From 9e39b222d0105b55c84a8301958d69209a3319fb Mon Sep 17 00:00:00 2001 From: tmk Date: Tue, 9 Apr 2013 14:17:31 +0900 Subject: [PATCH] Add new build options to adb_usb --- converter/adb_usb/Makefile | 19 ++++- converter/adb_usb/Makefile.lufa | 131 ++++++++++++++++++++++++++++++++ converter/adb_usb/keymap.c | 1 - converter/adb_usb/matrix.c | 1 - protocol/pjrc/usb.c | 1 + 5 files changed, 148 insertions(+), 5 deletions(-) create mode 100644 converter/adb_usb/Makefile.lufa diff --git a/converter/adb_usb/Makefile b/converter/adb_usb/Makefile index 87b0f415b8..09f30180a8 100644 --- a/converter/adb_usb/Makefile +++ b/converter/adb_usb/Makefile @@ -32,12 +32,25 @@ MCU = atmega32u4 # Teensy 2.0 F_CPU = 16000000 +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + # Build Options # comment out to disable the options. # -#MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -#NKRO_ENABLE = yes # USB Nkey Rollover +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +#MOUSEKEY_ENABLE = yes # Mouse keys(+5000) +#EXTRAKEY_ENABLE = yes # Audio control and System control(+600) +#CONSOLE_ENABLE = yes # Console for debug +#COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover(+500) # Search Path diff --git a/converter/adb_usb/Makefile.lufa b/converter/adb_usb/Makefile.lufa new file mode 100644 index 0000000000..372ef6c09a --- /dev/null +++ b/converter/adb_usb/Makefile.lufa @@ -0,0 +1,131 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = adb_usb_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap.c \ + matrix.c \ + led.c \ + adb.c + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/converter/adb_usb/keymap.c b/converter/adb_usb/keymap.c index 5d42980d55..a1574b1ab3 100644 --- a/converter/adb_usb/keymap.c +++ b/converter/adb_usb/keymap.c @@ -21,7 +21,6 @@ along with this program. If not, see . #include #include #include -#include "usb_keyboard.h" #include "keycode.h" #include "print.h" #include "debug.h" diff --git a/converter/adb_usb/matrix.c b/converter/adb_usb/matrix.c index 9b26a2a187..a616d10e40 100644 --- a/converter/adb_usb/matrix.c +++ b/converter/adb_usb/matrix.c @@ -71,7 +71,6 @@ void matrix_init(void) // initialize matrix state: all keys off for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - print_enable = true; debug_enable = true; debug_matrix = true; debug_keyboard = true; diff --git a/protocol/pjrc/usb.c b/protocol/pjrc/usb.c index a9fbc4638e..14df9efdda 100644 --- a/protocol/pjrc/usb.c +++ b/protocol/pjrc/usb.c @@ -31,6 +31,7 @@ #include "usb_mouse.h" #include "usb_debug.h" #include "usb_extra.h" +#include "led.h" #include "print.h" #include "util.h" #include "sleep_led.h"