confirm SetReport LED.

pull/12/head
tmk 13 years ago
parent f2ebac101d
commit a112f3614e

@ -138,6 +138,7 @@ static uint8_t command_common(void)
}
break;
case KB_S:
print("host_keyboard_leds:"); phex(host_keyboard_leds()); print("\n");
#ifdef HOST_PJRC
print("UDCON: "); phex(UDCON); print("\n");
print("UDIEN: "); phex(UDIEN); print("\n");

@ -168,13 +168,16 @@ void host_mouse_send(report_mouse_t *report)
void host_system_send(uint16_t data)
{
static uint16_t last_data = 0;
if (data == last_data) return;
last_data = data;
if (!driver) return;
(*driver->send_system)(data);
}
void host_consumer_send(uint16_t data)
{
// TODO: this is needed?
static uint16_t last_data = 0;
if (data == last_data) return;
last_data = data;

@ -111,7 +111,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------------------'
*/
KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, \
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NLCK,\
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \
NO, LGUI,LALT,SPC, RALT,NO, NO, NO, RCTL),

@ -1,3 +1,10 @@
/*
* Copyright 2012 Jun Wako <wakojun@gmail.com>
* This file is based on:
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
*/
/*
LUFA Library
Copyright (C) Dean Camera, 2012.

@ -46,13 +46,12 @@
#include "descriptor.h"
#include "lufa.h"
static uint8_t idle_duration = 0;
static uint8_t protocol_report = 1;
static uint8_t keyboard_led_stats = 0;
// TODO: impl Control Request GET_REPORT
static report_keyboard_t keyboard_report_sent;
#ifdef MOUSE_ENABLE
static report_mouse_t mouse_report_sent;
#endif
/* Host driver */
static uint8_t keyboard_leds(void);
@ -83,12 +82,8 @@ int main(void)
debug_keyboard = true;
debug_mouse = true;
/* TODO: can't print here
_delay_ms(5000);
USB_USBTask();
print("abcdefg\n");
USB_USBTask();
*/
// TODO: can't print here
debug("LUFA init\n");
keyboard_init();
host_set_driver(&lufa_driver);
@ -228,19 +223,6 @@ void EVENT_USB_Device_ControlRequest(void)
ReportData = (uint8_t*)&keyboard_report_sent;
ReportSize = sizeof(keyboard_report_sent);
break;
#ifdef MOUSE_ENABLE
case MOUSE_INTERFACE:
// TODO: test/check
ReportData = (uint8_t*)&mouse_report_sent;
ReportSize = sizeof(mouse_report_sent);
break;
#endif
#ifdef EXTRAKEY_ENABLE
case EXTRA_INTERFACE:
break;
#endif
case CONSOLE_INTERFACE:
break;
}
/* Write the report data to the control endpoint */
@ -252,35 +234,65 @@ void EVENT_USB_Device_ControlRequest(void)
case HID_REQ_SetReport:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
/* Wait until the LED report has been sent by the host */
while (!(Endpoint_IsOUTReceived()))
{
if (USB_DeviceState == DEVICE_STATE_Unattached)
return;
}
// Interface
switch (USB_ControlRequest.wIndex) {
case KEYBOARD_INTERFACE:
// TODO: test/check
/* Read in the LED report from the host */
Endpoint_ClearSETUP();
while (!(Endpoint_IsOUTReceived())) {
if (USB_DeviceState == DEVICE_STATE_Unattached)
return;
}
keyboard_led_stats = Endpoint_Read_8();
break;
#ifdef MOUSE_ENABLE
case MOUSE_INTERFACE:
break;
#endif
#ifdef EXTRAKEY_ENABLE
case EXTRA_INTERFACE:
break;
#endif
case CONSOLE_INTERFACE:
Endpoint_ClearOUT();
Endpoint_ClearStatusStage();
break;
}
Endpoint_ClearOUT();
}
break;
case HID_REQ_GetProtocol:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()));
Endpoint_Write_8(protocol_report);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
}
break;
case HID_REQ_SetProtocol:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
protocol_report = ((USB_ControlRequest.wValue & 0xFF) != 0x00);
}
break;
case HID_REQ_SetIdle:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
idle_duration = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
}
break;
case HID_REQ_GetIdle:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
Endpoint_ClearSETUP();
while (!(Endpoint_IsINReady()));
Endpoint_Write_8(idle_duration);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
}
@ -329,23 +341,17 @@ static void send_mouse(report_mouse_t *report)
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
}
mouse_report_sent = *report;
#endif
}
typedef struct {
uint8_t report_id;
uint16_t usage;
} __attribute__ ((packed)) report_extra_t;
static void send_system(uint16_t data)
{
report_extra_t r = {
.report_id = REPORT_ID_SYSTEM,
.usage = data
};
Endpoint_SelectEndpoint(EXTRA_IN_EPNUM);
if (Endpoint_IsReadWriteAllowed()) {
report_extra_t r = {
.report_id = REPORT_ID_SYSTEM,
.usage = data
};
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
}
@ -353,12 +359,12 @@ static void send_system(uint16_t data)
static void send_consumer(uint16_t data)
{
report_extra_t r = {
.report_id = REPORT_ID_CONSUMER,
.usage = data
};
Endpoint_SelectEndpoint(EXTRA_IN_EPNUM);
if (Endpoint_IsReadWriteAllowed()) {
report_extra_t r = {
.report_id = REPORT_ID_CONSUMER,
.usage = data
};
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
}

@ -1,3 +1,10 @@
/*
* Copyright 2012 Jun Wako <wakojun@gmail.com>
* This file is based on:
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
* LUFA-120219/Demos/Device/Lowlevel/GenericHID
*/
/*
LUFA Library
Copyright (C) Dean Camera, 2012.
@ -32,7 +39,6 @@
#ifndef _LUFA_H_
#define _LUFA_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
@ -42,4 +48,11 @@
#include <LUFA/Version.h>
#include <LUFA/Drivers/USB/USB.h>
/* extra report structure */
typedef struct {
uint8_t report_id;
uint16_t usage;
} __attribute__ ((packed)) report_extra_t;
#endif

Loading…
Cancel
Save