - ParameterLength: 3, - }; - - BT_DEBUG("(HCI) Enter State: Bluetooth_Init_SetDeviceClass", NULL); - - ErrorCode = Bluetooth_SendHCICommand(&Bluetooth_DeviceConfiguration.Class, 3); - - do - { - while (!(Bluetooth_GetNextHCIEventHeader())); - Bluetooth_DiscardRemainingHCIEventParameters(); - } while (HCIEventHeader.EventCode != EVENT_COMMAND_COMPLETE); - - Bluetooth_HCIProcessingState = Bluetooth_Init_WriteScanEnable; - break; - case Bluetooth_Init_WriteScanEnable: - HCICommandHeader = (Bluetooth_HCICommand_Header_t) - { - OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_WRITE_SCAN_ENABLE}, - ParameterLength: 1, - }; - - BT_DEBUG("(HCI) Enter State: Bluetooth_Init_WriteScanEnable", NULL); - - uint8_t Interval = InquiryAndPageScans; - ErrorCode = Bluetooth_SendHCICommand(&Interval, 1); - - do - { - while (!(Bluetooth_GetNextHCIEventHeader())); - Bluetooth_DiscardRemainingHCIEventParameters(); - } while (HCIEventHeader.EventCode != EVENT_COMMAND_COMPLETE); - - Bluetooth_HCIProcessingState = Bluetooth_PrepareToProcessEvents; - break; - case Bluetooth_PrepareToProcessEvents: - BT_DEBUG("(HCI) Enter State: Bluetooth_ProcessEvents", NULL); - - Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents; - break; - case Bluetooth_ProcessEvents: - if (Bluetooth_GetNextHCIEventHeader()) - { - BT_DEBUG("(HCI) Event Code: 0x%02X", HCIEventHeader.EventCode); - - if (HCIEventHeader.EventCode == EVENT_COMMAND_STATUS) - { - Bluetooth_HCIEvent_CommandStatus_Header_t CommandStatusHeader; - - Pipe_Read_Stream_LE(&CommandStatusHeader, sizeof(CommandStatusHeader)); - HCIEventHeader.ParameterLength -= sizeof(CommandStatusHeader); - - BT_DEBUG("(HCI) >> Command status: 0x%02X", CommandStatusHeader.CommandStatus); - - if (CommandStatusHeader.CommandStatus) - Bluetooth_HCIProcessingState = Bluetooth_Init; - } - else if (HCIEventHeader.EventCode == EVENT_CONNECTION_REQUEST) - { - Bluetooth_HCIEvent_ConnectionRequest_Header_t ConnectionRequestParams; - - Pipe_Read_Stream_LE(&ConnectionRequestParams, sizeof(ConnectionRequestParams)); - HCIEventHeader.ParameterLength -= sizeof(ConnectionRequestParams); - - BT_DEBUG("(HCI) >> Connection Request from device %02X:%02X:%02X:%02X:%02X:%02X", - ConnectionRequestParams.RemoteAddress[5], ConnectionRequestParams.RemoteAddress[4], - ConnectionRequestParams.RemoteAddress[3], ConnectionRequestParams.RemoteAddress[2], - ConnectionRequestParams.RemoteAddress[1], ConnectionRequestParams.RemoteAddress[0]); - BT_DEBUG("(HCI) -- Device Class: 0x%02X%04X", ConnectionRequestParams.ClassOfDevice_Service, - ConnectionRequestParams.ClassOfDevice_MajorMinor); - BT_DEBUG("(HCI) -- Link Type: 0x%02x", ConnectionRequestParams.LinkType); - - memcpy(Bluetooth_TempDeviceAddress, ConnectionRequestParams.RemoteAddress, - sizeof(Bluetooth_TempDeviceAddress)); - - Bluetooth_HCIProcessingState = (Bluetooth_Connection.IsConnected) ? Bluetooth_Conn_RejectConnection : - Bluetooth_Conn_AcceptConnection; - } - else if (HCIEventHeader.EventCode == EVENT_DISCONNECTION_COMPLETE) - { - BT_DEBUG("(HCI) >> Disconnection from device complete.", NULL); - Bluetooth_HCIProcessingState = Bluetooth_Init; - } - else if (HCIEventHeader.EventCode == EVENT_CONNECTION_COMPLETE) - { - Bluetooth_HCIEvent_ConnectionComplete_Header_t ConnectionCompleteParams; - - Pipe_Read_Stream_LE(&ConnectionCompleteParams, sizeof(ConnectionCompleteParams)); - HCIEventHeader.ParameterLength -= sizeof(ConnectionCompleteParams); - - BT_DEBUG("(HCI) >> Connection to device complete.", NULL); - BT_DEBUG("(HCI) -- Status: %d", ConnectionCompleteParams.Status); - BT_DEBUG("(HCI) -- Handle: %d", ConnectionCompleteParams.ConnectionHandle); - - if (ConnectionCompleteParams.Status == 0x00) - { - memcpy(Bluetooth_Connection.DeviceAddress, ConnectionCompleteParams.RemoteAddress, - sizeof(Bluetooth_Connection.DeviceAddress)); - Bluetooth_Connection.ConnectionHandle = ConnectionCompleteParams.ConnectionHandle; - Bluetooth_Connection.IsConnected = true; - } - } - else if (HCIEventHeader.EventCode == EVENT_PIN_CODE_REQUEST) - { - Pipe_Read_Stream_LE(&Bluetooth_TempDeviceAddress, sizeof(Bluetooth_TempDeviceAddress)); - HCIEventHeader.ParameterLength -= sizeof(Bluetooth_TempDeviceAddress); - - BT_DEBUG("(HCI) >> PIN code Request from device %02X:%02X:%02X:%02X:%02X:%02X", - Bluetooth_TempDeviceAddress[5], Bluetooth_TempDeviceAddress[4], Bluetooth_TempDeviceAddress[3], - Bluetooth_TempDeviceAddress[2], Bluetooth_TempDeviceAddress[1], Bluetooth_TempDeviceAddress[0]); - - Bluetooth_HCIProcessingState = Bluetooth_Conn_SendPINCode; - } - - BT_DEBUG("(HCI) -- Unread Event Param Length: %d", HCIEventHeader.ParameterLength); - - Bluetooth_DiscardRemainingHCIEventParameters(); - } - - break; - case Bluetooth_Conn_AcceptConnection: - HCICommandHeader = (Bluetooth_HCICommand_Header_t) - { - OpCode: {OGF: OGF_LINK_CONTROL, OCF: OCF_LINK_CONTROL_ACCEPT_CONNECTION_REQUEST}, - ParameterLength: sizeof(Bluetooth_HCICommand_AcceptConnectionRequest_Params_t), - }; - - BT_DEBUG("(HCI) Enter State: Bluetooth_Conn_AcceptConnection", NULL); - - Bluetooth_HCICommand_AcceptConnectionRequest_Params_t AcceptConnectionParams; - - memcpy(AcceptConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress, - sizeof(Bluetooth_TempDeviceAddress)); - AcceptConnectionParams.SlaveRole = true; - - Bluetooth_SendHCICommand(&AcceptConnectionParams, sizeof(AcceptConnectionParams)); - - Bluetooth_HCIProcessingState = Bluetooth_PrepareToProcessEvents; - break; - case Bluetooth_Conn_RejectConnection: - HCICommandHeader = (Bluetooth_HCICommand_Header_t) - { - OpCode: {OGF: OGF_LINK_CONTROL, OCF: OCF_LINK_CONTROL_ACCEPT_CONNECTION_REQUEST}, - ParameterLength: sizeof(Bluetooth_HCICommand_RejectConnectionRequest_Params_t), - }; - - BT_DEBUG("(HCI) Enter State: Bluetooth_Conn_RejectConnection", NULL); - - Bluetooth_HCICommand_RejectConnectionRequest_Params_t RejectConnectionParams; - - memcpy(RejectConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress, - sizeof(Bluetooth_TempDeviceAddress)); - RejectConnectionParams.Reason = ERROR_LIMITED_RESOURCES; - - Bluetooth_SendHCICommand(&AcceptConnectionParams, sizeof(AcceptConnectionParams)); - - Bluetooth_HCIProcessingState = Bluetooth_PrepareToProcessEvents; - break; - case Bluetooth_Conn_SendPINCode: - HCICommandHeader = (Bluetooth_HCICommand_Header_t) - { - OpCode: {OGF: OGF_LINK_CONTROL, OCF: OCF_LINK_CONTROL_PIN_CODE_REQUEST_REPLY}, - ParameterLength: sizeof(Bluetooth_HCICommand_PinCodeResponse_Params_t), - }; - - BT_DEBUG("(HCI) Enter State: Bluetooth_Conn_SendPINCode", NULL); - BT_DEBUG("(HCI) -- PIN: %s", Bluetooth_DeviceConfiguration.PINCode); - - Bluetooth_HCICommand_PinCodeResponse_Params_t PINCodeRequestParams; - - memcpy(PINCodeRequestParams.RemoteAddress, Bluetooth_TempDeviceAddress, - sizeof(Bluetooth_TempDeviceAddress)); - PINCodeRequestParams.PINCodeLength = strlen(Bluetooth_DeviceConfiguration.PINCode); - memcpy(PINCodeRequestParams.PINCode, Bluetooth_DeviceConfiguration.PINCode, - sizeof(Bluetooth_DeviceConfiguration.PINCode)); - - Bluetooth_SendHCICommand(&PINCodeRequestParams, sizeof(PINCodeRequestParams)); - - do - { - while (!(Bluetooth_GetNextHCIEventHeader())); - Bluetooth_DiscardRemainingHCIEventParameters(); - } while (HCIEventHeader.EventCode != EVENT_COMMAND_COMPLETE); - - Bluetooth_HCIProcessingState = Bluetooth_PrepareToProcessEvents; - break; - } -} diff --git a/Demos/BluetoothHost/BluetoothHCICommands.h b/Demos/BluetoothHost/BluetoothHCICommands.h deleted file mode 100644 index 673c6457ab..0000000000 --- a/Demos/BluetoothHost/BluetoothHCICommands.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#ifndef _BLUETOOTH_HCICOMMANDS_H_ -#define _BLUETOOTH_HCICOMMANDS_H_ - - /* Includes: */ - #include - #include - #include - - #include - - #include "BluetoothStack.h" - #include "BluetoothClassCodes.h" - - /* Macros: */ - #define OGF_LINK_CONTROL 0x01 - #define OGF_CTRLR_BASEBAND 0x03 - #define OGF_CTRLR_INFORMATIONAL 0x04 - - #define OCF_LINK_CONTROL_INQUIRY 0x0001 - #define OCF_LINK_CONTROL_INQUIRY_CANCEL 0x0002 - #define OCF_LINK_CONTROL_PERIODIC_INQUIRY 0x0003 - #define OCF_LINK_CONTROL_EXIT_PERIODIC_INQUIRY 0x0004 - #define OCF_LINK_CONTROL_CREATE_CONNECTION 0x0005 - #define OCF_LINK_CONTROL_DISCONNECT 0x0006 - #define OCF_LINK_CONTROL_CREATE_CONNECTION_CANCEL 0x0008 - #define OCF_LINK_CONTROL_ACCEPT_CONNECTION_REQUEST 0x0009 - #define OCF_LINK_CONTROL_REJECT_CONNECTION_REQUEST 0x000A - #define OCF_LINK_CONTROL_LINK_KEY_REQUEST_REPLY 0x000B - #define OCF_LINK_CONTROL_LINK_KEY_REQUEST_NEG_REPLY 0x000C - #define OCF_LINK_CONTROL_PIN_CODE_REQUEST_REPLY 0x000D - #define OCF_LINK_CONTROL_PIN_CODE_REQUEST_NEG_REPLY 0x000E - #define OCF_LINK_CONTROL_CHANGE_CONNECTION_PACKET_TYPE 0x000F - #define OCF_LINK_CONTROL_REMOTE_NAME_REQUEST 0x0019 - #define OCF_CTRLR_BASEBAND_SET_EVENT_MASK 0x0001 - #define OCF_CTRLR_BASEBAND_RESET 0x0003 - #define OCF_CTRLR_BASEBAND_WRITE_PIN_TYPE 0x000A - #define OCF_CTRLR_BASEBAND_WRITE_LOCAL_NAME 0x0013 - #define OCF_CTRLR_BASEBAND_READ_LOCAL_NAME 0x0014 - #define OCF_CTRLR_BASEBAND_WRITE_SCAN_ENABLE 0x001A - #define OCF_CTRLR_BASEBAND_WRITE_CLASS_OF_DEVICE 0x0024 - #define OCF_CTRLR_BASEBAND_WRITE_SIMPLE_PAIRING_MODE 0x0056 - #define OCF_CTRLR_BASEBAND_WRITE_AUTHENTICATION_ENABLE 0x0020 - #define OGF_CTRLR_INFORMATIONAL_READBUFFERSIZE 0x0005 - - #define EVENT_COMMAND_STATUS 0x0F - #define EVENT_COMMAND_COMPLETE 0x0E - #define EVENT_CONNECTION_COMPLETE 0x03 - #define EVENT_CONNECTION_REQUEST 0x04 - #define EVENT_DISCONNECTION_COMPLETE 0x05 - #define EVENT_REMOTE_NAME_REQUEST_COMPLETE 0x07 - #define EVENT_PIN_CODE_REQUEST 0x16 - - #define ERROR_LIMITED_RESOURCES 0x0D - - /* Type Defines: */ - typedef struct - { - struct - { - int OCF : 10; - int OGF : 6; - } OpCode; - - uint8_t ParameterLength; - uint8_t Parameters[]; - } Bluetooth_HCICommand_Header_t; - - typedef struct - { - uint8_t EventCode; - uint8_t ParameterLength; - } Bluetooth_HCIEvent_Header_t; - - typedef struct - { - uint8_t CommandStatus; - uint8_t CommandPackets; - - struct - { - int OCF : 10; - int OGF : 6; - } OpCode; - } Bluetooth_HCIEvent_CommandStatus_Header_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - uint8_t ClassOfDevice_Service; - uint16_t ClassOfDevice_MajorMinor; - uint8_t LinkType; - } Bluetooth_HCIEvent_ConnectionRequest_Header_t; - - typedef struct - { - uint8_t Status; - uint16_t ConnectionHandle; - uint8_t RemoteAddress[6]; - uint8_t LinkType; - uint8_t EncryptionEnabled; - } Bluetooth_HCIEvent_ConnectionComplete_Header_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - uint8_t SlaveRole; - } Bluetooth_HCICommand_AcceptConnectionRequest_Params_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - uint8_t Reason; - } Bluetooth_HCICommand_RejectConnectionRequest_Params_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - uint8_t PINCodeLength; - char PINCode[16]; - } Bluetooth_HCICommand_PinCodeResponse_Params_t; - - /* Enums: */ - enum Bluetooth_ScanEnable_Modes_t - { - NoScansEnabled = 0, - InquiryScanOnly = 1, - PageScanOnly = 2, - InquiryAndPageScans = 3, - }; - - enum BluetoothStack_States_t - { - Bluetooth_Init = 0, - Bluetooth_Init_Reset = 1, - Bluetooth_Init_ReadBufferSize = 2, - Bluetooth_Init_SetEventMask = 3, - Bluetooth_Init_SetLocalName = 4, - Bluetooth_Init_SetDeviceClass = 5, - Bluetooth_Init_WriteScanEnable = 6, - Bluetooth_PrepareToProcessEvents = 7, - Bluetooth_ProcessEvents = 8, - Bluetooth_Conn_AcceptConnection = 9, - Bluetooth_Conn_RejectConnection = 10, - Bluetooth_Conn_SendPINCode = 11, - }; - - /* External Variables: */ - extern uint8_t Bluetooth_HCIProcessingState; - - /* Function Prototypes: */ - void Bluetooth_ProcessHCICommands(void); - - #if defined(INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C) - static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint8_t ParamLength); - static bool Bluetooth_GetNextHCIEventHeader(void); - static void Bluetooth_DiscardRemainingHCIEventParameters(void); - static void Bluetooth_ProcessHCICommands(void); - #endif - -#endif diff --git a/Demos/BluetoothHost/BluetoothHost.c b/Demos/BluetoothHost/BluetoothHost.c deleted file mode 100644 index 2e5ae44d2d..0000000000 --- a/Demos/BluetoothHost/BluetoothHost.c +++ /dev/null @@ -1,282 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/* - Bluetooth Dongle host demo application. - - ** NOT CURRENTLY FUNCTIONAL - DO NOT USE ** -*/ - -/* - USB Mode: Host - USB Class: Bluetooth USB Transport Class - USB Subclass: Bluetooth HCI USB Transport - Relevant Standards: Bluetooth 2.0 Standard - Bluetooth 2.0 HCI USB Transport Layer Addendum - Bluetooth Assigned Numbers (Baseband) - Usable Speeds: Full Speed Mode -*/ - -#include "BluetoothHost.h" - -/* Project Tags, for reading out using the ButtLoad project */ -BUTTLOADTAG(ProjName, "LUFA BT Host App"); -BUTTLOADTAG(BuildTime, __TIME__); -BUTTLOADTAG(BuildDate, __DATE__); -BUTTLOADTAG(LUFAVersion, "LUFA V" LUFA_VERSION_STRING); - -/* Scheduler Task List */ -TASK_LIST -{ - { Task: USB_USBTask , TaskStatus: TASK_STOP }, - { Task: USB_Bluetooth_Host , TaskStatus: TASK_STOP }, - { Task: Bluetooth_Task , TaskStatus: TASK_STOP }, -}; - -Bluetooth_Device_t Bluetooth_DeviceConfiguration = - { - Class: (DEVICE_CLASS_SERVICE_CAPTURING | DEVICE_CLASS_MAJOR_COMPUTER | DEVICE_CLASS_MINOR_COMPUTER_PALM), - PINCode: "0000", - Name: "LUFA Bluetooth Demo" - }; - - -int main(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - /* Hardware Initialization */ - SerialStream_Init(9600, false); - LEDs_Init(); - - /* Indicate USB not ready */ - UpdateStatus(Status_USBNotReady); - - /* Startup message */ - puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY - "Bluetooth Host Demo running.\r\n" ESC_INVERSE_OFF)); - - /* Initialize Scheduler so that it can be used */ - Scheduler_Init(); - - /* Initialize USB Subsystem */ - USB_Init(); - - /* Scheduling routine never returns, so put this last in the main function */ - Scheduler_Start(); -} - -EVENT_HANDLER(USB_DeviceAttached) -{ - puts_P(PSTR("Device Attached.\r\n")); - UpdateStatus(Status_USBEnumerating); - - /* Start USB management task to enumerate the device */ - Scheduler_SetTaskMode(USB_USBTask, TASK_RUN); -} - -EVENT_HANDLER(USB_DeviceUnattached) -{ - /* Stop USB management and Bluetooth tasks */ - Scheduler_SetTaskMode(USB_USBTask, TASK_STOP); - Scheduler_SetTaskMode(USB_Bluetooth_Host, TASK_STOP); - Scheduler_SetTaskMode(Bluetooth_Task, TASK_STOP); - - puts_P(PSTR("\r\nDevice Unattached.\r\n")); - UpdateStatus(Status_USBNotReady); -} - -EVENT_HANDLER(USB_DeviceEnumerationComplete) -{ - /* Once device is fully enumerated, start the Bluetooth Host task */ - Scheduler_SetTaskMode(USB_Bluetooth_Host, TASK_RUN); - Scheduler_SetTaskMode(Bluetooth_Task, TASK_RUN); - - UpdateStatus(Status_USBReady); -} - -EVENT_HANDLER(USB_HostError) -{ - USB_ShutDown(); - - puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n")); - printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode); - - UpdateStatus(Status_HardwareError); - for(;;); -} - -EVENT_HANDLER(USB_DeviceEnumerationFailed) -{ - puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n")); - printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode); - printf_P(PSTR(" -- In State %d\r\n"), USB_HostState); - - UpdateStatus(Status_EnumerationError); -} - -TASK(USB_Bluetooth_Host) -{ - uint8_t ErrorCode; - - switch (USB_HostState) - { - case HOST_STATE_Addressed: - puts_P(PSTR("Getting Device Data.\r\n")); - - /* Get and process the configuration descriptor data */ - if ((ErrorCode = ProcessDeviceDescriptor()) != SuccessfulDeviceRead) - { - if (ErrorCode == ControlErrorDuringDeviceRead) - puts_P(PSTR("Control Error (Get Device).\r\n")); - else - puts_P(PSTR("Invalid Device.\r\n")); - - printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); - - /* Indicate error via status LEDs */ - LEDs_SetAllLEDs(LEDS_LED1); - - /* Wait until USB device disconnected */ - while (USB_IsConnected); - break; - } - - puts_P(PSTR("Bluetooth Dongle Detected.\r\n")); - - /* Standard request to set the device configuration to configuration 1 */ - USB_HostRequest = (USB_Host_Request_Header_t) - { - bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE), - bRequest: REQ_SetConfiguration, - wValue: 1, - wIndex: 0, - wLength: 0, - }; - - /* Send the request, display error and wait for device detatch if request fails */ - if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) - { - puts_P(PSTR("Control Error (Set Configuration).\r\n")); - printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); - - /* Indicate error via status LEDs */ - LEDs_SetAllLEDs(LEDS_LED1); - - /* Wait until USB device disconnected */ - while (USB_IsConnected); - break; - } - - USB_HostState = HOST_STATE_Configured; - break; - case HOST_STATE_Configured: - puts_P(PSTR("Getting Config Data.\r\n")); - - /* Get and process the configuration descriptor data */ - if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) - { - if (ErrorCode == ControlErrorDuringConfigRead) - puts_P(PSTR("Control Error (Get Configuration).\r\n")); - else - puts_P(PSTR("Invalid Device.\r\n")); - - printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); - - /* Indicate error via status LEDs */ - LEDs_SetAllLEDs(LEDS_LED1); - - /* Wait until USB device disconnected */ - while (USB_IsConnected); - break; - } - - puts_P(PSTR("Bluetooth Dongle Enumerated.\r\n")); - - USB_HostState = HOST_STATE_Ready; - break; - case HOST_STATE_Ready: - if (Bluetooth_HCIProcessingState != Bluetooth_ProcessEvents) - { - UpdateStatus(Status_BluetoothBusy); - } - else - { - if (Bluetooth_Connection.IsConnected) - UpdateStatus(Status_BluetoothConnected); - else - UpdateStatus(Status_USBReady); - } - - break; - } -} - -/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to - * log to a serial port, or anything else that is suitable for status updates. - * - * \param CurrentStatus Current status of the system, from the MouseHostViaInt_StatusCodes_t enum - */ -void UpdateStatus(uint8_t CurrentStatus) -{ - uint8_t LEDMask = LEDS_NO_LEDS; - - /* Set the LED mask to the appropriate LED mask based on the given status code */ - switch (CurrentStatus) - { - case Status_USBNotReady: - LEDMask = (LEDS_LED1); - break; - case Status_USBEnumerating: - LEDMask = (LEDS_LED1 | LEDS_LED2); - break; - case Status_USBReady: - LEDMask = (LEDS_LED2); - break; - case Status_EnumerationError: - case Status_HardwareError: - LEDMask = (LEDS_LED1 | LEDS_LED3); - break; - case Status_BluetoothConnected: - LEDMask = (LEDS_LED2 | LEDS_LED4); - break; - case Status_BluetoothBusy: - LEDMask = (LEDS_LED2 | LEDS_LED3 | LEDS_LED4); - break; - } - - /* Set the board LEDs to the new LED mask */ - LEDs_SetAllLEDs(LEDMask); -} diff --git a/Demos/BluetoothHost/BluetoothHost.h b/Demos/BluetoothHost/BluetoothHost.h deleted file mode 100644 index 51d4173566..0000000000 --- a/Demos/BluetoothHost/BluetoothHost.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#ifndef _BLUETOOTH_HOST_H_ -#define _BLUETOOTH_HOST_H_ - - /* Includes: */ - #include - #include - #include - #include - #include - - #include "BluetoothStack.h" - - #include "DeviceDescriptor.h" - #include "ConfigDescriptor.h" - - #include // Library Version Information - #include // PROGMEM tags readable by the ButtLoad project - #include // ANSI Terminal Escape Codes - #include // USB Functionality - #include // Serial stream driver - #include // LEDs driver - #include // Simple scheduler for task management - - /* Macros: */ - #define BLUETOOTH_DATA_IN_PIPE 1 - #define BLUETOOTH_DATA_OUT_PIPE 2 - #define BLUETOOTH_EVENTS_PIPE 3 - - /* Task Definitions: */ - TASK(USB_Bluetooth_Host); - - /* Enums: */ - /** Enum for the possible status codes for passing to the UpdateStatus() function. */ - enum MouseHostViaInt_StatusCodes_t - { - Status_USBNotReady = 0, /**< USB is not ready (disconnected from a USB device) */ - Status_USBEnumerating = 1, /**< USB interface is enumerating */ - Status_USBReady = 2, /**< USB interface is connected and ready */ - Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */ - Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */ - Status_BluetoothConnected = 5, /**< Bluetooth stack connected to device and idle */ - Status_BluetoothBusy = 6, /**< Bluetooth stack busy */ - }; - - /* Event Handlers: */ - HANDLES_EVENT(USB_DeviceAttached); - HANDLES_EVENT(USB_DeviceUnattached); - HANDLES_EVENT(USB_DeviceEnumerationComplete); - HANDLES_EVENT(USB_HostError); - HANDLES_EVENT(USB_DeviceEnumerationFailed); - - /* Function Prototypes: */ - void UpdateStatus(uint8_t CurrentStatus); - -#endif diff --git a/Demos/BluetoothHost/BluetoothStack.c b/Demos/BluetoothHost/BluetoothStack.c deleted file mode 100644 index a55c5b90cc..0000000000 --- a/Demos/BluetoothHost/BluetoothStack.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "BluetoothStack.h" - -Bluetooth_Connection_t Bluetooth_Connection = {IsConnected: false}; - -Bluetooth_Device_t Bluetooth_DeviceConfiguration ATTR_WEAK = - { - Class: DEVICE_CLASS_MAJOR_MISC, - PINCode: "0000", - Name: "LUFA BT Device" - }; - -TASK(Bluetooth_Task) -{ - if (!(USB_IsConnected) || (USB_HostState != HOST_STATE_Ready)) - Bluetooth_HCIProcessingState = Bluetooth_Init; - - Bluetooth_ProcessHCICommands(); - Bluetooth_ProcessACLPackets(); -} - -Bluetooth_Channel_t* Bluetooth_GetChannelData(uint16_t ChannelNumber, bool SearchBySource) -{ - Bluetooth_Channel_t* CurrentChannelStructure; - - for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) - { - CurrentChannelStructure = &Bluetooth_Connection.Channels[i]; - - uint16_t CurrentChannelNumber = ((SearchBySource) ? CurrentChannelStructure->RemoteNumber : CurrentChannelStructure->LocalNumber); - - if (CurrentChannelNumber == ChannelNumber) - return CurrentChannelStructure; - } - - return NULL; -} - -Bluetooth_Channel_t* Bluetooth_InitChannelData(uint16_t RemoteChannelNumber, uint16_t PSM) -{ - Bluetooth_Channel_t* CurrentChannelStructure; - - for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) - { - CurrentChannelStructure = &Bluetooth_Connection.Channels[i]; - - if (CurrentChannelStructure->State == Channel_Closed) - { - CurrentChannelStructure->RemoteNumber = RemoteChannelNumber; - CurrentChannelStructure->LocalNumber = (BLUETOOTH_CHANNELNUMBER_BASEOFFSET + i); - CurrentChannelStructure->PSM = PSM; - CurrentChannelStructure->State = Channel_Config; - - return CurrentChannelStructure; - } - } - - return NULL; -} diff --git a/Demos/BluetoothHost/BluetoothStack.h b/Demos/BluetoothHost/BluetoothStack.h deleted file mode 100644 index 657c829f7b..0000000000 --- a/Demos/BluetoothHost/BluetoothStack.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#ifndef _BLUETOOTH_STACK_ -#define _BLUETOOTH_STACK_ - - /* Includes: */ - #include - #include - - #include "BluetoothHost.h" - #include "BluetoothHCICommands.h" - #include "BluetoothACLPackets.h" - - /* Macros: */ - #define BLUETOOTH_MAX_OPEN_CHANNELS 2 - #define BLUETOOTH_CHANNELNUMBER_BASEOFFSET 0x0040 - - #define CHANNEL_LOOKUP_BY_SOURCE true - #define CHANNEL_LOOKUP_BY_DESTINATION false - - #define BT_DEBUG(s, ...) printf_P(PSTR(s "\r\n"), __VA_ARGS__) - - /* Enums: */ - enum Bluetooth_Channel_State_t - { - Channel_Closed = 0, - Channel_WaitConnect = 1, - Channel_WaitConnectRsp = 2, - Channel_Config = 3, - Channel_Open = 4, - Channel_WaitDisconnect = 5, - }; - - /* Type Defines: */ - typedef struct - { - uint8_t State; - uint16_t LocalNumber; - uint16_t RemoteNumber; - uint16_t PSM; - uint16_t MTU; - } Bluetooth_Channel_t; - - typedef struct - { - bool IsConnected; - uint16_t ConnectionHandle; - uint8_t DeviceAddress[6]; - Bluetooth_Channel_t Channels[BLUETOOTH_MAX_OPEN_CHANNELS]; - } Bluetooth_Connection_t; - - typedef struct - { - uint32_t Class; - char PINCode[16]; - char Name[]; - } Bluetooth_Device_t; - - /* Tasks: */ - TASK(Bluetooth_Task); - - /* Function Prototypes: */ - Bluetooth_Channel_t* Bluetooth_GetChannelData(uint16_t ChannelNumber, bool SearchBySource); - Bluetooth_Channel_t* Bluetooth_InitChannelData(uint16_t RemoteChannelNumber, uint16_t PSM); - - /* External Variables: */ - extern Bluetooth_Device_t Bluetooth_DeviceConfiguration; - extern Bluetooth_Connection_t Bluetooth_Connection; - -#endif diff --git a/Demos/BluetoothHost/ConfigDescriptor.c b/Demos/BluetoothHost/ConfigDescriptor.c deleted file mode 100644 index 16ba1b0603..0000000000 --- a/Demos/BluetoothHost/ConfigDescriptor.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "ConfigDescriptor.h" - -uint8_t ProcessConfigurationDescriptor(void) -{ - uint8_t* ConfigDescriptorData; - uint16_t ConfigDescriptorSize; - uint8_t FoundEndpoints = 0; - - /* Get Configuration Descriptor size from the device */ - if (USB_Host_GetDeviceConfigDescriptor(&ConfigDescriptorSize, NULL) != HOST_SENDCONTROL_Successful) - return ControlErrorDuringConfigRead; - - /* Ensure that the Configuration Descriptor isn't too large */ - if (ConfigDescriptorSize > MAX_CONFIG_DESCRIPTOR_SIZE) - return DescriptorTooLarge; - - /* Allocate enough memory for the entire config descriptor */ - ConfigDescriptorData = alloca(ConfigDescriptorSize); - - /* Retrieve the entire configuration descriptor into the allocated buffer */ - USB_Host_GetDeviceConfigDescriptor(&ConfigDescriptorSize, ConfigDescriptorData); - - /* Validate returned data - ensure first entry is a configuration header descriptor */ - if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration) - return InvalidConfigDataReturned; - - /* The bluetooth USB transport addendium mandates that the data (not streaming voice) endpoints - be in the first interface descriptor (interface 0) */ - USB_Host_GetNextDescriptorOfType(&ConfigDescriptorSize, &ConfigDescriptorData, DTYPE_Interface); - - /* Ensure that an interface was found, and the end of the descriptor was not reached */ - if (!(ConfigDescriptorSize)) - return NoInterfaceFound; - - /* Get the data IN, data OUT and event notification endpoints for the bluetooth interface */ - while (FoundEndpoints != ((1 << BLUETOOTH_DATA_IN_PIPE) | (1 << BLUETOOTH_DATA_OUT_PIPE) | - (1 << BLUETOOTH_EVENTS_PIPE))) - { - /* Fetch the next endpoint from the current bluetooth interface */ - if (USB_Host_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData, - NextInterfaceBluetoothDataEndpoint)) - { - /* Descriptor not found, error out */ - return NoEndpointFound; - } - - USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t); - - /* Check if the endpoint is a bulk or interrupt type endpoint */ - if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT) - { - if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN) - { - /* Configure the events IN pipe */ - Pipe_ConfigurePipe(BLUETOOTH_EVENTS_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - EndpointData->EndpointAddress, EndpointData->EndpointSize, - PIPE_BANK_SINGLE); - - Pipe_SetInfiniteINRequests(); - Pipe_SetInterruptPeriod(EndpointData->PollingIntervalMS); - - /* Set the flag indicating that the events notification pipe has been found */ - FoundEndpoints |= (1 << BLUETOOTH_EVENTS_PIPE); - } - } - else - { - if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN) - { - /* Configure the data IN pipe */ - Pipe_ConfigurePipe(BLUETOOTH_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - EndpointData->EndpointAddress, EndpointData->EndpointSize, - PIPE_BANK_SINGLE); - - Pipe_SetInfiniteINRequests(); - - /* Set the flag indicating that the data IN pipe has been found */ - FoundEndpoints |= (1 << BLUETOOTH_DATA_IN_PIPE); - } - else - { - /* Configure the data OUT pipe */ - Pipe_ConfigurePipe(BLUETOOTH_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - EndpointData->EndpointAddress, EndpointData->EndpointSize, - PIPE_BANK_SINGLE); - - /* Set the flag indicating that the data OUT pipe has been found */ - FoundEndpoints |= (1 << BLUETOOTH_DATA_OUT_PIPE); - } - } - - } - - /* Valid data found, return success */ - return SuccessfulConfigRead; -} - -DESCRIPTOR_COMPARATOR(NextInterfaceBluetoothDataEndpoint) -{ - /* PURPOSE: Find next interface endpoint descriptor before next interface descriptor */ - - if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint) - return Descriptor_Search_Found; - else if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface) - return Descriptor_Search_Fail; - - return Descriptor_Search_NotFound; -} - diff --git a/Demos/BluetoothHost/ConfigDescriptor.h b/Demos/BluetoothHost/ConfigDescriptor.h deleted file mode 100644 index 35531bf460..0000000000 --- a/Demos/BluetoothHost/ConfigDescriptor.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#ifndef _CONFIGDESCRIPTOR_H_ -#define _CONFIGDESCRIPTOR_H_ - - /* Includes: */ - #include // USB Functionality - #include // Configuration Descriptor Parser - - #include "BluetoothHost.h" - - /* Macros: */ - #define MAX_CONFIG_DESCRIPTOR_SIZE 512 - - /* Enums: */ - enum BluetoothHost_GetConfigDescriptorDataCodes_t - { - SuccessfulConfigRead = 0, - ControlErrorDuringConfigRead = 1, - InvalidConfigDataReturned = 2, - DescriptorTooLarge = 3, - NoInterfaceFound = 4, - NoEndpointFound = 5, - }; - - /* Configuration Descriptor Comparison Functions: */ - DESCRIPTOR_COMPARATOR(NextInterfaceBluetoothDataEndpoint); - - /* Function Prototypes: */ - uint8_t ProcessConfigurationDescriptor(void); - -#endif diff --git a/Demos/BluetoothHost/DeviceDescriptor.c b/Demos/BluetoothHost/DeviceDescriptor.c deleted file mode 100644 index 67e212cba6..0000000000 --- a/Demos/BluetoothHost/DeviceDescriptor.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "DeviceDescriptor.h" - -uint8_t ProcessDeviceDescriptor(void) -{ - USB_Descriptor_Device_t DeviceDescriptor; - - /* Standard request to get the device descriptor */ - USB_HostRequest = (USB_Host_Request_Header_t) - { - bmRequestType: (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), - bRequest: REQ_GetDescriptor, - wValue: (DTYPE_Device << 8), - wIndex: 0, - wLength: sizeof(USB_Descriptor_Device_t), - }; - - /* Send the request to retrieve the device descriptor */ - if (USB_Host_SendControlRequest((void*)&DeviceDescriptor) != HOST_SENDCONTROL_Successful) - return ControlErrorDuringDeviceRead; - - /* Validate returned data - ensure the returned data is a device descriptor */ - if (DeviceDescriptor.Header.Type != DTYPE_Device) - return InvalidDeviceDataReturned; - - if ((DeviceDescriptor.Class != BLUETOOTH_DEVICE_CLASS) || - (DeviceDescriptor.SubClass != BLUETOOTH_DEVICE_SUBCLASS) || - (DeviceDescriptor.Protocol != BLUETOOTH_DEVICE_PROTOCOL)) - { - return IncorrectDevice; - } - - return SuccessfulDeviceRead; -} diff --git a/Demos/BluetoothHost/DeviceDescriptor.h b/Demos/BluetoothHost/DeviceDescriptor.h deleted file mode 100644 index 46edbdb270..0000000000 --- a/Demos/BluetoothHost/DeviceDescriptor.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#ifndef _DEVICEDESCRIPTOR_H_ -#define _DEVICEDESCRIPTOR_H_ - - /* Includes: */ - #include // USB Functionality - - #include "BluetoothHost.h" - - /* Macros: */ - #define BLUETOOTH_DEVICE_CLASS 0xE0 - #define BLUETOOTH_DEVICE_SUBCLASS 0x01 - #define BLUETOOTH_DEVICE_PROTOCOL 0x01 - - /* Enums: */ - enum BluetoothHost_GetDeviceDescriptorDataCodes_t - { - SuccessfulDeviceRead = 0, - ControlErrorDuringDeviceRead = 1, - InvalidDeviceDataReturned = 2, - IncorrectDevice = 3, - }; - - /* Function Prototypes: */ - uint8_t ProcessDeviceDescriptor(void); - -#endif diff --git a/Demos/BluetoothHost/makefile b/Demos/BluetoothHost/makefile deleted file mode 100644 index 9fd93d4bff..0000000000 --- a/Demos/BluetoothHost/makefile +++ /dev/null @@ -1,730 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*- -#---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# >> Modified for use with the LUFA project. << -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# Dean Camera -# Opendous Inc. -# Denver Gingerich -# -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make doxygen = Generate DoxyGen documentation for the project (must have -# DoxyGen installed) -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - - -# MCU name -MCU = at90usb1287 - - -# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called -# "Board" inside the application directory. -BOARD = USBKEY - - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# Typical values are: -# F_CPU = 1000000 -# F_CPU = 1843200 -# F_CPU = 2000000 -# F_CPU = 3686400 -# F_CPU = 4000000 -# F_CPU = 7372800 -# F_CPU = 8000000 -# F_CPU = 11059200 -# F_CPU = 14745600 -# F_CPU = 16000000 -# F_CPU = 18432000 -# F_CPU = 20000000 -F_CPU = 8000000 - - -# Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the -# input clock frequency (before any prescaling is performed). This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_CLOCK = 8000000 - - -# Output format. (can be srec, ihex, binary) -FORMAT = ihex - - -# Target file name (without extension). -TARGET = BluetoothHost - - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - - -# List C source files here. (C dependencies are automatically generated.) -SRC = $(TARGET).c \ - DeviceDescriptor.c \ - ConfigDescriptor.c \ - BluetoothStack.c \ - BluetoothHCICommands.c \ - BluetoothACLPackets.c \ - ../../LUFA/Scheduler/Scheduler.c \ - ../../LUFA/Drivers/AT90USBXXX/Serial_Stream.c \ - ../../LUFA/Drivers/AT90USBXXX/Serial.c \ - ../../LUFA/Drivers/USB/Class/ConfigDescriptor.c \ - ../../LUFA/Drivers/USB/LowLevel/LowLevel.c \ - ../../LUFA/Drivers/USB/LowLevel/Pipe.c \ - ../../LUFA/Drivers/USB/LowLevel/Host.c \ - ../../LUFA/Drivers/USB/LowLevel/HostChapter9.c \ - ../../LUFA/Drivers/USB/HighLevel/USBTask.c \ - ../../LUFA/Drivers/USB/HighLevel/USBInterrupt.c \ - ../../LUFA/Drivers/USB/HighLevel/Events.c \ - -# List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = - - -# List Assembler source files here. -# Make them always end in a capital .S. Files ending in a lowercase .s -# will not be considered source files but generated files (assembler -# output from the compiler), and will be deleted upon "make clean"! -# Even though the DOS/Win* filesystem matches both .s and .S the same, -# it will preserve the spelling of the filenames, and gcc itself does -# care about how the name is spelled on its command-line. -ASRC = - - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s - - -# Debugging format. -# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. -# AVR Studio 4.10 requires dwarf-2. -# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. -DEBUG = dwarf-2 - - -# List any extra directories to look for include files here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = ../../ - - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu99 - - -# Place -D or -U options here for C sources -CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) -CDEFS += -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DUSB_HOST_ONLY -DNO_STREAM_CALLBACKS -CDEFS += -DUSE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -# Place -D or -U options here for ASM sources -ADEFS = -DF_CPU=$(F_CPU) - - -# Place -D or -U options here for C++ sources -CPPDEFS = -DF_CPU=$(F_CPU)UL -#CPPDEFS += -D__STDC_LIMIT_MACROS -#CPPDEFS += -D__STDC_CONSTANT_MACROS - - - -#---------------- Compiler Options C ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CFLAGS = -g$(DEBUG) -CFLAGS += $(CDEFS) -CFLAGS += -O$(OPT) -CFLAGS += -funsigned-char -CFLAGS += -funsigned-bitfields -CFLAGS += -ffunction-sections -CFLAGS += -fpack-struct -CFLAGS += -fshort-enums -CFLAGS += -finline-limit=20 -CFLAGS += -Wall -CFLAGS += -Wstrict-prototypes -CFLAGS += -Wundef -#CFLAGS += -fno-unit-at-a-time -#CFLAGS += -Wunreachable-code -#CFLAGS += -Wsign-compare -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) -CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -CFLAGS += $(CSTANDARD) - - -#---------------- Compiler Options C++ ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CPPFLAGS = -g$(DEBUG) -CPPFLAGS += $(CPPDEFS) -CPPFLAGS += -O$(OPT) -CPPFLAGS += -funsigned-char -CPPFLAGS += -funsigned-bitfields -CPPFLAGS += -fpack-struct -CPPFLAGS += -fshort-enums -CPPFLAGS += -fno-exceptions -CPPFLAGS += -Wall -CFLAGS += -Wundef -#CPPFLAGS += -mshort-calls -#CPPFLAGS += -fno-unit-at-a-time -#CPPFLAGS += -Wstrict-prototypes -#CPPFLAGS += -Wunreachable-code -#CPPFLAGS += -Wsign-compare -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) -CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -#CPPFLAGS += $(CSTANDARD) - - -#---------------- Assembler Options ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 - - -#---------------- Library Options ---------------- -# Minimalistic printf version -PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min - -# Floating point printf version (requires MATH_LIB = -lm below) -PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt - -# If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = -#PRINTF_LIB = $(PRINTF_LIB_MIN) -#PRINTF_LIB = $(PRINTF_LIB_FLOAT) - - -# Minimalistic scanf version -SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min - -# Floating point + %[ scanf version (requires MATH_LIB = -lm below) -SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt - -# If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = -#SCANF_LIB = $(SCANF_LIB_MIN) -#SCANF_LIB = $(SCANF_LIB_FLOAT) - - -MATH_LIB = -lm - - -# List any extra directories to look for libraries here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = - - - -#---------------- External Memory Options ---------------- - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# used for variables (.data/.bss) and heap (malloc()). -#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# only used for heap (malloc()). -#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff - -EXTMEMOPTS = - - - -#---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax -LDFLAGS += -Wl,--gc-sections -LDFLAGS += $(EXTMEMOPTS) -LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) -LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) -#LDFLAGS += -T linker_script.x - - - -#---------------- Programming Options (avrdude) ---------------- - -# Programming hardware: alf avr910 avrisp bascom bsd -# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 -# -# Type: avrdude -c ? -# to get a full listing. -# -AVRDUDE_PROGRAMMER = jtagmkII - -# com1 = serial port. Use lpt1 to connect to parallel port. -AVRDUDE_PORT = usb - -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - - - -#---------------- Debugging Options ---------------- - -# For simulavr only - target MCU frequency. -DEBUG_MFREQ = $(F_CPU) - -# Set the DEBUG_UI to either gdb or insight. -# DEBUG_UI = gdb -DEBUG_UI = insight - -# Set the debugging back-end to either avarice, simulavr. -DEBUG_BACKEND = avarice -#DEBUG_BACKEND = simulavr - -# GDB Init Filename. -GDBINIT_FILE = __avr_gdbinit - -# When using avarice settings for the JTAG -JTAG_DEV = /dev/com1 - -# Debugging port used to communicate between GDB / avarice / simulavr. -DEBUG_PORT = 4242 - -# Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when -# avarice is running on a different computer. -DEBUG_HOST = localhost - - - -#============================================================================ - - -# Define programs and commands. -SHELL = sh -CC = avr-gcc -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -SIZE = avr-size -AR = avr-ar rcs -NM = avr-nm -AVRDUDE = avrdude -REMOVE = rm -f -REMOVEDIR = rm -rf -COPY = cp -WINSHELL = cmd - -# Define Messages -# English -MSG_ERRORS_NONE = Errors: none -MSG_BEGIN = -------- begin -------- -MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: -MSG_SIZE_AFTER = Size after: -MSG_COFF = Converting to AVR COFF: -MSG_EXTENDED_COFF = Converting to AVR Extended COFF: -MSG_FLASH = Creating load file for Flash: -MSG_EEPROM = Creating load file for EEPROM: -MSG_EXTENDED_LISTING = Creating Extended Listing: -MSG_SYMBOL_TABLE = Creating Symbol Table: -MSG_LINKING = Linking: -MSG_COMPILING = Compiling C: -MSG_COMPILING_CPP = Compiling C++: -MSG_ASSEMBLING = Assembling: -MSG_CLEANING = Cleaning project: -MSG_CREATING_LIBRARY = Creating library: - - - - -# Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - -# Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - - -# Compiler flags to generate dependency files. -GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d - - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) -ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - - - - -# Default target. -all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end - -# Change the build target to build a HEX file or a library. -build: elf hex eep lss sym -#build: lib - - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym -LIBNAME=lib$(TARGET).a -lib: $(LIBNAME) - - - -# Eye candy. -# AVR Studio 3.x does not check make's exit code but relies on -# the following magic strings to be generated by the compile job. -begin: - @echo - @echo $(MSG_BEGIN) - -end: - @echo $(MSG_END) - @echo - - -# Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex -ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf -MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) -FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) - -sizebefore: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ - 2>/dev/null; echo; fi - -sizeafter: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ - 2>/dev/null; echo; fi - -checkhooks: build - @echo - @echo ------- Unhooked LUFA Events ------- - @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \ - cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \ - echo "(None)" - @echo ------------------------------------ - -checklibmode: - @echo - @echo ----------- Library Mode ----------- - @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \ - | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \ - || echo "No specific mode (both device and host mode allowable)." - @echo ------------------------------------ - -checkboard: - @echo - @echo ---------- Selected Board ---------- - @echo Selected board model is $(BOARD). - @echo ------------------------------------ - -# Display compiler version information. -gccversion : - @$(CC) --version - - - -# Program the device. -program: $(TARGET).hex $(TARGET).eep - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - copy $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep - dfu-programmer $(MCU) reset - - -# Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set -# a breakpoint at main(). -gdb-config: - @$(REMOVE) $(GDBINIT_FILE) - @echo define reset >> $(GDBINIT_FILE) - @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) - @echo end >> $(GDBINIT_FILE) - @echo file $(TARGET).elf >> $(GDBINIT_FILE) - @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) -ifeq ($(DEBUG_BACKEND),simulavr) - @echo load >> $(GDBINIT_FILE) -endif - @echo break main >> $(GDBINIT_FILE) - -debug: gdb-config $(TARGET).elf -ifeq ($(DEBUG_BACKEND), avarice) - @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. - @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ - $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) - @$(WINSHELL) /c pause - -else - @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ - $(DEBUG_MFREQ) --port $(DEBUG_PORT) -endif - @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) - - - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT = $(OBJCOPY) --debugging -COFFCONVERT += --change-section-address .data-0x800000 -COFFCONVERT += --change-section-address .bss-0x800000 -COFFCONVERT += --change-section-address .noinit-0x800000 -COFFCONVERT += --change-section-address .eeprom-0x810000 - - - -coff: $(TARGET).elf - @echo - @echo $(MSG_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-avr $< $(TARGET).cof - - -extcoff: $(TARGET).elf - @echo - @echo $(MSG_EXTENDED_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof - - - -# Create final output files (.hex, .eep) from ELF output file. -%.hex: %.elf - @echo - @echo $(MSG_FLASH) $@ - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -%.eep: %.elf - @echo - @echo $(MSG_EEPROM) $@ - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 - -# Create extended listing file from ELF output file. -%.lss: %.elf - @echo - @echo $(MSG_EXTENDED_LISTING) $@ - $(OBJDUMP) -h -z -S $< > $@ - -# Create a symbol table from ELF output file. -%.sym: %.elf - @echo - @echo $(MSG_SYMBOL_TABLE) $@ - $(NM) -n $< > $@ - - - -# Create library from object files. -.SECONDARY : $(TARGET).a -.PRECIOUS : $(OBJ) -%.a: $(OBJ) - @echo - @echo $(MSG_CREATING_LIBRARY) $@ - $(AR) $@ $(OBJ) - - -# Link: create ELF output file from object files. -.SECONDARY : $(TARGET).elf -.PRECIOUS : $(OBJ) -%.elf: $(OBJ) - @echo - @echo $(MSG_LINKING) $@ - $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) - - -# Compile: create object files from C source files. -$(OBJDIR)/%.o : %.c - @echo - @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create object files from C++ source files. -$(OBJDIR)/%.o : %.cpp - @echo - @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -%.s : %.c - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C++ source files. -%.s : %.cpp - $(CC) -S $(ALL_CPPFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -$(OBJDIR)/%.o : %.S - @echo - @echo $(MSG_ASSEMBLING) $< - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - -# Create preprocessed source for use in sending a bug report. -%.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ - - -# Target: clean project. -clean: begin clean_list clean_binary end - -clean_binary: - $(REMOVE) $(TARGET).hex - -clean_list: - @echo $(MSG_CLEANING) - $(REMOVE) $(TARGET).eep - $(REMOVE) $(TARGET)eep.hex - $(REMOVE) $(TARGET).cof - $(REMOVE) $(TARGET).elf - $(REMOVE) $(TARGET).map - $(REMOVE) $(TARGET).sym - $(REMOVE) $(TARGET).lss - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) - $(REMOVE) $(SRC:.c=.s) - $(REMOVE) $(SRC:.c=.d) - $(REMOVE) $(SRC:.c=.i) - $(REMOVEDIR) .dep - - -doxygen: - @echo Generating Project Documentation... - @doxygen Doxygen.conf - @echo Documentation Generation Complete. - -clean_doxygen: - rm -rf Documentation - -# Create object files directory -$(shell mkdir $(OBJDIR) 2>/dev/null) - - -# Include the dependency files. --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - - -# Listing of phony targets. -.PHONY : all checkhooks checklibmode checkboard \ -begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff clean \ -clean_list clean_binary program debug gdb-config \ -doxygen dfu flip flip-ee dfu-ee \ No newline at end of file diff --git a/Demos/makefile b/Demos/makefile index 333519f2b4..b53d81cdbb 100644 --- a/Demos/makefile +++ b/Demos/makefile @@ -20,9 +20,6 @@ all: make -C AudioOutput clean make -C AudioOutput all - make -C BluetoothHost clean - make -C BluetoothHost all - make -C CDC clean make -C CDC all @@ -98,7 +95,6 @@ all: %: make -C AudioInput $@ make -C AudioOutput $@ - make -C BluetoothHost $@ make -C CDC $@ make -C CDCHost $@ make -C DualCDC $@ diff --git a/LUFA/ChangeLog.txt b/LUFA/ChangeLog.txt index 325cef122a..6e837f36c5 100644 --- a/LUFA/ChangeLog.txt +++ b/LUFA/ChangeLog.txt @@ -37,6 +37,7 @@ * to Kenneth Clubb) * - Added DataflashManager_WriteBlocks_RAM() and DataflashManager_ReadBlocks_RAM() functions to the MassStorage demo, to allow for easy * interfacing with a FAT library for dataflash file level access + * - Incomplete non-functional BluetoothHost demo removed until it has reached a stable state to prevent confusion * * \section Sec_ChangeLog090209 Version 090209 *