From 94f5f31f10a1e57378d6409287caf6473c2d02c4 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Mon, 13 Aug 2012 05:11:27 +0000 Subject: [PATCH] Upgrade Doxygen configuration files, custom style CSS and DOXYGEN build module for the latest Doxygen release. --- Bootloaders/CDC/Doxygen.conf | 64 +- Bootloaders/DFU/Doxygen.conf | 64 +- Bootloaders/HID/Doxygen.conf | 64 +- .../ClassDriver/AudioInput/Doxygen.conf | 64 +- .../ClassDriver/AudioOutput/Doxygen.conf | 64 +- .../DualVirtualSerial/Doxygen.conf | 64 +- .../ClassDriver/GenericHID/Doxygen.conf | 64 +- .../Device/ClassDriver/Joystick/Doxygen.conf | 64 +- .../Device/ClassDriver/Keyboard/Doxygen.conf | 64 +- .../ClassDriver/KeyboardMouse/Doxygen.conf | 64 +- .../KeyboardMouseMultiReport/Doxygen.conf | 64 +- Demos/Device/ClassDriver/MIDI/Doxygen.conf | 64 +- .../ClassDriver/MassStorage/Doxygen.conf | 64 +- .../MassStorageKeyboard/Doxygen.conf | 64 +- Demos/Device/ClassDriver/Mouse/Doxygen.conf | 64 +- .../ClassDriver/RNDISEthernet/Doxygen.conf | 64 +- .../ClassDriver/VirtualSerial/Doxygen.conf | 64 +- .../VirtualSerialMassStorage/Doxygen.conf | 64 +- .../VirtualSerialMouse/Doxygen.conf | 64 +- Demos/Device/LowLevel/AudioInput/Doxygen.conf | 64 +- .../Device/LowLevel/AudioOutput/Doxygen.conf | 64 +- .../LowLevel/DualVirtualSerial/Doxygen.conf | 64 +- Demos/Device/LowLevel/GenericHID/Doxygen.conf | 64 +- Demos/Device/LowLevel/Joystick/Doxygen.conf | 64 +- Demos/Device/LowLevel/Keyboard/Doxygen.conf | 64 +- .../LowLevel/KeyboardMouse/Doxygen.conf | 64 +- Demos/Device/LowLevel/MIDI/Doxygen.conf | 64 +- .../Device/LowLevel/MassStorage/Doxygen.conf | 64 +- Demos/Device/LowLevel/Mouse/Doxygen.conf | 64 +- .../LowLevel/RNDISEthernet/Doxygen.conf | 64 +- .../LowLevel/VirtualSerial/Doxygen.conf | 64 +- .../ClassDriver/MouseHostDevice/Doxygen.conf | 64 +- .../AndroidAccessoryHost/Doxygen.conf | 64 +- .../ClassDriver/AudioInputHost/Doxygen.conf | 64 +- .../ClassDriver/AudioOutputHost/Doxygen.conf | 64 +- .../JoystickHostWithParser/Doxygen.conf | 64 +- .../ClassDriver/KeyboardHost/Doxygen.conf | 64 +- .../KeyboardHostWithParser/Doxygen.conf | 64 +- Demos/Host/ClassDriver/MIDIHost/Doxygen.conf | 64 +- .../ClassDriver/MassStorageHost/Doxygen.conf | 64 +- Demos/Host/ClassDriver/MouseHost/Doxygen.conf | 64 +- .../MouseHostWithParser/Doxygen.conf | 64 +- .../Host/ClassDriver/PrinterHost/Doxygen.conf | 64 +- .../RNDISEthernetHost/Doxygen.conf | 64 +- .../ClassDriver/StillImageHost/Doxygen.conf | 64 +- .../VirtualSerialHost/Doxygen.conf | 64 +- .../AndroidAccessoryHost/Doxygen.conf | 64 +- .../Host/LowLevel/AudioInputHost/Doxygen.conf | 64 +- .../LowLevel/AudioOutputHost/Doxygen.conf | 64 +- .../Host/LowLevel/GenericHIDHost/Doxygen.conf | 64 +- .../JoystickHostWithParser/Doxygen.conf | 64 +- Demos/Host/LowLevel/KeyboardHost/Doxygen.conf | 64 +- .../KeyboardHostWithParser/Doxygen.conf | 64 +- Demos/Host/LowLevel/MIDIHost/Doxygen.conf | 64 +- .../LowLevel/MassStorageHost/Doxygen.conf | 64 +- Demos/Host/LowLevel/MouseHost/Doxygen.conf | 64 +- .../LowLevel/MouseHostWithParser/Doxygen.conf | 64 +- Demos/Host/LowLevel/PrinterHost/Doxygen.conf | 64 +- .../LowLevel/RNDISEthernetHost/Doxygen.conf | 64 +- .../Host/LowLevel/StillImageHost/Doxygen.conf | 64 +- .../LowLevel/VirtualSerialHost/Doxygen.conf | 64 +- LUFA/Build/lufa_doxygen.mk | 2 +- LUFA/Doxygen.conf | 66 +- LUFA/DoxygenPages/LUFAPoweredProjects.txt | 2 +- LUFA/DoxygenPages/Style/Style.css | 1112 +---------------- Projects/AVRISP-MKII/Doxygen.conf | 64 +- Projects/Benito/Doxygen.conf | 64 +- Projects/HIDReportViewer/Doxygen.conf | 64 +- Projects/LEDNotifier/Doxygen.conf | 64 +- Projects/MIDIToneGenerator/Doxygen.conf | 64 +- Projects/Magstripe/Doxygen.conf | 64 +- Projects/MediaController/Doxygen.conf | 64 +- Projects/MissileLauncher/Doxygen.conf | 64 +- Projects/RelayBoard/Doxygen.conf | 64 +- Projects/SerialToLCD/Doxygen.conf | 64 +- Projects/TempDataLogger/Doxygen.conf | 64 +- Projects/USBtoSerial/Doxygen.conf | 64 +- Projects/Webserver/Doxygen.conf | 64 +- Projects/XPLAINBridge/Doxygen.conf | 64 +- 79 files changed, 3084 insertions(+), 2898 deletions(-) diff --git a/Bootloaders/CDC/Doxygen.conf b/Bootloaders/CDC/Doxygen.conf index 915c510f63..a2f69e073e 100644 --- a/Bootloaders/CDC/Doxygen.conf +++ b/Bootloaders/CDC/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Bootloaders/DFU/Doxygen.conf b/Bootloaders/DFU/Doxygen.conf index d36ebbdcc4..01ac2dd91b 100644 --- a/Bootloaders/DFU/Doxygen.conf +++ b/Bootloaders/DFU/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Bootloaders/HID/Doxygen.conf b/Bootloaders/HID/Doxygen.conf index 0a84010c5d..f123a66b48 100644 --- a/Bootloaders/HID/Doxygen.conf +++ b/Bootloaders/HID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -908,13 +914,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -999,9 +1015,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf index 2518530804..3728ecc6fd 100644 --- a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf index ac4ec567d3..55889e7d34 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf index 601aa7f3ec..cab875e374 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf index 72f700ffc2..e0fc141220 100644 --- a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf +++ b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/Joystick/Doxygen.conf b/Demos/Device/ClassDriver/Joystick/Doxygen.conf index 4faa0a2900..bccaecef0c 100644 --- a/Demos/Device/ClassDriver/Joystick/Doxygen.conf +++ b/Demos/Device/ClassDriver/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf index 7b22771804..60aeb556f3 100644 --- a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf index d81fea44ee..b74685930b 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf index 0985bcfb84..7e4e2335ea 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/MIDI/Doxygen.conf b/Demos/Device/ClassDriver/MIDI/Doxygen.conf index 196b983894..f488758687 100644 --- a/Demos/Device/ClassDriver/MIDI/Doxygen.conf +++ b/Demos/Device/ClassDriver/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf index 0f8ba2e073..cedf6b0596 100644 --- a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf index 966b45852d..eb74361d91 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/Mouse/Doxygen.conf b/Demos/Device/ClassDriver/Mouse/Doxygen.conf index bbc8d87fdf..076dcfcd1c 100644 --- a/Demos/Device/ClassDriver/Mouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf index 121299762d..91b7bef5c6 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf index 56e12f23c4..ad20821ab9 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf index 68f9f11959..faff075768 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf index 8dd99d4bee..a7b82d4725 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/AudioInput/Doxygen.conf b/Demos/Device/LowLevel/AudioInput/Doxygen.conf index 2518530804..3728ecc6fd 100644 --- a/Demos/Device/LowLevel/AudioInput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf index ac4ec567d3..55889e7d34 100644 --- a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf index 601aa7f3ec..cab875e374 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/GenericHID/Doxygen.conf b/Demos/Device/LowLevel/GenericHID/Doxygen.conf index 72f700ffc2..e0fc141220 100644 --- a/Demos/Device/LowLevel/GenericHID/Doxygen.conf +++ b/Demos/Device/LowLevel/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/Joystick/Doxygen.conf b/Demos/Device/LowLevel/Joystick/Doxygen.conf index 4faa0a2900..bccaecef0c 100644 --- a/Demos/Device/LowLevel/Joystick/Doxygen.conf +++ b/Demos/Device/LowLevel/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/Keyboard/Doxygen.conf b/Demos/Device/LowLevel/Keyboard/Doxygen.conf index 7b22771804..60aeb556f3 100644 --- a/Demos/Device/LowLevel/Keyboard/Doxygen.conf +++ b/Demos/Device/LowLevel/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf index d81fea44ee..b74685930b 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/MIDI/Doxygen.conf b/Demos/Device/LowLevel/MIDI/Doxygen.conf index 196b983894..f488758687 100644 --- a/Demos/Device/LowLevel/MIDI/Doxygen.conf +++ b/Demos/Device/LowLevel/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/MassStorage/Doxygen.conf b/Demos/Device/LowLevel/MassStorage/Doxygen.conf index 0f8ba2e073..cedf6b0596 100644 --- a/Demos/Device/LowLevel/MassStorage/Doxygen.conf +++ b/Demos/Device/LowLevel/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/Mouse/Doxygen.conf b/Demos/Device/LowLevel/Mouse/Doxygen.conf index bbc8d87fdf..076dcfcd1c 100644 --- a/Demos/Device/LowLevel/Mouse/Doxygen.conf +++ b/Demos/Device/LowLevel/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf index 121299762d..91b7bef5c6 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf index 56e12f23c4..ad20821ab9 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf b/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf index c7228945da..71e6624bbf 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf index 18ee748c8a..74a76e3d89 100644 --- a/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf index 6645b195fe..b0349d65ac 100644 --- a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf index 9bdda1f1fd..a33f2ff3ff 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf index 749263b8b6..b39db93369 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf b/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf index 118e37f624..2a47367aa0 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf index 3659a85ab5..9bdd896202 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf b/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf index bce67fde89..c97cbe0305 100644 --- a/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf b/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf index 8b7fb2192c..b9b7fcf803 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/MouseHost/Doxygen.conf b/Demos/Host/ClassDriver/MouseHost/Doxygen.conf index a0158a3932..edad777c55 100644 --- a/Demos/Host/ClassDriver/MouseHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MouseHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf index 4bc2c0590c..d12eb33eba 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf b/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf index a2c5ee1f86..5e14886ecf 100644 --- a/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf b/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf index 7c4fc5ef0c..013e871792 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf b/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf index 518c26d4e3..ee37ac21f7 100644 --- a/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf b/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf index 2f58e77db6..999799fd19 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf index 18ee748c8a..74a76e3d89 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf index 6645b195fe..b0349d65ac 100644 --- a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf index 9bdda1f1fd..a33f2ff3ff 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf b/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf index f2953a56f7..a7c65be3df 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf +++ b/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf index 749263b8b6..b39db93369 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf index 118e37f624..2a47367aa0 100644 --- a/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf index 3659a85ab5..9bdd896202 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/MIDIHost/Doxygen.conf b/Demos/Host/LowLevel/MIDIHost/Doxygen.conf index bce67fde89..c97cbe0305 100644 --- a/Demos/Host/LowLevel/MIDIHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MIDIHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf b/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf index 8b7fb2192c..b9b7fcf803 100644 --- a/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/MouseHost/Doxygen.conf b/Demos/Host/LowLevel/MouseHost/Doxygen.conf index a0158a3932..edad777c55 100644 --- a/Demos/Host/LowLevel/MouseHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf index 4bc2c0590c..d12eb33eba 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/PrinterHost/Doxygen.conf b/Demos/Host/LowLevel/PrinterHost/Doxygen.conf index a2c5ee1f86..5e14886ecf 100644 --- a/Demos/Host/LowLevel/PrinterHost/Doxygen.conf +++ b/Demos/Host/LowLevel/PrinterHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf b/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf index 1b388b9f92..d1f6175575 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf +++ b/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/StillImageHost/Doxygen.conf b/Demos/Host/LowLevel/StillImageHost/Doxygen.conf index 518c26d4e3..ee37ac21f7 100644 --- a/Demos/Host/LowLevel/StillImageHost/Doxygen.conf +++ b/Demos/Host/LowLevel/StillImageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf b/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf index 2f58e77db6..999799fd19 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf +++ b/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/LUFA/Build/lufa_doxygen.mk b/LUFA/Build/lufa_doxygen.mk index 7f73343117..51123799fb 100644 --- a/LUFA/Build/lufa_doxygen.mk +++ b/LUFA/Build/lufa_doxygen.mk @@ -54,7 +54,7 @@ ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(s # Default values of optionally user-supplied variables DOXYGEN_CONF ?= Doxygen.conf DOXYGEN_FAIL_ON_WARNING ?= Y -DOXYGEN_OVERRIDE_PARAMS ?= QUIET=YES HTML_STYLESHEET=$(patsubst %/,%,$(LUFA_PATH))/DoxygenPages/Style/Style.css +DOXYGEN_OVERRIDE_PARAMS ?= QUIET=YES HTML_EXTRA_STYLESHEET=$(patsubst %/,%,$(LUFA_PATH))/DoxygenPages/Style/Style.css # Sanity check user supplied values $(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) diff --git a/LUFA/Doxygen.conf b/LUFA/Doxygen.conf index c199c9cc76..362e4c6b48 100644 --- a/LUFA/Doxygen.conf +++ b/LUFA/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -908,12 +914,22 @@ HTML_FOOTER = ./DoxygenPages/Style/Footer.htm # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. -HTML_STYLESHEET = ./DoxygenPages/Style/Style.css +HTML_EXTRA_STYLESHEET = ./DoxygenPages/Style/Style.css # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note @@ -999,9 +1015,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = com.lufa-lib.library.documentation diff --git a/LUFA/DoxygenPages/LUFAPoweredProjects.txt b/LUFA/DoxygenPages/LUFAPoweredProjects.txt index a4502bae01..97767f5c67 100644 --- a/LUFA/DoxygenPages/LUFAPoweredProjects.txt +++ b/LUFA/DoxygenPages/LUFAPoweredProjects.txt @@ -86,7 +86,7 @@ * \li Music Playing Alarm Clock (Tutorial): http://www.instructables.com/id/Music-Playing-Alarm-Clock/ * \li Nehebkau, Laptop Controlled Keyboard and Mouse: http://www.frank-zhao.com/cache/nehebkau.php * \li NeroJTAG, a JTAG dongle: https://github.com/makestuff/neroJtag - * \li NES Controller USB modification: http://projects.peterpolidoro.net/video/NESUSB.htm + * \li NES Controller USB modification: https://github.com/nfd/nes_adapter * \li Nikon wireless camera remote control (Norwegian): http://hekta.org/~hpe1119/ * \li Opendous-JTAG, an open source ARM JTAG debugger: http://code.google.com/p/opendous-jtag/ * \li Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/ diff --git a/LUFA/DoxygenPages/Style/Style.css b/LUFA/DoxygenPages/Style/Style.css index b1489e2a18..933215546f 100644 --- a/LUFA/DoxygenPages/Style/Style.css +++ b/LUFA/DoxygenPages/Style/Style.css @@ -1,1123 +1,93 @@ -@media print - { - #top - { - display:none; - } - - #side-nav - { - display:none; - } - - #nav-path - { - display:none; - } - - body - { - overflow:visible; - } - - h1,h2,h3,h4,h5,h6 - { - page-break-after:avoid; - } - - .summary - { - display:none; - } - - .memitem - { - page-break-inside:avoid; - } +/* ============================= */ +/* Page Header Formattings */ +/* ============================= */ +#titlearea { + background-color:#E1E7F4; + background-image:url('nav_f.png'); + background-repeat:repeat-x; + color:#20335A; + font-weight:bold; + text-shadow:0 1px 1px rgba(255, 255, 255, 0.9); +} - #doc-content - { - display:inline; - height:auto !important; - margin-left:0 !important; - overflow:inherit; - width:auto !important; - } - - .fragment - { - background-color: #FFFFFF !important; - } +#projectlogo { + padding-left: 10px; } -body,table,div,p,dl -{ +/* ============================= */ +/* General Text Formattings */ +/* ============================= */ +body,table,div,p,dl { font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif; font-size:13px; line-height:1.3; } -div.contents p -{ +div.header, div.contents p { padding-left:12px; } -div.contents table.memberdecls,.paramname -{ +/* ============================= */ +/* API Documentation Formattings */ +/* ============================= */ +div.contents table.memberdecls, .paramname { font-family:Consolas, Monaco, courier, sans-serif; font-size:105%; padding-right:20px; } -.title -{ - font-size:150%; - font-weight:bold; - margin:10px 2px; +/* ============================= */ +/* HTML Heading Formattings */ +/* ============================= */ +h1, h2, h3, h4 { + font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif; } -h1 -{ +h1 { font-size:25px; margin-bottom:10px; } -h2 -{ +h2 { color:#42657B; - font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif; font-size:17px; } -h3 -{ - font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif; +h3 { font-size:15px; } -h4 -{ - font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif; +h4 { font-size:13px; } -dt -{ - font-weight:bold; -} - -div.multicol -{ - -moz-column-count:3px; - -moz-column-gap:1em; - -webkit-column-count:3px; - -webkit-column-gap:1em; -} - -p.startli,p.startdd,p.starttd -{ - margin-top:2px; -} - -p.endli -{ - margin-bottom:0; -} - -p.enddd -{ - margin-bottom:4px; -} - -p.endtd -{ - margin-bottom:2px; -} - -caption -{ - font-weight:bold; -} - -span.legend -{ - font-size:70%; - text-align:center; -} - -h3.version -{ - font-size:90%; - text-align:center; -} - -div.qindex,div.navtab -{ - background-color:#EAEFF7; - border:1px solid #9EB3DC; - text-align:center; -} - -div.qindex,div.navpath -{ - line-height:140%; - width:100%; -} - -div.navtab -{ - margin-right:15px; -} - -a -{ - color:#355594; - font-weight:normal; - text-decoration:none; -} - -.contents a:visited -{ - color:#3D62AB; -} - -a:hover -{ - text-decoration:underline; -} - -a.qindex -{ - font-weight:bold; -} - -a.qindexHL -{ - background-color:#97ADD9; - border:1px double #7F9BD1; - color:#ffffff; - font-weight:bold; -} - -.contents a.qindexHL:visited -{ - color:#ffffff; -} - -a.el -{ - font-weight:bold; -} - -a.code,a.code:visited -{ - color:#4665A2; -} - -a.codeRef,a.codeRef:visited -{ - color:#4665A2; -} - -dl.el -{ - margin-left:-1cm; -} - -pre.fragment { - border: 1px solid #C4CFE5; - background-color: #FBFCFD; - padding: 4px 6px; - margin: 4px 8px 4px 2px; - overflow: auto; - word-wrap: break-word; - font-size: 9pt; - line-height: 125%; - font-family: monospace, fixed; - font-size: 105%; -} - -div.fragment { - padding: 4px; - margin: 4px; - background-color: #FBFCFD; - border: 1px solid #C4CFE5; -} - -div.line { - font-family: monospace, fixed; - font-size: 13px; - min-height: 13px; - line-height: 1.0; - text-wrap: unrestricted; - white-space: -moz-pre-wrap; /* Moz */ - white-space: -pre-wrap; /* Opera 4-6 */ - white-space: -o-pre-wrap; /* Opera 7 */ - white-space: pre-wrap; /* CSS3 */ - word-wrap: break-word; /* IE 5.5+ */ - text-indent: -53px; - padding-left: 53px; - padding-bottom: 0px; - margin: 0px; -} - -span.lineno { - padding-right: 4px; - text-align: right; - border-right: 2px solid #0F0; - background-color: #E8E8E8; - white-space: pre; -} -span.lineno a { - background-color: #D8D8D8; -} - -span.lineno a:hover { - background-color: #C8C8C8; -} - -div.ah -{ - -moz-border-radius:.5em; - -moz-box-shadow:rgba(0, 0, 0, 0.15) 2px 2px 2px; - -webkit-border-radius:.5em; - -webkit-box-shadow:2px 2px 3px #999; - background-color:black; - background-image:0; - border:solid thin #333; - border-radius:0.5em; - box-shadow:2px 2px 3px #999; - color:#ffffff; - font-weight:bold; - margin-bottom:3px; - margin-top:3px; - padding:0.2em; -} - -div.groupHeader -{ - font-weight:bold; - margin-left:16px; - margin-top:12px; -} - -div.groupText -{ - font-style:italic; - margin-left:16px; -} - -body -{ - background-color:white; - color:black; - margin:0; -} - -div.contents -{ - margin-left:8px; - margin-right:8px; - margin-top:10px; -} - -td.indexkey -{ - background-color:#EAEFF7; - border:1px solid #C1CEE8; - font-weight:bold; - margin:2px 0; - padding:2px 10px; - vertical-align:top; - white-space:nowrap; -} - -td.indexvalue -{ - background-color:#EAEFF7; - border:1px solid #C1CEE8; - margin:2px 0; - padding:2px 10px; -} - -tr.memlist -{ - background-color:#EDF1F8; -} - -p.formulaDsp -{ - text-align:center; -} - -img.formulaInl -{ - vertical-align:middle; -} - -div.center -{ - margin-bottom:0; - margin-top:0; - padding:0; - text-align:center; -} - -div.center img -{ - border:0; -} - -address.footer -{ - padding-right:12px; - text-align:right; -} - -img.footer -{ - border:0; - vertical-align:middle; -} - -span.keyword -{ +/* ============================= */ +/* Code Snippet Formattings */ +/* ============================= */ +span.keyword { color:#008000; } -span.keywordtype -{ +span.keywordtype { color:#604020; } -span.keywordflow -{ +span.keywordflow { color:#e08000; } -span.comment -{ +span.comment { color:#008000; } -span.preprocessor -{ +span.preprocessor { color:#806020; } -span.stringliteral -{ +span.stringliteral { color:#002080; } -span.charliteral -{ +span.charliteral { color:#008080; } - -span.vhdldigit -{ - color:#ff00ff; -} - -span.vhdlchar -{ - color:#000000; -} - -span.vhdlkeyword -{ - color:#700070; -} - -span.vhdllogic -{ - color:#ff0000; -} - -blockquote -{ - background-color:#F6F8FC; - border-left:2px solid #97ADD9; - margin:0 24px 0 4px; - padding:0 12px 0 16px; -} - -td.tiny -{ - font-size:75%; -} - -.dirtab -{ - border:1px solid #9EB3DC; - border-collapse:collapse; - padding:4px; -} - -th.dirtab -{ - background:#EAEFF7; - font-weight:bold; -} - -hr -{ - border:none; - border-top:1px solid #4067B4; - height:0; -} - -hr.footer -{ - height:1px; -} - -table.memberdecls -{ - border-spacing:0; - padding:0; -} - -.mdescLeft,.mdescRight,.memItemLeft,.memItemRight,.memTemplItemLeft,.memTemplItemRight,.memTemplParams -{ - background-color:#F9FAFC; - border:none; - margin:4px; - padding:1px 0 0 8px; -} - -.mdescLeft,.mdescRight -{ - color:#555; - padding:0 8px 4px; -} - -.memItemLeft,.memItemRight,.memTemplParams -{ - border-top:1px solid #C1CEE8; -} - -.memItemLeft,.memTemplItemLeft -{ - white-space:nowrap; -} - -.memItemRight -{ - width:100%; -} - -.memTemplParams -{ - color:#3D62AB; - white-space:nowrap; -} - -.memtemplate -{ - color:#3D62AB; - font-size:80%; - font-weight:normal; - margin-left:9px; -} - -.memnav -{ - background-color:#EAEFF7; - border:1px solid #9EB3DC; - margin:2px 15px 2px 2px; - padding:2px; - text-align:center; -} - -.mempage -{ - width:100%; -} - -.memitem -{ - margin-bottom:10px; - margin-right:5px; - padding:0; -} - -.memname -{ - font-weight:bold; - margin-left:6px; - white-space:nowrap; -} - -.memproto,dl.reflist dt -{ - -moz-border-radius-topleft:8px; - -moz-border-radius-topright:8px; - -moz-box-shadow:rgba(0, 0, 0, 0.15) 5px 5px 5px; - -webkit-border-top-left-radius:8px; - -webkit-border-top-right-radius:8px; - -webkit-box-shadow:5px 5px 5px rgba(0, 0, 0, 0.15); - background-color:#E1E7F4; - background-image:url('nav_f.png'); - background-repeat:repeat-x; - border-left:1px solid #A3B7DE; - border-right:1px solid #A3B7DE; - border-top:1px solid #A3B7DE; - border-top-left-radius:8px; - border-top-right-radius:8px; - box-shadow:5px 5px 5px rgba(0, 0, 0, 0.15); - color:#20335A; - font-weight:bold; - padding:6px 0; - text-shadow:0 1px 1px rgba(255, 255, 255, 0.9); -} - -.memdoc,dl.reflist dd -{ - -moz-border-radius-bottomleft:8px; - -moz-border-radius-bottomright:8px; - -moz-box-shadow:rgba(0, 0, 0, 0.15) 5px 5px 5px; - -webkit-border-bottom-left-radius:8px; - -webkit-border-bottom-right-radius:8px; - -webkit-box-shadow:5px 5px 5px rgba(0, 0, 0, 0.15); - background-color:#FBFCFD; - background-image:0 color-stop(0.6,#FFFFFF), color-stop(0.60,#FFFFFF), color-stop(0.95,#F6F8FC), to(#EDF1F8)); - border-bottom:1px solid #A3B7DE; - border-bottom-left-radius:8px; - border-bottom-right-radius:8px; - border-left:1px solid #A3B7DE; - border-right:1px solid #A3B7DE; - border-top-width:0; - box-shadow:5px 5px 5px rgba(0, 0, 0, 0.15); - padding:2px 5px; -} - -dl.reflist dt -{ - padding:5px; -} - -dl.reflist dd -{ - margin:0 0 10px; - padding:5px; -} - -.paramkey -{ - text-align:right; -} - -.paramtype -{ - white-space:nowrap; -} - -.paramname -{ - color:#602020; - white-space:nowrap; -} - -.paramname em -{ - font-style:normal; -} - -.params,.retval,.exception,.tparams -{ - border-spacing:6px 2px; -} - -.params .paramname,.retval .paramname -{ - font-weight:bold; - vertical-align:top; -} - -.params .paramtype -{ - font-style:italic; - vertical-align:top; -} - -.params .paramdir -{ - font-family:"courier new",courier,monospace; - vertical-align:top; -} - -.ftvtree -{ - font-family:sans-serif; - margin:0; -} - -.directory -{ - font-size:9pt; - font-weight:bold; - margin:5px; -} - -.directory h3 -{ - font-size:11pt; - margin:1em 0 0; -} - -.directory > h3 -{ - margin-top:0; -} - -.directory p -{ - margin:0; - white-space:nowrap; -} - -.directory div -{ - display:none; - margin:0; -} - -.directory img -{ - vertical-align:-30%; -} - -.directory-alt -{ - font-size:100%; - font-weight:bold; -} - -.directory-alt h3 -{ - font-size:11pt; - margin:1em 0 0; -} - -.directory-alt > h3 -{ - margin-top:0; -} - -.directory-alt p -{ - margin:0; - white-space:nowrap; -} - -.directory-alt div -{ - display:none; - margin:0; -} - -.directory-alt img -{ - vertical-align:-30%; -} - -div.dynheader -{ - margin-top:8px; -} - -address -{ - color:#253B67; - font-style:normal; -} - -table.doxtable -{ - border-collapse:collapse; - margin-bottom:4px; - margin-top:4px; -} - -table.doxtable td,table.doxtable th -{ - border:1px solid #273F6D; - padding:3px 7px 2px; -} - -table.doxtable th -{ - background-color:#304D86; - color:#FFFFFF; - font-size:110%; - padding-bottom:4px; - padding-top:5px; -} - -table.fieldtable -{ - -moz-border-radius:4px; - -moz-box-shadow:rgba(0, 0, 0, 0.15) 2px 2px 2px; - -webkit-border-radius:4px; - -webkit-box-shadow:2px 2px 2px rgba(0, 0, 0, 0.15); - border:1px solid #A3B7DE; - border-radius:4px; - border-spacing:0; - box-shadow:2px 2px 2px rgba(0, 0, 0, 0.15); - margin-bottom:10px; - width:100%; -} - -.fieldtable td,.fieldtable th -{ - padding:3px 7px 2px; -} - -.fieldtable td.fieldtype,.fieldtable td.fieldname -{ - border-bottom:1px solid #A3B7DE; - border-right:1px solid #A3B7DE; - vertical-align:top; - white-space:nowrap; -} - -.fieldtable td.fielddoc -{ - border-bottom:1px solid #A3B7DE; - width:100%; -} - -.fieldtable tr:last-child td -{ - border-bottom:none; -} - -.fieldtable th -{ - -moz-border-radius-topleft:4px; - -moz-border-radius-topright:4px; - -webkit-border-top-left-radius:4px; - -webkit-border-top-right-radius:4px; - background-color:#E1E7F4; - background-image:url('nav_f.png'); - background-repeat:repeat-x; - border-bottom:1px solid #A3B7DE; - border-top-left-radius:4px; - border-top-right-radius:4px; - color:#20335A; - font-size:90%; - padding-bottom:4px; - padding-top:5px; - text-align:left; -} - -.tabsearch -{ - background-image:url('tab_b.png'); - font-size:13px; - height:36px; - left:10px; - overflow:hidden; - top:0; - z-index:101; -} - -.navpath ul -{ - background-image:url('tab_b.png'); - background-repeat:repeat-x; - border:solid 1px #BFCCE8; - color:#839ED2; - font-size:11px; - height:30px; - line-height:30px; - margin:0; - overflow:hidden; - padding:0; -} - -.navpath li -{ - background-image:url('bc_s.png'); - background-position:right; - background-repeat:no-repeat; - color:#2F4B83; - float:left; - list-style-type:none; - padding-left:10px; - padding-right:15px; -} - -.navpath li.navelem a -{ - display:block; - height:32px; - outline:none; - text-decoration:none; -} - -.navpath li.navelem a:hover -{ - color:#6081C5; -} - -.navpath li.footer -{ - background-image:none; - background-position:right; - background-repeat:no-repeat; - color:#2F4B83; - float:right; - font-size:8pt; - list-style-type:none; - padding-left:10px; - padding-right:15px; -} - -div.summary -{ - float:right; - font-size:8pt; - padding-right:5px; - text-align:right; - width:50%; -} - -div.summary a -{ - white-space:nowrap; -} - -div.ingroups -{ - font-size:8pt; - margin-left:5px; - padding-left:5px; - text-align:left; - width:50%; -} - -div.ingroups a -{ - white-space:nowrap; -} - -div.header -{ - background-color:#F9FAFC; - background-image:url('nav_h.png'); - background-repeat:repeat-x; - border-bottom:1px solid #C1CEE8; - margin:0; -} - -div.headertitle -{ - padding:5px 5px 5px 7px; -} - -dl -{ - padding:0 0 0 10px; -} - -dl.section -{ - border-left:4px solid; - padding:0 0 0 6px; -} - -dl.note -{ - border-color:#D0C000; -} - -dl.warning,dl.attention -{ - border-color:#FF0000; -} - -dl.pre,dl.post,dl.invariant -{ - border-color:#00D000; -} - -dl.deprecated -{ - border-color:#505050; -} - -dl.todo -{ - border-color:#00C0E0; -} - -dl.test -{ - border-color:#3030E0; -} - -dl.bug -{ - border-color:#C08050; -} - -dl.section dd -{ - margin-bottom:6px; -} - -#projectlogo -{ - border-collapse:separate; - text-align:center; - vertical-align:bottom; - padding-left: 20px; -} - -#projectlogo img -{ - border:0 none; -} - -#projectname -{ - font:280% Arial, sans-serif; - margin:0; - padding-left:20px; -} - -#projectbrief -{ - font:120% Tahoma, Arial, sans-serif; - margin:0; - padding:0; -} - -#projectnumber:before -{ - content:"Version "; -} - -#projectnumber -{ - font:50% Tahoma, Arial, sans-serif; - margin:0; - padding:0; -} - -#titlearea -{ - margin:0; - padding:0; - width:100%; - background-color:#E1E7F4; - background-image:url('nav_f.png'); - background-repeat:repeat-x; - color:#20335A; - font-weight:bold; - text-shadow:0 1px 1px rgba(255, 255, 255, 0.9); -} - -.image -{ - text-align:center; -} - -.dotgraph -{ - text-align:center; -} - -.mscgraph -{ - text-align:center; -} - -.caption -{ - font-weight:bold; -} - -div.zoom -{ - border:1px solid #8AA3D4; -} - -dl.citelist -{ - margin-bottom:50px; -} - -dl.citelist dt -{ - color:#2C477C; - float:left; - font-weight:bold; - margin-right:10px; - padding:5px; -} - -dl.citelist dd -{ - margin:2px 0; - padding:5px 0; -} - -div.toc -{ - background-color:#F4F6FB; - border:1px solid #D6DFF0; - border-radius:7px 7px 7px 7px; - float:right; - height:auto; - margin:0 20px 10px 10px; - padding:14px 25px; - width:200px; -} - -div.toc li -{ - background:url("bdwn.png") no-repeat scroll 0 5px transparent; - font:10px/1.2 Verdana,DejaVu Sans,Geneva,sans-serif; - margin-top:5px; - padding-left:10px; - padding-top:2px; -} - -div.toc h3 -{ - border-bottom:0 none; - color:#3D62AB; - font:bold 12px/1.2 Arial,FreeSans,sans-serif; - margin:0; -} - -div.toc ul -{ - border:medium none; - list-style:none outside none; - padding:0; -} - -div.toc li.level1 -{ - margin-left:0; -} - -div.toc li.level2 -{ - margin-left:15px; -} - -div.toc li.level3 -{ - margin-left:30px; -} - -div.toc li.level4 -{ - margin-left:45px; -} diff --git a/Projects/AVRISP-MKII/Doxygen.conf b/Projects/AVRISP-MKII/Doxygen.conf index 51656db1a4..4e9bea1eb1 100644 --- a/Projects/AVRISP-MKII/Doxygen.conf +++ b/Projects/AVRISP-MKII/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/Benito/Doxygen.conf b/Projects/Benito/Doxygen.conf index d89541e57b..23b8ca946b 100644 --- a/Projects/Benito/Doxygen.conf +++ b/Projects/Benito/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/HIDReportViewer/Doxygen.conf b/Projects/HIDReportViewer/Doxygen.conf index e96c47f132..71c806a22b 100644 --- a/Projects/HIDReportViewer/Doxygen.conf +++ b/Projects/HIDReportViewer/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/LEDNotifier/Doxygen.conf b/Projects/LEDNotifier/Doxygen.conf index 9b77d03c04..c68dadf0a6 100644 --- a/Projects/LEDNotifier/Doxygen.conf +++ b/Projects/LEDNotifier/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -910,13 +916,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -1001,9 +1017,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/MIDIToneGenerator/Doxygen.conf b/Projects/MIDIToneGenerator/Doxygen.conf index 1786fd7b24..dbe29cf552 100644 --- a/Projects/MIDIToneGenerator/Doxygen.conf +++ b/Projects/MIDIToneGenerator/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/Magstripe/Doxygen.conf b/Projects/Magstripe/Doxygen.conf index eb5fb2e77a..98223a99ca 100644 --- a/Projects/Magstripe/Doxygen.conf +++ b/Projects/Magstripe/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/MediaController/Doxygen.conf b/Projects/MediaController/Doxygen.conf index 40ebf9133c..2e7b86d0dd 100644 --- a/Projects/MediaController/Doxygen.conf +++ b/Projects/MediaController/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/MissileLauncher/Doxygen.conf b/Projects/MissileLauncher/Doxygen.conf index 4454d2934e..9f69179f10 100644 --- a/Projects/MissileLauncher/Doxygen.conf +++ b/Projects/MissileLauncher/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/RelayBoard/Doxygen.conf b/Projects/RelayBoard/Doxygen.conf index 66909d09dd..30ba4a18d7 100644 --- a/Projects/RelayBoard/Doxygen.conf +++ b/Projects/RelayBoard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/SerialToLCD/Doxygen.conf b/Projects/SerialToLCD/Doxygen.conf index a04837b861..943f490a18 100644 --- a/Projects/SerialToLCD/Doxygen.conf +++ b/Projects/SerialToLCD/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/TempDataLogger/Doxygen.conf b/Projects/TempDataLogger/Doxygen.conf index 04859f62be..4d5fa41880 100644 --- a/Projects/TempDataLogger/Doxygen.conf +++ b/Projects/TempDataLogger/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -908,13 +914,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -999,9 +1015,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/USBtoSerial/Doxygen.conf b/Projects/USBtoSerial/Doxygen.conf index 836a38b9d4..a2e0e263a2 100644 --- a/Projects/USBtoSerial/Doxygen.conf +++ b/Projects/USBtoSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/Webserver/Doxygen.conf b/Projects/Webserver/Doxygen.conf index 522a05511d..5e8f0b4cd6 100644 --- a/Projects/Webserver/Doxygen.conf +++ b/Projects/Webserver/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -908,13 +914,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -999,9 +1015,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher diff --git a/Projects/XPLAINBridge/Doxygen.conf b/Projects/XPLAINBridge/Doxygen.conf index 7478e0eec4..955edf340a 100644 --- a/Projects/XPLAINBridge/Doxygen.conf +++ b/Projects/XPLAINBridge/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -136,7 +136,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -239,14 +241,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -259,6 +262,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -279,12 +289,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -372,7 +377,8 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -907,13 +913,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -998,9 +1014,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher