From 17a3dbc1591b6cdd96076b94a9d3648c19f7e2ab Mon Sep 17 00:00:00 2001 From: Olivier Date: Sun, 3 Jul 2016 14:38:03 +0200 Subject: [PATCH 001/124] Integrate mouse keys into function layer, delete mouse layer. --- keyboards/ergodox_ez/keymaps/bepo/keymap.c | 64 +++++----------------- 1 file changed, 13 insertions(+), 51 deletions(-) diff --git a/keyboards/ergodox_ez/keymaps/bepo/keymap.c b/keyboards/ergodox_ez/keymaps/bepo/keymap.c index 921a94d63a..5c127ab78e 100644 --- a/keyboards/ergodox_ez/keymaps/bepo/keymap.c +++ b/keyboards/ergodox_ez/keymaps/bepo/keymap.c @@ -9,7 +9,6 @@ #define AQWER 3 // alted qwerty compat layer #define FNAV 4 // function / navigation keys #define NUM 5 // numeric keypad keys -#define MSE 6 // mouse keys #define KP_00 0 #define CA_Fx 1 @@ -26,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | E_CIRC |A_GRAV| Y | X | . | K | | | | ' | Q | G | H | F | C_CEDIL| * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * |QWERTY| |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * |QWERTY| |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' * | | | L_Num| | CA_Fx| | | * | Space|LShift|------| |------|RShift|Enter | @@ -40,7 +39,7 @@ BP_PERCENT, BP_B, BP_E_ACUTE, BP_P, BP_O, BP_E_GRAVE, KC_BSPC, BP_W, BP_A, BP_U, BP_I, BP_E, BP_COMMA, BP_ECRC, BP_A_GRAVE, BP_Y, BP_X, BP_DOT, BP_K, KC_TAB, TG(QWER), KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, MO(MSE), + KC_ESC, KC_NO, MO(NUM), KC_SPC, KC_LSHIFT, MO(FNAV), // Right hand @@ -63,7 +62,7 @@ MO(FNAV), KC_RSHIFT, KC_ENTER), * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | e | a | y | x | . | k | | | | ' | q | g | h | f | c | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | BEPO | |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * | BEPO | |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' * | | | L_Num| | | | | * | Space|LShift|------| |------|RShift|Enter | @@ -77,7 +76,7 @@ KC_PERCENT, KC_B, KC_E, KC_P, KC_O, KC_E, KC_BSPC, KC_W, KC_A, KC_U, KC_I, KC_E, KC_COMMA, KC_E, KC_A, KC_Y, KC_X, KC_DOT, KC_K, KC_TAB, KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, MO(MSE), + KC_ESC, KC_NO, MO(NUM), KC_SPC, MO(SQWER), MO(FNAV), // Right hand @@ -100,7 +99,7 @@ MO(FNAV), MO(SQWER), KC_ENTER), * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | E | A | Y | X | : | K | | | | ? | Q | G | H | F | C | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | BEPO | |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * | BEPO | |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' * | | | L_Num| | | | | * | Space|LShift|------| |------|RShift|Enter | @@ -114,7 +113,7 @@ KC_GRV, S(KC_B), S(KC_E), S(KC_P), S(KC_O), S(KC_E), KC_TRNS, S(KC_W), S(KC_A), S(KC_U), S(KC_I), S(KC_E), KC_SCOLON, S(KC_E), S(KC_A), S(KC_Y), S(KC_X), KC_COLON, S(KC_K), S(KC_TAB), KC_TRNS, KC_TRNS, S(KC_LGUI), S(KC_LCTL), S(KC_LALT), - KC_TRNS, KC_TRNS, + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, // Right hand @@ -137,7 +136,7 @@ KC_TRNS, KC_TRNS, KC_TRNS), * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | e | \ | { | } | . | ~ | | | | ' | q | g | h | f | c | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | BEPO | |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * | BEPO | |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' * | | | L_Num| | | | | * | _ |LShift|------| |------|RShift|Enter | @@ -151,7 +150,7 @@ KC_PERCENT, KC_PIPE, KC_E, KC_AMPR, KC_O, KC_E, KC_BSPC, KC_W, KC_A, KC_U, KC_I, RALT(KC_5), KC_COMMA, KC_E, KC_BSLASH, KC_LCBR, KC_RCBR, KC_DOT, KC_TILDE, KC_TAB, KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, MO(MSE), + KC_ESC, KC_NO, MO(NUM), KC_UNDS, MO(SQWER), MO(FNAV), // Right hand @@ -168,9 +167,9 @@ MO(FNAV), MO(SQWER), KC_ENTER), * ,--------------------------------------------------. ,--------------------------------------------------. * | | F1 | F2 | F3 | F4 | F5 |VolMut| | | F6 | F7 | F8 | F9 | F10 | | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | |VolDwn| | | PgUp | Home | Up | End | F11 | | + * | | Next |LClick| Up |RClick| WhUp |VolDwn| | | PgUp | Home | Up | End | F11 | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | |------| |------| PgDn | Left | Down | Right| F12 | | + * | | Prev | Left | Down | Right|WhDown|------| |------| PgDn | Left | Down | Right| F12 | | * |--------+------+------+------+------+------| VolUp| | |------+------+------+------+------+--------| * | | Undo | Cut | Copy | Paste| | | | | | | | | | | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' @@ -184,8 +183,8 @@ MO(FNAV), MO(SQWER), KC_ENTER), [FNAV] = KEYMAP( // Left hand KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MUTE, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLU, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_MS_BTN5, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_MS_WH_UP, KC_VOLU, +KC_NO, KC_MS_BTN4, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_WH_DOWN, KC_NO, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_NO, KC_VOLD, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, @@ -236,44 +235,7 @@ KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_KP_0, M(KP_00), KC_KP_COMMA, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, -KC_NO, KC_TRNS, KC_KP_ENTER), -/* Keymap 6: mouse layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | | | | | |LClick| Up |RClick| WhUp | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | |------| |------| | Left | Down | Right|WhDown| | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | | | | | - * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | | | | | | | | | | | | | | | | | | - * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -[MSE] = KEYMAP( -// Left hand -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, -KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, - KC_NO, KC_TRNS, - KC_NO, - KC_NO, KC_TRNS, KC_NO, -// Right hand - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_MS_WH_UP, KC_NO, - KC_NO, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_WH_DOWN, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, -KC_NO, KC_NO, -KC_NO, -KC_NO, KC_TRNS, KC_NO) +KC_NO, KC_TRNS, KC_KP_ENTER) }; const uint16_t PROGMEM fn_actions[] = { From 9aceaaed4cbdf49c12db85cf3ff40a9e762558a6 Mon Sep 17 00:00:00 2001 From: Olivier Date: Sun, 3 Jul 2016 15:51:55 +0200 Subject: [PATCH 002/124] Replace the "Ctrl+Alt+Fx" macro I was using to switch terminals without moving hands by a numeric layer switch key like on the left half, for consistency. --- keyboards/ergodox_ez/keymaps/bepo/keymap.c | 54 +++++++++------------- 1 file changed, 22 insertions(+), 32 deletions(-) diff --git a/keyboards/ergodox_ez/keymaps/bepo/keymap.c b/keyboards/ergodox_ez/keymaps/bepo/keymap.c index 5c127ab78e..dd47357998 100644 --- a/keyboards/ergodox_ez/keymaps/bepo/keymap.c +++ b/keyboards/ergodox_ez/keymaps/bepo/keymap.c @@ -11,7 +11,6 @@ #define NUM 5 // numeric keypad keys #define KP_00 0 -#define CA_Fx 1 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Base layer @@ -27,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' * |QWERTY| |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | CA_Fx| | | + * | | | L_Num| | L_Num| | | * | Space|LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' @@ -39,7 +38,7 @@ BP_PERCENT, BP_B, BP_E_ACUTE, BP_P, BP_O, BP_E_GRAVE, KC_BSPC, BP_W, BP_A, BP_U, BP_I, BP_E, BP_COMMA, BP_ECRC, BP_A_GRAVE, BP_Y, BP_X, BP_DOT, BP_K, KC_TAB, TG(QWER), KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, KC_NO, + KC_ESC, KC_TRNS, MO(NUM), KC_SPC, KC_LSHIFT, MO(FNAV), // Right hand @@ -48,8 +47,8 @@ TG(QWER), KC_NO, KC_LGUI, KC_LCTL, KC_LALT, BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, KC_NUMLOCK, BP_APOS, BP_Q, BP_G, BP_H, BP_F, BP_CCED, BP_ALGR, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -KC_NO, KC_INS, -M(CA_Fx), +KC_TRNS, KC_INS, +MO(NUM), MO(FNAV), KC_RSHIFT, KC_ENTER), /* Keymap 1: QWERTY system compatibility layer * @@ -64,7 +63,7 @@ MO(FNAV), KC_RSHIFT, KC_ENTER), * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' * | BEPO | |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | | | | + * | | | L_Num| | L_Num| | | * | Space|LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' @@ -76,7 +75,7 @@ KC_PERCENT, KC_B, KC_E, KC_P, KC_O, KC_E, KC_BSPC, KC_W, KC_A, KC_U, KC_I, KC_E, KC_COMMA, KC_E, KC_A, KC_Y, KC_X, KC_DOT, KC_K, KC_TAB, KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, KC_NO, + KC_ESC, KC_TRNS, MO(NUM), KC_SPC, MO(SQWER), MO(FNAV), // Right hand @@ -85,8 +84,8 @@ KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, MO(AQWER), KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -KC_NO, KC_INS, -KC_TRNS, +KC_TRNS, KC_INS, +MO(NUM), MO(FNAV), MO(SQWER), KC_ENTER), /* Keymap 2: QWERTY shifted system compatibility layer * @@ -101,7 +100,7 @@ MO(FNAV), MO(SQWER), KC_ENTER), * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' * | BEPO | |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | | | | + * | | | L_Num| | L_Num| | | * | Space|LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' @@ -113,7 +112,7 @@ KC_GRV, S(KC_B), S(KC_E), S(KC_P), S(KC_O), S(KC_E), KC_TRNS, S(KC_W), S(KC_A), S(KC_U), S(KC_I), S(KC_E), KC_SCOLON, S(KC_E), S(KC_A), S(KC_Y), S(KC_X), KC_COLON, S(KC_K), S(KC_TAB), KC_TRNS, KC_TRNS, S(KC_LGUI), S(KC_LCTL), S(KC_LALT), - KC_TRNS, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, // Right hand @@ -138,7 +137,7 @@ KC_TRNS, KC_TRNS, KC_TRNS), * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' * | BEPO | |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | | | | + * | | | L_Num| | L_Num| | | * | _ |LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' @@ -150,7 +149,7 @@ KC_PERCENT, KC_PIPE, KC_E, KC_AMPR, KC_O, KC_E, KC_BSPC, KC_W, KC_A, KC_U, KC_I, RALT(KC_5), KC_COMMA, KC_E, KC_BSLASH, KC_LCBR, KC_RCBR, KC_DOT, KC_TILDE, KC_TAB, KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, KC_NO, + KC_ESC, KC_TRNS, MO(NUM), KC_UNDS, MO(SQWER), MO(FNAV), // Right hand @@ -159,8 +158,8 @@ KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, KC_TRNS, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -KC_NO, KC_INS, -KC_TRNS, +KC_TRNS, KC_INS, +MO(NUM), MO(FNAV), MO(SQWER), KC_ENTER), /* Keymap 4: function / navigation layer * @@ -187,8 +186,8 @@ KC_NO, KC_MS_BTN5, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_MS_WH_UP, KC_VOLU, KC_NO, KC_MS_BTN4, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_WH_DOWN, KC_NO, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_NO, KC_VOLD, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, - KC_NO, KC_NO, - KC_NO, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, // Right hand KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_NO, @@ -196,7 +195,7 @@ KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDOWN, KC_LEFT, KC_DOWN, KC_RIGHT, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, -KC_NO, KC_NO, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO), /* Keymap 5: numeric layer, sends keypad codes @@ -224,18 +223,18 @@ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, - KC_NO, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, - KC_NO, KC_TRNS, KC_NO, + KC_NO, KC_TRNS, KC_TRNS, // Right hand KC_NO, KC_NO, KC_KP_PLUS, KC_KP_MINUS, KC_KP_SLASH, KC_KP_ASTERISK, KC_NO, KC_NO, KC_NO, KC_KP_7, KC_KP_8, KC_KP_9, KC_NO, KC_NO, KC_NO, KC_KP_4, KC_KP_5, KC_KP_6, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_1, KC_KP_2, KC_KP_3, KC_NO, KC_NO, KC_KP_0, M(KP_00), KC_KP_COMMA, KC_NO, KC_NO, -KC_NO, KC_NO, -KC_NO, -KC_NO, KC_TRNS, KC_KP_ENTER) +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, KC_TRNS, KC_KP_ENTER) }; const uint16_t PROGMEM fn_actions[] = { @@ -251,15 +250,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return MACRO( U(KP_0), END ); } break; - case CA_Fx: - if (record->event.pressed) { - layer_on(FNAV); - return MACRO( D(LALT), D(LCTL), END ); - } else { - layer_off(FNAV); - return MACRO( U(LCTL), U(LALT), END ); - } - break; } return MACRO_NONE; }; From 6d195dc60c696d2e07bfe7d098b00598f36fe5a6 Mon Sep 17 00:00:00 2001 From: Olivier Date: Sun, 3 Jul 2016 16:27:08 +0200 Subject: [PATCH 003/124] Add a Makefile for the keymap to disable command mode (to keep the keyboard from going into command mode when both Shift keys are hold at the same time) and to allow issuing a simple "make" in the keymap folder to compile it. --- keyboards/ergodox_ez/keymaps/bepo/Makefile | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 keyboards/ergodox_ez/keymaps/bepo/Makefile diff --git a/keyboards/ergodox_ez/keymaps/bepo/Makefile b/keyboards/ergodox_ez/keymaps/bepo/Makefile new file mode 100644 index 0000000000..b673c5ce52 --- /dev/null +++ b/keyboards/ergodox_ez/keymaps/bepo/Makefile @@ -0,0 +1,9 @@ +# Having a file like this allows you to override Makefile definitions +# for your own particular keymap + +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +COMMAND_ENABLE = no # Commands for debug and configuration + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif From 82edc37238a0f4239da0a6eee74d62773362a2d2 Mon Sep 17 00:00:00 2001 From: Olivier Date: Sun, 3 Jul 2016 16:44:57 +0200 Subject: [PATCH 004/124] Move Escape and Insert keys, Escape is now easier to reach (useful for vi). Change the layer switching used to keep a bepo layout on US keyboards. --- keyboards/ergodox_ez/keymaps/bepo/bepo.png | Bin 79747 -> 80838 bytes keyboards/ergodox_ez/keymaps/bepo/keymap.c | 28 ++++++++++---------- keyboards/ergodox_ez/keymaps/bepo/readme.md | 2 +- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/keyboards/ergodox_ez/keymaps/bepo/bepo.png b/keyboards/ergodox_ez/keymaps/bepo/bepo.png index 3df7aa609f6300a48c36425320323935aeb435e3..bde2e2cfacb326e7934c5743aea2f303c8a42527 100644 GIT binary patch literal 80838 zcmb@ucR1Jm`v%+)%81N_jGIdKCK6?2lw|XzrWw_IgaO#=RP`)ZsGHOzt(k~*Lj}T%U}M1B;Eyz3#U$RM9hlkJLUv;4 z{`o9yF`*yR(+N2_YdvQj9UXZ#*RlTNNrGbVbZZ+Myo&}#MjLKi|Gu`UU*NZI(m#Iu zI1u3^{rA&6=7 zh6#I-^18`D{yH%>9^Ulfj?~F)>B^)S(PO(IAN`${pP&5Mvu6W^rer-PJY8K~_q?S) z)n=i}#%E@H%!i8BkM{pMd8eFnJ^6$f?yqz25SSBCQ{(gT@%_cf_*2UaEiEQ?W_WlQ z{;_R;HT?J6{(b^2@`O7H@;a-d6)czBOiY**nMgh+CR)w3Toxs~awX7awvCpDr?B32 zbub_6g15)c*v;R=iUXpI=@}Ut7Ai#6 zs?U}mYn?y&of0o6UXO7ynEAF&lS02&uNs=(ToZ>$@Q_F}PX1I#X9q7kiu1@hR=~zb zDKt!>{A4s}B-?EIgs zo&(R!gSNT?4holoWb)}J5`E&*Y3q~D)X2W^>IgNtSY2ck7!>rSBjGNKu!faYZmTn| zk|qnOY)FYCfde{lgqOVHWt- z`FJU5+>>=Y^}E&@mlx?6dL7ny_iijP88b zC*I{jrkg=)SED_@tXbZ4d-g7b|-1vi}W`dHZVG~{Kr*(;+(znr&ExGM3x}g$v*zFP5A9GPYD6|H{p%cs zs=QS%oOn;Sob%B5s!GG3P-s9+MTPgK>5H?6Y4G-|-TAMxTND%&uR}v$)(4X5Z_Kpv zvM9)r2OAoUaq8?hGGLEr)S#vA^JuxWpG9^wfuO?j>48l%9v&V`8=Ja`I^WQkm_W6B z!-=|!A_d0n$||O{E$gLzM^mf;ffQ?<@AO>ul?1lT&P3s06vOeh^ibq$nfJ^3`c+Ek zV6Bdv`zZm$TY*wO)A;_tUsGArcHw!XZ{pfTs{>1~v*;c>3a2(Kj&eBu{Ba-S+&SbS z#3VyS=5??F8t+XNdc_I6xL=#R3JYUJ=EKf)qm|Fn*4FFI8zM|x@)u!YmtuCzs;Dx3 z;)SlTy=timvMNov{y8pqRa4yZA{?x1Qatl^ijfaK-+lV@dU-{Kz)c17OjR9nOw5YQ zRmbYVe6ur;L(|e~d(%}WCMHhX+uLWT=AJR_&mtj#nQwSadzal|O-HlBsh6`cDJ_r& z+nA=8l0h7WOwyb}sv`Mq7k*AIu7vLSwGsQV!E&Rru#a_%`5U1&ji)?EgWeGKJCOGTM@U#Wq4Viq>4B@|;sh9cQaqCPl_C|LPw}FQ zo{a?9E%vEp$uSa9yR3;mP-ZFU%lCHG@UJNQw(9s0lc?P0U8Z_YBg{|vpZUp=bE-Pr zj+yq0C)0KzbU)l8yXK#sN$)nPPZ6>k%`4$qD03myRioWFG$1I*3tmQAT3UxQI!C_| zzkID0Cw4whIZ5%GdO63nt0dDBQL?yhN0pb-Npr`_a}&jxgoUXN_qL`oItoa#8CMR> zt9u^3BRwu+K{ZFP+||+f(A)o5LE&{&)OG%_u&|7kcd-!>KGoHCGSu=V^3c0&8W^IM zo{Bba74358Pd{HB#gmk5B>jtlVK4)We@~y`;Kv|KiJMxZn#Bf8X>DEIS(Pl!nvpX5 zT>Dim+{>I8hWXJ%s6MA6oHW4}cY&+!MwjKajT*9j(+PGJs9Ox5ITz_SzS5oRNI+v43JgejTsrCVX9y=(JSO+H7X5;Q3(-?HkOTI%mv5?}TxMB3Xi7xW z1f0?y!F|Q6{!*XFix>t4g*S<7{yJDBFegY55 z%F60GE9;CfV`f6HNrEC%CU3SmRRY8Fe@Fan)V8p92+4}`^YgL8S7Qzn$$e^O?9_)R zc28@j*ednIet$XL9I26Ye6(*N^y|kP-r)Ywv*823j8mrtAL>^RH#uh5t-mkEUI8F7 zj!`6e@HRYLEvr3FIM68GwJ-T5>4J$|O4`9JmzgoyqIuqdte<7VO?vvX)}@ri&qfw_ z^=bDbsI#$%X+-*~qjPCC>7!*Ci2%PWKOlqYpuv6yaV?JzmAS<${pr$8<&5#AqXBZ9 z8%VS-LtS8u)M`+nUZCrJ$Ov}R7XyuOwfX1Ev<%J4`TUWzC4RHxw}3U zOOjgj>Irwu<-fl4>dkm*#s+47qN^8+?0otqibMZ{LaMx?;+N7~9TqJ{BG2$_l5yz( z{3o9z+JeqG`$cA!_J5d?CL7!GhG7thy$Ul~nbv?`^$H2O2(Vh9ta#gr_lUS_ zQDZ+7q9&i9`TnlP8{_ly{u{IHHtI?0HdX0Na@gwG^`=}KR?BgCFH)omGZ)jdD{H?O zn%1xf$pxJ=T^HPbOj3E2VWos~8K<_Z(ERcFo>`4&7*BZlcwfHnthW!Q#rC-3^*S-> zo%650@Te%iNG&J-Zf8@A`r2M@s!?q(CXx|?R4tKZKC^XD$dw_s`9CdbKRdW($Udn;7f53 z5)z({mc7i|n|B#if_FfN z-Q`U~jLd#sF0vpAuG_~+#Ni~F*@g(hPYNNheyeE1HiquY)((N%z}m@T`7+M_^YE$7 zCW`dzN97rdX{o8Ak2*yRTVR1{BAd-AveD{9-=vRIkC9~+rim|PO@%Qkk;SOfsOsx} zdwWB*%B?~vw5h4dFC;`#Q#1Ah^0&2hUa#|LfiY3?!+2I0a@c5g)lmQ}`Nzu2%F9K= z`V(fhED`1Erz+Zpalh*)=%dl5^|ciP*7dcponxrtd2D86+iVM;|JD7j-n;cx`<|s7 z$1K_`Sk$6n#x8iqL(8b4an*R@T00{QY>6`AM@n0@_)2SATSL@@ z=QzsUXtAg+lL=%u55i0*C86Vs*_XqI;}hq!a07}otB?b?~PTuGNcE}bqy65zv<-)y~)I6 z7O}Z~TwJ>l{gtQJmg%0P?fq6&OMCmqOpRjZ#-~<}eKw}(8QE`l-Lh(|gOnxPoJhO) zWgleJCC%F8{OCQ?>_Ugk#1-1lorl+)TQ5+)EA7K+w*OO+7~K;7>ml9 z>X&ENdmcZWmopA8?f%3qeM1$M?Si zf`i4Clt``-)sreJDymY+E;C@IF62cTu-=o3v_oxeZCO5lK4b8y<*-26WlN9?Hu1a6 zw}htUZnxA&YE$U{9?nYE4Kh~EYMXXpqf%aS+!DLR2su;fJrb&j^1b%34IfOdpEmQV z5?u^Jf{8L|?f3Nh>yt_S+EfYl{+itLyP80wgu=bsG(2j1xYe(1X=PROHI#k=cF6rV zj1x1hF|orMrgA#l=EBLrojOhF=T0(XBq=SQWUL$wpia@@kk{6V_Wf_qV&Ut|v_vB* zY^{Z>U8gTY4f21HoawjtP@Y}bpB^GiHR;_y5gbhn=oyXSM{IY0E7~uRzP3sA!~J_` zsYukkLV9nMpdHh*(em>ZS|K5~_psqaAnzc_`9!l@_b@<$t44>N{zv)+W;|wsC*^NH zuTHj>{(^|A&q3POSbX&85~NGdOJj9x40)j!WoX51K|VoMN%w;-4^X_sg?gU8z?j$Tq%L7}LeHs@aE<>j%C zU5TlnC--^zz^H*g+e}f3!aTXT?Nb}e69O2tb}-+FrC;zp{>9t7G$tk)SIv6~)lJW2YxmJE>s3sD|G=m3VUNFHQa^&B ztVEIPqI$p2};U(>NDi+kAdPo8Jga>m{jTS6^SR zTm9nn*RNk+bUwXjX=$0CoO83F4Zr!8M&2*-UM_>%}2JMl9H+$8?nw};#R{U_TSrc z>RTNfoQ-R-6&`&T8FG2bI@i_a#wKO_k5Aq6Ikxi(8JeY+YHDiA8~uZS&xHqIfD0Ec zAoY+gzc&o+pe$`ocN&E=Sy-heD`!2FuErq(-)t?J-Xh{zE? zf^OkIQan>5V^cRONR)#_Hpo=)R-}vj7rnGWx#%zVAXr>%&z47W8JM4kLhBf@@85Hn z^jwFc`=u^9Kw|w`uk#4PfMQ8QlMB}qco4lWeuU)wmNaM1o(+xccTk*wDr0FLv_cL6%9Rk<6*IYY@Ed<&?Jg~ir^k|J{5I1_J(@d!P)sP^?>Za6|<97xWbgbbYduve^=i@2f$!yVz2;qmbouU)(LH!v@? zW>C&lKj&l2P3p9>5=?dL`3E!_U2k{){&`IlD)ja1Q=T<1g0Jw^j*X4|%rDcg_mHPW zcDAjOikTU6d3iZ=|7?4FW7W|X8*GH=**F=ph4qG5_g6L*&((arxqb@th6A?%^)vmo zYgjM`=I`Rg{E<{|q7O>}l{3j3M!7R}?BraAxJHr(YXbf&(?Dn}^6Dq}1Bub3N`vz7 zw!JS&HfHAoU~*3SRa$m-aRx#4XtbXFKt6vtrjof;ng4f+F#1VG#iJK&5Nh6YmIu9B2KBxz0p@B*HC*Tu`Wear$uH@zO{j3!p+tvO=C3vjiEb z*Q{L(7)y`-eMwG=;DI9ZD-y3L&ueRI%SN#$MCY=*>{>SOjJi`%QsTnvex3el_%%lR8pV?It_RQlxn3*>GXFU_Ug_~LM5doUdiPaoA!wu>7|2$9_x_~9iRAEUdbnq zaqgKjV_;zDbbJs+I22fjj&v0^*dmD~C8{~1gdVwfZjzSt7dr1e8*QYj541f``1?#S zNQ&RPSKZu<12i=799S2r%?z2pPFtV6*riJz3^Ea_S-}$Yz*?|e;SYnHBNbU<2Sum) z&(n3>S*k$z@@nU<&HK1-3jtfEd*El*roxO(SjI~V1r!i#R_l}E2kVVjTLS{+J;fS4 z*2cy9qq&U6mzRTY*{`f+`A&+XcRv*3vBT10&v%DY78Rqw z)a)JJ+8DN(7lUxL(;jzWUd1lzn6ucK8JnbxkJJaBDj*=>g3DH~3UX#vPfs}I0RIx_ z0EbPKHF64SSd`J}V+3VqjoUu>Y=*>ieyafAX3w!%jqaxGuyUB*;hv zQ+Q7`hSWhQ4Gj%lroaJE^rPv`+UDlH`VchnQ{MXaXG(I3Bmy;3n2c;{I#Rm` z9pEwf#2xK+xTS*Ztc(m?C|t$jZ@az@5AV&&rFqlzIxOsrkFMqJnl5aiDA{CQ?J{@Y z?Ny1f7%R!B&QfRM1Jj53jO8Fmw{0!dA|IvbyXu( z5yS}9An)$a4k=r1V6u5SeNp*=DII!LaQuE4 zJQi5v;^7_GCy$hsed68r&P#vlGDL4L5BWw#k!$JM9343F3kc|beND@aueQKRjyq6l za}CJ?xYR=A+Aizopg_aXrxg$=g?L~wT5c%P2m#&S-`~9Q`7!=7Rd2ohd!&-QzH{MX z*OT~@PfkkuYjjJ#Jn1vwV94m0SLP@0oJ8M>iWt|THx?xwO4`~Xz*mG8>ua{hi-Z6) z@8Vy2kp)>Fn0WGFiNCI0)8Ad2;CDOVZ-ehc<)K>1#>tr%o%=!lI&=1ATuh;#U+Dn` zE5~H3?U&m~+ODIFusy~xv#c$|#m_+|&~Ookx}2Jt`fFQTk&8KOI&vWgc4-+I+BZ!f z6q&51zme?j?fndM_Qssgdx(Of(yR0757fna87K5W&lyhAr#b7%GM^MC06u-}At53< zTcKs~>vEa>s>Gv5gsbZBI_7Qt{Qc*x%PSAJHCzB!m(SDaCrqKAuMGP`>7JOJj7dU5 zLe67Cj8xDNDJOu42NgvWpe8UGT`j7>`+k9=i=Wu(w>(r_H#9Vq*C=M1Jz~KOTwFqV zd2HdIET|)+Ut`8Qb+|Jo`QX8W{Oq!lk`Dz1>lwdb7eV-p3Od(SpJqfvp}A%D(Zr5Xv*yQ z?$1--!f%!v(;`D*Vq#*4ny;j!q`J44q&bq!S1a4M$)FZ~0x2G#l${*N)pwW*=Bs88 zZm2CV?q-LQRcLQ6kzClxHvciLy7RJ|eoa$TYQ1nMC}mxr^Go~9c=dNyMjR&nuOY;o z{%qU()*$cy31=d)e013%U~SHIo;^O=sd}WYe&OQ9iw7_T2FwFek;TRK#bd`aA|f-g zkrkU}B8QtqA3uIXqdc=jeRt^k#l||i$`gJuPyrYLIf{D#jp~PUi-d}&h2Ni*TD*VY z3mM*1m;6g(;}jqhRA2bJcL82r7+)G1CLx-8&@nP%GKGIzaJA>wdMLc5m|k{hk7dAY z8(xmR$uyYefJ_7LnTeZk2-7DGe-cjIE^1trqkZd@Elx*1XZ8ItMqmEbrW+N7V{4fa2B_JjB zfe5Uw)je+ub!XAiue%LmJM)*ya%l_)8WvYZ${ZFmiyf}ob5|unVSaLUHHsJZR?1e{ zLC|=1cykwsD9iEc(~xFDb30x-D5eMDBx%F2Q;*!uLl%FCd0Lkr(pS_%%@-p9r=AIC>W8|OP$?x;2}NRItjQkCGS zmx!Rbk--xyg>g0I0{pp{#SroJ!KLtrk-x%La&ec`;1PtmDkdgIg_|Ipsa_FyK z_1=YCVEN-Kq1J5INAW-?iMp29?6#x$euvMyMm9ZVtCd5{7q!r~O?u2gz3DWCF+}tS zoqz~k-k2KpT5eJ(1reR?9AMw zbwlSR^P~tV$)dl#00;?i68zZEP@0~;diCm$+1Wsa$f$X#a$tmBrK@EBB)y_Rjsq+< zV2B@w{K@0vI-H~!@}}4xbAs<%AFZ#iBT(ttaLG$FTCgQf_zF}pr|Q_hHZ{FWPrnJY zH!fh^c9G*@>oB~!94^v~_ln)2l)Z!~O?pzExzEw- zi&EtHN7m>(-Of!|kr?~XSk^d}(0YX->(5Ka$l2WpmqsXyLq{?GXL*oGb8~Yu7pyHU zpW1!a;`peXJ^?bIpw{vJ*zwxf@lj;)?yv=O0U2A-#^RfYx97JRJa_J%Y(!cT!I(rq zqLq6KH%rROreIe{NJ(KQKX`BAc=%rsB4nu8LPJYmpIP-*YBIe*KxWq5+|%C(v82A8 zk0LngmOU#evnoy0@KAJ|95!ganGW|0i$l|(P3$$H~j5ejBsi1@^T>{x6cRE z){4d6vd0JRl<7EZ3v}90_Al3D`)S2r=`-FI)!2skvTgUA-{0vG`aslhVknqopLK6c@hcmU( zM_-g`L?lABJm`fHDI7zP5Z5Ybz}%sepPE%rzzunA3a~m9uSCSKyiyMyJlm?g>M(wq zQpkY-_$TlbE&wV$5}4_mP@&wu zeY?Ev8Yd}Wa_m&l^6Dk}f06C}>pT1`*cfu)!H-yTAEzoJ_!IFpP*M)h z99-g}iq;1F3*=z=NyX@q<4t}bKgPIJKBgph9alc)6Wl^U3RKb$OrebM^F$h zJMLL;vD1a>EKgB-K2E$=w9}&!pyd2cw}Xn2QKj~m0J#H1`k<1nMOvW;JfiM!i52$6 zix&27{?V^m*xoc@kdcvbb91lp#>1EqO4mcthWH8!GILR^(DdqR2t;QJfTvJwHC7!T zS^$Uy4}$)|?s^0fi&vUV3+x-#q~Rf{69U&sA5^c&&H3&qUh{V}56H*$at_z(E=CDC zazZ8_T#h-k%#>*vzU7ZkErjhYraO2~QueC>C+r?CA0LI#JrQmSJhn2;F<{xjd*G!A z8i-!vBG4wt(Pg@MGZYj+-8!F|_V$a~?uR^auG?xsQsdjFwHDrh@S~ev+n=F`>}S{%E=5+V*w>92E5y z4vuL&2vVv^EAFS_c}yefo6rvHbUqiavd(?T=?ssK_HVzvk9+_A{Q+RaR-Fds7KV!1 z-byp9`Ul*6EB)z7H{~CzjN3yL11;@oaNEGBBF)OxW3)jwg1ROm_W)wVB-F6wZJ(Wk zy}`Yt%ok&F(_%PV=4rv-v>V98xxGp#R50xHsnXdvL|}iUsOYt{Waj1TOV7pi*b@EQ z7lQwNad5?zku#=scXuje9Tb~MKwUG!M%}3dGAxjkoLp40D(t)s z{vIh_t;|-oLUp`P3jQ}$vS@%rPm~C*h2{6Y!uM>g0Xfglm(?|^+^9G>I7%GW^?WxP zD$u(QWHeXyHQm3N4p)abjZPHEIH9Dl_1)T=zCb zRaMDX&!?wT3Rq*nmo;FjfXJ?6cLUY^pic1ptDTZz1R+B4ld<9x3-k(zeuEB$g_`UP z4Cjz#2GXF&Y|sND)+qQvE+C~t`Tj~7zx$C8{E~Xb>UKmX@BHNB5T1d#KUJ1O>m!9; zhF)qgdQ8+M8xhrVh5nRaZZn9(tYi1vTYUKC*fnB{i|`6cO-&6p-ZN2UWzuZ)@^{4N zP*_;FI}>ApR7ObM0=S;{(A(L;LG{T9+AbE4SEKtKrYY_f-k>d=KtI11`T1PHk0JWG zm$$b+68Br;MXuuGqx zQrhkXcTs}~m475b(7D7xzYd(SiTtQ#Y?&i!37d_nChwz+ezm3Vswo*6_fV+!(}@J` z$A^4CPPOjO{#tU(K>=k1>+S{KBPi#Ym|R?3a**Y(a4H0lo&t5!%bpkw51KC_C(Zz# z`c^H(OSLO$w$2$XxBH07=lGsQ-9s{Wucl!aB6VlCK2w}WS8!nDbx=MsH+TRd{~+pV zxxZ~*gDL*aQ!c$%Z!qr(@E(Yn!^PEAydG>HTX-xYIr&ElkuIAR?TuHw4`8WVLu3fIFi?RE+;_S)?p7pRrHfvNj8fH^n z_FbkG)Taf6jOm%cF=u7vFcWRGHe^vnOG9&Nu|K;J#05v;?_YI5*o_4im9{I6HB&hd zC;&YGZhip)lNFZ#!_Y-y+qEcdom1@Ke>s(}7(>+WDkNMGN{Xppgv2d_PIknvbyry9 z+9boa5nbv6kmvV|m;t-<4Gl~J%X;U|ol}Ut3V6StZcO(K4H+k=rfvxhtn@Q*fA1#w z|KJBJMWa80dj%#9{y6N-e_jW=cby`?DB!K)RBy3`_Pu-e*0h95nQH-qz0UXp{1NYr z(usFw+YC}+MBFlBwt~n-c=c+#+OZuknsiFipzdK@@Z+jnF0!Ruqc;m&q2T^VJ@=7| z6pjbrR;+O8a}X;E)q@d>Tb%Habt~C#OIYSg!%&}2ezMHr6BC`Z`rsNQ!L9pHSxH@Ww0AQ$HWutrH5wjI(-9+-X{0r>bE8(zplgrNw2IN zp=AFcQ@O6DCgE{|7}4nHDF5@ND4O7N;FSV(A1RV~%?7G9rW!~@MMc+s{)9R?^nXpV zpguEquH%Lwvue(Z{C(jq4Ltlq`TNMO2#;V~`Fmd&Gy9R;aM#M_L3MU^majN=QZG}j zcVE^Q&F-H9xCt(l+CtNQhwi@U;3r?Gvq3V_EO#ITq5u&Z!83z|=0~{@lmV>PH8-aZ zt~CAY+WLsNwon|TP%W=zyB`MTJ5P71o^0D2i+Yc-5JkuEF-mXjM-F|1ShiNh_>UhL zpu99*b*J3lUM8wwrL8q=RENU=A$E6vUmxn*k9t3UG(j2d+gpBJ356jlbr#wB^I;|z zJ4p0txwwcx{f-?mvM0w;2#$;j&12=|`Ga+PmAh_1F$9u;<6-)3m8RkElC--G)Pagh zN>c*ua_%VgT)lIv?ko!}+K~tVg9?~$KRsH}ju3+u4_W#YWa(8@m~p8D-{$YXeV41l z9;M4&RH<^$>d{#v^p~Kwuv5=^@Q|wS3x!4*FWM;RC3D@+E-$A9BI$;S$-vcm`X6-S z4Ib>a#@rMRj*hg~ulwydc9H;}06F2z!-o%_a#J+@O|Jb8`(D)J#fb=mO{)FuX8yMc z_Qi|SMVzEa4*9h)Ym@xYq(Kan$VzNh(_YP8>zJ*_zXbE`y-r46cqgX;{E@!BRPy!G zkhq91cpKQ+ZL2mgf=Q!{Mc_MKw9KF?QvR_&Us6R7G)TZ#-F9hBOijDW15HmMt0mGKSEs~Gt!4T*!k#{_$refFI(}VEhfWUbd zt2ncZpRw9DsJ{L?2Efb~S&Y4!jdOmrqs<8Xy0zI@B`Oas`16z-@KdAI(&kD@NhZuL zV3Ty%9yB5(BJzYXAGq4_a22f@P=m2NYiRgU5R$+rs~Ff1^A1p}tGn9@Br{Q~!#z9T zGt}*h6F+|JfEf1QD^Z_}1>Bef>{5BXDDO15a#92~RE`+8gR-B#9Um;Q=E%d*h$Hgn>4SB-@ThyDz7-OOX$}I z`_+{(3@Oc!MN>|%_c({cZrDPeejmjQHZR#&enL=J!up=9Hh2)sr)9;)QiA*ez%75U zohMp$ZEI`V+~!-`TtHypT`Mb&RSsjkOl6!;3WJlCL$|{2Fa3*@-d4<`tBM^byvYE# zi>PL`zrW=Rf%4l?YJBKIRO|Bbt%bpi#RXQ-awuB8Q5siTz3H(i zL{>T>K!9$p&|8mLLxCgrQmx4BGI-7cft;=G?^jX8y?UDxPy^x%D^Sl&vIDw92%WYF z)DdEW?Tx3Rpa{6kW#}gn*%4yE87&LW>7rY}hmimFtATrKWNgR<%$}`#FTm0W6#-uC zu>PA|0;`k@V7u5@x5FM8sw}-D9Ak$XF=l3O5t*q)PmAkBwOz(hQtEPH49m;fCMd|2 zSL!XfvWm7_9G{x*y-?;H|(5wL}cYm2kRx4|Fxdt)E=+2*of%ms| z$5wvwir|Z`PmZaUfbruRecJj;7ad69p{~sx#`+0q(oQgQ{k^0fyri!v1a|*!WgE^DT+)`4q|~_Nf|3C$`3%KETgCNr?3oGPEthTMl2L_P}Fc! z$mPeI^2TsH`9_SK+qY=1fC1YlV_h0Yc}XlLcfP8S>~bX4=7kbn`9q9}`Uyx&m+~## z!)tJS0;r(%yXLrb|3i^O40m^TFfQnJC(Feeo3tW0cV5MIclv|fdp$q0t5Y3)4YlFK zRAA@IP`a(D@7f+(WDBkesgv3n_Uq$h*&3kuGXrEFJdkj45t^Kw#1MzS;Rs}oZh$X= z-F45lX#unW2g`&-I3$Si6^QkVz=MLur2~Nxl$;;SU+-rHL`eMF6yQ%BPRF;*IUV^2Xa3VgYA!< z96hTl0gI}p<`04jIk>H6Hu)uPPchu{dd55;_McuEkY+Mgo;pv|o`dN}IID~dS$QDL z=%GY}DuZPOl#`DZW0hgOy`fm>WO}z120A*i*Z14w0*OK8d%zEgkodwmm;_{_PXKrm zS0dS;juPt;$5ff!b<;lg+(jXvDS#4jaLoH$0;n^PQdZ)UN?A8UJYnODMcg3{4zq zOh?ov-y!1GF6fxB2}mhL3jbvTmXoilVx18tqX_YILUu28iy!%M>Zt>hDx+IxBbkd&eU(XS( zeJyj6Lg!9^dL;M+wm%03oqGlo57{B) z?oC)DKJB-~yNJ;j+(tZL^jVRUk(pY?HoVbG3}Wv0uHKH0Q<9RB#3UrSZpZU(rR02c zSEg1co`?ib+vP{s{5*H=YpMRzb&DaV%ycvW1Pw~Z(L~9Mkm+!EwP5w0274!;2A?|` zACJ8fOg8!n^UU8N6*6m<5CF|Lxs`HN+6n9nmQR>Faz792a~HKdME2??q0Fm1rIoGC z&4OPu!P}~jVcyY^Z4@}}Mups%K=MJjcy7+(9WPYo?by+0S_Jma?8cNwi8&w$)-(Xk zOHi0gqgZkxg1^6IkBISewt}4tmza=sI1TIYTh{}eC>6OzgW66HG}WK5RAs0fR>nLI z6<}%cEYivsFCTS3c0~v+sG>cB!6tF1!Q<4m&cg;V$k`sAo(PbBw0Mb0uLox81>cwp z5wM&Hs|Bueh6I_kbvhI>oVQSf(xGbaW}p?UALmT$T+HEg5vU9p3r^dcxndQdq+;Iy zk3TV3WWK{PuW0y`_4xCH1PBNos$2KqkrPfK-r)5{YB;~3AmT#S1Ud;6DAkZye8B-M zdDYdxE}M{J0osP7;CNurKKVT`g2XHn6i)=TGmf!iYDs!kpzC?(HCOADIXgT1@{;fR zv@;=Pt(CqH^+gjq$3rElYar)3geW=xCM_}e{a3Veb$DZd<-?)!4io1NARR;gffhi} zC+|U*-r^2fUT%)nlmvo-04qGn^lf*53f6!b+wzi{MlRBd1FcFl0s?==4jf*B`|%MX zZ-R07k%EE;&@P>e|7+^gvj#HA%dH#;BPd;oERN9>y<5Fu9Zwb=Sk&?`U>p*1a(I>d zE4QE!v!C-4N}#|&>}-&|f}mC%)&HXW_jY^qCby%^-U9fb1b9EBjvK9T7SEJP@sm?= zbQGX=+tpnft+)aem?!kv^kr)J0v7=%UU5ns!ZPsYK=pt#!wc)?Xl$j0)wI45pp? zXRmtHQe$12U%0LC_%X-R4w|06K19%gIvMdqON3AdgQuU0I=`Fl1Qfnsb zoUKh#ayf}di+bdkozX@)M_&XpaJ65x>lM*wb3WW$|CZiTH&m4+_UsAkri8Fqn|t6| zbK|}2K)mggzZJCk1+Oe{D}eKFbhUy9jt9`3_Xx8=HLLFKCPJzo;D5d~H|N^SJ`mbp z$_Fg-1*mUm>v>A~T`E$RaZ2t_a{VxTQz+?!X|~D5p8^i2KF7849)wz5&}}-VwAa!^ zdD(@oNDBiBKPli;I(U=wY}WtV>e(zVA?ym+x5Fw>D;0bw-+6#rD?TJFm72n^|A& zCDvX1c3oOBY7gsy?W1}VurQl*?I7e`@G1gKF#Vt?pbhEm~pv}#5;d) z7B6b65WCxgmNg{uI65F_u$STQ6c>&$FF`%Ol1{HoSGI(|vamWi^yPRWxGvCApSF>n|FQ4Wjnj0I&4`1;=U1cZ zF7%He8sd@>nB@`*3JSb)U&qD{xBS=CTZTG=i0O!!F+i!W12t`^ReNVPZreJP#U^{u z%tw>85o{qMqo)1?rk|oY^bh@aBKlK_dt27!-iW#Q{hG2!-Gz)L$hKuhP*_ z-c{~S;*193sDNeTx6ZcBTLmp<|I>^3+ei=tq(hv;zo4FR2~kG zk1o>mX+15C?BX9^LxGPb9|b3q@>odbA95dhX?S8<5zVbH3)RfzUTDM&2qV|&IBP}= zd>6pl;e!J1ez1-O`{b*$Ff`jAy9GM&E(|6m|7)Z8^yw3r=PrZ);_knVLDuOzht+2< zjstxJXazckC|A!Vr$ZU?QM=0Rw;Z};?&gpBleK z{DbkA)fdD|@;WJ39yD5TFRd35%Q1Pj4h@wxqrbFNyqSZs!>2~b z*?#c?enl+d4iG{lH%`|Xjq=;f;DZ01r5`*%zM8C(Agamz{S4Y4qx&0C@YQ+w9x=?@Lc^)u` z=w;u4CUIC?tmQ2;F&D;3ItxD(1XJ+ECm7e)B2EjWXax@|(zB_^6t3e*mt50FsIU9~ zr|N;0Z%yb06aVwuX|3j}iy()S9%4?0=^;bTD@8)~%~dBW^h zkqmb$e29~yEa=ZazYZi^yAwqA6U%Q&JQ$C_J}B8CO4zNl=$8w~tmE^;tDrrv$K{~E z0dInQi3mqxl@tP5$<+7swT& zR^Zf4N=hnl8Z+CFaCNPio;nX&xWn<`POeVP8FpFyx@8dW)X=8O=v3N^I5>6Ce8(c9 z^0~VPHVNaK)cPvZzgPY$YmoP~IEUK2@7&j~W5@7W6qO&rZlYmh%N`NxM>Tj1m}8nh=`xDW!+ z3N|k87bwF3!Z0$4iHRW=6MlaFahOZHy2-7g$bv!kZZcdBe!{IzNg-wF`Ef z3vg2L05rjlL0Zo}&Id$cYDflqBLd<7tAZb%Z+L&MsYYv(!Ej(E7~D>X2*$@p1{n$B zTPE+YIm-8c*$Xue%8DwB>8D=PU|V&g8pI@j#T4jY!z{6r<3_RTp2^ZIrHlIDXPjf#quOCos0u;_Q0rj8!3QPa5r@H70+?nU7#4gp z?19rZDI3@+Ex@{n1?;jXv@}a3)<8|l0Zv_Z*~TDmAe#WBP5zv2h6n6I@jo#;YqT|1 zxK*J^a>Ikh>!JN+9I7T8AYqa2_WSLOhD*7y{e#_?ZfF7Fc+zJ0loNO5kO7${IDQ41 zMuvuZkW&#`07S#SXLx?#G_(tx$z&M>TIz}CQ&Ux|l?%ZITME~TDc6zGO;=OXO zU0GW;1*g76KSZpuZ9qh=Cr>;Gnp#@!0j%}KiXpHA1Xu9+CY%=Q((+yd>-jDQu=3#q zfLNkdp#t(f%sp)0V7t(tV3YzoyF$+Uk~T^GF<6yysC>ci0wzsN=ov#Y0JO`D14fK})%duocf8|bcu&3^ofd>% zG}#T|MZ0@Q@CET5d^m7@0QA|yeHtEgP>xD}%Ih6*7@{x}>*0aYtq=X@<{7nKa4AEF zRCQV0t1pXiXU*E$+Uty5nqG%YwR}v_LCbl}HHn}Me9|0o{-bemJ^zp2T@hkmA0brQ z`uYU7jQiZW0UQE z%9)v&TF_r1P)1~54wgWodT;NN2)ct>lLBX(G`oO%LYV0OmKqdL;6i*vfukq>ExzAW zP6Yu3T+7}P&XNaGy{fNG%E5eX35`My4i42LBUA|S0X8o2dN2%3tgIjnDa|WQE_};H z6u!Sr(4yZ2zQvgY3^<=Ex=A`bGQt7z4@_d;W!WMdJSysCTBOweu0&!ME;&EewScfY z)%#Wi&Ia(N&`}eD@Jaz-YlChOs^{GWL>RPgNpXoO$=Fz|PBDmVvp!irH&!Kr*fb5A zE&-gkbc%-#NtiV~iEn?GZ(yrbd_xU)0Q4v+^*XfKbZbXKtz5IO9Vocb{|WR>9WWLa z=)t{Ok7%YT#d*Y4Z3~Ny!KJNBA#w)kjWYXQa3110xc?*~SKAHrELn?4wJ{>~7JV7` zos&s1JqKsdUKcLoblus6UdZ@sm$=MbA4s@ZY%I4q?PHx3dgz`3!}rVPOJ)V+ksX$ z3))NCX!{ibmqH(e9k^cr_HPdQY?|tM92@|U;L0hw|B&$w?X6p7gZ*y16Iki@wXpBE zkDm0}A$2xqbjIbKM)~V#Xq4?+z#oO;A5b1KCB(MOmD($?^Wl04siM^J-`gJi3fr2G z8Rgy?r2Yazq}AyqWcN0=W0h{(jH8e3j9O;4AnZ?cN?xr8VjHo}0Lk#>%NHoB!rzeK z$o&;UtNzoY^lLzF|r{tc}zF>MJ2fm`g+f>}t*_DL*-K|vqitvKfu zfl>EpP1?xjT-W{QC(0cfB*2?04*j*t{Vz_RB_JW`o#grLF$Bs3JhFG?5kn!=d&(or z;3NWosgfsm>vx=i0^;MluCLt>MS_tlB#z3ez{Fr6j=zas;eswWQEBN5j1S{*!B~rM zBCy}Y&CD`%8g(Uuz?x)U%F4o0-^^AO1T^&b%~25?rh1j3=8ShZ=JR3yVP$}givUNY zS4VC^Pc&6gZ}N*jHa7O_0#;`}QZGMY3Y^UOzt#MmQ3~J>AyU=5+HVd#rbX^HlR`{i zX*YrgYE?mVj5@Zy4gIuHw-_#NBp3a#RBdj(m}+E->OVvxKXQRvQez(}k7{rya+OQQ z*Ozc((!z!vRTo3=i519G2c(s1qzffZBlh z!1G_#zRc?D@4GR8oJ~pQ)=MYB87$t65}+*}LfQtwuwQI3)&L4|F1T-FM)!?GKk<{B z9AX6h$JG~L223*<4z>qNB1Fv^2({wgfN7vt;mM%4%D0oJ7Jb*RsjnB`M8nL0L#7gu zwPD94r4wpghKiPEKjJhVo&hrmKbs4^IFPojig(jxSb(%iC(s8Vw z9C}Tv%Sg>;93AGwl((jwa>H0X;;-pW&&wtZD8;a#DH7TBhS1U%TrarTX|4yTYP}8& z8kPucX6M@9+B-N}YowGk)H&-s;GC`IUVc2l#lO-n)b12#B%HskUUgm}QtRPNte*i2 zMLW>op^%Dn5Qm0^>2=fA--8VcUKO|~$G^9pcg_)d{XTrCUMRGv{Dld(rw|%+*lhnl zoV^D)&~4j4-qet&tc*mc%$6NRNNJIfJqnrGI}JierKpTTl4NJEWK|-{-jb1-%E)yP7?-tHzII7S2%>F3jg{y%v$SeP^@! z;~bVaztR1NB2Q&qsb#EV)y8(?1l*{rxA!_BQlV4tJGUmMpvZG7OWcjcc@tYzf{dFM ztEFoC_=OXZ0V}QhQxO-0xU@0+mr|J_&Xz;jKIQGos}_8y+?rc!CQ#-eLXIGD78VJQ z0smZvLK#cOdnUM|2V2kLr8@Riv6AW?V)*iHf%~sMe!NvD#H5C^&fYL`&N+Vum$e~X zfc>*Sf~xjHS;ednpk!`u(UwDp(f~JZVreN4Y*F5y@e2Bps*#{X^-i6TTNhOfyC7e~ zI=`Zm#1JN++$Z~Fz#xcnMT>f}h!09rt83S&AY~U0kBjd-_*}qvO|OjSKx$G&WhK@2 z6Jed&erYZLJf2c{62(B&YS^eW-A6zmp@XO&ocScem~#FQe-yoneogMZ#?(l95#AYx z(yO-~=e%jan^PFdY5cORMu^^1%11#`_@)X1FRo?p9e^*EXtPE&!rFA)`Ve67n(9f} z4&j^=;o>WOWj}wL`C_~HL!Jo~u-l)gy(b`?eOZ{ke`{3EGlA!dOGKju3Vy8flIfyQ zHiXFlr)~+Tna4MXP82Bvl0oaG-Rw4P6w>yF7LjbAb{lUW2^ffekHCRW3 zuKVX_SUry>va8ro&0IR4X?msi=yS!@|Kkt-Vj~6uxpXGKCHndEwQIei)Q;SciCoQw zD-I1)R#Lihc#HE2;83cM!hf3)tZnwJK=JI*FFY~&G*IT0wn_-iMR~IFpD|NX((}E7 zYl^P{ojfr!L!NTZ`FMhAG$=h2b8}ixrJQba@R~r<@y?|+H5-`6edI!_ALoRfR6B8E z{lLJ0Q^QA1ZCInxK*RpEgP)&{7M^==6&^VNP)T=ay<|2>;U#2<_4o-E97LSh_wV2J zb});us;#om1X^;C65$epL3+WlHMNu7UX?1Ogk zfsyX<>OB=RkWk6l@>tJ3FB<4Le{|HK>gU=#;f!?^9Z9d#c@x40cmxFx7hak}nRI9U zWS)7`9-<9|lV{W2e5@KJ5qgBN1&|ah8~306O2qn_W>lG)H$gHVaJF9Eebn*lHPv{s ziIdD6Y$!FWRz=F#i#D)6eWvMXtuW33JVViTQrvp2Fkpoc%0+8gdxDIaJEO#X(*)}f|(1>`4RzM2Lv{o z7pOh6kZvtBrQyjos#AZKeZC~#@ZH6Eb4uuKTsJZAa#ZDdZ!}_eFC>J#A;6XQ&xGw_ z3Lvl!>I4(RNWnX`bMo0P<2>kUjeqr6|N7oD_1RBw7dl18b(1Wd`}eZ|JE8Me%Gtys z_3O(f*~5no!2zk~Ii>VpyLKuP@3jF<@vV@M^4#F|fsK1#rW}mCwLEV3yC&Nh8vJd= z24Lo7H$#2Gv44N-cX8ZHzAqK|NP~2p0%$Jm83b1oH5Ct#P~8u%s0?G%x^h&||b@ zq8!fKJ$C&JL>h@}rYWL(a<*n}?)vmjOgDw(!-ASIM7m~h15*2lM!Q+PKb~{EbE`(O z-co|~UZ{?%n)k>-|Ri+opm7|GoutF|Pp|7B;rCHwRj|dFxtEP-e-Z=+^w%JG-;o(PZy!b7t9xU z=zgUU(RIMh`ZA?j?Z`lp^h^A!#~$oi38z&VP;?OlNBoeHFPx2wdPcz6G}tN^&A4T~}OP zCZo$0w`x@liM|{exrs0WJs6Gk?ze7uY%667FX68hKm zpayWb(Odj=k>a0v@B?726`<5lxdmwl+Pn6@Pk}f*=>bh1CZ1$Y=M4qN{EF^;k!$2! zU=p$Fcsb3ydtiXlwXK6l_!^RQ%dwtmn3)HmfGyH1ixRsxC7gkdY1oJ+B*05M*MXgf zXD#&kMes1JzK)~5>TA_j7ZfAA^JaY`(2ml#+3T#sOdHi7LmfbF~^=4c)?I|nT-6jcHV*mmxkthRZ)XLyogh< zEd%KI<0;f*Y*z0K8(9~HM3YW1W*IKS@PL#OeFhRAr8j#8B*JX`8Hs;`-?EXG^9qr{ zvj4hPWYZd8)qs1o4_TQ~jYt7$90fS9oj&|kemucx>Zhv_kZ`}yQDEd{EBn!qZA0hd zp;KpslXZu;5WRz&Zs4i6>FZmwE9c^9h8sxThE~Nq`)R<+o7TP3oGRoPUyWlNNmGz; z08@dUmjT5^IS?;760p)WIOvC32okQb2t(}bnYS3D6)JbCsCC%qKFBXz4RQ6;~zgmnmC!gw-^8z91rC;$YCw5VtJgFw%a~?5EF2*cKv0Me9o} z^zn1@B`@M*CrktVh*$s~8CVgxq@_Fj8Y zdtukVA|86W|LBn;(l$1GtaB7zHb9s_(#sGlz{1bZPXq)yIuZT$<7GO)V6kk1b(b>; z>b##xa+UlgRNc|RcInb3yV7M|GFv&zb|~ADOub5ZxA6|avHAI%v5~%K8s1WFPoBL< z8_cS4WAvnl_w-Yjn!!DLjbzytSj5!QYVgQL<-C)Xn0Q^Z%}I6feF+Xj<82yh4i3UH zhYs;KFa?wivDpoX@h~tQ(*VSDF3W0iSa2@IsgO`QL&I&O4$ilpKIMj80rX={lNk)*1X>|+rSc%sXtS5 z>Sq5Yvs3Q557Ww)B{Z>I`~Kn6l&~%3rKVARYz+@E z(Y|TQ2l4Bn7-bk>Ndm=H8J>GGaVpJuR*@}=fZIS5svb_b)9IbhstceSQQ(8$BIKj5 zfGvaW4k;HaOJSxUQ5Q8P;;oJv8ccwood5k@MGowFa9rKPlvUtN$m7VkE59$V*q5?A zMXzK3myYVFx7D79ymqQjb_mLidOx|D)c&t$x5b8_efwy! zk`E!Sb;G6pXJav^c7Xh=L|u9)_7l=-9J8zf6(eq3KGGT9qlWG6tI1h}b(5_I^UJN_Gb(4#+2@qz8}93id|S&kv@gxtqvu8Iy zeE4t|I`d}ri^=)xS;cF2YR}Dp%qDx~y?Y&b22Ouz0qy~2Z_Kn}L&?td*H7$lhUfVr zN~#+J15)`3OPeEk={-liu|e}4VDX|95qyRCk2l%HjXUNtx6a(%J5a7x>H1xaucE zlMn%Vw{ZWQ zxgmmKbkZ`gxmg3Q=-eE*4~9l+dF69lELDakY%*}AiDn)dpJNm3cRgUNtz&e3@~7F8 z_St=-wsBBF+aPJFNhLR*Nu_-7KR=pu60ov>byL#RQ&W^L+95vEcVb z{Ok9jeh2JKI3PsL?jRA^s`10^lZU7!J@Fb56$1nCw+KBKMR2W%R)A*Z*o*uy3%Buf zB!WCEe=2CUi|dQH3|B+4<#;|AF*b`lNHvrz)1Z&sEl!Ve7RrpLo?3hwUq?~YHh&u37* za_X%RB`VX5M@MxTwtlJq{bwS~6F<{{xZ;6D z5YGqb%Y8@YJkSZ9Qd29RxxZ1f)ki0?c(#d-m5DN2tg`x?NYkvyVh<7c_fy%d0Uq6$ zg-8;(8SuO9g}u>e3|}+B-3Onyhc0SzW~WoS$}@^7lI34fubCP(83U?8K4xsgbD!uHrZj52TSQ}vRlE`XJ(2Z z9mJ_HwmnKYj$}e1UBzJdyp`MA9-G#j@xruwfyi}2W!i2iCjt7&K_qmeMytto-fjWm zvf5WB`?^1R)o&?1^aojBM=SjEr+V28PT78**jpOQs~;X`u{)D?n@NPIClxaC1pe4{_m^N9rJ2KA_NVQynzA7=+gMi zp_WW)@_#KY1+cA{3&fapT*!(ko!H>&_OZ5hMS`lCt;jjJXR(qEhU=Paq~WUsn+XnS z%?-o=AW15BlK)9ok^TNJf8#B;AD&i7Ap4D5W9@&xJY?C4ac*2ggw-Lsmp0>My`{jZ zTHDZ&=8yq%d)KOS?`oP_{=S)mf^UsFUm{?eNsqn;1 za4cajrAq8(|7U}*4U1}!P@_6%COrT3X1+oI^PeSuHAq|&l1?4>@iP@wQy}zUHM`w2 zmysci!qmQ{2{CZVMwLt}R;@AwwHjprc_+DA{AHiXL&j+#_ctiFUcAeORAuW!rv4m4 zu`gRH&zdetnPE>4`9@Q$^+D-UJ2uTrw-i0h-tgfi+?9Jer z5q)8k8FoDO6KR>yoh~{LSy=dZX6NQe>=RgSNUDl{=^I9`F$-4f&QC^$?zCiZp>ADw zXXmjAs3C7KYnA`Cx`9H)iOD57CNdqw0W!?BzhqZ~ttXp}2Nq^GK@N%6K!A~5uv&rT2u~LPQBTYSWI_mvn^E7i*e5YD zT>&EPuYiSOdclfKEKCCd>bc6^o4c*l^XIDu=^Pf08y6Kd4RINTNgh$!LEH8FIf-gg zZFM+cC+u329kGj)U{Pj#=ZuU<@@byOuL(Hgq>YS>GQ;6$M*X?qP9PCv4)O`6W`@Igo3jwKa!$F1=(TFDu7^@!vp;vJ;I~EFFxXBMUKvP6RL-R`fNCFa2k#U(C7PZ^BiX{(m@?qcm{fOgI-*LSV(bP!6}>5Kde} zO?~*>InES0iGP0rGNx3o>ZwV1pUoEq)D8QDg<<$w2a?$dTUSkeJ+~-%Bfjn@WMLr9 zK4=%s&Y#gi3?dihX63(>+<_L}Iiy#$L^jNK9 zD1APYh@tWEbaAC{#y+=9&d_^AL?U4IAxR{?_}=nXiMra^mz;FG5d&@owrg5|@rSX1jVGr%yQvH3wF1?2c@7=1=6zSO zPSTX`mZ{+X*0zFnenLO|rv~6G-(mc2CkmX#sV*SN81ks3?gXY`NI%kofub!efu*lwDuF27^zt_Z~}nRm7QJSx7g1Gu?aQ>)5Ay@!WG^ zIV~2h>E*;Q2qcXVwIt(AwiF7`Kc?KzE310?Ae|}zJgSluJ8t4A5%V*9cE5~FQS%rKgu`67$_w;sM;k`)KK5O^s`Xv@AV}K=4r!h3=-D?&MJo4KB&Vp);niZL8+PC5 zrR}O|Y3_yKmgJ7zdi2O@JR9*Yf(26?7JNS=|4p!fT}{pg0ePRf5(*Wy8q5I?S5apWnEdyVvn4@18v$N7lFFVL-2P z6*0NxBLaEwNFv$8#wQ=cvaSQuc!iG=P*4d}Xft`wI)5L)of5H_Fy`RW_K8u>cI`Ek zO$bp!g|d93?+T)b9%)aXduE{fO3oq;i)!lEFVg!0u@pcOVKSIDK|b zX{tWTg}@JCtjBLnaM=IZEs_JsVk0PYE@Pmkyn`IR6uex66<{$%7V|Ta`!VIn{qJZKfzLP?cI0bHy@eAD0@k^8d&6; zB&_TLD{yFHQL4JO?`?qBOvj_y*Y@wj&#ZC3HhzgN{401384V2$?@5Rtz|w&Hh76u( z2eD5)IA)ZV3qFPdF{j?b^oWSN0+yo)q!{7`@6w?FSkKS%XX|%ij@EJRp@WC1#U>vQ zhUDu2UqrB|(@1t7ae`yFttg4h%3|Eaee4w^^M0>hy;|R(RkFkQ!%h-AMMyg$6TsXJ z6mun^NWvz=0dVSm7+9GxVGv(|1~aqc(jnw&qr2IKa2%3{VW16WIr{lc}im*zv-u*|$x#HLk5NYGF<`*P&aN(5v$m)lR;pj@ZWV6RR-rtE(W_b?Abli4}pnshEYU z=_qN}#+3gQmY+j8?*uOge}iED&yBF5-_XpoEP{6kry?Yt1cAjdQM7B4iIOPIV3EbiG%P+;uZWRd8h+yN%ft~oU*q@puh8+T>Om7uaKq+iaRJBCHJD1GeW1P@CllH3 zUg&591k$TYyL@gR@cbM_ua*1pXpoAC9faIaii&-iZ`?-@0*IHPt>kHvsY{Gv|6!yK za3d9WGLEgjwzd;cY`PW$J^e&B+xKt+Yl`4GfFvr$*9HI(T=8q-R|*cMhwNNKRRE6+ ze~t>b=-i%2ETo8th~UQg&h%}zF?+w7cu@et>)^tB_I-yTHq#*NUl$BP)JjQz7yxj6stF3fL$8{#;IZ z$|1*OXLtS#_tV}BvmY-{b|k)H3lSG+i#~FLOz_b43Fi2#gM8f7S=n442zji_1-%UvOEFUHE!K#8nf;R;D z>43$MF3@IbYmA&&2*JV2fC@Xraa+CJ_1nX;_V&d*S9SIKl^^C2{q+sV=ndpNSl820 za#r~&)Ys8LCxE~WLTW#PhWdk! zX;f$EEbfa=i$4sle3rD=U}1!UMZ#_sKflq?O#0G=?9r0d51&lc5EVsg$Tqt_DvOI7 zq6M_FmcSbZvuNvgpD!pD$XBeJHSoKb;n4Z$LFnk9 z=6ZzyC%zN^Ey-1>VRfe-#|fy znmlw85}5!zxlOR7mC4u!5x$Xq#%|NQM5biu2c$IA&yS1Pr^~Z6$Ct--2Q zyctT%qt$Pqd4JrKZdB7sM$G!BeXd8vdBaEu8-YO_B7*C5JbgmoO?~i~-)8E%X2W9d z>+Q#QUO04&Ov3=Ps+z&T1@RSY;%IT)kNzI}Uav3o_24SchUPl2#HlV;0x*wn708R~2a zNH?+E(=wY|CLh$pc=X{D@rIr^r`flBneUZ09<^>$&$8)Ri_xFoz@zxI>&SQt)9;}D z&JL|Yc(vqM$tHl!hfbf~MDje5S>db0P~2)ZF^f?>tJkc#lA9|rKap9e55u9;KwNBp z9L=&%|Ll;9nw3UoSs)KC`4N*#^a9~s4Xvs@b8+jLki9ExBRPb%HHB-NCFOr~D~#N% z$tz4bg|UV37K~0Ip*=3&srnCGNhtN`c+jU%od%!g0OCz#m}yO@5DjYTHlsE{=eQTl zM|w!3-EHyh#MDCih?SAl98xy}qH|nUQT0~E#OJ4+f_DpKE8Jh#9gkO;3jQtkP;s<} zry7>86<{#89u0xgk8xkDua>^!CL$7N8@g>JHkj zt>XeKWn+h4Q+6Lcz+z7_K7q~s=Z1n`z05c>i+yjz*yLZl;3My9JtDvsao^7OVlm;6E)t{QvxI~m?VwXOgiTcXEn)F7;ag3$ zTePKXdFBSG1eVZ-hQ|F9qtIN0Nwjc?6RvCE^NEIQp&}Uvs6#_Tc}=yoNUi%N=;UXd z15?Or-oVN_eCjWdQZhgZehMOE7q)8m#}q~q8He5o)eMGx1V?kVbf2Cfvm8JWjS-vz z@$*D0#eVN7=|u@4&4z%%N9FAV7|=yL`KXw(0ti_m*I9g`QC57gwthy%aXmgho{nfd zp8SVmB_-_Zd%D8WLW>I=dCaO;^7dBldihZ4OwIM-R=!zb;@1v(!&th_cdlot^ z!bC7W9W0Z9>;z8)c73Dw_m}$0E`xOpkDHt{`tB-w)Kb(ihxNdLN0TgX)j-fb6FB@e zRj7ek+zyWX-RrL5;LXF3J>pM<=W7hl^GD7YuLbTgDmnSqSYPH9)gRH%}`Qw~ry$nc6YvA4bgKL7;Q z;C2r&qh9h7%D=$3AD?;fAVkhG9Jep)=UDQg@P4m+xxA!AZ@4);U~U?Yb?!+4YN zBcfqp4L$+DJ#Hc@he#aQsSXR#H?#R+T_3*50%HH+Y1w$*BtC}tK=&J5Z~eZd^U>2$ z(aH8hEO1-2LBf9E?wO%YYhR}5b!Ue{lfAlrhdD`LhSBk|{>X4TxK1Bh_UJp)l(8II!ARNlmw@qFxK}8tzf`>2THO zO*EV3wZux0hr_`{`NTd26m9DH3X%nY&+YYZ8~!Uqe2Eq|41`+jdg;*0dG13Z1te_x z0JvfiIlCqYNv?dM>bIZ#;m@HWT7eP>@Rfe)4LS%lctt|^&R)gs6C)Zd>8mhsVE?XT z4FO&#w=l05zN~dj`<{K8`Ev)&%o=X|EhgEPd(-vj+p|r~Eojpd3sM<;ZS()M{j5@% zadB%fGi2z;nE`XMNt$umgww{m>z3gYwTuNe#jqNEK4Fbn~2- zKH8!!r^Y8brbR;Y{s4n@eNO>ZT6xScTWvoCuH#CT!$9rM{c}G*sh%K}1olph6ug%< zV}4<`VcqA@)%UcDr}`4R64WZj2JY`6PxN#D;H_};FDm3(8UV0Z!+HJL4w9hfe&n#e z17V>O(p28(y!YSyOXTHL|K#~MycOHzL!yV}K5GS{PS(k1LW0Dbii&GRddV+3o3pI9 z2|mpE2=;}hMxFR%F*xR&+|i>qwg$YGZ$J}2hIMW~)k^vn+<91g{M(YwZ&zBJ7KYd6 zZFFP(bjWHeG&&)Q;sQmH(kHWWsxVd(yJl;Sz2A<-VqYsmTO zB8g+VuIsi@!*EL_LaVn*Hz3K4jGp~$2caZ(txd6hDhHnY-a^&@Ij^gm)Os!;9c9D- zVcOQGDYx7vw&KtFU$xceM%AB*Ns|3?Wl||7>2-Lp1d$au^v(0QxTaj;)wZy(faDu< z2+NUnx#B;6DNbf2;hR$GXzcZ&hHZ`ETt-e!jx^p?|L;_YXu8ATg=tc2SSr z81++~IW`P|SA)oAQ9S!BP3&GG6ixSo%C16(jGdZ^ znc2C<`T)K$MoE{KF`t@1-#`k0QIIaKw+Fmc7>G=gQ`*!&Drc%Yx+BE8UY$m{a$+lI zt+{;K2D<6BL+_ie+x>d5Ypz?lOa)Hf)KR{0npex*U@}$ z)KnjA`0pKsNZg`5vvEl7Ih!)bZL;YQp8Yem09MlTrY)YH50ATUqrSbWqx?oOTVz38 z#EwOtANH!>N`o+YHHc`i(!jcf>kMw(Yml-waLG=vCsVum>5b=O+X5< zZSZJt&$Q*BHqk=J2i<1;FPC?;0kk+&YV~H|ktHVHy?y(&+NbLdxH}AM(nu84&hbR9 zcuPKaDfJOn-L}69zr_lAkc6b8^mS^G)*w>zt`8b;oc27gP*6@%T9F zCNbUpjp`^>y^e9G#aE!5966D1ARArt3T}#h6E3$BhkDGr6_F45TgA>o7cKm@@cQ?Y zF+I~xW4mX=#y8>YDh*}$R_ZH6cE%~C@#O;}^+-ce*>~44`e(K18jLxD5mq9>ioC;|1?% zgS$g_Xvf}J1P^+IYj|J%?$&Bq5OCgGs)VbJ3sF3rk0dWAoo8NzyGBQKFGDs}ZEiAh zu~N=r+eD+HDIq7jwoW{(+&~`VKPrWlD_3G46Lp{72cz96nOJ}X9ylcT|6kM+d`zxw z)Xc7HoZU#i3>;T+`?4zmH@1tya zy-^t(T!*;QDXIrARC3e*|IvXA<=}E*$fen`r9Dm;k~oClt|t>Z1s9&4@|2%3l!i{_ zMX)DwRvAFq<Z^lL*o<5@S*@sNHLGv#to!{2pFKJe)wdCe`B}& zNxO0G!(V!P4LV<4aqzhP?!yOf)%bKRvwchz-$zMIl%06{4;HW2bU>*|PBHlbbaX2N zEqq}SQzYy4Z7Yn z=Sot393C6}IUZa%`Xc2bM4|gKgvIU2LpGT_tdX{c?LU+&p>7z~2j-+73an33KA1CX zbyn5UBZZrOL{~KvG;!=PD)QHZ~=&(6&~BoOjr%d;#Qfe=mM%CU)w49#1X!Lt%=qIXau?T)T7A>#_; zV;b7LPy#*|P&QivQPH(TQ{l);Uvuf#T1mNo?PW$mWo7aRtGM<5T`iN5{nH-cKNcr@ zz0O2g$ZyRh@{j)3T;4mHz@2Zt_*(ZJz&_R3nyeIG2mK~e+v<570McVJ4cw7r=1A~i z&i;8y+TF_N(jcqA{3aS?Tcv$pm}u*&c=t~H%Q)~c@Z<4^J)4{03k53YGV4Qw`b9A^a=ifXLu8k}X25o_`)49r?dDwziOR7})OA zp0RBM9gx@ZRT>ILq;M0`N}xy~5<9r2(2xPmTsc$(FOQOzsxGO!KDHm7q|O zag$jxg-@~Kc^Iw(zS&&EPOwuBlU$pTE(4*3i=7oJZe{!1i)yH;h`qEU=q;aOf|r7s885z= zbcUt3=J%UB!ktuldFk>O5!5DQUjkK}Ay-j|^{kT}x4BiFm#efk0dubR; zT48NTXe_8)8`b}r)pIyr@>}tPVR5U2R#D6bsrunU-F~pIbt)-Hn3Z2=6Nyx;+ z90MSw%DKhKK^rz;zVe>-9~`C5h$JJy%6@)+mF~32%f=rYr}LEKkgfgc=Fu2f{M9l= z_HhZx-+mt7Rvs3!_yqBb6zcHqeK5)K-cbqnOSi1nQ5=e`cu?|`3~W5;;NTFFgJ;q1 z_TxB=1;xF4&J*{>b&+mhnDG^+`wC5`GCrGoqOSQ=FGh|?Ovc#XdNG0 zw(VW~GOJWcnaG%&9&)NrcKDWX1LE-@2GL$j^A8cw{ybNac^KG38`t$kF-~bo$w7|W zja1yu&dw;Xu9BRd-h9)2i()SXg_m$cQ}f%ALfam+J>*DZMTMWbw)qcfW#v2C9vJw3 zT|TNn9;bEKpk9diclhLb@8n;2`*&d7HDiQLv$0C?PU(yd_-It^1AEB1041 zT;nd1eciFopTFy!r-W+iIuv*C5;eHYG=DiFnhc8_f?&}}>->40 zy~V1>V7wB9(L(*eGFeF9&M?FYErH7Okkt^^#2>~4zR z{e2hiRDMv#fO`P}hi4z`GZthp3-#+f<=rjOm?e#%UE-!!Qc?=OANJ@`Aofsffyc%8;RuTDCNJl_4WBFYSLG-{#a>co78D|IS(WmpHy>k$vNZ~ z)&8+=!+|GcS;RDSw8%*UL`Qvg|A2=StZo84y&oP?!>0pw=Ik8DiRX!l+`QOxg&*y# z1l}VP*&ozLhb@kbEvm5jIpL~s{CFu;bI5%;j3;jAhn!?GG8>8x)p-mnq(WDXKyfLt zEg$rDA$F}%DhP#Kw{K-H@fvdjLr zYzU<}2d3>ja-Vqcj3h+CzGqP;r)=MZ@saHqUvT%h>*N=wx9w34gE(=PXKPtvW+{B$ zkSL+c$w|2VSxX^C8TTa3ahptHqG$VPvJYhvq0HRf-5*Vl<4s|G>Dz|E&SF0}bp-gy zg&e3op9yr;Y{HzabJ*P$Jt(%%1eC9BspC4P?N-je))DD&FF$p2o#CMqoNt(S^29du z%ZX$VA-9Db&%7fYhuH-Lsy!?h@T{I4s1j~RMBIcCseLpi3G%YnD3>gnHMoPur*ZEFdmey}T8jsc z#R3CJ^yAKU*%xy!#!%K)IJeRE$wHNhhX_?BdZa|`nh+&8=~lT7*7IX+`LT7JJbCjG z?Or?pg_9?@yNp6FxCE%=&vT=zcOSy&kQ6y+6fR$05-Rcd1{pGkK9nZjulDg_T)43* zp^5QV^vL!xKJJB(4ip^8fPdRZD{ljfqlTg(<3b;<4cglFx#Vz^QSe;Kz@vio6FhSa z3kkM74ADdA(TeuM(?>hfFh34OkRD1{)tMatDk#AHp}hl04O3cq|b-zfV8_mnuV? zbl||oEmg=aI2uFpe}Nb#*jaWI5E%ykAyQ6uY;Qo}1*o@p;MWg_=D-lzkLO;5qrL*- zhtgJaI57{c7h;6K&-y61Dv93-4fTU-ir7D)^~s!)f%zTbg^2WW(zQ19!@cL02Mo96 zGN3t?oxkBxn2!U4|6vQ8l?}o>SM<1Bnay_RQD5MV8?TYyWHEr0<$YK|&Xdxv$!#82 zO5Sen(K*eBxGhBBz5{eE-ITk)K8^+{6=R+S7VShdRU2K>?VsHSjmCm&Vd z9N-Y@2gqE!nTZmkEX$r83CdYFjiZE&ZXiY9)Ra>VLjhJI>auG%Fye%^ZHvZd*3#Te z!dKhfYtQXDdowoA<4~T1EA*%v>efZIwycVon|d=N!h$vdj|Lm-NKmwrt6!1cK_jE5 zm3u3DY{U?EBfDU7`9y3nVq7{$M%s&XCa@K6MA7I}=$N=Qo!F@ls|hjt+H%}MV%TG5 zN|(8O8QY$B_kcd`gWho`4@#LaP=w8VTaSE_GbP{Ws;>cFfXu*|w+!3#_4XnLPLpn) zc=J(@;xj-DTS@Nqh&_jv(1V zyqh(0A#exW&SAOtq~w^a>SoHe{M4Q86rM&iN8* z@*mEZa8fBremH>cFx2%ZvDI-0K`xP@SV+QbQO?0+37uuVu3s{!=B}f5eoT_-W#seX!_rK2-P1L4f@JDqjiDX}_P3dSx;!^SUk5ShD%>@n3!CC7l1H_Q= zlbeDEYXv+W#~w+s0!DyAsu-?|Peo-AdEl43O1!@%?yk9vr1$f+GDwpi~I}w>@O{w zgJ?Uf<3(U3u2A-AdQ_wO^9H~y?gq=!GtAdhBu{E-3-|m zT1iHsU@coY4}*hwH9t4wJb4D-m!m;1gji@8Ut@kdnMbH4;Ehln>>w*G1dU~R?tLby z$FdyKSn-gnqHXJW5=bpIwFG)Phw?<#_?|X~pr9aYNR~hhK*md==AiTspAQAWyn~i? za`ny~S(Ci=z>8L9a~$QlX8=^1DDkZ2qH7Kcgg_`9TQM64h~cI-veVJ%Dvh3xZm{i8 zCo?4Ro=8cFjgbN^(z0T85&Drw7h6pGFDj94%IWW;se~T#ry(ki2gfM#BNj#qB?krv zhaGYxDAzwhjv9Fbg!i7pOi%s>yd!``#L|wVj6VsB$gujcG=%tg`(+St=sS;MLE;*N z2WNurqTV^iefrVh#)zWv7cRNNiy4A z6i>|%WL_VAH73YDc+k`%7>|we6{cw?1Uu>$xNXLwWu31#*%yTguW0cQ&ar;{6Eq;G z*g|uV9qdE0R-rq6>ALLtso@?ti|E+-_|^er#lYUQt0iz+G>?d15i5_ui-I|38x zf zuYuE}v!{pa&C|7-Sud87Dequ$h+^RQ@#E^L=hjGJl*%rDQB}U`hm|QmWl8x08`maH z*#>o*>8+qMNpUG4dh5BLein7FA3gtTr0t96&0_%>KrE-4Lmi4kn%YM z)glI{Wf=M1<=A7Q4 zS_U#!Jrc1|n^mx>x%mbPR~89}_XFc#`8!b=K{`D;(?XeVw0}VDxZ9w_=fvb; zr8t!r+zk0K2?%L?GW~s(-GeJo&m^-23Db-=0g&l~r8?mIKDq zGHTS72~9kk&m5+$PHyhA093q#j&^Vm}HnuGFy5tHu-*#Xa&8bd7s zks{_^7E~<6rgd*`0QrW|cWbJ2$R_{x92VfnPo?Kouw3J&g##ZSQ&hYLnVN~(ChN1y zN#JZ_@>0RPZ_7{*?#6(3rN!g`^+hR}FaM$!f8eva8VY}GPuC${evE`+gmILi@+4XD zWEeO07!sU{X~Ey>HLb4bi*vJ~Fafhr+|l#p3;u-@$rA&EQCCN^>NWw$7}_EjcWQ^| z1An**w@FAa!<6-0p&bAQ{7M^WX>0om#ksk-2%#rz--r4uJGNvFwLJUo-5Vfz+Y7be z3Rr^RfZ*ihBw@P2zH)$)&fD0d#6&M@tWz z^!{D=IKh8m(}*%%+?^H!u{LS`4!j_8y})gD!*DK;p%#eUBhko;yR$JDg9LwI6Gg0( z4CX>WfqW;&?(0S*Vd`h&9)-#KMI>W**&VK+u4ch|;l2aI30K=A5!aJK=esX$x z`o{OEBY5=4Nbf?PI>b=2FvD@52=jr*c$fb$*|IjT`}B)5cQ4HJX6Edj{yB{$^pN3H zmH8!NiIOr0)dLyFg6TdVDd zv%zv14A+Lsmo-U@csIvS=6I%V+lO)}7q79=t*XGiSmf}~N<{eo1DC|lG2oCVQNW1c z6t%lU@V8?R_q~k_5`c+** zO){j=w5H|iM<+;fdFlyntodr!2oM-m9tOo)UZCjd>(f-7gbd#?*&D5C?}FjzQ1L_Y zPqPOWUZ^>8y}zr#%Xra$=+wD$0XLSuC{~Xzw6A?$yV*Nqn`NwGChLQ6R*hI>(xx}Y z^^Yi+jZqCMzMyL`(2TpqAj;0Zon|d+Y zuWnoIvgPcP&Q(9YWRLb06gtYSG<3-W4~Em8B#WY}D03c;p9qqalq6(55f~!^GZI2L zfridCGnj?-C8bRHir3hDCCW+UPKsK6`t%8DEA@|=1$8e1O9Bp5cI+PL8RF@g>~nrO zWkX$EQ*(t&F?cI@AC$Ny*#D7%;EyySJ9WJ)Hd!;%)1u+#0-lng$>ma*{as=(=D9gZ zPi8gW3iiqFVquM3l7x>?lIZB@IcRJjhrGQbC;`Bg&qdPuRkeHBDq z3f$hc_RwhzNkRiZ!>QeBn*JHW+2kg3Mn=YiuC5X&)0W46@+I;lhY~FT2Fup0E3nL+ zYxM}?JOXg0Z1-_w<6v+_{8LYjgzKdSYjVaO`h+2P306MTJ(EuBsVJ7CxkC>iHu#;N zo-)4oAQ~KqI|%4iHi$SKm;6huADS6--K0Gj+6&y7y{Xxro}|R~Z3|##pNPmItV5_@ z$9ylI)752zf#1~B^m@}794I)*i_L{swK@G-Hfi6)dQ{gCnxnh}4bjq#Ei2ewZ)uqs z%Wtf0T@aB4*^1?j@`$85yI`$tE;KYeAfu2DRBGB!z!Wj(%! z$1yRaVX^bj4>7yAoRi+~YsNvX;Y*%lOpmmSo~*8%%<18$_gl$v`%QGYxE%5l(b;r} zyrX4hWkrm5G0SzRQP89jGu(gfiiU>^&JyC zmSGg==bDIA6i?`hyQejWhlgKO_2ONks9x5cIV#>=)OToRZK|uSv8PB-!o!EwN?m0@1K&WSwt@* zlPs#RkPXE!;vgQIwMs}xkfHBjp}TNQO?=&XNmG+KcGp*A;9axKbCY&-6k#o4G<8Hn zj9uf<^SLL7U)YX&-51^}n)QhuDZmX!M5Yzm=VMW)EV7HNG zN;nRRfdG8_)%VDCb{$tnpH23+N|BCEK#;`yKm5$ub^*jV-{aH7am>!aAyxb#f-pT*c+OkI9KFN2`f8`$6fZCD z*GFJsi{LvZW~}NSNqDUAG2oAIuP$G{9EaBw!uPsts4Vw`IMuC3GhD%>@&GA_SwgFx zjcxRmmBRjmX?kZ{PQr4}At4buY22pinIGU`GH6m-Z=0n5>Fa^cgX2<-tA=#6f23<~ zau1Z;m;4Q*RI0CjK`_=4&eNuBjPY22g^7982 z7-hDQ{9Q80cLyI|2_`Tf)lZwW#^u_vBr^DSJC$|hkuORE} zobA0VPcZVkR*1r=16CaW z23{T>(d9nSdzRwWD4jif#Ol5WB9hQStqTYUz_g!oU<8t>7^b}vo8i)s!BOdb9%22N z85yZ-?~b6mK_^M|Zj4EAz4vnT`~K2&=%-TDS@tx^ylyX>TqjEL?UAv~sTm9Yk@1e= z4xR;OW2Obi60`Yav#8M&Zwh)svZ{|D2dGfbnXJ zU;A?E{g=U0uftk{u(_B-yImB$2-^!1EfJnma1~1f-dM$j2paWoNq_BoRIoX0vBeAO z9~qIy&Ug1{OgVQB*f~_M_Yoratfhig+-~)r2mUo9IpPbe=t;g530cDNir2+Mj#u~x zX-J2N|GivLAVmOL)%bh!;77_f^sPAKSY>CUt*pH4w!)XmR0a=!wP&_KQLrs<<>K;6 z5qQM;*1BV|y${;vNMnlU;WYB}~|5XTRT#h^U%L8>K2r%^b^!XbabC zOA|`>2;kSvJ6dR&eZEXr%GLQ_@2Rzd0V9y8$X4~!EKcRwX?p`>?$PZ(l|JvpkHtNErH{v7n*jefjWHP+SE9^RxR zqWiJEef`y~r<9bsy7r?AgAKA1Q6b-Q+Vs(78oC~FTy=Hp>OwK<{QUeaS154>5fNLa z?GXn-Mn?s9M1~zmoJ>ecGL}p~fp9z&!)8qt3bFMCTawU;pPZVwi*Hu_cM1$X&3@O; z_L~Y|xK~2ZkQ@yAGvL zEWW4IB3%b-ckV=Uy~OvMGR)}`Uu?1({%&NkVHxG6t?CTLvr5 z!&ts$fGp5Hvv7CpO1jO8HyNHs=q9M{t^eUyYJk@G$|v6)J9g+<2!6e(lhnuGhH-lj z6LlT4DGKet6TFK{LrqxJtdk1J7#`9W_7fD>iUiLK7BD8ADltvxKo$yOM83blw{r|t z1V}h3Itu&34)d>LsO``{g-tU-GGN=DmL6zsWko$Dj=dj-m0l%>;xf1z#40XkmHFXy z280N9er&*oyUuqasGxbdR@TL(_=O}!2rG(6JW$_S*Lw%XEH3gEH|s82+Rf`fCaq#w z-uSHXvW}}@U%Flj@7;+;Ln^-H^XJx4@i_%44aUD()?)nm9YycE{rVNEUGK!l>IJOo z>DiMzS54`#a6i|MeA&Np`DC=VTau=hd0WoCw5o`~FMAmK2L}yb^r;~{@XZ@&aX90* zjj=6^v7tq%@TpSJZtFP717B1kyvVy|@W&IeR+Ho7n005TPEmZyPCWeZ;9*D5+R$X3 ztfq=R&E63dxI{jAiap{UWsqX+S z?PlIY#vYq5F-W<*b#>suI)%Jny`f+U&aouHT|FkQQ*c=$^MN@sSP4nw{D?to%9NTQ z6kR66+tM*oV@8A2jbk1cLuYR;<*|Hyh9#`}lJ|g}U4h`75 z&Co=zDAZp=7e}bnCN<$*YQ1azOTAM>{ViW~wZj^Rwj{E+Ql!&Ep5#zx9jYtKeWXCK zx2>)1|FQKR@L2b4AMiyPkr9Q+NIMjjk)5W7T__nzDrAIgAsSYRw2%~ujLfnLrI5X{ zIvq`0$1X|q|@2^yVWSg zuk!BWvcruXaIQFFH`pAp8^d}4S5a&?O9X9>)QEl2Fi_Rh)Hm&X@^$InuwPjj5f>SV zT^{PTl5~T$5IK-UzGFcXj`PQMNz2Ie2@6KQpyx!K{8r$zQs&!6u-@Z&Ey6(&$KZO)@4t7%f+x{_kV0sa+CJ4|n!=bDf?4+UPR%dQBot z)_KYnox$IB9iOy4Xxvv`UoZ)kH1lQEd7S_7Skj540k;(25j$Uh)Yt+jfyS=Sf2@#a zmD<2uTgRl3EF>c0ts~5LrgXW@dBg|<2BK_EZolniWBw+%S+P;F`btvkwcBW1sxEJs zdICuU;5DdUi{I=(j-D^_C~iut;U0%Ak|#P(F=#XX4Vaj*XYC7HFHUfBb90lBsbibj zkp56ZY16Qq_1LwpcX05ci0=+z;X}~C0K($h%ah$lYn-e@{W7w{hDo{{To^WY{QCWy zlHC@ai2Svv#J`UZ-PFg{v)c>mn6?TDG4e>5cep0ZI0r7meo9GeSQ-{}Uz}_p!YfnP znPZcK9_C+rPta~yF;nwI;pOb5y|m9)%p_giEpH*a_h*`6hFSJX-}6d_Mho_iDe3ec z-m7HquFP7QH7uDmqo45@p!%lzra1MVNyz`s9oLPhbb>$=Pa=G63bByB=SRlR=OX5~MJ*f!N8 zD8A#*2#t*Utct6(H#+44`PKV$qm!ztM{%tH$KXnY_z4in zlZKw=PAk%Z0onm2#{5zAL6gPle0sK0c)1d|F?> z;>p%>Nx)hd@{~7HLKfiN)YN@srqS5m`K*ez2sGEME5*J=qkAD<>GZtFNGcN(6DgM& z(N7n|u#S#&y~+fJ>~-%R1CfUepR=^wjWk!vmsF%s=?J5)`Td4Bh8Q=_zU$5ze4Ul` zZ0ryzw1BIALPJ7KY;8ROGA;w#9ahvirA9|zYHSP*4i><<4_A-L>LhjEV<-b1W(SR{ z)D1n^=vz}vSs<%7+{fJ~23^&D2>;5B@-$DMrb%h~HqhuFGBss?#?>GA6=7$xD|rnD zlRrQVssOqio5Gt28t|2$Pj>1}4lZ5&x_z)|rpO@I3-C6+q7?)Kt4uiC={;yd8F$67 zTe!D)=T1GC@AT0y?8KRh2#w$K2M?_p#4i{bdZ{x1F)Pb)dEsE+&=8GsQ2aJicE@Zi zO&=R1%GXOfhpBKTNjn=H+^=?$`4|vo94z$5Utmn5Bf@ye^8p{HwX+x!8RXy(rlssz zJI(F%teiuw#SBP8%ZaisoBH>h{zurgj!)yjf`Ss%7M}?(YKp%TDMor>kM-?X#Qu!)KX3uRBq-(0pm)!|NK|%7}wQ ziP}Y@%N$WA^UtiNrlYVxYvt0IwWo#;ls`3yyfnmM8&o$jqNfmhbL_7B;Ys7bmrK)m z2S@4(jy1mfJ)W6Ov3Q)36EN5F{`=@cUSx*9qgQX-?Q*%dCngumD=SM;?%ajN9G;og zyFwWk7Z+!W_?K=%Bu^6VNn7g-Z^O4|l7aGlkt<*NOs&z+vKQfV=%B*gQNMe7-kL4B zsjIDU5RJrv!|47g%D)#y^-&89>%2RI>fNfosm0vG?w;#msM%w#FX9lrq+{UpwzU&1 zCLs7VJUlXk6OQ{(2sZCvuDxP+^e7#GBjbBBsE$d92!>1Im3j&|?51!r)P>vhUJ)19 z2Of{3l0I|Ev&kGx-d4a9Kqr|4KWOUeuJS)pw8PG(Qz-xOgVHpyU|<%TLZ8T z>@_02Wxk$vEFFpIeud#8qUO7uc}9XQre_ok=9$gi{J(Y;0$C>G*jv{*mYU1Kf;xE$n;)S%^cI)>h8$JlVZ=A>4fRz4;`E`^bL?7 zIMrLDS#|vbO+c=^p4$zXUCWcanR;FxG_6rzdOu1v(teuj;uOW&QSmwTGLM=O(#44t zZqNjfIX`&!#D;~ph;aZOWJC;DZGl~|#r^*Qjoo8z!>+fy{jjAOOt$`ZKppcT#c}*n zh4egV?zWLGoes8GwA4xvwn87Mvw{|v1b7@HBO~Z255pJ?ZT-=A(yE=gM&=e4lW~-a zF3}@LjtGj0JxCec!pcn1v6k9^830B71F>UIWgUNu4y|@4r5}mb2TN;v|I%fF9cp1~ zN~pD+7GQ&7<>yy*mt@JgCdzfhTw#Bkb+q(TznDP}23hdCgjW|7EHuvc(Exl14*^k0 zfIsjX*Lkf$b9(B_<;z#EUa(^ZL|4`*vaNBt(S^L`$dlWLn%d;^m|DKJP2oMyG3&XN zqqjyQK`ugMkm`K0`w6PG|ExIt@5$s64{IUi!GN(0YV# zxb;2r(){rG)I|%{bFvjE7&3YH!Jws!*doXG>i97Ua0qEl-)s2K}GwcZ4BwhwT4H<_0p zrA}&K(5p%8r>DqJMnXbB%DXnTH%?2CRep<5;K!DO0L|DfVewra2$Yg${XOViK-)jx zF&wEe^)n%_W7t+>Xa`X8Mf*8~5E2b12r2AIq$arY<=U;y_I`KK=XhY~my6J&8oB5L zRKpk-m!&6wJ!m`ykN{EgI!aAP2f(K%G94foK%jVQ+_xx*Z4IXen5yZ z81?435k^Rlv1U!?-HTaQ_Bor&k7}PQQM)8K(saa(Gt^-G-%38AwCekJMgE_e^D;nq zUY`&|%=IX8jmFa!u4s!|8_;nG(@hs7Er{Xz@9|i?t)f@q%-Ep1)2B75K;w>q zb9OW}qsr|Sj}Fd{)|JGN|5VKsUgz`h?$(y$%=p;;?)JOf3QLxj@A;ndMXf)6oXksa z8FIjISn_JVJ>SochnIO{gs;tQ-U3G}-(9-M-BP&jLAeg@}hO(c@FsmUQ?zV74vz>h3SU_93Vej!3*@ z=hIU^u>ih*Cxa1wqI8gdH#@NfHLaIM>_n3HW@VDngZD7@H5)I{=-Y4gogoKwrxdLb zE{elAa5<%^v4*mafhJldtn6u%@jh*-iiVg*7ivuRWWdr<`Xmy`lF* zHEn3k-8lZ-z&L)6?+s45AN*RRheXGYOgCg`nTX0QnoYE3Q{hZ~)+0YoFI=lI|E+!b zjJv|>WlOPP{rP%JmS-6r-q0H{pNU&XfLII?#cXUS47|V<5v+mlVJxUTU<%2BNvt}o zxv!L5N$IlPRIs*xFsI;J#=)qnr1Ue4EG(v{t|!FtnD026c6q~7pHr_-YuYtmNPfKc zozrHQFp0{L?(C~|I}ycd1Tmyv!|g{o0J+hJxy%n`BoOt&_;XTz2>b;HShL$1eT$VEI+?owDoMG{O(ZQ_Uc1(PGEnuziK2V!gt!v% zyN7Ldyv@zb&VDZb^)nA9?*JO#$aa_9x_o@Y>c0>6>8nx6p~LMr)O2Dr7jaMy!k@hH zNtJj|ZV5EXBzdVVFDkp$c-&i|d5_N?cE?I^RGAA;8w}ieF?VCyJQQdpH|Q6h?h!J3 z1{EY`a2;440_m<~Sa5pzaW0vhXDvYTpugeZg?Hx8BzS~8vD%rNQ z?na`)!DU`@?fILPD*Rk6jCw|~#yyulrpP0gXXvua*nYjwi<|Tk3i6dsH_O^y7NXnB zbC3DO@Qs1KpnEb*lf8My<9$Wl7KWWU(``i%k=;v3*aZ~+0!-JW`i8{t9*Pxpc$*BgHj2% ze$c~*Yu2ydpD+~+HWOjlT%q3$w6!@=l!fiF@bw%R9O3AGYIRsrh2%*o-E4h!Ir9v&Dd zg3m`v*zlOi$IKf)UckFWBu)@T>Fzy`R>M5KiZPq^_)!m$n>|)iQdu!-UAu6j{(-;= zfH(g*(3?al^_#6cG5_W6M>^Ii^Mc}I6!Eik&%Y+3+ATog1{3N%=)H~M`e_78E$WVz zUQQ?Z0u3!KEohNZk_-+Dv(<-N`GvuV`WFjMU(?)C$HaIF%@jl^%M@YbW!Td2<`ysAY6!%;XNdilq9F7C_1S zTvt!kM8xi&O2hm{GY!RWmKSL!Qe6+`1N{{41Syztxw%Z1Gyn}2dUovvM<5oiuCCrXNJ=3f;g^+an^<0FWN-qyt2zM2$K%*$ zPhi%{%3qQO^xpky)JQ#g`~#l|npcQD&{;<@58mJWrC(sn=FI~8_diJ+JpAsAb8rr* zIi~ADbyvkn_8E$~pZ5#c3^VPAxCdfWP|`Z`9FMA^kJT!3;-B5+4G6UmRq!bC&m+Mf zuRPF!`5?9*{FNdNUD7kFDc5amdhO#+HrPqGzG+c~5ez7B{cOJonj?r?ppV0y;(2oG z`1Te7Wj3_oNFPi7^(G@DG;NCoC_oS~WTm!LXdDPptE%B*2+bwk5Pmo;Cp>-Q{Ety3 zhpfY1ePiqVrUh=Cw2Sl8HD>kDwE04NWVED$)%pn0HK-@Z40H%Z$=nsf8>twWZ3k%K zNy|Z9jGjd_Z}zFSg0li%U!N(cCZxo|@pS;yERAVSU!dE>CL$F9)^|EpB$&+e1Gc>)zLnx%FC;@V9h6d$8yDw0?I_Cu<>TMR5RvC%`qSML$=E6@54?E!vao2)7xe-XiL9E)Kf)@2#y&A;*gwcU5&-DaO z#-D>6Thh}ekhlN8?`Zm&>e_z$RUS0_f-5POVCxu*jX@ z1bh$Xvo;uF;>H|jNlH7ajNabS+EbYj7NKtUsi;uFG5wRE?$8Y5G=A8P2%tiA$Q5BS zIJuJyT9|EsL|u{di$sdy1x)R5dvXx|H?#}1l=gRT-hfxUo!iMY&3D6BK{tGq%n~5(_u*7=DS0nxiY+@wt`yj63 z?42rvd;$T$T7dVFZ)iEQdtbwbdvIi8MjyoG6j`RO>SQzm_4`vV6f@+NM~)3AA6$=J zaP~)_y!xA#uJUF)-CMWI6YahC3_t9J<`+I(uVb5E4l%96C|N($>lBFBr;DRKS%50) zsGhrB-*lTB=eStNgU!l#_=p{KqW|zAN+b5jyV17RR)1(wq|2XTNJ|hKM4Uutg5nL@ zTuQaUi)KxYE3XbJ&^25!v$vnRgJ~jmMKZJ>^t^J?Rl}sckwZb|t=rx`cJLt4W;i)J zWAz~q@fOIv!Y=NUMJ!rprL>!Tl_H6Ewq51iyE8(N^_M*1wSx$$Y*&4la zn?BpTEBucKj~upU{}ChLQ$hA`r>~3=(}5;oyrk1XNfhCQ9`vzI*M}?m4Tn9jtc` z#WPzuI?mo<<~m)eoU?@S?^Vz~0B%EZ!6*fV79M3)O^p})N{Ef4z4-0Jp=orQN$6Me zDqh2C5TP0KDj{IMA?3u}{JfZ`sAAqOA))c_C4?F!n*em^$BSJcEM_nzh%4<7w!zKy zb>c>E&NFy>a!{Gn?6793wzId#5OItIIIef8-A}rg(EqN2&g@%=(cv z?_b+zDQxdJ9?#(6J^#yy@-;#2$V?D}$P9NPf=Q8aCwgu4N&nzMnygl499L&e`C(Ot z9Qe$syD%&_nn!7;-nhLpkjrW3iIAgYhB#~o;Gc?AbdP#DI}%YG)?8fCBXotx{*ayh z_0X>&XNU6@3yWd^C%v{d;30_u3vslNLXfd=2q?84X_I>{W$h`SW?^Z06lPN#3O$^r zzHx&lP;F4Dr)Hde_gLJFV|U*e$V{Tv_*ckPrtV{RMUg4*nrApMi6V$= zYtYk#XXrUwvTrvJU%cqmIptS8}KLLP_&^%fqyZ z=d+IZ?gQ(}6As;`^i4IOz6i*L*R94Q7Kk!A4>BFb1kr_C0SGFYm>EO5fo|9ffNswr z_!PMQ7Pue~q4=jOmW~H5LrZer=|uk>BiLbJ*Y!D520b%4y}GG zDR9pPGcFnhAMp+Y<5np|R&zfXEbXFFs7$~4;>Jr@! zFK0ovjND@qnn;XVQ1vn5dN6+f^_l5uQ0*S`Vo8MefyPP*L2S8#l9HVGTeB-yxNr0e zwIpTm1+XK-M5Cy;O-NO)E-oDe}aK+4wBJ8Z2>*A=` zQ;!jSx-AZ{*`=nX`L|pG+=KJH`an4OUBFO@(yi(;D#2}|NItGMCNG+d2N}x&2Q-FS z(f5isevG$nHveUeJa(ia1?z2s^s?~;Q#fRs{&C9xcp{{m|RC)YF9%DwPhh1kdf z0)ku&m8^UVy~>JdV?z%CdRZK!l(%-we*)tX4ajavZ%J^-K7r}?Koe$2}V z{be)f;u<6$j56e-Z9$F}22cwC)JHLliUmug(z- zYlAxQ=@J%iB-j}shcC@Kc(}QHNBliJsG#$9$Ofw%*x>$ss z(W_~<9yuNuGAhdiaJ1ITiDk@4y z=H#UKk8^20Y&a+5=eV)tV2xyPm{&GpVLf}Y_Rl+#mVR213#Uur-b&en1|tIlUSM2` zI`d(TGbLr;TRL{!~o$#VJW}+xA_gDk~lSCEZl$+Z%@Ttuwxa$y@o!=TTR}Z z;h;yX75{ZJSp&B1i{5`;+r<-_n8N@XZd$kLt6EPQLd8^;Gg^ko*f`h(!U|_GNTL(r zG2aI!XK)mdWfvI0z6tmCx2Ms$HeJWt&Qfxa8B2OrN{=A@g>PLFP*g^^{9c7^K?GoV zstDd8tj_T8wK>yu4BkhZ?j@FlmRAW23q#fCeQYzgcAPA%YN%=M91_F~cp|H{wT%6v z0yI%9HsNKaGyQN1ttMKB^(p>JIg7uJiRh)IqenYyl;{2?l*3ZWTB{unXo*&Lv$M;}TGN)#Y?_)hO^ICo+!IKzxI zjw_LRjr+VZ_5v7@qG>>c5}U31%(lBSrKg=1<`}p6xoeP0$@i{=z6ZT0Kx2$W!<$V*Cn1joNh}KUKKU{BAQ;gwBCxF&X)^M!H+b!Ui|L*nBO+ zYqPQoP*%JoTn*D-9hyOM(Pg3R5_~|9M;f)W3n~U+&InFngZvC<%*ED_rx^W!5 zahXqXjOhqpl9NN#&B$Oaj%D~)9%s#vhtdFj7T|F@oJJ52eI__Ip z!EBo)1w=4x2mTV1cbl2_2+ctTCgsvyKthsi{2#9=pCo$x*LC zU(jH@?H4tpme5{L0mYz;YLUo7(1_*A6FuVeKkJ&D?6_dg9L5~+uZuU>;A0e!HnVtQE60C;d2AejKS{KLwY=WO)TR$L^00I^TE4Dbs*cZcJpu?+J z=7Cgnz>icyUN~KeS-p2|84n@y&6_*&57L{=rEGgyUHQ>8jdg_@REIIbG^ZoU3fCYa zc`e{!jn~}-t#f?XF{~JXrNq|&n;~Dj+q?)mrPW!j0T7lFr4xLGz&Q1N&j-)}7yv)N z^HHA){2;_C0LKK(qRz4r5E~o>?r`+xH&?fQTWOLN8XLPqz}}zZE&E+(ZO(h>%MKkn zB(QVmJ@Gp-+^$USHnYD?0yVfp%|y-m$t*nF_W;`O0zY!nvxHQswt?K4BjcwO1z1<6 zsG`^gbt^RE#4eYlXz>$AypbrECqwk^W0w5sY8k#GJ%<(Z+yDAw_SQFP8gLY3dQ8(o z99PrF)pG-+D)xb{S@??BoeF25W5M42`X*2D_5EcyA0SRC!FU|vr9%z#61pEejf-_> z3>n^!hS;doRca=}Q%N4=%d9LOK&~qfd_QmpFOJCTn8@TvQWQQj+|;n}Y>x>8MTgXK zv0Cpd6p$m~Rqzk4*R`|Y0{|k?kwRW6s>-1@bj}y6$ca*-b?wt3K(sJUtU`Y$ZdOm+ z_2dF4$!x@!L7olF!?MGxl!M4sKQMVf{plx~kkg+oIzzVgUt^AR*skqm6*xtFYAFAu@uxW&$mT` zx#)7u6@#d)^zDB1vQ>?ZpB*fTt{GAv=)+y6noMB>kIK3_^9*8g_)8JO_VVLLC#_0# z+{k!<$}N^@XMrOj#L9i0J*Gpgr~mGBfL zI7cORTH;QCR#P(m*G9~%=jG)EW?PI51}_N70NOY%?9wj5pUEL%-k3k{!p=G>$zHeZ z=^J~;z0pdB2OJuyr;=9D-`csU&H=>TTaL@P8c~X27@HiK_TJhUsAal4%pG=p z(J<0GVha<2nmyQ>tO{qXrb9tZ2%9RVnhbHerNZjTZ3tp8k{id8bHFe~1;`iA8 zRAy($RjqBe@D{uP)IZpCbQBruoez%k6@a;MY~mu1wgft7r=j2hMs;RwJaGKa|=9I0UXnHD; zpNs3ob56W8|`i>`VTKs!BoaXU^>Wbr_( zjYmhdn5`w?_3l?BP;sDy#dv;nIHXcAr@X35YAx3K^QH?Z1+h|B(a$`*+s}SVD=T|_ z%?l=Bm@)5)O-cmMRt384GaC9i@3@9_loQn_f}D+ArtGA7A;5Jy*bKB0-2y^(?r|(g zqnfCPR&}&o7U0o;>q?y4x6j9Xs-X_)9x(kG-x| z4?UFmm)nPx$1r8~sI5v=)r-{BwJ0`Ug>hT*K7sgR!NViw>huMyK^4C zQQMvb+#bX`ss7;8TlR-<{^yOnd0uQ~eW$)H1V_+GGNjta?QbCY8LiLrm|JLrh=4p> zAK!6QQ^}wp#3|=mtMuBnYYjmgVx1i!4Idj@?^H0*PyA9G?R}5yPrQ{?daVI_>6adl zC!{>bgt-m%KPv#c=R_Y`ecNr<+ri>i52j1>o=9ME`2MOi@aWNku>XM~N&Xxvj{EoT zD=PTnlq<%TOU7SZVtOK0i&k%6tu`*M`l*LFGw@4I>Kd?lFVr<~v0(K}VFzRWB8p5Bk^iZ-m)eo>;inXMBy zJ6Cin{$OOQ`lJ2X1ak?5WS`5+dB^XrtP2NY|1vGDZe)&eSHtHE)+f^z3Rc&#J^T`` z__~xxl_5Kc)$$a$BNi%mfAd|eW}=nFYa~+~QR2(KKS7Wb2u#3iC~am-?$3c9^ro!p zQf4S|a$VO%L4^ts@CJWcZixe_^dVaG9q*~60RAVj1~Kk)+mL38^4RhGZ&5bfMDasM z0SOTe^tgOGPPl^qoN!mZ({i8>BZUuScbC7#94xqrt^mV`0ssQpD79=65UqOA+#*(9 zgR|;QUB9|a13(}${5b*Xq^K8qC!JvEk_uA+h{p?PHZ}7(icwrLxU)u4+Rob+#WxJ- zs-B_z{0W%!7NJH4BERbg`6F|P!ERs3xb-L64<8TfvUd9af;fN4iAzRJIK@#Wkh03Md~%@0;Jru|0? zkWVcxiW}-NDktncyi7I?vZ)EcgwO(6t@Leg&r?&g-vvkuvHESharyeGAPh+obDOJ) z_z6WoA#5pFiwYf}vNCalk@24B3rRN40r5aPe%Tb8x0tl%TLy1i#AY?c#wCH z-CHsM_Ub^DjGM69Q#QS4H^BVrOzjCqvj)OZP+p$Q1Sj^mf=Lb(lt>9}7%)ni)pz%Z z8$|ZYmWwGBuul{};X@?l$hdP8sJ`arv&3RvV`mBdzyW}&$ZjLJH|Tx`ZiThpN*;uY z5ES&ZE&}*lx^`kU?H{w$#nnzhkYCAtm=G@!x{pd4RW3pRNW2o{RbEr z!=kK%Ce|yaV4w@|GY&_FF%f3{?-jdgO|1vbbiqb?YP69|JFsP?=!{=BZxLYa_p8;1 z6hFXhTv}B0CRpR|iKgXGy@|IFO()cDI+<1*f$Sn9$nE#Thz>m5LxB8|;>qN#B-Wj0 zmeGQwR4&y8wCM0(=+^k}ICWReY`1b%ZS5zia63CY9ZY5?JjkEc5Ssu*4a8;gVOy2i zNUvaPYpXV}+v>`3oV^0Ob_Gn&N}R#gLP{XPW=rP#zS_S5M1b80oX~XWZ70*;gdgyE zxT%4DPWMV3lrz&i%k;Nj<3`R!fkT+U9re&FG>lM>$2W-sAHsAn4>Ve<0|K-Si~-3K z;~wD$Fv9XDW_wzF&_lE<3%=H=Wj){$kXX51%_!Y$3-Zz6MdX` zzfy+RlP8681z8a4>Qt{a`W{XNgJzyw`8YPr=na8Q>L+Fhx(%9C#sypbYMPVY(56^L zEl7v(F|f=Kgr`iG^<%{eJ3Fr@bmq+VXj$;Dp_?e?Ua1wUmDIFQ!5c?v+@>Q71HgI}m-We%6u-OUX2+M+8za7aCz>Lqp zK17;XKdYgf~x4MkdAnBYB#`37-5((NvZI3s(U&t$iG?5Oc63sZ0# zf6evw-#moNHePaC1}+U;_4)K{HzUaAiZ`p2UY7=*X8(n9Ux1#P+y9cDG)eac33%-I zaiV#~tCZVw4x9$>A*)I)P@E>G0^4DP`QL5U#jlS*8}C2YsWG$-TNR#-Ba@OljE+QA z9b0Y(2zme6Ge%sWxMqwY_k`sveMoE}hLoh^C6pd3ViDku?1hpVV~lWAj; z0Dg?R<9@*E1eYLsO$T20qd7*rj1te7NImlT^NZ!mKHCehm(D~i&+1LS!#5p$U`adV~?tm>fg21qgtJ7hr=%`DHNSL$h-XG^Fx(jDN1`9 z=K(U|zRYjfz_`gy>;Z~uDnrZnad=pAXH#IlUW4!)Fl2c6c;E!Ih4g;JZCZv%!*Pfp3Dyq|BRKx}=iHVGm&mp1NUJR`7MH>Twd9fSR^m;JGA<5#$}B;9o_G z5ok}qGyN0`UwHs+e?Vh_hmf2+M&4Z?)_A&t-Fo;4Wb8XbZ2HZTOy=OMAU6?-N`Ud9 z&t~uO$5pN;$wAYpR#V6Dc(lBG=oAiyn2(Wzku!t1OtgIww1W|$XjppR7tfk=@ zitW+)0J;$|i3o&Za={chB*hZ7AP_lg_{GI?VkBe2hpBCbAuG;HSDM(S7ZZ+q7T-Dk zDO<2{UwM1qz`#Kq>o63`O>pAX0oN7a@I{=ZAHKD9-)@AA07S+n@zHcQdi6f^u0#Ko zw6i2bt0aN1?N#YHVGcN^cJYGODG+`P-WfO-N(m)F9KQ4MHnJ>Zq9Vb zUIr8i_0^2lYeyj@GfrPqS5R_!-*5RIq~)yifl!D1Y%YO}jmOC<;DWE|*)>NMgXuuA zG%>KWQ4G%5A)U$%<*A7vpL;?j8brLW!^8voQ5B ztTNz=9W;UFI=fQRU6jL>(2S_x@GwhkxGdGTuLV^GZtEz1?!uc7I=g~yXUN_fO1dIl$H_IQO1 zVV3bKToc`=QX*#c9$Tm4M5sv5SCt)G`S+|agx(HYq9eBl4efKgse;X(XU?AOPcz=5 z5hnLqxYEAtoW4HuGm(8ET?5e1g>*r~uN%^Z{EAYSvH=7J;CeBdV+5#(t^!d7iV*(1 zixdl=3JyN_qp|T0S_@D)#3lGzLoB)i=~~W8LSKP6K=o`LUFwc#2rH=#e_3%k;5w#e zr4PuE0aA-XCPW|;!3P2g3hl;xr?s?h3f!?aS@P3r4to0Z-eF%3G5vx03^xa<~adaCpk}FlipikQ0NzR{%Gc&a-dvR zxcS<8p5Md|nSY;%DKbC(wta4^ZK4apTZi?DB}OHTJ7e$re?{AU)vx0#j={||A`$3~ z7g{kDgp-wISlIRDZg-A+?($k=)w?q%Waj>2uK#0tLAO!ja`qZ7VO(Rsf7>9kjEViB zEq^7p%6-e-``JKe#P^K_KQzF@2jdPfyW}4~a!}v~f~tQbxCGMqeEAYt`hc4gzv9uO zN7e%y@Th@mh)O@zx{uU@zW9O1$6qr%wKGoz1_V01#G3SGsHAiz#pyk{q7&8C)NZ17 z{0ZRS>#O*7KcRAK=i6Mh=JwUxbwrpRMcLpD48*#sk$>BcwMp+e(;trgAGJfNaz-L>>4K-?X29h= z$TVO$L?5;fcOe}Sl17)epgFK%jB#P2&_?tr6OLf6SJeP4Lmb7q-@K2;2o59rkVlVD zd{6^jnLKMiYKi{~7>r*Y;t|etXJOicfk~)1dI;J=Pp<}Wl8VY>9*Gd1mi zQs7x%3yXyhTqv#;G@d>_w77{(^ep6`z%NL`Rv;I|21j2a`&<`tT?B)Ksq};n{&TyC zDrocm8p^|As<{<8_QvL(jJRyBiK;fT_m2=CmBg8 zD7dPirat@T^EuJ6Muw4BS<@4ZCqQW6sOjXP!>NC~d*Hfz$>b55WM zHLBZWoWZQHXbOM_9MT7Ng<_i;f}Y{4RKcA`?>U-9sR-dS_+#NI)a^dVdg$0CL8L3e z>stTf_`g(mR)Sxx+n&bG{%a3`MIcD6t>+opf#qBO9Kyqzz>W?HJ}?*i6f()*1x6CiUw0D5^Ia?-Wr!(T&SU&gI{%aLmP!2kT{s{&6Y>0jW0b8F1#JE=5b}PQ9={*WT$b{zB3wJrs37rnw zOsq0!$AOyd4Y;yB)WQE%BAi$ie@lRWKPE3uG$jb7C|fNA?>raVzX3)n9ANkdOpPD& zQIfy&S$BIuw^c1j$SqrFz{J&cc4Q5{hOYeVJNw6q=K-+62a83`3hV%eSy9>}jU=KL z#|$>MOVHnuB1HqvXa2u7p(tBC=)V>AqlRzc52`6BK284-Q)}9v8;#OU{AO>PThNto zwU?as#N51@?^=w47B9-p zz(U&h-aWKch!6VKd*A0{G<40z>+Bw)yEu7r!iueRRr-5QaBI+G;R11du7XyOXo2ww zak8Sj^;5E2OVDp1A9xi7NF$dZPWutfq<)yjwdsQ4^{#rl!kiZ|8@wYDes%#sa|4HW zuGN}X-u2)N&L`ZdS-i%P_{e)5vcWz6*`WE0h+jY%nQ4i}4(+q4R!dJ@MVmGhwP7ly znVl#9S0o(sJSg=Ly)2*-FX!q^fy>mQSS5C2=l}xqUcq-r8>gW9z>y`aj1;$tf zqymx(9wdtuav6(uD_76vxVx);F}!q()sxC)`gz0t0l$Bg_eS)&4EJ0gF(G5z&?yC8 z*}b^v>)iD|E{<_S>4C%s)h7R-&`>%|y#UxmsCg0)1o2YteCr5`tg1)7&LF<=B3-7l z+7Bx#{sT0_<2IiYJ!%tFnVK53;LZR#6_sg!4!2ueba0PV=4J@lwIj zz8o$j<|qWrNDM@zv<&SX);bFp6Le4tLk>``={!0=(R1dQvvZcAD_jfS$j!VX-$uW2 zdK-f>dl&F?@i|MKgEim*9 zf3qIxLAT-smAjQylHm!X01C(HtG*ck8_}?j$VE`3a69~%PCHG%@#l+t>W#m0k>NNf zR_PYYv1eS1S08XN6oT+)WS5>lzxLAj^zZR;VpPW%xF|&Jr&h{|igsAPuCKER+&xr$ zn%6D%)K190ad3+b?ZsG>g$_CeR#!ifEs%*kek9n@TxqpETelL-n&EdmjLf7H-W z;7o$vj?C+~O?1_>3KkZ66i6!9Kux7eZeXhrPGtQ3xCeUVcG*il{xGU#K!FMf`U-Ye zzcot33Tt%)ZV5X>u@GQ5kXHQMRDoS}XbXm=v94Wv3-f#PCR0Y>D1mm9$fa?HF0|w= zKC5K+{P4S0e-CD-K>x^h{j2HO2Ye}k9?6$GtnTIQHGYrE>q;y?-bedv#f>-7e_jPj zrkK~XPs%TWufF3J;0i>V3fK&nA>iqp(y51FOr_UpSbRS+U1f^G6A^o z9NKn%I{)=q?W4VXy>An(kxX4x%DwT|l9C6F(&zUWc!?`9)HXclK3wGmU+gYi5DW?m z0^_)tes&sKVhcOrIXIH zg9|Y;G}q}rGD_?9>TZa8n(&m(<>7Wn=~J47=N!&4NCjY7bmZ_0KME60VY=+t%xAgh z3Gi(BD##2%RGjM^86xbtL!Ic;jvpsz^GdIsz#Lyjj6Csc zDUDgoSaPeJ6i2bTz3~{muG*hBV+P3Kt6=4lK1twmewv6`8OCm7<}D{MaRH+Pv$jEw zwn8VzNgTE&8qn`hG+^qd>j8P0Qfp7~Ex2jO6g1ck#=@^#ZdJ<|{!uu-W!bw%gg?L8 zwD{cV*_ouS)ZU&S7n13tb0ABM`tU(_Vk~_viPaQ*FeB2@ZRvN|tLMZLqk_yce-EP( zFS~@B=MEk$O0Bd*j@pg+FCSL^==4kxzEd6C;LIMM z+A@TG)pL5KDqg1d22)MbOS!I9b)NkvZZP&U2duuZT&kNX@8H^ORvDo%lAL?w%$Y~M z6n|EmWwN&}HoeyoMyPF9`Qh_#9jA67ni8U>Y?j~z4kx9dEl9Z4)(&lO|JrHQG2gzt z6f9__FyB-;3I|5kvg^#K5fXT=w<+Afaa1bOP8My3i}S;&-$yk!F6rHvaTsD&B94m5tz!NbH1fgUmZ#zAJ5A9SNeQjPK%nK!jolstV9{(8>4-pU5xt9 z1?#vvWnyp)NjXit>7`ig*pHt}|EX2F7Rb-bPZr_lxy$_Fj*`4~_0piLe(-(p=T!Kd z|C&crdu+t7bXq|ZP%Xv^5ovrxs>kwU&CTvUS2cZl6iMw@VapE;z}gYN`V|8 zlC7e?=k(!n6W$HzJ^G1VwF9HMtd?cAZ7a>Go{3Rd zT*dD)N<}8S1m?AO z+IHOE$~nh)Bhf!$DekjW8t3ATt^HQP5+NNKN7|byvu`spw5@#SF>(n?ryV%6u9{2m z5d048d)wV^rMe9>nUk9qJ}hmnI4?uO1=+>(iuudkt@s-ZzIXPlTkc`L7&iNI_3b7D zhlMbhUO40T6Q2?!>{P9ms)p^WB?xUzuU zL8(B_Ct5l>5+4Z^MRu+?iicU2Kn#tIl z-u}FM?PoY&WJX?Y9?+xO3Oi8%#o>lAh+$CiNcK50A$F8rcWHZ)BE9Y-d^MW!LH{F^ zpm*<3Pp;g?1Unv{8<6i#IfQ+5XS2yjNccd*XNcvZ((~!TnA&knyHRkd9wSQV0vR|Q8Q9mfmyY@y(jW`}EI zqXe|s%btJkjI8EQkbk2(*XoiW;8i)S{2L~=P<2s-x+_}Pa!JAV*-z+hQHs<;TNi8+C z`&m;^CFPU6-Itk}jWKx`rL)I))SBRqrISuM4KkY-%CWKvCmAzqTRN94*YzkAiM6W# z$aGz?K1N@$vZGb8A%`j&R6`LEQMUvT{Z|!~>2+EE>26(d<{s2f*7$8$1cATl$YT;e@M0#90J-};TD7wQDN~if5{;G4uQN*H~;sKSXxUh znOhH)VDaSIF;S+*9IvPXM5d|HM_-c!m3vibi$*$rE*Q9!dzD!)%Z|yC`*&+Y*@&4+ z$6{ssb$(M3;eh^t%;m+9A)$TeXI<(W{ME{dcpT&rlMRONVP}BF%wu!IavK8IiOKS1prq30-$(vj2%AEVJMwQBIUn{m zF_H82v1f_57*fO~RDLyWL$a0dHwk|6Er>Z0-LuCN%2{{&m{7lffS)1S`UQv>5tElE z(oEF3GuhmYt*s(b%4L`kh~zp5J4VV<;+k`IyJsY)Pz~jO2h8VIHgn)vwzW(F?j zPOUt?B)zfL<+R6&i0pfT=M)NOuPw(rA!pUoM7JQ7bLTgS8@LJSSFc|Cqi+vCjs6g` zjQ;#DQ&Cqr^<$})Z&%w?#qy1%VY_ zo7npyrF5V$85@T`HC8w$K)qVzyDjMHv`qOcU@ ztdxfYZe-zB#nzSZL*`RgID3Rtuj~dm5p~AK?d6#`nv7EIGiT;ZoL#PHu6mmA zgK2H1w0|b`Y5okiTkTeP_Wa9bQ|rFfKaqLt@bm5d{2P^Eh*A8GHU>SSNF|Q=qHdo- zQ*iD^LkMyHdeHIZhZ?x8in%Umh^(c+>9%L|pO{!!=3S?QGp79jq~h?df*sN?(9qW9 zr*n?gA~m`DhulwjTT6${Je&=5$mqPb^K(l{#;Cza+-PXY4eOzLaj7u&1EmnA0PHLX z)0;k@AAhYuLTG?` zPVap$EHmQWTT)s&)}yez9%2OH+{GcwtaGXol9I;Q#PXbe=4NK&nRAct-xuIIW-~NA zTG}JyJZzlpG_~$WW~=X1oBhQ{Ije^+Y#|!|`o&d;C*AGyrgBR11m*{YX1roqW6sHs z>J%G%&dQtqSG8U zg8Cw?VgCLJl*1jnVh~JEz!s8qY|t`}kv!qn z#4NiWj@p>1kD9#DhLn_SOW?_B9aag1t@Bro0(}!K`L7SMDs``;;h^96^*AKN#CVa& zpRR}eC?W_H<>Gk7yZ}@cZ%Zp+qgt+ch3#zD^6#znOkr3G7Jwy#nM<=I@5^@q~9@ZxNBucn{cPWe6#kTi#4k58#2Bvjw1_MNynrTW^?)v)Vh7|AT8a``IYCEi_xsok! z+MGFZ+(l@c>uY=xmUiU@6r;p1P+3Jnp;oUxgyDi9c~_R+&yZmRxsEPwSmgsZ4^Ppi zKv_?aFL`d!9|9nWCWhHhB_#~$o5BOb||zrG|&Z5Rt^k)`-OsA(b_t>*Vv!+y^Fe`2kZNI5VW^^e16MscP3(j z)kQC2W3Q;!8d#ln=n*3q|PIPSPj_--ufm)aHL0JP_4lN7e4J##p4^h9Vv@?LukZC6 zcEDD_40;w?bk2p`q8_lxp3{|px;F0LzaG<_I^`;?pBs!s;3lNm5|I};n3CA>@Vcp( zguKu1-3kR=@>noO@9R#rYu?-2JY)|wqlXa}VqwPW%SL@LRt0x9;InOWTsSZ-|JG}G z<#4Zk}z`o1g#&zJ=Ug&V@(^LqkQY;&&JUhIs<`F9``1BSP2OY}S2$ z{@ik?nPbSJcpAhP>gUmLPVK|akrE#M{_G-K7u8d(CESV@oyyKk18g{XWlfJi;zMyF zw^hPjK@vl%N*ipZz{FQL{#k1>Q8%m}FK!_h7iydC>8V#P<`T~gcbZ)S!b3z&n8A{YmWvCG1C`6I5GEIm;lw>%Dq>_Xrj`64t z9U=29eCs)S-|zeG@7~|--g3@=c%J?2z1G@mD+(AiegTeKW&#UZMn4?Je&PSj&e75g14t@SA-OqJKFVJ9oP+)_7-Q!ZqE zjcaU`G#pgw4x`b`QI_eNnl6g6a=)s~0K7ql|AO0Y{^{s1AlJ&Sqv~)tkvUC(x*-0_ z9ts*yFM{vP)*SC~f*S@0_t%?!uI+Ssyh2p;nsy4)``;N& zSm#FDgp>#JGR@Yg=_0Q<9~C~5BP?0+I~b2BD^zObPj{pip}Sg z$f8{%VH>NF&Us45yZ+J9O&Ht&RoS~qu@wPEeLLp(K06_W86j;`C$UB_4HcFcBY6re z^;j8IplQy%W;TV5{!NnEDusnqs!m3-1`M8{gTvbGV0QSRqZ$3D?zVhxG?jQ6YacRs z07vBIQ^Ig^qYe&0bOm+$TqK<6d+0CRPo<+r@YT3TWKlaUChbtp4`ho7on=ok}{P3x5g2&W!`ut*gUEP8L zv#Lo~cvlm>E0idnUN6)71tZB3XmAeQ-DqFWFlOt~_4KL}6)EvIcE9WIY%nyR$g5*^ z0W$%~+UtofG7P1O=&)e);_Ct+Wt*lJJtcis6OuEa-Z~LkBpbG%2!#8Yzx<%Ail!c3G%zN?euiCwFSNNo5M+4A?Ep= zWxZ)_VzSOTItn1Ebvbw7ZbZa4={{mHQD1+8L5JHk=);3URoz{qZJQi_ZVo8VUWIw^ ze7q$ePf#o#RvHq0(}xd4B97ixloT36{pws2B-l1*3tCKFBfFvOB2qb^(?n##V505| zNnSZ=H;iM*USAbX4rD{JD(rSiu3r7B>q5}DGR0-*vBpD=j~1^cH@x{Q`>>99ws7wb(!P3Ki?$0#2KPFM?*#jLEYX(r1CMXBlO zBTow7dBss-nDZnFaM%kH%q2z@FvSYN2f%?zp$e{fztzJ;on zFI~Lo?o}TO_448MOw%}Y-Nx0H^qiJcQo=}~E+>wDL?ARI-y3Q09lYNPziZOk3j}Jg zeB3!}>}1eT5J(r$kYCK4osd4V+2ktNhA&4K=#MGmepjk;q`=s z-n?1MG4OVSU4TKV>8;)W0G_?EA47XK844KwTZsP|w{6bBi_35ilH^F{;y0YShDV4c z%Gg@WaBLr(fr#-fzfa#hh&MnH9`^iH3s-`{Zk6*@n1^^MuV5|mz}A*Oj3Ml0i+f!M zM!rIm1GRoptPDPH{GI~YcF7o|NycX%9on|1hrt7(77` zo@HR~tHr-~!wl-{vt<8NEt)({;6xPZ>OpTLD(v3q!AEGVs`-h5K0imR%uG!~(GbEY z5?!(4U}|It6xQ50(t5)lHrR)cM%A9fseRvN_iG5n(A2f*iu}VCy~y0WPsD2m(&T&# ze=DP*QJKT8%YE;A&E)^7JJE;W9*z+a7$4zdR%K{xyi!Uqq=T+1;qMm0z9)FZ-@xKy zq?KgqK{bm(cFPdjNZ&QOyEzOi5f%l6g@ZsThAT1-Wffp>#S*U!a;ktXF%NS^hX|5R zj1x#cJd)qgsnRs~h+S0vHsEeO7Ul~20zq1{h*5R{pfQoOb3DMKM%DT1xfCi;ufj`2 z3xS2>0rPER(TcN1R#pI! z!!OM{%Xlm4{v>%bGe56fcS#&Isywp>BqS;I$C=k8Bp)l-Zz6H8sL@fBN!ee!!{uu9I8$^J@>A4j~(+MVH|r9RXZE1>SBNg`&jJ{LI}c5FLT=` zg{6^Y^RtXYaVh9jki=^{m(}Q9AirbB16c2&a!yM-|6$lRvw>{CR#k|izLM6-A z+4Dm~?A2K+kv5zM`5pS18V^Z3&*nxr|BRyE0vMvx{cF#0lsfs8mBZ~CAG-%{^R`y| zZBeDjd8gHP+e3`uek>Ac7;+kj2V`%g+}QkafMq_)^tdmie39QOi+pCJ{35^QL+>f|eJo9}h? z3K1jfwXM+sNe99g)`<|O&11)EZqU`?s{tOM_<48i`lm=WA*>?HgqUL?tJ7Ywdwpb? zcPLPEcP|}O+o~JAd7?O>2SspTGy51-JF*w&>Js& z>4(rrtV__DR^gfd{Q2juv>)k1L7s+JO@A&XXD{{!T8f@1#!)?+jxFR+L1O_&_C0Ym z9}zspL`un<$!B7sq7^ii!iNt}89%ACJpD!QZbkY%&?7v_odonJ2noie_c{R+fdxo) z?>1>k3(2uXqqZWS+fD=j*f{=MMIn}tK_?HvZe}yQYJ`P5^yL@nunwVyL5pcz2VGXe z|05@Rfr>YCa=*+Sy*0l~UoBy;MHXe$8aJ zk1XYEa(+)`z3AvnD?(jT_4~;JnqR#7@Xj+z6xfc!DEDX_FvyhziL?|uoL(gBzOFhF z;Ti`!h8lCHKLDOB-O#vjedNKuVih^LCD6DnZ?=D0dk&g0@9C!aPMI8oC8ond`6?8z z^>hj}^coHhRL|kNy~EfeV3Y-?Jl17qgC|0!(id+?AMb$(#@c#=1M60U2Y5lCfdWE8 zfuIBJU}W^cJMrbqx|Xw6(s75*oC}ysP8<0q|79tHcTIP6&p(Q*UoqZGB-iznQ|Nzx#}@dXk5InkYiRZ z97bJ)p9jd$|6{#Q6j}Cn2kg?c6utjDnUFp$lgMLv$W-lSYbIJ_)CR zYsKbw>s$&!|C#!tOeXr>cZ2Q0WtQsDm5D1X5yk2mjn+fyd~gm>&B(7l<#CI{rIa>)Z-aJvq2aA^wQ(v@Z3`n=1$69C|utc zS=w5F3WbcIeRQ56`(X&aCDJd+PFxE^N^$u13bxLHcO`rVZWi|O>DvzKxsn(Re z`ku=d9_d}ps-esF2)l;+!fgo!$3ewHN#CTWuUxdE(K~^l%q-8j&S8V z5CC0W@Gg)K7@gp%`d{%DWnoBE9ZQuI( zjxFKKEPB;`KN>He@L9@}(c(;yMSEQLvZU+kYij0&F~Osp(H|xDJ6L*n*=SO8`*uwT zH%F>9t+Q+Vn@8ElTZq5bqwf_a@dwdRAsnz5hi$&jt~03sCmd_HL##@44>~$RR<(mT z=uPuAN628Z$g(~XnV|j!n%tkOVg+pB*`EE=tlo#8hWH>lGUuiURGV<}i98rur_Qx_4||EPC3a?{ z*<$^Ao-7rQT{v>lg3!EGY{PCqBRD_S-AyqyG3h$yS(dw`QS4V^ymZ9husWC%tRZLR znU{?k0-85Kn;J!opc$JT_f~Wz^=*qejHgjb>Ndb0@b1PSIL{9`KNJAmJV;8iC@#g6 zHz6t2v%vB}wzv-DEL5DxRQ$ z#`K1$K7RFDM>|!o;RNv`EZ&nMk86MxLo+rK_bf5_q64CX4+|6l4UW_c9vxM*+Hj-V=7P|<XjsPWm~h+jnMFizsq$Ta~%@h+Gl(`1Pmuq>f)Xmrzw;~ z?KM=Sy$JN2w`X=t`1KC@3f!8(?5({ylbOqNwPIZYrF()WUEjBGG}$0^G0sP}+6>+9 zu!>1M^3VD~>nYOAghS=^>1RPcaf@d%*_yt%XGhM0P=u}LGh~J^b6WsFdmqrq+Xtn} zpX21(PoX4qSiC|mV<~rpJL8BC71CJ2*jss>x;Z0z$bD$h5ic1m#0G0h z@wF}?jJDAm7@y2habBg((y%6JD-rh%^%*!hMZS@bnKNgV#6gX{$G4%H3j|8A`QzVQ z5@H1WQWso-5J=kc(J}^wj4Epo#YT?!QxjujLAzQPpihvFVWxxY26dbd$hX|K{G`Js zD5+ZNI(Kbbu)ei5>%|07C1W~^8_cbU_E$gEfID6WfIbfAwjV#P`*=r;M?xh++Ud0| zff_tRvm!dUzQJ!5PA>b*%ow+ADHtojRM2zn>O&Ld)%{7|O#5XvZbS`A3YsL95g`2?(QBs@1jKjF1dM2xO(mm1ay%q&-IEakjdAx z(d2f;nGyt1$h+sj@_O(I1fHZ6MW$$4bgrrymtD-LY5t|XrR(d%w<0|UGMnx34lwxX@k`N>X@GR0JFiI6ckUI2^#Kl z3JULOYm6~$)$Cg{dRwrRiL)U&#}LC4DF-aSk#2nmW65M+(%6ncB7-|!CtFapOVvQhUQ4U$-hZ)&aU%_ z1NDEP@{zEFitDjk0%=7>tyKOo0NG+qhhYB5C76Rj*dRNEy#H!XLvaTJ?AIWX->r$z z9d`4Zo(>KJXur7ToFg*HVsqKCEZf&!whj(~7*;D8!;j(z@o&+9j5c|RUqsAuh9S^p#lV#W36#rQ~^%2rB!szl0 zkTDb(bjRl0Dnj z)>p{yuwKMh)oJOIl=Sb8l^1Q)R{57mOly??jI~L1cX+6UYjE)HGRblL=GQ@AxHuem zUv|;ddB(PHRl9ERJO+}GG1Ufah!ny=wRsi@um*B}U82#LA5VT3Ly3!I6DJWy@$PRC zQ6r|Li6soX9aC!ZVllinBXMLvZC$Ii@kg4VA9XrKs9$e@w;Uq^o<`j zl|Rp??Es?;qM(D$wV1!u2_gwJd)x&T%<86LyukO`2vm8xnNKsEWD5=K!7RM}(r zRj(H3*DalpFrX(C_oDnVy1RGuWEY^?HO!yVu_`K;o34hWobx$$EYkc)FmS%;ck?CIBsO;;M5m~b?GI^S9-O6q2!sYPx6RezPz zFYBvrBL@u4vvq#ow{T!SvZhMdI>>k0_6Eu2cK-UcJocn03V%GUM9NYPFZ?iYsuNMm z)7&g{Mup7`O!u8@Uf1oN$5TKrwH`+Kn;>Mjg@!muY&Bq)&DP7>+NPGaswpX5pGB5m z+3c7Q(SbnhkAhl`81&uS`_irvUr{u~u+ zoA(&3#{^`nRifL=MHtgKJw=DU<$*&y$lnCrCWm7dcjfpCXBUemYd zzc}t2tFF`jqA%m+hyeuJXXOPPCU_J%_(1L*zJBZ#U)@O!>AxloU^{AzPFBx_C zW>6%$L8sZjy*$EbD&IEcbHT7C^fBOC`9Rd*M8jyFhE_H2lqI!#NOc|svp4=>L{#u3 zq)N2CD8CA<5Y`iJwq~JJ-t|wIr*!=IGSnRp4N~31ZL^H2jfbWmeqBF3nzGc_^=p)< ziTsKF+FV-X1O8UpwV9^YL3&x(yp&ej&faUHrc1>OtL}hnM|B+HGhOyQ0`1<=XfjNB z!0gL9vSj#5HA0urb8_(*Lc5Aa6tn~Et74rkvy2I>T6zU=FcJ4a(8FNvPjWKWB@=ki z6?DlsCKOF~sG9NGjwvm{OAug3SUFdao-iE1*y>u=$nEr6eSn)3N;p8)JRa47f?XJv z0E!wJTK*PP+gZ5J?b;{1FKsaUyGwmE>sj#X*OS>dr*579V0)dB8(gADM;XvRoiN$| zIg{R3{n*6j{6OsMZ>iPQdPq-bN6XnF^0RXLlF@DDx7!sl;et|2epdX8rZ|OI7tscp zhKzPf+E{neTm=zryUCZ!ql*eB$<&^k1!QGwQzA5mNGXaU5iu97$Mf{_z3IPz@4 zHB!%oeymIIp$A58uvZ^#I1d4b*Z5nmOZNFUOr|d7yALfet16_;`-uhmIQ*nvOV69E zREx2^655^vIy(Hq0pEVzAiZ!9GXR43tU7CBvj_6s(#c?XJW%v@kV+bg@F1UbZi%+p z$d(%pxEjm|xXwO}|KGvo6|-??E&smUw55i-OJyC)!|2nc0o~Ddc--$Ni_G$!I_xtN z+Xqi6=Qb3Xd<+Z-05{RQ>lZLhSeJfiU!OlK{L?*te8;awr&W01tKBCO zR4GC;SkA^x8e9@<*kPkN5GXd1G*r%RA*tgZF#BlZMlKM;`Aauq3<4nOgbjz5TXXg& zrNxbzeW#BV8G6Vnn3v+MJab`M@iyn(7mD|7Ti|o2tM&S%`qFE@5AJVB zZ8+xHBduU?=Gr$^`?`2+2z=Od$#rxY#ES{mqhBkM(Dc+p+ZHC;ntOw~d%qKNLSbN< zD%5G6=Q!}@2#$2Gl|n#!dv-kbR5OG(5P-q8OUh!6zcEq)lh2+fD1%wYeT$J$aiG3M%*-!^%|vxw-7Xe)Vac}(I`JZW8_a(DnvQjRX{j}{E#2sI z*JFjeM=99B7pY$TGZ(-4#uo+Tt!!2Lo2b6*$5kPH19q&TmSX7yrW>Aof_7?Uvgm4g z?Dg)Qh}*OpHSd@RYSod5nJEgL?6~^ryUQD^7PQPvafX||tF7ENYI|t9IeZ^y`sB`z zGw3_8O(z8#0e&HkqxeOGpdl9N#CN8;Y7_DzZg$Z$8T)_rDDEL!J(3`@0s#ydA%FbK zp#DGUqZ0~zmW|0zKcBI>z?_O)n%1pdx0r9YK=(`ovxBX6>FTKjIZ*Dp7ni44VIj;|K=Tx@NKXcFf ze!QMM5#04#r>LvMcE%;U<7fTdc|u#KMFZJ%NxbWg45==AwV$?uDEQ+s&z(?%0f19}p;7pZTap)aI^?L8`tZT^;Sr z#LF7|Y`iWoR4$|6>^#a6VhOekznc; z57v60@y0J(TNAu@TwV}4`coh&DG6c)^q4L^8Jq>}R)YNV3+R`V+_B@f{M389T}b3T znj2g^Kk*@_sL$$`llI!#pJ%#CrevVKWlgAs#ZubJlbZx8LQ9|#s0_r0l;xGoVZK`K z)m-FTWH@>U$uv+V^Wn}~xb7{ULdy}?VzzogqUK}rv|nmL+dO{duTJ+fp$9NDq~~)A zuAi*S0FTS%KOgc7CcP592 zFL0@^8;##+MN7}f(@V6ay9-_18CSU@aa!+1TP|ZB8r4yu2|#KdWu?M62CgI&x!UF+ z;IW7169nF$3qD5wMwg0f7N3t^7GoOtId1Xapa_eCu#{3m;D1 z4&R19x)KD-l_n_o{Mkw3`x^+ByBru0(i0IDU`9MMxUcR-@+wWFsCQ_pcY1vb9+%KbVV8|*gd?hDxB@WRsL1n%zA8drFjZl;G zG0Q6Aa*&7=&)vPyr#A2-i~6u5?tbRN#PKI7DV*rpPO0f%@U`b6m{qS{&sJhr3?mR2 z03+$^Z+5A||4T&slcZ;UZz8kK{PkstvCaz6DAj*Hc;ureDjvH zRXBYF*S`9C)K>WQtF#!`!xvm#d47bj+S)KQ&}e9IZxk8i2ILPIgf{IR43Azte`+{4 zC-$k>?{B{fIYbX2LIdRFERoHRTkQ{vZG8G)ND}9kLpXqx8jmTrcY{9^xa=6s6_ZKy z-D6X|zP-b3uXj4htqe6c5(Lld_WN3$&xZGyiqsuJJ-_G&D$D+n;o$+9tO4E{wX#Py?dBsV;H_ zdNIu=s3lx30UWi%fXTW@UPIMfGio6A1+bUD4&M;z`O8%uDx>*LKkx;pnuDj~BHJx6 zf|9gE7cf9HV~B^)1$jRK!`)?QuA_by8^hf}x3p)d7aVwyFB@ilA8V9mfWC$Nkw#n9 zBfG#rK(B#ij=mX<`^xBUz@8t_jzzcl;*~44G~0tHMpA-=JV{;(Bmp{HUVi?NUF(TB z#7X2t)Ue`%Pw+m1I3Em5%@_^^D|WH0{yPyOP~>0)pskO0UXK=6L?pcAq6r{@NszIPC}F zht%If_+(iAR2P{%_qucYHrLC9r-1n`UL4L3p9>lwjQQjEfrrnW5?!tX1B2QmD|{_9 zoO9R#=i{m{CYh{_>>ZP2CzTIwyI+B|hK^uw@4*@aDvS`M$_J*W;1_dF=AfVk1~kBx zpo(UT-XM=!pU?CbCA<{;1lVWRGhx5yUS!D*Q*&X*Q5`CjB$FUP3f6YIuf%8M8bbRMd8`aK@Yz;+k1oI$+@vTigt;2nT<`!yStQ_`@aKE1cHIZ0!iTjAYHB=RT`6~39cM(Wf!(#n z4k&UYKvgv|BRH(GjImVVl>hlG-4a;ViKw`mFfx(~va|v-HGBb5dZG-6&ggL%o<=i^ zeRygtLkA{|A?`q~2iY7XwaI?Th$Wv|bqEU}v1SQvS{?HckifSr@IhRJ5a;@|XvAb>#TmGH z?g$fCtMn|`&dadvJw$4)=4@bPxxiQ!RO)++ie50Y>t2a@% zN^ajCIjU59E(_YEe7Y;j6?h6jnsrQ+n3AFbMeTf)WGxbYvsp{EBFvc~=6h-1(n-X8 z7Lu4tP%O&}3MToV1B7Zv>zmy!oyiqZR#1l7EYTFa1_~F-8$YXtv-BsB+Tr7!&l5VC zOXBqG64xx#_myDBfh7QMSwlf(!$O4nNY1(eXd^(1{Zpg?VwpLN{{nSmQph8Gz@oGSSAXG1E-W7(RC3GFpPedX^IeDD`y^ zQwuO{>&Yb@!AHM;dqEy=ZcJZCq<4_SR!D{YY$Z& z;1Xw_gl&q;cNQ4ByDK7KViaZ=hF}Iwuiyp(U`i5pf#+=iGI3fG!I;*g&j10W5q8<4 zo?Dtn*g}bBmWO2Iu?=`s5LiUqxdV5c^%K^T_}Le;r^v1U-JK$e&Tm-3Q2-*4I%~`* z`+u~AH8xb;s+2AmLBfcI5S^9eg#A6cvZ9p#o3`?yn#*MHiQ%ky+xh<1Cs;*(`t->t zW$tnzArSh4sG%@DT42fr`MHtV?D8>k%t|@FaT$V{nNI#oht@EJ>*`iD2?jX**C0RG zoBXEcRrV^5T7JJ`0mN39FVDe@3Xi8nx-ja>J*lnu!}8#>20Lh7#b`-@`hbQ4K3)yg zk@3Gvum=ohAC=UR^dbn+<jFP0EP$?1(}IS$v1{zWns>?2Y@A?m~s$;JhbSi zkSi~fB~SXn?AXnC|uYp%~! zUWY@#pC3WSTnd_}x}ia_FBCHsV{@I`uXi}$VE*$3hYmnu0`qR?AFB*fhkKtIbh$x6 z(cy6Yzkecx;_50dO(|49on<`Jv#NFMoqQpB)Th$$ZQ=Mq4mze`BDiS!M*g`2EC6Mg zr2f?MebrtbeIT7uR5-FKa;EBB*0d?k1y2x>uF|G?^Z#=V{sKZ63O8eliGf3)Dy~H` cxo6b&du&SH@jdhQ9Q<`qQ(Gfl-Q4eg02i7zmjD0& literal 79747 zcma%@1yoksxAqM{N(Jc_5G=Yu5kX1`5$O&I32CHJN*WQBE(xW(yI!P0q>*lr5DCd| zZakiI{`cPRyWbd&agM_K?zPumYpyw;=Qp>XoUFuoY;x>Vr%s)}FDWX2>J%FBsZ*yv zVPe3){1`UGJay{wsr#bB3Jx(VvCaw#vwO{l0p79?eDrAF>+)`Vw!#Y&m#OrMnmym^ z8D-$u(f%c$tEDkM<-Ofk*=ybgV;+|}L|zJ0;*p^fdf$DlTYB+1UIdw;Vb12^VV&+J zGM%%|gW-;9%LPi&!iMgSV>^yOAhfx*(h=S6f$i zTF~hy9uY?*F1Gg>T3Xu5V`{9E-!{YAGDEAo_=E{h^cEUAdR<4y`3n2*9%@+2`x=6t-o(8dB}l>I_NUPVV! zz&|=1SN)za%abdxB3GceMu@%gt)fJ%{^9-mFCV0cC@2ti#tGiMrl+T8d34~IoSa-( zx+dtneK%2V{m7Z&WCA8GEe&CMXn$6@?8{?mX_;I8mgUYJ>a?`9?nPT2QgOMjeSNh2 z{6p3uJL4tNjMIlZ4^F1Dj^S$oK3dJ|yt{bj-ANJ`Go-%4RpgYFo1KMC&R1!LEG!sj z?2N%r#@us$-b;$K_Fuq5;4D;Qe$T3XAyV20pI*GSxmiL1mr8)}!i5Ve zl@9Fi!}RoI&E#ZK){_S?EaCqjpC*7`nCpms70GEt$HDPt=bP;%cbiq@^L%?`R}Jc84>V&Ex1nu&qEdy7uQRJ#ezFhquPb+{{8zNQ$J?g zl-3lplp30w&y5tD>uV-&uZ@RXjdM7|!om_E=*$Bbyy|V}W5L20*p6y+b{JAV>!WMQ zkx9OpI;XqGcm9sr#r^viS%eGVIf7mPG_V*OjJ~7Fjx0|Tvlo6;GAIe zjbdUPqnYWZyyNAe2Wdvr&eV9L_fTi*u6tqT)kRSy4LXOVnaiNr($SpYpck3wX4-M>ipYx?{xb!RaL5-xQ)b?a+vM~~UtLi@&t8XA=O`T6Cp z_sJ-v842Kj@kmIF`X1R?TIwh!yX`Grm5%1=u%@D>4#py294wTKJJc1)BQsL_hNg-<4?uT2-w|7Quc)kxERc1G@w3NMH zE?rP#(w4g`7=3E)OdT_9mzZufju3x;kCrD>f^|jW&JqWXmnB6ve>cPz>o3=ssY!#W^0eVHQv6@J+6#Xn6_JsxNWyYc;@U` ze{}@89?9a4yyk zQEX6-3nCGp*O~LuPe3-vskuJjdbEP~{yp91MpAA4!9TtOQf8;c=ID^_A+!#(Rc z7C7#fhN9T~ktV6ANXyK8o|>B4^7-@T)^|7a?7yo$%6rms3E6|N429Lyq6~uXE0PG~ zeYu;?|G>W-SuH&&@@Z^(jhIgi4MjfoPS(CW%d<9=&A7Zi9OE)G%3hnmJFURCW%h(g zk^tFduT8$_Cz&1}9qulEjAt4kA|hJo%OJt^DL(%)n=ma*w~udMJ!rN(b=V7wzM!XD zr+AqzrN?+;cGkPL_HM>FJ@Ho)?qai{GY=m=H0C02S(>_Kfsa;qUcTdzd>=y}^^2hF zEcFt-Z{>FHO~YEe&QUwO2vfw#+A>QVSJGR{{^2|pR(EAB#xR3;CC_LYKKpxU{qq@?^ZUvtq#0KR z^Uih&9p5%8&m_A3E}uB3t3yJp44;v}Grl^bQ9WSDVr;O7?p<75@X_JEjgs-OzcRt| zBaVqC_9)`xVrI>@a8`-CcVF}kgoTBLzJ7g~?-Bt))@oEtRFwaV7pF2+3&iuwcRSV5 zge^T4Y~Cu^2CZqD>88$7bYvMryhk>DU+!9gCPPS{U4pL=TD-C-E@#$0*> z*_yB0W_e`hQW(T5`NTb!m2KG~Nhz_i8cmPTV;F4;h63U7A-mw&vu6&!X2Y%ax6M1> zlyPesa(cdYC0cioANC2fAo6fV84`un4Fw^eblC_uBF9~K*oI01TLfh%i~NX zo505=Q}ab~KFiB=^z`bLsY)4%3O7PwjwyJbVfrr* zj~@!6laP=|$K56y$k8rwv>{`)(*m(%!W2??2i*HXjlbYo?!dWfd1j<$W&hVN?we|G zWQ#gFmUX;|gA-tl<#1m`+_NqaOKa#;Hb>qACwWb`etgYa_A9j+In~2isQQQFigXJ} zZ!S>aWG(s!1&LW%v9GZ|Jr5^Biu}_eNAqP&=Dg*9HpO;oM%I|&Sf!)n!-w-TM}sRg zO>DS4IlWUCnlDa>q-2y=?@r-ls^ryM9}Z}{Px@Vr%Y9lIOr6=-`A~{^z>)myoJ@y) zR=`@NnB_$zz~>51eay^kw{~3}<-fhz&dH;hC#P&GqBuJquParhU=cQJB;tjmNk&En z>!H+cS*e5!XQid-9+eo<>#aULpPzYS zjXMTRP}fo5a6f&@W;S@L*9(j7CgF#AE^~5R)BXfh>xG479teMmbF@uAH zW3sS|iF4YQohnx{gq3`#72h$M9p<7{|1eWf%vUEGeJhl_Eq%pK)11~=KXG;8(ZRqF znceBrpK&huFmgePxcV(%ugqpcI}+EfIat+}O3;b0v$GQu6Z5X6C7Z~-dtyyvRnF|s zS2aFA;h@})XDM!}tgNKmobP(|@#9q%jndkup(Y)N+38%gmQ}<#ovqD9&OE0+(DfB( z=Tz@un+{~7H?Z-r6K6Ip?}jMu?iHXE;rPXr8Yq@wkkd9U!+$$8I*4X3PBPBza~bm) zo=ET;lhs*uWf74xT26}$vTIpYL^w~=1S)INKQEaQ=JeZ9-FCpE7Z0pmpKREe4cDG} zd5(JGiGhsz#vc6#jGT^^<`1gB_?&Vtg;m-_ZJ~YNIwkMI_$EJl8!t1@QaPpGeSfF&gPF=Oh^sQPNnSw5R|6ifo^a=D3#iJZdE5;B`#KMX$4T1TTY zvirUAztk+d&)ErTZFU)DNu_s*%J(&;5@YtOu)#9+-&)S{mwxa-1d=a3eSLH>`0txH zZ!*Vhex=H=bw<2=+MB9dGwDbUbV!#Sj(*J}X=(Jp+xi2H%8E?P z-sY$4{Zk?{hBh@Vi9=?nu!nd2Dl2cx{v6H7D59=4Gi0++qb?Nd-@(AUmo=kLnfmc# zLsJvFs;X+K^A3w)XN(`j&Ot7%lLIx6+<29XI;m{(yPg+Kw%&hC&~A>jk5JZ%vGc~1 z*e8V>gv7)jGBc&+X6EPVp&at_^J8A!f0%OV`1`;`j>z^U*($xh6onhAG@6A^dl@r~ z=#&){2ALMWA3yi*;|w)TUsUi7UU(CgH?g`JtX}d=HMnQ$N9KILZAa{zR|guNv!q$U zFsN)+iVB;fTNW8gW4n(-${wrnax}`{tZ=5} z!1c7K{)OR*alRgzybz(Ih=TLtBmM(9&FSo>@+@;QZ4EC4iJ0$@54~qeyF&n}TeR9` z75&p$(jOusNEH+ntvDW;35$t&_tm|Pioz}orEJU$cvHqktJ!bYH!#pJG!z;3j$@}+ zZKH3w9aj6(VtMh*jlC@uJDjB8KX+7Kk*ZPYfZugzKXZ0ihi#%iOPwd{`l7O(%3e-Q zcnmLBL}8EjNX{k=@+v}x{n~Ya?`qc;`T-8Gsr@7!u&q&jJtgC4Ae;rNV$@m(Ead}lj zl0Ut|w6)Ij9J^^hQ{~=LhQr?CM|S6Jv(akTkyP&45MOea(o|Amns*c0y_@SjQF?@M z4ws|(658G0iu4VjuWwOVK;6G$sGrEJsTU`j+;(J})(3^rQ~)x9pH6~z_7>=OcXutV zEwZRu-df4L+PX>6fd*&wM9z&|ri8n1H{|2W0(j?Urwz1&np8^h2KFTG|K9P*lzrd0 z4UinE3F21nBF3~y;0Uz3NH~z7}DPE&i}@Csc6N5iAqbUTxr>F_cCZd92Ba7SmHCeppB6^4s3$R- z)SBA-n7rAAa&8OAq!t^BW2s)o6~-IA+(_A{$!!3+cf=jn^4aq0YU(PdEfFO9FllYc zHOZ`*=M%5$41~n{k>dS*iBJ|@;qv6902$`X`iT^tA}9}77~3f~+1c^uJ7WtpmTd)Y zuh*Xal$PgKs3>8ag;nV$_UfzD)_YT^D(;W*f65?wPN1Urw9#J-y_=X@XVY0NW9|%O z5wxzmosZOu&0Yos;K<9%N4aV;h7DDw#_-!r0TZT(4nxpP zpenJpw=k#D{JI;5tHi`~w=?#=cRTe}{KZSuntenR6ag>Ko`XE{tauW>u&{7PRDE_g zthEo>&FxrapQ}?|!7)8iLevo@!rlx~7|pYKgLI&FOYQA@u5pW(u=ZZx`4*Z4;#j7Z zk&)4KO1M^i5Ct!r&0M=7#isqMyo7<}jY0hoS{@!^#xN|nLIl^-H!`OFbvme+mNLml z1L`KNQM{!>L?XVgS@wJ1#l!?YN)p$dsD0@$9mFfAt=+YEcx!(&EHb+}dUKQAMuer< zg2g*-I;_%Gfa*Q7x{qRp6798XzB_z*J-;V|l-q<5#$!2Ad)jO$Uo2O6(KioHz+CIu z2T(CuKVvE^R@gVmzfe*9zFs*_26blf5|hTl-j6m`WT42E*LQX-dUEaG7tam!c)p9^ zqfN+}*p=_l-oL3{b~DM!a32_le!C?LgwJQ3t5h!`NbtZ#4o zWMte-eHb4c6Z2kz!AA4(mtI?y9}n&r?#}5QrqdA;N#>*u-p~^9vQ-^0U?W{e=9Z4` zOi@u0jJo+_yjv^G*XC$%cen9qnx5$+Z3`5ts0s7%A;ZUV+4ws_Q0aK;l2-1FIbXYe zeNs^A`=Z`s98q&7QBl#_kr4_|`Jg&Rl0Y9^GLOUk9UP8pRP4m|--o^XGL)z5&e5#! z=ub)-GgOZ%Vbt{SKVf>!QYV6Jk~M*Qcxb$~3=*^R^9@jz!*0K)sY#`jrRH5S=7fXW zYs~a>vG*Kg@^@he2P{JY355e496%VJr=fE3ijR+ut|ya1cv|>(FX` z>1lc%ON;42QT`@rX?dAB17%`rx^c9>raxKltrH=xU)R@1#2D7HWM^!AjhI>O$uCtn zzaX1@KhUCbSulMH zCv%c3q3JR}=5e_+@g{#ORGpy7kqSC-xwyEnJ^hkwh^qI+r)L^>KDLvS!_&~zqz!M2 zex#;`?L({o(l(T(dNDm)v%+4t$)5-!RNX1a<`fk3MktG5QYA!g=56-Mx7pqEB&)U_ zrhF&Ej8~L5v9=Zh!_i-#s9XQ>Lu75NYV!N{ps6W6VGJ1EnJkqFt%22V6^=B|30c1| zh@J%d-glHl)YKPPSy^Z1<~(#sDFtjlMdn=&Z(~LV23hxe7EO~f9`c~i?d^qT6Oyq1 z=rpJLi7s8zYdMG8TdF4vvCyTd{v*ZF*k(fd7cW2h0)Fkh%c3j8DiG=+4Xa1Au>G|f z-kU5UxY%Sk^-ymab;Ws?l<=;OmNisR`;#nAdG_#PYIOqE$i>8h4{OXBO>D2uR0ck7)&EUZJzvR5W|YkaDH z#U9AHG5J7QPmgZKnm=2+W{i2~5SCR^W+v{d3sfRzW=u^1wl8%_xwyD=wwC%V?d-fW zGBONyW^hPYxJ*m?Op0drU}z{%q&D`JbM!|`t=6};#KgtLD{@pv607LTce6P`BDtq* zZK0}4hD06+GrH{&?0i;JXyQTS-oC!R_Ce^N%r1Ss?%?F4SNr1h`sSu-@j(A56h{!g zMh+A(e=o6xbQaIL7x2)hLG&~>Hm?037LW^NZ2#JL&I3@%O#UD?>npy6SaY+_TO7U_ZaQ2zGrr z4UNEXZMUJN8`%Eghl_hq>`cJo%FpK*Ew{sQ-QN~dQc|iwc}O$fv$p1duMMS_fK{Z+ z5jpJg{fKJ#R{CEdM{bpfI=QVpd#&aeq&w>M_4T_@<*Yef)B3*rKvvcVmIV^ac*h)) zz9~xXd>NXLYqu2~iwF-<29bJyP99SCiV!3*G|?CSWcic{6U#Y9l&bGtXz1xOjbNzp zh7PLVJzyZj_HI()vzfz%r!~2|F-2b1w*6Rd2DV64sE7z&LJ6T zM>Oxq|1eT1zH;nz?A*nl63o{=?d{Wh>3s!pJd}ll7!92aXFKiY_3K#HWt32=f3qG3 zF-HO(soTMZ1ZdsSi^C-rG#`?Z9Q``HaY!a+X1o&bz52rUB&|({O$SmEhn2i$wkMzQ zTsE3Wx|g?@1HHi(fv^CNGWw9x!ouRpl`Dn6h7WHQK351&|Y+h~neY2D5 zPuMMOtpYI=R=@ei*4wv)4h{~NZ`~UCQH02upI_60>E289v9UFvy_xD6=pDQ~TxN3>6-*TXs<(oIf)28U9M&&G)bu$=WiB78x>=>Kb1dNK#0LsZ`x zccI>3855DACinX8Dq=7f_LxUO@1#KpVPb;bnofXKew{Z zi(IL)s)~7D35+rqm)npuTJEfBj;$TLEiEl2C}rT&(2UPIbVRTt+UKkcco9?sijN+> z1S_Z>YR2sBY?VAcbjaetk$@u^5%!Scw>gBSc{!)%g3nVfVkGH+Dt9teg1T-nPd_>q zyJy&RhXO}dR+f1cDc@e-iS4K|EFi0RzJ{6(5eoho=Y)Oh`Kp;AQ_QXB7w9E|8xw>* z@$m3oKoQG^>xqs-oB&~YcV6h&@5>i?c%Bm=G1KYSiI>BzR2&}h9&fN4m9L~2?Qb;G z;FFOJeJ8g)FHlL6N4)3re(rn+>*B&cbI|=6mO7hZJE?Ke@Ut?DSlL&w3?P$fY-*YW z5ka&69q2}22{kr0PJm0{K_?(Ue&b#1lIwFWt%rAhJ;|sze17f;lWj;gh}&d2RoiN> zw3pNWDh#@ZD52op0DlF^g!}sX92Qf;nNTA4?_K0O$Ow6r>yK?f=u$g045^jcpu3wD~1eU3*+_@qqs z!GnBKoW#ULl|tjtS?*ZbbC7Sh#R!h_8lBl;UE^k%UN17xxKfLR2j_AL7WUq=kGj@ zM*`y4MWLhJq}lS^+-^N4#Nmab(z>jYOlJSa>pUHG&B(~e_v2+C-OnC#a&ns6ckNKO zmHr&0h@on`W;lpih7iC95wRqgT|m6I+BPo@9R{l}_gTewW}?oMl=oRo3V$v)2rv%I zk1^Wt|F8gAC6KLwh!f4t9^1!YxN?|;Cv<$k8B8tMx~!oFJ}4B(QHLqP{)EDKdMO3` zOW&T4o4-HDs$FfyPVC|7nPeX!mDMaZS? zm7#_*x7O-Q&5kzCFce0PD^jz?BjR;0Hb*q)7+ zzAP^nXpiJP2X+-&1Ka18mY0y|XKR$5fu#i&%Bc05^9{M2#F?=Qy`hwS_?j^F^pI^> z?yl=1f=zKT@qAZ&bE(xdY=Veq?hEw#Fm6B4>WsJZ5?95?6PhcojwNAqElN15Wukr={y?=gv(xk!TlIy8TC1(eQnw zggGYpJ~b#-+} z0mAOEuA_tu)7sh^$uPC%3CM83z4cOfZ4#`Pv=1MhdXdS)6%jMZhpPIRghX@-8byG4=owFbS9iq@#Y; zez6Zy>ft;?xQm2@1fJ--?7g8+o^g>+PEFM>-+`;2JZ<50e*d6sX7%EU7{Ht` z>hn@0@r7CzaUl!)J;CVG*VY#FivNmvjZIZy*T8E9W~9n_r+9$~ z2TDrE+2@#8u9K4azmR456_wJpwK;*%{A5c$`^Ukxjmd9>xZo820*0JGM z@2}oE*o;4hjl*X>gUKixW6a+p@~ONLcgt)_q_rvtoWV5o54^;18h666y4d>>XUgkk zu}6Ks$}XhZ>~>2EE2CuvBfR^QPM7>5ov-%5b4rlA#uUBaixnx2;Vts=^=rHv^2hg* zde-yXwyIzj0FjYI2hWVBoJG4DsmhY_^DhBALVCxA&&Aah$r`33jpFLS8sBKWnPWSG zKcd;gUuIZ^h;#EBTU;!qh$C zP(@j5XvAFMv8dDz$Abdza&m}*4WYUw2%?O{Oe&|Us()EILn;d4^}}DoGNY+=2mGKt zUWf*Y{0KH(kpOHr=l{rWcb*eC~e;kD`*>xBBQ_j$>Q?#j0|?8PRiT+D+PSO z0>CuBj*Sh1nF1jTTNW|@mxdaJodrj#xaQ8r*@pdKY*uEIUmRfM{@9|AaD5R zyvRHqp6EwPN{oXEx!lBF57a%)!S2|FL*C(`l184}p%WS!8qh*IP}VYQ{qIzfB#%~B z2Wyeq`4o9SP#fq31*t&sse^RF59Et=6j-1LFrZQ6M%B~PQwoPr#%4ee%bg+>&!9g7 zWFHdQ;VjzSsW}b`*K)#oczXlQ=ORsTna%tZBwZf8h=uROW7VzIWxvK5+VZ3xBCbF1 zMlSo`ODctM@*El8EEQ0n6f22^g@g}<4!I!3enq0?a2g#Qz4BagR)XY^3cyzjBPFb0 za5+9y(VT_&hWwR9vm7GkxeTerD0}k$Mcc~eStNaY9TQ__$2$Yb6PREvsEn*xkCv7e zNonauSZ}!oZNyMDtfRmSK*Xj=IBc7s_<#?MF1ePJm=)b8iFeAZ1B>gVo`A^pCY=S? zk*@_2UD3AsQUZ)34;W+=9j|_nJ?5$*R?L)U5bCjfGKi-uq2Agitk*v zV5A!lC8ikA^y`dy=w_x)yAW4VCEg#eGk)fFn?LLKf&#n`U@_G@*c;#yCq9h7Q|TV} zZ~^7Pd`?|WjhyG%C?*XJ4K4+bv;yLBLd__qrlwZWaj7Z5UEmTcJN?$&`^%Uc^nH{J zikdQ31>wj;KEhY8lr|)AlY2FF{GoWVSxTt($+K!KW-^?9{GzuV~O?f|!qh z10@#Y#82dspD_Vo#-v?M3Goz+!WSVSA)k;^l#-G%7tTlcVck_hf0BI%KQd?IXILJ1 zyeDXgqN0H|0*f8c7dteKDNMD;hk}~o{^THd)4eG#m}DeqZ`RroXLoR=h<-X(P}GP? zR6?Rbhm8wEkcSvqWp2P7Awdc@KcYG1NKlaB`Y45S78x*&W=Q!KresKjPI`2dUs){Q><@l zhk*NQfgPQeo;xEfqZ6A1EIo~aAZEAY!{^BLp%fe}wW449C;}0Ij)kRjsj38qkRxUM zdkFtO6dNS}l{Ts0{ z@0x?cZE=X&WnDOs>J~91c`;ksU?8$vJ>dZwh41j@Et@)OXP&<;Cjoun49W8H@?c}i zW%R)xUzis-+nEMjkn$o$erV}gr8zu#TP*Kw+pUG3vwvZ4SxfRa-uZ@v%xg+W*izkb zAq9zpih~#mKuD57rrc;_t*M300>D8fgKx3_TZQQ&!wzx?ZR`DoRx+?XfG1>8{Yy85 zbNxX&LM_=gssIpi4)$DjHVQTr9RD6Sm9uTjb~qwQucR-n_Zb=N*2pkO@+sqZ)=3Mh zpPORXHlhQ51k_?9rsPzfIEm<(nDz>a=R#SrWTT?$D31s`7_cINAaDzZG{0%hy=WHi%qC^Oy zc`Z=&-Z=afZZnMx)-B6YFQ>H=n%ErLAka?VivW9-!n90{QtRa{b2l5@C zurLDf*^zQ%Wu)Zc&vGx!Xe!epHD(VFkBRyDS9$u){{Cr?Kk7lCQri5WV26)JdphOwNRg2Ka_rP=rQWFMQGy zBOu2v5IGIcF5^~(|2v5N*9iS(Y1#%w?d|PL7$nrM*j%T;L25=+2u%o(XZKjbryDK` ziJF^dUAAM^uCDB(s{9vmrvA;F7fcz`{>;$Ke@<$M)MidEVsAa40%`KuBhPR!o9veR z?aJOCJ7tmsw6XF{F&NywYd4Hv$PN_s5(wxseeLh3V`2&{cuX55cinVD0&QO?&Q4KT zM&>*v71g6hk8}%;Zf-g)&xsfXqW>KnRP=>wTyF(--D%rr4ZA6A&Hr;FO4OhTZfe6$F`hF1|5T<{^VwtP%~%OZBIxH0Oh(2qD4;S59~Oggh+8Q>i#!2 zEWLt?jLgsNaPPj-f1KJpf_Lrhd7O4uL4~cMA*CQEpIBP*4@oG{|L)@vUDba5QcCYek*<|KKt^=yn;r*c=6#{;@ z%IhW0(34EvgPSRmTPL7RA%{8XS!Jsp0nguq-1*eAfN<^=}Yc&^*?5JEo$7@ zE>dA9!EwwMM0%Q!FF|)hPrY6zau+fIDwdHop zxw;J)va5M5DwskV=mn8=-lYOwE9T=G32`0e*{fW{q;nQFy5Ici*rewJz0+?z1r9=0 z*%@+5^pBr_zEUFCb&iyPbh+~7D!JQ(ivf8o%L7f3CThFC$S)|KoCg#^=fC5+ zmyn!{2KhRY??O4%-g3xIhBIp*-ZsF(&_69y(Kd3xhX%i{P6nD5&k33+<3J)74>B&(A1F%2o&`RxNV=I(IboiGh+_o)#E+zLk0_y z>}-UYHkMYc24hhkJ;vfs{qT8@zD|Qz3W<&Vu*&Nx&d|4ZMXz*%&_S85cHO7DeS382 z1t9@svM_YW4BqsKp*+^X_=M0!fD~EcNl&+JIt)1xP!D940Qqn^{OIfzb*DD%_l08T zF^|&E2%#yf@L22p@n137kztF+W!9nPnC-R}s7B*xEbf86Itix^5U6Iug?^keS!6i4 z4VMqoF9^}(XFtZ>n9`>l9#$!h%4`^je^=D{$~1G0|I2?6GrFKPsMNSsDTabv=^GGm z&&(_{0r{`I{F^@KvBIYWpi0rIY6ARrk;T?^ck&e&hHzq&B=jy?&UaEF32R(jTqPBM zOW$>B`PuJEDNjTbPa@NPcC*2vMuA>TGvuuE4VC4;axRg!N8e(dAu|mK z3NEXEqW9Vwpetd)|0AsE@n&6&l2VWP}d}3)Aytb{V(|k1r z7@?Orw<+SET|3>t=Id7(a5H>)<6AX0n!6b234;_OEstDgwbaRRWMYnrFkaQ<%%r3u zf*53VF|N2CYYtfW*@51$U$~ZY+;=C>)h)gGSI|_876mWnQ~K0eVyfVc8#gj9q;9|Q zRInSm2iq|@AP_y<(N5_OWT3=Rf!-fHFb=E>vFo&zFF(=to^@INyUm26)*N?asCRW4&}+D?Fbc0}o`_ z<(|G8;7*d^mf)eEDDzx{k|c}yw_wHE#v-3%$|ZzlNH$=*yHvm-N|_^WSRPmOCmR58 zD7I_|Qi#G|uBZbmlB>bWQpKsSS-yys?>0XR^7iq;K$xq+d;^>{;R&Z)MFoXg5CQTP zz$+O;fRsy@E{SGIeL@fySO~ldicuh{H761gaZNgmN#Mt;nQW8BVAu2V;xZ@hqq>({>JL~y5s2}A+?K(~MXQ0cVaJR&~s$WqP zgcs)E+iSo_L5xJFKro0xlt}L>sHHVuVUUg^Fif{Cu{od;fG~K0sbCS?@lU6ZdyeipZ3;%|oLTm5b0 zWp4FGshk0Qu*{(2rbuTRSvbQgcsDdCAl6JE>J&m^QB$g8!z7Rt^C#;?`M5hJD?j3}k0Rg=Zbs}yHzX)4!(@!idB?X`ea(2H@ z@TKfaFjKV@7L});KYt!bBZTzUz3KkTTg4P?^c!EC zlk~}zk!}&B2MP?rg98@;vOW|RzTMi#8B#&2dhtNgm#}5>`x}fZPuwdsKEKQ?73f;J z3*snP%U6Dn1k^}&o!V3I@hOmBfn*Yf?!JZpKJ|*q(n?%fLiwapAyqF++*N~?_Dt?C z8SF)c8((^3m+R1MJ?7oL|3kZsvA+jDUt6)t4b5JqXJ9~wQ%>C6oEgw3sL6dHOVI-n>Qhb*N!EY)QajdA z_oJ5sAxzKeI^INo=(poOzQGgYL=%O59$Z{e1F=cZ$IH5gM_ON4#Wf)U=xvLc?S4O- z`OAR&!j;umW1mP4`JQ+R{pMu|k%GK4UWnC16I$XH z=@6Ma5M=JfB`tF4^Pem}mArl&>X~I!Tx-nXuSNn#ZtLxUt*ZmNii6mQjOX~y@k5BR zmI3wH(Jb?f(wvCJSNh%h63hx~ji2R%Iw8L;Qe(Jz*#-aLU>~iV`NJ{wdna^&8sUZj zu&TEO1=&Fb0_iCUIs?G(ZiK??EOcL)jTE0}4D&-J2H8SK$JiegyS1wR9(MV5`u62` z&vTYbLuL(YWFPUPe(qS!H}#3BkZfenpc1)P9-X*dXU_9{>BG_lSwZstef+QZ>@uJ- z3TG(+m#wwF@x_>HVZ25N5|qT=MMMuoeA);;E4tRUwnqvIUO>c5y`phTuo}eD1o8KK zHETE^V>|T7EL|Kg+c_F-VBC2mgI}B-_`%jIy=GpNWXlX%>bAl<0@2Nbh^2xnF_Kgd zZb}a~Q2$=(-8%G|vEBbSD;N>FFUj}8q{fGt1MdbR|0@`%UUz~p(srSxHLd*uI#QvBO9Gs%1zUlGgUv2Pi$G-j z${(#a;i*I9Az{&Yk&}}%EBF=gr{UrKyuLqlUX=4k=|~TnRrc4!rI(;F}7Dn1v5<9Xz8f6+wNI8Lu_%&pqFIzF}VPzP=aQRGM)- zQj5RI_jc)EDf0w)K_@p$&LAjn417IR1jLisU~b~j07!-GW`k@nR2-x_^sz9&QsW?yM5I*Ixe2xL{pug#}S%5}T#$mTx1W zc#B?NcJ>_w2A%QG93->w;3!-94Gd`|B z)mNsADem?7Iqf6lq(rmpYQx( z0T>v7csNbtvVIz&;tg5}f!T+yd_1Hqg(&fqGXE>mT?qBGO139xYfDSRX6U{eED}$j zUWd9@e-aL=yK-`J1@W^$OMUtBg%~9Q+9~u>jqNP^{*~U-o@8^`wS=9{|$|U@NQ1dUWW=%2sV(BcV>iiPVEaIrRO|d4HIjaCq%BfN> z|HDRSj)neV%MP9!cji#@<;L6paVOC-cGurM06J>jZ7mDzHJ^xx2qimyKEA^8$2p{r zGWwv={%6t5 zb9C?vHa>8}4e-z~gTy@{;R8V=2x)L&vJ7?R!h+Gj#uh29Qe;AetX$~lpcHbW1OUn@W3Bm*>^4ES6V+jeOLK=393z8w zHN%|5F)=YJRqo0*Il!Y9blt&8>hT4oiVD`oOjVp*7s|axOps#BOuiTLYor?LNG%5l z5rOWYX^ozTM@bHdDBA1S)B5&Tdy>vwpb|iXYy~)lA6h!)51{XCZ)Yt8?9>)i+t^(A zAV@WTyjPwRJ{)d`6j*Hzgbou=dIYS?*jYKi3jovjjRiuKuORmLGEO&|)$q zDj^Lv5A;HKd3ni&USe~Z3o0<`s)t5IYuBkpEZA*u=nnk>BJo64tAs-QXm_x)Qhonp zz(C0p5)$f6HTogPm6q$4VjD|66d-)Adxe)h=~C;&Q6kg-57VCeR=&Kit@7BlYuAje zG_|yXVLXP~A-=w~JxLO($1$CMHm}HndFCv;`m9!3Kj8^nfj0sb^k4V;hyn+SxhAmW z(0p{)0biU3sqh*zbCVQn)z>LX#Y8kQY0oTrlnCgJupt~DDri7^Fmv=A1RYSsUhX(A z-GF=pTAlBys6;%O?i)S;hY4v0aFs0*hx#!CcK8(w@a)bZOB>2acA)OS%z3Fx{#+^^ zz$qvk(IEfH7}!}&b%Qq8KuZ2g0KAHT*95yN^C+gcIy{3;4B^*IEW#oq5gNzkV51p< zuHxK}9Kl#bkb0y+X=BWJEw9zaJXWs3po?)kitcaso3YV|j^&5X;0f5lLmZ{Vga9Co zKqGf|cfUAK!E-l79*gIi9=RE`Cm41_d57HD^WAyUM1&x-FcP4Iz!x5wLQqm5iI6vP zoM3^Bj2OUCNj!M)AYgy2z~~}Sy}#!GT)7+XN}aZDfHg&X4KVFs5Z5)zZPTP2>EW#| zKtUqN5ZL9pCVe+5xBAs}B2YdR-~@whe-5aHEG=H{ng1yn$PoINwKkhB2^Nn_DH|~u z0f|Z(kQjkUidCj@0q`#n(0{HB5zNlcexEB_J%J}4sa~5&xAdsyLL@dP8h#eXW2JTPEpZ&eccl5F?uj%eB&9m(=A)%hka$n~$@@-@Z{fIyxc` zjElI@Ul0KvPB4Oht=l*3#Lvbm{h9(ukd_-rZ4r7L&I-hpf@O-sc(Q!K3rSCZ{rVJDu~$my3xFl&>-MdgE5y#QjgA$nHCV=iAhuSQ6eBVK^ko} z+e!o%aDhHpXkRGWTN~cf%0?K@`i~XBUeA;P^Y=D9d?eY3fOC5gmOn~pn~?R7aOG9pAAxRK-#4ZrulAjS3J3FovEB^e(zWh(qAmC>gMP5%-6HjIGu zIgi~M@e}2_&oqs z>5|3>*kOZkP0FTo>fqqO65iU7F+R}0W38ABZ_v3@%tH)&F#sOmg<1ZqSFb9qSpald zwROtnry1}78zZcJCr-793u8ISb-`sAAD}xx0|2*>&mrvl8)3+9@Rac_hYW7Gmk5mT zGL114jxv{D8~_=jHO;n#XN_g3W%+;s13V6@T+-3m8R^uoY+lhCz5%a_QHDs5M@`-7 zyfKrHd6AM&POjrp`1I@FATK7Z#L!d{o_yAIc-zlla6@J$Q+o_Q0pz(}@UkUnm$F*! zXO?ZAUeq?V+}(e$G$eq}N_&UkTfp16EdeBZ#f!}Y)+Z3GH3*}h`b>oX#VefWpk`KVtX;dgTeP^caic$;QIOtc7NO^q#^IJ<1=y^AFmYPoQJ~ zJLBIA-Qg$aKnEXJq%?BU+OLjc!AqC+_MCu0)}8qr8WSwR5`+%R4i5o|O#H)tFDbx59?nRmI* z;ajQIS%l>BIZxqWI$BD{#)b!ucDFH?hw-pE`-NX89`@OB{v~L@0jC*|X1GbgQ}TyVS~;tZ`MfC$Jx_TKqd1b@opOLW~`D~DSX?BI^h zLK5=tR2%e)`oifOu!@k@risZ(M8RZI%}0Z*kcdd?J=04-ZeiOqRb1WtRybnvXVR|E zUvo~suD5o2Fk1zAWevnXczc2#XO#vy&NeYnM+SciEVFc}6ⅆG8`Zu9v?x4jfsuz z0a_FEI^4VgT)00Jvx73dvIvpm6#OBIj=uyyeUT zk-$v+*B4AI2#AS&0J}NcVtQyF5QS7x+T&ssfuh= z75zG(&z1l=VBq3{OhF{Se2`HP^3#=-6+`WPAWO3t9cix!I`b0$jTGe@j?&yqTu`fa zam={o05O4{mR8sj>XhPg91BQHU?b2ErF#6{oroiCBNNGC;GZ&gOF)2U867exzWu|G zDN8DcV(~JSg9~8u)YFID_COllA<<ifAj6*pNr)%*URwB)E{B~)xI(;Nayqh~GxKs?_w5nDvhtXtOoSyIVGT~KN82E8 zgfhtX&dNrbf;l+yn@oWbe~@x%ad8pIbDxA#w?hGV6Tir(~#+?$1 z^n`$PGjZ@d{(X7_yc^)P;F^h&TyhcG)W=T&tO+gQi8R&ZrFJys7 z;N>ew{;!w9?2M6v^ZpavIt)0i<{bJ zEur1-qiN*3`pdKTk!Cr(OPA{Jhh!bPZ+8l^q?;TbA2ziSXa!qcKYg=~gYB1qS5w`C z+ge{Zn%dGBaab8l9+1Chyzlrk!6*C;OX^jQ%{My!saI@H8=W%Jk&`3bNcO$VVND^% za+Y&{YwzG_y?N#{u9?n7=QZx-kR2LljON40dDX7XOrw6SWy1g&imG2GWQ^Wg_ac(f zhBJLw7U}F{MS+OJEY9mTi~zU}u%(9aaT-YJKj=YBL`Z6Q*A{S&J>|yw!VcZ2dTq=@ zN$6Mg0w@3D=DlhgTyK#{40(ORj_W&?U;Vw`2u0)HS#`?EQNg1NHfGW&vqpdXQ5FF( zr@NiU@zlKqE6n0w^r)V{I~C*mL^GBa9Mw8Y3*IqE6cES}-nm9X1ef0hGk~dL{Y_>7 z53$#)q-~Y;pFauz4`puxkLB8S5AP-oDl|}rLdh&Dw<$y^R6;_8P!TeQxRWweLK;LF zGZd03nWxB53CTQ1A#;+UOy4@y-p_vD|NH*G?|XjF^ZeTFa^Kf=o!2p}W36@M32}7! zz~5#k-WnD~Up0*eY1TS2QQ&fAuKp;`LVHS-5yRFSiz?6M-TkI?aoj}L{swpW3*5TJepm4u@CaJ2^B&m?B|_%4+D%;B^$O-4mQ!6{=C!siJPX!r3ru;Sv`0UseJ5Knbp2hth(h!h z#)de)&}DfZy$co?{k3t${YET5$gB>M(v3t^efTi#9_BS+ zm%l5`p!;)M?OYiajSKF#jTXuu`}2%7v@Q;zf!kRyvkL}{1ai7OJKhi?ASYJ)=nlPs zyC0`jm%GG9#hXcm6}JNPD|la~u&>oiXQqXs_%-yKT#9<1aDnRLxaNcaY_n9R#q0t`xx>_P^_=XA!YxuDOi^bu`ojD1g`<=BUQ65L;b?#Sdl+R^wSW=(eJ=zT`JjrP^>y za3G#Rv|ur9N7gm`(q`=7NTN3VIt`|uR@XVT$!En&HmntT1tP+v!vAj;^IAyDY#L0+vSfQ#v}59kGW5vOQ?(x-VzL zu2t>$@z*&4Vf`P$^Wxb6BF`Zko0P}m5Y>Zr3DnWqKN_6CZyY#W6}&{hfOAN?CctS$ zMe>T<*MSJ5q#;pq((Eq|dHbe%`>~#*uqP-pvn&&y)LeBmXir?tysKHGy^l-c()nD! zhS$o1Bf%A`87uRznQQrK&I|2#U`mY%_?#A~oH97O%Ky~)9t|x>b;)D^4PQo1FY1~| zzym;582s}ZzbsZ0V}y5|FJ>V+iGEw8Zz07RVVoM!kpHWnAFanh;e&n3*06#=cT@t# z5_AT?#2az% z{LC1NHur)8S;~dx;sHPTmo$&FJ^o_C_8 zRfhN0#h1$0C1~bKW^d@Nq7|X8c!7Sh>xC6#NyKR7?PYtG4ed_C588sT_uJ}Zq*!eA7;}jI<3;^4q;4}t= z5J|UI-m~9UMh|4z{g#$OBRbB{4!_6i;VHj1x|GMH>VdpRzpap-m{mLJS-|7xc%Uqp zWLK@-7^r;%@2JSAr@1CrRo{gI3S4V!FYE~tp~NoDShJ(@B8Wi*T1R3_`!y;K%o(;_ zd>BlfU--iA?qB0#!iu04S%iEKpaN$D3JHQuLtcgU8txJ6ebgHJ!NMa?h3Fo_!~LL7 zuz9hFz5`*b(Y~a(m>pWv@&G{)=>~3AcPmm|5Nq8o<;KQ9p!D~nv7I=@d!YCkze@TR zyGaG@#()&h6?(VRwRDX;Cx%+^!xf+^+jKp+RGy`#%pk)|U{9-Pp=yI!mdyQ{6@C7@ zDzya2)BqDw!guH%M-m=vPD9Fd=2wyyze%RVY32>^by`hOJDdVyya6+r#bTDNS5Ylm zcH|3gib}47StZ1$tFC8d6blIpf7tb~n3)w*Z2JfP{-4m_Od%(#>HKQ2Gd5~ac$Sx0 z%XMxcnJz~%P3_+BtlZ}E#WS1vth6Fio-p_d`kGpHPdsvoC^|uUWn$?B^x`$F7pX7H z+y*np^Qm+c#%AH*&9M(0QEW)6ydAN97N3x!di=Pt6KjzLg}5%pK7StV>)EcXPPaA^ zf0c|68}q1QcsHQ2#VA~afahSoM;-EG^vA={$-c;o!P;LSjKdxz!l2;FLs{4SSa)~T zi0oJ)j(se&8&)YiN0bi{j8WCQUD#+=T;xuB`rKeRJ?BBaJj0}E7FvWB80G9k4Z2^8 z*nsX2U75oF|LW}ku1}>678synE)fVVDXNUgRQwPHT_n_vGHPq_O9fP zpUQDqgGL8LJUjF%Fo^6NWNBp7S`$_6u={3tX%WuCO-yJpd}QvpGA&51Ks<(j;nWj+ z_<6v!0tlDk61f$ge;hnf$<_AXzbKL3K+|MvaK$;IjUbch3)b{}B*83|{0NQyvN(n-f^cbi#*P08=e6trU+RinUX%{?woTE9B z`&ih5Z-wnq7FyQN@7)z+|ITb+(m>&lAvXrsJBbf7ni;QKPGddfiZCYt?*B=;jMO|F zA_wmV9gj_H@BW@po_T4^tvmZk+Oo09s{O|027Y4RYD{qxk)(`Q6^}|?d9neMP9ko4 z`g9^V>E=oNOQTIRL>~;g%py1s5Z16+0fWdue_~#9SEPPY86uIeP1gb9-W6#?-X{<= zN3uNSBgEH!G};g+p|Cpp-N3tK9^QK^^q4I5UwzzvSXEz(=6;jMw%)bd^nX72YA>?d zU3WYqSt*6V`#z)5>|58UB2_t$#L9&f{ujcUiQOtaq7zeA=2T(wn)o$4*)fXKPi#$& z9z9CDzisX86q4e(Cw6UGjcZSyVa_zI=4^Lu8>mdWhQyBC5yj8QvtjY?+u@NIU)OqT z=iC(Q$W~KV<{)kR&`fLA^0kKy`y#lee${HlUWnb8C$!u6;QNtq&S^779Ua|ox`iAT zcS^kUnOH)=sMw2lzqaXSJ)*uRW?bcIn(=Ab!-+!Z*n4_<^y@xu3&#~Ve9gj&0t2-m%OcCI`@g6vF6zO{fYS zX;BbFMn+!x_xr{%z?a0o|NUrPY_8thlg8KTEpE$=_wrhlH@c0a=D#lEtwyHV_)E%} zb0&E=xkab`+@kK-Qh7`gAkTrs0OEFDo&{gX2Nlzd*?C|xkSuOr%eV4MW6fwclsk|a zIESr1H znft}f1wI5-h_DuXlj<1>_s$)V+_Q{@~VL#_#kpzj~C)h(D)Yjfa0yM%K=gbGS&qQka;>Ep5YQ_yX(a1-bI(DG_ zhw)-=@8(sWMQcbUQO*{rm9q^V9Ck`*E-P7YJwQmQGXgf)E8~$K|m#YFEC-jy?zopt=9H7zOg{GrM3U zo$ybAOfqM_{p_7_X~r$5u6izKV*lPSDdK3bl>Fm-TXyRCA7Jo$iaEOFsFN>si0m$-JEo zN{jJ1P$gQXx{hnT4X>E8G+%RM z2aV{7gtm`=u9m%clY-fxeY8+Y!(T7Yt!I3BZrkDi{AhkDDHa&no;`aOtsCP8BsQWr zhDq85EiG7lQLNhEQ*Ap5G|IkbkH7Z9Cmq(R{&_BUi{`B~eyfPIIv-S@h7?E4r=70L zM_9XmKyXcIsLn3dU-BX7sQ8B<-@Ryf7A-`}*u>o?mHVQqKf%)cUyc5-i!AttjTl8j zRE|ll(=lObE)<|(gp<%(uU|>Ych+riEr=_5S`{zM`-2(TNIU0y`@KU>X40$1g0r9h z={V(hL~hkKw&?!PpDrX)L%B)(UZIwOO51zE3P2vTCAf!yTb8}HEbyUC>1bU`cKe#0 zhaN^3%cC^y@nvLfw)*W@a#UzPAxRo@&k6?s>kGFceH zdBC*dpgDzOTXAz~^*9b#z43`XsGt zgEXBCQT^x7?uh>FBXKc6w4oYe=jHX%rZ%w{fTfaQIcuN(9V$ZfwB^+2rfA8FhR+?B z_hz|p=4nUC^+vvz=|MJq@^%?r9Dj}`z3~R!Y^uQLSqTNxivh{u%q-=yfv z0-8U;Bi!yww!i^^_~3N)*TrYr^{$;8PjV#?8}KPqMB!I{@xorLScmus%RtiK?!HkA z=GlwY<2Hb&rKqTAI(Y?I1^gOJ>a0;p%E5z<$S>jKk(M(84a>HLR|!{v;EW3)+f;;v zN`pkrtzk|}#9Ng=$9g&LzrAz+{*BNq$=KY~xd3I2f))Hej) z77@8SdA061iIe0Xxw)4kuuuX&rVZ_Btvxe+Q(ERcnD;6%saY&9Fn&W1l`_$9n)Mj0 zH>l(wK3fKdGDa}k+ol=STR%x|`Th^Qg!(sDUt={W~ti`mY_^#AAQ)41E!;TwDoPi*wA&E#aBkmzKm$BmVsgyDzyJd?x3Sm1oY!maj4#gV?7lQT zP8FaQM79(bJ{sgY=dnR7^Y)F)|0H*HyIX~yPKjP^oW0Ww(!F6~?+V$$)zzYmsB4f8 zM+|bMeGVGmD1YP;Ie^Lf3TW)sAKQDaL7%#YnC{}d5=fXhfTCU|R1b4KxcXS-j?xhI z6*{!`^(Kx=M~{{OCW3N#HFyPuOK)U1Yd-g?H*Rhm&`c_rbbKCU?r@m^#|f zDYT(D4V9WpZnn{dR_I?$O7r3RCTbt4A((!}NB?%nFMChK#Eh7rdhr*ONN z7!x$Ks^~tObF~sQyD`|`CWCovZvaJ%A zWxMJ52E`Tgz4n)LvS?V0;*&YjS9x_boNOQ9QMzlk^LOhx7PdF*ND)F(G2`KX-^W#P zqWiRFzL6vkZVS|Di$G~5<4ET`{X18_T1>2){sX?^Dxf65dku%sjR-W0_i2*1j$L@Dg`TV{HeDE+n9|cm^ z38O1QX^>Ql;(j02JZE#m_{Q+*UsD6Byu+O5ej2b%Ol$4A=pU_^riE<&p=Gw#`c?}Hayzh753+QpEZ_yerF~(Oj_@E zy2@QHPQ8dNG+MWw0J|U+8FB0ZxMVUp_31O6tc!uSmVtnRn&EET(l#@JJ7zmUK?(_B zg=N4iG^%4g6|W%%IZ%@8H1=s=z#E2E<->2I8HfHHk?mzXChvHSk`^^ib&|f6k+C!< zAaN=pwdwHtJ5Xx>?tM@VOhiWVX9I}ZzHTLgN#*&+uE{CFou1|a$2ra&6D%u~rU`cC z|G{QXHzf8cCqdLfN!BT&e8S9oD_%RoTg6Qs?egAv>z2~}9fmbekE$Ghd7Nj%=zeFP zNC^e;A1~8?_Qxj)!|l3!98jw;5K>wgF+|pKX@uC=X{i4Wx%)yZBC-|NIHz9(3bP(j z7fn6V)ThC@EfxYEO3K=^2_Noj0RG-xYH&lxDTA$ZKG$-L;ZEhn&8sIXoh+yA&jX>% zg`7UrAP|omGRi|*KwCGc?XxA{LmS^i0+vLei(a@gfuxxNn!Z~9I=+`F`)DGq1RALr zR$u%9{XB#62dSS_>7scjwp4xI*K^_hgL8VX^+2$;ba#T$9BON91p}T-?4zI;wu>C7 z&?*<;-_U*~FC@0KNH(0m5K(Yw)AT8?wx~T)A5ZA$+`_{l)J_>8XE)7wm~mac294*9 zp%hq|dBHtb_x)+is!rWF)qQLx`^~36VgO2Qg z!|wcJUr+toe-Bp{Em}lz+_#Y*F7c?lxHOr9A5TI~x=mbs6X0J>ITNf9k(QAowXoKl z&6>?GaxzcV`f%CtC!1(Z_qZwB;7di86==1|ANGE9|Fq?{DcV6EG1%=|Pp! znnz^<`;Lef;LF6>Tq=(t8$t2`cgI)FqT3|YbGc^kS_y_YQk)i27$J232Ia!o+*w=C z1DtZ$H;|IuxHPXN!|FBOBH5X5?%krGD1s=dp{Y5+V=YPv8m;P8wjRB_8{_b!_Wb(P zxY`%H3RO*t(%009Uzu8K>7TYQOsDFk@ceMj2$6~t>vrV=z_;H@*&dg_uw)jMx_6NmVP0)|AGy{lnX^tBe_6d;n;e+H;lR#1EcF2d}&8Q zK$jM=Y!%NPtCU)?dbNdPg@TXmM92&5e1ZARYD6GXGz#hG-h|!ilAXEV79-~-)zMlE zm1qWH#Q`|!KFDL3wVkewRRfWZTP0MI80C7Y2X11a{nyM9wjIR1KKIAR!xZ;yZM<=t zWUuT6XHw~Cf6go#AE|d{v@0bD$0o0ja7Ci z_VvfCjlz^*YBX?#iA<+%MU*PY=Q-2E{V6ee5exV*44aRUVBl|AQ?qFt26A1#V(rPN z3V^y1l{%WLWx%MB6k$9}AlUWXDobC3p7vv;V=KAGD2H40>=>d#Bw`4Vi_Jhhe0(o{ zSs>cO)54-7Ka}Z$QGAp0;s4wl8l1f5)$3t#hi8gfX&b4T2mu$hD@<0e>L+pQXlZ2^ zBVN7+$126HR|Nx&s3%WmZ6}9M?-H3BZP7Wh)s+q5uIwGxgQ;(MtKQu1&<$19{@`(s zzhaM)y<8v`_#Hj!yMNg4s4=ELB>7TY)athB$;;k@(1{=$TC>T|o~;5Fn|i9Zw|6po z>-SJ&GFknx=O7ulU;`5nKw^Vz>?eKw>C+uxzvyTRLGp)RV~PRyGNR!C$ts|6?o-+} zyC=K9_!IO3<8X@XJeD{WqephCMimw2EZ zk*FG%LLYMNER+5{dwZ^j2H-Ia4-XRybIixY>5O*NNZ)45CiByj*>dKY?;Vo4^O_QK zj&ZXerGuiUs_RY~cSgM_&^&i!iyj}dUUYLg!{5Y(%$sWS5Ts!SL2jggcJf~s3qjn6 zqvv*jGbIu?0V2~)61LIZ9kQ2>8e3IeBqo2bbx8l>7<#E&UTAG9Bqe3_%MKzc77s zvlQ60`b&kEVnZDRem&Sxuocf9)eNB$W9qG-0G>WL&C9g3v{=QhubS%Vt?A*{eEuo7 zMNhZpR+VhM@yu8QfdT^Z46bd>Pb?{Nv}7N;ByDD{ld?m{Z*`MiyX0BH#S$hFGxQ!{5tZUDqdx-|8Kersv@APwbAFVf#5PS^dxh5lBd3u< zb7m^_DR^jlq>uX9L`+o(QG=woN{r@X(& z7hSklNN6oK0(1&kKdM;WQ^9wrHHh!4Rr=$|+-08+>Fqa;+MFhuAfBAFwrp*i-0}OH zr(K`D-Z>e%N$&mzSptKfny~fw8-frrszuX6Omslt(%Eu17o|G5an=)qC-ItDv}Q7Z z!+!eVgs;c)q}0^ZlhW^ceNqB_6Y)?0vo0a4ta2S-paZ<8GkkuAn>%>=d&J>babx3a z|BCLgHTK!aui3aEuG$o(`658CJiB)7f<)J%-R{Vd)!;HI!z+e`)_2W0pEZ1P^>H-* z`l3eVzsxRA>3i07)M{jOeUMqAGN)(w=B{t3K z3bD|_x}St)^nZd$z@R#jUCTh+;54JIWLQ8JZg_7xO9>XiiaB(S@B7Cw(jXi~5Z-y< zgm@F;nyZGARszXwmmhjJQqgP^t5!JhkkJR)`DJX>rhXmhP{OFg5(F>-!-B{duP$2h z?fvem$8m8=F9{)o!uT&{3VQy!p4;g$$HK3}EkQwH85r)%6flwjV2tr|OIrrqAHhmY z$)2*r{LFn;wytwr^D$a zgzA?(KjJtVnGr}IvC!RvBxJ#Tk@$l^&jLs7t7LeIt~9ctM0het8U}*vVQ1Hg;)px^ z@;X=)k{S8YW1jR6g+%`AS8r#(SKbYlNbd5#sGwywUwm5Wwj?e)gySLY#+1J17x~S@ zB0*afY#n`iW_>-8;>jMbDR61x@-BV&4^9dLPVf=YC#Hm~L$9?O0rz1=x@#-Fcj9eK z>4~qTR}E&Q#ZOTd++Aq#Bh3X?xX_Q}TZ|fR1*RV01yeaji}I}#5P(@P1rkqik~S>Ly$Mpjzx z{1?;5-UZGim+(Iu42SjW_Svnf;{s{Gmi&+ddl-QZdw^ZRwDrmq2QfZ*nV!C?p2xzz zuD13Q5w*c9@+xp*n=5{J2V>*1C#Aawf|6x=7~83-tcQCw*+-`(YwObI*M{2AtLYWF z$CnaCxOaWMCZS8i(hLu18R?+OP!tuzqeotViQY#14f-Ovy;MUvO5hh9s$BDR${?@A z3O(~?C71+*@3IIE8WX9RfeVT;{)S`Oe8FXNc>q}LOo9)@cxzDA^jiCzt;b5!dkyVu zZ4V@P(*ma>U^5}C5npWZ5n15{zc6`-$Psyl%tD|QG{%IBi>`(plo;5Z@bj13zC5FQ z*(^thk53-c1DWZ;-DH^=VMzfbAZt<$UtjNpkiUPtaT*>$T@YY>mOiwK7c)Xa)FEt} zeLs9jQr`;`VenSc;BI-~&cVK0sgEko5qCQ9lLB^!W_4vO$q+p1;aF6DmzvE`dTux0 zJKf|yZ)(N$hBE)IfP7CoJ$ZM+X-K~vJcBlda1Y=iQQhCq2RNE2V-koh(TA90TaSdx zgc6)|mAUgrZODNOo;)JNHL_`C@#~B2+9Y=1j=&%v4vl~?PVZqRx0|p$p8F~H@J%qU zrUCjk8n*4{J6>ExH;-O=k2CZ->+(PvO$M}@3soT@_@bs-utLus<-Z_s$q81+;gi=s zuP~|kHznn5pLBbN_QTz&tk)$64sFeER`nHDTDh*vT)cs652z|1&&H>GXl}lR@f*=f zMAnroL&uD+EB4v5Nb;f=1%>Tl47=2|vV0s9Fp#5O35SX?qU<)}ePwKHoC5Q@@{YBe zcSX0QP;cMP!(T=VlG{zsf#I@uf7i2=eO;%l&>y1w#F}O~W8-ZYGZKj|ii}n2ztR20 z_7rHNNSgw=4*;!F$cDu8%5bFUQ%_k%uvh&`xgnKtbdzj9bM*0dzrQ&q#w+9+u#-&f z#0juJ?*sbsPMj?>P@nFcKGH^y@qEe;)U(|YaI^90Ba|&13JryJJ+M|b^H_%dEvVbs!RoM zWZeVZAomAlGKF2yo{cu;|d$9(Vn#%Yhm7X%tF4VTu`98W%I7=QSQ zItN(ItL?0k$d#apmfT-R~=i%t?HG@Fz{VJ!WKM z6BTkUc6qVnn=6J4uz~4s(XS^8j}(X3^?iChz3h1$CW z>(Jh|yrsukd7K)$*J&MDPWIq9g47>IN9UkSaL{}0l&?E5O#-B_vi)+}>ZIF33V=dT zlDW?ukdDdrShX@cK;WbsZqE)Vtyh#+ztRk{rMa z8oZcLTnX}LQY;!@c|To9Ysg4{c)!}9*$OCvaxxAPpdnnuhGZOne(xr5V9cc1E)j90 z1X8K%ugtn0XV}1yBkxzPFckRd!(;AKWZ#Pdaw1wR1%Dy+AqD$tLKj;HQ2H6b-xFFc zcGCH3R%I~-Nk!edB}45@@rmupOmPdV7|7CwaoJYSgaM^5sK|W6UM7csa+@g@C0Inx)?! z+M|DBkt2me&MgsUCn(D}`1!qg^Z>D$Pd;3|GFx$c|1%6jc{bbw!9Y!K=JdJu+S6sd znTDBQT7;+z${h3cOsO+nwvsBqvy-3R<%|R&0;T&T2=8HjPOho)lXBqOGZ>VUl~brm z`AmP~{3{xpJZM&C*C*QD;FX zFJDn_W~q=B!77#Ny3h8?I<+gNbYSH!&~)u7F&{-yOYl5+w`BmsI(LkNP6?HP+w0U# z?2zHTW1bbTVBtm?(Y5&R7dg5-@ShKPniJ;z#(l*2XD6Lni|S$jt@kAJv$0|BH)^U9 zMYg}-)B#0N@xxMxltyn2+34)-fWO(SI3$HYeBa+J(HBe*RGc@EtPh#;;rXvq^N@q2 zhsUZV?9s$yAb&Xe7e`%P+IEEqRS&v2kz4&;bns@%&+`x5_$K!rd>L9UGmTAD$;HP# z*!16imU07hvv-4nnvM00p7Kv%_+Z&^v-2Jz4W@Ovi97YOJ%CoWoaylv~^E+D(J4!Pl55RW+0`}9*=wDhraBMF4zkh#aCaoCxn~xG3&7nP7 zo7PDk$-4oVugX>$Ho^j@GCvH9@-7fGu)yOtZm2W}bjXCBGLIj`6Ez|jE zy9%m+4*hebKKp;Z)xI*d{{Wkgn_%DQhmPv?-8Z6dCk_8ibPnEc&%0q&ZGHN&FPBG8 z8%My|!#1lmQ3!&S9I5eJ4A?J>Usg8`$VsLKruss{{)fMAt>M!g-MFGIoUeR*#Ix+1 zOOGS5FR{{pWrFK`-4W2GJ1!QRrMu?3At+YY*SwhjH2r?$Ti-~0vz{Fr6&XJTyGgh7 zZBSNWppu!Up`1D8#h(swbsTx{<4~?>Q&^KnU48c zVmU;1F9BWk4+!`kR?f2_zj|Q&CblbMRBytS@NOVB=V4X2 zc4Fg3L$_r$0B7JBkUhe=el^IQgs2XwzQj*g){RkS!f1p=Q$?l2_13%kW3$_F z*K^tcy58rp^)YQZMZCGbXYUe_{&9^fU*=MU!i8-UjfWQo*PZMWK@|-DumgTm9iCpG zPdJ%MgFz__pP9PXNnuhAS9Z+)3FyRj8;ZU!qjd;v(6ocIid)5d{3)?eR@o}%9K;O@ z8?h@Rrr|yFNUj8FMf+n-xfZEfybm_zAU~o(NQOyO@Mqi~Hjq-WTi9=#aV?YU<=aKK z#uN*l7rTn)fcknnM9SyM4VitQ+UeNj^ijYTq_>+nUS8meSM1MIe0BPgYG0DD2A)z9C!5>aPH zjPs{{{j$xU36^JIzTmeEVw+^0buxI}4;(x=F*R?0#z)d&j%T9pN@2i{3ZCcUbk_|Z z^Jso5h;ckQS9*rhdA*b7{d?G%i4@3w(4Ioa)cEy(AgK(QT3V)Oy-wN99S6J-w4T}* zUbi0-{~mBwu;ftTzW-GQYU|hAiD6%EVkQQpwqtmwI)vWn_yf!nG|f-Wv9Ykw=IK{a z!=h9(<&zpdqtqg+T)@l&wNEfVsiqITgNa=T5)!do;O34wG+(gISi?zgvy9{mRt!F( z>RQn$tDbPBJxu3v)jX}?gPB=L%GjaN@R#-h1tYO3)<5gd)`~Sq*$;B1(U^`M(t(%0 z39G>$ng+U?V1h+LIw4)pb?zVj%J9zm;-cB|e!$Wr{z`m*gdjF0_TWd5>%lWH!tOtc ztQ6=);9lUr2ytd(u{cg-Nip_qXnL}Ea%v8D9O4iat?L@VrUH`Xj~%;#Eo|q`J*^l8 zI_Zw-_m8hzST{$#_t_jim%k2dx)kTxBPX}W%(`rpQPlVF{k|r^cv#Y0AlLP@Ol6yR zZ!LN0e;*h6nvk3E|2i?LZ{a>Ziahb6zI%9ht*3k;^>G)JmWEAx%J3gcxg9$IIf0{e z$KU_J^SnXdoiGXkUNI_@I7keY9aH0OcY$DGFD46?ks&zy6j`mPYIOUwNd1V!fY;t& z)qs4&J{6VQ-6J5|FL!lyMJ*=xM13@DjK@C_mIv;*H$@E%4QAnYTU$>>$HeSU&?M_V zR=<9XC9!{GPNhDWv0)mM5TNh45we%K?EjExJSf~RmaVkQOZ=xWIZDjgiM>TV)*;@; z=*fTbbO|8E=T|lO$Z3NkWOH74VBm7R~&ICg%t@R`n#Tw4gVWch7p>Ka6FCF zpdT*?Z>O$pMi^UUf>|h-TZ0Uup{1o;B7^|~Hf|wsk)QVc=F&FTYn%rO!cp}@m$-MLQ`^A6YIE6ScxotgS>Qpus;Z)+P7HQR)2Z`ZAO{&h66~~n9?YBX zVJ_!eN|A`ety6yTv8Q-97Z(|DfHpP!efBQsC3Rv9@LeZ{?$ROCsD4u0diN z93F`IADX#~=Y2qT!Ff7!=8X2ymt^4`$V0@@;>YNURY}QBha%#uev!!wNG+7IYIrPs z>j}1U_$j00s}|jFmKvN|OUOuDO=8!7$g*E-Ut6)HUTN{q;ga7p8ZT-H6jW zNwmc(TtE`Jy$ZL+FhRt5UxcbHc$x=q7XCkZ-06Yx*)*M)HCW?fWi=vXWvXoE!+An0 z*iYi{!X32PLH#Yx)HB8&Qv0bH_Kr=yrE3FsdmU|nGS>b1^XDq|edEr#qopiZ1Q=9t z_MH)8tz(@hj_RtyA_>j~`zTC%om4j+{%g%a@OM zg+Gi7x#r=qwB2r-=jC*ZCQ^dnFvo{}N`3JH*GabId^RcJ=i?h3-c<#k@gmcno0F$p5y2B`liBPZhP z$n*>>6K=}?L<{OS3Z{drhjD`ez7dj}1dAA0G{}UMNdw~bj_JAcMS-oJMsy(9qgva~ zd6%7wtAwxgZMQ834R*gmGC`I*cW&DFClE@oCvsj^t@zg)w^lkOu(9_*G>Mr98njJY z9s`q-i?3U?3XcaVz)`IIcF57eYNY# zq9oo`euBjs+rd&eMFz--jN5mlcdW@7x}@Y@`0D3WTx@J|)_f7LVQi3eN8MdL%fu4` ze>hSKlR68nx#nCb20n<&sIMzsT2E&-yieYEd=hyBqxO2gzZPCOh2K@&hxJr1mjzvR z);_4`cbg2eB}CWsT^cEszL~e%y-7T{(Y{Hl>(HAv3B+U!Et&=^5wmc*>4X2TbRakq zW}SuwCYCh0RaB|R*YOAlT#T)pD?Bh0$UvHKacD9jX(%6T|mF=cglRln^0+T0rf-v^T1H#S``Oc1^aREP<+^y;W8T zuP78TqJJecc_=szah+4FFWEr{(9@oBqn}gs;c>m9+B!yA4Ct{UkZfanu9K#$0j}H@ zq&LcE&baJB5p4e@F8VJW9d8E?@HHn$EjnLcJ`kfxl_c3Oa&AW>XKdbF2;rJV+V|$M)gL6SWP4S?C`_v zsoT1@A&Ak?&RKnDLf?YOrS540JkHu$33(VprK@P3ULtk|S8T2hQZpb}7$4 zmrran2m#E3!NQn>o&8l0vCR+>VE{3>7>|kEjMtBtX+agl?~w3;!D#pHg9pnH(b96h0~#Z1weegyhZN2qgEtaP zSZMKuNZ-~)i@;3kZJmT3ml9t=)R044#E@@gK$)Tc$v-zcp{%HwY-&l(eT!k5?Q=n1 z@Ele3ilVmtE!a%H(^ zzgxG8pwPAGmmzD{yuFN`4~9^csqfdMK+odTXlme#tj=@L4JwZ z($jhvn+BI1rihAmwpbOEV1NtY;Z2So=xybr{*zWW8_w;-fr|{1^QTTfe#y4gX&$2# zUmDyYFgfyU_m~|M!D{k1Z<3v!W?{q~931?0>l#pz{}h!iP32q27DEs>M$*rt=IWqJ@6cOW<|R9S>+44&HQ)T`T%GR4XHAyh<*G2#y6sx33h zL*aVrd(imAR7`X2iOghCv&T<7Q3 z&Od$r{QWt*qzcEFqrs)qlWlr%2q3Kl3X@X4Qpn}fz2hhEqdLWbMNE0Lm-?p#=SMt5cIrwPGis`iepCTn4HteU$pq(Yzf z;$u{u8HS1&L%*G#ROyo-eqP6qNuRaL)z7rP=D0OC9M%J$3C9BP?NEF0+cWZ-ngMN} zxv`4??`ZS zp42iSFPwUuFifJM=WV&DC<5$dHK;oX@<#S|nSXdhmTTV2hJDUgdkIb@ug%yui2xCN z*iMvrjRxO?vl8|#V>6_*ADaOUDAGC1m2|O_{%?RZ!^sx1Ck&<_j7G5Z1Sy*h{8;#D z2O3-{1Qp$B@~AEm;t?N?i+KQ3)R-S3K#tJWKMD118LZ5pOUEQ8qG4bZlKd{L zFDV6Oc5va}_vJUJ4#^fSH1h+P#J5bQxkPMyNU$#Y9E146?@Z zcu7kO3wFJA1H|b|U?!tWG!y{?!$&f6)R(Myk{%(-BK7ZRM1*QNhmCNxgh8Xhw+#D3 zuUDM82&;8$YyRzVg8X2w)qviV>~$&ILR}5h|NOJNE`g{+_}iF`7A@FL7sviDzII7jj{Bn;&k4SX+B8_|EiR@L3O4Lr(Oj>M3=cK< ztJkmhe=CD~Y6-{o;DX9wr_y^$ri-!HnFW=P}AdQ zP`FJ}&s89EEe4N(*cbj7XrKclk5s60;%X`2Q!@gI`ve1bH{?|eYRFN83hOgSgO(=7 zSmx|0zX%m-&d&PU+S70(grh|n>`+mq))*39bo}TfJMkz(AL*2#WHRyn+c)3{Y0fXv z2b0aJ2wtW@`(tv55GaZrsR^#f^drsA0Km1Ot11IiRDGe;Uaz~fMVn9;HaEhZV$JV5 z7cC;~Ei5euW))nZ0w5f<-1>O$+Q$uSda!eP1uMtfC<9t^oz^3)V7tp!>!07x5<7Bq z1Nh*gdt8T!hp+ZM4XnEr^y&k9qLdht3T@7qZG(V9(#5i2^ZgASHu2muaDNDpFRuTh z6JO^rl?N|i_^qe42!ETKW%9_poQ18HFqh6~YO)G`*yfsh1~GwbEWe&5W&=};s!=j_ zMw>}iA}A{tfz(R!{+sUa4#ufsE@)|*LmvXK!+Lk(@d$f?B?vMQB!S|_VM>+QhMR?9 zr~u9h@l}Ty7v`wkE(A{lAJL&KQ6=WH=(*C85;Bo|xZ8v@s36E81>Z)yaB{W{{x;7O zS)k+9NblJ81(JaRqw$drgFF0@c=qr*TLs?SMlJL^_*g*qQWfC@@Mx@q=i17Z4CDF~ znkAFIo`}X|lOds9U}v7-(Rg?gOdiX;AbK$~mI$-{TRE~|adV^amFr~3764ifQf+L@ zmaE%)Nq@CJ)KD-#Yel#g0R!mo@dQ!tZ3J2!&;ZRU*^=-ZGXb3>EIHQ^Dl5oK%ExDw zFvz0aaX+rXe&w=tEM$WVtn zm#$?3F&aotOKlpOTc1rLi^*fBF21fh)O`d-yX<@SvXUp5>y&y_7dugk5OzSQ+=pRB z&ScA$?v%9VH+T2!*`uwZSZ%uJ5)LJ%RAx>c*u_DX77HZdO(t5NA(>td(2=H12J62cb>z%*e=K59YJzd_jXn&}Co)SVMG+4>=9y z05Q6HCETT*0;r|zBO3{EME+>O0IcAvJHR(kV|_C}?RzG4y;J7lPHZqk^st)z1-_aa z7RQ~;qu^ou_Amdy#|x@o(@}NAlrIW_s_ZE#->|^p6LI5=LlYbU@@)BMP{!g>_+m2@ zQbFnwZCILq$gna1BL4l#-m|D2;pJ@Qcx)xL?C=(G>%Xw(eqmby`1P;e(!+I#`XB_H^OW1hN~Ig zPsqbUf~gFXHs4)|Lzr{;Or4o1>FH#t1B%pyQ&}%U^Wb-fTn!^!qIq!qIlU8hckt-5 zXue$Ju~M732_JhLAi^qQPbcz1MV{=Y*CpvoDm$6u-wuuv`YE zuBp~~o0Chx5Hv!qPre~M@Z69}y}-J{nU}Y}i&3=&2D$wfVUo0x1k zNn4LRv3H`;7_-8w)uzSRPjM5#+4|KrGCv!Y)xm=qniGQX8h^npP0NaDnnP_af$MulrT;V^>(qsMkI-9C6X>7WUJ=)gP6v1Th>2EGTQ|K`7C_C0I zq4dG)mY|z~NaF=_d3xAW5MN*tAa9i12l*T{y5PgHEjzZM&}zgJ&zT&<`2*YoBWA31 zM)SZ=9cs%76rGRCNamw zzo-7NkYJ%%!|Z`kEuzK(!Sc70JcglL98th)x?1geB$>yJwS|}_jWy|_!*_L^*YBV^ zu;V@lWRmN=qC@kVC)BVEd1!RrLi#sf(yWrc_hDu4X*=c7R0Us&>gIWF`z%B z;k!&HRf2JWRcS=KAUNj(yKvgZBM}+P2zih&;$ahH#oM};Rs1T7Jy^~dBap*>XX)#g z$J7Ib^svXUT(AM9Owk>V{bUtRd;yE_r}-4eIm4rECi5M#bPZv0rooDbjb1Tp^9nny zzIjdj@T`;G+O%6Tspq9ebHm|1 z*I(JNNzl!cl6qqQ-3Wi9?QiY#3S6f`b}#N_l~=S~C+?b?cz7?pZSROe2z8kK|3#Sornz_ZuC#VP&54Bsv_6#*vqI z%W$t)JTx?9Eg8xorf>Ja%l;<}2ERSLp`kYi#$uo7fmzv_DaeI5aE#He`&3~=pQM!3 zETsW%a(;*)03*qZIpnYnb8B?J`$5hjG~ARF5#nRS#>R&KDL|UE!tLSc2&^28>R5UB z`S+uMR8_Xm-MrJvenW1Xm>?sq`Lq(WwgE%jvraT*^F4XvWMtL`S6qkLlMy_ptaBb! z{pCNgJn+7BoBqy_rk=^oQX3xnIXIjM<<6g7ZG2TpQ^Apxj&EVJA z5b?7;;~WnBD&tUTt|^MR_}59N&Wn=OH8o2h)`CSZ-Rv@GRe{Jt)gb#=r3kGo*<4c~ zWq?sUY}Z#Y?$q}I=lW$v2A15kZ&MtFy?0l^{B%L5Lyiqd{20EG`P7wagHN{ks8KM+ zK|iOxjOEcDE*yj&PKO*e^lC*2v|!_ZJ*^7SLTFn}U7hIJy{v1OAK9_q*f|#tAld?i z^$FTUX=dVV-Ieb|&^|q!V}qs=;?GZL4z87V%fm_oL#DnZ`Q_c%GkO5kORJ?AP?wk$ zkP9!(B?%aGj&?|^flYeveHuVPzxcC-NDwSGLFNn+t6QJAMH>8=_Ksp7lZ|G<{q0KH0*s|1FjqbZ zCPDmDkHXVeE6&kojRtuW5(@A#AdaICZ-9JAT7vWEJD-TZ%TfOpj*c2fg}n@8Js} z4<~WI#k6>zks%L(CW!+tEt${{eH?xx2CG!o+_L_7In-iz+Q2c_U+Z1I*=C(0t9wof zHQ?@}$eMlMcM*HW*XHHrk-srbo70xDb|0WaOWNYP;X|8}nwmB$-}-QQM7P~2wTXS5 z*Iwu6grt$dC>(0;m03d z1aky|aqje)GahS=j-=;cPL8dVhILoe|GE7^+P6NowfRnu6l^W{Sz(n7QgZC*CkeWB}v^rHk00@fJUB)722uXJthwif^Pjz8%%)VjY}i7T!uwQ{x^=AJXr;^CDa%d>Ji3{)HDs!?p;Kg zO|Lppg>=1X;3t~ko5-V;zbG%@Mw805RgQj<`CG@~)`WUzIP8H1N!rP~!NK0h)-!`9 zvait*TMssh;PzTZ8@P9qQ z+nsvZGTSW4j*J6Ts??x^6yn(2sGsYn^cG9^^6ph%^$jV(C*Ao#HV;Yb`Abxv^X?m~ z&)sx*k+fTmneAbQ(SLhycE$>m;8!1H8*j{-xVpEE%&)c*&0kcO`8wWYF5NsaJcWBX zV?LAxHEvaOd%ykVugryzi(`Lu7MAexK(pJ%cMhx$yN%%gU;8 zKmk*A0p&{879hRAtP4^4l|7BojF+ZV!YSc0loH6CuZd4nK{J`IC| ztGE*4LuP5suhkx| zkfWah%&_EK3-Ak4$KkfNf`E9DKIqqy9Bet0%pp}DS=>a{{XIPL^t?e%Mn>Qmqa!RY z7x7XbS>{66Y$B@Psq%Q>JNNC5Gw>rtF!lrpd}lQ4?HQxh>;Z6FM6VZ90FbB@vN`Cr zS7x-ViLbkbx?WPM#w-nf4(l^7jdE_e{7nuAWcR1(0|o|L}2rWL#)IjZeN7J)PAo*;(_1Vx%<|u~`YcFR! zCB&q7uNY)kZ`s+tW0%m>NH3;E1b3Yq3wM!uS&?>hr~jaH_XDkOFsa%KpfOA^*A8^c4d-T8nuy+FvdyuEOJStiCmdxmqdSbt*O&Cykk1X09X5le7H>bvi6ml&vWxp>jveh>f)$2u=|MsJh7 z6EFu`2c5;rjOlvcF30>aHtht>Uq4Z95-la3Er{XJEp{d53>N|BL{sH^H3=4rrOtN8 z?rq151cRY1ws;{So_=%kyFZ-vr&}klt4g$7(yfxYt16vpulGx80?wj88uFG%Pu1Nx zc5GUJ-l1ZA_r#Z1MaADeO~PFm$rkw8H2H|fOK2@NZ>~A3xAdJ*;$-oIHSZrd75&#Y z@$1l#0(5;?bh9?2#TVE?@wVjCX*#2rRV>{j2y?VN)feWbrYp#MKAbzI0(^tCb;Ml^ z=WdJZj7_UkZz!;dshaRP4@kJHX@xQRMWcO9gRcZ2or|ANG#syp`pU7*o{5O18_a00 zdA@4?J6*DdHT4g&u&~T>_V*kU(#u}z#(sL&qrD+9_wKF37~7&fw`suP26Btf5Er*3 z{ZhH5B~B!OK%4GkeSq1$YRl z0eQ)7I?K&+w_N&kO`;?0MO4%h0Hjxet)u*#-F(F2koa+zB|^?r>dDYS0{okpkoA*3 zRRaS9)$Q#v-J-!kK{#6b!Y`0AIVOBAaQ!Y};lBV{V1(n`PBRcFnYs3B9wbp1tWr(V=IHPqMB zMCX06i0J>hhGvPebio16LIB(np*O)MtDm^H9)?IOoU`rVe4?48zb3GpSaM_6*xUWz zMt8dY^gi^g>j2I2}}aB2k!{f zu&5LlFjNT8Q*&aK+ z@7OUqfZcoFSvG2CShAUHUfXbqVJSoM==bHPelbHpXIOpZqk+j)xSwtUFYN2^a4EK^ zz;zL%9V_el8`J6wZ&b_7_~(MhxqSw5eKx(~4kreSV~zdCPR2HFR57tISa^dFEZfi2 z{z4j?2+MqNEo;}Y#uq0tU#R4!mH$6%y$Lv$>l!w^lBr}UWyoAgNl_wHrUp@=R7hq~ zks*>!H4B}Lt_4J&GY*K!% zvqOYuxXZD<%K&J3=*_892ZAF%e*eyfN3N5k08$)tkyzC5jumrLpgQsT zY3Id(rs?JRM1hzZEg^Dd+T6TJwV&De!^8|`e8@(sCL0TC3O(7Gq)5d~jFG5Y-m{R) zXD$m@CI+0SHh5PWua;xtc6&QO#xkM#Vk;X2c%9=HEE6$xeR~V+nWG47`IEONbF`7Y zW414R`cupRZr>)e-gw68=oijgA|2ARf`Uf#CmJ)}ZLmH4Nkh+tMbOr(j@@y)+X^Ob zXBQ&6)$oR1;d9@Mu2d}F+nCkGMbvxOXrImBNGi{ud*_7G6aoVW7%~XfC z;mD53v3M))VrJ$$UERQO{P^)JkIGTuHv7GOD~R(19jWX6MFi9tnB|rov$hsR&jAWl zb)O_Ag%QG!IL@4%ok{io!oHUse;cT*7)~3ssbHdwj*gDdl!)Xi?SruNz5C7NQXfTE z7<%Z|tXY$KVXV&wv$BYC6giYHU%ID1;8%oZjzGr{dv=8H4dSl036M!y~xrue|z%c#8nvvF>w)rB@=FKlt?}oT1QH2ouLw) zW9+cGBioGnGTI-Txy`5?`NB5+OcGrQTL7MXYSuOJe}~HR#FMUNOR4#h`FW%DR6~;E z-`-ctwGlq*`53Lxm(FAS-?x1iYahbeG%y6H0_%(~uIZao zg#`mPFB7i+dY}zD676fC)RMZ6Jrw}%@JEL7lAM8tN20$`7rj7vDZ4$O6FAZgZudJ_ zp?6CRaGsLrBDK8sPD^y21=rG)?W;jJ;G+W(^L@4fZX&b>^lw-9*hrxgDcLzk$FE3) zETH9Ou(gVhyGG*BCU*;bH)!?_OKZK|BlEC{_tZLi`jjUn*k**Jz}f5jl-{gW4>blx zA|9n-Ml0{}PTkkf?`3W-7ZfF8TTP_M1c_xhBEt5Wp9*&?F^FtQ@M6Byss|>T#5}Y$ zDn(R(C)Bdb_;XjuFRsh;?F5*pnj0PX)#TCiq$b?=VA+^Yos7bCkhyPm>6pW!=}g4< z#Q&b`8aJ<|mY&MCEtD+1qgyr%Z5VoHVLO&_zHlfXPE`xzF>C zg-gib%Cpx}2@4C0zs`p3`w$2ixSY~HOb}o(3_X$TzUJEk3I#97_?(?{6^_@Q(#uX+ z9=34xf#xQ(W=eI#mC*9OlI=!U#h(MEk!7MB8QlKRWC&b?kWLO8*-S`;$JOtT5Gtz% zZ|nM0n(WJ5CG-DcicJP0|)f(GbJ$3NYs?83w6*wAE zvG=vwk%x$L9D0+FGcQ(aoA8`K|02uuapQAfQUpG4Uh?x}Kvr!BqBI_!;D<=|#iM|I zkMMawK!jBGM!1-R>IQ>CO@e1?YR+JfmOdXqWeIADkq-A{K;!pM#98U{363kvho!7rZ zL~e~IH*BH+x|1&^Ot6`MPhN#f?MGnvo1`QK++azDeY=3U8q_zU^OFZeIASXB)ntf( z<%)`m*cdZt-+X}?R?S%^I!wu?UEWw_wy=IjdnAqzz)$ZPDlet@Sa=r5)9&LDXmLvQ z`7qoaHTcN}tKFSnvEg}Y)*&67jRBGvSY;ZPTVk;0Vpwi|B*#1hT+=!F~q9gne*ou#XT5oe2KmDPu0yLL!u?{NhitnM>ioIH7&p9{++klk++#N zXytmljUY`vZKjX8Vp$JgqMaYxZZGXi>Y$_8BFJ@;7##BU_UPU?|2#2qk8hM0N%yRgYHIuw<90zmY)?m zucrb7EaKjbo!zk!c}FH+Ct0y%ae4kbZP+e83}bF_q#rLll4m6qhN{R{SxWISKt50) z+@^+Ip$!8zfE{UP=8Xn7?^6Tm1~OWihC#reRq-*JUk|8>QDPW2R7p5Jp{;xZdGrP6 z2O#rdloR<`;Uhn}j_Gx}Z_(4;5;+><6gqG1Yr2;gh7aO*LgDh2-Hdse0q%nhSW<9& zm7tYg>s{=IZw@sWH5uX3dbkUj$0Yw3q&ey5pr9!pwykT|I(ya~I1$lyVwL-j7)s9_ zMVpUi?UTor@0%QE4Adn=gUftIoK3e7aeI8~$gf{ri>VV-dmeqj2Lw)z+o9q1D#gdR zXzt#>FOOhNT%J%qOBmMM-@ivwnwOV%Tk7{E218&RP~l5{)^YC?nY&*%a8yO5I&jY6 zS`Or6u~$qe@8f{cFLbAZ%hl$g@eSUq@4o8qC=B9u?I>6UJv}6QDbx`m%_?)&p>O=Q zr|xu&pinVLVS^gcAmzJZ&UQ7p{!=u3F-|-(KHk@gYjASzVTJV5HQL(R@l~A&h-J&} zp*0zLL-}^Mp#-zCNjhuQrp}UQtcRAW!}E#@3jWExCB@0GFxQx03Pb}~_85sDke23d zZEXcfz7M+PHoI~CrLla^^1y%8qh0(e2v5e z?#m0F?Pp$r^SyW(@9U}e^DR7jcCfo-I`0@zcMqgtTQ)R#zcc(urPXYqrNv>Qm0PYl zxd1>GI$d^%5O6X&y=Zi6(Cr@?F}W_R39&O|!c`lmErC_M&KIc}c-5@d`|~H|&{Vy7 z##ZE@f_~#Rjm^q>>LTMbxWkT4t9)G$chWgQSOyCubP=YBf_!o51vND_4t(F^-SIXX zD=I3$D-w4dOmi?!CGGQvfYuwOC9kC9(=q!aM^=O9u;V$X+fmzyxaH#z5nvzKEw^m^ zwX$v3ne_g7dOgNAC^)zq@XDCRErj)qizA zmMu{3-^dCTn~wm}3gntwnZD;0NxDRyEo=`HS%+RG3^zPT$`4b0o68?iM=S*xe{k>U zzSs&KH0rcr%6Z@MXUhsBn{kLg_UHa71S${C{_<)|hQEg9!=dSG{Q zTE{lU4U}@8myb819!3TF@u{eZ-7?1}va;S^{@=<%D^{bx6P?e^!=rHP)&X?Nq{?6D zJ+NG1J3HUL?1!LQy~`XCwh#qUM# z`>Fabh9Qv%Hy$ZDc5hTIu2N9r||rrKJHfb#vjBJ)A*l4$GmYWV+Ug;+$5Z$Me^ zeY1&9j>*?{*T%K};_gegd1(R5l_fY8YC4;NmyZk;9Y38ne+EC*_)DznHEn{F|+@P35M zz-U$spoJ3m0Td1FAgN>kE5qHCVmD@h%e)f=jYhu9VUU~qw`o}Z{Is6TN^x@H6n{>S z%&-!ei#lup`3wyGF}7GwK_|x@IBTqqvw+sU09Prf5w^1!vAhOoJGb)>ftKhCaVF=d zxvmlAQNo4lrZMy(05AGOU#EtD>F?ixFBIi*7AN(i6O@lmc!CSsS)Fz9uFTr&|7iir zQ=+e^1m8HUh7SqFBZ^}a&hLDRkL%@7C>)34)U?T`P>;6dT`)k! z^JAbdjyATFerP&0wQ4Uw)Wp9*4sR?yEZSYL^JVN__C3xI07Vh8^isyP#22ePMYZ}n zD(z;wn8PHksj>Gn2NScC5jyUlpJI_WyFJ%r5v#8h7PUaVLQsN4&O&?*NZN)Ng?tTZ zh>>=-J3`&E(8Zds=fpE!)5uIg$0xC4yfP7+bD$m16xkJgUgbtz@dp+gGV;720mqEG z-$y7FgSTN)NxB-HrXvkJ{A1M%nf zOYwg&eP`43~h-1JRcDIADKmW!0>A zyt5|7FfNkzc_qtZlOao))wCw*Ukjg)J+qKLli9M3l11K9wfDJp=eo4JFk!G@2gD#V%Z=Th&fuxV*6V} zZ6&sbHWm4x#PG`gd&J3wn5|0N75X&uE)lXqPKd6kxy_Oftz_JV1ftFAEs1nzl#-Id zJ1)+xYBNX?iP`s zP#0hq98}mIu-Eo6S)?Tfoz6o}`clsH2!!?X^Lu#E&|4I>aZZRoSrzEoH#E3;p~A)C zYuwCOZl2K%i76X5gK~D#tVC1qub8rFDJF(ZoqKhN$W~vUuX`TzZIYYJa*}j)BlgjT z3^ikT734yXLP9>x{4hxQqNHYEXUE2`2(!534?A)`yg7%cR$dez=x%&_1lkPJE+S|~ zFGZujN4KnxTYX7O>tNrn;+AIfpj=KVn;j9R17JdXzU{nfN>_cm z5~W0|nEpF$s0rWG?s%?T{*kv8T^SA})GC@<2OW-}F9W*(aX$>yl+ZY#)t!?}Tf(1k zV!3NA6~?PryY+;`*kr&;^QJki5>><2FfX8`8V#@(;Qwt)>d~$LJ)nr;`@X(L3mN%1 z&=aeC3fz(D3V^D2(y04$qUG_Kt($a4#dILl0ZwCbsKeVaELSJVBq5d6rvwdc{Id<{ z6WF+4Xp003`iD5}IvJ!uU;-53fN9mtHBG={+y!b16yt*TZd9UBwSULNr|$8ri&Hm{ z_8GCGxnfNiPwe54bj!hx4^=l_e!TmYHdSry2gm}J7Ys50 zGZ!kgRM?*40+Rby-!WRx)jVcJIy+vj4i~~0Fa4H7j0ht@!{q!!bAgZ?V^#HS+zKl zo-R&0)@|FiktG8egM@HTpR-;h(UUJO+I-N)8$!*8TY9WP%c9dqI4>fq6xV4lXFQ~* z-9WMlR)sp3uzeYA4s_-j95_wMq0ur-f;7({f(2cH9_pK<{3WTpr8(0!0j-G6ccx%2 zzh~bP9(f*=51%Gt={lXcDA(%eEEGeB(`yvA2$7Da1)EB!gk0=((aW?@hftnUGl0GV z_pF+^*}o7Iya)PNsVGHOU6p(i5^@)RPEvEKw!OVtbLt(k2_q5{=sCob)5rF2et>SS zZ&7sIi_|evv{0E5#Q~`NsymqNZr8s9@xiTzi{ktD%f{A$eHG=sdnYt1{?0VKkX9901dk7t zRJVXQ|H)&Z@Pde~%s3SdxP#85zJ=+$x})NrSbxPURpI!JHPLj;C&h5}ka71=r~nLu zhOl&O%*%Ox3LfvEw4rE3rvm)X@edPLmA5{n91fisvcHk>t=g!rpg@Bx%>uTZmo|Hg z_KF&Pn6MMH>k$?pDZzNK5YqGPt}94+jU4s)9R5 z7RfybT-;n>BiVSv%?rgOMn})g4JM6!Q&Z`LZzCo=m5K%9gpV#SL*7k+A~ry~?Mr-V6~a}k*FG3l;i;Jq@F&=PyTg&|Pw)it+VAJ5)1V z@!AA>3H2nM9!`;{n*K*AmOT}lq>|BQBC>OhJ1^iAa;gLZ13_J=c6MK%sh+;wOvCOv zNCt>#;&uJ6WCIve$hfGa-4X5&M0D~%Dy-+?I-K-t2znL}hY~F(|5%OQ!i|9M2=5;# z!LPc2#elDo4jSUQ7tT|f;S;Q2o?z7gq}JThvQnT6I_|_9yW&_r0LB2P&<~;UV~S0132RMUDHHIKyvCK;OcOGN9EC^EWXMus|bmkK!64A zukvEXuZX`ng$zy;+;I`e7&sf0KeipsZ3OQBojW#bhz?ByHS`m0CBUrZf|dIO|Bt)LloI}OS;&D z{*cxez18mB^th>UY;Zr70x)G0Lm7VgqFM9>fDB+9VZ0eXs|%>kdpiF*1w|qMcQ-Ep zWt`Bp5iKR|FddiK%S7dCnQd`7q1}1973D!8I%w#f4pER~9B$TcPBY|Il>>PUv6X&m zQ!+xB%$nYLxp1?y-^0mK+TC79#bRs_e86zCt(zCKXPd3f!ym{gyU*)6kPwRfW z+~`lHmke~#;6|V9(OwJe5x11Xd2VnBUNG%L=8)>5l1a@1iCPgVNMONeXxbW|qy0oe zo|P3W!SHSXmh;EOKDwk?6^MPB;xdJH6AnD|6b9F2Bp<2Po*BKVI{>Dj| zLGQ0IX!?-<9we=$5lRLITP%hJs3>Q6ze?8_#Wtg;gKre$gNwCqwR++DuY0D7txrTk zWR|<*?<_K${hfkdC-iwyt5>7K@$m4_NHwMh|3E4noxb#)isq& zJFRD;WkFTtdvgjHqrSFDdwqS$#kyQjTSV`IfdRhNM-sR=qx1Dd*w`jnf%U^Rr=3(` zJPpa&XzPf}t!9T?N*a4YL%C2Iy7OwNr2?szBb48DyO}4<714w1%?HK;J<6Z#lz-s1 z(smX=L-%p!@VP9Nqem(6kIiF5|agnE{x92&C%HD6i2O0wD(=(t%1NnoIpLKhbajZ~|Iq0P$@+18+|OvQ&`_lf2VoV0ifQVc9Eb z%@0jm(~$4ERmXF} zLO?6Cx`?L z5??;y;q^|dm9lNRAFe)z2XS~z~vY(u!1KSY-fVB@G8!OO$*-SuGO6oq)E4055cvM~C zK7al^tkrJm?dBQ9#;K8rlP2gku&G!lYD&2d{OX*RVS2D6EIuV$zbgQY+VY;ikj)^#AE?&ZggFV)$nxFq+$Gdmum4C;7&!@0Z4u7n)x(|6D1hRD$ZWkxH zQ-G$Poh42#H&Uzvz9$wDY;96bq8Im{Eliu<13uJfzcM8yMaiYfd%bV9+kD?JX)tZq z`nvu3ZQ0D15EUP-+5WO|(8T759Rwc$1j*z*BBLY3MHdeA98TZZxKwo*GAk+!oRnMb z#)m^@QFeZS zd2JDSx`Gc2FZ_XQ`92Xr&-Mh9dtMyv3X!|#RH0y%NG$;dWv^>NLE&bUICs>#evd`z zexucN(BJvK$>{u&kvEwjY0BC@eoU5Em4qFGkGJ{_ZP-Kpfl0RsaBFvf{=>R`r7-DM zn>`IO_vq*JU&K}A{a519V&CH3cU_GP=^a5yLGOFOi}COT)9%pYX$kza6sQiW0eu=@ z+OT*13irk6Q{vvK?{c&+lk+KFlh;v4MGFk?-URv8!IC>rY7yB*Z8tXg*RNmy$<>jG z%O58{*_My@uU%-8u29cp0s)oa(D)#z+g!Yh7ftAtL;6K#-&ka2wmLTu#f z8c9Qs0BZ`!Y%l)lu#`ytf9xf2Q%UzsqTym&?Tp$=Qj#4ur9S7}HMErXvwksGp3lx< zuX{)@L?EYMOsv;Xnj;#pS~Gj*g)p9M0SHsDcQAvg^-9<4+_3xZD3AiL4nT1-{stR# zOlEmpX2rk|#j{9@Eva&Na^vsJZU!QO0Q4O}^AkJ1N~;Lv$_g<9++Hq!+XU;SH;vf6 zM4^h9bOdZsLlX_5#)rd~(QTu2$MxXcEd1sVEs7UXcvBk#LPt|+()9T#jd&m*Ed^1A z1#ruNXS_!u;LtGvgCk-J+{KV;3}j`xF1rBoCN^c0P%WvjJ+F=($wHy1e_e)*Jt6X< zq%%;RGdVv1CxlA+^RflHU(SbLNo?+^47p>b7fF=f!NPru#S_Sh+5nTbb;F*#KA+pNyriqa zE-I6lt~4I^b$r8v&qjV3q2ZvfC1dF`u_5*MJtY$cvVVV|BfuMW+wTv9*xZ(Uyxubd zzlJb5Rg&ufU`*Sz9~)22t^Ha#C-@EO9aA)f_@esu)>YRU?c1ApI#-ABuegBfylyvq(g#7%S;3^Z;!s3< z0?~`(9RUk;)czyFMMMX~3XNzkkWxBIZgh&m|BkGypQu?-{cXIcANJi-aU2uBOI4 zg$=otl&)q?`v9DPA)3kYSN^6;`|7cb`dfQkyYNI5|Gx0eIF+b0a)N%TaveXlJ)nA( z7jQe`ip1%MdKW8{%&H%3x~=4|E*SJ3P04e82M^na&&T9lav6Q$*lt zoOI2lw9g#!;>oh~B-aymLW27s-!It!R$HV5kSgHtx%9rb+7uMl_fY!1#2D1c(ch+y zlKc;cI!@E5h0+WNFJ8+X z@5QA2g7Z_4gMv1tYntG$>pJC+oUrM66UqOXB1&6sTD*Z<4i+}Nn1_&NAY9dsL*^+M z01OS32SdpXk3yV^T(v6Hosf)`MhGZAw)q-xQr9q@;tkF!6pX|_3ttcUb`C1G*{wGJ z%wQQs^?4lF##mR=-p&|R^GTu?B0~a*j0~QZ<^~Z#>x2Xc;E4#4D7?RE7xuh!VZCBiYLJl|%UqXIC^iJed+()m8jxY(eH4b?+sexnT6D9}G{nbDr_U)Z* z{U~*6)4B)8SA%v&UJ3wFe?QT0m%3}O5&1ckJ^#rTy7wih0u{R}mW_0!b&%jdg6LaV z)AY*}K!0~i8Fw+ZC=q^<3l&?AfZD4W56Qaft_Xo2=nmUTg~eaK$gfBy7pqBm($ap} z*85gvzxuGjRv`*H3jC{(pHw%DJjRFK)5!B)C&XcSc_Gw8zEG18O9qiIqt$BVXdTY0 z7ks!@YDOMvLsR&5A3g~x`Jq#5CQkE{T7nH|ZJ3%G*pYWqy8ye#A4QSiuY z>+Wc#`M;t#^PjqkZS#XW47R7&38kgARvgl^PR2yA{~DXyXi|!c7i@T*?!JEg$FKl$ zCM71tz>XR(9E6+O3Jp7e9Bky`YiTePa05DngR8)Gq0IGb^IEiuh=2h%?~>-Ir*~V7 z)~;jM&ef{_X#omWMJ~R&eOva^R!Wk-L%DqvWX-$uVB``ioIL5%&RB~j4kQS|n4NIC zTFp&dC7ccPd)$*BTxUP)Vg_}0-3VYG}-|~x71|n>SDs;Y|?Q}kU-6RTvBIIlur#AJ;vh*;C=DL8cC1Wt=9mZ)u9O`|e zjI8Z;uBT*YWBW&r396pd+A~DV2U7}A;#X&P!p(GOpVqTy&-!_bKAsAKwzpwo1}RX4 zb|T1!A@!D%%<(|Y zc?kiAAT?I4r@emls{XpS05JYlCXic(lJYy#-&M8@u|M$@0uEjcl>ju8UY!mf|R*9*KNW{slxkA!1v^9px08;{j zY4AlNlP*X$DQPbK=4|5$DC@=9W7P- zJuo1rt!NIiqpUX<1L zz5;SgXtC>TEjyI_g?H}kyp$c-TY%IY?8voV?rORoyX(r#GYny#B@<5p8Ta21RSL1{ z3R%EJwlWo$Kg@H7skWNN0cpQE+>48=(8jU7)$M;hfhn;&+ z=;1^qD#s-dMNr3b<2Ql2&9v-vS4kSEOz1nhDvPKBZl}wynDJ$;5mqH=ns|P5jb+01KqBu^ns_RRw*_y zQeWaSBMKFe;!jVNvYqR!Z6vhe|AiZTZP&VV$(PtRmvnF)KrIl_JZvcej~ZL*gVzk= z7vh4Z#RTwJMA-R~@fTi^L%!$ZF6?c%nvs@P`BvF62A4|c!CQVyb3mWT^SQJqSS9Iz zc9=8d-h^`qU+K5XvpqWL&N(WkOI-)ZgzSVWso|%##7u09Dn15oa_8)upJsGl0@rW(|3L^2FKV`1S08p^H4fb={`^7e?ooV+m4=dn zA^>78+(qLrVDKaI)5o+Ikto*aS8j82D)8N*mfaQz{<-5_tfrZln;WL4DShzZ^YfZ{ ziHTKxS~@7GL0T%;=mLmG`L6+CF<$mn`Ug$#V_$K0RaGeiZ6bb?q$Eas)x9^D05Vu# z)NC`)K<{N8Q|5}ji*yb)c6K>#+SEA5Msm_J-cjVq(^M_Dk^25 za7Dz$?_d~M-P1L08;nB-q>F;C5_%Sqmt%RoD_0Aw9{6kTVTh=G4}5C-)^tlnIm1T#=0oPyUc{yd3bQj6eQ+48Ns1`z~>t#>?+EW z5)%IUH4Yp8Q~Iw^2<^)M5ehkQzOkwSATvB1mR1GU5EPt&&HgvMouK(OruXLR@a&ua zehMEFH>+Tui7ypWD z)V%cnA;q~5v@XTqB!ms9(>a&Q15~&k+K^TALO%EJ;}~Cj8`VLNj?n0|e>++<()gp| zWqWlEJms4&aZhD~#Khp(NQpxqfCCC1Or1efP?;nWo!}O*6e8rBL{RuQU_lY2-ZCJsQrUAuix%|N$T2KX zy)CJWdfmpv`(88&{KA$y4pIy#FeEwMPNDS3a7DHxwCs!{rhC{x^Xj2FO1(B-e)RI? zZTK_zlSH`_8amYZK~fwJr&fB94H@c&{R{%V8^cFwU^pj9dc>P%gU zsb|t#oge&P4Z7l|-{UBo;xFz6c!O%jTKVpISy^7EfA{kf=*SwR<}EL%#a{fjx9L2N zKb$RaeHf=cy~W{F2>%v-bc~PB(Jc)&R!VAH9u9P!bF3(Dr9lggO-+V{Iyo%_YK=A} zW5pj@oT$r5%Fugqk~?H<(+z zNy*PnxGq1R;s?=?+Vo}fxku$j0ADW;eb}cxU#{vMmwnpBMH;D0q~X9qv(umzLe}CJ zHKbr1-Eu~DaA?*&ZrKs_3!dJJ^v>g&1W$n@vJMzK0t>i+#5p=Tsm!hI#lcyB z?eGLE_MAz5LIi{|sNPrDhb%pVjF$DRtYsnGBfHNPDEwcnC(-eQdDYg}Z+gGz{w(R# zh~!`SeCVn=c=X#E-wLa)QroWW3rU7$diX1fnAG|Y9jo^^)2B8Gy$|2W#6-*PS>S&A zc0tb3gbS$+O>iA(?#vul1n6Q~kqo2)aygR<%gpp(&Xp>(&#YWv!#xeHKkV!7L}dIN zKkkYQyVY>XVFukqxui18Fi4ulA?-8@jSC-!@y1p^_^_yQ@}vh!Eeya=pjL!PF$~`1 z{c}hL*|`{)rO{Q=pcKTf2t7FRJ(({iJh3`eob}OE%J~66N3=%Bih^+l>p$cciFzR% zlK1;8-W#PqErD5((54$s|c9@SW2ST|IsvIQJAOPN(49bqoweX5uRA zU+?;xf`T*{f)+pzU0OiPftC#28c=BIGja8HQ%xqhOJ7ihq5dYa*H_Wea*?WbfmH-e zy|N!aXZ%@{sJ256DeQQucO5Ki$Ayth%_NW>Zgf!~aL4uJ)pwU}*EW(vW!+m^!pl+0 zuUfgHMMm^aK8gt)L@C_H_&Dz?IIs}v9}TvMQhno9C0ER@-up`!s%xOJq>GNKNp90Q3(p-88 z_;Vn4kq2czL=S8aY^KZb=6%m+i_ZVyXYm0(3KUnW$3D}P!RFSj)byH40BN|W&{Ara zW#N{>wsVVnV2<_UnwzqFRrtIouoXvZ{; zwE~Agm2o)q<2}!dO+NodU%)tRF7P+{f(h3Pm@a(2Y9# z+Vilwb^N-0_T0InrVPn9WdUsEv~&z^-pjU*yY>8z*HZzPwj``{am6_;opi7gh8A`s z$Z>q7pXe3-dj+&X0`Gw%^LUzb-mjrWD#gc0^zfyr0-%Yvn{rJFUE{+{uSu%smDIp$ zt~4Sy0e0IebX6dBF04qUz*?f3u{bBc1}} z$Us2=7CUlwqWmZnAM?d27Nq}He0&s34kxOKRuj;?w(FxeTdmWApr6#MZ=~(JaX?Ae z(4hR=$26Jn=8Cnnw4U7me(+=raFpCRbQ402s^^~}a7ATN`usEUC?)N!-!u;X?PMXM zxZ{0fzV{D`eqLG%pgdbSqF=qD1gM3$cpP0Y2~dL4B0)F^TH)K~umLevKurkaiz+L@!b6~#V=iPjF2i`MCRYq-o3fG`C(G(G!>3n zz&IC8VX--U?6!H=Dy`T$eM`%)gYA8Y)qx@pZn`mZM*<@xOo9?XEs=t7H0ypk@hg|7+cVGNN*icq4lC&}y zuBAOo+vv$li{(E))pk-zX%up$`H9q(i_@>%HVA5SsAZ+3o~1>L$T9JqZ|)+g3b>K1 zs*%)&pB_5hEQo4!f%osOpu$f~t&+av^(FILXWGTx07DRa$QG`qz0vs3Jegi@WNh3O zq^?6+EDKvAc^{8?axJUu+?4#AV(;f_d*Q7|L|O2t1Sk z+Sg?ihuu2g#uca2oSoaeLXjk_!G$aQ_x1`c1rLH&Ieu`c2{{xdHxmKm03WA^q%))C zLpbo!nI2(RMb}&u0_ao@K@JGh>)PgoJ~-!4z(;8V(ITahNs~{L*^Bg{o=em1qwjwI zJCJd;Ckx>W&--pcV14y_+4h}kAX4BtC61wm0n5!EzhvP z{QSJt{io~8kUV+onG=L+VJ=3BKlPuc&T2c$;qw0Pq}`5 z#mK{PdzU3W=3~F<`6%~vm{!||rcP0Rs>~hv;+)?$(l~gt`_6njHYKwA?yBU+MMobK z*+vF);SNP2qlcbqbY!I5#NdGdtFoE*%MFcvS$Tw=q2gG>M|Yos&hz2r-J+t_nm?P` z6Jle_3{}R_UfO>VesSHg92zGaMbkzR`T0C##4(V#4!Gyx!NG~T`%{)Rr+@}Q_YC0i zlCbKc91)u~rnqU^&+ldFPhO+Q|FovLjc)l;)_QV}) z1fJl0svj(L>IDgTc`nWNT!$ULwYuEcvnnI&1CoiLuuaDN5tum9;xb@I;`E?pWGn;u z7?acXTraw~^R`YB>w@y=H<#M;pRB}h8uzwjRc$|~{XtvxmY&f+G}50xPPz@&=@1)> z|D+g7=wmzef77k2KF z7Hk4`h3(8iQH#_v!H+zqGM3BP z(Jl9V-v###hvtxkwkMZ?r4VFTDf*>^PZyP)dr@lmXIx zTEqeJqM!%Y2KC{wdY5gy$VLrbPa!Q#O5XS-weeco$+v&zTN!Ims!iuWJpHd^;t%(9449(JD6Ptqge+DnKN(8xks9k*`EPqz2I~( zkq8SYOr_zr`-iivaKNSuGFY8k@p!TjHDPXe7yVl(LJUB00o5R?3qXpCuc#1jOz zAR{|x0ACRqGU9drvL+=B%~m0ybr!jkPda{n$jG>*JhEaR2Mzvv2?J`LI7Y81-U!Z4 zLXF^tah)mV`H^%GW`LsN;=Ljw9d+&3&CPprU$A^OqM8A#00nl~v>jCE$ong6m+1^G zICENjg4Mj8Bg|R-k;^rnxjWkjEd#{^JEo7fH+Rpzjg3{X^l=3Ig^B<>;pBr>bHZ;x zvu7vpj85CSARMfcu!glB@Jld9AHkK{`&)B*LlT#t<4=MENDP}lB6q)sT_b^ckr^4R zBtHYQ(->h00FPs+r}q!Gj09$U5C+lLUnOa$2(!wt0NvWPXuPoC>~4wAJmwbHr9Mur zXBOu<_f6VnO1oqvZmsGi-TlKij~E`YloId|{`( z1b_f%#wNGzyP7}S`;N*#Uo)o&(X1ts@b6tsIonv=2f8r zrhZ^5vU^K6E~y-y#@T&!Q!|*D>FMP)*1%~Q?LIL%tMhdV1sw$QrI<=W5_en|8(m8P ziuFk^!5Y?qN9aa9AC$v)74Mx=|Lq!%i4I5$oX!CY z@OqJ-&qz*{JlY|U&08S|n&$f~#s_@l*|hxSrQV&@dEnH6BFo9i<+OxqZyH%_y*P{^ z564k>;0GjMs~04h@aSj>bxlHjh;;>9*$#1HWRJ`&+yWQd;bDF5TwsT|iO=PI!zIS4 zl`fBOq^*&e|Lo!`xm``xrEHPq^6Bso{_UJO_a@Zlzup|&T*}owUi+ffICV`-E(vZ0 zq)d)aGyK(ky3(nUGekxF`RU|dSp;sN-$TDq;+XUHZAI*})hO=>1`mwaV+7$vGd}~$ z-DBb8(|{lZPC&eQsDK~fJjJm=@_lEZYx>b`4J^n1@Dv;TkE_G0T5yP_r`tB$1I&=y z@`wz~;?^47bM6)gYnkV2FR_u1j7>@1SsOM9YVGQ@QMPrLm}#p1YL~VuwmPVj{z%@u zNg|_7_pfE@{eLM%3*Pd{{9BN+LCwJIoU>m3$$^z~gX_(?iun$^>0jrxwObzx)^0x+ zQfct?ORB%W|FlNPb?IwLC|(U==U85-ULH~wX6NE6K_fEuX{$eRivX_&kv3{C2I}ji zJ&}Cm=|4jdUHR}!AbX_P>oL3$& zv6>lIAJrV!waoi06ZZlTj-KWPkzud3sg>Fgm{F`=O?B&oP(4LbVtGt#*dAiOMYR~i zb?c^5NagRBy32Eob_3DDz_&V4(eo^i@sMDt;gmmB2Y<^yK&!Dl%D8+R+i=T)1Gkj8 z?hxNaVBnX5AJ7g^Wyhk4J@n_(R_;MlA~vG44I?Xc!1}U?_6s4w7KgZu8asjk__%S8unIcMMnMkFRGk2+}saK~uDRoSh3=0di53hAy~YrEjVnab4a ztnxNNXz7#7H9vmj^b0VG_B17Frj{C>UgOu@d()eY6epzqONije$DQ$C?tk%h1e7{@ z;OT+s4}ZM9E|yc#&_IYyoBr64tyDPS=UQKj&aI!r%~f;~bw8dA&$(MzBR9b~ZKyji zF5#TG?m*sfVNytxT64*4g$2Lc;-e77mXAt$TUhKYW*Z<*K|9UjQLcHTdto zD(N>q=a`b1$lyAk;X3&H!;S7zdXj8PEEZT{)ayvrjlcA>bsy;&8Rwm+12fv$amwJ7 zd|BVf#?DjNKl8KCp>vLEXi z(bp8vh?^fAw-jh>#bNJ_3PN^b>^QAv-i~BhTFna(!~1~}bexR1oTBj~?l43wpxxFx z@8kWbCqkPjtrUG0d9NS}E_z6Ud ze;i~zWA1MJjhM(3+Ws_2x_FlfLsx0W;VZ*ej~#FN+_C2Zp!qJ3=IJx%rWK}5W!^2U z@vh?h=oll9qB14>Q?nTWNV?lBbM68oH?9s+@RoSVjYL>xuK(bl;cB4CBVr=nK6a; zFfG_6|0X{EBcsdcY5>P(KQh;^bb8Zv*Mv3U4#Q9{3~99g5^nFo8W;VvccHR{DZ za2*H(3vEA+pV93mXW$q0aQz}lw>W3@u|KiGkwdIAQdO-x6WEV(&5Th&o#;8a&}GUw_;LO9VDq=~`V2c03Qib~=yXqiOi zK5Qxm3`NBOWXI`Fq(dwUG=&CrD>B&*FuX40prPeuU9P74Fc@5euQWV{x=b-cuOuZ^&&%HS-;6E(@l6VhIepCDH%CU|b zAf{5__;0utVCtjtX@xmp1D+Pn|q zO=0~LS^Iu+{P~f@b;~y@_tv|J9+>kXr^3MOkwh_zWFa5K>Nocs{cmX<1PMyiKXyE9 zxhWyPgdw-FF4mg z{euR6@>hkCy>#|XVDrf;X7zc+NU3eq9{S}sA6rQY&@HT?dW!@+bo-Vth^%SYsjt~E zD76juGI0tawrMdZtg2kxSH3+QxTrjub4+(Aat!U3$aitgyV1+5l(!(t5GHxII$z2o zWo&Pt>!M_{<8>Tzawx`Cc2@OUO2EQHfl1ezn&n!%ipiKV>;Xin=l2`>GQG=LDHn&p zks_Io2i}$Zg&tvN2ewp=?R8tB<;RDE%baB)GBZD4*Rmu5RUhPA_%G?{4I{hE+iq<7 znj_lYoVL5U<^BjHXrw>P-II8KO8z>aZ{H1>sa>6+wA`Zz~dN8PgAmnnrxFH)4o3I{!?8ja!hOdru^GjU7K z1A|g)Z-L~1M-s#5H#nQ2#*kU5F?RcP|5$9E<>t)oxpvTG|7Pbs^8IuH<@_OQ$!>;& zWb5I>+Li`~d4{+3!8vNAWGcyrj@z9%5~I_=D>7iH2zQbuly(w+TFHZA(tG{X=%d-J zPqAobOMiVpKAB^|{P1|OcT_0PfK14tiPNqnAP{uWna*v=T5@YimcAFc4^ z)}j~ErwWHZBgXd_ToPqdj}tHWpR9y^iM+QXVxQk(s>ksgH{R*d_-4y^dwtNk<(RsU zCw#y2p}6p?=H@J?hDo}r6*3oU%Ib1Sx(d|GJ-G}^ZQL@t#?OPpQGtOy#DO(xtA-{9 zxUx^)Zebqp;?9&fWjj0A#0@A1O|hTxLGp8gJ5%(XnkUxiG%iz{2jpxOLQpBs|?y1URYV@g2h}8PsO7}pW zV|4ga2Dfhe{~94c%(mIu6IM3DpsVmfa>QsBau2&m=N$yPi{FRj{6_m(D3nox-d2h( zf;iGn7qernmKKJ7c?q#3y1#Y`2Z_Ky(s9{Wr;Sf)k9?l&qI-xn21&y|08{gJ(ek~F zSovDW^1!Hc2D~f;7tQ4CvoTrp0%4yoZI-^0ct5_R4TT(HA91~pa_jy|81uaNW)mwb zxCyvnNc0sz7N1@R`+ZoS>Q$Vc12-O&H9lRDceG7&W2Iw!Oifu;?$4j)0XT=ca?uA_ zT@a&TslW;8T=iKPVH@a)0cR2~QM%>u$O!A=CFjmJi$=(ZBh?p%skc?bQZRcsEgqUv z;hP&VB5>_WD$+fmS~X=1d_UWcxlze~Iy?ZSJ=`zHVd)w0HlN1NH?~x-O{e44&eLr_v4hY`)oWb!HbpN{IndrPbGKs+@26Etnpx-9QE^73< z(mJ$!o&+m&Y%qw=NA|yvL>7p^;}GtmgQ|4QdHK?y=A2=80vO4{go?j89M-xAFrN#z zRZ<;a@3=!{{i&e<7#2chYO7_97|E$V?=8PmrUS()SN1v5F!{skzY$FTRujY~j9mt36Z00J-$r?v2c zJgw$BQp0BTH9>b76GN(-q`bLbp}&N&0dDKFeK$+j?E6_2Xu`w7k}l*ECmE*fUs4ZS z1;)ERfYgCF7LszOHWPyfzQ&oPV3{w0Q;(lL6P%mL493xp8XmM1NFzFzYSe1T*Mvn& z@_H2XKQM2&Bia}y6W>N1M|v`t1avzz^#F40Jp@6@Lyz~;)ntYsMED`bsrJqGDMCI# z2S}}-GbwiI;CW-Md}HZEbxbKX6Mx>{?ZG7f`zRI_?W`_H5okXUy3(PYF#cp$_%iS| zlC^p!eUCUYJL$m!(VSJ?M>ZjUf|lZ;OQn^THG zfP`)V+>3;O*T~nHRH*S;^J%Mghv= z8yP!#59*vhFBUhqc_~i^0+(|NfFiDt%Uk~UA2?o+1w_mR(y1TIH}jCJa)u>fyc7pIal>u;NRU5lq2{dR-?#ETU^_v` z4-*SZZ}4ExwXrOw0b;u6uG4v)`?HIv?s0UF>cm3U1X*w8d~VlBjuXOX@codga!M-< zZy35A1%hQT?1XSP;X*e5trL=*43Ll&a-B`&O;mNJhr7t|pU1y;;5!^6Z2%K@;v5}R zQ}B1^Xu0QhR`eln+SQ+E0>M-ip^bV^qm8(?z13}XQo~{&v1R=ys@zMRK}@AvM6u z1n85Rn6#It(T9AQCu>PDahC?SH4+z*#D2`yHocnhK4G2*Y_RZ)z^ul`+t~~5Kt}f+ zpp^c@+jg_~^fUg-L!!jAhFa12=+@`jv_hW=7YzNfM!rj~ZelQ!4xl|(Q1EWA&V>O8 zdnCv8;J$s2F9@(cMO-^Bgf^}tsjbjRfWi$^KG0|Di5Nk^>1q@f^4U?pfBuqB1zWI@ zh2@XmdNlcs86vIc7lx}wsl8|r?$vhln7JmCZr+fe3wf?PDtHSx5^ZC5* z^FGgh_TJAeQVbF!l+IE2cntire0ANMA)t9JgG34$Q}Ci-gwooqx?LPVAw)nM|Ae<5 zSSN9*sd{$pXjSp}`ucJ%UOarKE$?XKLCpLuu(;#s3=37@p|4Inr!V*ucoe?D+(;M~+(FO5*+oXd-rZ_N zQf64bI=>&kX2r7{>na%h)Ka)Hto-WzdGzIJpW73s?d<-1QMw-j9-uQw7FT}#W|&m_ z9sV?!jx)c^-Z9@4l_#P90E_={?q%1w8ge3G()+LwCX)oPrqPnGREec;-PB=~dLi{V z+)%DyC2AW+(4@1ovztbF2Ana^2>-QnZN#vRwsX5nMtXXtbkC^!OgPtD_@c^$l{4KJ z6cns0>k09Rr|7}Mho^LWqlx$JWmQ^)ZRA;g35i2t*R|hUZ>zF0jD%_ds#=8L!e#{; zEF8)RXI)r02(Yp!l5}X&^;ef5DoT_QH3m4I3q*rj^W+Y%7C`s}oL7{y@Lj~>w4;r> z?mh2sVUZylD4Y^YPM3d3-S#ri6bTE8X2F>qashm1%qViM{Fsjn4gkz#>2$t&AD-r9 z_@%6b7n7r3j* z!E8l}0By$-)#K4a0szloKuZFKNgSQ7bq8tpGZnZa!8hT&moAP5xUAsQhWeI9fo6(0 z$hK(FN_lxMtR?)&z;qtGn6YTgMHk^P(H}5_K~vBv*SWFZa75wG*me8X?#Zdka-c|{ z=k7<>MltC)pxX9v^!F2|&p4J(NQ&;pG;vMB}&q z-Oq8)QdTw3AVnot}9E*19V9tT1_sG_NvD zMVLv}5sz~1N+epqTkJfxSEP|WJ#`=MR4tUsjc${8ez-@R+}!?05~I_0cUE4x^ND&7 zJZ9RLRbl0*;n~Puu^SJ^UbnJJ>Y}gDAN=yS9F$Ffo*tNc-N-Uc0SCfTdOxSpHs-E$ zd<-jFNy!_48)#f*)`_*2IHO<|h8iE46j0?Z-XHm*Qc}Vntek~H!kCuK9Wj~UH80oa zhy8SOjO2jz88YUMY*hI7EDk(fSzlqj&Ht+VB-=<>-@HI zz+(i6f?`|Vr^dz*w8~#7s3mY&K}7+%EdhzhD$z-GCLRC!kr=d~#hAfZs>#TwwK76W7jkVh$oK>WS7rK{>glCgSgk|E zDCB@vVBa&790R+YRD+~IXcs4KJ)Rb{oY;T4)@*RheJJbYtS0F4khL@=m3gM%6o7yq z@qS%Y9)|Owu8$ed&Q5j#y#{!PtJ>`kb>g()K4)1x zasGz@ejxR_hLU-v+1V%38Fx0SDNOX7*t~@vT|)c5mBIxWLytW|Ebn4z*BhcAaRYQbXfDjcmva5wbf( z8T4o~rqruMt#wZRDWUYgG^I6 ziWK3`dA-ZmKkCC5Q>9Its?T`r4=GWyoga#ZbhNsM^8syFY+#HAYPFs1uq9W7gX!Cp zel4JLcb9!Jb?And1?h~rd*mvgoS%&P3Nz7VvD**CI~HFu>g! zmV${W5~!#QMmXTvzo@$R$J=QYfY^&#tIP_?Z{;!DrW6m8Iq_V8l<55FU2qpMGRwU_ z6l^~}ftiGeE~XjNo|s`WI9#z&7VhOpqsdwZ?GjRSZfK5h#);LSqGn}dzNoHYrv!VYf?ck&`(Jg1W-7wB?*00j5FUjiT1Vh*CE!xKy3L2I|V_}t% z+}fZq!?6P$nrv=Wm()_YVc1E)c11ZUTLj27N*zE(L~luKqhSpRiG%(D0f1L~Ng->r z3dA{E+VCMnX29=&xjVelHW{N7^Gmvqpa8HPWc|BqlJ2|o_VxW(pLRPeY$1ZyRVjB) zbmzaOoein#mj_e=_=SwSuVyHJmj>$*^^D`U+V6``L!36WC>1aW%G5XZO@4J7@m%>8 zF5F?|jMiUY_>Q|G;^4}^ro6q4hg2&)N0(z!XMS@LBHfb{*|r%EKBBpDb+p8_J4|Fq z=i~mSiPs!Hv%|82cWG$NFIQ;gUg_Qo{YZGe7N^VtX37#$jQO1WQc?po#TE}=@2%Q{ zzzc9Ar=%?gR14BAFWlaba25;HJmS;Xh5E6}SQ0p?_pQ1m-&m7(R#6m=8e}90`A8aK zH_nw#t?`695;|#O-Gk%rbjfug%H^(4;r1WxB>;{X8#nrep1N8jbKDaLB59Ni{IC~t z7&-41PJmgTOle?>YpkXOHRgT^c{=qwZ)(Kpoj(3ek)nF-bI>x;#-<@V+4@O!bWw99!=CxX0`Ui447ywwB!-7WVV!x{#9u2zA zg=4oADz1MsaD*i(gd6Y$)9=}c(-gaubkO1Hhnnr>iA00MqgWqt^z+4Y7#dP!{6%*k z*aQgm5CCF@!eU(ItlVGK7cPrf3OUN%N*D_(m?+se2)iN_;e*bX6O)sJsxOQ*dbqWJ z*cI+Md0s-*kuTQAX%P;iHFHyr>Ek-WDZffY_S(hUS~f2SO|-^(`DLM(2R$;?=B0x* zu}V%Z#5bQ&UFVMwaS$ZxE>DBA*HktSb-_l;8F# z&5)(P?T+rV*2CLDR_-rFTZ;jIKr?OQv`sGs>MJmY9zYAWcO2c!VwQ~F!AaK|^9}@Y0#)P1iZFtc2dg1EI$C}_AAuYw-#}e! zO=BbXjXgy<-w9rX+7pQ!EoKQ6thN^qw^8i@=@;FLn55J<1h`nyb^-6Ftd)(%MI31V`P3N0!;riqpg^l3v9v5& zdQcsTPCs@!4qK=-h-`$`hB_UKGfww$zycmn_)vR+7H*>U79S2}Iw~^~e2}8DoC&TW z>VkR(0%$9y)uwih3r5XtN;;AV4?sKEw}Wr-5F%7)Ea%Uk55cgex%mosqcpcoRt|ym zs>EokF~rqcC{&jw3__Jfj}lC~AL_|WklYQ_s{bGVA0R*ZZ)>ZuL>!a^FnW<#YeBJr zmD)8fBom;(&P=GZEB~wc^bIKIlYm2@d`2UVW}wBv!BLo|z<7TSr32YM2KqYG1ztnfMJLO z;c?_MqzdvFx4{{LbsZ8%^)nQhYCVNTg`!7CJO?Qj-fA(pczbEUqho;aGV6=p8uS4G_~RZB z-F7u&IYPvB=8`*j4YWB(lbN+yRYPWudc20gL1=$Smsa=(0E8A_4k7N3;V2GO0-6>e%0OI^yMvL36W zydf$cOeg@eI$IscqBJu>j(kya#OLAj=O52_loMQt^e)OU4U@g`pw1!65Pi;RNm*L5 zu3FtlyCMpkI+M)L8!F#3pdUXT+1?xv$~-%@O{-w5 zmrJRfP<G#U73!tl`w@tCEzV3aO^P7}GaHy^gZ`f^*oy>|5n7l0<0hAK0-M zzB`1zJno@-u>;Ux^a;evs=}mON$5!Ww&=OwVmbqfH(oZ)#w>(1Li2F@cuNY^G z4R8B25`6b#V((ZDA+kiNYit2GLA$jawC*RTp9b(L@iG^7MZmvRNqmcQdsLH&&#r$C z`X2-=Y%ZRS!S%8LtzhNTscxev%GUVl2K7)&cfa9aL)na|sNI8>QPaMruT*_$+EPu5 zgwFPHTfATPl9UM;eC)!-i0??Iakjnt_)%!a8&zjJp}X^?eLx2kO*szorOL{&N#9&> ztq?60DzMZ2$6E^s6~Ms+c6><5$O*M#FO=Q<{5*kac-YukT&ul>^r zXYnw$50xymg2mC@kQ$D_bPv8UuNXCInu!}+Gx@>=SjGE9yZWukpf1@*@ zhAZ#&7%X$K$@Z~f46K{@RWrH&2Ktli6=}KaUMW;sD<~_~h;8pft8;V2NP9%JSoD)@22r_i=D4eG`xZ9=W+q7LytvJmVf#viG^c8FX56 z$8SJq@ocM-h=733V~v_%Uiv)=@!K1y59T5lZk*}d8a?%bcl3$O_EA@kpha>`7kB%p z)Q0-id*scEgPLkC8kDj500;nB{^Z`f=-{0~eYxE`))nS;kZ_(N)r{xFi>~^+e81ae zH$AQ;&0^p}3{ERu)QQ9v1Xk@HO|{ymHV8Z^TJD@XdQW`7rvOhb!`pFT#*~EX%6Q4c zW=kL46))bLlhRT$mm;t=VzyiKxBMdGqKJ?Xd>f8zP;Na7#Vr(Z*aR2HsYx9>eF|)I ztle$@Dta&@9Mx@dVamaB>d%Tvert~}LE`mtYEOUs(&eR?J)G}sP>UO%{AidQcL_~3 zBpB^6I{{DfES=g>E#2jEDDgDovX1bb>HZY=n?Ao5&33-Aki0gW=H0cG9(P^5I8>VP zrt_?$?hU@XJ3$}<0pibEx9@roDiaWSp$!t4m)X)O>7m~{H#R<`H3o|nt&j@I3s_Ij zXl)5GxsYS0_UilbIwy&WyU*?ozOQi3opauZ=ViCEnf*-33Y_#GFP;RKHnZmOz>XA5 zp?=2saIg0T zAX%LvZ`1@y3F0w(qplLq=I1-t&S}wn>2t3|bRVa;6^+}RzHG4o6#S^^?7@y;ao4$i zQ}Uo5T}^325NXQXL47W6{lZ(_FXe7fYQLWNYq`e3Ru9amQ7M61pzdVDD=QJaQQ~)9 zz_u~tQsW|2BN!fTJYsbKNz*dcGdusk1RL7v5ZW3A1+C-9MaiMMW7JbPar(z2V^@W- zWi*c@5$Svv0YpdHwn;13bK^ok^6UJ48trrLv`N#mxOArbpUnk;s8rj79c#WtOr3VstZr#*`QiSF(Z74UCg~%KZdY7-^mSNWJlO=z18UQ-mpJWR zo-a04v&jmCnWjQcAA4p$DECajStFO}{bp)kkWGz`e*v0yDx*=mAToeY(}tM<@{Noh zezF((Orqol8zFYo--mFoP`KGywZON6r5}36VL`(6`t~6hSfERwUEpoeO^yR|@w%weay;kl_b)GB z-?{h6uW?7SrETXJl;KeNo4?_%mr|h0d{kG1Zx0>si#MWAzl1k5o6Gv&jJOBp)BAN< zXPGxyWqe8)y0QzD9FnOU%lYbp>JR$V3UmWpwkz`Z`}$7a`;tlSxW7ifrem98zNJ`c z*gYGOC*n9w+xFkCz7+dGURpBdjoM^hX4C525W>0u+KiT~-#P&5$3}YhL{h=rK`b49 zA`L7Kbxf$52W?$u@W@=VmwCaqpgEPVOWI#AJzj9XZ)#BMfSTBP{g6$sO+-slpY>j_ z8O+<)b_g(9q2gaH)P;tFLm=XqdZiFjEi22~vwweZSN#p7w~C}Z=ZreHZB*oB{~wGT z#*Wa&XeU)kh|N0HU%*0gsJ>vN4K`F|+=($1ySNY10b;p!ib@+gQP;z}Ov) z!Ny)o3+XP9wSn&Gp+kHe&z*bHRUe|D4pXhKFxX;vmDo!lC1Pik<4KapOzq1!Q^xyk zsIdH==<@uSZ+6)ub>Swe-0?483aG~D45~eV^##@kG9z=Nx;B^hXyo$?3TmsWH@tPz+n6p6P2Za$XjJiGHUYD^vs z)P&l!cD43q)^@(Z$9m@-FaGG!+pG?Z%>X`>TRVW^$7EYXp_keB{=20{Lw&uRtF2P| z!imD&w{c!gRW7<(6r87PQg~jvDo^0LOW}47Ftm+Y>0zS5qa3OJT&9+*Kc>U_!dh&s4}ZejOWq z$L=(JbBrtFxhbs;>)-t6&F^i*P^pEo6k0Ilc`g~qfq!9;3;1_IpiiKjhqV%^voS&v zlP&{Er{vu-W>qX>+D2KbG1IM!m}(D(F%TQ5tMSIO=$<&L z388=eS5XI8h3y2SjBa~Bo6KWaRN##4>b=Kv{2WR&^bt01u9@)y@?z1=x}Pf3g}mNZ zU^Q3PTOMfj-C~Ovpa!hD&iEzm&9lGCcDR&rBB00$2+a-q0Pir=GZDhPkPv?C7Q9to0Wb#5Y zo8>CX?yGyiuCUajpnKFEox{bnGUepZjr-pF*SO`xSZHep8eZh}1Y88}m%`L}9Zs3z z0%n0^0iZ=3SqzbQ$F3F!p$C^ksnOib{c-_xn46wg5(_ip8&aHz`v*|)=uzrK#BZUg zsvb%S(V)V?!C$X}qxWMf1%B5enUAoNItLzs0^r|l{@HZsg0F%*KBgx(L7;U#B0 z-bcX;!~c{hs1phoX4r3&PLtmasK3*{9q0fFXB#np^Pn#W8E)&=^%KWMB_u%fTL^3z z#z|FYvhj8R>%jgkL2xCYj3>+wRBVfb7ETcSVqzFKSAI`(GK)J z&Zp915-l4-BLPdC;fhu?j%#kErD)5-N(Tic&^9p388wt`Q0pbt{>G?oNa8A`tgA5K zKn;+0A<2J+ytj4pCy#}5>k+F9F5$-^cx4hEW7iwyqfN%vsB3_hw6ZH02oE01 z(?{m1hn#g-9xd@>e+Te6@G|4kO}8R@2_!#6ArCo0tQ>JUR;YM;VM`nomZqzZ!Y#tw zC~}-3t$O*|w}ZFX3F!@1DT4zi(4&#UEE}f`9k2)xN8t4D_Donv=oBzpxC{8hTW{v) zDijrptS4`pMVj%j)rqef6&cV89Rx3x#c%=bRq@J_*O^gg`g zZm8;FCKtt#ywnTUOYH(7ov=XI*jC8O7Ihx0#&(1;F^)2rFHt0@D!R$rnaX>3*u?pG z|DZht(ukyru@_FfXw#_B$zTI?v4L7jlzmL3zJ-Gn9|rhF9ME_rvFc*n{!mt0p$EnSY)ND>n%ZT-)_X$wk!Jx+2V$nKk!~8gDr}7h zksYs4Q!^f^y58i0g@%j{^T`0{o~j$4`VW$@{T7;mF)k#GgM_QUOCLd|tCw{R{$LXy zOvK{=#$~gx3f?6a7LU7P`LmS4>m=8Pi^#b5dC}6|u`r0%h?J6uE^_X>7O|S26pAPq z9dSN;kPQj*GB*}~3@~HF0Nk@{eSLi@wPv8z;ASFlY_2mS3sA1LXy4$k9^zqEgh&hzQJVB~85pOI9LbS;7oX3S$35)Jz<$iy0LO z`1Uhv^+`{S6!=@fu(eu)S96;!4dyaDwCSTswO}w0(dhpk7B)Igf|z21L5y~LxZ z;VB;%t0A)iNFsr+^UQ$9;jAQ%5eP~jvZ#LlaSZ>llgA6EFv(Z%;?BJ~kqTc12>H=1 znBIO0^{u1s+W-RxIB>#FP5x@M!dfI2IBk$(3-T<&W&mJYDc?_yagf+?jD!3Z7psgj zJl>y_`kIk!U>C#F6|_LiO`O>7HoOY5)u+v2+VWsJV^-L`+tWm}3e5u9%?;MVGbeFu zD5x_t%CyI*oQdIv4)(G$oM(Xn277x43?k6sz`U!kSCfM|!T-y=@7zbuJ=X321LlUZ zaPuJquC)<6G7>JstOi}JFQ&H?ELp1G9rfZ_o1HYD8_0rohLns%(pYiw{%^3}zXIOB zq?+?iINW3W-wxe$xV$>|eU+J-4qUrEkacZ#LyrT2n)Bn2 zbdMHWfi{3N2ouZ%zCZu);ShAZ5hMfQG}^+7Rz|odB&u_ALSq|LHpPvuDwbaO8J$Q$ zFx9e74y3AGhn54)J5)w+14;~Bi)*>DVo=3rtRhH+pB&D`21i#@@5qsrQyza!1IGg^uL)8rx73P5j~5+fD!pSk8+(XpyCJjZ{{1e#w990c8Gg;svoM3S8(f)dvqAs!W%v&eYo3IH zGcOxvLAbl&;^Y)O`{e(92Wg8u%**pCKKF8_8TQ^W49|q5q~2)^e3OMnvk(nC`=1?$ ztLdwLzcYltP|(J+KT8uAR0lv7ujpAn=d8Ci(w&^0y}wjfZ@Nrou>SW^GC`4_YsB}u gZEvd;`R<3>|YaV{>*VfTW)-?C~KmTJ>)Bpeg diff --git a/keyboards/ergodox_ez/keymaps/bepo/keymap.c b/keyboards/ergodox_ez/keymaps/bepo/keymap.c index dd47357998..7c30d58788 100644 --- a/keyboards/ergodox_ez/keymaps/bepo/keymap.c +++ b/keyboards/ergodox_ez/keymaps/bepo/keymap.c @@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | E_CIRC |A_GRAV| Y | X | . | K | | | | ' | Q | G | H | F | C_CEDIL| * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * |QWERTY| |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' * | | | L_Num| | L_Num| | | * | Space|LShift|------| |------|RShift|Enter | @@ -37,8 +37,8 @@ BP_DOLLAR, BP_DQOT, BP_LGIL, BP_RGIL, BP_LPRN, BP_RPRN, KC_DEL, BP_PERCENT, BP_B, BP_E_ACUTE, BP_P, BP_O, BP_E_GRAVE, KC_BSPC, BP_W, BP_A, BP_U, BP_I, BP_E, BP_COMMA, BP_ECRC, BP_A_GRAVE, BP_Y, BP_X, BP_DOT, BP_K, KC_TAB, -TG(QWER), KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, KC_TRNS, +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + DF(BASE), DF(QWER), MO(NUM), KC_SPC, KC_LSHIFT, MO(FNAV), // Right hand @@ -47,7 +47,7 @@ TG(QWER), KC_NO, KC_LGUI, KC_LCTL, KC_LALT, BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, KC_NUMLOCK, BP_APOS, BP_Q, BP_G, BP_H, BP_F, BP_CCED, BP_ALGR, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -KC_TRNS, KC_INS, +DF(QWER), DF(BASE), MO(NUM), MO(FNAV), KC_RSHIFT, KC_ENTER), /* Keymap 1: QWERTY system compatibility layer @@ -61,7 +61,7 @@ MO(FNAV), KC_RSHIFT, KC_ENTER), * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | e | a | y | x | . | k | | | | ' | q | g | h | f | c | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | BEPO | |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' * | | | L_Num| | L_Num| | | * | Space|LShift|------| |------|RShift|Enter | @@ -74,8 +74,8 @@ KC_DOLLAR, S(KC_QUOT), S(KC_COMM), S(KC_DOT), KC_LPRN, KC_RPRN, KC_DEL, KC_PERCENT, KC_B, KC_E, KC_P, KC_O, KC_E, KC_BSPC, KC_W, KC_A, KC_U, KC_I, KC_E, KC_COMMA, KC_E, KC_A, KC_Y, KC_X, KC_DOT, KC_K, KC_TAB, -KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, KC_TRNS, +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + DF(BASE), DF(QWER), MO(NUM), KC_SPC, MO(SQWER), MO(FNAV), // Right hand @@ -84,7 +84,7 @@ KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, MO(AQWER), KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -KC_TRNS, KC_INS, +DF(QWER), DF(BASE), MO(NUM), MO(FNAV), MO(SQWER), KC_ENTER), /* Keymap 2: QWERTY shifted system compatibility layer @@ -98,7 +98,7 @@ MO(FNAV), MO(SQWER), KC_ENTER), * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | E | A | Y | X | : | K | | | | ? | Q | G | H | F | C | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | BEPO | |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' * | | | L_Num| | L_Num| | | * | Space|LShift|------| |------|RShift|Enter | @@ -111,7 +111,7 @@ KC_HASH, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_GRV, S(KC_B), S(KC_E), S(KC_P), S(KC_O), S(KC_E), KC_TRNS, S(KC_W), S(KC_A), S(KC_U), S(KC_I), S(KC_E), KC_SCOLON, S(KC_E), S(KC_A), S(KC_Y), S(KC_X), KC_COLON, S(KC_K), S(KC_TAB), -KC_TRNS, KC_TRNS, S(KC_LGUI), S(KC_LCTL), S(KC_LALT), +S(KC_ESC), S(KC_INS), S(KC_LGUI), S(KC_LCTL), S(KC_LALT), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -135,7 +135,7 @@ KC_TRNS, KC_TRNS, KC_TRNS), * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | e | \ | { | } | . | ~ | | | | ' | q | g | h | f | c | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | BEPO | |LSuper| LCtrl| LAlt| |Escape| | | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' * | | | L_Num| | L_Num| | | * | _ |LShift|------| |------|RShift|Enter | @@ -148,8 +148,8 @@ KC_DOLLAR, S(KC_QUOT), S(KC_COMM), S(KC_DOT), KC_LBRC, KC_RBRC, KC_DEL, KC_PERCENT, KC_PIPE, KC_E, KC_AMPR, KC_O, KC_E, KC_BSPC, KC_W, KC_A, KC_U, KC_I, RALT(KC_5), KC_COMMA, KC_E, KC_BSLASH, KC_LCBR, KC_RCBR, KC_DOT, KC_TILDE, KC_TAB, -KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, KC_TRNS, +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + KC_TRNS, KC_TRNS, MO(NUM), KC_UNDS, MO(SQWER), MO(FNAV), // Right hand @@ -158,7 +158,7 @@ KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, KC_TRNS, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -KC_TRNS, KC_INS, +KC_TRNS, KC_TRNS, MO(NUM), MO(FNAV), MO(SQWER), KC_ENTER), /* Keymap 4: function / navigation layer diff --git a/keyboards/ergodox_ez/keymaps/bepo/readme.md b/keyboards/ergodox_ez/keymaps/bepo/readme.md index 4a18cd80ff..207b675715 100644 --- a/keyboards/ergodox_ez/keymaps/bepo/readme.md +++ b/keyboards/ergodox_ez/keymaps/bepo/readme.md @@ -27,7 +27,7 @@ Touche de fonction permettant de saisir les touches F1 à F12, les touches F1 à Touche de fonction permettant l'accès au pavé numérique comme sur la TypeMatrix 2030, mais sans avoir à déplacer la main droite : avec les doigts sur la rangée de repos, possibilité de saisir les chiffres "4", "5" et "6" comme sur un pavé numérique classique. Le double "0" de la TypeMatrix a été conservé, et gagne une possibilité de répétition en simples "0". -L'appui sur une touche permet de basculer en mode BEPO sur un système configuré pour un clavier QWERTY. Cette compatibilité n'est pas parfaite (pas encore de gestion des accents mais ça devrait être faisable avec une disposition en qwerty international, et les combinaisons de touches ne sont pas toutes supportées puisque le clavier traduit déjà certaines touches en combinaisons) mais reste pratique pour une saisie de texte occasionnelle. +Touche permettant de basculer en mode BEPO sur un système configuré pour un clavier QWERTY. Cette compatibilité n'est pas parfaite (pas encore de gestion des accents mais ça devrait être faisable avec une disposition en qwerty international, et les combinaisons de touches ne sont pas toutes supportées puisque le clavier traduit déjà certaines touches en combinaisons) mais reste pratique pour une saisie de texte occasionnelle. TODO : couche de compatibilité pour utiliser la disposition BÉPO sur un système configuré pour un clavier AZERTY. From 4cfb262faab653247f4d66d44bf5f3339d82bd36 Mon Sep 17 00:00:00 2001 From: Olivier Date: Mon, 4 Jul 2016 01:10:40 +0200 Subject: [PATCH 005/124] Spellchecking. --- readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/readme.md b/readme.md index c24d951d8d..02207702c4 100644 --- a/readme.md +++ b/readme.md @@ -570,7 +570,7 @@ Enable the backlight from the Makefile. All of these functions are available in the `*_kb()` or `*_user()` variety. `kb` ones should only be used in the `/.c` file, and `user` ones should only be used in the `keymap.c`. The keyboard ones call the user ones - it's necessary to keep these calls to allow the keymap functions to work correctly. -## `void martix_init_*(void)` +## `void matrix_init_*(void)` This function gets called when the matrix is initiated, and can contain start-up code for your keyboard/keymap. From b5172e3afab515b1f93cd09c51b4c6c1b5174dc7 Mon Sep 17 00:00:00 2001 From: Olivier Date: Sat, 20 Aug 2016 18:19:03 +0200 Subject: [PATCH 006/124] Rename file following upstream folder rename. --- keyboards/{ergodox_ez => ergodox}/keymaps/bepo/Makefile | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename keyboards/{ergodox_ez => ergodox}/keymaps/bepo/Makefile (100%) diff --git a/keyboards/ergodox_ez/keymaps/bepo/Makefile b/keyboards/ergodox/keymaps/bepo/Makefile similarity index 100% rename from keyboards/ergodox_ez/keymaps/bepo/Makefile rename to keyboards/ergodox/keymaps/bepo/Makefile From 67dfde765f5bc192aad8a7a7586b10a661ae52d1 Mon Sep 17 00:00:00 2001 From: Didier Chagniot Date: Fri, 9 Sep 2016 21:42:35 +0200 Subject: [PATCH 007/124] typing with it --- .../ergodox/keymaps/dvorak_emacs/keymap.c | 165 ++++++++++++++++++ 1 file changed, 165 insertions(+) create mode 100755 keyboards/ergodox/keymaps/dvorak_emacs/keymap.c diff --git a/keyboards/ergodox/keymaps/dvorak_emacs/keymap.c b/keyboards/ergodox/keymaps/dvorak_emacs/keymap.c new file mode 100755 index 0000000000..4cb11a56f4 --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_emacs/keymap.c @@ -0,0 +1,165 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" + +/****************************************************************************************** + * DVORAK LAYOUT (see http://djelibeibi.unex.es/dvorak/) + * Layer 1: auxiliary keys + * Layer 2: full qwerty layout + *****************************************************************************************/ + +// LAYERS +#define BASE 0 // dvorak layout (default) +#define AUX 1 // auxiliary keys + +// MACROS +/* #define OBRACE 0 // key { or shift */ +/* #define CBRACE 1 // key } or shift */ +/* #define OBRACK 2 // key [ or left alt */ +/* #define CBRACK 3 // key ] or left alt */ +/* #define CAPS 4 // caps lock */ + +// LEDS +#define USB_LED_NUM_LOCK 0 +#define USB_LED_CAPS_LOCK 1 +#define USB_LED_SCROLL_LOCK 2 +#define USB_LED_COMPOSE 3 +#define USB_LED_KANA 4 + +// TIMERS +#define KEY_TAP_FAST 85 +#define KEY_TAP_SLOW 95 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Base layer + * Keys with double values (like Esc/Ctrl) correspond to the 'tapped' key and the 'held' key, respectively + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | Esc | | Esc | 6 | 7 | 8 | 9 | 0 | = / + | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | ~ |" / ' |, / < |. / > | P | Y | [ | | ] | F | G | C | H | L | / / ? | + * |--------+------+------+------+------+------| { | | } |------+------+------+------+------+--------| + * | Tab | A | O | E |U/LSft| I/L1 |------| |------| D/L1|R/RSft| T | N | S | - / _ | + * |--------+------+------+------+------+------| LGUI | | LGUI |------+------+------+------+------+--------| + * | {/LSft |; / : | Q | J | K | X | | | | B | M | W | V | Z | }/RSft | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | ~L1 | | ~L1 | | | \ / || | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | HOME | END | | LEFT | RIGHT| + * ,------|------|------| |------+--------+------. + * | BSPC | DEL | PGUP | | UP | SPACE |RETURN| + * | / | / |------| |------| / | / | + * | LCTL | LALT |PGDWN | | DOWN | LALT | LCTL | + * `--------------------' `----------------------' + * + */ +[BASE] = KEYMAP( + // left hand + KC_NO, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_TILD, KC_QUOTE, KC_COMM,KC_DOT, KC_P, KC_Y, KC_LBRACKET, + KC_TAB, KC_A, KC_O, KC_E, SFT_T(KC_U), LT(AUX, KC_I), + SFT_T(KC_LBRC), KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LGUI, + KC_NO, KC_NO, KC_NO, KC_NO, MO(AUX), + KC_HOME, KC_END, + KC_PGUP, + CTL_T(KC_BSPC), ALT_T(KC_DEL), KC_PGDN, + // right hand + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, + KC_RBRACKET, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLASH, + LT(AUX, KC_D), SFT_T(KC_H), KC_T, KC_N, KC_S, KC_MINUS, + KC_LGUI, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_RBRC), + MO(AUX), KC_NO, KC_NO, KC_BSLASH, KC_NO, + KC_LEFT, KC_RIGHT, + KC_UP, + KC_DOWN, ALT_T(KC_ENT), CTL_T(KC_SPC) + ), +/* Keymap 1: Aux layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | VolUp | | | | | | SLEEP | PWR | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | VolDn | F1 | F2 | F3 | F4 | | | | | | 7 | 8 | 9 | * | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | F5 | F6 | F7 | F8 | TRANS|------| |------|TRANS | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | |PSCR |------+------+------+------+------+--------| + * | TRANS | F9 | F10 | F11 | F12 | | | | | | 1 | 2 | 3 | / | TRANS | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * |CTRL-S|CTRL-Z|CTRL-X|CTRL-C| TRANS| | TRANS| . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | TRANS| TRANS| | TRANS| TRANS| + * ,------|------|------| |------+------+------. + * | | | TRANS| | TRANS| | | + * |TRANS |TRANS |------| |------| TRANS| TRANS| + * | | | TRANS| | TRANS| | | + * `--------------------' `--------------------' + */ +[AUX] = KEYMAP( + // left hand + KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_SLEP, + KC_VOLD, KC_F1, KC_F2, KC_F3, KC_F4, KC_NO, KC_NO, + KC_NO , KC_F5, KC_F6, KC_F7, KC_F8, KC_TRNS, + KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, + LCTL(KC_S), LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), KC_TRNS, + KC_TRNS , KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_PWR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_7, KC_8, KC_9, KC_PAST, KC_NO, + KC_TRNS, KC_4, KC_5, KC_6, KC_PPLS, KC_NO, + KC_PSCR, KC_NO, KC_1, KC_2, KC_3, KC_PSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_PEQL, KC_NO, + KC_TRNS , KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(AUX) // FN1 - Momentary Layer 1 (Aux) +}; + + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } +} From 83b6dd0cd6f055d99d3a11690ccc81b908a0aa4c Mon Sep 17 00:00:00 2001 From: Didier Chagniot Date: Sat, 10 Sep 2016 00:20:21 +0200 Subject: [PATCH 008/124] readme.md updated --- .../ergodox/keymaps/dvorak_emacs/readme.md | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 keyboards/ergodox/keymaps/dvorak_emacs/readme.md diff --git a/keyboards/ergodox/keymaps/dvorak_emacs/readme.md b/keyboards/ergodox/keymaps/dvorak_emacs/readme.md new file mode 100644 index 0000000000..0578f1e257 --- /dev/null +++ b/keyboards/ergodox/keymaps/dvorak_emacs/readme.md @@ -0,0 +1,70 @@ +# Ergodox Dvorak Layout with emacs binding in mind + * Control & Alt key on the thumbs (activated if pressed with another key). + * In the same way, "I" and "R" are the shift modifier if pressed with another key. + * "I" and "D" set the layer 1 for the auxiliary keys if pressed with another key. + * Software layout set to english. + +## Keymap Layers + - L0: dvorak with some customizations (see layout below) + - L1: auxiliary keys (includes function keys, numpad...) + + +### Keymap 0: Base layer +Keys with double values (like U/LSft) correspond to the 'tapped' key and the 'held' key, respectively + +

+
+,--------------------------------------------------.           ,--------------------------------------------------.
+ |        |   1  |   2  |   3  |   4  |   5  |  Esc |           |  Esc |   6  |   7  |   8  |   9  |   0  |   =    |
+ |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ |   ~    |  '   |   ,  |   .  |   P  |   Y  |   [  |           |   ]  |   F  |   G  |   C  |   H  |   L  |   /    |
+ |--------+------+------+------+------+------|   {  |           |   }  |------+------+------+------+------+--------|
+ |  Tab   |   A  |   O  |   E  |U/LSft| I/L1 |------|           |------|  D/L1|R/RSft|   T  |   N  |   S  |   -    |
+ |--------+------+------+------+------+------| LGUI |           | LGUI |------+------+------+------+------+--------|
+ | {/LSft |   ;  |   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | }/RSft |
+ `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+   |      |      |      |      | ~L1  |                                       | ~L1  |      |      |   \  |        |
+   `----------------------------------'                                       `----------------------------------'
+                                        ,-------------.       ,-------------.
+                                        | HOME |  END |       | LEFT | RIGHT|
+                                 ,------|------|------|       |------+--------+------.
+                                 | BSPC |  DEL | PGUP |       |  UP  | SPACE  |RETURN|
+                                 |  /   |  /   |------|       |------|   /    |  /   |
+                                 | LCTL | LALT |PGDWN |       | DOWN | LALT   | LCTL |
+                                 `--------------------'       `----------------------'
+
+
+ +### Keymap 1: Aux layer + +

+
+,--------------------------------------------------.           ,--------------------------------------------------.
+|  VolUp |      |      |      |      |      | SLEEP            | PWR  |      |      |      |      |      |        |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+|  VolDn |  F1  |  F2  |  F3  |  F4  |      |      |           |      |      |   7  |   8  |   9  |   *  |        |
+|--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+|        |  F5  |  F6  |  F7  |  F8  | TRANS|------|           |------|TRANS |   4  |   5  |   6  |   +  |        |
+|--------+------+------+------+------+------|      |           |PSCR  |------+------+------+------+------+--------|
+|  TRANS |  F9  |  F10 |  F11 |  F12 |      |      |           |      |      |   1  |   2  |   3  |   /  |  TRANS |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  |CTRL-S|CTRL-Z|CTRL-X|CTRL-C| TRANS|                                       | TRANS|    . |   0  |   =  |      |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       | TRANS| TRANS|       | TRANS| TRANS|
+                                ,------|------|------|       |------+------+------.
+                                |      |      | TRANS|       | TRANS|      |      |
+                                |TRANS |TRANS |------|       |------| TRANS| TRANS|
+                                |      |      | TRANS|       | TRANS|      |      |
+                                `--------------------'       `--------------------'
+
+
+ + + +## Generation of .hex file +> In the "qmk_firmware/keyboards/ergodox" directory. + +> Execute "make dvorak_emacs". Then the hex file "ergodox_ez_dvorak_emacs.hex" is in the root directory : "qmk_firmware". + +> Flash with `teensy_loader` binary From b8679bbe045a2285d6ab6bbc420121b26f516b9a Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Wed, 5 Oct 2016 20:41:33 -0400 Subject: [PATCH 009/124] RGBW lights --- keyboards/ergodox/config.h | 2 ++ keyboards/ergodox/keymaps/jack/Makefile | 5 +++++ keyboards/ergodox/keymaps/jack/config.h | 14 ++++++++++++++ keyboards/ergodox/keymaps/jack/keymap.c | 4 ++-- quantum/rgblight.c | 18 +++++++++++++++--- quantum/rgblight.h | 1 + 6 files changed, 39 insertions(+), 5 deletions(-) create mode 100644 keyboards/ergodox/keymaps/jack/Makefile create mode 100644 keyboards/ergodox/keymaps/jack/config.h diff --git a/keyboards/ergodox/config.h b/keyboards/ergodox/config.h index edc60caae1..049c707a56 100644 --- a/keyboards/ergodox/config.h +++ b/keyboards/ergodox/config.h @@ -1,6 +1,8 @@ #ifndef KEYBOARDS_ERGODOX_CONFIG_H_ #define KEYBOARDS_ERGODOX_CONFIG_H_ +#include "config_common.h" + #define MOUSEKEY_DELAY 100 #define MOUSEKEY_INTERVAL 20 #define MOUSEKEY_MAX_SPEED 3 diff --git a/keyboards/ergodox/keymaps/jack/Makefile b/keyboards/ergodox/keymaps/jack/Makefile new file mode 100644 index 0000000000..1e57612788 --- /dev/null +++ b/keyboards/ergodox/keymaps/jack/Makefile @@ -0,0 +1,5 @@ +RGBLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergodox/keymaps/jack/config.h b/keyboards/ergodox/keymaps/jack/config.h new file mode 100644 index 0000000000..01ccfb3a2a --- /dev/null +++ b/keyboards/ergodox/keymaps/jack/config.h @@ -0,0 +1,14 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D7 +// #define RGBLIGHT_TIMER +#define RGBLED_NUM 20 // Number of LEDs +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#endif \ No newline at end of file diff --git a/keyboards/ergodox/keymaps/jack/keymap.c b/keyboards/ergodox/keymaps/jack/keymap.c index dda253fa45..1dd5a76187 100644 --- a/keyboards/ergodox/keymaps/jack/keymap.c +++ b/keyboards/ergodox/keymaps/jack/keymap.c @@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_ENT, MO(1), KC_LEFT,KC_DOWN,KC_UP, KC_RGHT, - KC_NO, KC_NO, + RGB_TOG, RGB_HUI, KC_PGUP, KC_PGDN, KC_SPC,KC_SPC ), @@ -90,7 +90,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // Runs just one time when the keyboard initializes. void matrix_init_user(void) { - + }; // Runs constantly in the background, in a loop. diff --git a/quantum/rgblight.c b/quantum/rgblight.c index f82e3ec558..801ca1d0d9 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -50,7 +50,11 @@ const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {100, 50, 20}; rgblight_config_t rgblight_config; rgblight_config_t inmem_config; -struct cRGB led[RGBLED_NUM]; +#ifdef RGBW + struct cRGBW led[RGBLED_NUM]; +#else + struct cRGB led[RGBLED_NUM]; +#endif uint8_t rgblight_inited = 0; @@ -334,14 +338,22 @@ void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) { void rgblight_set(void) { if (rgblight_config.enable) { - ws2812_setleds(led, RGBLED_NUM); + #ifdef RGBW + ws2812_setleds_rgbw(led, RGBLED_NUM); + #else + ws2812_setleds(led, RGBLED_NUM); + #endif } else { for (uint8_t i = 0; i < RGBLED_NUM; i++) { led[i].r = 0; led[i].g = 0; led[i].b = 0; } - ws2812_setleds(led, RGBLED_NUM); + #ifdef RGBW + ws2812_setleds_rgbw(led, RGBLED_NUM); + #else + ws2812_setleds(led, RGBLED_NUM); + #endif } } diff --git a/quantum/rgblight.h b/quantum/rgblight.h index def26c428c..2a712d8be4 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -1,6 +1,7 @@ #ifndef RGBLIGHT_H #define RGBLIGHT_H +#define RGBW 1 #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) #define RGBLIGHT_MODES 23 From 99ca59baf8d508f3221df5dd89158241925aca14 Mon Sep 17 00:00:00 2001 From: cbbrowne Date: Wed, 12 Oct 2016 12:03:54 -0400 Subject: [PATCH 010/124] I keep mis-using UPPER|LOWER/SLASH, and getting RESET. With RESET shifted to the UPPER+LOWER layer, it is now time to change that key to Alt-Slash, which, in Emacs, does automatic word completion --- keyboards/planck/keymaps/cbbrowne/keymap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/keyboards/planck/keymaps/cbbrowne/keymap.c b/keyboards/planck/keymaps/cbbrowne/keymap.c index 7f1601af75..4742ca5c06 100644 --- a/keyboards/planck/keymaps/cbbrowne/keymap.c +++ b/keyboards/planck/keymaps/cbbrowne/keymap.c @@ -94,6 +94,7 @@ enum macro_id { #define SHIFTQUOTE MT(MOD_RSFT, KC_QUOT) #define ALTRIGHT MT(MOD_LALT, KC_RGHT) #define MVERSION M(M_VERSION) +#define ALTSLASH LALT(KC_SLSH) /* Note that Planck has dimensions 4 rows x 12 columns */ @@ -109,13 +110,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RAISE] = { /* RAISE */ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, RESET, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, ALTSLASH,_______}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [_LOWER] = { /* LOWER */ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, RESET, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, ALTSLASH, _______}, {_______, KEYPAD, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, [_KEYPAD] = { /* Key Pad */ From 5f91fb413624781ac79db641549b9e08753c04b5 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sun, 16 Oct 2016 16:03:33 -0400 Subject: [PATCH 011/124] working with power limit --- build_keyboard.mk | 6 ++ keyboards/ergodox/keymaps/jack/config.h | 2 +- keyboards/ergodox/keymaps/jack/keymap.c | 4 +- quantum/keymap.h | 4 + quantum/light_ws2812.c | 137 +++++++++++++++++++++++- quantum/light_ws2812.h | 7 ++ quantum/quantum.c | 3 + quantum/quantum.h | 4 + 8 files changed, 163 insertions(+), 4 deletions(-) diff --git a/build_keyboard.mk b/build_keyboard.mk index 03a69b1464..cd9f44c7bd 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -169,6 +169,12 @@ ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c endif +ifeq ($(strip $(PRINTING_ENABLE)), yes) + OPT_DEFS += -DPRINTING_ENABLE + SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c + SRC += $(TMK_DIR)/protocol/serial_uart.c +endif + ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes) SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC)) OPT_DEFS += $(SERIAL_DEFS) diff --git a/keyboards/ergodox/keymaps/jack/config.h b/keyboards/ergodox/keymaps/jack/config.h index 01ccfb3a2a..f0932084a0 100644 --- a/keyboards/ergodox/keymaps/jack/config.h +++ b/keyboards/ergodox/keymaps/jack/config.h @@ -6,7 +6,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D7 // #define RGBLIGHT_TIMER -#define RGBLED_NUM 20 // Number of LEDs +#define RGBLED_NUM 15 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/ergodox/keymaps/jack/keymap.c b/keyboards/ergodox/keymaps/jack/keymap.c index 1dd5a76187..fabd27a618 100644 --- a/keyboards/ergodox/keymaps/jack/keymap.c +++ b/keyboards/ergodox/keymaps/jack/keymap.c @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_ENT, MO(1), KC_LEFT,KC_DOWN,KC_UP, KC_RGHT, RGB_TOG, RGB_HUI, - KC_PGUP, + RGB_MOD, KC_PGDN, KC_SPC,KC_SPC ), [SYMB] = KEYMAP( @@ -90,7 +90,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // Runs just one time when the keyboard initializes. void matrix_init_user(void) { - + }; // Runs constantly in the background, in a loop. diff --git a/quantum/keymap.h b/quantum/keymap.h index 98ddfd0c53..41aa116228 100644 --- a/quantum/keymap.h +++ b/quantum/keymap.h @@ -174,6 +174,10 @@ enum quantum_keycodes { // Right shift, close paren KC_RSPC, + // Printing + PRINT_ON, + PRINT_OFF, + // always leave at the end SAFE_RANGE }; diff --git a/quantum/light_ws2812.c b/quantum/light_ws2812.c index 401845e855..d38dac4c69 100755 --- a/quantum/light_ws2812.c +++ b/quantum/light_ws2812.c @@ -16,6 +16,122 @@ #include #include "debug.h" +#define RGBW_BB_TWI 1 + +#ifdef RGBW_BB_TWI + +// Port for the I2C +#define I2C_DDR DDRD +#define I2C_PIN PIND +#define I2C_PORT PORTD + +// Pins to be used in the bit banging +#define I2C_CLK 0 +#define I2C_DAT 1 + +#define I2C_DATA_HI()\ +I2C_DDR &= ~ (1 << I2C_DAT);\ +I2C_PORT |= (1 << I2C_DAT); +#define I2C_DATA_LO()\ +I2C_DDR |= (1 << I2C_DAT);\ +I2C_PORT &= ~ (1 << I2C_DAT); + +#define I2C_CLOCK_HI()\ +I2C_DDR &= ~ (1 << I2C_CLK);\ +I2C_PORT |= (1 << I2C_CLK); +#define I2C_CLOCK_LO()\ +I2C_DDR |= (1 << I2C_CLK);\ +I2C_PORT &= ~ (1 << I2C_CLK); + +#define I2C_DELAY 1 + +void I2C_WriteBit(unsigned char c) +{ + if (c > 0) + { + I2C_DATA_HI(); + } + else + { + I2C_DATA_LO(); + } + + I2C_CLOCK_HI(); + _delay_us(I2C_DELAY); + + I2C_CLOCK_LO(); + _delay_us(I2C_DELAY); + + if (c > 0) + { + I2C_DATA_LO(); + } + + _delay_us(I2C_DELAY); +} + +// Inits bitbanging port, must be called before using the functions below +// +void I2C_Init() +{ + I2C_PORT &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK)); + + I2C_CLOCK_HI(); + I2C_DATA_HI(); + + _delay_us(I2C_DELAY); +} + +// Send a START Condition +// +void I2C_Start() +{ + // set both to high at the same time + I2C_DDR &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK)); + _delay_us(I2C_DELAY); + + I2C_DATA_LO(); + _delay_us(I2C_DELAY); + + I2C_CLOCK_LO(); + _delay_us(I2C_DELAY); +} + +// Send a STOP Condition +// +void I2C_Stop() +{ + I2C_CLOCK_HI(); + _delay_us(I2C_DELAY); + + I2C_DATA_HI(); + _delay_us(I2C_DELAY); +} + +// write a byte to the I2C slave device +// +unsigned char I2C_Write(unsigned char c) +{ + for (char i = 0; i < 8; i++) + { + I2C_WriteBit(c & 128); + + c <<= 1; + } + + + I2C_WriteBit(0); + _delay_us(I2C_DELAY); + _delay_us(I2C_DELAY); + + // _delay_us(I2C_DELAY); + //return I2C_ReadBit(); + return 0; +} + + +#endif + // Setleds for standard RGB void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds) { @@ -41,6 +157,25 @@ void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds) _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF); ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF)); + + #ifdef RGBW_BB_TWI + cli(); + TWCR = 0; + I2C_Init(); + I2C_Start(); + I2C_Write(0x84); + uint16_t datlen = leds<<2; + uint8_t curbyte; + uint8_t * data = (uint8_t*)ledarray; + while (datlen--) { + curbyte=*data++; + I2C_Write(curbyte % 0x10); + } + I2C_Stop(); + sei(); + #endif + + _delay_us(80); } @@ -123,7 +258,7 @@ void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi) cli(); while (datlen--) { - curbyte=*data++; + curbyte=(*data++) % 0x10; asm volatile( " ldi %0,8 \n\t" diff --git a/quantum/light_ws2812.h b/quantum/light_ws2812.h index 54eef22d9e..576c3bc483 100755 --- a/quantum/light_ws2812.h +++ b/quantum/light_ws2812.h @@ -16,6 +16,13 @@ #include #include //#include "ws2812_config.h" +#include "i2cmaster.h" + +#define LIGHT_I2C 1 +#define LIGHT_I2C_ADDR 0x84 +#define LIGHT_I2C_ADDR_WRITE ( (LIGHT_I2C_ADDR<<1) | I2C_WRITE ) +#define LIGHT_I2C_ADDR_READ ( (LIGHT_I2C_ADDR<<1) | I2C_READ ) + /* * Structure of the LED array diff --git a/quantum/quantum.c b/quantum/quantum.c index a16bd5443c..5fa5e66b32 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -128,6 +128,9 @@ bool process_record_quantum(keyrecord_t *record) { #endif #ifdef UCIS_ENABLE process_ucis(keycode, record) && + #endif + #ifdef PRINTING_ENABLE + process_printer(keycode, record) && #endif true)) { return false; diff --git a/quantum/quantum.h b/quantum/quantum.h index 0c60466495..06a2e049dc 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -59,6 +59,10 @@ extern uint32_t default_layer_state; #include "process_tap_dance.h" +#ifdef PRINTING_ENABLE + #include "process_printer.h" +#endif + #define SEND_STRING(str) send_string(PSTR(str)) void send_string(const char *str); From a889b899e2cf52b3b7807d8a7ad39f12e0761a10 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sun, 16 Oct 2016 16:03:56 -0400 Subject: [PATCH 012/124] working with power limit --- .../planck/keymaps/thermal_printer/Makefile | 26 ++ .../planck/keymaps/thermal_printer/config.h | 23 ++ .../planck/keymaps/thermal_printer/keymap.c | 314 ++++++++++++++++++ .../planck/keymaps/thermal_printer/readme.md | 2 + quantum/process_keycode/process_printer.c | 254 ++++++++++++++ quantum/process_keycode/process_printer.h | 8 + quantum/process_keycode/process_printer_bb.c | 260 +++++++++++++++ 7 files changed, 887 insertions(+) create mode 100644 keyboards/planck/keymaps/thermal_printer/Makefile create mode 100644 keyboards/planck/keymaps/thermal_printer/config.h create mode 100644 keyboards/planck/keymaps/thermal_printer/keymap.c create mode 100644 keyboards/planck/keymaps/thermal_printer/readme.md create mode 100644 quantum/process_keycode/process_printer.c create mode 100644 quantum/process_keycode/process_printer.h create mode 100644 quantum/process_keycode/process_printer_bb.c diff --git a/keyboards/planck/keymaps/thermal_printer/Makefile b/keyboards/planck/keymaps/thermal_printer/Makefile new file mode 100644 index 0000000000..3d1d11877f --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/Makefile @@ -0,0 +1,26 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +PRINTING_ENABLE = yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/thermal_printer/config.h b/keyboards/planck/keymaps/thermal_printer/config.h new file mode 100644 index 0000000000..430b6493cf --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/config.h @@ -0,0 +1,23 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +# define SERIAL_UART_BAUD 19200 +# define SERIAL_UART_DATA UDR1 +# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +# define SERIAL_UART_RXD_VECT USART1_RX_vect +# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +# define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX */ \ + UCSR1B = _BV(TXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + sei(); \ + } while(0) + + #endif \ No newline at end of file diff --git a/keyboards/planck/keymaps/thermal_printer/keymap.c b/keyboards/planck/keymaps/thermal_printer/keymap.c new file mode 100644 index 0000000000..e880597319 --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/keymap.c @@ -0,0 +1,314 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | Print|no prnt | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, PRINT_ON, PRINT_OFF, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/thermal_printer/readme.md b/keyboards/planck/keymaps/thermal_printer/readme.md new file mode 100644 index 0000000000..de9680b498 --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/quantum/process_keycode/process_printer.c b/quantum/process_keycode/process_printer.c new file mode 100644 index 0000000000..2e11dd366c --- /dev/null +++ b/quantum/process_keycode/process_printer.c @@ -0,0 +1,254 @@ +#include "process_printer.h" +#include "action_util.h" + +bool printing_enabled = false; +uint8_t character_shift = 0; + +void enabled_printing() { + printing_enabled = true; + serial_init(); +} + +void disable_printing() { + printing_enabled = false; +} + +uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0x28, 0x29}; + +// uint8_t keycode_to_ascii[0xFF][2]; + +// keycode_to_ascii[KC_MINS] = {0x2D, 0x5F}; + +void print_char(char c) { + USB_Disable(); + serial_send(c); + USB_Init(); +} + +void print_box_string(uint8_t text[]) { + uint8_t len = strlen(text); + uint8_t out[len * 3 + 8]; + out[0] = 0xDA; + for (uint8_t i = 0; i < len; i++) { + out[i+1] = 0xC4; + } + out[len + 1] = 0xBF; + out[len + 2] = '\n'; + + out[len + 3] = 0xB3; + for (uint8_t i = 0; i < len; i++) { + out[len + 4 + i] = text[i]; + } + out[len * 2 + 4] = 0xB3; + out[len * 2 + 5] = '\n'; + + + out[len * 2 + 6] = 0xC0; + for (uint8_t i = 0; i < len; i++) { + out[len * 2 + 7 + i] = 0xC4; + } + out[len * 3 + 7] = 0xD9; + out[len * 3 + 8] = '\n'; + + print_string(out); +} + +void print_string(char c[]) { + for(uint8_t i = 0; i < strlen(c); i++) + print_char(c[i]); +} + +bool process_printer(uint16_t keycode, keyrecord_t *record) { + if (keycode == PRINT_ON) { + enabled_printing(); + return false; + } + if (keycode == PRINT_OFF) { + disable_printing(); + return false; + } + + if (printing_enabled) { + switch(keycode) { + case KC_EXLM ... KC_RPRN: + case KC_UNDS: + case KC_PLUS: + case KC_LCBR: + case KC_RCBR: + case KC_PIPE: + case KC_TILD: + keycode &= 0xFF; + case KC_LSFT: + case KC_RSFT: + if (record->event.pressed) { + character_shift++; + } else { + character_shift--; + } + return false; + break; + } + + switch(keycode) { + case KC_F1: + if (record->event.pressed) { + print_box_string("This is a line of text!"); + } + return false; + case KC_ESC: + if (record->event.pressed) { + print_char(0x1B); + } + return false; + break; + case KC_SPC: + if (record->event.pressed) { + print_char(0x20); + } + return false; + break; + case KC_A ... KC_Z: + if (record->event.pressed) { + if (character_shift) { + print_char(0x41 + (keycode - KC_A)); + } else { + print_char(0x61 + (keycode - KC_A)); + } + } + return false; + break; + case KC_1 ... KC_0: + if (record->event.pressed) { + if (character_shift) { + print_char(shifted_numbers[keycode - KC_1]); + } else { + print_char(0x30 + ((keycode - KC_1 + 1) % 10)); + } + } + return false; + break; + case KC_ENT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x0C); + } else { + print_char(0x0A); + } + } + return false; + break; + case KC_BSPC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x18); + } else { + print_char(0x1A); + } + } + return false; + break; + case KC_DOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3E); + } else { + print_char(0x2E); + } + } + return false; + break; + case KC_COMM: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3C); + } else { + print_char(0x2C); + } + } + return false; + break; + case KC_SLSH: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3F); + } else { + print_char(0x2F); + } + } + return false; + break; + case KC_QUOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x22); + } else { + print_char(0x27); + } + } + return false; + break; + case KC_GRV: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7E); + } else { + print_char(0x60); + } + } + return false; + break; + case KC_MINS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x5F); + } else { + print_char(0x2D); + } + } + return false; + break; + case KC_EQL: + if (record->event.pressed) { + if (character_shift) { + print_char(0x2B); + } else { + print_char(0x3D); + } + } + return false; + break; + case KC_LBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7B); + } else { + print_char(0x5B); + } + } + return false; + break; + case KC_RBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7D); + } else { + print_char(0x5D); + } + } + return false; + break; + case KC_BSLS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7C); + } else { + print_char(0x5C); + } + } + return false; + break; + } + } + return true; + +} \ No newline at end of file diff --git a/quantum/process_keycode/process_printer.h b/quantum/process_keycode/process_printer.h new file mode 100644 index 0000000000..fdd36d75a8 --- /dev/null +++ b/quantum/process_keycode/process_printer.h @@ -0,0 +1,8 @@ +#ifndef PROCESS_PRINTER_H +#define PROCESS_PRINTER_H + +#include "quantum.h" + +#include "protocol/serial.h" + +#endif \ No newline at end of file diff --git a/quantum/process_keycode/process_printer_bb.c b/quantum/process_keycode/process_printer_bb.c new file mode 100644 index 0000000000..1924d03774 --- /dev/null +++ b/quantum/process_keycode/process_printer_bb.c @@ -0,0 +1,260 @@ +#include "process_printer.h" +#include "action_util.h" + +bool printing_enabled = false; +uint8_t character_shift = 0; + +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_MASK _BV(PD3) +#define SERIAL_DELAY 52 + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + + +void enabled_printing() { + printing_enabled = true; + serial_output(); + serial_high(); +} + +void disable_printing() { + printing_enabled = false; +} + +uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0x28, 0x29}; + +// uint8_t keycode_to_ascii[0xFF][2]; + +// keycode_to_ascii[KC_MINS] = {0x2D, 0x5F}; + +void print_char(char c) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(c & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +void print_string(char c[]) { + for(uint8_t i = 0; i < strlen(c); i++) + print_char(c[i]); +} + +bool process_printer(uint16_t keycode, keyrecord_t *record) { + if (keycode == PRINT_ON) { + enabled_printing(); + return false; + } + if (keycode == PRINT_OFF) { + disable_printing(); + return false; + } + + if (printing_enabled) { + switch(keycode) { + case KC_EXLM ... KC_RPRN: + case KC_UNDS: + case KC_PLUS: + case KC_LCBR: + case KC_RCBR: + case KC_PIPE: + case KC_TILD: + keycode &= 0xFF; + case KC_LSFT: + case KC_RSFT: + if (record->event.pressed) { + character_shift++; + } else { + character_shift--; + } + return false; + break; + } + + switch(keycode) { + case KC_F1: + if (record->event.pressed) { + print_string("This is a line of text!\n\n\n"); + } + return false; + case KC_ESC: + if (record->event.pressed) { + print_char(0x1B); + } + return false; + break; + case KC_SPC: + if (record->event.pressed) { + print_char(0x20); + } + return false; + break; + case KC_A ... KC_Z: + if (record->event.pressed) { + if (character_shift) { + print_char(0x41 + (keycode - KC_A)); + } else { + print_char(0x61 + (keycode - KC_A)); + } + } + return false; + break; + case KC_1 ... KC_0: + if (record->event.pressed) { + if (character_shift) { + print_char(shifted_numbers[keycode - KC_1]); + } else { + print_char(0x30 + ((keycode - KC_1 + 1) % 10)); + } + } + return false; + break; + case KC_ENT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x0C); + } else { + print_char(0x0A); + } + } + return false; + break; + case KC_BSPC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x18); + } else { + print_char(0x1A); + } + } + return false; + break; + case KC_DOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3E); + } else { + print_char(0x2E); + } + } + return false; + break; + case KC_COMM: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3C); + } else { + print_char(0x2C); + } + } + return false; + break; + case KC_SLSH: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3F); + } else { + print_char(0x2F); + } + } + return false; + break; + case KC_QUOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x22); + } else { + print_char(0x27); + } + } + return false; + break; + case KC_GRV: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7E); + } else { + print_char(0x60); + } + } + return false; + break; + case KC_MINS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x5F); + } else { + print_char(0x2D); + } + } + return false; + break; + case KC_EQL: + if (record->event.pressed) { + if (character_shift) { + print_char(0x2B); + } else { + print_char(0x3D); + } + } + return false; + break; + case KC_LBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7B); + } else { + print_char(0x5B); + } + } + return false; + break; + case KC_RBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7D); + } else { + print_char(0x5D); + } + } + return false; + break; + case KC_BSLS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7C); + } else { + print_char(0x5C); + } + } + return false; + break; + } + } + return true; + +} \ No newline at end of file From b2bc215934ddd31315db4304223750aee3eaf38d Mon Sep 17 00:00:00 2001 From: Seth Chandler Date: Sun, 13 Nov 2016 00:42:07 -0500 Subject: [PATCH 013/124] add sethbc keymap for gh60 and update macro expansion in connection with same --- keyboards/gh60/gh60.h | 32 ++++++----- keyboards/gh60/keymaps/sethbc/Makefile | 3 + keyboards/gh60/keymaps/sethbc/keymap.c | 76 ++++++++++++++++++++++++++ 3 files changed, 96 insertions(+), 15 deletions(-) create mode 100644 keyboards/gh60/keymaps/sethbc/Makefile create mode 100644 keyboards/gh60/keymaps/sethbc/keymap.c diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h index 82624b6148..899f7dc6a3 100644 --- a/keyboards/gh60/gh60.h +++ b/keyboards/gh60/gh60.h @@ -4,7 +4,7 @@ #include "quantum.h" #include "led.h" -/* GH60 LEDs +/* GH60 LEDs * GPIO pads * 0 F7 WASD LEDs * 1 F6 ESC LED @@ -49,13 +49,13 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ - K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \ - K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \ -) +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D }, \ + { KC_##K30, KC_NO, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_NO, KC_##K3D }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ +} #define KEYMAP_HHKB( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\ @@ -63,12 +63,14 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ - K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ -) +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D }, \ + { KC_##K30, KC_NO, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ +} + + #endif diff --git a/keyboards/gh60/keymaps/sethbc/Makefile b/keyboards/gh60/keymaps/sethbc/Makefile new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/keyboards/gh60/keymaps/sethbc/Makefile @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/gh60/keymaps/sethbc/keymap.c b/keyboards/gh60/keymaps/sethbc/keymap.c new file mode 100644 index 0000000000..85a46a29bd --- /dev/null +++ b/keyboards/gh60/keymaps/sethbc/keymap.c @@ -0,0 +1,76 @@ +#include "gh60.h" +#include "action_layer.h" + +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + KEYMAP_HHKB( + FN0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS, GRV, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ + LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ + LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT, FN1, \ + LCTL,LALT,LGUI, SPC, RGUI,RALT,APP, RCTL), + /* 1: fn */ + KEYMAP_HHKB( + GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ + CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,UP,TRNS,TRNS, \ + TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RIGHT,PENT, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END,PGDN,DOWN,TRNS,TRNS, \ + TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS), +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), + [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + +} + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} From e9f748751808de2f1e85cf7fb670d78773bd5e76 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sun, 13 Nov 2016 23:02:38 -0500 Subject: [PATCH 014/124] mostly working --- keyboards/ergodox/ez/ez.c | 10 ++- keyboards/ergodox/ez/matrix.c | 2 +- keyboards/ergodox/keymaps/jack/Makefile | 1 + keyboards/ergodox/keymaps/jack/config.h | 4 +- quantum/light_ws2812.c | 21 +++-- quantum/light_ws2812.h | 14 +++- quantum/quantum.c | 1 + quantum/rgblight.c | 101 ++++++++++++------------ quantum/rgblight.h | 10 ++- tmk_core/protocol/lufa/lufa.c | 33 +++++++- 10 files changed, 125 insertions(+), 72 deletions(-) diff --git a/keyboards/ergodox/ez/ez.c b/keyboards/ergodox/ez/ez.c index ddb8ff0cf7..039e4c6bb1 100644 --- a/keyboards/ergodox/ez/ez.c +++ b/keyboards/ergodox/ez/ez.c @@ -16,10 +16,10 @@ void matrix_init_kb(void) { // unused pins - C7, D4, D5, D7, E6 // set as input with internal pull-ip enabled DDRC &= ~(1<<7); - DDRD &= ~(1<<7 | 1<<5 | 1<<4); + DDRD &= ~(1<<5 | 1<<4); DDRE &= ~(1<<6); PORTC |= (1<<7); - PORTD |= (1<<7 | 1<<5 | 1<<4); + PORTD |= (1<<5 | 1<<4); PORTE |= (1<<6); ergodox_blink_all_leds(); @@ -51,6 +51,10 @@ uint8_t init_mcp23018(void) { mcp23018_status = 0x20; // I2C subsystem + + uint8_t sreg_prev; + sreg_prev=SREG; + cli(); if (i2c_initialized == 0) { i2c_init(); // on pins D(1,0) i2c_initialized++; @@ -79,6 +83,8 @@ uint8_t init_mcp23018(void) { out: i2c_stop(); + SREG=sreg_prev; + return mcp23018_status; } diff --git a/keyboards/ergodox/ez/matrix.c b/keyboards/ergodox/ez/matrix.c index a19bab90b2..43f5152591 100644 --- a/keyboards/ergodox/ez/matrix.c +++ b/keyboards/ergodox/ez/matrix.c @@ -121,7 +121,7 @@ void matrix_init(void) matrix_scan_count = 0; #endif - matrix_init_kb(); + matrix_init_quantum(); } diff --git a/keyboards/ergodox/keymaps/jack/Makefile b/keyboards/ergodox/keymaps/jack/Makefile index 1e57612788..7c257af501 100644 --- a/keyboards/ergodox/keymaps/jack/Makefile +++ b/keyboards/ergodox/keymaps/jack/Makefile @@ -1,4 +1,5 @@ RGBLIGHT_ENABLE = yes +MIDI_ENABLE = yes ifndef QUANTUM_DIR include ../../../../Makefile diff --git a/keyboards/ergodox/keymaps/jack/config.h b/keyboards/ergodox/keymaps/jack/config.h index 1781563b84..5bf109c184 100644 --- a/keyboards/ergodox/keymaps/jack/config.h +++ b/keyboards/ergodox/keymaps/jack/config.h @@ -5,10 +5,12 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D7 -// #define RGBLIGHT_TIMER +#define RGBLIGHT_TIMER #define RGBLED_NUM 15 // Number of LEDs #define RGBLIGHT_HUE_STEP 12 #define RGBLIGHT_SAT_STEP 255 #define RGBLIGHT_VAL_STEP 12 +#define RGB_MIDI + #endif \ No newline at end of file diff --git a/quantum/light_ws2812.c b/quantum/light_ws2812.c index 497543339b..6edbc0f2bd 100755 --- a/quantum/light_ws2812.c +++ b/quantum/light_ws2812.c @@ -133,13 +133,13 @@ unsigned char I2C_Write(unsigned char c) #endif // Setleds for standard RGB -void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds) +void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF)); } -void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pinmask) +void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) { // ws2812_DDRREG |= pinmask; // Enable DDR // new universal format (DDR) @@ -150,12 +150,15 @@ void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pin } // Setleds for SK6812RGBW -void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds) +void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds) { #ifdef RGBW_BB_TWI + uint8_t sreg_prev, twcr_prev; + sreg_prev=SREG; + twcr_prev=TWCR; cli(); - TWCR = 0; + TWCR &= ~(1<> 8) & 0xff; - OCR3AL = RGBLED_TIMER_TOP & 0xff; - SREG = sreg; + // static uint8_t rgblight_timer_is_init = 0; + // if (rgblight_timer_is_init) { + // return; + // } + // rgblight_timer_is_init = 1; + // /* Timer 3 setup */ + // TCCR3B = _BV(WGM32) // CTC mode OCR3A as TOP + // | _BV(CS30); // Clock selelct: clk/1 + // /* Set TOP value */ + // uint8_t sreg = SREG; + // cli(); + // OCR3AH = (RGBLED_TIMER_TOP >> 8) & 0xff; + // OCR3AL = RGBLED_TIMER_TOP & 0xff; + // SREG = sreg; + + rgblight_timer_enabled = true; } void rgblight_timer_enable(void) { - TIMSK3 |= _BV(OCIE3A); + rgblight_timer_enabled = true; dprintf("TIMER3 enabled.\n"); } void rgblight_timer_disable(void) { - TIMSK3 &= ~_BV(OCIE3A); + rgblight_timer_enabled = false; dprintf("TIMER3 disabled.\n"); } void rgblight_timer_toggle(void) { - TIMSK3 ^= _BV(OCIE3A); + rgblight_timer_enabled ^= rgblight_timer_enabled; dprintf("TIMER3 toggled.\n"); } -ISR(TIMER3_COMPA_vect) { - // mode = 1, static light, do nothing here - if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { - // mode = 2 to 5, breathing mode - rgblight_effect_breathing(rgblight_config.mode - 2); - } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) { - // mode = 6 to 8, rainbow mood mod - rgblight_effect_rainbow_mood(rgblight_config.mode - 6); - } else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) { - // mode = 9 to 14, rainbow swirl mode - rgblight_effect_rainbow_swirl(rgblight_config.mode - 9); - } else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) { - // mode = 15 to 20, snake mode - rgblight_effect_snake(rgblight_config.mode - 15); - } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { - // mode = 21 to 23, knight mode - rgblight_effect_knight(rgblight_config.mode - 21); +void rgblight_task(void) { + if (rgblight_timer_enabled) { + // mode = 1, static light, do nothing here + if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { + // mode = 2 to 5, breathing mode + rgblight_effect_breathing(rgblight_config.mode - 2); + } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) { + // mode = 6 to 8, rainbow mood mod + rgblight_effect_rainbow_mood(rgblight_config.mode - 6); + } else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) { + // mode = 9 to 14, rainbow swirl mode + rgblight_effect_rainbow_swirl(rgblight_config.mode - 9); + } else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) { + // mode = 15 to 20, snake mode + rgblight_effect_snake(rgblight_config.mode - 15); + } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { + // mode = 21 to 23, knight mode + rgblight_effect_knight(rgblight_config.mode - 21); + } } } @@ -461,7 +462,7 @@ void rgblight_effect_rainbow_swirl(uint8_t interval) { last_timer = timer_read(); for (i = 0; i < RGBLED_NUM; i++) { hue = (360 / RGBLED_NUM * i + current_hue) % 360; - sethsv(hue, rgblight_config.sat, rgblight_config.val, &led[i]); + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); } rgblight_set(); @@ -498,7 +499,7 @@ void rgblight_effect_snake(uint8_t interval) { k = k + RGBLED_NUM; } if (i == k) { - sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), &led[i]); + sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), (LED_TYPE *)&led[i]); } } } @@ -518,7 +519,7 @@ void rgblight_effect_knight(uint8_t interval) { static uint16_t last_timer = 0; uint8_t i, j, cur; int8_t k; - struct cRGB preled[RGBLED_NUM]; + LED_TYPE preled[RGBLED_NUM]; static int8_t increment = -1; if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) { return; @@ -537,7 +538,7 @@ void rgblight_effect_knight(uint8_t interval) { k = RGBLED_NUM - 1; } if (i == k) { - sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, &preled[i]); + sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&preled[i]); } } } diff --git a/quantum/rgblight.h b/quantum/rgblight.h index efc685f312..d16ba24e53 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -1,8 +1,6 @@ #ifndef RGBLIGHT_H #define RGBLIGHT_H -#define RGBW 1 - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) #define RGBLIGHT_MODES 23 #else @@ -35,6 +33,7 @@ #endif #define RGBLED_TIMER_TOP F_CPU/(256*64) +// #define RGBLED_TIMER_TOP 0xFF10 #include #include @@ -79,10 +78,13 @@ void eeconfig_update_rgblight(uint32_t val); void eeconfig_update_rgblight_default(void); void eeconfig_debug_rgblight(void); -void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1); -void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1); +void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); +void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1); void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val); + +void rgblight_task(void); + void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 01c0e45b0b..fe466f6047 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -71,6 +71,10 @@ #include "virtser.h" #endif +#ifdef RGB_MIDI + #include "rgblight.h" +#endif + uint8_t keyboard_idle = 0; /* 0: Boot Protocol, 1: Report Protocol(default) */ uint8_t keyboard_protocol = 1; @@ -1045,6 +1049,10 @@ int main(void) #endif keyboard_task(); +#ifdef RGBLIGHT_ENABLE + rgblight_task(); +#endif + #ifdef VIRTSER_ENABLE virtser_task(); CDC_Device_USBTask(&cdc_device); @@ -1077,15 +1085,34 @@ void fallthrough_callback(MidiDevice * device, #endif } +#ifdef RGB_MIDI + rgblight_config_t rgblight_config; +#endif + void cc_callback(MidiDevice * device, uint8_t chan, uint8_t num, uint8_t val) { //sending it back on the next channel - midi_send_cc(device, (chan + 1) % 16, num, val); + // midi_send_cc(device, (chan + 1) % 16, num, val); + #ifdef RGB_MIDI + rgblight_config.raw = eeconfig_read_rgblight(); + switch (num) { + case 14: + rgblight_config.hue = val * 360 / 127; + break; + case 15: + rgblight_config.sat = val << 1; + break; + case 16: + rgblight_config.val = val << 1; + break; + } + rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val); + #endif } void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { - for (int i = 0; i < length; i++) - midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); + // for (int i = 0; i < length; i++) + // midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); } #endif From 702405f0391463cc5d0c8c8109304ac8d0ec844a Mon Sep 17 00:00:00 2001 From: Noah Andrews Date: Mon, 14 Nov 2016 10:03:18 -0500 Subject: [PATCH 015/124] Recommend WSL on Windows 10 At this point, I consider the batch scripts @IBNobody and I worked on to mostly be a failure. They've proven to be unreliable, too dependent on the environment they're being run in, and I've seen far too many examples of people having frustrating issues with them that I haven't been able to help them with. They can also produce misleading and confusing error messages. I've been pointing people to use the WSL for a while now. Eventually, I think we should make a proper replacement for the batch scripts, possibly with an environment in msys2. For now, the WSL method in Windows 10 is far more reliable, and is easy to set up. I also cleaned up some things in the WSL instructions themselves. --- readme.md | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/readme.md b/readme.md index d5a259ccb8..4eed2c776b 100644 --- a/readme.md +++ b/readme.md @@ -45,19 +45,19 @@ Before you are able to compile, you'll need to install an environment for AVR de ### Windows 10 -It's still recommended to use the method for Vista and later below. The reason for this is that the Windows 10 Subsystem for Linux lacks [USB support](https://wpdev.uservoice.com/forums/266908-command-prompt-console-bash-on-ubuntu-on-windo/suggestions/13355724-unable-to-access-usb-devices-from-bash), so it's not possible to flash the firmware to the keyboard. Please add your vote to the link! +Due to some issues with the "Windows (Vista and later)" instructions below, we now recommend following these instructions if you use Windows, which will allow you to use the Windows Subsystem for Linux to compile the firmware. If you are not using Windows 10 with the Anniversary Update installed (which came out in July 2016), you will need to use one of the other methods, such as Docker, Vagrant, or the instructions for Vista and later. -That said, it's still possible to use it for compilation. And recommended, if you need to compile much, since it's much faster than at least Cygwin (which is also supported, but currently lacking documentation). I haven't tried the method below, so I'm unable to tell. +If you use this method, you will need to use a standalone tool to flash the firmware to the keyboard after you compile it. We recommend the official [QMK Firmware Flasher](https://github.com/jackhumbert/qmk_firmware_flasher/releases). This is because the Windows 10 Subsystem for Linux lacks [libUSB support](https://wpdev.uservoice.com/forums/266908-command-prompt-console-bash-on-ubuntu-on-windo/suggestions/13355724-unable-to-access-usb-devices-from-bash), so it can't access the keyboard's microcontroller. Please add your vote for Microsoft to fix this issue using the link! Here are the steps 1. Install the Windows 10 subsystem for Linux, following [these instructions](http://www.howtogeek.com/249966/how-to-install-and-use-the-linux-bash-shell-on-windows-10/). -2. If you have previously cloned the repository using the normal Git bash, you will need to clean up the line endings. If you have cloned it after 20th of August 2016, you are likely fine. To clean up the line endings do the following - 1. Make sure that you have no changes you haven't committed by running `git status`, if you do commit them first - 2. From within the Git bash run `git rm --cached -r .` - 3. Followed by `git reset --hard` -3. Start the "Bash On Ubuntu On Windows" from the start menu -4. With the bash open, navigate to your Git checkout. The harddisk can be accessed from `/mnt` for example `/mnt/c` for the `c:\` drive. +2. If you have cloned the repository using git before August 20, 2016, clean up the line endings from wherever you currently access git: + 1. Make sure that you have no changes you haven't committed by running `git status`. ANY UNCOMMITTED CHANGES WILL BE PERMANENTLY LOST. + 2. Run `git rm --cached -r .` + 3. Run `git reset --hard` +3. Open "Bash On Ubuntu On Windows" from the start menu +4. With the bash window open, navigate to your copy of the [qmk_firmware repository](https://github.com/jackhumbert/qmk_firmware) using the `cd` command. The harddisks can be accessed from `/mnt/`. For example, your main hard drive (C:) can be accessed by executiing the command `cd /mnt/c`. If your username is John and the qmk_firmware folder is in your Downloads folder, you can move to it with the command `cd /mnt/c/Users/John/Downloads/qmk_firmware`. You can use the Tab key as you go to help you autocomplete the folder names. 5. Run `sudo util/install_dependencies.sh`. 6. After a while the installation will finish, and you are good to go @@ -1305,4 +1305,4 @@ This will add a traced variable named "layer" (the name is just for your informa In order to actually detect changes to the variables you should call `VERIFY_TRACED_VARIABLES` around the code that you think that modifies the variable. If a variable is modified it will tell you between which two `VERIFY_TRACED_VARIABLES` calls the modification happened. You can then add more calls to track it down further. I don't recommend spamming the codebase with calls. It's better to start with a few, and then keep adding them in a binary search fashion. You can also delete the ones you don't need, as each call need to store the file name and line number in the ROM, so you can run out of memory if you add too many calls. -Also remember to delete all the tracing code ones you have found the bug, as you wouldn't want to create a pull request with tracing code. \ No newline at end of file +Also remember to delete all the tracing code ones you have found the bug, as you wouldn't want to create a pull request with tracing code. From 530dd3377e4d409a7ca2fee7e47b60b735ebc0fa Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Tue, 15 Nov 2016 13:18:10 -0500 Subject: [PATCH 016/124] animations, midi, etc --- quantum/light_ws2812.c | 1 - tmk_core/protocol/lufa/lufa.c | 5 +++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/quantum/light_ws2812.c b/quantum/light_ws2812.c index 6edbc0f2bd..aac058f534 100755 --- a/quantum/light_ws2812.c +++ b/quantum/light_ws2812.c @@ -171,7 +171,6 @@ void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds) } I2C_Stop(); SREG=sreg_prev; - // TWCR = (1< Date: Wed, 16 Nov 2016 23:52:36 -0500 Subject: [PATCH 017/124] Adding Support for atreus62 keyboard. https://github.com/profet23/atreus62 --- keyboards/atreus62/Makefile | 3 + keyboards/atreus62/atreus62.c | 1 + keyboards/atreus62/atreus62.h | 26 ++ keyboards/atreus62/config.h | 83 +++++ keyboards/atreus62/keymaps/default/keymap.c | 71 ++++ keyboards/atreus62/pro_micro.h | 362 ++++++++++++++++++++ keyboards/atreus62/rules.mk | 66 ++++ 7 files changed, 612 insertions(+) create mode 100644 keyboards/atreus62/Makefile create mode 100644 keyboards/atreus62/atreus62.c create mode 100644 keyboards/atreus62/atreus62.h create mode 100644 keyboards/atreus62/config.h create mode 100644 keyboards/atreus62/keymaps/default/keymap.c create mode 100644 keyboards/atreus62/pro_micro.h create mode 100644 keyboards/atreus62/rules.mk diff --git a/keyboards/atreus62/Makefile b/keyboards/atreus62/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/atreus62/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/atreus62/atreus62.c b/keyboards/atreus62/atreus62.c new file mode 100644 index 0000000000..ba5bce9899 --- /dev/null +++ b/keyboards/atreus62/atreus62.c @@ -0,0 +1 @@ +#include "atreus62.h" \ No newline at end of file diff --git a/keyboards/atreus62/atreus62.h b/keyboards/atreus62/atreus62.h new file mode 100644 index 0000000000..eacf5b4513 --- /dev/null +++ b/keyboards/atreus62/atreus62.h @@ -0,0 +1,26 @@ +#ifndef ATREUS62_H +#define ATREUS62_H + +#include "quantum.h" + +void promicro_bootloader_jmp(bool program); + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, KC_NO, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, KC_NO, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, KC_NO, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k46, k36, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b, k4c, k4d } \ +} + +#endif \ No newline at end of file diff --git a/keyboards/atreus62/config.h b/keyboards/atreus62/config.h new file mode 100644 index 0000000000..90a4aa05a6 --- /dev/null +++ b/keyboards/atreus62/config.h @@ -0,0 +1,83 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6062 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Profet +#define PRODUCT Atreus62 +#define DESCRIPTION q.m.k. keyboard firmware for Atreus62 + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 5 +#define MATRIX_COLS 13 + +// wiring of each half +#define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 } + +#define CATERINA_BOOTLOADER + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/atreus62/keymaps/default/keymap.c b/keyboards/atreus62/keymaps/default/keymap.c new file mode 100644 index 0000000000..52802c77b7 --- /dev/null +++ b/keyboards/atreus62/keymaps/default/keymap.c @@ -0,0 +1,71 @@ +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, + +#include "atreus62.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DEFAULT 0 +#define _NAV 1 +#define _RESET 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_DEFAULT] = { /* qwerty */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS }, + { KC_BSLS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RBRC }, + { KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_TRNS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DELT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LBRC }, + { KC_LCTL, KC_LGUI, KC_LALT, KC_GRV, MO(_NAV),KC_BSPC, KC_ENT, KC_SPC, KC_EQL, KC_MINS, KC_QUOT, KC_ENT, KC_RGUI } +}, + +[_NAV] = { + { TO(_DEFAULT), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11 }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS }, + { TO(_RESET), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS } +}, + +[_RESET] = { + { TO(_DEFAULT), KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, + { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, + { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, + { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO }, + { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , RESET } +} + + +/* +[_TRNS] = { + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS }, + { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS } +}, +*/ +}; + + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch (id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } + else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atreus62/pro_micro.h b/keyboards/atreus62/pro_micro.h new file mode 100644 index 0000000000..f9e7ed75d9 --- /dev/null +++ b/keyboards/atreus62/pro_micro.h @@ -0,0 +1,362 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0 PORTD |= (1<<5) +#define TXLED1 PORTD &= ~(1<<5) +#define RXLED0 PORTB |= (1<<0) +#define RXLED1 PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24; // D4 +static const uint8_t ADC7 = 25; // D6 +static const uint8_t ADC8 = 26; // D8 +static const uint8_t ADC9 = 27; // D9 +static const uint8_t ADC10 = 28; // D10 +static const uint8_t ADC11 = 29; // D12 + +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +// __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0 PD2 RXD1/INT2 +// D1 PD3 TXD1/INT3 +// D2 PD1 SDA SDA/INT1 +// D3# PD0 PWM8/SCL OC0B/SCL/INT0 +// D4 A6 PD4 ADC8 +// D5# PC6 ??? OC3A/#OC4A +// D6# A7 PD7 FastPWM #OC4D/ADC10 +// D7 PE6 INT6/AIN0 +// +// D8 A8 PB4 ADC11/PCINT4 +// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 +// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 +// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 +// D12 A11 PD6 T1/#OC4D/ADC9 +// D13# PC7 PWM10 CLK0/OC4A +// +// A0 D18 PF7 ADC7 +// A1 D19 PF6 ADC6 +// A2 D20 PF5 ADC5 +// A3 D21 PF4 ADC4 +// A4 D22 PF1 ADC1 +// A5 D23 PF0 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO D14 PB3 MISO,PCINT3 +// SCK D15 PB1 SCK,PCINT1 +// MOSI D16 PB2 MOSI,PCINT2 +// SS D17 PB0 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED D24 PD5 XCK1 +// RXLED D17 PB0 +// HWB PE2 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + TIMER0B, /* 3 */ + NOT_ON_TIMER, + TIMER3A, /* 5 */ + TIMER4D, /* 6 */ + NOT_ON_TIMER, + + NOT_ON_TIMER, + TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ + + NOT_ON_TIMER, + TIMER4A, /* 13 */ + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* Pins_Arduino_h */ diff --git a/keyboards/atreus62/rules.mk b/keyboards/atreus62/rules.mk new file mode 100644 index 0000000000..f5d0be23ac --- /dev/null +++ b/keyboards/atreus62/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +#BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +#MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= yes # Unicode +#BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend From 6c5fce5c1a9d6383843416e0a236c2d7ea9cc2da Mon Sep 17 00:00:00 2001 From: Benjamin Grabkowitz Date: Wed, 16 Nov 2016 23:59:42 -0500 Subject: [PATCH 018/124] Adding readme placeholder --- keyboards/atreus62/readme.md | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 keyboards/atreus62/readme.md diff --git a/keyboards/atreus62/readme.md b/keyboards/atreus62/readme.md new file mode 100644 index 0000000000..0245b4f9f0 --- /dev/null +++ b/keyboards/atreus62/readme.md @@ -0,0 +1,10 @@ +atreus62 keyboard firmware +====================== + +This firmware is for the atreus62 keyboard. + +This version utilizes a Pro Micro for its controller and has a 62 key layout. + +https://github.com/profet23/atreus62 + +TODO: More information \ No newline at end of file From 3774a7fcdab5544fc787f4c200be05fcd417e31f Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Thu, 17 Nov 2016 17:42:14 -0500 Subject: [PATCH 019/124] rgb light through midi --- keyboards/amj60/config.h | 2 +- keyboards/clueboard/rev1/config.h | 2 +- keyboards/clueboard/rev2/config.h | 2 +- keyboards/cluecard/config.h | 2 +- .../cluecard/keymaps/rgb_effects/config.h | 2 +- keyboards/cluepad/config.h | 2 +- keyboards/ergodox/keymaps/jack/config.h | 3 +- keyboards/gh60/keymaps/robotmaxtron/config.h | 2 +- .../handwired/minorca/keymaps/rgb/config.h | 2 +- keyboards/jd40/config.h | 2 +- keyboards/kc60/keymaps/ws2812/config.h | 2 +- keyboards/lets_split/config.h | 2 +- keyboards/lets_split/keymaps/i2c/config.h | 2 +- keyboards/lets_split/keymaps/serial/config.h | 2 +- keyboards/phantom/config.h | 2 +- .../planck/keymaps/experimental/config.h | 2 +- keyboards/planck/keymaps/yang/config.h | 2 +- keyboards/preonic/config.h | 2 +- keyboards/preonic/keymaps/kinesis/config.h | 2 +- keyboards/satan/config.h | 2 +- keyboards/tada68/config.h | 2 +- quantum/light_ws2812.c | 2 - quantum/rgblight.c | 10 +- quantum/rgblight.h | 2 +- readme.md | 4 +- tmk_core/protocol/lufa/lufa.c | 96 +++++++++++++++++++ 26 files changed, 126 insertions(+), 31 deletions(-) diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h index d98e0e9f2f..7c06f9a6c7 100644 --- a/keyboards/amj60/config.h +++ b/keyboards/amj60/config.h @@ -67,7 +67,7 @@ along with this program. If not, see . */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/clueboard/rev1/config.h b/keyboards/clueboard/rev1/config.h index 8c94972324..f40876ffbf 100644 --- a/keyboards/clueboard/rev1/config.h +++ b/keyboards/clueboard/rev1/config.h @@ -26,7 +26,7 @@ /* Underlight configuration */ #define RGB_DI_PIN B2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard/rev2/config.h index 15ca4ece86..8435fd02be 100644 --- a/keyboards/clueboard/rev2/config.h +++ b/keyboards/clueboard/rev2/config.h @@ -30,7 +30,7 @@ /* Underlight configuration */ #define RGB_DI_PIN D7 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/cluecard/config.h b/keyboards/cluecard/config.h index 765347b131..6520eb5574 100644 --- a/keyboards/cluecard/config.h +++ b/keyboards/cluecard/config.h @@ -140,7 +140,7 @@ along with this program. If not, see . /* Underlight configuration */ #define RGB_DI_PIN E6 -//#define RGBLIGHT_TIMER +//#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 4 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/cluecard/keymaps/rgb_effects/config.h b/keyboards/cluecard/keymaps/rgb_effects/config.h index e88847df4d..c6c9342c81 100644 --- a/keyboards/cluecard/keymaps/rgb_effects/config.h +++ b/keyboards/cluecard/keymaps/rgb_effects/config.h @@ -4,7 +4,7 @@ #include "../../config.h" // place overrides here -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_EFFECT_SNAKE_LENGTH 3 #define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2 diff --git a/keyboards/cluepad/config.h b/keyboards/cluepad/config.h index bae05fade3..bd64dfd27d 100644 --- a/keyboards/cluepad/config.h +++ b/keyboards/cluepad/config.h @@ -70,7 +70,7 @@ along with this program. If not, see . /* Underlight configuration */ #define RGB_DI_PIN F6 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 4 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/ergodox/keymaps/jack/config.h b/keyboards/ergodox/keymaps/jack/config.h index 5bf109c184..5c11652264 100644 --- a/keyboards/ergodox/keymaps/jack/config.h +++ b/keyboards/ergodox/keymaps/jack/config.h @@ -5,12 +5,13 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D7 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 15 // Number of LEDs #define RGBLIGHT_HUE_STEP 12 #define RGBLIGHT_SAT_STEP 255 #define RGBLIGHT_VAL_STEP 12 #define RGB_MIDI +#define RGBW_BB_TWI #endif \ No newline at end of file diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h index 6a29e6b8c2..bcd7534617 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/config.h +++ b/keyboards/gh60/keymaps/robotmaxtron/config.h @@ -182,7 +182,7 @@ along with this program. If not, see . #define ws2812_pin PF4 */ #define RGB_DI_PIN F4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/handwired/minorca/keymaps/rgb/config.h b/keyboards/handwired/minorca/keymaps/rgb/config.h index deaac2e26f..43b3c59110 100644 --- a/keyboards/handwired/minorca/keymaps/rgb/config.h +++ b/keyboards/handwired/minorca/keymaps/rgb/config.h @@ -11,7 +11,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D5 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 13 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/jd40/config.h b/keyboards/jd40/config.h index e2594f4b37..047be5707b 100644 --- a/keyboards/jd40/config.h +++ b/keyboards/jd40/config.h @@ -70,7 +70,7 @@ along with this program. If not, see . ) #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 12 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/kc60/keymaps/ws2812/config.h b/keyboards/kc60/keymaps/ws2812/config.h index 2f39ea8e55..43abf6228e 100644 --- a/keyboards/kc60/keymaps/ws2812/config.h +++ b/keyboards/kc60/keymaps/ws2812/config.h @@ -2,7 +2,7 @@ /* WS2812B RGB Underglow LED */ #define RGB_DI_PIN F5 // Based on wiring depicted in ws2812_wiring.jpg -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index f4d900accb..b0ad522fcb 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/lets_split/keymaps/i2c/config.h b/keyboards/lets_split/keymaps/i2c/config.h index 2671fabf6d..72e5ae66ba 100644 --- a/keyboards/lets_split/keymaps/i2c/config.h +++ b/keyboards/lets_split/keymaps/i2c/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h index f4d900accb..b0ad522fcb 100644 --- a/keyboards/lets_split/keymaps/serial/config.h +++ b/keyboards/lets_split/keymaps/serial/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h index 983a1d73f2..71a33498b4 100644 --- a/keyboards/phantom/config.h +++ b/keyboards/phantom/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . /* Underlight configuration */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 20 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/keymaps/experimental/config.h b/keyboards/planck/keymaps/experimental/config.h index 52acd1905e..cc093bee49 100644 --- a/keyboards/planck/keymaps/experimental/config.h +++ b/keyboards/planck/keymaps/experimental/config.h @@ -9,7 +9,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN B1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/keymaps/yang/config.h b/keyboards/planck/keymaps/yang/config.h index feb5a11901..4ed19d76f9 100644 --- a/keyboards/planck/keymaps/yang/config.h +++ b/keyboards/planck/keymaps/yang/config.h @@ -5,7 +5,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h index 3fb978c2f6..f88acf2111 100644 --- a/keyboards/preonic/config.h +++ b/keyboards/preonic/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/preonic/keymaps/kinesis/config.h b/keyboards/preonic/keymaps/kinesis/config.h index 086baa84ff..e6099ceb82 100644 --- a/keyboards/preonic/keymaps/kinesis/config.h +++ b/keyboards/preonic/keymaps/kinesis/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/satan/config.h b/keyboards/satan/config.h index 7e9f91cc82..eb357b39e0 100644 --- a/keyboards/satan/config.h +++ b/keyboards/satan/config.h @@ -67,7 +67,7 @@ along with this program. If not, see . */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h index 5d8757936d..19cf9c9b39 100644 --- a/keyboards/tada68/config.h +++ b/keyboards/tada68/config.h @@ -67,7 +67,7 @@ along with this program. If not, see . */ /*#define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 2 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/quantum/light_ws2812.c b/quantum/light_ws2812.c index aac058f534..a883b13884 100755 --- a/quantum/light_ws2812.c +++ b/quantum/light_ws2812.c @@ -16,8 +16,6 @@ #include #include "debug.h" -#define RGBW_BB_TWI 1 - #ifdef RGBW_BB_TWI // Port for the I2C diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 1901010bf9..6b58f66547 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -174,7 +174,7 @@ void rgblight_init(void) { } eeconfig_debug_rgblight(); // display current eeprom values - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_init(); // setup the timer #endif @@ -221,7 +221,7 @@ void rgblight_mode(uint8_t mode) { eeconfig_update_rgblight(rgblight_config.raw); xprintf("rgblight mode: %u\n", rgblight_config.mode); if (rgblight_config.mode == 1) { - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_disable(); #endif } else if (rgblight_config.mode >= 2 && rgblight_config.mode <= 23) { @@ -231,7 +231,7 @@ void rgblight_mode(uint8_t mode) { // MODE 15-20, snake // MODE 21-23, knight - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_enable(); #endif } @@ -245,7 +245,7 @@ void rgblight_toggle(void) { if (rgblight_config.enable) { rgblight_mode(rgblight_config.mode); } else { - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_disable(); #endif _delay_ms(50); @@ -371,7 +371,7 @@ void rgblight_set(void) { } } -#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) +#ifdef RGBLIGHT_ANIMATIONS // Animation timer -- AVR Timer3 void rgblight_timer_init(void) { diff --git a/quantum/rgblight.h b/quantum/rgblight.h index d16ba24e53..330c2fe1ba 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -1,7 +1,7 @@ #ifndef RGBLIGHT_H #define RGBLIGHT_H -#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) +#ifdef RGBLIGHT_ANIMATIONS #define RGBLIGHT_MODES 23 #else #define RGBLIGHT_MODES 1 diff --git a/readme.md b/readme.md index d5a259ccb8..2364b53010 100644 --- a/readme.md +++ b/readme.md @@ -1135,12 +1135,12 @@ For this mod, you need an unused pin wiring to DI of WS2812 strip. After wiring RGBLIGHT_ENABLE = yes -In order to use the underglow timer functions, you need to have `#define RGBLIGHT_TIMER` in your `config.h`, and have audio disabled (`AUDIO_ENABLE = no` in your Makefile). +In order to use the underglow animation functions, you need to have `#define RGBLIGHT_ANIMATIONS` in your `config.h`. Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default: #define RGB_DI_PIN F4 // The pin your RGB strip is wired to - #define RGBLIGHT_TIMER // Require for fancier stuff (not compatible with audio) + #define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index b628cde370..7eb9be601e 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -51,6 +51,7 @@ #include "descriptor.h" #include "lufa.h" +#include "quantum.h" #ifdef NKRO_ENABLE #include "keycode_config.h" @@ -1111,9 +1112,104 @@ void cc_callback(MidiDevice * device, #endif } +void send_dword(uint32_t number) { + uint16_t word = (number >> 16); + send_word(word); + send_word(number & 0xFFFFUL); +} + +void send_word(uint16_t number) { + uint8_t byte = number >> 8; + send_byte(byte); + send_byte(number & 0xFF); +} + +void send_byte(uint8_t number) { + uint8_t nibble = number >> 4; + send_nibble(nibble); + send_nibble(number & 0xF); +} + +void send_nibble(uint8_t number) { + switch (number) { + case 0: + register_code(KC_0); + unregister_code(KC_0); + break; + case 1 ... 9: + register_code(KC_1 + (number - 1)); + unregister_code(KC_1 + (number - 1)); + break; + case 0xA ... 0xF: + register_code(KC_A + (number - 0xA)); + unregister_code(KC_A + (number - 0xA)); + break; + } +} + +uint8_t midi_buffer[16] = {0}; + void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { // for (int i = 0; i < length; i++) // midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); + // if (start == 0x27) { + // SEND_STRING("\n"); + // send_word(start); + // SEND_STRING(": "); + for (uint8_t place = 0; place < length; place++) { + // send_byte(*data); + midi_buffer[start + place] = *data; + if (*data == 0xF7) + sysex_buffer_callback(start + place, &midi_buffer); + // SEND_STRING(" "); + data++; + } + // } + +} + +void sysex_buffer_callback(uint8_t length, uint8_t * data) { + uint8_t * pointer_copy = data; + + if (*data++ != 0xF0) + return + data++; + data++; + data++; + data++; + + switch (*data++) { + case 0x27: ; // RGB LED functions + switch (*data++) + case 0x00: ; // Update HSV + uint32_t part1 = *data++; + uint32_t part2 = *data++; + uint32_t part3 = *data++; + uint32_t part4 = *data++; + uint32_t part5 = *data++; + uint32_t chunk = ((part1 & 0x1FUL) << 28) | (part2 << 21) | (part3 << 14) | (part4 << 7) | part5; + // SEND_STRING("\nCHUNK: "); + // send_dword(chunk); + rgblight_sethsv(((chunk >> 16) & 0xFFFF) % 360, (chunk >> 8) & 0xFF, chunk & 0xFF); + // SEND_STRING("\nHUE: "); + // send_word(((chunk >> 16) & 0xFFFF) % 360); + // SEND_STRING("\nSAT: "); + // send_word((chunk >> 8) & 0xFF); + // SEND_STRING("\nVAL: "); + // send_word(chunk & 0xFF); + break; + case 0x01: ; // Update RGB + break; + break; + } + + // SEND_STRING("\nDATA:\n"); + // while (*pointer_copy != 0xF7) { + // send_byte(*pointer_copy++); + // SEND_STRING(" "); + // } + } + #endif From 9bbc9a7ce024edb4d80ce65d43c82456e3714928 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Thu, 17 Nov 2016 19:47:08 -0500 Subject: [PATCH 020/124] Initial Erez Experimental keymap tweaks --- keyboards/ergodox/keymaps/erez_experimental/Makefile | 2 ++ keyboards/ergodox/keymaps/erez_experimental/config.h | 11 +++++++++++ keyboards/ergodox/keymaps/erez_experimental/keymap.c | 12 ++++++------ 3 files changed, 19 insertions(+), 6 deletions(-) diff --git a/keyboards/ergodox/keymaps/erez_experimental/Makefile b/keyboards/ergodox/keymaps/erez_experimental/Makefile index b673c5ce52..dbe89d1410 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/Makefile +++ b/keyboards/ergodox/keymaps/erez_experimental/Makefile @@ -3,6 +3,8 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend COMMAND_ENABLE = no # Commands for debug and configuration +RGBLIGHT_ENABLE = yes +MIDI_ENABLE = yes ifndef QUANTUM_DIR include ../../../../Makefile diff --git a/keyboards/ergodox/keymaps/erez_experimental/config.h b/keyboards/ergodox/keymaps/erez_experimental/config.h index e5d7fe1885..fbd12ab797 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/config.h +++ b/keyboards/ergodox/keymaps/erez_experimental/config.h @@ -8,5 +8,16 @@ #undef LEADER_TIMEOUT #define LEADER_TIMEOUT 300 + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 15 // Number of LEDs +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 255 +#define RGBLIGHT_VAL_STEP 12 + +#define RGB_MIDI +#define RGBW_BB_TWI #endif diff --git a/keyboards/ergodox/keymaps/erez_experimental/keymap.c b/keyboards/ergodox/keymaps/erez_experimental/keymap.c index 4804959d63..b867d36013 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/keymap.c +++ b/keyboards/ergodox/keymaps/erez_experimental/keymap.c @@ -67,9 +67,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-------------. ,-------------. * | | | | | | * ,------|------|------| |------+------+------. - * | | | | | | | | + * |VAI |VAD |HUI | |SAI |TOG |MOD | * | | |------| |------| | | - * | | | | | | | | + * | | |HUD | |SAD | | | * `--------------------' `--------------------' */ // SYMBOLS @@ -81,8 +81,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,LCTL(KC_PGUP), LCTL(KC_PGDN), KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, + RGB_HUI, + RGB_VAI,RGB_VAD,RGB_HUD, // right hand KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, @@ -90,8 +90,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_PIPE, KC_AT, KC_EQL, KC_PERC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS + RGB_SAI, + RGB_SAD, RGB_TOG, RGB_MOD ), /* Keymap 2: Media and mouse keys * From 285c5a91f23e972d9c579184283443111186329d Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Thu, 17 Nov 2016 20:56:36 -0500 Subject: [PATCH 021/124] Groundwork for dedicated color keycodes --- .../keymaps/erez_experimental/keymap.c | 24 ++++++++++++++++++- quantum/rgblight.c | 7 ++++++ quantum/rgblight.h | 1 + 3 files changed, 31 insertions(+), 1 deletion(-) diff --git a/keyboards/ergodox/keymaps/erez_experimental/keymap.c b/keyboards/ergodox/keymaps/erez_experimental/keymap.c index b867d36013..4a23c7ac58 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/keymap.c +++ b/keyboards/ergodox/keymaps/erez_experimental/keymap.c @@ -7,6 +7,12 @@ #define SYMB 1 // symbols #define MDIA 2 // media keys +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + RGB_FF00BB // always start with RGB_ +}; + + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Basic layer * @@ -75,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // SYMBOLS [SYMB] = KEYMAP( // left hand - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + RGB_FF00BB, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, @@ -152,6 +158,22 @@ void matrix_init_user(void) { }; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case RGB_FF00BB: + if (record->event.pressed) { + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(0xff,0x00,0xbb); + } + return false; + break; + } + return true; +} + LEADER_EXTERNS(); // Runs constantly in the background, in a loop. diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 6b58f66547..00620da58e 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -253,6 +253,13 @@ void rgblight_toggle(void) { } } +void rgblight_enable(void) { + rgblight_config.enable = 1; + eeconfig_update_rgblight(rgblight_config.raw); + xprintf("rgblight enable: rgblight_config.enable = %u\n", rgblight_config.enable); + rgblight_mode(rgblight_config.mode); +} + void rgblight_increase_hue(void) { uint16_t hue; diff --git a/quantum/rgblight.h b/quantum/rgblight.h index 330c2fe1ba..a3673348e7 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -61,6 +61,7 @@ void rgblight_init(void); void rgblight_increase(void); void rgblight_decrease(void); void rgblight_toggle(void); +void rgblight_enable(void); void rgblight_step(void); void rgblight_mode(uint8_t mode); void rgblight_set(void); From 161bd5596b5d8199f2e56246a27ccbdb8c80bb36 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 18 Nov 2016 22:22:24 -0500 Subject: [PATCH 022/124] midi back and forth --- keyboards/ergodox/keymaps/jack/keymap.c | 7 ++- tmk_core/protocol/lufa/lufa.c | 62 ++++++++++++++++++------- tmk_core/protocol/lufa/lufa.h | 1 + 3 files changed, 52 insertions(+), 18 deletions(-) diff --git a/keyboards/ergodox/keymaps/jack/keymap.c b/keyboards/ergodox/keymaps/jack/keymap.c index 8721b9644a..eb41f12127 100644 --- a/keyboards/ergodox/keymaps/jack/keymap.c +++ b/keyboards/ergodox/keymaps/jack/keymap.c @@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(1), KC_LEFT,KC_DOWN,KC_UP, KC_RGHT, RGB_TOG, RGB_HUI, RGB_MOD, - KC_PGDN, KC_SPC,KC_SPC + M(2), KC_SPC,KC_SPC ), [SYMB] = KEYMAP( // left hand @@ -89,6 +89,11 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) eeconfig_init(); } break; + case 2: + if (record->event.pressed) { // For resetting EEPROM + send_unicode_midi(0x0CA0); + } + break; } return MACRO_NONE; }; diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 7eb9be601e..ae9cc2f962 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -1161,7 +1161,7 @@ void sysex_callback(MidiDevice * device, // send_byte(*data); midi_buffer[start + place] = *data; if (*data == 0xF7) - sysex_buffer_callback(start + place, &midi_buffer); + sysex_buffer_callback(device, start + place, &midi_buffer); // SEND_STRING(" "); data++; } @@ -1169,7 +1169,24 @@ void sysex_callback(MidiDevice * device, } -void sysex_buffer_callback(uint8_t length, uint8_t * data) { +uint32_t decode_4byte_chunk(uint8_t * data) { + uint32_t part1 = *data++; + uint32_t part2 = *data++; + uint32_t part3 = *data++; + uint32_t part4 = *data++; + uint32_t part5 = *data++; + return ((part1 & 0x1FUL) << 28) | (part2 << 21) | (part3 << 14) | (part4 << 7) | part5; +} + +void encode_4byte_chunk(uint32_t data, uint8_t * pointer) { + *pointer++ = (data >> 28) & 0x7F; + *pointer++ = (data >> 21) & 0x7F; + *pointer++ = (data >> 14) & 0x7F; + *pointer++ = (data >> 7) & 0x7F; + *pointer++ = (data) & 0x7F; +} + +void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) { uint8_t * pointer_copy = data; if (*data++ != 0xF0) @@ -1180,28 +1197,31 @@ void sysex_buffer_callback(uint8_t length, uint8_t * data) { data++; switch (*data++) { + case 0x13: ; // Get info from keyboard + switch (*data++) { + case 0x00: ; // Get layer state + // send_dword(layer_state); + uint8_t chunk[5]; + encode_4byte_chunk(layer_state | default_layer_state, &chunk); + + uint8_t array[] = {0xF0, 0x00, 0x00, 0x00, 0x00, chunk[0], chunk[1], chunk[2], chunk[3], chunk[4], 0xF7}; + midi_send_array(&midi_device, 11, &array); + // midi_send_data(device, 3, 0x00, layer_state >> 24 & 0x7f, layer_state >> 16 & 0x7f); + // midi_send_data(device, 6, layer_state >> 8 & 0x7f, layer_state & 0x7f, 0xF7); + break; + } + #ifdef RGBLIGHT_ENABLE case 0x27: ; // RGB LED functions - switch (*data++) + switch (*data++) { case 0x00: ; // Update HSV - uint32_t part1 = *data++; - uint32_t part2 = *data++; - uint32_t part3 = *data++; - uint32_t part4 = *data++; - uint32_t part5 = *data++; - uint32_t chunk = ((part1 & 0x1FUL) << 28) | (part2 << 21) | (part3 << 14) | (part4 << 7) | part5; - // SEND_STRING("\nCHUNK: "); - // send_dword(chunk); + uint32_t chunk = decode_4byte_chunk(data); rgblight_sethsv(((chunk >> 16) & 0xFFFF) % 360, (chunk >> 8) & 0xFF, chunk & 0xFF); - // SEND_STRING("\nHUE: "); - // send_word(((chunk >> 16) & 0xFFFF) % 360); - // SEND_STRING("\nSAT: "); - // send_word((chunk >> 8) & 0xFF); - // SEND_STRING("\nVAL: "); - // send_word(chunk & 0xFF); break; case 0x01: ; // Update RGB break; + } break; + #endif } // SEND_STRING("\nDATA:\n"); @@ -1212,4 +1232,12 @@ void sysex_buffer_callback(uint8_t length, uint8_t * data) { } +void send_unicode_midi(uint32_t unicode) { + uint8_t chunk[5]; + encode_4byte_chunk(unicode, &chunk); + + uint8_t array[] = {0xF0, 0x00, 0x00, 0x00, 0x05, chunk[0], chunk[1], chunk[2], chunk[3], chunk[4], 0xF7}; + midi_send_array(&midi_device, 11, &array); +} + #endif diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h index aad08d6407..3fec797b6c 100644 --- a/tmk_core/protocol/lufa/lufa.h +++ b/tmk_core/protocol/lufa/lufa.h @@ -70,6 +70,7 @@ typedef struct { #ifdef MIDI_ENABLE void MIDI_Task(void); MidiDevice midi_device; +void send_unicode_midi(uint32_t unicode); #endif // #if LUFA_VERSION_INTEGER < 0x120730 From 01736a502e8f2900bde229a086a4ab03513f6781 Mon Sep 17 00:00:00 2001 From: climbalima Date: Fri, 18 Nov 2016 23:40:34 -0500 Subject: [PATCH 023/124] just saving --- keyboards/maxipad/Makefile | 2 +- keyboards/maxipad/config.h | 113 ++++---------------- keyboards/maxipad/keymaps/default/Makefile | 21 ---- keyboards/maxipad/keymaps/default/config.h | 8 -- keyboards/maxipad/keymaps/default/keymap.c | 40 ++----- keyboards/maxipad/keymaps/default/readme.md | 1 - keyboards/maxipad/maxipad.c | 29 +---- keyboards/maxipad/maxipad.h | 12 +-- keyboards/maxipad/readme.md | 31 ++---- keyboards/maxipad/rules.mk | 29 ++--- 10 files changed, 54 insertions(+), 232 deletions(-) delete mode 100644 keyboards/maxipad/keymaps/default/Makefile delete mode 100644 keyboards/maxipad/keymaps/default/config.h delete mode 100644 keyboards/maxipad/keymaps/default/readme.md diff --git a/keyboards/maxipad/Makefile b/keyboards/maxipad/Makefile index 57b2ef62e5..4e2a6f00fd 100644 --- a/keyboards/maxipad/Makefile +++ b/keyboards/maxipad/Makefile @@ -1,3 +1,3 @@ ifndef MAKEFILE_INCLUDED include ../../Makefile -endif +endif \ No newline at end of file diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index fbe64a5b0b..a056e4963b 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -24,124 +24,49 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 #define DEVICE_VER 0x0001 -#define MANUFACTURER Wootpatoot +#define MANUFACTURER wootpatoot #define PRODUCT maxipad #define DESCRIPTION A custom keyboard - /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 6 -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } -#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } -#define UNUSED_PINS +// Planck PCB default pin-out +// Change this to how you wired your keyboard +// COLS: Left to right, ROWS: Top to bottom +#ifdef USE_PRO_MICRO + #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } + #define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 } + #define UNUSED_PINS + #else + #define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } + #define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } + #define UNUSED_PINS + #endif /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ +/* define if matrix has ghost */ //#define MATRIX_HAS_GHOST /* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ +/* key combination for command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/maxipad/keymaps/default/Makefile b/keyboards/maxipad/keymaps/default/Makefile deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/maxipad/keymaps/default/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/maxipad/keymaps/default/config.h b/keyboards/maxipad/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/maxipad/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif \ No newline at end of file diff --git a/keyboards/maxipad/keymaps/default/keymap.c b/keyboards/maxipad/keymaps/default/keymap.c index 43ace32419..227cef7d86 100644 --- a/keyboards/maxipad/keymaps/default/keymap.c +++ b/keyboards/maxipad/keymaps/default/keymap.c @@ -1,5 +1,5 @@ #include "maxipad.h" - + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( /* Base */ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, \ @@ -13,42 +13,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC \ ), }; - + const uint16_t PROGMEM fn_actions[] = { - }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // MACRODOWN only works in this function { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} \ No newline at end of file +}; \ No newline at end of file diff --git a/keyboards/maxipad/keymaps/default/readme.md b/keyboards/maxipad/keymaps/default/readme.md deleted file mode 100644 index a6c0d4a3f0..0000000000 --- a/keyboards/maxipad/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for maxipad \ No newline at end of file diff --git a/keyboards/maxipad/maxipad.c b/keyboards/maxipad/maxipad.c index 879ae86a76..a193b112b9 100644 --- a/keyboards/maxipad/maxipad.c +++ b/keyboards/maxipad/maxipad.c @@ -1,28 +1 @@ -#include "maxipad.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} +#include "maxipad.h" \ No newline at end of file diff --git a/keyboards/maxipad/maxipad.h b/keyboards/maxipad/maxipad.h index eee1309ddc..4d8c6428d2 100644 --- a/keyboards/maxipad/maxipad.h +++ b/keyboards/maxipad/maxipad.h @@ -8,18 +8,18 @@ // The first section contains all of the arguements // The second converts the arguments into a two-dimensional array #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, \ - k10, k11, k12, k13, k14, k15, \ - k20, k21, k22, k23, k24, k25, \ - k30, k31, k32, k33, k34, k35, \ - k40, k41, k42, k43, k44, k45 \ + k00, k01, k02, k03, k04, k05, \ + k10, k11, k12, k13, k14, k15, \ + k20, k21, k22, k23, k24, k25, \ + k30, k31, k32, k33, k34, k35, \ + k40, k41, k42, k43, k44, k45 \ ) \ { \ { k00, k01, k02, k03, k04, k05 }, \ { k10, k11, k12, k13, k14, k15 }, \ { k20, k21, k22, k23, k24, k25 }, \ { k30, k31, k32, k33, k34, k35 }, \ - { k40, k41, k42, k43, k44, k45} \ + { k40, k41, k42, k43, k44, k45 } \ } #endif diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md index 1971ce1f36..4e1702c5ad 100644 --- a/keyboards/maxipad/readme.md +++ b/keyboards/maxipad/readme.md @@ -1,46 +1,27 @@ -maxipad keyboard firmware +Maxipad keyboard firmware ====================== ## Quantum MK Firmware -<<<<<<< HEAD -For the full Quantum feature list, see [the parent readme](/). -======= -For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +For the full Quantum feature list, see [the parent readme.md](/readme.md). ## Building +If you are using a pro micro then make sure to enable USE_PRO_MICRO in the makefile + Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. Depending on which keymap you would like to use, you will have to compile slightly differently. ### Default - -<<<<<<< HEAD To build with the default keymap, simply run `make default`. -======= -To build with the default keymap, simply run `make`. ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df ### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `.c` and see keymap document (you can find in top readme.md) and existent keymap files. -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -<<<<<<< HEAD To build the firmware binary hex file with a keymap just do `make` with a keymap like this: ``` $ make [default|jack|] ``` - -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. -======= -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: - -``` -$ make keymap=[default|jack|] -``` - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. \ No newline at end of file diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 55898147dd..e6e5923f16 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -1,3 +1,5 @@ + + # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -49,19 +51,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # Build Options -# change yes to no to disable +# comment out to disable the options. # -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 +# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +USE_PRO_MICRO ?= yes \ No newline at end of file From e356de222023d2a8f7d5ee79030a37eaa9b1b25f Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 19 Nov 2016 00:44:52 -0500 Subject: [PATCH 024/124] added the pinout for pro micro into maxipad --- keyboards/maxipad/config.h | 12 +++++++++--- keyboards/maxipad/rules.mk | 1 + 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index fbe64a5b0b..fc5ab77617 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -43,9 +43,15 @@ along with this program. If not, see . * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ -#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } -#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } -#define UNUSED_PINS +//Pro micro pinout + #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } + #define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 } + #define UNUSED_PINS +//Teensy 2 pinout + //#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } + //#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } + //#define UNUSED_PINS + /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 55898147dd..f9bf74179b 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -65,3 +65,4 @@ MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE ?= no # Audio output on port C6 +USE_PRO_MICRO ?= yes \ No newline at end of file From 102a830bbdb302eb0951ec7910ab7c9feae272d1 Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 19 Nov 2016 00:49:20 -0500 Subject: [PATCH 025/124] changed readme --- keyboards/maxipad/readme.md | 2 ++ keyboards/maxipad/rules.mk | 3 +-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md index ab7b122fe8..de2265d111 100644 --- a/keyboards/maxipad/readme.md +++ b/keyboards/maxipad/readme.md @@ -5,6 +5,8 @@ For the full Quantum feature list, see [the parent readme](/). ## Building +Change the config.h pinout to match your mcu!! + Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. Depending on which keymap you would like to use, you will have to compile slightly differently. diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index f9bf74179b..56b2042efa 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -64,5 +64,4 @@ BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 -USE_PRO_MICRO ?= yes \ No newline at end of file +AUDIO_ENABLE ?= no # Audio output on port C6 \ No newline at end of file From ffa5b1e7ea6697acf9ebfcade1149031642f7870 Mon Sep 17 00:00:00 2001 From: Gergely Nagy Date: Sat, 19 Nov 2016 11:32:09 +0100 Subject: [PATCH 026/124] Add a timeout to space-cadet shift. When one holds a Space Cadet shift, to have it act as a shift, so that mouse behaviour changes, when released without any other key pressed, it still registers a paren. To remedy this, add a hold timeout: if the key is held longer than TAPPING_TERM, it will not register the parens. Fixes #884, with the side-effect of not being able to have parens trigger the OS-side repeat anymore. Signed-off-by: Gergely Nagy --- quantum/quantum.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/quantum/quantum.c b/quantum/quantum.c index 098312e6ef..2addcb670c 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -75,6 +75,7 @@ void reset_keyboard(void) { #endif static bool shift_interrupted[2] = {0, 0}; +static uint16_t scs_timer = 0; bool process_record_quantum(keyrecord_t *record) { @@ -283,6 +284,7 @@ bool process_record_quantum(keyrecord_t *record) { case KC_LSPO: { if (record->event.pressed) { shift_interrupted[0] = false; + scs_timer = timer_read (); register_mods(MOD_BIT(KC_LSFT)); } else { @@ -292,7 +294,7 @@ bool process_record_quantum(keyrecord_t *record) { shift_interrupted[1] = true; } #endif - if (!shift_interrupted[0]) { + if (!shift_interrupted[0] && timer_elapsed(scs_timer) < TAPPING_TERM) { register_code(LSPO_KEY); unregister_code(LSPO_KEY); } @@ -305,6 +307,7 @@ bool process_record_quantum(keyrecord_t *record) { case KC_RSPC: { if (record->event.pressed) { shift_interrupted[1] = false; + scs_timer = timer_read (); register_mods(MOD_BIT(KC_RSFT)); } else { @@ -314,7 +317,7 @@ bool process_record_quantum(keyrecord_t *record) { shift_interrupted[1] = true; } #endif - if (!shift_interrupted[1]) { + if (!shift_interrupted[1] && timer_elapsed(scs_timer) < TAPPING_TERM) { register_code(RSPC_KEY); unregister_code(RSPC_KEY); } From 7f5e71d79fb5ca70139c42b83c158738217c1c8a Mon Sep 17 00:00:00 2001 From: "samgalson@gmail.com" Date: Sat, 19 Nov 2016 14:21:12 +0000 Subject: [PATCH 027/124] adds galson keymap --- keyboards/ergodox/keymaps/galson/Makefile | 2 + keyboards/ergodox/keymaps/galson/keymap.c | 183 +++++++++++++++++++++ keyboards/ergodox/keymaps/galson/readme.md | 11 ++ 3 files changed, 196 insertions(+) create mode 100644 keyboards/ergodox/keymaps/galson/Makefile create mode 100644 keyboards/ergodox/keymaps/galson/keymap.c create mode 100644 keyboards/ergodox/keymaps/galson/readme.md diff --git a/keyboards/ergodox/keymaps/galson/Makefile b/keyboards/ergodox/keymaps/galson/Makefile new file mode 100644 index 0000000000..f008f50793 --- /dev/null +++ b/keyboards/ergodox/keymaps/galson/Makefile @@ -0,0 +1,2 @@ +COMMAND_ENABLE = no # Commands for debug and configuration + diff --git a/keyboards/ergodox/keymaps/galson/keymap.c b/keyboards/ergodox/keymaps/galson/keymap.c new file mode 100644 index 0000000000..0d3e7560dd --- /dev/null +++ b/keyboards/ergodox/keymaps/galson/keymap.c @@ -0,0 +1,183 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | + | 1 | 2 | 3 | 4 | 5 | rclk | | lclk | 6 | 7 | 8 | 9 | 0 | - | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | = | Q | W | E | R |cmd/T |shift | |shift |cmd/Y | U | I | O | P | \ | + * |--------+------+------+------+------+------| ( | | ) |------+------+------+------+------+--------| + * | " | A | S | D | F | G |------| |------| H | J | K | L |; / L2| ' | + * |--------+------+------+------+------+------| ctrl | | ctrl |------+------+------+------+------+--------| + * | { | Z | X | C | V | B | [ | | ] | N | M | , | . | / | } | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | _ | ` | $ | Left | Right| | Up | Down | : | * | ! | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | < | | | | & | > | + * ,------|------|------| |------+--------+------. + * | | | # | | @ | | | + * | Space|Backsp|------| |------| Tab |Enter | + * | |ace | % | | ESC | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + KC_PLUS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_BTN2, + KC_EQL, KC_Q, KC_W, KC_E, KC_R, GUI_T(KC_T), KC_LSPO, + KC_DQUO, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LCBR, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_LBRC), + KC_UNDS, KC_GRV, KC_DLR, KC_LEFT,KC_RGHT, + KC_LABK, KC_PIPE, + KC_HASH, + KC_SPC, KC_BSPC,KC_PERC, + // right hand + KC_BTN1, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_RSPC, GUI_T(KC_Y), KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN), KC_QUOT, + CTL_T(KC_RBRC), KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RCBR, + KC_UP, KC_DOWN,KC_COLN,KC_ASTR, KC_EXLM, + KC_AMPR, KC_RABK, + KC_AT, + KC_ESC, KC_TAB, KC_ENT + ), +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, + KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS, + KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS +), +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/galson/readme.md b/keyboards/ergodox/keymaps/galson/readme.md new file mode 100644 index 0000000000..ebc916725b --- /dev/null +++ b/keyboards/ergodox/keymaps/galson/readme.md @@ -0,0 +1,11 @@ +# Galson keymap + + +Sep 26, 2016. + +This is an ergonomic layout for programming for those with typing-related injuries. Key features: + +- As many symbol keys as possible are accessible without shifting. These should be accessed by moving the entire hand and pressing with a strong finger. +- Arrow keys and left and right mouse clicks for mouse-free navigation when combined with head mouse or eyetracker. +- Modifier keys are dual role and relocated to positions convenient for the index finger. +- Positions are more convenient when the keyboard is vertically mounted (as it should be!) \ No newline at end of file From 620e4f74d39bbcd9a41b6deed0fb990dfadbd106 Mon Sep 17 00:00:00 2001 From: Seth Chandler Date: Sat, 19 Nov 2016 11:37:12 -0500 Subject: [PATCH 028/124] move KC expansion to separate macros --- keyboards/gh60/gh60.h | 49 ++++++++++++++++++-- keyboards/gh60/keymaps/default/keymap.c | 12 ++--- keyboards/gh60/keymaps/robotmaxtron/keymap.c | 24 +++++----- keyboards/gh60/keymaps/sethbc/keymap.c | 4 +- 4 files changed, 66 insertions(+), 23 deletions(-) diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h index 899f7dc6a3..4f206cc161 100644 --- a/keyboards/gh60/gh60.h +++ b/keyboards/gh60/gh60.h @@ -34,6 +34,20 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ +} + +#define KC_KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ ) { \ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ @@ -42,13 +56,28 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ } -/* ANSI valiant. No extra keys for ISO */ +/* ANSI variant. No extra keys for ISO */ #define KEYMAP_ANSI( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ K40, K41, K42, K45, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D } \ +} + +/* ANSI variant with KC expansion */ +#define KC_KEYMAP_ANSI( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ ) { \ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ @@ -57,12 +86,28 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ } +/* HHKB Variant */ #define KEYMAP_HHKB( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ K40, K41, K42, K45, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ +} + +/* HHKB Variant with KC expansion */ +#define KC_KEYMAP_HHKB( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ ) { \ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ @@ -71,6 +116,4 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ } - - #endif diff --git a/keyboards/gh60/keymaps/default/keymap.c b/keyboards/gh60/keymaps/default/keymap.c index 3622be41b8..5c88b2ecf1 100644 --- a/keyboards/gh60/keymaps/default/keymap.c +++ b/keyboards/gh60/keymaps/default/keymap.c @@ -3,21 +3,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* 0: qwerty */ - KEYMAP( + KC_KEYMAP( ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, \ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NO, ENT, \ LSFT,FN1, Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, RSFT, \ LCTL,LGUI,LALT, SPC, BSLS,RALT,RGUI,APP, RCTL), /* 1: fn */ - KEYMAP( + KC_KEYMAP( ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, \ TRNS,TRNS,UP, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), /* 2: arrows */ - KEYMAP( + KC_KEYMAP( TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ @@ -49,7 +49,7 @@ void matrix_scan_user(void) { //Layer LED indicators uint32_t layer = layer_state; - + if (layer & (1<<1)) { gh60_wasd_leds_on(); gh60_fn_led_on(); @@ -57,7 +57,7 @@ void matrix_scan_user(void) { gh60_wasd_leds_off(); gh60_fn_led_off(); } - + if (layer & (1<<2)) { gh60_poker_leds_on(); gh60_esc_led_on(); @@ -65,5 +65,5 @@ void matrix_scan_user(void) { gh60_poker_leds_off(); gh60_esc_led_off(); } - + }; diff --git a/keyboards/gh60/keymaps/robotmaxtron/keymap.c b/keyboards/gh60/keymaps/robotmaxtron/keymap.c index 263eec4e53..d53589e811 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/keymap.c +++ b/keyboards/gh60/keymaps/robotmaxtron/keymap.c @@ -8,7 +8,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* - * Base layer, pretty standard ANSI layout. + * Base layer, pretty standard ANSI layout. * ,-----------------------------------------------------------. * |FN12| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | * |-----------------------------------------------------------| @@ -21,14 +21,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Gui |Alt | Space |Alt |Fn |Menu|Ctrl| * `-----------------------------------------------------------' */ - [_BL] = KEYMAP( + [_BL] = KC_KEYMAP( FN12,1,2,3,4,5,6,7,8,9,0,MINS,EQL,BSPC, \ TAB,Q,W,E,R,T,Y,U,I,O,P,LBRC,RBRC,BSLS, \ FN2,A,S,D,F,G,H,J,K,L,SCLN,QUOT,NO,ENT, \ LSFT,NO,Z,X,C,V,B,N,M,COMM,DOT,SLSH,NO,RSFT, \ LCTL,LGUI,LALT, SPC, NO,RALT,FN0,APP, RCTL), - - /* + + /* * Locking arrow keys to WASD for when you need dedicated arrow keys * ,-----------------------------------------------------------. * | | | | | | | | | | | | | | | @@ -42,7 +42,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | * `-----------------------------------------------------------' */ - [_AL] = KEYMAP( + [_AL] = KC_KEYMAP( TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ TRNS,TRNS,UP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ @@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), - /* + /* * Primary function layer, mostly the same as the traditional Pok3r layout. * ,-------------------------------------------------------------. * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | @@ -64,16 +64,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | * `-------------------------------------------------------------' */ - [_FL] = KEYMAP( + [_FL] = KC_KEYMAP( GRAVE,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12, DELETE, \ TRNS,FN1,TRNS,TRNS,TRNS,TRNS,CALC,PGUP,UP,PGDN,PSCR,SLCK,PAUS,TRNS, \ TRNS,MUTE,_VOLDOWN,_VOLUP,TRNS,TRNS,HOME,LEFT,DOWN,RGHT,INS,TRNS,TRNS,TRNS, \ TRNS,TRNS,FN3,TRNS,TRNS,TRNS,TRNS,END,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), - - /* + + /* * Locking layer for controlling the underglow. - * + * * ,-----------------------------------------------------------. * | | | | | | | | | | | | | | | * |-----------------------------------------------------------| @@ -86,7 +86,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | * `-----------------------------------------------------------' */ - [_UL] = KEYMAP( + [_UL] = KC_KEYMAP( TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ TRNS,FN4,FN5,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ @@ -124,7 +124,7 @@ const uint16_t PROGMEM fn_actions[] = { const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function + // MACRODOWN only works in this function switch(id) { case 0: if (record->event.pressed) { diff --git a/keyboards/gh60/keymaps/sethbc/keymap.c b/keyboards/gh60/keymaps/sethbc/keymap.c index 85a46a29bd..141c7f0b00 100644 --- a/keyboards/gh60/keymaps/sethbc/keymap.c +++ b/keyboards/gh60/keymaps/sethbc/keymap.c @@ -6,14 +6,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* 0: qwerty */ - KEYMAP_HHKB( + KC_KEYMAP_HHKB( FN0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS, GRV, \ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \ LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT, FN1, \ LCTL,LALT,LGUI, SPC, RGUI,RALT,APP, RCTL), /* 1: fn */ - KEYMAP_HHKB( + KC_KEYMAP_HHKB( GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,UP,TRNS,TRNS, \ TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RIGHT,PENT, \ From 74a1f00713d1407fb1d2e20d58da93919ab0c221 Mon Sep 17 00:00:00 2001 From: Gergely Nagy Date: Sat, 19 Nov 2016 18:19:18 +0100 Subject: [PATCH 029/124] Fix the Space Cadet timeout code Define a default TAPPING_TERM in quantum.c, for keyboards that do not have it set. Fixes the CI failure. Signed-off-by: Gergely Nagy --- quantum/quantum.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/quantum/quantum.c b/quantum/quantum.c index 2addcb670c..b5e2d60b9d 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -1,5 +1,9 @@ #include "quantum.h" +#ifndef TAPPING_TERM +#define TAPPING_TERM 200 +#endif + static void do_code16 (uint16_t code, void (*f) (uint8_t)) { switch (code) { case QK_MODS ... QK_MODS_MAX: From df8724ce08e09b6b077b601da7976639140655d7 Mon Sep 17 00:00:00 2001 From: Seth Chandler Date: Sat, 19 Nov 2016 12:19:21 -0500 Subject: [PATCH 030/124] remove KC expansion from GH60 --- keyboards/gh60/gh60.h | 44 ----------------- keyboards/gh60/keymaps/default/keymap.c | 36 +++++++------- keyboards/gh60/keymaps/robotmaxtron/keymap.c | 50 ++++++++++---------- keyboards/gh60/keymaps/sethbc/keymap.c | 24 +++++----- 4 files changed, 55 insertions(+), 99 deletions(-) diff --git a/keyboards/gh60/gh60.h b/keyboards/gh60/gh60.h index 4f206cc161..66bc2790d2 100644 --- a/keyboards/gh60/gh60.h +++ b/keyboards/gh60/gh60.h @@ -42,20 +42,6 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ } -#define KC_KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ -) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ -} - /* ANSI variant. No extra keys for ISO */ #define KEYMAP_ANSI( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ @@ -71,21 +57,6 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D } \ } -/* ANSI variant with KC expansion */ -#define KC_KEYMAP_ANSI( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D }, \ - { KC_##K30, KC_NO, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_NO, KC_##K3D }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ -} - /* HHKB Variant */ #define KEYMAP_HHKB( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\ @@ -101,19 +72,4 @@ inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ } -/* HHKB Variant with KC expansion */ -#define KC_KEYMAP_HHKB( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D }, \ - { KC_##K30, KC_NO, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ -} - #endif diff --git a/keyboards/gh60/keymaps/default/keymap.c b/keyboards/gh60/keymaps/default/keymap.c index 5c88b2ecf1..92f5459840 100644 --- a/keyboards/gh60/keymaps/default/keymap.c +++ b/keyboards/gh60/keymaps/default/keymap.c @@ -3,26 +3,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* 0: qwerty */ - KC_KEYMAP( - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \ - CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NO, ENT, \ - LSFT,FN1, Z, X, C, V, B, N, M, COMM,DOT, SLSH,FN0, RSFT, \ - LCTL,LGUI,LALT, SPC, BSLS,RALT,RGUI,APP, RCTL), + KEYMAP( + KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_GRV,\ + KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSPC,\ + KC_CAPS,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT,\ + KC_LSFT,F(1),KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,F(0),KC_RSFT,\ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_BSLS,KC_RALT,KC_RGUI,KC_APP,KC_RCTL), /* 1: fn */ - KC_KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, \ - TRNS,TRNS,UP, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), + KEYMAP( + KC_ESC,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,\ + KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), /* 2: arrows */ - KC_KEYMAP( - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,UP, \ - TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,LEFT,DOWN,RGHT), + KEYMAP( + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT), }; const uint16_t PROGMEM fn_actions[] = { diff --git a/keyboards/gh60/keymaps/robotmaxtron/keymap.c b/keyboards/gh60/keymaps/robotmaxtron/keymap.c index d53589e811..9acac7cecf 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/keymap.c +++ b/keyboards/gh60/keymaps/robotmaxtron/keymap.c @@ -10,7 +10,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* * Base layer, pretty standard ANSI layout. * ,-----------------------------------------------------------. - * |FN12| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |F(12)| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | * |-----------------------------------------------------------| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| * |-----------------------------------------------------------| @@ -21,12 +21,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Gui |Alt | Space |Alt |Fn |Menu|Ctrl| * `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ocking arrow keys to WASD for when you need dedicated arrow keys @@ -42,12 +42,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | * `-----------------------------------------------------------' */ - [_AL] = KC_KEYMAP( - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,UP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), + [_AL] = KEYMAP( + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), /* @@ -64,12 +64,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | * `-------------------------------------------------------------' */ - [_FL] = KC_KEYMAP( - GRAVE,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12, DELETE, \ - TRNS,FN1,TRNS,TRNS,TRNS,TRNS,CALC,PGUP,UP,PGDN,PSCR,SLCK,PAUS,TRNS, \ - TRNS,MUTE,_VOLDOWN,_VOLUP,TRNS,TRNS,HOME,LEFT,DOWN,RGHT,INS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,FN3,TRNS,TRNS,TRNS,TRNS,END,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), + [_FL] = KEYMAP( + KC_GRAVE,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \ + KC_TRNS,F(1),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_CALC,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS, \ + KC_TRNS,KC_MUTE,KC__VOLDOWN,KC__VOLUP,KC_TRNS,KC_TRNS,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,F(3),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_END,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), /* * Locking layer for controlling the underglow. @@ -86,12 +86,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | * `-----------------------------------------------------------' */ - [_UL] = KC_KEYMAP( - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,FN4,FN5,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS,FN6,FN7,FN8,FN9,FN10,FN11,TRNS,TRNS,TRNS,TRNS,TRNS, \ - TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), + [_UL] = KEYMAP( + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), }; enum function_id { diff --git a/keyboards/gh60/keymaps/sethbc/keymap.c b/keyboards/gh60/keymaps/sethbc/keymap.c index 141c7f0b00..599e664e23 100644 --- a/keyboards/gh60/keymaps/sethbc/keymap.c +++ b/keyboards/gh60/keymaps/sethbc/keymap.c @@ -6,19 +6,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* 0: qwerty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fn */ - KC_KEYMAP_HHKB( - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ - CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,UP,TRNS,TRNS, \ - TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RIGHT,PENT, \ - TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END,PGDN,DOWN,TRNS,TRNS, \ - TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS), + KEYMAP_HHKB( + KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_TRNS,KC_TRNS,\ + KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,\ + KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RIGHT,KC_PENT,\ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END,KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS), }; enum function_id { From c86bbf474e7709749dfd5e09fa5defd5e6baaaa3 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 20 Nov 2016 19:28:10 +0200 Subject: [PATCH 031/124] Always initialze the Infinity Ergodox backlight Otherwise it will stay lit. The set_led functionality is also disabled since it doesn't work properly for slaves. --- keyboards/ergodox/infinity/infinity.c | 6 ++++-- keyboards/ergodox/infinity/led.c | 25 +------------------------ 2 files changed, 5 insertions(+), 26 deletions(-) diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c index c5793385fe..02db67eaf2 100644 --- a/keyboards/ergodox/infinity/infinity.c +++ b/keyboards/ergodox/infinity/infinity.c @@ -38,7 +38,6 @@ void init_serial_link_hal(void) { // Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced // Which will reduce the brightness range #define PRESCALAR_DEFINE 0 -#ifdef VISUALIZER_ENABLE void lcd_backlight_hal_init(void) { // Setup Backlight SIM->SCGC6 |= SIM_SCGC6_FTM0; @@ -76,7 +75,6 @@ void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { CHANNEL_GREEN.CnV = g; CHANNEL_BLUE.CnV = b; } -#endif __attribute__ ((weak)) void matrix_init_user(void) { @@ -92,6 +90,10 @@ void matrix_init_kb(void) { // runs once when the firmware starts up matrix_init_user(); + // The backlight always has to be initialized, otherwise it will stay lit +#ifndef VISUALIZER_ENABLE + lcd_backlight_hal_init(); +#endif } void matrix_scan_kb(void) { diff --git a/keyboards/ergodox/infinity/led.c b/keyboards/ergodox/infinity/led.c index 77195bb358..8175c1c5c5 100644 --- a/keyboards/ergodox/infinity/led.c +++ b/keyboards/ergodox/infinity/led.c @@ -21,29 +21,6 @@ along with this program. If not, see . void led_set(uint8_t usb_led) { -// The LCD backlight functionality conflicts with this simple -// red backlight -#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE) - // PTC1: LCD Backlight Red(0:on/1:off) - GPIOC->PDDR |= (1<<1); - PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - if (usb_led & (1<PCOR |= (1<<1); - } else { - GPIOC->PSOR |= (1<<1); - } -#elif !defined(LCD_BACKLIGHT_ENABLE) + //TODO: Add led emulation if there's no customized visualization (void)usb_led; - GPIOC->PDDR |= (1<<1); - PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - GPIOC->PSOR |= (1<<1); - GPIOC->PDDR |= (1<<2); - PORTC->PCR[2] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - GPIOC->PSOR |= (1<<2); - GPIOC->PDDR |= (1<<3); - PORTC->PCR[3] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); - GPIOC->PSOR |= (1<<3); -#else - (void)usb_led; -#endif } From a8b1c47f0f6e63dc1260159b7b8b2172a3b57ff4 Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 11:10:26 -0800 Subject: [PATCH 032/124] add sh-hhkb-jp layers --- keyboards/hhkb/keymaps/sh_jp/Makefile | 1 + keyboards/hhkb/keymaps/sh_jp/README.md | 84 ++++++++++++++++++++++++++ keyboards/hhkb/keymaps/sh_jp/keymap.c | 60 ++++++++++++++++++ 3 files changed, 145 insertions(+) create mode 100644 keyboards/hhkb/keymaps/sh_jp/Makefile create mode 100644 keyboards/hhkb/keymaps/sh_jp/README.md create mode 100644 keyboards/hhkb/keymaps/sh_jp/keymap.c diff --git a/keyboards/hhkb/keymaps/sh_jp/Makefile b/keyboards/hhkb/keymaps/sh_jp/Makefile new file mode 100644 index 0000000000..a7f700f019 --- /dev/null +++ b/keyboards/hhkb/keymaps/sh_jp/Makefile @@ -0,0 +1 @@ +OPT_DEFS += -DHHKB_JP diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md new file mode 100644 index 0000000000..7be38a415f --- /dev/null +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -0,0 +1,84 @@ +Keymaps for both Dvorak layout and QWER layout for HHKB JP. +1. The default layout is Dvorak. +2. Use `Tog` to toggle between Dvorak and QWER +3. Holding `NewCmd`, the original `LftCmd`, will activate the `NewCmd` layer which means `NewCmd+key` is the same as `Cmd+key` in normal QWER layout.[1](#cmdTab) + - For example, no matter you are in Dvorak layout or QWER layout, you can use `Cmd+s` to save a currently editing file. +4. `Symb` makes type symbols easier: for example: `Symb+a` is `!`. +5. `Spc+key` equals to `Shft+key` while using `Spc` alone will yield a space as usual. +6. There's an extra `Tab` in the last line. + +``` +Layer QWER: +,-----------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| |Bsp| +|-----------------------------------------------------------| +|Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| | +|------------------------------------------------------` Ent| +|Ctrl | A| O| E| U| I| D| H| T| N| S| -| \| | +|-----------------------------------------------------------| +|Shft | ;| Q| J| K| X| B| M| W| V| Z| | Up| | +|-----------------------------------------------------------| +|FN| `| Alt|NewCmd|Symb| Spc |Symb|Tab|RCmd|Tog|Lft|Dwn|Rgh| +`-----------------------------------------------------------' +``` + +``` +Layer QWER: +,-----------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =| |Bsp| +|-----------------------------------------------------------| +|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | +|------------------------------------------------------` Ent| +|Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | +|-----------------------------------------------------------| +|Shft | Z| X| C| V| B| N| M| ,| .| /| | Up| | +|-----------------------------------------------------------| +|FN| `| Alt|NewCmd|Symb| Spc |Symb|Tab|Cmd|Tog|Lft|Dwn|Rgh| +`-----------------------------------------------------------' +``` + +``` +Layer Symb: +,-----------------------------------------------------------. +| | | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | [| ]| | | {| }| | | | | | +|------------------------------------------------------` | +| | !| @| #| $| %| ^| &| *| (| )| '| \| | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | +`-----------------------------------------------------------' +``` + +``` +Layer FUNC: HHKB mode (HHKB Fn) +,-----------------------------------------------------------. +|Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| +|-----------------------------------------------------------| +|Caps | | | | | | | |Psc|Slk|Pus|Up | | | +|------------------------------------------------------` | +| |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | | +|-----------------------------------------------------------| +| | | | | | | +| -|End|PgD|Dow| | | | +|-----------------------------------------------------------| +| || | | | | | | | | || | | | +`-----------------------------------------------------------' +``` + +``` +Empty Layer: +,-----------------------------------------------------------. +| | | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | | +|------------------------------------------------------` | +| | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | | +|-----------------------------------------------------------| +| | | | | | | | | | | | | | +`-----------------------------------------------------------' +``` +1: `NewCmd + Tab` does not work, you can use `RCmd+Tab` to switch among applications. diff --git a/keyboards/hhkb/keymaps/sh_jp/keymap.c b/keyboards/hhkb/keymaps/sh_jp/keymap.c new file mode 100644 index 0000000000..16181acd3e --- /dev/null +++ b/keyboards/hhkb/keymaps/sh_jp/keymap.c @@ -0,0 +1,60 @@ +#include "hhkb.h" + +#define _______ KC_TRNS + +enum { + DVOR, + QWER, + NEW_CMD, + SYMB, + FUNC +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DVOR] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_JYEN, KC_BSPC, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_BSLS, KC_ENT, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RO, KC_UP, KC_RSFT, + MO(FUNC), KC_ZKHK, KC_LALT, MO(NEW_CMD), MO(SYMB), MT(MOD_LSFT, KC_SPC), MO(SYMB), KC_TAB, KC_RGUI, TG(QWER), KC_LEFT, KC_DOWN, KC_RGHT + ), + [QWER] = KEYMAP_JP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_UP, KC_RSFT, + MO(FUNC), KC_ZKHK, KC_LALT, MO(NEW_CMD), MO(SYMB), MT(MOD_LSFT, KC_SPC), MO(SYMB), KC_TAB, KC_RGUI, _______, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [NEW_CMD] = KEYMAP_JP( + _______, LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), _______, _______, _______, _______, + _______, LGUI(KC_Q), LGUI(KC_W), LGUI(KC_E), LGUI(KC_R), LGUI(KC_T), LGUI(KC_Y), LGUI(KC_U), LGUI(KC_I), LGUI(KC_O), LGUI(KC_P), LGUI(KC_LBRC), LGUI(KC_RBRC), + _______, LGUI(KC_A), LGUI(KC_S), LGUI(KC_D), LGUI(KC_F), LGUI(KC_G), LGUI(KC_H), LGUI(KC_J), LGUI(KC_K), LGUI(KC_L), _______, _______, _______, _______, + LGUI(KC_LSFT), LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LGUI(KC_B), LGUI(KC_N), LGUI(KC_M), LGUI(KC_COMM), LGUI(KC_DOT), LGUI(KC_SLSH), _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT) + ), + + [SYMB] = KEYMAP_JP( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, LSFT(KC_LBRC), LSFT(KC_RBRC), _______, _______,_______, _______, + _______, LSFT(KC_1),LSFT(KC_2),LSFT(KC_3),LSFT(KC_4), LSFT(KC_5), LSFT(KC_6), LSFT(KC_7), LSFT(KC_8), LSFT(KC_9), LSFT(KC_0), _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [FUNC] = KEYMAP_JP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, + _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, + _______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { + return MACRO_NONE; +} + +const uint16_t PROGMEM fn_actions[] = { + +}; From 11f17e3b233dbbf7c39e5e0042cc5fdff3acba55 Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 11:12:48 -0800 Subject: [PATCH 033/124] Update README.md --- keyboards/hhkb/keymaps/sh_jp/README.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md index 7be38a415f..6c6ab1bc65 100644 --- a/keyboards/hhkb/keymaps/sh_jp/README.md +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -1,4 +1,5 @@ -Keymaps for both Dvorak layout and QWER layout for HHKB JP. +###Keymaps with both Dvorak layout and QWER layout for HHKB JP. + 1. The default layout is Dvorak. 2. Use `Tog` to toggle between Dvorak and QWER 3. Holding `NewCmd`, the original `LftCmd`, will activate the `NewCmd` layer which means `NewCmd+key` is the same as `Cmd+key` in normal QWER layout.[1](#cmdTab) From 34aa59c6d514cb30ca3582200cadd1da4786c50c Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 11:13:57 -0800 Subject: [PATCH 034/124] Update README.md --- keyboards/hhkb/keymaps/sh_jp/README.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md index 6c6ab1bc65..65e781cf30 100644 --- a/keyboards/hhkb/keymaps/sh_jp/README.md +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -4,7 +4,8 @@ 2. Use `Tog` to toggle between Dvorak and QWER 3. Holding `NewCmd`, the original `LftCmd`, will activate the `NewCmd` layer which means `NewCmd+key` is the same as `Cmd+key` in normal QWER layout.[1](#cmdTab) - For example, no matter you are in Dvorak layout or QWER layout, you can use `Cmd+s` to save a currently editing file. -4. `Symb` makes type symbols easier: for example: `Symb+a` is `!`. +4. `Symb` makes type symbols easier + - for example: `Symb+a` is `!`. 5. `Spc+key` equals to `Shft+key` while using `Spc` alone will yield a space as usual. 6. There's an extra `Tab` in the last line. From 23f63ed1b9487271f8156ecf191ab7d82d595e81 Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 11:18:08 -0800 Subject: [PATCH 035/124] Update README.md --- keyboards/hhkb/keymaps/sh_jp/README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md index 65e781cf30..37fa43e66f 100644 --- a/keyboards/hhkb/keymaps/sh_jp/README.md +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -10,7 +10,7 @@ 6. There's an extra `Tab` in the last line. ``` -Layer QWER: +Layer DVOR: ,-----------------------------------------------------------. |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| |Bsp| |-----------------------------------------------------------| From 6f24344be78985be5eb2f6e75f1dee546f539646 Mon Sep 17 00:00:00 2001 From: Didier Chagniot Date: Sun, 20 Nov 2016 20:51:05 +0100 Subject: [PATCH 036/124] typo fix --- .../ergodox/keymaps/dvorak_emacs/keymap.c | 2 +- .../ergodox/keymaps/dvorak_emacs/readme.md | 36 +++++++++---------- 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/keyboards/ergodox/keymaps/dvorak_emacs/keymap.c b/keyboards/ergodox/keymaps/dvorak_emacs/keymap.c index 4cb11a56f4..d33c6e5271 100755 --- a/keyboards/ergodox/keymaps/dvorak_emacs/keymap.c +++ b/keyboards/ergodox/keymaps/dvorak_emacs/keymap.c @@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Base layer * Keys with double values (like Esc/Ctrl) correspond to the 'tapped' key and the 'held' key, respectively * - * ,--------------------------------------------------. ,--------------------------------------------------. + * ,--------------------------------------------------. ,--------------------------------------------------. * | | 1 | 2 | 3 | 4 | 5 | Esc | | Esc | 6 | 7 | 8 | 9 | 0 | = / + | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | ~ |" / ' |, / < |. / > | P | Y | [ | | ] | F | G | C | H | L | / / ? | diff --git a/keyboards/ergodox/keymaps/dvorak_emacs/readme.md b/keyboards/ergodox/keymaps/dvorak_emacs/readme.md index 0578f1e257..a3fc34afeb 100644 --- a/keyboards/ergodox/keymaps/dvorak_emacs/readme.md +++ b/keyboards/ergodox/keymaps/dvorak_emacs/readme.md @@ -1,6 +1,6 @@ # Ergodox Dvorak Layout with emacs binding in mind * Control & Alt key on the thumbs (activated if pressed with another key). - * In the same way, "I" and "R" are the shift modifier if pressed with another key. + * In the same way, "U" and "R" are the shift modifier if pressed with another key. * "I" and "D" set the layer 1 for the auxiliary keys if pressed with another key. * Software layout set to english. @@ -15,23 +15,23 @@ Keys with double values (like U/LSft) correspond to the 'tapped' key and the 'he 

 
 ,--------------------------------------------------.           ,--------------------------------------------------.
- |        |   1  |   2  |   3  |   4  |   5  |  Esc |           |  Esc |   6  |   7  |   8  |   9  |   0  |   =    |
- |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
- |   ~    |  '   |   ,  |   .  |   P  |   Y  |   [  |           |   ]  |   F  |   G  |   C  |   H  |   L  |   /    |
- |--------+------+------+------+------+------|   {  |           |   }  |------+------+------+------+------+--------|
- |  Tab   |   A  |   O  |   E  |U/LSft| I/L1 |------|           |------|  D/L1|R/RSft|   T  |   N  |   S  |   -    |
- |--------+------+------+------+------+------| LGUI |           | LGUI |------+------+------+------+------+--------|
- | {/LSft |   ;  |   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | }/RSft |
- `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
-   |      |      |      |      | ~L1  |                                       | ~L1  |      |      |   \  |        |
-   `----------------------------------'                                       `----------------------------------'
-                                        ,-------------.       ,-------------.
-                                        | HOME |  END |       | LEFT | RIGHT|
-                                 ,------|------|------|       |------+--------+------.
-                                 | BSPC |  DEL | PGUP |       |  UP  | SPACE  |RETURN|
-                                 |  /   |  /   |------|       |------|   /    |  /   |
-                                 | LCTL | LALT |PGDWN |       | DOWN | LALT   | LCTL |
-                                 `--------------------'       `----------------------'
+|        |   1  |   2  |   3  |   4  |   5  |  Esc |           |  Esc |   6  |   7  |   8  |   9  |   0  |   =    |
+|--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+|   ~    |  '   |   ,  |   .  |   P  |   Y  |   [  |           |   ]  |   F  |   G  |   C  |   H  |   L  |   /    |
+|--------+------+------+------+------+------|   {  |           |   }  |------+------+------+------+------+--------|
+|  Tab   |   A  |   O  |   E  |U/LSft| I/L1 |------|           |------|  D/L1|R/RSft|   T  |   N  |   S  |   -    |
+|--------+------+------+------+------+------| LGUI |           | LGUI |------+------+------+------+------+--------|
+| {/LSft |   ;  |   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |   Z  | }/RSft |
+`--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+  |      |      |      |      | ~L1  |                                       | ~L1  |      |      |   \  |      |
+  `----------------------------------'                                       `----------------------------------'
+                                       ,-------------.       ,-------------.
+                                       | HOME |  END |       | LEFT | RIGHT|
+                                ,------|------|------|       |------+--------+------.
+                                | BSPC |  DEL | PGUP |       |  UP  | SPACE  |RETURN|
+                                |  /   |  /   |------|       |------|   /    |  /   |
+                                | LCTL | LALT |PGDWN |       | DOWN | LALT   | LCTL |
+                                `--------------------'       `----------------------'
From ccc34851f2e12d990a6d51742fc7e85e8011a94d Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 13:31:41 -0800 Subject: [PATCH 037/124] add space to NewCmd layer --- keyboards/hhkb/keymaps/sh_jp/README.md | 2 +- keyboards/hhkb/keymaps/sh_jp/keymap.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/hhkb/keymaps/sh_jp/README.md b/keyboards/hhkb/keymaps/sh_jp/README.md index 65e781cf30..84557a5c07 100644 --- a/keyboards/hhkb/keymaps/sh_jp/README.md +++ b/keyboards/hhkb/keymaps/sh_jp/README.md @@ -8,7 +8,7 @@ - for example: `Symb+a` is `!`. 5. `Spc+key` equals to `Shft+key` while using `Spc` alone will yield a space as usual. 6. There's an extra `Tab` in the last line. - + ``` Layer QWER: ,-----------------------------------------------------------. diff --git a/keyboards/hhkb/keymaps/sh_jp/keymap.c b/keyboards/hhkb/keymaps/sh_jp/keymap.c index 16181acd3e..c2bdd37bc2 100644 --- a/keyboards/hhkb/keymaps/sh_jp/keymap.c +++ b/keyboards/hhkb/keymaps/sh_jp/keymap.c @@ -31,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, LGUI(KC_Q), LGUI(KC_W), LGUI(KC_E), LGUI(KC_R), LGUI(KC_T), LGUI(KC_Y), LGUI(KC_U), LGUI(KC_I), LGUI(KC_O), LGUI(KC_P), LGUI(KC_LBRC), LGUI(KC_RBRC), _______, LGUI(KC_A), LGUI(KC_S), LGUI(KC_D), LGUI(KC_F), LGUI(KC_G), LGUI(KC_H), LGUI(KC_J), LGUI(KC_K), LGUI(KC_L), _______, _______, _______, _______, LGUI(KC_LSFT), LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LGUI(KC_B), LGUI(KC_N), LGUI(KC_M), LGUI(KC_COMM), LGUI(KC_DOT), LGUI(KC_SLSH), _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT) + _______, _______, _______, _______, _______, LGUI(KC_SPC), _______, _______, _______, _______, LGUI(KC_LEFT), LGUI(KC_DOWN), LGUI(KC_RGHT) ), [SYMB] = KEYMAP_JP( From b75538c0bfca03f7b493b7b7dbaf9dc5e7631e53 Mon Sep 17 00:00:00 2001 From: Sihui Huang Date: Sun, 20 Nov 2016 14:45:51 -0800 Subject: [PATCH 038/124] add del to new cmd --- keyboards/hhkb/keymaps/sh_jp/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/hhkb/keymaps/sh_jp/keymap.c b/keyboards/hhkb/keymaps/sh_jp/keymap.c index c2bdd37bc2..d4cb3b0418 100644 --- a/keyboards/hhkb/keymaps/sh_jp/keymap.c +++ b/keyboards/hhkb/keymaps/sh_jp/keymap.c @@ -27,7 +27,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [NEW_CMD] = KEYMAP_JP( - _______, LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), _______, _______, _______, _______, + _______, LGUI(KC_1), LGUI(KC_2), LGUI(KC_3), LGUI(KC_4), LGUI(KC_5), LGUI(KC_6), LGUI(KC_7), LGUI(KC_8), LGUI(KC_9), LGUI(KC_0), _______, _______, _______, LGUI(KC_BSPC), _______, LGUI(KC_Q), LGUI(KC_W), LGUI(KC_E), LGUI(KC_R), LGUI(KC_T), LGUI(KC_Y), LGUI(KC_U), LGUI(KC_I), LGUI(KC_O), LGUI(KC_P), LGUI(KC_LBRC), LGUI(KC_RBRC), _______, LGUI(KC_A), LGUI(KC_S), LGUI(KC_D), LGUI(KC_F), LGUI(KC_G), LGUI(KC_H), LGUI(KC_J), LGUI(KC_K), LGUI(KC_L), _______, _______, _______, _______, LGUI(KC_LSFT), LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), LGUI(KC_B), LGUI(KC_N), LGUI(KC_M), LGUI(KC_COMM), LGUI(KC_DOT), LGUI(KC_SLSH), _______, _______, _______, From b57cf3c0c851f2fb0e32c955b16fc6f0ad236e54 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 21 Nov 2016 12:54:06 -0500 Subject: [PATCH 039/124] more structure to the package --- tmk_core/protocol/lufa/lufa.c | 107 ++++++++++++++++++++++++++++------ tmk_core/protocol/lufa/lufa.h | 15 ++++- 2 files changed, 100 insertions(+), 22 deletions(-) diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index ae9cc2f962..cc00b3b89b 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -1147,10 +1147,9 @@ void send_nibble(uint8_t number) { } } -uint8_t midi_buffer[16] = {0}; +uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0}; -void sysex_callback(MidiDevice * device, - uint16_t start, uint8_t length, uint8_t * data) { +void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { // for (int i = 0; i < length; i++) // midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); // if (start == 0x27) { @@ -1169,7 +1168,7 @@ void sysex_callback(MidiDevice * device, } -uint32_t decode_4byte_chunk(uint8_t * data) { +uint32_t decode_uint32_chunk(uint8_t * data) { uint32_t part1 = *data++; uint32_t part2 = *data++; uint32_t part3 = *data++; @@ -1178,7 +1177,13 @@ uint32_t decode_4byte_chunk(uint8_t * data) { return ((part1 & 0x1FUL) << 28) | (part2 << 21) | (part3 << 14) | (part4 << 7) | part5; } -void encode_4byte_chunk(uint32_t data, uint8_t * pointer) { +uint32_t decode_uint8_chunk(uint8_t * data) { + uint32_t part4 = *data++; + uint32_t part5 = *data++; + return (part4 << 7) | part5; +} + +void encode_uint32_chunk(uint32_t data, uint8_t * pointer) { *pointer++ = (data >> 28) & 0x7F; *pointer++ = (data >> 21) & 0x7F; *pointer++ = (data >> 14) & 0x7F; @@ -1186,6 +1191,11 @@ void encode_4byte_chunk(uint32_t data, uint8_t * pointer) { *pointer++ = (data) & 0x7F; } +void encode_uint8_chunk(uint8_t data, uint8_t * pointer) { + *pointer++ = (data >> 7) & 0x7F; + *pointer++ = (data) & 0x7F; +} + void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) { uint8_t * pointer_copy = data; @@ -1197,28 +1207,77 @@ void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) data++; switch (*data++) { + case 0x12: ; // Set info on keyboard + switch (*data++) { + case 0x02: ; // set default layer + uint8_t default_layer = decode_uint8_chunk(data); + eeconfig_update_default_layer(default_layer); + default_layer_set((uint32_t)default_layer); + break; + case 0x08: ; // set keymap options + uint8_t keymap_options = decode_uint8_chunk(data); + eeconfig_update_keymap(keymap_options); + break; + } + break; case 0x13: ; // Get info from keyboard switch (*data++) { - case 0x00: ; // Get layer state - // send_dword(layer_state); - uint8_t chunk[5]; - encode_4byte_chunk(layer_state | default_layer_state, &chunk); - - uint8_t array[] = {0xF0, 0x00, 0x00, 0x00, 0x00, chunk[0], chunk[1], chunk[2], chunk[3], chunk[4], 0xF7}; - midi_send_array(&midi_device, 11, &array); - // midi_send_data(device, 3, 0x00, layer_state >> 24 & 0x7f, layer_state >> 16 & 0x7f); - // midi_send_data(device, 6, layer_state >> 8 & 0x7f, layer_state & 0x7f, 0xF7); + case 0x00: ; // Handshake + send_bytes_sysex(0x00, NULL, 0); + break; + case 0x01: ; // Get debug state + uint8_t debug[2]; + encode_uint8_chunk(eeprom_read_byte(EECONFIG_DEBUG), &debug); + send_bytes_sysex(0x01, &debug, 2); + break; + case 0x02: ; // Get default layer + uint8_t default_layer[2]; + encode_uint8_chunk(eeprom_read_byte(EECONFIG_DEFAULT_LAYER), &default_layer); + send_bytes_sysex(0x02, &default_layer, 2); + break; + #ifdef AUDIO_ENABLE + case 0x03: ; // Get backlight state + uint8_t audio[2]; + encode_uint8_chunk(eeprom_read_byte(EECONFIG_AUDIO), &audio); + send_bytes_sysex(0x03, &audio, 2); + #endif + case 0x04: ; // Get layer state + uint8_t layers[5]; + encode_uint32_chunk(layer_state, &layers); + send_bytes_sysex(0x04, &layers, 5); + break; + #ifdef BACKLIGHT_ENABLE + case 0x06: ; // Get backlight state + uint8_t backlight[2]; + encode_uint8_chunk(eeprom_read_byte(EECONFIG_BACKLIGHT), &backlight); + send_bytes_sysex(0x06, &backlight, 2); + #endif + #ifdef RGBLIGHT_ENABLE + case 0x07: ; // Get rgblight state + uint8_t rgblight[2]; + encode_uint32_chunk(eeprom_read_dword(EECONFIG_RGBLIGHT), &rgblight); + send_bytes_sysex(0x07, &rgblight, 5); + #endif + case 0x08: ; // Keymap options + uint8_t keymap_options[2]; + encode_uint8_chunk(eeconfig_read_keymap(), &keymap_options); + send_bytes_sysex(0x08, &keymap_options, 2); break; } + break; #ifdef RGBLIGHT_ENABLE case 0x27: ; // RGB LED functions switch (*data++) { case 0x00: ; // Update HSV - uint32_t chunk = decode_4byte_chunk(data); - rgblight_sethsv(((chunk >> 16) & 0xFFFF) % 360, (chunk >> 8) & 0xFF, chunk & 0xFF); + uint32_t hsv = decode_uint32_chunk(data); + rgblight_sethsv(((hsv >> 16) & 0xFFFF) % 360, (hsv >> 8) & 0xFF, hsv & 0xFF); break; case 0x01: ; // Update RGB break; + case 0x02: ; // Update mode + uint8_t rgb_mode = decode_uint8_chunk(data); + rgblight_mode(rgb_mode); + break; } break; #endif @@ -1234,10 +1293,20 @@ void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) void send_unicode_midi(uint32_t unicode) { uint8_t chunk[5]; - encode_4byte_chunk(unicode, &chunk); + encode_uint32_chunk(unicode, &chunk); + send_bytes_sysex(0x05, &chunk, 5); +} - uint8_t array[] = {0xF0, 0x00, 0x00, 0x00, 0x05, chunk[0], chunk[1], chunk[2], chunk[3], chunk[4], 0xF7}; - midi_send_array(&midi_device, 11, &array); +void send_bytes_sysex(uint8_t type, uint8_t * bytes, uint8_t length) { + uint8_t * array = malloc(sizeof(uint8_t) * (length + 6)); + array[0] = 0xF0; + array[1] = 0x00; + array[2] = 0x00; + array[3] = 0x00; + array[4] = type; + array[length + 5] = 0xF7; + memcpy(array + 5, bytes, length); + midi_send_array(&midi_device, length + 6, array); } #endif diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h index 3fec797b6c..198964f901 100644 --- a/tmk_core/protocol/lufa/lufa.h +++ b/tmk_core/protocol/lufa/lufa.h @@ -68,9 +68,18 @@ typedef struct { } __attribute__ ((packed)) report_extra_t; #ifdef MIDI_ENABLE -void MIDI_Task(void); -MidiDevice midi_device; -void send_unicode_midi(uint32_t unicode); + #define MIDI_SYSEX_BUFFER 16 + void MIDI_Task(void); + MidiDevice midi_device; + + void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data); + uint32_t decode_uint32_chunk(uint8_t * data); + uint32_t decode_uint8_chunk(uint8_t * data); + void encode_uint32_chunk(uint32_t data, uint8_t * pointer); + void encode_uint8_chunk(uint8_t data, uint8_t * pointer); + void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data); + void send_unicode_midi(uint32_t unicode); + void send_bytes_sysex(uint8_t type, uint8_t * bytes, uint8_t length); #endif // #if LUFA_VERSION_INTEGER < 0x120730 From c1037b1dc060d14a09a59f697fefe2b5b91bf373 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 21 Nov 2016 18:05:06 -0500 Subject: [PATCH 040/124] working with helper, qmk_helper_windows@05b0105 --- keyboards/planck/keymaps/default/Makefile | 8 ++++---- keyboards/planck/keymaps/default/keymap.c | 4 ++-- tmk_core/protocol/lufa/lufa.c | 6 ++++++ 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/keyboards/planck/keymaps/default/Makefile b/keyboards/planck/keymaps/default/Makefile index 0f4953888d..267a087ea9 100644 --- a/keyboards/planck/keymaps/default/Makefile +++ b/keyboards/planck/keymaps/default/Makefile @@ -5,17 +5,17 @@ # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls +MIDI_ENABLE = yes # MIDI controls AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/planck/keymaps/default/keymap.c b/keyboards/planck/keymaps/default/keymap.c index 5f71ae7d19..ddbe4d7b27 100644 --- a/keyboards/planck/keymaps/default/keymap.c +++ b/keyboards/planck/keymaps/default/keymap.c @@ -107,7 +107,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = { {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, @@ -125,7 +125,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RAISE] = { {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index cc00b3b89b..35739e3211 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -1207,6 +1207,12 @@ void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) data++; switch (*data++) { + case 0x07: ; // Quantum action + break; + case 0x08: ; // Keyboard acion + break; + case 0x09: ; // User action + break; case 0x12: ; // Set info on keyboard switch (*data++) { case 0x02: ; // set default layer From 664c0a036b3d7c3ed39f4a7a78d97f4a9cc7d20c Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 21 Nov 2016 19:50:55 -0500 Subject: [PATCH 041/124] cleaning up new code --- quantum/light_ws2812.h | 2 +- quantum/quantum.c | 40 ++++++++++++++++ quantum/quantum.h | 5 ++ tmk_core/protocol/lufa/lufa.c | 90 +++++++++++------------------------ 4 files changed, 73 insertions(+), 64 deletions(-) diff --git a/quantum/light_ws2812.h b/quantum/light_ws2812.h index 0bef93d5ec..9498e550e9 100755 --- a/quantum/light_ws2812.h +++ b/quantum/light_ws2812.h @@ -16,7 +16,7 @@ #include #include //#include "ws2812_config.h" -#include "i2cmaster.h" +//#include "i2cmaster.h" #define LIGHT_I2C 1 #define LIGHT_I2C_ADDR 0x84 diff --git a/quantum/quantum.c b/quantum/quantum.c index 9fd9a6ef72..8b2fefef65 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -802,6 +802,46 @@ void backlight_set(uint8_t level) #endif // backlight +// Functions for spitting out values +// + +void send_dword(uint32_t number) { // this might not actually work + uint16_t word = (number >> 16); + send_word(word); + send_word(number & 0xFFFFUL); +} + +void send_word(uint16_t number) { + uint8_t byte = number >> 8; + send_byte(byte); + send_byte(number & 0xFF); +} + +void send_byte(uint8_t number) { + uint8_t nibble = number >> 4; + send_nibble(nibble); + send_nibble(number & 0xF); +} + +void send_nibble(uint8_t number) { + switch (number) { + case 0: + register_code(KC_0); + unregister_code(KC_0); + break; + case 1 ... 9: + register_code(KC_1 + (number - 1)); + unregister_code(KC_1 + (number - 1)); + break; + case 0xA ... 0xF: + register_code(KC_A + (number - 0xA)); + unregister_code(KC_A + (number - 0xA)); + break; + } +} + + + __attribute__ ((weak)) void led_set_user(uint8_t usb_led) { diff --git a/quantum/quantum.h b/quantum/quantum.h index 06a2e049dc..3d35f11fad 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -110,6 +110,11 @@ void breathing_speed_dec(uint8_t value); #endif #endif +void send_dword(uint32_t number); +void send_word(uint16_t number); +void send_byte(uint8_t number); +void send_nibble(uint8_t number); + void led_set_user(uint8_t usb_led); void led_set_kb(uint8_t usb_led); diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 35739e3211..14da3b8039 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -84,9 +84,9 @@ static uint8_t keyboard_led_stats = 0; static report_keyboard_t keyboard_report_sent; #ifdef MIDI_ENABLE -void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2); -void usb_get_midi(MidiDevice * device); -void midi_usb_init(MidiDevice * device); +static void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2); +static void usb_get_midi(MidiDevice * device); +static void midi_usb_init(MidiDevice * device); #endif /* Host driver */ @@ -714,7 +714,7 @@ int8_t sendchar(uint8_t c) ******************************************************************************/ #ifdef MIDI_ENABLE -void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) { +static void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) { MIDI_EventPacket_t event; event.Data1 = byte0; event.Data2 = byte1; @@ -774,7 +774,7 @@ void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byt USB_USBTask(); } -void usb_get_midi(MidiDevice * device) { +static void usb_get_midi(MidiDevice * device) { MIDI_EventPacket_t event; while (MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, &event)) { @@ -804,12 +804,12 @@ void usb_get_midi(MidiDevice * device) { USB_USBTask(); } -void midi_usb_init(MidiDevice * device){ +static void midi_usb_init(MidiDevice * device){ midi_device_init(device); midi_device_set_send_func(device, usb_send_func); midi_device_set_pre_input_process_func(device, usb_get_midi); - SetupHardware(); + // SetupHardware(); sei(); } @@ -1112,41 +1112,6 @@ void cc_callback(MidiDevice * device, #endif } -void send_dword(uint32_t number) { - uint16_t word = (number >> 16); - send_word(word); - send_word(number & 0xFFFFUL); -} - -void send_word(uint16_t number) { - uint8_t byte = number >> 8; - send_byte(byte); - send_byte(number & 0xFF); -} - -void send_byte(uint8_t number) { - uint8_t nibble = number >> 4; - send_nibble(nibble); - send_nibble(number & 0xF); -} - -void send_nibble(uint8_t number) { - switch (number) { - case 0: - register_code(KC_0); - unregister_code(KC_0); - break; - case 1 ... 9: - register_code(KC_1 + (number - 1)); - unregister_code(KC_1 + (number - 1)); - break; - case 0xA ... 0xF: - register_code(KC_A + (number - 0xA)); - unregister_code(KC_A + (number - 0xA)); - break; - } -} - uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0}; void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { @@ -1159,8 +1124,8 @@ void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t for (uint8_t place = 0; place < length; place++) { // send_byte(*data); midi_buffer[start + place] = *data; - if (*data == 0xF7) - sysex_buffer_callback(device, start + place, &midi_buffer); + if (*data == 0xF7 && midi_buffer[0] == 0xF0) + sysex_buffer_callback(device, start + place, midi_buffer); // SEND_STRING(" "); data++; } @@ -1197,10 +1162,9 @@ void encode_uint8_chunk(uint8_t data, uint8_t * pointer) { } void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) { - uint8_t * pointer_copy = data; + // uint8_t * pointer_copy = data; // use for debugging - if (*data++ != 0xF0) - return + //data++; // i'm 98% sure there's a better way to do this data++; data++; data++; @@ -1233,41 +1197,41 @@ void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) break; case 0x01: ; // Get debug state uint8_t debug[2]; - encode_uint8_chunk(eeprom_read_byte(EECONFIG_DEBUG), &debug); - send_bytes_sysex(0x01, &debug, 2); + encode_uint8_chunk(eeprom_read_byte(EECONFIG_DEBUG), debug); + send_bytes_sysex(0x01, debug, 2); break; case 0x02: ; // Get default layer uint8_t default_layer[2]; - encode_uint8_chunk(eeprom_read_byte(EECONFIG_DEFAULT_LAYER), &default_layer); - send_bytes_sysex(0x02, &default_layer, 2); + encode_uint8_chunk(eeprom_read_byte(EECONFIG_DEFAULT_LAYER), default_layer); + send_bytes_sysex(0x02, default_layer, 2); break; #ifdef AUDIO_ENABLE case 0x03: ; // Get backlight state uint8_t audio[2]; - encode_uint8_chunk(eeprom_read_byte(EECONFIG_AUDIO), &audio); - send_bytes_sysex(0x03, &audio, 2); + encode_uint8_chunk(eeprom_read_byte(EECONFIG_AUDIO), audio); + send_bytes_sysex(0x03, audio, 2); #endif case 0x04: ; // Get layer state uint8_t layers[5]; - encode_uint32_chunk(layer_state, &layers); - send_bytes_sysex(0x04, &layers, 5); + encode_uint32_chunk(layer_state, layers); + send_bytes_sysex(0x04, layers, 5); break; #ifdef BACKLIGHT_ENABLE case 0x06: ; // Get backlight state uint8_t backlight[2]; - encode_uint8_chunk(eeprom_read_byte(EECONFIG_BACKLIGHT), &backlight); - send_bytes_sysex(0x06, &backlight, 2); + encode_uint8_chunk(eeprom_read_byte(EECONFIG_BACKLIGHT), backlight); + send_bytes_sysex(0x06, backlight, 2); #endif #ifdef RGBLIGHT_ENABLE case 0x07: ; // Get rgblight state uint8_t rgblight[2]; - encode_uint32_chunk(eeprom_read_dword(EECONFIG_RGBLIGHT), &rgblight); - send_bytes_sysex(0x07, &rgblight, 5); + encode_uint32_chunk(eeprom_read_dword(EECONFIG_RGBLIGHT), rgblight); + send_bytes_sysex(0x07, rgblight, 5); #endif case 0x08: ; // Keymap options uint8_t keymap_options[2]; - encode_uint8_chunk(eeconfig_read_keymap(), &keymap_options); - send_bytes_sysex(0x08, &keymap_options, 2); + encode_uint8_chunk(eeconfig_read_keymap(), keymap_options); + send_bytes_sysex(0x08, keymap_options, 2); break; } break; @@ -1299,8 +1263,8 @@ void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) void send_unicode_midi(uint32_t unicode) { uint8_t chunk[5]; - encode_uint32_chunk(unicode, &chunk); - send_bytes_sysex(0x05, &chunk, 5); + encode_uint32_chunk(unicode, chunk); + send_bytes_sysex(0x05, chunk, 5); } void send_bytes_sysex(uint8_t type, uint8_t * bytes, uint8_t length) { From 6390033e8688550826a4bd3004a2e76568600657 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 21 Nov 2016 20:14:16 -0500 Subject: [PATCH 042/124] cleaning up midid --- quantum/config_common.h | 99 ++++++++++++++++++----------------- tmk_core/common/host_driver.h | 9 +++- tmk_core/protocol/lufa/lufa.c | 2 +- 3 files changed, 59 insertions(+), 51 deletions(-) diff --git a/quantum/config_common.h b/quantum/config_common.h index 8ed5f4a106..f3897dc2ce 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -5,55 +5,56 @@ #define COL2ROW 0 #define ROW2COL 1 /* I/O pins */ -#define B0 0x30 -#define B1 0x31 -#define B2 0x32 -#define B3 0x33 -#define B4 0x34 -#define B5 0x35 -#define B6 0x36 -#define B7 0x37 -#define C0 0x60 -#define C1 0x61 -#define C2 0x62 -#define C3 0x63 -#define C4 0x64 -#define C5 0x65 -#define C6 0x66 -#define C7 0x67 -#define D0 0x90 -#define D1 0x91 -#define D2 0x92 -#define D3 0x93 -#define D4 0x94 -#define D5 0x95 -#define D6 0x96 -#define D7 0x97 -#define E0 0xC0 -#define E1 0xC1 -#define E2 0xC2 -#define E3 0xC3 -#define E4 0xC4 -#define E5 0xC5 -#define E6 0xC6 -#define E7 0xC7 -#define F0 0xF0 -#define F1 0xF1 -#define F2 0xF2 -#define F3 0xF3 -#define F4 0xF4 -#define F5 0xF5 -#define F6 0xF6 -#define F7 0xF7 -#define A0 0x00 -#define A1 0x01 -#define A2 0x02 -#define A3 0x03 -#define A4 0x04 -#define A5 0x05 -#define A6 0x06 -#define A7 0x07 - +#ifndef F0 + #define B0 0x30 + #define B1 0x31 + #define B2 0x32 + #define B3 0x33 + #define B4 0x34 + #define B5 0x35 + #define B6 0x36 + #define B7 0x37 + #define C0 0x60 + #define C1 0x61 + #define C2 0x62 + #define C3 0x63 + #define C4 0x64 + #define C5 0x65 + #define C6 0x66 + #define C7 0x67 + #define D0 0x90 + #define D1 0x91 + #define D2 0x92 + #define D3 0x93 + #define D4 0x94 + #define D5 0x95 + #define D6 0x96 + #define D7 0x97 + #define E0 0xC0 + #define E1 0xC1 + #define E2 0xC2 + #define E3 0xC3 + #define E4 0xC4 + #define E5 0xC5 + #define E6 0xC6 + #define E7 0xC7 + #define F0 0xF0 + #define F1 0xF1 + #define F2 0xF2 + #define F3 0xF3 + #define F4 0xF4 + #define F5 0xF5 + #define F6 0xF6 + #define F7 0xF7 + #define A0 0x00 + #define A1 0x01 + #define A2 0x02 + #define A3 0x03 + #define A4 0x04 + #define A5 0x05 + #define A6 0x06 + #define A7 0x07 +#endif /* USART configuration */ #ifdef BLUETOOTH_ENABLE diff --git a/tmk_core/common/host_driver.h b/tmk_core/common/host_driver.h index edb9e5dd9c..588d1c0be8 100644 --- a/tmk_core/common/host_driver.h +++ b/tmk_core/common/host_driver.h @@ -20,7 +20,9 @@ along with this program. If not, see . #include #include "report.h" - +#ifdef MIDI_ENABLE + #include "midi.h" +#endif typedef struct { uint8_t (*keyboard_leds)(void); @@ -28,6 +30,11 @@ typedef struct { void (*send_mouse)(report_mouse_t *); void (*send_system)(uint16_t); void (*send_consumer)(uint16_t); +#ifdef MIDI_ENABLE + void (*usb_send_func)(MidiDevice *, uint16_t, uint8_t, uint8_t, uint8_t); + void (*usb_get_midi)(MidiDevice *); + void (*midi_usb_init)(MidiDevice *); +#endif } host_driver_t; #endif diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 14da3b8039..a33a16599e 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -1051,7 +1051,7 @@ int main(void) // MIDI_Task(); #endif -#ifdef RGBLIGHT_ENABLE +#ifdef RGBLIGHT_ANIMATIONS rgblight_task(); #endif From 06a2677b7eedbf58532fa1a673ba1277e756174d Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 21 Nov 2016 20:17:32 -0500 Subject: [PATCH 043/124] fix infinity --- keyboards/ergodox/config.h | 2 -- keyboards/ergodox/ez/config.h | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/ergodox/config.h b/keyboards/ergodox/config.h index 049c707a56..edc60caae1 100644 --- a/keyboards/ergodox/config.h +++ b/keyboards/ergodox/config.h @@ -1,8 +1,6 @@ #ifndef KEYBOARDS_ERGODOX_CONFIG_H_ #define KEYBOARDS_ERGODOX_CONFIG_H_ -#include "config_common.h" - #define MOUSEKEY_DELAY 100 #define MOUSEKEY_INTERVAL 20 #define MOUSEKEY_MAX_SPEED 3 diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index 084a044ee1..67a856e511 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -21,6 +21,8 @@ along with this program. If not, see . #include "../config.h" +#include "config_common.h" + /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x1307 From 2febf9b9f7d610fc2eca666a842272cb90a87919 Mon Sep 17 00:00:00 2001 From: h-youhei Date: Tue, 22 Nov 2016 20:40:12 +0900 Subject: [PATCH 044/124] Add japanese keymap --- quantum/keymap_extras/keymap_jp.h | 62 +++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 quantum/keymap_extras/keymap_jp.h diff --git a/quantum/keymap_extras/keymap_jp.h b/quantum/keymap_extras/keymap_jp.h new file mode 100644 index 0000000000..e81b5952e0 --- /dev/null +++ b/quantum/keymap_extras/keymap_jp.h @@ -0,0 +1,62 @@ +/* JP106-layout (Japanese Standard) + * + * For more information, see + * http://www2d.biglobe.ne.jp/~msyk/keyboard/layout/usbkeycode.html + * note: This website is written in Japanese. + */ + + +#ifndef KEYMAP_JP_H +#define KEYMAP_JP_H + + +#include "keymap.h" + + +#define JP_ZHTG KC_GRV // hankaku/zenkaku|kanzi +#define JP_YEN KC_INT3 // yen, | +#define JP_CIRC KC_EQL // ^, ~ +#define JP_AT KC_LBRC // @, ` +#define JP_LBRC KC_RBRC // [, { +#define JP_COLN KC_QUOT // :, * +#define JP_RBRC KC_NUHS // ], } +#define JP_BSLS KC_INT1 // \, _ +#define JP_MHEN KC_INT5 // muhenkan +#define JP_HENK KC_INT4 // henkan +#define JP_KANA KC_INT2 // katakana/hiragana|ro-mazi + + +//Aliases for shifted symbols +#define JP_DQT LSFT(KC_2) // " +#define JP_AMPR LSFT(KC_6) // & +#define JP_QUOT LSFT(KC_7) // ' +#define JP_LPRN LSFT(KC_8) // ( +#define JP_RPRN LSFT(KC_9) // ) +#define JP_EQL LSFT(KC_MINS) // = +#define JP_TILD LSFT(JP_CIRC) // ~ +#define JP_PIPE LSFT(JP_YEN) // | +#define JP_GRV LSFT(JP_AT) // ` +#define JP_LCBR LSFT(JP_LBRC) // { +#define JP_PLUS LSFT(KC_SCLN) // + +#define JP_ASTR LSFT(JP_COLN) // * +#define JP_RCBR LSFT(JP_RBRC) // } +#define JP_UNDS LSFT(JP_BSLS) // _ + + +// These symbols are correspond to US101-layout. +#define JP_MINS KC_MINS // - +#define JP_SCLN KC_SCLN // ; +#define JP_COMM KC_COMM // , +#define JP_DOT KC_DOT // . +#define JP_SLSH KC_SLSH // / +// shifted +#define JP_EXLM KC_EXLM // ! +#define JP_HASH KC_HASH // # +#define JP_DLR KC_DLR // $ +#define JP_PERC KC_PERC // % +#define JP_LT KC_LT // < +#define JP_GT KC_GT // > +#define JP_QUES KC_QUES // ? + + +#endif From d37becc0a9203c4c7d52aca6190b4b3d9fb69a59 Mon Sep 17 00:00:00 2001 From: PureSpider Date: Tue, 22 Nov 2016 22:12:57 +0100 Subject: [PATCH 045/124] Set backlight status to on if it's at maximum brightness already and the brightness increase keybind is used Before it was turned on but the status wasn't set to on, so you had to push the backlight toggle bind twice to turn it off again --- tmk_core/common/backlight.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tmk_core/common/backlight.c b/tmk_core/common/backlight.c index c9e8fd3fd2..0e0ad2d154 100644 --- a/tmk_core/common/backlight.c +++ b/tmk_core/common/backlight.c @@ -36,9 +36,9 @@ void backlight_increase(void) if(backlight_config.level < BACKLIGHT_LEVELS) { backlight_config.level++; - backlight_config.enable = 1; - eeconfig_update_backlight(backlight_config.raw); } + backlight_config.enable = 1; + eeconfig_update_backlight(backlight_config.raw); dprintf("backlight increase: %u\n", backlight_config.level); backlight_set(backlight_config.level); } From 5893f0fa1fcecfface25ce570f37e51031a14489 Mon Sep 17 00:00:00 2001 From: Wilba6582 Date: Wed, 23 Nov 2016 16:22:57 +1100 Subject: [PATCH 046/124] Fixed NO_SUSPEND_POWER_DOWN handling --- tmk_core/common/avr/suspend.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tmk_core/common/avr/suspend.c b/tmk_core/common/avr/suspend.c index 8a7272bbc5..939bda15eb 100644 --- a/tmk_core/common/avr/suspend.c +++ b/tmk_core/common/avr/suspend.c @@ -47,6 +47,7 @@ void suspend_idle(uint8_t time) sleep_disable(); } +#ifndef NO_SUSPEND_POWER_DOWN /* Power down MCU with watchdog timer * wdto: watchdog timer timeout defined in * WDTO_15MS @@ -61,6 +62,7 @@ void suspend_idle(uint8_t time) * WDTO_8S */ static uint8_t wdt_timeout = 0; + static void power_down(uint8_t wdto) { #ifdef PROTOCOL_LUFA @@ -98,10 +100,13 @@ static void power_down(uint8_t wdto) // Disable watchdog after sleep wdt_disable(); } +#endif void suspend_power_down(void) { +#ifndef NO_SUSPEND_POWER_DOWN power_down(WDTO_15MS); +#endif } __attribute__ ((weak)) void matrix_power_up(void) {} @@ -109,7 +114,9 @@ __attribute__ ((weak)) void matrix_power_down(void) {} bool suspend_wakeup_condition(void) { #ifdef BACKLIGHT_ENABLE +#ifndef NO_SUSPEND_POWER_DOWN backlight_set(0); +#endif #endif matrix_power_up(); matrix_scan(); @@ -126,7 +133,6 @@ void suspend_wakeup_init(void) // clear keyboard state clear_keyboard(); #ifdef BACKLIGHT_ENABLE - backlight_set(0); backlight_init(); #endif led_set(host_keyboard_leds()); From 3d7aaa31e41a9c96e785b0c089d74dfda525dfbe Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Wed, 23 Nov 2016 00:30:06 -0500 Subject: [PATCH 047/124] converted to 8bit messages --- Dockerfile | 3 +- tmk_core/protocol/lufa/lufa.c | 119 +++++++++++++++++++--------------- tmk_core/protocol/midi.mk | 1 + 3 files changed, 70 insertions(+), 53 deletions(-) diff --git a/Dockerfile b/Dockerfile index 744ded8579..c42bbeb32a 100644 --- a/Dockerfile +++ b/Dockerfile @@ -25,5 +25,4 @@ ENV subproject=ez ENV keymap=default VOLUME /qmk -WORKDIR /qmk -CMD make clean ; make keyboard=${keyboard} subproject=${subproject} keymap=${keymap} +WORKDIR /qmk \ No newline at end of file diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index a33a16599e..c4531c8d73 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -76,6 +76,10 @@ #include "rgblight.h" #endif +#ifdef MIDI_ENABLE + #include "sysex_tools.h" +#endif + uint8_t keyboard_idle = 0; /* 0: Boot Protocol, 1: Report Protocol(default) */ uint8_t keyboard_protocol = 1; @@ -1124,8 +1128,16 @@ void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t for (uint8_t place = 0; place < length; place++) { // send_byte(*data); midi_buffer[start + place] = *data; - if (*data == 0xF7 && midi_buffer[0] == 0xF0) - sysex_buffer_callback(device, start + place, midi_buffer); + if (*data == 0xF7) { + // SEND_STRING("\nRD: "); + // for (uint8_t i = 0; i < start + place + 1; i++){ + // send_byte(midi_buffer[i]); + // SEND_STRING(" "); + // } + uint8_t * decoded = malloc(sizeof(uint8_t) * (sysex_decoded_length(start + place - 4))); + uint16_t decode_length = sysex_decode(decoded, midi_buffer + 4, start + place - 4); + sysex_buffer_callback(device, decode_length, decoded); + } // SEND_STRING(" "); data++; } @@ -1161,32 +1173,35 @@ void encode_uint8_chunk(uint8_t data, uint8_t * pointer) { *pointer++ = (data) & 0x7F; } -void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) { - // uint8_t * pointer_copy = data; // use for debugging +void dword_to_bytes(uint8_t * bytes, uint32_t dword) { + bytes[0] = (dword >> 24) & 0xFF; + bytes[1] = (dword >> 16) & 0xFF; + bytes[2] = (dword >> 8) & 0xFF; + bytes[3] = (dword >> 0) & 0xFF; +} - //data++; // i'm 98% sure there's a better way to do this - data++; - data++; - data++; - data++; +void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) { + // SEND_STRING("\nRX: "); + // for (uint8_t i = 0; i < length; i++) { + // send_byte(data[i]); + // SEND_STRING(" "); + // } switch (*data++) { case 0x07: ; // Quantum action break; - case 0x08: ; // Keyboard acion + case 0x08: ; // Keyboard action break; case 0x09: ; // User action break; case 0x12: ; // Set info on keyboard switch (*data++) { case 0x02: ; // set default layer - uint8_t default_layer = decode_uint8_chunk(data); - eeconfig_update_default_layer(default_layer); - default_layer_set((uint32_t)default_layer); + eeconfig_update_default_layer(data[0] << 8 | data[1]); + default_layer_set((uint32_t)(data[0] << 8 | data[1])); break; case 0x08: ; // set keymap options - uint8_t keymap_options = decode_uint8_chunk(data); - eeconfig_update_keymap(keymap_options); + eeconfig_update_keymap(data[0]); break; } break; @@ -1196,42 +1211,37 @@ void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) send_bytes_sysex(0x00, NULL, 0); break; case 0x01: ; // Get debug state - uint8_t debug[2]; - encode_uint8_chunk(eeprom_read_byte(EECONFIG_DEBUG), debug); - send_bytes_sysex(0x01, debug, 2); + uint8_t debug_bytes[1] = { eeprom_read_byte(EECONFIG_DEBUG) }; + send_bytes_sysex(0x01, debug_bytes, 1); break; case 0x02: ; // Get default layer - uint8_t default_layer[2]; - encode_uint8_chunk(eeprom_read_byte(EECONFIG_DEFAULT_LAYER), default_layer); - send_bytes_sysex(0x02, default_layer, 2); + uint8_t default_bytes[1] = { eeprom_read_byte(EECONFIG_DEFAULT_LAYER) }; + send_bytes_sysex(0x02, default_bytes, 1); break; #ifdef AUDIO_ENABLE case 0x03: ; // Get backlight state - uint8_t audio[2]; - encode_uint8_chunk(eeprom_read_byte(EECONFIG_AUDIO), audio); - send_bytes_sysex(0x03, audio, 2); + uint8_t audio_bytes[1] = { eeprom_read_byte(EECONFIG_AUDIO) }; + send_bytes_sysex(0x03, audio_bytes, 1); #endif case 0x04: ; // Get layer state - uint8_t layers[5]; - encode_uint32_chunk(layer_state, layers); - send_bytes_sysex(0x04, layers, 5); + uint8_t layer_state_bytes[4]; + dword_to_bytes(layer_state_bytes, layer_state); + send_bytes_sysex(0x04, layer_state_bytes, 4); break; #ifdef BACKLIGHT_ENABLE case 0x06: ; // Get backlight state - uint8_t backlight[2]; - encode_uint8_chunk(eeprom_read_byte(EECONFIG_BACKLIGHT), backlight); - send_bytes_sysex(0x06, backlight, 2); + uint8_t backlight_bytes[1] = { eeprom_read_byte(EECONFIG_BACKLIGHT) }; + send_bytes_sysex(0x06, backlight_bytes, 1); #endif #ifdef RGBLIGHT_ENABLE case 0x07: ; // Get rgblight state - uint8_t rgblight[2]; - encode_uint32_chunk(eeprom_read_dword(EECONFIG_RGBLIGHT), rgblight); - send_bytes_sysex(0x07, rgblight, 5); + uint8_t rgblight_bytes[4]; + dword_to_bytes(rgblight_bytes, eeprom_read_dword(EECONFIG_RGBLIGHT)); + send_bytes_sysex(0x07, rgblight_bytes, 4); #endif case 0x08: ; // Keymap options - uint8_t keymap_options[2]; - encode_uint8_chunk(eeconfig_read_keymap(), keymap_options); - send_bytes_sysex(0x08, keymap_options, 2); + uint8_t keymap_bytes[1] = { eeconfig_read_keymap() }; + send_bytes_sysex(0x08, keymap_bytes, 1); break; } break; @@ -1239,26 +1249,18 @@ void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) case 0x27: ; // RGB LED functions switch (*data++) { case 0x00: ; // Update HSV - uint32_t hsv = decode_uint32_chunk(data); - rgblight_sethsv(((hsv >> 16) & 0xFFFF) % 360, (hsv >> 8) & 0xFF, hsv & 0xFF); + rgblight_sethsv((data[0] << 8 | data[1]) % 360, data[2], data[3]); break; case 0x01: ; // Update RGB break; case 0x02: ; // Update mode - uint8_t rgb_mode = decode_uint8_chunk(data); - rgblight_mode(rgb_mode); + rgblight_mode(data[0]); break; } break; #endif } - // SEND_STRING("\nDATA:\n"); - // while (*pointer_copy != 0xF7) { - // send_byte(*pointer_copy++); - // SEND_STRING(" "); - // } - } void send_unicode_midi(uint32_t unicode) { @@ -1268,15 +1270,30 @@ void send_unicode_midi(uint32_t unicode) { } void send_bytes_sysex(uint8_t type, uint8_t * bytes, uint8_t length) { - uint8_t * array = malloc(sizeof(uint8_t) * (length + 6)); + // SEND_STRING("\nTX: "); + // for (uint8_t i = 0; i < length; i++) { + // send_byte(bytes[i]); + // SEND_STRING(" "); + // } + uint8_t * precode = malloc(sizeof(uint8_t) * (length + 1)); + precode[0] = type; + memcpy(precode + 1, bytes, length); + uint8_t * encoded = malloc(sizeof(uint8_t) * (sysex_encoded_length(length + 1))); + uint16_t encoded_length = sysex_encode(encoded, precode, length + 1); + uint8_t * array = malloc(sizeof(uint8_t) * (encoded_length + 5)); array[0] = 0xF0; array[1] = 0x00; array[2] = 0x00; array[3] = 0x00; - array[4] = type; - array[length + 5] = 0xF7; - memcpy(array + 5, bytes, length); - midi_send_array(&midi_device, length + 6, array); + array[encoded_length + 4] = 0xF7; + memcpy(array + 4, encoded, encoded_length); + midi_send_array(&midi_device, encoded_length + 5, array); + + // SEND_STRING("\nTD: "); + // for (uint8_t i = 0; i < encoded_length + 5; i++) { + // send_byte(array[i]); + // SEND_STRING(" "); + // } } #endif diff --git a/tmk_core/protocol/midi.mk b/tmk_core/protocol/midi.mk index c85ae42ff2..4855b23d30 100644 --- a/tmk_core/protocol/midi.mk +++ b/tmk_core/protocol/midi.mk @@ -4,6 +4,7 @@ SRC += midi.c \ midi_device.c \ bytequeue/bytequeue.c \ bytequeue/interrupt_setting.c \ + sysex_tools.c \ $(LUFA_SRC_USBCLASS) VPATH += $(TMK_PATH)/$(MIDI_DIR) \ No newline at end of file From cf3926a8e13edb76193b8af25b497f9ef61161fd Mon Sep 17 00:00:00 2001 From: Wilba6582 Date: Wed, 23 Nov 2016 19:45:50 +1100 Subject: [PATCH 048/124] Fixed NO_SUSPEND_POWER_DOWN handling --- tmk_core/common/avr/suspend.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/tmk_core/common/avr/suspend.c b/tmk_core/common/avr/suspend.c index 939bda15eb..0c81e83612 100644 --- a/tmk_core/common/avr/suspend.c +++ b/tmk_core/common/avr/suspend.c @@ -113,11 +113,6 @@ __attribute__ ((weak)) void matrix_power_up(void) {} __attribute__ ((weak)) void matrix_power_down(void) {} bool suspend_wakeup_condition(void) { -#ifdef BACKLIGHT_ENABLE -#ifndef NO_SUSPEND_POWER_DOWN - backlight_set(0); -#endif -#endif matrix_power_up(); matrix_scan(); matrix_power_down(); @@ -135,7 +130,7 @@ void suspend_wakeup_init(void) #ifdef BACKLIGHT_ENABLE backlight_init(); #endif -led_set(host_keyboard_leds()); + led_set(host_keyboard_leds()); } #ifndef NO_SUSPEND_POWER_DOWN From 2e23689b8e3222982082c1f5a4f8ce7686f9658b Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Wed, 23 Nov 2016 18:52:02 -0500 Subject: [PATCH 049/124] converted to new format --- quantum/rgblight.c | 13 ++ quantum/rgblight.h | 1 + tmk_core/protocol/lufa/lufa.c | 291 +++++++++++++++++++++------------- tmk_core/protocol/lufa/lufa.h | 16 +- 4 files changed, 206 insertions(+), 115 deletions(-) diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 00620da58e..bb03d6e913 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -183,6 +183,19 @@ void rgblight_init(void) { } } +void rgblight_update_dword(uint32_t dword) { + rgblight_config.raw = dword; + eeconfig_update_rgblight(rgblight_config.raw); + if (rgblight_config.enable) + rgblight_mode(rgblight_config.mode); + else { + #ifdef RGBLIGHT_ANIMATIONS + rgblight_timer_disable(); + #endif + rgblight_set(); + } +} + void rgblight_increase(void) { uint8_t mode = 0; if (rgblight_config.mode < RGBLIGHT_MODES) { diff --git a/quantum/rgblight.h b/quantum/rgblight.h index a3673348e7..28a410e480 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -65,6 +65,7 @@ void rgblight_enable(void); void rgblight_step(void); void rgblight_mode(uint8_t mode); void rgblight_set(void); +void rgblight_update_dword(uint32_t dword); void rgblight_increase_hue(void); void rgblight_decrease_hue(void); void rgblight_increase_sat(void); diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index c4531c8d73..c3234b8ce5 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -1145,39 +1145,96 @@ void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t } -uint32_t decode_uint32_chunk(uint8_t * data) { - uint32_t part1 = *data++; - uint32_t part2 = *data++; - uint32_t part3 = *data++; - uint32_t part4 = *data++; - uint32_t part5 = *data++; - return ((part1 & 0x1FUL) << 28) | (part2 << 21) | (part3 << 14) | (part4 << 7) | part5; +void dword_to_bytes(uint32_t dword, uint8_t * bytes) { + bytes[0] = (dword >> 24) & 0xFF; + bytes[1] = (dword >> 16) & 0xFF; + bytes[2] = (dword >> 8) & 0xFF; + bytes[3] = (dword >> 0) & 0xFF; } -uint32_t decode_uint8_chunk(uint8_t * data) { - uint32_t part4 = *data++; - uint32_t part5 = *data++; - return (part4 << 7) | part5; +uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index) { + return ((uint32_t)bytes[index + 0] << 24) | ((uint32_t)bytes[index + 1] << 16) | ((uint32_t)bytes[index + 2] << 8) | (uint32_t)bytes[index + 3]; } -void encode_uint32_chunk(uint32_t data, uint8_t * pointer) { - *pointer++ = (data >> 28) & 0x7F; - *pointer++ = (data >> 21) & 0x7F; - *pointer++ = (data >> 14) & 0x7F; - *pointer++ = (data >> 7) & 0x7F; - *pointer++ = (data) & 0x7F; +enum MESSAGE_TYPE { + MT_GET_DATA = 0x10, // Get data from keyboard + MT_GET_DATA_ACK = 0x11, // returned data to process (ACK) + MT_SET_DATA = 0x20, // Set data on keyboard + MT_SET_DATA_ACK = 0x21, // returned data to confirm (ACK) + MT_SEND_DATA = 0x30, // Sending data/action from keyboard + MT_SEND_DATA_ACK = 0x31, // returned data/action confirmation (ACK) + MT_EXE_ACTION = 0x40, // executing actions on keyboard + MT_EXE_ACTION_ACK =0x41, // return confirmation/value (ACK) + MT_TYPE_ERROR = 0x80 // type not recofgnised (ACK) +}; + +enum DATA_TYPE { + DT_NONE = 0x00, + DT_HANDSHAKE, + DT_DEFAULT_LAYER, + DT_CURRENT_LAYER, + DT_KEYMAP_OPTIONS, + DT_BACKLIGHT, + DT_RGBLIGHT, + DT_UNICODE, + DT_DEBUG, + DT_AUDIO, + DT_QUANTUM_ACTION, + DT_KEYBOARD_ACTION, + DT_USER_ACTION, + +}; + +void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint8_t length) { + // SEND_STRING("\nTX: "); + // for (uint8_t i = 0; i < length; i++) { + // send_byte(bytes[i]); + // SEND_STRING(" "); + // } + uint8_t * precode = malloc(sizeof(uint8_t) * (length + 2)); + precode[0] = message_type; + precode[1] = data_type; + memcpy(precode + 2, bytes, length); + uint8_t * encoded = malloc(sizeof(uint8_t) * (sysex_encoded_length(length + 2))); + uint16_t encoded_length = sysex_encode(encoded, precode, length + 2); + uint8_t * array = malloc(sizeof(uint8_t) * (encoded_length + 5)); + array[0] = 0xF0; + array[1] = 0x00; + array[2] = 0x00; + array[3] = 0x00; + array[encoded_length + 4] = 0xF7; + memcpy(array + 4, encoded, encoded_length); + midi_send_array(&midi_device, encoded_length + 5, array); + + // SEND_STRING("\nTD: "); + // for (uint8_t i = 0; i < encoded_length + 5; i++) { + // send_byte(array[i]); + // SEND_STRING(" "); + // } } -void encode_uint8_chunk(uint8_t data, uint8_t * pointer) { - *pointer++ = (data >> 7) & 0x7F; - *pointer++ = (data) & 0x7F; +#define MT_GET_DATA(data_type, data, length) send_bytes_sysex(MT_GET_DATA, data_type, data, length) +#define MT_GET_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_GET_DATA_ACK, data_type, data, length) +#define MT_SET_DATA(data_type, data, length) send_bytes_sysex(MT_SET_DATA, data_type, data, length) +#define MT_SET_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_SET_DATA_ACK, data_type, data, length) +#define MT_SEND_DATA(data_type, data, length) send_bytes_sysex(MT_SEND_DATA, data_type, data, length) +#define MT_SEND_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_SEND_DATA_ACK, data_type, data, length) +#define MT_EXE_ACTION(data_type, data, length) send_bytes_sysex(MT_EXE_ACTION, data_type, data, length) +#define MT_EXE_ACTION_ACK(data_type, data, length) send_bytes_sysex(MT_EXE_ACTION_ACK, data_type, data, length) + +__attribute__ ((weak)) +bool sysex_process_quantum(uint8_t length, uint8_t * data) { + return sysex_process_keyboard(length, data); } -void dword_to_bytes(uint8_t * bytes, uint32_t dword) { - bytes[0] = (dword >> 24) & 0xFF; - bytes[1] = (dword >> 16) & 0xFF; - bytes[2] = (dword >> 8) & 0xFF; - bytes[3] = (dword >> 0) & 0xFF; +__attribute__ ((weak)) +bool sysex_process_keyboard(uint8_t length, uint8_t * data) { + return sysex_process_user(length, data); +} + +__attribute__ ((weak)) +bool sysex_process_user(uint8_t length, uint8_t * data) { + return true; } void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) { @@ -1186,114 +1243,128 @@ void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) // send_byte(data[i]); // SEND_STRING(" "); // } + if (!sysex_process_quantum(length, data)) + return; - switch (*data++) { - case 0x07: ; // Quantum action - break; - case 0x08: ; // Keyboard action - break; - case 0x09: ; // User action - break; - case 0x12: ; // Set info on keyboard - switch (*data++) { - case 0x02: ; // set default layer - eeconfig_update_default_layer(data[0] << 8 | data[1]); - default_layer_set((uint32_t)(data[0] << 8 | data[1])); + switch (data[0]) { + case MT_SET_DATA: + switch (data[1]) { + case DT_DEFAULT_LAYER: { + eeconfig_update_default_layer(data[2]); + default_layer_set((uint32_t)(data[2])); break; - case 0x08: ; // set keymap options - eeconfig_update_keymap(data[0]); + } + case DT_KEYMAP_OPTIONS: { + eeconfig_update_keymap(data[2]); + break; + } + case DT_RGBLIGHT: { + #ifdef RGBLIGHT_ENABLE + uint32_t rgblight = bytes_to_dword(data, 2); + rgblight_update_dword(rgblight); + #endif break; + } } - break; - case 0x13: ; // Get info from keyboard - switch (*data++) { - case 0x00: ; // Handshake - send_bytes_sysex(0x00, NULL, 0); + case MT_GET_DATA: + switch (data[1]) { + case DT_HANDSHAKE: { + MT_GET_DATA_ACK(DT_HANDSHAKE, NULL, 0); break; - case 0x01: ; // Get debug state + } + case DT_DEBUG: { uint8_t debug_bytes[1] = { eeprom_read_byte(EECONFIG_DEBUG) }; - send_bytes_sysex(0x01, debug_bytes, 1); + MT_GET_DATA_ACK(DT_DEBUG, debug_bytes, 1); break; - case 0x02: ; // Get default layer + } + case DT_DEFAULT_LAYER: { uint8_t default_bytes[1] = { eeprom_read_byte(EECONFIG_DEFAULT_LAYER) }; - send_bytes_sysex(0x02, default_bytes, 1); + MT_GET_DATA_ACK(DT_DEFAULT_LAYER, default_bytes, 1); break; - #ifdef AUDIO_ENABLE - case 0x03: ; // Get backlight state - uint8_t audio_bytes[1] = { eeprom_read_byte(EECONFIG_AUDIO) }; - send_bytes_sysex(0x03, audio_bytes, 1); - #endif - case 0x04: ; // Get layer state + } + case DT_CURRENT_LAYER: { uint8_t layer_state_bytes[4]; - dword_to_bytes(layer_state_bytes, layer_state); - send_bytes_sysex(0x04, layer_state_bytes, 4); + dword_to_bytes(layer_state, layer_state_bytes); + MT_GET_DATA_ACK(DT_CURRENT_LAYER, layer_state_bytes, 4); break; - #ifdef BACKLIGHT_ENABLE - case 0x06: ; // Get backlight state - uint8_t backlight_bytes[1] = { eeprom_read_byte(EECONFIG_BACKLIGHT) }; - send_bytes_sysex(0x06, backlight_bytes, 1); - #endif - #ifdef RGBLIGHT_ENABLE - case 0x07: ; // Get rgblight state - uint8_t rgblight_bytes[4]; - dword_to_bytes(rgblight_bytes, eeprom_read_dword(EECONFIG_RGBLIGHT)); - send_bytes_sysex(0x07, rgblight_bytes, 4); - #endif - case 0x08: ; // Keymap options - uint8_t keymap_bytes[1] = { eeconfig_read_keymap() }; - send_bytes_sysex(0x08, keymap_bytes, 1); + } + case DT_AUDIO: { + #ifdef AUDIO_ENABLE + uint8_t audio_bytes[1] = { eeprom_read_byte(EECONFIG_AUDIO) }; + MT_GET_DATA_ACK(DT_AUDIO, audio_bytes, 1); + #else + MT_GET_DATA_ACK(DT_AUDIO, NULL, 0); + #endif break; - } - break; - #ifdef RGBLIGHT_ENABLE - case 0x27: ; // RGB LED functions - switch (*data++) { - case 0x00: ; // Update HSV - rgblight_sethsv((data[0] << 8 | data[1]) % 360, data[2], data[3]); + } + case DT_BACKLIGHT: { + #ifdef BACKLIGHT_ENABLE + uint8_t backlight_bytes[1] = { eeprom_read_byte(EECONFIG_BACKLIGHT) }; + MT_GET_DATA_ACK(DT_BACKLIGHT, backlight_bytes, 1); + #else + MT_GET_DATA_ACK(DT_BACKLIGHT, NULL, 0); + #endif break; - case 0x01: ; // Update RGB + } + case DT_RGBLIGHT: { + #ifdef RGBLIGHT_ENABLE + uint8_t rgblight_bytes[4]; + dword_to_bytes(eeconfig_read_rgblight(), rgblight_bytes); + MT_GET_DATA_ACK(DT_RGBLIGHT, rgblight_bytes, 4); + #else + MT_GET_DATA_ACK(DT_RGBLIGHT, NULL, 0) + #endif break; - case 0x02: ; // Update mode - rgblight_mode(data[0]); + } + case DT_KEYMAP_OPTIONS: { + uint8_t keymap_bytes[1] = { eeconfig_read_keymap() }; + MT_GET_DATA_ACK(DT_KEYMAP_OPTIONS, keymap_bytes, 1); + break; + } + default: break; } break; - #endif + case MT_SET_DATA_ACK: + case MT_GET_DATA_ACK: + break; + case MT_SEND_DATA: + break; + case MT_SEND_DATA_ACK: + break; + case MT_EXE_ACTION: + break; + case MT_EXE_ACTION_ACK: + break; + case MT_TYPE_ERROR: + break; + default: ; // command not recognised + send_bytes_sysex(MT_TYPE_ERROR, DT_NONE, data, length); + break; + + // #ifdef RGBLIGHT_ENABLE + // case 0x27: ; // RGB LED functions + // switch (*data++) { + // case 0x00: ; // Update HSV + // rgblight_sethsv((data[0] << 8 | data[1]) % 360, data[2], data[3]); + // break; + // case 0x01: ; // Update RGB + // break; + // case 0x02: ; // Update mode + // rgblight_mode(data[0]); + // break; + // } + // break; + // #endif } } void send_unicode_midi(uint32_t unicode) { - uint8_t chunk[5]; - encode_uint32_chunk(unicode, chunk); - send_bytes_sysex(0x05, chunk, 5); + uint8_t chunk[4]; + dword_to_bytes(unicode, chunk); + MT_SEND_DATA(DT_UNICODE, chunk, 5); } -void send_bytes_sysex(uint8_t type, uint8_t * bytes, uint8_t length) { - // SEND_STRING("\nTX: "); - // for (uint8_t i = 0; i < length; i++) { - // send_byte(bytes[i]); - // SEND_STRING(" "); - // } - uint8_t * precode = malloc(sizeof(uint8_t) * (length + 1)); - precode[0] = type; - memcpy(precode + 1, bytes, length); - uint8_t * encoded = malloc(sizeof(uint8_t) * (sysex_encoded_length(length + 1))); - uint16_t encoded_length = sysex_encode(encoded, precode, length + 1); - uint8_t * array = malloc(sizeof(uint8_t) * (encoded_length + 5)); - array[0] = 0xF0; - array[1] = 0x00; - array[2] = 0x00; - array[3] = 0x00; - array[encoded_length + 4] = 0xF7; - memcpy(array + 4, encoded, encoded_length); - midi_send_array(&midi_device, encoded_length + 5, array); - - // SEND_STRING("\nTD: "); - // for (uint8_t i = 0; i < encoded_length + 5; i++) { - // send_byte(array[i]); - // SEND_STRING(" "); - // } -} #endif diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h index 198964f901..99b089f42b 100644 --- a/tmk_core/protocol/lufa/lufa.h +++ b/tmk_core/protocol/lufa/lufa.h @@ -73,13 +73,19 @@ typedef struct { MidiDevice midi_device; void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data); - uint32_t decode_uint32_chunk(uint8_t * data); - uint32_t decode_uint8_chunk(uint8_t * data); - void encode_uint32_chunk(uint32_t data, uint8_t * pointer); - void encode_uint8_chunk(uint8_t data, uint8_t * pointer); void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data); void send_unicode_midi(uint32_t unicode); - void send_bytes_sysex(uint8_t type, uint8_t * bytes, uint8_t length); + void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint8_t length); + + __attribute__ ((weak)) + bool sysex_process_quantum(uint8_t length, uint8_t * data); + + __attribute__ ((weak)) + bool sysex_process_keyboard(uint8_t length, uint8_t * data); + + __attribute__ ((weak)) + bool sysex_process_user(uint8_t length, uint8_t * data); + #endif // #if LUFA_VERSION_INTEGER < 0x120730 From cefa8468fb5f28bd67a0c02d371a4aef0964e20c Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Wed, 23 Nov 2016 20:16:38 -0500 Subject: [PATCH 050/124] travis pls --- keyboards/ergodox/infinity/rules.mk | 2 + keyboards/ergodox/keymaps/jack/Makefile | 4 +- quantum/quantum.c | 9 ++++- quantum/quantum.h | 2 + tmk_core/protocol/lufa/lufa.c | 49 +------------------------ tmk_core/protocol/lufa/lufa.h | 42 ++++++++++++++++++++- 6 files changed, 56 insertions(+), 52 deletions(-) diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk index ccb735a485..473a6dfec6 100644 --- a/keyboards/ergodox/infinity/rules.mk +++ b/keyboards/ergodox/infinity/rules.mk @@ -63,6 +63,8 @@ VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile LCD_ENABLE ?= yes LED_ENABLE ?= yes LCD_BACKLIGHT_ENABLE ?= yes +MIDI_ENABLE = no +RGBLIGHT_ENABLE = no ifndef QUANTUM_DIR include ../../../Makefile diff --git a/keyboards/ergodox/keymaps/jack/Makefile b/keyboards/ergodox/keymaps/jack/Makefile index 7c257af501..3ca69bb923 100644 --- a/keyboards/ergodox/keymaps/jack/Makefile +++ b/keyboards/ergodox/keymaps/jack/Makefile @@ -1,5 +1,5 @@ -RGBLIGHT_ENABLE = yes -MIDI_ENABLE = yes +RGBLIGHT_ENABLE ?= yes +MIDI_ENABLE ?= yes ifndef QUANTUM_DIR include ../../../../Makefile diff --git a/quantum/quantum.c b/quantum/quantum.c index f9f1ef22d0..8372a7adc5 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -847,8 +847,13 @@ void send_nibble(uint8_t number) { } } - - +void send_unicode_midi(uint32_t unicode) { + #ifdef MIDI_ENABLE + uint8_t chunk[4]; + dword_to_bytes(unicode, chunk); + MT_SEND_DATA(DT_UNICODE, chunk, 5); + #endif +} __attribute__ ((weak)) void led_set_user(uint8_t usb_led) { diff --git a/quantum/quantum.h b/quantum/quantum.h index 3d35f11fad..316da15b9a 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -119,4 +119,6 @@ void send_nibble(uint8_t number); void led_set_user(uint8_t usb_led); void led_set_kb(uint8_t usb_led); +void send_unicode_midi(uint32_t unicode); + #endif diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index c3234b8ce5..eae3e8f298 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -72,7 +72,7 @@ #include "virtser.h" #endif -#ifdef RGB_MIDI +#if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE) #include "rgblight.h" #endif @@ -1156,35 +1156,6 @@ uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index) { return ((uint32_t)bytes[index + 0] << 24) | ((uint32_t)bytes[index + 1] << 16) | ((uint32_t)bytes[index + 2] << 8) | (uint32_t)bytes[index + 3]; } -enum MESSAGE_TYPE { - MT_GET_DATA = 0x10, // Get data from keyboard - MT_GET_DATA_ACK = 0x11, // returned data to process (ACK) - MT_SET_DATA = 0x20, // Set data on keyboard - MT_SET_DATA_ACK = 0x21, // returned data to confirm (ACK) - MT_SEND_DATA = 0x30, // Sending data/action from keyboard - MT_SEND_DATA_ACK = 0x31, // returned data/action confirmation (ACK) - MT_EXE_ACTION = 0x40, // executing actions on keyboard - MT_EXE_ACTION_ACK =0x41, // return confirmation/value (ACK) - MT_TYPE_ERROR = 0x80 // type not recofgnised (ACK) -}; - -enum DATA_TYPE { - DT_NONE = 0x00, - DT_HANDSHAKE, - DT_DEFAULT_LAYER, - DT_CURRENT_LAYER, - DT_KEYMAP_OPTIONS, - DT_BACKLIGHT, - DT_RGBLIGHT, - DT_UNICODE, - DT_DEBUG, - DT_AUDIO, - DT_QUANTUM_ACTION, - DT_KEYBOARD_ACTION, - DT_USER_ACTION, - -}; - void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint8_t length) { // SEND_STRING("\nTX: "); // for (uint8_t i = 0; i < length; i++) { @@ -1213,15 +1184,6 @@ void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, // } } -#define MT_GET_DATA(data_type, data, length) send_bytes_sysex(MT_GET_DATA, data_type, data, length) -#define MT_GET_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_GET_DATA_ACK, data_type, data, length) -#define MT_SET_DATA(data_type, data, length) send_bytes_sysex(MT_SET_DATA, data_type, data, length) -#define MT_SET_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_SET_DATA_ACK, data_type, data, length) -#define MT_SEND_DATA(data_type, data, length) send_bytes_sysex(MT_SEND_DATA, data_type, data, length) -#define MT_SEND_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_SEND_DATA_ACK, data_type, data, length) -#define MT_EXE_ACTION(data_type, data, length) send_bytes_sysex(MT_EXE_ACTION, data_type, data, length) -#define MT_EXE_ACTION_ACK(data_type, data, length) send_bytes_sysex(MT_EXE_ACTION_ACK, data_type, data, length) - __attribute__ ((weak)) bool sysex_process_quantum(uint8_t length, uint8_t * data) { return sysex_process_keyboard(length, data); @@ -1312,7 +1274,7 @@ void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) dword_to_bytes(eeconfig_read_rgblight(), rgblight_bytes); MT_GET_DATA_ACK(DT_RGBLIGHT, rgblight_bytes, 4); #else - MT_GET_DATA_ACK(DT_RGBLIGHT, NULL, 0) + MT_GET_DATA_ACK(DT_RGBLIGHT, NULL, 0); #endif break; } @@ -1360,11 +1322,4 @@ void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) } -void send_unicode_midi(uint32_t unicode) { - uint8_t chunk[4]; - dword_to_bytes(unicode, chunk); - MT_SEND_DATA(DT_UNICODE, chunk, 5); -} - - #endif diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h index 99b089f42b..0962dda8d8 100644 --- a/tmk_core/protocol/lufa/lufa.h +++ b/tmk_core/protocol/lufa/lufa.h @@ -74,8 +74,9 @@ typedef struct { void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data); void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data); - void send_unicode_midi(uint32_t unicode); void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint8_t length); + void dword_to_bytes(uint32_t dword, uint8_t * bytes); + uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index); __attribute__ ((weak)) bool sysex_process_quantum(uint8_t length, uint8_t * data); @@ -86,6 +87,45 @@ typedef struct { __attribute__ ((weak)) bool sysex_process_user(uint8_t length, uint8_t * data); + enum MESSAGE_TYPE { + MT_GET_DATA = 0x10, // Get data from keyboard + MT_GET_DATA_ACK = 0x11, // returned data to process (ACK) + MT_SET_DATA = 0x20, // Set data on keyboard + MT_SET_DATA_ACK = 0x21, // returned data to confirm (ACK) + MT_SEND_DATA = 0x30, // Sending data/action from keyboard + MT_SEND_DATA_ACK = 0x31, // returned data/action confirmation (ACK) + MT_EXE_ACTION = 0x40, // executing actions on keyboard + MT_EXE_ACTION_ACK =0x41, // return confirmation/value (ACK) + MT_TYPE_ERROR = 0x80 // type not recofgnised (ACK) + }; + + enum DATA_TYPE { + DT_NONE = 0x00, + DT_HANDSHAKE, + DT_DEFAULT_LAYER, + DT_CURRENT_LAYER, + DT_KEYMAP_OPTIONS, + DT_BACKLIGHT, + DT_RGBLIGHT, + DT_UNICODE, + DT_DEBUG, + DT_AUDIO, + DT_QUANTUM_ACTION, + DT_KEYBOARD_ACTION, + DT_USER_ACTION, + + }; + + + #define MT_GET_DATA(data_type, data, length) send_bytes_sysex(MT_GET_DATA, data_type, data, length) + #define MT_GET_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_GET_DATA_ACK, data_type, data, length) + #define MT_SET_DATA(data_type, data, length) send_bytes_sysex(MT_SET_DATA, data_type, data, length) + #define MT_SET_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_SET_DATA_ACK, data_type, data, length) + #define MT_SEND_DATA(data_type, data, length) send_bytes_sysex(MT_SEND_DATA, data_type, data, length) + #define MT_SEND_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_SEND_DATA_ACK, data_type, data, length) + #define MT_EXE_ACTION(data_type, data, length) send_bytes_sysex(MT_EXE_ACTION, data_type, data, length) + #define MT_EXE_ACTION_ACK(data_type, data, length) send_bytes_sysex(MT_EXE_ACTION_ACK, data_type, data, length) + #endif // #if LUFA_VERSION_INTEGER < 0x120730 From f25596b8dc2f15f620c07164d871023d9284618c Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Wed, 23 Nov 2016 21:28:12 -0500 Subject: [PATCH 051/124] rgblight fixes --- keyboards/ergodox/keymaps/erez_experimental/Makefile | 4 ++-- keyboards/ergodox/keymaps/erez_experimental/keymap.c | 8 +++++--- tmk_core/protocol/lufa/lufa.c | 2 +- 3 files changed, 8 insertions(+), 6 deletions(-) diff --git a/keyboards/ergodox/keymaps/erez_experimental/Makefile b/keyboards/ergodox/keymaps/erez_experimental/Makefile index dbe89d1410..51a0c74c54 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/Makefile +++ b/keyboards/ergodox/keymaps/erez_experimental/Makefile @@ -3,8 +3,8 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend COMMAND_ENABLE = no # Commands for debug and configuration -RGBLIGHT_ENABLE = yes -MIDI_ENABLE = yes +RGBLIGHT_ENABLE ?= yes +MIDI_ENABLE ?= yes ifndef QUANTUM_DIR include ../../../../Makefile diff --git a/keyboards/ergodox/keymaps/erez_experimental/keymap.c b/keyboards/ergodox/keymaps/erez_experimental/keymap.c index 4a23c7ac58..0c0e3c4e39 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/keymap.c +++ b/keyboards/ergodox/keymaps/erez_experimental/keymap.c @@ -164,9 +164,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { // dynamically generate these. case RGB_FF00BB: if (record->event.pressed) { - rgblight_enable(); - rgblight_mode(1); - rgblight_setrgb(0xff,0x00,0xbb); + #ifdef RGBLIGHT_ENABLE + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(0xff,0x00,0xbb); + #endif } return false; break; diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index eae3e8f298..aa2e781c80 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -1055,7 +1055,7 @@ int main(void) // MIDI_Task(); #endif -#ifdef RGBLIGHT_ANIMATIONS +#if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE) rgblight_task(); #endif From 3be13d1ffb43216aff1300cdce79512559bdde7c Mon Sep 17 00:00:00 2001 From: ofples Date: Fri, 25 Nov 2016 09:15:12 +0200 Subject: [PATCH 052/124] Added protocol.mk to build --- build_keyboard.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/build_keyboard.mk b/build_keyboard.mk index 61aebf3935..055ce632ae 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -199,6 +199,7 @@ endif VPATH += $(KEYBOARD_PATH) VPATH += $(COMMON_VPATH) +include $(TMK_PATH)/protocol.mk include $(TMK_PATH)/common.mk SRC += $(TMK_COMMON_SRC) From 03d6e165bb0baf9d0093250d3c3c0771290df4d6 Mon Sep 17 00:00:00 2001 From: ofples Date: Fri, 25 Nov 2016 09:17:40 +0200 Subject: [PATCH 053/124] Added missing endif for ifdef __AVR_ATmega32U4__ and removed the unnecessary one at the end of the file --- quantum/config_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/quantum/config_common.h b/quantum/config_common.h index 8ed5f4a106..443473292d 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -76,6 +76,7 @@ } while(0) # else # error "USART configuration is needed." +# endif #endif // I'm fairly sure these aren't needed, but oh well - Jack @@ -125,4 +126,3 @@ #endif -#endif From 0c9d66eb59add717397ba83d508577073412ce86 Mon Sep 17 00:00:00 2001 From: ofples Date: Fri, 25 Nov 2016 09:20:41 +0200 Subject: [PATCH 054/124] Removed comment --- quantum/config_common.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/quantum/config_common.h b/quantum/config_common.h index 443473292d..6b525fe1c6 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -79,8 +79,6 @@ # endif #endif -// I'm fairly sure these aren't needed, but oh well - Jack - /* * PS/2 Interrupt configuration */ From 97e7486d4c8818f4a6b3e619729d6f4f6524a7d1 Mon Sep 17 00:00:00 2001 From: ofples Date: Fri, 25 Nov 2016 12:10:44 +0200 Subject: [PATCH 055/124] Added documentation for PS/2 mouse in readme --- readme.md | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/readme.md b/readme.md index 8615b48d55..0157b90724 100644 --- a/readme.md +++ b/readme.md @@ -1157,6 +1157,45 @@ The firmware supports 5 different light effects, and the color (hue, saturation, Please note the USB port can only supply a limited amount of power to the keyboard (500mA by standard, however, modern computer and most usb hubs can provide 700+mA.). According to the data of NeoPixel from Adafruit, 30 WS2812 LEDs require a 5V 1A power supply, LEDs used in this mod should not more than 20. +## PS/2 Mouse Support + +Its possible to hook up a PS/2 mouse (for example touchpads or trackpoints) to your keyboard as a composite device. +In order to do this you must first enable the option in your Makefile. + + PS2_MOUSE_ENABLE = yes + +Then, decide whether to use interrupts (better if your microcontroller supports them) or busywait, and enable the relevant option. + + PS2_USE_INT = yes + // PS2_USE_BUSYWAIT = yes + +If you're using a teensy and have hooked up the clock on your PS/2 device to D1 and the data to D0, you're all set. +Otherwise, you will need to update the following defines in your `config.h`: + + #define PS2_CLOCK_PORT PORTD + #define PS2_CLOCK_PIN PIND + #define PS2_CLOCK_DDR DDRD + #define PS2_CLOCK_BIT 1 + + #define PS2_DATA_PORT PORTD + #define PS2_DATA_PIN PIND + #define PS2_DATA_DDR DDRD + #define PS2_DATA_BIT 0 + +And with `PS2_USE_INT` also define these macros: + + #define PS2_INT_INIT() do { \ + EICRA |= ((1< Date: Sat, 26 Nov 2016 13:11:40 +0700 Subject: [PATCH 056/124] My Promethium keyboard firmware --- keyboards/handwired/promethium/Makefile | 3 + keyboards/handwired/promethium/config.h | 164 ++++ .../promethium/keymaps/priyadi/Makefile | 28 + .../promethium/keymaps/priyadi/config.h | 17 + .../promethium/keymaps/priyadi/flash.sh | 3 + .../promethium/keymaps/priyadi/keymap.c | 725 ++++++++++++++++++ .../promethium/keymaps/priyadi/readme.md | 0 .../handwired/promethium/keymaps/readme.md | 22 + keyboards/handwired/promethium/promethium.c | 6 + keyboards/handwired/promethium/promethium.h | 99 +++ keyboards/handwired/promethium/readme.md | 12 + keyboards/handwired/promethium/rgbsps.c | 24 + keyboards/handwired/promethium/rgbsps.h | 4 + keyboards/handwired/promethium/rules.mk | 75 ++ 14 files changed, 1182 insertions(+) create mode 100644 keyboards/handwired/promethium/Makefile create mode 100644 keyboards/handwired/promethium/config.h create mode 100644 keyboards/handwired/promethium/keymaps/priyadi/Makefile create mode 100644 keyboards/handwired/promethium/keymaps/priyadi/config.h create mode 100755 keyboards/handwired/promethium/keymaps/priyadi/flash.sh create mode 100644 keyboards/handwired/promethium/keymaps/priyadi/keymap.c create mode 100644 keyboards/handwired/promethium/keymaps/priyadi/readme.md create mode 100644 keyboards/handwired/promethium/keymaps/readme.md create mode 100644 keyboards/handwired/promethium/promethium.c create mode 100644 keyboards/handwired/promethium/promethium.h create mode 100644 keyboards/handwired/promethium/readme.md create mode 100644 keyboards/handwired/promethium/rgbsps.c create mode 100644 keyboards/handwired/promethium/rgbsps.h create mode 100644 keyboards/handwired/promethium/rules.mk diff --git a/keyboards/handwired/promethium/Makefile b/keyboards/handwired/promethium/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/handwired/promethium/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h new file mode 100644 index 0000000000..5a2afe6abd --- /dev/null +++ b/keyboards/handwired/promethium/config.h @@ -0,0 +1,164 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6660 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Priyadi +#define PRODUCT Promethium Keyboard +#define DESCRIPTION Promethium Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +/* default pin-out */ +#define MATRIX_COL_PINS { B6, B7, D6, C7, F6, F7 } +#define MATRIX_ROW_PINS { D7, C6, D0, D1, F5, F4, F1, F0 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* PS/2 mouse */ +#ifdef PS2_USE_BUSYWAIT +# define PS2_CLOCK_PORT PORTD +# define PS2_CLOCK_PIN PIND +# define PS2_CLOCK_DDR DDRD +# define PS2_CLOCK_BIT 1 +# define PS2_DATA_PORT PORTD +# define PS2_DATA_PIN PIND +# define PS2_DATA_DDR DDRD +# define PS2_DATA_BIT 2 +#endif + +/* PS/2 mouse interrupt version */ +#ifdef PS2_USE_INT +/* uses INT1 for clock line(ATMega32U4) */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 3 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 + +#define PS2_INT_INIT() do { \ + EICRA |= ((1< | ( | ) | ' | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | _ | + | { | } | [ | ] | " | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_PUNC] = KEYMAP( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_GRV , + XXXXXXX, XXXXXXX, KC_BSLS, KC_MINS, KC_EQL, KC_LABK, KC_RABK, KC_LPRN, KC_RPRN, KC_QUOT, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, KC_DQUO, XXXXXXX, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +/* Num + * ,-----------------------------------------------------------------------------------. + * | ^ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | @ | A | B | C | ( | ) | 4 | 5 | 6 | : |Enter | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | & | # | D | E | F | [ | ] | 1 | 2 | 3 | / | * | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | x | | | 0 | , | . | + | - | + * `-----------------------------------------------------------------------------------' + */ +[_NUM] = KEYMAP( + KC_CIRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_ESC, KC_AT, S(KC_A), S(KC_B), S(KC_C), KC_LPRN, KC_RPRN, KC_4, KC_5, KC_6, KC_COLN, KC_ENT, + KC_AMPR, KC_HASH, S(KC_D), S(KC_E), S(KC_F), KC_LBRC, KC_RBRC, KC_1, KC_2, KC_3, KC_SLSH, KC_ASTR, + _______, _______, _______, KC_X, _______, KC_SPC, KC_SPC, KC_0, KC_COMM, KC_DOT, KC_PLUS, KC_MINS +), + +/* Func + * ,-----------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | | | PgUp | Up | PgDn | PgUp | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | F5 | F6 | F7 | F8 |PrtSc | | Left | Down | Right| PgDn | Ins | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F9 | F10 | F11 | F12 | | | | Home | End | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_FUNC] = KEYMAP( + XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL, + XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8,KC_PSCREEN,XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_INS, + _______, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +/* Emoji + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_EMOJI] = KEYMAP( + X(HART2), X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY),X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV), X(PHEW), + X(THMUP), X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN),X(HEART), X(BYE), X(KISS),X(CELEB), X(COOL),X(NOEVS), + X(THMDN),X(SLEEP), X(CLAP), X(CRY), X(VIC),X(BHART), X(SUN),X(SMEYE), X(WINK), X(MOON),X(CONFU),X(NOEVH), + X(POO), X(EYES),X(HUNRD), _______,X(SKULL),X(HORNS), X(HALO), X(FEAR), _______,X(YUMMY),X(DISAP),X(NOEVK) +), + +/* GUI + * ,-----------------------------------------------------------------------------------. + * | | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * |Linux | | Vol- | Mute | Vol+ | | | D- | | D+ | |Qwerty| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Win | | Prev | Play | Next | | | | | | |Colmak| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | OSX | | | | | BL- | BL+ | | | | |Workmn| + * `-----------------------------------------------------------------------------------' + */ +[_GUI] = KEYMAP( + _______, LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5),LGUI(KC_6),LGUI(KC_7),LGUI(KC_8),LGUI(KC_9),LGUI(KC_0), _______, + LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,_______, QWERTY, + WIN, _______, KC_MPRV, KC_MPLY, KC_MNXT, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, COLEMAK, + OSX, _______, _______, _______, _______, BL_DEC, BL_INC, _______, _______, RGB_VAI, RGB_VAD, WORKMAN +), + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_workman[][2] = SONG(DVORAK_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +float tone_linux[][2] = SONG(CAPS_LOCK_ON_SOUND); +float tone_windows[][2] = SONG(SCROLL_LOCK_ON_SOUND); +float tone_osx[][2] = SONG(NUM_LOCK_ON_SOUND); +float tone_click[][2] = SONG(MUSICAL_NOTE(_F3, 2)); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + #ifdef AUDIO_ENABLE + // faux clicky + if (record->event.pressed) PLAY_NOTE_ARRAY(tone_click, false, 0); + #endif + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case WORKMAN: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_workman, false, 0); + #endif + persistant_default_layer_set(1UL<<_WORKMAN); + } + return false; + break; + + + + case PUNC: + if (record->event.pressed) { + layer_on(_PUNC); + update_tri_layer(_PUNC, _EMOJI, _GUI); + if (IS_LAYER_ON(_GUI)) { + led_layer_gui(); + } else { + led_layer_punc();; + } + } else { + layer_off(_PUNC); + update_tri_layer(_PUNC, _EMOJI, _GUI); + if (IS_LAYER_ON(_EMOJI)) { + led_layer_emoji(); + } else { + led_layer_normal();; + } + } + return false; + break; + case EMOJI: + if (record->event.pressed) { + layer_on(_EMOJI); + update_tri_layer(_PUNC, _EMOJI, _GUI); + if (IS_LAYER_ON(_GUI)) { + led_layer_gui(); + } else { + led_layer_emoji();; + } + } else { + layer_off(_EMOJI); + update_tri_layer(_PUNC, _EMOJI, _GUI); + if (IS_LAYER_ON(_PUNC)) { + led_layer_punc(); + } else { + led_layer_normal();; + } + } + return false; + break; + case NUM: + if (record->event.pressed) { + layer_on(_NUM); + led_layer_num(); + } else { + layer_off(_NUM); + led_layer_normal(); + } + return false; + break; + case FUNC: + if (record->event.pressed) { + layer_on(_FUNC); + led_layer_func(); + } else { + layer_off(_FUNC); + led_layer_normal(); + } + return false; + break; + + + case LINUX: + set_unicode_input_mode(UC_LNX); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_linux, false, 0); + #endif + return false; + break; + case WIN: + set_unicode_input_mode(UC_WINC); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_windows, false, 0); + #endif + return false; + break; + case OSX: + set_unicode_input_mode(UC_OSX); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_osx, false, 0); + #endif + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif + set_unicode_input_mode(UC_LNX); + led_init(); +} + +// void init_rgblight(void) { +// for (uint8_t i = 0; i < RGBLED_NUM; i++) { +// led[i].r = 255; +// led[i].g = 85; +// led[i].b = 0; +// } +// ws2812_setleds(led, RGBLED_NUM); +// } + + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +#endif \ No newline at end of file diff --git a/keyboards/handwired/promethium/keymaps/priyadi/readme.md b/keyboards/handwired/promethium/keymaps/priyadi/readme.md new file mode 100644 index 0000000000..e69de29bb2 diff --git a/keyboards/handwired/promethium/keymaps/readme.md b/keyboards/handwired/promethium/keymaps/readme.md new file mode 100644 index 0000000000..527691389e --- /dev/null +++ b/keyboards/handwired/promethium/keymaps/readme.md @@ -0,0 +1,22 @@ +# How to add your own keymap + +Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: + + _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] + +\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements + +and contain the following files: + +* `keymap.c` +* `readme.md` *recommended* +* `config.h` *optional*, found automatically when compiling +* `Makefile` *optional*, found automatically when compling + +When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: + + * **folder_name** description + +# List of Promethium keymaps + + diff --git a/keyboards/handwired/promethium/promethium.c b/keyboards/handwired/promethium/promethium.c new file mode 100644 index 0000000000..a0035cce1a --- /dev/null +++ b/keyboards/handwired/promethium/promethium.c @@ -0,0 +1,6 @@ +#include "promethium.h" + +void matrix_init_kb(void) { + + matrix_init_user(); +} \ No newline at end of file diff --git a/keyboards/handwired/promethium/promethium.h b/keyboards/handwired/promethium/promethium.h new file mode 100644 index 0000000000..fb0dc16830 --- /dev/null +++ b/keyboards/handwired/promethium/promethium.h @@ -0,0 +1,99 @@ +#ifndef PROMETHIUM_H +#define PROMETHIUM_H + +#include "quantum.h" + +#define KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \ +) \ +{ \ + {k11, k12, k13, k14, k15, k16}, \ + {k21, k22, k23, k24, k25, k26}, \ + {k31, k32, k33, k34, k35, k36}, \ + {k41, k42, k43, k44, k45, k46}, \ + {k17, k18, k19, k1a, k1b, k1c}, \ + {k27, k28, k29, k2a, k2b, k2c}, \ + {k37, k38, k39, k3a, k3b, k3c}, \ + {k47, k48, k49, k4a, k4b, k4c} \ +} + +enum led_sequence { + LED_IND_EMOJI, + LED_IND_NUM, + LED_IND_FUNC, + + LED_IND_BATTERY, + LED_IND_USB, + LED_IND_BLUETOOTH, + + LED_TAB, + LED_ESC, + LED_LSFT, + LED_LCTL, + + LED_LGUI, + LED_Z, + LED_A, + LED_Q, + + LED_W, + LED_S, + LED_X, + LED_LALT, + + LED_PUNC, + LED_C, + LED_D, + LED_E, + + LED_R, + LED_F, + LED_V, + LED_NUM, + + LED_LSPC, + LED_B, + LED_G, + LED_T, + + LED_TRACKPOINT1, + LED_TRACKPOINT2, + LED_TRACKPOINT3, + + LED_RSPC, + LED_N, + LED_HH, + LED_Y, + + LED_U, + LED_J, + LED_M, + LED_FUNC, + + LED_EMOJI, + LED_COMM, + LED_K, + LED_I, + + LED_O, + LED_L, + LED_DOT, + LED_RALT, + + LED_RGUI, + LED_SLSH, + LED_SCLN, + LED_P, + + LED_BKSP, + LED_ENT, + LED_RSFT, + LED_RCTL +}; + +#endif + + diff --git a/keyboards/handwired/promethium/readme.md b/keyboards/handwired/promethium/readme.md new file mode 100644 index 0000000000..64e2c3a16a --- /dev/null +++ b/keyboards/handwired/promethium/readme.md @@ -0,0 +1,12 @@ +Promethium Keyboard Firmware +============================ +A handwired Planck based keyboard using the Adafruit Feather 32u4 Bluefruit LE controller. + +Features: + +* Single piece split form factor +* Vertical staggered +* Trackpoint +* Bluetooth LE *TBD* +* Battery +* Per switch RGB LED \ No newline at end of file diff --git a/keyboards/handwired/promethium/rgbsps.c b/keyboards/handwired/promethium/rgbsps.c new file mode 100644 index 0000000000..ea922ec3fd --- /dev/null +++ b/keyboards/handwired/promethium/rgbsps.c @@ -0,0 +1,24 @@ +#include "light_ws2812.h" +#include "rgbsps.h" + +struct cRGB led[RGBSPS_NUM]; + +void rgbsps_set(uint8_t index, uint8_t r, uint8_t g, uint8_t b) { + led[index].r = r; + led[index].g = g; + led[index].b = b; +} + +void rgbsps_setall(uint8_t r, uint8_t g, uint8_t b) { + for (uint16_t i = 0; i < RGBSPS_NUM; i++) { + rgbsps_set(i, r, g, b); + } +} + +void rgbsps_turnoff(void) { + rgbsps_setall(0, 0, 0); +} + +void rgbsps_send(void) { + ws2812_setleds(led, RGBSPS_NUM); +} \ No newline at end of file diff --git a/keyboards/handwired/promethium/rgbsps.h b/keyboards/handwired/promethium/rgbsps.h new file mode 100644 index 0000000000..6da197f75d --- /dev/null +++ b/keyboards/handwired/promethium/rgbsps.h @@ -0,0 +1,4 @@ +void rgbsps_set(uint8_t index, uint8_t r, uint8_t g, uint8_t b); +void rgbsps_setall(uint8_t r, uint8_t g, uint8_t b); +void rgbsps_turnoff(void); +void rgbsps_send(void); \ No newline at end of file diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk new file mode 100644 index 0000000000..835b13c4f3 --- /dev/null +++ b/keyboards/handwired/promethium/rules.mk @@ -0,0 +1,75 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 8000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +UNICODEMAP_ENABLE = yes +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +PS2_MOUSE_ENABLE ?= yes +PS2_USE_INT ?= yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +include $(TMK_DIR)/protocol.mk +SRC += $(QUANTUM_DIR)/light_ws2812.c +SRC += rgbsps.c \ No newline at end of file From 9a071f051ca9dffdf64b68ea59b2424e37bc51e7 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 13:24:53 +0700 Subject: [PATCH 057/124] Make PS2 init delay configurable. Some devices are not fully powered up after 1s. --- tmk_core/protocol/ps2_mouse.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index c3e8b3c1c3..82f6966e8e 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -26,6 +26,9 @@ along with this program. If not, see . #include "print.h" #include "debug.h" +#ifndef PS2_INIT_DELAY +#define PS2_INIT_DELAY 1000 +#endif static report_mouse_t mouse_report = {}; @@ -39,7 +42,7 @@ uint8_t ps2_mouse_init(void) { ps2_host_init(); - _delay_ms(1000); // wait for powering up + _delay_ms(PS2_INIT_DELAY); // wait for powering up // send Reset rcv = ps2_host_send(0xFF); From b94e5b2aa6636326b2eaa75a2c562ea074e1535a Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 13:44:50 +0700 Subject: [PATCH 058/124] change init delay to 2000ms --- keyboards/handwired/promethium/promethium.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/keyboards/handwired/promethium/promethium.h b/keyboards/handwired/promethium/promethium.h index fb0dc16830..8f2a8c3be2 100644 --- a/keyboards/handwired/promethium/promethium.h +++ b/keyboards/handwired/promethium/promethium.h @@ -3,6 +3,8 @@ #include "quantum.h" +#define PS2_INIT_DELAY 2000 + #define KEYMAP( \ k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ From 6313ec7ef960ad76182020f031cd09803d7a7d51 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 13:46:05 +0700 Subject: [PATCH 059/124] protocols.mk is already included in latest QMK --- keyboards/handwired/promethium/rules.mk | 1 - 1 file changed, 1 deletion(-) diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk index 835b13c4f3..0842780cce 100644 --- a/keyboards/handwired/promethium/rules.mk +++ b/keyboards/handwired/promethium/rules.mk @@ -70,6 +70,5 @@ PS2_USE_INT ?= yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -include $(TMK_DIR)/protocol.mk SRC += $(QUANTUM_DIR)/light_ws2812.c SRC += rgbsps.c \ No newline at end of file From 2cf9b9375878d3810fbdfe0c215ee4dcb379a163 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 13:47:03 +0700 Subject: [PATCH 060/124] remove ifdef on chip type --- keyboards/handwired/promethium/config.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index 5a2afe6abd..473af67d34 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -116,7 +116,6 @@ along with this program. If not, see . /* PS/2 mouse USART version */ #ifdef PS2_USE_USART -#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) /* XCK for clock line and RXD for data line */ #define PS2_CLOCK_PORT PORTD #define PS2_CLOCK_PIN PIND @@ -158,7 +157,6 @@ along with this program. If not, see . #define PS2_USART_ERROR (UCSR1A & ((1< Date: Sat, 26 Nov 2016 13:55:41 +0700 Subject: [PATCH 061/124] PS2 pins configuration belongs to each keyboards config.h Each keyboard might have different pin configuration. And keeping this here will trigger redefinition warning on keyboards that have PS2 defines. --- quantum/config_common.h | 46 ----------------------------------------- 1 file changed, 46 deletions(-) diff --git a/quantum/config_common.h b/quantum/config_common.h index 6b525fe1c6..21960f1a05 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -78,49 +78,3 @@ # error "USART configuration is needed." # endif #endif - -/* - * PS/2 Interrupt configuration - */ -#ifdef PS2_USE_INT -/* uses INT1 for clock line(ATMega32U4) */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 - -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 0 - -#define PS2_INT_INIT() do { \ - EICRA |= ((1< Date: Sat, 26 Nov 2016 14:02:38 +0700 Subject: [PATCH 062/124] Fix unterminated ifndef --- quantum/config_common.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/quantum/config_common.h b/quantum/config_common.h index 21960f1a05..4d3939dae1 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -78,3 +78,5 @@ # error "USART configuration is needed." # endif #endif + +#endif \ No newline at end of file From f837406ace5a3072e98f0bd0e3f4c84704762195 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 14:23:55 +0700 Subject: [PATCH 063/124] A few addition to PS2 documentation. --- readme.md | 160 ++++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 125 insertions(+), 35 deletions(-) diff --git a/readme.md b/readme.md index 0157b90724..3eb67882ab 100644 --- a/readme.md +++ b/readme.md @@ -1160,41 +1160,131 @@ Please note the USB port can only supply a limited amount of power to the keyboa ## PS/2 Mouse Support Its possible to hook up a PS/2 mouse (for example touchpads or trackpoints) to your keyboard as a composite device. -In order to do this you must first enable the option in your Makefile. - - PS2_MOUSE_ENABLE = yes - -Then, decide whether to use interrupts (better if your microcontroller supports them) or busywait, and enable the relevant option. - - PS2_USE_INT = yes - // PS2_USE_BUSYWAIT = yes - -If you're using a teensy and have hooked up the clock on your PS/2 device to D1 and the data to D0, you're all set. -Otherwise, you will need to update the following defines in your `config.h`: - - #define PS2_CLOCK_PORT PORTD - #define PS2_CLOCK_PIN PIND - #define PS2_CLOCK_DDR DDRD - #define PS2_CLOCK_BIT 1 - - #define PS2_DATA_PORT PORTD - #define PS2_DATA_PIN PIND - #define PS2_DATA_DDR DDRD - #define PS2_DATA_BIT 0 - -And with `PS2_USE_INT` also define these macros: - - #define PS2_INT_INIT() do { \ - EICRA |= ((1< Date: Sat, 26 Nov 2016 15:26:02 +0700 Subject: [PATCH 064/124] add macro error when a required define is missing --- quantum/config_common.h | 118 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 118 insertions(+) diff --git a/quantum/config_common.h b/quantum/config_common.h index 4d3939dae1..0a2dba78ff 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -79,4 +79,122 @@ # endif #endif +#ifdef PS2_USE_BUSYWAIT +# ifndef PS2_CLOCK_PORT +# error "PS2_CLOCK_PORT has to be defined" +# endif +# ifndef PS2_CLOCK_PIN +# error "PS2_CLOCK_PIN has to be defined" +# endif +# ifndef PS2_CLOCK_DDR +# error "PS2_CLOCK_DDR has to be defined" +# endif +# ifndef PS2_CLOCK_BIT +# error "PS2_CLOCK_BIT has to be defined" +# endif +# ifndef PS2_DATA_PORT +# error "PS2_DATA_PORT has to be defined" +# endif +# ifndef PS2_DATA_PIN +# error "PS2_DATA_PIN has to be defined" +# endif +# ifndef PS2_DATA_DDR +# error "PS2_DATA_DDR has to be defined" +# endif +# ifndef PS2_DATA_BIT +# error "PS2_DATA_BIT has to be defined" +# endif +#endif + +#ifdef PS2_USE_INT +# ifndef PS2_CLOCK_PORT +# error "PS2_CLOCK_PORT has to be defined" +# endif +# ifndef PS2_CLOCK_PIN +# error "PS2_CLOCK_PIN has to be defined" +# endif +# ifndef PS2_CLOCK_DDR +# error "PS2_CLOCK_DDR has to be defined" +# endif +# ifndef PS2_CLOCK_BIT +# error "PS2_CLOCK_BIT has to be defined" +# endif +# ifndef PS2_DATA_PORT +# error "PS2_DATA_PORT has to be defined" +# endif +# ifndef PS2_DATA_PIN +# error "PS2_DATA_PIN has to be defined" +# endif +# ifndef PS2_DATA_DDR +# error "PS2_DATA_DDR has to be defined" +# endif +# ifndef PS2_DATA_BIT +# error "PS2_DATA_BIT has to be defined" +# endif +# ifndef PS2_INT_INIT +# error "PS2_INT_INIT has to be defined" +# endif +# ifndef PS2_INT_ON +# error "PS2_INT_ON has to be defined" +# endif +# ifndef PS2_INT_OFF +# error "PS2_INT_OFF has to be defined" +# endif +# ifndef PS2_INT_VECT +# error "PS2_INT_VECT has to be defined" +# endif +#endif + +#ifdef PS2_USE_USART +# ifndef PS2_CLOCK_PORT +# error "PS2_CLOCK_PORT has to be defined" +# endif +# ifndef PS2_CLOCK_PIN +# error "PS2_CLOCK_PIN has to be defined" +# endif +# ifndef PS2_CLOCK_DDR +# error "PS2_CLOCK_DDR has to be defined" +# endif +# ifndef PS2_CLOCK_BIT +# error "PS2_CLOCK_BIT has to be defined" +# endif +# ifndef PS2_DATA_PORT +# error "PS2_DATA_PORT has to be defined" +# endif +# ifndef PS2_DATA_PIN +# error "PS2_DATA_PIN has to be defined" +# endif +# ifndef PS2_DATA_DDR +# error "PS2_DATA_DDR has to be defined" +# endif +# ifndef PS2_DATA_BIT +# error "PS2_DATA_BIT has to be defined" +# endif +# ifndef PS2_USART_INIT +# error "PS2_USART_INIT has to be defined" +# endif +# ifndef PS2_USART_RX_INT_ON +# error "PS2_USART_RX_INT_ON has to be defined" +# endif +# ifndef PS2_USART_RX_POLL_ON +# error "PS2_USART_RX_POLL_ON has to be defined" +# endif +# ifndef PS2_USART_OFF +# error "PS2_USART_OFF has to be defined" +# endif +# ifndef PS2_USART_RX_READY +# error "PS2_USART_RX_READY has to be defined" +# endif +# ifndef PS2_USART_RX_DATA +# error "PS2_USART_RX_DATA has to be defined" +# endif +# ifndef PS2_USART_ERROR +# error "PS2_USART_ERROR has to be defined" +# endif +# ifndef PS2_USART_RX_VECT +# error "PS2_USART_RX_VECT has to be defined" +# endif +#endif + + #endif \ No newline at end of file From f2214ce1cb6cfe7a0efabe870a2c00fb8451ee80 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 15:57:48 +0700 Subject: [PATCH 065/124] remove define checks. didn't work because of include ordering. --- quantum/config_common.h | 118 ---------------------------------------- 1 file changed, 118 deletions(-) diff --git a/quantum/config_common.h b/quantum/config_common.h index 0a2dba78ff..4d3939dae1 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -79,122 +79,4 @@ # endif #endif -#ifdef PS2_USE_BUSYWAIT -# ifndef PS2_CLOCK_PORT -# error "PS2_CLOCK_PORT has to be defined" -# endif -# ifndef PS2_CLOCK_PIN -# error "PS2_CLOCK_PIN has to be defined" -# endif -# ifndef PS2_CLOCK_DDR -# error "PS2_CLOCK_DDR has to be defined" -# endif -# ifndef PS2_CLOCK_BIT -# error "PS2_CLOCK_BIT has to be defined" -# endif -# ifndef PS2_DATA_PORT -# error "PS2_DATA_PORT has to be defined" -# endif -# ifndef PS2_DATA_PIN -# error "PS2_DATA_PIN has to be defined" -# endif -# ifndef PS2_DATA_DDR -# error "PS2_DATA_DDR has to be defined" -# endif -# ifndef PS2_DATA_BIT -# error "PS2_DATA_BIT has to be defined" -# endif -#endif - -#ifdef PS2_USE_INT -# ifndef PS2_CLOCK_PORT -# error "PS2_CLOCK_PORT has to be defined" -# endif -# ifndef PS2_CLOCK_PIN -# error "PS2_CLOCK_PIN has to be defined" -# endif -# ifndef PS2_CLOCK_DDR -# error "PS2_CLOCK_DDR has to be defined" -# endif -# ifndef PS2_CLOCK_BIT -# error "PS2_CLOCK_BIT has to be defined" -# endif -# ifndef PS2_DATA_PORT -# error "PS2_DATA_PORT has to be defined" -# endif -# ifndef PS2_DATA_PIN -# error "PS2_DATA_PIN has to be defined" -# endif -# ifndef PS2_DATA_DDR -# error "PS2_DATA_DDR has to be defined" -# endif -# ifndef PS2_DATA_BIT -# error "PS2_DATA_BIT has to be defined" -# endif -# ifndef PS2_INT_INIT -# error "PS2_INT_INIT has to be defined" -# endif -# ifndef PS2_INT_ON -# error "PS2_INT_ON has to be defined" -# endif -# ifndef PS2_INT_OFF -# error "PS2_INT_OFF has to be defined" -# endif -# ifndef PS2_INT_VECT -# error "PS2_INT_VECT has to be defined" -# endif -#endif - -#ifdef PS2_USE_USART -# ifndef PS2_CLOCK_PORT -# error "PS2_CLOCK_PORT has to be defined" -# endif -# ifndef PS2_CLOCK_PIN -# error "PS2_CLOCK_PIN has to be defined" -# endif -# ifndef PS2_CLOCK_DDR -# error "PS2_CLOCK_DDR has to be defined" -# endif -# ifndef PS2_CLOCK_BIT -# error "PS2_CLOCK_BIT has to be defined" -# endif -# ifndef PS2_DATA_PORT -# error "PS2_DATA_PORT has to be defined" -# endif -# ifndef PS2_DATA_PIN -# error "PS2_DATA_PIN has to be defined" -# endif -# ifndef PS2_DATA_DDR -# error "PS2_DATA_DDR has to be defined" -# endif -# ifndef PS2_DATA_BIT -# error "PS2_DATA_BIT has to be defined" -# endif -# ifndef PS2_USART_INIT -# error "PS2_USART_INIT has to be defined" -# endif -# ifndef PS2_USART_RX_INT_ON -# error "PS2_USART_RX_INT_ON has to be defined" -# endif -# ifndef PS2_USART_RX_POLL_ON -# error "PS2_USART_RX_POLL_ON has to be defined" -# endif -# ifndef PS2_USART_OFF -# error "PS2_USART_OFF has to be defined" -# endif -# ifndef PS2_USART_RX_READY -# error "PS2_USART_RX_READY has to be defined" -# endif -# ifndef PS2_USART_RX_DATA -# error "PS2_USART_RX_DATA has to be defined" -# endif -# ifndef PS2_USART_ERROR -# error "PS2_USART_ERROR has to be defined" -# endif -# ifndef PS2_USART_RX_VECT -# error "PS2_USART_RX_VECT has to be defined" -# endif -#endif - - #endif \ No newline at end of file From 8ee389c9b6e6757c228534b095e609d5a9501102 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 13:11:40 +0700 Subject: [PATCH 066/124] My Promethium keyboard firmware --- keyboards/handwired/promethium/Makefile | 3 + keyboards/handwired/promethium/config.h | 164 ++++ .../promethium/keymaps/priyadi/Makefile | 28 + .../promethium/keymaps/priyadi/config.h | 17 + .../promethium/keymaps/priyadi/flash.sh | 3 + .../promethium/keymaps/priyadi/keymap.c | 725 ++++++++++++++++++ .../promethium/keymaps/priyadi/readme.md | 0 .../handwired/promethium/keymaps/readme.md | 22 + keyboards/handwired/promethium/promethium.c | 6 + keyboards/handwired/promethium/promethium.h | 99 +++ keyboards/handwired/promethium/readme.md | 12 + keyboards/handwired/promethium/rgbsps.c | 24 + keyboards/handwired/promethium/rgbsps.h | 4 + keyboards/handwired/promethium/rules.mk | 75 ++ 14 files changed, 1182 insertions(+) create mode 100644 keyboards/handwired/promethium/Makefile create mode 100644 keyboards/handwired/promethium/config.h create mode 100644 keyboards/handwired/promethium/keymaps/priyadi/Makefile create mode 100644 keyboards/handwired/promethium/keymaps/priyadi/config.h create mode 100755 keyboards/handwired/promethium/keymaps/priyadi/flash.sh create mode 100644 keyboards/handwired/promethium/keymaps/priyadi/keymap.c create mode 100644 keyboards/handwired/promethium/keymaps/priyadi/readme.md create mode 100644 keyboards/handwired/promethium/keymaps/readme.md create mode 100644 keyboards/handwired/promethium/promethium.c create mode 100644 keyboards/handwired/promethium/promethium.h create mode 100644 keyboards/handwired/promethium/readme.md create mode 100644 keyboards/handwired/promethium/rgbsps.c create mode 100644 keyboards/handwired/promethium/rgbsps.h create mode 100644 keyboards/handwired/promethium/rules.mk diff --git a/keyboards/handwired/promethium/Makefile b/keyboards/handwired/promethium/Makefile new file mode 100644 index 0000000000..191c6bb664 --- /dev/null +++ b/keyboards/handwired/promethium/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h new file mode 100644 index 0000000000..5a2afe6abd --- /dev/null +++ b/keyboards/handwired/promethium/config.h @@ -0,0 +1,164 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6660 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Priyadi +#define PRODUCT Promethium Keyboard +#define DESCRIPTION Promethium Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +/* default pin-out */ +#define MATRIX_COL_PINS { B6, B7, D6, C7, F6, F7 } +#define MATRIX_ROW_PINS { D7, C6, D0, D1, F5, F4, F1, F0 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* PS/2 mouse */ +#ifdef PS2_USE_BUSYWAIT +# define PS2_CLOCK_PORT PORTD +# define PS2_CLOCK_PIN PIND +# define PS2_CLOCK_DDR DDRD +# define PS2_CLOCK_BIT 1 +# define PS2_DATA_PORT PORTD +# define PS2_DATA_PIN PIND +# define PS2_DATA_DDR DDRD +# define PS2_DATA_BIT 2 +#endif + +/* PS/2 mouse interrupt version */ +#ifdef PS2_USE_INT +/* uses INT1 for clock line(ATMega32U4) */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 3 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 + +#define PS2_INT_INIT() do { \ + EICRA |= ((1< | ( | ) | ' | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | _ | + | { | } | [ | ] | " | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_PUNC] = KEYMAP( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_GRV , + XXXXXXX, XXXXXXX, KC_BSLS, KC_MINS, KC_EQL, KC_LABK, KC_RABK, KC_LPRN, KC_RPRN, KC_QUOT, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, KC_DQUO, XXXXXXX, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +/* Num + * ,-----------------------------------------------------------------------------------. + * | ^ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | @ | A | B | C | ( | ) | 4 | 5 | 6 | : |Enter | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | & | # | D | E | F | [ | ] | 1 | 2 | 3 | / | * | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | x | | | 0 | , | . | + | - | + * `-----------------------------------------------------------------------------------' + */ +[_NUM] = KEYMAP( + KC_CIRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_ESC, KC_AT, S(KC_A), S(KC_B), S(KC_C), KC_LPRN, KC_RPRN, KC_4, KC_5, KC_6, KC_COLN, KC_ENT, + KC_AMPR, KC_HASH, S(KC_D), S(KC_E), S(KC_F), KC_LBRC, KC_RBRC, KC_1, KC_2, KC_3, KC_SLSH, KC_ASTR, + _______, _______, _______, KC_X, _______, KC_SPC, KC_SPC, KC_0, KC_COMM, KC_DOT, KC_PLUS, KC_MINS +), + +/* Func + * ,-----------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | | | PgUp | Up | PgDn | PgUp | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | F5 | F6 | F7 | F8 |PrtSc | | Left | Down | Right| PgDn | Ins | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F9 | F10 | F11 | F12 | | | | Home | End | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_FUNC] = KEYMAP( + XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, KC_PGUP, KC_UP, KC_PGDN, KC_PGUP, KC_DEL, + XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8,KC_PSCREEN,XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_INS, + _______, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, XXXXXXX, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +/* Emoji + * ,-----------------------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_EMOJI] = KEYMAP( + X(HART2), X(CRY2),X(WEARY),X(EYERT),X(SMIRK), X(TJOY),X(RECYC),X(UNAMU),X(MUSIC),X(OKHND),X(PENSV), X(PHEW), + X(THMUP), X(PRAY),X(SMILE),X(SMIL2),X(FLUSH), X(GRIN),X(HEART), X(BYE), X(KISS),X(CELEB), X(COOL),X(NOEVS), + X(THMDN),X(SLEEP), X(CLAP), X(CRY), X(VIC),X(BHART), X(SUN),X(SMEYE), X(WINK), X(MOON),X(CONFU),X(NOEVH), + X(POO), X(EYES),X(HUNRD), _______,X(SKULL),X(HORNS), X(HALO), X(FEAR), _______,X(YUMMY),X(DISAP),X(NOEVK) +), + +/* GUI + * ,-----------------------------------------------------------------------------------. + * | | D1 | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * |Linux | | Vol- | Mute | Vol+ | | | D- | | D+ | |Qwerty| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Win | | Prev | Play | Next | | | | | | |Colmak| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | OSX | | | | | BL- | BL+ | | | | |Workmn| + * `-----------------------------------------------------------------------------------' + */ +[_GUI] = KEYMAP( + _______, LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5),LGUI(KC_6),LGUI(KC_7),LGUI(KC_8),LGUI(KC_9),LGUI(KC_0), _______, + LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,_______, QWERTY, + WIN, _______, KC_MPRV, KC_MPLY, KC_MNXT, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, COLEMAK, + OSX, _______, _______, _______, _______, BL_DEC, BL_INC, _______, _______, RGB_VAI, RGB_VAD, WORKMAN +), + +}; + +#ifdef AUDIO_ENABLE +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_workman[][2] = SONG(DVORAK_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +float tone_linux[][2] = SONG(CAPS_LOCK_ON_SOUND); +float tone_windows[][2] = SONG(SCROLL_LOCK_ON_SOUND); +float tone_osx[][2] = SONG(NUM_LOCK_ON_SOUND); +float tone_click[][2] = SONG(MUSICAL_NOTE(_F3, 2)); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + #ifdef AUDIO_ENABLE + // faux clicky + if (record->event.pressed) PLAY_NOTE_ARRAY(tone_click, false, 0); + #endif + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case WORKMAN: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_workman, false, 0); + #endif + persistant_default_layer_set(1UL<<_WORKMAN); + } + return false; + break; + + + + case PUNC: + if (record->event.pressed) { + layer_on(_PUNC); + update_tri_layer(_PUNC, _EMOJI, _GUI); + if (IS_LAYER_ON(_GUI)) { + led_layer_gui(); + } else { + led_layer_punc();; + } + } else { + layer_off(_PUNC); + update_tri_layer(_PUNC, _EMOJI, _GUI); + if (IS_LAYER_ON(_EMOJI)) { + led_layer_emoji(); + } else { + led_layer_normal();; + } + } + return false; + break; + case EMOJI: + if (record->event.pressed) { + layer_on(_EMOJI); + update_tri_layer(_PUNC, _EMOJI, _GUI); + if (IS_LAYER_ON(_GUI)) { + led_layer_gui(); + } else { + led_layer_emoji();; + } + } else { + layer_off(_EMOJI); + update_tri_layer(_PUNC, _EMOJI, _GUI); + if (IS_LAYER_ON(_PUNC)) { + led_layer_punc(); + } else { + led_layer_normal();; + } + } + return false; + break; + case NUM: + if (record->event.pressed) { + layer_on(_NUM); + led_layer_num(); + } else { + layer_off(_NUM); + led_layer_normal(); + } + return false; + break; + case FUNC: + if (record->event.pressed) { + layer_on(_FUNC); + led_layer_func(); + } else { + layer_off(_FUNC); + led_layer_normal(); + } + return false; + break; + + + case LINUX: + set_unicode_input_mode(UC_LNX); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_linux, false, 0); + #endif + return false; + break; + case WIN: + set_unicode_input_mode(UC_WINC); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_windows, false, 0); + #endif + return false; + break; + case OSX: + set_unicode_input_mode(UC_OSX); + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_osx, false, 0); + #endif + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif + set_unicode_input_mode(UC_LNX); + led_init(); +} + +// void init_rgblight(void) { +// for (uint8_t i = 0; i < RGBLED_NUM; i++) { +// led[i].r = 255; +// led[i].g = 85; +// led[i].b = 0; +// } +// ws2812_setleds(led, RGBLED_NUM); +// } + + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +#endif \ No newline at end of file diff --git a/keyboards/handwired/promethium/keymaps/priyadi/readme.md b/keyboards/handwired/promethium/keymaps/priyadi/readme.md new file mode 100644 index 0000000000..e69de29bb2 diff --git a/keyboards/handwired/promethium/keymaps/readme.md b/keyboards/handwired/promethium/keymaps/readme.md new file mode 100644 index 0000000000..527691389e --- /dev/null +++ b/keyboards/handwired/promethium/keymaps/readme.md @@ -0,0 +1,22 @@ +# How to add your own keymap + +Folders can be named however you'd like (will be approved upon merging), or should follow the format with a preceding `_`: + + _[ISO 3166-1 alpha-2 code*]_[layout variant]_[layout name/author] + +\* See full list: https://en.wikipedia.org/wiki/ISO_3166-1#Officially_assigned_code_elements + +and contain the following files: + +* `keymap.c` +* `readme.md` *recommended* +* `config.h` *optional*, found automatically when compiling +* `Makefile` *optional*, found automatically when compling + +When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format: + + * **folder_name** description + +# List of Promethium keymaps + + diff --git a/keyboards/handwired/promethium/promethium.c b/keyboards/handwired/promethium/promethium.c new file mode 100644 index 0000000000..a0035cce1a --- /dev/null +++ b/keyboards/handwired/promethium/promethium.c @@ -0,0 +1,6 @@ +#include "promethium.h" + +void matrix_init_kb(void) { + + matrix_init_user(); +} \ No newline at end of file diff --git a/keyboards/handwired/promethium/promethium.h b/keyboards/handwired/promethium/promethium.h new file mode 100644 index 0000000000..fb0dc16830 --- /dev/null +++ b/keyboards/handwired/promethium/promethium.h @@ -0,0 +1,99 @@ +#ifndef PROMETHIUM_H +#define PROMETHIUM_H + +#include "quantum.h" + +#define KEYMAP( \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ + k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \ +) \ +{ \ + {k11, k12, k13, k14, k15, k16}, \ + {k21, k22, k23, k24, k25, k26}, \ + {k31, k32, k33, k34, k35, k36}, \ + {k41, k42, k43, k44, k45, k46}, \ + {k17, k18, k19, k1a, k1b, k1c}, \ + {k27, k28, k29, k2a, k2b, k2c}, \ + {k37, k38, k39, k3a, k3b, k3c}, \ + {k47, k48, k49, k4a, k4b, k4c} \ +} + +enum led_sequence { + LED_IND_EMOJI, + LED_IND_NUM, + LED_IND_FUNC, + + LED_IND_BATTERY, + LED_IND_USB, + LED_IND_BLUETOOTH, + + LED_TAB, + LED_ESC, + LED_LSFT, + LED_LCTL, + + LED_LGUI, + LED_Z, + LED_A, + LED_Q, + + LED_W, + LED_S, + LED_X, + LED_LALT, + + LED_PUNC, + LED_C, + LED_D, + LED_E, + + LED_R, + LED_F, + LED_V, + LED_NUM, + + LED_LSPC, + LED_B, + LED_G, + LED_T, + + LED_TRACKPOINT1, + LED_TRACKPOINT2, + LED_TRACKPOINT3, + + LED_RSPC, + LED_N, + LED_HH, + LED_Y, + + LED_U, + LED_J, + LED_M, + LED_FUNC, + + LED_EMOJI, + LED_COMM, + LED_K, + LED_I, + + LED_O, + LED_L, + LED_DOT, + LED_RALT, + + LED_RGUI, + LED_SLSH, + LED_SCLN, + LED_P, + + LED_BKSP, + LED_ENT, + LED_RSFT, + LED_RCTL +}; + +#endif + + diff --git a/keyboards/handwired/promethium/readme.md b/keyboards/handwired/promethium/readme.md new file mode 100644 index 0000000000..64e2c3a16a --- /dev/null +++ b/keyboards/handwired/promethium/readme.md @@ -0,0 +1,12 @@ +Promethium Keyboard Firmware +============================ +A handwired Planck based keyboard using the Adafruit Feather 32u4 Bluefruit LE controller. + +Features: + +* Single piece split form factor +* Vertical staggered +* Trackpoint +* Bluetooth LE *TBD* +* Battery +* Per switch RGB LED \ No newline at end of file diff --git a/keyboards/handwired/promethium/rgbsps.c b/keyboards/handwired/promethium/rgbsps.c new file mode 100644 index 0000000000..ea922ec3fd --- /dev/null +++ b/keyboards/handwired/promethium/rgbsps.c @@ -0,0 +1,24 @@ +#include "light_ws2812.h" +#include "rgbsps.h" + +struct cRGB led[RGBSPS_NUM]; + +void rgbsps_set(uint8_t index, uint8_t r, uint8_t g, uint8_t b) { + led[index].r = r; + led[index].g = g; + led[index].b = b; +} + +void rgbsps_setall(uint8_t r, uint8_t g, uint8_t b) { + for (uint16_t i = 0; i < RGBSPS_NUM; i++) { + rgbsps_set(i, r, g, b); + } +} + +void rgbsps_turnoff(void) { + rgbsps_setall(0, 0, 0); +} + +void rgbsps_send(void) { + ws2812_setleds(led, RGBSPS_NUM); +} \ No newline at end of file diff --git a/keyboards/handwired/promethium/rgbsps.h b/keyboards/handwired/promethium/rgbsps.h new file mode 100644 index 0000000000..6da197f75d --- /dev/null +++ b/keyboards/handwired/promethium/rgbsps.h @@ -0,0 +1,4 @@ +void rgbsps_set(uint8_t index, uint8_t r, uint8_t g, uint8_t b); +void rgbsps_setall(uint8_t r, uint8_t g, uint8_t b); +void rgbsps_turnoff(void); +void rgbsps_send(void); \ No newline at end of file diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk new file mode 100644 index 0000000000..835b13c4f3 --- /dev/null +++ b/keyboards/handwired/promethium/rules.mk @@ -0,0 +1,75 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 8000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +UNICODEMAP_ENABLE = yes +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +PS2_MOUSE_ENABLE ?= yes +PS2_USE_INT ?= yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +include $(TMK_DIR)/protocol.mk +SRC += $(QUANTUM_DIR)/light_ws2812.c +SRC += rgbsps.c \ No newline at end of file From b5019bef055d3b3a90b8b42268b9ad874600782b Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 13:44:50 +0700 Subject: [PATCH 067/124] change init delay to 2000ms --- keyboards/handwired/promethium/promethium.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/keyboards/handwired/promethium/promethium.h b/keyboards/handwired/promethium/promethium.h index fb0dc16830..8f2a8c3be2 100644 --- a/keyboards/handwired/promethium/promethium.h +++ b/keyboards/handwired/promethium/promethium.h @@ -3,6 +3,8 @@ #include "quantum.h" +#define PS2_INIT_DELAY 2000 + #define KEYMAP( \ k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ From 7f3c9c6a395a921d2914fc5cac1ac8f9441c33eb Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 13:46:05 +0700 Subject: [PATCH 068/124] protocols.mk is already included in latest QMK --- keyboards/handwired/promethium/rules.mk | 1 - 1 file changed, 1 deletion(-) diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk index 835b13c4f3..0842780cce 100644 --- a/keyboards/handwired/promethium/rules.mk +++ b/keyboards/handwired/promethium/rules.mk @@ -70,6 +70,5 @@ PS2_USE_INT ?= yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -include $(TMK_DIR)/protocol.mk SRC += $(QUANTUM_DIR)/light_ws2812.c SRC += rgbsps.c \ No newline at end of file From 0f39ab52192c0e34f0aea5ff6bb1fa2ded427b6e Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sat, 26 Nov 2016 13:47:03 +0700 Subject: [PATCH 069/124] remove ifdef on chip type --- keyboards/handwired/promethium/config.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index 5a2afe6abd..473af67d34 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -116,7 +116,6 @@ along with this program. If not, see . /* PS/2 mouse USART version */ #ifdef PS2_USE_USART -#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) /* XCK for clock line and RXD for data line */ #define PS2_CLOCK_PORT PORTD #define PS2_CLOCK_PIN PIND @@ -158,7 +157,6 @@ along with this program. If not, see . #define PS2_USART_ERROR (UCSR1A & ((1< Date: Sat, 26 Nov 2016 23:53:15 +0700 Subject: [PATCH 070/124] fix strict-prototypes warning --- quantum/process_keycode/process_unicode.h | 1 + 1 file changed, 1 insertion(+) diff --git a/quantum/process_keycode/process_unicode.h b/quantum/process_keycode/process_unicode.h index 065eeb5f6a..f17cfa6cf2 100644 --- a/quantum/process_keycode/process_unicode.h +++ b/quantum/process_keycode/process_unicode.h @@ -22,6 +22,7 @@ void register_hex(uint16_t hex); bool process_unicode(uint16_t keycode, keyrecord_t *record); #ifdef UNICODEMAP_ENABLE +void unicode_map_input_error(void); bool process_unicode_map(uint16_t keycode, keyrecord_t *record); #endif From a182cbc0319d54122e12dfa48e782e8e122c7df6 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sun, 27 Nov 2016 00:34:29 +0700 Subject: [PATCH 071/124] Update Unicode documentation --- readme.md | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/readme.md b/readme.md index 3eb67882ab..cd65e0e69e 100644 --- a/readme.md +++ b/readme.md @@ -911,7 +911,33 @@ In `quantum/keymap_extras/`, you'll see various language files - these work the ## Unicode support -You can currently send 4 hex digits with your OS-specific modifier key (RALT for OSX with the "Unicode Hex Input" layout, see [this article](http://www.poynton.com/notes/misc/mac-unicode-hex-input.html) to learn more) - this is currently limited to supporting one OS at a time, and requires a recompile for switching. 8 digit hex codes are being worked on. The keycode function is `UC(n)`, where *n* is a 4 digit hexidecimal. Enable from the Makefile. +There are three Unicode keymap definition method available in QMK: + +### UNICODE_ENABLE + +Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in +keymap file, where *n* is a 4 digit hexadecimal. + +### UNICODEMAP_ENABLE + +Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping +table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. +The keycode function is `X(n)` where *n* is the array index of the mapping +table. + +### UCIS_ENABLE + +TBD + +Unicode input in QMK works by inputing a sequence of characters to the OS, +sort of like macro. Unfortunately, each OS has different ideas on how Unicode is inputted. + +This is the current list of Unicode input method in QMK: + +* UC_OSX: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex. +* UC_LNX: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else. +* UC_WIN: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead. +* UC_WINC: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows. ## Backlight Breathing From 12c1314b024b0e24dc561d8f8816561a4ca8ff42 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sun, 27 Nov 2016 00:40:31 +0700 Subject: [PATCH 072/124] update docs --- keyboards/handwired/promethium/readme.md | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/keyboards/handwired/promethium/readme.md b/keyboards/handwired/promethium/readme.md index 64e2c3a16a..e63d2f1add 100644 --- a/keyboards/handwired/promethium/readme.md +++ b/keyboards/handwired/promethium/readme.md @@ -5,8 +5,9 @@ A handwired Planck based keyboard using the Adafruit Feather 32u4 Bluefruit LE c Features: * Single piece split form factor -* Vertical staggered +* Columnar stagger * Trackpoint * Bluetooth LE *TBD* * Battery -* Per switch RGB LED \ No newline at end of file +* Per switch RGB LED +* Proximity sensor for energy conservation *TBD* \ No newline at end of file From 7edac212c8ed8442bf4207e70dc8194631b2bf27 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sat, 26 Nov 2016 15:37:46 -0500 Subject: [PATCH 073/124] separated into api files/folder --- build_keyboard.mk | 8 + common.mk | 1 + keyboards/ergodox/keymaps/jack/keymap.c | 2 +- keyboards/ergodox/rules.mk | 1 - keyboards/planck/rules.mk | 1 + keyboards/preonic/keymaps/default/Makefile | 22 --- keyboards/preonic/rules.mk | 3 +- quantum/api.c | 178 ++++++++++++++++++ quantum/api.h | 59 ++++++ quantum/api/api_sysex.c | 29 +++ quantum/api/api_sysex.h | 10 + quantum/quantum.c | 6 +- quantum/quantum.h | 2 +- tmk_core/protocol/lufa/lufa.c | 203 +-------------------- tmk_core/protocol/lufa/lufa.h | 61 +------ 15 files changed, 303 insertions(+), 283 deletions(-) create mode 100644 quantum/api.c create mode 100644 quantum/api.h create mode 100644 quantum/api/api_sysex.c create mode 100644 quantum/api/api_sysex.h diff --git a/build_keyboard.mk b/build_keyboard.mk index 42f8f8ac7b..c1e5540039 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -131,6 +131,14 @@ ifndef CUSTOM_MATRIX SRC += $(QUANTUM_DIR)/matrix.c endif +ifeq ($(strip $(API_SYSEX_ENABLE)), yes) + OPT_DEFS += -DAPI_SYSEX_ENABLE + SRC += $(QUANTUM_DIR)/api/api_sysex.c + OPT_DEFS += -DAPI_ENABLE + SRC += $(QUANTUM_DIR)/api.c + MIDI_ENABLE=yes +endif + ifeq ($(strip $(MIDI_ENABLE)), yes) OPT_DEFS += -DMIDI_ENABLE SRC += $(QUANTUM_DIR)/process_keycode/process_midi.c diff --git a/common.mk b/common.mk index 18751cd5ac..c4b9394a24 100644 --- a/common.mk +++ b/common.mk @@ -23,4 +23,5 @@ COMMON_VPATH += $(QUANTUM_PATH) COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras COMMON_VPATH += $(QUANTUM_PATH)/audio COMMON_VPATH += $(QUANTUM_PATH)/process_keycode +COMMON_VPATH += $(QUANTUM_PATH)/api COMMON_VPATH += $(SERIAL_PATH) \ No newline at end of file diff --git a/keyboards/ergodox/keymaps/jack/keymap.c b/keyboards/ergodox/keymaps/jack/keymap.c index eb41f12127..9cb80c59d1 100644 --- a/keyboards/ergodox/keymaps/jack/keymap.c +++ b/keyboards/ergodox/keymaps/jack/keymap.c @@ -91,7 +91,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) break; case 2: if (record->event.pressed) { // For resetting EEPROM - send_unicode_midi(0x0CA0); + api_send_unicode(0x0CA0); } break; } diff --git a/keyboards/ergodox/rules.mk b/keyboards/ergodox/rules.mk index add64ec76f..2e501e81b2 100644 --- a/keyboards/ergodox/rules.mk +++ b/keyboards/ergodox/rules.mk @@ -24,6 +24,5 @@ COMMAND_ENABLE ?= yes # Commands for debug and configuration CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= yes # Unicode ONEHAND_ENABLE ?= yes # Allow swapping hands of keyboard diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk index 25db53a315..ccee972715 100644 --- a/keyboards/planck/rules.mk +++ b/keyboards/planck/rules.mk @@ -62,6 +62,7 @@ AUDIO_ENABLE ?= no # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +API_SYSEX_ENABLE = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/preonic/keymaps/default/Makefile b/keyboards/preonic/keymaps/default/Makefile index 581e08cd02..3d4659ceb9 100644 --- a/keyboards/preonic/keymaps/default/Makefile +++ b/keyboards/preonic/keymaps/default/Makefile @@ -1,25 +1,3 @@ - - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - ifndef QUANTUM_DIR include ../../../../Makefile endif \ No newline at end of file diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk index d0f3a3a1c0..c4ce2aacca 100644 --- a/keyboards/preonic/rules.mk +++ b/keyboards/preonic/rules.mk @@ -53,7 +53,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= no # Console for debug(+400) COMMAND_ENABLE ?= yes # Commands for debug and configuration @@ -64,6 +64,7 @@ AUDIO_ENABLE ?= no # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +API_SYSEX_ENABLE ?= yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/quantum/api.c b/quantum/api.c new file mode 100644 index 0000000000..4ca3b96762 --- /dev/null +++ b/quantum/api.c @@ -0,0 +1,178 @@ +#include "api.h" +#include "quantum.h" + +void dword_to_bytes(uint32_t dword, uint8_t * bytes) { + bytes[0] = (dword >> 24) & 0xFF; + bytes[1] = (dword >> 16) & 0xFF; + bytes[2] = (dword >> 8) & 0xFF; + bytes[3] = (dword >> 0) & 0xFF; +} + +uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index) { + return ((uint32_t)bytes[index + 0] << 24) | ((uint32_t)bytes[index + 1] << 16) | ((uint32_t)bytes[index + 2] << 8) | (uint32_t)bytes[index + 3]; +} + +__attribute__ ((weak)) +bool process_api_quantum(uint8_t length, uint8_t * data) { + return process_api_keyboard(length, data); +} + +__attribute__ ((weak)) +bool process_api_keyboard(uint8_t length, uint8_t * data) { + return process_api_user(length, data); +} + +__attribute__ ((weak)) +bool process_api_user(uint8_t length, uint8_t * data) { + return true; +} + +void process_api(uint16_t length, uint8_t * data) { + // SEND_STRING("\nRX: "); + // for (uint8_t i = 0; i < length; i++) { + // send_byte(data[i]); + // SEND_STRING(" "); + // } + if (!process_api_quantum(length, data)) + return; + + switch (data[0]) { + case MT_SET_DATA: + switch (data[1]) { + case DT_DEFAULT_LAYER: { + eeconfig_update_default_layer(data[2]); + default_layer_set((uint32_t)(data[2])); + break; + } + case DT_KEYMAP_OPTIONS: { + eeconfig_update_keymap(data[2]); + break; + } + case DT_RGBLIGHT: { + #ifdef RGBLIGHT_ENABLE + uint32_t rgblight = bytes_to_dword(data, 2); + rgblight_update_dword(rgblight); + #endif + break; + } + } + case MT_GET_DATA: + switch (data[1]) { + case DT_HANDSHAKE: { + MT_GET_DATA_ACK(DT_HANDSHAKE, NULL, 0); + break; + } + case DT_DEBUG: { + uint8_t debug_bytes[1] = { eeprom_read_byte(EECONFIG_DEBUG) }; + MT_GET_DATA_ACK(DT_DEBUG, debug_bytes, 1); + break; + } + case DT_DEFAULT_LAYER: { + uint8_t default_bytes[1] = { eeprom_read_byte(EECONFIG_DEFAULT_LAYER) }; + MT_GET_DATA_ACK(DT_DEFAULT_LAYER, default_bytes, 1); + break; + } + case DT_CURRENT_LAYER: { + uint8_t layer_state_bytes[4]; + dword_to_bytes(layer_state, layer_state_bytes); + MT_GET_DATA_ACK(DT_CURRENT_LAYER, layer_state_bytes, 4); + break; + } + case DT_AUDIO: { + #ifdef AUDIO_ENABLE + uint8_t audio_bytes[1] = { eeprom_read_byte(EECONFIG_AUDIO) }; + MT_GET_DATA_ACK(DT_AUDIO, audio_bytes, 1); + #else + MT_GET_DATA_ACK(DT_AUDIO, NULL, 0); + #endif + break; + } + case DT_BACKLIGHT: { + #ifdef BACKLIGHT_ENABLE + uint8_t backlight_bytes[1] = { eeprom_read_byte(EECONFIG_BACKLIGHT) }; + MT_GET_DATA_ACK(DT_BACKLIGHT, backlight_bytes, 1); + #else + MT_GET_DATA_ACK(DT_BACKLIGHT, NULL, 0); + #endif + break; + } + case DT_RGBLIGHT: { + #ifdef RGBLIGHT_ENABLE + uint8_t rgblight_bytes[4]; + dword_to_bytes(eeconfig_read_rgblight(), rgblight_bytes); + MT_GET_DATA_ACK(DT_RGBLIGHT, rgblight_bytes, 4); + #else + MT_GET_DATA_ACK(DT_RGBLIGHT, NULL, 0); + #endif + break; + } + case DT_KEYMAP_OPTIONS: { + uint8_t keymap_bytes[1] = { eeconfig_read_keymap() }; + MT_GET_DATA_ACK(DT_KEYMAP_OPTIONS, keymap_bytes, 1); + break; + } + case DT_KEYMAP_SIZE: { + uint8_t keymap_size[2] = {MATRIX_ROWS, MATRIX_COLS}; + MT_GET_DATA_ACK(DT_KEYMAP_SIZE, keymap_size, 2); + break; + } + case DT_KEYMAP: { + uint8_t keymap_data[MATRIX_ROWS * MATRIX_COLS * 4 + 3]; + keymap_data[0] = data[2]; + keymap_data[1] = MATRIX_ROWS; + keymap_data[2] = MATRIX_COLS; + for (int i = 0; i < MATRIX_ROWS; i++) { + for (int j = 0; j < MATRIX_COLS; j++) { + keymap_data[3 + (i*MATRIX_COLS*2) + (j*2)] = pgm_read_word(&keymaps[data[2]][i][j]) >> 8; + keymap_data[3 + (i*MATRIX_COLS*2) + (j*2) + 1] = pgm_read_word(&keymaps[data[2]][i][j]) & 0xFF; + } + } + MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, MATRIX_ROWS * MATRIX_COLS * 4 + 3); + // uint8_t keymap_data[5]; + // keymap_data[0] = data[2]; + // keymap_data[1] = data[3]; + // keymap_data[2] = data[4]; + // keymap_data[3] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) >> 8; + // keymap_data[4] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) & 0xFF; + + // MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, 5); + break; + } + default: + break; + } + break; + case MT_SET_DATA_ACK: + case MT_GET_DATA_ACK: + break; + case MT_SEND_DATA: + break; + case MT_SEND_DATA_ACK: + break; + case MT_EXE_ACTION: + break; + case MT_EXE_ACTION_ACK: + break; + case MT_TYPE_ERROR: + break; + default: ; // command not recognised + SEND_BYTES(MT_TYPE_ERROR, DT_NONE, data, length); + break; + + // #ifdef RGBLIGHT_ENABLE + // case 0x27: ; // RGB LED functions + // switch (*data++) { + // case 0x00: ; // Update HSV + // rgblight_sethsv((data[0] << 8 | data[1]) % 360, data[2], data[3]); + // break; + // case 0x01: ; // Update RGB + // break; + // case 0x02: ; // Update mode + // rgblight_mode(data[0]); + // break; + // } + // break; + // #endif + } + +} \ No newline at end of file diff --git a/quantum/api.h b/quantum/api.h new file mode 100644 index 0000000000..00dcdb8954 --- /dev/null +++ b/quantum/api.h @@ -0,0 +1,59 @@ +#ifndef _API_H_ +#define _API_H_ + +#include "lufa.h" + +enum MESSAGE_TYPE { + MT_GET_DATA = 0x10, // Get data from keyboard + MT_GET_DATA_ACK = 0x11, // returned data to process (ACK) + MT_SET_DATA = 0x20, // Set data on keyboard + MT_SET_DATA_ACK = 0x21, // returned data to confirm (ACK) + MT_SEND_DATA = 0x30, // Sending data/action from keyboard + MT_SEND_DATA_ACK = 0x31, // returned data/action confirmation (ACK) + MT_EXE_ACTION = 0x40, // executing actions on keyboard + MT_EXE_ACTION_ACK =0x41, // return confirmation/value (ACK) + MT_TYPE_ERROR = 0x80 // type not recofgnised (ACK) +}; + +enum DATA_TYPE { + DT_NONE = 0x00, + DT_HANDSHAKE, + DT_DEFAULT_LAYER, + DT_CURRENT_LAYER, + DT_KEYMAP_OPTIONS, + DT_BACKLIGHT, + DT_RGBLIGHT, + DT_UNICODE, + DT_DEBUG, + DT_AUDIO, + DT_QUANTUM_ACTION, + DT_KEYBOARD_ACTION, + DT_USER_ACTION, + DT_KEYMAP_SIZE, + DT_KEYMAP +}; + +void dword_to_bytes(uint32_t dword, uint8_t * bytes); +uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index); + +#define MT_GET_DATA(data_type, data, length) SEND_BYTES(MT_GET_DATA, data_type, data, length) +#define MT_GET_DATA_ACK(data_type, data, length) SEND_BYTES(MT_GET_DATA_ACK, data_type, data, length) +#define MT_SET_DATA(data_type, data, length) SEND_BYTES(MT_SET_DATA, data_type, data, length) +#define MT_SET_DATA_ACK(data_type, data, length) SEND_BYTES(MT_SET_DATA_ACK, data_type, data, length) +#define MT_SEND_DATA(data_type, data, length) SEND_BYTES(MT_SEND_DATA, data_type, data, length) +#define MT_SEND_DATA_ACK(data_type, data, length) SEND_BYTES(MT_SEND_DATA_ACK, data_type, data, length) +#define MT_EXE_ACTION(data_type, data, length) SEND_BYTES(MT_EXE_ACTION, data_type, data, length) +#define MT_EXE_ACTION_ACK(data_type, data, length) SEND_BYTES(MT_EXE_ACTION_ACK, data_type, data, length) + +void process_api(uint16_t length, uint8_t * data); + +__attribute__ ((weak)) +bool process_api_quantum(uint8_t length, uint8_t * data); + +__attribute__ ((weak)) +bool process_api_keyboard(uint8_t length, uint8_t * data); + +__attribute__ ((weak)) +bool process_api_user(uint8_t length, uint8_t * data); + +#endif \ No newline at end of file diff --git a/quantum/api/api_sysex.c b/quantum/api/api_sysex.c new file mode 100644 index 0000000000..a4a554e764 --- /dev/null +++ b/quantum/api/api_sysex.c @@ -0,0 +1,29 @@ +#include "api_sysex.h" + +void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint16_t length) { + // SEND_STRING("\nTX: "); + // for (uint8_t i = 0; i < length; i++) { + // send_byte(bytes[i]); + // SEND_STRING(" "); + // } + uint8_t * precode = malloc(sizeof(uint8_t) * (length + 2)); + precode[0] = message_type; + precode[1] = data_type; + memcpy(precode + 2, bytes, length); + uint8_t * encoded = malloc(sizeof(uint8_t) * (sysex_encoded_length(length + 2))); + uint16_t encoded_length = sysex_encode(encoded, precode, length + 2); + uint8_t * array = malloc(sizeof(uint8_t) * (encoded_length + 5)); + array[0] = 0xF0; + array[1] = 0x00; + array[2] = 0x00; + array[3] = 0x00; + array[encoded_length + 4] = 0xF7; + memcpy(array + 4, encoded, encoded_length); + midi_send_array(&midi_device, encoded_length + 5, array); + + // SEND_STRING("\nTD: "); + // for (uint8_t i = 0; i < encoded_length + 5; i++) { + // send_byte(array[i]); + // SEND_STRING(" "); + // } +} \ No newline at end of file diff --git a/quantum/api/api_sysex.h b/quantum/api/api_sysex.h new file mode 100644 index 0000000000..b947b60e54 --- /dev/null +++ b/quantum/api/api_sysex.h @@ -0,0 +1,10 @@ +#ifndef _API_SYSEX_H_ +#define _API_SYSEX_H_ + +#include "api.h" + +void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint16_t length); + +#define SEND_BYTES(mt, dt, b, l) send_bytes_sysex(mt, dt, b, l) + +#endif \ No newline at end of file diff --git a/quantum/quantum.c b/quantum/quantum.c index 8372a7adc5..f653564a67 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -847,12 +847,12 @@ void send_nibble(uint8_t number) { } } -void send_unicode_midi(uint32_t unicode) { - #ifdef MIDI_ENABLE +void api_send_unicode(uint32_t unicode) { +#ifdef API_ENABLE uint8_t chunk[4]; dword_to_bytes(unicode, chunk); MT_SEND_DATA(DT_UNICODE, chunk, 5); - #endif +#endif } __attribute__ ((weak)) diff --git a/quantum/quantum.h b/quantum/quantum.h index 316da15b9a..e6adf974ab 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -119,6 +119,6 @@ void send_nibble(uint8_t number); void led_set_user(uint8_t usb_led); void led_set_kb(uint8_t usb_led); -void send_unicode_midi(uint32_t unicode); +void api_send_unicode(uint32_t unicode); #endif diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index aa2e781c80..39d4824b6b 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -1091,37 +1091,17 @@ void fallthrough_callback(MidiDevice * device, #endif } -#ifdef RGB_MIDI - rgblight_config_t rgblight_config; -#endif void cc_callback(MidiDevice * device, uint8_t chan, uint8_t num, uint8_t val) { //sending it back on the next channel // midi_send_cc(device, (chan + 1) % 16, num, val); - #ifdef RGB_MIDI - rgblight_config.raw = eeconfig_read_rgblight(); - switch (num) { - case 14: - rgblight_config.hue = val * 360 / 127; - break; - case 15: - rgblight_config.sat = val << 1; - break; - case 16: - rgblight_config.val = val << 1; - break; - } - rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val); - #endif } uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0}; void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { - // for (int i = 0; i < length; i++) - // midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); - // if (start == 0x27) { + #ifdef API_SYSEX_ENABLE // SEND_STRING("\n"); // send_word(start); // SEND_STRING(": "); @@ -1136,190 +1116,13 @@ void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t // } uint8_t * decoded = malloc(sizeof(uint8_t) * (sysex_decoded_length(start + place - 4))); uint16_t decode_length = sysex_decode(decoded, midi_buffer + 4, start + place - 4); - sysex_buffer_callback(device, decode_length, decoded); + process_api(decode_length, decoded); } // SEND_STRING(" "); data++; } - // } - -} - -void dword_to_bytes(uint32_t dword, uint8_t * bytes) { - bytes[0] = (dword >> 24) & 0xFF; - bytes[1] = (dword >> 16) & 0xFF; - bytes[2] = (dword >> 8) & 0xFF; - bytes[3] = (dword >> 0) & 0xFF; -} - -uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index) { - return ((uint32_t)bytes[index + 0] << 24) | ((uint32_t)bytes[index + 1] << 16) | ((uint32_t)bytes[index + 2] << 8) | (uint32_t)bytes[index + 3]; -} - -void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint8_t length) { - // SEND_STRING("\nTX: "); - // for (uint8_t i = 0; i < length; i++) { - // send_byte(bytes[i]); - // SEND_STRING(" "); - // } - uint8_t * precode = malloc(sizeof(uint8_t) * (length + 2)); - precode[0] = message_type; - precode[1] = data_type; - memcpy(precode + 2, bytes, length); - uint8_t * encoded = malloc(sizeof(uint8_t) * (sysex_encoded_length(length + 2))); - uint16_t encoded_length = sysex_encode(encoded, precode, length + 2); - uint8_t * array = malloc(sizeof(uint8_t) * (encoded_length + 5)); - array[0] = 0xF0; - array[1] = 0x00; - array[2] = 0x00; - array[3] = 0x00; - array[encoded_length + 4] = 0xF7; - memcpy(array + 4, encoded, encoded_length); - midi_send_array(&midi_device, encoded_length + 5, array); - - // SEND_STRING("\nTD: "); - // for (uint8_t i = 0; i < encoded_length + 5; i++) { - // send_byte(array[i]); - // SEND_STRING(" "); - // } -} - -__attribute__ ((weak)) -bool sysex_process_quantum(uint8_t length, uint8_t * data) { - return sysex_process_keyboard(length, data); -} - -__attribute__ ((weak)) -bool sysex_process_keyboard(uint8_t length, uint8_t * data) { - return sysex_process_user(length, data); -} - -__attribute__ ((weak)) -bool sysex_process_user(uint8_t length, uint8_t * data) { - return true; + #endif } -void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data) { - // SEND_STRING("\nRX: "); - // for (uint8_t i = 0; i < length; i++) { - // send_byte(data[i]); - // SEND_STRING(" "); - // } - if (!sysex_process_quantum(length, data)) - return; - - switch (data[0]) { - case MT_SET_DATA: - switch (data[1]) { - case DT_DEFAULT_LAYER: { - eeconfig_update_default_layer(data[2]); - default_layer_set((uint32_t)(data[2])); - break; - } - case DT_KEYMAP_OPTIONS: { - eeconfig_update_keymap(data[2]); - break; - } - case DT_RGBLIGHT: { - #ifdef RGBLIGHT_ENABLE - uint32_t rgblight = bytes_to_dword(data, 2); - rgblight_update_dword(rgblight); - #endif - break; - } - } - case MT_GET_DATA: - switch (data[1]) { - case DT_HANDSHAKE: { - MT_GET_DATA_ACK(DT_HANDSHAKE, NULL, 0); - break; - } - case DT_DEBUG: { - uint8_t debug_bytes[1] = { eeprom_read_byte(EECONFIG_DEBUG) }; - MT_GET_DATA_ACK(DT_DEBUG, debug_bytes, 1); - break; - } - case DT_DEFAULT_LAYER: { - uint8_t default_bytes[1] = { eeprom_read_byte(EECONFIG_DEFAULT_LAYER) }; - MT_GET_DATA_ACK(DT_DEFAULT_LAYER, default_bytes, 1); - break; - } - case DT_CURRENT_LAYER: { - uint8_t layer_state_bytes[4]; - dword_to_bytes(layer_state, layer_state_bytes); - MT_GET_DATA_ACK(DT_CURRENT_LAYER, layer_state_bytes, 4); - break; - } - case DT_AUDIO: { - #ifdef AUDIO_ENABLE - uint8_t audio_bytes[1] = { eeprom_read_byte(EECONFIG_AUDIO) }; - MT_GET_DATA_ACK(DT_AUDIO, audio_bytes, 1); - #else - MT_GET_DATA_ACK(DT_AUDIO, NULL, 0); - #endif - break; - } - case DT_BACKLIGHT: { - #ifdef BACKLIGHT_ENABLE - uint8_t backlight_bytes[1] = { eeprom_read_byte(EECONFIG_BACKLIGHT) }; - MT_GET_DATA_ACK(DT_BACKLIGHT, backlight_bytes, 1); - #else - MT_GET_DATA_ACK(DT_BACKLIGHT, NULL, 0); - #endif - break; - } - case DT_RGBLIGHT: { - #ifdef RGBLIGHT_ENABLE - uint8_t rgblight_bytes[4]; - dword_to_bytes(eeconfig_read_rgblight(), rgblight_bytes); - MT_GET_DATA_ACK(DT_RGBLIGHT, rgblight_bytes, 4); - #else - MT_GET_DATA_ACK(DT_RGBLIGHT, NULL, 0); - #endif - break; - } - case DT_KEYMAP_OPTIONS: { - uint8_t keymap_bytes[1] = { eeconfig_read_keymap() }; - MT_GET_DATA_ACK(DT_KEYMAP_OPTIONS, keymap_bytes, 1); - break; - } - default: - break; - } - break; - case MT_SET_DATA_ACK: - case MT_GET_DATA_ACK: - break; - case MT_SEND_DATA: - break; - case MT_SEND_DATA_ACK: - break; - case MT_EXE_ACTION: - break; - case MT_EXE_ACTION_ACK: - break; - case MT_TYPE_ERROR: - break; - default: ; // command not recognised - send_bytes_sysex(MT_TYPE_ERROR, DT_NONE, data, length); - break; - - // #ifdef RGBLIGHT_ENABLE - // case 0x27: ; // RGB LED functions - // switch (*data++) { - // case 0x00: ; // Update HSV - // rgblight_sethsv((data[0] << 8 | data[1]) % 360, data[2], data[3]); - // break; - // case 0x01: ; // Update RGB - // break; - // case 0x02: ; // Update mode - // rgblight_mode(data[0]); - // break; - // } - // break; - // #endif - } - -} #endif diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h index 0962dda8d8..b11854101d 100644 --- a/tmk_core/protocol/lufa/lufa.h +++ b/tmk_core/protocol/lufa/lufa.h @@ -68,64 +68,17 @@ typedef struct { } __attribute__ ((packed)) report_extra_t; #ifdef MIDI_ENABLE - #define MIDI_SYSEX_BUFFER 16 void MIDI_Task(void); MidiDevice midi_device; + #define MIDI_SYSEX_BUFFER 32 +#endif - void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data); - void sysex_buffer_callback(MidiDevice * device, uint8_t length, uint8_t * data); - void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint8_t length); - void dword_to_bytes(uint32_t dword, uint8_t * bytes); - uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index); - - __attribute__ ((weak)) - bool sysex_process_quantum(uint8_t length, uint8_t * data); - - __attribute__ ((weak)) - bool sysex_process_keyboard(uint8_t length, uint8_t * data); - - __attribute__ ((weak)) - bool sysex_process_user(uint8_t length, uint8_t * data); - - enum MESSAGE_TYPE { - MT_GET_DATA = 0x10, // Get data from keyboard - MT_GET_DATA_ACK = 0x11, // returned data to process (ACK) - MT_SET_DATA = 0x20, // Set data on keyboard - MT_SET_DATA_ACK = 0x21, // returned data to confirm (ACK) - MT_SEND_DATA = 0x30, // Sending data/action from keyboard - MT_SEND_DATA_ACK = 0x31, // returned data/action confirmation (ACK) - MT_EXE_ACTION = 0x40, // executing actions on keyboard - MT_EXE_ACTION_ACK =0x41, // return confirmation/value (ACK) - MT_TYPE_ERROR = 0x80 // type not recofgnised (ACK) - }; - - enum DATA_TYPE { - DT_NONE = 0x00, - DT_HANDSHAKE, - DT_DEFAULT_LAYER, - DT_CURRENT_LAYER, - DT_KEYMAP_OPTIONS, - DT_BACKLIGHT, - DT_RGBLIGHT, - DT_UNICODE, - DT_DEBUG, - DT_AUDIO, - DT_QUANTUM_ACTION, - DT_KEYBOARD_ACTION, - DT_USER_ACTION, - - }; - - - #define MT_GET_DATA(data_type, data, length) send_bytes_sysex(MT_GET_DATA, data_type, data, length) - #define MT_GET_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_GET_DATA_ACK, data_type, data, length) - #define MT_SET_DATA(data_type, data, length) send_bytes_sysex(MT_SET_DATA, data_type, data, length) - #define MT_SET_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_SET_DATA_ACK, data_type, data, length) - #define MT_SEND_DATA(data_type, data, length) send_bytes_sysex(MT_SEND_DATA, data_type, data, length) - #define MT_SEND_DATA_ACK(data_type, data, length) send_bytes_sysex(MT_SEND_DATA_ACK, data_type, data, length) - #define MT_EXE_ACTION(data_type, data, length) send_bytes_sysex(MT_EXE_ACTION, data_type, data, length) - #define MT_EXE_ACTION_ACK(data_type, data, length) send_bytes_sysex(MT_EXE_ACTION_ACK, data_type, data, length) +#ifdef API_ENABLE + #include "api.h" +#endif +#ifdef API_SYSEX_ENABLE + #include "api_sysex.h" #endif // #if LUFA_VERSION_INTEGER < 0x120730 From be4e75423a232d9d328bb23835e0fa5152292c95 Mon Sep 17 00:00:00 2001 From: Wez Furlong Date: Sun, 27 Nov 2016 22:41:22 -0800 Subject: [PATCH 074/124] Tidy up atomicity in timer.c and ring_buffer.h Adopt the macros for saving/restoring the interrupt state that are provided by the avr gcc environment. Removing intialization of the timer value; this shaves off a few bytes because globals are default initialized to zero. --- tmk_core/common/avr/timer.c | 36 ++++++++++++++++-------------------- tmk_core/ring_buffer.h | 26 ++++++++++++-------------- 2 files changed, 28 insertions(+), 34 deletions(-) diff --git a/tmk_core/common/avr/timer.c b/tmk_core/common/avr/timer.c index 292b41c3a6..84af444885 100644 --- a/tmk_core/common/avr/timer.c +++ b/tmk_core/common/avr/timer.c @@ -17,6 +17,7 @@ along with this program. If not, see . #include #include +#include #include #include "timer_avr.h" #include "timer.h" @@ -24,7 +25,7 @@ along with this program. If not, see . // counter resolution 1ms // NOTE: union { uint32_t timer32; struct { uint16_t dummy; uint16_t timer16; }} -volatile uint32_t timer_count = 0; +volatile uint32_t timer_count; void timer_init(void) { @@ -52,10 +53,9 @@ void timer_init(void) inline void timer_clear(void) { - uint8_t sreg = SREG; - cli(); + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { timer_count = 0; - SREG = sreg; + } } inline @@ -63,10 +63,9 @@ uint16_t timer_read(void) { uint32_t t; - uint8_t sreg = SREG; - cli(); - t = timer_count; - SREG = sreg; + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { + t = timer_count; + } return (t & 0xFFFF); } @@ -76,10 +75,9 @@ uint32_t timer_read32(void) { uint32_t t; - uint8_t sreg = SREG; - cli(); - t = timer_count; - SREG = sreg; + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { + t = timer_count; + } return t; } @@ -89,10 +87,9 @@ uint16_t timer_elapsed(uint16_t last) { uint32_t t; - uint8_t sreg = SREG; - cli(); - t = timer_count; - SREG = sreg; + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { + t = timer_count; + } return TIMER_DIFF_16((t & 0xFFFF), last); } @@ -102,10 +99,9 @@ uint32_t timer_elapsed32(uint32_t last) { uint32_t t; - uint8_t sreg = SREG; - cli(); - t = timer_count; - SREG = sreg; + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { + t = timer_count; + } return TIMER_DIFF_32(t, last); } diff --git a/tmk_core/ring_buffer.h b/tmk_core/ring_buffer.h index 7bdebbcf34..005d1be613 100644 --- a/tmk_core/ring_buffer.h +++ b/tmk_core/ring_buffer.h @@ -4,13 +4,13 @@ * Ring buffer to store scan codes from keyboard *------------------------------------------------------------------*/ #define RBUF_SIZE 32 +#include static uint8_t rbuf[RBUF_SIZE]; static uint8_t rbuf_head = 0; static uint8_t rbuf_tail = 0; static inline void rbuf_enqueue(uint8_t data) { - uint8_t sreg = SREG; - cli(); + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { uint8_t next = (rbuf_head + 1) % RBUF_SIZE; if (next != rbuf_tail) { rbuf[rbuf_head] = data; @@ -18,36 +18,34 @@ static inline void rbuf_enqueue(uint8_t data) } else { print("rbuf: full\n"); } - SREG = sreg; + } } static inline uint8_t rbuf_dequeue(void) { uint8_t val = 0; + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { - uint8_t sreg = SREG; - cli(); if (rbuf_head != rbuf_tail) { val = rbuf[rbuf_tail]; rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; } - SREG = sreg; + } return val; } static inline bool rbuf_has_data(void) { - uint8_t sreg = SREG; - cli(); - bool has_data = (rbuf_head != rbuf_tail); - SREG = sreg; - return has_data; + bool has_data; + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { + has_data = (rbuf_head != rbuf_tail); + } + return has_data; } static inline void rbuf_clear(void) { - uint8_t sreg = SREG; - cli(); + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { rbuf_head = rbuf_tail = 0; - SREG = sreg; + } } #endif /* RING_BUFFER_H */ From 8485bb34d2e291db5b6c81f892850da1cdca37ba Mon Sep 17 00:00:00 2001 From: Wez Furlong Date: Sun, 27 Nov 2016 22:43:11 -0800 Subject: [PATCH 075/124] Add arduino-alike GPIO pin control helpers Unlike the arduino functions, these don't take abstract pin numbers, they take pin labels like `B0`. Also, rather than taking very generic parameter names, these take slightly more descriptive enum values. These improve the clarity of code that would otherwise be inscrutable bit manipulation in tersely named port register names. --- quantum/pincontrol.h | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 quantum/pincontrol.h diff --git a/quantum/pincontrol.h b/quantum/pincontrol.h new file mode 100644 index 0000000000..36ce29ef22 --- /dev/null +++ b/quantum/pincontrol.h @@ -0,0 +1,37 @@ +#pragma once +// Some helpers for controlling gpio pins +#include + +enum { + PinDirectionInput = 0, + PinDirectionOutput = 1, + PinLevelHigh = 1, + PinLevelLow = 0, +}; + +// ex: pinMode(B0, PinDirectionOutput); +static inline void pinMode(uint8_t pin, int mode) { + uint8_t bv = _BV(pin & 0xf); + if (mode == PinDirectionOutput) { + _SFR_IO8((pin >> 4) + 1) |= bv; + } else { + _SFR_IO8((pin >> 4) + 1) &= ~bv; + _SFR_IO8((pin >> 4) + 2) &= ~bv; + } +} + +// ex: digitalWrite(B0, PinLevelHigh); +static inline void digitalWrite(uint8_t pin, int mode) { + uint8_t bv = _BV(pin & 0xf); + if (mode == PinLevelHigh) { + _SFR_IO8((pin >> 4) + 2) |= bv; + } else { + _SFR_IO8((pin >> 4) + 2) &= ~bv; + } +} + +// Return true if the pin is HIGH +// digitalRead(B0) +static inline bool digitalRead(uint8_t pin) { + return _SFR_IO8(pin >> 4) & _BV(pin & 0xf); +} From 712476cd288505cabb2ad6163d1c1ba13a7a1cca Mon Sep 17 00:00:00 2001 From: Wez Furlong Date: Sun, 27 Nov 2016 22:48:04 -0800 Subject: [PATCH 076/124] Add support for Adafruit BLE modules This implements some helper functions that allow sending key reports to an SPI based Bluetooth Low Energy module, such as the Adafruit Feather 32u4 Bluefruit LE. There is some plumbing required in lufa.c to enable this; that is in a follow-on commit. --- tmk_core/common.mk | 6 +- tmk_core/protocol/lufa.mk | 4 + tmk_core/protocol/lufa/adafruit_ble.cpp | 805 ++++++++++++++++++++++++ tmk_core/protocol/lufa/adafruit_ble.h | 60 ++ tmk_core/protocol/lufa/ringbuffer.hpp | 66 ++ 5 files changed, 940 insertions(+), 1 deletion(-) create mode 100644 tmk_core/protocol/lufa/adafruit_ble.cpp create mode 100644 tmk_core/protocol/lufa/adafruit_ble.h create mode 100644 tmk_core/protocol/lufa/ringbuffer.hpp diff --git a/tmk_core/common.mk b/tmk_core/common.mk index f826a7b540..c32a12bb6f 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -81,6 +81,10 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes) TMK_COMMON_DEFS += -DBACKLIGHT_ENABLE endif +ifeq ($(strip $(ADAFRUIT_BLE_ENABLE)), yes) + TMK_COMMON_DEFS += -DADAFRUIT_BLE_ENABLE +endif + ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE endif @@ -110,4 +114,4 @@ endif VPATH += $(TMK_PATH)/$(COMMON_DIR) ifeq ($(PLATFORM),CHIBIOS) VPATH += $(TMK_PATH)/$(COMMON_DIR)/chibios -endif \ No newline at end of file +endif diff --git a/tmk_core/protocol/lufa.mk b/tmk_core/protocol/lufa.mk index 5b1e3d19d0..151d26cbc8 100644 --- a/tmk_core/protocol/lufa.mk +++ b/tmk_core/protocol/lufa.mk @@ -21,6 +21,10 @@ ifeq ($(strip $(MIDI_ENABLE)), yes) include $(TMK_PATH)/protocol/midi.mk endif +ifeq ($(strip $(ADAFRUIT_BLE_ENABLE)), yes) + LUFA_SRC += $(LUFA_DIR)/adafruit_ble.cpp +endif + ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) LUFA_SRC += $(LUFA_DIR)/bluetooth.c \ $(TMK_DIR)/protocol/serial_uart.c diff --git a/tmk_core/protocol/lufa/adafruit_ble.cpp b/tmk_core/protocol/lufa/adafruit_ble.cpp new file mode 100644 index 0000000000..37194e77a9 --- /dev/null +++ b/tmk_core/protocol/lufa/adafruit_ble.cpp @@ -0,0 +1,805 @@ +#include "adafruit_ble.h" +#include +#include +#include +#include +#include +#include "debug.h" +#include "pincontrol.h" +#include "timer.h" +#include "action_util.h" +#include "ringbuffer.hpp" +#include + +// These are the pin assignments for the 32u4 boards. +// You may define them to something else in your config.h +// if yours is wired up differently. +#ifndef AdafruitBleResetPin +#define AdafruitBleResetPin D4 +#endif + +#ifndef AdafruitBleCSPin +#define AdafruitBleCSPin B4 +#endif + +#ifndef AdafruitBleIRQPin +#define AdafruitBleIRQPin E6 +#endif + + +#define SAMPLE_BATTERY +#define ConnectionUpdateInterval 1000 /* milliseconds */ + +static struct { + bool is_connected; + bool initialized; + bool configured; + +#define ProbedEvents 1 +#define UsingEvents 2 + bool event_flags; + +#ifdef SAMPLE_BATTERY + uint16_t last_battery_update; + uint32_t vbat; +#endif + uint16_t last_connection_update; +} state; + +// Commands are encoded using SDEP and sent via SPI +// https://github.com/adafruit/Adafruit_BluefruitLE_nRF51/blob/master/SDEP.md + +#define SdepMaxPayload 16 +struct sdep_msg { + uint8_t type; + uint8_t cmd_low; + uint8_t cmd_high; + struct __attribute__((packed)) { + uint8_t len:7; + uint8_t more:1; + }; + uint8_t payload[SdepMaxPayload]; +} __attribute__((packed)); + +// The recv latency is relatively high, so when we're hammering keys quickly, +// we want to avoid waiting for the responses in the matrix loop. We maintain +// a short queue for that. Since there is quite a lot of space overhead for +// the AT command representation wrapped up in SDEP, we queue the minimal +// information here. + +enum queue_type { + QTKeyReport, // 1-byte modifier + 6-byte key report + QTConsumer, // 16-bit key code +#ifdef MOUSE_ENABLE + QTMouseMove, // 4-byte mouse report +#endif +}; + +struct queue_item { + enum queue_type queue_type; + uint16_t added; + union __attribute__((packed)) { + struct __attribute__((packed)) { + uint8_t modifier; + uint8_t keys[6]; + } key; + + uint16_t consumer; + struct __attribute__((packed)) { + uint8_t x, y, scroll, pan; + } mousemove; + }; +}; + +// Items that we wish to send +static RingBuffer send_buf; +// Pending response; while pending, we can't send any more requests. +// This records the time at which we sent the command for which we +// are expecting a response. +static RingBuffer resp_buf; + +static bool process_queue_item(struct queue_item *item, uint16_t timeout); + +enum sdep_type { + SdepCommand = 0x10, + SdepResponse = 0x20, + SdepAlert = 0x40, + SdepError = 0x80, + SdepSlaveNotReady = 0xfe, // Try again later + SdepSlaveOverflow = 0xff, // You read more data than is available +}; + +enum ble_cmd { + BleInitialize = 0xbeef, + BleAtWrapper = 0x0a00, + BleUartTx = 0x0a01, + BleUartRx = 0x0a02, +}; + +enum ble_system_event_bits { + BleSystemConnected = 0, + BleSystemDisconnected = 1, + BleSystemUartRx = 8, + BleSystemMidiRx = 10, +}; + +// The SDEP.md file says 2MHz but the web page and the sample driver +// both use 4MHz +#define SpiBusSpeed 4000000 + +#define SdepTimeout 150 /* milliseconds */ +#define SdepShortTimeout 10 /* milliseconds */ +#define SdepBackOff 25 /* microseconds */ +#define BatteryUpdateInterval 10000 /* milliseconds */ + +static bool at_command(const char *cmd, char *resp, uint16_t resplen, + bool verbose, uint16_t timeout = SdepTimeout); +static bool at_command_P(const char *cmd, char *resp, uint16_t resplen, + bool verbose = false); + +struct SPI_Settings { + uint8_t spcr, spsr; +}; + +static struct SPI_Settings spi; + +// Initialize 4Mhz MSBFIRST MODE0 +void SPI_init(struct SPI_Settings *spi) { + spi->spcr = _BV(SPE) | _BV(MSTR); + spi->spsr = _BV(SPI2X); + + static_assert(SpiBusSpeed == F_CPU / 2, "hard coded at 4Mhz"); + + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { + // Ensure that SS is OUTPUT High + digitalWrite(B0, PinLevelHigh); + pinMode(B0, PinDirectionOutput); + + SPCR |= _BV(MSTR); + SPCR |= _BV(SPE); + pinMode(B1 /* SCK */, PinDirectionOutput); + pinMode(B2 /* MOSI */, PinDirectionOutput); + } +} + +static inline void SPI_begin(struct SPI_Settings*spi) { + SPCR = spi->spcr; + SPSR = spi->spsr; +} + +static inline uint8_t SPI_TransferByte(uint8_t data) { + SPDR = data; + asm volatile("nop"); + while (!(SPSR & _BV(SPIF))) { + ; // wait + } + return SPDR; +} + +static inline void spi_send_bytes(const uint8_t *buf, uint8_t len) { + if (len == 0) return; + const uint8_t *end = buf + len; + while (buf < end) { + SPDR = *buf; + while (!(SPSR & _BV(SPIF))) { + ; // wait + } + ++buf; + } +} + +static inline uint16_t spi_read_byte(void) { + return SPI_TransferByte(0x00 /* dummy */); +} + +static inline void spi_recv_bytes(uint8_t *buf, uint8_t len) { + const uint8_t *end = buf + len; + if (len == 0) return; + while (buf < end) { + SPDR = 0; // write a dummy to initiate read + while (!(SPSR & _BV(SPIF))) { + ; // wait + } + *buf = SPDR; + ++buf; + } +} + +#if 0 +static void dump_pkt(const struct sdep_msg *msg) { + print("pkt: type="); + print_hex8(msg->type); + print(" cmd="); + print_hex8(msg->cmd_high); + print_hex8(msg->cmd_low); + print(" len="); + print_hex8(msg->len); + print(" more="); + print_hex8(msg->more); + print("\n"); +} +#endif + +// Send a single SDEP packet +static bool sdep_send_pkt(const struct sdep_msg *msg, uint16_t timeout) { + SPI_begin(&spi); + + digitalWrite(AdafruitBleCSPin, PinLevelLow); + uint16_t timerStart = timer_read(); + bool success = false; + bool ready = false; + + do { + ready = SPI_TransferByte(msg->type) != SdepSlaveNotReady; + if (ready) { + break; + } + + // Release it and let it initialize + digitalWrite(AdafruitBleCSPin, PinLevelHigh); + _delay_us(SdepBackOff); + digitalWrite(AdafruitBleCSPin, PinLevelLow); + } while (timer_elapsed(timerStart) < timeout); + + if (ready) { + // Slave is ready; send the rest of the packet + spi_send_bytes(&msg->cmd_low, + sizeof(*msg) - (1 + sizeof(msg->payload)) + msg->len); + success = true; + } + + digitalWrite(AdafruitBleCSPin, PinLevelHigh); + + return success; +} + +static inline void sdep_build_pkt(struct sdep_msg *msg, uint16_t command, + const uint8_t *payload, uint8_t len, + bool moredata) { + msg->type = SdepCommand; + msg->cmd_low = command & 0xff; + msg->cmd_high = command >> 8; + msg->len = len; + msg->more = (moredata && len == SdepMaxPayload) ? 1 : 0; + + static_assert(sizeof(*msg) == 20, "msg is correctly packed"); + + memcpy(msg->payload, payload, len); +} + +// Read a single SDEP packet +static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) { + bool success = false; + uint16_t timerStart = timer_read(); + bool ready = false; + + do { + ready = digitalRead(AdafruitBleIRQPin); + if (ready) { + break; + } + _delay_us(1); + } while (timer_elapsed(timerStart) < timeout); + + if (ready) { + SPI_begin(&spi); + + digitalWrite(AdafruitBleCSPin, PinLevelLow); + + do { + // Read the command type, waiting for the data to be ready + msg->type = spi_read_byte(); + if (msg->type == SdepSlaveNotReady || msg->type == SdepSlaveOverflow) { + // Release it and let it initialize + digitalWrite(AdafruitBleCSPin, PinLevelHigh); + _delay_us(SdepBackOff); + digitalWrite(AdafruitBleCSPin, PinLevelLow); + continue; + } + + // Read the rest of the header + spi_recv_bytes(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload))); + + // and get the payload if there is any + if (msg->len <= SdepMaxPayload) { + spi_recv_bytes(msg->payload, msg->len); + } + success = true; + break; + } while (timer_elapsed(timerStart) < timeout); + + digitalWrite(AdafruitBleCSPin, PinLevelHigh); + } + return success; +} + +static void resp_buf_read_one(bool greedy) { + uint16_t last_send; + if (!resp_buf.peek(last_send)) { + return; + } + + if (digitalRead(AdafruitBleIRQPin)) { + struct sdep_msg msg; + +again: + if (sdep_recv_pkt(&msg, SdepTimeout)) { + if (!msg.more) { + // We got it; consume this entry + resp_buf.get(last_send); + dprintf("recv latency %dms\n", TIMER_DIFF_16(timer_read(), last_send)); + } + + if (greedy && resp_buf.peek(last_send) && digitalRead(AdafruitBleIRQPin)) { + goto again; + } + } + + } else if (timer_elapsed(last_send) > SdepTimeout * 2) { + dprintf("waiting_for_result: timeout, resp_buf size %d\n", + (int)resp_buf.size()); + + // Timed out: consume this entry + resp_buf.get(last_send); + } +} + +static void send_buf_send_one(uint16_t timeout = SdepTimeout) { + struct queue_item item; + + // Don't send anything more until we get an ACK + if (!resp_buf.empty()) { + return; + } + + if (!send_buf.peek(item)) { + return; + } + if (process_queue_item(&item, timeout)) { + // commit that peek + send_buf.get(item); + dprintf("send_buf_send_one: have %d remaining\n", (int)send_buf.size()); + } else { + dprint("failed to send, will retry\n"); + _delay_ms(SdepTimeout); + resp_buf_read_one(true); + } +} + +static void resp_buf_wait(const char *cmd) { + bool didPrint = false; + while (!resp_buf.empty()) { + if (!didPrint) { + dprintf("wait on buf for %s\n", cmd); + didPrint = true; + } + resp_buf_read_one(true); + } +} + +static bool ble_init(void) { + state.initialized = false; + state.configured = false; + state.is_connected = false; + + pinMode(AdafruitBleIRQPin, PinDirectionInput); + pinMode(AdafruitBleCSPin, PinDirectionOutput); + digitalWrite(AdafruitBleCSPin, PinLevelHigh); + + SPI_init(&spi); + + // Perform a hardware reset + pinMode(AdafruitBleResetPin, PinDirectionOutput); + digitalWrite(AdafruitBleResetPin, PinLevelHigh); + digitalWrite(AdafruitBleResetPin, PinLevelLow); + _delay_ms(10); + digitalWrite(AdafruitBleResetPin, PinLevelHigh); + + _delay_ms(1000); // Give it a second to initialize + + state.initialized = true; + return state.initialized; +} + +static inline uint8_t min(uint8_t a, uint8_t b) { + return a < b ? a : b; +} + +static bool read_response(char *resp, uint16_t resplen, bool verbose) { + char *dest = resp; + char *end = dest + resplen; + + while (true) { + struct sdep_msg msg; + + if (!sdep_recv_pkt(&msg, 2 * SdepTimeout)) { + dprint("sdep_recv_pkt failed\n"); + return false; + } + + if (msg.type != SdepResponse) { + *resp = 0; + return false; + } + + uint8_t len = min(msg.len, end - dest); + if (len > 0) { + memcpy(dest, msg.payload, len); + dest += len; + } + + if (!msg.more) { + // No more data is expected! + break; + } + } + + // Ensure the response is NUL terminated + *dest = 0; + + // "Parse" the result text; we want to snip off the trailing OK or ERROR line + // Rewind past the possible trailing CRLF so that we can strip it + --dest; + while (dest > resp && (dest[0] == '\n' || dest[0] == '\r')) { + *dest = 0; + --dest; + } + + // Look back for start of preceeding line + char *last_line = strrchr(resp, '\n'); + if (last_line) { + ++last_line; + } else { + last_line = resp; + } + + bool success = false; + static const char kOK[] PROGMEM = "OK"; + + success = !strcmp_P(last_line, kOK ); + + if (verbose || !success) { + dprintf("result: %s\n", resp); + } + return success; +} + +static bool at_command(const char *cmd, char *resp, uint16_t resplen, + bool verbose, uint16_t timeout) { + const char *end = cmd + strlen(cmd); + struct sdep_msg msg; + + if (verbose) { + dprintf("ble send: %s\n", cmd); + } + + if (resp) { + // They want to decode the response, so we need to flush and wait + // for all pending I/O to finish before we start this one, so + // that we don't confuse the results + resp_buf_wait(cmd); + *resp = 0; + } + + // Fragment the command into a series of SDEP packets + while (end - cmd > SdepMaxPayload) { + sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, SdepMaxPayload, true); + if (!sdep_send_pkt(&msg, timeout)) { + return false; + } + cmd += SdepMaxPayload; + } + + sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, end - cmd, false); + if (!sdep_send_pkt(&msg, timeout)) { + return false; + } + + if (resp == NULL) { + auto now = timer_read(); + while (!resp_buf.enqueue(now)) { + resp_buf_read_one(false); + } + auto later = timer_read(); + if (TIMER_DIFF_16(later, now) > 0) { + dprintf("waited %dms for resp_buf\n", TIMER_DIFF_16(later, now)); + } + return true; + } + + return read_response(resp, resplen, verbose); +} + +bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) { + auto cmdbuf = (char *)alloca(strlen_P(cmd) + 1); + strcpy_P(cmdbuf, cmd); + return at_command(cmdbuf, resp, resplen, verbose); +} + +bool adafruit_ble_is_connected(void) { + return state.is_connected; +} + +bool adafruit_ble_enable_keyboard(void) { + char resbuf[128]; + + if (!state.initialized && !ble_init()) { + return false; + } + + state.configured = false; + + // Disable command echo + static const char kEcho[] PROGMEM = "ATE=0"; + // Make the advertised name match the keyboard + static const char kGapDevName[] PROGMEM = + "AT+GAPDEVNAME=" STR(PRODUCT) " " STR(DESCRIPTION); + // Turn on keyboard support + static const char kHidEnOn[] PROGMEM = "AT+BLEHIDEN=1"; + + // Adjust intervals to improve latency. This causes the "central" + // system (computer/tablet) to poll us every 10-30 ms. We can't + // set a smaller value than 10ms, and 30ms seems to be the natural + // processing time on my macbook. Keeping it constrained to that + // feels reasonable to type to. + static const char kGapIntervals[] PROGMEM = "AT+GAPINTERVALS=10,30,,"; + + // Reset the device so that it picks up the above changes + static const char kATZ[] PROGMEM = "ATZ"; + + // Turn down the power level a bit + static const char kPower[] PROGMEM = "AT+BLEPOWERLEVEL=-12"; + static PGM_P const configure_commands[] PROGMEM = { + kEcho, + kGapIntervals, + kGapDevName, + kHidEnOn, + kPower, + kATZ, + }; + + uint8_t i; + for (i = 0; i < sizeof(configure_commands) / sizeof(configure_commands[0]); + ++i) { + PGM_P cmd; + memcpy_P(&cmd, configure_commands + i, sizeof(cmd)); + + if (!at_command_P(cmd, resbuf, sizeof(resbuf))) { + dprintf("failed BLE command: %S: %s\n", cmd, resbuf); + goto fail; + } + } + + state.configured = true; + + // Check connection status in a little while; allow the ATZ time + // to kick in. + state.last_connection_update = timer_read(); +fail: + return state.configured; +} + +static void set_connected(bool connected) { + if (connected != state.is_connected) { + if (connected) { + print("****** BLE CONNECT!!!!\n"); + } else { + print("****** BLE DISCONNECT!!!!\n"); + } + state.is_connected = connected; + + // TODO: if modifiers are down on the USB interface and + // we cut over to BLE or vice versa, they will remain stuck. + // This feels like a good point to do something like clearing + // the keyboard and/or generating a fake all keys up message. + // However, I've noticed that it takes a couple of seconds + // for macOS to to start recognizing key presses after BLE + // is in the connected state, so I worry that doing that + // here may not be good enough. + } +} + +void adafruit_ble_task(void) { + char resbuf[48]; + + if (!state.configured && !adafruit_ble_enable_keyboard()) { + return; + } + resp_buf_read_one(true); + send_buf_send_one(SdepShortTimeout); + + if (resp_buf.empty() && (state.event_flags & UsingEvents) && + digitalRead(AdafruitBleIRQPin)) { + // Must be an event update + if (at_command_P(PSTR("AT+EVENTSTATUS"), resbuf, sizeof(resbuf))) { + uint32_t mask = strtoul(resbuf, NULL, 16); + + if (mask & BleSystemConnected) { + set_connected(true); + } else if (mask & BleSystemDisconnected) { + set_connected(false); + } + } + } + + if (timer_elapsed(state.last_connection_update) > ConnectionUpdateInterval) { + bool shouldPoll = true; + if (!(state.event_flags & ProbedEvents)) { + // Request notifications about connection status changes. + // This only works in SPIFRIEND firmware > 0.6.7, which is why + // we check for this conditionally here. + // Note that at the time of writing, HID reports only work correctly + // with Apple products on firmware version 0.6.7! + // https://forums.adafruit.com/viewtopic.php?f=8&t=104052 + if (at_command_P(PSTR("AT+EVENTENABLE=0x1"), resbuf, sizeof(resbuf))) { + at_command_P(PSTR("AT+EVENTENABLE=0x2"), resbuf, sizeof(resbuf)); + state.event_flags |= UsingEvents; + } + state.event_flags |= ProbedEvents; + + // leave shouldPoll == true so that we check at least once + // before relying solely on events + } else { + shouldPoll = false; + } + + static const char kGetConn[] PROGMEM = "AT+GAPGETCONN"; + state.last_connection_update = timer_read(); + + if (at_command_P(kGetConn, resbuf, sizeof(resbuf))) { + set_connected(atoi(resbuf)); + } + } + +#ifdef SAMPLE_BATTERY + // I don't know if this really does anything useful yet; the reported + // voltage level always seems to be around 3200mV. We may want to just rip + // this code out. + if (timer_elapsed(state.last_battery_update) > BatteryUpdateInterval && + resp_buf.empty()) { + state.last_battery_update = timer_read(); + + if (at_command_P(PSTR("AT+HWVBAT"), resbuf, sizeof(resbuf))) { + state.vbat = atoi(resbuf); + } + } +#endif +} + +static bool process_queue_item(struct queue_item *item, uint16_t timeout) { + char cmdbuf[48]; + char fmtbuf[64]; + + // Arrange to re-check connection after keys have settled + state.last_connection_update = timer_read(); + +#if 1 + if (TIMER_DIFF_16(state.last_connection_update, item->added) > 0) { + dprintf("send latency %dms\n", + TIMER_DIFF_16(state.last_connection_update, item->added)); + } +#endif + + switch (item->queue_type) { + case QTKeyReport: + strcpy_P(fmtbuf, + PSTR("AT+BLEKEYBOARDCODE=%02x-00-%02x-%02x-%02x-%02x-%02x-%02x")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->key.modifier, + item->key.keys[0], item->key.keys[1], item->key.keys[2], + item->key.keys[3], item->key.keys[4], item->key.keys[5]); + return at_command(cmdbuf, NULL, 0, true, timeout); + + case QTConsumer: + strcpy_P(fmtbuf, PSTR("AT+BLEHIDCONTROLKEY=0x%04x")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->consumer); + return at_command(cmdbuf, NULL, 0, true, timeout); + +#ifdef MOUSE_ENABLE + case QTMouseMove: + strcpy_P(fmtbuf, PSTR("AT+BLEHIDMOUSEMOVE=%d,%d,%d,%d")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->mousemove.x, + item->mousemove.y, item->mousemove.scroll, item->mousemove.pan); + return at_command(cmdbuf, NULL, 0, true, timeout); +#endif + default: + return true; + } +} + +bool adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, + uint8_t nkeys) { + struct queue_item item; + bool didWait = false; + + item.queue_type = QTKeyReport; + item.key.modifier = hid_modifier_mask; + item.added = timer_read(); + + while (nkeys >= 0) { + item.key.keys[0] = keys[0]; + item.key.keys[1] = nkeys >= 1 ? keys[1] : 0; + item.key.keys[2] = nkeys >= 2 ? keys[2] : 0; + item.key.keys[3] = nkeys >= 3 ? keys[3] : 0; + item.key.keys[4] = nkeys >= 4 ? keys[4] : 0; + item.key.keys[5] = nkeys >= 5 ? keys[5] : 0; + + if (!send_buf.enqueue(item)) { + if (!didWait) { + dprint("wait for buf space\n"); + didWait = true; + } + send_buf_send_one(); + continue; + } + + if (nkeys <= 6) { + return true; + } + + nkeys -= 6; + keys += 6; + } + + return true; +} + +bool adafruit_ble_send_consumer_key(uint16_t keycode, int hold_duration) { + struct queue_item item; + + item.queue_type = QTConsumer; + item.consumer = keycode; + + while (!send_buf.enqueue(item)) { + send_buf_send_one(); + } + return true; +} + +#ifdef MOUSE_ENABLE +bool adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, + int8_t pan) { + struct queue_item item; + + item.queue_type = QTMouseMove; + item.mousemove.x = x; + item.mousemove.y = y; + item.mousemove.scroll = scroll; + item.mousemove.pan = pan; + + while (!send_buf.enqueue(item)) { + send_buf_send_one(); + } + return true; +} +#endif + +uint32_t adafruit_ble_read_battery_voltage(void) { + return state.vbat; +} + +bool adafruit_ble_set_mode_leds(bool on) { + if (!state.configured) { + return false; + } + + // The "mode" led is the red blinky one + at_command_P(on ? PSTR("AT+HWMODELED=1") : PSTR("AT+HWMODELED=0"), NULL, 0); + + // Pin 19 is the blue "connected" LED; turn that off too. + // When turning LEDs back on, don't turn that LED on if we're + // not connected, as that would be confusing. + at_command_P(on && state.is_connected ? PSTR("AT+HWGPIO=19,1") + : PSTR("AT+HWGPIO=19,0"), + NULL, 0); + return true; +} + +// https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/ble-generic#at-plus-blepowerlevel +bool adafruit_ble_set_power_level(int8_t level) { + char cmd[46]; + if (!state.configured) { + return false; + } + snprintf(cmd, sizeof(cmd), "AT+BLEPOWERLEVEL=%d", level); + return at_command(cmd, NULL, 0, false); +} diff --git a/tmk_core/protocol/lufa/adafruit_ble.h b/tmk_core/protocol/lufa/adafruit_ble.h new file mode 100644 index 0000000000..351fd55ae9 --- /dev/null +++ b/tmk_core/protocol/lufa/adafruit_ble.h @@ -0,0 +1,60 @@ +/* Bluetooth Low Energy Protocol for QMK. + * Author: Wez Furlong, 2016 + * Supports the Adafruit BLE board built around the nRF51822 chip. + */ +#pragma once +#ifdef ADAFRUIT_BLE_ENABLE +#include +#include +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/* Instruct the module to enable HID keyboard support and reset */ +extern bool adafruit_ble_enable_keyboard(void); + +/* Query to see if the BLE module is connected */ +extern bool adafruit_ble_query_is_connected(void); + +/* Returns true if we believe that the BLE module is connected. + * This uses our cached understanding that is maintained by + * calling ble_task() periodically. */ +extern bool adafruit_ble_is_connected(void); + +/* Call this periodically to process BLE-originated things */ +extern void adafruit_ble_task(void); + +/* Generates keypress events for a set of keys. + * The hid modifier mask specifies the state of the modifier keys for + * this set of keys. + * Also sends a key release indicator, so that the keys do not remain + * held down. */ +extern bool adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, + uint8_t nkeys); + +/* Send a consumer keycode, holding it down for the specified duration + * (milliseconds) */ +extern bool adafruit_ble_send_consumer_key(uint16_t keycode, int hold_duration); + +#ifdef MOUSE_ENABLE +/* Send a mouse/wheel movement report. + * The parameters are signed and indicate positive of negative direction + * change. */ +extern bool adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, + int8_t pan); +#endif + +/* Compute battery voltage by reading an analog pin. + * Returns the integer number of millivolts */ +extern uint32_t adafruit_ble_read_battery_voltage(void); + +extern bool adafruit_ble_set_mode_leds(bool on); +extern bool adafruit_ble_set_power_level(int8_t level); + +#ifdef __cplusplus +} +#endif + +#endif // ADAFRUIT_BLE_ENABLE diff --git a/tmk_core/protocol/lufa/ringbuffer.hpp b/tmk_core/protocol/lufa/ringbuffer.hpp new file mode 100644 index 0000000000..70a3c4881d --- /dev/null +++ b/tmk_core/protocol/lufa/ringbuffer.hpp @@ -0,0 +1,66 @@ +#pragma once +// A simple ringbuffer holding Size elements of type T +template +class RingBuffer { + protected: + T buf_[Size]; + uint8_t head_{0}, tail_{0}; + public: + inline uint8_t nextPosition(uint8_t position) { + return (position + 1) % Size; + } + + inline uint8_t prevPosition(uint8_t position) { + if (position == 0) { + return Size - 1; + } + return position - 1; + } + + inline bool enqueue(const T &item) { + static_assert(Size > 1, "RingBuffer size must be > 1"); + uint8_t next = nextPosition(head_); + if (next == tail_) { + // Full + return false; + } + + buf_[head_] = item; + head_ = next; + return true; + } + + inline bool get(T &dest, bool commit = true) { + auto tail = tail_; + if (tail == head_) { + // No more data + return false; + } + + dest = buf_[tail]; + tail = nextPosition(tail); + + if (commit) { + tail_ = tail; + } + return true; + } + + inline bool empty() const { return head_ == tail_; } + + inline uint8_t size() const { + int diff = head_ - tail_; + if (diff >= 0) { + return diff; + } + return Size + diff; + } + + inline T& front() { + return buf_[tail_]; + } + + inline bool peek(T &item) { + return get(item, false); + } +}; From e26a80508f2247d27e431a7415df1ff3405f598a Mon Sep 17 00:00:00 2001 From: Olivier Date: Mon, 28 Nov 2016 11:20:00 +0100 Subject: [PATCH 077/124] Reorganize the numeric keypad layer more like a traditional numeric keypad. --- keyboards/ergodox/keymaps/bepo/bepo.png | Bin 80838 -> 80249 bytes keyboards/ergodox/keymaps/bepo/keymap.c | 24 ++++++++++++------------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/keyboards/ergodox/keymaps/bepo/bepo.png b/keyboards/ergodox/keymaps/bepo/bepo.png index bde2e2cfacb326e7934c5743aea2f303c8a42527..54992f5ae54c6c38b29221a78c45224af611573f 100644 GIT binary patch literal 80249 zcmafb1yogSx3vLCDWP-;3I^SRB7&5pAkv5K5TqNW8xaHqq(y0tNOyyDhe#tO0wSS= z|Jvvq-@W(0_Z^JkE5g~&e)f9SnrqIvcF=u!$+NhWxF=4WID1b@OzFf44AK)PPQJy) zg717AH^x43;^K*WVj{}UiCMGo%HPVL&&-7`88ktg{I z13cm?i*H*LzkF=0GtpDC?xu5V--Xs?{@2lfDNn@0;$m`JcQ>D*v9b3>?7zR#PKHTr z{d!kaboR%OAN7=BpV5-E2kh+ZJ=`~MY9=Qngv`$BD=RA#Vu<|xrFNB_UGni`PFp*> z)IQVD^78UatlT8<5!-%#epShr|M^M6hBt+Ugp^?t1%0NpZkL6He~HPb>s^z_-uZ z4ewvQaKmQ$#Comd@1NEb6`~T^I1NADhkNqmNgF%6#&DXODJnUU&!00~SH4c-_+|7Y zKR>_a*gL=7sVm1<^kq#+3cI-H16MSCIz6phR$fle#umP-KcJ{@U@-Ifvp;-u(yQS2 zeQ6zE0S~#tDO|r(l}_uAo^M1&MWrfb5z^9z+bwqE1h=(GB?^1dwzs#-b-Rt^qhOU) zzqE0VmssZO%I7^z2K$kQNli_iEB`tqEKFQl8rNQshTNa%0xvJGl(h7_#JR>r)~I&p zU)99N*R{dfw#2AsH)J6c!@KpZ?UKryx8f2KX_=Y+yWWG;uGO?eL_{h*hmn%BGl#p< z$4{=Faj=L8qxKp4j!n2qj<~b)4f*8TtjH$tP|96m?IOv7#cpZ`YRpZP+vNsFN6-F# z;%*s(r|SBJkTgU&i7D9j-StG&t+Xl~()u`RV=qz8uGCfc0J@&oCrf zd9Hca;SREBQORtf6Wf*z{;qt>cUw-?;~X6wJ?mKLVv1^N61#l)GIlWhnX{O!k~1?m z=fkR5Qpl#Xzq8g@)N>n;jEqb+`8JJ4UQCoIw~;+x3x0dk=ox2&_gMIi)5ArUJ!p`t`u0Ye6V#QM;GI3&T=(=etB|IiUTT*c-$P~I&vNa} z7MG3+Oqes1!q!)xOw+=XlV6&u6%MBs=)e5*G9#l%mNEk$AE|k<#{H(27E$=ywQE`J zE_4F67__vsxxva35?HR^m!4AbKT65Sz!=DsYYZk~zQL?i%7riInO|;Ehmp);XhL~k z@llfrGv4M}4DqnIboS=#zToizNxd{g`$VosMN2ERmDUaajY6`7nc20^oiBZwL&!e9 zH(_SyZg5f~olVP8RM+$VMaf#?p(rbqa3UYmTN8PHspYJm`uh6MA|v~jAAA_q<$4MK z`!p_&JSRNc$LDkogTvm2o@_i%yDc>_u{Wnd%jkQlSNlb{IkBW_;psgO=Ng^1)XA=8 zwS>U^BP;R^S9UwWC-m{POzg(s0|oW)Uwd-|RR`ZX_}0db%JW;lZ;r*x#RZzPyiAb% zk98Qrew>SHZ*udt2p=xlGwaxLb#QQyl96d_@WVqto|8x*&B6+m;O4TXD%{>;pdLlF zR7l<9)ppl8gB${S`;76^h09~v+1b-@D$^w+7;fIA8hE47YLe_>Jdl)^Iqqv_P(*Yz zB6NXtQ18lP! zhn{a0(&}M2>?V4jbH=W+>Hn%qQl8tMj=SaYljq>@aC6KgIVc!HZu=%QASUs3I*y zHB}z`JBpr}_gmz!y^;?&edb)<$Bzj`3`6~)nEraYy$PF(>o1(G9oa~-f^oH~T}fc$ zY@D20-x+ljnh#x9MBB`W;*)cnINaZD9m-K<9f?zRAi|(On-QO$@m2Uf{<8t)~BqulGdc3pIh&26CXyM#&_kG54hhW(c;ZRZ}4;)Ba2ChuVQEIV?bj7 zfo6EehY!8Q7OLd9Ht|`6oW`6v&=X%HEhp%xA{0-CcyDdk=rPKTBIy&&+e5y=c zA{{j6<+B>cP*6}X<)Lg}nZ0REgi(K1sY_95h!LVUEWay(-(Y)XD8?YF-B*&%BRWbQ zuWQ><#H|DECb@iis$DnHNhMt!Z)db<^HnMK*W*Q%+*^+jJ}R`_+*-*gm`(ONnz{VA z_UCyjnreY|B1wGA>`>h&O{^+Dt%3Qek_-#TbsJk- zML%7Yl!#|%XE7w*-K&NkMmmj|YdlQyUu_b?}Qe>ytuXCabAVW8ps;v-~U;Tb#6( zmW^dM)z+Mcf7;xlbMMd;^FX`j=~$;#kK=3;4nFk_!bguDsg>E#o12?kP8Ny#e`>6{ zRvyR4N2Mvu?kzvEw=31+?E%HJ9>?;zwx{Q9*Xq>C&#n;6r+X`isOeq|;Ul@&vCiqbB(6?( zUaEl>+{oBZdmdU8cyL^ue=Nk#%+EIkWyaX^>hi>+4Ij}$cn{4N$JlQ#51i4{ z)05MFkTZ1u`U@#Jx#ln`evIbr)e#~J3Nwf1#lk|4?_b6qysOyj*2EC8@lm#mR(3!y zpZxAB1jm|1tHzxILa=n%Qr4$FG~PVQFJal0sc-5@TuIW zF1l~5%x>VstM1Sz+v3;*4E*2kwINR9yXzi4Zw%L1Qi;>H0UWD#V%zyj#>IG8L zZ?sXLd(Des6I2pLVoG|6E7@wcNJR)IE)G!}SyyPRSQ+;ug$)iW%Xdd~{Zzzn)SWYD z{c7uenoU_Sdo{tjroR8R3~OuYqfZS`+bjm0X>O{8uj!C#hTHLAbtc6%Y9KNAJCEpA zHY?n_7qoCgP>_YH|Gqhxb%45CFnIcO)`{8ZnQK& zl0rMKX@pX6W8wOVDnqrwVOGt5Uva8p(7u@QWkQ#6qM!q=$No-pd(;&HW+hgu4pTnv zz_9F=_m9VJ(5cIb2m7(5_XS2?k`#Tdl$w(A#Ll2zqe_+ut7EFW@x^5t>EN(L3cMXc zcFnC6k=7S%HLG~YX8Tez4o!5FBEOn?H-LegJF3XeBF}{TC3%(b6|x`Ya@N7uw1*uS znV4qVuOy4v+Hy(D$Z&ccxx-%C@-dHURP`6EZnl`7CuLY?g7ezRoFq;|5GRoz5 z-98OzQmf47=>Wq};yz085mK`!lVUS6ji?{S^(Fj^0LSkZlhdaSR&z=#s8FIZhqYt~`ao2sLtZz3MdV&yAZmp={G4WwNMh-oIycB03-Rr zROO0s7@K!jy?#0fO}>2Dp%JUR9+Z(CBF9RYi{>!vznrUH)RNui>xbqlsJsUl=#4%c}jot)6H4TG4Gy^|o?0O@rP9^kawW@|2O6n?G7L zLSsyxqwf$phTpeUcAI9{H8wWZZ}7#jdHlGZxuD7$@Z)Gz=KSLDOnNhB+$|*^0@C?Q zH>38&&vhAdC%JtUn4h1wNm~?wV|&7w+h;7wHifmYhVKcvIV0U12QM!P8yj0&TU%YV z+b)O0it?B7;*QMC3b&3YBNC=5<(jo&pT`OCh-@>wi`lX!&)<7UmY{J_%|L`HN*&d= zGus?;KTEl-r$-VpO-fr=m$;=R%k11-LSm^>mRL`c5Mxe=T>r;HJ)a?=NWc%4G2eF% z3p!Vl+8(}m&n%{Cf3HgoK`?6{OIbgfJ}w`zv#T(cYZG}?QvWVYMRUiMwEu=|U{1Yn zY*FD--mQ*pG3WrzFDvp2&Wao1*`-K?$lgsM5&n^X97hPH#gag*C!tl z>lOvK4;#t5TLJ~w;6J$1;(^noQeM?&1Z@!$kF{aoYZb?x8;0aq!Ur3tf9|Y>EGD^~ z14toYf)`qHp+GoXRe!w9vNI{#=dkia{4L5c0CoRtLTY))RW2@K5)zU`t*a#|xw)My zy5_6`QV(ORFWb?JR^+Z`=jHi9L|@@HqRlLy%^7(KK|Exd8LBq7-MaaKNrDC0eu^Xll$P$83$a4@h z5LqH48qqw!#>`sLCzt-bler43e+sqG|11?2()z@4oaDEjoS&bFw>ZVUzQpO0ffX|O zp%FSB_xEKd#?)smPqnLE#GcjjjZPP=%%r~MOo+51AFXS{$h4hLA~5>ZO(#o@2S?}f z8lVp$D$K{Wmg}ysc;VM}$>6Cy4&k+x=PN=)WSYKF=sRRY%M2*T*D`r3bHyXtjR5c9 z_@f_v65QL{v$1^yp&soh7r@)G(uD!(pl*>(lG&1b(7=1M#*zZ>bFe3>o;cDR;lVw9!?d zi0M9WBDeg-8Hc1_yu$a6q#GX>scB&(Tffmr1puYq*D_?$(b4vM6Qj8_^&I&2g4`|6 zMrmmirrf9!3C;TfPR8^4?{A%_W4~5dL1JW4v6s({fDuAFWs{+3s6u+*=G$ZD#>X}6 z*TzX+zkbb^a}7W+`t#E@@@@Dm{C21Sd311T%;o3dY<$H}LNO^VGeYdgUgQJz5|fnF z40jNuq4oH#sQgfUYCM~jX9PpLHuvs_*BTvY2-X|xP@zLAadNNn>n|VNGR0dd+%(90 zX!jI2h-bIm7vDm{sBdn@1O_3@lP#*K(Y|Gr zx$2HnY8*>lmMO1aVbD0szT^_`6)_88 zD;mT16Mg#qyM1?e-s`-OmD;HKeixUvijVJ~jm?RRRrpFuI*5ylrz#}hhVIO#&s6Nr zojd87g_qzym~t#Q9c1~qtXK88IB%4d<|;n8`q_C%IYGB~#CmR}Rw86Jt!0%J`Ypo# zH{7<$+S*A&bDf>CNKq<#JcpGj|7zS+Z?c<%6fj?s=T9>+aq)UXF8YfXPt3K16~VbC z?~LQTP1U}lAtR^$gLb!46q~5u$gAS{^XDA)OZTDsI)Gp(HP#<3|0Oz67-~O_8$9drOrQ>-}JpvpzBN&D7x1;uB}l~ z6Hdd@8oCL@1``$4?fx_=&DL_Z8g$7j=5cKjj8Au58}~Cwa>45E?k2zOeuImPtBwO- z>A?feM-w+XlZEM$l9J@YDf~t3?Rot1DZFbu_8WS72m}PSHA#S|p@9`a$?9FU=gYf> zgM+iNv*VwW!_1_R6q=ixsmW-Ef~2uhxY4C0OYtg-xuvw^B$Sea2 z!eP+rDyym*09mm2t%Dueudi+^D=T3)f!Z*KYFV32C?XtVm%ZBglKaNvSqyUj`c^ux zQ0QGJ4Tj<&vhNJGh?<&St*Wl3k7}P@TML6_rg{B38ZEU>*7a%N6F|BQW|iDJg9xEv zvzCUw6kGSo*BCX8@8Ddcy#4I&Ns>)D_(QX_Bo+RltIH3%<9t-5e|$V8i%tzSo%_Z~ z^2|xKrOE1>NZ_&#(djU8Y6-v}%d;0R{9baKl$d(r zGHP3zKYbep*ve*mPzo;Ozt^9@p@2o6cvRuolWnz{L8NomK z;jW~uvXxby(Xg6>1Mlr0^XEGg_zCbIShJK>R5TcJsSBOM#ceqFvBjGFdSH3_%NI+R zSD~2wjD{#8ikUKX`v@Cm{hKG}?S^5ZqRsyIrT^|MvgQvzUHU$=o-LI-5ZU&Pr z6Egsp>HB?IDjXLF=V@##88FC@s?X5~4z{U5;K%IVcBdvM4-^j}RSyr7xYR!|z>0SR z@KJ?tc8;{FpAP#Wg8)jabrlG^8237kZEir?FS|@w+{<^4;?IyQFon`QZ~qaBNv}WB za;lLdj?an`+B)Cbqn|m7kBQ9h1D2-MS`u{nN)5sNc=s!6a{GRj6d4^)=?SLaNBH^i z5r&4O(UeCty-)XGZxi_x@=ONb&fjl-8(M#-A_)VXoEBBCudv>BheR=oSR!)@3O_t{oG!CWjmSd{tZW3 zTH0o*mmV^xA}pQUAKEY)m0Y!xs;a6GlNu@tH9!=l`)lT@Xoh?3ukj<9ZoOuoO(L8+ zs4rde5-V%o&`54x?<6V8eT2gMVp-~?@>1X^Arar5s`21--?K@)8lrT z0RioNQHQh85On?uhi=`8jEsyrOTP5{{By=dyo|kM&|dW z5C0_8lnLfrQn5A;jON6TIk(d0?SU!H2nofk$MUnsA;`C9ynOi%M9a!h4nzw)C6Rmg za6AvURjc{mCZqa?Ki@$eu zTQ1bk*Vk8~r6Ezkj?yE%w3Hu+vHxl7WXdW$rEff;yjv`1zcyBMW^;4%Ren}gCbbBT z@I5YVC7J-Mq2^3d00%x{_K#DT0aQ;;PKG6|%~P@24-F5`4yo!aSW%7Ok+C7ijpy9Q z6lQjI0*yRUiF6{Uf`|ekpL8n-`FBX#F}r^L{(${1;QB4_`qV$UlH`1<)OzaCCa*=$ z%~J6{8#R4>H|E8Q`k|rX_8w4bW@cud0v_q;;j^9$Jv!V^FDoPGdWjEAhibmo(})NH z_HtFzXKZ>aT=Ai!RJ-Y2_FYh|CDPFkc$+^3H71RsM)!6X_pJ9w2VbsSKF^*N-ng@* z{{XK|Ev3FCf$fE~A0)y+B~>vojPI`13*3%hCxX1aPfZr{qzo(*5)t*yIIn%GBm+z) zWG&dHW?GpKJ%B+|Ako|GY*BS}3V#B+aG-8y$BQkTzo1)F`b_UXc;Is{iiwwtl$wTS zb1~Vg!IVdTbvO^wYe_D;cfx{z3J-SrDl4l|-k(4o?N{SS=-Qi)Qh?eww6qAl-&MB! zDT|{oV?|e4SOD8xL4AzYx$B^5Byc0& z&?>j}Bcs8;+al^_|Ki09y_LZ%=zgC9?ulVT;Z|!C0DHX95!(pRxY7S?BOIHJua)cG zdMjamkfsgB-jsdjB3m%nf#D-IbCoC)sUGx(@^3GQ`5nijl_Sd2H1v0Y6#>UgY#W5JvOH{z= z*F4B?3&sATvi6SJ`t~lPlI?TW*75}bHTwghke7sRl73I@wr`R;_@i~%g+3P49t9T` z7Rrz4@+F{m8zRb*yl6g9Me?NI^eXc{1wr4E_jT&RNf0ZHWk zdW7fC`#}D6P*VkR3iL?eQG<>}#=t;qAYgJ9KMgwz?M~QrUJVW;iRCq$7uiEOq zY2}%h{ugp_vx`>BYI>j`&p=y={{ia@J({sh(h~T48L`+AF6?vw?6N z{r|i@Wt8x*18yeSxF^BE!SXk)VWTlHG3kM^gzXW8?+ND0bQXpogbh50j@3A5IS~oi z7oOUn*U=Uo2F65fkgSwcAvqqfYjMI}H4D72Vwz8WL z6pyto#UhiQ7Pu#Kf$p9j*kVM5c5v|1VzU-&tiUy78C6krb*)%%`Z_;v_~RF}U^!E} zi`xS?;_b<&B)ohE4_3ppJ6LXy;y9V9#sLTnCVqjiM#RE9gnYG{-XF# z=6D61FoHcEJ<7l85cIO7$>KxwwKCW3>(*$rA39}ZmDBUUS(~!@3=TH-MFWu&#r_uq z!v`j*N#M+Q9{!wZ38Q+Ol~oU{b1(F69QZ!Dxd>LD{kG7-L5{!obG3l=<`@V5O@sPz zd0wk_MXSE;)q+~!!B0zuQ-j^%c6LtAestaj%%&ou3? zs<8?l(dI9pEc99CRp)1Hln(bhjk(Wd`xM@CzE*?1)!N({GD=1_I?pYb2H_n9ZJFu! z(Pz&JTPG#5k)9NxEyk2%fkIPPe>v21zQHjHvT9&xsHIA*kI&sA=IvmjVvVzB&YT(E z{JGgmw+ZANU$;)3 zKD{|^QJ}6Z{2#Dw7Ls7h2vGXNj@f21;rcnuw{B5GA%@Ce`RxakS|o_8T(&Tx+&&Hz z;hbC<%OGLT+Tm0Bt9W;1Rsi`2o`+{qQ9b~(L?V-uBeoWM=AiBFT2Z=sVefN-wKF@L z77;l)wx4Ldptg&P3puwjKAd#tAb@M+5)rgrg4&h^1xrgy=UAoMAPXXtfs#nJK=7KY z7)WGw#TMIM4}YzdPH{kN<5ThByX}5$h6^ZaXyBTdEXse5r!Xa82 z%LUKCS-yl7>3jD?L`6?^Cksb_93w&m@c{V6xMv^y5%nMhOn?0v4*xKTCo35g5^}dd zyPA-idLq*~Poo(3rsJ1sMv13SpE|E(y+L{zl}&v&4-turjY_SX>= zw{ho*#=)LKaz0CP=wCr!zZlzrsM!#3P_<{~+oQaP#f1`VOs#vEE|h&4^Tpn_9ENTS zD?tvT+CRh;;PxM)1Bpp`4kWZCDk=`;W^5i7^8a z!456-Eo>Z|lZ}JIpE(gA`TF%!J#v7UZ->l9R*AU>i-Pd3?f%E(YwGkN>w{)A<^I*) zJWc)(ZS=*cb`IlCa*Q))N?kqRv}x%uMd1K$c$&Ol6GuiVe&ab20TIk?_rwv9Mv}!oMC(LH!yepJY_RQA$(nH8rPnW_lL5P9a z(g%LcdsOd9Nd3-MkFddPQ_yIQhua(WoyKA|&aG*2duVE4^&Jd?`l3ux;Q5(`E>Ah* zh#*X&(foylrfAD4q(vhEy?b;?T2>ZmJMU|2het) zb*P001w}T^h7qj(>2xE_;he2PXVMBXE0CpB9wqIDaM?Ul`yh&yu_nxqZfTHY47w8q z04=qEJ0@PsK>q`kAq#e)l#u)B+a5pdL!um(`x!yQQR@}aOJ^1mqS5i#CV`WPww}5@ zxn0;dRAiz6_Z7!=?f$z>Mh@5 zbv%QBQQvYE5;A3(UtHv`995QanbSjwrt|)33z0*am;d2|G%$0g*{i=313?uAm=+9Q z3^#6&FE1~94xpp-2E)fK$V-B)by>ZkiP`;knb|?I32wasXL3EEKb7 zEEGu_XT-C8tN^yDl|G_bZx3dMUh*_R19w~B)@4$|5a$POXR|-9x2d~1V9c9z~JYq z%@nrV#cDobpb{QSXG7FOq$mmsioK~{M*$-`UNk+o_gS#cQu?YF8PDu(&i&V$Yd35_ zXmdbdUp`gF?z+*t)r=TCz=OL3s5s|Grd`(-d1(_&3k>Y+5xY-DS9Kp`DKGV}evK&rc|M(Z*cF-n=wK&G-;SLb5XiUa=NotDx9tp?+JX`h`2+ zuc*2GJpZ=nt2G((cem;tCM2*3xiM2JpQIN$+nTRe2R?M7<}?u}-kLJ%VuYu_RY;Rjq1kTlB57qp#cFb|-f#|hXmLCpK;HTrK>6h{I)cr19H z3MHDsi-MjPsltO<4~R%fTij+W*}+*6ciThIxHIl#o(l6=hKcniF}ITSBOGr+;bW_f zk+skXIw4JaXWk=0b#Woho3o5NZVVt8L2R0^fRf3hF**y_v;o*&guuwvsZH8N(F3&x z6>{Kn{Z1iUYF|8?mzP)D!Z+ind;0ne#KgoH;`;h&Lv{~yhBh`g>mdZy$gTmwgh(UM zHp3SJGypXBSafP!S5gX7g+xh2Ox)nMIsXoOcX>b(%pSk>m1DEVz2Y;vAB)P%%G6v- z5I@@`iO@T;viK&4s<7^sbM1&-s{5e6TdS}&NiG`%b_8<-cB_FaQWSO$?2BMFf-i6r zau~GWcW~o$%Ifp zfZkBEK;Ahx+FyrI7uC?9w8lw$jaUNnw91J+Jw2;qb>J;+j(GM-02>j^CQrWYO(& z#C7T)<%zB(j!n#r;uC-EYrh&Hvy!KFfdC3h~ik%EyqP+E{YP;4>c z3?R$TsEM{980=^j_Bem+Xozd?FFRUUWo2VWM^4{L`#;9GG{hK3!$}HHV6(vMFr>(C zp!cqojQvi@(9Jt^IGz7SQj(Ki@3Yvief zJb7{g$VO=EiPH2Duux)^FjRH*Aqqo8>NIlnmY31K>n1gZe}~!YsDUt?B_ZAYGnZJ?9Ub^aT?s)d;9xao+x{aVvR6F z?;9964<_vYJS;e=XZGft8TmZ2n@csNb8UIre#({Sh5EtI>wTRlPh5^dygZT-)~BT7 zdC6)%>3gWw?BvqW8)xMH_B2e-%;-5_Dx--nT)^-XrB_F-eTqQ?{naTi6J8?qS&5Gn zp$kGOd2y>qRt^S~LO024N^C=E7Yoh_qFNmlOe4_uQK&F5 zRd+l3ncjJw+cK5<<(KoYBI@D8hu{oBTA{9=1>aY@67beINi$p(E+3;u-7vpA&C=P| zvD&kTvF#*4rh>xoA~(Ne;)xFMMx_Z#nk3h4#6_IDJ~`^mXe)~Yi4HV3@qkm zzYKf5E(f-}YVvIlLQ>MN=%s9w`fe^Q5yD&c@e5wx)++V2VJ@0o8vz{gjA8JUg^ zadmz>^`EGQ*8n%Ga$)cC_esPr4qn|3u?+7J0pkA4=aCCau>23F) z;*i}B^$W%|1LKCess;AA+S|8pb;6v$cS>eb`d=+5_T_SoYGNV~UE30CS#Qb-*EU8*Fy+pvU&6f>z@TN>xvfzQSoe9Q098 z;co4JDUy+UC|3rKO^v<7pWQQh)0X~ch#zVNcG%F479 zeP5Bj8fx;YIgSVw9`t!W;2JqNI3NV6D<$QkBHC^DQD;0a9+cJA2)fw!Z1L!ex4;ny z{SRnQ@k2eg-S;@$Jv_v-LiEUCw3^ zIT2sOeY@yr+x4l`huF6#cv{CbMl1@d{lVryFCaj{UbS(m^Ybv7n&Dj^^u|UH`;}q+ zk&@3{nCPaQqEaBbE6EF?Sd86*0NlvLo* z$!koaqN317rYL1y&H*K2rcV*|>tKt(b>|CCn8d)69T=6Epv!FfcF63@o1sm zX_NSPZc>0$DSg*Zq7Sp4mp<|c9h*GNlQ-2Fv8UQ&L zf{vQQaGsbLp;!N*2rzOMtMnSN5TC@mir)g^&o4zi(+dlLu-Wds8JPL{sS;@dkt*`h z_IVEKRz}&HnMtH4DuQ3aVq;;PfjrC@5x~8Uw1W&CSa;U18~jDdW3z(!=j)4(1vyf| z&$v-RBH#u&*pRzcVs%|YNt6}ezk4huQja`3Hg*n>p(NBFfluL)Js{|(QsI^KG7kNL zau^mY&==$|k84*s6T$YwNYK@5*N85_h)*Dll0bw4z`NGZ0jD^SM54ebp=W^Szbar;O*&)Z6 z+9YNG$1vb^>p`7g;6CsMEBHURz~e-O46vkm*CxadUu9-45{%Q3Ij1yaM9{AF_8DZ1 zvd?Q~b`VVSZ?4*MJ23pa%cUPPFGHmeuAZ9>w^tPA+_M~O)C7p$=A0HM5Lav^*8fF9L?&7*l>|9F)*MqI==#rwY>+ z(bgMo6}Scg6a1t#A2qzomdu;PRp$b%Wz_#-mPI=hU%hgBBmc^L3p30NoCyr5hWfwd zgGANA0|U zGyVuR{;A$d>0RcwoJNAFXg(K$WA)rOK3$M`H!~w+qXe@k+8h_w%eo95CVbW{}HW5NsSBNi7jMwT}|- z>}gBL=T?-u?q^;DYHZYgudc2Ra=>k91zT5DgrmQMLuC4cT8foId8?^qeDZI9Sq!yN z&cy2Sve{NM)fzezp5^w%HD1z3Mm)S&pa+A4*wK=$1##_frMw=oBx0}Dj+ki-FlY`Y z@eV^Ac;*HoZ*8ntpl^VYuQWg&;LJ%IVpNs_E5oUsw|{b$6t5&aUy+J0s$?VoHp9fn zonfsu4srGXc?!{*pr6H{Vm~&HozxZs`3{Eiu(7f008xwQ$-E6zR0Sn}(rsM`V6_3r zz+k+L^<{$*9Q#OwB$WU@1~gvuiu4EhhH+ux=5N!l_t=cDTsNm;Z@Q*}dPTvWALfUZ z8PQW>PW%2lWo!koNtPY2ZPsTC;h7OBJW80%?=bpn}0L-l;2Bu4vV`tG_?KG?=h}q{lKY zqM+iltWyv^yo`fV3L{%S*6l)-?Jg`6)9Md8yxHSB+G-7mnG@?`v=rR;gUd=(!FWrk z#3gbGS8h^huMrLp1cj|Xo-Zy^3}+&BO#@&Qy zpFcPB^$|5UH|N&sw6!!qEOI(;=uT8RMHJKCo;y~&FV=;$jfW!o+xMlu(~ysm=xKV( zeET*nsG@MX6ng#ggn%hE3%Hd^iD%N2)I1j<91Z|?(x6G@SXS{q!JdX? zkP7>Nw7o#x%m5P(xhVt=G?e51ekEiwYP8($3e4=ChG&$kT}=rz1Sxoe{|Y|I-@(VZ z^5Lp%tAFht?=>Is5(0G0Z0ML`c%2rxfjwynd@ZPXbzKZYWwB> z*X<>XFxOM2`}e*`LBiKt!iDKOAlq15b=)^GLFj(`ZT_C(>T`2&wjdeB0T7r}>;_?a zey_!q$2>odX5HZ-uG46anhtya9jYRF5#TIvKxQwI`7TH}iYU}sU^I|TN2msbaQ!E) z1(CSUvBTM4w61cq7diik^wWjneCBdhgo)~nHcQDFpucsAIyp)EG`F3XbS=39C%#X} zOEUCMj{*`Fqja?duIbv}=boK~93aOEL#C8D9a0Y`YJ@G+%WOVuQkjol z47{x^upj`>p5PfO>1?%PL>-ELfiDj2vF}*5Hyg6?{X1e21KGlqdR!`2mTB&<+KL!VGEyu`&B<&9 z%1*vX>f%GZ0U|iNr8n7gS?X4LBQEow%llU`%XeG~1_WYj`!1y<&@3f06U)4q5)^;$ zh**hq5kzI7qQV0YH%x=fWxYvi02&muoM0f5@hP}4Y7f5Qg*7@Zedy@0*mf)DA__c3$;S=+$7}>UE$&7qEO)j>2c<1xVvNyE> z)sKZ|AtTr*cumz2ZQY1o*&fpVOBI$lBGXlJxy1&fPlc#P!1W?5SRqrgo*_izc{Xzwp%D~ zfkAUoJC)uT)%rZ*%QJSOzq|kpU*%a$Dw;x{%{|mq4fz&t+p+oT`OQ%q<5z|)smcWf zJAYXTBr4uYZITusnsZqh%#fUf;ki9v>>(?9iVa0gg-kc^shajM`EY z5}r_19g*O^GjA&p91>E`u^Z+GRq+ByPGQigx8p#i`P-A_Gd1#;eeY?=#6BSHOAzk+ zyX&o>m1=hB5G*DQ+eWe?<`;h;cp&w*xv>(t*#%m*LW-f8EhKc!4-UK9ayQI*N9gI==C!&bN=59TnKja#bmR!2EO^{ z?s^1(a8d}0yw3&0p~%o?bWDt+^jB21D=*O2NNxfhcT-ydEF52sr{cX``OKF87*$~P zVEIC3a^TGj$1^!SJ*{A`e7rf^Z0vCD0xn|Rt0E)I$HvF^6-|9+S@mV@r@jFKU}4mw z5y(aab%25kG@^lv)gKclIMhJBc?>OF%AZPsi-!k9H<%D(*mceUn}z7`;6bSa&f(*i zUG&hO^Iz6h4b>Q#EX#hFqqYDygbCT}Sjl>kf_T@tkWjDP#rfgOizbvt5yhH+TM6=F96V2o^1lH^?f z<-LeAD+}a%G=U9og#a)6-RK8j{&`IVOb@(w_6VYItEy?r{|DlaCHxk)3tLxZzWn>6 zTs9a4;dK-ja4{S6VPzoP-S%OLdJEuX!NbIP?Cdvfcdm0OPYd1J|Z%xjV z?Z7pT$9(P?q=K#JJd^CS)%AE~tOU^L0>C10hCK~zFd&1gk@gXt2WkjjJOLD13In6= zUMCe4HXxCT7WTks0LdL3FX*hlluh4>eH+^IcfXQo$Ppd80Dj-evEuhEHZ}l+dZZ>e zL&L|KgM9`AV;W-D8$UP>3w&|gWQuq0JTcOErIGjfuxk8+&%jEF<(Ph~`1M=2s`_GH zh-MUhlhD@Ij+z792wfrXPZt;!KuktI?Z*FRaZ*dsF|C#_++J%uXu{vNoE5d)71Po} zo)^eE<7%T-F5KtnZsYswZOjDF%_8%*ku_-j18=BaDt$bZkS-EMScZeFYYZn{eP)rpXq~cp!o!rnz zwg3$aEbmGGEFD%4;C+$K5y+f8TH&&I*Z(?+A)q4s=Jl@a!whV1!rL@!Rv?sdx_&ox zKl-sq&i{y7+hu_SNM_y1Di`M&Ke7#AZHhkFv98^3H0oj6iD&p*5NB#~V_^H{KZ=erE0|E?}dp)br~9_b+Vvg0kTbEjYrilV{e`?Kz7;C1HaUA zQeddxK9U&jQQ#pXE=o#DHd~+NkauJ_e=T1mBqY4}HYL!ku(%nas1b{K;;UCPAU8rQ zcIoO>DP`yZ^&v6a*x1wo^{+`C05O}$Vrjw*GgDyOzN$_9#A=d*GHmpn(eVHv9UUF? zxA}^VLeO@0xaHCC^UVLtdHDG8<0!9@ez)@LN*E&8bZnu1{;fGcdw@aaDVUEn!#{oc z6d4sY0FO-8KqPn60B(iq*Ly~7(TXb!2B}s;35KD5;6T@hS$aUU)-^wvU>*&D^5B=5 zfsF2r11UpOGt3VW2;qGd5OM+Fq&}wHVeTRLVUEfS5c!F`GNKCSc8J+I8~Lokk%hcL zVr*;-J`&8Y<|Q+amT&ww=i$WsRPp!8lF+-}7n|fvDDbS>?Ml9kf%1-68a5;1W?!gA z27m!oukob=V!-YAwfJyC=e@@DUDq{=09JYmgBdWy6|+op+kKXW<5~v}cR2WEwhO_! z-VB-b!zu2+c;94S{{r{coNI;CUHb1|cAq}F_`sBv;b~E&^xitlUC%+Ot zQsb_8c)G!S3j)W5-8!PhyL$VC`*+K}nV~(HURoI&Ct|1nbY7jCG{e3CASq(_3iX5c z%ye{O&_4&16c-oAN5DtF;@YcbDi>Q@D?D%OQq+E#lM`|Fdoyry_N|m>51Au_O7PBs z+>mIPGmw8J*zDFxn{lkoZ+{s(Pft%@MW(Bc}X)U3*bE;Fvk~Bni*yRx=x{CJFy7QS_yf; z?*SVTY=P@MJQtvxFYrj-E6$VxHw5=NIi~aQ>49(*?-q=tmz0pg*+po=H*=9P2KAG( zj8H)MDkx{cH1m5`qoaQwnnJ2`cAA5EVy@syQtF z!Lb%BQoP#yk0uZq5|Ps;Df#m^c6S3{@QQ~r>|(s5X6W7DZm2q^@Cq1f0t^Gjw|cYi z=f8K?=W%7caihp-j)Rg<-mds7eQKd=1KQ{qyLrhGC)^ z78bYT2jJy3lcox8seR+5!b-WaP#L~u(m$LZX zk}7ivPxLL1a(Zs*3P=QZ*Ga^|mx#%naj>muSON z@7uGgzsndSsY1#w8QGN^;6+S8`HjFJE4<$$+VVmDZ+ZYxPs=l5+Ol40i-v}VYWoy) z-ie1t1({1~hvLa{RijJS!IBxJa65?3bMGX~egKvT3=Dh%8v7MUih&{d5_>wkf^uYy z95CEp+LUE6k`D^kl}y=}-c?n%614ALi#6BdDn|YLg${)uc7i8qMAH@ozyk{_X?VOF(1ys?BF z&%AitRtw(Z1(Ry0VJf?1x!h|(Cv?3eMva$DqyOLHm}#*FGFy5{GW>n~V6!)jZu~M? zpJ+_W-uX49b1Uh-0G66<)+IIC!aczZakZdU8S~7Hq+pgR<+qGx8kv_D`g|zN8Bwy& zL+40j`=T$|oisi{L4M(aIE(l^!=+Nid9Kb*&!pXT0O3%+a3qn}svxi^l;$R>yu3X4 zLBZX?s6oa{>U)Nl^eCV=!jOwH3`W)M${gFA!cy;Fow#Ejp2oXCyQ6`=zhgordS!}y zg9Pq^_V`^ioFG#op48nIi9}v_rCAzx;~%x z`Y3y(-CcI*r0$Y+-3Pby_Yq=Vx+$y43Wu;KIo~0A4dvzMr-54}`!<`_BlAaD5 z-cBHh+_n7I-aH6yjg8hRcg?FV{@4B7A0KWaAs$~t4v6Y~ z<$;HsX&ckbaGLP!x!1$K@m{m?_0L_+G@CZ*>9&FAC*EfWxj5N$E5 zfCkUUSKU2|57_C>_{);!6{1_ohXG;tU-eJ43|(sB?k_GKjB{tFYyW!1$lIx>NAC`l zjSiKHea~IbkmCxv9dIp|(95VPc6D`OSuIBfkP40`9!bfXK3OG2#mitD^80iGe*u_u zhSs_rC8eIRvC@qjLi6KkIc-R*VfyQv=`UVIPpa3&FNmHHmOl>V(o zRhgSIfgEvLQ1_=&!Uk~x!RR8PQKC?!xqF&p@z(C~070{_Wc zi$P<#C*veV$KFO$Ay=!AxIy8xUlVkKZ_mG9-J2>mzzN1dj%)BAHICCKKiQwr^mL%r=!zfJGEhMgXd~m@wmy6erv;qGw!BSf?xY>nlnBy8qij4-5Vuzi(o`} z**!h`Lh-Yger3~ytPA~5W{ZvXzrB;SmB8_sNheg?Eg>n{fnrC`z@UFZc7DEr>%Q{m zwY=N&?6qs-&IhMF>RY$$44V{b()0zs79KLkCHgPvaTh{H7TDd9yThqb@$tBiJ?cK8 zD*U-vWd#ut#5xz^!mWV%z2I78M1&4W4tTyA2-ykFbWcZ{-mtagi>|;IUF3`}qpi@O zm_<)f5)&CAO$0=~u_U3ht4rrc>jyo3{dEUbtSf4PuAx*U=?dfHFC_aI-GxHr&81$% zqcyIqsTqwA&!M1<0~QQ04ur`LexRjGqR%{l4f-z2c3LOiJ6H*Z2A_#`@BRDz(D0Ko z61LWLZY%IzSk4~5`B?Pc+7RT_Pyppa+5VSkn(kAZolc-HnmZQkEIzI|W=&bW(38J& zQ)k!2@om&c+0L|0i)R(&6hCY(aH#XMnsT}odnb+kih9GIsdpU!MBesX25T z6gd%v4=ZV$mc=-H$`6W1fl7k1$ocz`2@ZA;A*37^XQd8R zHmCm##6|=g`KYir%7}b&*KraYNXV(#4^c8=p{PHs2$%fS2J-a~6w64k@J5yBwoi(N z<#q9hS$ZgX|+G@OHYLpZ!SHDM}gGkN^~4ZLK%km^yqlh0B~2=yCojCHN^EjHT$j z3QW|qd-p71cPdjzaq~!@2@~nCUPVMWTz)6YDs5%{c@3Rz$W%Nd<&fjlw4oMV z?$xs<**Y+4vk<2jod1{Z+5-58^C7Y@cRx$?j7<5Xtw#ydK$LIrD>}i60k!Z05(-7c zqrmsjLs2m?rxM{e3_M^?p43vUSn*WGSHss)g)t)@!3qSRu$!Oa`&_&*(fG91+=pFQ z$lPs%zJLnaX>%6_a;trM$vL`2}1&3!*8ByPOS;w{mf+hg_;4R6%4Zy4+ zL6-FupWsAOMvF$z`@eL8RT~w1zH@wh+|+qS-6c^)Tif_9C$d2<0|@{y8}j$pAPWS3 z9@t0NAS_#vCj$KHsmSGJL;?VAh-L?pY2q{zm!XVA1_4QoAQ3SjCS9e;TjY*coGb=@ z9j8jpPCap_zPAk4j@(BXa#k|w&fH%s+Q;r{WiEjf5vH!PAa@AdGU7FWvQQ3f4z1A} zvC!LE_R^s9BCZg&57O8}bBz&!@mY;n!G<*=&PLd3X65t-V0*A{(L0kji z2Vr}Oy^wZ71rDU62{nXCfMv0(2F4r)^k&J)$*vNAUt?1*;-?QFGTM9jZPco!%+a`Rc8whzI}`U_-@fmpXW`FR;k7#!)=3(-Bu{eu{T%>P0emD;6fiK< zmTG+MKdwOurqwR0lut;zL4EVO0CtO&z{e2sDEr%vCeFGiQZlFqcx=(bO$P*?*n?Uw zCJPv7!q%wZH|6F4JN8a}_hr4dG4R+nB6(0ge3;Sb*4iD5yEmnR1ukoNwz*g4>1+}Z zSPj}Z^PkgB6^D}eo7rm?nq7v5O`C>jsGtg9X>WcQm(*3@IjfVi zwXpDzJe8AYyk+z4m9W@d_y3}qqQ6*^)qm$X6D9QeD2-WUOmZ?aD1-N)n`}7O(gmRc z1AG`tEVa@HLR8*i!&KBi9zvN6Fa7FVFvHe@4z)r{6@i9m_N(JZRT9bpC(n0j_auVzS03WNcmInZj2M?gR z$-~ZpDu{o_j`plVL|)(6B&y_d{&ZBledp)6o$t&>L#HTBU%j@jWDN_Sv-6g8KgAY3 zg5x}qho3Vsan-pRY@#F^DLK`m>5gIvMcEV0UM+GeURd`L?Sc+8Osq4WuIJRXJF0xx zQqBt^a`yi9iU^Vl%Em$h%&Oxq+)fZ=rY*Sp@JX0*+;*L>XX`ZVuN-DP*h8@zUn9SlS5ym*Pnj21?W?c@1*fF2fP;fJ3!<0#{G*W-AyH8uXAN2r(`&V0o*=t zpM#^EGH^uzNd(Ny%)!yoZWHesPnw$UM!j+d8r1d_WN?wA6uNJcBc*WQfX|aB+oml( zIuDsap&QUR5)PEM|t7S#K7qc^sUW?(_Rn^FF!f=zg+S z4ek#a@tG|dg30FvfuQ=&sKr!4&DEY&Miw2Oq15@~Z5P!0!cR}0yvw`Zxvg^X2l}@^ z;B1gKQizu9Nt}GIAeJ&`e8qKr!=~uDn4EvA;N*D3R%QOkrR(a~E%HL2`+h`cJvGsY zXU`1Dgw}^-O{;^v24O!uaf1$KUTpXODnY%}PES^kogVkru%46^ke%h`rO$F#oXJc4 z^}}YequTFoFPM2R^;2hk3VK;5yvi@$ziOKl^nYCx8Exe|3gu)Q5YA*9R}B=*UkFzGAM; zbEHcVl_RH&9rJ}(3#N{^VCy-=zzpo z^>mYBNE?CPo@`k0@h3% zqK)yVFoBd+1x|5U)gbr@vcvNj`{)oCzoyQ{K z&NV{(ftjY3S(-QC^f-7dXJfL3|C!Z{nWue|j^2ek-$X zNOtwT2_36eR5dxMg-G_c2Y z72p^+gE#Nn_kuNg;Uva!^!4}O9zLyus5Xe*_U62GPkiWKvCP~esmgA#g}4K$xpHaN z^6;Z2xF_#Sa0x{3{^u1C60InA!)f`KmRh7*%l6@9=aV=Rm>I&puj&xtF#eih~5N?NsH zlb6vzQx4P-WE*o>E}81}9WrY-)B|{Nx!@}=fombk-!Eosn10Lv5{Mu|_n(HlAXCE}QhxgQCiB(%iwxU?BSkr)Zy#8c zYUm5>(bJVd>Kpgn$;%frEY?^KHGYs=m^w-9RCsGKN&_%)9=wm|`iUYHLJq5wY8OfH z9_ChT!h!*rs@W{e&wmf89oP%WPz`x3VTKBEJx41_eTvX{sFF>Bxw{_$gRu_Lmus>02jUWg+Dau`$S4J9<7$m$9)J2v??!6&xuCVca~#j?2p{2HvZ-@T{3v0F{$O2| z0ihLA)$8wh)lEi9j;vE{4lYy}E;OvvSl=2!j^&CPIf zg=$HrLUm2_jtCY)P3{r3UheK*T(BGd=k|t>umWuV+l^~uxR7gd^8hyYlnAr@(o=;? zbc|iZw3Z+Bi>E!6lW?GNxc|q{hpk-;@!!sl?KJ)o=N@BG%k}5uYY0k!EJLD#LjD60 zW#MH9hUoI-2`d6)35lGgZwS*jdJWRYqQ_)pX5O-c07HmpgXRN>`-hagh;5sz6JkF! zg!oyF`q==Ip?vxD!KWPpzW;hC4^DJz=q^c2JHReHAH0**TJkDWP$CcNpPK&L3++bu zEkm{%%WX3tN)!r{h~z+#Mvcd%#C>}OsjJa|o$LRmpJFwbQbSbS=;42A z?U^}(a!AW|>@4BqP=tzn3Q7EMZ%s_f)7`z!1^r+Eu8+2u`Ezm#YUvb~yE8i}Fzy3F zpla|S%yVgeGd-7}mO?;3_~QIsHT{CJMA-%o7Pv4mQ)k*urNY)EkKn!p4)~)Lm6Q(f z`T!~ebb>00g&DuA4WErugIXG(O~4O^DpAhP8KVP&OmRB&!Wo;0+0(Ah2xb@=t%y9BcWfaY9w43ZK zqAt0U&AGL}D2l&k0%6(WTK`wG+tuWI_+NMTc^GGOgsbi9_Yqv&`|hkKQU!zF<1%K+ zaJ)bIyD1?h%D$)`PsBQ}z!Jl}9g~2bVM*4AeKt*ZcH{$V-Sa#uX*x}zC2{=YQm(tT zr;L4nRan|^C3wvu8;b#VUI}M{bI{uQKhK=Eh)kPK9GmXTZp6$v5tE(a%Mc8 zK;6aUuvq)h`aHfo^q50s`;f(^UmGQ3_bvP8D-<-;EcJ!!k7HijefnqrBlyB$_~?BA zG?SNBxr|(gJFWv_KxY69=jH~mh3F!0JhXD_8MKYmp^~hI#3oO%flZ!fYj4ne*5bOH z5CKATjneXt+!|KeL=L%i5Qeo2k%-1>v@fb$-Nb zLoyKIWruTmYknZ!x zj7FbY)kQYL`a?nglE{sHu)&OL2`RzmciVq0{eUJiKW0%$livnzXRHc zsMy$iKpG^43kJNw!9fD|BcNSi-vq$d+}LwTD>ewLb{~92Fafwzfz!1+JGd z1++4|S=Gf?X*l?GDA(J{ZDo(9802Q}5zQI)OV;yB;NGA`a~|Dt{B7dbsk!T4w2E?X zpZzL+en`DMNC;pf4l0Y=Cy@?>_6mFm_5p`>c`(XJ-bG~F094G7$W>h~p>>HvI2EzM zOeC2VqDKjjm^4qF`TF1}TfNAYS@X)~T|7#49!7!sH)A5W z)DwDc3gtMB@`^u1qI^YrxocUhmbLF`O+e5V74^P}Ke~4MO32(ofByjI^Q`+eYL__00_D6v1$QHTy1fvp1nGCow)q z5P^0bw}7CwXv?Ub)2|7v=8|RxUsV7MKjWgQPZ(!<1W9E8vx`a~ancZY0}AVb#&lmc zBOQ*UHIIcv+39}sx74trbJ@E=F#^Pz_~}XQROrP;2eBH`1u(;IU0jT$&uNz?a3?Nfb8&1B2;}oQ3)qDc>0NkDx6? z`?(TRaNM`-;bJb_?RAS#uRBU~Q22-q?3-Co}EdvC7lrBzU)rmHW;Qd9+@EVC&|2^>pPU zHyfWgNQoa>o1AFU`hF=`EnWcdP&Z>cbcjNh*`gn7V88=eoOq;ZpYA|d@I0ew%^3Ba z`9#*!FVejrCQ1C+q(A%1X!(=uvrfsr$MvElFXibA?s{c;j!#xeNOe4dPd8+@PQ8pn zrB&SlwifZl9)eA(4@oWgxKBhM0*^hu6grV}hC_xT>s3@$mm!=7gEpb47`2(uu4rtK zBNhyrHEU9)>kuox6Ya(JBbo{Yr_===?)kr^7Go06it_U>!4~*@s}QD>wNLrE)~V19 zmRg)qPu2ZA*{^q9G$f??o}c}~fx0Vb{fhh`%y+!&LUN5Y8W;(@=c*&juQiBA~9 zNN5n1k1&_dv##H9;F6?cWW^Ggj6~32w_hI-<72X54nQGBX^K;H;%zwzl!Ip!i-Du7 z210xi%QoAwaiR4uQ|*0bt5}r8Sbqz0;2FS(93(DbzsHCitdoC-f!)KiYREvcBE8uYdKPx7schIg*!aYSw)1 zPnWu(8f6mVKKMRXIM%x67SreL9SIGy7lb@vN2VqgBlL(}H3&NYfs}%FH0s__9a|5g zga~=az$W$iuU&1#Nr>b(K`ptvvwM~;TlNE)#H5`fL80p-uIbtjcI93C-i*j+qN<+! z(ME_i?8SUNjm2s;gg(T7*>RBSUBCVT`!4ZkAyjc#&&UX7;Z5zXh0CH%c~wdM22B!# z+HpgAHeDqf2&Sg4jf32wX5?Tk23v8OnG`fILeO=3?UJrvO!?Ph(TTPZwhNR(W^ zeJx~sO^~a%Zbwx7yu5F^ZZGIyVC#%)*AipFX#A&B9e=<*)cAdID2++Xvo6FF2Yc78 z11DD?iEZBc8)P~F%q)08fZpQQR<9C>zICb;q3S5WxZk8 zr;nlr6D1U)VD1x!>X#>1W6!PcG|hKsjP5{^F^Q#aBg59NA$>KXP-b4ly)g;MUXR4>d$L{W`vZ@vb}_sifQ94cn#c5z(*5{)fFUG4-plg1LiBcgQN@2Q za4oxzo}m&$)1lf}TI|sVW3@Tz3ZHMzUySJ?d+}>`8O;gf=Gu|Hh5(VG%x@w{yAX;4 zFT6zU&`TXSbLO$;-_n?0;z}&okCD2G=qwK4ex%p@9TNK2wQGUiPX<1o?r9zas%eq(|OB|Kb@LJEGe${($g27PB26UtZYR*IRHDyDPsiK)pgd&+H`9nxe5=k zS>JUnxM)T5n^$n))HGmL1h&727zYhZiO~5F9RT)Q`|39q2PzZVh5r<#+_d)Y{*uD0 z?^k{7lzpczgXIklQIv-FOJBDxUU`(zCY}|VkSoJCFNiWlUVbSg3i|3KOoV`cbI@^k ztU&FyzIGQYxPCzoC&=4IZ7@GUDto$b=V*$z_m_K+k2>N-xxYl56_c_O5{jV9BIX?T zFNh8zoFLV24#r^#2S;9`%um83|4V~npPHJww2Dz8W*H9mvS^`AycU`u!?$CAV$+r0 z$BX)n*EkKCX|LB7YxFE8W^>9|ctCd+;i{&7_cnL+i^&zmzE9eZo?8vIf!kN{wIjSY z<1Il4x;OGMMozBIz+B3^ zr6&M|K2BTZ=R&F-ijafaD{NW?*(-_Cg6Ur!5k6t*=_FvH$2Sq^X~p1OIe&~7Tq)h0Eco(;+76t{KN^zBuw-PlnCaw3P%m-1RB9Lm=@JO#G zd3-dw_F`;^e1iGE1*2E9mKn%J*^hT+Rcu^M&GcwKEbsBPc-_9Fno|}jn4G8Jv_caz zUiZM&d6Vb@s-OdEAZ? zjOD3R2q##gV;k(a-kv^=$G>As&vdIJ1DU(h{(B=PuijxOVxxrGU>65-@4&%+XR?9z zyMH%R7_?7#*NQ||SI29*|0B)|R5vlg2y(XLi>Rlo2rJ}0%iyl1gCv(~144(JZ+COu z!O$tqeU`{H)p&DhY2<{y*seX+Jrd2fVe5pcG>Zlva=2=R0aJ)SYNGdzDLx*h9+{$r zm>%9Ef20+tl2)LA=tF!;RaIs6{oyk*i9-`7Z+5C(_n#sr1Sv?NLnvt?TLa6yj|;#oJO6swyW8*^^*NOskoxa|1C zoC*o1|Ij^@hM3vnxPHE#q_a^`Q9)?huBdeF{Q2`D2+U8asB3IojU&YG$ku5qpL+Ue z5Y;ODTjZgbr%ZO_wWyg~6`;9ZVj;K1qi*%Kbs;u0rZDfH09TX zJpks^p0s#Gco2;HuU*gg*#@YSx+-&SyrIh=`V4Kj>h-bg0#;$whE4yrY}xEguK)8P zVv;`@Z%%5)N>6WM58%M3yc$o)CYCHBFbT}-LG@3dDi|UwjFGb`Fv6R{rK*{=Q@qt1J%|`MP z7i@%7;%+9h`uC5NfGgSA4Hj(f3YBfUt22Sb24d8?%Vv#gZtASRX-@luQ z>b!dek`EPeS3hC|JJ6CyBpkj@zDsl8AL4wmdLBcfy$(FXnf*L*5qK*mN4_$9X<2^Do7Y^ zy{n4~m44T=k_aK7DSt+Ze zcb|$Y$tV2p+hxw>S&n7%8;NqYV(Yl*5^&lp6TR#7ntK|adZL6#tUFr+(8UK;6*@?GADX3* zz({OIAS?fP7`klbe!O3fqVYcPO;}`xsUmXzx^jhJd612Tx~X5Q%|H5a&HxXc4A}!A zVuEa=%#lJ4k!Q!ql}E8a&Q9_rfK8IDU$mC+59lJ40cIzqix)YE$8i1bz{TYO2M+)Riem*$CpWh+3h|K>_DtIHRTxj3fI z&Q2ntgfZpH*aBql9_RsaGfgGzLsjzkg9^uHPOxO8P{qvYLOn{xu>N)B&qZwjkms8Oimv znQmTB!L}YUF%fC+=(z5)PDJMmhi!S)OLiZmBfvRVKdbmUICu%WXW^YVwV2Z4oUpJk zurRk1Oqprb!N?LfIr#w~-757{(gzL1*dc_|805pw3)~Vkdwh}~ zdFJJCJ9BuKR=~dz(VsQZd_Y%MHwRe{UMD~TY#V(`DRUH0{Q5ss8b6y8-j#9a)ZqF= zum2ua+;Z*s_yL0lG*}~)3pxda7(fH( znBEg&AYk#?}2vF6b6;G;%g zM7@KZE>N;`EUGk<}+t*%G%rPbA7P_C0HF&ds0g!;=!D2C=g9qC#h0uFMmel-6CzI>?{| zV*l$6z2TqFwv>#;%6n2RRZ!41(AUoeyOMWa9jZpqB}F!G+aHJ_U^&!e1)CMPFz}fUMh4rv2VJ2Eel4WBC>Eo)W>2~)#Ye%}v(qcn zySN^san>kHTheHM9x{5N3E8D3gOF(8DhypTl+G%jH3r9b^mhqBy@y}tTZ&#eFGPTE zz9D#nSUsTM`0?V+bTOH8iGTdw*@>O_Q=clutDAD+!iC%36?1s%2cYz{9lsc^iuL}i z*2+BXq6%c7e0(cmymjD}k!k4L|MGbA+Kl+@N@r}@a8#D}U3(3YDJyIJ00$xp!L|T> zhBHKh;XAej5(bat0}wag=Ggch4#Ln6hMnYsXlOi@Dq>@1eyZLHNE*JFhJoei)6&v~ zKVkc1Z>udMQ#m#@Cgsy~8_rYg&S6ho>HjAtt^=B#@9qFp{T^aO4al7aXUV zmFHcPQ&Qx2_2`u6^O2P}UdXTzd=otL8#m%_vn&e?s6=^(!O7e7%wt8w1m2>D7zVFtfEo!~5QG0n(waFjRMYb+U9lVc1=R?Wm= zQ2uAtl^Qv(EM9eW`jpBoj;3|DaZf<(iJ~1==D0lJe8>7)9;oo#p zPOQW(h>9bt`Rik{zT&+ky7-BFt7Bt!``HFFIiF|O78woH`$sLKLJ(dzDn)dyV{T}2-WeCBgztF=F;?zd5*bMDm_fQtUd#^a$=*4MfuHOzkvg{1UC`03M32so&kW7~G(IoOewyIjReA+_kWa#2aa zABSo2tWqb?s`2r;RCMQyv#)vkmcm^OnI!U9YGP~;{o65;8zMKdZsw1=1lbl|YlzJV z=YBA_Opu@wmK}rfiEf(ySfU`Pubst7=yD{yT~o=}47D4>{QP`AD|AM`-6bN;)J7MX zpn8L$1_XID6~tf7&CSZnJroX$qLD{H>PP2KYib&qFE|-Bq<%nFifLC#$c(Vc9{3Ds zfQJxCE16zWZ+YktHLe6{mr}+Z(oM3v^Uj}W!ZC_$fOB%o4w6O0_FJJxKj-FO`-iHB z*y_2g&9L59OjXL@u#`(JTYa^H=##1$Lrv~zxN69|ceU|G@fmY$)C}CmCbWZpZ9x4^{sgR# zD9gpVzoTnJnJmA}w++pbZN1EWK|s*(CacZVARV5>RH&W*AGcrHMy>G=851hTnos-b zOMl%r%viWuBY(=Sx7T%}sylP^$TyIop+lG-kAgt}^9W$mV`hOwi0BVcqzc|;y5xD(vRgP?@O zpbDsEmP&D-OsK)XuA!Ow90n&K#??h9A0es~2I$4kM^U>2yCM((`afDbD_u43jT$J?$>Iv0BI}HzeQUKfGsw?j5+O{lkHK}zp`FCucaYv9RSiA4H(hCxl zaG(Mrh6QIh<|E3@ZD}(sk^Ern0E!Iqi0XnX=SeEDw?@r z!Zu2-M49zT5X>HCsl*N4+o1+do(SP%g;agHagR7Z5xYDQd*hVF*Iy2Ho(v;_XezTM zP<9FfNFg@(OS}xF3rwq-X?gSk0Rbu+8Z@|GOoDwnyc-91($!K2>hV8$un32{(9y@Vzoy z_-ar*<{<#8eQK0m+RLB$+h4Jcpa($=p{KYo5TA*Djs!4>h&=pgb&B!`jS!e zR(@BS)9mb>SCNrK$e7(;$c`l>;mtv6c$}$jvn)BLnOG(z0W#dix6puWG&o8N{UM-I z2y}jvlfDJ-1@>yhnZne=M%H2X+{;)QY9sbLEKNUfWc%LAWEbb zPgy91bd|XK?7mzqGQfa8))C4}WFLWs^^YnF`16{`{ITKxA0m?r%v;u(|8udq@Z*Uh zc9+{X8_ZlxLN=L-u^FROel2eS=77QiJ=BG&fEO>C2S*+OY<&mG>abBIwD{hU1DTt& zlrr(?-F7+hPmIg=?%DTt)ET5gI*u6x(1s=ppfG zaii+$s@|%V3LWW=(6F%EIhOG}=!48xdA}$$+=9G=>MAA&305=|vs4sC&j7 zuUx2gjLnxE4*2u-D@zih7NG}MD>}=Hiw~g2EO;-67aI98_y1I)HDA?<`vKjLMpbE7 z4cIBcC<%nLK>$P%5Y$FUf&=EBEo5(RMAzd1k%0Riw8^NiNFvijYApw(F|h$QTt=4Q z>N4$GY`1RTz6vMd(>*ss6}?Kod>MYEE`xv>2i(B0j{E_)(1pPSkXhfe){L`4C4|Bxu;`>02JVmvP?245AYy9qlhh0l zxj=PG^uLqcato{C)aaZqt00$$jF5&Kii88=-yjlrgi?~)8Z$DmTOt%i0Ksn_Y0cJT zs&BG#QzQ<`Ds5;#jc)L6^ZgV%w56rK{sHW32S^Wp39AzBYdYNi4;z`-FlZ#0r=jTR z3)zOb@39mLyWH%LrjB45_{xM zzXzg8D#(p|JJeE*Tj+6b_X2h#W&t>$eI7r)4^)pdnVLGW<$9Pw8dA}_qMX$m5?s)w zs~}ZE=G_tRg$UDyjF&(TNx6|(^eWOSJtJeYfIvxmxffne<#1K>$zdreRr>o9$M`?~ zF8x1dq|Pg#-R*f=de z0xxk&Rn-BCeKI*xZtfQo$*FYNcy~P%^YE=sf?NAheZlyddnF*JQm0-lg#tR^%&+0= zEoYm6wAftyIq0hR0C#>P;tq7VT{QwP##Hs)$nggbgw0ckgW96mPTsZHzqq(q6v}{@ zvb#n3u^Am(k+Me5C4C>S^Hc2^P<|%Z6Pg=dpN~tG5*>wj0sSY2sX1W|*nWU%u+3l_ zaq#lr%g z5n|OeABdfkpILK)M#^TqIY9#e4a@fj{K)Qrh*h4~N8>xoZvY7KGTi-#7~U@N`p@Py`ESobh3*| zge;h3aEVV7WZ1Ujd#?8^Tw1f0Sy_w~Wh>5hpN9`GncouhJ8}~<6V+NyVzYRB>xH`c>CTUF+C>n7}CGtB_a-SsE*BU z=X9LnHi+>Ya61vXo8uOeJ8%LZNGL5z)UYHCT>uXNh}YwA^rESMKCx$vSs02X=+{Q? zy%?OhW{^^zZ9CK2+q+%)w3FaPucdJ36EzrCG~x5nrWWCNWN>CIdO(cP!nWloz?5Mt z`_2l-hr;kd08;?+^S7>4#hieNPj@iv0J9XX`PaxzeP=SPPyW;{4wARBx*9jRHk9A* z@#9(nRX`M-ivB7*-4_s|@8MLN)_O@h%Pp{v+F0LRMOj6e0iY5Coi>^jn#6OI?d%Jod$V&U%t zDAs??cyL1k+CU38bsRa+MGCN?YW+hj(Ntg9Jiciz<79Gs45Mu4APC@<(Q7CowW1+X=>M&YZ2D{kR zyIF``IN-e6{==o7vp#*Z(w_d4o=zymNap(Mqt9QyWN=a_AN)>{`Oo@YPVztN_X=)K zPQy{DgXtHWI}+S+1YujHMR(|ev6DK`UT^Q{fzcoIPrL7@T!n3KMn2}sChCad&cl9P`+ni|cv7(FeNb^=TchO34Q3!csz2XYQg`|Yc2yiVHy@wogh{Q%P`ikV9 z`SP7)^-Bb5IPTQPtHc)Ah?AhcHcH6Lyb~fLBp?x`C0JENv5OhDWOLy$T7CCXQaN*G z1@a}J*k6lpF1ESg zA59FmFhGw0J>@hpoj zWGXA|@WYn>{>zsyyb{>-v3#&Aq5LM5hQ7!E@Eq*PRy`pu4<9}H);Xs%;r`=qEdW}g zkAJbwmqlnM0nt)yb0a(z;Q?UuF_Re0MC+%$g zF1x19t+qAkG#%8ziaf_t%OJeMab_)x-!vlE% z(iO9E3$f~!TT31*?-XraUl;QJGds(24VUvVIp&qGdpr&_Fs4<6S9q0_(Z^LJLfKy% z-7}7GA)$V5Z+K;cdBc2-Zt2br$+TWZGU=03dGz3RCs%|rFQ zc6Z{7t$4og`*Qom-if)!iHRp25MK$&S%Luu_}?}^Hv`<3oNMOhV^7TvVRpqi@s*&s zhz9-TFP#7P^4dt- z$aHeA`~v6UN5A?3TC`f`%y3Bnek1&}M4&@_I=84z7B$HF%LTX7& znYy{TxTf}vl=Cp6;+fnfcLQFPJlv5}+S=YoTjYLeJHBDAkD8 z9t&7!FQVnk=w9G}!{!pS-f-hYI?5jk^C=s;uBW$Nlv^!^1;QJT-Vr!3$=qbjyum%) z(47)le{y_$oOp1F0+@_@!FIEU^8nufgv*J=>_@3sw@pj-_xH=MUD1(AWMkM4mfy(S z`vC|pR2A!YpM}m5p^V)V-M3?{ZZUiiT>>6=uvz@|rAMhfznRql0xok{ut7B1q@O54* ztuPnR5{7~2>(Nzpl>~lq$@#?w@(MCQ&AyQBK!`(BqxU`%x{;`1GEggOW^R7j#AGc& zA8aOs1}tRup-`!3G~L5V&yEX`6ZEz0VaAUe7 z>W*)bPDCq;Y&)E2xHJNVdDAG3PfP$%3VHon|Gp*;H3DQD+jjcBr$3*GmVZ#lFL8_E z=D~?>Yk?m&f$tq#bTj0%V7r%BRCH1=wBO$EU`IdoUg14Gt#Qp-%%X{q)UwFnTE2Yw zn})$KA!~%Z{t^!?b;gB*iVO=5zBeR1V6xii-hG8lO{}glO$>5cOi4Q*GKb7%-AH%G z*p&S|CcTL#$Rw$7)!s4BT`(iB6k{)?aS6d|2@(NiEJ|1IBwIKfC%qRY845*zCBN4M z_W+GCv9Uatv*X55R)ihzCT_d`_+zv>sK%auZP7P2zGg0gX4x6%mTQ4d^;DzFu0zF?A5S#HuDHFqvfR{j^M%w0c^_Vwx5sM^#R}fJwCO#Y%l=$n zi*s>mnG5qXWNkvr>j_5*WxnF}+nzCNe?{+gWg$fM2x#a>nauG1E$cv&Que1%wd+sh zdDr9*&~8!GvrD)z^vKW82`u9wncrzK0~ObtUUv)c+^HMe{Ss5rAZ!t9tM~|bu4;xp_-t+E0nI{E%diD;ob)@=>6fAqR{n9KIR#b4jeDT3Y<= z`uI=TMcmvPq%_g{&<$7)l7d|Qly)@FlSOv3O4$2cc5l{Aj-@lMD;RtB?yY_LGCIS$ z9T(5>4b^v+)#t8c<$j|mtTHeSZ2MB8hRB{hG$`cA(TZ^sIIT1?twiTcQQk)vhx$Ky zq@bO2KJF>3$i#IF-FXK@_`wNl=;=cddTEhiTe)~tl*I2>B}YXkJx1P;eVl&f>7cBH zH|OJ`5)w!tzWcJwLt*le5v^FZ6u3yCkfSyC%R;8=_^x^@C_GQ-Wjb&f*L2Ewx0rw{ zB`^sj+BF_E#h*X#S?&rHKM&GxJjD~nPcgx2<#VJn!sQng7gvDdO!Mt}Y)vGR(WPTp zUd;G;Pa3oiw2ujf4)}!b<46F%MBo~7)X1{{*a}fuFIK03M>D#*o_geEcaqASk@yfp zV^PcJ1&;3i1bg>HgV*3k-L;owpGVnD7L}m{N4$0py^r$!gzRZr9F@fEGG}w=(uWKS zszZom~#8+UH^cs;>nW?Dj0jaow(?g(DN!=k3rO70Cz zS8}aDY_MooAAm^38CMHN!(;E$eU&F{W^_J#~qL@bb_M`ZtS+Oj^ zKg&ut(;~mGJ9fdEYZsrLSeiV;HL{^$Ir|tcN?Qut*yg$pxL`ZvaemL%UMZ(r~tGF~S z6@OeW*q?jB;->Akc*9HaB}}P?Eb*~SmVe4DEgluNto?6el9HGVs$)NF_TIY;x0+-W z;|Opmy_$DaIO{%%)_@%gr&A$Xt=?4xn~T-VAn_koFp+EO`;d`X(2ne#?g=BIRGKlR zD_JuQ)Oofm%-A&Dx;9#(c1`=-xn9Ook|)14H`6=tsHmxRweLlUg@OQU2c}wDWHep2 zvf86-bNJdy2OgRPDF$0xTOoTo9DU8rTGQsXwz9+)@81&gTrPeB2htVUloOEJB9FzO zu2?U!`UQ6ac8_Dz@{dEmV&S*TquU^g6 zLNqL7oYfN%^-9uop3SL-2=C8@g3|H%{U@T~6#L;9w`ZR*PAsPN~* zs=O!26+~tA_@gq|BXYuJ)Ya55mYTlktN#$1bSZOIX=!PVhNE4botP!@Af-$zp~fbB zpn$1^#Y01Y73{!e#B2&}K()%a7!r~jmK$6)5hy6D1qqaZfX8WVV2`)TY*NR4P?zn~ zUWxJzeAUIzH)=If4L4ldKwo3UxS}m(d~EkM_?@51bD5=XR>Mdt_!3Ko_!vbm9ulNRO8f$&vakXFn%?gwy?94!*n~PzeH9m z#Z*y}@0uMFU?rJXDFcepXRNEFo`1BW;;7D$n;KUCKXiQuJl6gGcV#w= z78>X-qe&XFR~kwvLUtq~tL&MThA0h@5kh4rdnbe<$=+R+z4w0J-#X{~pYx3S)j9X8 za~jw6`+djf^IjiAZs*el92I982cD!9Iv-FPSQ8^YrM_w{vYe#U)L3y?j}&@{Zb=JU zvp@NNI}Ln1#rr>M=d@nZoGJ8R9hv@7*izCm`Lg-fu+4pjw|QK3E`?j(3bxP69(sr? zJ>mopVoc0VVd4^Y7#^v_hovtsjvY>Kr$l1vAz)hQPmO}M6M2H|0Gq^I&n{p}cb5)b z^{7~*H#dM0I)t055dwis~gDy3l|T%{k6%AQxa6S5 zl0jf)YHDr&^z$?RMk3{Q=91-`NRB?lEWTz1yK%2rVFf+p>K&bWq-AYu`|Xmfy!3iL zl5hZrzr)Apg9u*LPhsO#471Ln16l#ZTVe~p;=$njlg7rzQbsfmCQKtg?(^$+l~glFB^aL7T%3rwYHu9H#V+a zJ&Q#0!MnWcEm$oYJg<@kCrC0sA;d1N9_$ry($!0CQc^xV_AwElHC&al?8^XX{V`?3 zw_G4%J7Yyk#03+V%N@qCMY!eg9BDl-e>B2ybg0CUK1m%FBa0>!1gA@%RMT}qbf6Eu z>h6%+fO`^E_e@=q>*gbKWFj^uXdb|;AzjA}i#OTMx`Au(K;AtoLAgVwEdqG;4PqFw z_7r&WMWRN@Qs{QbZybYYf$M!kY8qiVkyschUQa2tWztRWW(~%K{r&_nV=MnTxN_X2lB61_Q=tidCpK~C0~xJ?xG#^oO!J;DUl#4 z*_S4jVH!z&Pup4V@(T7c>j5d^4tw9Cf&TZ^=a5D!(!|zqmCa+yz%aT#OgWF&CFSU5Sh@ zSC5}P3zriOM2VqRG67tGZ4cV?so*dx(odOjX+L;5MV)l^WGIYg`t=CKn$U26P#*>2 zoTy3S&DfMtdOBpu0sFsYcU!Ul|X_nfA8w6TKcNhTzeP5*%+UhSi6fAA#&zsl~ zHR#UuRp{A#3D1=`ptCluk!JSl=zef)x)H4qNyG$_XbI{8p#s}+Ms&q9b-y*5w$VJP zSle9Vaf~nDZ+ULQf0xHjt%g-?iFXTIjyeng1_?Ui?j2TI`FiQs*4BBy9G;AfU)$Ki zo0vB-wV;c~U*j@$kTl-mvgXamB&rDF8MMI6FX&I^(0*bCl9M&rpp3D!dSFn*$wL27 zkQDPr`WFBNh+wIC2{Qu_Lf;8!4Mi>@%(py#{6qfY#m%t9Vk-86ZO7c)9L5W5QH%jU zh>jEW{nbeSDz|fF+f%DX8&+dcLtG$MRO#*~P*EhkI2*aR7-emoqjyHJ6c)|UR z4*~&&sk%I17qum`>s-S{!x{~45{4X2+>V_)R{=T}!*>?$FV5;~%By?!s3Ucj$zqlf zHx_W?Oc(%Oy{qgPai{U2V$5MraBJ~gnyQ)aqE*%-87EjvBXh@PR}bJ9ObE{|3I2XLUrGOIKwX~0b!I8!ek)eZufNHD7(P6 z$wV-tNZm>c)2{aM}UuM4{%H^0cqpMd5M@5R+hJAbYI_qrs zT32_Xnm3UpAnLrj`W?)40k2Ptk;*ah(m*rd(j)NPb}@Tq5z=` zYQ^ds7+gEwD78~*dPTcQ<)`7M1)pQibUAH)YB~-j(cbSxm6jAqbWREx`+9=}5^iX;x+YJX;-H2#@ZtEGVHqN$tvTbq3~ za;o17Zc^TFza6{G@KjO4ueoE1)}_H`=jDvE{9S#Cc6!aDv?jWrq}uK;`{k?tW{8aC z5bS=F3O1jE?|P_*GGWHr`nc| z8r}UW+uPTtU)Qi3!-ya;Se2N&`#*2dxwtC8Zp6G?A#i#8{cz#$2BGbYgjd6sAk8ls z(WahIzkbQDxT_E};z85;{q){4WYyr_wiL>AN$3*0Bk@So^sEvcOMIx^OWjef?EFI? z@PbV_ml!4ss=bQ4q;yT!e!5us)hS^!;`%w#swI7<#=U#YW@$I?8Lx58XSRL8@cTGt z1mDfqCr%aoVzGWx-jmn7PSZ^?F+XFY+VULVcE5;1kEu~vYuzm-RQj`HYjL`*5H04Z z(RBC5)ZV$3k|-gN+r7@Gn1q8|2A$T^(^Cj-hbLj-@mYzoMRwiGJ#bJ|ImBU82yXczoQ?$Aiq-&!db0H}h5 zj$pUIHR>@iFdz_Dr7UE@rm3Nk+n0G$*cUGv;r`wGokqQjg>+E)%k$LUnR7JBjX_eo zjA*eYiFOC3cHGfXg#FbPj?-fojl4z+pK=sHPmjauYsZ)3r2fgd^DT-B)*)~FcsA~F zdbvswfG?;T%)`66C8>*u{$R=gs4eU2DnSv$?Z5J=%OMsNlIo$w7|bAGTe*5dJY8}` zRkKu&=lRt2VXbEOQ10Q(g>YUMI=+J6fLSqhR>r_!7l44f@Ck1hvefg!_A6yrm?@Kt zp^4CS?ByoWi4$U1$J1_)@0gPX&?U`|!P#BPN6g$FxSFN5pZfLKe_6M12WP_k)VBu5 zq~NcUPuJ%i=#W~rINNheYWU(t?X8z{+&HH#G;c4t40C8Kr_-IYSeLgv`0cFqiVt0u zh32X5T3PE{em}Y<)V^jv#t1#mw?!D*Tr(2CFsAc9c%{ZcTXa{2<{3aWS5%8nZ(kH$ zTwKIOl-zXP*TrkLaMd#R<^c*RL&;PEAm<@AQ|<$7Rz=UIG?kT$n^Y}?RK(rjWHN$VdbRV|rT8WKNlGdz`9`1b4QX7%Kj>jyc7ZzTyzdg4F# z=K^&sSMNWvRAOTlH~ZzJbzQyv;N@)`>XxpV+kn0{5G#|ZfWAC%xxY_e(Lb>A z7dg*Nulg71A>(#JeT2Zt^#afD_{pF{0f@F9%1gW~+=+n$o*1bL#I}A`F@THR+4&D1 zee6#UA-&JIrMYuU=fVU|1)$y!@ip>n^p>sq6V z#?gzhXjg@6-<~S2y*93OtqMTp$unoxs3z%rv3Id=f_T#hJ~=GcwLt5j0U?yil{G@r z%)31HfL$d)C%FM>BaH_B59qbFtfOV7?wWSGEcl{Vq_vBrqG9aww$WvLypY~em>6Kh z;ilMl?BLPjJ5k39=;GbgEm@wZ;Bj;UJA<^3P(Wu~cekzG`!cr1Se^a)84LFW8h*Ke z9rQbQAI?5m+wdHKIZ&t0>EYdW(~V0XwwZ153@Xnx+7_p+<@$xl&>D1?ozg2I?RfyS z$8W?Ae5?SH=bYyUA1>P>+D#(4GlqctIQx1mmKm|PBFny0&lj%9Uz|DEr?X&(JJVX% z{8m@5TXEhtGq%hY@3{`6$ibgwA@1JWVt*OWR0m$pX!`1w%09_oaI3P(?N+hCCiT~+ zgZvrK%_?0zUi8oRg{!-?FIZ(HvQXLOh|MKuZBr*PXC#+BDkoz`(@3>}Agl1_r67fM+PS z=Bw5Ra0wVzJdqP6yEHrdcJo=0`+>rgeU}9-keHxeH&k0&n_}4|qk36zFL#I|zhIXT ziVKWxmfjs!YWw5gT7XR$Y`Pv7-9{6|OBgAJ&S~}PMH@T2s8_GNz@_cpgnTn!fyYr8 zQxrY$3-z;*b zioN(!+9dA1*G^7R(I{63(UGKM^PjaR1wd^6$(QfLL*kuQxK^{M`wHq9*c4_h1iyW| z7t@;8!X%uDRA+D!nuyOOThXvUzcW%M zxwM|K?BVm~;G?Ew3=|loE+l8YnxE9kv|LH3GoaHcm`))=^I}gj8QMg?7cNUa7jND} zcdbR(={=+X#{aMZfe&)3Z&YTWzUj1FclS8$nOhMF2@fW}U)uS|K9?aHr?TwM%X$7weBQuN zOQGZ>lgD9&prV#0dME3w2U>ha&gq%oD5>w>_1MPCH>7C{K5tR9wY3EdTtC~#2gDV) zjevjv8L_Fd*Je)(Ko4-YupFiQ1Rdj_#%=Z=%$=>J>VouBy_#A!#=!iO7cOi71iY}M zee}}wiiNNPmX=1jrIcH#vqu?ys4$@LRRf4OHx4|=T??UDp!>D6H<95y*prwL#xqwDv*DlY|Y|&VM z;HW$3R{?k6^E-_oSzNBatHb@tAS11;8!~fi0bC)(37n5j<+UuEewO}gmC(bHA(fY= zB5RCK#z$27>04OvLp~~NMUGaYWe-sE4wF;1t&I|z*dHaG{rH|`PCTE4M)z}FH~ z=MRW4LFy=kynuDIRLIto_gBNN2BCzGm_Pt6+|Abo;e4o{m_cU*&1jgwVV}MymX&WF z2yO#bkHo5=WIq`UB7xH7B;Cf3`YHFLP8zOUPc6{bZDMYI^~;TlPoG|zhBW0TnV6a` z3exe&sIg|`m!fsi6MR8+!=HWN&;AvHii9axanpe9s5=c4;rBjgrza-zkq83j`z4Ke zPIgK$jq9o1p|Lv-@*vc%eT$9q`uG{qgX_%l1o^OLqz2Eg)MKUJgZ>s z{R438XutrKpqdlCr|4P!ApauGi!Zd`K96$aeN7FuRnFJ}I1&-jve}4zX^C_LAZL+i z)G>hqggp&T`{>Zx_^VWNfQW&~XHVo&Y&W={T@& zAJI`&4|`)LsK%X;lUohp0=|Fmx{W>tJ=SxOQBACtsC8m9uoh|Dse%3#+&H!ZbbWk-%bCBAG;GHu=PA2W8Xk0t z7{l*xDPY0th2Mj(N%|6TcPPbk3rXB7l4<6hRAOHjhiRmsQ6v#%8QMq z1At~7d~_0VMknA7L(VT3ERO%M+~<8&Ae9#T>f31_H^#);`p=&~pI6j0H92X!?uO89 zN3(EoCl-(=AHZ(*Zg_;65H0q^3<9 zfOz&iEZ*L5N%ELQ`$vqRxdp9$Q5V~dXNqBBas@G^Lzw9B0b=<}9Y*gbW=J~_&l#g| z2q=> zFx_Z)#DyV3=}vZb_N^8Jy2ChEGVPgNBK0!FVqItTwQQkRb{c)!zfoZUfmsH z)6(kb3vaN{7bV=vsGdp}UTMHSAxXI4Zw~7;n51p|_N1q;ZuuxG{6kh9kOu&n@z9PQI00Z~FWh{u0UB^Y)^Pj3ZOS`+<9 z)?_vFMO8w9ldNZWIQA@t3}ksgAo=k8*^gapYo4Fi-gvtOf}d;al>|dKbnnnMGUCNe z1Z$_M=_xxP_xSjC?%tKgECZO9agex#2D^!bnzyd90t?M0mrcDow1dny08(SKs1jEv zo#*8u)^D^-Vq)fw6O^$3dIx!1&|m< z`7Oo;Ydbp%wj5veIIvuFmBRsYFyeg@=F7w;4N}AicQM&-0C{E+bH%AKS z=&Qt6Na|2H`E}=HJ6xtiPj&D!yNH9h@RK`oiG4&b!xU|H{G(YtuMNA$r^QBC7VI7T z5FS%1;#9GEtBw)pe#^S1Sa4=QC^7fmAUCnbSWAJzd+*Ct1Z#Rgm5Nhxa3+B3E_e@o z48pa7Z-7B3?CTyrR_IsBEv~ftN_?A*+LdIK3M|*Gg>DOqAx*=2MFfsBAfD(JqNtRK z3K{2t6;Ols>FGZJ_CX=H5tLW5h%|1nOv^40#osD;ZGeB`e&5RYMkxS6tf4hd%2Gu2 zjO=6RHv9OrlM@I z*(A^NShIQe&;?yxCX}+04M-EmyZHPz3A&3RRu=}v!p-rO@bUnZET9`9Wku%8(#jTz z^Dq-V!v=W0kgkO=Dxv&YeQ%0h$O`>fqe#s?AE%FIiJB7zU6Qoc+f1CS08GPg_6iCcg_{ z2Na%2Gqvpdz6X6-#snL}5Z6KArRSW4I+hG)jxvz~)s-Sb54Te>XjFB;XI@A;&g$8H zy)n7SaH-Fl+!oMjIGw1DDk$ItUJlY_mxLxt5#%r*#D1t>x7)49)P7C(uxA(Kf5Z;E zz@g_c;*{R$v6Ww!ng#9VDB*JKhTBP?ckfF$ib_cSCLwH4D?%-ZqaxFJ_E2_CP6~pn zp>3?6p7Keu`!}xE&>N`ZxSFIOx`ggAaL=YwIoO3I3-!@x=D>~aOTVbr>U2u4+s{nx z4&>5aCauc-1M%EJic+k1aK?qheywXRk6+Vuu#r7fbv}79zlR68vqB^k!(TDQrlvmT z)3)TR!>Ni8q!Tz&QLo@srOfye&YDzXX#>&k-fh77`XL<++b(|o>gbq)H*Z$sCdP`2 zH0|u~>+2bQ0LTJYc~-8Xg+)?}+v5$v1~=w#WP{tmx>xL0!$2>{21?m-BdrB^HsnI^ zR|db7l9G~CKbe9A6#@R6=pq;y$uS59(+5}cr4KPj3!fAfel+eKRT-&JR*?O_z!%>; zXvbhWgd{Y{P7es3w?@L%g%AwhQqQ#fCpQ1~&A58KNR;yzb&0nTvNZ_{$@1Zq9`_-2 z$fw_rCoVEi;*AJW=#qyQ4Y~yviQ8OlI8ohwZJ2O$DWqXRS$4{(W)ia5r)oMysnrr^ zb&b~k0U(!_VXA?=%nxL3*hO^zG#nobWk8IhX6jY7#0dl>oqjK1_R-IWtM$-X6OYS+ z1YIrzG?u&e?OTiT!1rcke7x^rZjpx(7wm!tnse;<;UOw*+gkm2=8Rj!pSRZZ?K>!P zFty^UQ-@j|5)u<*YL^pK_n}#s8tzbxwRD}VQzN$ruFL$TIn&lWr-o?CN8=-cg70G9 zBx$5oSR{;+Sv9Em14eJ6f*!iDEluMAVBwc}dF;sdn3#tz=SOFeXAcN@H&wpCoF@tP zCeBUUzo63t)J0G2u{y1y*7yjt#y(OzU>GDT7?kyd zn^{;eWfp$Gv0yvYDrXn1f$7nj?lj#}1b^mKe=g5Bb0zKmRsa$r#A~rnHC_rlj#A2% z@(q}PT$gmC7? z%kvbYcN|6PuHRX=e=xcWAp;?X{1CnCq}J%CkeRnArO4-koX2W!>U?9=jo8bj}bC%0)+a%`EMO%^Y6GiWtCOVAB3y$|yvKQ-_o zq~al>c8t2Nv)l7FmA^n0)h#6rS5OX*t++f*j zW^6n%D`Eppbp3^gIJ^Gg;kgavOjOMbmu2s@-7XC2X%}~In)~%Jw1bM8^|4v5^Los8 zj~vHJ{IHh)YZ4tD9nMyIz@_l}WnS5j;5j-iy$Ea*==!40PQZ*%MaR-=_)etraUGwV zB)^zg{uQWkftOe5OBKn24>t{U0j`N+Tv+)j?>C(rkrNXWUyB&Jzc^v1q7o$nV@$qg zf@eR4vSJ%f4Q6_3{P0a!@uony-PU>N+xPEY2*E({vVvsCLYCTPxh^z6uFhnxyScfU zh(-yLi(-9C+Ho4WfOtl8l&yZ-g?}_;*@CaFH&TeJ^9$x!CgM9lmqM^`K+=A2XWY-v zL5GRh&NQxWO#s&@CZxh4p|7V`xR26QS69-f$I8MYvx6CWqwDg~Vh|Cb*u#w^1&A2{ zul6AuY^=~dUDbyUq+i$b3Ei+D2Z!#D{=yHC`~9=w?ns@Q zF6zV|$TBO2mtduj!R}8Bwc$&fK-Zy{MeA~N^?sanM1ATy$fRolQ3wGoY3b;IYL0$a zR=f<$*Tf`F@NX-v`#Pd%SW5K+MGdxEyL+Q{yCt#uy+*?B0|(g0i&+M2XXhQdx<)q} zRfnChwmw498c_+&lSEC8T&ydb)i$p2CJNKoGBkTD|4F=>qAtZu4FX7)JgZP_;W(*_JtSE0=top(+J2O=jYt)NhKry8d+4A)lu^#@e9DTW9USsdsY z5*eSI{PouyHcW4KdPYWr(UxPlBMtMW;d}h+L^3dw?3LfqyF2r^8Y>PF_^UmS2Jbosk2P;dzw z$$Ro8Lw9&Gqn=(C`twWkDmTTi7nuhZgtKCGAYSW>x{D1`a_OGKx4}=If z%y_?B$NC5I7HKLj8gU}&F+%Cn^U`gfc<%sT`wG(r-&d3wz+f30T3viW&am68*HTew!%L!EQ|xY_i!J-(w?7^%d^%0Y+8eW50(8|nItyi zHDc0$>|9FQ{M=*z(i!2{zV0^-zzm2uxu&+33J=6%N6!vfh#pn;Zl=%@pEaoM@fUi# z8Wvs%nr)@16Kps_DY**X1BN^uCLBMTW^uBA#CjdU69%N1^F7eAY?cQ{CkO~jc|hV2gVv-Z$x;2*f{d#zWV5B^B=^y0@WPO7Rb1OY{0 zKxsdeFgq%$aE_c3vjaFmMh{)iXu;)p2NY(lw)ShIhh|IIW`r%4uo$i=rZDluDIU25 zwX?kEp=9QG->GDpea?FB-O_saLLmLGgivYm#<*7@en*|A1k$|CDo?L^-QxXX!d zWqAC7Pg#q+YPj(`cr2cexzj9N9&aixE#4UKt4cY?{PDTQ%U){{f_FkA3!lSif2r$x z5hol&psM^b6(*lD37%UWS69(^;U=z5K85Wia8lg?f#~!ZGxzEh@ueaniuwG|W`#r7ij?$tEF6emu3~_T#_L5&aS%dz5bzO|8I_F$ITU z4Q;eG`*Ww;o$w~NTXEudo@%8E;F4yRm3qcyh0b-Qw@i_}8?=xNcV$0hPtCRb1~z*c zwb8CK9As4y>K?i>GP)fqvJ|^v9nv0&acY?k6HU!YikDBB=Ku3afKbW26Db^}vbW4y z#(wn23HYH%_ey+#WIQEqwj%y*l$yQ)!$VsTCd!ti%-gt1d1&>qaV;An2K-xD!cn%} zDs+S5_{HFY*qUBzUtaHOvGH{WLQbY7aM7=FnqKG52Sz}0CDI@>OL));%8i5}B*bpAIa`O7Q68-Va##B&nq z3vuQY>Af`T$hyg^nxJv?huwtZ;`91QDbjzYDa+uf!UcsoUVYN+$(iWt2{W`oo=7n) zye^pfObq)}Z1(44``x+kE!DwX1t!%*M{C3snj5*_yTxg}R7@AAZH z5BXjzq-6nY!}I>`+9MDj!HIq7+Thsq_=jQ&!(TBPX7V2V(G=T!*48F#n5*K~4Pu%F z{{`t&iQDqDo5AwZ;>;HdSE|4IJQ|>}2a!KX56Y~L;RdE&bnm$gH7wlLTau6fG{5lV ztFmRZjzwegO1x@f)dyCF9}xZZPCdbag7y%j<3}^=&%PA{Xc~z0a00MbT&e1M(fCT<^Pz%@Jp}OH9&c(SJ&{I9#t>FR~JPPsOq*f9uEG^9Uw(j zfDf)PqIM@d0(h`~tzoF$4x9^s;zPjTWZ~*JV#`L3+Sc}fWCcmimMfw- zq($t}DNdJ7W@ctsB}HT&G{g{&h8ra{LS0l;HpNn6RO37opS|#q({P5 zhU~;!W~IlDQtc_J04_u%-hTLynG~G}Cq#*DS76_50gfI1mBQpphx-Q#tv{pxsB&Ty~ z!=6FLaZb;cV*UN=lFZs{-u`bbfRQ|vU@{zaBj9%RM}L%1B-qzbqedb5B|yhrFSL{t zA8vZt+#>L$mOwiyZv{jfP;VlSg$*_F?WHAGbWm_M;o@n{w4wrs!V>tn{0c#`acoJ< zbW-`7KgVg-Uv7f72uXHi)SJCHTl3j>HQ&B{Xl^&hDuOsK<_0m=~NZ)eMD97JO22ru0bxKfrZL~g|)6z zso@d8)X-_*cq|QHn&1`M?kDh6%o3gUk-~j ziSGi*$NeJGf*aDv(b>!_p={XjKR!D)#fCPb9{>PC((5r@6u>0q+JYtc9%6&S!YpNo zE7D_A`+Arex;_*o0zEKkvrqi|*6{qb)Y~?566*m>2Bk0wns+>BE41Bu#SCnc6XTr< zSgrv7QA{58b3h&VN0;@#E!eFOZZYl`Vq%2r65WR7z%}<{Us}i$m?;(mG)!Z10#0K3zG=tk=sCm3QlvaFt2na3(T(m&DqGI}SsL6@-1f7Jb8iO6|(*KRtm2K&}MEPbyd{pG` z0f$@KPc7}6CBIJz5}+$z63eTrPXVdNRb^ml9XYoZ#GO4RuB9OM7@Z0s?m$8`W>|3I zTOD84LXHV;25}QOBn%GJ?v&dABO6=IKVCjYhXgLUM3$SdZj)ZG-ia1vlpDBGG2{SS zjt#ampKi&v*$1G7OiqSCwF~1QiwX-@p#N>#*4D*lviUR(dnwo-{e;w5>Tdx7&s)x7 z`f^gpig^!+92CxB&?UX9k>O0QH3}VTk_cs5D>{7vZPWUHxxOAsAYRGcwRYhEqt4C;38QxloNU2mjR&~M>m;G%vQ z7N$U#6GCb|dJ$+*e)9Wpu8f|kuv}eyT{haSvY z{KlPuIt#T3^vsBok;2J|ok)*>c?(IBKUx&W zMn|qnVC`FJc~?-6!hR~A|0um>@Kbd)5$FL`cmR1i1q~<2P^&i$i_mWa zk`hTQsDZ}-q494e_%^NihnZeoGy9Fo-taW*@grPv@4^n1A;LgF;1T>~(HF9w31{QKlN=Dp&sxxqUy!WN!Ibh8`3oyUjq zQQv<2LjYm{O_2@#y*oT^#sH>Xi+Ylf(QZr5$Vfdz$Y^QJbTBGqO=|*8B+H|d zYTDYwV+!O}AKto-c5XTSdJ_cF*FmTeaEXXLQD>0~3C@@#dM{Pnl7h9q08GXI)UkNH zP@5@GwIB-OV{cLFo{SvB&>%34dhbok{Mf;cGH;55Odz@`%7W{#u@Jp zk(a{h+&BN}%?$SXzohP3M_YVn8fyZm8~Wh!`H*pHkdDL^wS^a+tIyi<&e2f^HAX&N zO+^RyE~e~$i9S$r3dRmyS@#x_sn%?p%Hf-qV!rhyvOJHiXm7QZCn6!}=Cv=`4&ztJ zw6}?Vlt2)tM8Q;!}f*z6_zRsaj!)NAh)b0#=cj5WFYIF9=%(#c)66 zl=HcB4A2ynJ=GWGAmewDgiEr0$-qbKx^{aC14h`}X}Lc@X90_EYz(zDvvkV`za8{d zQvn3N9ViLi>XLrMVeg>!?oBd0kHITuzsmD}+BLU!NT?k60T3bIVITw&y&8?s8IhP- zo1qI;UB=aC(V76ESNF6WLM?LW(4m9q&q*zUO^Tc4MWy`)YIIZrCUkU(6Eg@wsLDEf zjZwZdYug_X>cg9)qG!DZs2MQJ*8toqd=IgeUv^(U*)1?jCO%@SRmOzT*ok^o{6+n( z=TO?Isy-ua2L9RjcQ?hx5ffWTq@IEJJKEPo(`YTX(Cp@EnCyJCJ3$$!9 zY$(K0WbG%?gyl7_sd-@;>Ie!0-#NwPjFMlps9P*}B4|8Z3^7Gr9W zt`1R((jS%MA>926i{5BGc_?pUOZ1D-`myCWWstdM zZAlx7(j71y34L5@LV(c1TtfjEYLm3c#KfvtTg?Pj!cAY@cAot@q#7OF+wowkAwOG% ze=Dl7Vto7u^;m>;9F7nfOwmU$3Pz&NO=4jX-+xY9VRT_I*<02((FM?JSXrgC_>~*mOg(ug*0RR}mu7ahhw`QT^z>)Smn4LRgDzgm z&&_pijm-t%jOu;Y1S^gp+%+Kc#7Z*n@f*s`!1YSP01MyO? zRG(%1!Na@c{g**3!L0eUw$}5nFS4rMFN$bWFUF}7l@LKpaGD}swo(kKdsNcQ8!HyJ zB)sSTx3L_e2mm|7)55|WPzkAvW`i@850_xa(v6?nirY&zrU^$>3St2X=K>v$G>|sv z&(0e0*q?oF72i*<7IO(jF(PaFr-jRki;F4iILX!Q(0TX%eFHIR+t{l1K)5ILkh}?@ z&wy9xBW#FW|59bxoCGwvU_Ne-I^pMa{w z_TGos^tV`V)VJ6mh0k$s-?AyrdC-I^lsT?Jx%>cjfbgez$)Uci01Anc#@F{Flr%sa zv=p+%&!NtQ9=Lyc_V-$%-2&xiKd3X*m_ntW(ijC_BS~fm<|rU9FX%8GPF#W0(Y3v+ z_KssRnc+F2Js8;g7YjxOJd~b)8(MitU1BW_VB-EYa8b+MEA99svV=qOYmY4q-e~uAuek~6R_^3k$x%chc zm-pM*27c#I_K>s6xKy$4uxF|6%C35&QZXZ@K&C(wrz2PeOisEAw(q0?9 z+lRg%;$D20qgx+zn6WXzmSU0?d{kR&2Xk`FedXW{?eeU#&B~0!5>OC^z)OpY4>_&N*;w&;TjirV^lo8{y3kJ&3@sfRKvbig*aj0v0lwTg+j zftm~o>WwTwpDP|=4lNW7R-RXh{wPWiZV1HyeL&(gBtzr;-xTr}m=CR4uv(}-< z7|wnE%Qyd6_dHmhr=YrSREkDE$XWni*ODgJfHlt*RQf+~TK1ZP)yrSx!o^Wo_;*#E z#uioYAAoqqV%1ds+q3PoR-MGBGV+*;JIKC(N> z$mz0Q+fkbS0M&?VV~MDL0C%xBxI`%|Z$uhB$}VJh2CmzXr=w`ZI3x1F_5FnX8A-!K z&+JpuE^y0{z!WTG3Rx50RBE4~i?EK(i*DFM3ODIh2A`1xIJeRYoZ(P18+ zs6Uo@W+*;xWQEjpk?VZD@LHb6?S4>2adC6QsF@LuzzoxI>tN1StCV@}&yTPMey?*1!KR#t}U zy&(3q^4waI(=)dgvI`WywXuq);En0;<@N^7giu*}j}feSUTW!Nzr~UHr(t1!0FAKT zkxzp`_Qi%~f5$FO7&kn;E5@(I{l{i_nhPVowpocc9;GAnXG>2EgnYQOAd9)e-VH{o zpyeP(W^)f_Ob|MdNvnKg^|HmVc~rAd^#beYsXx0rhuM%Bo|+w(nc1x9xc6JdyZs>Gxg?p~pbvLk$APyeC(%y-k0~n+3;r7? z{t4)9^wM13j15qEcRK(DD`Ks}Vg$P)_dW*ZEnSwlbH4k?gmsdb~27$GtJL+kpfAaiZF5R0VCXHgKu)y!?(C*1bsqOQT! zitnFO3Z6ArY>;`zxn@7JOua9J*%vQ0nnHU)sW61K4{7C{6^6>nwQseuu3Tb40fXm0 z@_g#hp?A4ze8>wdvfA!@k`mvx8)rRg0uketqhThW;+397JAzHww{8`QUD5WL_4@702ag>2IXV0yB;+Hpj=g!a zr@Xq&B<yASanbuyk5s);pXC<<&(krq@%Oeh=t$I&k13M#YR$Cq~aB5OfxR zSL)~s!n|J_A=!CmsHXBTB`$95_OjLO-J*6wAisl+_tKYHAvGiNiklPeU{@&E<|Zuw zB(#MJbBHA&{}n24uiLlprEmHzWPT|+-5$}2g;x%(mKYcI!>si0!AS`+^p9x&tTh?@ zfn{RzPc=S$R<^N6LNtySAa?W|b~fineobSPI$820nFtfvu5^owi1b-S*Vo-p+&x%w zk=-@=++M6?qWu|;MpetLw;a^Za+y#6+0e|IXns(pg@RFXm^b1J z70vyj*2|YvznLHGm~WpZA?UM{7Df_f98Yi-;fzJv#%hkh>}{WA?B6C?0oVi7gFhIX zgNc0Xxb_zo`Folj&4jy~s>_s}%0ZnF&>R7|dW!=%Ey+CsbP|LN(=t*Dd#1hgBE-@H zPh5>k<-uOxydY^GRz|Wxk8aMrlG^m}*)u`jqo4Fs zUZ$j+A2S{BN0Jn1)|wR*pzLDl;n%NSdo*BSVPYaJYE4fR%x?fn{%F5NYz23)!^DEIBRFuDZ&P0_6#HI9;V7@BO5e2NYW<4q*iS12|42 zdiQjV>${8$R+u2H-9q7e#>9&moL4zHCzKvW-61hF)LrUnDSfxi-%_&*^Eyac4fpNNa>^PH=N$5UV~C!@|!1a-byd=>XF zir?nyv&RsSIL0SoHtN1v`(0k~?0@bQ4OE)|JUy~r?>k!EUUFR!h|T#C?{9T7it%|| zmG7X^nx3;m&Oq0;j+xT6e>@>yr4Ig&ho>owx6=TtgcGXa_5Yo6};Sw<)W#gF{wlB8{%H*D6EH z>&y-2lU;*;>FJ$&N( zmRO`F9}4na<%bn;{Lc!ofxn?f%qdT&AaZYkVL)aF?~n=xkf{=vYfr=8c}1{QKYhAmyrQDc^+tYVjC;KB!BnTujg4&iNTsFVo+4SYVa{W6sQ-SDAmNaz-p(cx zgXc%-#GeO--mxtOi3Yd29k4OzX)mH#O2*XFB0W6KWUt)oZhgdii-R6{Q$|pxg zMm&~o$A&qsk({gXZ`JMY?#@x$>bBUgOM#lElo*21Wi0fm72I&s1=9-}Oh8cZcf;^t zU*Cq@Ff+5-&7H_CNDb1f&QTJe<2@3lk~A2VY8?w$=k;pzer*rqi}%2Nr$*6>+Wj>a2sOqxg-vk zq4vD{aFLTtUf0F;uCB{C?fw>^%%Mj>4JPq0WRzM&G)`<3ipl?USkhF;b6PUdy|&lO z<-6ami~K)+ckBK%7!M!AE69J{(0X0)KFcrV-J6bF8+nXLX;-ei>Y1{~hwY(c*}bN# zR=x6L>_MfaNGMy5=xsN*Q}<0X5{r7RKM4GiYUfV;a##f>EIWqOo26q53$w&Dx7DWM1+YG%Tc z`9s7Y{CZ|GM^sd_n?Zs@%wB0E6FM75pN}_g;+2x>b$svs{ja7T?sr&hO1#eT)F?KS!&3HOF zlL0vxc_0L}Soip_ok)SPB*xi`b?1U50+3ARllmX94}6<*?j^_+@|dLp`j>~%q+=cd z*Pm<3{LeKdawAJ?q-3s{QF=x7aI(;%N(#Ux3 z@VtGe!B3TfdpS8g8}$FJ1(+Vr_Fs;Cv+1c@7;~S*n-gRqy7f4+veKSu;0 zYIR;8Z24egZM{QCNZmTNQh$@ZjlA$kGw1T!h1gneS)VeWM=nd;ji+KwpS6bL&vPCY z?a3Tk9@^P(rM6Zf@IRG&jtKY6yPO_6$(fZp4!<@dumcZgp}$~hAH?KiCF-*!{H@+w z9m2{w7QS@oEzV5}fr5$`Sx2;?hK9d9Bsy>(*9`4}A`0JrTwRx<=r(rX&aUW`6ai#t z-3d!Nixeh6NO~D9+?+SP9@gFeb5#E#N44F)&(02lFTUtqV$s&tu9V2I%@>=0uo7bIg5I@F8d1|LqI`dQLB=1S9SA8e6W|FraljQs`9rV~Z^WBKqMA$bS zf&?f0T!lHb_ssp1P=0-ynt3~Q=DqIxPNmMiBR|%tEJpNeFL=$T%+K&nDe9$s=_vZR z@lW}B5)B2ot+HqDx0g9AYN5m}(p~zco1K%`n(MHUNqmA?Vrj-eD71E^Cz8SzrZQ^X zGcl>+)^OO^R1mUKR^wwkxL`tGNQf*B5zw_g3W;=P?YUdv%6sgbi$j+G&msF1m;~`J z>f{+i^_ZpR1lu@dA3U>bqu3sob7jx%4y+{N0~k_@ZeF=$Tci7A7-q?ih2O{Q5oJA! ztdJ~CMO$lYz2e&puB^TTLqk)UbNFlbZ#{iuaESinY~FMY=ScXl3mqPhOtlizjkmfq zc3F(5G`fS`9*jNf$Sj!7Fk8M)!7nNJSvjK6-NF$!bAJmv`{sl_T_*fE3vd(1xwo00 zQc-zgd~Cg2dYPhdtYvR0x7LvDlD|t7H^~Okz z5hsncR@HVorZdn;p}I#EP3^z!!AaOQofdP#+?E_5_WQhO15O+My<`1brrMo`5A@yq z6kSlDYaLh%C4347nb>Lj(E0OUbYXDABDQl>K@-+FF8vuQ+1>0O%=I zeZ&RNxiCk0;aH{Dl7oEIFyD>#e%beRVaj3MViue6wBE6~Q*%@zEM;Y7Cq%i)bSX^E z0&MU)F_DG+c>B9vL6?#CK-6JPDT#iVU5c#l>zVI ziQYm)bld?WBb3gc|7TVmmAlTLBXKWi9#XmUSG42CrY=4R*`hAXB&*iucJF(SQug16 z^aM9iO`U3}g3qJ%%lmTY(Y&r1&K>vbNTA?aM<*nnn2wSL>XNk_*k$9_(&|_f)HKNg z!56f=wip4a{#et0_aAB5WEh2E}kO#P^8vP8Yo=>T(Ki5mq1Say# zF!02^)|nY0e3_zyzMY9jEt2=&$2`vFU$XRuNT;x!okxJY2m-!;dq$qb&AV zQm58(mG8w)=3En+&40)1j+MYXku4{566ZC?hD_0Lq$apU&@Ys8q)_>j>4c7ly%LBy&K4x}Trly~IrDsen4)P0T!c?AY1#AHVm$ z6h7S1oOYnO<=!wXYgm(;a`_VPP3fDhLK&kePaA0*#qauI(Y{`F+D@dSv_D2a-1Q{j zWYD~w!qC3JSS2+!nieb$71!E!j^)(b8x|~DG>4KbI-J+-6wSvrBbGGO zxlZv(0*BsBh~@*V67n0*^84Tk&m$3i)fjVeYT{A&|9KSmDMEGywh^qSEV7!bg1%fW zxX(Q2+3irHatluzp!+|fqMFwFd2EB+tUvIaQ#C5@_V)L045j}CQ4It{(7TMgyURZ)%Jd*W9>L~jZz)x{5flEOx!F27$N5>DC3~JEq+AjKkuB7|{2j4ag z+Co7|i*CXsO+>GE{e5jWf<;=-kKrW8MK=7unz|BrD%Y=j6XhZ)LWL4iQB*?4Xr!XS zSVAIFnKN@T7q^5^DoVE`Q^v?}h(eM|DD$k$V+hB$o}=6MzrTLBJLEm@dEe*R&)#dT zy>@E;zX>%R>N}C`06m;KQJE$Vf)1VC+v*o}6jhy#Pp ztgzgt=!Li?`_#KO8|VJ#oWM8GnE>=wyaK&M#^uS8Up2N`fBEvo7;07^kRV0E-Njd^ z)^gLKT*llcc1#*ZEI>XxmA~c-bf&nl|5?!5JFP!tQYBtT|9Vl;Wry_wdm5c#Yg69y z<<);NyrF9mG=}q_vxYhjy%zb~KICxK9WEP?f7z7FBbWTLV=OnuZIGSSBe` zy6ix4l3EwCfo}#9nuD56rIdn6{^1yDmszFg9(4LK&Huz&N5|}8CCA!O4Ca77ip6kw z`nP`V%0&rtoTw?%MRMyfpkUC+&=bfZ^xaSnaI9L@mFm~`{rj`dDi(^frSe^{O-Q#0 zDC()S#7D3--V6-sqWH%|@`&zr=ua>T;E-&(D=N~6?z*h( zb&z|`XuqGK6izd=nc~+zquDERO=%WktIK%iv$CXt{5T*F;>nRR zgS!V^#6QbOO0LhI%S*cK8srM#xU<7-D_nUB(aqa!5cZ^AU?^!JNfv*`f7a14E4R=H zLOMuu8L27IO~B(KG$x%I6BbwaB!M^iqt!E*a7nW5wD!31}5Kj36;Hj`?j_d1h zo^}@W<)AOd#4bI`qlARR4t5U!4})#vlXHNhz?m~mY4L9du{Q-jCB1{d7xaOHkql&# zShgwEg4|=STfewpkN{NDDyuP?n#OI*CtCmcc8`kq0(a*Eu#DCda>Le#x`w!g+NxKHM`?1u#p)~j&7p_iml{bBTwb#_2@3D2H}4s?eD znvI-|ww2{u;DA``4^)jQ5Qo>Wax%uXJ-20U8`zy2IIN(e1~|pCL>r_X)}#pK{M0#+ zTcAt0gUmj-ETlRL;~)2WPwX;~*LF`bO6RQ;!>vo-J32a|!YsIxL^xI2dy`b6b%bNO zcfyrsyRNbMkzh&*I^=_Zn>tT0^lq+Ff)W^5-^xo%>uRN&3_qVg{p$Ic*O!I{v3kQ3 z2{k4V+(D9Fh(51>Fw3!x3@^h#2#A6(MvC`EAAr3G2e;g~j7S3K`}=?HR5AITrsbY9 z*tL`)Rk8UrRI07A>=4?ixJ*M1fs^(t^a#);0^c4+<9%yG3r$)8gQd`3M8<}IHd-}1 z356aUY(kagXCa#ujdFE>fuB>5$)gUOwT3lydWn7EAt5SPxR?bixJhW}BrYO87(NUc z)~rUb#l?Hc8$Dr`NY`=06byy>#$OEeEiFSMW->}j7zU+kbEP0YzC13nsmm0P7mAY( zmUaRJ-Z-$cr;!4Y@SaD<=;s=d7EIV>P8kG_UjzCdd_m%ip&c;~C`9yTN;wG~v7Ed- z&z#}k4u%D|1sE#eyLBgi7*il)ClNye2XCe6iG%wSvkSNl;pw+a+)aXAEbW0cb@-2C zOV-EVWDqpn8e7O9=*w(VV+0*t0Kmn@mHo?fmFBBFf9`Z2yVtT0Wi0a7?!52NZ3Mgg zjLz!mb$GR^$uP7-wx|lGrKFJ=cC@d)_sHA3*`PDTbcg<)x~px0c|q8Qf!V?vq9+x@dD57NUTbn1BA~bv^DhUKn?`vD}iWW7U0HuPka=% zpc;*Bq;z;#lGlF)AB8Z1@mkQCjpP)(H8GHQ{um|BW>V+~3IL7cQ*!48a*wRkle#G@ zBcl-A|H{hi;2a*6+1?fZP;Vh4R?LdLbn#-??EWTV7bkF0J^OivTRN+knLg=22PY04 z!J-^P>;fze5=@mR!Lh?afrU1R#dzw0!Fg!2a56ADu}$MkoyJ1MqAMC;Ci0KS3Uj9B z632s;oxQ5*fMFoI`}^jK2s0!`QccWX@zA#KxtH)Bnp7_y)(gQdqXh&o4DKxC<{sQZ!x1* zM-Bg_-yS?NV*6>0C{#+!?Cj`Qy<>6F==b1Dj74mfwJNGhfC~>YE5u@GQ$l7vMSVGp z=n=&I*r`)2=r)0iqPT2K%dYL*mZ@KBYyE)(!c}Ek?(=ak7<9KLn-4z(b+-Y#3b2)p zSeh6$H#fIo?u50}8uOzZh-%Bw5(8Nk?AuN7anQ)J6~oxVL&fVpB03nlqHya7vlVOB zsD}lby)#J_x73ZmZDW9|&spA2P2$b)nkz!}NF=_X!bykZix)Pv|9-WQ^6ro|zz|5x zr)EHbHYr>+M%ohG-Sb-6*XwR6Q%AFUyx3u^FeC;0`z~gGep(_|KjoSa%?pIkBGjtC z1xt)b*~GCfr&j`c0hqv2XC0L5sGN8Qg>;iuTMphOQj%pD zeB;L7$x~2zlR-&H|GuJ|(L1H?{m$BuI3$dPN^yK)2Hl$-7V_RXx(=pfgW7tag@-rxuJoeg?AKrVnrfYL-O;i=&X zglj;8xB&0!yVR=>zLq2cOEO zDcn^6h~&MHt+~t5Iohe^F+NCO{wb2JPldW50o^XK)VN)+vRYCsdFRfZTeGV>#Gq1$ z?m@T7dS0#T@cdC#^|rWG7t~w*%z|F~$QSR5tgirbeWmWd~eRAhRNVt*s;QV@Y`#mHSypz+jo$x-uvl>Gw&6tgJW7-7QB{`2`g|F}NPiXIt@nKu}9yThT%y_lTT z!dC&GpwK|FbSo^ZW6bhjkTqEA&_r$~^;^oj$Vqr>LPN}$CmW5!vc~d37!_wJgeBMy z=%om3Z8fGQ*S-JyNx3PuJv?#lhFcF}NlU-J zBwdxW6aX70dKTHpwK&U*IQ(aO$B!I1QW)hU zr+O#qi~#iSf#w~5VH9hDe${o1pLdE2_jA~GH-*0!y&sT&iaF<@Muv;cjK@P=M z+=`C7Q0kp3^MaqD2owShWJdeecP%(UAosrxhade_Z6IARXmEswGQtDDqu01DL%l{u z(&blA88agdrm>MhtK>Bc3@y{WDuzJ@ z#eD;oE00keyFq~xH{WpRN^TXVr!9gp{ubm_$eeAkhTziFigLpTPFCm7Z@h6qwJeIL zR+#loAe;q}i#{jkA5S8Yp#(xYhI$&a5nuQHedyuKJre$)K|h68{gD{$dogeh(pSBR zGsgd=`ld()@LcsPD=KdefSJ>#(;6&?9}Sb~(9 z5)#2DqEP1xkl<%}7dka>mx{3qe=uxEiBZ(qu?f*IN+&Z4baZOd^d|a;hIqu&boKNw zrsH?+#DKPipSg-=Fn%T@qcN_id`M;`FLD8_RMz^Mb`}#T1DThk;xL8B9zo%1B_NFF z-fD3Ns{yMMrd(%+ol&k3RS;!KrIeD=Hr{>XIw)PANUTu3#!TPqJ8autGob?gwQIZn z^MOwVI2yb);_P2K-^Y|5W?1fUR90JAT8<{kaKq8xG(m3Vxl-HD6rVz4!{o&E2WDD_Iyi$P&G8d%>LqqCou#9)x%-Y!u(n*)Zl93|6aW z9(at@KVnu%$jb><14Xf(CJQJjG3LYp`>du{U;ZrAp}EHrZp()#WX8-6&C{&O1VmC{ z^Pl-$t$VOzSeFf7&lP^A)W1IBLkMCx?QsBw>MHsQSPcYs@U<~(c~9gkn)k&Tqwm%j z9!i9iL~%2MqGnh@;)iL8$gK$;0^$k?utP$HD=<`9W^RCFx>@=O8a9wy6e1TToD&9~ ztwxVm`o>i83bgbuLaq@S47LdQggMjK^E6;QspN<;zV+faZo0k)B?Uoh(-Mt87N5rD z$YdkPCE_K81bv;;Bs)4Om9H}2R{;@?-T7V0wW_MsGo1m(l!Le z!Q&6SE$98R+68QrsAN!p0-y%SC)?MIi48!5J~zpkggGD+%5FD0ae@J539 zRY$!oE&YT!lm2J-IUR8+zJmPzNp9gbz)`j&xxZxwmnm$-fHbAiA<54dTKxx2an>u5i`Y z7d&%Ar-a&o5UR0*^zX1LHY`Y%*HV_g45d0EHZB-jGZ! zPzRPDdgCOJKd-)4^BEZqgr3<<(*XU6)Op|OQ8bNvb!5A|^lA~XZ8dFPc6-)_H!SRA zsAh)2gs^~th@#7=FnB~^s?oJ^{B8pQ)$ZH?Sd*k#u=cTH|AJTl>KWSOf?!O_iA`I! ztaR^|WaGSLl9rsj6%`NxEN!&^s*Sq&9V&&DUTUcTCm-jDmuJUyDHKfBraQsmCP~7*Z2h**Jbw0o+>ZCE z4F}O)KRDpqKB&V4>xS}o23D0u zXx7XUX>b&ow7JrbzntP(7BhmyXx*&FnUGq3!GxSiR?PHNVhD9OfGus_H3N+_wq~yD7h7tB8<>+tDKRqm4Y71Yx z(Wx;}QBjneeqgF0W}+@;!O;(p1Mod0I{$P|F2*Xtyw^%a6ZN((-RZ;P3k?6!W zMs0-}8(5yV#5^#+*swm-eRwi}VOW>!2DV<5)}JR9=`?tx?Z+99?-uviZN3!9_=`Fj z`aSw-FJ;#;^)p&YN=Dqn2J>mEEM<1%#DCa3$|xjMoqL_E4t_Ee9>M6)NvfVMS|=N=vpDUt}owGV!9&q^wiM2 z%$(anYxx)ExyxeQ$KMElpQPsBnBOfu)l>d~t9g20V82BF_oyl62fARp(9R_?Jt10g z5N&97c6N+TTS-||c;?}eqetsD+1|J(@AUM=xrR7_((2PvWuj}0cH3fu2 zT@{f{OzZp#WB||NfQI?7w^$~$(4g?fGz|FIMGfEemlm2&KJ{V7gX~E8YVM&qeeb2s zmiZ;nS9ng|Tah<9YwkQbd)Xn=O`~nNuCr5EFJhHJycu2nDs@*77L?qd9>^cQie{8Jw)7T<}oYp+vY_ckG_ zDsSo=kx>VY<3(*qF){faI!Tn)o#QIF|ku-q^ZNGf6pt$ z_C0SS#B5~mPxb#&bg%C_^Y9#k7~;L-fz5EPP=DfWu#LyP8`=%JgVR{aT7@dO%NnE0 z1|45vv!^&!%TCd;BK^Gv6Fi-E)84%j&KMR#a#^C{>`30mLOXK1{`AI&%?$y49+Q%; z4PJG$;+uG>+jn*CYnx|lJ19zJ)^VU+V9*?5>E|B%4e}k$MHT~)&o1ZsdUPg1V+gji zD#rxQD|O)~3h<*!?t8N8`{G;=2^%1U>7bpA&vC2wkV)Y`ee^+dDts%r+h z2MUSXvr(a4m2_5ABV$guSkj*5UzQvvYZeJw#TBPOpX%LBN~80%2J^3T%cc9>8kfv1 zJvTT{t1L}vcWqIeoYbM6XA~W?VwC!RKJ(Q6i^;@_4^`XO0uQ%6-jQyTgMJ{nswg!3 z@|4X;i!RV3{H_m>0wmOsBN75p?>F4}Fn1xyBsuEbd*5t1A>+`YG-}tMu5-aYed%zn zeRWblLf~bE^r1DUq6Qzvd-AzuH4Gn*8}j2nx-rZmL@vibV?gA(E{G`z6*tQsz=#$= zd_DO*LoG3{2UF^gSx+@K{b+mg-g9FRFnV&4PB zFDX;*1q>XOp#BRDZ)|hE1rYAqpfh*~kWWDZde3CsZw67e>FCnBx6Za^emh;D?Civq zlsEZ<13)J#0Q9tRpScc~qEI85G&`_a@Z~m;oI^v^9*l`^{5CdyXYsG)Z*6Q!wGDom z{+eMQ%x38;HR8IE=Va}w>m$Y#`}nenj$8Q~>`Hnm#+U6K3<`OyH|K=5HW_seW2DDv zX(vYeP!8|oBdLw=`?kY#OuBC6nBiL1A#D!3P#TT4f4TVk@vxIJ$B$>dhzR46Fk~#X z_3p_)vja@P5Le6Ig`v|5ycBb@E?+4Up^MFKV@+d^KhiELBP*Ng(hLZ>r`T#$)oUZ0 zI)6PONZ`nwcvyoh@lhFH4P_fcxH_3P`a-;Kl%L|REGNf;dR1?r01oo?hgVV|Ir@|=p8PWmsi44+CJsN6rTH&cDs8&HnY{9; z!4Z`Vsiva%*|lYgJ6;HPyhk74`E+ogI5&fc znFYm|7oKRvAL1XyF3RjZs1cF%0zXHUk!N`tn)HQ=(AUfB$=&fh%2_UQtclK#Z1J4W zZ75*c=xmsgZwfc>X7{n9O}2~Yn~ z8S81TePe&%Fb=jtMHFAmM)SYwz+nNpK`T}e48`+?U$a640A0aDITqw340NvXTAl38 zV(R=16$D%ddYs7A!_})*Amr6l>_s}>n6wrW(@5dM*3YJEO1}?GI~{=?#2NF_LK!@*hN->n8C@oQUQTA-3%Is)d@nJdmu)O{F`7?w6Sw?x4YY1q# zI@f^%PZvkvF#=C4tE{}DtcfL=s6dYcX~vogBaEISK}ODsIW|Y{!=V8btgfzZVZ$-Z z_Mos-@xMaoj1D>^$Hz_z_p^32w~210>OrDA=7NF@Mf5GT9ec|DO*wbz>7mbGPW+Ks z^8-oJJXesEvZ(^NoL_BB6^Je8u$u$&rEXW5UJZnqZ@mZogV7U3pyuwaKzGKZRw|Ran+V$`dmc1THuk}>S4a)E>P&4&U0tcM+bNmK@3cV zXYdd7|HFELNBv3YiEAiz!|5pCt*gM)P;#(ANr;wArm?sAg8S!~>fR;B{S2k|tDPCG zf~_eEVz4dnd0fG_9I849tkm9m{YSoHoV+3y&D@$&BvUxZz~RF-PRbFVvWi|%-@1zQ z6+On1Bo%q%X7pLeU|@4(ERE1OOg|8-j}Z-&`C*+Dc$XnU6IG~%h2HpfD8vB9diQS1 z$UN$#0iP7IVSk2T?JuF%!ey~-vSfq|d=(&K@@om>qDy_D{n@UNCwqAUoGg}d>yR=O zpP7-uhtUhR7-5yOG4mm*HI#o0Sv>%32#zYcXHFmiP#{6`AR#AU>AV8ox%e`Y{6Zm| zJPu0_CisUs&G{{@7Glt+z(8~*CI_8!Qv;SaZLX%He6xdN&6+KD4wQ^3$lheNu>5H9 z5%rP+FBhrenM`GW(=4lGHE8GeHT-n5Q0J} zo~8r%9ed1s^6@8&eNIl3-a{@B=%PVal5O$L4sNZ3ZG?+sXZHttMh^=I=wYEO6htiP z%R*L;u^n@Uf)Dg5kEm3NiddG(<#F`Y5ZS=M2>#r+OJI!-YHQcrcS}Qexp>7ki&72P z>;Rm{%%Wrbe(B~_kPe`Ob1}WNtCgiclMr9@WC7G7qBqfF1&Mdk#DnlK(Q`VbP>yjZ zpv8%r4}q&(SuE`*fS&^ybEXRzx<^4BtTBGalxojBZD3prr`$=Eld8;uysIA(B!=T} zHHb?sESQnOTP>D=yC;y|&X^VY_kgfM^hcV1oT)q6IqI*Ix<`@j;`}arGmu>Ln*s<^_;%mXS z!2b@E+e(A@iCV}lO$Me7IJZ5b{6|D8FIPq3>W7S@XhtiguK0ZV-_0%mulc&d1;r65 zL4T{Ye6KC+ShKi{3@%)i%p{Xnj71zop^06Ny`KJA2W%mC9{tlS?# zMv4L&@G<+gd-C}k6FBRFS?tE3Zf(0O;x2{`ZW^a&igGEHAU@U3pAPOI*CyJz|*%nEJg{TZi z$2MXI*)44PKzOY#U86&J2&Zqt{+zKkJ>N@An1NK=+1tZ*T|`+1&suCPeE}xw zVQI`v4h7&0!Sso_Xp0M(r}|r{Mx$ebrb=YZ=p;-}SCp_5R!S}$t?l>_ zNO1}J3cK`C7kPLf$*xKe5`#jM=)pZS7C(RXY!3_!u`l6PAU5qn;@6pl;G=Dm8K)Jm zg*RoWnTKR302FKayr*hj_(E1lPmKjD=!OZtiCg{`2OWVh6^`3DKkVL@2b#QWfS6Iy z@nGBk=2G0x@rbzTY>jWCI{14oZtf3vok2q5RnqfUYB-0HwvG2@ zj-z}?6aIaZxe$m#8B3<0V}x=W>^Ys`_P&CPi&!+3&nv0UYNM$V%2zUa0RNXH_r%SK zpa1Bhop{iP0~g+vBHk5F6or}obbMoCo}APfs{IHCYsyna%ZXiYyC07sJ(*G!rb}Y* zpz-s*Q>4X#{!jSZ$iiz|_}6wB`nq2Db0yaFcS3#wHEIj}?tlLn^-PW(lhG^JiQWfL z#vG!R{&zJ&)2?jWjwM**2dECv3J~-1u-WB^91E8zdk5KO00xwunF_5uKO=Up(vd=( zK9mFhT%n=`E_N6%=2~|?eXb_5VEl=M#|2~KR@g5a=DQ8l?;<9`uzn1k4aT|i`?8~C zWQp#t#pLHEL4VyVkQ$>%-y2B58A)lVt8?nXv@yJdg+I=0oBHk2d<$HoL{q>!Nbigu bo?k4vBG|Zx;Uvdj_)BfS#=c}#WAFb1kA(g2 literal 80838 zcmb@ucR1Jm`v%+)%81N_jGIdKCK6?2lw|XzrWw_IgaO#=RP`)ZsGHOzt(k~*Lj}T%U}M1B;Eyz3#U$RM9hlkJLUv;4 z{`o9yF`*yR(+N2_YdvQj9UXZ#*RlTNNrGbVbZZ+Myo&}#MjLKi|Gu`UU*NZI(m#Iu zI1u3^{rA&6=7 zh6#I-^18`D{yH%>9^Ulfj?~F)>B^)S(PO(IAN`${pP&5Mvu6W^rer-PJY8K~_q?S) z)n=i}#%E@H%!i8BkM{pMd8eFnJ^6$f?yqz25SSBCQ{(gT@%_cf_*2UaEiEQ?W_WlQ z{;_R;HT?J6{(b^2@`O7H@;a-d6)czBOiY**nMgh+CR)w3Toxs~awX7awvCpDr?B32 zbub_6g15)c*v;R=iUXpI=@}Ut7Ai#6 zs?U}mYn?y&of0o6UXO7ynEAF&lS02&uNs=(ToZ>$@Q_F}PX1I#X9q7kiu1@hR=~zb zDKt!>{A4s}B-?EIgs zo&(R!gSNT?4holoWb)}J5`E&*Y3q~D)X2W^>IgNtSY2ck7!>rSBjGNKu!faYZmTn| zk|qnOY)FYCfde{lgqOVHWt- z`FJU5+>>=Y^}E&@mlx?6dL7ny_iijP88b zC*I{jrkg=)SED_@tXbZ4d-g7b|-1vi}W`dHZVG~{Kr*(;+(znr&ExGM3x}g$v*zFP5A9GPYD6|H{p%cs zs=QS%oOn;Sob%B5s!GG3P-s9+MTPgK>5H?6Y4G-|-TAMxTND%&uR}v$)(4X5Z_Kpv zvM9)r2OAoUaq8?hGGLEr)S#vA^JuxWpG9^wfuO?j>48l%9v&V`8=Ja`I^WQkm_W6B z!-=|!A_d0n$||O{E$gLzM^mf;ffQ?<@AO>ul?1lT&P3s06vOeh^ibq$nfJ^3`c+Ek zV6Bdv`zZm$TY*wO)A;_tUsGArcHw!XZ{pfTs{>1~v*;c>3a2(Kj&eBu{Ba-S+&SbS z#3VyS=5??F8t+XNdc_I6xL=#R3JYUJ=EKf)qm|Fn*4FFI8zM|x@)u!YmtuCzs;Dx3 z;)SlTy=timvMNov{y8pqRa4yZA{?x1Qatl^ijfaK-+lV@dU-{Kz)c17OjR9nOw5YQ zRmbYVe6ur;L(|e~d(%}WCMHhX+uLWT=AJR_&mtj#nQwSadzal|O-HlBsh6`cDJ_r& z+nA=8l0h7WOwyb}sv`Mq7k*AIu7vLSwGsQV!E&Rru#a_%`5U1&ji)?EgWeGKJCOGTM@U#Wq4Viq>4B@|;sh9cQaqCPl_C|LPw}FQ zo{a?9E%vEp$uSa9yR3;mP-ZFU%lCHG@UJNQw(9s0lc?P0U8Z_YBg{|vpZUp=bE-Pr zj+yq0C)0KzbU)l8yXK#sN$)nPPZ6>k%`4$qD03myRioWFG$1I*3tmQAT3UxQI!C_| zzkID0Cw4whIZ5%GdO63nt0dDBQL?yhN0pb-Npr`_a}&jxgoUXN_qL`oItoa#8CMR> zt9u^3BRwu+K{ZFP+||+f(A)o5LE&{&)OG%_u&|7kcd-!>KGoHCGSu=V^3c0&8W^IM zo{Bba74358Pd{HB#gmk5B>jtlVK4)We@~y`;Kv|KiJMxZn#Bf8X>DEIS(Pl!nvpX5 zT>Dim+{>I8hWXJ%s6MA6oHW4}cY&+!MwjKajT*9j(+PGJs9Ox5ITz_SzS5oRNI+v43JgejTsrCVX9y=(JSO+H7X5;Q3(-?HkOTI%mv5?}TxMB3Xi7xW z1f0?y!F|Q6{!*XFix>t4g*S<7{yJDBFegY55 z%F60GE9;CfV`f6HNrEC%CU3SmRRY8Fe@Fan)V8p92+4}`^YgL8S7Qzn$$e^O?9_)R zc28@j*ednIet$XL9I26Ye6(*N^y|kP-r)Ywv*823j8mrtAL>^RH#uh5t-mkEUI8F7 zj!`6e@HRYLEvr3FIM68GwJ-T5>4J$|O4`9JmzgoyqIuqdte<7VO?vvX)}@ri&qfw_ z^=bDbsI#$%X+-*~qjPCC>7!*Ci2%PWKOlqYpuv6yaV?JzmAS<${pr$8<&5#AqXBZ9 z8%VS-LtS8u)M`+nUZCrJ$Ov}R7XyuOwfX1Ev<%J4`TUWzC4RHxw}3U zOOjgj>Irwu<-fl4>dkm*#s+47qN^8+?0otqibMZ{LaMx?;+N7~9TqJ{BG2$_l5yz( z{3o9z+JeqG`$cA!_J5d?CL7!GhG7thy$Ul~nbv?`^$H2O2(Vh9ta#gr_lUS_ zQDZ+7q9&i9`TnlP8{_ly{u{IHHtI?0HdX0Na@gwG^`=}KR?BgCFH)omGZ)jdD{H?O zn%1xf$pxJ=T^HPbOj3E2VWos~8K<_Z(ERcFo>`4&7*BZlcwfHnthW!Q#rC-3^*S-> zo%650@Te%iNG&J-Zf8@A`r2M@s!?q(CXx|?R4tKZKC^XD$dw_s`9CdbKRdW($Udn;7f53 z5)z({mc7i|n|B#if_FfN z-Q`U~jLd#sF0vpAuG_~+#Ni~F*@g(hPYNNheyeE1HiquY)((N%z}m@T`7+M_^YE$7 zCW`dzN97rdX{o8Ak2*yRTVR1{BAd-AveD{9-=vRIkC9~+rim|PO@%Qkk;SOfsOsx} zdwWB*%B?~vw5h4dFC;`#Q#1Ah^0&2hUa#|LfiY3?!+2I0a@c5g)lmQ}`Nzu2%F9K= z`V(fhED`1Erz+Zpalh*)=%dl5^|ciP*7dcponxrtd2D86+iVM;|JD7j-n;cx`<|s7 z$1K_`Sk$6n#x8iqL(8b4an*R@T00{QY>6`AM@n0@_)2SATSL@@ z=QzsUXtAg+lL=%u55i0*C86Vs*_XqI;}hq!a07}otB?b?~PTuGNcE}bqy65zv<-)y~)I6 z7O}Z~TwJ>l{gtQJmg%0P?fq6&OMCmqOpRjZ#-~<}eKw}(8QE`l-Lh(|gOnxPoJhO) zWgleJCC%F8{OCQ?>_Ugk#1-1lorl+)TQ5+)EA7K+w*OO+7~K;7>ml9 z>X&ENdmcZWmopA8?f%3qeM1$M?Si zf`i4Clt``-)sreJDymY+E;C@IF62cTu-=o3v_oxeZCO5lK4b8y<*-26WlN9?Hu1a6 zw}htUZnxA&YE$U{9?nYE4Kh~EYMXXpqf%aS+!DLR2su;fJrb&j^1b%34IfOdpEmQV z5?u^Jf{8L|?f3Nh>yt_S+EfYl{+itLyP80wgu=bsG(2j1xYe(1X=PROHI#k=cF6rV zj1x1hF|orMrgA#l=EBLrojOhF=T0(XBq=SQWUL$wpia@@kk{6V_Wf_qV&Ut|v_vB* zY^{Z>U8gTY4f21HoawjtP@Y}bpB^GiHR;_y5gbhn=oyXSM{IY0E7~uRzP3sA!~J_` zsYukkLV9nMpdHh*(em>ZS|K5~_psqaAnzc_`9!l@_b@<$t44>N{zv)+W;|wsC*^NH zuTHj>{(^|A&q3POSbX&85~NGdOJj9x40)j!WoX51K|VoMN%w;-4^X_sg?gU8z?j$Tq%L7}LeHs@aE<>j%C zU5TlnC--^zz^H*g+e}f3!aTXT?Nb}e69O2tb}-+FrC;zp{>9t7G$tk)SIv6~)lJW2YxmJE>s3sD|G=m3VUNFHQa^&B ztVEIPqI$p2};U(>NDi+kAdPo8Jga>m{jTS6^SR zTm9nn*RNk+bUwXjX=$0CoO83F4Zr!8M&2*-UM_>%}2JMl9H+$8?nw};#R{U_TSrc z>RTNfoQ-R-6&`&T8FG2bI@i_a#wKO_k5Aq6Ikxi(8JeY+YHDiA8~uZS&xHqIfD0Ec zAoY+gzc&o+pe$`ocN&E=Sy-heD`!2FuErq(-)t?J-Xh{zE? zf^OkIQan>5V^cRONR)#_Hpo=)R-}vj7rnGWx#%zVAXr>%&z47W8JM4kLhBf@@85Hn z^jwFc`=u^9Kw|w`uk#4PfMQ8QlMB}qco4lWeuU)wmNaM1o(+xccTk*wDr0FLv_cL6%9Rk<6*IYY@Ed<&?Jg~ir^k|J{5I1_J(@d!P)sP^?>Za6|<97xWbgbbYduve^=i@2f$!yVz2;qmbouU)(LH!v@? zW>C&lKj&l2P3p9>5=?dL`3E!_U2k{){&`IlD)ja1Q=T<1g0Jw^j*X4|%rDcg_mHPW zcDAjOikTU6d3iZ=|7?4FW7W|X8*GH=**F=ph4qG5_g6L*&((arxqb@th6A?%^)vmo zYgjM`=I`Rg{E<{|q7O>}l{3j3M!7R}?BraAxJHr(YXbf&(?Dn}^6Dq}1Bub3N`vz7 zw!JS&HfHAoU~*3SRa$m-aRx#4XtbXFKt6vtrjof;ng4f+F#1VG#iJK&5Nh6YmIu9B2KBxz0p@B*HC*Tu`Wear$uH@zO{j3!p+tvO=C3vjiEb z*Q{L(7)y`-eMwG=;DI9ZD-y3L&ueRI%SN#$MCY=*>{>SOjJi`%QsTnvex3el_%%lR8pV?It_RQlxn3*>GXFU_Ug_~LM5doUdiPaoA!wu>7|2$9_x_~9iRAEUdbnq zaqgKjV_;zDbbJs+I22fjj&v0^*dmD~C8{~1gdVwfZjzSt7dr1e8*QYj541f``1?#S zNQ&RPSKZu<12i=799S2r%?z2pPFtV6*riJz3^Ea_S-}$Yz*?|e;SYnHBNbU<2Sum) z&(n3>S*k$z@@nU<&HK1-3jtfEd*El*roxO(SjI~V1r!i#R_l}E2kVVjTLS{+J;fS4 z*2cy9qq&U6mzRTY*{`f+`A&+XcRv*3vBT10&v%DY78Rqw z)a)JJ+8DN(7lUxL(;jzWUd1lzn6ucK8JnbxkJJaBDj*=>g3DH~3UX#vPfs}I0RIx_ z0EbPKHF64SSd`J}V+3VqjoUu>Y=*>ieyafAX3w!%jqaxGuyUB*;hv zQ+Q7`hSWhQ4Gj%lroaJE^rPv`+UDlH`VchnQ{MXaXG(I3Bmy;3n2c;{I#Rm` z9pEwf#2xK+xTS*Ztc(m?C|t$jZ@az@5AV&&rFqlzIxOsrkFMqJnl5aiDA{CQ?J{@Y z?Ny1f7%R!B&QfRM1Jj53jO8Fmw{0!dA|IvbyXu( z5yS}9An)$a4k=r1V6u5SeNp*=DII!LaQuE4 zJQi5v;^7_GCy$hsed68r&P#vlGDL4L5BWw#k!$JM9343F3kc|beND@aueQKRjyq6l za}CJ?xYR=A+Aizopg_aXrxg$=g?L~wT5c%P2m#&S-`~9Q`7!=7Rd2ohd!&-QzH{MX z*OT~@PfkkuYjjJ#Jn1vwV94m0SLP@0oJ8M>iWt|THx?xwO4`~Xz*mG8>ua{hi-Z6) z@8Vy2kp)>Fn0WGFiNCI0)8Ad2;CDOVZ-ehc<)K>1#>tr%o%=!lI&=1ATuh;#U+Dn` zE5~H3?U&m~+ODIFusy~xv#c$|#m_+|&~Ookx}2Jt`fFQTk&8KOI&vWgc4-+I+BZ!f z6q&51zme?j?fndM_Qssgdx(Of(yR0757fna87K5W&lyhAr#b7%GM^MC06u-}At53< zTcKs~>vEa>s>Gv5gsbZBI_7Qt{Qc*x%PSAJHCzB!m(SDaCrqKAuMGP`>7JOJj7dU5 zLe67Cj8xDNDJOu42NgvWpe8UGT`j7>`+k9=i=Wu(w>(r_H#9Vq*C=M1Jz~KOTwFqV zd2HdIET|)+Ut`8Qb+|Jo`QX8W{Oq!lk`Dz1>lwdb7eV-p3Od(SpJqfvp}A%D(Zr5Xv*yQ z?$1--!f%!v(;`D*Vq#*4ny;j!q`J44q&bq!S1a4M$)FZ~0x2G#l${*N)pwW*=Bs88 zZm2CV?q-LQRcLQ6kzClxHvciLy7RJ|eoa$TYQ1nMC}mxr^Go~9c=dNyMjR&nuOY;o z{%qU()*$cy31=d)e013%U~SHIo;^O=sd}WYe&OQ9iw7_T2FwFek;TRK#bd`aA|f-g zkrkU}B8QtqA3uIXqdc=jeRt^k#l||i$`gJuPyrYLIf{D#jp~PUi-d}&h2Ni*TD*VY z3mM*1m;6g(;}jqhRA2bJcL82r7+)G1CLx-8&@nP%GKGIzaJA>wdMLc5m|k{hk7dAY z8(xmR$uyYefJ_7LnTeZk2-7DGe-cjIE^1trqkZd@Elx*1XZ8ItMqmEbrW+N7V{4fa2B_JjB zfe5Uw)je+ub!XAiue%LmJM)*ya%l_)8WvYZ${ZFmiyf}ob5|unVSaLUHHsJZR?1e{ zLC|=1cykwsD9iEc(~xFDb30x-D5eMDBx%F2Q;*!uLl%FCd0Lkr(pS_%%@-p9r=AIC>W8|OP$?x;2}NRItjQkCGS zmx!Rbk--xyg>g0I0{pp{#SroJ!KLtrk-x%La&ec`;1PtmDkdgIg_|Ipsa_FyK z_1=YCVEN-Kq1J5INAW-?iMp29?6#x$euvMyMm9ZVtCd5{7q!r~O?u2gz3DWCF+}tS zoqz~k-k2KpT5eJ(1reR?9AMw zbwlSR^P~tV$)dl#00;?i68zZEP@0~;diCm$+1Wsa$f$X#a$tmBrK@EBB)y_Rjsq+< zV2B@w{K@0vI-H~!@}}4xbAs<%AFZ#iBT(ttaLG$FTCgQf_zF}pr|Q_hHZ{FWPrnJY zH!fh^c9G*@>oB~!94^v~_ln)2l)Z!~O?pzExzEw- zi&EtHN7m>(-Of!|kr?~XSk^d}(0YX->(5Ka$l2WpmqsXyLq{?GXL*oGb8~Yu7pyHU zpW1!a;`peXJ^?bIpw{vJ*zwxf@lj;)?yv=O0U2A-#^RfYx97JRJa_J%Y(!cT!I(rq zqLq6KH%rROreIe{NJ(KQKX`BAc=%rsB4nu8LPJYmpIP-*YBIe*KxWq5+|%C(v82A8 zk0LngmOU#evnoy0@KAJ|95!ganGW|0i$l|(P3$$H~j5ejBsi1@^T>{x6cRE z){4d6vd0JRl<7EZ3v}90_Al3D`)S2r=`-FI)!2skvTgUA-{0vG`aslhVknqopLK6c@hcmU( zM_-g`L?lABJm`fHDI7zP5Z5Ybz}%sepPE%rzzunA3a~m9uSCSKyiyMyJlm?g>M(wq zQpkY-_$TlbE&wV$5}4_mP@&wu zeY?Ev8Yd}Wa_m&l^6Dk}f06C}>pT1`*cfu)!H-yTAEzoJ_!IFpP*M)h z99-g}iq;1F3*=z=NyX@q<4t}bKgPIJKBgph9alc)6Wl^U3RKb$OrebM^F$h zJMLL;vD1a>EKgB-K2E$=w9}&!pyd2cw}Xn2QKj~m0J#H1`k<1nMOvW;JfiM!i52$6 zix&27{?V^m*xoc@kdcvbb91lp#>1EqO4mcthWH8!GILR^(DdqR2t;QJfTvJwHC7!T zS^$Uy4}$)|?s^0fi&vUV3+x-#q~Rf{69U&sA5^c&&H3&qUh{V}56H*$at_z(E=CDC zazZ8_T#h-k%#>*vzU7ZkErjhYraO2~QueC>C+r?CA0LI#JrQmSJhn2;F<{xjd*G!A z8i-!vBG4wt(Pg@MGZYj+-8!F|_V$a~?uR^auG?xsQsdjFwHDrh@S~ev+n=F`>}S{%E=5+V*w>92E5y z4vuL&2vVv^EAFS_c}yefo6rvHbUqiavd(?T=?ssK_HVzvk9+_A{Q+RaR-Fds7KV!1 z-byp9`Ul*6EB)z7H{~CzjN3yL11;@oaNEGBBF)OxW3)jwg1ROm_W)wVB-F6wZJ(Wk zy}`Yt%ok&F(_%PV=4rv-v>V98xxGp#R50xHsnXdvL|}iUsOYt{Waj1TOV7pi*b@EQ z7lQwNad5?zku#=scXuje9Tb~MKwUG!M%}3dGAxjkoLp40D(t)s z{vIh_t;|-oLUp`P3jQ}$vS@%rPm~C*h2{6Y!uM>g0Xfglm(?|^+^9G>I7%GW^?WxP zD$u(QWHeXyHQm3N4p)abjZPHEIH9Dl_1)T=zCb zRaMDX&!?wT3Rq*nmo;FjfXJ?6cLUY^pic1ptDTZz1R+B4ld<9x3-k(zeuEB$g_`UP z4Cjz#2GXF&Y|sND)+qQvE+C~t`Tj~7zx$C8{E~Xb>UKmX@BHNB5T1d#KUJ1O>m!9; zhF)qgdQ8+M8xhrVh5nRaZZn9(tYi1vTYUKC*fnB{i|`6cO-&6p-ZN2UWzuZ)@^{4N zP*_;FI}>ApR7ObM0=S;{(A(L;LG{T9+AbE4SEKtKrYY_f-k>d=KtI11`T1PHk0JWG zm$$b+68Br;MXuuGqx zQrhkXcTs}~m475b(7D7xzYd(SiTtQ#Y?&i!37d_nChwz+ezm3Vswo*6_fV+!(}@J` z$A^4CPPOjO{#tU(K>=k1>+S{KBPi#Ym|R?3a**Y(a4H0lo&t5!%bpkw51KC_C(Zz# z`c^H(OSLO$w$2$XxBH07=lGsQ-9s{Wucl!aB6VlCK2w}WS8!nDbx=MsH+TRd{~+pV zxxZ~*gDL*aQ!c$%Z!qr(@E(Yn!^PEAydG>HTX-xYIr&ElkuIAR?TuHw4`8WVLu3fIFi?RE+;_S)?p7pRrHfvNj8fH^n z_FbkG)Taf6jOm%cF=u7vFcWRGHe^vnOG9&Nu|K;J#05v;?_YI5*o_4im9{I6HB&hd zC;&YGZhip)lNFZ#!_Y-y+qEcdom1@Ke>s(}7(>+WDkNMGN{Xppgv2d_PIknvbyry9 z+9boa5nbv6kmvV|m;t-<4Gl~J%X;U|ol}Ut3V6StZcO(K4H+k=rfvxhtn@Q*fA1#w z|KJBJMWa80dj%#9{y6N-e_jW=cby`?DB!K)RBy3`_Pu-e*0h95nQH-qz0UXp{1NYr z(usFw+YC}+MBFlBwt~n-c=c+#+OZuknsiFipzdK@@Z+jnF0!Ruqc;m&q2T^VJ@=7| z6pjbrR;+O8a}X;E)q@d>Tb%Habt~C#OIYSg!%&}2ezMHr6BC`Z`rsNQ!L9pHSxH@Ww0AQ$HWutrH5wjI(-9+-X{0r>bE8(zplgrNw2IN zp=AFcQ@O6DCgE{|7}4nHDF5@ND4O7N;FSV(A1RV~%?7G9rW!~@MMc+s{)9R?^nXpV zpguEquH%Lwvue(Z{C(jq4Ltlq`TNMO2#;V~`Fmd&Gy9R;aM#M_L3MU^majN=QZG}j zcVE^Q&F-H9xCt(l+CtNQhwi@U;3r?Gvq3V_EO#ITq5u&Z!83z|=0~{@lmV>PH8-aZ zt~CAY+WLsNwon|TP%W=zyB`MTJ5P71o^0D2i+Yc-5JkuEF-mXjM-F|1ShiNh_>UhL zpu99*b*J3lUM8wwrL8q=RENU=A$E6vUmxn*k9t3UG(j2d+gpBJ356jlbr#wB^I;|z zJ4p0txwwcx{f-?mvM0w;2#$;j&12=|`Ga+PmAh_1F$9u;<6-)3m8RkElC--G)Pagh zN>c*ua_%VgT)lIv?ko!}+K~tVg9?~$KRsH}ju3+u4_W#YWa(8@m~p8D-{$YXeV41l z9;M4&RH<^$>d{#v^p~Kwuv5=^@Q|wS3x!4*FWM;RC3D@+E-$A9BI$;S$-vcm`X6-S z4Ib>a#@rMRj*hg~ulwydc9H;}06F2z!-o%_a#J+@O|Jb8`(D)J#fb=mO{)FuX8yMc z_Qi|SMVzEa4*9h)Ym@xYq(Kan$VzNh(_YP8>zJ*_zXbE`y-r46cqgX;{E@!BRPy!G zkhq91cpKQ+ZL2mgf=Q!{Mc_MKw9KF?QvR_&Us6R7G)TZ#-F9hBOijDW15HmMt0mGKSEs~Gt!4T*!k#{_$refFI(}VEhfWUbd zt2ncZpRw9DsJ{L?2Efb~S&Y4!jdOmrqs<8Xy0zI@B`Oas`16z-@KdAI(&kD@NhZuL zV3Ty%9yB5(BJzYXAGq4_a22f@P=m2NYiRgU5R$+rs~Ff1^A1p}tGn9@Br{Q~!#z9T zGt}*h6F+|JfEf1QD^Z_}1>Bef>{5BXDDO15a#92~RE`+8gR-B#9Um;Q=E%d*h$Hgn>4SB-@ThyDz7-OOX$}I z`_+{(3@Oc!MN>|%_c({cZrDPeejmjQHZR#&enL=J!up=9Hh2)sr)9;)QiA*ez%75U zohMp$ZEI`V+~!-`TtHypT`Mb&RSsjkOl6!;3WJlCL$|{2Fa3*@-d4<`tBM^byvYE# zi>PL`zrW=Rf%4l?YJBKIRO|Bbt%bpi#RXQ-awuB8Q5siTz3H(i zL{>T>K!9$p&|8mLLxCgrQmx4BGI-7cft;=G?^jX8y?UDxPy^x%D^Sl&vIDw92%WYF z)DdEW?Tx3Rpa{6kW#}gn*%4yE87&LW>7rY}hmimFtATrKWNgR<%$}`#FTm0W6#-uC zu>PA|0;`k@V7u5@x5FM8sw}-D9Ak$XF=l3O5t*q)PmAkBwOz(hQtEPH49m;fCMd|2 zSL!XfvWm7_9G{x*y-?;H|(5wL}cYm2kRx4|Fxdt)E=+2*of%ms| z$5wvwir|Z`PmZaUfbruRecJj;7ad69p{~sx#`+0q(oQgQ{k^0fyri!v1a|*!WgE^DT+)`4q|~_Nf|3C$`3%KETgCNr?3oGPEthTMl2L_P}Fc! z$mPeI^2TsH`9_SK+qY=1fC1YlV_h0Yc}XlLcfP8S>~bX4=7kbn`9q9}`Uyx&m+~## z!)tJS0;r(%yXLrb|3i^O40m^TFfQnJC(Feeo3tW0cV5MIclv|fdp$q0t5Y3)4YlFK zRAA@IP`a(D@7f+(WDBkesgv3n_Uq$h*&3kuGXrEFJdkj45t^Kw#1MzS;Rs}oZh$X= z-F45lX#unW2g`&-I3$Si6^QkVz=MLur2~Nxl$;;SU+-rHL`eMF6yQ%BPRF;*IUV^2Xa3VgYA!< z96hTl0gI}p<`04jIk>H6Hu)uPPchu{dd55;_McuEkY+Mgo;pv|o`dN}IID~dS$QDL z=%GY}DuZPOl#`DZW0hgOy`fm>WO}z120A*i*Z14w0*OK8d%zEgkodwmm;_{_PXKrm zS0dS;juPt;$5ff!b<;lg+(jXvDS#4jaLoH$0;n^PQdZ)UN?A8UJYnODMcg3{4zq zOh?ov-y!1GF6fxB2}mhL3jbvTmXoilVx18tqX_YILUu28iy!%M>Zt>hDx+IxBbkd&eU(XS( zeJyj6Lg!9^dL;M+wm%03oqGlo57{B) z?oC)DKJB-~yNJ;j+(tZL^jVRUk(pY?HoVbG3}Wv0uHKH0Q<9RB#3UrSZpZU(rR02c zSEg1co`?ib+vP{s{5*H=YpMRzb&DaV%ycvW1Pw~Z(L~9Mkm+!EwP5w0274!;2A?|` zACJ8fOg8!n^UU8N6*6m<5CF|Lxs`HN+6n9nmQR>Faz792a~HKdME2??q0Fm1rIoGC z&4OPu!P}~jVcyY^Z4@}}Mups%K=MJjcy7+(9WPYo?by+0S_Jma?8cNwi8&w$)-(Xk zOHi0gqgZkxg1^6IkBISewt}4tmza=sI1TIYTh{}eC>6OzgW66HG}WK5RAs0fR>nLI z6<}%cEYivsFCTS3c0~v+sG>cB!6tF1!Q<4m&cg;V$k`sAo(PbBw0Mb0uLox81>cwp z5wM&Hs|Bueh6I_kbvhI>oVQSf(xGbaW}p?UALmT$T+HEg5vU9p3r^dcxndQdq+;Iy zk3TV3WWK{PuW0y`_4xCH1PBNos$2KqkrPfK-r)5{YB;~3AmT#S1Ud;6DAkZye8B-M zdDYdxE}M{J0osP7;CNurKKVT`g2XHn6i)=TGmf!iYDs!kpzC?(HCOADIXgT1@{;fR zv@;=Pt(CqH^+gjq$3rElYar)3geW=xCM_}e{a3Veb$DZd<-?)!4io1NARR;gffhi} zC+|U*-r^2fUT%)nlmvo-04qGn^lf*53f6!b+wzi{MlRBd1FcFl0s?==4jf*B`|%MX zZ-R07k%EE;&@P>e|7+^gvj#HA%dH#;BPd;oERN9>y<5Fu9Zwb=Sk&?`U>p*1a(I>d zE4QE!v!C-4N}#|&>}-&|f}mC%)&HXW_jY^qCby%^-U9fb1b9EBjvK9T7SEJP@sm?= zbQGX=+tpnft+)aem?!kv^kr)J0v7=%UU5ns!ZPsYK=pt#!wc)?Xl$j0)wI45pp? zXRmtHQe$12U%0LC_%X-R4w|06K19%gIvMdqON3AdgQuU0I=`Fl1Qfnsb zoUKh#ayf}di+bdkozX@)M_&XpaJ65x>lM*wb3WW$|CZiTH&m4+_UsAkri8Fqn|t6| zbK|}2K)mggzZJCk1+Oe{D}eKFbhUy9jt9`3_Xx8=HLLFKCPJzo;D5d~H|N^SJ`mbp z$_Fg-1*mUm>v>A~T`E$RaZ2t_a{VxTQz+?!X|~D5p8^i2KF7849)wz5&}}-VwAa!^ zdD(@oNDBiBKPli;I(U=wY}WtV>e(zVA?ym+x5Fw>D;0bw-+6#rD?TJFm72n^|A& zCDvX1c3oOBY7gsy?W1}VurQl*?I7e`@G1gKF#Vt?pbhEm~pv}#5;d) z7B6b65WCxgmNg{uI65F_u$STQ6c>&$FF`%Ol1{HoSGI(|vamWi^yPRWxGvCApSF>n|FQ4Wjnj0I&4`1;=U1cZ zF7%He8sd@>nB@`*3JSb)U&qD{xBS=CTZTG=i0O!!F+i!W12t`^ReNVPZreJP#U^{u z%tw>85o{qMqo)1?rk|oY^bh@aBKlK_dt27!-iW#Q{hG2!-Gz)L$hKuhP*_ z-c{~S;*193sDNeTx6ZcBTLmp<|I>^3+ei=tq(hv;zo4FR2~kG zk1o>mX+15C?BX9^LxGPb9|b3q@>odbA95dhX?S8<5zVbH3)RfzUTDM&2qV|&IBP}= zd>6pl;e!J1ez1-O`{b*$Ff`jAy9GM&E(|6m|7)Z8^yw3r=PrZ);_knVLDuOzht+2< zjstxJXazckC|A!Vr$ZU?QM=0Rw;Z};?&gpBleK z{DbkA)fdD|@;WJ39yD5TFRd35%Q1Pj4h@wxqrbFNyqSZs!>2~b z*?#c?enl+d4iG{lH%`|Xjq=;f;DZ01r5`*%zM8C(Agamz{S4Y4qx&0C@YQ+w9x=?@Lc^)u` z=w;u4CUIC?tmQ2;F&D;3ItxD(1XJ+ECm7e)B2EjWXax@|(zB_^6t3e*mt50FsIU9~ zr|N;0Z%yb06aVwuX|3j}iy()S9%4?0=^;bTD@8)~%~dBW^h zkqmb$e29~yEa=ZazYZi^yAwqA6U%Q&JQ$C_J}B8CO4zNl=$8w~tmE^;tDrrv$K{~E z0dInQi3mqxl@tP5$<+7swT& zR^Zf4N=hnl8Z+CFaCNPio;nX&xWn<`POeVP8FpFyx@8dW)X=8O=v3N^I5>6Ce8(c9 z^0~VPHVNaK)cPvZzgPY$YmoP~IEUK2@7&j~W5@7W6qO&rZlYmh%N`NxM>Tj1m}8nh=`xDW!+ z3N|k87bwF3!Z0$4iHRW=6MlaFahOZHy2-7g$bv!kZZcdBe!{IzNg-wF`Ef z3vg2L05rjlL0Zo}&Id$cYDflqBLd<7tAZb%Z+L&MsYYv(!Ej(E7~D>X2*$@p1{n$B zTPE+YIm-8c*$Xue%8DwB>8D=PU|V&g8pI@j#T4jY!z{6r<3_RTp2^ZIrHlIDXPjf#quOCos0u;_Q0rj8!3QPa5r@H70+?nU7#4gp z?19rZDI3@+Ex@{n1?;jXv@}a3)<8|l0Zv_Z*~TDmAe#WBP5zv2h6n6I@jo#;YqT|1 zxK*J^a>Ikh>!JN+9I7T8AYqa2_WSLOhD*7y{e#_?ZfF7Fc+zJ0loNO5kO7${IDQ41 zMuvuZkW&#`07S#SXLx?#G_(tx$z&M>TIz}CQ&Ux|l?%ZITME~TDc6zGO;=OXO zU0GW;1*g76KSZpuZ9qh=Cr>;Gnp#@!0j%}KiXpHA1Xu9+CY%=Q((+yd>-jDQu=3#q zfLNkdp#t(f%sp)0V7t(tV3YzoyF$+Uk~T^GF<6yysC>ci0wzsN=ov#Y0JO`D14fK})%duocf8|bcu&3^ofd>% zG}#T|MZ0@Q@CET5d^m7@0QA|yeHtEgP>xD}%Ih6*7@{x}>*0aYtq=X@<{7nKa4AEF zRCQV0t1pXiXU*E$+Uty5nqG%YwR}v_LCbl}HHn}Me9|0o{-bemJ^zp2T@hkmA0brQ z`uYU7jQiZW0UQE z%9)v&TF_r1P)1~54wgWodT;NN2)ct>lLBX(G`oO%LYV0OmKqdL;6i*vfukq>ExzAW zP6Yu3T+7}P&XNaGy{fNG%E5eX35`My4i42LBUA|S0X8o2dN2%3tgIjnDa|WQE_};H z6u!Sr(4yZ2zQvgY3^<=Ex=A`bGQt7z4@_d;W!WMdJSysCTBOweu0&!ME;&EewScfY z)%#Wi&Ia(N&`}eD@Jaz-YlChOs^{GWL>RPgNpXoO$=Fz|PBDmVvp!irH&!Kr*fb5A zE&-gkbc%-#NtiV~iEn?GZ(yrbd_xU)0Q4v+^*XfKbZbXKtz5IO9Vocb{|WR>9WWLa z=)t{Ok7%YT#d*Y4Z3~Ny!KJNBA#w)kjWYXQa3110xc?*~SKAHrELn?4wJ{>~7JV7` zos&s1JqKsdUKcLoblus6UdZ@sm$=MbA4s@ZY%I4q?PHx3dgz`3!}rVPOJ)V+ksX$ z3))NCX!{ibmqH(e9k^cr_HPdQY?|tM92@|U;L0hw|B&$w?X6p7gZ*y16Iki@wXpBE zkDm0}A$2xqbjIbKM)~V#Xq4?+z#oO;A5b1KCB(MOmD($?^Wl04siM^J-`gJi3fr2G z8Rgy?r2Yazq}AyqWcN0=W0h{(jH8e3j9O;4AnZ?cN?xr8VjHo}0Lk#>%NHoB!rzeK z$o&;UtNzoY^lLzF|r{tc}zF>MJ2fm`g+f>}t*_DL*-K|vqitvKfu zfl>EpP1?xjT-W{QC(0cfB*2?04*j*t{Vz_RB_JW`o#grLF$Bs3JhFG?5kn!=d&(or z;3NWosgfsm>vx=i0^;MluCLt>MS_tlB#z3ez{Fr6j=zas;eswWQEBN5j1S{*!B~rM zBCy}Y&CD`%8g(Uuz?x)U%F4o0-^^AO1T^&b%~25?rh1j3=8ShZ=JR3yVP$}givUNY zS4VC^Pc&6gZ}N*jHa7O_0#;`}QZGMY3Y^UOzt#MmQ3~J>AyU=5+HVd#rbX^HlR`{i zX*YrgYE?mVj5@Zy4gIuHw-_#NBp3a#RBdj(m}+E->OVvxKXQRvQez(}k7{rya+OQQ z*Ozc((!z!vRTo3=i519G2c(s1qzffZBlh z!1G_#zRc?D@4GR8oJ~pQ)=MYB87$t65}+*}LfQtwuwQI3)&L4|F1T-FM)!?GKk<{B z9AX6h$JG~L223*<4z>qNB1Fv^2({wgfN7vt;mM%4%D0oJ7Jb*RsjnB`M8nL0L#7gu zwPD94r4wpghKiPEKjJhVo&hrmKbs4^IFPojig(jxSb(%iC(s8Vw z9C}Tv%Sg>;93AGwl((jwa>H0X;;-pW&&wtZD8;a#DH7TBhS1U%TrarTX|4yTYP}8& z8kPucX6M@9+B-N}YowGk)H&-s;GC`IUVc2l#lO-n)b12#B%HskUUgm}QtRPNte*i2 zMLW>op^%Dn5Qm0^>2=fA--8VcUKO|~$G^9pcg_)d{XTrCUMRGv{Dld(rw|%+*lhnl zoV^D)&~4j4-qet&tc*mc%$6NRNNJIfJqnrGI}JierKpTTl4NJEWK|-{-jb1-%E)yP7?-tHzII7S2%>F3jg{y%v$SeP^@! z;~bVaztR1NB2Q&qsb#EV)y8(?1l*{rxA!_BQlV4tJGUmMpvZG7OWcjcc@tYzf{dFM ztEFoC_=OXZ0V}QhQxO-0xU@0+mr|J_&Xz;jKIQGos}_8y+?rc!CQ#-eLXIGD78VJQ z0smZvLK#cOdnUM|2V2kLr8@Riv6AW?V)*iHf%~sMe!NvD#H5C^&fYL`&N+Vum$e~X zfc>*Sf~xjHS;ednpk!`u(UwDp(f~JZVreN4Y*F5y@e2Bps*#{X^-i6TTNhOfyC7e~ zI=`Zm#1JN++$Z~Fz#xcnMT>f}h!09rt83S&AY~U0kBjd-_*}qvO|OjSKx$G&WhK@2 z6Jed&erYZLJf2c{62(B&YS^eW-A6zmp@XO&ocScem~#FQe-yoneogMZ#?(l95#AYx z(yO-~=e%jan^PFdY5cORMu^^1%11#`_@)X1FRo?p9e^*EXtPE&!rFA)`Ve67n(9f} z4&j^=;o>WOWj}wL`C_~HL!Jo~u-l)gy(b`?eOZ{ke`{3EGlA!dOGKju3Vy8flIfyQ zHiXFlr)~+Tna4MXP82Bvl0oaG-Rw4P6w>yF7LjbAb{lUW2^ffekHCRW3 zuKVX_SUry>va8ro&0IR4X?msi=yS!@|Kkt-Vj~6uxpXGKCHndEwQIei)Q;SciCoQw zD-I1)R#Lihc#HE2;83cM!hf3)tZnwJK=JI*FFY~&G*IT0wn_-iMR~IFpD|NX((}E7 zYl^P{ojfr!L!NTZ`FMhAG$=h2b8}ixrJQba@R~r<@y?|+H5-`6edI!_ALoRfR6B8E z{lLJ0Q^QA1ZCInxK*RpEgP)&{7M^==6&^VNP)T=ay<|2>;U#2<_4o-E97LSh_wV2J zb});us;#om1X^;C65$epL3+WlHMNu7UX?1Ogk zfsyX<>OB=RkWk6l@>tJ3FB<4Le{|HK>gU=#;f!?^9Z9d#c@x40cmxFx7hak}nRI9U zWS)7`9-<9|lV{W2e5@KJ5qgBN1&|ah8~306O2qn_W>lG)H$gHVaJF9Eebn*lHPv{s ziIdD6Y$!FWRz=F#i#D)6eWvMXtuW33JVViTQrvp2Fkpoc%0+8gdxDIaJEO#X(*)}f|(1>`4RzM2Lv{o z7pOh6kZvtBrQyjos#AZKeZC~#@ZH6Eb4uuKTsJZAa#ZDdZ!}_eFC>J#A;6XQ&xGw_ z3Lvl!>I4(RNWnX`bMo0P<2>kUjeqr6|N7oD_1RBw7dl18b(1Wd`}eZ|JE8Me%Gtys z_3O(f*~5no!2zk~Ii>VpyLKuP@3jF<@vV@M^4#F|fsK1#rW}mCwLEV3yC&Nh8vJd= z24Lo7H$#2Gv44N-cX8ZHzAqK|NP~2p0%$Jm83b1oH5Ct#P~8u%s0?G%x^h&||b@ zq8!fKJ$C&JL>h@}rYWL(a<*n}?)vmjOgDw(!-ASIM7m~h15*2lM!Q+PKb~{EbE`(O z-co|~UZ{?%n)k>-|Ri+opm7|GoutF|Pp|7B;rCHwRj|dFxtEP-e-Z=+^w%JG-;o(PZy!b7t9xU z=zgUU(RIMh`ZA?j?Z`lp^h^A!#~$oi38z&VP;?OlNBoeHFPx2wdPcz6G}tN^&A4T~}OP zCZo$0w`x@liM|{exrs0WJs6Gk?ze7uY%667FX68hKm zpayWb(Odj=k>a0v@B?726`<5lxdmwl+Pn6@Pk}f*=>bh1CZ1$Y=M4qN{EF^;k!$2! zU=p$Fcsb3ydtiXlwXK6l_!^RQ%dwtmn3)HmfGyH1ixRsxC7gkdY1oJ+B*05M*MXgf zXD#&kMes1JzK)~5>TA_j7ZfAA^JaY`(2ml#+3T#sOdHi7LmfbF~^=4c)?I|nT-6jcHV*mmxkthRZ)XLyogh< zEd%KI<0;f*Y*z0K8(9~HM3YW1W*IKS@PL#OeFhRAr8j#8B*JX`8Hs;`-?EXG^9qr{ zvj4hPWYZd8)qs1o4_TQ~jYt7$90fS9oj&|kemucx>Zhv_kZ`}yQDEd{EBn!qZA0hd zp;KpslXZu;5WRz&Zs4i6>FZmwE9c^9h8sxThE~Nq`)R<+o7TP3oGRoPUyWlNNmGz; z08@dUmjT5^IS?;760p)WIOvC32okQb2t(}bnYS3D6)JbCsCC%qKFBXz4RQ6;~zgmnmC!gw-^8z91rC;$YCw5VtJgFw%a~?5EF2*cKv0Me9o} z^zn1@B`@M*CrktVh*$s~8CVgxq@_Fj8Y zdtukVA|86W|LBn;(l$1GtaB7zHb9s_(#sGlz{1bZPXq)yIuZT$<7GO)V6kk1b(b>; z>b##xa+UlgRNc|RcInb3yV7M|GFv&zb|~ADOub5ZxA6|avHAI%v5~%K8s1WFPoBL< z8_cS4WAvnl_w-Yjn!!DLjbzytSj5!QYVgQL<-C)Xn0Q^Z%}I6feF+Xj<82yh4i3UH zhYs;KFa?wivDpoX@h~tQ(*VSDF3W0iSa2@IsgO`QL&I&O4$ilpKIMj80rX={lNk)*1X>|+rSc%sXtS5 z>Sq5Yvs3Q557Ww)B{Z>I`~Kn6l&~%3rKVARYz+@E z(Y|TQ2l4Bn7-bk>Ndm=H8J>GGaVpJuR*@}=fZIS5svb_b)9IbhstceSQQ(8$BIKj5 zfGvaW4k;HaOJSxUQ5Q8P;;oJv8ccwood5k@MGowFa9rKPlvUtN$m7VkE59$V*q5?A zMXzK3myYVFx7D79ymqQjb_mLidOx|D)c&t$x5b8_efwy! zk`E!Sb;G6pXJav^c7Xh=L|u9)_7l=-9J8zf6(eq3KGGT9qlWG6tI1h}b(5_I^UJN_Gb(4#+2@qz8}93id|S&kv@gxtqvu8Iy zeE4t|I`d}ri^=)xS;cF2YR}Dp%qDx~y?Y&b22Ouz0qy~2Z_Kn}L&?td*H7$lhUfVr zN~#+J15)`3OPeEk={-liu|e}4VDX|95qyRCk2l%HjXUNtx6a(%J5a7x>H1xaucE zlMn%Vw{ZWQ zxgmmKbkZ`gxmg3Q=-eE*4~9l+dF69lELDakY%*}AiDn)dpJNm3cRgUNtz&e3@~7F8 z_St=-wsBBF+aPJFNhLR*Nu_-7KR=pu60ov>byL#RQ&W^L+95vEcVb z{Ok9jeh2JKI3PsL?jRA^s`10^lZU7!J@Fb56$1nCw+KBKMR2W%R)A*Z*o*uy3%Buf zB!WCEe=2CUi|dQH3|B+4<#;|AF*b`lNHvrz)1Z&sEl!Ve7RrpLo?3hwUq?~YHh&u37* za_X%RB`VX5M@MxTwtlJq{bwS~6F<{{xZ;6D z5YGqb%Y8@YJkSZ9Qd29RxxZ1f)ki0?c(#d-m5DN2tg`x?NYkvyVh<7c_fy%d0Uq6$ zg-8;(8SuO9g}u>e3|}+B-3Onyhc0SzW~WoS$}@^7lI34fubCP(83U?8K4xsgbD!uHrZj52TSQ}vRlE`XJ(2Z z9mJ_HwmnKYj$}e1UBzJdyp`MA9-G#j@xruwfyi}2W!i2iCjt7&K_qmeMytto-fjWm zvf5WB`?^1R)o&?1^aojBM=SjEr+V28PT78**jpOQs~;X`u{)D?n@NPIClxaC1pe4{_m^N9rJ2KA_NVQynzA7=+gMi zp_WW)@_#KY1+cA{3&fapT*!(ko!H>&_OZ5hMS`lCt;jjJXR(qEhU=Paq~WUsn+XnS z%?-o=AW15BlK)9ok^TNJf8#B;AD&i7Ap4D5W9@&xJY?C4ac*2ggw-Lsmp0>My`{jZ zTHDZ&=8yq%d)KOS?`oP_{=S)mf^UsFUm{?eNsqn;1 za4cajrAq8(|7U}*4U1}!P@_6%COrT3X1+oI^PeSuHAq|&l1?4>@iP@wQy}zUHM`w2 zmysci!qmQ{2{CZVMwLt}R;@AwwHjprc_+DA{AHiXL&j+#_ctiFUcAeORAuW!rv4m4 zu`gRH&zdetnPE>4`9@Q$^+D-UJ2uTrw-i0h-tgfi+?9Jer z5q)8k8FoDO6KR>yoh~{LSy=dZX6NQe>=RgSNUDl{=^I9`F$-4f&QC^$?zCiZp>ADw zXXmjAs3C7KYnA`Cx`9H)iOD57CNdqw0W!?BzhqZ~ttXp}2Nq^GK@N%6K!A~5uv&rT2u~LPQBTYSWI_mvn^E7i*e5YD zT>&EPuYiSOdclfKEKCCd>bc6^o4c*l^XIDu=^Pf08y6Kd4RINTNgh$!LEH8FIf-gg zZFM+cC+u329kGj)U{Pj#=ZuU<@@byOuL(Hgq>YS>GQ;6$M*X?qP9PCv4)O`6W`@Igo3jwKa!$F1=(TFDu7^@!vp;vJ;I~EFFxXBMUKvP6RL-R`fNCFa2k#U(C7PZ^BiX{(m@?qcm{fOgI-*LSV(bP!6}>5Kde} zO?~*>InES0iGP0rGNx3o>ZwV1pUoEq)D8QDg<<$w2a?$dTUSkeJ+~-%Bfjn@WMLr9 zK4=%s&Y#gi3?dihX63(>+<_L}Iiy#$L^jNK9 zD1APYh@tWEbaAC{#y+=9&d_^AL?U4IAxR{?_}=nXiMra^mz;FG5d&@owrg5|@rSX1jVGr%yQvH3wF1?2c@7=1=6zSO zPSTX`mZ{+X*0zFnenLO|rv~6G-(mc2CkmX#sV*SN81ks3?gXY`NI%kofub!efu*lwDuF27^zt_Z~}nRm7QJSx7g1Gu?aQ>)5Ay@!WG^ zIV~2h>E*;Q2qcXVwIt(AwiF7`Kc?KzE310?Ae|}zJgSluJ8t4A5%V*9cE5~FQS%rKgu`67$_w;sM;k`)KK5O^s`Xv@AV}K=4r!h3=-D?&MJo4KB&Vp);niZL8+PC5 zrR}O|Y3_yKmgJ7zdi2O@JR9*Yf(26?7JNS=|4p!fT}{pg0ePRf5(*Wy8q5I?S5apWnEdyVvn4@18v$N7lFFVL-2P z6*0NxBLaEwNFv$8#wQ=cvaSQuc!iG=P*4d}Xft`wI)5L)of5H_Fy`RW_K8u>cI`Ek zO$bp!g|d93?+T)b9%)aXduE{fO3oq;i)!lEFVg!0u@pcOVKSIDK|b zX{tWTg}@JCtjBLnaM=IZEs_JsVk0PYE@Pmkyn`IR6uex66<{$%7V|Ta`!VIn{qJZKfzLP?cI0bHy@eAD0@k^8d&6; zB&_TLD{yFHQL4JO?`?qBOvj_y*Y@wj&#ZC3HhzgN{401384V2$?@5Rtz|w&Hh76u( z2eD5)IA)ZV3qFPdF{j?b^oWSN0+yo)q!{7`@6w?FSkKS%XX|%ij@EJRp@WC1#U>vQ zhUDu2UqrB|(@1t7ae`yFttg4h%3|Eaee4w^^M0>hy;|R(RkFkQ!%h-AMMyg$6TsXJ z6mun^NWvz=0dVSm7+9GxVGv(|1~aqc(jnw&qr2IKa2%3{VW16WIr{lc}im*zv-u*|$x#HLk5NYGF<`*P&aN(5v$m)lR;pj@ZWV6RR-rtE(W_b?Abli4}pnshEYU z=_qN}#+3gQmY+j8?*uOge}iED&yBF5-_XpoEP{6kry?Yt1cAjdQM7B4iIOPIV3EbiG%P+;uZWRd8h+yN%ft~oU*q@puh8+T>Om7uaKq+iaRJBCHJD1GeW1P@CllH3 zUg&591k$TYyL@gR@cbM_ua*1pXpoAC9faIaii&-iZ`?-@0*IHPt>kHvsY{Gv|6!yK za3d9WGLEgjwzd;cY`PW$J^e&B+xKt+Yl`4GfFvr$*9HI(T=8q-R|*cMhwNNKRRE6+ ze~t>b=-i%2ETo8th~UQg&h%}zF?+w7cu@et>)^tB_I-yTHq#*NUl$BP)JjQz7yxj6stF3fL$8{#;IZ z$|1*OXLtS#_tV}BvmY-{b|k)H3lSG+i#~FLOz_b43Fi2#gM8f7S=n442zji_1-%UvOEFUHE!K#8nf;R;D z>43$MF3@IbYmA&&2*JV2fC@Xraa+CJ_1nX;_V&d*S9SIKl^^C2{q+sV=ndpNSl820 za#r~&)Ys8LCxE~WLTW#PhWdk! zX;f$EEbfa=i$4sle3rD=U}1!UMZ#_sKflq?O#0G=?9r0d51&lc5EVsg$Tqt_DvOI7 zq6M_FmcSbZvuNvgpD!pD$XBeJHSoKb;n4Z$LFnk9 z=6ZzyC%zN^Ey-1>VRfe-#|fy znmlw85}5!zxlOR7mC4u!5x$Xq#%|NQM5biu2c$IA&yS1Pr^~Z6$Ct--2Q zyctT%qt$Pqd4JrKZdB7sM$G!BeXd8vdBaEu8-YO_B7*C5JbgmoO?~i~-)8E%X2W9d z>+Q#QUO04&Ov3=Ps+z&T1@RSY;%IT)kNzI}Uav3o_24SchUPl2#HlV;0x*wn708R~2a zNH?+E(=wY|CLh$pc=X{D@rIr^r`flBneUZ09<^>$&$8)Ri_xFoz@zxI>&SQt)9;}D z&JL|Yc(vqM$tHl!hfbf~MDje5S>db0P~2)ZF^f?>tJkc#lA9|rKap9e55u9;KwNBp z9L=&%|Ll;9nw3UoSs)KC`4N*#^a9~s4Xvs@b8+jLki9ExBRPb%HHB-NCFOr~D~#N% z$tz4bg|UV37K~0Ip*=3&srnCGNhtN`c+jU%od%!g0OCz#m}yO@5DjYTHlsE{=eQTl zM|w!3-EHyh#MDCih?SAl98xy}qH|nUQT0~E#OJ4+f_DpKE8Jh#9gkO;3jQtkP;s<} zry7>86<{#89u0xgk8xkDua>^!CL$7N8@g>JHkj zt>XeKWn+h4Q+6Lcz+z7_K7q~s=Z1n`z05c>i+yjz*yLZl;3My9JtDvsao^7OVlm;6E)t{QvxI~m?VwXOgiTcXEn)F7;ag3$ zTePKXdFBSG1eVZ-hQ|F9qtIN0Nwjc?6RvCE^NEIQp&}Uvs6#_Tc}=yoNUi%N=;UXd z15?Or-oVN_eCjWdQZhgZehMOE7q)8m#}q~q8He5o)eMGx1V?kVbf2Cfvm8JWjS-vz z@$*D0#eVN7=|u@4&4z%%N9FAV7|=yL`KXw(0ti_m*I9g`QC57gwthy%aXmgho{nfd zp8SVmB_-_Zd%D8WLW>I=dCaO;^7dBldihZ4OwIM-R=!zb;@1v(!&th_cdlot^ z!bC7W9W0Z9>;z8)c73Dw_m}$0E`xOpkDHt{`tB-w)Kb(ihxNdLN0TgX)j-fb6FB@e zRj7ek+zyWX-RrL5;LXF3J>pM<=W7hl^GD7YuLbTgDmnSqSYPH9)gRH%}`Qw~ry$nc6YvA4bgKL7;Q z;C2r&qh9h7%D=$3AD?;fAVkhG9Jep)=UDQg@P4m+xxA!AZ@4);U~U?Yb?!+4YN zBcfqp4L$+DJ#Hc@he#aQsSXR#H?#R+T_3*50%HH+Y1w$*BtC}tK=&J5Z~eZd^U>2$ z(aH8hEO1-2LBf9E?wO%YYhR}5b!Ue{lfAlrhdD`LhSBk|{>X4TxK1Bh_UJp)l(8II!ARNlmw@qFxK}8tzf`>2THO zO*EV3wZux0hr_`{`NTd26m9DH3X%nY&+YYZ8~!Uqe2Eq|41`+jdg;*0dG13Z1te_x z0JvfiIlCqYNv?dM>bIZ#;m@HWT7eP>@Rfe)4LS%lctt|^&R)gs6C)Zd>8mhsVE?XT z4FO&#w=l05zN~dj`<{K8`Ev)&%o=X|EhgEPd(-vj+p|r~Eojpd3sM<;ZS()M{j5@% zadB%fGi2z;nE`XMNt$umgww{m>z3gYwTuNe#jqNEK4Fbn~2- zKH8!!r^Y8brbR;Y{s4n@eNO>ZT6xScTWvoCuH#CT!$9rM{c}G*sh%K}1olph6ug%< zV}4<`VcqA@)%UcDr}`4R64WZj2JY`6PxN#D;H_};FDm3(8UV0Z!+HJL4w9hfe&n#e z17V>O(p28(y!YSyOXTHL|K#~MycOHzL!yV}K5GS{PS(k1LW0Dbii&GRddV+3o3pI9 z2|mpE2=;}hMxFR%F*xR&+|i>qwg$YGZ$J}2hIMW~)k^vn+<91g{M(YwZ&zBJ7KYd6 zZFFP(bjWHeG&&)Q;sQmH(kHWWsxVd(yJl;Sz2A<-VqYsmTO zB8g+VuIsi@!*EL_LaVn*Hz3K4jGp~$2caZ(txd6hDhHnY-a^&@Ij^gm)Os!;9c9D- zVcOQGDYx7vw&KtFU$xceM%AB*Ns|3?Wl||7>2-Lp1d$au^v(0QxTaj;)wZy(faDu< z2+NUnx#B;6DNbf2;hR$GXzcZ&hHZ`ETt-e!jx^p?|L;_YXu8ATg=tc2SSr z81++~IW`P|SA)oAQ9S!BP3&GG6ixSo%C16(jGdZ^ znc2C<`T)K$MoE{KF`t@1-#`k0QIIaKw+Fmc7>G=gQ`*!&Drc%Yx+BE8UY$m{a$+lI zt+{;K2D<6BL+_ie+x>d5Ypz?lOa)Hf)KR{0npex*U@}$ z)KnjA`0pKsNZg`5vvEl7Ih!)bZL;YQp8Yem09MlTrY)YH50ATUqrSbWqx?oOTVz38 z#EwOtANH!>N`o+YHHc`i(!jcf>kMw(Yml-waLG=vCsVum>5b=O+X5< zZSZJt&$Q*BHqk=J2i<1;FPC?;0kk+&YV~H|ktHVHy?y(&+NbLdxH}AM(nu84&hbR9 zcuPKaDfJOn-L}69zr_lAkc6b8^mS^G)*w>zt`8b;oc27gP*6@%T9F zCNbUpjp`^>y^e9G#aE!5966D1ARArt3T}#h6E3$BhkDGr6_F45TgA>o7cKm@@cQ?Y zF+I~xW4mX=#y8>YDh*}$R_ZH6cE%~C@#O;}^+-ce*>~44`e(K18jLxD5mq9>ioC;|1?% zgS$g_Xvf}J1P^+IYj|J%?$&Bq5OCgGs)VbJ3sF3rk0dWAoo8NzyGBQKFGDs}ZEiAh zu~N=r+eD+HDIq7jwoW{(+&~`VKPrWlD_3G46Lp{72cz96nOJ}X9ylcT|6kM+d`zxw z)Xc7HoZU#i3>;T+`?4zmH@1tya zy-^t(T!*;QDXIrARC3e*|IvXA<=}E*$fen`r9Dm;k~oClt|t>Z1s9&4@|2%3l!i{_ zMX)DwRvAFq<Z^lL*o<5@S*@sNHLGv#to!{2pFKJe)wdCe`B}& zNxO0G!(V!P4LV<4aqzhP?!yOf)%bKRvwchz-$zMIl%06{4;HW2bU>*|PBHlbbaX2N zEqq}SQzYy4Z7Yn z=Sot393C6}IUZa%`Xc2bM4|gKgvIU2LpGT_tdX{c?LU+&p>7z~2j-+73an33KA1CX zbyn5UBZZrOL{~KvG;!=PD)QHZ~=&(6&~BoOjr%d;#Qfe=mM%CU)w49#1X!Lt%=qIXau?T)T7A>#_; zV;b7LPy#*|P&QivQPH(TQ{l);Uvuf#T1mNo?PW$mWo7aRtGM<5T`iN5{nH-cKNcr@ zz0O2g$ZyRh@{j)3T;4mHz@2Zt_*(ZJz&_R3nyeIG2mK~e+v<570McVJ4cw7r=1A~i z&i;8y+TF_N(jcqA{3aS?Tcv$pm}u*&c=t~H%Q)~c@Z<4^J)4{03k53YGV4Qw`b9A^a=ifXLu8k}X25o_`)49r?dDwziOR7})OA zp0RBM9gx@ZRT>ILq;M0`N}xy~5<9r2(2xPmTsc$(FOQOzsxGO!KDHm7q|O zag$jxg-@~Kc^Iw(zS&&EPOwuBlU$pTE(4*3i=7oJZe{!1i)yH;h`qEU=q;aOf|r7s885z= zbcUt3=J%UB!ktuldFk>O5!5DQUjkK}Ay-j|^{kT}x4BiFm#efk0dubR; zT48NTXe_8)8`b}r)pIyr@>}tPVR5U2R#D6bsrunU-F~pIbt)-Hn3Z2=6Nyx;+ z90MSw%DKhKK^rz;zVe>-9~`C5h$JJy%6@)+mF~32%f=rYr}LEKkgfgc=Fu2f{M9l= z_HhZx-+mt7Rvs3!_yqBb6zcHqeK5)K-cbqnOSi1nQ5=e`cu?|`3~W5;;NTFFgJ;q1 z_TxB=1;xF4&J*{>b&+mhnDG^+`wC5`GCrGoqOSQ=FGh|?Ovc#XdNG0 zw(VW~GOJWcnaG%&9&)NrcKDWX1LE-@2GL$j^A8cw{ybNac^KG38`t$kF-~bo$w7|W zja1yu&dw;Xu9BRd-h9)2i()SXg_m$cQ}f%ALfam+J>*DZMTMWbw)qcfW#v2C9vJw3 zT|TNn9;bEKpk9diclhLb@8n;2`*&d7HDiQLv$0C?PU(yd_-It^1AEB1041 zT;nd1eciFopTFy!r-W+iIuv*C5;eHYG=DiFnhc8_f?&}}>->40 zy~V1>V7wB9(L(*eGFeF9&M?FYErH7Okkt^^#2>~4zR z{e2hiRDMv#fO`P}hi4z`GZthp3-#+f<=rjOm?e#%UE-!!Qc?=OANJ@`Aofsffyc%8;RuTDCNJl_4WBFYSLG-{#a>co78D|IS(WmpHy>k$vNZ~ z)&8+=!+|GcS;RDSw8%*UL`Qvg|A2=StZo84y&oP?!>0pw=Ik8DiRX!l+`QOxg&*y# z1l}VP*&ozLhb@kbEvm5jIpL~s{CFu;bI5%;j3;jAhn!?GG8>8x)p-mnq(WDXKyfLt zEg$rDA$F}%DhP#Kw{K-H@fvdjLr zYzU<}2d3>ja-Vqcj3h+CzGqP;r)=MZ@saHqUvT%h>*N=wx9w34gE(=PXKPtvW+{B$ zkSL+c$w|2VSxX^C8TTa3ahptHqG$VPvJYhvq0HRf-5*Vl<4s|G>Dz|E&SF0}bp-gy zg&e3op9yr;Y{HzabJ*P$Jt(%%1eC9BspC4P?N-je))DD&FF$p2o#CMqoNt(S^29du z%ZX$VA-9Db&%7fYhuH-Lsy!?h@T{I4s1j~RMBIcCseLpi3G%YnD3>gnHMoPur*ZEFdmey}T8jsc z#R3CJ^yAKU*%xy!#!%K)IJeRE$wHNhhX_?BdZa|`nh+&8=~lT7*7IX+`LT7JJbCjG z?Or?pg_9?@yNp6FxCE%=&vT=zcOSy&kQ6y+6fR$05-Rcd1{pGkK9nZjulDg_T)43* zp^5QV^vL!xKJJB(4ip^8fPdRZD{ljfqlTg(<3b;<4cglFx#Vz^QSe;Kz@vio6FhSa z3kkM74ADdA(TeuM(?>hfFh34OkRD1{)tMatDk#AHp}hl04O3cq|b-zfV8_mnuV? zbl||oEmg=aI2uFpe}Nb#*jaWI5E%ykAyQ6uY;Qo}1*o@p;MWg_=D-lzkLO;5qrL*- zhtgJaI57{c7h;6K&-y61Dv93-4fTU-ir7D)^~s!)f%zTbg^2WW(zQ19!@cL02Mo96 zGN3t?oxkBxn2!U4|6vQ8l?}o>SM<1Bnay_RQD5MV8?TYyWHEr0<$YK|&Xdxv$!#82 zO5Sen(K*eBxGhBBz5{eE-ITk)K8^+{6=R+S7VShdRU2K>?VsHSjmCm&Vd z9N-Y@2gqE!nTZmkEX$r83CdYFjiZE&ZXiY9)Ra>VLjhJI>auG%Fye%^ZHvZd*3#Te z!dKhfYtQXDdowoA<4~T1EA*%v>efZIwycVon|d=N!h$vdj|Lm-NKmwrt6!1cK_jE5 zm3u3DY{U?EBfDU7`9y3nVq7{$M%s&XCa@K6MA7I}=$N=Qo!F@ls|hjt+H%}MV%TG5 zN|(8O8QY$B_kcd`gWho`4@#LaP=w8VTaSE_GbP{Ws;>cFfXu*|w+!3#_4XnLPLpn) zc=J(@;xj-DTS@Nqh&_jv(1V zyqh(0A#exW&SAOtq~w^a>SoHe{M4Q86rM&iN8* z@*mEZa8fBremH>cFx2%ZvDI-0K`xP@SV+QbQO?0+37uuVu3s{!=B}f5eoT_-W#seX!_rK2-P1L4f@JDqjiDX}_P3dSx;!^SUk5ShD%>@n3!CC7l1H_Q= zlbeDEYXv+W#~w+s0!DyAsu-?|Peo-AdEl43O1!@%?yk9vr1$f+GDwpi~I}w>@O{w zgJ?Uf<3(U3u2A-AdQ_wO^9H~y?gq=!GtAdhBu{E-3-|m zT1iHsU@coY4}*hwH9t4wJb4D-m!m;1gji@8Ut@kdnMbH4;Ehln>>w*G1dU~R?tLby z$FdyKSn-gnqHXJW5=bpIwFG)Phw?<#_?|X~pr9aYNR~hhK*md==AiTspAQAWyn~i? za`ny~S(Ci=z>8L9a~$QlX8=^1DDkZ2qH7Kcgg_`9TQM64h~cI-veVJ%Dvh3xZm{i8 zCo?4Ro=8cFjgbN^(z0T85&Drw7h6pGFDj94%IWW;se~T#ry(ki2gfM#BNj#qB?krv zhaGYxDAzwhjv9Fbg!i7pOi%s>yd!``#L|wVj6VsB$gujcG=%tg`(+St=sS;MLE;*N z2WNurqTV^iefrVh#)zWv7cRNNiy4A z6i>|%WL_VAH73YDc+k`%7>|we6{cw?1Uu>$xNXLwWu31#*%yTguW0cQ&ar;{6Eq;G z*g|uV9qdE0R-rq6>ALLtso@?ti|E+-_|^er#lYUQt0iz+G>?d15i5_ui-I|38x zf zuYuE}v!{pa&C|7-Sud87Dequ$h+^RQ@#E^L=hjGJl*%rDQB}U`hm|QmWl8x08`maH z*#>o*>8+qMNpUG4dh5BLein7FA3gtTr0t96&0_%>KrE-4Lmi4kn%YM z)glI{Wf=M1<=A7Q4 zS_U#!Jrc1|n^mx>x%mbPR~89}_XFc#`8!b=K{`D;(?XeVw0}VDxZ9w_=fvb; zr8t!r+zk0K2?%L?GW~s(-GeJo&m^-23Db-=0g&l~r8?mIKDq zGHTS72~9kk&m5+$PHyhA093q#j&^Vm}HnuGFy5tHu-*#Xa&8bd7s zks{_^7E~<6rgd*`0QrW|cWbJ2$R_{x92VfnPo?Kouw3J&g##ZSQ&hYLnVN~(ChN1y zN#JZ_@>0RPZ_7{*?#6(3rN!g`^+hR}FaM$!f8eva8VY}GPuC${evE`+gmILi@+4XD zWEeO07!sU{X~Ey>HLb4bi*vJ~Fafhr+|l#p3;u-@$rA&EQCCN^>NWw$7}_EjcWQ^| z1An**w@FAa!<6-0p&bAQ{7M^WX>0om#ksk-2%#rz--r4uJGNvFwLJUo-5Vfz+Y7be z3Rr^RfZ*ihBw@P2zH)$)&fD0d#6&M@tWz z^!{D=IKh8m(}*%%+?^H!u{LS`4!j_8y})gD!*DK;p%#eUBhko;yR$JDg9LwI6Gg0( z4CX>WfqW;&?(0S*Vd`h&9)-#KMI>W**&VK+u4ch|;l2aI30K=A5!aJK=esX$x z`o{OEBY5=4Nbf?PI>b=2FvD@52=jr*c$fb$*|IjT`}B)5cQ4HJX6Edj{yB{$^pN3H zmH8!NiIOr0)dLyFg6TdVDd zv%zv14A+Lsmo-U@csIvS=6I%V+lO)}7q79=t*XGiSmf}~N<{eo1DC|lG2oCVQNW1c z6t%lU@V8?R_q~k_5`c+** zO){j=w5H|iM<+;fdFlyntodr!2oM-m9tOo)UZCjd>(f-7gbd#?*&D5C?}FjzQ1L_Y zPqPOWUZ^>8y}zr#%Xra$=+wD$0XLSuC{~Xzw6A?$yV*Nqn`NwGChLQ6R*hI>(xx}Y z^^Yi+jZqCMzMyL`(2TpqAj;0Zon|d+Y zuWnoIvgPcP&Q(9YWRLb06gtYSG<3-W4~Em8B#WY}D03c;p9qqalq6(55f~!^GZI2L zfridCGnj?-C8bRHir3hDCCW+UPKsK6`t%8DEA@|=1$8e1O9Bp5cI+PL8RF@g>~nrO zWkX$EQ*(t&F?cI@AC$Ny*#D7%;EyySJ9WJ)Hd!;%)1u+#0-lng$>ma*{as=(=D9gZ zPi8gW3iiqFVquM3l7x>?lIZB@IcRJjhrGQbC;`Bg&qdPuRkeHBDq z3f$hc_RwhzNkRiZ!>QeBn*JHW+2kg3Mn=YiuC5X&)0W46@+I;lhY~FT2Fup0E3nL+ zYxM}?JOXg0Z1-_w<6v+_{8LYjgzKdSYjVaO`h+2P306MTJ(EuBsVJ7CxkC>iHu#;N zo-)4oAQ~KqI|%4iHi$SKm;6huADS6--K0Gj+6&y7y{Xxro}|R~Z3|##pNPmItV5_@ z$9ylI)752zf#1~B^m@}794I)*i_L{swK@G-Hfi6)dQ{gCnxnh}4bjq#Ei2ewZ)uqs z%Wtf0T@aB4*^1?j@`$85yI`$tE;KYeAfu2DRBGB!z!Wj(%! z$1yRaVX^bj4>7yAoRi+~YsNvX;Y*%lOpmmSo~*8%%<18$_gl$v`%QGYxE%5l(b;r} zyrX4hWkrm5G0SzRQP89jGu(gfiiU>^&JyC zmSGg==bDIA6i?`hyQejWhlgKO_2ONks9x5cIV#>=)OToRZK|uSv8PB-!o!EwN?m0@1K&WSwt@* zlPs#RkPXE!;vgQIwMs}xkfHBjp}TNQO?=&XNmG+KcGp*A;9axKbCY&-6k#o4G<8Hn zj9uf<^SLL7U)YX&-51^}n)QhuDZmX!M5Yzm=VMW)EV7HNG zN;nRRfdG8_)%VDCb{$tnpH23+N|BCEK#;`yKm5$ub^*jV-{aH7am>!aAyxb#f-pT*c+OkI9KFN2`f8`$6fZCD z*GFJsi{LvZW~}NSNqDUAG2oAIuP$G{9EaBw!uPsts4Vw`IMuC3GhD%>@&GA_SwgFx zjcxRmmBRjmX?kZ{PQr4}At4buY22pinIGU`GH6m-Z=0n5>Fa^cgX2<-tA=#6f23<~ zau1Z;m;4Q*RI0CjK`_=4&eNuBjPY22g^7982 z7-hDQ{9Q80cLyI|2_`Tf)lZwW#^u_vBr^DSJC$|hkuORE} zobA0VPcZVkR*1r=16CaW z23{T>(d9nSdzRwWD4jif#Ol5WB9hQStqTYUz_g!oU<8t>7^b}vo8i)s!BOdb9%22N z85yZ-?~b6mK_^M|Zj4EAz4vnT`~K2&=%-TDS@tx^ylyX>TqjEL?UAv~sTm9Yk@1e= z4xR;OW2Obi60`Yav#8M&Zwh)svZ{|D2dGfbnXJ zU;A?E{g=U0uftk{u(_B-yImB$2-^!1EfJnma1~1f-dM$j2paWoNq_BoRIoX0vBeAO z9~qIy&Ug1{OgVQB*f~_M_Yoratfhig+-~)r2mUo9IpPbe=t;g530cDNir2+Mj#u~x zX-J2N|GivLAVmOL)%bh!;77_f^sPAKSY>CUt*pH4w!)XmR0a=!wP&_KQLrs<<>K;6 z5qQM;*1BV|y${;vNMnlU;WYB}~|5XTRT#h^U%L8>K2r%^b^!XbabC zOA|`>2;kSvJ6dR&eZEXr%GLQ_@2Rzd0V9y8$X4~!EKcRwX?p`>?$PZ(l|JvpkHtNErH{v7n*jefjWHP+SE9^RxR zqWiJEef`y~r<9bsy7r?AgAKA1Q6b-Q+Vs(78oC~FTy=Hp>OwK<{QUeaS154>5fNLa z?GXn-Mn?s9M1~zmoJ>ecGL}p~fp9z&!)8qt3bFMCTawU;pPZVwi*Hu_cM1$X&3@O; z_L~Y|xK~2ZkQ@yAGvL zEWW4IB3%b-ckV=Uy~OvMGR)}`Uu?1({%&NkVHxG6t?CTLvr5 z!&ts$fGp5Hvv7CpO1jO8HyNHs=q9M{t^eUyYJk@G$|v6)J9g+<2!6e(lhnuGhH-lj z6LlT4DGKet6TFK{LrqxJtdk1J7#`9W_7fD>iUiLK7BD8ADltvxKo$yOM83blw{r|t z1V}h3Itu&34)d>LsO``{g-tU-GGN=DmL6zsWko$Dj=dj-m0l%>;xf1z#40XkmHFXy z280N9er&*oyUuqasGxbdR@TL(_=O}!2rG(6JW$_S*Lw%XEH3gEH|s82+Rf`fCaq#w z-uSHXvW}}@U%Flj@7;+;Ln^-H^XJx4@i_%44aUD()?)nm9YycE{rVNEUGK!l>IJOo z>DiMzS54`#a6i|MeA&Np`DC=VTau=hd0WoCw5o`~FMAmK2L}yb^r;~{@XZ@&aX90* zjj=6^v7tq%@TpSJZtFP717B1kyvVy|@W&IeR+Ho7n005TPEmZyPCWeZ;9*D5+R$X3 ztfq=R&E63dxI{jAiap{UWsqX+S z?PlIY#vYq5F-W<*b#>suI)%Jny`f+U&aouHT|FkQQ*c=$^MN@sSP4nw{D?to%9NTQ z6kR66+tM*oV@8A2jbk1cLuYR;<*|Hyh9#`}lJ|g}U4h`75 z&Co=zDAZp=7e}bnCN<$*YQ1azOTAM>{ViW~wZj^Rwj{E+Ql!&Ep5#zx9jYtKeWXCK zx2>)1|FQKR@L2b4AMiyPkr9Q+NIMjjk)5W7T__nzDrAIgAsSYRw2%~ujLfnLrI5X{ zIvq`0$1X|q|@2^yVWSg zuk!BWvcruXaIQFFH`pAp8^d}4S5a&?O9X9>)QEl2Fi_Rh)Hm&X@^$InuwPjj5f>SV zT^{PTl5~T$5IK-UzGFcXj`PQMNz2Ie2@6KQpyx!K{8r$zQs&!6u-@Z&Ey6(&$KZO)@4t7%f+x{_kV0sa+CJ4|n!=bDf?4+UPR%dQBot z)_KYnox$IB9iOy4Xxvv`UoZ)kH1lQEd7S_7Skj540k;(25j$Uh)Yt+jfyS=Sf2@#a zmD<2uTgRl3EF>c0ts~5LrgXW@dBg|<2BK_EZolniWBw+%S+P;F`btvkwcBW1sxEJs zdICuU;5DdUi{I=(j-D^_C~iut;U0%Ak|#P(F=#XX4Vaj*XYC7HFHUfBb90lBsbibj zkp56ZY16Qq_1LwpcX05ci0=+z;X}~C0K($h%ah$lYn-e@{W7w{hDo{{To^WY{QCWy zlHC@ai2Svv#J`UZ-PFg{v)c>mn6?TDG4e>5cep0ZI0r7meo9GeSQ-{}Uz}_p!YfnP znPZcK9_C+rPta~yF;nwI;pOb5y|m9)%p_giEpH*a_h*`6hFSJX-}6d_Mho_iDe3ec z-m7HquFP7QH7uDmqo45@p!%lzra1MVNyz`s9oLPhbb>$=Pa=G63bByB=SRlR=OX5~MJ*f!N8 zD8A#*2#t*Utct6(H#+44`PKV$qm!ztM{%tH$KXnY_z4in zlZKw=PAk%Z0onm2#{5zAL6gPle0sK0c)1d|F?> z;>p%>Nx)hd@{~7HLKfiN)YN@srqS5m`K*ez2sGEME5*J=qkAD<>GZtFNGcN(6DgM& z(N7n|u#S#&y~+fJ>~-%R1CfUepR=^wjWk!vmsF%s=?J5)`Td4Bh8Q=_zU$5ze4Ul` zZ0ryzw1BIALPJ7KY;8ROGA;w#9ahvirA9|zYHSP*4i><<4_A-L>LhjEV<-b1W(SR{ z)D1n^=vz}vSs<%7+{fJ~23^&D2>;5B@-$DMrb%h~HqhuFGBss?#?>GA6=7$xD|rnD zlRrQVssOqio5Gt28t|2$Pj>1}4lZ5&x_z)|rpO@I3-C6+q7?)Kt4uiC={;yd8F$67 zTe!D)=T1GC@AT0y?8KRh2#w$K2M?_p#4i{bdZ{x1F)Pb)dEsE+&=8GsQ2aJicE@Zi zO&=R1%GXOfhpBKTNjn=H+^=?$`4|vo94z$5Utmn5Bf@ye^8p{HwX+x!8RXy(rlssz zJI(F%teiuw#SBP8%ZaisoBH>h{zurgj!)yjf`Ss%7M}?(YKp%TDMor>kM-?X#Qu!)KX3uRBq-(0pm)!|NK|%7}wQ ziP}Y@%N$WA^UtiNrlYVxYvt0IwWo#;ls`3yyfnmM8&o$jqNfmhbL_7B;Ys7bmrK)m z2S@4(jy1mfJ)W6Ov3Q)36EN5F{`=@cUSx*9qgQX-?Q*%dCngumD=SM;?%ajN9G;og zyFwWk7Z+!W_?K=%Bu^6VNn7g-Z^O4|l7aGlkt<*NOs&z+vKQfV=%B*gQNMe7-kL4B zsjIDU5RJrv!|47g%D)#y^-&89>%2RI>fNfosm0vG?w;#msM%w#FX9lrq+{UpwzU&1 zCLs7VJUlXk6OQ{(2sZCvuDxP+^e7#GBjbBBsE$d92!>1Im3j&|?51!r)P>vhUJ)19 z2Of{3l0I|Ev&kGx-d4a9Kqr|4KWOUeuJS)pw8PG(Qz-xOgVHpyU|<%TLZ8T z>@_02Wxk$vEFFpIeud#8qUO7uc}9XQre_ok=9$gi{J(Y;0$C>G*jv{*mYU1Kf;xE$n;)S%^cI)>h8$JlVZ=A>4fRz4;`E`^bL?7 zIMrLDS#|vbO+c=^p4$zXUCWcanR;FxG_6rzdOu1v(teuj;uOW&QSmwTGLM=O(#44t zZqNjfIX`&!#D;~ph;aZOWJC;DZGl~|#r^*Qjoo8z!>+fy{jjAOOt$`ZKppcT#c}*n zh4egV?zWLGoes8GwA4xvwn87Mvw{|v1b7@HBO~Z255pJ?ZT-=A(yE=gM&=e4lW~-a zF3}@LjtGj0JxCec!pcn1v6k9^830B71F>UIWgUNu4y|@4r5}mb2TN;v|I%fF9cp1~ zN~pD+7GQ&7<>yy*mt@JgCdzfhTw#Bkb+q(TznDP}23hdCgjW|7EHuvc(Exl14*^k0 zfIsjX*Lkf$b9(B_<;z#EUa(^ZL|4`*vaNBt(S^L`$dlWLn%d;^m|DKJP2oMyG3&XN zqqjyQK`ugMkm`K0`w6PG|ExIt@5$s64{IUi!GN(0YV# zxb;2r(){rG)I|%{bFvjE7&3YH!Jws!*doXG>i97Ua0qEl-)s2K}GwcZ4BwhwT4H<_0p zrA}&K(5p%8r>DqJMnXbB%DXnTH%?2CRep<5;K!DO0L|DfVewra2$Yg${XOViK-)jx zF&wEe^)n%_W7t+>Xa`X8Mf*8~5E2b12r2AIq$arY<=U;y_I`KK=XhY~my6J&8oB5L zRKpk-m!&6wJ!m`ykN{EgI!aAP2f(K%G94foK%jVQ+_xx*Z4IXen5yZ z81?435k^Rlv1U!?-HTaQ_Bor&k7}PQQM)8K(saa(Gt^-G-%38AwCekJMgE_e^D;nq zUY`&|%=IX8jmFa!u4s!|8_;nG(@hs7Er{Xz@9|i?t)f@q%-Ep1)2B75K;w>q zb9OW}qsr|Sj}Fd{)|JGN|5VKsUgz`h?$(y$%=p;;?)JOf3QLxj@A;ndMXf)6oXksa z8FIjISn_JVJ>SochnIO{gs;tQ-U3G}-(9-M-BP&jLAeg@}hO(c@FsmUQ?zV74vz>h3SU_93Vej!3*@ z=hIU^u>ih*Cxa1wqI8gdH#@NfHLaIM>_n3HW@VDngZD7@H5)I{=-Y4gogoKwrxdLb zE{elAa5<%^v4*mafhJldtn6u%@jh*-iiVg*7ivuRWWdr<`Xmy`lF* zHEn3k-8lZ-z&L)6?+s45AN*RRheXGYOgCg`nTX0QnoYE3Q{hZ~)+0YoFI=lI|E+!b zjJv|>WlOPP{rP%JmS-6r-q0H{pNU&XfLII?#cXUS47|V<5v+mlVJxUTU<%2BNvt}o zxv!L5N$IlPRIs*xFsI;J#=)qnr1Ue4EG(v{t|!FtnD026c6q~7pHr_-YuYtmNPfKc zozrHQFp0{L?(C~|I}ycd1Tmyv!|g{o0J+hJxy%n`BoOt&_;XTz2>b;HShL$1eT$VEI+?owDoMG{O(ZQ_Uc1(PGEnuziK2V!gt!v% zyN7Ldyv@zb&VDZb^)nA9?*JO#$aa_9x_o@Y>c0>6>8nx6p~LMr)O2Dr7jaMy!k@hH zNtJj|ZV5EXBzdVVFDkp$c-&i|d5_N?cE?I^RGAA;8w}ieF?VCyJQQdpH|Q6h?h!J3 z1{EY`a2;440_m<~Sa5pzaW0vhXDvYTpugeZg?Hx8BzS~8vD%rNQ z?na`)!DU`@?fILPD*Rk6jCw|~#yyulrpP0gXXvua*nYjwi<|Tk3i6dsH_O^y7NXnB zbC3DO@Qs1KpnEb*lf8My<9$Wl7KWWU(``i%k=;v3*aZ~+0!-JW`i8{t9*Pxpc$*BgHj2% ze$c~*Yu2ydpD+~+HWOjlT%q3$w6!@=l!fiF@bw%R9O3AGYIRsrh2%*o-E4h!Ir9v&Dd zg3m`v*zlOi$IKf)UckFWBu)@T>Fzy`R>M5KiZPq^_)!m$n>|)iQdu!-UAu6j{(-;= zfH(g*(3?al^_#6cG5_W6M>^Ii^Mc}I6!Eik&%Y+3+ATog1{3N%=)H~M`e_78E$WVz zUQQ?Z0u3!KEohNZk_-+Dv(<-N`GvuV`WFjMU(?)C$HaIF%@jl^%M@YbW!Td2<`ysAY6!%;XNdilq9F7C_1S zTvt!kM8xi&O2hm{GY!RWmKSL!Qe6+`1N{{41Syztxw%Z1Gyn}2dUovvM<5oiuCCrXNJ=3f;g^+an^<0FWN-qyt2zM2$K%*$ zPhi%{%3qQO^xpky)JQ#g`~#l|npcQD&{;<@58mJWrC(sn=FI~8_diJ+JpAsAb8rr* zIi~ADbyvkn_8E$~pZ5#c3^VPAxCdfWP|`Z`9FMA^kJT!3;-B5+4G6UmRq!bC&m+Mf zuRPF!`5?9*{FNdNUD7kFDc5amdhO#+HrPqGzG+c~5ez7B{cOJonj?r?ppV0y;(2oG z`1Te7Wj3_oNFPi7^(G@DG;NCoC_oS~WTm!LXdDPptE%B*2+bwk5Pmo;Cp>-Q{Ety3 zhpfY1ePiqVrUh=Cw2Sl8HD>kDwE04NWVED$)%pn0HK-@Z40H%Z$=nsf8>twWZ3k%K zNy|Z9jGjd_Z}zFSg0li%U!N(cCZxo|@pS;yERAVSU!dE>CL$F9)^|EpB$&+e1Gc>)zLnx%FC;@V9h6d$8yDw0?I_Cu<>TMR5RvC%`qSML$=E6@54?E!vao2)7xe-XiL9E)Kf)@2#y&A;*gwcU5&-DaO z#-D>6Thh}ekhlN8?`Zm&>e_z$RUS0_f-5POVCxu*jX@ z1bh$Xvo;uF;>H|jNlH7ajNabS+EbYj7NKtUsi;uFG5wRE?$8Y5G=A8P2%tiA$Q5BS zIJuJyT9|EsL|u{di$sdy1x)R5dvXx|H?#}1l=gRT-hfxUo!iMY&3D6BK{tGq%n~5(_u*7=DS0nxiY+@wt`yj63 z?42rvd;$T$T7dVFZ)iEQdtbwbdvIi8MjyoG6j`RO>SQzm_4`vV6f@+NM~)3AA6$=J zaP~)_y!xA#uJUF)-CMWI6YahC3_t9J<`+I(uVb5E4l%96C|N($>lBFBr;DRKS%50) zsGhrB-*lTB=eStNgU!l#_=p{KqW|zAN+b5jyV17RR)1(wq|2XTNJ|hKM4Uutg5nL@ zTuQaUi)KxYE3XbJ&^25!v$vnRgJ~jmMKZJ>^t^J?Rl}sckwZb|t=rx`cJLt4W;i)J zWAz~q@fOIv!Y=NUMJ!rprL>!Tl_H6Ewq51iyE8(N^_M*1wSx$$Y*&4la zn?BpTEBucKj~upU{}ChLQ$hA`r>~3=(}5;oyrk1XNfhCQ9`vzI*M}?m4Tn9jtc` z#WPzuI?mo<<~m)eoU?@S?^Vz~0B%EZ!6*fV79M3)O^p})N{Ef4z4-0Jp=orQN$6Me zDqh2C5TP0KDj{IMA?3u}{JfZ`sAAqOA))c_C4?F!n*em^$BSJcEM_nzh%4<7w!zKy zb>c>E&NFy>a!{Gn?6793wzId#5OItIIIef8-A}rg(EqN2&g@%=(cv z?_b+zDQxdJ9?#(6J^#yy@-;#2$V?D}$P9NPf=Q8aCwgu4N&nzMnygl499L&e`C(Ot z9Qe$syD%&_nn!7;-nhLpkjrW3iIAgYhB#~o;Gc?AbdP#DI}%YG)?8fCBXotx{*ayh z_0X>&XNU6@3yWd^C%v{d;30_u3vslNLXfd=2q?84X_I>{W$h`SW?^Z06lPN#3O$^r zzHx&lP;F4Dr)Hde_gLJFV|U*e$V{Tv_*ckPrtV{RMUg4*nrApMi6V$= zYtYk#XXrUwvTrvJU%cqmIptS8}KLLP_&^%fqyZ z=d+IZ?gQ(}6As;`^i4IOz6i*L*R94Q7Kk!A4>BFb1kr_C0SGFYm>EO5fo|9ffNswr z_!PMQ7Pue~q4=jOmW~H5LrZer=|uk>BiLbJ*Y!D520b%4y}GG zDR9pPGcFnhAMp+Y<5np|R&zfXEbXFFs7$~4;>Jr@! zFK0ovjND@qnn;XVQ1vn5dN6+f^_l5uQ0*S`Vo8MefyPP*L2S8#l9HVGTeB-yxNr0e zwIpTm1+XK-M5Cy;O-NO)E-oDe}aK+4wBJ8Z2>*A=` zQ;!jSx-AZ{*`=nX`L|pG+=KJH`an4OUBFO@(yi(;D#2}|NItGMCNG+d2N}x&2Q-FS z(f5isevG$nHveUeJa(ia1?z2s^s?~;Q#fRs{&C9xcp{{m|RC)YF9%DwPhh1kdf z0)ku&m8^UVy~>JdV?z%CdRZK!l(%-we*)tX4ajavZ%J^-K7r}?Koe$2}V z{be)f;u<6$j56e-Z9$F}22cwC)JHLliUmug(z- zYlAxQ=@J%iB-j}shcC@Kc(}QHNBliJsG#$9$Ofw%*x>$ss z(W_~<9yuNuGAhdiaJ1ITiDk@4y z=H#UKk8^20Y&a+5=eV)tV2xyPm{&GpVLf}Y_Rl+#mVR213#Uur-b&en1|tIlUSM2` zI`d(TGbLr;TRL{!~o$#VJW}+xA_gDk~lSCEZl$+Z%@Ttuwxa$y@o!=TTR}Z z;h;yX75{ZJSp&B1i{5`;+r<-_n8N@XZd$kLt6EPQLd8^;Gg^ko*f`h(!U|_GNTL(r zG2aI!XK)mdWfvI0z6tmCx2Ms$HeJWt&Qfxa8B2OrN{=A@g>PLFP*g^^{9c7^K?GoV zstDd8tj_T8wK>yu4BkhZ?j@FlmRAW23q#fCeQYzgcAPA%YN%=M91_F~cp|H{wT%6v z0yI%9HsNKaGyQN1ttMKB^(p>JIg7uJiRh)IqenYyl;{2?l*3ZWTB{unXo*&Lv$M;}TGN)#Y?_)hO^ICo+!IKzxI zjw_LRjr+VZ_5v7@qG>>c5}U31%(lBSrKg=1<`}p6xoeP0$@i{=z6ZT0Kx2$W!<$V*Cn1joNh}KUKKU{BAQ;gwBCxF&X)^M!H+b!Ui|L*nBO+ zYqPQoP*%JoTn*D-9hyOM(Pg3R5_~|9M;f)W3n~U+&InFngZvC<%*ED_rx^W!5 zahXqXjOhqpl9NN#&B$Oaj%D~)9%s#vhtdFj7T|F@oJJ52eI__Ip z!EBo)1w=4x2mTV1cbl2_2+ctTCgsvyKthsi{2#9=pCo$x*LC zU(jH@?H4tpme5{L0mYz;YLUo7(1_*A6FuVeKkJ&D?6_dg9L5~+uZuU>;A0e!HnVtQE60C;d2AejKS{KLwY=WO)TR$L^00I^TE4Dbs*cZcJpu?+J z=7Cgnz>icyUN~KeS-p2|84n@y&6_*&57L{=rEGgyUHQ>8jdg_@REIIbG^ZoU3fCYa zc`e{!jn~}-t#f?XF{~JXrNq|&n;~Dj+q?)mrPW!j0T7lFr4xLGz&Q1N&j-)}7yv)N z^HHA){2;_C0LKK(qRz4r5E~o>?r`+xH&?fQTWOLN8XLPqz}}zZE&E+(ZO(h>%MKkn zB(QVmJ@Gp-+^$USHnYD?0yVfp%|y-m$t*nF_W;`O0zY!nvxHQswt?K4BjcwO1z1<6 zsG`^gbt^RE#4eYlXz>$AypbrECqwk^W0w5sY8k#GJ%<(Z+yDAw_SQFP8gLY3dQ8(o z99PrF)pG-+D)xb{S@??BoeF25W5M42`X*2D_5EcyA0SRC!FU|vr9%z#61pEejf-_> z3>n^!hS;doRca=}Q%N4=%d9LOK&~qfd_QmpFOJCTn8@TvQWQQj+|;n}Y>x>8MTgXK zv0Cpd6p$m~Rqzk4*R`|Y0{|k?kwRW6s>-1@bj}y6$ca*-b?wt3K(sJUtU`Y$ZdOm+ z_2dF4$!x@!L7olF!?MGxl!M4sKQMVf{plx~kkg+oIzzVgUt^AR*skqm6*xtFYAFAu@uxW&$mT` zx#)7u6@#d)^zDB1vQ>?ZpB*fTt{GAv=)+y6noMB>kIK3_^9*8g_)8JO_VVLLC#_0# z+{k!<$}N^@XMrOj#L9i0J*Gpgr~mGBfL zI7cORTH;QCR#P(m*G9~%=jG)EW?PI51}_N70NOY%?9wj5pUEL%-k3k{!p=G>$zHeZ z=^J~;z0pdB2OJuyr;=9D-`csU&H=>TTaL@P8c~X27@HiK_TJhUsAal4%pG=p z(J<0GVha<2nmyQ>tO{qXrb9tZ2%9RVnhbHerNZjTZ3tp8k{id8bHFe~1;`iA8 zRAy($RjqBe@D{uP)IZpCbQBruoez%k6@a;MY~mu1wgft7r=j2hMs;RwJaGKa|=9I0UXnHD; zpNs3ob56W8|`i>`VTKs!BoaXU^>Wbr_( zjYmhdn5`w?_3l?BP;sDy#dv;nIHXcAr@X35YAx3K^QH?Z1+h|B(a$`*+s}SVD=T|_ z%?l=Bm@)5)O-cmMRt384GaC9i@3@9_loQn_f}D+ArtGA7A;5Jy*bKB0-2y^(?r|(g zqnfCPR&}&o7U0o;>q?y4x6j9Xs-X_)9x(kG-x| z4?UFmm)nPx$1r8~sI5v=)r-{BwJ0`Ug>hT*K7sgR!NViw>huMyK^4C zQQMvb+#bX`ss7;8TlR-<{^yOnd0uQ~eW$)H1V_+GGNjta?QbCY8LiLrm|JLrh=4p> zAK!6QQ^}wp#3|=mtMuBnYYjmgVx1i!4Idj@?^H0*PyA9G?R}5yPrQ{?daVI_>6adl zC!{>bgt-m%KPv#c=R_Y`ecNr<+ri>i52j1>o=9ME`2MOi@aWNku>XM~N&Xxvj{EoT zD=PTnlq<%TOU7SZVtOK0i&k%6tu`*M`l*LFGw@4I>Kd?lFVr<~v0(K}VFzRWB8p5Bk^iZ-m)eo>;inXMBy zJ6Cin{$OOQ`lJ2X1ak?5WS`5+dB^XrtP2NY|1vGDZe)&eSHtHE)+f^z3Rc&#J^T`` z__~xxl_5Kc)$$a$BNi%mfAd|eW}=nFYa~+~QR2(KKS7Wb2u#3iC~am-?$3c9^ro!p zQf4S|a$VO%L4^ts@CJWcZixe_^dVaG9q*~60RAVj1~Kk)+mL38^4RhGZ&5bfMDasM z0SOTe^tgOGPPl^qoN!mZ({i8>BZUuScbC7#94xqrt^mV`0ssQpD79=65UqOA+#*(9 zgR|;QUB9|a13(}${5b*Xq^K8qC!JvEk_uA+h{p?PHZ}7(icwrLxU)u4+Rob+#WxJ- zs-B_z{0W%!7NJH4BERbg`6F|P!ERs3xb-L64<8TfvUd9af;fN4iAzRJIK@#Wkh03Md~%@0;Jru|0? zkWVcxiW}-NDktncyi7I?vZ)EcgwO(6t@Leg&r?&g-vvkuvHESharyeGAPh+obDOJ) z_z6WoA#5pFiwYf}vNCalk@24B3rRN40r5aPe%Tb8x0tl%TLy1i#AY?c#wCH z-CHsM_Ub^DjGM69Q#QS4H^BVrOzjCqvj)OZP+p$Q1Sj^mf=Lb(lt>9}7%)ni)pz%Z z8$|ZYmWwGBuul{};X@?l$hdP8sJ`arv&3RvV`mBdzyW}&$ZjLJH|Tx`ZiThpN*;uY z5ES&ZE&}*lx^`kU?H{w$#nnzhkYCAtm=G@!x{pd4RW3pRNW2o{RbEr z!=kK%Ce|yaV4w@|GY&_FF%f3{?-jdgO|1vbbiqb?YP69|JFsP?=!{=BZxLYa_p8;1 z6hFXhTv}B0CRpR|iKgXGy@|IFO()cDI+<1*f$Sn9$nE#Thz>m5LxB8|;>qN#B-Wj0 zmeGQwR4&y8wCM0(=+^k}ICWReY`1b%ZS5zia63CY9ZY5?JjkEc5Ssu*4a8;gVOy2i zNUvaPYpXV}+v>`3oV^0Ob_Gn&N}R#gLP{XPW=rP#zS_S5M1b80oX~XWZ70*;gdgyE zxT%4DPWMV3lrz&i%k;Nj<3`R!fkT+U9re&FG>lM>$2W-sAHsAn4>Ve<0|K-Si~-3K z;~wD$Fv9XDW_wzF&_lE<3%=H=Wj){$kXX51%_!Y$3-Zz6MdX` zzfy+RlP8681z8a4>Qt{a`W{XNgJzyw`8YPr=na8Q>L+Fhx(%9C#sypbYMPVY(56^L zEl7v(F|f=Kgr`iG^<%{eJ3Fr@bmq+VXj$;Dp_?e?Ua1wUmDIFQ!5c?v+@>Q71HgI}m-We%6u-OUX2+M+8za7aCz>Lqp zK17;XKdYgf~x4MkdAnBYB#`37-5((NvZI3s(U&t$iG?5Oc63sZ0# zf6evw-#moNHePaC1}+U;_4)K{HzUaAiZ`p2UY7=*X8(n9Ux1#P+y9cDG)eac33%-I zaiV#~tCZVw4x9$>A*)I)P@E>G0^4DP`QL5U#jlS*8}C2YsWG$-TNR#-Ba@OljE+QA z9b0Y(2zme6Ge%sWxMqwY_k`sveMoE}hLoh^C6pd3ViDku?1hpVV~lWAj; z0Dg?R<9@*E1eYLsO$T20qd7*rj1te7NImlT^NZ!mKHCehm(D~i&+1LS!#5p$U`adV~?tm>fg21qgtJ7hr=%`DHNSL$h-XG^Fx(jDN1`9 z=K(U|zRYjfz_`gy>;Z~uDnrZnad=pAXH#IlUW4!)Fl2c6c;E!Ih4g;JZCZv%!*Pfp3Dyq|BRKx}=iHVGm&mp1NUJR`7MH>Twd9fSR^m;JGA<5#$}B;9o_G z5ok}qGyN0`UwHs+e?Vh_hmf2+M&4Z?)_A&t-Fo;4Wb8XbZ2HZTOy=OMAU6?-N`Ud9 z&t~uO$5pN;$wAYpR#V6Dc(lBG=oAiyn2(Wzku!t1OtgIww1W|$XjppR7tfk=@ zitW+)0J;$|i3o&Za={chB*hZ7AP_lg_{GI?VkBe2hpBCbAuG;HSDM(S7ZZ+q7T-Dk zDO<2{UwM1qz`#Kq>o63`O>pAX0oN7a@I{=ZAHKD9-)@AA07S+n@zHcQdi6f^u0#Ko zw6i2bt0aN1?N#YHVGcN^cJYGODG+`P-WfO-N(m)F9KQ4MHnJ>Zq9Vb zUIr8i_0^2lYeyj@GfrPqS5R_!-*5RIq~)yifl!D1Y%YO}jmOC<;DWE|*)>NMgXuuA zG%>KWQ4G%5A)U$%<*A7vpL;?j8brLW!^8voQ5B ztTNz=9W;UFI=fQRU6jL>(2S_x@GwhkxGdGTuLV^GZtEz1?!uc7I=g~yXUN_fO1dIl$H_IQO1 zVV3bKToc`=QX*#c9$Tm4M5sv5SCt)G`S+|agx(HYq9eBl4efKgse;X(XU?AOPcz=5 z5hnLqxYEAtoW4HuGm(8ET?5e1g>*r~uN%^Z{EAYSvH=7J;CeBdV+5#(t^!d7iV*(1 zixdl=3JyN_qp|T0S_@D)#3lGzLoB)i=~~W8LSKP6K=o`LUFwc#2rH=#e_3%k;5w#e zr4PuE0aA-XCPW|;!3P2g3hl;xr?s?h3f!?aS@P3r4to0Z-eF%3G5vx03^xa<~adaCpk}FlipikQ0NzR{%Gc&a-dvR zxcS<8p5Md|nSY;%DKbC(wta4^ZK4apTZi?DB}OHTJ7e$re?{AU)vx0#j={||A`$3~ z7g{kDgp-wISlIRDZg-A+?($k=)w?q%Waj>2uK#0tLAO!ja`qZ7VO(Rsf7>9kjEViB zEq^7p%6-e-``JKe#P^K_KQzF@2jdPfyW}4~a!}v~f~tQbxCGMqeEAYt`hc4gzv9uO zN7e%y@Th@mh)O@zx{uU@zW9O1$6qr%wKGoz1_V01#G3SGsHAiz#pyk{q7&8C)NZ17 z{0ZRS>#O*7KcRAK=i6Mh=JwUxbwrpRMcLpD48*#sk$>BcwMp+e(;trgAGJfNaz-L>>4K-?X29h= z$TVO$L?5;fcOe}Sl17)epgFK%jB#P2&_?tr6OLf6SJeP4Lmb7q-@K2;2o59rkVlVD zd{6^jnLKMiYKi{~7>r*Y;t|etXJOicfk~)1dI;J=Pp<}Wl8VY>9*Gd1mi zQs7x%3yXyhTqv#;G@d>_w77{(^ep6`z%NL`Rv;I|21j2a`&<`tT?B)Ksq};n{&TyC zDrocm8p^|As<{<8_QvL(jJRyBiK;fT_m2=CmBg8 zD7dPirat@T^EuJ6Muw4BS<@4ZCqQW6sOjXP!>NC~d*Hfz$>b55WM zHLBZWoWZQHXbOM_9MT7Ng<_i;f}Y{4RKcA`?>U-9sR-dS_+#NI)a^dVdg$0CL8L3e z>stTf_`g(mR)Sxx+n&bG{%a3`MIcD6t>+opf#qBO9Kyqzz>W?HJ}?*i6f()*1x6CiUw0D5^Ia?-Wr!(T&SU&gI{%aLmP!2kT{s{&6Y>0jW0b8F1#JE=5b}PQ9={*WT$b{zB3wJrs37rnw zOsq0!$AOyd4Y;yB)WQE%BAi$ie@lRWKPE3uG$jb7C|fNA?>raVzX3)n9ANkdOpPD& zQIfy&S$BIuw^c1j$SqrFz{J&cc4Q5{hOYeVJNw6q=K-+62a83`3hV%eSy9>}jU=KL z#|$>MOVHnuB1HqvXa2u7p(tBC=)V>AqlRzc52`6BK284-Q)}9v8;#OU{AO>PThNto zwU?as#N51@?^=w47B9-p zz(U&h-aWKch!6VKd*A0{G<40z>+Bw)yEu7r!iueRRr-5QaBI+G;R11du7XyOXo2ww zak8Sj^;5E2OVDp1A9xi7NF$dZPWutfq<)yjwdsQ4^{#rl!kiZ|8@wYDes%#sa|4HW zuGN}X-u2)N&L`ZdS-i%P_{e)5vcWz6*`WE0h+jY%nQ4i}4(+q4R!dJ@MVmGhwP7ly znVl#9S0o(sJSg=Ly)2*-FX!q^fy>mQSS5C2=l}xqUcq-r8>gW9z>y`aj1;$tf zqymx(9wdtuav6(uD_76vxVx);F}!q()sxC)`gz0t0l$Bg_eS)&4EJ0gF(G5z&?yC8 z*}b^v>)iD|E{<_S>4C%s)h7R-&`>%|y#UxmsCg0)1o2YteCr5`tg1)7&LF<=B3-7l z+7Bx#{sT0_<2IiYJ!%tFnVK53;LZR#6_sg!4!2ueba0PV=4J@lwIj zz8o$j<|qWrNDM@zv<&SX);bFp6Le4tLk>``={!0=(R1dQvvZcAD_jfS$j!VX-$uW2 zdK-f>dl&F?@i|MKgEim*9 zf3qIxLAT-smAjQylHm!X01C(HtG*ck8_}?j$VE`3a69~%PCHG%@#l+t>W#m0k>NNf zR_PYYv1eS1S08XN6oT+)WS5>lzxLAj^zZR;VpPW%xF|&Jr&h{|igsAPuCKER+&xr$ zn%6D%)K190ad3+b?ZsG>g$_CeR#!ifEs%*kek9n@TxqpETelL-n&EdmjLf7H-W z;7o$vj?C+~O?1_>3KkZ66i6!9Kux7eZeXhrPGtQ3xCeUVcG*il{xGU#K!FMf`U-Ye zzcot33Tt%)ZV5X>u@GQ5kXHQMRDoS}XbXm=v94Wv3-f#PCR0Y>D1mm9$fa?HF0|w= zKC5K+{P4S0e-CD-K>x^h{j2HO2Ye}k9?6$GtnTIQHGYrE>q;y?-bedv#f>-7e_jPj zrkK~XPs%TWufF3J;0i>V3fK&nA>iqp(y51FOr_UpSbRS+U1f^G6A^o z9NKn%I{)=q?W4VXy>An(kxX4x%DwT|l9C6F(&zUWc!?`9)HXclK3wGmU+gYi5DW?m z0^_)tes&sKVhcOrIXIH zg9|Y;G}q}rGD_?9>TZa8n(&m(<>7Wn=~J47=N!&4NCjY7bmZ_0KME60VY=+t%xAgh z3Gi(BD##2%RGjM^86xbtL!Ic;jvpsz^GdIsz#Lyjj6Csc zDUDgoSaPeJ6i2bTz3~{muG*hBV+P3Kt6=4lK1twmewv6`8OCm7<}D{MaRH+Pv$jEw zwn8VzNgTE&8qn`hG+^qd>j8P0Qfp7~Ex2jO6g1ck#=@^#ZdJ<|{!uu-W!bw%gg?L8 zwD{cV*_ouS)ZU&S7n13tb0ABM`tU(_Vk~_viPaQ*FeB2@ZRvN|tLMZLqk_yce-EP( zFS~@B=MEk$O0Bd*j@pg+FCSL^==4kxzEd6C;LIMM z+A@TG)pL5KDqg1d22)MbOS!I9b)NkvZZP&U2duuZT&kNX@8H^ORvDo%lAL?w%$Y~M z6n|EmWwN&}HoeyoMyPF9`Qh_#9jA67ni8U>Y?j~z4kx9dEl9Z4)(&lO|JrHQG2gzt z6f9__FyB-;3I|5kvg^#K5fXT=w<+Afaa1bOP8My3i}S;&-$yk!F6rHvaTsD&B94m5tz!NbH1fgUmZ#zAJ5A9SNeQjPK%nK!jolstV9{(8>4-pU5xt9 z1?#vvWnyp)NjXit>7`ig*pHt}|EX2F7Rb-bPZr_lxy$_Fj*`4~_0piLe(-(p=T!Kd z|C&crdu+t7bXq|ZP%Xv^5ovrxs>kwU&CTvUS2cZl6iMw@VapE;z}gYN`V|8 zlC7e?=k(!n6W$HzJ^G1VwF9HMtd?cAZ7a>Go{3Rd zT*dD)N<}8S1m?AO z+IHOE$~nh)Bhf!$DekjW8t3ATt^HQP5+NNKN7|byvu`spw5@#SF>(n?ryV%6u9{2m z5d048d)wV^rMe9>nUk9qJ}hmnI4?uO1=+>(iuudkt@s-ZzIXPlTkc`L7&iNI_3b7D zhlMbhUO40T6Q2?!>{P9ms)p^WB?xUzuU zL8(B_Ct5l>5+4Z^MRu+?iicU2Kn#tIl z-u}FM?PoY&WJX?Y9?+xO3Oi8%#o>lAh+$CiNcK50A$F8rcWHZ)BE9Y-d^MW!LH{F^ zpm*<3Pp;g?1Unv{8<6i#IfQ+5XS2yjNccd*XNcvZ((~!TnA&knyHRkd9wSQV0vR|Q8Q9mfmyY@y(jW`}EI zqXe|s%btJkjI8EQkbk2(*XoiW;8i)S{2L~=P<2s-x+_}Pa!JAV*-z+hQHs<;TNi8+C z`&m;^CFPU6-Itk}jWKx`rL)I))SBRqrISuM4KkY-%CWKvCmAzqTRN94*YzkAiM6W# z$aGz?K1N@$vZGb8A%`j&R6`LEQMUvT{Z|!~>2+EE>26(d<{s2f*7$8$1cATl$YT;e@M0#90J-};TD7wQDN~if5{;G4uQN*H~;sKSXxUh znOhH)VDaSIF;S+*9IvPXM5d|HM_-c!m3vibi$*$rE*Q9!dzD!)%Z|yC`*&+Y*@&4+ z$6{ssb$(M3;eh^t%;m+9A)$TeXI<(W{ME{dcpT&rlMRONVP}BF%wu!IavK8IiOKS1prq30-$(vj2%AEVJMwQBIUn{m zF_H82v1f_57*fO~RDLyWL$a0dHwk|6Er>Z0-LuCN%2{{&m{7lffS)1S`UQv>5tElE z(oEF3GuhmYt*s(b%4L`kh~zp5J4VV<;+k`IyJsY)Pz~jO2h8VIHgn)vwzW(F?j zPOUt?B)zfL<+R6&i0pfT=M)NOuPw(rA!pUoM7JQ7bLTgS8@LJSSFc|Cqi+vCjs6g` zjQ;#DQ&Cqr^<$})Z&%w?#qy1%VY_ zo7npyrF5V$85@T`HC8w$K)qVzyDjMHv`qOcU@ ztdxfYZe-zB#nzSZL*`RgID3Rtuj~dm5p~AK?d6#`nv7EIGiT;ZoL#PHu6mmA zgK2H1w0|b`Y5okiTkTeP_Wa9bQ|rFfKaqLt@bm5d{2P^Eh*A8GHU>SSNF|Q=qHdo- zQ*iD^LkMyHdeHIZhZ?x8in%Umh^(c+>9%L|pO{!!=3S?QGp79jq~h?df*sN?(9qW9 zr*n?gA~m`DhulwjTT6${Je&=5$mqPb^K(l{#;Cza+-PXY4eOzLaj7u&1EmnA0PHLX z)0;k@AAhYuLTG?` zPVap$EHmQWTT)s&)}yez9%2OH+{GcwtaGXol9I;Q#PXbe=4NK&nRAct-xuIIW-~NA zTG}JyJZzlpG_~$WW~=X1oBhQ{Ije^+Y#|!|`o&d;C*AGyrgBR11m*{YX1roqW6sHs z>J%G%&dQtqSG8U zg8Cw?VgCLJl*1jnVh~JEz!s8qY|t`}kv!qn z#4NiWj@p>1kD9#DhLn_SOW?_B9aag1t@Bro0(}!K`L7SMDs``;;h^96^*AKN#CVa& zpRR}eC?W_H<>Gk7yZ}@cZ%Zp+qgt+ch3#zD^6#znOkr3G7Jwy#nM<=I@5^@q~9@ZxNBucn{cPWe6#kTi#4k58#2Bvjw1_MNynrTW^?)v)Vh7|AT8a``IYCEi_xsok! z+MGFZ+(l@c>uY=xmUiU@6r;p1P+3Jnp;oUxgyDi9c~_R+&yZmRxsEPwSmgsZ4^Ppi zKv_?aFL`d!9|9nWCWhHhB_#~$o5BOb||zrG|&Z5Rt^k)`-OsA(b_t>*Vv!+y^Fe`2kZNI5VW^^e16MscP3(j z)kQC2W3Q;!8d#ln=n*3q|PIPSPj_--ufm)aHL0JP_4lN7e4J##p4^h9Vv@?LukZC6 zcEDD_40;w?bk2p`q8_lxp3{|px;F0LzaG<_I^`;?pBs!s;3lNm5|I};n3CA>@Vcp( zguKu1-3kR=@>noO@9R#rYu?-2JY)|wqlXa}VqwPW%SL@LRt0x9;InOWTsSZ-|JG}G z<#4Zk}z`o1g#&zJ=Ug&V@(^LqkQY;&&JUhIs<`F9``1BSP2OY}S2$ z{@ik?nPbSJcpAhP>gUmLPVK|akrE#M{_G-K7u8d(CESV@oyyKk18g{XWlfJi;zMyF zw^hPjK@vl%N*ipZz{FQL{#k1>Q8%m}FK!_h7iydC>8V#P<`T~gcbZ)S!b3z&n8A{YmWvCG1C`6I5GEIm;lw>%Dq>_Xrj`64t z9U=29eCs)S-|zeG@7~|--g3@=c%J?2z1G@mD+(AiegTeKW&#UZMn4?Je&PSj&e75g14t@SA-OqJKFVJ9oP+)_7-Q!ZqE zjcaU`G#pgw4x`b`QI_eNnl6g6a=)s~0K7ql|AO0Y{^{s1AlJ&Sqv~)tkvUC(x*-0_ z9ts*yFM{vP)*SC~f*S@0_t%?!uI+Ssyh2p;nsy4)``;N& zSm#FDgp>#JGR@Yg=_0Q<9~C~5BP?0+I~b2BD^zObPj{pip}Sg z$f8{%VH>NF&Us45yZ+J9O&Ht&RoS~qu@wPEeLLp(K06_W86j;`C$UB_4HcFcBY6re z^;j8IplQy%W;TV5{!NnEDusnqs!m3-1`M8{gTvbGV0QSRqZ$3D?zVhxG?jQ6YacRs z07vBIQ^Ig^qYe&0bOm+$TqK<6d+0CRPo<+r@YT3TWKlaUChbtp4`ho7on=ok}{P3x5g2&W!`ut*gUEP8L zv#Lo~cvlm>E0idnUN6)71tZB3XmAeQ-DqFWFlOt~_4KL}6)EvIcE9WIY%nyR$g5*^ z0W$%~+UtofG7P1O=&)e);_Ct+Wt*lJJtcis6OuEa-Z~LkBpbG%2!#8Yzx<%Ail!c3G%zN?euiCwFSNNo5M+4A?Ep= zWxZ)_VzSOTItn1Ebvbw7ZbZa4={{mHQD1+8L5JHk=);3URoz{qZJQi_ZVo8VUWIw^ ze7q$ePf#o#RvHq0(}xd4B97ixloT36{pws2B-l1*3tCKFBfFvOB2qb^(?n##V505| zNnSZ=H;iM*USAbX4rD{JD(rSiu3r7B>q5}DGR0-*vBpD=j~1^cH@x{Q`>>99ws7wb(!P3Ki?$0#2KPFM?*#jLEYX(r1CMXBlO zBTow7dBss-nDZnFaM%kH%q2z@FvSYN2f%?zp$e{fztzJ;on zFI~Lo?o}TO_448MOw%}Y-Nx0H^qiJcQo=}~E+>wDL?ARI-y3Q09lYNPziZOk3j}Jg zeB3!}>}1eT5J(r$kYCK4osd4V+2ktNhA&4K=#MGmepjk;q`=s z-n?1MG4OVSU4TKV>8;)W0G_?EA47XK844KwTZsP|w{6bBi_35ilH^F{;y0YShDV4c z%Gg@WaBLr(fr#-fzfa#hh&MnH9`^iH3s-`{Zk6*@n1^^MuV5|mz}A*Oj3Ml0i+f!M zM!rIm1GRoptPDPH{GI~YcF7o|NycX%9on|1hrt7(77` zo@HR~tHr-~!wl-{vt<8NEt)({;6xPZ>OpTLD(v3q!AEGVs`-h5K0imR%uG!~(GbEY z5?!(4U}|It6xQ50(t5)lHrR)cM%A9fseRvN_iG5n(A2f*iu}VCy~y0WPsD2m(&T&# ze=DP*QJKT8%YE;A&E)^7JJE;W9*z+a7$4zdR%K{xyi!Uqq=T+1;qMm0z9)FZ-@xKy zq?KgqK{bm(cFPdjNZ&QOyEzOi5f%l6g@ZsThAT1-Wffp>#S*U!a;ktXF%NS^hX|5R zj1x#cJd)qgsnRs~h+S0vHsEeO7Ul~20zq1{h*5R{pfQoOb3DMKM%DT1xfCi;ufj`2 z3xS2>0rPER(TcN1R#pI! z!!OM{%Xlm4{v>%bGe56fcS#&Isywp>BqS;I$C=k8Bp)l-Zz6H8sL@fBN!ee!!{uu9I8$^J@>A4j~(+MVH|r9RXZE1>SBNg`&jJ{LI}c5FLT=` zg{6^Y^RtXYaVh9jki=^{m(}Q9AirbB16c2&a!yM-|6$lRvw>{CR#k|izLM6-A z+4Dm~?A2K+kv5zM`5pS18V^Z3&*nxr|BRyE0vMvx{cF#0lsfs8mBZ~CAG-%{^R`y| zZBeDjd8gHP+e3`uek>Ac7;+kj2V`%g+}QkafMq_)^tdmie39QOi+pCJ{35^QL+>f|eJo9}h? z3K1jfwXM+sNe99g)`<|O&11)EZqU`?s{tOM_<48i`lm=WA*>?HgqUL?tJ7Ywdwpb? zcPLPEcP|}O+o~JAd7?O>2SspTGy51-JF*w&>Js& z>4(rrtV__DR^gfd{Q2juv>)k1L7s+JO@A&XXD{{!T8f@1#!)?+jxFR+L1O_&_C0Ym z9}zspL`un<$!B7sq7^ii!iNt}89%ACJpD!QZbkY%&?7v_odonJ2noie_c{R+fdxo) z?>1>k3(2uXqqZWS+fD=j*f{=MMIn}tK_?HvZe}yQYJ`P5^yL@nunwVyL5pcz2VGXe z|05@Rfr>YCa=*+Sy*0l~UoBy;MHXe$8aJ zk1XYEa(+)`z3AvnD?(jT_4~;JnqR#7@Xj+z6xfc!DEDX_FvyhziL?|uoL(gBzOFhF z;Ti`!h8lCHKLDOB-O#vjedNKuVih^LCD6DnZ?=D0dk&g0@9C!aPMI8oC8ond`6?8z z^>hj}^coHhRL|kNy~EfeV3Y-?Jl17qgC|0!(id+?AMb$(#@c#=1M60U2Y5lCfdWE8 zfuIBJU}W^cJMrbqx|Xw6(s75*oC}ysP8<0q|79tHcTIP6&p(Q*UoqZGB-iznQ|Nzx#}@dXk5InkYiRZ z97bJ)p9jd$|6{#Q6j}Cn2kg?c6utjDnUFp$lgMLv$W-lSYbIJ_)CR zYsKbw>s$&!|C#!tOeXr>cZ2Q0WtQsDm5D1X5yk2mjn+fyd~gm>&B(7l<#CI{rIa>)Z-aJvq2aA^wQ(v@Z3`n=1$69C|utc zS=w5F3WbcIeRQ56`(X&aCDJd+PFxE^N^$u13bxLHcO`rVZWi|O>DvzKxsn(Re z`ku=d9_d}ps-esF2)l;+!fgo!$3ewHN#CTWuUxdE(K~^l%q-8j&S8V z5CC0W@Gg)K7@gp%`d{%DWnoBE9ZQuI( zjxFKKEPB;`KN>He@L9@}(c(;yMSEQLvZU+kYij0&F~Osp(H|xDJ6L*n*=SO8`*uwT zH%F>9t+Q+Vn@8ElTZq5bqwf_a@dwdRAsnz5hi$&jt~03sCmd_HL##@44>~$RR<(mT z=uPuAN628Z$g(~XnV|j!n%tkOVg+pB*`EE=tlo#8hWH>lGUuiURGV<}i98rur_Qx_4||EPC3a?{ z*<$^Ao-7rQT{v>lg3!EGY{PCqBRD_S-AyqyG3h$yS(dw`QS4V^ymZ9husWC%tRZLR znU{?k0-85Kn;J!opc$JT_f~Wz^=*qejHgjb>Ndb0@b1PSIL{9`KNJAmJV;8iC@#g6 zHz6t2v%vB}wzv-DEL5DxRQ$ z#`K1$K7RFDM>|!o;RNv`EZ&nMk86MxLo+rK_bf5_q64CX4+|6l4UW_c9vxM*+Hj-V=7P|<XjsPWm~h+jnMFizsq$Ta~%@h+Gl(`1Pmuq>f)Xmrzw;~ z?KM=Sy$JN2w`X=t`1KC@3f!8(?5({ylbOqNwPIZYrF()WUEjBGG}$0^G0sP}+6>+9 zu!>1M^3VD~>nYOAghS=^>1RPcaf@d%*_yt%XGhM0P=u}LGh~J^b6WsFdmqrq+Xtn} zpX21(PoX4qSiC|mV<~rpJL8BC71CJ2*jss>x;Z0z$bD$h5ic1m#0G0h z@wF}?jJDAm7@y2habBg((y%6JD-rh%^%*!hMZS@bnKNgV#6gX{$G4%H3j|8A`QzVQ z5@H1WQWso-5J=kc(J}^wj4Epo#YT?!QxjujLAzQPpihvFVWxxY26dbd$hX|K{G`Js zD5+ZNI(Kbbu)ei5>%|07C1W~^8_cbU_E$gEfID6WfIbfAwjV#P`*=r;M?xh++Ud0| zff_tRvm!dUzQJ!5PA>b*%ow+ADHtojRM2zn>O&Ld)%{7|O#5XvZbS`A3YsL95g`2?(QBs@1jKjF1dM2xO(mm1ay%q&-IEakjdAx z(d2f;nGyt1$h+sj@_O(I1fHZ6MW$$4bgrrymtD-LY5t|XrR(d%w<0|UGMnx34lwxX@k`N>X@GR0JFiI6ckUI2^#Kl z3JULOYm6~$)$Cg{dRwrRiL)U&#}LC4DF-aSk#2nmW65M+(%6ncB7-|!CtFapOVvQhUQ4U$-hZ)&aU%_ z1NDEP@{zEFitDjk0%=7>tyKOo0NG+qhhYB5C76Rj*dRNEy#H!XLvaTJ?AIWX->r$z z9d`4Zo(>KJXur7ToFg*HVsqKCEZf&!whj(~7*;D8!;j(z@o&+9j5c|RUqsAuh9S^p#lV#W36#rQ~^%2rB!szl0 zkTDb(bjRl0Dnj z)>p{yuwKMh)oJOIl=Sb8l^1Q)R{57mOly??jI~L1cX+6UYjE)HGRblL=GQ@AxHuem zUv|;ddB(PHRl9ERJO+}GG1Ufah!ny=wRsi@um*B}U82#LA5VT3Ly3!I6DJWy@$PRC zQ6r|Li6soX9aC!ZVllinBXMLvZC$Ii@kg4VA9XrKs9$e@w;Uq^o<`j zl|Rp??Es?;qM(D$wV1!u2_gwJd)x&T%<86LyukO`2vm8xnNKsEWD5=K!7RM}(r zRj(H3*DalpFrX(C_oDnVy1RGuWEY^?HO!yVu_`K;o34hWobx$$EYkc)FmS%;ck?CIBsO;;M5m~b?GI^S9-O6q2!sYPx6RezPz zFYBvrBL@u4vvq#ow{T!SvZhMdI>>k0_6Eu2cK-UcJocn03V%GUM9NYPFZ?iYsuNMm z)7&g{Mup7`O!u8@Uf1oN$5TKrwH`+Kn;>Mjg@!muY&Bq)&DP7>+NPGaswpX5pGB5m z+3c7Q(SbnhkAhl`81&uS`_irvUr{u~u+ zoA(&3#{^`nRifL=MHtgKJw=DU<$*&y$lnCrCWm7dcjfpCXBUemYd zzc}t2tFF`jqA%m+hyeuJXXOPPCU_J%_(1L*zJBZ#U)@O!>AxloU^{AzPFBx_C zW>6%$L8sZjy*$EbD&IEcbHT7C^fBOC`9Rd*M8jyFhE_H2lqI!#NOc|svp4=>L{#u3 zq)N2CD8CA<5Y`iJwq~JJ-t|wIr*!=IGSnRp4N~31ZL^H2jfbWmeqBF3nzGc_^=p)< ziTsKF+FV-X1O8UpwV9^YL3&x(yp&ej&faUHrc1>OtL}hnM|B+HGhOyQ0`1<=XfjNB z!0gL9vSj#5HA0urb8_(*Lc5Aa6tn~Et74rkvy2I>T6zU=FcJ4a(8FNvPjWKWB@=ki z6?DlsCKOF~sG9NGjwvm{OAug3SUFdao-iE1*y>u=$nEr6eSn)3N;p8)JRa47f?XJv z0E!wJTK*PP+gZ5J?b;{1FKsaUyGwmE>sj#X*OS>dr*579V0)dB8(gADM;XvRoiN$| zIg{R3{n*6j{6OsMZ>iPQdPq-bN6XnF^0RXLlF@DDx7!sl;et|2epdX8rZ|OI7tscp zhKzPf+E{neTm=zryUCZ!ql*eB$<&^k1!QGwQzA5mNGXaU5iu97$Mf{_z3IPz@4 zHB!%oeymIIp$A58uvZ^#I1d4b*Z5nmOZNFUOr|d7yALfet16_;`-uhmIQ*nvOV69E zREx2^655^vIy(Hq0pEVzAiZ!9GXR43tU7CBvj_6s(#c?XJW%v@kV+bg@F1UbZi%+p z$d(%pxEjm|xXwO}|KGvo6|-??E&smUw55i-OJyC)!|2nc0o~Ddc--$Ni_G$!I_xtN z+Xqi6=Qb3Xd<+Z-05{RQ>lZLhSeJfiU!OlK{L?*te8;awr&W01tKBCO zR4GC;SkA^x8e9@<*kPkN5GXd1G*r%RA*tgZF#BlZMlKM;`Aauq3<4nOgbjz5TXXg& zrNxbzeW#BV8G6Vnn3v+MJab`M@iyn(7mD|7Ti|o2tM&S%`qFE@5AJVB zZ8+xHBduU?=Gr$^`?`2+2z=Od$#rxY#ES{mqhBkM(Dc+p+ZHC;ntOw~d%qKNLSbN< zD%5G6=Q!}@2#$2Gl|n#!dv-kbR5OG(5P-q8OUh!6zcEq)lh2+fD1%wYeT$J$aiG3M%*-!^%|vxw-7Xe)Vac}(I`JZW8_a(DnvQjRX{j}{E#2sI z*JFjeM=99B7pY$TGZ(-4#uo+Tt!!2Lo2b6*$5kPH19q&TmSX7yrW>Aof_7?Uvgm4g z?Dg)Qh}*OpHSd@RYSod5nJEgL?6~^ryUQD^7PQPvafX||tF7ENYI|t9IeZ^y`sB`z zGw3_8O(z8#0e&HkqxeOGpdl9N#CN8;Y7_DzZg$Z$8T)_rDDEL!J(3`@0s#ydA%FbK zp#DGUqZ0~zmW|0zKcBI>z?_O)n%1pdx0r9YK=(`ovxBX6>FTKjIZ*Dp7ni44VIj;|K=Tx@NKXcFf ze!QMM5#04#r>LvMcE%;U<7fTdc|u#KMFZJ%NxbWg45==AwV$?uDEQ+s&z(?%0f19}p;7pZTap)aI^?L8`tZT^;Sr z#LF7|Y`iWoR4$|6>^#a6VhOekznc; z57v60@y0J(TNAu@TwV}4`coh&DG6c)^q4L^8Jq>}R)YNV3+R`V+_B@f{M389T}b3T znj2g^Kk*@_sL$$`llI!#pJ%#CrevVKWlgAs#ZubJlbZx8LQ9|#s0_r0l;xGoVZK`K z)m-FTWH@>U$uv+V^Wn}~xb7{ULdy}?VzzogqUK}rv|nmL+dO{duTJ+fp$9NDq~~)A zuAi*S0FTS%KOgc7CcP592 zFL0@^8;##+MN7}f(@V6ay9-_18CSU@aa!+1TP|ZB8r4yu2|#KdWu?M62CgI&x!UF+ z;IW7169nF$3qD5wMwg0f7N3t^7GoOtId1Xapa_eCu#{3m;D1 z4&R19x)KD-l_n_o{Mkw3`x^+ByBru0(i0IDU`9MMxUcR-@+wWFsCQ_pcY1vb9+%KbVV8|*gd?hDxB@WRsL1n%zA8drFjZl;G zG0Q6Aa*&7=&)vPyr#A2-i~6u5?tbRN#PKI7DV*rpPO0f%@U`b6m{qS{&sJhr3?mR2 z03+$^Z+5A||4T&slcZ;UZz8kK{PkstvCaz6DAj*Hc;ureDjvH zRXBYF*S`9C)K>WQtF#!`!xvm#d47bj+S)KQ&}e9IZxk8i2ILPIgf{IR43Azte`+{4 zC-$k>?{B{fIYbX2LIdRFERoHRTkQ{vZG8G)ND}9kLpXqx8jmTrcY{9^xa=6s6_ZKy z-D6X|zP-b3uXj4htqe6c5(Lld_WN3$&xZGyiqsuJJ-_G&D$D+n;o$+9tO4E{wX#Py?dBsV;H_ zdNIu=s3lx30UWi%fXTW@UPIMfGio6A1+bUD4&M;z`O8%uDx>*LKkx;pnuDj~BHJx6 zf|9gE7cf9HV~B^)1$jRK!`)?QuA_by8^hf}x3p)d7aVwyFB@ilA8V9mfWC$Nkw#n9 zBfG#rK(B#ij=mX<`^xBUz@8t_jzzcl;*~44G~0tHMpA-=JV{;(Bmp{HUVi?NUF(TB z#7X2t)Ue`%Pw+m1I3Em5%@_^^D|WH0{yPyOP~>0)pskO0UXK=6L?pcAq6r{@NszIPC}F zht%If_+(iAR2P{%_qucYHrLC9r-1n`UL4L3p9>lwjQQjEfrrnW5?!tX1B2QmD|{_9 zoO9R#=i{m{CYh{_>>ZP2CzTIwyI+B|hK^uw@4*@aDvS`M$_J*W;1_dF=AfVk1~kBx zpo(UT-XM=!pU?CbCA<{;1lVWRGhx5yUS!D*Q*&X*Q5`CjB$FUP3f6YIuf%8M8bbRMd8`aK@Yz;+k1oI$+@vTigt;2nT<`!yStQ_`@aKE1cHIZ0!iTjAYHB=RT`6~39cM(Wf!(#n z4k&UYKvgv|BRH(GjImVVl>hlG-4a;ViKw`mFfx(~va|v-HGBb5dZG-6&ggL%o<=i^ zeRygtLkA{|A?`q~2iY7XwaI?Th$Wv|bqEU}v1SQvS{?HckifSr@IhRJ5a;@|XvAb>#TmGH z?g$fCtMn|`&dadvJw$4)=4@bPxxiQ!RO)++ie50Y>t2a@% zN^ajCIjU59E(_YEe7Y;j6?h6jnsrQ+n3AFbMeTf)WGxbYvsp{EBFvc~=6h-1(n-X8 z7Lu4tP%O&}3MToV1B7Zv>zmy!oyiqZR#1l7EYTFa1_~F-8$YXtv-BsB+Tr7!&l5VC zOXBqG64xx#_myDBfh7QMSwlf(!$O4nNY1(eXd^(1{Zpg?VwpLN{{nSmQph8Gz@oGSSAXG1E-W7(RC3GFpPedX^IeDD`y^ zQwuO{>&Yb@!AHM;dqEy=ZcJZCq<4_SR!D{YY$Z& z;1Xw_gl&q;cNQ4ByDK7KViaZ=hF}Iwuiyp(U`i5pf#+=iGI3fG!I;*g&j10W5q8<4 zo?Dtn*g}bBmWO2Iu?=`s5LiUqxdV5c^%K^T_}Le;r^v1U-JK$e&Tm-3Q2-*4I%~`* z`+u~AH8xb;s+2AmLBfcI5S^9eg#A6cvZ9p#o3`?yn#*MHiQ%ky+xh<1Cs;*(`t->t zW$tnzArSh4sG%@DT42fr`MHtV?D8>k%t|@FaT$V{nNI#oht@EJ>*`iD2?jX**C0RG zoBXEcRrV^5T7JJ`0mN39FVDe@3Xi8nx-ja>J*lnu!}8#>20Lh7#b`-@`hbQ4K3)yg zk@3Gvum=ohAC=UR^dbn+<jFP0EP$?1(}IS$v1{zWns>?2Y@A?m~s$;JhbSi zkSi~fB~SXn?AXnC|uYp%~! zUWY@#pC3WSTnd_}x}ia_FBCHsV{@I`uXi}$VE*$3hYmnu0`qR?AFB*fhkKtIbh$x6 z(cy6Yzkecx;_50dO(|49on<`Jv#NFMoqQpB)Th$$ZQ=Mq4mze`BDiS!M*g`2EC6Mg zr2f?MebrtbeIT7uR5-FKa;EBB*0d?k1y2x>uF|G?^Z#=V{sKZ63O8eliGf3)Dy~H` cxo6b&du&SH@jdhQ9Q<`qQ(Gfl-Q4eg02i7zmjD0& diff --git a/keyboards/ergodox/keymaps/bepo/keymap.c b/keyboards/ergodox/keymaps/bepo/keymap.c index ae8047ab59..c1a8ae21d9 100644 --- a/keyboards/ergodox/keymaps/bepo/keymap.c +++ b/keyboards/ergodox/keymaps/bepo/keymap.c @@ -201,18 +201,18 @@ KC_TRNS, KC_TRNS, KC_NO), /* Keymap 5: numeric layer, sends keypad codes * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | + | - | / | * | | + * | | | | | | | | | | | NumLo| / | * | - | | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | | | | | | 7 | 8 | 9 | | | + * | | | | | | | | | | | 7 | 8 | 9 | + | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | |------| |------| | 4 | 5 | 6 | | | + * | | | | | | |------| |------| | 4 | 5 | 6 | + | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | 1 | 2 | 3 | | | + * | | | | | | | | | | | 1 | 2 | 3 | Enter| | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | | | | | | | | | | | | | 0 | 00 | . | | | + * | | | | | | | | | | | | | 0 | 00 | . | Enter| | * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' * | | | | | | | | - * | | |------| |------| | Enter| + * | | |------| |------| | | * | | | | | | | | * `--------------------' `--------------------' */ @@ -227,14 +227,14 @@ KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, // Right hand - KC_NO, KC_NO, KC_KP_PLUS, KC_KP_MINUS, KC_KP_SLASH, KC_KP_ASTERISK, KC_NO, - KC_NO, KC_NO, KC_KP_7, KC_KP_8, KC_KP_9, KC_NO, KC_NO, - KC_NO, KC_KP_4, KC_KP_5, KC_KP_6, KC_NO, KC_NO, - KC_NO, KC_NO, KC_KP_1, KC_KP_2, KC_KP_3, KC_NO, KC_NO, - KC_KP_0, M(KP_00), KC_KP_COMMA, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, KC_NO, + KC_NO, KC_NO, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, KC_NO, + KC_NO, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_PLUS, KC_NO, + KC_NO, KC_NO, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, KC_NO, + KC_KP_0, M(KP_00), KC_KP_COMMA, KC_KP_ENTER, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, -KC_TRNS, KC_TRNS, KC_KP_ENTER) +KC_TRNS, KC_TRNS, KC_TRNS) }; const uint16_t PROGMEM fn_actions[] = { From 3f1fca2eb8078cdfbf576d6d4168de8e6ae1c2f6 Mon Sep 17 00:00:00 2001 From: Olivier Date: Mon, 28 Nov 2016 11:21:23 +0100 Subject: [PATCH 078/124] Adjust comment. --- keyboards/ergodox/keymaps/bepo/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/ergodox/keymaps/bepo/readme.md b/keyboards/ergodox/keymaps/bepo/readme.md index 207b675715..51a5069851 100644 --- a/keyboards/ergodox/keymaps/bepo/readme.md +++ b/keyboards/ergodox/keymaps/bepo/readme.md @@ -23,7 +23,7 @@ La touche "Tab" est placée comme sur la TypeMatrix 2020. Meilleure symétrie et accessibilité que la TypeMatrix 2030 : les touches "W" et "%" ont dû être déplacées du côté gauche en raison du nombre de touches de l'ErgoDox, mais l'auriculaire droit ne gère maintenant que deux colonnes de touches au lieu de trois. La touche "Ê" redevient accessible sur la même rangée que les autres lettres, comme sur un clavier classique en disposition bépo. Les lettres, chiffres et symboles sont tous regroupés sur 4 lignes et 6 colonnes pour chaque main, et la première rangée de lettres à la main gauche conserve une identité visuelle "BÉPO". -Touche de fonction permettant de saisir les touches F1 à F12, les touches F1 à F10 sont placées de façon logique par rapport aux chiffres 1 à 0. Cette même touche permet l'accès aux touches directionnelles sans déplacer la main droite. Les touches "Home" et "End" sont placées de la même façon que sur une TypeMatrix 2030 par rapport aux touches directionnelles. Les touches "Page Up" et "Page Down" sont également accessibles facilement sans déplacer la main droite. Les fonctions "VolUp" et "VolDown" sont placées comme sur la TypeMatrix 2030, avec la fonction "Mute" juste au dessus. Les fonctions "Undo", "Cut", "Copy" et "Paste" sont placées côte à côte comme elles le seraient sur un clavier QWERTY en combinaison avec la touche "Ctrl" (à l'emplacement des lettres "Z", "X", "C" et "V"). Par rapport au layout "SpaceFN", l'utilisation d'une touche de fonction dédiée au pouce permet de ne pas ajouter de latence, et la touche espace reste compatible avec les jeux (action au moment de l'appui et possibilité d'appui long). +Touche de fonction permettant de saisir les touches F1 à F12, les touches F1 à F10 sont placées de façon logique par rapport aux chiffres 1 à 0. Cette même touche permet l'accès aux touches directionnelles sans déplacer la main droite et d'effectuer des actions souris avec uniquement la main gauche. Les touches "Home" et "End" sont placées de la même façon que sur une TypeMatrix 2030 par rapport aux touches directionnelles. Les touches "Page Up" et "Page Down" sont également accessibles facilement sans déplacer la main droite. Les fonctions "VolUp" et "VolDown" sont placées comme sur la TypeMatrix 2030, avec la fonction "Mute" juste au dessus. Les fonctions "Undo", "Cut", "Copy" et "Paste" sont placées côte à côte comme elles le seraient sur un clavier QWERTY en combinaison avec la touche "Ctrl" (à l'emplacement des lettres "Z", "X", "C" et "V"). Par rapport au layout "SpaceFN", l'utilisation d'une touche de fonction dédiée au pouce permet de ne pas ajouter de latence, et la touche espace reste compatible avec les jeux (action au moment de l'appui et possibilité d'appui long). Touche de fonction permettant l'accès au pavé numérique comme sur la TypeMatrix 2030, mais sans avoir à déplacer la main droite : avec les doigts sur la rangée de repos, possibilité de saisir les chiffres "4", "5" et "6" comme sur un pavé numérique classique. Le double "0" de la TypeMatrix a été conservé, et gagne une possibilité de répétition en simples "0". From 2d0ada01902a0103dc4f4f54a416f0666c641b5b Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Mon, 28 Nov 2016 07:55:02 -0500 Subject: [PATCH 079/124] Pulls LED config into common config for EZ --- keyboards/ergodox/ez/config.h | 11 +++++++++++ keyboards/ergodox/keymaps/erez_experimental/config.h | 10 ---------- 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index 67a856e511..0b7e8b2ee1 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -45,6 +45,17 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 +/* ws2812 RGB LED */ +#define RGB_DI_PIN D7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 15 // Number of LEDs +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 255 +#define RGBLIGHT_VAL_STEP 12 + +#define RGB_MIDI +#define RGBW_BB_TWI + /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ergodox/keymaps/erez_experimental/config.h b/keyboards/ergodox/keymaps/erez_experimental/config.h index fbd12ab797..4da18c65aa 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/config.h +++ b/keyboards/ergodox/keymaps/erez_experimental/config.h @@ -9,15 +9,5 @@ #undef LEADER_TIMEOUT #define LEADER_TIMEOUT 300 -/* ws2812 RGB LED */ -#define RGB_DI_PIN D7 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 15 // Number of LEDs -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 255 -#define RGBLIGHT_VAL_STEP 12 - -#define RGB_MIDI -#define RGBW_BB_TWI #endif From 9caf866618840ca38f4ceb1166ad679174c752c3 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Mon, 28 Nov 2016 07:59:01 -0500 Subject: [PATCH 080/124] Tweaks EZ Makefile --- keyboards/ergodox/ez/Makefile | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile index 191c6bb664..9b6121e2c2 100644 --- a/keyboards/ergodox/ez/Makefile +++ b/keyboards/ergodox/ez/Makefile @@ -1,3 +1,8 @@ +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +COMMAND_ENABLE = no # Commands for debug and configuration +RGBLIGHT_ENABLE ?= yes +MIDI_ENABLE ?= yes + ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif \ No newline at end of file +endif From d2b6438e391743544d437ca8c2998de6ab631894 Mon Sep 17 00:00:00 2001 From: Olivier Date: Mon, 28 Nov 2016 14:10:31 +0100 Subject: [PATCH 081/124] A little cleanup, add some comments, change others. --- keyboards/ergodox/keymaps/bepo/keymap.c | 42 ++++++++++--------------- 1 file changed, 16 insertions(+), 26 deletions(-) diff --git a/keyboards/ergodox/keymaps/bepo/keymap.c b/keyboards/ergodox/keymaps/bepo/keymap.c index c1a8ae21d9..8f068e238d 100644 --- a/keyboards/ergodox/keymaps/bepo/keymap.c +++ b/keyboards/ergodox/keymaps/bepo/keymap.c @@ -1,19 +1,19 @@ #include "ergodox.h" -#include "debug.h" -#include "action_layer.h" #include "keymap_bepo.h" -#define BASE 0 // default layer -#define QWER 1 // qwerty compat layer -#define SQWER 2 // shifted qwerty compat layer -#define AQWER 3 // alted qwerty compat layer -#define FNAV 4 // function / navigation keys -#define NUM 5 // numeric keypad keys +// keymaps +#define BASE 0 // default layer, for bepo compatible systems +#define QWER 1 // bepo to qwerty base compat layer, for qwerty systems +#define SQWER 2 // bepo with shift key to qwerty compat layer +#define AQWER 3 // bepo with altgr key to qwerty compat layer +#define FNAV 4 // function / navigation / mouse layer +#define NUM 5 // numeric keypad layer -#define KP_00 0 +// macros +#define KP_00 0 // keypad "double 0" const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap 0: Base layer +/* Keymap 0: default layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | $ | " | < | > | ( | ) |Delete| |ScroLo| @ | + | - | / | * | = | @@ -50,7 +50,7 @@ KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, DF(QWER), DF(BASE), MO(NUM), MO(FNAV), KC_RSHIFT, KC_ENTER), -/* Keymap 1: QWERTY system compatibility layer +/* Keymap 1: bepo to qwerty base compat layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | $ | " | < | > | ( | ) |Delete| |ScroLo| @ | + | - | / | * | = | @@ -87,7 +87,7 @@ KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, DF(QWER), DF(BASE), MO(NUM), MO(FNAV), MO(SQWER), KC_ENTER), -/* Keymap 2: QWERTY shifted system compatibility layer +/* Keymap 2: bepo with shift key to qwerty compat layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | # | 1 | 2 | 3 | 4 | 5 |Delete| |ScroLo| 6 | 7 | 8 | 9 | 0 | = | @@ -124,7 +124,7 @@ S(KC_ESC), S(KC_INS), S(KC_LGUI), S(KC_LCTL), S(KC_LALT), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -/* Keymap 3: QWERTY alted system compatibility layer +/* Keymap 3: bepo with altgr key to qwerty compat layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | $ | " | < | > | [ | ] |Delete| |ScroLo| @ | + | - | / | * | = | @@ -161,7 +161,7 @@ KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, KC_TRNS, KC_TRNS, MO(NUM), MO(FNAV), MO(SQWER), KC_ENTER), -/* Keymap 4: function / navigation layer +/* Keymap 4: function / navigation / mouse layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | | F1 | F2 | F3 | F4 | F5 |VolMut| | | F6 | F7 | F8 | F9 | F10 | | @@ -198,7 +198,7 @@ KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO), -/* Keymap 5: numeric layer, sends keypad codes +/* Keymap 5: numeric keypad layer, sends keypad codes * * ,--------------------------------------------------. ,--------------------------------------------------. * | | | | | | | | | | | NumLo| / | * | - | | @@ -237,12 +237,10 @@ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; -const uint16_t PROGMEM fn_actions[] = { -}; - const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { switch(id) { + // keypad "double 0" case KP_00: if (record->event.pressed) { return MACRO( T(KP_0), D(KP_0), END ); @@ -253,11 +251,3 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) } return MACRO_NONE; }; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { -}; From 84735836e309fe9e2c45ed991a58820ae2bb9123 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Mon, 28 Nov 2016 08:13:32 -0500 Subject: [PATCH 082/124] Tweaks position of TOG not to conflict with MO --- keyboards/ergodox/keymaps/erez_experimental/keymap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/ergodox/keymaps/erez_experimental/keymap.c b/keyboards/ergodox/keymaps/erez_experimental/keymap.c index 0c0e3c4e39..2963c40e31 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/keymap.c +++ b/keyboards/ergodox/keymaps/erez_experimental/keymap.c @@ -71,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | |NxtTab|PrvTab| | | | | | | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. - * | | | | | | + * | | | |TOG | * ,------|------|------| |------+------+------. * |VAI |VAD |HUI | |SAI |TOG |MOD | * | | |------| |------| | | @@ -95,9 +95,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_AMPR, KC_UNDS, KC_MINS, CM_SCLN, KC_PLUS, KC_TRNS, KC_TRNS, KC_PIPE, KC_AT, KC_EQL, KC_PERC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, + RGB_TOG, KC_TRNS, RGB_SAI, - RGB_SAD, RGB_TOG, RGB_MOD + RGB_SAD, KC_TRNS, RGB_MOD ), /* Keymap 2: Media and mouse keys * From f02eccbb29ee6a8cf421895dcef2e55a76c1bdcb Mon Sep 17 00:00:00 2001 From: Olivier Date: Mon, 28 Nov 2016 14:16:42 +0100 Subject: [PATCH 083/124] Change layer names (cosmetic change) and reorder them so that the "shift" layer can be accessed from the "alt" layer when in QWERTY compat mode. --- keyboards/ergodox/keymaps/bepo/keymap.c | 124 ++++++++++++------------ 1 file changed, 62 insertions(+), 62 deletions(-) diff --git a/keyboards/ergodox/keymaps/bepo/keymap.c b/keyboards/ergodox/keymaps/bepo/keymap.c index 8f068e238d..c19ab0d48d 100644 --- a/keyboards/ergodox/keymaps/bepo/keymap.c +++ b/keyboards/ergodox/keymaps/bepo/keymap.c @@ -2,12 +2,12 @@ #include "keymap_bepo.h" // keymaps -#define BASE 0 // default layer, for bepo compatible systems -#define QWER 1 // bepo to qwerty base compat layer, for qwerty systems -#define SQWER 2 // bepo with shift key to qwerty compat layer -#define AQWER 3 // bepo with altgr key to qwerty compat layer +#define BEPO 0 // default layer, for bepo compatible systems +#define QW_B 1 // bepo to qwerty base compat layer, for qwerty systems +#define QW_A 2 // bepo with altgr key to qwerty compat layer +#define QW_S 3 // bepo with shift key to qwerty compat layer #define FNAV 4 // function / navigation / mouse layer -#define NUM 5 // numeric keypad layer +#define NUMK 5 // numeric keypad layer // macros #define KP_00 0 // keypad "double 0" @@ -26,20 +26,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | L_Num| | | + * | | |L_NumK| |L_NumK| | | * | Space|LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' */ -[BASE] = KEYMAP( +[BEPO] = KEYMAP( // Left hand BP_DOLLAR, BP_DQOT, BP_LGIL, BP_RGIL, BP_LPRN, BP_RPRN, KC_DEL, BP_PERCENT, BP_B, BP_E_ACUTE, BP_P, BP_O, BP_E_GRAVE, KC_BSPC, BP_W, BP_A, BP_U, BP_I, BP_E, BP_COMMA, BP_ECRC, BP_A_GRAVE, BP_Y, BP_X, BP_DOT, BP_K, KC_TAB, KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, - DF(BASE), DF(QWER), - MO(NUM), + DF(BEPO), DF(QW_B), + MO(NUMK), KC_SPC, KC_LSHIFT, MO(FNAV), // Right hand KC_SLCK, BP_AT, BP_PLUS, BP_MINUS, BP_SLASH, BP_ASTR, BP_EQUAL, @@ -47,8 +47,8 @@ KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, KC_NUMLOCK, BP_APOS, BP_Q, BP_G, BP_H, BP_F, BP_CCED, BP_ALGR, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -DF(QWER), DF(BASE), -MO(NUM), +DF(QW_B), DF(BEPO), +MO(NUMK), MO(FNAV), KC_RSHIFT, KC_ENTER), /* Keymap 1: bepo to qwerty base compat layer * @@ -63,31 +63,68 @@ MO(FNAV), KC_RSHIFT, KC_ENTER), * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | L_Num| | | + * | | |L_NumK| |L_NumK| | | * | Space|LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' */ -[QWER] = KEYMAP( +[QW_B] = KEYMAP( // Left hand KC_DOLLAR, S(KC_QUOT), S(KC_COMM), S(KC_DOT), KC_LPRN, KC_RPRN, KC_DEL, KC_PERCENT, KC_B, KC_E, KC_P, KC_O, KC_E, KC_BSPC, KC_W, KC_A, KC_U, KC_I, KC_E, KC_COMMA, KC_E, KC_A, KC_Y, KC_X, KC_DOT, KC_K, KC_TAB, KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, - DF(BASE), DF(QWER), - MO(NUM), - KC_SPC, MO(SQWER), MO(FNAV), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_SPC, MO(QW_S), KC_TRNS, +// Right hand + KC_SLCK, KC_AT, KC_PLUS, KC_MINUS, KC_SLASH, KC_ASTR, KC_EQUAL, + KC_CAPSLOCK, KC_CIRC, KC_V, KC_D, KC_L, KC_J, KC_Z, + KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, + KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, + MO(QW_A), KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, MO(QW_S), KC_ENTER), +/* Keymap 2: bepo with altgr key to qwerty compat layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | $ | " | < | > | [ | ] |Delete| |ScroLo| @ | + | - | / | * | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | % | | | e | & | o | e |Backsp| |CapsLo| ^ | v | d | l | j | z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | w | a | u | i | € | , |------| |------| c | t | s | r | n | m | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | e | \ | { | } | . | ~ | | | | ' | q | g | h | f | c | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | |L_NumK| |L_NumK| | | + * | _ |LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[QW_A] = KEYMAP( +// Left hand +KC_DOLLAR, S(KC_QUOT), S(KC_COMM), S(KC_DOT), KC_LBRC, KC_RBRC, KC_DEL, +KC_PERCENT, KC_PIPE, KC_E, KC_AMPR, KC_O, KC_E, KC_BSPC, +KC_W, KC_A, KC_U, KC_I, RALT(KC_5), KC_COMMA, +KC_E, KC_BSLASH, KC_LCBR, KC_RCBR, KC_DOT, KC_TILDE, KC_TAB, +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_UNDS, MO(QW_S), KC_TRNS, // Right hand KC_SLCK, KC_AT, KC_PLUS, KC_MINUS, KC_SLASH, KC_ASTR, KC_EQUAL, KC_CAPSLOCK, KC_CIRC, KC_V, KC_D, KC_L, KC_J, KC_Z, KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, - MO(AQWER), KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -DF(QWER), DF(BASE), -MO(NUM), -MO(FNAV), MO(SQWER), KC_ENTER), -/* Keymap 2: bepo with shift key to qwerty compat layer + KC_TRNS, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, MO(QW_S), KC_ENTER), +/* Keymap 3: bepo with shift key to qwerty compat layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | # | 1 | 2 | 3 | 4 | 5 |Delete| |ScroLo| 6 | 7 | 8 | 9 | 0 | = | @@ -100,12 +137,12 @@ MO(FNAV), MO(SQWER), KC_ENTER), * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | L_Num| | | + * | | |L_NumK| |L_NumK| | | * | Space|LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' */ -[SQWER] = KEYMAP( +[QW_S] = KEYMAP( // Left hand KC_HASH, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_GRV, S(KC_B), S(KC_E), S(KC_P), S(KC_O), S(KC_E), KC_TRNS, @@ -124,43 +161,6 @@ S(KC_ESC), S(KC_INS), S(KC_LGUI), S(KC_LCTL), S(KC_LALT), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -/* Keymap 3: bepo with altgr key to qwerty compat layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | $ | " | < | > | [ | ] |Delete| |ScroLo| @ | + | - | / | * | = | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | % | | | e | & | o | e |Backsp| |CapsLo| ^ | v | d | l | j | z | - * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| - * | w | a | u | i | € | , |------| |------| c | t | s | r | n | m | - * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| - * | e | \ | { | } | . | ~ | | | | ' | q | g | h | f | c | - * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| - * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | L_Num| | | - * | _ |LShift|------| |------|RShift|Enter | - * | | |L_FNav| |L_FNav| | | - * `--------------------' `--------------------' - */ -[AQWER] = KEYMAP( -// Left hand -KC_DOLLAR, S(KC_QUOT), S(KC_COMM), S(KC_DOT), KC_LBRC, KC_RBRC, KC_DEL, -KC_PERCENT, KC_PIPE, KC_E, KC_AMPR, KC_O, KC_E, KC_BSPC, -KC_W, KC_A, KC_U, KC_I, RALT(KC_5), KC_COMMA, -KC_E, KC_BSLASH, KC_LCBR, KC_RCBR, KC_DOT, KC_TILDE, KC_TAB, -KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, - KC_TRNS, KC_TRNS, - MO(NUM), - KC_UNDS, MO(SQWER), MO(FNAV), -// Right hand - KC_SLCK, KC_AT, KC_PLUS, KC_MINUS, KC_SLASH, KC_ASTR, KC_EQUAL, - KC_CAPSLOCK, KC_CIRC, KC_V, KC_D, KC_L, KC_J, KC_Z, - KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, - KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, - KC_TRNS, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -KC_TRNS, KC_TRNS, -MO(NUM), -MO(FNAV), MO(SQWER), KC_ENTER), /* Keymap 4: function / navigation / mouse layer * * ,--------------------------------------------------. ,--------------------------------------------------. @@ -216,7 +216,7 @@ KC_TRNS, KC_TRNS, KC_NO), * | | | | | | | | * `--------------------' `--------------------' */ -[NUM] = KEYMAP( +[NUMK] = KEYMAP( // Left hand KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, @@ -234,7 +234,7 @@ KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_KP_0, M(KP_00), KC_KP_COMMA, KC_KP_ENTER, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, -KC_TRNS, KC_TRNS, KC_TRNS) +KC_TRNS, KC_TRNS, KC_NO) }; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) From 5a2501d90fb9d2ea1a60d42dfd664d899865e6b5 Mon Sep 17 00:00:00 2001 From: Olivier Date: Mon, 28 Nov 2016 16:38:03 +0100 Subject: [PATCH 084/124] Add the AZERTY compatibility layer. --- keyboards/ergodox/keymaps/bepo/keymap.c | 125 ++++++++++++++++++++++- keyboards/ergodox/keymaps/bepo/readme.md | 4 +- 2 files changed, 122 insertions(+), 7 deletions(-) diff --git a/keyboards/ergodox/keymaps/bepo/keymap.c b/keyboards/ergodox/keymaps/bepo/keymap.c index c19ab0d48d..05250ee6a7 100644 --- a/keyboards/ergodox/keymaps/bepo/keymap.c +++ b/keyboards/ergodox/keymaps/bepo/keymap.c @@ -1,13 +1,17 @@ #include "ergodox.h" #include "keymap_bepo.h" +#include "keymap_french.h" // keymaps #define BEPO 0 // default layer, for bepo compatible systems #define QW_B 1 // bepo to qwerty base compat layer, for qwerty systems #define QW_A 2 // bepo with altgr key to qwerty compat layer #define QW_S 3 // bepo with shift key to qwerty compat layer -#define FNAV 4 // function / navigation / mouse layer -#define NUMK 5 // numeric keypad layer +#define AZ_B 4 // bepo to azerty base compat layer, for azerty systems +#define AZ_A 5 // bepo with altgr key to azerty compat layer +#define AZ_S 6 // bepo with shift key to azerty compat layer +#define FNAV 7 // function / navigation / mouse layer +#define NUMK 8 // numeric keypad layer // macros #define KP_00 0 // keypad "double 0" @@ -47,7 +51,7 @@ KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, KC_NUMLOCK, BP_APOS, BP_Q, BP_G, BP_H, BP_F, BP_CCED, BP_ALGR, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -DF(QW_B), DF(BEPO), +DF(AZ_B), DF(BEPO), MO(NUMK), MO(FNAV), KC_RSHIFT, KC_ENTER), /* Keymap 1: bepo to qwerty base compat layer @@ -161,7 +165,118 @@ S(KC_ESC), S(KC_INS), S(KC_LGUI), S(KC_LCTL), S(KC_LALT), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -/* Keymap 4: function / navigation / mouse layer +/* Keymap 4: bepo to azerty base compat layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | $ | " | < | > | ( | ) |Delete| |ScroLo| @ | + | - | / | * | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | % | b |e_acut| p | o |e_grav|Backsp| |CapsLo| ^ | v | d | l | j | z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | w | a | u | i | e | , |------| |------| c | t | s | r | n | m | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | e |a_grav| y | x | . | k | | | | ' | q | g | h | f | c_cedil| + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | |L_NumK| |L_NumK| | | + * | Space|LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[AZ_B] = KEYMAP( +// Left hand +FR_DLR, FR_QUOT, FR_LESS, FR_GRTR, FR_LPRN, FR_RPRN, KC_DEL, +FR_PERC, KC_B, FR_EACU, KC_P, KC_O, FR_EGRV, KC_BSPC, +FR_W, FR_A, KC_U, KC_I, KC_E, FR_COMM, +KC_E, FR_AGRV, KC_Y, KC_X, FR_DOT, KC_K, KC_TAB, +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_SPC, MO(AZ_S), KC_TRNS, +// Right hand + KC_SLCK, FR_AT, FR_PLUS, FR_MINS, FR_SLSH, FR_ASTR, FR_EQL, + KC_CAPSLOCK, KC_LBRC, KC_V, KC_D, KC_L, KC_J, FR_Z, + KC_C, KC_T, KC_S, KC_R, KC_N, FR_M, + KC_NUMLOCK, FR_APOS, FR_Q, KC_G, KC_H, KC_F, FR_CCED, + MO(AZ_A), KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, MO(AZ_S), KC_ENTER), +/* Keymap 5: bepo with altgr key to azerty compat layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | $ | " | < | > | [ | ] |Delete| |ScroLo| @ | + | - | / | * | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | % | | | e | & | o | e |Backsp| |CapsLo| ^ | v | d | l | j | z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | w | a |u_grav| trem | € | , |------| |------| c | t | s | r | n | m | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | / | \ | { | } | . | ~ | | | | ' | q | g | h | f | c | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | |L_NumK| |L_NumK| | | + * | _ |LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[AZ_A] = KEYMAP( +// Left hand +FR_DLR, FR_QUOT, FR_LESS, FR_GRTR, FR_LBRC, FR_RBRC, KC_DEL, +FR_PERC, FR_PIPE, FR_EACU, FR_AMP, KC_O, FR_EGRV, KC_BSPC, +FR_W, FR_A, FR_UGRV, S(KC_LBRC), FR_EURO, FR_COMM, +FR_SLSH, FR_BSLS, FR_LCBR, FR_RCBR, FR_DOT, FR_TILD, KC_TAB, +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + KC_TRNS, KC_TRNS, + KC_TRNS, + FR_UNDS, MO(AZ_S), KC_TRNS, +// Right hand + KC_SLCK, FR_AT, FR_PLUS, FR_MINS, FR_SLSH, FR_ASTR, FR_EQL, + KC_CAPSLOCK, KC_LBRC, KC_V, KC_D, KC_L, KC_J, FR_Z, + KC_C, KC_T, KC_S, KC_R, KC_N, FR_M, + KC_NUMLOCK, FR_APOS, FR_Q, KC_G, KC_H, KC_F, FR_CCED, + KC_TRNS, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, MO(AZ_S), KC_ENTER), +/* Keymap 6: bepo with shift key to azerty compat layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | # | 1 | 2 | 3 | 4 | 5 |Delete| |ScroLo| 6 | 7 | 8 | 9 | 0 | ° | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | ` | B | E | P | O | E |Backsp| |CapsLo| ! | V | D | L | J | Z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | W | A | U | I | E | ; |------| |------| C | T | S | R | N | M | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | E | A | Y | X | : | K | | | | ? | Q | G | H | F | C | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | |L_NumK| |L_NumK| | | + * | Space|LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[AZ_S] = KEYMAP( +// Left hand +FR_HASH, FR_1, FR_2, FR_3, FR_4, FR_5, KC_TRNS, +FR_GRV, S(KC_B), S(KC_E), S(KC_P), S(KC_O), S(KC_E), KC_TRNS, +S(FR_W), S(FR_A), S(KC_U), S(KC_I), S(KC_E), FR_SCLN, +S(KC_E), S(FR_A), S(KC_Y), S(KC_X), FR_COLN, S(KC_K), S(KC_TAB), +S(KC_ESC), S(KC_INS), S(KC_LGUI), S(KC_LCTL), S(KC_LALT), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, +// Right hand + KC_TRNS, FR_6, FR_7, FR_8, FR_9, FR_0, FR_OVRR, + KC_TRNS, FR_EXLM, S(KC_V), S(KC_D), S(KC_L), S(KC_J), S(FR_Z), + S(KC_C), S(KC_T), S(KC_S), S(KC_R), S(KC_N), S(FR_M), + KC_TRNS, FR_QUES, S(FR_Q), S(KC_G), S(KC_H), S(KC_F), S(KC_C), + S(KC_RALT), S(KC_RCTL), S(KC_RGUI), KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS), +/* Keymap 7: function / navigation / mouse layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | | F1 | F2 | F3 | F4 | F5 |VolMut| | | F6 | F7 | F8 | F9 | F10 | | @@ -198,7 +313,7 @@ KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO), -/* Keymap 5: numeric keypad layer, sends keypad codes +/* Keymap 8: numeric keypad layer, sends keypad codes * * ,--------------------------------------------------. ,--------------------------------------------------. * | | | | | | | | | | | NumLo| / | * | - | | diff --git a/keyboards/ergodox/keymaps/bepo/readme.md b/keyboards/ergodox/keymaps/bepo/readme.md index 51a5069851..2959ac8298 100644 --- a/keyboards/ergodox/keymaps/bepo/readme.md +++ b/keyboards/ergodox/keymaps/bepo/readme.md @@ -27,8 +27,8 @@ Touche de fonction permettant de saisir les touches F1 à F12, les touches F1 à Touche de fonction permettant l'accès au pavé numérique comme sur la TypeMatrix 2030, mais sans avoir à déplacer la main droite : avec les doigts sur la rangée de repos, possibilité de saisir les chiffres "4", "5" et "6" comme sur un pavé numérique classique. Le double "0" de la TypeMatrix a été conservé, et gagne une possibilité de répétition en simples "0". -Touche permettant de basculer en mode BEPO sur un système configuré pour un clavier QWERTY. Cette compatibilité n'est pas parfaite (pas encore de gestion des accents mais ça devrait être faisable avec une disposition en qwerty international, et les combinaisons de touches ne sont pas toutes supportées puisque le clavier traduit déjà certaines touches en combinaisons) mais reste pratique pour une saisie de texte occasionnelle. +Touche permettant de basculer en mode BEPO sur un système configuré pour un clavier QWERTY. Cette compatibilité n'est pas parfaite (pas encore de gestion des accents mais ça devrait être faisable avec une disposition en qwerty international, et les combinaisons de touches ne sont pas toutes supportées puisque le clavier traduit déjà certaines touches en combinaisons) mais reste pratique pour une saisie de texte occasionnelle et pour des accès BIOS ou console en QWERTY. -TODO : couche de compatibilité pour utiliser la disposition BÉPO sur un système configuré pour un clavier AZERTY. +Touche permettant de basculer en mode BEPO sur un système configuré pour un clavier AZERTY. Cette compatibilité n'est pas parfaite (pas de gestion des caractères non présents sur le clavier AZERTY, et les combinaisons de touches ne sont pas toutes supportées puisque le clavier traduit déjà certaines touches en combinaisons) mais reste pratique pour une saisie de texte occasionnelle et pour faire du bureau à distance vers un système Windows sans BEPO. > Olivier Smedts From 06f18e95d4670a055ca349da7d653e0bcb37d83a Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Tue, 29 Nov 2016 00:06:12 -0500 Subject: [PATCH 085/124] enable api sysex for ez --- keyboards/ergodox/ez/rules.mk | 1 + 1 file changed, 1 insertion(+) diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk index a9715beb85..f570061fe4 100644 --- a/keyboards/ergodox/ez/rules.mk +++ b/keyboards/ergodox/ez/rules.mk @@ -72,6 +72,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # SLEEP_LED_ENABLE = no +API_SYSEX_ENABLE ?= yes ifndef QUANTUM_DIR include ../../../Makefile From d0cefef946660865dae80877886fcce610920a27 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Tue, 29 Nov 2016 00:09:56 -0500 Subject: [PATCH 086/124] enable rgblight by default for ez --- keyboards/ergodox/ez/config.h | 11 +++++++++++ keyboards/ergodox/ez/rules.mk | 1 + 2 files changed, 12 insertions(+) diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index 67a856e511..c2750a321f 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -41,6 +41,17 @@ along with this program. If not, see . #define LED_BRIGHTNESS_LO 15 #define LED_BRIGHTNESS_HI 255 +/* ws2812 RGB LED */ +#define RGB_DI_PIN D7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 15 // Number of LEDs +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 255 +#define RGBLIGHT_VAL_STEP 12 + +#define RGB_MIDI +#define RGBW_BB_TWI + /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk index f570061fe4..893cfa7a84 100644 --- a/keyboards/ergodox/ez/rules.mk +++ b/keyboards/ergodox/ez/rules.mk @@ -73,6 +73,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 SLEEP_LED_ENABLE = no API_SYSEX_ENABLE ?= yes +RGBLIGHT_ENABLE ?= yes ifndef QUANTUM_DIR include ../../../Makefile From f946d830f98da0161753d37da9659caa7469cf4f Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Tue, 29 Nov 2016 00:11:11 -0500 Subject: [PATCH 087/124] guess i didnt pull --- keyboards/ergodox/ez/config.h | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index f3e1020bdb..c2750a321f 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -56,17 +56,6 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 -/* ws2812 RGB LED */ -#define RGB_DI_PIN D7 -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 15 // Number of LEDs -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 255 -#define RGBLIGHT_VAL_STEP 12 - -#define RGB_MIDI -#define RGBW_BB_TWI - /* * Feature disable options * These options are also useful to firmware size reduction. From 4094544d41450617bc21ab58646603b8964eae0e Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Tue, 29 Nov 2016 09:23:16 -0500 Subject: [PATCH 088/124] Test layout for ErgoDox EZ manufacturing robot --- .../keymaps/robot_test_layout/keymap.c | 130 ++++++++++++++++++ .../keymaps/robot_test_layout/readme.md | 5 + quantum/rgblight.c | 6 + quantum/rgblight.h | 2 + 4 files changed, 143 insertions(+) create mode 100644 keyboards/ergodox/keymaps/robot_test_layout/keymap.c create mode 100644 keyboards/ergodox/keymaps/robot_test_layout/readme.md diff --git a/keyboards/ergodox/keymaps/robot_test_layout/keymap.c b/keyboards/ergodox/keymaps/robot_test_layout/keymap.c new file mode 100644 index 0000000000..0363eedc2b --- /dev/null +++ b/keyboards/ergodox/keymaps/robot_test_layout/keymap.c @@ -0,0 +1,130 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + RGB_FF0000, + RGB_00FF00, + RGB_0000FF, + RGB_FFFFFF, + RGB_TOGGLE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = KEYMAP( + RGB_TOGGLE,RGB_FF0000,RGB_00FF00,RGB_0000FF,RGB_FFFFFF,RGB_TOGGLE,KC_6, + KC_A,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_E,KC_A,KC_A,KC_S,KC_D,KC_F,KC_G,KC_A,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_L,KC_Z,KC_QUOTE,KC_N,KC_U,KC_C,KC_E,KC_8,KC_9,KC_Y,KC_COMMA,KC_6,KC_7,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINUS,KC_J,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_BSLASH,KC_H,KC_J,KC_K,KC_L,KC_J,KC_K,KC_Z,KC_N,KC_M,KC_COMMA,KC_DOT,KC_E,KC_QUOTE,KC_8,KC_7,KC_LBRACKET,KC_RBRACKET,KC_H,KC_9,KC_7,KC_8,KC_7,KC_6,KC_9), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(1) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case RGB_FF0000: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + EZ_RGB(0xff0000); + register_code(KC_A); unregister_code(KC_A); + #endif + } + return false; + break; + case RGB_00FF00: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + EZ_RGB(0x00ff00); + register_code(KC_B); unregister_code(KC_B); + #endif + } + return false; + break; + case RGB_0000FF: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + EZ_RGB(0x0000ff); + register_code(KC_C); unregister_code(KC_C); + #endif + } + return false; + break; + case RGB_FFFFFF: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + EZ_RGB(0xffffff); + register_code(KC_D); unregister_code(KC_D); + #endif + } + return false; + break; + case RGB_TOGGLE: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_toggle(); + register_code(KC_F); unregister_code(KC_F); + #endif + } + return false; + break; + } + return true; +} + +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_3_on(); + break; + case 4: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + break; + case 5: + ergodox_right_led_1_on(); + ergodox_right_led_3_on(); + break; + case 6: + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; + case 7: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; + default: + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/robot_test_layout/readme.md b/keyboards/ergodox/keymaps/robot_test_layout/readme.md new file mode 100644 index 0000000000..45dc2aa76c --- /dev/null +++ b/keyboards/ergodox/keymaps/robot_test_layout/readme.md @@ -0,0 +1,5 @@ +# Robot test layout + +Use this layout if you like to pretend you're [Norman](https://www.youtube.com/watch?v=-sbxFBay-tg), the ErgoDox EZ manufacturing robot. + +It's really meant just for internal use, but we're posting it on GitHub anyway, because hurray to open source. :) diff --git a/quantum/rgblight.c b/quantum/rgblight.c index bb03d6e913..625971e0fe 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -425,6 +425,12 @@ void rgblight_timer_toggle(void) { dprintf("TIMER3 toggled.\n"); } +void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b) { + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(r, g, b); +} + void rgblight_task(void) { if (rgblight_timer_enabled) { // mode = 1, static light, do nothing here diff --git a/quantum/rgblight.h b/quantum/rgblight.h index 28a410e480..aa1d026e0e 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -84,6 +84,8 @@ void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1); void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val); +#define EZ_RGB(val) rgblight_show_solid_color((val >> 16) & 0xFF, (val >> 8) & 0xFF, val & 0xFF) +void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b); void rgblight_task(void); From fe001d46fd06924bb81fe8d506f5be8894db3df0 Mon Sep 17 00:00:00 2001 From: Wilba6582 Date: Mon, 28 Nov 2016 18:31:16 +1100 Subject: [PATCH 089/124] Initial version of Raw HID interface --- keyboards/planck/planck.c | 16 ++++- keyboards/planck/rules.mk | 3 +- tmk_core/common.mk | 4 ++ tmk_core/common/raw_hid.h | 8 +++ tmk_core/protocol/lufa/descriptor.c | 87 +++++++++++++++++++++++++- tmk_core/protocol/lufa/descriptor.h | 35 ++++++++--- tmk_core/protocol/lufa/lufa.c | 94 +++++++++++++++++++++++++++++ 7 files changed, 237 insertions(+), 10 deletions(-) create mode 100644 tmk_core/common/raw_hid.h diff --git a/keyboards/planck/planck.c b/keyboards/planck/planck.c index 645b450d1d..0d37b66223 100644 --- a/keyboards/planck/planck.c +++ b/keyboards/planck/planck.c @@ -1,5 +1,8 @@ #include "planck.h" +#include "raw_hid.h" +#include "keymap.h" + #ifdef ONEHAND_ENABLE __attribute__ ((weak)) const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { @@ -16,4 +19,15 @@ void matrix_init_kb(void) { PORTE |= (1<<6); matrix_init_user(); -} \ No newline at end of file +} + +#ifdef RAW_ENABLE + +void raw_hid_receive( uint8_t *data, uint8_t length ) +{ + // Basic test of Raw HID + // Echo back data received + raw_hid_send( data, length ); +} + +#endif diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk index ccee972715..4874d92b9f 100644 --- a/keyboards/planck/rules.mk +++ b/keyboards/planck/rules.mk @@ -62,7 +62,8 @@ AUDIO_ENABLE ?= no # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -API_SYSEX_ENABLE = yes +API_SYSEX_ENABLE = no +RAW_ENABLE = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/tmk_core/common.mk b/tmk_core/common.mk index f826a7b540..d65f02f12b 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -50,6 +50,10 @@ ifeq ($(strip $(EXTRAKEY_ENABLE)), yes) TMK_COMMON_DEFS += -DEXTRAKEY_ENABLE endif +ifeq ($(strip $(RAW_ENABLE)), yes) + TMK_COMMON_DEFS += -DRAW_ENABLE +endif + ifeq ($(strip $(CONSOLE_ENABLE)), yes) TMK_COMMON_DEFS += -DCONSOLE_ENABLE else diff --git a/tmk_core/common/raw_hid.h b/tmk_core/common/raw_hid.h new file mode 100644 index 0000000000..86da02fd15 --- /dev/null +++ b/tmk_core/common/raw_hid.h @@ -0,0 +1,8 @@ +#ifndef _RAW_HID_H_ +#define _RAW_HID_H_ + +void raw_hid_receive( uint8_t *data, uint8_t length ); + +void raw_hid_send( uint8_t *data, uint8_t length ); + +#endif diff --git a/tmk_core/protocol/lufa/descriptor.c b/tmk_core/protocol/lufa/descriptor.c index 6f2407f580..bf47787d29 100644 --- a/tmk_core/protocol/lufa/descriptor.c +++ b/tmk_core/protocol/lufa/descriptor.c @@ -164,6 +164,28 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM ExtrakeyReport[] = }; #endif +#ifdef RAW_ENABLE +const USB_Descriptor_HIDReport_Datatype_t PROGMEM RawReport[] = +{ + HID_RI_USAGE_PAGE(16, 0xFF60), /* Vendor Page 0xFF60 */ + HID_RI_USAGE(8, 0x61), /* Vendor Usage 0x61 */ + HID_RI_COLLECTION(8, 0x01), /* Application */ + HID_RI_USAGE(8, 0x62), /* Vendor Usage 0x62 */ + HID_RI_LOGICAL_MINIMUM(8, 0x00), + HID_RI_LOGICAL_MAXIMUM(16, 0x00FF), + HID_RI_REPORT_COUNT(8, RAW_EPSIZE), + HID_RI_REPORT_SIZE(8, 0x08), + HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), + HID_RI_USAGE(8, 0x63), /* Vendor Usage 0x63 */ + HID_RI_LOGICAL_MINIMUM(8, 0x00), + HID_RI_LOGICAL_MAXIMUM(16, 0x00FF), + HID_RI_REPORT_COUNT(8, RAW_EPSIZE), + HID_RI_REPORT_SIZE(8, 0x08), + HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), + HID_RI_END_COLLECTION(0), +}; +#endif + #ifdef CONSOLE_ENABLE const USB_Descriptor_HIDReport_Datatype_t PROGMEM ConsoleReport[] = { @@ -399,6 +421,58 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = }, #endif + /* + * Raw + */ + #ifdef RAW_ENABLE + .Raw_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = RAW_INTERFACE, + .AlternateSetting = 0x00, + + .TotalEndpoints = 2, + + .Class = HID_CSCP_HIDClass, + .SubClass = HID_CSCP_NonBootSubclass, + .Protocol = HID_CSCP_NonBootProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .Raw_HID = + { + .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, + + .HIDSpec = VERSION_BCD(1,1,1), + .CountryCode = 0x00, + .TotalReportDescriptors = 1, + .HIDReportType = HID_DTYPE_Report, + .HIDReportLength = sizeof(RawReport) + }, + + .Raw_INEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = (ENDPOINT_DIR_IN | RAW_IN_EPNUM), + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = RAW_EPSIZE, + .PollingIntervalMS = 0x01 + }, + + .Raw_OUTEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = (ENDPOINT_DIR_OUT | RAW_OUT_EPNUM), + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = RAW_EPSIZE, + .PollingIntervalMS = 0x01 + }, + #endif + /* * Console */ @@ -754,7 +828,6 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x05 }, #endif - }; @@ -846,6 +919,12 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = sizeof(USB_HID_Descriptor_HID_t); break; #endif +#ifdef RAW_ENABLE + case RAW_INTERFACE: + Address = &ConfigurationDescriptor.Raw_HID; + Size = sizeof(USB_HID_Descriptor_HID_t); + break; +#endif #ifdef CONSOLE_ENABLE case CONSOLE_INTERFACE: Address = &ConfigurationDescriptor.Console_HID; @@ -878,6 +957,12 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = sizeof(ExtrakeyReport); break; #endif +#ifdef RAW_ENABLE + case RAW_INTERFACE: + Address = &RawReport; + Size = sizeof(RawReport); + break; +#endif #ifdef CONSOLE_ENABLE case CONSOLE_INTERFACE: Address = &ConsoleReport; diff --git a/tmk_core/protocol/lufa/descriptor.h b/tmk_core/protocol/lufa/descriptor.h index c6c94e3618..24ce420e6a 100644 --- a/tmk_core/protocol/lufa/descriptor.h +++ b/tmk_core/protocol/lufa/descriptor.h @@ -71,6 +71,14 @@ typedef struct USB_Descriptor_Endpoint_t Extrakey_INEndpoint; #endif +#ifdef RAW_ENABLE + // Raw HID Interface + USB_Descriptor_Interface_t Raw_Interface; + USB_HID_Descriptor_HID_t Raw_HID; + USB_Descriptor_Endpoint_t Raw_INEndpoint; + USB_Descriptor_Endpoint_t Raw_OUTEndpoint; +#endif + #ifdef CONSOLE_ENABLE // Console HID Interface USB_Descriptor_Interface_t Console_Interface; @@ -137,10 +145,16 @@ typedef struct # define EXTRAKEY_INTERFACE MOUSE_INTERFACE #endif +#ifdef RAW_ENABLE +# define RAW_INTERFACE (EXTRAKEY_INTERFACE + 1) +#else +# define RAW_INTERFACE EXTRAKEY_INTERFACE +#endif + #ifdef CONSOLE_ENABLE -# define CONSOLE_INTERFACE (EXTRAKEY_INTERFACE + 1) +# define CONSOLE_INTERFACE (RAW_INTERFACE + 1) #else -# define CONSOLE_INTERFACE EXTRAKEY_INTERFACE +# define CONSOLE_INTERFACE RAW_INTERFACE #endif #ifdef NKRO_ENABLE @@ -182,12 +196,19 @@ typedef struct # define EXTRAKEY_IN_EPNUM MOUSE_IN_EPNUM #endif +#ifdef RAW_ENABLE +# define RAW_IN_EPNUM (EXTRAKEY_IN_EPNUM + 1) +# define RAW_OUT_EPNUM (EXTRAKEY_IN_EPNUM + 2) +#else +# define RAW_OUT_EPNUM EXTRAKEY_IN_EPNUM +#endif + #ifdef CONSOLE_ENABLE -# define CONSOLE_IN_EPNUM (EXTRAKEY_IN_EPNUM + 1) -# define CONSOLE_OUT_EPNUM (EXTRAKEY_IN_EPNUM + 1) -//# define CONSOLE_OUT_EPNUM (EXTRAKEY_IN_EPNUM + 2) +# define CONSOLE_IN_EPNUM (RAW_OUT_EPNUM + 1) +//# define CONSOLE_OUT_EPNUM (RAW_OUT_EPNUM + 2) +# define CONSOLE_OUT_EPNUM (RAW_OUT_EPNUM + 1) #else -# define CONSOLE_OUT_EPNUM EXTRAKEY_IN_EPNUM +# define CONSOLE_OUT_EPNUM RAW_OUT_EPNUM #endif #ifdef NKRO_ENABLE @@ -217,7 +238,6 @@ typedef struct # define CDC_OUT_EPNUM MIDI_STREAM_OUT_EPNUM #endif - #if defined(__AVR_ATmega32U2__) && CDC_OUT_EPNUM > 4 # error "Endpoints are not available enough to support all functions. Remove some in Makefile.(MOUSEKEY, EXTRAKEY, CONSOLE, NKRO, MIDI, SERIAL)" #endif @@ -225,6 +245,7 @@ typedef struct #define KEYBOARD_EPSIZE 8 #define MOUSE_EPSIZE 8 #define EXTRAKEY_EPSIZE 8 +#define RAW_EPSIZE 32 #define CONSOLE_EPSIZE 32 #define NKRO_EPSIZE 32 #define MIDI_STREAM_EPSIZE 64 diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 39d4824b6b..aeb5f07815 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -80,6 +80,10 @@ #include "sysex_tools.h" #endif +#ifdef RAW_ENABLE + #include "raw_hid.h" +#endif + uint8_t keyboard_idle = 0; /* 0: Boot Protocol, 1: Report Protocol(default) */ uint8_t keyboard_protocol = 1; @@ -175,6 +179,80 @@ USB_ClassInfo_CDC_Device_t cdc_device = }; #endif +#ifdef RAW_ENABLE + +void raw_hid_send( uint8_t *data, uint8_t length ) +{ + // TODO: implement variable size packet + if ( length != RAW_EPSIZE ) + { + return; + } + + if (USB_DeviceState != DEVICE_STATE_Configured) + { + return; + } + + // TODO: decide if we allow calls to raw_hid_send() in the middle + // of other endpoint usage. + uint8_t ep = Endpoint_GetCurrentEndpoint(); + + Endpoint_SelectEndpoint(RAW_IN_EPNUM); + + // Check to see if the host is ready to accept another packet + if (Endpoint_IsINReady()) + { + // Write data + Endpoint_Write_Stream_LE(data, RAW_EPSIZE, NULL); + // Finalize the stream transfer to send the last packet + Endpoint_ClearIN(); + } + + Endpoint_SelectEndpoint(ep); +} + +__attribute__ ((weak)) +void raw_hid_receive( uint8_t *data, uint8_t length ) +{ + // Users should #include "raw_hid.h" in their own code + // and implement this function there. Leave this as weak linkage + // so users can opt to not handle data coming in. +} + +static void raw_hid_task(void) +{ + // Create a temporary buffer to hold the read in data from the host + uint8_t data[RAW_EPSIZE]; + bool data_read = false; + + // Device must be connected and configured for the task to run + if (USB_DeviceState != DEVICE_STATE_Configured) + return; + + Endpoint_SelectEndpoint(RAW_OUT_EPNUM); + + // Check to see if a packet has been sent from the host + if (Endpoint_IsOUTReceived()) + { + // Check to see if the packet contains data + if (Endpoint_IsReadWriteAllowed()) + { + /* Read data */ + Endpoint_Read_Stream_LE(data, sizeof(data), NULL); + data_read = true; + } + + // Finalize the stream transfer to receive the last packet + Endpoint_ClearOUT(); + + if ( data_read ) + { + raw_hid_receive( data, sizeof(data) ); + } + } +} +#endif /******************************************************************************* * Console @@ -294,6 +372,8 @@ void EVENT_USB_Device_WakeUp() #endif } + + #ifdef CONSOLE_ENABLE static bool console_flush = false; #define CONSOLE_FLUSH_SET(b) do { \ @@ -311,6 +391,7 @@ void EVENT_USB_Device_StartOfFrame(void) Console_Task(); console_flush = false; } + #endif /** Event handler for the USB_ConfigurationChanged event. @@ -339,6 +420,14 @@ void EVENT_USB_Device_ConfigurationChanged(void) EXTRAKEY_EPSIZE, ENDPOINT_BANK_SINGLE); #endif +#ifdef RAW_ENABLE + /* Setup Raw HID Report Endpoints */ + ConfigSuccess &= ENDPOINT_CONFIG(RAW_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, + RAW_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= ENDPOINT_CONFIG(RAW_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, + RAW_EPSIZE, ENDPOINT_BANK_SINGLE); +#endif + #ifdef CONSOLE_ENABLE /* Setup Console HID Report Endpoints */ ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, @@ -1064,9 +1153,14 @@ int main(void) CDC_Device_USBTask(&cdc_device); #endif +#ifdef RAW_ENABLE + raw_hid_task(); +#endif + #if !defined(INTERRUPT_CONTROL_ENDPOINT) USB_USBTask(); #endif + } } From 66b13a66e93c50ba6258fcde548ab946fd8db683 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Wed, 30 Nov 2016 22:22:57 -0500 Subject: [PATCH 090/124] Better layout --- .../keymaps/robot_test_layout/keymap.c | 121 ++++++++++-------- 1 file changed, 71 insertions(+), 50 deletions(-) diff --git a/keyboards/ergodox/keymaps/robot_test_layout/keymap.c b/keyboards/ergodox/keymaps/robot_test_layout/keymap.c index 0363eedc2b..480be177f0 100644 --- a/keyboards/ergodox/keymaps/robot_test_layout/keymap.c +++ b/keyboards/ergodox/keymaps/robot_test_layout/keymap.c @@ -9,16 +9,42 @@ enum custom_keycodes { RGB_00FF00, RGB_0000FF, RGB_FFFFFF, - RGB_TOGGLE + RGB_TOGGLE, + LED1, + LED2, + LED3 }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = KEYMAP( - RGB_TOGGLE,RGB_FF0000,RGB_00FF00,RGB_0000FF,RGB_FFFFFF,RGB_TOGGLE,KC_6, - KC_A,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_E,KC_A,KC_A,KC_S,KC_D,KC_F,KC_G,KC_A,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_L,KC_Z,KC_QUOTE,KC_N,KC_U,KC_C,KC_E,KC_8,KC_9,KC_Y,KC_COMMA,KC_6,KC_7,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINUS,KC_J,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_BSLASH,KC_H,KC_J,KC_K,KC_L,KC_J,KC_K,KC_Z,KC_N,KC_M,KC_COMMA,KC_DOT,KC_E,KC_QUOTE,KC_8,KC_7,KC_LBRACKET,KC_RBRACKET,KC_H,KC_9,KC_7,KC_8,KC_7,KC_6,KC_9), + RGB_TOGGLE, RGB_FF0000, RGB_00FF00, RGB_0000FF, RGB_FFFFFF, KC_5, KC_LPRN, + KC_GRAVE, KC_A, KC_B, KC_C, KC_D, KC_E, KC_EXLM, + KC_HASH, KC_J, KC_K, KC_L, KC_M, KC_N, + KC_AMPR, KC_T, KC_U, KC_V, KC_W, KC_X, KC_DLR, + KC_PIPE, KC_R, KC_PLUS, KC_LCBR, KC_RCBR, + + KC_F, KC_G, + KC_H, + KC_P, KC_O, KC_I, + + + + // RIGHT HAND + KC_RPRN, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_AT, KC_F, KC_G, KC_H, KC_I, KC_COLN, KC_BSLS, + KC_O, KC_P, KC_Q, KC_R, KC_S, KC_QUOT, + LSFT(KC_COMM), KC_Y, KC_Z, KC_COMM, KC_DOT, KC_SLSH, KC_ASTR, + KC_A, KC_B, KC_C, KC_D, KC_PIPE, + + LED1, KC_E, + LED2, + LED3, KC_J, KC_K + ) }; + + const uint16_t PROGMEM fn_actions[] = { [1] = ACTION_LAYER_TAP_TOGGLE(1) }; @@ -35,7 +61,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return MACRO_NONE; }; - +bool status_led1_on = false, status_led2_on = false, status_led3_on = false; bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { // dynamically generate these. @@ -43,7 +69,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { #ifdef RGBLIGHT_ENABLE EZ_RGB(0xff0000); - register_code(KC_A); unregister_code(KC_A); + register_code(KC_1); unregister_code(KC_1); #endif } return false; @@ -52,7 +78,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { #ifdef RGBLIGHT_ENABLE EZ_RGB(0x00ff00); - register_code(KC_B); unregister_code(KC_B); + register_code(KC_2); unregister_code(KC_2); #endif } return false; @@ -61,7 +87,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { #ifdef RGBLIGHT_ENABLE EZ_RGB(0x0000ff); - register_code(KC_C); unregister_code(KC_C); + register_code(KC_3); unregister_code(KC_3); #endif } return false; @@ -70,7 +96,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { #ifdef RGBLIGHT_ENABLE EZ_RGB(0xffffff); - register_code(KC_D); unregister_code(KC_D); + register_code(KC_4); unregister_code(KC_4); #endif } return false; @@ -79,52 +105,47 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { #ifdef RGBLIGHT_ENABLE rgblight_toggle(); - register_code(KC_F); unregister_code(KC_F); + register_code(KC_EQL); unregister_code(KC_EQL); #endif } return false; break; + case LED1: + if (record->event.pressed) { + if(status_led1_on) { + ergodox_right_led_1_off(); + status_led1_on = false; + } else { + ergodox_right_led_1_on(); + status_led1_on = true; + } + } + return false; + break; + case LED2: + if (record->event.pressed) { + if(status_led2_on) { + ergodox_right_led_2_off(); + status_led2_on = false; + } else { + ergodox_right_led_2_on(); + status_led2_on = true; + } + } + return false; + break; + case LED3: + if (record->event.pressed) { + if(status_led3_on) { + ergodox_right_led_3_off(); + status_led3_on = false; + } else { + ergodox_right_led_3_on(); + status_led3_on = true; + } + } + return false; + break; } return true; } - -void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - switch (layer) { - case 1: - ergodox_right_led_1_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - case 3: - ergodox_right_led_3_on(); - break; - case 4: - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - break; - case 5: - ergodox_right_led_1_on(); - ergodox_right_led_3_on(); - break; - case 6: - ergodox_right_led_2_on(); - ergodox_right_led_3_on(); - break; - case 7: - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - ergodox_right_led_3_on(); - break; - default: - break; - } - -}; From 1f290f6213c7c3bf001a85242cfae4f9b5a14942 Mon Sep 17 00:00:00 2001 From: cbbrowne Date: Thu, 1 Dec 2016 16:21:15 -0500 Subject: [PATCH 091/124] Make my builds smaller --- keyboards/planck/keymaps/cbbrowne/Makefile | 7 ++++--- keyboards/planck/keymaps/cbbrowne/config.h | 3 +++ 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/keyboards/planck/keymaps/cbbrowne/Makefile b/keyboards/planck/keymaps/cbbrowne/Makefile index 581e08cd02..3c20da84be 100644 --- a/keyboards/planck/keymaps/cbbrowne/Makefile +++ b/keyboards/planck/keymaps/cbbrowne/Makefile @@ -5,8 +5,8 @@ # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work @@ -16,10 +16,11 @@ AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +API_SYSEX_ENABLE = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR include ../../../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/planck/keymaps/cbbrowne/config.h b/keyboards/planck/keymaps/cbbrowne/config.h index 1e04ba61d7..bd15fd5a22 100644 --- a/keyboards/planck/keymaps/cbbrowne/config.h +++ b/keyboards/planck/keymaps/cbbrowne/config.h @@ -1,6 +1,9 @@ #ifndef CONFIG_USER_H #define CONFIG_USER_H +#define NO_DEBUG +#define NO_PRINT + #include "../../config.h" #define LEADER_TIMEOUT 300 From b787ed9dc6c81f47215c48d47240717afa3cd440 Mon Sep 17 00:00:00 2001 From: cbbrowne Date: Thu, 1 Dec 2016 16:24:03 -0500 Subject: [PATCH 092/124] More notes on .hex size protection --- readme.md | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/readme.md b/readme.md index a92ae4c1dc..5c82efcddd 100644 --- a/readme.md +++ b/readme.md @@ -1318,14 +1318,27 @@ You probably don't want to "brick" your keyboard, making it impossible to rewrite firmware onto it. Here are some of the parameters to show what things are (and likely aren't) too risky. -- If a keyboard map does not include RESET, then, to get into DFU +- If your keyboard map does not include RESET, then, to get into DFU mode, you will need to press the reset button on the PCB, which - requires unscrewing some bits. + requires unscrewing the bottom. - Messing with tmk_core / common files might make the keyboard inoperable - Too large a .hex file is trouble; `make dfu` will erase the block, test the size (oops, wrong order!), which errors out, failing to - flash the keyboard + flash the keyboard, leaving it in DFU mode. + - To this end, note that the maximum .hex file size on Planck is + 7000h (28672 decimal) +```Linking: .build/planck_rev4_cbbrowne.elf [OK] +Creating load file for Flash: .build/planck_rev4_cbbrowne.hex [OK] + +Size after: + text data bss dec hex filename + 0 22396 0 22396 577c planck_rev4_cbbrowne.hex +``` + - The above file is of size 22396/577ch, which is less than + 28672/7000h + - As long as you have a suitable alternative .hex file around, you + can retry, loading that one - DFU tools do /not/ allow you to write into the bootloader (unless you throw in extra fruitsalad of options), so there is little risk there. From af4c44deef55a300113b4a65f8d3ab37bf2ef97d Mon Sep 17 00:00:00 2001 From: cbbrowne Date: Thu, 1 Dec 2016 16:31:30 -0500 Subject: [PATCH 093/124] Improve docs on SYSEX bit --- keyboards/planck/keymaps/cbbrowne/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/planck/keymaps/cbbrowne/Makefile b/keyboards/planck/keymaps/cbbrowne/Makefile index 3c20da84be..b1c70ace70 100644 --- a/keyboards/planck/keymaps/cbbrowne/Makefile +++ b/keyboards/planck/keymaps/cbbrowne/Makefile @@ -16,7 +16,7 @@ AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -API_SYSEX_ENABLE = no +API_SYSEX_ENABLE = yes # Enable SYSEX API (+5390) # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend From 95a160bf92ebc5b92ef360f1649e2bd5e3ac2000 Mon Sep 17 00:00:00 2001 From: cbbrowne Date: Thu, 1 Dec 2016 16:31:51 -0500 Subject: [PATCH 094/124] Improve docs on memory usage --- readme.md | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/readme.md b/readme.md index 5c82efcddd..afdb03ba54 100644 --- a/readme.md +++ b/readme.md @@ -348,6 +348,10 @@ This allows you output audio on the C6 pin (needs abstracting). See the [audio s Use this to debug changes to variable values, see the [tracing variables](#tracing-variables) section for more information. +`API_SYSEX_ENABLE` + +This enables using the Quantum SYSEX API to send strings (somewhere?) + ### Customizing Makefile options on a per-keymap basis If your keymap directory has a file called `Makefile` (note the filename), any Makefile options you set in that file will take precedence over other Makefile options for your particular keyboard. @@ -1339,6 +1343,9 @@ Size after: 28672/7000h - As long as you have a suitable alternative .hex file around, you can retry, loading that one + - Some of the options you might specify in your keyboard's Makefile + consume extra memory; watch out for BOOTMAGIC_ENABLE, + MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE, API_SYSEX_ENABLE - DFU tools do /not/ allow you to write into the bootloader (unless you throw in extra fruitsalad of options), so there is little risk there. From 570e784140becd8621c4d05e8e36c8b0f8402b3b Mon Sep 17 00:00:00 2001 From: cbbrowne Date: Fri, 2 Dec 2016 12:31:43 -0500 Subject: [PATCH 095/124] I want page-down/page-up - put those on LOWER-Left/Right near bottom corner --- keyboards/planck/keymaps/cbbrowne/keymap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/planck/keymaps/cbbrowne/keymap.c b/keyboards/planck/keymaps/cbbrowne/keymap.c index 4742ca5c06..717f4b2351 100644 --- a/keyboards/planck/keymaps/cbbrowne/keymap.c +++ b/keyboards/planck/keymaps/cbbrowne/keymap.c @@ -62,6 +62,7 @@ - How about Alt-F1 thru Alt-F8? - What's the keystroke to get from X to console these days? - A layer for doing console switching would not be a bad idea + - I haven't got page-up/page-down, let's have that... */ enum layers { @@ -117,7 +118,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, ALTSLASH, _______}, - {_______, KEYPAD, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {_______, KEYPAD, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_VOLD, KC_VOLU, KC_PGUP} }, [_KEYPAD] = { /* Key Pad */ {KC_ESC, USERNAME, MVERSION, KC_F10, KC_F11, KC_F12, KC_PGUP, KC_KP_ENTER, KC_7, KC_8, KC_9, KC_BSPC}, From f6e86cd2c904cc3951b2341b9c73a535dbf28f03 Mon Sep 17 00:00:00 2001 From: cbbrowne Date: Fri, 2 Dec 2016 12:35:03 -0500 Subject: [PATCH 096/124] I also want page-down/page-up on UPPER layer --- keyboards/planck/keymaps/cbbrowne/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/planck/keymaps/cbbrowne/keymap.c b/keyboards/planck/keymaps/cbbrowne/keymap.c index 717f4b2351..2be4dab4b1 100644 --- a/keyboards/planck/keymaps/cbbrowne/keymap.c +++ b/keyboards/planck/keymaps/cbbrowne/keymap.c @@ -112,7 +112,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, QWERTY, KEYPAD, KEYPAD, ALTSLASH,_______}, - {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} + {_______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_VOLD, KC_VOLU, KC_PGUP} }, [_LOWER] = { /* LOWER */ {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, From 5d43a2aecf2fcb9ed9a25ddc0924c66e544bcdf8 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Fri, 2 Dec 2016 12:53:18 -0500 Subject: [PATCH 097/124] Kristian's keymap --- keyboards/ergodox/keymaps/kristian/keymap.c | 79 +++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 keyboards/ergodox/keymaps/kristian/keymap.c diff --git a/keyboards/ergodox/keymaps/kristian/keymap.c b/keyboards/ergodox/keymaps/kristian/keymap.c new file mode 100644 index 0000000000..2238590917 --- /dev/null +++ b/keyboards/ergodox/keymaps/kristian/keymap.c @@ -0,0 +1,79 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" +#include "keymap_fr_ch.h" +#include "keymap_french.h" +#include "keymap_german.h" +#include "keymap_german_ch.h" +#include "keymap_nordic.h" +#include "keymap_norwegian.h" +#include "keymap_spanish.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + +[0] = KEYMAP(NO_LESS,KC_1,KC_2,KC_3,KC_4,KC_5,KC_BSPACE,KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,TG(1),KC_BSPACE,KC_A,KC_S,KC_D,KC_F,KC_G,SFT_T(NO_QUOT),CTL_T(KC_Z),KC_X,KC_C,KC_V,KC_B,SFT_T(KC_EQUAL),MO(1),CTL_T(KC_GRAVE),KC_LGUI,KC_LEFT,KC_RIGHT,KC_ESCAPE,KC_CAPSLOCK,KC_HOME,KC_SPACE,KC_LGUI,KC_LALT,KC_DELETE,KC_6,KC_7,KC_8,KC_9,KC_0,NO_PLUS,TG(1),KC_Y,KC_U,KC_I,KC_O,KC_P,NO_AM,KC_H,KC_J,KC_K,KC_L,LT(2,NO_OSLH),NO_AE,SFT_T(KC_RBRC),KC_N,KC_M,KC_COMMA,KC_DOT,CTL_T(KC_SLASH),SFT_T(NO_QUOT),KC_DOWN,KC_UP,NO_LPRN,NO_RPRN,MO(1),NO_QUOT,CTL_T(KC_ESCAPE),NO_APOS,KC_LALT,KC_LGUI,KC_ENTER), + +[1] = KEYMAP(M(0),KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_BSPACE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_BSPACE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LSHIFT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LCTL,KC_LGUI,KC_LEFT,KC_RIGHT,KC_ESCAPE,KC_TRANSPARENT,KC_HOME,KC_SPACE,KC_LGUI,KC_LALT,KC_DELETE,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_TRANSPARENT,KC_7,KC_8,KC_9,KC_TRANSPARENT,KC_TRANSPARENT,KC_F12,KC_4,KC_5,KC_6,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_0,KC_1,KC_2,KC_3,NO_LBRC,NO_RBRC,KC_LSHIFT,KC_COMMA,KC_DOT,LSFT(NO_LBRC),LSFT(NO_RBRC),KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LALT,KC_LGUI,KC_ENTER), + +[2] = KEYMAP(KC_ESCAPE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MS_UP,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MS_LEFT,KC_MS_DOWN,KC_MS_RIGHT,KC_TRANSPARENT,KC_LSHIFT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LCTL,KC_LALT,KC_LGUI,KC_MS_BTN1,KC_MS_BTN2,KC_ESCAPE,KC_TRANSPARENT,KC_TRANSPARENT,KC_SPACE,KC_LGUI,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MEDIA_PREV_TRACK,KC_MEDIA_PLAY_PAUSE,KC_MEDIA_NEXT_TRACK,KC_TRANSPARENT,KC_TRANSPARENT,KC_AUDIO_VOL_UP,KC_AUDIO_VOL_DOWN,KC_AUDIO_MUTE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_ESCAPE,KC_MS_WH_UP,KC_MS_WH_DOWN,KC_MS_ACCEL0,KC_MS_ACCEL1), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(1) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_3_on(); + break; + case 4: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + break; + case 5: + ergodox_right_led_1_on(); + ergodox_right_led_3_on(); + break; + case 6: + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; + case 7: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; + default: + break; + } + +}; From aa70aa3962f0c148916412eb40924e108b6b5c07 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Fri, 2 Dec 2016 13:03:39 -0500 Subject: [PATCH 098/124] Tweaks Kristian's layout again --- keyboards/ergodox/keymaps/kristian/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/ergodox/keymaps/kristian/keymap.c b/keyboards/ergodox/keymaps/kristian/keymap.c index 2238590917..e7e4243255 100644 --- a/keyboards/ergodox/keymaps/kristian/keymap.c +++ b/keyboards/ergodox/keymaps/kristian/keymap.c @@ -13,7 +13,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP(NO_LESS,KC_1,KC_2,KC_3,KC_4,KC_5,KC_BSPACE,KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,TG(1),KC_BSPACE,KC_A,KC_S,KC_D,KC_F,KC_G,SFT_T(NO_QUOT),CTL_T(KC_Z),KC_X,KC_C,KC_V,KC_B,SFT_T(KC_EQUAL),MO(1),CTL_T(KC_GRAVE),KC_LGUI,KC_LEFT,KC_RIGHT,KC_ESCAPE,KC_CAPSLOCK,KC_HOME,KC_SPACE,KC_LGUI,KC_LALT,KC_DELETE,KC_6,KC_7,KC_8,KC_9,KC_0,NO_PLUS,TG(1),KC_Y,KC_U,KC_I,KC_O,KC_P,NO_AM,KC_H,KC_J,KC_K,KC_L,LT(2,NO_OSLH),NO_AE,SFT_T(KC_RBRC),KC_N,KC_M,KC_COMMA,KC_DOT,CTL_T(KC_SLASH),SFT_T(NO_QUOT),KC_DOWN,KC_UP,NO_LPRN,NO_RPRN,MO(1),NO_QUOT,CTL_T(KC_ESCAPE),NO_APOS,KC_LALT,KC_LGUI,KC_ENTER), +[0] = KEYMAP(NO_LESS,KC_1,KC_2,KC_3,KC_4,KC_5,KC_BSPACE,KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,TG(1),KC_BSPACE,KC_A,KC_S,KC_D,KC_F,KC_G,SFT_T(NO_APOS),CTL_T(KC_Z),KC_X,KC_C,KC_V,KC_B,SFT_T(KC_EQUAL),MO(1),CTL_T(KC_GRAVE),KC_LGUI,KC_LEFT,KC_RIGHT,KC_ESCAPE,KC_CAPSLOCK,KC_HOME,KC_SPACE,KC_LGUI,KC_LALT,KC_DELETE,KC_6,KC_7,KC_8,KC_9,KC_0,NO_PLUS,TG(1),KC_Y,KC_U,KC_I,KC_O,KC_P,NO_AM,KC_H,KC_J,KC_K,KC_L,LT(2,NO_OSLH),NO_AE,SFT_T(KC_RBRC),KC_N,KC_M,KC_COMMA,KC_DOT,CTL_T(KC_SLASH),SFT_T(NO_APOS),KC_DOWN,KC_UP,NO_LPRN,NO_RPRN,MO(1),NO_QUOT,CTL_T(KC_ESCAPE),NO_APOS,KC_LALT,KC_LGUI,KC_ENTER), [1] = KEYMAP(M(0),KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_BSPACE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_BSPACE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LSHIFT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LCTL,KC_LGUI,KC_LEFT,KC_RIGHT,KC_ESCAPE,KC_TRANSPARENT,KC_HOME,KC_SPACE,KC_LGUI,KC_LALT,KC_DELETE,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_TRANSPARENT,KC_7,KC_8,KC_9,KC_TRANSPARENT,KC_TRANSPARENT,KC_F12,KC_4,KC_5,KC_6,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_0,KC_1,KC_2,KC_3,NO_LBRC,NO_RBRC,KC_LSHIFT,KC_COMMA,KC_DOT,LSFT(NO_LBRC),LSFT(NO_RBRC),KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LALT,KC_LGUI,KC_ENTER), From 555e41d9e5f8d393637898e2c77c64066b648245 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Fri, 2 Dec 2016 13:03:51 -0500 Subject: [PATCH 099/124] Annotates nordic --- quantum/keymap_extras/keymap_nordic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/quantum/keymap_extras/keymap_nordic.h b/quantum/keymap_extras/keymap_nordic.h index da5c829757..9b0ef35ca9 100644 --- a/quantum/keymap_extras/keymap_nordic.h +++ b/quantum/keymap_extras/keymap_nordic.h @@ -13,7 +13,7 @@ #define NO_ACUT KC_EQL #define NO_AM KC_LBRC -#define NO_QUOT KC_RBRC +#define NO_QUOT KC_RBRC // this is the "umlaut" char on Nordic keyboards, Apple layout #define NO_AE KC_SCLN #define NO_OSLH KC_QUOT #define NO_APOS KC_NUHS From 245c9508bd6169d2feb398e99234103cc669efa7 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Fri, 2 Dec 2016 13:32:50 -0500 Subject: [PATCH 100/124] adds warnings to 4 keymaps --- keyboards/planck/keymaps/bone2planck/Makefile | 4 +++- keyboards/planck/keymaps/brandon/Makefile | 4 +++- keyboards/planck/keymaps/impossible/Makefile | 4 +++- keyboards/planck/keymaps/jeebak/Makefile | 4 +++- 4 files changed, 12 insertions(+), 4 deletions(-) diff --git a/keyboards/planck/keymaps/bone2planck/Makefile b/keyboards/planck/keymaps/bone2planck/Makefile index 581e08cd02..cf2c31f0fb 100644 --- a/keyboards/planck/keymaps/bone2planck/Makefile +++ b/keyboards/planck/keymaps/bone2planck/Makefile @@ -1,4 +1,6 @@ - +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/planck/keymaps/brandon/Makefile b/keyboards/planck/keymaps/brandon/Makefile index 581e08cd02..cf2c31f0fb 100644 --- a/keyboards/planck/keymaps/brandon/Makefile +++ b/keyboards/planck/keymaps/brandon/Makefile @@ -1,4 +1,6 @@ - +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/planck/keymaps/impossible/Makefile b/keyboards/planck/keymaps/impossible/Makefile index 581e08cd02..cf2c31f0fb 100644 --- a/keyboards/planck/keymaps/impossible/Makefile +++ b/keyboards/planck/keymaps/impossible/Makefile @@ -1,4 +1,6 @@ - +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/planck/keymaps/jeebak/Makefile b/keyboards/planck/keymaps/jeebak/Makefile index 581e08cd02..cf2c31f0fb 100644 --- a/keyboards/planck/keymaps/jeebak/Makefile +++ b/keyboards/planck/keymaps/jeebak/Makefile @@ -1,4 +1,6 @@ - +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options # change to "no" to disable the options, or define them in the Makefile in From cee0cf8a6eca8d2316dd75f39351f13132ff0257 Mon Sep 17 00:00:00 2001 From: cbbrowne Date: Fri, 2 Dec 2016 14:12:55 -0500 Subject: [PATCH 101/124] Adds warnings to Planck keymaps that exceed 0x7000 bytes in size #929 --- keyboards/planck/keymaps/jhenahan/Makefile | 4 +++- keyboards/planck/keymaps/joe/Makefile | 5 ++++- keyboards/planck/keymaps/leo/Makefile | 5 ++++- keyboards/planck/keymaps/lucas/Makefile | 5 ++++- keyboards/planck/keymaps/mollat/Makefile | 5 ++++- keyboards/planck/keymaps/nico/Makefile | 5 ++++- keyboards/planck/keymaps/premek/Makefile | 3 +++ keyboards/planck/keymaps/priyadi/Makefile | 3 +++ keyboards/planck/keymaps/pvc/Makefile | 5 ++++- keyboards/planck/keymaps/sgoodwin/Makefile | 5 ++++- keyboards/planck/keymaps/tak3over/Makefile | 5 ++++- keyboards/planck/keymaps/thermal_printer/Makefile | 3 +++ keyboards/planck/keymaps/vifon/Makefile | 3 +++ 13 files changed, 47 insertions(+), 9 deletions(-) diff --git a/keyboards/planck/keymaps/jhenahan/Makefile b/keyboards/planck/keymaps/jhenahan/Makefile index de01ad2404..83da2a7f89 100644 --- a/keyboards/planck/keymaps/jhenahan/Makefile +++ b/keyboards/planck/keymaps/jhenahan/Makefile @@ -1,4 +1,6 @@ - +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options # change to "no" to disable the options, or define them in the Makefile in diff --git a/keyboards/planck/keymaps/joe/Makefile b/keyboards/planck/keymaps/joe/Makefile index 581e08cd02..b2ca419445 100644 --- a/keyboards/planck/keymaps/joe/Makefile +++ b/keyboards/planck/keymaps/joe/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options @@ -22,4 +25,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR include ../../../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/planck/keymaps/leo/Makefile b/keyboards/planck/keymaps/leo/Makefile index 581e08cd02..b2ca419445 100644 --- a/keyboards/planck/keymaps/leo/Makefile +++ b/keyboards/planck/keymaps/leo/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options @@ -22,4 +25,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR include ../../../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/planck/keymaps/lucas/Makefile b/keyboards/planck/keymaps/lucas/Makefile index 581e08cd02..b2ca419445 100644 --- a/keyboards/planck/keymaps/lucas/Makefile +++ b/keyboards/planck/keymaps/lucas/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options @@ -22,4 +25,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR include ../../../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/planck/keymaps/mollat/Makefile b/keyboards/planck/keymaps/mollat/Makefile index 581e08cd02..b2ca419445 100644 --- a/keyboards/planck/keymaps/mollat/Makefile +++ b/keyboards/planck/keymaps/mollat/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options @@ -22,4 +25,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR include ../../../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/planck/keymaps/nico/Makefile b/keyboards/planck/keymaps/nico/Makefile index 581e08cd02..b2ca419445 100644 --- a/keyboards/planck/keymaps/nico/Makefile +++ b/keyboards/planck/keymaps/nico/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options @@ -22,4 +25,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR include ../../../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/planck/keymaps/premek/Makefile b/keyboards/planck/keymaps/premek/Makefile index 0f4953888d..b2ca419445 100644 --- a/keyboards/planck/keymaps/premek/Makefile +++ b/keyboards/planck/keymaps/premek/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options diff --git a/keyboards/planck/keymaps/priyadi/Makefile b/keyboards/planck/keymaps/priyadi/Makefile index aa211d2f05..f113f496c2 100644 --- a/keyboards/planck/keymaps/priyadi/Makefile +++ b/keyboards/planck/keymaps/priyadi/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options diff --git a/keyboards/planck/keymaps/pvc/Makefile b/keyboards/planck/keymaps/pvc/Makefile index b2ff961fa5..c92ca1bffa 100644 --- a/keyboards/planck/keymaps/pvc/Makefile +++ b/keyboards/planck/keymaps/pvc/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options # change to "no" to disable the options, or define them in the Makefile in @@ -21,4 +24,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR include ../../../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/planck/keymaps/sgoodwin/Makefile b/keyboards/planck/keymaps/sgoodwin/Makefile index 581e08cd02..b2ca419445 100644 --- a/keyboards/planck/keymaps/sgoodwin/Makefile +++ b/keyboards/planck/keymaps/sgoodwin/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options @@ -22,4 +25,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR include ../../../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/planck/keymaps/tak3over/Makefile b/keyboards/planck/keymaps/tak3over/Makefile index 581e08cd02..b2ca419445 100644 --- a/keyboards/planck/keymaps/tak3over/Makefile +++ b/keyboards/planck/keymaps/tak3over/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options @@ -22,4 +25,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR include ../../../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/planck/keymaps/thermal_printer/Makefile b/keyboards/planck/keymaps/thermal_printer/Makefile index 3d1d11877f..9477d1179a 100644 --- a/keyboards/planck/keymaps/thermal_printer/Makefile +++ b/keyboards/planck/keymaps/thermal_printer/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options diff --git a/keyboards/planck/keymaps/vifon/Makefile b/keyboards/planck/keymaps/vifon/Makefile index 838cb4e885..53660a2e76 100644 --- a/keyboards/planck/keymaps/vifon/Makefile +++ b/keyboards/planck/keymaps/vifon/Makefile @@ -1,3 +1,6 @@ +# Please remove if no longer applicable +$(warning THIS FILE MAY BE TOO LARGE FOR YOUR KEYBOARD) +$(warning Please disable some options in the Makefile to resolve) # Build Options From 044fa3ff856393d75a80fe6625b4a5682b81b76d Mon Sep 17 00:00:00 2001 From: Wez Furlong Date: Sun, 27 Nov 2016 22:51:30 -0800 Subject: [PATCH 102/124] Connect the adafruit ble code to the lufa main loop There are now 3 potential locations to send HID reports: 1. USB 2. The bluefruit easy key 3. Adafruit BLE Generally speaking, if USB is connected then we should prefer to send the reports there; it is generally the best channel for this. The bluefruit module has no feedback about bluetooth connectivity so the code must speculatively send reports over both USB and bluetooth. The BLE module has connectivity feedback. In general we want to prefer to send HID reports over USB while connected there, even if BLE is connected. Except that it is convenient to force them over BLE while testing the implementation. This policy has been extracted out into a where_to_send function which returns a bitmask of which of the channels should be used. --- tmk_core/protocol/lufa/lufa.c | 82 ++++++++++++++++++++++++++++++----- 1 file changed, 71 insertions(+), 11 deletions(-) diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 39d4824b6b..ee2552c190 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -52,6 +52,7 @@ #include "descriptor.h" #include "lufa.h" #include "quantum.h" +#include #ifdef NKRO_ENABLE #include "keycode_config.h" @@ -67,13 +68,16 @@ #ifdef BLUETOOTH_ENABLE #include "bluetooth.h" #endif +#ifdef ADAFRUIT_BLE_ENABLE + #include "adafruit_ble.h" +#endif #ifdef VIRTSER_ENABLE #include "virtser.h" #endif #if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE) - #include "rgblight.h" + #include "rgblight.h" #endif #ifdef MIDI_ENABLE @@ -297,7 +301,9 @@ void EVENT_USB_Device_WakeUp() #ifdef CONSOLE_ENABLE static bool console_flush = false; #define CONSOLE_FLUSH_SET(b) do { \ - uint8_t sreg = SREG; cli(); console_flush = b; SREG = sreg; \ + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {\ + console_flush = b; \ + } \ } while (0) // called every 1ms @@ -501,9 +507,35 @@ static uint8_t keyboard_leds(void) return keyboard_led_stats; } +#define SendToUSB 1 +#define SendToBT 2 +#define SendToBLE 4 + +static inline uint8_t where_to_send(void) { +#ifdef ADAFRUIT_BLE_ENABLE +#if 0 + if (adafruit_ble_is_connected()) { + // For testing, send to BLE as a priority + return SendToBLE; + } +#endif + + // This is the real policy + if (USB_DeviceState != DEVICE_STATE_Configured) { + if (adafruit_ble_is_connected()) { + return SendToBLE; + } + } +#endif + return ((USB_DeviceState == DEVICE_STATE_Configured) ? SendToUSB : 0) +#ifdef BLUETOOTH_ENABLE + || SendToBT +#endif + ; +} + static void send_keyboard(report_keyboard_t *report) { - #ifdef BLUETOOTH_ENABLE bluefruit_serial_send(0xFD); for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) { @@ -512,9 +544,17 @@ static void send_keyboard(report_keyboard_t *report) #endif uint8_t timeout = 255; + uint8_t where = where_to_send(); - if (USB_DeviceState != DEVICE_STATE_Configured) - return; +#ifdef ADAFRUIT_BLE_ENABLE + if (where & SendToBLE) { + adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys)); + } +#endif + + if (!(where & SendToUSB)) { + return; + } /* Select the Keyboard Report Endpoint */ #ifdef NKRO_ENABLE @@ -567,8 +607,17 @@ static void send_mouse(report_mouse_t *report) uint8_t timeout = 255; - if (USB_DeviceState != DEVICE_STATE_Configured) - return; + uint8_t where = where_to_send(); + +#ifdef ADAFRUIT_BLE_ENABLE + if (where & SendToBLE) { + // FIXME: mouse buttons + adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h); + } +#endif + if (!(where & SendToUSB)) { + return; + } /* Select the Mouse Report Endpoint */ Endpoint_SelectEndpoint(MOUSE_IN_EPNUM); @@ -626,9 +675,16 @@ static void send_consumer(uint16_t data) #endif uint8_t timeout = 255; + uint8_t where = where_to_send(); - if (USB_DeviceState != DEVICE_STATE_Configured) - return; +#ifdef ADAFRUIT_BLE_ENABLE + if (where & SendToBLE) { + adafruit_ble_send_consumer_key(data, 0); + } +#endif + if (!(where & SendToUSB)) { + return; + } report_extra_t r = { .report_id = REPORT_ID_CONSUMER, @@ -1038,7 +1094,7 @@ int main(void) print("Keyboard start.\n"); while (1) { - #ifndef BLUETOOTH_ENABLE + #if !defined(BLUETOOTH_ENABLE) && !defined(ADAFRUIT_BLE_ENABLE) while (USB_DeviceState == DEVICE_STATE_Suspended) { print("[s]"); suspend_power_down(); @@ -1054,11 +1110,15 @@ int main(void) midi_device_process(&midi_device); // MIDI_Task(); #endif - + #if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE) rgblight_task(); #endif +#ifdef ADAFRUIT_BLE_ENABLE + adafruit_ble_task(); +#endif + #ifdef VIRTSER_ENABLE virtser_task(); CDC_Device_USBTask(&cdc_device); From d639e08a3131892c608760df4e3806d843a91176 Mon Sep 17 00:00:00 2001 From: ofples Date: Sat, 3 Dec 2016 13:05:02 +0200 Subject: [PATCH 103/124] Refactored and improved ps2 mouse feature --- tmk_core/protocol/ps2_mouse.c | 369 ++++++++++++++++++++-------------- tmk_core/protocol/ps2_mouse.h | 81 +++++++- 2 files changed, 286 insertions(+), 164 deletions(-) diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index 82f6966e8e..f247ba8dca 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -18,63 +18,99 @@ along with this program. If not, see . #include #include #include -#include "ps2.h" #include "ps2_mouse.h" -#include "report.h" #include "host.h" #include "timer.h" #include "print.h" +#include "report.h" #include "debug.h" +#include "ps2.h" -#ifndef PS2_INIT_DELAY -#define PS2_INIT_DELAY 1000 -#endif +/* ============================= MACROS ============================ */ + +#define PS2_MOUSE_SEND(command, message) \ +do { \ + uint8_t rcv = ps2_host_send(command); \ + if (debug_mouse) { \ + print((message)); \ + xprintf(" command: %X, result: %X, error: %X \n", command, rcv, ps2_error); \ + } \ +} while(0) + +#define PS2_MOUSE_SEND_SAFE(command, message) \ +do { \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_disable_data_reporting(); \ + } \ + PS2_MOUSE_SEND(command, message); \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_enable_data_reporting(); \ + } \ +} while(0) + +#define PS2_MOUSE_SET_SAFE(command, value, message) \ +do { \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_disable_data_reporting(); \ + } \ + PS2_MOUSE_SEND(command, message); \ + PS2_MOUSE_SEND(value, "Sending value"); \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_enable_data_reporting(); \ + } \ +} while(0) + +#define PS2_MOUSE_RECEIVE(message) \ +do { \ + uint8_t rcv = ps2_host_recv_response(); \ + if (debug_mouse) { \ + print((message)); \ + xprintf(" result: %X, error: %X \n", rcv, ps2_error); \ + } \ +} while(0) + +static enum ps2_mouse_mode_e { + PS2_MOUSE_STREAM_MODE, + PS2_MOUSE_REMOTE_MODE, +} ps2_mouse_mode = PS2_MOUSE_STREAM_MODE; static report_mouse_t mouse_report = {}; +static inline void ps2_mouse_print_report(report_mouse_t *mouse_report); +static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report); +static inline void ps2_mouse_clear_report(report_mouse_t *mouse_report); +static inline void ps2_mouse_enable_scrolling(void); +static inline void ps2_mouse_scroll_button_task(report_mouse_t *mouse_report); -static void print_usb_data(void); - +/* ============================= IMPLEMENTATION ============================ */ /* supports only 3 button mouse at this time */ -uint8_t ps2_mouse_init(void) { - uint8_t rcv; - +void ps2_mouse_init(void) { ps2_host_init(); - _delay_ms(PS2_INIT_DELAY); // wait for powering up + _delay_ms(1000); // wait for powering up - // send Reset - rcv = ps2_host_send(0xFF); - print("ps2_mouse_init: send Reset: "); - phex(rcv); phex(ps2_error); print("\n"); + PS2_MOUSE_SEND(PS2_MOUSE_RESET, "ps2_mouse_init: sending reset"); - // read completion code of BAT - rcv = ps2_host_recv_response(); - print("ps2_mouse_init: read BAT: "); - phex(rcv); phex(ps2_error); print("\n"); + PS2_MOUSE_RECEIVE("ps2_mouse_init: read BAT"); + PS2_MOUSE_RECEIVE("ps2_mouse_init: read DevID"); - // read Device ID - rcv = ps2_host_recv_response(); - print("ps2_mouse_init: read DevID: "); - phex(rcv); phex(ps2_error); print("\n"); +#ifdef PS2_MOUSE_USE_REMOTE_MODE + ps2_mouse_set_remote_mode(); +#else + ps2_mouse_enable_data_reporting(); +#endif - // send Set Remote mode - rcv = ps2_host_send(0xF0); - print("ps2_mouse_init: send 0xF0: "); - phex(rcv); phex(ps2_error); print("\n"); +#ifdef PS2_MOUSE_ENABLE_SCROLLING + ps2_mouse_enable_scrolling(); +#endif - return 0; +#ifdef PS2_MOUSE_USE_2_1_SCALING + ps2_mouse_set_scaling_2_1(); +#endif } -#define X_IS_NEG (mouse_report.buttons & (1<buttons & (1<buttons & (1<buttons & (1<buttons & (1<x = X_IS_NEG ? + ((!X_IS_OVF && -127 <= mouse_report->x && mouse_report->x <= -1) ? mouse_report->x : -127) : + ((!X_IS_OVF && 0 <= mouse_report->x && mouse_report->x <= 127) ? mouse_report->x : 127); + mouse_report->y = Y_IS_NEG ? + ((!Y_IS_OVF && -127 <= mouse_report->y && mouse_report->y <= -1) ? mouse_report->y : -127) : + ((!Y_IS_OVF && 0 <= mouse_report->y && mouse_report->y <= 127) ? mouse_report->y : 127); + + // remove sign and overflow flags + mouse_report->buttons &= PS2_MOUSE_BTN_MASK; + + // invert coordinate of y to conform to USB HID mouse + mouse_report->y = -mouse_report->y; } -static void print_usb_data(void) -{ +static inline void ps2_mouse_clear_report(report_mouse_t *mouse_report) { + mouse_report->x = 0; + mouse_report->y = 0; + mouse_report->v = 0; + mouse_report->h = 0; + mouse_report->buttons = 0; +} + +static inline void ps2_mouse_print_report(report_mouse_t *mouse_report) { if (!debug_mouse) return; - print("ps2_mouse usb: ["); - phex(mouse_report.buttons); print("|"); - print_hex8((uint8_t)mouse_report.x); print(" "); - print_hex8((uint8_t)mouse_report.y); print(" "); - print_hex8((uint8_t)mouse_report.v); print(" "); - print_hex8((uint8_t)mouse_report.h); print("]\n"); + print("ps2_mouse: ["); + phex(mouse_report->buttons); print("|"); + print_hex8((uint8_t)mouse_report->x); print(" "); + print_hex8((uint8_t)mouse_report->y); print(" "); + print_hex8((uint8_t)mouse_report->v); print(" "); + print_hex8((uint8_t)mouse_report->h); print("]\n"); +} + +static inline void ps2_mouse_enable_scrolling(void) { + PS2_MOUSE_SEND(PS2_MOUSE_SET_SAMPLE_RATE, "Initiaing scroll wheel enable: Set sample rate"); + PS2_MOUSE_SEND(200, "200"); + PS2_MOUSE_SEND(PS2_MOUSE_SET_SAMPLE_RATE, "Set sample rate"); + PS2_MOUSE_SEND(100, "100"); + PS2_MOUSE_SEND(PS2_MOUSE_SET_SAMPLE_RATE, "Set sample rate"); + PS2_MOUSE_SEND(80, "80"); + PS2_MOUSE_SEND(PS2_MOUSE_GET_DEVICE_ID, "Finished enabling scroll wheel"); + _delay_ms(20); } +#define PRESS_SCROLL_BUTTONS mouse_report->buttons |= (PS2_MOUSE_SCROLL_BTN_MASK) +#define RELEASE_SCROLL_BUTTONS mouse_report->buttons &= ~(PS2_MOUSE_SCROLL_BTN_MASK) +static inline void ps2_mouse_scroll_button_task(report_mouse_t *mouse_report) { + static enum { + SCROLL_NONE, + SCROLL_BTN, + SCROLL_SENT, + } scroll_state = SCROLL_NONE; + static uint16_t scroll_button_time = 0; + + if (PS2_MOUSE_SCROLL_BTN_MASK == (mouse_report->buttons & (PS2_MOUSE_SCROLL_BTN_MASK))) { + // All scroll buttons are pressed + + if (scroll_state == SCROLL_NONE) { + scroll_button_time = timer_read(); + scroll_state = SCROLL_BTN; + } + + // If the mouse has moved, update the report to scroll instead of move the mouse + if (mouse_report->x || mouse_report->y) { + scroll_state = SCROLL_SENT; + mouse_report->v = -mouse_report->y/(PS2_MOUSE_SCROLL_DIVISOR_V); + mouse_report->h = mouse_report->x/(PS2_MOUSE_SCROLL_DIVISOR_H); + mouse_report->x = 0; + mouse_report->y = 0; + } + } else if (0 == (PS2_MOUSE_SCROLL_BTN_MASK & mouse_report->buttons)) { + // None of the scroll buttons are pressed + +#if PS2_MOUSE_SCROLL_BTN_SEND + if (scroll_state == SCROLL_BTN + && timer_elapsed(scroll_button_time) < PS2_MOUSE_SCROLL_BTN_SEND) { + PRESS_SCROLL_BUTTONS; + host_mouse_send(mouse_report); + _delay_ms(100); + RELEASE_SCROLL_BUTTONS; + } +#endif + scroll_state = SCROLL_NONE; + } -/* PS/2 Mouse Synopsis - * http://www.computer-engineering.org/ps2mouse/ - * - * Command: - * 0xFF: Reset - * 0xF6: Set Defaults Sampling; rate=100, resolution=4cnt/mm, scaling=1:1, reporting=disabled - * 0xF5: Disable Data Reporting - * 0xF4: Enable Data Reporting - * 0xF3: Set Sample Rate - * 0xF2: Get Device ID - * 0xF0: Set Remote Mode - * 0xEB: Read Data - * 0xEA: Set Stream Mode - * 0xE9: Status Request - * 0xE8: Set Resolution - * 0xE7: Set Scaling 2:1 - * 0xE6: Set Scaling 1:1 - * - * Mode: - * Stream Mode: devices sends the data when it changs its state - * Remote Mode: host polls the data periodically - * - * This code uses Remote Mode and polls the data with Read Data(0xEB). - * - * Data format: - * byte|7 6 5 4 3 2 1 0 - * ----+-------------------------------------------------------------- - * 0|Yovflw Xovflw Ysign Xsign 1 Middle Right Left - * 1| X movement - * 2| Y movement - */ + RELEASE_SCROLL_BUTTONS; +} \ No newline at end of file diff --git a/tmk_core/protocol/ps2_mouse.h b/tmk_core/protocol/ps2_mouse.h index 27d9790d43..3b498059dc 100644 --- a/tmk_core/protocol/ps2_mouse.h +++ b/tmk_core/protocol/ps2_mouse.h @@ -20,15 +20,13 @@ along with this program. If not, see . #include -#define PS2_MOUSE_READ_DATA 0xEB - /* * Data format: * byte|7 6 5 4 3 2 1 0 - * ----+-------------------------------------------------------------- - * 0|Yovflw Xovflw Ysign Xsign 1 Middle Right Left - * 1| X movement(0-255) - * 2| Y movement(0-255) + * ----+---------------------------------------------------------------- + * 0|[Yovflw][Xovflw][Ysign ][Xsign ][ 1 ][Middle][Right ][Left ] + * 1|[ X movement(0-255) ] + * 2|[ Y movement(0-255) ] */ #define PS2_MOUSE_BTN_MASK 0x07 #define PS2_MOUSE_BTN_LEFT 0 @@ -39,10 +37,6 @@ along with this program. If not, see . #define PS2_MOUSE_X_OVFLW 6 #define PS2_MOUSE_Y_OVFLW 7 - -/* - * Scroll by mouse move with pressing button - */ /* mouse button to start scrolling; set 0 to disable scroll */ #ifndef PS2_MOUSE_SCROLL_BTN_MASK #define PS2_MOUSE_SCROLL_BTN_MASK (1<. #ifndef PS2_MOUSE_SCROLL_DIVISOR_H #define PS2_MOUSE_SCROLL_DIVISOR_H 2 #endif +/* multiply reported mouse values by these */ +#ifndef PS2_MOUSE_X_MULTIPLIER +#define PS2_MOUSE_X_MULTIPLIER 1 +#endif +#ifndef PS2_MOUSE_Y_MULTIPLIER +#define PS2_MOUSE_Y_MULTIPLIER 1 +#endif +#ifndef PS2_MOUSE_V_MULTIPLIER +#define PS2_MOUSE_V_MULTIPLIER 1 +#endif +/* For some mice this will need to be 0x0F */ +#ifndef PS2_MOUSE_SCROLL_MASK +#define PS2_MOUSE_SCROLL_MASK 0xFF +#endif + +enum ps2_mouse_command_e { + PS2_MOUSE_RESET = 0xFF, + PS2_MOUSE_RESEND = 0xFE, + PS2_MOSUE_SET_DEFAULTS = 0xF6, + PS2_MOUSE_DISABLE_DATA_REPORTING = 0xF5, + PS2_MOUSE_ENABLE_DATA_REPORTING = 0xF4, + PS2_MOUSE_SET_SAMPLE_RATE = 0xF3, + PS2_MOUSE_GET_DEVICE_ID = 0xF2, + PS2_MOUSE_SET_REMOTE_MODE = 0xF0, + PS2_MOUSE_SET_WRAP_MODE = 0xEC, + PS2_MOUSE_READ_DATA = 0xEB, + PS2_MOUSE_SET_STREAM_MODE = 0xEA, + PS2_MOUSE_STATUS_REQUEST = 0xE9, + PS2_MOUSE_SET_RESOLUTION = 0xE8, + PS2_MOUSE_SET_SCALING_2_1 = 0xE7, + PS2_MOUSE_SET_SCALING_1_1 = 0xE6, +}; + +typedef enum ps2_mouse_resolution_e { + PS2_MOUSE_1_COUNT_MM, + PS2_MOUSE_2_COUNT_MM, + PS2_MOUSE_4_COUNT_MM, + PS2_MOUSE_8_COUNT_MM, +} ps2_mouse_resolution_t; +typedef enum ps2_mouse_sample_rate_e { + PS2_MOUSE_10_SAMPLES_SEC = 10, + PS2_MOUSE_20_SAMPLES_SEC = 20, + PS2_MOUSE_40_SAMPLES_SEC = 40, + PS2_MOUSE_60_SAMPLES_SEC = 60, + PS2_MOUSE_80_SAMPLES_SEC = 80, + PS2_MOUSE_100_SAMPLES_SEC = 100, + PS2_MOUSE_200_SAMPLES_SEC = 200, +} ps2_mouse_sample_rate_t; + +void ps2_mouse_init(void); -uint8_t ps2_mouse_init(void); void ps2_mouse_task(void); +void ps2_mouse_disable_data_reporting(void); + +void ps2_mouse_enable_data_reporting(void); + +void ps2_mouse_set_remote_mode(void); + +void ps2_mouse_set_stream_mode(void); + +void ps2_mouse_set_scaling_2_1(void); + +void ps2_mouse_set_scaling_1_1(void); + +void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution); + +void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate); + #endif From 9f41544e1de12b92bdc15538ec7a9e66a4af0c43 Mon Sep 17 00:00:00 2001 From: Ofer Plesser Date: Sat, 3 Dec 2016 13:09:42 +0200 Subject: [PATCH 104/124] Added back PS2_MOUSE_INIT_DELAY define --- tmk_core/protocol/ps2_mouse.c | 2 +- tmk_core/protocol/ps2_mouse.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index f247ba8dca..04c15dd4fd 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -283,4 +283,4 @@ static inline void ps2_mouse_scroll_button_task(report_mouse_t *mouse_report) { } RELEASE_SCROLL_BUTTONS; -} \ No newline at end of file +} diff --git a/tmk_core/protocol/ps2_mouse.h b/tmk_core/protocol/ps2_mouse.h index 3b498059dc..e11c705fc6 100644 --- a/tmk_core/protocol/ps2_mouse.h +++ b/tmk_core/protocol/ps2_mouse.h @@ -66,6 +66,9 @@ along with this program. If not, see . #ifndef PS2_MOUSE_SCROLL_MASK #define PS2_MOUSE_SCROLL_MASK 0xFF #endif +#ifndef PS2_MOUSE_INIT_DELAY +#define PS2_MOUSE_INIT_DELAY 1000 +#endif enum ps2_mouse_command_e { PS2_MOUSE_RESET = 0xFF, From 8e2732edf3c457d98dd4526d88dad26786cb3db9 Mon Sep 17 00:00:00 2001 From: Ofer Plesser Date: Sat, 3 Dec 2016 13:11:37 +0200 Subject: [PATCH 105/124] Updated ps2 mouse documentation in readme --- readme.md | 112 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 111 insertions(+), 1 deletion(-) diff --git a/readme.md b/readme.md index be15108329..1f06fe79fa 100644 --- a/readme.md +++ b/readme.md @@ -1191,7 +1191,7 @@ Please note the USB port can only supply a limited amount of power to the keyboa Its possible to hook up a PS/2 mouse (for example touchpads or trackpoints) to your keyboard as a composite device. -Then, decide whether to use USART (best), interrupts (better) or busywait (not recommended), and enable the relevant option. +There are three available modes for hooking up PS/2 devices: USART (best), interrupts (better) or busywait (not recommended). ### Busywait version @@ -1316,6 +1316,116 @@ In your keyboard config.h: #endif ``` +### Additional Settings + +#### PS/2 mouse features + +These enable settings supported by the PS/2 mouse protocol: http://www.computer-engineering.org/ps2mouse/ + +``` +/* Use remote mode instead of the default stream mode (see link) */ +#define PS2_MOUSE_USE_REMOTE_MODE + +/* Enable the scrollwheel or scroll gesture on your mouse or touchpad */ +#define PS2_MOUSE_ENABLE_SCROLLING + +/* Some mice will need a scroll mask to be configured. The default is 0xFF. */ +#define PS2_MOUSE_SCROLL_MASK 0x0F + +/* Applies a transformation to the movement before sending to the host (see link) */ +#define PS2_MOUSE_USE_2_1_SCALING + +/* The time to wait after initializing the ps2 host */ +#define PS2_MOUSE_INIT_DELAY 1000 /* Default */ +``` + +You can also call the following functions from ps2_mouse.h + +``` +void ps2_mouse_disable_data_reporting(void); + +void ps2_mouse_enable_data_reporting(void); + +void ps2_mouse_set_remote_mode(void); + +void ps2_mouse_set_stream_mode(void); + +void ps2_mouse_set_scaling_2_1(void); + +void ps2_mouse_set_scaling_1_1(void); + +void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution); + +void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate); +``` + +#### Fine control + +Use the following defines to change the sensitivity and speed of the mouse. +Note: you can also use `ps2_mouse_set_resolution` for the same effect (not supported on most touchpads). + +``` +#define PS2_MOUSE_X_MULTIPLIER 3 +#define PS2_MOUSE_Y_MULTIPLIER 3 +#define PS2_MOUSE_V_MULTIPLIER 1 +``` + +#### Scroll button + +If you're using a trackpoint, you will likely want to be able to use it for scrolling. +Its possible to enable a "scroll button/s" that when pressed will cause the mouse to scroll instead of moving. +To enable the feature, you must set a scroll button mask as follows: + +``` +#define PS2_MOUSE_SCROLL_BTN_MASK (1< Date: Sat, 3 Dec 2016 13:41:56 +0200 Subject: [PATCH 106/124] Forgot to use define in delay instead of hardcoded number --- tmk_core/protocol/ps2_mouse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index 04c15dd4fd..af971dd497 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -88,7 +88,7 @@ static inline void ps2_mouse_scroll_button_task(report_mouse_t *mouse_report); void ps2_mouse_init(void) { ps2_host_init(); - _delay_ms(1000); // wait for powering up + _delay_ms(PS2_MOUSE_INIT_DELAY); // wait for powering up PS2_MOUSE_SEND(PS2_MOUSE_RESET, "ps2_mouse_init: sending reset"); From f39e1b5dfe7552f01dbc6eab95c268f41a9d98e2 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sat, 3 Dec 2016 14:36:39 -0500 Subject: [PATCH 107/124] cleans-up formatting of readme --- readme.md | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/readme.md b/readme.md index 1f06fe79fa..b618334dc3 100644 --- a/readme.md +++ b/readme.md @@ -1442,13 +1442,16 @@ what things are (and likely aren't) too risky. flash the keyboard, leaving it in DFU mode. - To this end, note that the maximum .hex file size on Planck is 7000h (28672 decimal) -```Linking: .build/planck_rev4_cbbrowne.elf [OK] + +``` +Linking: .build/planck_rev4_cbbrowne.elf [OK] Creating load file for Flash: .build/planck_rev4_cbbrowne.hex [OK] Size after: text data bss dec hex filename 0 22396 0 22396 577c planck_rev4_cbbrowne.hex ``` + - The above file is of size 22396/577ch, which is less than 28672/7000h - As long as you have a suitable alternative .hex file around, you From ae66f0d70214b8a5e81ecf5977619bcd4bf6f413 Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 3 Dec 2016 17:09:11 -0500 Subject: [PATCH 108/124] added plate files for lets split --- keyboards/pilcrow/Makefile | 3 + keyboards/pilcrow/config.h | 162 + keyboards/pilcrow/keymaps/default/Makefile | 21 + keyboards/pilcrow/keymaps/default/config.h | 8 + keyboards/pilcrow/keymaps/default/keymap.c | 88 + keyboards/pilcrow/keymaps/default/readme.md | 1 + keyboards/pilcrow/pilcrow.c | 28 + keyboards/pilcrow/pilcrow.h | 23 + keyboards/pilcrow/readme.md | 28 + keyboards/pilcrow/rules.mk | 67 + keyboards/weebkeeb/Makefile | 3 + keyboards/weebkeeb/aek.dxf | 6486 ++++++++++++++++++ keyboards/weebkeeb/config.h | 162 + keyboards/weebkeeb/keymaps/default/Makefile | 21 + keyboards/weebkeeb/keymaps/default/config.h | 8 + keyboards/weebkeeb/keymaps/default/keymap.c | 119 + keyboards/weebkeeb/keymaps/default/readme.md | 1 + keyboards/weebkeeb/readme.md | 28 + keyboards/weebkeeb/rules.mk | 67 + keyboards/weebkeeb/weebkeeb.c | 28 + keyboards/weebkeeb/weebkeeb.h | 23 + 21 files changed, 7375 insertions(+) create mode 100644 keyboards/pilcrow/Makefile create mode 100644 keyboards/pilcrow/config.h create mode 100644 keyboards/pilcrow/keymaps/default/Makefile create mode 100644 keyboards/pilcrow/keymaps/default/config.h create mode 100644 keyboards/pilcrow/keymaps/default/keymap.c create mode 100644 keyboards/pilcrow/keymaps/default/readme.md create mode 100644 keyboards/pilcrow/pilcrow.c create mode 100644 keyboards/pilcrow/pilcrow.h create mode 100644 keyboards/pilcrow/readme.md create mode 100644 keyboards/pilcrow/rules.mk create mode 100644 keyboards/weebkeeb/Makefile create mode 100644 keyboards/weebkeeb/aek.dxf create mode 100644 keyboards/weebkeeb/config.h create mode 100644 keyboards/weebkeeb/keymaps/default/Makefile create mode 100644 keyboards/weebkeeb/keymaps/default/config.h create mode 100644 keyboards/weebkeeb/keymaps/default/keymap.c create mode 100644 keyboards/weebkeeb/keymaps/default/readme.md create mode 100644 keyboards/weebkeeb/readme.md create mode 100644 keyboards/weebkeeb/rules.mk create mode 100644 keyboards/weebkeeb/weebkeeb.c create mode 100644 keyboards/weebkeeb/weebkeeb.h diff --git a/keyboards/pilcrow/Makefile b/keyboards/pilcrow/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/pilcrow/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/pilcrow/config.h b/keyboards/pilcrow/config.h new file mode 100644 index 0000000000..d79c1ba40c --- /dev/null +++ b/keyboards/pilcrow/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT pilcrow +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B2, C6, D7, E6 } +#define MATRIX_COL_PINS { B6, D1, B4, B5, D4, D0, B3, B1, F7, F6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/pilcrow/keymaps/default/Makefile b/keyboards/pilcrow/keymaps/default/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/config.h b/keyboards/pilcrow/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/keymap.c b/keyboards/pilcrow/keymaps/default/keymap.c new file mode 100644 index 0000000000..e382e4c6ad --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/keymap.c @@ -0,0 +1,88 @@ +#include "pilcrow.h" +#define _______ KC_TRNS +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ + KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MT(MOD_LSFT, KC_SPC), MO(2), MO(3), KC_DEL, KC_ESC \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[1] = KEYMAP( \ + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \ + _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \ +), +[2] = KEYMAP( \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ + KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ + OSM(MOD_LSFT), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \ + _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[3] = KEYMAP( \ + RESET, KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \ + KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON, AU_OFF, AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \ + RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \ + _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \ +) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/readme.md b/keyboards/pilcrow/keymaps/default/readme.md new file mode 100644 index 0000000000..95472dfca8 --- /dev/null +++ b/keyboards/pilcrow/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for pilcrow \ No newline at end of file diff --git a/keyboards/pilcrow/pilcrow.c b/keyboards/pilcrow/pilcrow.c new file mode 100644 index 0000000000..c8243df7bf --- /dev/null +++ b/keyboards/pilcrow/pilcrow.c @@ -0,0 +1,28 @@ +#include "pilcrow.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/pilcrow/pilcrow.h b/keyboards/pilcrow/pilcrow.h new file mode 100644 index 0000000000..7138ccb3f6 --- /dev/null +++ b/keyboards/pilcrow/pilcrow.h @@ -0,0 +1,23 @@ +#ifndef PILCROW_H +#define PILCROW_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \ +} + +#endif diff --git a/keyboards/pilcrow/readme.md b/keyboards/pilcrow/readme.md new file mode 100644 index 0000000000..7a7f6d2af5 --- /dev/null +++ b/keyboards/pilcrow/readme.md @@ -0,0 +1,28 @@ +pilcrow keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|] +``` + +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/pilcrow/rules.mk b/keyboards/pilcrow/rules.mk new file mode 100644 index 0000000000..55898147dd --- /dev/null +++ b/keyboards/pilcrow/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/weebkeeb/Makefile b/keyboards/weebkeeb/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/weebkeeb/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/weebkeeb/aek.dxf b/keyboards/weebkeeb/aek.dxf new file mode 100644 index 0000000000..cfe80946bd --- /dev/null +++ b/keyboards/weebkeeb/aek.dxf @@ -0,0 +1,6486 @@ +0 +SECTION +2 +ENTITIES +0 +LINE +8 +0 +10 +104.7875 +20 +-89.2875 +11 +104.7875 +21 +-91.6875 +0 +LINE +8 +0 +10 +104.7875 +20 +-91.6875 +11 +102.3875 +21 +-91.6875 +0 +LINE +8 +0 +10 +102.3875 +20 +-91.6875 +11 +102.3875 +21 +-89.2875 +0 +LINE +8 +0 +10 +102.3875 +20 +-89.2875 +11 +104.7875 +21 +-89.2875 +0 +LINE +8 +0 +10 +116.8875 +20 +-89.2875 +11 +116.8875 +21 +-91.6875 +0 +LINE +8 +0 +10 +116.8875 +20 +-91.6875 +11 +114.4875 +21 +-91.6875 +0 +LINE +8 +0 +10 +114.4875 +20 +-91.6875 +11 +114.4875 +21 +-89.2875 +0 +LINE +8 +0 +10 +114.4875 +20 +-89.2875 +11 +116.8875 +21 +-89.2875 +0 +CIRCLE +8 +0 +10 +109.6375 +20 +-90.4875 +40 +3.15 +0 +LINE +8 +0 +10 +103.4875 +20 +-94.3875 +11 +103.4875 +21 +-99.4875 +0 +LINE +8 +0 +10 +103.4875 +20 +-99.4875 +11 +100.8875 +21 +-99.4875 +0 +LINE +8 +0 +10 +100.8875 +20 +-99.4875 +11 +100.8875 +21 +-94.3875 +0 +LINE +8 +0 +10 +100.8875 +20 +-94.3875 +11 +103.4875 +21 +-94.3875 +0 +LINE +8 +0 +10 +191.7875 +20 +-94.3875 +11 +191.7875 +21 +-99.4875 +0 +LINE +8 +0 +10 +191.7875 +20 +-99.4875 +11 +194.3875 +21 +-99.4875 +0 +LINE +8 +0 +10 +194.3875 +20 +-99.4875 +11 +194.3875 +21 +-94.3875 +0 +LINE +8 +0 +10 +194.3875 +20 +-94.3875 +11 +191.7875 +21 +-94.3875 +0 +LINE +8 +0 +10 +155.3875 +20 +-84.0875 +11 +139.8875 +21 +-84.0875 +0 +LINE +8 +0 +10 +139.8875 +20 +-84.0875 +11 +139.8875 +21 +-96.8875 +0 +LINE +8 +0 +10 +139.8875 +20 +-96.8875 +11 +155.3875 +21 +-96.8875 +0 +LINE +8 +0 +10 +155.3875 +20 +-96.8875 +11 +155.3875 +21 +-84.0875 +0 +LINE +8 +0 +10 +256.28125 +20 +-56.2875 +11 +256.28125 +21 +-61.3875 +0 +LINE +8 +0 +10 +256.28125 +20 +-61.3875 +11 +253.68125 +21 +-61.3875 +0 +LINE +8 +0 +10 +253.68125 +20 +-61.3875 +11 +253.68125 +21 +-56.2875 +0 +LINE +8 +0 +10 +253.68125 +20 +-56.2875 +11 +256.28125 +21 +-56.2875 +0 +LINE +8 +0 +10 +281.88125 +20 +-56.2875 +11 +281.88125 +21 +-61.3875 +0 +LINE +8 +0 +10 +281.88125 +20 +-61.3875 +11 +284.48125 +21 +-61.3875 +0 +LINE +8 +0 +10 +284.48125 +20 +-61.3875 +11 +284.48125 +21 +-56.2875 +0 +LINE +8 +0 +10 +284.48125 +20 +-56.2875 +11 +281.88125 +21 +-56.2875 +0 +LINE +8 +0 +10 +276.83125 +20 +-45.9875 +11 +261.33125 +21 +-45.9875 +0 +LINE +8 +0 +10 +261.33125 +20 +-45.9875 +11 +261.33125 +21 +-58.7875 +0 +LINE +8 +0 +10 +261.33125 +20 +-58.7875 +11 +276.83125 +21 +-58.7875 +0 +LINE +8 +0 +10 +276.83125 +20 +-58.7875 +11 +276.83125 +21 +-45.9875 +0 +LINE +8 +0 +10 +258.6625 +20 +-18.1875 +11 +258.6625 +21 +-23.2875 +0 +LINE +8 +0 +10 +258.6625 +20 +-23.2875 +11 +256.0625 +21 +-23.2875 +0 +LINE +8 +0 +10 +256.0625 +20 +-23.2875 +11 +256.0625 +21 +-18.1875 +0 +LINE +8 +0 +10 +256.0625 +20 +-18.1875 +11 +258.6625 +21 +-18.1875 +0 +LINE +8 +0 +10 +284.2625 +20 +-18.1875 +11 +284.2625 +21 +-23.2875 +0 +LINE +8 +0 +10 +284.2625 +20 +-23.2875 +11 +286.8625 +21 +-23.2875 +0 +LINE +8 +0 +10 +286.8625 +20 +-23.2875 +11 +286.8625 +21 +-18.1875 +0 +LINE +8 +0 +10 +286.8625 +20 +-18.1875 +11 +284.2625 +21 +-18.1875 +0 +LINE +8 +0 +10 +279.2125 +20 +-7.8875 +11 +263.7125 +21 +-7.8875 +0 +LINE +8 +0 +10 +263.7125 +20 +-7.8875 +11 +263.7125 +21 +-20.6875 +0 +LINE +8 +0 +10 +263.7125 +20 +-20.6875 +11 +279.2125 +21 +-20.6875 +0 +LINE +8 +0 +10 +279.2125 +20 +-20.6875 +11 +279.2125 +21 +-7.8875 +0 +LINE +8 +0 +10 +13.39375 +20 +-75.3375 +11 +13.39375 +21 +-80.4375 +0 +LINE +8 +0 +10 +13.39375 +20 +-80.4375 +11 +10.79375 +21 +-80.4375 +0 +LINE +8 +0 +10 +10.79375 +20 +-80.4375 +11 +10.79375 +21 +-75.3375 +0 +LINE +8 +0 +10 +10.79375 +20 +-75.3375 +11 +13.39375 +21 +-75.3375 +0 +LINE +8 +0 +10 +38.99375 +20 +-75.3375 +11 +38.99375 +21 +-80.4375 +0 +LINE +8 +0 +10 +38.99375 +20 +-80.4375 +11 +41.59375 +21 +-80.4375 +0 +LINE +8 +0 +10 +41.59375 +20 +-80.4375 +11 +41.59375 +21 +-75.3375 +0 +LINE +8 +0 +10 +41.59375 +20 +-75.3375 +11 +38.99375 +21 +-75.3375 +0 +LINE +8 +0 +10 +33.94375 +20 +-65.0375 +11 +18.44375 +21 +-65.0375 +0 +LINE +8 +0 +10 +18.44375 +20 +-65.0375 +11 +18.44375 +21 +-77.8375 +0 +LINE +8 +0 +10 +18.44375 +20 +-77.8375 +11 +33.94375 +21 +-77.8375 +0 +LINE +8 +0 +10 +33.94375 +20 +-77.8375 +11 +33.94375 +21 +-65.0375 +0 +LINE +8 +0 +10 +193.4875 +20 +-7.8875 +11 +177.9875 +21 +-7.8875 +0 +LINE +8 +0 +10 +177.9875 +20 +-7.8875 +11 +177.9875 +21 +-20.6875 +0 +LINE +8 +0 +10 +177.9875 +20 +-20.6875 +11 +193.4875 +21 +-20.6875 +0 +LINE +8 +0 +10 +193.4875 +20 +-20.6875 +11 +193.4875 +21 +-7.8875 +0 +LINE +8 +0 +10 +174.4375 +20 +-7.8875 +11 +158.9375 +21 +-7.8875 +0 +LINE +8 +0 +10 +158.9375 +20 +-7.8875 +11 +158.9375 +21 +-20.6875 +0 +LINE +8 +0 +10 +158.9375 +20 +-20.6875 +11 +174.4375 +21 +-20.6875 +0 +LINE +8 +0 +10 +174.4375 +20 +-20.6875 +11 +174.4375 +21 +-7.8875 +0 +LINE +8 +0 +10 +183.9625 +20 +-26.9375 +11 +168.4625 +21 +-26.9375 +0 +LINE +8 +0 +10 +168.4625 +20 +-26.9375 +11 +168.4625 +21 +-39.7375 +0 +LINE +8 +0 +10 +168.4625 +20 +-39.7375 +11 +183.9625 +21 +-39.7375 +0 +LINE +8 +0 +10 +183.9625 +20 +-39.7375 +11 +183.9625 +21 +-26.9375 +0 +LINE +8 +0 +10 +169.675 +20 +-45.9875 +11 +154.175 +21 +-45.9875 +0 +LINE +8 +0 +10 +154.175 +20 +-45.9875 +11 +154.175 +21 +-58.7875 +0 +LINE +8 +0 +10 +154.175 +20 +-58.7875 +11 +169.675 +21 +-58.7875 +0 +LINE +8 +0 +10 +169.675 +20 +-58.7875 +11 +169.675 +21 +-45.9875 +0 +LINE +8 +0 +10 +150.625 +20 +-45.9875 +11 +135.125 +21 +-45.9875 +0 +LINE +8 +0 +10 +135.125 +20 +-45.9875 +11 +135.125 +21 +-58.7875 +0 +LINE +8 +0 +10 +135.125 +20 +-58.7875 +11 +150.625 +21 +-58.7875 +0 +LINE +8 +0 +10 +150.625 +20 +-58.7875 +11 +150.625 +21 +-45.9875 +0 +LINE +8 +0 +10 +160.15 +20 +-65.0375 +11 +144.65 +21 +-65.0375 +0 +LINE +8 +0 +10 +144.65 +20 +-65.0375 +11 +144.65 +21 +-77.8375 +0 +LINE +8 +0 +10 +144.65 +20 +-77.8375 +11 +160.15 +21 +-77.8375 +0 +LINE +8 +0 +10 +160.15 +20 +-77.8375 +11 +160.15 +21 +-65.0375 +0 +LINE +8 +0 +10 +141.1 +20 +-65.0375 +11 +125.6 +21 +-65.0375 +0 +LINE +8 +0 +10 +125.6 +20 +-65.0375 +11 +125.6 +21 +-77.8375 +0 +LINE +8 +0 +10 +125.6 +20 +-77.8375 +11 +141.1 +21 +-77.8375 +0 +LINE +8 +0 +10 +141.1 +20 +-77.8375 +11 +141.1 +21 +-65.0375 +0 +LINE +8 +0 +10 +155.3875 +20 +-7.8875 +11 +139.8875 +21 +-7.8875 +0 +LINE +8 +0 +10 +139.8875 +20 +-7.8875 +11 +139.8875 +21 +-20.6875 +0 +LINE +8 +0 +10 +139.8875 +20 +-20.6875 +11 +155.3875 +21 +-20.6875 +0 +LINE +8 +0 +10 +155.3875 +20 +-20.6875 +11 +155.3875 +21 +-7.8875 +0 +LINE +8 +0 +10 +136.3375 +20 +-7.8875 +11 +120.8375 +21 +-7.8875 +0 +LINE +8 +0 +10 +120.8375 +20 +-7.8875 +11 +120.8375 +21 +-20.6875 +0 +LINE +8 +0 +10 +120.8375 +20 +-20.6875 +11 +136.3375 +21 +-20.6875 +0 +LINE +8 +0 +10 +136.3375 +20 +-20.6875 +11 +136.3375 +21 +-7.8875 +0 +LINE +8 +0 +10 +164.9125 +20 +-26.9375 +11 +149.4125 +21 +-26.9375 +0 +LINE +8 +0 +10 +149.4125 +20 +-26.9375 +11 +149.4125 +21 +-39.7375 +0 +LINE +8 +0 +10 +149.4125 +20 +-39.7375 +11 +164.9125 +21 +-39.7375 +0 +LINE +8 +0 +10 +164.9125 +20 +-39.7375 +11 +164.9125 +21 +-26.9375 +0 +LINE +8 +0 +10 +145.8625 +20 +-26.9375 +11 +130.3625 +21 +-26.9375 +0 +LINE +8 +0 +10 +130.3625 +20 +-26.9375 +11 +130.3625 +21 +-39.7375 +0 +LINE +8 +0 +10 +130.3625 +20 +-39.7375 +11 +145.8625 +21 +-39.7375 +0 +LINE +8 +0 +10 +145.8625 +20 +-39.7375 +11 +145.8625 +21 +-26.9375 +0 +LINE +8 +0 +10 +131.575 +20 +-45.9875 +11 +116.075 +21 +-45.9875 +0 +LINE +8 +0 +10 +116.075 +20 +-45.9875 +11 +116.075 +21 +-58.7875 +0 +LINE +8 +0 +10 +116.075 +20 +-58.7875 +11 +131.575 +21 +-58.7875 +0 +LINE +8 +0 +10 +131.575 +20 +-58.7875 +11 +131.575 +21 +-45.9875 +0 +LINE +8 +0 +10 +122.05 +20 +-65.0375 +11 +106.55 +21 +-65.0375 +0 +LINE +8 +0 +10 +106.55 +20 +-65.0375 +11 +106.55 +21 +-77.8375 +0 +LINE +8 +0 +10 +106.55 +20 +-77.8375 +11 +122.05 +21 +-77.8375 +0 +LINE +8 +0 +10 +122.05 +20 +-77.8375 +11 +122.05 +21 +-65.0375 +0 +LINE +8 +0 +10 +103.0 +20 +-65.0375 +11 +87.5 +21 +-65.0375 +0 +LINE +8 +0 +10 +87.5 +20 +-65.0375 +11 +87.5 +21 +-77.8375 +0 +LINE +8 +0 +10 +87.5 +20 +-77.8375 +11 +103.0 +21 +-77.8375 +0 +LINE +8 +0 +10 +103.0 +20 +-77.8375 +11 +103.0 +21 +-65.0375 +0 +LINE +8 +0 +10 +117.2875 +20 +-7.8875 +11 +101.7875 +21 +-7.8875 +0 +LINE +8 +0 +10 +101.7875 +20 +-7.8875 +11 +101.7875 +21 +-20.6875 +0 +LINE +8 +0 +10 +101.7875 +20 +-20.6875 +11 +117.2875 +21 +-20.6875 +0 +LINE +8 +0 +10 +117.2875 +20 +-20.6875 +11 +117.2875 +21 +-7.8875 +0 +LINE +8 +0 +10 +98.2375 +20 +-7.8875 +11 +82.7375 +21 +-7.8875 +0 +LINE +8 +0 +10 +82.7375 +20 +-7.8875 +11 +82.7375 +21 +-20.6875 +0 +LINE +8 +0 +10 +82.7375 +20 +-20.6875 +11 +98.2375 +21 +-20.6875 +0 +LINE +8 +0 +10 +98.2375 +20 +-20.6875 +11 +98.2375 +21 +-7.8875 +0 +LINE +8 +0 +10 +126.8125 +20 +-26.9375 +11 +111.3125 +21 +-26.9375 +0 +LINE +8 +0 +10 +111.3125 +20 +-26.9375 +11 +111.3125 +21 +-39.7375 +0 +LINE +8 +0 +10 +111.3125 +20 +-39.7375 +11 +126.8125 +21 +-39.7375 +0 +LINE +8 +0 +10 +126.8125 +20 +-39.7375 +11 +126.8125 +21 +-26.9375 +0 +LINE +8 +0 +10 +107.7625 +20 +-26.9375 +11 +92.2625 +21 +-26.9375 +0 +LINE +8 +0 +10 +92.2625 +20 +-26.9375 +11 +92.2625 +21 +-39.7375 +0 +LINE +8 +0 +10 +92.2625 +20 +-39.7375 +11 +107.7625 +21 +-39.7375 +0 +LINE +8 +0 +10 +107.7625 +20 +-39.7375 +11 +107.7625 +21 +-26.9375 +0 +LINE +8 +0 +10 +112.525 +20 +-45.9875 +11 +97.025 +21 +-45.9875 +0 +LINE +8 +0 +10 +97.025 +20 +-45.9875 +11 +97.025 +21 +-58.7875 +0 +LINE +8 +0 +10 +97.025 +20 +-58.7875 +11 +112.525 +21 +-58.7875 +0 +LINE +8 +0 +10 +112.525 +20 +-58.7875 +11 +112.525 +21 +-45.9875 +0 +LINE +8 +0 +10 +93.475 +20 +-45.9875 +11 +77.975 +21 +-45.9875 +0 +LINE +8 +0 +10 +77.975 +20 +-45.9875 +11 +77.975 +21 +-58.7875 +0 +LINE +8 +0 +10 +77.975 +20 +-58.7875 +11 +93.475 +21 +-58.7875 +0 +LINE +8 +0 +10 +93.475 +20 +-58.7875 +11 +93.475 +21 +-45.9875 +0 +LINE +8 +0 +10 +83.95 +20 +-65.0375 +11 +68.45 +21 +-65.0375 +0 +LINE +8 +0 +10 +68.45 +20 +-65.0375 +11 +68.45 +21 +-77.8375 +0 +LINE +8 +0 +10 +68.45 +20 +-77.8375 +11 +83.95 +21 +-77.8375 +0 +LINE +8 +0 +10 +83.95 +20 +-77.8375 +11 +83.95 +21 +-65.0375 +0 +LINE +8 +0 +10 +79.1875 +20 +-84.0875 +11 +63.6875 +21 +-84.0875 +0 +LINE +8 +0 +10 +63.6875 +20 +-84.0875 +11 +63.6875 +21 +-96.8875 +0 +LINE +8 +0 +10 +63.6875 +20 +-96.8875 +11 +79.1875 +21 +-96.8875 +0 +LINE +8 +0 +10 +79.1875 +20 +-96.8875 +11 +79.1875 +21 +-84.0875 +0 +LINE +8 +0 +10 +79.1875 +20 +-7.8875 +11 +63.6875 +21 +-7.8875 +0 +LINE +8 +0 +10 +63.6875 +20 +-7.8875 +11 +63.6875 +21 +-20.6875 +0 +LINE +8 +0 +10 +63.6875 +20 +-20.6875 +11 +79.1875 +21 +-20.6875 +0 +LINE +8 +0 +10 +79.1875 +20 +-20.6875 +11 +79.1875 +21 +-7.8875 +0 +LINE +8 +0 +10 +60.1375 +20 +-7.8875 +11 +44.6375 +21 +-7.8875 +0 +LINE +8 +0 +10 +44.6375 +20 +-7.8875 +11 +44.6375 +21 +-20.6875 +0 +LINE +8 +0 +10 +44.6375 +20 +-20.6875 +11 +60.1375 +21 +-20.6875 +0 +LINE +8 +0 +10 +60.1375 +20 +-20.6875 +11 +60.1375 +21 +-7.8875 +0 +LINE +8 +0 +10 +88.7125 +20 +-26.9375 +11 +73.2125 +21 +-26.9375 +0 +LINE +8 +0 +10 +73.2125 +20 +-26.9375 +11 +73.2125 +21 +-39.7375 +0 +LINE +8 +0 +10 +73.2125 +20 +-39.7375 +11 +88.7125 +21 +-39.7375 +0 +LINE +8 +0 +10 +88.7125 +20 +-39.7375 +11 +88.7125 +21 +-26.9375 +0 +LINE +8 +0 +10 +69.6625 +20 +-26.9375 +11 +54.1625 +21 +-26.9375 +0 +LINE +8 +0 +10 +54.1625 +20 +-26.9375 +11 +54.1625 +21 +-39.7375 +0 +LINE +8 +0 +10 +54.1625 +20 +-39.7375 +11 +69.6625 +21 +-39.7375 +0 +LINE +8 +0 +10 +69.6625 +20 +-39.7375 +11 +69.6625 +21 +-26.9375 +0 +LINE +8 +0 +10 +74.425 +20 +-45.9875 +11 +58.925 +21 +-45.9875 +0 +LINE +8 +0 +10 +58.925 +20 +-45.9875 +11 +58.925 +21 +-58.7875 +0 +LINE +8 +0 +10 +58.925 +20 +-58.7875 +11 +74.425 +21 +-58.7875 +0 +LINE +8 +0 +10 +74.425 +20 +-58.7875 +11 +74.425 +21 +-45.9875 +0 +LINE +8 +0 +10 +64.9 +20 +-65.0375 +11 +49.4 +21 +-65.0375 +0 +LINE +8 +0 +10 +49.4 +20 +-65.0375 +11 +49.4 +21 +-77.8375 +0 +LINE +8 +0 +10 +49.4 +20 +-77.8375 +11 +64.9 +21 +-77.8375 +0 +LINE +8 +0 +10 +64.9 +20 +-77.8375 +11 +64.9 +21 +-65.0375 +0 +LINE +8 +0 +10 +52.9937 +20 +-84.0875 +11 +37.4937 +21 +-84.0875 +0 +LINE +8 +0 +10 +37.4937 +20 +-84.0875 +11 +37.4937 +21 +-96.8875 +0 +LINE +8 +0 +10 +37.4937 +20 +-96.8875 +11 +52.9937 +21 +-96.8875 +0 +LINE +8 +0 +10 +52.9937 +20 +-96.8875 +11 +52.9937 +21 +-84.0875 +0 +LINE +8 +0 +10 +41.0875 +20 +-7.8875 +11 +25.5875 +21 +-7.8875 +0 +LINE +8 +0 +10 +25.5875 +20 +-7.8875 +11 +25.5875 +21 +-20.6875 +0 +LINE +8 +0 +10 +25.5875 +20 +-20.6875 +11 +41.0875 +21 +-20.6875 +0 +LINE +8 +0 +10 +41.0875 +20 +-20.6875 +11 +41.0875 +21 +-7.8875 +0 +LINE +8 +0 +10 +22.0375 +20 +-7.8875 +11 +6.5375 +21 +-7.8875 +0 +LINE +8 +0 +10 +6.5375 +20 +-7.8875 +11 +6.5375 +21 +-20.6875 +0 +LINE +8 +0 +10 +6.5375 +20 +-20.6875 +11 +22.0375 +21 +-20.6875 +0 +LINE +8 +0 +10 +22.0375 +20 +-20.6875 +11 +22.0375 +21 +-7.8875 +0 +LINE +8 +0 +10 +50.6125 +20 +-26.9375 +11 +35.1125 +21 +-26.9375 +0 +LINE +8 +0 +10 +35.1125 +20 +-26.9375 +11 +35.1125 +21 +-39.7375 +0 +LINE +8 +0 +10 +35.1125 +20 +-39.7375 +11 +50.6125 +21 +-39.7375 +0 +LINE +8 +0 +10 +50.6125 +20 +-39.7375 +11 +50.6125 +21 +-26.9375 +0 +LINE +8 +0 +10 +26.8 +20 +-26.9375 +11 +11.3 +21 +-26.9375 +0 +LINE +8 +0 +10 +11.3 +20 +-26.9375 +11 +11.3 +21 +-39.7375 +0 +LINE +8 +0 +10 +11.3 +20 +-39.7375 +11 +26.8 +21 +-39.7375 +0 +LINE +8 +0 +10 +26.8 +20 +-39.7375 +11 +26.8 +21 +-26.9375 +0 +LINE +8 +0 +10 +55.375 +20 +-45.9875 +11 +39.875 +21 +-45.9875 +0 +LINE +8 +0 +10 +39.875 +20 +-45.9875 +11 +39.875 +21 +-58.7875 +0 +LINE +8 +0 +10 +39.875 +20 +-58.7875 +11 +55.375 +21 +-58.7875 +0 +LINE +8 +0 +10 +55.375 +20 +-58.7875 +11 +55.375 +21 +-45.9875 +0 +LINE +8 +0 +10 +29.18125 +20 +-45.9875 +11 +13.68125 +21 +-45.9875 +0 +LINE +8 +0 +10 +13.68125 +20 +-45.9875 +11 +13.68125 +21 +-58.7875 +0 +LINE +8 +0 +10 +13.68125 +20 +-58.7875 +11 +29.18125 +21 +-58.7875 +0 +LINE +8 +0 +10 +29.18125 +20 +-58.7875 +11 +29.18125 +21 +-45.9875 +0 +LINE +8 +0 +10 +26.8 +20 +-84.0875 +11 +11.3 +21 +-84.0875 +0 +LINE +8 +0 +10 +11.3 +20 +-84.0875 +11 +11.3 +21 +-96.8875 +0 +LINE +8 +0 +10 +11.3 +20 +-96.8875 +11 +26.8 +21 +-96.8875 +0 +LINE +8 +0 +10 +26.8 +20 +-96.8875 +11 +26.8 +21 +-84.0875 +0 +LINE +8 +0 +10 +260.1625 +20 +-26.9375 +11 +244.6625 +21 +-26.9375 +0 +LINE +8 +0 +10 +244.6625 +20 +-26.9375 +11 +244.6625 +21 +-39.7375 +0 +LINE +8 +0 +10 +244.6625 +20 +-39.7375 +11 +260.1625 +21 +-39.7375 +0 +LINE +8 +0 +10 +260.1625 +20 +-39.7375 +11 +260.1625 +21 +-26.9375 +0 +LINE +8 +0 +10 +283.975 +20 +-26.9375 +11 +268.475 +21 +-26.9375 +0 +LINE +8 +0 +10 +268.475 +20 +-26.9375 +11 +268.475 +21 +-39.7375 +0 +LINE +8 +0 +10 +268.475 +20 +-39.7375 +11 +283.975 +21 +-39.7375 +0 +LINE +8 +0 +10 +283.975 +20 +-39.7375 +11 +283.975 +21 +-26.9375 +0 +LINE +8 +0 +10 +283.975 +20 +-84.0875 +11 +268.475 +21 +-84.0875 +0 +LINE +8 +0 +10 +268.475 +20 +-84.0875 +11 +268.475 +21 +-96.8875 +0 +LINE +8 +0 +10 +268.475 +20 +-96.8875 +11 +283.975 +21 +-96.8875 +0 +LINE +8 +0 +10 +283.975 +20 +-96.8875 +11 +283.975 +21 +-84.0875 +0 +LINE +8 +0 +10 +250.6375 +20 +-7.8875 +11 +235.1375 +21 +-7.8875 +0 +LINE +8 +0 +10 +235.1375 +20 +-7.8875 +11 +235.1375 +21 +-20.6875 +0 +LINE +8 +0 +10 +235.1375 +20 +-20.6875 +11 +250.6375 +21 +-20.6875 +0 +LINE +8 +0 +10 +250.6375 +20 +-20.6875 +11 +250.6375 +21 +-7.8875 +0 +LINE +8 +0 +10 +241.1125 +20 +-26.9375 +11 +225.6125 +21 +-26.9375 +0 +LINE +8 +0 +10 +225.6125 +20 +-26.9375 +11 +225.6125 +21 +-39.7375 +0 +LINE +8 +0 +10 +225.6125 +20 +-39.7375 +11 +241.1125 +21 +-39.7375 +0 +LINE +8 +0 +10 +241.1125 +20 +-39.7375 +11 +241.1125 +21 +-26.9375 +0 +LINE +8 +0 +10 +222.0625 +20 +-26.9375 +11 +206.5625 +21 +-26.9375 +0 +LINE +8 +0 +10 +206.5625 +20 +-26.9375 +11 +206.5625 +21 +-39.7375 +0 +LINE +8 +0 +10 +206.5625 +20 +-39.7375 +11 +222.0625 +21 +-39.7375 +0 +LINE +8 +0 +10 +222.0625 +20 +-39.7375 +11 +222.0625 +21 +-26.9375 +0 +LINE +8 +0 +10 +245.875 +20 +-45.9875 +11 +230.375 +21 +-45.9875 +0 +LINE +8 +0 +10 +230.375 +20 +-45.9875 +11 +230.375 +21 +-58.7875 +0 +LINE +8 +0 +10 +230.375 +20 +-58.7875 +11 +245.875 +21 +-58.7875 +0 +LINE +8 +0 +10 +245.875 +20 +-58.7875 +11 +245.875 +21 +-45.9875 +0 +LINE +8 +0 +10 +226.825 +20 +-45.9875 +11 +211.325 +21 +-45.9875 +0 +LINE +8 +0 +10 +211.325 +20 +-45.9875 +11 +211.325 +21 +-58.7875 +0 +LINE +8 +0 +10 +211.325 +20 +-58.7875 +11 +226.825 +21 +-58.7875 +0 +LINE +8 +0 +10 +226.825 +20 +-58.7875 +11 +226.825 +21 +-45.9875 +0 +LINE +8 +0 +10 +236.35 +20 +-65.0375 +11 +220.85 +21 +-65.0375 +0 +LINE +8 +0 +10 +220.85 +20 +-65.0375 +11 +220.85 +21 +-77.8375 +0 +LINE +8 +0 +10 +220.85 +20 +-77.8375 +11 +236.35 +21 +-77.8375 +0 +LINE +8 +0 +10 +236.35 +20 +-77.8375 +11 +236.35 +21 +-65.0375 +0 +LINE +8 +0 +10 +217.3 +20 +-65.0375 +11 +201.8 +21 +-65.0375 +0 +LINE +8 +0 +10 +201.8 +20 +-65.0375 +11 +201.8 +21 +-77.8375 +0 +LINE +8 +0 +10 +201.8 +20 +-77.8375 +11 +217.3 +21 +-77.8375 +0 +LINE +8 +0 +10 +217.3 +20 +-77.8375 +11 +217.3 +21 +-65.0375 +0 +LINE +8 +0 +10 +257.78125 +20 +-84.0875 +11 +242.28125 +21 +-84.0875 +0 +LINE +8 +0 +10 +242.28125 +20 +-84.0875 +11 +242.28125 +21 +-96.8875 +0 +LINE +8 +0 +10 +242.28125 +20 +-96.8875 +11 +257.78125 +21 +-96.8875 +0 +LINE +8 +0 +10 +257.78125 +20 +-96.8875 +11 +257.78125 +21 +-84.0875 +0 +LINE +8 +0 +10 +231.5875 +20 +-7.8875 +11 +216.0875 +21 +-7.8875 +0 +LINE +8 +0 +10 +216.0875 +20 +-7.8875 +11 +216.0875 +21 +-20.6875 +0 +LINE +8 +0 +10 +216.0875 +20 +-20.6875 +11 +231.5875 +21 +-20.6875 +0 +LINE +8 +0 +10 +231.5875 +20 +-20.6875 +11 +231.5875 +21 +-7.8875 +0 +LINE +8 +0 +10 +212.5375 +20 +-7.8875 +11 +197.0375 +21 +-7.8875 +0 +LINE +8 +0 +10 +197.0375 +20 +-7.8875 +11 +197.0375 +21 +-20.6875 +0 +LINE +8 +0 +10 +197.0375 +20 +-20.6875 +11 +212.5375 +21 +-20.6875 +0 +LINE +8 +0 +10 +212.5375 +20 +-20.6875 +11 +212.5375 +21 +-7.8875 +0 +LINE +8 +0 +10 +203.0125 +20 +-26.9375 +11 +187.5125 +21 +-26.9375 +0 +LINE +8 +0 +10 +187.5125 +20 +-26.9375 +11 +187.5125 +21 +-39.7375 +0 +LINE +8 +0 +10 +187.5125 +20 +-39.7375 +11 +203.0125 +21 +-39.7375 +0 +LINE +8 +0 +10 +203.0125 +20 +-39.7375 +11 +203.0125 +21 +-26.9375 +0 +LINE +8 +0 +10 +207.775 +20 +-45.9875 +11 +192.275 +21 +-45.9875 +0 +LINE +8 +0 +10 +192.275 +20 +-45.9875 +11 +192.275 +21 +-58.7875 +0 +LINE +8 +0 +10 +192.275 +20 +-58.7875 +11 +207.775 +21 +-58.7875 +0 +LINE +8 +0 +10 +207.775 +20 +-58.7875 +11 +207.775 +21 +-45.9875 +0 +LINE +8 +0 +10 +188.725 +20 +-45.9875 +11 +173.225 +21 +-45.9875 +0 +LINE +8 +0 +10 +173.225 +20 +-45.9875 +11 +173.225 +21 +-58.7875 +0 +LINE +8 +0 +10 +173.225 +20 +-58.7875 +11 +188.725 +21 +-58.7875 +0 +LINE +8 +0 +10 +188.725 +20 +-58.7875 +11 +188.725 +21 +-45.9875 +0 +LINE +8 +0 +10 +198.25 +20 +-65.0375 +11 +182.75 +21 +-65.0375 +0 +LINE +8 +0 +10 +182.75 +20 +-65.0375 +11 +182.75 +21 +-77.8375 +0 +LINE +8 +0 +10 +182.75 +20 +-77.8375 +11 +198.25 +21 +-77.8375 +0 +LINE +8 +0 +10 +198.25 +20 +-77.8375 +11 +198.25 +21 +-65.0375 +0 +LINE +8 +0 +10 +179.2 +20 +-65.0375 +11 +163.7 +21 +-65.0375 +0 +LINE +8 +0 +10 +163.7 +20 +-65.0375 +11 +163.7 +21 +-77.8375 +0 +LINE +8 +0 +10 +163.7 +20 +-77.8375 +11 +179.2 +21 +-77.8375 +0 +LINE +8 +0 +10 +179.2 +20 +-77.8375 +11 +179.2 +21 +-65.0375 +0 +LINE +8 +0 +10 +231.5875 +20 +-84.0875 +11 +216.0875 +21 +-84.0875 +0 +LINE +8 +0 +10 +216.0875 +20 +-84.0875 +11 +216.0875 +21 +-96.8875 +0 +LINE +8 +0 +10 +216.0875 +20 +-96.8875 +11 +231.5875 +21 +-96.8875 +0 +LINE +8 +0 +10 +231.5875 +20 +-96.8875 +11 +231.5875 +21 +-84.0875 +0 +LINE +8 +0 +10 +244.01875 +20 +-75.3375 +11 +244.01875 +21 +-80.4375 +0 +LINE +8 +0 +10 +244.01875 +20 +-80.4375 +11 +241.41875 +21 +-80.4375 +0 +LINE +8 +0 +10 +241.41875 +20 +-80.4375 +11 +241.41875 +21 +-75.3375 +0 +LINE +8 +0 +10 +241.41875 +20 +-75.3375 +11 +244.01875 +21 +-75.3375 +0 +LINE +8 +0 +10 +284.61875 +20 +-75.3375 +11 +284.61875 +21 +-80.4375 +0 +LINE +8 +0 +10 +284.61875 +20 +-80.4375 +11 +287.21875 +21 +-80.4375 +0 +LINE +8 +0 +10 +287.21875 +20 +-80.4375 +11 +287.21875 +21 +-75.3375 +0 +LINE +8 +0 +10 +287.21875 +20 +-75.3375 +11 +284.61875 +21 +-75.3375 +0 +LINE +8 +0 +10 +272.06875 +20 +-65.0375 +11 +256.56875 +21 +-65.0375 +0 +LINE +8 +0 +10 +256.56875 +20 +-65.0375 +11 +256.56875 +21 +-77.8375 +0 +LINE +8 +0 +10 +256.56875 +20 +-77.8375 +11 +272.06875 +21 +-77.8375 +0 +LINE +8 +0 +10 +272.06875 +20 +-77.8375 +11 +272.06875 +21 +-65.0375 +0 +TEXT +8 +Cmts +62 +1 +10 +303.847897 +20 +-52.73062 +1 +95.000 mm +40 +1.5 +41 +1.5 +50 +270.186984 +7 +SIMPLEX +72 +1 +73 +2 +11 +303.847897 +21 +-52.73062 +0 +LINE +8 +Cmts +62 +1 +10 +287.34 +20 +-100.28 +11 +305.35289 +21 +-100.221215 +0 +LINE +8 +Cmts +62 +1 +10 +287.03 +20 +-5.29 +11 +305.04289 +21 +-5.231215 +0 +LINE +8 +Cmts +62 +1 +10 +302.342904 +20 +-5.240026 +11 +302.652904 +21 +-100.230026 +0 +LINE +8 +Cmts +62 +1 +10 +302.652904 +20 +-100.230026 +11 +302.06281 +21 +-99.105442 +0 +LINE +8 +Cmts +62 +1 +10 +302.652904 +20 +-100.230026 +11 +303.235645 +21 +-99.101614 +0 +LINE +8 +Cmts +62 +1 +10 +302.342904 +20 +-5.240026 +11 +301.760163 +21 +-6.368438 +0 +LINE +8 +Cmts +62 +1 +10 +302.342904 +20 +-5.240026 +11 +302.932998 +21 +-6.36461 +0 +TEXT +8 +Cmts +62 +1 +10 +17.92 +20 +-43.7 +1 +25.6125 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +17.92 +21 +-43.7 +0 +LINE +8 +Cmts +62 +1 +10 +30.71 +20 +-33.34 +11 +30.71 +21 +-45.05 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-33.34 +11 +5.13 +21 +-45.05 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-42.35 +11 +30.71 +21 +-42.35 +0 +LINE +8 +Cmts +62 +1 +10 +30.71 +20 +-42.35 +11 +29.583496 +21 +-42.936421 +0 +LINE +8 +Cmts +62 +1 +10 +30.71 +20 +-42.35 +11 +29.583496 +21 +-41.763579 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-42.35 +11 +6.256504 +21 +-42.936421 +0 +LINE +8 +Cmts +62 +1 +10 +5.13 +20 +-42.35 +11 +6.256504 +21 +-41.763579 +0 +TEXT +8 +Cmts +62 +1 +10 +277.347461 +20 +-39.634741 +1 +25.6125 mm +40 +1.5 +41 +1.5 +50 +0.022425 +7 +SIMPLEX +72 +1 +73 +2 +11 +277.347461 +21 +-39.634741 +0 +LINE +8 +Cmts +62 +1 +10 +290.12 +20 +-33.34 +11 +290.12299 +21 +-40.979741 +0 +LINE +8 +Cmts +62 +1 +10 +264.57 +20 +-33.35 +11 +264.57299 +21 +-40.989741 +0 +LINE +8 +Cmts +62 +1 +10 +264.571933 +20 +-38.289741 +11 +290.121933 +21 +-38.279741 +0 +LINE +8 +Cmts +62 +1 +10 +290.121933 +20 +-38.279741 +11 +288.995659 +21 +-38.866603 +0 +LINE +8 +Cmts +62 +1 +10 +290.121933 +20 +-38.279741 +11 +288.9952 +21 +-37.693761 +0 +LINE +8 +Cmts +62 +1 +10 +264.571933 +20 +-38.289741 +11 +265.698666 +21 +-38.875721 +0 +LINE +8 +Cmts +62 +1 +10 +264.571933 +20 +-38.289741 +11 +265.698207 +21 +-37.702879 +0 +TEXT +8 +Cmts +62 +1 +10 +202.7 +20 +-90.49 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +202.7 +21 +-90.49 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-93.64 +11 +204.05 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-87.34 +11 +204.05 +21 +-87.34 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-87.34 +11 +201.35 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-93.64 +11 +200.763579 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-93.64 +11 +201.936421 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-87.34 +11 +200.763579 +21 +-88.466504 +0 +LINE +8 +Cmts +62 +1 +10 +201.35 +20 +-87.34 +11 +201.936421 +21 +-88.466504 +0 +TEXT +8 +Cmts +62 +1 +10 +258.43468 +20 +-33.349763 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.090946 +7 +SIMPLEX +72 +1 +73 +2 +11 +258.43468 +21 +-33.349763 +0 +LINE +8 +Cmts +62 +1 +10 +264.59 +20 +-36.49 +11 +257.089682 +21 +-36.501906 +0 +LINE +8 +Cmts +62 +1 +10 +264.58 +20 +-30.19 +11 +257.079682 +21 +-30.201906 +0 +LINE +8 +Cmts +62 +1 +10 +259.779679 +20 +-30.19762 +11 +259.789679 +21 +-36.49762 +0 +LINE +8 +Cmts +62 +1 +10 +259.789679 +20 +-36.49762 +11 +259.201471 +21 +-35.372048 +0 +LINE +8 +Cmts +62 +1 +10 +259.789679 +20 +-36.49762 +11 +260.374311 +21 +-35.370187 +0 +LINE +8 +Cmts +62 +1 +10 +259.779679 +20 +-30.19762 +11 +259.195047 +21 +-31.325053 +0 +LINE +8 +Cmts +62 +1 +10 +259.779679 +20 +-30.19762 +11 +260.367887 +21 +-31.323192 +0 +TEXT +8 +Cmts +62 +1 +10 +24.47 +20 +-33.33 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +24.47 +21 +-33.33 +0 +LINE +8 +Cmts +62 +1 +10 +30.72 +20 +-36.48 +11 +23.12 +21 +-36.48 +0 +LINE +8 +Cmts +62 +1 +10 +30.72 +20 +-30.18 +11 +23.12 +21 +-30.18 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-30.18 +11 +25.82 +21 +-36.48 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-36.48 +11 +25.233579 +21 +-35.353496 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-36.48 +11 +26.406421 +21 +-35.353496 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-30.18 +11 +25.233579 +21 +-31.306504 +0 +LINE +8 +Cmts +62 +1 +10 +25.82 +20 +-30.18 +11 +26.406421 +21 +-31.306504 +0 +TEXT +8 +Cmts +62 +1 +10 +103.46 +20 +-90.49 +1 +6.300 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +103.46 +21 +-90.49 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-93.64 +11 +102.11 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-87.34 +11 +102.11 +21 +-87.34 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-87.34 +11 +104.81 +21 +-93.64 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-93.64 +11 +104.223579 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-93.64 +11 +105.396421 +21 +-92.513496 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-87.34 +11 +104.223579 +21 +-88.466504 +0 +LINE +8 +Cmts +62 +1 +10 +104.81 +20 +-87.34 +11 +105.396421 +21 +-88.466504 +0 +TEXT +8 +Cmts +62 +1 +10 +171.54 +20 +-78.67 +1 +47.800 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +171.54 +21 +-78.67 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-90.49 +11 +147.64 +21 +-77.32 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-90.49 +11 +195.44 +21 +-77.32 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-80.02 +11 +147.64 +21 +-80.02 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-80.02 +11 +148.766504 +21 +-79.433579 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-80.02 +11 +148.766504 +21 +-80.606421 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-80.02 +11 +194.313496 +21 +-79.433579 +0 +LINE +8 +Cmts +62 +1 +10 +195.44 +20 +-80.02 +11 +194.313496 +21 +-80.606421 +0 +TEXT +8 +Cmts +62 +1 +10 +128.64 +20 +-109.43 +1 +38.000 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +128.64 +21 +-109.43 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-90.48 +11 +109.64 +21 +-110.78 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-90.48 +11 +147.64 +21 +-110.78 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-108.08 +11 +109.64 +21 +-108.08 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-108.08 +11 +110.766504 +21 +-107.493579 +0 +LINE +8 +Cmts +62 +1 +10 +109.64 +20 +-108.08 +11 +110.766504 +21 +-108.666421 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-108.08 +11 +146.513496 +21 +-107.493579 +0 +LINE +8 +Cmts +62 +1 +10 +147.64 +20 +-108.08 +11 +146.513496 +21 +-108.666421 +0 +TEXT +8 +Cmts +62 +1 +10 +197.96 +20 +-99.88 +1 +0.800 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +197.96 +21 +-99.88 +0 +LINE +8 +Cmts +62 +1 +10 +194.38 +20 +-100.28 +11 +199.31 +21 +-100.28 +0 +LINE +8 +Cmts +62 +1 +10 +194.38 +20 +-99.48 +11 +199.31 +21 +-99.48 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-99.48 +11 +196.61 +21 +-100.28 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-100.28 +11 +196.023579 +21 +-99.153496 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-100.28 +11 +197.196421 +21 +-99.153496 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-99.48 +11 +196.023579 +21 +-100.606504 +0 +LINE +8 +Cmts +62 +1 +10 +196.61 +20 +-99.48 +11 +197.196421 +21 +-100.606504 +0 +TEXT +8 +Cmts +62 +1 +10 +188.875133 +20 +-92.417616 +1 +3.900 mm +40 +1.5 +41 +1.5 +50 +89.559272 +7 +SIMPLEX +72 +1 +73 +2 +11 +188.875133 +21 +-92.417616 +0 +LINE +8 +Cmts +62 +1 +10 +191.77 +20 +-94.39 +11 +187.510173 +21 +-94.357232 +0 +LINE +8 +Cmts +62 +1 +10 +191.8 +20 +-90.49 +11 +187.540173 +21 +-90.457232 +0 +LINE +8 +Cmts +62 +1 +10 +190.240093 +20 +-90.478001 +11 +190.210093 +21 +-94.378001 +0 +LINE +8 +Cmts +62 +1 +10 +190.210093 +20 +-94.378001 +11 +189.632355 +21 +-93.24702 +0 +LINE +8 +Cmts +62 +1 +10 +190.210093 +20 +-94.378001 +11 +190.805162 +21 +-93.256041 +0 +LINE +8 +Cmts +62 +1 +10 +190.240093 +20 +-90.478001 +11 +189.645024 +21 +-91.599961 +0 +LINE +8 +Cmts +62 +1 +10 +190.240093 +20 +-90.478001 +11 +190.817831 +21 +-91.608982 +0 +TEXT +8 +Cmts +62 +1 +10 +159.664849 +20 +-87.283312 +1 +6.400 mm +40 +1.5 +41 +1.5 +50 +270.089525 +7 +SIMPLEX +72 +1 +73 +2 +11 +159.664849 +21 +-87.283312 +0 +LINE +8 +Cmts +62 +1 +10 +155.38 +20 +-84.09 +11 +161.009848 +21 +-84.081203 +0 +LINE +8 +Cmts +62 +1 +10 +155.39 +20 +-90.49 +11 +161.019848 +21 +-90.481203 +0 +LINE +8 +Cmts +62 +1 +10 +158.319851 +20 +-90.485422 +11 +158.309851 +21 +-84.085422 +0 +LINE +8 +Cmts +62 +1 +10 +158.309851 +20 +-84.085422 +11 +158.898031 +21 +-85.211008 +0 +LINE +8 +Cmts +62 +1 +10 +158.309851 +20 +-84.085422 +11 +157.725191 +21 +-85.212841 +0 +LINE +8 +Cmts +62 +1 +10 +158.319851 +20 +-90.485422 +11 +158.904511 +21 +-89.358003 +0 +LINE +8 +Cmts +62 +1 +10 +158.319851 +20 +-90.485422 +11 +157.731671 +21 +-89.359836 +0 +LINE +8 +Cmts +62 +1 +10 +109.67 +20 +-90.4875 +11 +195.48 +21 +-90.4875 +0 +TEXT +8 +Cmts +62 +1 +10 +147.64 +20 +-117.98 +1 +88.300 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +147.64 +21 +-117.98 +0 +LINE +8 +Cmts +62 +1 +10 +191.79 +20 +-99.49 +11 +191.79 +21 +-119.33 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-99.49 +11 +103.49 +21 +-119.33 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-116.63 +11 +191.79 +21 +-116.63 +0 +LINE +8 +Cmts +62 +1 +10 +191.79 +20 +-116.63 +11 +190.663496 +21 +-117.216421 +0 +LINE +8 +Cmts +62 +1 +10 +191.79 +20 +-116.63 +11 +190.663496 +21 +-116.043579 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-116.63 +11 +104.616504 +21 +-117.216421 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-116.63 +11 +104.616504 +21 +-116.043579 +0 +TEXT +8 +Cmts +62 +1 +10 +102.19 +20 +-104.41 +1 +2.600 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +102.19 +21 +-104.41 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-99.49 +11 +103.49 +21 +-105.76 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-99.49 +11 +100.89 +21 +-105.76 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-103.06 +11 +103.49 +21 +-103.06 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-103.06 +11 +102.363496 +21 +-103.646421 +0 +LINE +8 +Cmts +62 +1 +10 +103.49 +20 +-103.06 +11 +102.363496 +21 +-102.473579 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-103.06 +11 +102.016504 +21 +-103.646421 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-103.06 +11 +102.016504 +21 +-102.473579 +0 +TEXT +8 +Cmts +62 +1 +10 +97.67 +20 +-96.94 +1 +5.100 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +97.67 +21 +-96.94 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-99.49 +11 +96.32 +21 +-99.49 +0 +LINE +8 +Cmts +62 +1 +10 +100.89 +20 +-94.39 +11 +96.32 +21 +-94.39 +0 +LINE +8 +Cmts +62 +1 +10 +99.02 +20 +-94.39 +11 +99.02 +21 +-99.49 +0 +LINE +8 +Cmts +62 +1 +10 +99.02 +20 +-99.49 +11 +98.433579 +21 +-98.363496 +0 +LINE +8 +Cmts +62 +1 +10 +99.02 +20 +-99.49 +11 +99.606421 +21 +-98.363496 +0 +LINE +8 +Cmts +62 +1 +10 +99.02 +20 +-94.39 +11 +98.433579 +21 +-95.516504 +0 +LINE +8 +Cmts +62 +1 +10 +99.02 +20 +-94.39 +11 +99.606421 +21 +-95.516504 +0 +TEXT +8 +Cmts +62 +1 +10 +109.63 +20 +-81.13 +1 +14.500 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +109.63 +21 +-81.13 +0 +LINE +8 +Cmts +62 +1 +10 +102.38 +20 +-89.28 +11 +102.38 +21 +-79.78 +0 +LINE +8 +Cmts +62 +1 +10 +116.88 +20 +-89.28 +11 +116.88 +21 +-79.78 +0 +LINE +8 +Cmts +62 +1 +10 +116.88 +20 +-82.48 +11 +102.38 +21 +-82.48 +0 +LINE +8 +Cmts +62 +1 +10 +102.38 +20 +-82.48 +11 +103.506504 +21 +-81.893579 +0 +LINE +8 +Cmts +62 +1 +10 +102.38 +20 +-82.48 +11 +103.506504 +21 +-83.066421 +0 +LINE +8 +Cmts +62 +1 +10 +116.88 +20 +-82.48 +11 +115.753496 +21 +-81.893579 +0 +LINE +8 +Cmts +62 +1 +10 +116.88 +20 +-82.48 +11 +115.753496 +21 +-83.066421 +0 +TEXT +8 +Cmts +62 +1 +10 +121.803009 +20 +-90.50045 +1 +2.400 mm +40 +1.5 +41 +1.5 +50 +89.761269 +7 +SIMPLEX +72 +1 +73 +2 +11 +121.803009 +21 +-90.50045 +0 +LINE +8 +Cmts +62 +1 +10 +116.89 +20 +-91.68 +11 +123.147997 +21 +-91.706075 +0 +LINE +8 +Cmts +62 +1 +10 +116.9 +20 +-89.28 +11 +123.157997 +21 +-89.306075 +0 +LINE +8 +Cmts +62 +1 +10 +120.458021 +20 +-89.294825 +11 +120.448021 +21 +-91.694825 +0 +LINE +8 +Cmts +62 +1 +10 +120.448021 +20 +-91.694825 +11 +119.866299 +21 +-90.565888 +0 +LINE +8 +Cmts +62 +1 +10 +120.448021 +20 +-91.694825 +11 +121.03913 +21 +-90.570774 +0 +LINE +8 +Cmts +62 +1 +10 +120.458021 +20 +-89.294825 +11 +119.866912 +21 +-90.418876 +0 +LINE +8 +Cmts +62 +1 +10 +120.458021 +20 +-89.294825 +11 +121.039743 +21 +-90.423762 +0 +TEXT +8 +Cmts +62 +1 +10 +115.69 +20 +-85.3 +1 +2.400 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +115.69 +21 +-85.3 +0 +LINE +8 +Cmts +62 +1 +10 +116.89 +20 +-89.28 +11 +116.89 +21 +-83.95 +0 +LINE +8 +Cmts +62 +1 +10 +114.49 +20 +-89.28 +11 +114.49 +21 +-83.95 +0 +LINE +8 +Cmts +62 +1 +10 +114.49 +20 +-86.65 +11 +116.89 +21 +-86.65 +0 +LINE +8 +Cmts +62 +1 +10 +116.89 +20 +-86.65 +11 +115.763496 +21 +-87.236421 +0 +LINE +8 +Cmts +62 +1 +10 +116.89 +20 +-86.65 +11 +115.763496 +21 +-86.063579 +0 +LINE +8 +Cmts +62 +1 +10 +114.49 +20 +-86.65 +11 +115.616504 +21 +-87.236421 +0 +LINE +8 +Cmts +62 +1 +10 +114.49 +20 +-86.65 +11 +115.616504 +21 +-86.063579 +0 +TEXT +8 +Cmts +62 +1 +10 +135.19 +20 +-90.49 +1 +12.800 mm +40 +1.5 +41 +1.5 +50 +270.0 +7 +SIMPLEX +72 +1 +73 +2 +11 +135.19 +21 +-90.49 +0 +LINE +8 +Cmts +62 +1 +10 +139.89 +20 +-96.89 +11 +133.84 +21 +-96.89 +0 +LINE +8 +Cmts +62 +1 +10 +139.89 +20 +-84.09 +11 +133.84 +21 +-84.09 +0 +LINE +8 +Cmts +62 +1 +10 +136.54 +20 +-84.09 +11 +136.54 +21 +-96.89 +0 +LINE +8 +Cmts +62 +1 +10 +136.54 +20 +-96.89 +11 +135.953579 +21 +-95.763496 +0 +LINE +8 +Cmts +62 +1 +10 +136.54 +20 +-96.89 +11 +137.126421 +21 +-95.763496 +0 +LINE +8 +Cmts +62 +1 +10 +136.54 +20 +-84.09 +11 +135.953579 +21 +-85.216504 +0 +LINE +8 +Cmts +62 +1 +10 +136.54 +20 +-84.09 +11 +137.126421 +21 +-85.216504 +0 +TEXT +8 +Cmts +62 +1 +10 +147.63 +20 +-105.02 +1 +15.500 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +147.63 +21 +-105.02 +0 +LINE +8 +Cmts +62 +1 +10 +139.88 +20 +-96.87 +11 +139.88 +21 +-106.37 +0 +LINE +8 +Cmts +62 +1 +10 +155.38 +20 +-96.87 +11 +155.38 +21 +-106.37 +0 +LINE +8 +Cmts +62 +1 +10 +155.38 +20 +-103.67 +11 +139.88 +21 +-103.67 +0 +LINE +8 +Cmts +62 +1 +10 +139.88 +20 +-103.67 +11 +141.006504 +21 +-103.083579 +0 +LINE +8 +Cmts +62 +1 +10 +139.88 +20 +-103.67 +11 +141.006504 +21 +-104.256421 +0 +LINE +8 +Cmts +62 +1 +10 +155.38 +20 +-103.67 +11 +154.253496 +21 +-103.083579 +0 +LINE +8 +Cmts +62 +1 +10 +155.38 +20 +-103.67 +11 +154.253496 +21 +-104.256421 +0 +CIRCLE +8 +0 +10 +30.75 +20 +-33.3375 +40 +3.15 +0 +CIRCLE +8 +0 +10 +195.4375 +20 +-90.4875 +40 +3.15 +0 +CIRCLE +8 +0 +10 +264.525 +20 +-33.3375 +40 +3.15 +0 +LINE +8 +0 +10 +290.1375 +20 +-7.7875 +11 +290.1375 +21 +-58.7125 +0 +LINE +8 +0 +10 +288.3375 +20 +-58.7125 +11 +290.1375 +21 +-58.7125 +0 +LINE +8 +0 +10 +5.1375 +20 +-65.0125 +11 +5.1375 +21 +-97.7875 +0 +LINE +8 +0 +10 +288.3375 +20 +-65.1125 +11 +290.1375 +21 +-65.1125 +0 +LINE +8 +0 +10 +8.7375 +20 +-65.0125 +11 +5.1375 +21 +-65.0125 +0 +LINE +8 +0 +10 +8.7375 +20 +-58.8125 +11 +5.1375 +21 +-58.8125 +0 +ARC +8 +0 +10 +8.7375 +20 +-61.9125 +30 +0.0 +40 +3.1 +50 +-90.0 +51 +90.0 +0 +ARC +8 +0 +10 +288.3375 +20 +-61.9125 +30 +0.0 +40 +3.2 +50 +90.0 +51 +270.0 +0 +TEXT +8 +Cmts +62 +1 +10 +277.6375 +20 +6.3625 +1 +25.000 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +277.6375 +21 +6.3625 +0 +LINE +8 +Cmts +62 +1 +10 +265.1375 +20 +-33.3375 +11 +265.1375 +21 +7.7125 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +-33.3375 +11 +290.1375 +21 +7.7125 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +5.0125 +11 +265.1375 +21 +5.0125 +0 +LINE +8 +Cmts +62 +1 +10 +265.1375 +20 +5.0125 +11 +266.264004 +21 +5.598921 +0 +LINE +8 +Cmts +62 +1 +10 +265.1375 +20 +5.0125 +11 +266.264004 +21 +4.426079 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +5.0125 +11 +289.010996 +21 +5.598921 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +5.0125 +11 +289.010996 +21 +4.426079 +0 +TEXT +8 +Cmts +62 +1 +10 +147.6375 +20 +10.875 +1 +285.000 mm +40 +1.5 +41 +1.5 +7 +SIMPLEX +72 +1 +73 +2 +11 +147.6375 +21 +10.875 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +-7.14375 +11 +290.1375 +21 +12.225 +0 +LINE +8 +Cmts +62 +1 +10 +5.1375 +20 +-7.14375 +11 +5.1375 +21 +12.225 +0 +LINE +8 +Cmts +62 +1 +10 +5.1375 +20 +9.525 +11 +290.1375 +21 +9.525 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +9.525 +11 +289.010996 +21 +8.938579 +0 +LINE +8 +Cmts +62 +1 +10 +290.1375 +20 +9.525 +11 +289.010996 +21 +10.111421 +0 +LINE +8 +Cmts +62 +1 +10 +5.1375 +20 +9.525 +11 +6.264004 +21 +8.938579 +0 +LINE +8 +Cmts +62 +1 +10 +5.1375 +20 +9.525 +11 +6.264004 +21 +10.111421 +0 +ARC +8 +0 +10 +7.6375 +20 +-97.7875 +30 +0.0 +40 +2.5 +50 +-180.0 +51 +-90.0 +0 +ARC +8 +0 +10 +287.6375 +20 +-97.7875 +30 +0.0 +40 +2.5 +50 +-90.0 +51 +0.0 +0 +ARC +8 +0 +10 +287.6375 +20 +-7.7875 +30 +0.0 +40 +2.5 +50 +0.0 +51 +90.0 +0 +ARC +8 +0 +10 +7.6375 +20 +-7.7875 +30 +0.0 +40 +2.5 +50 +90.0 +51 +180.0 +0 +LINE +8 +0 +10 +290.1375 +20 +-97.7875 +11 +290.1375 +21 +-65.1125 +0 +LINE +8 +0 +10 +7.6375 +20 +-100.2875 +11 +287.6375 +21 +-100.2875 +0 +LINE +8 +0 +10 +5.1375 +20 +-7.7875 +11 +5.1375 +21 +-58.8125 +0 +LINE +8 +0 +10 +7.6375 +20 +-5.2875 +11 +287.6375 +21 +-5.2875 +0 +ENDSEC +0 +EOF \ No newline at end of file diff --git a/keyboards/weebkeeb/config.h b/keyboards/weebkeeb/config.h new file mode 100644 index 0000000000..859adc9cc2 --- /dev/null +++ b/keyboards/weebkeeb/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT weebkeeb +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F4, F5, F6, F7 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7, C6, C7, F0, F1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/weebkeeb/keymaps/default/Makefile b/keyboards/weebkeeb/keymaps/default/Makefile new file mode 100644 index 0000000000..f4671a9d11 --- /dev/null +++ b/keyboards/weebkeeb/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/config.h b/keyboards/weebkeeb/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/weebkeeb/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/keymap.c b/keyboards/weebkeeb/keymaps/default/keymap.c new file mode 100644 index 0000000000..cdf1f1e4c7 --- /dev/null +++ b/keyboards/weebkeeb/keymaps/default/keymap.c @@ -0,0 +1,119 @@ +#include "weebkeeb.h" + +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + KC_LCTL, ADJUST, KC_LALT, KC_LGUI, MO(3), KC_SPC, KC_SPC, MO(4), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[3] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ + _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), +[4] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) +}; +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/readme.md b/keyboards/weebkeeb/keymaps/default/readme.md new file mode 100644 index 0000000000..8771322763 --- /dev/null +++ b/keyboards/weebkeeb/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for weebkeeb \ No newline at end of file diff --git a/keyboards/weebkeeb/readme.md b/keyboards/weebkeeb/readme.md new file mode 100644 index 0000000000..bf31016c82 --- /dev/null +++ b/keyboards/weebkeeb/readme.md @@ -0,0 +1,28 @@ +weebkeeb keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/weebkeeb folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|] +``` + +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/weebkeeb/rules.mk b/keyboards/weebkeeb/rules.mk new file mode 100644 index 0000000000..55898147dd --- /dev/null +++ b/keyboards/weebkeeb/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/weebkeeb/weebkeeb.c b/keyboards/weebkeeb/weebkeeb.c new file mode 100644 index 0000000000..483fc9440e --- /dev/null +++ b/keyboards/weebkeeb/weebkeeb.c @@ -0,0 +1,28 @@ +#include "weebkeeb.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/weebkeeb/weebkeeb.h b/keyboards/weebkeeb/weebkeeb.h new file mode 100644 index 0000000000..7bca2c2014 --- /dev/null +++ b/keyboards/weebkeeb/weebkeeb.h @@ -0,0 +1,23 @@ +#ifndef WEEBKEEB_H +#define WEEBKEEB_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ +} + +#endif From 45b7718fb154c6400b169a9d3005cedebd37ff9a Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 3 Dec 2016 17:30:40 -0500 Subject: [PATCH 109/124] cleaned up personal projects --- keyboards/pilcrow/Makefile | 3 - keyboards/pilcrow/config.h | 162 - keyboards/pilcrow/keymaps/default/Makefile | 21 - keyboards/pilcrow/keymaps/default/config.h | 8 - keyboards/pilcrow/keymaps/default/keymap.c | 88 - keyboards/pilcrow/keymaps/default/readme.md | 1 - keyboards/pilcrow/pilcrow.c | 28 - keyboards/pilcrow/pilcrow.h | 23 - keyboards/pilcrow/readme.md | 28 - keyboards/pilcrow/rules.mk | 67 - keyboards/weebkeeb/Makefile | 3 - keyboards/weebkeeb/aek.dxf | 6486 ------------------ keyboards/weebkeeb/config.h | 162 - keyboards/weebkeeb/keymaps/default/Makefile | 21 - keyboards/weebkeeb/keymaps/default/config.h | 8 - keyboards/weebkeeb/keymaps/default/keymap.c | 119 - keyboards/weebkeeb/keymaps/default/readme.md | 1 - keyboards/weebkeeb/readme.md | 28 - keyboards/weebkeeb/rules.mk | 67 - keyboards/weebkeeb/weebkeeb.c | 28 - keyboards/weebkeeb/weebkeeb.h | 23 - 21 files changed, 7375 deletions(-) delete mode 100644 keyboards/pilcrow/Makefile delete mode 100644 keyboards/pilcrow/config.h delete mode 100644 keyboards/pilcrow/keymaps/default/Makefile delete mode 100644 keyboards/pilcrow/keymaps/default/config.h delete mode 100644 keyboards/pilcrow/keymaps/default/keymap.c delete mode 100644 keyboards/pilcrow/keymaps/default/readme.md delete mode 100644 keyboards/pilcrow/pilcrow.c delete mode 100644 keyboards/pilcrow/pilcrow.h delete mode 100644 keyboards/pilcrow/readme.md delete mode 100644 keyboards/pilcrow/rules.mk delete mode 100644 keyboards/weebkeeb/Makefile delete mode 100644 keyboards/weebkeeb/aek.dxf delete mode 100644 keyboards/weebkeeb/config.h delete mode 100644 keyboards/weebkeeb/keymaps/default/Makefile delete mode 100644 keyboards/weebkeeb/keymaps/default/config.h delete mode 100644 keyboards/weebkeeb/keymaps/default/keymap.c delete mode 100644 keyboards/weebkeeb/keymaps/default/readme.md delete mode 100644 keyboards/weebkeeb/readme.md delete mode 100644 keyboards/weebkeeb/rules.mk delete mode 100644 keyboards/weebkeeb/weebkeeb.c delete mode 100644 keyboards/weebkeeb/weebkeeb.h diff --git a/keyboards/pilcrow/Makefile b/keyboards/pilcrow/Makefile deleted file mode 100644 index 4e2a6f00fd..0000000000 --- a/keyboards/pilcrow/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif \ No newline at end of file diff --git a/keyboards/pilcrow/config.h b/keyboards/pilcrow/config.h deleted file mode 100644 index d79c1ba40c..0000000000 --- a/keyboards/pilcrow/config.h +++ /dev/null @@ -1,162 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER You -#define PRODUCT pilcrow -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B2, C6, D7, E6 } -#define MATRIX_COL_PINS { B6, D1, B4, B5, D4, D0, B3, B1, F7, F6 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/pilcrow/keymaps/default/Makefile b/keyboards/pilcrow/keymaps/default/Makefile deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/pilcrow/keymaps/default/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/config.h b/keyboards/pilcrow/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/pilcrow/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/keymap.c b/keyboards/pilcrow/keymaps/default/keymap.c deleted file mode 100644 index e382e4c6ad..0000000000 --- a/keyboards/pilcrow/keymaps/default/keymap.c +++ /dev/null @@ -1,88 +0,0 @@ -#include "pilcrow.h" -#define _______ KC_TRNS -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( \ - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ - KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MT(MOD_LSFT, KC_SPC), MO(2), MO(3), KC_DEL, KC_ESC \ -), - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[1] = KEYMAP( \ - KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ - KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \ - _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \ -), -[2] = KEYMAP( \ - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ - KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ - OSM(MOD_LSFT), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \ - _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU \ -), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[3] = KEYMAP( \ - RESET, KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \ - KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON, AU_OFF, AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \ - RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \ - _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \ -) -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} \ No newline at end of file diff --git a/keyboards/pilcrow/keymaps/default/readme.md b/keyboards/pilcrow/keymaps/default/readme.md deleted file mode 100644 index 95472dfca8..0000000000 --- a/keyboards/pilcrow/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for pilcrow \ No newline at end of file diff --git a/keyboards/pilcrow/pilcrow.c b/keyboards/pilcrow/pilcrow.c deleted file mode 100644 index c8243df7bf..0000000000 --- a/keyboards/pilcrow/pilcrow.c +++ /dev/null @@ -1,28 +0,0 @@ -#include "pilcrow.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/pilcrow/pilcrow.h b/keyboards/pilcrow/pilcrow.h deleted file mode 100644 index 7138ccb3f6..0000000000 --- a/keyboards/pilcrow/pilcrow.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef PILCROW_H -#define PILCROW_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \ -} - -#endif diff --git a/keyboards/pilcrow/readme.md b/keyboards/pilcrow/readme.md deleted file mode 100644 index 7a7f6d2af5..0000000000 --- a/keyboards/pilcrow/readme.md +++ /dev/null @@ -1,28 +0,0 @@ -pilcrow keyboard firmware -====================== - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme](/). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|] -``` - -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/pilcrow/rules.mk b/keyboards/pilcrow/rules.mk deleted file mode 100644 index 55898147dd..0000000000 --- a/keyboards/pilcrow/rules.mk +++ /dev/null @@ -1,67 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/weebkeeb/Makefile b/keyboards/weebkeeb/Makefile deleted file mode 100644 index 4e2a6f00fd..0000000000 --- a/keyboards/weebkeeb/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif \ No newline at end of file diff --git a/keyboards/weebkeeb/aek.dxf b/keyboards/weebkeeb/aek.dxf deleted file mode 100644 index cfe80946bd..0000000000 --- a/keyboards/weebkeeb/aek.dxf +++ /dev/null @@ -1,6486 +0,0 @@ -0 -SECTION -2 -ENTITIES -0 -LINE -8 -0 -10 -104.7875 -20 --89.2875 -11 -104.7875 -21 --91.6875 -0 -LINE -8 -0 -10 -104.7875 -20 --91.6875 -11 -102.3875 -21 --91.6875 -0 -LINE -8 -0 -10 -102.3875 -20 --91.6875 -11 -102.3875 -21 --89.2875 -0 -LINE -8 -0 -10 -102.3875 -20 --89.2875 -11 -104.7875 -21 --89.2875 -0 -LINE -8 -0 -10 -116.8875 -20 --89.2875 -11 -116.8875 -21 --91.6875 -0 -LINE -8 -0 -10 -116.8875 -20 --91.6875 -11 -114.4875 -21 --91.6875 -0 -LINE -8 -0 -10 -114.4875 -20 --91.6875 -11 -114.4875 -21 --89.2875 -0 -LINE -8 -0 -10 -114.4875 -20 --89.2875 -11 -116.8875 -21 --89.2875 -0 -CIRCLE -8 -0 -10 -109.6375 -20 --90.4875 -40 -3.15 -0 -LINE -8 -0 -10 -103.4875 -20 --94.3875 -11 -103.4875 -21 --99.4875 -0 -LINE -8 -0 -10 -103.4875 -20 --99.4875 -11 -100.8875 -21 --99.4875 -0 -LINE -8 -0 -10 -100.8875 -20 --99.4875 -11 -100.8875 -21 --94.3875 -0 -LINE -8 -0 -10 -100.8875 -20 --94.3875 -11 -103.4875 -21 --94.3875 -0 -LINE -8 -0 -10 -191.7875 -20 --94.3875 -11 -191.7875 -21 --99.4875 -0 -LINE -8 -0 -10 -191.7875 -20 --99.4875 -11 -194.3875 -21 --99.4875 -0 -LINE -8 -0 -10 -194.3875 -20 --99.4875 -11 -194.3875 -21 --94.3875 -0 -LINE -8 -0 -10 -194.3875 -20 --94.3875 -11 -191.7875 -21 --94.3875 -0 -LINE -8 -0 -10 -155.3875 -20 --84.0875 -11 -139.8875 -21 --84.0875 -0 -LINE -8 -0 -10 -139.8875 -20 --84.0875 -11 -139.8875 -21 --96.8875 -0 -LINE -8 -0 -10 -139.8875 -20 --96.8875 -11 -155.3875 -21 --96.8875 -0 -LINE -8 -0 -10 -155.3875 -20 --96.8875 -11 -155.3875 -21 --84.0875 -0 -LINE -8 -0 -10 -256.28125 -20 --56.2875 -11 -256.28125 -21 --61.3875 -0 -LINE -8 -0 -10 -256.28125 -20 --61.3875 -11 -253.68125 -21 --61.3875 -0 -LINE -8 -0 -10 -253.68125 -20 --61.3875 -11 -253.68125 -21 --56.2875 -0 -LINE -8 -0 -10 -253.68125 -20 --56.2875 -11 -256.28125 -21 --56.2875 -0 -LINE -8 -0 -10 -281.88125 -20 --56.2875 -11 -281.88125 -21 --61.3875 -0 -LINE -8 -0 -10 -281.88125 -20 --61.3875 -11 -284.48125 -21 --61.3875 -0 -LINE -8 -0 -10 -284.48125 -20 --61.3875 -11 -284.48125 -21 --56.2875 -0 -LINE -8 -0 -10 -284.48125 -20 --56.2875 -11 -281.88125 -21 --56.2875 -0 -LINE -8 -0 -10 -276.83125 -20 --45.9875 -11 -261.33125 -21 --45.9875 -0 -LINE -8 -0 -10 -261.33125 -20 --45.9875 -11 -261.33125 -21 --58.7875 -0 -LINE -8 -0 -10 -261.33125 -20 --58.7875 -11 -276.83125 -21 --58.7875 -0 -LINE -8 -0 -10 -276.83125 -20 --58.7875 -11 -276.83125 -21 --45.9875 -0 -LINE -8 -0 -10 -258.6625 -20 --18.1875 -11 -258.6625 -21 --23.2875 -0 -LINE -8 -0 -10 -258.6625 -20 --23.2875 -11 -256.0625 -21 --23.2875 -0 -LINE -8 -0 -10 -256.0625 -20 --23.2875 -11 -256.0625 -21 --18.1875 -0 -LINE -8 -0 -10 -256.0625 -20 --18.1875 -11 -258.6625 -21 --18.1875 -0 -LINE -8 -0 -10 -284.2625 -20 --18.1875 -11 -284.2625 -21 --23.2875 -0 -LINE -8 -0 -10 -284.2625 -20 --23.2875 -11 -286.8625 -21 --23.2875 -0 -LINE -8 -0 -10 -286.8625 -20 --23.2875 -11 -286.8625 -21 --18.1875 -0 -LINE -8 -0 -10 -286.8625 -20 --18.1875 -11 -284.2625 -21 --18.1875 -0 -LINE -8 -0 -10 -279.2125 -20 --7.8875 -11 -263.7125 -21 --7.8875 -0 -LINE -8 -0 -10 -263.7125 -20 --7.8875 -11 -263.7125 -21 --20.6875 -0 -LINE -8 -0 -10 -263.7125 -20 --20.6875 -11 -279.2125 -21 --20.6875 -0 -LINE -8 -0 -10 -279.2125 -20 --20.6875 -11 -279.2125 -21 --7.8875 -0 -LINE -8 -0 -10 -13.39375 -20 --75.3375 -11 -13.39375 -21 --80.4375 -0 -LINE -8 -0 -10 -13.39375 -20 --80.4375 -11 -10.79375 -21 --80.4375 -0 -LINE -8 -0 -10 -10.79375 -20 --80.4375 -11 -10.79375 -21 --75.3375 -0 -LINE -8 -0 -10 -10.79375 -20 --75.3375 -11 -13.39375 -21 --75.3375 -0 -LINE -8 -0 -10 -38.99375 -20 --75.3375 -11 -38.99375 -21 --80.4375 -0 -LINE -8 -0 -10 -38.99375 -20 --80.4375 -11 -41.59375 -21 --80.4375 -0 -LINE -8 -0 -10 -41.59375 -20 --80.4375 -11 -41.59375 -21 --75.3375 -0 -LINE -8 -0 -10 -41.59375 -20 --75.3375 -11 -38.99375 -21 --75.3375 -0 -LINE -8 -0 -10 -33.94375 -20 --65.0375 -11 -18.44375 -21 --65.0375 -0 -LINE -8 -0 -10 -18.44375 -20 --65.0375 -11 -18.44375 -21 --77.8375 -0 -LINE -8 -0 -10 -18.44375 -20 --77.8375 -11 -33.94375 -21 --77.8375 -0 -LINE -8 -0 -10 -33.94375 -20 --77.8375 -11 -33.94375 -21 --65.0375 -0 -LINE -8 -0 -10 -193.4875 -20 --7.8875 -11 -177.9875 -21 --7.8875 -0 -LINE -8 -0 -10 -177.9875 -20 --7.8875 -11 -177.9875 -21 --20.6875 -0 -LINE -8 -0 -10 -177.9875 -20 --20.6875 -11 -193.4875 -21 --20.6875 -0 -LINE -8 -0 -10 -193.4875 -20 --20.6875 -11 -193.4875 -21 --7.8875 -0 -LINE -8 -0 -10 -174.4375 -20 --7.8875 -11 -158.9375 -21 --7.8875 -0 -LINE -8 -0 -10 -158.9375 -20 --7.8875 -11 -158.9375 -21 --20.6875 -0 -LINE -8 -0 -10 -158.9375 -20 --20.6875 -11 -174.4375 -21 --20.6875 -0 -LINE -8 -0 -10 -174.4375 -20 --20.6875 -11 -174.4375 -21 --7.8875 -0 -LINE -8 -0 -10 -183.9625 -20 --26.9375 -11 -168.4625 -21 --26.9375 -0 -LINE -8 -0 -10 -168.4625 -20 --26.9375 -11 -168.4625 -21 --39.7375 -0 -LINE -8 -0 -10 -168.4625 -20 --39.7375 -11 -183.9625 -21 --39.7375 -0 -LINE -8 -0 -10 -183.9625 -20 --39.7375 -11 -183.9625 -21 --26.9375 -0 -LINE -8 -0 -10 -169.675 -20 --45.9875 -11 -154.175 -21 --45.9875 -0 -LINE -8 -0 -10 -154.175 -20 --45.9875 -11 -154.175 -21 --58.7875 -0 -LINE -8 -0 -10 -154.175 -20 --58.7875 -11 -169.675 -21 --58.7875 -0 -LINE -8 -0 -10 -169.675 -20 --58.7875 -11 -169.675 -21 --45.9875 -0 -LINE -8 -0 -10 -150.625 -20 --45.9875 -11 -135.125 -21 --45.9875 -0 -LINE -8 -0 -10 -135.125 -20 --45.9875 -11 -135.125 -21 --58.7875 -0 -LINE -8 -0 -10 -135.125 -20 --58.7875 -11 -150.625 -21 --58.7875 -0 -LINE -8 -0 -10 -150.625 -20 --58.7875 -11 -150.625 -21 --45.9875 -0 -LINE -8 -0 -10 -160.15 -20 --65.0375 -11 -144.65 -21 --65.0375 -0 -LINE -8 -0 -10 -144.65 -20 --65.0375 -11 -144.65 -21 --77.8375 -0 -LINE -8 -0 -10 -144.65 -20 --77.8375 -11 -160.15 -21 --77.8375 -0 -LINE -8 -0 -10 -160.15 -20 --77.8375 -11 -160.15 -21 --65.0375 -0 -LINE -8 -0 -10 -141.1 -20 --65.0375 -11 -125.6 -21 --65.0375 -0 -LINE -8 -0 -10 -125.6 -20 --65.0375 -11 -125.6 -21 --77.8375 -0 -LINE -8 -0 -10 -125.6 -20 --77.8375 -11 -141.1 -21 --77.8375 -0 -LINE -8 -0 -10 -141.1 -20 --77.8375 -11 -141.1 -21 --65.0375 -0 -LINE -8 -0 -10 -155.3875 -20 --7.8875 -11 -139.8875 -21 --7.8875 -0 -LINE -8 -0 -10 -139.8875 -20 --7.8875 -11 -139.8875 -21 --20.6875 -0 -LINE -8 -0 -10 -139.8875 -20 --20.6875 -11 -155.3875 -21 --20.6875 -0 -LINE -8 -0 -10 -155.3875 -20 --20.6875 -11 -155.3875 -21 --7.8875 -0 -LINE -8 -0 -10 -136.3375 -20 --7.8875 -11 -120.8375 -21 --7.8875 -0 -LINE -8 -0 -10 -120.8375 -20 --7.8875 -11 -120.8375 -21 --20.6875 -0 -LINE -8 -0 -10 -120.8375 -20 --20.6875 -11 -136.3375 -21 --20.6875 -0 -LINE -8 -0 -10 -136.3375 -20 --20.6875 -11 -136.3375 -21 --7.8875 -0 -LINE -8 -0 -10 -164.9125 -20 --26.9375 -11 -149.4125 -21 --26.9375 -0 -LINE -8 -0 -10 -149.4125 -20 --26.9375 -11 -149.4125 -21 --39.7375 -0 -LINE -8 -0 -10 -149.4125 -20 --39.7375 -11 -164.9125 -21 --39.7375 -0 -LINE -8 -0 -10 -164.9125 -20 --39.7375 -11 -164.9125 -21 --26.9375 -0 -LINE -8 -0 -10 -145.8625 -20 --26.9375 -11 -130.3625 -21 --26.9375 -0 -LINE -8 -0 -10 -130.3625 -20 --26.9375 -11 -130.3625 -21 --39.7375 -0 -LINE -8 -0 -10 -130.3625 -20 --39.7375 -11 -145.8625 -21 --39.7375 -0 -LINE -8 -0 -10 -145.8625 -20 --39.7375 -11 -145.8625 -21 --26.9375 -0 -LINE -8 -0 -10 -131.575 -20 --45.9875 -11 -116.075 -21 --45.9875 -0 -LINE -8 -0 -10 -116.075 -20 --45.9875 -11 -116.075 -21 --58.7875 -0 -LINE -8 -0 -10 -116.075 -20 --58.7875 -11 -131.575 -21 --58.7875 -0 -LINE -8 -0 -10 -131.575 -20 --58.7875 -11 -131.575 -21 --45.9875 -0 -LINE -8 -0 -10 -122.05 -20 --65.0375 -11 -106.55 -21 --65.0375 -0 -LINE -8 -0 -10 -106.55 -20 --65.0375 -11 -106.55 -21 --77.8375 -0 -LINE -8 -0 -10 -106.55 -20 --77.8375 -11 -122.05 -21 --77.8375 -0 -LINE -8 -0 -10 -122.05 -20 --77.8375 -11 -122.05 -21 --65.0375 -0 -LINE -8 -0 -10 -103.0 -20 --65.0375 -11 -87.5 -21 --65.0375 -0 -LINE -8 -0 -10 -87.5 -20 --65.0375 -11 -87.5 -21 --77.8375 -0 -LINE -8 -0 -10 -87.5 -20 --77.8375 -11 -103.0 -21 --77.8375 -0 -LINE -8 -0 -10 -103.0 -20 --77.8375 -11 -103.0 -21 --65.0375 -0 -LINE -8 -0 -10 -117.2875 -20 --7.8875 -11 -101.7875 -21 --7.8875 -0 -LINE -8 -0 -10 -101.7875 -20 --7.8875 -11 -101.7875 -21 --20.6875 -0 -LINE -8 -0 -10 -101.7875 -20 --20.6875 -11 -117.2875 -21 --20.6875 -0 -LINE -8 -0 -10 -117.2875 -20 --20.6875 -11 -117.2875 -21 --7.8875 -0 -LINE -8 -0 -10 -98.2375 -20 --7.8875 -11 -82.7375 -21 --7.8875 -0 -LINE -8 -0 -10 -82.7375 -20 --7.8875 -11 -82.7375 -21 --20.6875 -0 -LINE -8 -0 -10 -82.7375 -20 --20.6875 -11 -98.2375 -21 --20.6875 -0 -LINE -8 -0 -10 -98.2375 -20 --20.6875 -11 -98.2375 -21 --7.8875 -0 -LINE -8 -0 -10 -126.8125 -20 --26.9375 -11 -111.3125 -21 --26.9375 -0 -LINE -8 -0 -10 -111.3125 -20 --26.9375 -11 -111.3125 -21 --39.7375 -0 -LINE -8 -0 -10 -111.3125 -20 --39.7375 -11 -126.8125 -21 --39.7375 -0 -LINE -8 -0 -10 -126.8125 -20 --39.7375 -11 -126.8125 -21 --26.9375 -0 -LINE -8 -0 -10 -107.7625 -20 --26.9375 -11 -92.2625 -21 --26.9375 -0 -LINE -8 -0 -10 -92.2625 -20 --26.9375 -11 -92.2625 -21 --39.7375 -0 -LINE -8 -0 -10 -92.2625 -20 --39.7375 -11 -107.7625 -21 --39.7375 -0 -LINE -8 -0 -10 -107.7625 -20 --39.7375 -11 -107.7625 -21 --26.9375 -0 -LINE -8 -0 -10 -112.525 -20 --45.9875 -11 -97.025 -21 --45.9875 -0 -LINE -8 -0 -10 -97.025 -20 --45.9875 -11 -97.025 -21 --58.7875 -0 -LINE -8 -0 -10 -97.025 -20 --58.7875 -11 -112.525 -21 --58.7875 -0 -LINE -8 -0 -10 -112.525 -20 --58.7875 -11 -112.525 -21 --45.9875 -0 -LINE -8 -0 -10 -93.475 -20 --45.9875 -11 -77.975 -21 --45.9875 -0 -LINE -8 -0 -10 -77.975 -20 --45.9875 -11 -77.975 -21 --58.7875 -0 -LINE -8 -0 -10 -77.975 -20 --58.7875 -11 -93.475 -21 --58.7875 -0 -LINE -8 -0 -10 -93.475 -20 --58.7875 -11 -93.475 -21 --45.9875 -0 -LINE -8 -0 -10 -83.95 -20 --65.0375 -11 -68.45 -21 --65.0375 -0 -LINE -8 -0 -10 -68.45 -20 --65.0375 -11 -68.45 -21 --77.8375 -0 -LINE -8 -0 -10 -68.45 -20 --77.8375 -11 -83.95 -21 --77.8375 -0 -LINE -8 -0 -10 -83.95 -20 --77.8375 -11 -83.95 -21 --65.0375 -0 -LINE -8 -0 -10 -79.1875 -20 --84.0875 -11 -63.6875 -21 --84.0875 -0 -LINE -8 -0 -10 -63.6875 -20 --84.0875 -11 -63.6875 -21 --96.8875 -0 -LINE -8 -0 -10 -63.6875 -20 --96.8875 -11 -79.1875 -21 --96.8875 -0 -LINE -8 -0 -10 -79.1875 -20 --96.8875 -11 -79.1875 -21 --84.0875 -0 -LINE -8 -0 -10 -79.1875 -20 --7.8875 -11 -63.6875 -21 --7.8875 -0 -LINE -8 -0 -10 -63.6875 -20 --7.8875 -11 -63.6875 -21 --20.6875 -0 -LINE -8 -0 -10 -63.6875 -20 --20.6875 -11 -79.1875 -21 --20.6875 -0 -LINE -8 -0 -10 -79.1875 -20 --20.6875 -11 -79.1875 -21 --7.8875 -0 -LINE -8 -0 -10 -60.1375 -20 --7.8875 -11 -44.6375 -21 --7.8875 -0 -LINE -8 -0 -10 -44.6375 -20 --7.8875 -11 -44.6375 -21 --20.6875 -0 -LINE -8 -0 -10 -44.6375 -20 --20.6875 -11 -60.1375 -21 --20.6875 -0 -LINE -8 -0 -10 -60.1375 -20 --20.6875 -11 -60.1375 -21 --7.8875 -0 -LINE -8 -0 -10 -88.7125 -20 --26.9375 -11 -73.2125 -21 --26.9375 -0 -LINE -8 -0 -10 -73.2125 -20 --26.9375 -11 -73.2125 -21 --39.7375 -0 -LINE -8 -0 -10 -73.2125 -20 --39.7375 -11 -88.7125 -21 --39.7375 -0 -LINE -8 -0 -10 -88.7125 -20 --39.7375 -11 -88.7125 -21 --26.9375 -0 -LINE -8 -0 -10 -69.6625 -20 --26.9375 -11 -54.1625 -21 --26.9375 -0 -LINE -8 -0 -10 -54.1625 -20 --26.9375 -11 -54.1625 -21 --39.7375 -0 -LINE -8 -0 -10 -54.1625 -20 --39.7375 -11 -69.6625 -21 --39.7375 -0 -LINE -8 -0 -10 -69.6625 -20 --39.7375 -11 -69.6625 -21 --26.9375 -0 -LINE -8 -0 -10 -74.425 -20 --45.9875 -11 -58.925 -21 --45.9875 -0 -LINE -8 -0 -10 -58.925 -20 --45.9875 -11 -58.925 -21 --58.7875 -0 -LINE -8 -0 -10 -58.925 -20 --58.7875 -11 -74.425 -21 --58.7875 -0 -LINE -8 -0 -10 -74.425 -20 --58.7875 -11 -74.425 -21 --45.9875 -0 -LINE -8 -0 -10 -64.9 -20 --65.0375 -11 -49.4 -21 --65.0375 -0 -LINE -8 -0 -10 -49.4 -20 --65.0375 -11 -49.4 -21 --77.8375 -0 -LINE -8 -0 -10 -49.4 -20 --77.8375 -11 -64.9 -21 --77.8375 -0 -LINE -8 -0 -10 -64.9 -20 --77.8375 -11 -64.9 -21 --65.0375 -0 -LINE -8 -0 -10 -52.9937 -20 --84.0875 -11 -37.4937 -21 --84.0875 -0 -LINE -8 -0 -10 -37.4937 -20 --84.0875 -11 -37.4937 -21 --96.8875 -0 -LINE -8 -0 -10 -37.4937 -20 --96.8875 -11 -52.9937 -21 --96.8875 -0 -LINE -8 -0 -10 -52.9937 -20 --96.8875 -11 -52.9937 -21 --84.0875 -0 -LINE -8 -0 -10 -41.0875 -20 --7.8875 -11 -25.5875 -21 --7.8875 -0 -LINE -8 -0 -10 -25.5875 -20 --7.8875 -11 -25.5875 -21 --20.6875 -0 -LINE -8 -0 -10 -25.5875 -20 --20.6875 -11 -41.0875 -21 --20.6875 -0 -LINE -8 -0 -10 -41.0875 -20 --20.6875 -11 -41.0875 -21 --7.8875 -0 -LINE -8 -0 -10 -22.0375 -20 --7.8875 -11 -6.5375 -21 --7.8875 -0 -LINE -8 -0 -10 -6.5375 -20 --7.8875 -11 -6.5375 -21 --20.6875 -0 -LINE -8 -0 -10 -6.5375 -20 --20.6875 -11 -22.0375 -21 --20.6875 -0 -LINE -8 -0 -10 -22.0375 -20 --20.6875 -11 -22.0375 -21 --7.8875 -0 -LINE -8 -0 -10 -50.6125 -20 --26.9375 -11 -35.1125 -21 --26.9375 -0 -LINE -8 -0 -10 -35.1125 -20 --26.9375 -11 -35.1125 -21 --39.7375 -0 -LINE -8 -0 -10 -35.1125 -20 --39.7375 -11 -50.6125 -21 --39.7375 -0 -LINE -8 -0 -10 -50.6125 -20 --39.7375 -11 -50.6125 -21 --26.9375 -0 -LINE -8 -0 -10 -26.8 -20 --26.9375 -11 -11.3 -21 --26.9375 -0 -LINE -8 -0 -10 -11.3 -20 --26.9375 -11 -11.3 -21 --39.7375 -0 -LINE -8 -0 -10 -11.3 -20 --39.7375 -11 -26.8 -21 --39.7375 -0 -LINE -8 -0 -10 -26.8 -20 --39.7375 -11 -26.8 -21 --26.9375 -0 -LINE -8 -0 -10 -55.375 -20 --45.9875 -11 -39.875 -21 --45.9875 -0 -LINE -8 -0 -10 -39.875 -20 --45.9875 -11 -39.875 -21 --58.7875 -0 -LINE -8 -0 -10 -39.875 -20 --58.7875 -11 -55.375 -21 --58.7875 -0 -LINE -8 -0 -10 -55.375 -20 --58.7875 -11 -55.375 -21 --45.9875 -0 -LINE -8 -0 -10 -29.18125 -20 --45.9875 -11 -13.68125 -21 --45.9875 -0 -LINE -8 -0 -10 -13.68125 -20 --45.9875 -11 -13.68125 -21 --58.7875 -0 -LINE -8 -0 -10 -13.68125 -20 --58.7875 -11 -29.18125 -21 --58.7875 -0 -LINE -8 -0 -10 -29.18125 -20 --58.7875 -11 -29.18125 -21 --45.9875 -0 -LINE -8 -0 -10 -26.8 -20 --84.0875 -11 -11.3 -21 --84.0875 -0 -LINE -8 -0 -10 -11.3 -20 --84.0875 -11 -11.3 -21 --96.8875 -0 -LINE -8 -0 -10 -11.3 -20 --96.8875 -11 -26.8 -21 --96.8875 -0 -LINE -8 -0 -10 -26.8 -20 --96.8875 -11 -26.8 -21 --84.0875 -0 -LINE -8 -0 -10 -260.1625 -20 --26.9375 -11 -244.6625 -21 --26.9375 -0 -LINE -8 -0 -10 -244.6625 -20 --26.9375 -11 -244.6625 -21 --39.7375 -0 -LINE -8 -0 -10 -244.6625 -20 --39.7375 -11 -260.1625 -21 --39.7375 -0 -LINE -8 -0 -10 -260.1625 -20 --39.7375 -11 -260.1625 -21 --26.9375 -0 -LINE -8 -0 -10 -283.975 -20 --26.9375 -11 -268.475 -21 --26.9375 -0 -LINE -8 -0 -10 -268.475 -20 --26.9375 -11 -268.475 -21 --39.7375 -0 -LINE -8 -0 -10 -268.475 -20 --39.7375 -11 -283.975 -21 --39.7375 -0 -LINE -8 -0 -10 -283.975 -20 --39.7375 -11 -283.975 -21 --26.9375 -0 -LINE -8 -0 -10 -283.975 -20 --84.0875 -11 -268.475 -21 --84.0875 -0 -LINE -8 -0 -10 -268.475 -20 --84.0875 -11 -268.475 -21 --96.8875 -0 -LINE -8 -0 -10 -268.475 -20 --96.8875 -11 -283.975 -21 --96.8875 -0 -LINE -8 -0 -10 -283.975 -20 --96.8875 -11 -283.975 -21 --84.0875 -0 -LINE -8 -0 -10 -250.6375 -20 --7.8875 -11 -235.1375 -21 --7.8875 -0 -LINE -8 -0 -10 -235.1375 -20 --7.8875 -11 -235.1375 -21 --20.6875 -0 -LINE -8 -0 -10 -235.1375 -20 --20.6875 -11 -250.6375 -21 --20.6875 -0 -LINE -8 -0 -10 -250.6375 -20 --20.6875 -11 -250.6375 -21 --7.8875 -0 -LINE -8 -0 -10 -241.1125 -20 --26.9375 -11 -225.6125 -21 --26.9375 -0 -LINE -8 -0 -10 -225.6125 -20 --26.9375 -11 -225.6125 -21 --39.7375 -0 -LINE -8 -0 -10 -225.6125 -20 --39.7375 -11 -241.1125 -21 --39.7375 -0 -LINE -8 -0 -10 -241.1125 -20 --39.7375 -11 -241.1125 -21 --26.9375 -0 -LINE -8 -0 -10 -222.0625 -20 --26.9375 -11 -206.5625 -21 --26.9375 -0 -LINE -8 -0 -10 -206.5625 -20 --26.9375 -11 -206.5625 -21 --39.7375 -0 -LINE -8 -0 -10 -206.5625 -20 --39.7375 -11 -222.0625 -21 --39.7375 -0 -LINE -8 -0 -10 -222.0625 -20 --39.7375 -11 -222.0625 -21 --26.9375 -0 -LINE -8 -0 -10 -245.875 -20 --45.9875 -11 -230.375 -21 --45.9875 -0 -LINE -8 -0 -10 -230.375 -20 --45.9875 -11 -230.375 -21 --58.7875 -0 -LINE -8 -0 -10 -230.375 -20 --58.7875 -11 -245.875 -21 --58.7875 -0 -LINE -8 -0 -10 -245.875 -20 --58.7875 -11 -245.875 -21 --45.9875 -0 -LINE -8 -0 -10 -226.825 -20 --45.9875 -11 -211.325 -21 --45.9875 -0 -LINE -8 -0 -10 -211.325 -20 --45.9875 -11 -211.325 -21 --58.7875 -0 -LINE -8 -0 -10 -211.325 -20 --58.7875 -11 -226.825 -21 --58.7875 -0 -LINE -8 -0 -10 -226.825 -20 --58.7875 -11 -226.825 -21 --45.9875 -0 -LINE -8 -0 -10 -236.35 -20 --65.0375 -11 -220.85 -21 --65.0375 -0 -LINE -8 -0 -10 -220.85 -20 --65.0375 -11 -220.85 -21 --77.8375 -0 -LINE -8 -0 -10 -220.85 -20 --77.8375 -11 -236.35 -21 --77.8375 -0 -LINE -8 -0 -10 -236.35 -20 --77.8375 -11 -236.35 -21 --65.0375 -0 -LINE -8 -0 -10 -217.3 -20 --65.0375 -11 -201.8 -21 --65.0375 -0 -LINE -8 -0 -10 -201.8 -20 --65.0375 -11 -201.8 -21 --77.8375 -0 -LINE -8 -0 -10 -201.8 -20 --77.8375 -11 -217.3 -21 --77.8375 -0 -LINE -8 -0 -10 -217.3 -20 --77.8375 -11 -217.3 -21 --65.0375 -0 -LINE -8 -0 -10 -257.78125 -20 --84.0875 -11 -242.28125 -21 --84.0875 -0 -LINE -8 -0 -10 -242.28125 -20 --84.0875 -11 -242.28125 -21 --96.8875 -0 -LINE -8 -0 -10 -242.28125 -20 --96.8875 -11 -257.78125 -21 --96.8875 -0 -LINE -8 -0 -10 -257.78125 -20 --96.8875 -11 -257.78125 -21 --84.0875 -0 -LINE -8 -0 -10 -231.5875 -20 --7.8875 -11 -216.0875 -21 --7.8875 -0 -LINE -8 -0 -10 -216.0875 -20 --7.8875 -11 -216.0875 -21 --20.6875 -0 -LINE -8 -0 -10 -216.0875 -20 --20.6875 -11 -231.5875 -21 --20.6875 -0 -LINE -8 -0 -10 -231.5875 -20 --20.6875 -11 -231.5875 -21 --7.8875 -0 -LINE -8 -0 -10 -212.5375 -20 --7.8875 -11 -197.0375 -21 --7.8875 -0 -LINE -8 -0 -10 -197.0375 -20 --7.8875 -11 -197.0375 -21 --20.6875 -0 -LINE -8 -0 -10 -197.0375 -20 --20.6875 -11 -212.5375 -21 --20.6875 -0 -LINE -8 -0 -10 -212.5375 -20 --20.6875 -11 -212.5375 -21 --7.8875 -0 -LINE -8 -0 -10 -203.0125 -20 --26.9375 -11 -187.5125 -21 --26.9375 -0 -LINE -8 -0 -10 -187.5125 -20 --26.9375 -11 -187.5125 -21 --39.7375 -0 -LINE -8 -0 -10 -187.5125 -20 --39.7375 -11 -203.0125 -21 --39.7375 -0 -LINE -8 -0 -10 -203.0125 -20 --39.7375 -11 -203.0125 -21 --26.9375 -0 -LINE -8 -0 -10 -207.775 -20 --45.9875 -11 -192.275 -21 --45.9875 -0 -LINE -8 -0 -10 -192.275 -20 --45.9875 -11 -192.275 -21 --58.7875 -0 -LINE -8 -0 -10 -192.275 -20 --58.7875 -11 -207.775 -21 --58.7875 -0 -LINE -8 -0 -10 -207.775 -20 --58.7875 -11 -207.775 -21 --45.9875 -0 -LINE -8 -0 -10 -188.725 -20 --45.9875 -11 -173.225 -21 --45.9875 -0 -LINE -8 -0 -10 -173.225 -20 --45.9875 -11 -173.225 -21 --58.7875 -0 -LINE -8 -0 -10 -173.225 -20 --58.7875 -11 -188.725 -21 --58.7875 -0 -LINE -8 -0 -10 -188.725 -20 --58.7875 -11 -188.725 -21 --45.9875 -0 -LINE -8 -0 -10 -198.25 -20 --65.0375 -11 -182.75 -21 --65.0375 -0 -LINE -8 -0 -10 -182.75 -20 --65.0375 -11 -182.75 -21 --77.8375 -0 -LINE -8 -0 -10 -182.75 -20 --77.8375 -11 -198.25 -21 --77.8375 -0 -LINE -8 -0 -10 -198.25 -20 --77.8375 -11 -198.25 -21 --65.0375 -0 -LINE -8 -0 -10 -179.2 -20 --65.0375 -11 -163.7 -21 --65.0375 -0 -LINE -8 -0 -10 -163.7 -20 --65.0375 -11 -163.7 -21 --77.8375 -0 -LINE -8 -0 -10 -163.7 -20 --77.8375 -11 -179.2 -21 --77.8375 -0 -LINE -8 -0 -10 -179.2 -20 --77.8375 -11 -179.2 -21 --65.0375 -0 -LINE -8 -0 -10 -231.5875 -20 --84.0875 -11 -216.0875 -21 --84.0875 -0 -LINE -8 -0 -10 -216.0875 -20 --84.0875 -11 -216.0875 -21 --96.8875 -0 -LINE -8 -0 -10 -216.0875 -20 --96.8875 -11 -231.5875 -21 --96.8875 -0 -LINE -8 -0 -10 -231.5875 -20 --96.8875 -11 -231.5875 -21 --84.0875 -0 -LINE -8 -0 -10 -244.01875 -20 --75.3375 -11 -244.01875 -21 --80.4375 -0 -LINE -8 -0 -10 -244.01875 -20 --80.4375 -11 -241.41875 -21 --80.4375 -0 -LINE -8 -0 -10 -241.41875 -20 --80.4375 -11 -241.41875 -21 --75.3375 -0 -LINE -8 -0 -10 -241.41875 -20 --75.3375 -11 -244.01875 -21 --75.3375 -0 -LINE -8 -0 -10 -284.61875 -20 --75.3375 -11 -284.61875 -21 --80.4375 -0 -LINE -8 -0 -10 -284.61875 -20 --80.4375 -11 -287.21875 -21 --80.4375 -0 -LINE -8 -0 -10 -287.21875 -20 --80.4375 -11 -287.21875 -21 --75.3375 -0 -LINE -8 -0 -10 -287.21875 -20 --75.3375 -11 -284.61875 -21 --75.3375 -0 -LINE -8 -0 -10 -272.06875 -20 --65.0375 -11 -256.56875 -21 --65.0375 -0 -LINE -8 -0 -10 -256.56875 -20 --65.0375 -11 -256.56875 -21 --77.8375 -0 -LINE -8 -0 -10 -256.56875 -20 --77.8375 -11 -272.06875 -21 --77.8375 -0 -LINE -8 -0 -10 -272.06875 -20 --77.8375 -11 -272.06875 -21 --65.0375 -0 -TEXT -8 -Cmts -62 -1 -10 -303.847897 -20 --52.73062 -1 -95.000 mm -40 -1.5 -41 -1.5 -50 -270.186984 -7 -SIMPLEX -72 -1 -73 -2 -11 -303.847897 -21 --52.73062 -0 -LINE -8 -Cmts -62 -1 -10 -287.34 -20 --100.28 -11 -305.35289 -21 --100.221215 -0 -LINE -8 -Cmts -62 -1 -10 -287.03 -20 --5.29 -11 -305.04289 -21 --5.231215 -0 -LINE -8 -Cmts -62 -1 -10 -302.342904 -20 --5.240026 -11 -302.652904 -21 --100.230026 -0 -LINE -8 -Cmts -62 -1 -10 -302.652904 -20 --100.230026 -11 -302.06281 -21 --99.105442 -0 -LINE -8 -Cmts -62 -1 -10 -302.652904 -20 --100.230026 -11 -303.235645 -21 --99.101614 -0 -LINE -8 -Cmts -62 -1 -10 -302.342904 -20 --5.240026 -11 -301.760163 -21 --6.368438 -0 -LINE -8 -Cmts -62 -1 -10 -302.342904 -20 --5.240026 -11 -302.932998 -21 --6.36461 -0 -TEXT -8 -Cmts -62 -1 -10 -17.92 -20 --43.7 -1 -25.6125 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -17.92 -21 --43.7 -0 -LINE -8 -Cmts -62 -1 -10 -30.71 -20 --33.34 -11 -30.71 -21 --45.05 -0 -LINE -8 -Cmts -62 -1 -10 -5.13 -20 --33.34 -11 -5.13 -21 --45.05 -0 -LINE -8 -Cmts -62 -1 -10 -5.13 -20 --42.35 -11 -30.71 -21 --42.35 -0 -LINE -8 -Cmts -62 -1 -10 -30.71 -20 --42.35 -11 -29.583496 -21 --42.936421 -0 -LINE -8 -Cmts -62 -1 -10 -30.71 -20 --42.35 -11 -29.583496 -21 --41.763579 -0 -LINE -8 -Cmts -62 -1 -10 -5.13 -20 --42.35 -11 -6.256504 -21 --42.936421 -0 -LINE -8 -Cmts -62 -1 -10 -5.13 -20 --42.35 -11 -6.256504 -21 --41.763579 -0 -TEXT -8 -Cmts -62 -1 -10 -277.347461 -20 --39.634741 -1 -25.6125 mm -40 -1.5 -41 -1.5 -50 -0.022425 -7 -SIMPLEX -72 -1 -73 -2 -11 -277.347461 -21 --39.634741 -0 -LINE -8 -Cmts -62 -1 -10 -290.12 -20 --33.34 -11 -290.12299 -21 --40.979741 -0 -LINE -8 -Cmts -62 -1 -10 -264.57 -20 --33.35 -11 -264.57299 -21 --40.989741 -0 -LINE -8 -Cmts -62 -1 -10 -264.571933 -20 --38.289741 -11 -290.121933 -21 --38.279741 -0 -LINE -8 -Cmts -62 -1 -10 -290.121933 -20 --38.279741 -11 -288.995659 -21 --38.866603 -0 -LINE -8 -Cmts -62 -1 -10 -290.121933 -20 --38.279741 -11 -288.9952 -21 --37.693761 -0 -LINE -8 -Cmts -62 -1 -10 -264.571933 -20 --38.289741 -11 -265.698666 -21 --38.875721 -0 -LINE -8 -Cmts -62 -1 -10 -264.571933 -20 --38.289741 -11 -265.698207 -21 --37.702879 -0 -TEXT -8 -Cmts -62 -1 -10 -202.7 -20 --90.49 -1 -6.300 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -202.7 -21 --90.49 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --93.64 -11 -204.05 -21 --93.64 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --87.34 -11 -204.05 -21 --87.34 -0 -LINE -8 -Cmts -62 -1 -10 -201.35 -20 --87.34 -11 -201.35 -21 --93.64 -0 -LINE -8 -Cmts -62 -1 -10 -201.35 -20 --93.64 -11 -200.763579 -21 --92.513496 -0 -LINE -8 -Cmts -62 -1 -10 -201.35 -20 --93.64 -11 -201.936421 -21 --92.513496 -0 -LINE -8 -Cmts -62 -1 -10 -201.35 -20 --87.34 -11 -200.763579 -21 --88.466504 -0 -LINE -8 -Cmts -62 -1 -10 -201.35 -20 --87.34 -11 -201.936421 -21 --88.466504 -0 -TEXT -8 -Cmts -62 -1 -10 -258.43468 -20 --33.349763 -1 -6.300 mm -40 -1.5 -41 -1.5 -50 -270.090946 -7 -SIMPLEX -72 -1 -73 -2 -11 -258.43468 -21 --33.349763 -0 -LINE -8 -Cmts -62 -1 -10 -264.59 -20 --36.49 -11 -257.089682 -21 --36.501906 -0 -LINE -8 -Cmts -62 -1 -10 -264.58 -20 --30.19 -11 -257.079682 -21 --30.201906 -0 -LINE -8 -Cmts -62 -1 -10 -259.779679 -20 --30.19762 -11 -259.789679 -21 --36.49762 -0 -LINE -8 -Cmts -62 -1 -10 -259.789679 -20 --36.49762 -11 -259.201471 -21 --35.372048 -0 -LINE -8 -Cmts -62 -1 -10 -259.789679 -20 --36.49762 -11 -260.374311 -21 --35.370187 -0 -LINE -8 -Cmts -62 -1 -10 -259.779679 -20 --30.19762 -11 -259.195047 -21 --31.325053 -0 -LINE -8 -Cmts -62 -1 -10 -259.779679 -20 --30.19762 -11 -260.367887 -21 --31.323192 -0 -TEXT -8 -Cmts -62 -1 -10 -24.47 -20 --33.33 -1 -6.300 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -24.47 -21 --33.33 -0 -LINE -8 -Cmts -62 -1 -10 -30.72 -20 --36.48 -11 -23.12 -21 --36.48 -0 -LINE -8 -Cmts -62 -1 -10 -30.72 -20 --30.18 -11 -23.12 -21 --30.18 -0 -LINE -8 -Cmts -62 -1 -10 -25.82 -20 --30.18 -11 -25.82 -21 --36.48 -0 -LINE -8 -Cmts -62 -1 -10 -25.82 -20 --36.48 -11 -25.233579 -21 --35.353496 -0 -LINE -8 -Cmts -62 -1 -10 -25.82 -20 --36.48 -11 -26.406421 -21 --35.353496 -0 -LINE -8 -Cmts -62 -1 -10 -25.82 -20 --30.18 -11 -25.233579 -21 --31.306504 -0 -LINE -8 -Cmts -62 -1 -10 -25.82 -20 --30.18 -11 -26.406421 -21 --31.306504 -0 -TEXT -8 -Cmts -62 -1 -10 -103.46 -20 --90.49 -1 -6.300 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -103.46 -21 --90.49 -0 -LINE -8 -Cmts -62 -1 -10 -109.64 -20 --93.64 -11 -102.11 -21 --93.64 -0 -LINE -8 -Cmts -62 -1 -10 -109.64 -20 --87.34 -11 -102.11 -21 --87.34 -0 -LINE -8 -Cmts -62 -1 -10 -104.81 -20 --87.34 -11 -104.81 -21 --93.64 -0 -LINE -8 -Cmts -62 -1 -10 -104.81 -20 --93.64 -11 -104.223579 -21 --92.513496 -0 -LINE -8 -Cmts -62 -1 -10 -104.81 -20 --93.64 -11 -105.396421 -21 --92.513496 -0 -LINE -8 -Cmts -62 -1 -10 -104.81 -20 --87.34 -11 -104.223579 -21 --88.466504 -0 -LINE -8 -Cmts -62 -1 -10 -104.81 -20 --87.34 -11 -105.396421 -21 --88.466504 -0 -TEXT -8 -Cmts -62 -1 -10 -171.54 -20 --78.67 -1 -47.800 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -171.54 -21 --78.67 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --90.49 -11 -147.64 -21 --77.32 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --90.49 -11 -195.44 -21 --77.32 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --80.02 -11 -147.64 -21 --80.02 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --80.02 -11 -148.766504 -21 --79.433579 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --80.02 -11 -148.766504 -21 --80.606421 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --80.02 -11 -194.313496 -21 --79.433579 -0 -LINE -8 -Cmts -62 -1 -10 -195.44 -20 --80.02 -11 -194.313496 -21 --80.606421 -0 -TEXT -8 -Cmts -62 -1 -10 -128.64 -20 --109.43 -1 -38.000 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -128.64 -21 --109.43 -0 -LINE -8 -Cmts -62 -1 -10 -109.64 -20 --90.48 -11 -109.64 -21 --110.78 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --90.48 -11 -147.64 -21 --110.78 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --108.08 -11 -109.64 -21 --108.08 -0 -LINE -8 -Cmts -62 -1 -10 -109.64 -20 --108.08 -11 -110.766504 -21 --107.493579 -0 -LINE -8 -Cmts -62 -1 -10 -109.64 -20 --108.08 -11 -110.766504 -21 --108.666421 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --108.08 -11 -146.513496 -21 --107.493579 -0 -LINE -8 -Cmts -62 -1 -10 -147.64 -20 --108.08 -11 -146.513496 -21 --108.666421 -0 -TEXT -8 -Cmts -62 -1 -10 -197.96 -20 --99.88 -1 -0.800 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -197.96 -21 --99.88 -0 -LINE -8 -Cmts -62 -1 -10 -194.38 -20 --100.28 -11 -199.31 -21 --100.28 -0 -LINE -8 -Cmts -62 -1 -10 -194.38 -20 --99.48 -11 -199.31 -21 --99.48 -0 -LINE -8 -Cmts -62 -1 -10 -196.61 -20 --99.48 -11 -196.61 -21 --100.28 -0 -LINE -8 -Cmts -62 -1 -10 -196.61 -20 --100.28 -11 -196.023579 -21 --99.153496 -0 -LINE -8 -Cmts -62 -1 -10 -196.61 -20 --100.28 -11 -197.196421 -21 --99.153496 -0 -LINE -8 -Cmts -62 -1 -10 -196.61 -20 --99.48 -11 -196.023579 -21 --100.606504 -0 -LINE -8 -Cmts -62 -1 -10 -196.61 -20 --99.48 -11 -197.196421 -21 --100.606504 -0 -TEXT -8 -Cmts -62 -1 -10 -188.875133 -20 --92.417616 -1 -3.900 mm -40 -1.5 -41 -1.5 -50 -89.559272 -7 -SIMPLEX -72 -1 -73 -2 -11 -188.875133 -21 --92.417616 -0 -LINE -8 -Cmts -62 -1 -10 -191.77 -20 --94.39 -11 -187.510173 -21 --94.357232 -0 -LINE -8 -Cmts -62 -1 -10 -191.8 -20 --90.49 -11 -187.540173 -21 --90.457232 -0 -LINE -8 -Cmts -62 -1 -10 -190.240093 -20 --90.478001 -11 -190.210093 -21 --94.378001 -0 -LINE -8 -Cmts -62 -1 -10 -190.210093 -20 --94.378001 -11 -189.632355 -21 --93.24702 -0 -LINE -8 -Cmts -62 -1 -10 -190.210093 -20 --94.378001 -11 -190.805162 -21 --93.256041 -0 -LINE -8 -Cmts -62 -1 -10 -190.240093 -20 --90.478001 -11 -189.645024 -21 --91.599961 -0 -LINE -8 -Cmts -62 -1 -10 -190.240093 -20 --90.478001 -11 -190.817831 -21 --91.608982 -0 -TEXT -8 -Cmts -62 -1 -10 -159.664849 -20 --87.283312 -1 -6.400 mm -40 -1.5 -41 -1.5 -50 -270.089525 -7 -SIMPLEX -72 -1 -73 -2 -11 -159.664849 -21 --87.283312 -0 -LINE -8 -Cmts -62 -1 -10 -155.38 -20 --84.09 -11 -161.009848 -21 --84.081203 -0 -LINE -8 -Cmts -62 -1 -10 -155.39 -20 --90.49 -11 -161.019848 -21 --90.481203 -0 -LINE -8 -Cmts -62 -1 -10 -158.319851 -20 --90.485422 -11 -158.309851 -21 --84.085422 -0 -LINE -8 -Cmts -62 -1 -10 -158.309851 -20 --84.085422 -11 -158.898031 -21 --85.211008 -0 -LINE -8 -Cmts -62 -1 -10 -158.309851 -20 --84.085422 -11 -157.725191 -21 --85.212841 -0 -LINE -8 -Cmts -62 -1 -10 -158.319851 -20 --90.485422 -11 -158.904511 -21 --89.358003 -0 -LINE -8 -Cmts -62 -1 -10 -158.319851 -20 --90.485422 -11 -157.731671 -21 --89.359836 -0 -LINE -8 -Cmts -62 -1 -10 -109.67 -20 --90.4875 -11 -195.48 -21 --90.4875 -0 -TEXT -8 -Cmts -62 -1 -10 -147.64 -20 --117.98 -1 -88.300 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -147.64 -21 --117.98 -0 -LINE -8 -Cmts -62 -1 -10 -191.79 -20 --99.49 -11 -191.79 -21 --119.33 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --99.49 -11 -103.49 -21 --119.33 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --116.63 -11 -191.79 -21 --116.63 -0 -LINE -8 -Cmts -62 -1 -10 -191.79 -20 --116.63 -11 -190.663496 -21 --117.216421 -0 -LINE -8 -Cmts -62 -1 -10 -191.79 -20 --116.63 -11 -190.663496 -21 --116.043579 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --116.63 -11 -104.616504 -21 --117.216421 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --116.63 -11 -104.616504 -21 --116.043579 -0 -TEXT -8 -Cmts -62 -1 -10 -102.19 -20 --104.41 -1 -2.600 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -102.19 -21 --104.41 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --99.49 -11 -103.49 -21 --105.76 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --99.49 -11 -100.89 -21 --105.76 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --103.06 -11 -103.49 -21 --103.06 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --103.06 -11 -102.363496 -21 --103.646421 -0 -LINE -8 -Cmts -62 -1 -10 -103.49 -20 --103.06 -11 -102.363496 -21 --102.473579 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --103.06 -11 -102.016504 -21 --103.646421 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --103.06 -11 -102.016504 -21 --102.473579 -0 -TEXT -8 -Cmts -62 -1 -10 -97.67 -20 --96.94 -1 -5.100 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -97.67 -21 --96.94 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --99.49 -11 -96.32 -21 --99.49 -0 -LINE -8 -Cmts -62 -1 -10 -100.89 -20 --94.39 -11 -96.32 -21 --94.39 -0 -LINE -8 -Cmts -62 -1 -10 -99.02 -20 --94.39 -11 -99.02 -21 --99.49 -0 -LINE -8 -Cmts -62 -1 -10 -99.02 -20 --99.49 -11 -98.433579 -21 --98.363496 -0 -LINE -8 -Cmts -62 -1 -10 -99.02 -20 --99.49 -11 -99.606421 -21 --98.363496 -0 -LINE -8 -Cmts -62 -1 -10 -99.02 -20 --94.39 -11 -98.433579 -21 --95.516504 -0 -LINE -8 -Cmts -62 -1 -10 -99.02 -20 --94.39 -11 -99.606421 -21 --95.516504 -0 -TEXT -8 -Cmts -62 -1 -10 -109.63 -20 --81.13 -1 -14.500 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -109.63 -21 --81.13 -0 -LINE -8 -Cmts -62 -1 -10 -102.38 -20 --89.28 -11 -102.38 -21 --79.78 -0 -LINE -8 -Cmts -62 -1 -10 -116.88 -20 --89.28 -11 -116.88 -21 --79.78 -0 -LINE -8 -Cmts -62 -1 -10 -116.88 -20 --82.48 -11 -102.38 -21 --82.48 -0 -LINE -8 -Cmts -62 -1 -10 -102.38 -20 --82.48 -11 -103.506504 -21 --81.893579 -0 -LINE -8 -Cmts -62 -1 -10 -102.38 -20 --82.48 -11 -103.506504 -21 --83.066421 -0 -LINE -8 -Cmts -62 -1 -10 -116.88 -20 --82.48 -11 -115.753496 -21 --81.893579 -0 -LINE -8 -Cmts -62 -1 -10 -116.88 -20 --82.48 -11 -115.753496 -21 --83.066421 -0 -TEXT -8 -Cmts -62 -1 -10 -121.803009 -20 --90.50045 -1 -2.400 mm -40 -1.5 -41 -1.5 -50 -89.761269 -7 -SIMPLEX -72 -1 -73 -2 -11 -121.803009 -21 --90.50045 -0 -LINE -8 -Cmts -62 -1 -10 -116.89 -20 --91.68 -11 -123.147997 -21 --91.706075 -0 -LINE -8 -Cmts -62 -1 -10 -116.9 -20 --89.28 -11 -123.157997 -21 --89.306075 -0 -LINE -8 -Cmts -62 -1 -10 -120.458021 -20 --89.294825 -11 -120.448021 -21 --91.694825 -0 -LINE -8 -Cmts -62 -1 -10 -120.448021 -20 --91.694825 -11 -119.866299 -21 --90.565888 -0 -LINE -8 -Cmts -62 -1 -10 -120.448021 -20 --91.694825 -11 -121.03913 -21 --90.570774 -0 -LINE -8 -Cmts -62 -1 -10 -120.458021 -20 --89.294825 -11 -119.866912 -21 --90.418876 -0 -LINE -8 -Cmts -62 -1 -10 -120.458021 -20 --89.294825 -11 -121.039743 -21 --90.423762 -0 -TEXT -8 -Cmts -62 -1 -10 -115.69 -20 --85.3 -1 -2.400 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -115.69 -21 --85.3 -0 -LINE -8 -Cmts -62 -1 -10 -116.89 -20 --89.28 -11 -116.89 -21 --83.95 -0 -LINE -8 -Cmts -62 -1 -10 -114.49 -20 --89.28 -11 -114.49 -21 --83.95 -0 -LINE -8 -Cmts -62 -1 -10 -114.49 -20 --86.65 -11 -116.89 -21 --86.65 -0 -LINE -8 -Cmts -62 -1 -10 -116.89 -20 --86.65 -11 -115.763496 -21 --87.236421 -0 -LINE -8 -Cmts -62 -1 -10 -116.89 -20 --86.65 -11 -115.763496 -21 --86.063579 -0 -LINE -8 -Cmts -62 -1 -10 -114.49 -20 --86.65 -11 -115.616504 -21 --87.236421 -0 -LINE -8 -Cmts -62 -1 -10 -114.49 -20 --86.65 -11 -115.616504 -21 --86.063579 -0 -TEXT -8 -Cmts -62 -1 -10 -135.19 -20 --90.49 -1 -12.800 mm -40 -1.5 -41 -1.5 -50 -270.0 -7 -SIMPLEX -72 -1 -73 -2 -11 -135.19 -21 --90.49 -0 -LINE -8 -Cmts -62 -1 -10 -139.89 -20 --96.89 -11 -133.84 -21 --96.89 -0 -LINE -8 -Cmts -62 -1 -10 -139.89 -20 --84.09 -11 -133.84 -21 --84.09 -0 -LINE -8 -Cmts -62 -1 -10 -136.54 -20 --84.09 -11 -136.54 -21 --96.89 -0 -LINE -8 -Cmts -62 -1 -10 -136.54 -20 --96.89 -11 -135.953579 -21 --95.763496 -0 -LINE -8 -Cmts -62 -1 -10 -136.54 -20 --96.89 -11 -137.126421 -21 --95.763496 -0 -LINE -8 -Cmts -62 -1 -10 -136.54 -20 --84.09 -11 -135.953579 -21 --85.216504 -0 -LINE -8 -Cmts -62 -1 -10 -136.54 -20 --84.09 -11 -137.126421 -21 --85.216504 -0 -TEXT -8 -Cmts -62 -1 -10 -147.63 -20 --105.02 -1 -15.500 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -147.63 -21 --105.02 -0 -LINE -8 -Cmts -62 -1 -10 -139.88 -20 --96.87 -11 -139.88 -21 --106.37 -0 -LINE -8 -Cmts -62 -1 -10 -155.38 -20 --96.87 -11 -155.38 -21 --106.37 -0 -LINE -8 -Cmts -62 -1 -10 -155.38 -20 --103.67 -11 -139.88 -21 --103.67 -0 -LINE -8 -Cmts -62 -1 -10 -139.88 -20 --103.67 -11 -141.006504 -21 --103.083579 -0 -LINE -8 -Cmts -62 -1 -10 -139.88 -20 --103.67 -11 -141.006504 -21 --104.256421 -0 -LINE -8 -Cmts -62 -1 -10 -155.38 -20 --103.67 -11 -154.253496 -21 --103.083579 -0 -LINE -8 -Cmts -62 -1 -10 -155.38 -20 --103.67 -11 -154.253496 -21 --104.256421 -0 -CIRCLE -8 -0 -10 -30.75 -20 --33.3375 -40 -3.15 -0 -CIRCLE -8 -0 -10 -195.4375 -20 --90.4875 -40 -3.15 -0 -CIRCLE -8 -0 -10 -264.525 -20 --33.3375 -40 -3.15 -0 -LINE -8 -0 -10 -290.1375 -20 --7.7875 -11 -290.1375 -21 --58.7125 -0 -LINE -8 -0 -10 -288.3375 -20 --58.7125 -11 -290.1375 -21 --58.7125 -0 -LINE -8 -0 -10 -5.1375 -20 --65.0125 -11 -5.1375 -21 --97.7875 -0 -LINE -8 -0 -10 -288.3375 -20 --65.1125 -11 -290.1375 -21 --65.1125 -0 -LINE -8 -0 -10 -8.7375 -20 --65.0125 -11 -5.1375 -21 --65.0125 -0 -LINE -8 -0 -10 -8.7375 -20 --58.8125 -11 -5.1375 -21 --58.8125 -0 -ARC -8 -0 -10 -8.7375 -20 --61.9125 -30 -0.0 -40 -3.1 -50 --90.0 -51 -90.0 -0 -ARC -8 -0 -10 -288.3375 -20 --61.9125 -30 -0.0 -40 -3.2 -50 -90.0 -51 -270.0 -0 -TEXT -8 -Cmts -62 -1 -10 -277.6375 -20 -6.3625 -1 -25.000 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -277.6375 -21 -6.3625 -0 -LINE -8 -Cmts -62 -1 -10 -265.1375 -20 --33.3375 -11 -265.1375 -21 -7.7125 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 --33.3375 -11 -290.1375 -21 -7.7125 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 -5.0125 -11 -265.1375 -21 -5.0125 -0 -LINE -8 -Cmts -62 -1 -10 -265.1375 -20 -5.0125 -11 -266.264004 -21 -5.598921 -0 -LINE -8 -Cmts -62 -1 -10 -265.1375 -20 -5.0125 -11 -266.264004 -21 -4.426079 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 -5.0125 -11 -289.010996 -21 -5.598921 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 -5.0125 -11 -289.010996 -21 -4.426079 -0 -TEXT -8 -Cmts -62 -1 -10 -147.6375 -20 -10.875 -1 -285.000 mm -40 -1.5 -41 -1.5 -7 -SIMPLEX -72 -1 -73 -2 -11 -147.6375 -21 -10.875 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 --7.14375 -11 -290.1375 -21 -12.225 -0 -LINE -8 -Cmts -62 -1 -10 -5.1375 -20 --7.14375 -11 -5.1375 -21 -12.225 -0 -LINE -8 -Cmts -62 -1 -10 -5.1375 -20 -9.525 -11 -290.1375 -21 -9.525 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 -9.525 -11 -289.010996 -21 -8.938579 -0 -LINE -8 -Cmts -62 -1 -10 -290.1375 -20 -9.525 -11 -289.010996 -21 -10.111421 -0 -LINE -8 -Cmts -62 -1 -10 -5.1375 -20 -9.525 -11 -6.264004 -21 -8.938579 -0 -LINE -8 -Cmts -62 -1 -10 -5.1375 -20 -9.525 -11 -6.264004 -21 -10.111421 -0 -ARC -8 -0 -10 -7.6375 -20 --97.7875 -30 -0.0 -40 -2.5 -50 --180.0 -51 --90.0 -0 -ARC -8 -0 -10 -287.6375 -20 --97.7875 -30 -0.0 -40 -2.5 -50 --90.0 -51 -0.0 -0 -ARC -8 -0 -10 -287.6375 -20 --7.7875 -30 -0.0 -40 -2.5 -50 -0.0 -51 -90.0 -0 -ARC -8 -0 -10 -7.6375 -20 --7.7875 -30 -0.0 -40 -2.5 -50 -90.0 -51 -180.0 -0 -LINE -8 -0 -10 -290.1375 -20 --97.7875 -11 -290.1375 -21 --65.1125 -0 -LINE -8 -0 -10 -7.6375 -20 --100.2875 -11 -287.6375 -21 --100.2875 -0 -LINE -8 -0 -10 -5.1375 -20 --7.7875 -11 -5.1375 -21 --58.8125 -0 -LINE -8 -0 -10 -7.6375 -20 --5.2875 -11 -287.6375 -21 --5.2875 -0 -ENDSEC -0 -EOF \ No newline at end of file diff --git a/keyboards/weebkeeb/config.h b/keyboards/weebkeeb/config.h deleted file mode 100644 index 859adc9cc2..0000000000 --- a/keyboards/weebkeeb/config.h +++ /dev/null @@ -1,162 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER You -#define PRODUCT weebkeeb -#define DESCRIPTION A custom keyboard - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { F4, F5, F6, F7 } -#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7, C6, C7, F0, F1 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/weebkeeb/keymaps/default/Makefile b/keyboards/weebkeeb/keymaps/default/Makefile deleted file mode 100644 index f4671a9d11..0000000000 --- a/keyboards/weebkeeb/keymaps/default/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - -ifndef QUANTUM_DIR - include ../../../../Makefile -endif \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/config.h b/keyboards/weebkeeb/keymaps/default/config.h deleted file mode 100644 index df06a26206..0000000000 --- a/keyboards/weebkeeb/keymaps/default/config.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -// place overrides here - -#endif \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/keymap.c b/keyboards/weebkeeb/keymaps/default/keymap.c deleted file mode 100644 index cdf1f1e4c7..0000000000 --- a/keyboards/weebkeeb/keymaps/default/keymap.c +++ /dev/null @@ -1,119 +0,0 @@ -#include "weebkeeb.h" - -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, - ADJUST, -}; - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | S | D | F | G | H | J | K | L | ; | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[_QWERTY] = KEYMAP( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - KC_LCTL, ADJUST, KC_LALT, KC_LGUI, MO(3), KC_SPC, KC_SPC, MO(4), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ -), - -/* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ -[3] = KEYMAP( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ - _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), -[4] = KEYMAP( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ - _______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), - -/* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ -[_ADJUST] = KEYMAP( \ - _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ - _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ - _______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ -) -}; -const uint16_t PROGMEM fn_actions[] = { - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; - - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} \ No newline at end of file diff --git a/keyboards/weebkeeb/keymaps/default/readme.md b/keyboards/weebkeeb/keymaps/default/readme.md deleted file mode 100644 index 8771322763..0000000000 --- a/keyboards/weebkeeb/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for weebkeeb \ No newline at end of file diff --git a/keyboards/weebkeeb/readme.md b/keyboards/weebkeeb/readme.md deleted file mode 100644 index bf31016c82..0000000000 --- a/keyboards/weebkeeb/readme.md +++ /dev/null @@ -1,28 +0,0 @@ -weebkeeb keyboard firmware -====================== - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent readme](/). - -## Building - -Download or clone the whole firmware and navigate to the keyboards/weebkeeb folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: - -``` -$ make [default|jack|] -``` - -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/weebkeeb/rules.mk b/keyboards/weebkeeb/rules.mk deleted file mode 100644 index 55898147dd..0000000000 --- a/keyboards/weebkeeb/rules.mk +++ /dev/null @@ -1,67 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/weebkeeb/weebkeeb.c b/keyboards/weebkeeb/weebkeeb.c deleted file mode 100644 index 483fc9440e..0000000000 --- a/keyboards/weebkeeb/weebkeeb.c +++ /dev/null @@ -1,28 +0,0 @@ -#include "weebkeeb.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} diff --git a/keyboards/weebkeeb/weebkeeb.h b/keyboards/weebkeeb/weebkeeb.h deleted file mode 100644 index 7bca2c2014..0000000000 --- a/keyboards/weebkeeb/weebkeeb.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef WEEBKEEB_H -#define WEEBKEEB_H - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ -} - -#endif From 0f71c81df833a282250ecc4e66034320e40b208e Mon Sep 17 00:00:00 2001 From: climbalima Date: Sat, 3 Dec 2016 17:37:41 -0500 Subject: [PATCH 110/124] having trouble with conflicts --- keyboards/maxipad/config.h | 15 --------------- keyboards/maxipad/readme.md | 2 -- keyboards/maxipad/rules.mk | 3 --- 3 files changed, 20 deletions(-) diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index 4377a892e9..d7a5ef5646 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -32,20 +32,6 @@ along with this program. If not, see . #define MATRIX_ROWS 5 #define MATRIX_COLS 6 -<<<<<<< HEAD -// Planck PCB default pin-out -// Change this to how you wired your keyboard -// COLS: Left to right, ROWS: Top to bottom -#ifdef USE_PRO_MICRO - #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } - #define MATRIX_COL_PINS { F4, C6, D7, F5, B4, B5 } - #define UNUSED_PINS - #else - #define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } - #define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } - #define UNUSED_PINS - #endif -======= /* * Keyboard Matrix Assignments * @@ -65,7 +51,6 @@ along with this program. If not, see . //#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } //#define UNUSED_PINS ->>>>>>> 102a830bbdb302eb0951ec7910ab7c9feae272d1 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/maxipad/readme.md b/keyboards/maxipad/readme.md index 58ed5d718f..861ea2b078 100644 --- a/keyboards/maxipad/readme.md +++ b/keyboards/maxipad/readme.md @@ -1,6 +1,4 @@ -<<<<<<< HEAD Maxipad keyboard firmware -====================== ## Quantum MK Firmware diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 49bb5f0022..a5c7391523 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -59,7 +59,6 @@ EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= yes # Console for debug(+400) COMMAND_ENABLE ?= yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -<<<<<<< HEAD # SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend # NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality @@ -67,7 +66,6 @@ COMMAND_ENABLE ?= yes # Commands for debug and configuration # UNICODE_ENABLE ?= YES # Unicode # BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID USE_PRO_MICRO ?= yes -======= SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE ?= no # USB Nkey Rollover @@ -76,4 +74,3 @@ MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE ?= no # Audio output on port C6 ->>>>>>> 102a830bbdb302eb0951ec7910ab7c9feae272d1 From 75b18773bd9368ad53d7072d73a6280e053123a3 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sun, 4 Dec 2016 14:51:27 +0700 Subject: [PATCH 111/124] fix RGB LED order --- keyboards/handwired/promethium/promethium.h | 108 ++++++++++---------- 1 file changed, 54 insertions(+), 54 deletions(-) diff --git a/keyboards/handwired/promethium/promethium.h b/keyboards/handwired/promethium/promethium.h index 8f2a8c3be2..662eeab990 100644 --- a/keyboards/handwired/promethium/promethium.h +++ b/keyboards/handwired/promethium/promethium.h @@ -23,77 +23,77 @@ } enum led_sequence { - LED_IND_EMOJI, - LED_IND_NUM, - LED_IND_FUNC, - - LED_IND_BATTERY, - LED_IND_USB, LED_IND_BLUETOOTH, + LED_IND_USB, + LED_IND_BATTERY, - LED_TAB, - LED_ESC, - LED_LSFT, - LED_LCTL, - - LED_LGUI, - LED_Z, - LED_A, - LED_Q, + LED_IND_FUNC, + LED_IND_NUM, + LED_IND_EMOJI, - LED_W, - LED_S, - LED_X, - LED_LALT, + LED_BKSP, + LED_ENT, + LED_RSFT, + LED_RCTL, - LED_PUNC, - LED_C, - LED_D, - LED_E, + LED_RGUI, + LED_SLSH, + LED_SCLN, + LED_P, - LED_R, - LED_F, - LED_V, - LED_NUM, + LED_O, + LED_L, + LED_DOT, + LED_RALT, - LED_LSPC, - LED_B, - LED_G, - LED_T, + LED_EMOJI, + LED_COMM, + LED_K, + LED_I, - LED_TRACKPOINT1, - LED_TRACKPOINT2, - LED_TRACKPOINT3, + LED_U, + LED_J, + LED_M, + LED_FUNC, LED_RSPC, LED_N, LED_HH, LED_Y, - LED_U, - LED_J, - LED_M, - LED_FUNC, + LED_TRACKPOINT3, + LED_TRACKPOINT2, + LED_TRACKPOINT1, - LED_EMOJI, - LED_COMM, - LED_K, - LED_I, + LED_LSPC, + LED_B, + LED_G, + LED_T, - LED_O, - LED_L, - LED_DOT, - LED_RALT, + LED_R, + LED_F, + LED_V, + LED_NUM, - LED_RGUI, - LED_SLSH, - LED_SCLN, - LED_P, + LED_PUNC, + LED_C, + LED_D, + LED_E, - LED_BKSP, - LED_ENT, - LED_RSFT, - LED_RCTL + LED_W, + LED_S, + LED_X, + LED_LALT, + + LED_LGUI, + LED_Z, + LED_A, + LED_Q, + + LED_TAB, + LED_ESC, + LED_LSFT, + LED_LCTL, }; #endif From a8e5f6180585f46684d713976ad05d4d81b11ab1 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Sun, 4 Dec 2016 23:55:06 +0700 Subject: [PATCH 112/124] fix emoji LED indicators. --- .../promethium/keymaps/priyadi/keymap.c | 48 +++++++++++-------- 1 file changed, 28 insertions(+), 20 deletions(-) diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c index b2da2f97b7..3d34e98229 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c +++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c @@ -282,25 +282,25 @@ void led_layer_func(void) { rgbsps_set(LED_K, 15, 0, 15); rgbsps_set(LED_L, 15, 0, 15); - rgbsps_set(LED_U, 15, 0, 10); - rgbsps_set(LED_O, 15, 0, 10); - rgbsps_set(LED_COMM, 15, 0, 10); - rgbsps_set(LED_DOT, 15, 0, 10); - rgbsps_set(LED_SCLN, 15, 0, 10); - rgbsps_set(LED_P, 15, 0, 10); - - rgbsps_set(LED_Q, 10, 0, 15); - rgbsps_set(LED_W, 10, 0, 15); - rgbsps_set(LED_E, 10, 0, 15); - rgbsps_set(LED_R, 10, 0, 15); - rgbsps_set(LED_A, 10, 0, 15); - rgbsps_set(LED_S, 10, 0, 15); - rgbsps_set(LED_D, 10, 0, 15); - rgbsps_set(LED_F, 10, 0, 15); - rgbsps_set(LED_Z, 10, 0, 15); - rgbsps_set(LED_X, 10, 0, 15); - rgbsps_set(LED_C, 10, 0, 15); - rgbsps_set(LED_V, 10, 0, 15); + rgbsps_set(LED_U, 15, 0, 0); + rgbsps_set(LED_O, 15, 0, 0); + rgbsps_set(LED_COMM, 15, 0, 0); + rgbsps_set(LED_DOT, 15, 0, 0); + rgbsps_set(LED_SCLN, 15, 0, 0); + rgbsps_set(LED_P, 15, 0, 0); + + rgbsps_set(LED_Q, 0, 15, 0); + rgbsps_set(LED_W, 0, 15, 0); + rgbsps_set(LED_E, 0, 15, 0); + rgbsps_set(LED_R, 0, 15, 0); + rgbsps_set(LED_A, 0, 15, 0); + rgbsps_set(LED_S, 0, 15, 0); + rgbsps_set(LED_D, 0, 15, 0); + rgbsps_set(LED_F, 0, 15, 0); + rgbsps_set(LED_Z, 0, 15, 0); + rgbsps_set(LED_X, 0, 15, 0); + rgbsps_set(LED_C, 0, 15, 0); + rgbsps_set(LED_V, 0, 15, 0); rgbsps_send(); } @@ -361,7 +361,15 @@ void led_layer_num(void) { } void led_layer_emoji(void) { - rgbsps_setall(15, 15, 0); + for(uint8_t i = 0; i < COUNT(LED_ALNUM); i++) { + rgbsps_set(pgm_read_byte(&LED_ALNUM[i]), 15, 15, 0); + } + for(uint8_t i = 0; i < COUNT(LED_MODS); i++) { + rgbsps_set(pgm_read_byte(&LED_MODS[i]), 15, 15, 0); + } + for(uint8_t i = 0; i < COUNT(LED_FN); i++) { + rgbsps_set(pgm_read_byte(&LED_FN[i]), 15, 15, 0); + } rgbsps_set(LED_IND_FUNC, 0, 0, 0); rgbsps_set(LED_IND_NUM, 0, 0, 0); From 6ef3060b4292392be1455c26d260e819f7d12ef0 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Mon, 5 Dec 2016 01:07:12 +0700 Subject: [PATCH 113/124] Implemented weak ps2_mouse_init_user() There are a lot of PS/2 commands, some are vendor/device specific, so we provide a weak ps2_mouse_init_user() to be implemented in each keyboard that need it. --- tmk_core/protocol/ps2_mouse.c | 54 +++++------------------------------ tmk_core/protocol/ps2_mouse.h | 49 +++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 47 deletions(-) diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index af971dd497..e3c6974440 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -28,53 +28,7 @@ along with this program. If not, see . /* ============================= MACROS ============================ */ -#define PS2_MOUSE_SEND(command, message) \ -do { \ - uint8_t rcv = ps2_host_send(command); \ - if (debug_mouse) { \ - print((message)); \ - xprintf(" command: %X, result: %X, error: %X \n", command, rcv, ps2_error); \ - } \ -} while(0) - -#define PS2_MOUSE_SEND_SAFE(command, message) \ -do { \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_disable_data_reporting(); \ - } \ - PS2_MOUSE_SEND(command, message); \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_enable_data_reporting(); \ - } \ -} while(0) - -#define PS2_MOUSE_SET_SAFE(command, value, message) \ -do { \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_disable_data_reporting(); \ - } \ - PS2_MOUSE_SEND(command, message); \ - PS2_MOUSE_SEND(value, "Sending value"); \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_enable_data_reporting(); \ - } \ -} while(0) - -#define PS2_MOUSE_RECEIVE(message) \ -do { \ - uint8_t rcv = ps2_host_recv_response(); \ - if (debug_mouse) { \ - print((message)); \ - xprintf(" result: %X, error: %X \n", rcv, ps2_error); \ - } \ -} while(0) - -static enum ps2_mouse_mode_e { - PS2_MOUSE_STREAM_MODE, - PS2_MOUSE_REMOTE_MODE, -} ps2_mouse_mode = PS2_MOUSE_STREAM_MODE; - -static report_mouse_t mouse_report = {}; +static report_mouse_t mouse_report = {};./ static inline void ps2_mouse_print_report(report_mouse_t *mouse_report); static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report); @@ -108,6 +62,12 @@ void ps2_mouse_init(void) { #ifdef PS2_MOUSE_USE_2_1_SCALING ps2_mouse_set_scaling_2_1(); #endif + + ps2_mouse_init_user(); +} + +__attribute__((weak)) +void ps2_mouse_init_user(void) { } void ps2_mouse_task(void) { diff --git a/tmk_core/protocol/ps2_mouse.h b/tmk_core/protocol/ps2_mouse.h index e11c705fc6..3c93a46342 100644 --- a/tmk_core/protocol/ps2_mouse.h +++ b/tmk_core/protocol/ps2_mouse.h @@ -19,6 +19,53 @@ along with this program. If not, see . #define PS2_MOUSE_H #include +#include "debug.h" + +#define PS2_MOUSE_SEND(command, message) \ +do { \ + uint8_t rcv = ps2_host_send(command); \ + if (debug_mouse) { \ + print((message)); \ + xprintf(" command: %X, result: %X, error: %X \n", command, rcv, ps2_error); \ + } \ +} while(0) + +#define PS2_MOUSE_SEND_SAFE(command, message) \ +do { \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_disable_data_reporting(); \ + } \ + PS2_MOUSE_SEND(command, message); \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_enable_data_reporting(); \ + } \ +} while(0) + +#define PS2_MOUSE_SET_SAFE(command, value, message) \ +do { \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_disable_data_reporting(); \ + } \ + PS2_MOUSE_SEND(command, message); \ + PS2_MOUSE_SEND(value, "Sending value"); \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_enable_data_reporting(); \ + } \ +} while(0) + +#define PS2_MOUSE_RECEIVE(message) \ +do { \ + uint8_t rcv = ps2_host_recv_response(); \ + if (debug_mouse) { \ + print((message)); \ + xprintf(" result: %X, error: %X \n", rcv, ps2_error); \ + } \ +} while(0) + +static enum ps2_mouse_mode_e { + PS2_MOUSE_STREAM_MODE, + PS2_MOUSE_REMOTE_MODE, +} ps2_mouse_mode = PS2_MOUSE_STREAM_MODE; /* * Data format: @@ -107,6 +154,8 @@ typedef enum ps2_mouse_sample_rate_e { void ps2_mouse_init(void); +void ps2_mouse_init_user(void); + void ps2_mouse_task(void); void ps2_mouse_disable_data_reporting(void); From 73073f270b55d939559e8cfd4a7d36e3510ba2f6 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Mon, 5 Dec 2016 01:15:04 +0700 Subject: [PATCH 114/124] Trackpoint initialization --- .../promethium/keymaps/priyadi/flash.sh | 1 + .../promethium/keymaps/priyadi/keymap.c | 110 +++++++++++++++++- 2 files changed, 110 insertions(+), 1 deletion(-) diff --git a/keyboards/handwired/promethium/keymaps/priyadi/flash.sh b/keyboards/handwired/promethium/keymaps/priyadi/flash.sh index fb81a54ee0..14a3b43789 100755 --- a/keyboards/handwired/promethium/keymaps/priyadi/flash.sh +++ b/keyboards/handwired/promethium/keymaps/priyadi/flash.sh @@ -1,3 +1,4 @@ #!/bin/sh +sleep 10 avrdude -p m32u4 -P /dev/ttyACM0 -c avr109 -U flash:w:../../../../../.build/handwired_promethium_priyadi.hex diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c index 3d34e98229..bf797a7491 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c +++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c @@ -11,6 +11,8 @@ #include "process_unicode.h" #include "quantum.h" #include "rgbsps.h" +#include "ps2_mouse.h" +#include "ps2.h" #define COUNT(x) (sizeof (x) / sizeof (*(x))) // #define RGBLED_NUM 5 @@ -730,4 +732,110 @@ void shutdown_user() stop_all_notes(); } -#endif \ No newline at end of file +#endif + + +void ps2_mouse_init_user() { + // set TrackPoint sensitivity + PS2_MOUSE_SEND(0xE2, "set trackpoint sensitivity: 0xE2"); + PS2_MOUSE_SEND(0x81, "set trackpoint sensitivity: 0x81"); + PS2_MOUSE_SEND(0x4A, "set trackpoint sensitivity: 0x4A"); + PS2_MOUSE_SEND(0x60, "set trackpoint sensitivity: 0x60"); + + // set TrackPoint speed + // (transfer function upper plateau speed) + PS2_MOUSE_SEND(0xE2, "set trackpoint speed: 0xE2"); + PS2_MOUSE_SEND(0x81, "set trackpoint speed: 0x81"); + PS2_MOUSE_SEND(0x60, "set trackpoint speed: 0x60"); + PS2_MOUSE_SEND(0x90, "set trackpoint speed: 0x90"); + + // set TrackPoint Negative Inertia factor + PS2_MOUSE_SEND(0xE2, "set negative inertia factor: 0xE2"); + PS2_MOUSE_SEND(0x81, "set negative inertia factor: 0x81"); + PS2_MOUSE_SEND(0x4D, "set negative inertia factor: 0x4D"); + PS2_MOUSE_SEND(0x03, "set negative inertia factor: 0x03"); + + // disable up threshold (click) + PS2_MOUSE_SEND(0xE2, "set disable up threshold: 0xE2"); + PS2_MOUSE_SEND(0x47, "set disable up threshold: 0x47"); + PS2_MOUSE_SEND(0x2C, "set disable up threshold: 0x2C"); + PS2_MOUSE_SEND(0x01, "set disable up threshold: 0x01"); + + // enable TrackPoint Press to Select (PtS) + // print("ps2_mouse_init: send 0xE2: "); + // rcv = ps2_host_send(0xE2); + // phex(rcv); phex(ps2_error); print("\n"); + // print("ps2_mouse_init: send 0x47: "); + // rcv = ps2_host_send(0x47); + // phex(rcv); phex(ps2_error); print("\n"); + // print("ps2_mouse_init: send 0x2C: "); + // rcv = ps2_host_send(0x2C); + // phex(rcv); phex(ps2_error); print("\n"); + // print("ps2_mouse_init: send 0x00: "); + // rcv = ps2_host_send(0x00); + // phex(rcv); phex(ps2_error); print("\n"); + + // set TrackPoint Press to Select threshold + // print("ps2_mouse_init: send 0xE2: "); + // rcv = ps2_host_send(0xE2); + // phex(rcv); phex(ps2_error); print("\n"); + // print("ps2_mouse_init: send 0x81: "); + // rcv = ps2_host_send(0x81); + // phex(rcv); phex(ps2_error); print("\n"); + // print("ps2_mouse_init: send 0x5C: "); + // rcv = ps2_host_send(0x5C); + // phex(rcv); phex(ps2_error); print("\n"); + // // default PtS threshold is 0x08 + // print("ps2_mouse_init: send 0x04: "); + // rcv = ps2_host_send(0x04); + // phex(rcv); phex(ps2_error); print("\n"); + + // set TrackPoint Press to Select time constant (zTc) + // print("ps2_mouse_init: send 0xE2: "); + // rcv = ps2_host_send(0xE2); + // phex(rcv); phex(ps2_error); print("\n"); + // print("ps2_mouse_init: send 0x81: "); + // rcv = ps2_host_send(0x81); + // phex(rcv); phex(ps2_error); print("\n"); + // print("ps2_mouse_init: send 0x5E: "); + // rcv = ps2_host_send(0x5E); + // phex(rcv); phex(ps2_error); print("\n"); + // // default zTc is 0x26 + // print("ps2_mouse_init: send 0x45: "); + // rcv = ps2_host_send(0x45); + // phex(rcv); phex(ps2_error); print("\n"); + + /* + // set TrackPoint Press to Select Jenks Curvature (jkcur) + print("ps2_mouse_init: send 0xE2: "); + rcv = ps2_host_send(0xE2); + phex(rcv); phex(ps2_error); print("\n"); + print("ps2_mouse_init: send 0x81: "); + rcv = ps2_host_send(0x81); + phex(rcv); phex(ps2_error); print("\n"); + print("ps2_mouse_init: send 0x5D: "); + rcv = ps2_host_send(0x5D); + phex(rcv); phex(ps2_error); print("\n"); + // default jkcur is 0x87 + print("ps2_mouse_init: send 0x87: "); + rcv = ps2_host_send(0x87); + phex(rcv); phex(ps2_error); print("\n"); + */ + + /* + // set TrackPoint Minimum Drag (mindrag) + print("ps2_mouse_init: send 0xE2: "); + rcv = ps2_host_send(0xE2); + phex(rcv); phex(ps2_error); print("\n"); + print("ps2_mouse_init: send 0x81: "); + rcv = ps2_host_send(0x81); + phex(rcv); phex(ps2_error); print("\n"); + print("ps2_mouse_init: send 0x59: "); + rcv = ps2_host_send(0x59); + phex(rcv); phex(ps2_error); print("\n"); + // default PtS mindrag is 0x14 + print("ps2_mouse_init: send 0x14: "); + rcv = ps2_host_send(0x14); + phex(rcv); phex(ps2_error); print("\n"); + */ +} \ No newline at end of file From d059624bfb32e268ff0972609d7eadbb212fa2d2 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Mon, 5 Dec 2016 01:07:12 +0700 Subject: [PATCH 115/124] Implemented weak ps2_mouse_init_user() There are a lot of PS/2 commands, some are vendor/device specific, so we provide a weak ps2_mouse_init_user() to be implemented in each keyboard that need it. --- tmk_core/protocol/ps2_mouse.c | 54 +++++------------------------------ tmk_core/protocol/ps2_mouse.h | 49 +++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 47 deletions(-) diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index af971dd497..e3c6974440 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -28,53 +28,7 @@ along with this program. If not, see . /* ============================= MACROS ============================ */ -#define PS2_MOUSE_SEND(command, message) \ -do { \ - uint8_t rcv = ps2_host_send(command); \ - if (debug_mouse) { \ - print((message)); \ - xprintf(" command: %X, result: %X, error: %X \n", command, rcv, ps2_error); \ - } \ -} while(0) - -#define PS2_MOUSE_SEND_SAFE(command, message) \ -do { \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_disable_data_reporting(); \ - } \ - PS2_MOUSE_SEND(command, message); \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_enable_data_reporting(); \ - } \ -} while(0) - -#define PS2_MOUSE_SET_SAFE(command, value, message) \ -do { \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_disable_data_reporting(); \ - } \ - PS2_MOUSE_SEND(command, message); \ - PS2_MOUSE_SEND(value, "Sending value"); \ - if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ - ps2_mouse_enable_data_reporting(); \ - } \ -} while(0) - -#define PS2_MOUSE_RECEIVE(message) \ -do { \ - uint8_t rcv = ps2_host_recv_response(); \ - if (debug_mouse) { \ - print((message)); \ - xprintf(" result: %X, error: %X \n", rcv, ps2_error); \ - } \ -} while(0) - -static enum ps2_mouse_mode_e { - PS2_MOUSE_STREAM_MODE, - PS2_MOUSE_REMOTE_MODE, -} ps2_mouse_mode = PS2_MOUSE_STREAM_MODE; - -static report_mouse_t mouse_report = {}; +static report_mouse_t mouse_report = {};./ static inline void ps2_mouse_print_report(report_mouse_t *mouse_report); static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report); @@ -108,6 +62,12 @@ void ps2_mouse_init(void) { #ifdef PS2_MOUSE_USE_2_1_SCALING ps2_mouse_set_scaling_2_1(); #endif + + ps2_mouse_init_user(); +} + +__attribute__((weak)) +void ps2_mouse_init_user(void) { } void ps2_mouse_task(void) { diff --git a/tmk_core/protocol/ps2_mouse.h b/tmk_core/protocol/ps2_mouse.h index e11c705fc6..3c93a46342 100644 --- a/tmk_core/protocol/ps2_mouse.h +++ b/tmk_core/protocol/ps2_mouse.h @@ -19,6 +19,53 @@ along with this program. If not, see . #define PS2_MOUSE_H #include +#include "debug.h" + +#define PS2_MOUSE_SEND(command, message) \ +do { \ + uint8_t rcv = ps2_host_send(command); \ + if (debug_mouse) { \ + print((message)); \ + xprintf(" command: %X, result: %X, error: %X \n", command, rcv, ps2_error); \ + } \ +} while(0) + +#define PS2_MOUSE_SEND_SAFE(command, message) \ +do { \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_disable_data_reporting(); \ + } \ + PS2_MOUSE_SEND(command, message); \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_enable_data_reporting(); \ + } \ +} while(0) + +#define PS2_MOUSE_SET_SAFE(command, value, message) \ +do { \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_disable_data_reporting(); \ + } \ + PS2_MOUSE_SEND(command, message); \ + PS2_MOUSE_SEND(value, "Sending value"); \ + if (PS2_MOUSE_STREAM_MODE == ps2_mouse_mode) { \ + ps2_mouse_enable_data_reporting(); \ + } \ +} while(0) + +#define PS2_MOUSE_RECEIVE(message) \ +do { \ + uint8_t rcv = ps2_host_recv_response(); \ + if (debug_mouse) { \ + print((message)); \ + xprintf(" result: %X, error: %X \n", rcv, ps2_error); \ + } \ +} while(0) + +static enum ps2_mouse_mode_e { + PS2_MOUSE_STREAM_MODE, + PS2_MOUSE_REMOTE_MODE, +} ps2_mouse_mode = PS2_MOUSE_STREAM_MODE; /* * Data format: @@ -107,6 +154,8 @@ typedef enum ps2_mouse_sample_rate_e { void ps2_mouse_init(void); +void ps2_mouse_init_user(void); + void ps2_mouse_task(void); void ps2_mouse_disable_data_reporting(void); From 07d29b7d29ce13a22f50270ab54d39f80103cc44 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Mon, 5 Dec 2016 01:22:40 +0700 Subject: [PATCH 116/124] syntax error fix --- tmk_core/protocol/ps2_mouse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index e3c6974440..d9ccbecb43 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -28,7 +28,7 @@ along with this program. If not, see . /* ============================= MACROS ============================ */ -static report_mouse_t mouse_report = {};./ +static report_mouse_t mouse_report = {}; static inline void ps2_mouse_print_report(report_mouse_t *mouse_report); static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report); From 236c0408596e525c949abc5a3b3ef8b853c28504 Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Mon, 5 Dec 2016 01:22:40 +0700 Subject: [PATCH 117/124] syntax error fix --- tmk_core/protocol/ps2_mouse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index e3c6974440..d9ccbecb43 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -28,7 +28,7 @@ along with this program. If not, see . /* ============================= MACROS ============================ */ -static report_mouse_t mouse_report = {};./ +static report_mouse_t mouse_report = {}; static inline void ps2_mouse_print_report(report_mouse_t *mouse_report); static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report); From c7d11fd001cac4f0baeecdda79b7743e3695c77f Mon Sep 17 00:00:00 2001 From: Priyadi Iman Nurcahyo Date: Mon, 5 Dec 2016 02:15:38 +0700 Subject: [PATCH 118/124] Remove unnecessary build options --- keyboards/handwired/promethium/keymaps/priyadi/Makefile | 7 ++++--- keyboards/handwired/promethium/rules.mk | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/keyboards/handwired/promethium/keymaps/priyadi/Makefile b/keyboards/handwired/promethium/keymaps/priyadi/Makefile index 2f6f27a732..46fdfa0118 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/Makefile +++ b/keyboards/handwired/promethium/keymaps/priyadi/Makefile @@ -4,16 +4,17 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode +UNICODEMAP_ENABLE = yes BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. PS2_MOUSE_ENABLE = yes diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk index 0842780cce..891f523c22 100644 --- a/keyboards/handwired/promethium/rules.mk +++ b/keyboards/handwired/promethium/rules.mk @@ -61,7 +61,7 @@ BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality MIDI_ENABLE ?= no # MIDI controls AUDIO_ENABLE ?= no # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode -UNICODEMAP_ENABLE = yes +UNICODEMAP_ENABLE ?= yes BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. PS2_MOUSE_ENABLE ?= yes From 7e4341e437c2f0d8d4257b616b1d8d30a8cab4ed Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sun, 4 Dec 2016 23:01:07 -0500 Subject: [PATCH 119/124] Update rules.mk --- keyboards/planck/rules.mk | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk index 4874d92b9f..fb24e82354 100644 --- a/keyboards/planck/rules.mk +++ b/keyboards/planck/rules.mk @@ -62,8 +62,7 @@ AUDIO_ENABLE ?= no # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -API_SYSEX_ENABLE = no -RAW_ENABLE = yes +API_SYSEX_ENABLE = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend From 1eec2b7277ed24a63c42ea6b53a4db530c35dbbd Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sun, 4 Dec 2016 23:11:22 -0500 Subject: [PATCH 121/124] Update planck.c --- keyboards/planck/planck.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/keyboards/planck/planck.c b/keyboards/planck/planck.c index 0d37b66223..3980b02f50 100644 --- a/keyboards/planck/planck.c +++ b/keyboards/planck/planck.c @@ -1,8 +1,5 @@ #include "planck.h" -#include "raw_hid.h" -#include "keymap.h" - #ifdef ONEHAND_ENABLE __attribute__ ((weak)) const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { @@ -20,14 +17,3 @@ void matrix_init_kb(void) { matrix_init_user(); } - -#ifdef RAW_ENABLE - -void raw_hid_receive( uint8_t *data, uint8_t length ) -{ - // Basic test of Raw HID - // Echo back data received - raw_hid_send( data, length ); -} - -#endif From a05b6a72d9da9fa6056046c9f600957f43b3c8df Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Mon, 5 Dec 2016 20:34:24 -0500 Subject: [PATCH 122/124] Adjusts config for better mousekey support --- keyboards/ergodox/config.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/keyboards/ergodox/config.h b/keyboards/ergodox/config.h index edc60caae1..994a8c6433 100644 --- a/keyboards/ergodox/config.h +++ b/keyboards/ergodox/config.h @@ -1,10 +1,11 @@ #ifndef KEYBOARDS_ERGODOX_CONFIG_H_ #define KEYBOARDS_ERGODOX_CONFIG_H_ -#define MOUSEKEY_DELAY 100 #define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_MAX_SPEED 3 -#define MOUSEKEY_TIME_TO_MAX 10 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 5 +#define MOUSEKEY_MAX_SPEED 2 +#define MOUSEKEY_WHEEL_DELAY 0 #define TAPPING_TOGGLE 1 From 82922a4937dc9683a2364f750a67b80b63767ab5 Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Mon, 5 Dec 2016 20:35:03 -0500 Subject: [PATCH 123/124] A new default layout that supports Shine --- keyboards/ergodox/keymaps/default/keymap.c | 84 +++++++++++++------ .../keymaps/erez_experimental/keymap.c | 2 +- 2 files changed, 59 insertions(+), 27 deletions(-) diff --git a/keyboards/ergodox/keymaps/default/keymap.c b/keyboards/ergodox/keymaps/default/keymap.c index 2f399bd181..4eff280850 100644 --- a/keyboards/ergodox/keymaps/default/keymap.c +++ b/keyboards/ergodox/keymaps/default/keymap.c @@ -7,7 +7,12 @@ #define SYMB 1 // symbols #define MDIA 2 // media keys -#define EPRM M(1) // Macro 1: Reset EEPROM +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, + RGB_SLD +}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Basic layer @@ -17,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | Del | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | \ | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | BkSp | A | S | D | F | G |------| |------| H | J | K | L |; / L2|' / Cmd | + * | BkSp | A | S | D | F | G |------| |------| H |J/Alt | K | L |; / L2|' / Cmd | * |--------+------+------+------+------+------| Hyper| | Meh |------+------+------+------+------+--------| * | LShift |Z/Ctrl| X | C | V | B | | | | N | M | , | . |//Ctrl| RShift | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' @@ -44,56 +49,56 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_HOME, KC_SPC,KC_BSPC,KC_END, // right hand - KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, - TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), - MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_H, ALT_T(KC_J), KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), + MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, KC_LALT, CTL_T(KC_ESC), KC_PGUP, KC_PGDN,KC_TAB, KC_ENT ), /* Keymap 1: Symbol Layer * - * ,--------------------------------------------------. ,--------------------------------------------------. - * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | EPRM | | | | | | | . | 0 | = | | - * `----------------------------------' `----------------------------------' + * ,---------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |---------+------+------+------+------+------+------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |---------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `---------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | EPRM | | | | | | | . | 0 | = | | + * `-----------------------------------' `----------------------------------' * ,-------------. ,-------------. - * | | | | | | + * |Animat| | |Toggle|Solid | * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | + * |Bright|Bright| | | |Hue- |Hue+ | + * |ness- |ness+ |------| |------| | | * | | | | | | | | * `--------------------' `--------------------' */ // SYMBOLS [SYMB] = KEYMAP( // left hand - M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + VRSN, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS, KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV, KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS, EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS, + RGB_MOD,KC_TRNS, KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, + RGB_VAD,RGB_VAI,KC_TRNS, // right hand KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, KC_TRNS, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, KC_TRNS,KC_DOT, KC_0, KC_EQL, KC_TRNS, - KC_TRNS, KC_TRNS, + RGB_TOG, RGB_SLD, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS + KC_TRNS, RGB_HUD, RGB_HUI ), /* Keymap 2: Media and mouse keys * @@ -160,6 +165,33 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return MACRO_NONE; }; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case RGB_SLD: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode(1); + #endif + } + return false; + break; + } + return true; +} + // Runs just one time when the keyboard initializes. void matrix_init_user(void) { diff --git a/keyboards/ergodox/keymaps/erez_experimental/keymap.c b/keyboards/ergodox/keymaps/erez_experimental/keymap.c index 2963c40e31..13b8240ce8 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/keymap.c +++ b/keyboards/ergodox/keymaps/erez_experimental/keymap.c @@ -73,7 +73,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-------------. ,-------------. * | | | |TOG | * ,------|------|------| |------+------+------. - * |VAI |VAD |HUI | |SAI |TOG |MOD | + * |VAI |VAD |HUI | |SAI | |MOD | * | | |------| |------| | | * | | |HUD | |SAD | | | * `--------------------' `--------------------' From 985a091a739c99736d5b17de5161831488dbc219 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Tue, 6 Dec 2016 09:49:05 -0500 Subject: [PATCH 124/124] Update readme.md --- readme.md | 1562 +---------------------------------------------------- 1 file changed, 2 insertions(+), 1560 deletions(-) diff --git a/readme.md b/readme.md index b618334dc3..90584cabcb 100644 --- a/readme.md +++ b/readme.md @@ -4,7 +4,7 @@ This is a keyboard firmware based on the [tmk_keyboard firmware](http://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/). -## Official website +## Official website (currently under construction with the move to the wiki) For an easy-to-read version of this document and the repository, check out [http://qmk.fm](http://qmk.fm). Nicely formatted keyboard and keymap listings are also available there, along with the ability to download .hex files instead of having to setup a build environment and compile them. @@ -31,1567 +31,9 @@ The OLKB product firmwares are maintained by [Jack Humbert](https://github.com/j This is not a tiny project. While this is the main readme, there are many other files you might want to consult. Here are some points of interest: +* [**The Wiki**](https://github.com/jackhumbert/qmk_firmware/wiki) - the entirity of the readme has been moved here * The readme for your own keyboard: This is found under `keyboards//`. So for the ErgoDox EZ, it's [here](keyboards/ergodox/ez/); for the Planck, it's [here](keyboards/planck/) and so on. * The list of possible keycodes you can use in your keymap is actually spread out in a few different places: * [doc/keycode.txt](doc/keycode.txt) - an explanation of those same keycodes. * [quantum/keymap.h](quantum/keymap.h) - this is where the QMK-specific aliases are all set up. Things like the Hyper and Meh key, the Leader key, and all of the other QMK innovations. These are also explained and documented below, but `keymap.h` is where they're actually defined. * The [TMK documentation](doc/TMK_README.md). QMK is based on TMK, and this explains how it works internally. - -# Getting started - -Before you are able to compile, you'll need to install an environment for AVR development. You'll find the instructions for any OS below. If you find another/better way to set things up from scratch, please consider [making a pull request](https://github.com/jackhumbert/qmk_firmware/pulls) with your changes! - -## Build Environment Setup - -### Windows 10 - -Due to some issues with the "Windows (Vista and later)" instructions below, we now recommend following these instructions if you use Windows, which will allow you to use the Windows Subsystem for Linux to compile the firmware. If you are not using Windows 10 with the Anniversary Update installed (which came out in July 2016), you will need to use one of the other methods, such as Docker, Vagrant, or the instructions for Vista and later. - -If you use this method, you will need to use a standalone tool to flash the firmware to the keyboard after you compile it. We recommend the official [QMK Firmware Flasher](https://github.com/jackhumbert/qmk_firmware_flasher/releases). This is because the Windows 10 Subsystem for Linux lacks [libUSB support](https://wpdev.uservoice.com/forums/266908-command-prompt-console-bash-on-ubuntu-on-windo/suggestions/13355724-unable-to-access-usb-devices-from-bash), so it can't access the keyboard's microcontroller. Please add your vote for Microsoft to fix this issue using the link! - -Here are the steps - -1. Install the Windows 10 subsystem for Linux, following [these instructions](http://www.howtogeek.com/249966/how-to-install-and-use-the-linux-bash-shell-on-windows-10/). -2. If you have cloned the repository using git before August 20, 2016, clean up the line endings from wherever you currently access git: - 1. Make sure that you have no changes you haven't committed by running `git status`. ANY UNCOMMITTED CHANGES WILL BE PERMANENTLY LOST. - 2. Run `git rm --cached -r .` - 3. Run `git reset --hard` -3. Open "Bash On Ubuntu On Windows" from the start menu -4. With the bash window open, navigate to your copy of the [qmk_firmware repository](https://github.com/jackhumbert/qmk_firmware) using the `cd` command. The harddisks can be accessed from `/mnt/`. For example, your main hard drive (C:) can be accessed by executiing the command `cd /mnt/c`. If your username is John and the qmk_firmware folder is in your Downloads folder, you can move to it with the command `cd /mnt/c/Users/John/Downloads/qmk_firmware`. You can use the Tab key as you go to help you autocomplete the folder names. -5. Run `sudo util/install_dependencies.sh`. -6. After a while the installation will finish, and you are good to go - -**Note** From time to time, the dependencies might change, so just run `install_dependencies.sh` again if things are not working. - -**Warning:** If you edit Makefiles or shell scripts, make sure you are using an editor that saves the files with Unix line endings. Otherwise the compilation might not work. - - -### Windows (Vista and later) -1. If you have ever installed WinAVR, uninstall it. -2. Install [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Disable smatch, but **be sure to leave the option to add the tools to the PATH checked**. -3. If you are going to flash Infinity based keyboards you will need to install dfu-util, refer to the instructions by [Input Club](https://github.com/kiibohd/controller/wiki/Loading-DFU-Firmware). -4. Install [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). During installation, uncheck the option to install a graphical user interface. **DO NOT change the default installation folder.** The scripts depend on the default location. -5. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/jackhumbert/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer. -6. Open the `\util` folder. -7. Double-click on the `1-setup-path-win` batch script to run it. You'll need to accept a User Account Control prompt. Press the spacebar to dismiss the success message in the command prompt that pops up. -8. Right-click on the `2-setup-environment-win` batch script, select "Run as administrator", and accept the User Account Control prompt. This part may take a couple of minutes, and you'll need to approve a driver installation, but once it finishes, your environment is complete! - -If you have trouble and want to ask for help, it is useful to generate a *Win_Check_Output.txt* file by running `Win_Check.bat` in the `\util` folder. - -### Mac -If you're using [homebrew,](http://brew.sh/) you can use the following commands: - - brew tap osx-cross/avr - brew install avr-libc - brew install dfu-programmer - -This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. - -You can also try these instructions: - -1. Install Xcode from the App Store. -2. Install the Command Line Tools from `Xcode->Preferences->Downloads`. -3. Install [DFU-Programmer][dfu-prog]. - -If you are going to flash Infinity based keyboards you will also need dfu-util - - brew install dfu-util - -### Linux - -To ensure you are always up to date, you can just run `sudo util/install_dependencies.sh`. That should always install all the dependencies needed. - -You can also install things manually, but this documentation might not be always up to date with all requirements. - -The current requirements are the following, but not all might be needed depending on what you do. Also note that some systems might not have all the dependencies available as packages, or they might be named differently. - -``` -build-essential -gcc -unzip -wget -zip -gcc-avr -binutils-avr -avr-libc -dfu-programmer -dfu-util -gcc-arm-none-eabi -binutils-arm-none-eabi -libnewlib-arm-none-eabi -git -``` - -Install the dependencies with your favorite package manager. - -Debian/Ubuntu example: - - sudo apt-get update - sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi - -### Docker - -If this is a bit complex for you, Docker might be the turn-key solution you need. After installing [Docker](https://www.docker.com/products/docker), run the following command at the root of the QMK folder to build a keyboard/keymap: - -```bash -# You'll run this every time you want to build a keymap -# modify the keymap and keyboard assigment to compile what you want -# defaults are ergodox/default - -docker run -e keymap=gwen -e keyboard=ergodox --rm -v $('pwd'):/qmk:rw edasque/qmk_firmware - -# On windows docker seems to have issue with VOLUME tag in Dockerfile, and $('pwd') won't print a windows compliant path, use full path instead like this -docker run -e keymap=default -e keyboard=ergobop --rm -v D:/Users/Sacapuces/Documents/Repositories/qmk:/qmk:rw edasque/qmk_firmware - -``` - -This will compile the targetted keyboard/keymap and leave it in your QMK directory for you to flash. - -### Vagrant -If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](doc/VAGRANT_GUIDE.md). - -## Verify Your Installation -1. If you haven't already, obtain this repository ([https://github.com/jackhumbert/qmk_firmware](https://github.com/jackhumbert/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application. -2. Open up a terminal or command prompt and navigate to the `qmk_firmware` folder using the `cd` command. The command prompt will typically open to your home directory. If, for example, you cloned the repository to your Documents folder, then you would type `cd Documents/qmk_firmware`. If you extracted the file from a zip, then it may be named `qmk_firmware-master` instead. -3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `readme.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboards/`. For example, if you're building for a Planck, run `cd keyboards/planck`. -4. Once you're in the correct keyboard-specific folder, run the `make` command. This should output a lot of information about the build process. More information about the `make` command can be found below. - -# Customizing your keymap - -In every keymap folder, the following files are recommended: - -* `config.h` - the options to configure your keymap -* `keymap.c` - all of your keymap code, required -* `Makefile` - the features of QMK that are enabled, required to run `make` in your keymap folder -* `readme.md` - a description of your keymap, how others might use it, and explanations of features - -## The `make` command - -The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). - -**NOTE:** To abort a make command press `Ctrl-c` - -The following instruction refers to these folders. - -* The `root` (`/`) folder is the qmk_firmware folder, in which are `doc`, `keyboard`, `quantum`, etc. -* The `keyboard` folder is any keyboard project's folder, like `/keyboards/planck`. -* The `keymap` folder is any keymap's folder, like `/keyboards/planck/keymaps/default`. -* The `subproject` folder is the subproject folder of a keyboard, like `/keyboards/ergodox/ez` - -### Simple instructions for building and uploading a keyboard - -**Most keyboards have more specific instructions in the keyboard specific readme.md file, so please check that first** - -If the `keymap` folder contains a file name `Makefile` - -1. Change the directory to the `keymap` folder -2. Run `make -` - -Otherwise, if there's no `Makefile` in the `keymap` folder - -1. Enter the `keyboard` folder -2. Run `make --` - -In the above commands, replace: - -* `` with the name of your keymap -* `` with the name of the subproject (revision or sub-model of your keyboard). For example, for Ergodox it can be `ez` or `infinity`, and for Planck `rev3` or `rev4`. - * If the keyboard doesn't have a subproject, or if you are happy with the default (defined in `rules.mk` file of the `keyboard` folder), you can leave it out. But remember to also remove the dash (`-`) from the command. -* `` The programmer to use. Most keyboards use `dfu`, but some use `teensy`. Infinity keyboards use `dfu-util`. Check the readme file in the keyboard folder to find out which programmer to use. - * If you don't add `----`, where: - -* `` is the name of the keyboard, for example `planck` - * Use `allkb` to compile all keyboards -* `` is the name of the subproject (revision or sub-model of the keyboard). For example, for Ergodox it can be `ez` or `infinity`, and for Planck `rev3` or `rev4`. - * If the keyboard doesn't have any subprojects, it can be left out - * To compile the default subproject, you can leave it out, or specify `defaultsp` - * Use `allsp` to compile all subprojects -* `` is the name of the keymap, for example `algernon` - * Use `allkm` to compile all keymaps -* `` will be explained in more detail below. - -**Note:** When you leave some parts of the command out, you should also remove the dash (`-`). - -As mentioned above, there are some shortcuts, when you are in a: - -* `keyboard` folder, the command will automatically fill the `` part. So you only need to type `--` -* `subproject` folder, it will fill in both `` and `` -* `keymap` folder, then `` and `` will be filled in. If you need to specify the `` use the following syntax `-` - * Note in order to support this shortcut, the keymap needs its own Makefile (see the example [here](/doc/keymap_makefile_example.mk)) -* `keymap` folder of a `subproject`, then everything except the `` will be filled in - -The `` means the following -* If no target is given, then it's the same as `all` below -* `all` compiles the keyboard and generates a `_.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests. -* `dfu`, `teensy` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for Infinity keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. **Note** that some operating systems needs root access for these commands to work, so in that case you need to run for example `sudo make dfu`. -* `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems. - -Some other targets are supported but, but not important enough to be documented here. Check the source code of the make files for more information. - -You can also add extra options at the end of the make command line, after the target - -* `make COLOR=false` - turns off color output -* `make SILENT=true` - turns off output besides errors/warnings -* `make VERBOSE=true` - outputs all of the gcc stuff (not interesting, unless you need to debug) -* `make EXTRAFLAGS=-E` - Preprocess the code without doing any compiling (useful if you are trying to debug #define commands) - -The make command itself also has some additional options, type `make --help` for more information. The most useful is probably `-jx`, which specifies that you want to compile using more than one CPU, the `x` represents the number of CPUs that you want to use. Setting that can greatly reduce the compile times, especially if you are compiling many keyboards/keymaps. I usually set it to one less than the number of CPUs that I have, so that I have some left for doing other things while it's compiling. Note that not all operating systems and make versions supports that option. - -Here are some examples commands - -* `make allkb-allsp-allkm` builds everything (all keyboards, all subprojects, all keymaps). Running just `make` from the `root` will also run this. -* `make` from within a `keyboard` directory, is the same as `make keyboard-allsp-allkm`, which compiles all subprojects and keymaps of the keyboard. **NOTE** that this behaviour has changed. Previously it compiled just the default keymap. -* `make ergodox-infinity-algernon-clean` will clean the build output of the Ergodox Infinity keyboard. This example uses the full syntax and can be run from any folder with a `Makefile` -* `make dfu COLOR=false` from within a keymap folder, builds and uploads the keymap, but without color output. - -## The `Makefile` - -There are 5 different `make` and `Makefile` locations: - -* root (`/`) -* keyboard (`/keyboards//`) -* keymap (`/keyboards//keymaps//`) -* subproject (`/keyboards//`) -* subproject keymap (`/keyboards///keymaps/`) - -The root contains the code used to automatically figure out which keymap or keymaps to compile based on your current directory and commandline arguments. It's considered stable, and shouldn't be modified. The keyboard one will contain the MCU set-up and default settings for your keyboard, and shouldn't be modified unless you are the producer of that keyboard. The keymap Makefile can be modified by users, and is optional. It is included automatically if it exists. You can see an example [here](/doc/keymap_makefile_example.mk) - the last few lines are the most important. The settings you set here will override any defaults set in the keyboard Makefile. **The file is required if you want to run `make` in the keymap folder.** - -For keyboards and subprojects, the make files are split in two parts `Makefile` and `rules.mk`. All settings can be found in the `rules.mk` file, while the `Makefile` is just there for support and including the root `Makefile`. Keymaps contain just one `Makefile` for simplicity. - -### Makefile options - -Set the variables to `no` to disable them, and `yes` to enable them. - -`BOOTMAGIC_ENABLE` - -This allows you to hold a key and the salt key (space by default) and have access to a various EEPROM settings that persist over power loss. It's advised you keep this disabled, as the settings are often changed by accident, and produce confusing results that makes it difficult to debug. It's one of the more common problems encountered in help sessions. - -`MOUSEKEY_ENABLE` - -This gives you control over cursor movements and clicks via keycodes/custom functions. - -`EXTRAKEY_ENABLE` - -This allows you to use the system and audio control key codes. - -`CONSOLE_ENABLE` - -This allows you to print messages that can be read using [`hid_listen`](https://www.pjrc.com/teensy/hid_listen.html). - -By default, all debug (*dprint*) print (*print*, *xprintf*), and user print (*uprint*) messages will be enabled. This will eat up a significant portion of the flash and may make the keyboard .hex file too big to program. - -To disable debug messages (*dprint*) and reduce the .hex file size, include `#define NO_DEBUG` in your `config.h` file. - -To disable print messages (*print*, *xprintf*) and user print messages (*uprint*) and reduce the .hex file size, include `#define NO_PRINT` in your `config.h` file. - -To disable print messages (*print*, *xprintf*) and **KEEP** user print messages (*uprint*), include `#define USER_PRINT` in your `config.h` file. - -To see the text, open `hid_listen` and enjoy looking at your printed messages. - -**NOTE:** Do not include *uprint* messages in anything other than your keymap code. It must not be used within the QMK system framework. Otherwise, you will bloat other people's .hex files. - -`COMMAND_ENABLE` - -This enables magic commands, typically fired with the default magic key combo `LSHIFT+RSHIFT+KEY`. Magic commands include turning on debugging messages (`MAGIC+D`) or temporarily toggling NKRO (`MAGIC+N`). - -`SLEEP_LED_ENABLE` - -Enables your LED to breath while your computer is sleeping. Timer1 is being used here. This feature is largely unused and untested, and needs updating/abstracting. - -`NKRO_ENABLE` - -This allows the keyboard to tell the host OS that up to 248 keys are held down at once (default without NKRO is 6). NKRO is off by default, even if `NKRO_ENABLE` is set. NKRO can be forced by adding `#define FORCE_NKRO` to your config.h or by binding `MAGIC_TOGGLE_NKRO` to a key and then hitting the key. - -`BACKLIGHT_ENABLE` - -This enables your backlight on Timer1 and ports B5, B6, or B7 (for now). You can specify your port by putting this in your `config.h`: - - #define BACKLIGHT_PIN B7 - -`MIDI_ENABLE` - -This enables MIDI sending and receiving with your keyboard. To enter MIDI send mode, you can use the keycode `MI_ON`, and `MI_OFF` to turn it off. This is a largely untested feature, but more information can be found in the `quantum/quantum.c` file. - -`UNICODE_ENABLE` - -This allows you to send unicode symbols via `UC()` in your keymap. Only codes up to 0x7FFF are currently supported. - -`UNICODEMAP_ENABLE` - -This allows sending unicode symbols using `X()` in your keymap. Codes -up to 0xFFFFFFFF are supported, including emojis. You will need to maintain -a separate mapping table in your keymap file. - -Known limitations: -- Under Mac OS, only codes up to 0xFFFF are supported. -- Under Linux ibus, only codes up to 0xFFFFF are supported (but anything important is still under this limit for now). - -Characters out of range supported by the OS will be ignored. - -`BLUETOOTH_ENABLE` - -This allows you to interface with a Bluefruit EZ-key to send keycodes wirelessly. It uses the D2 and D3 pins. - -`AUDIO_ENABLE` - -This allows you output audio on the C6 pin (needs abstracting). See the [audio section](#driving-a-speaker---audio-support) for more information. - -`VARIABLE_TRACE` - -Use this to debug changes to variable values, see the [tracing variables](#tracing-variables) section for more information. - -`API_SYSEX_ENABLE` - -This enables using the Quantum SYSEX API to send strings (somewhere?) - -### Customizing Makefile options on a per-keymap basis - -If your keymap directory has a file called `Makefile` (note the filename), any Makefile options you set in that file will take precedence over other Makefile options for your particular keyboard. - -So let's say your keyboard's makefile has `BACKLIGHT_ENABLE = yes` (or maybe doesn't even list the `BACKLIGHT_ENABLE` option, which would cause it to be off). You want your particular keymap to not have the debug console, so you make a file called `Makefile` and specify `BACKLIGHT_ENABLE = no`. - -You can use the `doc/keymap_makefile_example.md` as a template/starting point. - -## The `config.h` file - -There are 2 `config.h` locations: - -* keyboard (`/keyboards//`) -* keymap (`/keyboards//keymaps//`) - -The keyboard `config.h` is included only if the keymap one doesn't exist. The format to use for your custom one [is here](/doc/keymap_config_h_example.h). If you want to override a setting from the parent `config.h` file, you need to do this: - -```c -#undef MY_SETTING -#define MY_SETTING 4 -``` - -For a value of `4` for this imaginary setting. So we `undef` it first, then `define` it. - -You can then override any settings, rather than having to copy and paste the whole thing. - -# Going beyond the keycodes - -Aside from the [basic keycodes](doc/keycode.txt), your keymap can include shortcuts to common operations. - -## Quick aliases to common actions - -Your keymap can include shortcuts to common operations (called "function actions" in tmk). - -These functions work the same way that their `ACTION_*` functions do - they're just quick aliases. To dig into all of the tmk `ACTION_*` functions, please see the [TMK documentation](https://github.com/jackhumbert/qmk_firmware/blob/master/doc/keymap.md#2-action). - -Instead of using `FNx` when defining `ACTION_*` functions, you can use `F(x)` - the benefit here is being able to use more than 32 function actions (up to 4096), if you happen to need them. - -### Switching and toggling layers - -`MO(layer)` - momentary switch to *layer*. As soon as you let go of the key, the layer is deactivated and you pop back out to the previous layer. When you apply this to a key, that same key must be set as `KC_TRNS` on the destination layer. Otherwise, you won't make it back to the original layer when you release the key (and you'll get a keycode sent). You can only switch to layers *above* your current layer. If you're on layer 0 and you use `MO(1)`, that will switch to layer 1 just fine. But if you include `MO(3)` on layer 5, that won't do anything for you -- because layer 3 is lower than layer 5 on the stack. - -`OSL(layer)` - momentary switch to *layer*, as a one-shot operation. So if you have a key that's defined as `OSL(1)`, and you tap that key, then only the very next keystroke would come from layer 1. You would drop back to layer zero immediately after that one keystroke. That's handy if you have a layer full of custom shortcuts -- for example, a dedicated key for closing a window. So you tap your one-shot layer mod, then tap that magic 'close window' key, and keep typing like a boss. Layer 1 would remain active as long as you hold that key down, too (so you can use it like a momentary toggle-layer key with extra powers). - -`LT(layer, kc)` - momentary switch to *layer* when held, and *kc* when tapped. Like `MO()`, this only works upwards in the layer stack (`layer` must be higher than the current layer). - -`TG(layer)` - toggles a layer on or off. As with `MO()`, you should set this key as `KC_TRNS` in the destination layer so that tapping it again actually toggles back to the original layer. Only works upwards in the layer stack. - -`TO(layer)` - Goes to a layer. This code is special, because it lets you go either up or down the stack -- just goes directly to the layer you want. So while other codes only let you go _up_ the stack (from layer 0 to layer 3, for example), `TO(2)` is going to get you to layer 2, no matter where you activate it from -- even if you're currently on layer 5. This gets activated on keydown (as soon as the key is pressed). - - -### Fun with modifier keys - -* `LSFT(kc)` - applies left Shift to *kc* (keycode) - `S(kc)` is an alias -* `RSFT(kc)` - applies right Shift to *kc* -* `LCTL(kc)` - applies left Control to *kc* -* `RCTL(kc)` - applies right Control to *kc* -* `LALT(kc)` - applies left Alt to *kc* -* `RALT(kc)` - applies right Alt to *kc* -* `LGUI(kc)` - applies left GUI (command/win) to *kc* -* `RGUI(kc)` - applies right GUI (command/win) to *kc* -* `HYPR(kc)` - applies Hyper (all modifiers) to *kc* -* `MEH(kc)` - applies Meh (all modifiers except Win/Cmd) to *kc* -* `LCAG(kc)` - applies CtrlAltGui to *kc* - -You can also chain these, like this: - - LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress. - -The following shortcuts automatically add `LSFT()` to keycodes to get commonly used symbols. Their long names are also available and documented in `/quantum/keymap_common.h`. - - KC_TILD ~ - KC_EXLM ! - KC_AT @ - KC_HASH # - KC_DLR $ - KC_PERC % - KC_CIRC ^ - KC_AMPR & - KC_ASTR * - KC_LPRN ( - KC_RPRN ) - KC_UNDS _ - KC_PLUS + - KC_DQUO " - KC_LCBR { - KC_RCBR } - KC_LABK < - KC_RABK > - KC_PIPE | - KC_COLN : - -`OSM(mod)` - this is a "one shot" modifier. So let's say you have your left Shift key defined as `OSM(MOD_LSFT)`. Tap it, let go, and Shift is "on" -- but only for the next character you'll type. So to write "The", you don't need to hold down Shift -- you tap it, tap t, and move on with life. And if you hold down the left Shift key, it just works as a left Shift key, as you would expect (so you could type THE). There's also a magical, secret way to "lock" a modifier by tapping it multiple times. If you want to learn more about that, open an issue. :) - -`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down. - -These are the values you can use for the `mod` in `MT()` and `OSM()` (right-hand modifiers are not available for `MT()`): - - * MOD_LCTL - * MOD_LSFT - * MOD_LALT - * MOD_LGUI - * MOD_HYPR - * MOD_MEH - -These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped. - -We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact: - - * `CTL_T(kc)` - is LCTL when held and *kc* when tapped - * `SFT_T(kc)` - is LSFT when held and *kc* when tapped - * `ALT_T(kc)` - is LALT when held and *kc* when tapped - * `GUI_T(kc)` - is LGUI when held and *kc* when tapped - * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/) - * `LCAG_T(kc)` - is CtrlAltGui when held and *kc* when tapped - * `MEH_T(kc)` - is like Hyper, but not as cool -- does not include the Cmd/Win key, so just sends Alt+Ctrl+Shift. - -## Space Cadet Shift: The future, built in - -Steve Losh [described](http://stevelosh.com/blog/2012/10/a-modern-space-cadet/) the Space Cadet Shift quite well. Essentially, you hit the left Shift on its own, and you get an opening parenthesis; hit the right Shift on its own, and you get the closing one. When hit with other keys, the Shift key keeps working as it always does. Yes, it's as cool as it sounds. - -To use it, use `KC_LSPO` (Left Shift, Parens Open) for your left Shift on your keymap, and `KC_RSPC` (Right Shift, Parens Close) for your right Shift. - -It's defaulted to work on US keyboards, but if your layout uses different keys for parenthesis, you can define those in your `config.h` like this: - - #define LSPO_KEY KC_9 - #define RSPC_KEY KC_0 - -You can also choose between different rollover behaviors of the shift keys by defining: - - #define DISABLE_SPACE_CADET_ROLLOVER - -in your `config.h`. Disabling rollover allows you to use the opposite shift key to cancel the space cadet state in the event of an erroneous press instead of emitting a pair of parentheses when the keys are released. - -The only other thing you're going to want to do is create a `Makefile` in your keymap directory and set the following: - -``` -COMMAND_ENABLE = no # Commands for debug and configuration -``` - -This is just to keep the keyboard from going into command mode when you hold both Shift keys at the same time. - -## The Leader key: A new kind of modifier - -If you've ever used Vim, you know what a Leader key is. If not, you're about to discover a wonderful concept. :) Instead of hitting Alt+Shift+W for example (holding down three keys at the same time), what if you could hit a _sequence_ of keys instead? So you'd hit our special modifier (the Leader key), followed by W and then C (just a rapid succession of keys), and something would happen. - -That's what `KC_LEAD` does. Here's an example: - -1. Pick a key on your keyboard you want to use as the Leader key. Assign it the keycode `KC_LEAD`. This key would be dedicated just for this -- it's a single action key, can't be used for anything else. -2. Include the line `#define LEADER_TIMEOUT 300` somewhere in your keymap.c file, probably near the top. The 300 there is 300ms -- that's how long you have for the sequence of keys following the leader. You can tweak this value for comfort, of course. -3. Within your `matrix_scan_user` function, do something like this: - -``` -LEADER_EXTERNS(); - -void matrix_scan_user(void) { - LEADER_DICTIONARY() { - leading = false; - leader_end(); - - SEQ_ONE_KEY(KC_F) { - register_code(KC_S); - unregister_code(KC_S); - } - SEQ_TWO_KEYS(KC_A, KC_S) { - register_code(KC_H); - unregister_code(KC_H); - } - SEQ_THREE_KEYS(KC_A, KC_S, KC_D) { - register_code(KC_LGUI); - register_code(KC_S); - unregister_code(KC_S); - unregister_code(KC_LGUI); - } - } -} -``` - -As you can see, you have three function. you can use - `SEQ_ONE_KEY` for single-key sequences (Leader followed by just one key), and `SEQ_TWO_KEYS` and `SEQ_THREE_KEYS` for longer sequences. Each of these accepts one or more keycodes as arguments. This is an important point: You can use keycodes from **any layer on your keyboard**. That layer would need to be active for the leader macro to fire, obviously. - -## Tap Dance: A single key can do 3, 5, or 100 different things - -Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. It's one of the nicest community-contributed features in the firmware, conceived and created by [algernon](https://github.com/algernon) in [#451](https://github.com/jackhumbert/qmk_firmware/pull/451). Here's how algernon describes the feature: - -With this feature one can specify keys that behave differently, based on the amount of times they have been tapped, and when interrupted, they get handled before the interrupter. - -To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets explore a certain setup! We want one key to send `Space` on single tap, but `Enter` on double-tap. - -With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be send first. Thus, `SPC a` will result in `a SPC` being sent, if they are typed within `TAPPING_TERM`. With the tap dance feature, that'll come out as `SPC a`, correctly. - -The implementation hooks into two parts of the system, to achieve this: into `process_record_quantum()`, and the matrix scan. We need the latter to be able to time out a tap sequence even when a key is not being pressed, so `SPC` alone will time out and register after `TAPPING_TERM` time. - -But lets start with how to use it, first! - -First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()`, takes a number, which will later be used as an index into the `tap_dance_actions` array. - -This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are three possible options: - -* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held. -* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action. -* `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function on when the dance action finishes (like the previous option), and the last function when the tap dance action resets. - -The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. - -And that's the bulk of it! - -And now, on to the explanation of how it works! - -The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and the timer. - -This means that you have `TAPPING_TERM` time to tap the key again, you do not have to input all the taps within that timeframe. This allows for longer tap counts, with minimal impact on responsiveness. - -Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of tap-dance keys. - -For the sake of flexibility, tap-dance actions can be either a pair of keycodes, or a user function. The latter allows one to handle higher tap counts, or do extra things, like blink the LEDs, fiddle with the backlighting, and so on. This is accomplished by using an union, and some clever macros. - -### Examples - -Here's a simple example for a single definition: - -1. In your `makefile`, add `TAP_DANCE_ENABLE = yes` -2. In your `config.h` (which you can copy from `qmk_firmware/keyboards/planck/config.h` to your keymap directory), add `#define TAPPING_TERM 200` -3. In your `keymap.c` file, define the variables and definitions, then add to your keymap: - -```c -//Tap Dance Declarations -enum { - TD_ESC_CAPS = 0 -}; - -//Tap Dance Definitions -qk_tap_dance_action_t tap_dance_actions[] = { - //Tap once for Esc, twice for Caps Lock - [TD_ESC_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_CAPS) -// Other declarations would go here, separated by commas, if you have them -}; - -//In Layer declaration, add tap dance item in place of a key code -TD(TD_ESC_CAPS) -``` - -Here's a more complex example involving custom actions: - -```c -enum { - CT_SE = 0, - CT_CLN, - CT_EGG, - CT_FLSH, -}; - -/* Have the above three on the keymap, TD(CT_SE), etc... */ - -void dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code (KC_RSFT); - register_code (KC_SCLN); - } else { - register_code (KC_SCLN); - } -} - -void dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code (KC_RSFT); - unregister_code (KC_SCLN); - } else { - unregister_code (KC_SCLN); - } -} - -void dance_egg (qk_tap_dance_state_t *state, void *user_data) { - if (state->count >= 100) { - SEND_STRING ("Safety dance!"); - reset_tap_dance (state); - } -} - -// on each tap, light up one led, from right to left -// on the forth tap, turn them off from right to left -void dance_flsh_each(qk_tap_dance_state_t *state, void *user_data) { - switch (state->count) { - case 1: - ergodox_right_led_3_on(); - break; - case 2: - ergodox_right_led_2_on(); - break; - case 3: - ergodox_right_led_1_on(); - break; - case 4: - ergodox_right_led_3_off(); - _delay_ms(50); - ergodox_right_led_2_off(); - _delay_ms(50); - ergodox_right_led_1_off(); - } -} - -// on the fourth tap, set the keyboard on flash state -void dance_flsh_finished(qk_tap_dance_state_t *state, void *user_data) { - if (state->count >= 4) { - reset_keyboard(); - reset_tap_dance(state); - } -} - -// if the flash state didnt happen, then turn off leds, left to right -void dance_flsh_reset(qk_tap_dance_state_t *state, void *user_data) { - ergodox_right_led_1_off(); - _delay_ms(50); - ergodox_right_led_2_off(); - _delay_ms(50); - ergodox_right_led_3_off(); -} - -qk_tap_dance_action_t tap_dance_actions[] = { - [CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT) - ,[CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_cln_finished, dance_cln_reset) - ,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg) - ,[CT_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED (dance_flsh_each, dance_flsh_finished, dance_flsh_reset) -}; -``` - -## Temporarily setting the default layer - -`DF(layer)` - sets default layer to *layer*. The default layer is the one at the "bottom" of the layer stack - the ultimate fallback layer. This currently does not persist over power loss. When you plug the keyboard back in, layer 0 will always be the default. It is theoretically possible to work around that, but that's not what `DF` does. - -## Prevent stuck modifiers - -Consider the following scenario: - -1. Layer 0 has a key defined as Shift. -2. The same key is defined on layer 1 as the letter A. -3. User presses Shift. -4. User switches to layer 1 for whatever reason. -5. User releases Shift, or rather the letter A. -6. User switches back to layer 0. - -Shift was actually never released and is still considered pressed. - -If such situation bothers you add this to your `config.h`: - - #define PREVENT_STUCK_MODIFIERS - -This option uses 5 bytes of memory per every 8 keys on the keyboard -rounded up (5 bits per key). For example on Planck (48 keys) it uses -(48/8)\*5 = 30 bytes. - -## Macro shortcuts: Send a whole string when pressing just one key - -Instead of using the `ACTION_MACRO` function, you can simply use `M(n)` to access macro *n* - *n* will get passed into the `action_get_macro` as the `id`, and you can use a switch statement to trigger it. This gets called on the keydown and keyup, so you'll need to use an if statement testing `record->event.pressed` (see keymap_default.c). - -```c -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. -{ - switch(id) { - case 0: // this would trigger when you hit a key mapped as M(0) - if (record->event.pressed) { - return MACRO( I(255), T(H), T(E), T(L), T(L), W(255), T(O), END ); // this sends the string 'hello' when the macro executes - } - break; - } - return MACRO_NONE; -}; -``` -A macro can include the following commands: - -* I() change interval of stroke in milliseconds. -* D() press key. -* U() release key. -* T() type key(press and release). -* W() wait (milliseconds). -* END end mark. - -So above you can see the stroke interval changed to 255ms between each keystroke, then a bunch of keys being typed, waits a while, then the macro ends. - -Note: Using macros to have your keyboard send passwords for you is possible, but a bad idea. - -### Advanced macro functions - -To get more control over the keys/actions your keyboard takes, the following functions are available to you in the `action_get_macro` function block: - -* `record->event.pressed` - -This is a boolean value that can be tested to see if the switch is being pressed or released. An example of this is - -```c -if (record->event.pressed) { - // on keydown -} else { - // on keyup -} -``` - -* `register_code();` - -This sends the `` keydown event to the computer. Some examples would be `KC_ESC`, `KC_C`, `KC_4`, and even modifiers such as `KC_LSFT` and `KC_LGUI`. - -* `unregister_code();` - -Parallel to `register_code` function, this sends the `` keyup event to the computer. If you don't use this, the key will be held down until it's sent. - -* `layer_on();` - -This will turn on the layer `` - the higher layer number will always take priority. Make sure you have `KC_TRNS` for the key you're pressing on the layer you're switching to, or you'll get stick there unless you have another plan. - -* `layer_off();` - -This will turn off the layer ``. - -* `clear_keyboard();` - -This will clear all mods and keys currently pressed. - -* `clear_mods();` - -This will clear all mods currently pressed. - -* `clear_keyboard_but_mods();` - -This will clear all keys besides the mods currently pressed. - -* `update_tri_layer(layer_1, layer_2, layer_3);` - -If the user attempts to activate layer 1 AND layer 2 at the same time (for example, by hitting their respective layer keys), layer 3 will be activated. Layers 1 and 2 will _also_ be activated, for the purposes of fallbacks (so a given key will fall back from 3 to 2, to 1 -- and only then to 0). - -#### Naming your macros - -If you have a bunch of macros you want to refer to from your keymap, while keeping the keymap easily readable, you can just name them like so: - -``` -#define AUD_OFF M(6) -#define AUD_ON M(7) -#define MUS_OFF M(8) -#define MUS_ON M(9) -#define VC_IN M(10) -#define VC_DE M(11) -#define PLOVER M(12) -#define EXT_PLV M(13) -``` - -As was done on the [Planck default keymap](/keyboards/planck/keymaps/default/keymap.c#L33-L40) - -#### Timer functionality - -It's possible to start timers and read values for time-specific events - here's an example: - -```c -static uint16_t key_timer; -key_timer = timer_read(); -if (timer_elapsed(key_timer) < 100) { - // do something if less than 100ms have passed -} else { - // do something if 100ms or more have passed -} -``` - -It's best to declare the `static uint16_t key_timer;` outside of the macro block (top of file, etc). - -#### Example: Single-key copy/paste (hold to copy, tap to paste) - -With QMK, it's easy to make one key do two things, as long as one of those things is being a modifier. :) So if you want a key to act as Ctrl when held and send the letter R when tapped, that's easy: `CTL_T(KC_R)`. But what do you do when you want that key to send Ctrl-V (paste) when tapped, and Ctrl-C (copy) when held? - -Here's what you do: - - -``` -static uint16_t key_timer; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case 0: { - if (record->event.pressed) { - key_timer = timer_read(); // if the key is being pressed, we start the timer. - } - else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down"). - if (timer_elapsed(key_timer) > 150) { // 150 being 150ms, the threshhold we pick for counting something as a tap. - return MACRO( D(LCTL), T(C), U(LCTL), END ); - } - else { - return MACRO( D(LCTL), T(V), U(LCTL), END ); - } - } - break; - } - } - return MACRO_NONE; -}; -``` - -And then, to assign this macro to a key on your keyboard layout, you just use `M(0)` on the key you want to press for copy/paste. - -## Dynamic macros: record and replay macros in runtime - -In addition to the static macros described above, you may enable the dynamic macros which you may record while writing. They are forgotten as soon as the keyboard is unplugged. Only two such macros may be stored at the same time, with the total length of 64 keypresses (by default). - -To enable them, first add a new element to the `planck_keycodes` enum -- `DYNAMIC_MACRO_RANGE`: - - enum planck_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - PLOVER, - LOWER, - RAISE, - BACKLIT, - EXT_PLV, - DYNAMIC_MACRO_RANGE, - }; - -Afterwards create a new layer called `_DYN`: - - #define _DYN 6 /* almost any other free number should be ok */ - -Below these two modifications include the `dynamic_macro.h` header: - - #include "dynamic_macro.h"` - -Then define the `_DYN` layer with the following keys: `DYN_REC_START1`, `DYN_MACRO_PLAY1`,`DYN_REC_START2` and `DYN_MACRO_PLAY2`. It may also contain other keys, it doesn't matter apart from the fact that you won't be able to record these keys in the dynamic macros. - - [_DYN]= { - {_______, DYN_REC_START1, DYN_MACRO_PLAY1, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, DYN_REC_START2, DYN_MACRO_PLAY2, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} - }, - -Add the following code to the very beginning of your `process_record_user()` function: - - if (!process_record_dynamic_macro(keycode, record)) { - return false; - } - -To start recording the macro, press either `DYN_REC_START1` or `DYN_REC_START2`. To finish the recording, press the `_DYN` layer button. The handler awaits specifically for the `MO(_DYN)` keycode as the "stop signal" so please don't use any fancy ways to access this layer, use the regular `MO()` modifier. To replay the macro, press either `DYN_MACRO_PLAY1` or `DYN_MACRO_PLAY2`. - -If the LED-s start blinking during the recording with each keypress, it means there is no more space for the macro in the macro buffer. To fit the macro in, either make the other macro shorter (they share the same buffer) or increase the buffer size by setting the `DYNAMIC_MACRO_SIZE` preprocessor macro (default value: 128; please read the comments for it in the header). - -For the details about the internals of the dynamic macros, please read the comments in the `dynamic_macro.h` header. - -## Additional keycode aliases for software-implemented layouts (Colemak, Dvorak, etc) - -Everything is assuming you're in Qwerty (in software) by default, but there is built-in support for using a Colemak or Dvorak layout by including this at the top of your keymap: - - #include - -If you use Dvorak, use `keymap_dvorak.h` instead of `keymap_colemak.h` for this line. After including this line, you will get access to: - - * `CM_*` for all of the Colemak-equivalent characters - * `DV_*` for all of the Dvorak-equivalent characters - -These implementations assume you're using Colemak or Dvorak on your OS, not on your keyboard - this is referred to as a software-implemented layout. If your computer is in Qwerty and your keymap is in Colemak or Dvorak, this is referred to as a firmware-implemented layout, and you won't need these features. - -To give an example, if you're using software-implemented Colemak, and want to get an `F`, you would use `CM_F` - `KC_F` under these same circumstances would result in `T`. - -## Additional language support - -In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware (but it's being worked on - see Unicode support). - -## Unicode support - -There are three Unicode keymap definition method available in QMK: - -### UNICODE_ENABLE - -Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in -keymap file, where *n* is a 4 digit hexadecimal. - -### UNICODEMAP_ENABLE - -Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping -table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. -The keycode function is `X(n)` where *n* is the array index of the mapping -table. - -### UCIS_ENABLE - -TBD - -Unicode input in QMK works by inputing a sequence of characters to the OS, -sort of like macro. Unfortunately, each OS has different ideas on how Unicode is inputted. - -This is the current list of Unicode input method in QMK: - -* UC_OSX: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex. -* UC_LNX: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else. -* UC_WIN: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead. -* UC_WINC: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows. - -## Backlight Breathing - -In order to enable backlight breathing, the following line must be added to your config.h file. - - #define BACKLIGHT_BREATHING - -The following function calls are used to control the breathing effect. - -* ```breathing_enable()``` - Enable the free-running breathing effect. -* ```breathing_disable()``` - Disable the free-running breathing effect immediately. -* ```breathing_self_disable()``` - Disable the free-running breathing effect after the current effect ends. -* ```breathing_toggle()``` - Toggle the free-running breathing effect. -* ```breathing_defaults()``` - Reset the speed and brightness settings of the breathing effect. - -The following function calls are used to control the maximum brightness of the breathing effect. - -* ```breathing_intensity_set(value)``` - Set the brightness of the breathing effect when it is at its max value. -* ```breathing_intensity_default()``` - Reset the brightness of the breathing effect to the default value based on the current backlight intensity. - -The following function calls are used to control the cycling speed of the breathing effect. - -* ```breathing_speed_set(value)``` - Set the speed of the breathing effect - how fast it cycles. -* ```breathing_speed_inc(value)``` - Increase the speed of the breathing effect by a fixed value. -* ```breathing_speed_dec(value)``` - Decrease the speed of the breathing effect by a fixed value. -* ```breathing_speed_default()``` - Reset the speed of the breathing effect to the default value. - -The following example shows how to enable the backlight breathing effect when the FUNCTION layer macro button is pressed: - - case MACRO_FUNCTION: - if (record->event.pressed) - { - breathing_speed_set(3); - breathing_enable(); - layer_on(LAYER_FUNCTION); - } - else - { - breathing_speed_set(1); - breathing_self_disable(); - layer_off(LAYER_FUNCTION); - } - break; - -The following example shows how to pulse the backlight on-off-on when the RAISED layer macro button is pressed: - - case MACRO_RAISED: - if (record->event.pressed) - { - layer_on(LAYER_RAISED); - breathing_speed_set(2); - breathing_pulse(); - update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST); - } - else - { - layer_off(LAYER_RAISED); - update_tri_layer(LAYER_LOWER, LAYER_RAISED, LAYER_ADJUST); - } - break; - -## Other firmware shortcut keycodes - -* `RESET` - puts the MCU in DFU mode for flashing new firmware (with `make dfu`) -* `DEBUG` - the firmware into debug mode - you'll need hid_listen to see things -* `BL_ON` - turns the backlight on -* `BL_OFF` - turns the backlight off -* `BL_` - sets the backlight to level *n* -* `BL_INC` - increments the backlight level by one -* `BL_DEC` - decrements the backlight level by one -* `BL_TOGG` - toggles the backlight -* `BL_STEP` - steps through the backlight levels - -Enable the backlight from the Makefile. - -# Custom Quantum functions - -All of these functions are available in the `*_kb()` or `*_user()` variety. `kb` ones should only be used in the `/.c` file, and `user` ones should only be used in the `keymap.c`. The keyboard ones call the user ones - it's necessary to keep these calls to allow the keymap functions to work correctly. - -## `void matrix_init_*(void)` - -This function gets called when the matrix is initiated, and can contain start-up code for your keyboard/keymap. - -## `void matrix_scan_*(void)` - -This function gets called at every matrix scan, which is basically as often as the MCU can handle. Be careful what you put here, as it will get run a lot. - -## `bool process_record_*(uint16_t keycode, keyrecord_t *record)` - -This function gets called on every keypress/release, and is where you can define custom functionality. The return value is whether or not QMK should continue processing the keycode - returning `false` stops the execution. - -The `keycode` variable is whatever is defined in your keymap, eg `MO(1)`, `KC_L`, etc. and can be switch-cased to execute code whenever a particular code is pressed. - -The `record` variable contains infomation about the actual press: - -``` -keyrecord_t record { - keyevent_t event { - keypos_t key { - uint8_t col - uint8_t row - } - bool pressed - uint16_t time - } -} -``` - -The conditional `if (record->event.pressed)` can tell if the key is being pressed or released, and you can execute code based on that. - -## `void led_set_*(uint8_t usb_led)` - -This gets called whenever there is a state change on your host LEDs (eg caps lock, scroll lock, etc). The LEDs are defined as: - -``` -#define USB_LED_NUM_LOCK 0 -#define USB_LED_CAPS_LOCK 1 -#define USB_LED_SCROLL_LOCK 2 -#define USB_LED_COMPOSE 3 -#define USB_LED_KANA 4 -``` - -and can be tested against the `usb_led` with a conditional like `if (usb_led & (1<` script to help get you started - you can simply pass your keyboard's name into the script, and all of the necessary files will be created. The components of each are described below. - -## `/keyboards//config.h` - -The `USB Device descriptor parameter` block contains parameters are used to uniquely identify your keyboard, but they don't really matter to the machine. - -Your `MATRIX_ROWS` and `MATRIX_COLS` are the numbers of rows and cols in your keyboard matrix - this may be different than the number of actual rows and columns on your keyboard. There are some tricks you can pull to increase the number of keys in a given matrix, but most keyboards are pretty straight-forward. - -The `MATRIX_ROW_PINS` and `MATRIX_COL_PINS` are the pins your MCU uses on each row/column. Your schematic (if you have one) will have this information on it, and the values will vary depending on your setup. This is one of the most important things to double-check in getting your keyboard setup correctly. - -For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the diodes in the `COL2ROW` position, but it's possible that they are in the other - people coming from EasyAVR often use `ROW2COL`. Nothing will function if this is incorrect. - -`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported. - -`BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap. - -`BACKLIGHT_LEVELS` is how many levels exist for your backlight - max is 15, and they are computed automatically from this number. - -## `/keyboards//Makefile` - -The values at the top likely won't need to be changed, since most boards use the `atmega32u4` chip. The `BOOTLOADER_SIZE` will need to be adjusted based on your MCU type. It's defaulted to the Teensy, since that's the most common controller. Below is quoted from the `Makefile`. - -``` -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 -``` - -At the bottom of the file, you'll find lots of features to turn on and off - all of these options should be set with `?=` to allow for the keymap overrides. `?=` only assigns if the variable was previously undefined. For the full documenation of these features, see the [Makefile options](#makefile-options). - -## `/keyboards//readme.md` - -This is where you'll describe your keyboard - please write as much as you can about it! Talking about default functionality/features is useful here. Feel free to link to external pages/sites if necessary. Images can be included here as well. This file will be rendered into a webpage at qmk.fm/keyboards//. - -## `/keyboards//.c` - -This is where all of the custom logic for your keyboard goes - you may not need to put anything in this file, since a lot of things are configured automatically. All of the `*_kb()` functions are defined here. If you modify them, remember to keep the calls to `*_user()`, or things in the keymaps might not work. You can read more about the functions [here](#custom-quantum-functions-for-keyboards-and-keymaps) - -## `/keyboards//.h` - -Here is where you can (optionally) define your `KEYMAP` function to remap your matrix into a more readable format. With ortholinear boards, this isn't always necessary, but it can help to accomodate the dead spots on your matrix, where there are keys that take up more than one space (2u, staggering, 6.25u, etc). The example shows the difference between the physical keys, and the matrix design: - -``` -#define KEYMAP( \ - k00, k01, k02, \ - k10, k11 \ -) \ -{ \ - { k00, k01, k02 }, \ - { k10, KC_NO, k11 }, \ -} -``` - -Each of the `kxx` variables needs to be unique, and usually follows the format `k`. You can place `KC_NO` where your dead keys are in your matrix. - -# Unit Testing - -If you are new to unit testing, then you can find many good resources on internet. However most of it is scattered around in small pieces here and there, and there's also many different opinions, so I won't give any recommendations. - -Instead I recommend these two books, explaining two different styles of Unit Testing in detail. - -* "Test Driven Development: By Example: Kent Beck" -* "Growing Object-Oriented Software, Guided By Tests: Steve Freeman, Nat Pryce" - -If you prefer videos there are Uncle Bob's [Clean Coders Videos](https://cleancoders.com/), which unfortunately cost quite a bit, especially if you want to watch many of them. But James Shore has a free [Let's Play](http://www.jamesshore.com/Blog/Lets-Play) video series. - -## Google Test and Google Mock -It's possible to Unit Test your code using [Google Test](https://github.com/google/googletest). The Google Test framework also includes another component for writing testing mocks and stubs, called "Google Mock". For information how to write the actual tests, please refer to the documentation on that site. - -## Use of C++ - -Note that Google Test and therefore any test has to be written in C++, even if the rest of the QMK codebases is written in C. This should hopefully not be a problem even if you don't know any C++, since there's quite clear documentation and examples of the required C++ features, and you can write the rest of the test code almost as you would write normal C. Note that some compiler errors which you might get can look quite scary, but just read carefully what it says, and you should be ok. - -One thing to remember, is that you have to append `extern "C"` around all of your C file includes. - -## Adding tests for new or existing features - -If you want to unit test some feature, then take a look at the existing serial_link tests, in the `quantum/serial_link/tests folder`, and follow the steps below to create a similar structure. - -1. If it doesn't already exist, add a test subfolder to the folder containing the feature. -2. Create a `testlist.mk` and a `rules.mk` file in that folder. -3. Include those files from the root folder `testlist.mk`and `build_test.mk` respectively. -4. Add a new name for your testgroup to the `testlist.mk` file. Each group defined there will be a separate executable. And that's how you can support mocking out different parts. Note that it's worth adding some common prefix, just like it's done for the serial_link tests. The reason for that is that the make command allows substring filtering, so this way you can easily run a subset of the tests. -5. Define the source files and required options in the `rules.mk` file. - * `_SRC` for source files - * `_DEFS` for additional defines - * `_INC` for additional include folders -6. Write the tests in a new cpp file inside the test folder you created. That file has to be one of the files included from the `rules.mk` file. - -Note how there's several different tests, each mocking out a separate part. Also note that each of them only compiles the very minimum that's needed for the tests. It's recommend that you try to do the same. For a relevant video check out [Matt Hargett "Advanced Unit Testing in C & C++](https://www.youtube.com/watch?v=Wmy6g-aVgZI) - -## Running the tests - -To run all the tests in the codebase, type `make test`. You can also run test matching a substring by typing `make test-matchingsubstring` Note that the tests are always compiled with the native compiler of your platform, so they are also run like any other program on your computer. - -## Debugging the tests - -If there are problems with the tests, you can find the executable in the `./build/test` folder. You should be able to run those with GDB or a similar debugger. - -## Full Integration tests - -It's not yet possible to do a full integration test, where you would compile the whole firmware and define a keymap that you are going to test. However there are plans for doing that, because writing tests that way would probably be easier, at least for people that are not used to unit testing. - -In that model you would emulate the input, and expect a certain output from the emulated keyboard. - -# Tracing variables - -Sometimes you might wonder why a variable gets changed and where, and this can be quite tricky to track down without having a debugger. It's of course possible to manually add print statements to track it, but you can also enable the variable trace feature. This works for both for variables that are changed by the code, and when the variable is changed by some memory corruption. - -To take the feature into use add `VARIABLE_TRACE=x` to the end of you make command. `x` represents the number of variables you want to trace, which is usually 1. - -Then at a suitable place in the code, call `ADD_TRACED_VARIABLE`, to begin the tracing. For example to trace all the layer changes, you can do this -```c -void matrix_init_user(void) { - ADD_TRACED_VARIABLE("layer", &layer_state, sizeof(layer_state)); -} -``` - -This will add a traced variable named "layer" (the name is just for your information), which tracks the memory location of `layer_state`. It tracks 4 bytes (the size of `layer_state`), so any modification to the variable will be reported. By default you can not specify a size bigger than 4, but you can change it by adding `MAX_VARIABLE_TRACE_SIZE=x` to the end of the make command line. - -In order to actually detect changes to the variables you should call `VERIFY_TRACED_VARIABLES` around the code that you think that modifies the variable. If a variable is modified it will tell you between which two `VERIFY_TRACED_VARIABLES` calls the modification happened. You can then add more calls to track it down further. I don't recommend spamming the codebase with calls. It's better to start with a few, and then keep adding them in a binary search fashion. You can also delete the ones you don't need, as each call need to store the file name and line number in the ROM, so you can run out of memory if you add too many calls. - -Also remember to delete all the tracing code ones you have found the bug, as you wouldn't want to create a pull request with tracing code.