diff --git a/Dockerfile b/Dockerfile index 6bd5acb335..c4acfec71a 100644 --- a/Dockerfile +++ b/Dockerfile @@ -26,4 +26,4 @@ VOLUME /qmk_firmware WORKDIR /qmk_firmware COPY . . -CMD make $KEYBOARD:$KEYMAP +CMD make clean ; make git-submodule ; make $KEYBOARD:$KEYMAP diff --git a/docs/custom_quantum_functions.md b/docs/custom_quantum_functions.md index 655fa1578e..418faf3494 100644 --- a/docs/custom_quantum_functions.md +++ b/docs/custom_quantum_functions.md @@ -235,7 +235,7 @@ This example, running after everything else has initialized, sets up the rgb und void keyboard_post_init_user(void) { // Call the post init code. rgblight_enable_noeeprom(); // enables Rgb, without saving settings - rgblight_sethsv_noeeprom(180, 255, 255): // sets the color to teal/cyan without saving + rgblight_sethsv_noeeprom(180, 255, 255); // sets the color to teal/cyan without saving rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING + 3); // sets mode to Fast breathing without saving } ``` @@ -342,7 +342,7 @@ This is an example of how to add settings, and read and write it. We're using th In your keymap.c file, add this to the top: -``` +```c typedef union { uint32_t raw; struct { @@ -358,7 +358,7 @@ This sets up a 32 bit structure that we can store settings with in memory, and w We're using `rgb_layer_change`, for the `layer_state_set_*` function, and use `keyboard_post_init_user` and `process_record_user` to configure everything. Now, using the `keyboard_post_init_user` code above, you want to add `eeconfig_read_user()` to it, to populate the structure you've just created. And you can then immediately use this structure to control functionality in your keymap. And It should look like: -``` +```c void keyboard_post_init_user(void) { // Call the keymap level matrix init. @@ -375,7 +375,7 @@ void keyboard_post_init_user(void) { ``` The above function will use the EEPROM config immediately after reading it, to set the default layer's RGB color. The "raw" value of it is converted in a usable structure based on the "union" that you created above. -``` +```c uint32_t layer_state_set_user(uint32_t state) { switch (biton32(state)) { case _RAISE: @@ -397,8 +397,8 @@ uint32_t layer_state_set_user(uint32_t state) { return state; } ``` -This will cause the RGB underglow to be changed ONLY if the value was enabled. Now to configure this value, create a new keycode for `process_record_user` called `RGB_LYR` and `EPRM`. Additionally, we want to make sure that if you use the normal RGB codes, that it turns off Using the example above, make it look this: -``` +This will cause the RGB underglow to be changed ONLY if the value was enabled. Now to configure this value, create a new keycode for `process_record_user` called `RGB_LYR`. Additionally, we want to make sure that if you use the normal RGB codes, that it turns off Using the example above, make it look this: +```c bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { @@ -415,11 +415,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { PLAY_NOTE_ARRAY(tone_qwerty); } return true; // Let QMK send the enter press/release events - case EPRM: - if (record->event.pressed) { - eeconfig_init(); // resets the EEPROM to default - } - return false; case RGB_LYR: // This allows me to use underglow as layer indication, or as normal if (record->event.pressed) { user_config.rgb_layer_change ^= 1; // Toggles the status @@ -442,9 +437,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } } ``` -And lastly, you want to add the `eeconfig_init_user` function, so that when the EEPROM is reset, you can specify default values, and even custom actions. For example, if you want to set rgb layer indication by default, and save the default valued. +And lastly, you want to add the `eeconfig_init_user` function, so that when the EEPROM is reset, you can specify default values, and even custom actions. To force an EEPROM reset, use the `EEP_RST` keycode or [Bootmagic](feature_bootmagic.md) functionallity. For example, if you want to set rgb layer indication by default, and save the default valued. -``` +```c void eeconfig_init_user(void) { // EEPROM is getting reset! user_config.raw = 0; user_config.rgb_layer_change = true; // We want this enabled by default diff --git a/docs/feature_debounce_type.md b/docs/feature_debounce_type.md index 5d4343f08b..38eca3f37c 100644 --- a/docs/feature_debounce_type.md +++ b/docs/feature_debounce_type.md @@ -33,7 +33,10 @@ The debounce code is compatible with split keyboards. # Changing between included debouncing methods You can either use your own code, by including your own debounce.c, or switch to another included one. Included debounce methods are: -* eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` millseconds of no further input for that key +* eager_pr - debouncing per row. On any state change, response is immediate, followed by locking the row ```DEBOUNCE_DELAY``` milliseconds of no further input for that row. +For use in keyboards where refreshing ```NUM_KEYS``` 8-bit counters is computationally expensive / low scan rate, and fingers usually only hit one row at a time. This could be +appropriate for the ErgoDox models; the matrix is rotated 90°, and hence its "rows" are really columns, and each finger only hits a single "row" at a time in normal use. +* eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` milliseconds of no further input for that key * sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE_DELAY``` milliseconds of no changes has occured, all input changes are pushed. diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 8d1efb12a2..ec12189545 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -10,39 +10,45 @@ If you want to use single color LED's you should use the [LED Matrix Subsystem]( There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`: - RGB_MATRIX_ENABLE = IS31FL3731 +```C +RGB_MATRIX_ENABLE = IS31FL3731 +``` Configure the hardware via your `config.h`: - // This is a 7-bit address, that gets left-shifted and bit 0 - // set to 0 for write, 1 for read (as per I2C protocol) - // The address will vary depending on your wiring: - // 0b1110100 AD <-> GND - // 0b1110111 AD <-> VCC - // 0b1110101 AD <-> SCL - // 0b1110110 AD <-> SDA - #define DRIVER_ADDR_1 0b1110100 - #define DRIVER_ADDR_2 0b1110110 - - #define DRIVER_COUNT 2 - #define DRIVER_1_LED_TOTAL 25 - #define DRIVER_2_LED_TOTAL 24 - #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL +```C +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 0b1110100 AD <-> GND +// 0b1110111 AD <-> VCC +// 0b1110101 AD <-> SCL +// 0b1110110 AD <-> SDA +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110110 + +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 25 +#define DRIVER_2_LED_TOTAL 24 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL +``` Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations. Define these arrays listing all the LEDs in your `.c`: - const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { - /* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, C1_3, C2_3, C3_3}, - .... - } +```C +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C1_3, C2_3, C3_3}, + .... +} +``` Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now). @@ -50,60 +56,70 @@ Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet] There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`: - RGB_MATRIX_ENABLE = IS31FL3733 +```C +RGB_MATRIX_ENABLE = IS31FL3733 +``` Configure the hardware via your `config.h`: - // This is a 7-bit address, that gets left-shifted and bit 0 - // set to 0 for write, 1 for read (as per I2C protocol) - // The address will vary depending on your wiring: - // 00 <-> GND - // 01 <-> SCL - // 10 <-> SDA - // 11 <-> VCC - // ADDR1 represents A1:A0 of the 7-bit address. - // ADDR2 represents A3:A2 of the 7-bit address. - // The result is: 0b101(ADDR2)(ADDR1) - #define DRIVER_ADDR_1 0b1010000 - #define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. - - #define DRIVER_COUNT 2 - #define DRIVER_1_LED_TOTAL 64 - #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +```C +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b101(ADDR2)(ADDR1) +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. + +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 64 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +``` Currently only a single drivers is supported, but it would be trivial to support all 4 combinations. For now define `DRIVER_ADDR_2` as `DRIVER_ADDR_1` Define these arrays listing all the LEDs in your `.c`: - const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { - /* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, B_1, A_1, C_1}, - .... - } +```C +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, B_1, A_1, C_1}, + .... +} +``` Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now). From this point forward the configuration is the same for all the drivers. - const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { - /* {row | col << 4} - * | {x=0..224, y=0..64} - * | | modifier - * | | | */ - {{0|(0<<4)}, {20.36*0, 21.33*0}, 1}, - {{0|(1<<4)}, {20.36*1, 21.33*0}, 1}, - .... - } +```C +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { +/* {row | col << 4} + * | {x=0..224, y=0..64} + * | | modifier + * | | | */ + {{0|(0<<4)}, {20.36*0, 21.33*0}, 1}, + {{0|(1<<4)}, {20.36*1, 21.33*0}, 1}, + .... +} +``` The format for the matrix position used in this array is `{row | (col << 4)}`. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64. The easiest way to calculate these positions is: - x = 224 / ( NUMBER_OF_COLS - 1 ) * ROW_POSITION - y = 64 / (NUMBER_OF_ROWS - 1 ) * COL_POSITION +```C +x = 224 / ( NUMBER_OF_COLS - 1 ) * ROW_POSITION +y = 64 / (NUMBER_OF_ROWS - 1 ) * COL_POSITION +``` Where all variables are decimels/floats. @@ -113,48 +129,50 @@ Where all variables are decimels/floats. All RGB keycodes are currently shared with the RGBLIGHT system: - * `RGB_TOG` - toggle - * `RGB_MOD` - cycle through modes - * `RGB_HUI` - increase hue - * `RGB_HUD` - decrease hue - * `RGB_SAI` - increase saturation - * `RGB_SAD` - decrease saturation - * `RGB_VAI` - increase value - * `RGB_VAD` - decrease value - * `RGB_SPI` - increase speed effect (no EEPROM support) - * `RGB_SPD` - decrease speed effect (no EEPROM support) - - - * `RGB_MODE_*` keycodes will generally work, but are not currently mapped to the correct effects for the RGB Matrix system +* `RGB_TOG` - toggle +* `RGB_MOD` - cycle through modes +* `RGB_HUI` - increase hue +* `RGB_HUD` - decrease hue +* `RGB_SAI` - increase saturation +* `RGB_SAD` - decrease saturation +* `RGB_VAI` - increase value +* `RGB_VAD` - decrease value +* `RGB_SPI` - increase speed effect (no EEPROM support) +* `RGB_SPD` - decrease speed effect (no EEPROM support) +* `RGB_MODE_*` keycodes will generally work, but are not currently mapped to the correct effects for the RGB Matrix system ## RGB Matrix Effects -These are the effects that are currently available: - - enum rgb_matrix_effects { - RGB_MATRIX_SOLID_COLOR = 1, - RGB_MATRIX_ALPHAS_MODS, - RGB_MATRIX_DUAL_BEACON, - RGB_MATRIX_GRADIENT_UP_DOWN, - RGB_MATRIX_RAINDROPS, - RGB_MATRIX_CYCLE_ALL, - RGB_MATRIX_CYCLE_LEFT_RIGHT, - RGB_MATRIX_CYCLE_UP_DOWN, - RGB_MATRIX_RAINBOW_BEACON, - RGB_MATRIX_RAINBOW_PINWHEELS, - RGB_MATRIX_RAINBOW_MOVING_CHEVRON, - RGB_MATRIX_JELLYBEAN_RAINDROPS, - RGB_MATRIX_DIGITAL_RAIN, - #ifdef RGB_MATRIX_KEYPRESSES - RGB_MATRIX_SOLID_REACTIVE, - RGB_MATRIX_REACTIVE_SIMPLE, - RGB_MATRIX_SPLASH, - RGB_MATRIX_MULTISPLASH, - RGB_MATRIX_SOLID_SPLASH, - RGB_MATRIX_SOLID_MULTISPLASH, - #endif - RGB_MATRIX_EFFECT_MAX - }; +All effects have been configured to support current configuration values (Hue, Saturation, Value, & Speed) unless otherwise noted below. These are the effects that are currently available: + +```C +enum rgb_matrix_effects { + RGB_MATRIX_NONE = 0, + RGB_MATRIX_SOLID_COLOR = 1, // Static single hue, no speed support + RGB_MATRIX_ALPHAS_MODS, // Static dual hue, speed is hue for secondary hue + RGB_MATRIX_GRADIENT_UP_DOWN, // Static gradient top to bottom, speed controls how much gradient changes + RGB_MATRIX_BREATHING, // Single hue brightness cycling animation + RGB_MATRIX_CYCLE_ALL, // Full keyboard solid hue cycling through full gradient + RGB_MATRIX_CYCLE_LEFT_RIGHT, // Full gradient scrolling left to right + RGB_MATRIX_CYCLE_UP_DOWN, // Full gradient scrolling top to bottom + RGB_MATRIX_RAINBOW_MOVING_CHEVRON, // Full gradent Chevron shapped scrolling left to right + RGB_MATRIX_DUAL_BEACON, // Full gradient spinning around center of keyboard + RGB_MATRIX_RAINBOW_BEACON, // Full tighter gradient spinning around center of keyboard + RGB_MATRIX_RAINBOW_PINWHEELS, // Full dual gradients spinning two halfs of keyboard + RGB_MATRIX_RAINDROPS, // Randomly changes a single key's hue + RGB_MATRIX_JELLYBEAN_RAINDROPS, // Randomly changes a single key's hue and saturation + RGB_MATRIX_DIGITAL_RAIN, // That famous computer simulation +#if defined(RGB_MATRIX_KEYPRESSES) || defined(RGB_MATRIX_KEYRELEASES) + RGB_MATRIX_SOLID_REACTIVE_SIMPLE, // Pulses keys hit to hue & value then fades value out + RGB_MATRIX_SOLID_REACTIVE, // Static single hue, pulses keys hit to shifted hue then fades to current hue + RGB_MATRIX_SPLASH, // Full gradient & value pulse away from a single key hit then fades value out + RGB_MATRIX_MULTISPLASH, // Full gradient & value pulse away from multiple key hits then fades value out + RGB_MATRIX_SOLID_SPLASH, // Hue & value pulse away from a single key hit then fades value out + RGB_MATRIX_SOLID_MULTISPLASH, // Hue & value pulse away from multiple key hits then fades value out +#endif + RGB_MATRIX_EFFECT_MAX +}; +``` You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`: @@ -162,19 +180,20 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |Define |Description | |---------------------------------------------------|--------------------------------------------| |`#define DISABLE_RGB_MATRIX_ALPHAS_MODS` |Disables `RGB_MATRIX_ALPHAS_MODS` | -|`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | |`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Disables `RGB_MATRIX_GRADIENT_UP_DOWN` | -|`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` | +|`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` | |`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | |`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | |`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | +|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`| +|`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | |`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` | |`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Disables `RGB_MATRIX_RAINBOW_PINWHEELS` | -|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`| +|`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` | |`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS` |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS` | |`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN` |Disables `RGB_MATRIX_DIGITAL_RAIN` | |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE` |Disables `RGB_MATRIX_SOLID_REACTIVE` | -|`#define DISABLE_RGB_MATRIX_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_REACTIVE_SIMPLE` | +|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLEE`| |`#define DISABLE_RGB_MATRIX_SPLASH` |Disables `RGB_MATRIX_SPLASH` | |`#define DISABLE_RGB_MATRIX_MULTISPLASH` |Disables `RGB_MATRIX_MULTISPLASH` | |`#define DISABLE_RGB_MATRIX_SOLID_SPLASH` |Disables `RGB_MATRIX_SOLID_SPLASH` | @@ -185,26 +204,33 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con Custom layer effects can be done by defining this in your `.c`: - void rgb_matrix_indicators_kb(void) { - rgb_matrix_set_color(index, red, green, blue); - } +```C +void rgb_matrix_indicators_kb(void) { + rgb_matrix_set_color(index, red, green, blue); +} +``` A similar function works in the keymap as `rgb_matrix_indicators_user`. ## Additional `config.h` Options - #define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) - #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) - #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects - #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended - #define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) if not defined defaults to 1 - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +```C +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses +#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +#define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +``` ## EEPROM storage The EEPROM for it is currently shared with the RGBLIGHT system (it's generally assumed only one RGB would be used at a time), but could be configured to use its own 32bit address with: - #define EECONFIG_RGB_MATRIX (uint32_t *)16 +```C +#define EECONFIG_RGB_MATRIX (uint32_t *)16 +``` Where `16` is an unused index from `eeconfig.h`. @@ -212,12 +238,14 @@ Where `16` is an unused index from `eeconfig.h`. To use the suspend feature, add this to your `.c`: - void suspend_power_down_kb(void) - { - rgb_matrix_set_suspend_state(true); - } - - void suspend_wakeup_init_kb(void) - { - rgb_matrix_set_suspend_state(false); - } +```C +void suspend_power_down_kb(void) +{ + rgb_matrix_set_suspend_state(true); +} + +void suspend_wakeup_init_kb(void) +{ + rgb_matrix_set_suspend_state(false); +} +``` diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index 9ecc0deb5c..c9323deb5e 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -125,6 +125,8 @@ The following options can be used to tweak the various animations: You can also modify the speeds that the different modes animate at: +Here is a quick demo on Youtube (with NPKC KC60) (https://www.youtube.com/watch?v=VKrpPAHlisY). + ```c // How long (in milliseconds) to wait between animation steps for each of the "Solid color breathing" animations const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5}; diff --git a/docs/getting_started_build_tools.md b/docs/getting_started_build_tools.md index 1f771b1a04..b72f52e189 100644 --- a/docs/getting_started_build_tools.md +++ b/docs/getting_started_build_tools.md @@ -2,6 +2,8 @@ This page describes setting up the build environment for QMK. These instructions cover AVR processors (such as the atmega32u4). +After cloning the repo of QMK run `make git-submodule` once to download 3rd party libraries like ChibiOS. + Note: If it is your first time here, Check out the "Complete Newbs guide" instead diff --git a/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c b/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c index 48350a53e0..39473f6067 100644 --- a/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c +++ b/keyboards/1upkeyboards/1up60hse/keymaps/default/keymap.c @@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_LCTL + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL ), [1] = LAYOUT_60_ansi( diff --git a/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c b/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c index 7fefebd0b1..359ac75406 100644 --- a/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c +++ b/keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c @@ -21,9 +21,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(1), - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_LGUI, KC_LALT, KC_LCTL), - + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL), + [1] = LAYOUT_tsangan( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_CAPS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_CLR, diff --git a/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c b/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c index 7658087d1f..5312e3b675 100644 --- a/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c +++ b/keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c @@ -21,9 +21,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(1), - KC_NO, KC_LALT, KC_LGUI, KC_SPC, KC_LGUI, KC_LALT, KC_NO), - + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_NO, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_NO), + [1] = LAYOUT_tsangan( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_CAPS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_CLR, diff --git a/keyboards/atomic/readme.md b/keyboards/atomic/readme.md index ab2fa4a239..0561c4fea5 100644 --- a/keyboards/atomic/readme.md +++ b/keyboards/atomic/readme.md @@ -3,7 +3,7 @@ Atomic ![Atomic](http://i.imgur.com/3gNDJAh.jpg) -A compact 60% (15x5) ortholinear keyboard kit made and sold by OLKB. [More info on qmk.fm](http://qmk.fm/atomic/) +A compact 60% (15x5) ortholinear keyboard kit made and sold by OLKB. Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert) Hardware Supported: Atomic PCB rev1, Teensy 2.0 diff --git a/keyboards/claw44/claw44.c b/keyboards/claw44/claw44.c new file mode 100644 index 0000000000..f564fb623b --- /dev/null +++ b/keyboards/claw44/claw44.c @@ -0,0 +1,10 @@ +#include "claw44.h" +#include "ssd1306.h" + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { +#ifdef SSD1306OLED + return process_record_gfx(keycode,record) && process_record_user(keycode, record); +#else + return process_record_user(keycode, record); +#endif +} diff --git a/keyboards/claw44/claw44.h b/keyboards/claw44/claw44.h new file mode 100644 index 0000000000..4ca25fcb2b --- /dev/null +++ b/keyboards/claw44/claw44.h @@ -0,0 +1,5 @@ +#pragma once + +#ifdef KEYBOARD_claw44_rev1 + #include "rev1.h" +#endif diff --git a/keyboards/claw44/config.h b/keyboards/claw44/config.h new file mode 100644 index 0000000000..fb1cdf3962 --- /dev/null +++ b/keyboards/claw44/config.h @@ -0,0 +1,28 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" +#include + +#define USE_I2C +#define USE_SERIAL + +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/claw44/i2c.c b/keyboards/claw44/i2c.c new file mode 100644 index 0000000000..4bee5c6398 --- /dev/null +++ b/keyboards/claw44/i2c.c @@ -0,0 +1,162 @@ +#include +#include +#include +#include +#include +#include +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1< slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1< + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency 400kHz +#define SCL_CLOCK 400000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/claw44/keymaps/default/config.h b/keyboards/claw44/keymaps/default/config.h new file mode 100644 index 0000000000..eff6ad3c7b --- /dev/null +++ b/keyboards/claw44/keymaps/default/config.h @@ -0,0 +1,35 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +//#define USE_MATRIX_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +#define TAPPING_TERM 200 diff --git a/keyboards/claw44/keymaps/default/keymap.c b/keyboards/claw44/keymaps/default/keymap.c new file mode 100644 index 0000000000..c346571255 --- /dev/null +++ b/keyboards/claw44/keymaps/default/keymap.c @@ -0,0 +1,169 @@ +#include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + +#define KC_ KC_TRNS +#define KC_RST RESET +#define KC_L_SPC LT(_LOWER, KC_SPC) // lower +#define KC_R_ENT LT(_RAISE, KC_ENT) // raise +#define KC_G_JA LGUI_T(KC_LANG1) // cmd or win +#define KC_G_EN LGUI_T(KC_LANG2) // cmd or win +#define KC_C_BS LCTL_T(KC_BSPC) // ctrl +#define KC_A_DEL ALT_T(KC_DEL) // alt + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT( \ + //,--------+--------+---------+--------+---------+--------. ,--------+---------+--------+---------+--------+--------. + KC_ESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_MINS, + //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------| + KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, + //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------| + KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, + //`--------+--------+---------+--------+---------+--------/ \--------+---------+--------+---------+--------+--------' + KC_A_DEL, KC_G_EN, KC_L_SPC, KC_C_BS, KC_C_BS, KC_R_ENT, KC_G_JA, KC_A_DEL + // `----------+--------+---------+--------' `--------+---------+--------+---------' + ), + + // \ ^ ! & | @ = + * % - + // ( # $ " ' ~ ← ↓ ↑ → ` ) + // { [ ] } + + [_RAISE] = LAYOUT( \ + //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. + _______, KC_BSLS, KC_CIRC, KC_EXLM, KC_AMPR, KC_PIPE, KC_AT , KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, KC_LCBR, KC_LBRC, KC_RBRC, KC_RCBR, _______, _______, _______, _______, + //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' + _______, _______, _______, _______, _______, _______, _______, RESET + // `--------+--------+--------+--------' `--------+--------+--------+--------' + ), + + [_LOWER] = LAYOUT( \ + //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. + KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , _______, KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______, + //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------' + RESET , _______, _______, _______, _______, _______, _______, _______ + // `--------+--------+--------+--------' `--------+--------+--------+--------' + ), +}; + +void matrix_init_user(void) { + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +// const char *read_mode_icon(bool swap); +// const char *read_host_led_state(void); +// void set_timelog(void); +// const char *read_timelog(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); + //matrix_write_ln(matrix, read_host_led_state()); + //matrix_write_ln(matrix, read_timelog()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + // set_timelog(); + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + } else { + layer_off(_LOWER); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + } else { + layer_off(_RAISE); + } + return false; + break; + } + return true; +} diff --git a/keyboards/claw44/keymaps/yfuku/config.h b/keyboards/claw44/keymaps/yfuku/config.h new file mode 100644 index 0000000000..244ffa7096 --- /dev/null +++ b/keyboards/claw44/keymaps/yfuku/config.h @@ -0,0 +1,36 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +//#define USE_MATRIX_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED + +#define USE_SERIAL_PD2 + +#define TAPPING_TERM 180 +#define IGNORE_MOD_TAP_INTERRUPT diff --git a/keyboards/claw44/keymaps/yfuku/keymap.c b/keyboards/claw44/keymaps/yfuku/keymap.c new file mode 100644 index 0000000000..77d459b928 --- /dev/null +++ b/keyboards/claw44/keymaps/yfuku/keymap.c @@ -0,0 +1,221 @@ +#include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE +}; + +enum macro_keycodes { + KC_SAMPLEMACRO, +}; + +// common +#define KC_ KC_TRNS +#define KC_XXXX KC_NO +#define KC_RST RESET +#define KC_VD KC__VOLDOWN +#define KC_VU KC__VOLUP + +// layer +#define KC_L_SPC LT(_LOWER, KC_SPC) +#define KC_R_ENT LT(_RAISE, KC_ENT) + +// shift_t +#define KC_S_TAB LSFT_T(KC_TAB) +#define KC_S_ESC LSFT_T(KC_ESC) +#define KC_S_JA LSFT_T(KC_LANG1) +#define KC_S_EN LSFT_T(KC_LANG2) + +// cmd_t +#define KC_M_F LCMD_T(KC_F) +#define KC_M_D LCMD_T(KC_D) +#define KC_M_J LCMD_T(KC_J) +#define KC_M_K LCMD_T(KC_K) + +// ctl_t +#define KC_C_S LCTL_T(KC_S) +#define KC_C_L LCTL_T(KC_L) +#define KC_C_BS LCTL_T(KC_BSPC) + +// alt_t +#define KC_A_D ALT_T(KC_D) +#define KC_A_K ALT_T(KC_K) +#define KC_A_Z ALT_T(KC_Z) +#define KC_A_SL ALT_T(KC_SLSH) +#define KC_A_DEL ALT_T(KC_DEL) + +// cmd+shift_t +#define KC_MS_Q SCMD_T(KC_Q) +#define KC_MS_A SCMD_T(KC_A) +#define KC_MS_S SCMD_T(KC_S) +#define KC_MS_SC SCMD_T(KC_SCLN) +#define KC_MS_ESC SCMD_T(KC_ESC) + +// +#define KC_MR RCMD(KC_R) +#define KC_MF RCMD(KC_F) +#define KC_MW RCMD(KC_W) +#define KC_MX RCMD(KC_X) +#define KC_MC RCMD(KC_C) +#define KC_MV RCMD(KC_V) +#define KC_MTAB RCMD(KC_TAB) +#define KC_MSF RCMD(RSFT(KC_F)) +#define KC_MSR RCMD(RSFT(KC_R)) +#define KC_MST RCMD(RSFT(KC_T)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // M_ = LCMD_T( + // A_ = ALT_T( + // C_ = LCTL_T( + // MS_ = SMD_T( + // R_ = LT(_RAISE + // L_ = LT(_LOWER + + [_QWERTY] = LAYOUT_kc( \ + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + ESC , Q , W , E , R , T , Y , U , I , O , P ,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + S_TAB, A ,C_S , D ,M_F , G , H ,M_J , K ,C_L ,SCLN,S_ESC, + //|----+----+----+----+----+----+ |----+----+----+----+----+----| + , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, , + //`----+----+----+----+----+----/ \----+----+----+----+----+----' + A_DEL,S_EN,L_SPC,C_BS, C_BS,R_ENT,S_JA,A_DEL + // `----+----+----+----' `----+----+----+----' + ), + + // \ ^ ! & | @ = + * % - + // ( # $ " ' ~ ← ↓ ↑ → ` ) + // { [ ] } + + [_RAISE] = LAYOUT_kc( \ + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + ,BSLS,CIRC,EXLM,AMPR,PIPE, AT ,EQL ,PLUS,ASTR,PERC,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + LPRN,HASH,DLR ,DQT ,QUOT,TILD, LEFT,DOWN, UP ,RGHT,GRV ,RPRN, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , ,LCBR,LBRC, RBRC,RCBR, , , , , + //`----+----+----+----+----+----/ \----+----+----+----+----+----' + , ,BSPC, , , , ,RST + // `----+----+----+----' `----+----+----+----' + ), + + [_LOWER] = LAYOUT_kc( \ + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + , , ,MSF ,MSR ,MST , ,EQL ,PLUS,ASTR,PERC,MINS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , + //|----+----+----+----+----+----| |----+----+----+----+----+----| + , , , , , , , ,COMM,DOT ,SLSH, , + //`----+----+----+--+-+----+----/ \----+----+----+----+----+----' + RST , , , , ,DEL , , + // `----+----+----+----' `----+----+----+----' + ), +}; + +void matrix_init_user(void) { + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +// const char *read_mode_icon(bool swap); +// const char *read_host_led_state(void); +// void set_timelog(void); +// const char *read_timelog(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + // If you want to change the display of OLED, you need to change here + matrix_write_ln(matrix, read_layer_state()); + matrix_write_ln(matrix, read_keylog()); + matrix_write_ln(matrix, read_keylogs()); + //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui)); + //matrix_write_ln(matrix, read_host_led_state()); + //matrix_write_ln(matrix, read_timelog()); + } else { + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef SSD1306OLED + set_keylog(keycode, record); +#endif + // set_timelog(); + } + + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + } else { + layer_off(_LOWER); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + } else { + layer_off(_RAISE); + } + return false; + break; + } + return true; +} + diff --git a/keyboards/claw44/lib/glcdfont.c b/keyboards/claw44/lib/glcdfont.c new file mode 100644 index 0000000000..91f53d9c24 --- /dev/null +++ b/keyboards/claw44/lib/glcdfont.c @@ -0,0 +1,243 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include + #include +#elif defined(ESP8266) + #include +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font +const unsigned char font[] PROGMEM = { +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, +0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, +0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, +0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, +0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, +0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, +0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, +0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, +0x00, 0x18, 0x24, 0x18, 0x00, 0x00, +0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, +0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, +0x26, 0x29, 0x79, 0x29, 0x26, 0x00, +0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, +0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, +0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, +0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, +0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, +0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, +0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, +0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, +0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, +0x60, 0x60, 0x60, 0x60, 0x60, 0x00, +0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, +0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, +0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, +0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, +0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, +0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, +0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, +0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, +0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, +0x00, 0x07, 0x00, 0x07, 0x00, 0x00, +0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, +0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, +0x23, 0x13, 0x08, 0x64, 0x62, 0x00, +0x36, 0x49, 0x56, 0x20, 0x50, 0x00, +0x00, 0x08, 0x07, 0x03, 0x00, 0x00, +0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, +0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, +0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, +0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, +0x00, 0x80, 0x70, 0x30, 0x00, 0x00, +0x08, 0x08, 0x08, 0x08, 0x08, 0x00, +0x00, 0x00, 0x60, 0x60, 0x00, 0x00, +0x20, 0x10, 0x08, 0x04, 0x02, 0x00, +0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, +0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, +0x72, 0x49, 0x49, 0x49, 0x46, 0x00, +0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, +0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, +0x27, 0x45, 0x45, 0x45, 0x39, 0x00, +0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, +0x41, 0x21, 0x11, 0x09, 0x07, 0x00, +0x36, 0x49, 0x49, 0x49, 0x36, 0x00, +0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, +0x00, 0x00, 0x14, 0x00, 0x00, 0x00, +0x00, 0x40, 0x34, 0x00, 0x00, 0x00, +0x00, 0x08, 0x14, 0x22, 0x41, 0x00, +0x14, 0x14, 0x14, 0x14, 0x14, 0x00, +0x00, 0x41, 0x22, 0x14, 0x08, 0x00, +0x02, 0x01, 0x59, 0x09, 0x06, 0x00, +0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, +0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, +0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, +0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, +0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, +0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, +0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, +0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, +0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, +0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, +0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, +0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, +0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, +0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, +0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, +0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, +0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, +0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, +0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, +0x26, 0x49, 0x49, 0x49, 0x32, 0x00, +0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, +0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, +0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, +0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, +0x63, 0x14, 0x08, 0x14, 0x63, 0x00, +0x03, 0x04, 0x78, 0x04, 0x03, 0x00, +0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, +0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, +0x02, 0x04, 0x08, 0x10, 0x20, 0x00, +0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, +0x04, 0x02, 0x01, 0x02, 0x04, 0x00, +0x40, 0x40, 0x40, 0x40, 0x40, 0x00, +0x00, 0x03, 0x07, 0x08, 0x00, 0x00, +0x20, 0x54, 0x54, 0x78, 0x40, 0x00, +0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, +0x38, 0x44, 0x44, 0x44, 0x28, 0x00, +0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, +0x38, 0x54, 0x54, 0x54, 0x18, 0x00, +0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, +0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, +0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, +0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, +0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, +0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, +0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, +0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, +0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, +0x38, 0x44, 0x44, 0x44, 0x38, 0x00, +0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, +0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, +0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, +0x48, 0x54, 0x54, 0x54, 0x24, 0x00, +0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, +0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, +0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, +0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, +0x44, 0x28, 0x10, 0x28, 0x44, 0x00, +0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, +0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, +0x00, 0x08, 0x36, 0x41, 0x00, 0x00, +0x00, 0x00, 0x77, 0x00, 0x00, 0x00, +0x00, 0x41, 0x36, 0x08, 0x00, 0x00, +0x02, 0x01, 0x02, 0x04, 0x02, 0x00, +0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFC, 0xFC, 0xFC, 0xFC, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, + 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0xC0, 0xF0, 0xF8, 0xF8, + 0xF8, 0xF8, 0xF8, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0xE0, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, +0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, +0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, +0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, +0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, +0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, +0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, +0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xF8, 0xFC, 0xFE, + 0xFF, 0x1F, 0x07, 0x07, 0x07, 0x07, + 0x1F, 0x1F, 0x1F, 0x1E, 0x18, 0x00, + 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, + 0x00, 0x00, 0x00, 0x9E, 0xDF, 0xDF, + 0xCF, 0xC7, 0xE7, 0xE7, 0xE7, 0xFF, + 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x03, + 0x3F, 0xFF, 0xFF, 0xFE, 0xC0, 0x00, + 0xF0, 0xFF, 0xFF, 0x1F, 0xFF, 0xFF, + 0xF0, 0x00, 0xC0, 0xFC, 0xFF, 0xFF, + 0x3F, 0x03, 0x00, 0xC0, 0xF0, 0xF8, + 0xFE, 0x9F, 0x87, 0x83, 0x80, 0xFF, + 0xFF, 0xFF, 0xFF, 0x80, 0x80, 0x00, + 0x00, 0xE0, 0xF8, 0xFC, 0xBF, 0x8F, + 0x83, 0x81, 0xFF, 0xFF, 0xFF, 0xFF, + 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, +0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, +0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, +0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, +0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, +0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, +0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, +0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x07, 0x1F, 0x3F, + 0x7F, 0x7C, 0x78, 0x70, 0x70, 0x78, + 0x7E, 0x3E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x7F, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x00, 0x1F, 0x3F, 0x7F, 0x7F, + 0x79, 0x71, 0x70, 0x30, 0x38, 0x3F, + 0x7F, 0x7F, 0x7F, 0x60, 0x00, 0x00, + 0x00, 0x01, 0x1F, 0x7F, 0x7F, 0x7E, + 0x7F, 0x1F, 0x01, 0x00, 0x01, 0x3F, + 0x7F, 0x7E, 0x7F, 0x7F, 0x0F, 0x01, + 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x7F, + 0x7F, 0x7F, 0x7F, 0x03, 0x03, 0x00, + 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, + 0x03, 0x03, 0x7F, 0x7F, 0x7F, 0x7F, + 0x07, 0x03, 0x03, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; +#endif // FONT5X7_H diff --git a/keyboards/claw44/lib/host_led_state_reader.c b/keyboards/claw44/lib/host_led_state_reader.c new file mode 100644 index 0000000000..980823b318 --- /dev/null +++ b/keyboards/claw44/lib/host_led_state_reader.c @@ -0,0 +1,15 @@ +#include +#include "claw44.h" + +char host_led_state_str[24]; + +const char *read_host_led_state(void) +{ + uint8_t leds = host_keyboard_leds(); + snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s", + (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ", + (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ", + (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "); + + return host_led_state_str; +} diff --git a/keyboards/claw44/lib/keylogger.c b/keyboards/claw44/lib/keylogger.c new file mode 100644 index 0000000000..092b6929bc --- /dev/null +++ b/keyboards/claw44/lib/keylogger.c @@ -0,0 +1,45 @@ +#include +#include "claw44.h" + +char keylog_str[24] = {}; +char keylogs_str[21] = {}; +int keylogs_str_idx = 0; + +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ', + ' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '}; + +void set_keylog(uint16_t keycode, keyrecord_t *record) { + char name = ' '; + if (keycode < 60) { + name = code_to_name[keycode]; + } + + // update keylog + snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", + record->event.key.row, record->event.key.col, + keycode, name); + + // update keylogs + if (keylogs_str_idx == sizeof(keylogs_str) - 1) { + keylogs_str_idx = 0; + for (int i = 0; i < sizeof(keylogs_str) - 1; i++) { + keylogs_str[i] = ' '; + } + } + + keylogs_str[keylogs_str_idx] = name; + keylogs_str_idx++; +} + +const char *read_keylog(void) { + return keylog_str; +} + +const char *read_keylogs(void) { + return keylogs_str; +} diff --git a/keyboards/claw44/lib/layer_state_reader.c b/keyboards/claw44/lib/layer_state_reader.c new file mode 100644 index 0000000000..d92b6df582 --- /dev/null +++ b/keyboards/claw44/lib/layer_state_reader.c @@ -0,0 +1,35 @@ + +#include QMK_KEYBOARD_H +#include +#include "claw44.h" + +#define L_BASE 0 +#define L_LOWER (1<<_LOWER) +#define L_RAISE (1<<_RAISE) +#define L_ADJUST (1<<_ADJUST) +#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) + +char layer_state_str[24]; + +const char *read_layer_state(void) { + switch (layer_state) + { + case L_BASE: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default"); + break; + case L_RAISE: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise"); + break; + case L_LOWER: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower"); + break; + case L_ADJUST: + case L_ADJUST_TRI: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust"); + break; + default: + snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state); + } + + return layer_state_str; +} diff --git a/keyboards/claw44/lib/logo_reader.c b/keyboards/claw44/lib/logo_reader.c new file mode 100644 index 0000000000..b5b437b2b8 --- /dev/null +++ b/keyboards/claw44/lib/logo_reader.c @@ -0,0 +1,11 @@ +#include "claw44.h" + +const char *read_logo(void) { + static char logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, + 0}; + + return logo; +} diff --git a/keyboards/claw44/lib/mode_icon_reader.c b/keyboards/claw44/lib/mode_icon_reader.c new file mode 100644 index 0000000000..a9272bb9a7 --- /dev/null +++ b/keyboards/claw44/lib/mode_icon_reader.c @@ -0,0 +1,15 @@ +#include +#include "claw44.h" + +char mode_icon[24]; + +const char *read_mode_icon(bool swap) { + static char logo[][2][3] = {{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}}; + if (swap == false) { + snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[0][0], logo[0][1]); + } else { + snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[1][0], logo[1][1]); + } + + return mode_icon; +} diff --git a/keyboards/claw44/lib/rgb_state_reader.c b/keyboards/claw44/lib/rgb_state_reader.c new file mode 100644 index 0000000000..e0efe2e528 --- /dev/null +++ b/keyboards/claw44/lib/rgb_state_reader.c @@ -0,0 +1,15 @@ +#ifdef RGBLIGHT_ENABLE + +#include QMK_KEYBOARD_H +#include + +extern rgblight_config_t rgblight_config; +char rbf_info_str[24]; +const char *read_rgb_info(void) { + + snprintf(rbf_info_str, sizeof(rbf_info_str), "%s %2d h%3d s%3d v%3d", + rgblight_config.enable ? "on" : "- ", rgblight_config.mode, + rgblight_config.hue, rgblight_config.sat, rgblight_config.val); + return rbf_info_str; +} +#endif diff --git a/keyboards/claw44/lib/timelogger.c b/keyboards/claw44/lib/timelogger.c new file mode 100644 index 0000000000..ecd4ed3ea8 --- /dev/null +++ b/keyboards/claw44/lib/timelogger.c @@ -0,0 +1,16 @@ +#include +#include "claw44.h" + +char timelog_str[24] = {}; +int last_time = 0; +int elapsed_time = 0; + +void set_timelog(void) { + elapsed_time = timer_elapsed(last_time); + last_time = timer_read(); + snprintf(timelog_str, sizeof(timelog_str), "lt:%5d, et:%5d", last_time, elapsed_time); +} + +const char *read_timelog(void) { + return timelog_str; +} diff --git a/keyboards/claw44/readme.md b/keyboards/claw44/readme.md new file mode 100644 index 0000000000..7e72e08971 --- /dev/null +++ b/keyboards/claw44/readme.md @@ -0,0 +1,15 @@ +# Claw44 + +![Claw44](https://i.imgur.com/5a8iogl.jpg) + +A split keyboard with 3x6 vertically staggered keys and 4 thumb keys. + +Keyboard Maintainer: [@yfuku_](https://twitter.com/yfuku_) +Hardware Supported: Claw44 PCB, ProMicro +Hardware Availability: https://yfuku.booth.pm/ + +Make example for this keyboard (after setting up your build environment): + + make claw44:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/claw44/rev1/config.h b/keyboards/claw44/rev1/config.h new file mode 100644 index 0000000000..ba2ed4559e --- /dev/null +++ b/keyboards/claw44/rev1/config.h @@ -0,0 +1,76 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER yfuku +#define PRODUCT claw44 +#define DESCRIPTION A split keyboard with 3x6 vertically staggered keys and 4 thumb keys + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 7 +#define MATRIX_ROW_PINS { D4, C6, D7, E6 } + +// wiring of each half +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } +// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* ws2812 RGB LED */ +/* +#define RGB_DI_PIN D3 + +#define RGBLED_NUM 12 // Number of LEDs +*/ + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/claw44/rev1/matrix.c b/keyboards/claw44/rev1/matrix.c new file mode 100644 index 0000000000..718cc57448 --- /dev/null +++ b/keyboards/claw44/rev1/matrix.c @@ -0,0 +1,357 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" + +#ifdef USE_MATRIX_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "split_scomm.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; +uint8_t is_master = 0 ; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); +static uint8_t matrix_master_scan(void); + + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + TXLED0; + RXLED0; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + is_master = has_usb(); + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_MATRIX_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(int master_changed) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; +#ifdef SERIAL_USE_MULTI_TRANSACTION + int ret=serial_update_buffers(master_changed); +#else + int ret=serial_update_buffers(); +#endif + if (ret ) { + if(ret==2) RXLED1; + return 1; + } + RXLED0; + memcpy(&matrix[slaveOffset], + (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH); + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + if (is_master) { + matrix_master_scan(); + }else{ + matrix_slave_scan(); + int offset = (isLeftHand) ? ROWS_PER_HAND : 0; + memcpy(&matrix[offset], + (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH); + matrix_scan_quantum(); + } + return 1; +} + + +uint8_t matrix_master_scan(void) { + + int ret = _matrix_scan(); + int mchanged = 1; + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_MATRIX_I2C +// for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ +// i2c_slave_buffer[i] = matrix[offset+i]; +// } +#else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + mchanged = memcmp((void *)serial_master_buffer, + &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); + #endif + memcpy((void *)serial_master_buffer, + &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH); +#endif + +#ifdef USE_MATRIX_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction(mchanged) ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + matrix_scan_quantum(); + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_MATRIX_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + int change = 0; + #endif + for (int i = 0; i < ROWS_PER_HAND; ++i) { + #ifdef SERIAL_USE_MULTI_TRANSACTION + if( serial_slave_buffer[i] != matrix[offset+i] ) + change = 1; + #endif + serial_slave_buffer[i] = matrix[offset+i]; + } + #ifdef SERIAL_USE_MULTI_TRANSACTION + slave_buffer_change_count += change; + #endif +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/claw44/rev1/rev1.c b/keyboards/claw44/rev1/rev1.c new file mode 100644 index 0000000000..9529636f56 --- /dev/null +++ b/keyboards/claw44/rev1/rev1.c @@ -0,0 +1,8 @@ +#include "claw44.h" + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + //led_set_user(usb_led); +} +#endif diff --git a/keyboards/claw44/rev1/rev1.h b/keyboards/claw44/rev1/rev1.h new file mode 100644 index 0000000000..f7ec2cbfe6 --- /dev/null +++ b/keyboards/claw44/rev1/rev1.h @@ -0,0 +1,57 @@ +#pragma once + +#include "../claw44.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +#ifdef RGBLIGHT_ENABLE +//rgb led driver +#include "ws2812.h" +#endif + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +//void promicro_bootloader_jmp(bool program); +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, R30, R31, R32, R33 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { KC_NO, KC_NO, L30, L31, L32, L33 }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { KC_NO, KC_NO, R33, R32, R31, R30 } \ + } + +#define LAYOUT_kc( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, R30, R31, R32, R33 \ + ) \ + LAYOUT( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##R30, KC_##R31, KC_##R32, KC_##R33 \ + ) + +enum layer_number { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST, +}; diff --git a/keyboards/claw44/rev1/rules.mk b/keyboards/claw44/rev1/rules.mk new file mode 100644 index 0000000000..ae95ec4014 --- /dev/null +++ b/keyboards/claw44/rev1/rules.mk @@ -0,0 +1,31 @@ +SRC += rev1/matrix.c +SRC += rev1/split_util.c +SRC += rev1/split_scomm.c + +# Build Options +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SWAP_HANDS_ENABLE = no # Enable one-hand typing + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./lib/glcdfont.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c \ + # ./lib/rgb_state_reader.c \ + # ./lib/mode_icon_reader.c \ + # ./lib/host_led_state_reader.c \ + # ./lib/timelogger.c \ diff --git a/keyboards/claw44/rev1/serial_config.h b/keyboards/claw44/rev1/serial_config.h new file mode 100644 index 0000000000..4fab8e8ddf --- /dev/null +++ b/keyboards/claw44/rev1/serial_config.h @@ -0,0 +1,4 @@ +#ifndef SOFT_SERIAL_PIN +#define SOFT_SERIAL_PIN D2 +#define SERIAL_USE_MULTI_TRANSACTION +#endif diff --git a/keyboards/claw44/rev1/split_scomm.c b/keyboards/claw44/rev1/split_scomm.c new file mode 100644 index 0000000000..a1fe6ba5b8 --- /dev/null +++ b/keyboards/claw44/rev1/split_scomm.c @@ -0,0 +1,91 @@ +#ifdef USE_SERIAL +#ifdef SERIAL_USE_MULTI_TRANSACTION +/* --- USE flexible API (using multi-type transaction function) --- */ + +#include +#include +#include +#include +#include "serial.h" +#ifdef CONSOLE_ENABLE + #include +#endif + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; +uint8_t volatile status_com = 0; +uint8_t volatile status1 = 0; +uint8_t slave_buffer_change_count = 0; +uint8_t s_change_old = 0xff; +uint8_t s_change_new = 0xff; + +SSTD_t transactions[] = { +#define GET_SLAVE_STATUS 0 + /* master buffer not changed, only recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + 0, NULL, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define PUT_MASTER_GET_SLAVE_STATUS 1 + /* master buffer changed need send, and recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define GET_SLAVE_BUFFER 2 + /* recive serial_slave_buffer */ + { (uint8_t *)&status1, + 0, NULL, + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + } +}; + +void serial_master_init(void) +{ + soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); +} + +void serial_slave_init(void) +{ + soft_serial_target_init(transactions, TID_LIMIT(transactions)); +} + +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers(int master_update) +{ + int status, smatstatus; + static int need_retry = 0; + + if( s_change_old != s_change_new ) { + smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); + if( smatstatus == TRANSACTION_END ) { + s_change_old = s_change_new; +#ifdef CONSOLE_ENABLE + uprintf("slave matrix = %b %b %b %b\n", + serial_slave_buffer[0], serial_slave_buffer[1], + serial_slave_buffer[2], serial_slave_buffer[3]); +#endif + } + } else { + // serial_slave_buffer dosen't change + smatstatus = TRANSACTION_END; // dummy status + } + + if( !master_update && !need_retry) { + status = soft_serial_transaction(GET_SLAVE_STATUS); + } else { + status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); + } + if( status == TRANSACTION_END ) { + s_change_new = slave_buffer_change_count; + need_retry = 0; + } else { + need_retry = 1; + } + return smatstatus; +} + +#endif // SERIAL_USE_MULTI_TRANSACTION +#endif /* USE_SERIAL */ diff --git a/keyboards/claw44/rev1/split_scomm.h b/keyboards/claw44/rev1/split_scomm.h new file mode 100644 index 0000000000..873d8939d8 --- /dev/null +++ b/keyboards/claw44/rev1/split_scomm.h @@ -0,0 +1,24 @@ +#ifndef SPLIT_COMM_H +#define SPLIT_COMM_H + +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ +#include "serial.h" + +#else +/* --- USE flexible API (using multi-type transaction function) --- */ +// Buffers for master - slave communication +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 + +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; +extern uint8_t slave_buffer_change_count; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(int master_changed); + +#endif + +#endif /* SPLIT_COMM_H */ diff --git a/keyboards/claw44/rev1/split_util.c b/keyboards/claw44/rev1/split_util.c new file mode 100644 index 0000000000..e1ff8b4379 --- /dev/null +++ b/keyboards/claw44/rev1/split_util.c @@ -0,0 +1,70 @@ +#include +#include +#include +#include +#include +#include +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" + +#ifdef USE_MATRIX_I2C +# include "i2c.h" +#else +# include "split_scomm.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { + +#ifdef USE_MATRIX_I2C + i2c_master_init(); +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { + +#ifdef USE_MATRIX_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1< +#include "eeconfig.h" + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); + +void matrix_master_OLED_init (void); + +#endif diff --git a/keyboards/claw44/rules.mk b/keyboards/claw44/rules.mk new file mode 100644 index 0000000000..907a5c8325 --- /dev/null +++ b/keyboards/claw44/rules.mk @@ -0,0 +1,74 @@ +SRC += i2c.c +SRC += serial.c +SRC += ssd1306.c + +# if firmware size over limit, try this option +# CFLAGS += -flto + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes + +DEFAULT_FOLDER = claw44/rev1 diff --git a/keyboards/claw44/serial.c b/keyboards/claw44/serial.c new file mode 100644 index 0000000000..325c29a3f7 --- /dev/null +++ b/keyboards/claw44/serial.c @@ -0,0 +1,590 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + * + * 2018-10-28 checked + * avr-gcc 4.9.2 + * avr-gcc 5.4.0 + * avr-gcc 7.3.0 + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include +#include +#include +#include +#include +#include "serial.h" +//#include + +#ifdef SOFT_SERIAL_PIN + +#ifdef __AVR_ATmega32U4__ + // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. + #ifdef USE_I2C + #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 + #error Using ATmega32U4 I2C, so can not use PD0, PD1 + #endif + #endif + + #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 + #define SERIAL_PIN_DDR DDRD + #define SERIAL_PIN_PORT PORTD + #define SERIAL_PIN_INPUT PIND + #if SOFT_SERIAL_PIN == D0 + #define SERIAL_PIN_MASK _BV(PD0) + #define EIMSK_BIT _BV(INT0) + #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) + #define SERIAL_PIN_INTERRUPT INT0_vect + #elif SOFT_SERIAL_PIN == D1 + #define SERIAL_PIN_MASK _BV(PD1) + #define EIMSK_BIT _BV(INT1) + #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) + #define SERIAL_PIN_INTERRUPT INT1_vect + #elif SOFT_SERIAL_PIN == D2 + #define SERIAL_PIN_MASK _BV(PD2) + #define EIMSK_BIT _BV(INT2) + #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) + #define SERIAL_PIN_INTERRUPT INT2_vect + #elif SOFT_SERIAL_PIN == D3 + #define SERIAL_PIN_MASK _BV(PD3) + #define EIMSK_BIT _BV(INT3) + #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) + #define SERIAL_PIN_INTERRUPT INT3_vect + #endif + #elif SOFT_SERIAL_PIN == E6 + #define SERIAL_PIN_DDR DDRE + #define SERIAL_PIN_PORT PORTE + #define SERIAL_PIN_INPUT PINE + #define SERIAL_PIN_MASK _BV(PE6) + #define EIMSK_BIT _BV(INT6) + #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) + #define SERIAL_PIN_INTERRUPT INT6_vect + #else + #error invalid SOFT_SERIAL_PIN value + #endif + +#else + #error serial.c now support ATmega32U4 only +#endif + +//////////////// for backward compatibility //////////////////////////////// +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; + #endif + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + #endif + uint8_t volatile status0 = 0; + +SSTD_t transactions[] = { + { (uint8_t *)&status0, + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + #else + 0, (uint8_t *)NULL, + #endif + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + #else + 0, (uint8_t *)NULL, + #endif + } +}; + +void serial_master_init(void) +{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } + +void serial_slave_init(void) +{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } + +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers() +{ + int result; + result = soft_serial_transaction(); + return result; +} + +#endif // end of Simple API (OLD API, compatible with let's split serial.c) +//////////////////////////////////////////////////////////////////////////// + +#define ALWAYS_INLINE __attribute__((always_inline)) +#define NO_INLINE __attribute__((noinline)) +#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) + +// parity check +#define ODD_PARITY 1 +#define EVEN_PARITY 0 +#define PARITY EVEN_PARITY + +#ifdef SERIAL_DELAY + // custom setup in config.h + // #define TID_SEND_ADJUST 2 + // #define SERIAL_DELAY 6 // micro sec + // #define READ_WRITE_START_ADJUST 30 // cycles + // #define READ_WRITE_WIDTH_ADJUST 8 // cycles +#else +// ============ Standard setups ============ + +#ifndef SELECT_SOFT_SERIAL_SPEED +#define SELECT_SOFT_SERIAL_SPEED 1 +// 0: about 189kbps +// 1: about 137kbps (default) +// 2: about 75kbps +// 3: about 39kbps +// 4: about 26kbps +// 5: about 20kbps +#endif + +#if __GNUC__ < 6 + #define TID_SEND_ADJUST 14 +#else + #define TID_SEND_ADJUST 2 +#endif + +#if SELECT_SOFT_SERIAL_SPEED == 0 + // Very High speed + #define SERIAL_DELAY 4 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 34 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 1 + // High speed + #define SERIAL_DELAY 6 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 30 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 2 + // Middle speed + #define SERIAL_DELAY 12 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 3 + // Low speed + #define SERIAL_DELAY 24 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 4 + // Very Low speed + #define SERIAL_DELAY 36 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 5 + // Ultra Low speed + #define SERIAL_DELAY 48 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#else +#error invalid SELECT_SOFT_SERIAL_SPEED value +#endif /* SELECT_SOFT_SERIAL_SPEED */ +#endif /* SERIAL_DELAY */ + +#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) +#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) + +#define SLAVE_INT_WIDTH_US 1 +#ifndef SERIAL_USE_MULTI_TRANSACTION + #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY +#else + #define SLAVE_INT_ACK_WIDTH_UNIT 2 + #define SLAVE_INT_ACK_WIDTH 4 +#endif + +static SSTD_t *Transaction_table = NULL; +static uint8_t Transaction_table_size = 0; + +inline static void serial_delay(void) ALWAYS_INLINE; +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static void serial_delay_half1(void) ALWAYS_INLINE; +inline static +void serial_delay_half1(void) { + _delay_us(SERIAL_DELAY_HALF1); +} + +inline static void serial_delay_half2(void) ALWAYS_INLINE; +inline static +void serial_delay_half2(void) { + _delay_us(SERIAL_DELAY_HALF2); +} + +inline static void serial_output(void) ALWAYS_INLINE; +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static void serial_input_with_pullup(void) ALWAYS_INLINE; +inline static +void serial_input_with_pullup(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static void serial_low(void) ALWAYS_INLINE; +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static void serial_high(void) ALWAYS_INLINE; +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_output(); + serial_high(); +} + +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_input_with_pullup(); + + // Enable INT0-INT3,INT6 + EIMSK |= EIMSK_BIT; +#if SERIAL_PIN_MASK == _BV(PE6) + // Trigger on falling edge of INT6 + EICRB &= EICRx_BIT; +#else + // Trigger on falling edge of INT0-INT3 + EICRA &= EICRx_BIT; +#endif +} + +// Used by the sender to synchronize timing with the reciver. +static void sync_recv(void) NO_INLINE; +static +void sync_recv(void) { + for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { + } + // This shouldn't hang if the target disconnects because the + // serial line will float to high if the target does disconnect. + while (!serial_read_pin()); +} + +// Used by the reciver to send a synchronization signal to the sender. +static void sync_send(void) NO_INLINE; +static +void sync_send(void) { + serial_low(); + serial_delay(); + serial_high(); +} + +// Reads a byte from the serial line +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { + uint8_t byte, i, p, pb; + + _delay_sub_us(READ_WRITE_START_ADJUST); + for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { + serial_delay_half1(); // read the middle of pulses + if( serial_read_pin() ) { + byte = (byte << 1) | 1; p ^= 1; + } else { + byte = (byte << 1) | 0; p ^= 0; + } + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + } + /* recive parity bit */ + serial_delay_half1(); // read the middle of pulses + pb = serial_read_pin(); + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + + *pterrcount += (p != pb)? 1 : 0; + + return byte; +} + +// Sends a byte with MSB ordering +void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; +void serial_write_chunk(uint8_t data, uint8_t bit) { + uint8_t b, p; + for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { + if(data & b) { + serial_high(); p ^= 1; + } else { + serial_low(); p ^= 0; + } + serial_delay(); + } + /* send parity bit */ + if(p & 1) { serial_high(); } + else { serial_low(); } + serial_delay(); + + serial_low(); // sync_send() / senc_recv() need raise edge +} + +static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +void serial_send_packet(uint8_t *buffer, uint8_t size) { + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + data = buffer[i]; + sync_send(); + serial_write_chunk(data,8); + } +} + +static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { + uint8_t pecount = 0; + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + sync_recv(); + data = serial_read_chunk(&pecount, 8); + buffer[i] = data; + } + return pecount == 0; +} + +inline static +void change_sender2reciver(void) { + sync_send(); //0 + serial_delay_half1(); //1 + serial_low(); //2 + serial_input_with_pullup(); //2 + serial_delay_half1(); //3 +} + +inline static +void change_reciver2sender(void) { + sync_recv(); //0 + serial_delay(); //1 + serial_low(); //3 + serial_output(); //3 + serial_delay_half1(); //4 +} + +static inline uint8_t nibble_bits_count(uint8_t bits) +{ + bits = (bits & 0x5) + (bits >> 1 & 0x5); + bits = (bits & 0x3) + (bits >> 2 & 0x3); + return bits; +} + +// interrupt handle to be used by the target device +ISR(SERIAL_PIN_INTERRUPT) { + +#ifndef SERIAL_USE_MULTI_TRANSACTION + serial_low(); + serial_output(); + SSTD_t *trans = Transaction_table; +#else + // recive transaction table index + uint8_t tid, bits; + uint8_t pecount = 0; + sync_recv(); + bits = serial_read_chunk(&pecount,7); + tid = bits>>3; + bits = (bits&7) != nibble_bits_count(tid); + if( bits || pecount> 0 || tid > Transaction_table_size ) { + return; + } + serial_delay_half1(); + + serial_high(); // response step1 low->high + serial_output(); + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); + SSTD_t *trans = &Transaction_table[tid]; + serial_low(); // response step2 ack high->low +#endif + + // target send phase + if( trans->target2initiator_buffer_size > 0 ) + serial_send_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size); + // target switch to input + change_sender2reciver(); + + // target recive phase + if( trans->initiator2target_buffer_size > 0 ) { + if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size) ) { + *trans->status = TRANSACTION_ACCEPTED; + } else { + *trans->status = TRANSACTION_DATA_ERROR; + } + } else { + *trans->status = TRANSACTION_ACCEPTED; + } + + sync_recv(); //weit initiator output to high +} + +///////// +// start transaction by initiator +// +// int soft_serial_transaction(int sstd_index) +// +// Returns: +// TRANSACTION_END +// TRANSACTION_NO_RESPONSE +// TRANSACTION_DATA_ERROR +// this code is very time dependent, so we need to disable interrupts +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void) { + SSTD_t *trans = Transaction_table; +#else +int soft_serial_transaction(int sstd_index) { + if( sstd_index > Transaction_table_size ) + return TRANSACTION_TYPE_ERROR; + SSTD_t *trans = &Transaction_table[sstd_index]; +#endif + cli(); + + // signal to the target that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(SLAVE_INT_WIDTH_US); + +#ifndef SERIAL_USE_MULTI_TRANSACTION + // wait for the target response + serial_input_with_pullup(); + _delay_us(SLAVE_INT_RESPONSE_TIME); + + // check if the target is present + if (serial_read_pin()) { + // target failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + +#else + // send transaction table index + int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); + sync_send(); + _delay_sub_us(TID_SEND_ADJUST); + serial_write_chunk(tid, 7); + serial_delay_half1(); + + // wait for the target response (step1 low->high) + serial_input_with_pullup(); + while( !serial_read_pin() ) { + _delay_sub_us(2); + } + + // check if the target is present (step2 high->low) + for( int i = 0; serial_read_pin(); i++ ) { + if (i > SLAVE_INT_ACK_WIDTH + 1) { + // slave failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); + } +#endif + + // initiator recive phase + // if the target is present syncronize with it + if( trans->target2initiator_buffer_size > 0 ) { + if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size) ) { + serial_output(); + serial_high(); + *trans->status = TRANSACTION_DATA_ERROR; + sei(); + return TRANSACTION_DATA_ERROR; + } + } + + // initiator switch to output + change_reciver2sender(); + + // initiator send phase + if( trans->initiator2target_buffer_size > 0 ) { + serial_send_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size); + } + + // always, release the line when not in use + sync_send(); + + *trans->status = TRANSACTION_END; + sei(); + return TRANSACTION_END; +} + +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index) { + SSTD_t *trans = &Transaction_table[sstd_index]; + cli(); + int retval = *trans->status; + *trans->status = 0;; + sei(); + return retval; +} +#endif + +#endif + +// Helix serial.c history +// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) +// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) +// (adjusted with avr-gcc 4.9.2) +// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) +// (adjusted with avr-gcc 4.9.2) +// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) +// (adjusted with avr-gcc 4.9.2) +// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) +// (adjusted with avr-gcc 7.3.0) +// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) +// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/claw44/serial.h b/keyboards/claw44/serial.h new file mode 100644 index 0000000000..7e0c0847a4 --- /dev/null +++ b/keyboards/claw44/serial.h @@ -0,0 +1,84 @@ +#ifndef SOFT_SERIAL_H +#define SOFT_SERIAL_H + +#include + +// ///////////////////////////////////////////////////////////////// +// Need Soft Serial defines in config.h +// ///////////////////////////////////////////////////////////////// +// ex. +// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 +// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 +// // 1: about 137kbps (default) +// // 2: about 75kbps +// // 3: about 39kbps +// // 4: about 26kbps +// // 5: about 20kbps +// +// //// USE Simple API (OLD API, compatible with let's split serial.c) +// ex. +// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +// #define SERIAL_MASTER_BUFFER_LENGTH 1 +// +// //// USE flexible API (using multi-type transaction function) +// #define SERIAL_USE_MULTI_TRANSACTION +// +// ///////////////////////////////////////////////////////////////// + + +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) */ +#if SERIAL_SLAVE_BUFFER_LENGTH > 0 +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +#endif +#if SERIAL_MASTER_BUFFER_LENGTH > 0 +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; +#endif + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); + +#endif // USE Simple API + +// Soft Serial Transaction Descriptor +typedef struct _SSTD_t { + uint8_t *status; + uint8_t initiator2target_buffer_size; + uint8_t *initiator2target_buffer; + uint8_t target2initiator_buffer_size; + uint8_t *target2initiator_buffer; +} SSTD_t; +#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) + +// initiator is transaction start side +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); +// target is interrupt accept side +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); + +// initiator resullt +#define TRANSACTION_END 0 +#define TRANSACTION_NO_RESPONSE 0x1 +#define TRANSACTION_DATA_ERROR 0x2 +#define TRANSACTION_TYPE_ERROR 0x4 +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void); +#else +int soft_serial_transaction(int sstd_index); +#endif + +// target status +// *SSTD_t.status has +// initiator: +// TRANSACTION_END +// or TRANSACTION_NO_RESPONSE +// or TRANSACTION_DATA_ERROR +// target: +// TRANSACTION_DATA_ERROR +// or TRANSACTION_ACCEPTED +#define TRANSACTION_ACCEPTED 0x8 +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index); +#endif + +#endif /* SOFT_SERIAL_H */ diff --git a/keyboards/claw44/ssd1306.c b/keyboards/claw44/ssd1306.c new file mode 100644 index 0000000000..781c722638 --- /dev/null +++ b/keyboards/claw44/ssd1306.c @@ -0,0 +1,346 @@ +#ifdef SSD1306OLED + +#include "ssd1306.h" +#include "i2c.h" +#include +#include "print.h" +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "timer.h" + +static const unsigned char font[] PROGMEM; + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ + +// 'last_flush' is declared as uint16_t, +// so this must be less than 65535 +#define ScreenOffInterval 60000 /* milliseconds */ +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +static bool force_dirty = true; + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(SSD1306_ADDRESS)) { + xprintf("failed to start write to %d\n", SSD1306_ADDRESS); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} +#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(bool rotate) { + bool success = false; + + i2c_master_init(); + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + + if(rotate){ + // the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); + }else{ + // Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); + } + + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) { + char data_ln[strlen(data)+2]; + snprintf(data_ln, sizeof(data_ln), "%s\n", data); + matrix_write(matrix, data_ln); +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } + + // 1 column of space between chars (it's not included in the glyph) + //i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_master_stop(); +#if DEBUG_TO_SCREEN + --displaying; +#endif +} + +void iota_gfx_flush(void) { + matrix_render(&display); +} + +__attribute__ ((weak)) +void iota_gfx_task_user(void) { +} + +void iota_gfx_task(void) { + iota_gfx_task_user(); + + if (display.dirty|| force_dirty) { + iota_gfx_flush(); + force_dirty = false; + } + + /* + if (timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } + */ +} + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { + force_dirty = true; + return true; +} + +#endif diff --git a/keyboards/claw44/ssd1306.h b/keyboards/claw44/ssd1306.h new file mode 100644 index 0000000000..ea8c923280 --- /dev/null +++ b/keyboards/claw44/ssd1306.h @@ -0,0 +1,91 @@ +#pragma once + +#include +#include +#include "pincontrol.h" +#include "action.h" + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + +// Controls the SSD1306 128x32 OLED display via i2c + +#ifndef SSD1306_ADDRESS +#define SSD1306_ADDRESS 0x3C +#endif + +#define DisplayHeight 32 +#define DisplayWidth 128 + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +struct CharacterMatrix display; + +bool iota_gfx_init(bool rotate); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +void iota_gfx_task_user(void); + +void matrix_clear(struct CharacterMatrix *matrix); +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write(struct CharacterMatrix *matrix, const char *data); +void matrix_write_ln(struct CharacterMatrix *matrix, const char *data); +void matrix_write_P(struct CharacterMatrix *matrix, const char *data); +void matrix_render(struct CharacterMatrix *matrix); + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record); \ No newline at end of file diff --git a/keyboards/doro67/multi/config.h b/keyboards/doro67/multi/config.h new file mode 100644 index 0000000000..4a15063cc2 --- /dev/null +++ b/keyboards/doro67/multi/config.h @@ -0,0 +1,33 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xD070 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Backprop Studio +#define PRODUCT Doro67 Multi PCB +#define DESCRIPTION 65% custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, C7, F5, F6, F7 } + +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_LEVELS 7 diff --git a/keyboards/doro67/multi/info.json b/keyboards/doro67/multi/info.json new file mode 100644 index 0000000000..03252140dd --- /dev/null +++ b/keyboards/doro67/multi/info.json @@ -0,0 +1,18 @@ +{ + "keyboard_name": "Doro67 Multi PCB", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_ansi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Ins", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Del", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Up", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"MO(1)", "x":11.25, "y":4, "w":1.25}, {"label":"Left", "x":13, "y":4}, {"label":"Down", "x":14, "y":4}, {"label":"Right", "x":15, "y":4}] + }, + "LAYOUT_iso": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Ins", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Del", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Up", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"MO(1)", "x":11.25, "y":4, "w":1.25}, {"label":"Left", "x":13, "y":4}, {"label":"Down", "x":14, "y":4}, {"label":"Right", "x":15, "y":4}] + }, + "LAYOUT_multi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Back", "x":13, "y":0}, {"label":"F2", "x":14, "y":0}, {"label":"Ins", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Del", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"F1", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Up", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"label":"Alt", "x":10, "y":4}, {"label":"MO(1)", "x":11, "y":4}, {"label":"Ctrl", "x":12, "y":4}, {"label":"Left", "x":13, "y":4}, {"label":"Down", "x":14, "y":4}, {"label":"Right", "x":15, "y":4}] + } + } +} diff --git a/keyboards/doro67/multi/keymaps/default/keymap.c b/keyboards/doro67/multi/keymaps/default/keymap.c new file mode 100644 index 0000000000..dd40a6c3fa --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2019 ShadeDream + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + BL_TOGG, BL_STEP, BL_DEC, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/doro67/multi/keymaps/default/readme.md b/keyboards/doro67/multi/keymaps/default/readme.md new file mode 100644 index 0000000000..6e63cde3a1 --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default/readme.md @@ -0,0 +1,36 @@ +# Default Doro67 ANSI layout. + +This is the default ANSI layout that comes flashed on the Doro67 multi PCB with +the exception of adding backtick as it was not mapped. + +Default Layer: + +``` +,---------------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|BackSp |Ins| +|---------------------------------------------------------------| +|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del| +|---------------------------------------------------------------| +|Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Enter |PUp| +|---------------------------------------------------------------| +|Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| Up|PDn| +|---------------------------------------------------------------| +|Ctrl |GUI |Alt | Space |Alt |FN |Lft|Dwn|Rgt| +`---------------------------------------------------------------' +``` + +FN Layer: + +``` +,---------------------------------------------------------------. +|` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | +|---------------------------------------------------------------| +|BLTog|Stp|Dec|Inc| | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | +`---------------------------------------------------------------' +``` diff --git a/keyboards/doro67/multi/keymaps/default_iso/keymap.c b/keyboards/doro67/multi/keymaps/default_iso/keymap.c new file mode 100644 index 0000000000..2e8d839820 --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default_iso/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2019 ShadeDream + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_iso( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + BL_TOGG, BL_STEP, BL_DEC, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/doro67/multi/keymaps/default_iso/readme.md b/keyboards/doro67/multi/keymaps/default_iso/readme.md new file mode 100644 index 0000000000..d375f0cc5d --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default_iso/readme.md @@ -0,0 +1,36 @@ +# Default Doro67 ISO layout. + +This is the default ISO layout that comes flashed on the Doro67 multi PCB with +the exception of adding backtick and UK ISO specific keycodes as they were not mapped. + +Default Layer: + +``` +,---------------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|BackSp |Ins| +|---------------------------------------------------------------| +|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| |Del| +|------------------------------------------------------|Entr|---| +|Ctrl | A| S| D| F| G| H| J| K| L| ;| '| #| |PUp| +|---------------------------------------------------------------| +|Shft| \| Z| X| C| V| B| N| M| ,| .| /| Shift| Up|PDn| +|---------------------------------------------------------------| +|Ctrl |GUI |Alt | Space |Alt |FN |Lft|Dwn|Rgt| +`---------------------------------------------------------------' +``` + +FN Layer: + +``` +,---------------------------------------------------------------. +|` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | +|---------------------------------------------------------------| +|BLTog|Stp|Dec|Inc| | | | | | | | | | | | +|------------------------------------------------------| |---| +| | | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | +`---------------------------------------------------------------' +``` diff --git a/keyboards/doro67/multi/keymaps/default_multi/keymap.c b/keyboards/doro67/multi/keymaps/default_multi/keymap.c new file mode 100644 index 0000000000..e57dce1ea2 --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default_multi/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2019 ShadeDream + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_multi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_F2, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_F1, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_multi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + BL_TOGG, BL_STEP, BL_DEC, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/doro67/multi/keymaps/default_multi/readme.md b/keyboards/doro67/multi/keymaps/default_multi/readme.md new file mode 100644 index 0000000000..e32f820c28 --- /dev/null +++ b/keyboards/doro67/multi/keymaps/default_multi/readme.md @@ -0,0 +1,39 @@ +# Default Doro67 Multi layout. + +This is the default Multi layout that comes flashed on the Doro67 multi PCB with +the exception of adding backtick as it was not mapped. + +This layout supports both the blocker and non-blocker layouts (2 & 4) with the +difference that the blocker layout lacks the right control key. + +Default Layer: + +``` +,---------------------------------------------------------------. +|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BS| F2|Ins| +|---------------------------------------------------------------| +|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del| +|---------------------------------------------------------------| +|Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Enter |PUp| +|---------------------------------------------------------------| +|Shft| F1| Z| X| C| V| B| N| M| ,| .| /| Shift| Up|PDn| +|---------------------------------------------------------------| +|Ctrl |GUI |Alt | Space |Space| Space |Alt|MO1|Ctl|Lft|Dwn|Rgt| +`---------------------------------------------------------------' +``` + +FN Layer: + +``` +,---------------------------------------------------------------. +|` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | | +|---------------------------------------------------------------| +|BLTog|Stp|Dec|Inc| | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | | | | +|---------------------------------------------------------------| +| | | | | | | | | | | | | +`---------------------------------------------------------------' +``` diff --git a/keyboards/doro67/multi/multi.c b/keyboards/doro67/multi/multi.c new file mode 100644 index 0000000000..477ab245c3 --- /dev/null +++ b/keyboards/doro67/multi/multi.c @@ -0,0 +1,43 @@ +/* Copyright 2019 ShadeDream + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "multi.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/doro67/multi/multi.h b/keyboards/doro67/multi/multi.h new file mode 100644 index 0000000000..0b68aed426 --- /dev/null +++ b/keyboards/doro67/multi/multi.h @@ -0,0 +1,59 @@ +/* Copyright 2019 ShadeDream + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K44, K49, K4A, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, K44, KC_NO, KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C, K4D, K4E }, \ +} + +#define LAYOUT_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K44, K49, K4A, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, K44, KC_NO, KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C, K4D, K4E }, \ +} + +#define LAYOUT_multi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K48, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K43, K44, K45, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, K43, K44, K45, KC_NO, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ +} diff --git a/keyboards/doro67/multi/readme.md b/keyboards/doro67/multi/readme.md new file mode 100644 index 0000000000..ac1484cd74 --- /dev/null +++ b/keyboards/doro67/multi/readme.md @@ -0,0 +1,16 @@ +Doro67 Multi PCB +=== + +A custom 65% keyboard with multiple layout support. + +Do not flash RGB firmware for this board. + +Keyboard Maintainer: [ShadeDream](https://github.com/shadedream) +Hardware Supported: Doro67 Multi PCB +Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=97265.0) + +Make example for this keyboard (after setting up your build environment): + + make doro67/multi:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/doro67/multi/rules.mk b/keyboards/doro67/multi/rules.mk new file mode 100644 index 0000000000..387ce74822 --- /dev/null +++ b/keyboards/doro67/multi/rules.mk @@ -0,0 +1,47 @@ +MCU = atmega32u4 +F_CPU = 16000000 +ARCH = AVR8 +F_USB = $(F_CPU) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/duck/duck_led/duck_led.c b/keyboards/duck/duck_led/duck_led.c new file mode 100644 index 0000000000..2fa920e4b6 --- /dev/null +++ b/keyboards/duck/duck_led/duck_led.c @@ -0,0 +1,7 @@ +#include +#include "duck_led.h" +#include "quantum.h" + +void show(void) { + wait_us((RES / 1000UL) + 1); +} diff --git a/keyboards/duck/duck_led/duck_led.h b/keyboards/duck/duck_led/duck_led.h new file mode 100644 index 0000000000..2546366d0c --- /dev/null +++ b/keyboards/duck/duck_led/duck_led.h @@ -0,0 +1,16 @@ +#pragma once + +#define RES 6000 + +#define NS_PER_SEC (1000000000L) +#define CYCLES_PER_SEC (F_CPU) +#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) +#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) + +enum Device { + Device_PCBRGB, + Device_STATUSLED +}; + +void show(void); + diff --git a/keyboards/duck/eagle_viper/readme.md b/keyboards/duck/eagle_viper/readme.md index 14fb166698..3fec11bc0a 100644 --- a/keyboards/duck/eagle_viper/readme.md +++ b/keyboards/duck/eagle_viper/readme.md @@ -9,4 +9,3 @@ Newest version is the [Eagle/Viper V2](http://duck0113.tistory.com/127) Make example for this keyboard (after setting up your build environment): make duck/eagle_viper/v2:default - diff --git a/keyboards/duck/eagle_viper/v2/config.h b/keyboards/duck/eagle_viper/v2/config.h index f454b2e0e1..a0ce866cc3 100644 --- a/keyboards/duck/eagle_viper/v2/config.h +++ b/keyboards/duck/eagle_viper/v2/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -44,6 +43,9 @@ along with this program. If not, see . #define RGB_DI_PIN D6 #define RGBLED_NUM 17 +/* Set to top left most key */ +#define BOOTMAGIC_LITE_ROW 4 +#define BOOTMAGIC_LITE_COLUMN 10 + #define TAPPING_TERM 200 -#endif diff --git a/keyboards/duck/eagle_viper/v2/indicator_leds.c b/keyboards/duck/eagle_viper/v2/indicator_leds.c index 03a93197da..fc90ed3fbd 100644 --- a/keyboards/duck/eagle_viper/v2/indicator_leds.c +++ b/keyboards/duck/eagle_viper/v2/indicator_leds.c @@ -19,19 +19,13 @@ along with this program. If not, see . #include #include #include "indicator_leds.h" - -#define RES 6000 +#include "duck_led/duck_led.h" #define LED_T1H 600 #define LED_T1L 650 #define LED_T0H 250 #define LED_T0L 1000 -#define NS_PER_SEC (1000000000L) -#define CYCLES_PER_SEC (F_CPU) -#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) -#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) - void send_bit_d4(bool bitVal) { if(bitVal) { asm volatile ( @@ -66,14 +60,12 @@ void send_bit_d4(bool bitVal) { } } -void show(void) { - _delay_us((RES / 1000UL) + 1); -} - -void send_value(uint8_t byte) { +void send_value(uint8_t byte, enum Device device) { for(uint8_t b = 0; b < 8; b++) { - send_bit_d4(byte & 0b10000000); - byte <<= 1; + if(device == Device_STATUSLED) { + send_bit_d4(byte & 0b10000000); + byte <<= 1; + } } } @@ -83,7 +75,8 @@ void indicator_leds_set(bool leds[8]) { cli(); for(led_cnt = 0; led_cnt < 8; led_cnt++) - send_value(leds[led_cnt] ? 255 : 0); + send_value(leds[led_cnt] ? 255 : 0, Device_STATUSLED); sei(); show(); } + diff --git a/keyboards/duck/eagle_viper/v2/indicator_leds.h b/keyboards/duck/eagle_viper/v2/indicator_leds.h index c174fa404d..fe66eef6b2 100644 --- a/keyboards/duck/eagle_viper/v2/indicator_leds.h +++ b/keyboards/duck/eagle_viper/v2/indicator_leds.h @@ -1,2 +1 @@ void indicator_leds_set(bool leds[8]); -void show(void); diff --git a/keyboards/duck/eagle_viper/v2/matrix.c b/keyboards/duck/eagle_viper/v2/matrix.c index 7003a7ae00..a6bc563422 100644 --- a/keyboards/duck/eagle_viper/v2/matrix.c +++ b/keyboards/duck/eagle_viper/v2/matrix.c @@ -89,6 +89,9 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. */ -#ifndef V2_H -#define V2_H +#pragma once #include "quantum.h" @@ -78,4 +77,3 @@ #define LAYOUT_eagle LAYOUT_60_ansi -#endif diff --git a/keyboards/duck/jetfire/config.h b/keyboards/duck/jetfire/config.h index 4bc535b192..774e284918 100644 --- a/keyboards/duck/jetfire/config.h +++ b/keyboards/duck/jetfire/config.h @@ -48,6 +48,10 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCING_DELAY 5 +/* Set to top left most key */ +#define BOOTMAGIC_LITE_ROW 5 +#define BOOTMAGIC_LITE_COLUMN 10 + /* If defined, GRAVE_ESC will always act as ESC when CTRL is held. * This is userful for the Windows task manager shortcut (ctrl+shift+esc). */ diff --git a/keyboards/duck/jetfire/backlight_led.c b/keyboards/duck/jetfire/indicator_leds.c similarity index 76% rename from keyboards/duck/jetfire/backlight_led.c rename to keyboards/duck/jetfire/indicator_leds.c index 7e9dca6e9f..7dbdb1ff79 100644 --- a/keyboards/duck/jetfire/backlight_led.c +++ b/keyboards/duck/jetfire/indicator_leds.c @@ -17,21 +17,13 @@ along with this program. If not, see . #include #include #include -#include "backlight_led.h" +#include "indicator_leds.h" #include "quantum.h" -// #include "led.h" - -#define T1H 900 -#define T1L 600 -#define T0H 400 -#define T0L 900 -#define RES 6000 - -#define NS_PER_SEC (1000000000L) -#define CYCLES_PER_SEC (F_CPU) -#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) -#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) +#define LED_T1H 900 +#define LED_T1L 600 +#define LED_T0H 400 +#define LED_T0L 900 void send_bit_d4(bool bitVal) { @@ -48,8 +40,8 @@ void send_bit_d4(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T1H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T1L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); } else { asm volatile ( "sbi %[port], %[bit] \n\t" @@ -63,8 +55,8 @@ void send_bit_d4(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T0H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T0L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); } } @@ -83,8 +75,8 @@ void send_bit_d6(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (6), - [onCycles] "I" (NS_TO_CYCLES(T1H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T1L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); } else { asm volatile ( "sbi %[port], %[bit] \n\t" @@ -98,20 +90,15 @@ void send_bit_d6(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (6), - [onCycles] "I" (NS_TO_CYCLES(T0H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T0L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); } } -void show(void) -{ - _delay_us((RES / 1000UL) + 1); -} - void send_value(uint8_t byte, enum Device device) { for(uint8_t b = 0; b < 8; b++) { - if(device == Device_STATELED) { + if(device == Device_STATUSLED) { send_bit_d4(byte & 0b10000000); } if(device == Device_PCBRGB) { @@ -123,7 +110,7 @@ void send_value(uint8_t byte, enum Device device) void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device) { - send_value(g, device); send_value(r, device); + send_value(g, device); send_value(b, device); } diff --git a/keyboards/duck/jetfire/backlight_led.h b/keyboards/duck/jetfire/indicator_leds.h similarity index 70% rename from keyboards/duck/jetfire/backlight_led.h rename to keyboards/duck/jetfire/indicator_leds.h index 36d8d9aa9b..695e1db6d4 100644 --- a/keyboards/duck/jetfire/backlight_led.h +++ b/keyboards/duck/jetfire/indicator_leds.h @@ -1,10 +1,6 @@ -#ifndef BACKLIGHT_LED_H -#define BACKLIGHT_LED_H +#pragma once -enum Device { - Device_PCBRGB, - Device_STATELED -}; +#include "duck_led/duck_led.h" void backlight_init_ports(void); void backlight_set_state(bool cfg[7]); @@ -13,6 +9,3 @@ void backlight_toggle_rgb(bool enabled); void backlight_set_rgb(uint8_t cfg[17][3]); void backlight_set(uint8_t level); void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device); -void show(void); - -#endif diff --git a/keyboards/duck/jetfire/jetfire.c b/keyboards/duck/jetfire/jetfire.c index 81bdb95ba1..0662489c6f 100644 --- a/keyboards/duck/jetfire/jetfire.c +++ b/keyboards/duck/jetfire/jetfire.c @@ -14,9 +14,9 @@ * along with this program. If not, see . */ #include "jetfire.h" -#include "backlight_led.h" +#include "indicator_leds.h" -enum backlight_level { +enum BACKLIGHT_AREAS { BACKLIGHT_ALPHA = 0b0000001, BACKLIGHT_MOD = 0b0000010, BACKLIGHT_FROW = 0b0000100, @@ -137,15 +137,15 @@ void backlight_update_state() send_color(backlight_state_led & (1<. */ -#ifndef JETFIRE_H -#define JETFIRE_H +#pragma once #include "quantum.h" @@ -57,4 +56,3 @@ { K0A, K0B, K0C, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, K0I, KC_NO,KC_NO,KC_NO, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, KC_NO } \ } -#endif diff --git a/keyboards/duck/jetfire/readme.md b/keyboards/duck/jetfire/readme.md index 34b351a726..8de2f5ced6 100644 --- a/keyboards/duck/jetfire/readme.md +++ b/keyboards/duck/jetfire/readme.md @@ -9,7 +9,7 @@ Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) Hardware Supported: Duck Jetfire PCB Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=92708.0) -To get into bootloader mode, hold the top top most key above the 2 navigation keys while connecting the USB cable. +**Reset Key:** To put the Jetfire into reset, hold top most key above the 2 navigation keys (`K5P`) while plugging in. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/duck/jetfire/rules.mk b/keyboards/duck/jetfire/rules.mk index 8e05516df3..c708593293 100644 --- a/keyboards/duck/jetfire/rules.mk +++ b/keyboards/duck/jetfire/rules.mk @@ -51,7 +51,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) @@ -70,5 +70,5 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) CUSTOM_MATRIX = yes -SRC += backlight_led.c \ - matrix.c +SRC += indicator_leds.c \ + matrix.c duck_led/duck_led.c diff --git a/keyboards/duck/lightsaver/config.h b/keyboards/duck/lightsaver/config.h index 9e3a08fbd1..d302fb3953 100644 --- a/keyboards/duck/lightsaver/config.h +++ b/keyboards/duck/lightsaver/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -44,6 +43,9 @@ along with this program. If not, see . #define RGB_DI_PIN D6 #define RGBLED_NUM 17 +/* Set to top left most key */ +#define BOOTMAGIC_LITE_ROW 5 +#define BOOTMAGIC_LITE_COLUMN 10 + #define TAPPING_TERM 200 -#endif diff --git a/keyboards/duck/lightsaver/indicator_leds.c b/keyboards/duck/lightsaver/indicator_leds.c index 0a54e151e1..5d2e1ad9f6 100644 --- a/keyboards/duck/lightsaver/indicator_leds.c +++ b/keyboards/duck/lightsaver/indicator_leds.c @@ -18,17 +18,12 @@ along with this program. If not, see . #include #include #include +#include "duck_led/duck_led.h" -#define T1H 900 -#define T1L 600 -#define T0H 400 -#define T0L 900 -#define RES 6000 - -#define NS_PER_SEC (1000000000L) -#define CYCLES_PER_SEC (F_CPU) -#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) -#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) +#define LED_T1H 900 +#define LED_T1L 600 +#define LED_T0H 400 +#define LED_T0L 900 void send_bit_d4(bool bitVal) { if(bitVal) { @@ -44,8 +39,8 @@ void send_bit_d4(bool bitVal) { :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T1H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T1L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); } else { asm volatile ( "sbi %[port], %[bit] \n\t" @@ -59,33 +54,31 @@ void send_bit_d4(bool bitVal) { :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T0H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T0L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); } } -void show(void) { - _delay_us((RES / 1000UL) + 1); -} - -void send_value(uint8_t byte) { +void send_value(uint8_t byte, enum Device device) { for(uint8_t b = 0; b < 8; b++) { - send_bit_d4(byte & 0b10000000); - byte <<= 1; + if(device == Device_STATUSLED) { + send_bit_d4(byte & 0b10000000); + byte <<= 1; + } } } -void send_color(uint8_t r, uint8_t g, uint8_t b) { - send_value(g); - send_value(r); - send_value(b); +void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device) { + send_value(r, device); + send_value(g, device); + send_value(b, device); } void indicator_leds_set(bool leds[8]) { cli(); - send_color(leds[1] ? 255 : 0, leds[2] ? 255 : 0, leds[0] ? 255 : 0); - send_color(leds[4] ? 255 : 0, leds[5] ? 255 : 0, leds[3] ? 255 : 0); - send_color(leds[6] ? 255 : 0, leds[7] ? 255 : 0, 0); + send_color(leds[1] ? 255 : 0, leds[2] ? 255 : 0, leds[0] ? 255 : 0, Device_STATUSLED); + send_color(leds[4] ? 255 : 0, leds[5] ? 255 : 0, leds[3] ? 255 : 0, Device_STATUSLED); + send_color(leds[6] ? 255 : 0, leds[7] ? 255 : 0, 0, Device_STATUSLED); sei(); show(); } diff --git a/keyboards/duck/lightsaver/lightsaver.h b/keyboards/duck/lightsaver/lightsaver.h index 19fcf36bac..1e1185713b 100644 --- a/keyboards/duck/lightsaver/lightsaver.h +++ b/keyboards/duck/lightsaver/lightsaver.h @@ -13,8 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef LIGHTSAVER_H -#define LIGHTSAVER_H +#pragma once #include "quantum.h" @@ -37,4 +36,3 @@ /* 5 */ { K0A, K0B, K0C, NO, NO, NO, NO, NO, K0I, NO, K0K, NO, K0M, K0N, K0O, K0P, K0Q, K0R } \ } -#endif diff --git a/keyboards/duck/lightsaver/matrix.c b/keyboards/duck/lightsaver/matrix.c index a07cdd0d16..543205c0b7 100644 --- a/keyboards/duck/lightsaver/matrix.c +++ b/keyboards/duck/lightsaver/matrix.c @@ -87,6 +87,9 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -44,6 +43,8 @@ along with this program. If not, see . #define RGB_DI_PIN D6 #define RGBLED_NUM 17 -#define TAPPING_TERM 200 +/* Set to top left most key */ +#define BOOTMAGIC_LITE_ROW 5 +#define BOOTMAGIC_LITE_COLUMN 10 -#endif +#define TAPPING_TERM 200 diff --git a/keyboards/duck/octagon/v1/matrix.c b/keyboards/duck/octagon/v1/matrix.c index 8555349943..233404ed30 100644 --- a/keyboards/duck/octagon/v1/matrix.c +++ b/keyboards/duck/octagon/v1/matrix.c @@ -84,6 +84,9 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. */ -#ifndef V1_H -#define V1_H +#pragma once #include "quantum.h" @@ -49,4 +48,3 @@ { K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, KC_NO, K1M, K1N, KC_NO, K1P }, \ { K0A, K0B, K0C, KC_NO, KC_NO, K0G, KC_NO, KC_NO, K0J, K0K, K0L, KC_NO, K0M, K0N, KC_NO, K0P } \ } -#endif diff --git a/keyboards/duck/octagon/v2/config.h b/keyboards/duck/octagon/v2/config.h index 78d18d3bb3..4aab587f66 100644 --- a/keyboards/duck/octagon/v2/config.h +++ b/keyboards/duck/octagon/v2/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -44,6 +43,9 @@ along with this program. If not, see . #define RGB_DI_PIN D6 #define RGBLED_NUM 17 +/* Set to top left most key */ +#define BOOTMAGIC_LITE_ROW 5 +#define BOOTMAGIC_LITE_COLUMN 10 + #define TAPPING_TERM 200 -#endif diff --git a/keyboards/duck/octagon/v2/indicator_leds.c b/keyboards/duck/octagon/v2/indicator_leds.c index c24509f514..116306fb71 100644 --- a/keyboards/duck/octagon/v2/indicator_leds.c +++ b/keyboards/duck/octagon/v2/indicator_leds.c @@ -20,16 +20,10 @@ along with this program. If not, see . #include #include "indicator_leds.h" -#define T1H 900 -#define T1L 600 -#define T0H 400 -#define T0L 900 -#define RES 6000 - -#define NS_PER_SEC (1000000000L) -#define CYCLES_PER_SEC (F_CPU) -#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) -#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) +#define LED_T1H 900 +#define LED_T1L 600 +#define LED_T0H 400 +#define LED_T0L 900 void send_bit_d4(bool bitVal) { if(bitVal) { @@ -45,8 +39,8 @@ void send_bit_d4(bool bitVal) { :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T1H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T1L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); } else { asm volatile ( "sbi %[port], %[bit] \n\t" @@ -60,8 +54,8 @@ void send_bit_d4(bool bitVal) { :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (4), - [onCycles] "I" (NS_TO_CYCLES(T0H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T0L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); } } @@ -80,8 +74,8 @@ void send_bit_d6(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (6), - [onCycles] "I" (NS_TO_CYCLES(T1H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T1L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); } else { asm volatile ( "sbi %[port], %[bit] \n\t" @@ -95,15 +89,11 @@ void send_bit_d6(bool bitVal) :: [port] "I" (_SFR_IO_ADDR(PORTD)), [bit] "I" (6), - [onCycles] "I" (NS_TO_CYCLES(T0H) - 2), - [offCycles] "I" (NS_TO_CYCLES(T0L) - 2)); + [onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), + [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); } } -void show(void) { - _delay_us((RES / 1000UL) + 1); -} - void send_value(uint8_t byte, enum Device device) { for(uint8_t b = 0; b < 8; b++) { if(device == Device_STATUSLED) { @@ -117,8 +107,8 @@ void send_value(uint8_t byte, enum Device device) { } void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device) { - send_value(g, device); send_value(r, device); + send_value(g, device); send_value(b, device); } diff --git a/keyboards/duck/octagon/v2/indicator_leds.h b/keyboards/duck/octagon/v2/indicator_leds.h index 9bb2c8ced9..ad3ec54f52 100644 --- a/keyboards/duck/octagon/v2/indicator_leds.h +++ b/keyboards/duck/octagon/v2/indicator_leds.h @@ -1,11 +1,7 @@ -enum Device { - Device_PCBRGB, - Device_STATUSLED -}; +#include "duck_led/duck_led.h" void indicator_leds_set(bool leds[8]); void backlight_toggle_rgb(bool enabled); void backlight_set_rgb(uint8_t cfg[17][3]); void backlight_init_ports(void); void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device); -void show(void); \ No newline at end of file diff --git a/keyboards/duck/octagon/v2/matrix.c b/keyboards/duck/octagon/v2/matrix.c index a63a37640f..e6e7046b45 100644 --- a/keyboards/duck/octagon/v2/matrix.c +++ b/keyboards/duck/octagon/v2/matrix.c @@ -89,6 +89,9 @@ uint8_t matrix_scan(void) { bool curr_bit = rows & (1<. */ -#ifndef V2_H -#define V2_H +#pragma once #include "quantum.h" @@ -49,4 +48,3 @@ { K1A, KC_NO, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, KC_NO, K1M, K1N, K1O, K1P, KC_NO }, \ { K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0J, KC_NO, K0K, K0L, K0M, K0N, K0O, K0P, KC_NO } \ } -#endif diff --git a/keyboards/dztech/dz40rgb/config.h b/keyboards/dztech/dz40rgb/config.h index 5b9f6dc089..0d6c4ae39a 100644 --- a/keyboards/dztech/dz40rgb/config.h +++ b/keyboards/dztech/dz40rgb/config.h @@ -22,7 +22,6 @@ #define DEBOUNCE 3 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended -#define RGB_MATRIX_SKIP_FRAMES 10 #define RGB_MATRIX_KEYPRESSES #define DISABLE_RGB_MATRIX_SPLASH #define DISABLE_RGB_MATRIX_MULTISPLASH diff --git a/keyboards/dztech/dz60rgb/config.h b/keyboards/dztech/dz60rgb/config.h index 19f32440ea..f43b39810f 100644 --- a/keyboards/dztech/dz60rgb/config.h +++ b/keyboards/dztech/dz60rgb/config.h @@ -23,8 +23,9 @@ #define DEBOUNCE 3 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended -#define RGB_MATRIX_SKIP_FRAMES 10 #define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 4 +#define RGB_MATRIX_LED_FLUSH_LIMIT 26 #define DISABLE_RGB_MATRIX_SPLASH #define DISABLE_RGB_MATRIX_MULTISPLASH #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h index 096368f7ab..a75edd4154 100644 --- a/keyboards/ergodox_ez/config.h +++ b/keyboards/ergodox_ez/config.h @@ -109,7 +109,6 @@ along with this program. If not, see . #define DRIVER_1_LED_TOTAL 24 #define DRIVER_2_LED_TOTAL 24 #define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL -#define RGB_MATRIX_SKIP_FRAMES 10 // #define RGBLIGHT_COLOR_LAYER_0 0x00, 0x00, 0xFF /* #define RGBLIGHT_COLOR_LAYER_1 0x00, 0x00, 0xFF */ diff --git a/keyboards/ergodox_ez/matrix.c b/keyboards/ergodox_ez/matrix.c index 860cf7b229..97f764113b 100644 --- a/keyboards/ergodox_ez/matrix.c +++ b/keyboards/ergodox_ez/matrix.c @@ -33,14 +33,14 @@ along with this program. If not, see . #include "debug.h" #include "util.h" #include "matrix.h" +#include "debounce.h" #include QMK_KEYBOARD_H #ifdef DEBUG_MATRIX_SCAN_RATE -#include "timer.h" +# include "timer.h" #endif /* - * This constant define not debouncing time in msecs, but amount of matrix - * scan loops which should be made to get stable debounced results. + * This constant define not debouncing time in msecs, assuming eager_pr. * * On Ergodox matrix scan rate is relatively low, because of slow I2C. * Now it's only 317 scans/second, or about 3.15 msec/scan. @@ -52,26 +52,17 @@ along with this program. If not, see . */ #ifndef DEBOUNCE -# define DEBOUNCE 5 +# define DEBOUNCE 5 #endif /* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -/* - * matrix state(1:on, 0:off) - * contains the raw values without debounce filtering of the last read cycle. - */ -static matrix_row_t raw_matrix[MATRIX_ROWS]; - -// Debouncing: store for each key the number of scans until it's eligible to -// change. When scanning the matrix, ignore any changes in keys that have -// already changed in the last DEBOUNCE scans. -static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS]; +static matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values +static matrix_row_t matrix[MATRIX_ROWS]; // debounced values static matrix_row_t read_cols(uint8_t row); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); static uint8_t mcp23018_reset_loop; // static uint16_t mcp23018_reset_loop; @@ -81,197 +72,137 @@ uint32_t matrix_timer; uint32_t matrix_scan_count; #endif +__attribute__((weak)) void matrix_init_user(void) {} -__attribute__ ((weak)) -void matrix_init_user(void) {} +__attribute__((weak)) void matrix_scan_user(void) {} -__attribute__ ((weak)) -void matrix_scan_user(void) {} +__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} +__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} +inline uint8_t matrix_rows(void) { return MATRIX_ROWS; } -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} +inline uint8_t matrix_cols(void) { return MATRIX_COLS; } -void matrix_init(void) -{ - // initialize row and col +void matrix_init(void) { + // initialize row and col - mcp23018_status = init_mcp23018(); + mcp23018_status = init_mcp23018(); + unselect_rows(); + init_cols(); - unselect_rows(); - init_cols(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - raw_matrix[i] = 0; - for (uint8_t j=0; j < MATRIX_COLS; ++j) { - debounce_matrix[i * MATRIX_COLS + j] = 0; - } - } + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + raw_matrix[i] = 0; + } #ifdef DEBUG_MATRIX_SCAN_RATE - matrix_timer = timer_read32(); - matrix_scan_count = 0; + matrix_timer = timer_read32(); + matrix_scan_count = 0; #endif - - matrix_init_quantum(); - + debounce_init(MATRIX_ROWS); + matrix_init_quantum(); } void matrix_power_up(void) { - mcp23018_status = init_mcp23018(); + mcp23018_status = init_mcp23018(); - unselect_rows(); - init_cols(); + unselect_rows(); + init_cols(); - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - } + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } #ifdef DEBUG_MATRIX_SCAN_RATE - matrix_timer = timer_read32(); - matrix_scan_count = 0; + matrix_timer = timer_read32(); + matrix_scan_count = 0; #endif } -// Returns a matrix_row_t whose bits are set if the corresponding key should be -// eligible to change in this scan. -matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) { - matrix_row_t result = 0; - matrix_row_t change = rawcols ^ raw_matrix[row]; - raw_matrix[row] = rawcols; - for (uint8_t i = 0; i < MATRIX_COLS; ++i) { - if (debounce_matrix[row * MATRIX_COLS + i]) { - --debounce_matrix[row * MATRIX_COLS + i]; - } else { - result |= (1 << i); - } - if (change & (1 << i)) { - debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE; +uint8_t matrix_scan(void) { + if (mcp23018_status) { // if there was an error + if (++mcp23018_reset_loop == 0) { + // if (++mcp23018_reset_loop >= 1300) { + // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans + // this will be approx bit more frequent than once per second + print("trying to reset mcp23018\n"); + mcp23018_status = init_mcp23018(); + if (mcp23018_status) { + print("left side not responding\n"); + } else { + print("left side attached\n"); + ergodox_blink_all_leds(); + } } } - return result; -} - -matrix_row_t debounce_read_cols(uint8_t row) { - // Read the row without debouncing filtering and store it for later usage. - matrix_row_t cols = read_cols(row); - // Get the Debounce mask. - matrix_row_t mask = debounce_mask(cols, row); - // debounce the row and return the result. - return (cols & mask) | (matrix[row] & ~mask);; -} - -uint8_t matrix_scan(void) -{ - if (mcp23018_status) { // if there was an error - if (++mcp23018_reset_loop == 0) { - // if (++mcp23018_reset_loop >= 1300) { - // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans - // this will be approx bit more frequent than once per second - print("trying to reset mcp23018\n"); - mcp23018_status = init_mcp23018(); - if (mcp23018_status) { - print("left side not responding\n"); - } else { - print("left side attached\n"); - ergodox_blink_all_leds(); - } - } - } #ifdef DEBUG_MATRIX_SCAN_RATE - matrix_scan_count++; + matrix_scan_count++; - uint32_t timer_now = timer_read32(); - if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) { - print("matrix scan frequency: "); - pdec(matrix_scan_count); - print("\n"); + uint32_t timer_now = timer_read32(); + if (TIMER_DIFF_32(timer_now, matrix_timer) > 1000) { + print("matrix scan frequency: "); + pdec(matrix_scan_count); + print("\n"); - matrix_timer = timer_now; - matrix_scan_count = 0; - } + matrix_timer = timer_now; + matrix_scan_count = 0; + } #endif #ifdef LEFT_LEDS - mcp23018_status = ergodox_left_leds_update(); -#endif // LEFT_LEDS - for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { - select_row(i); - // and select on left hand - select_row(i + MATRIX_ROWS_PER_SIDE); - // we don't need a 30us delay anymore, because selecting a - // left-hand row requires more than 30us for i2c. - - // grab cols from left hand - matrix[i] = debounce_read_cols(i); - // grab cols from right hand - matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE); - - unselect_rows(); - } - - matrix_scan_quantum(); + mcp23018_status = ergodox_left_leds_update(); +#endif // LEFT_LEDS + for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { + // select rows from left and right hands + select_row(i); + select_row(i + MATRIX_ROWS_PER_SIDE); + + // we don't need a 30us delay anymore, because selecting a + // left-hand row requires more than 30us for i2c. + + // grab left + right cols. + raw_matrix[i] = read_cols(i); + raw_matrix[i+MATRIX_ROWS_PER_SIDE] = read_cols(i+MATRIX_ROWS_PER_SIDE); + + unselect_rows(); + } + + debounce(raw_matrix, matrix, MATRIX_ROWS, true); + matrix_scan_quantum(); - return 1; + return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. +bool matrix_is_modified(void) // deprecated and evidently not called. { - return true; + return true; } -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<> 2)); + uint8_t data = 0; + mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPIOB, ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT); + if (mcp23018_status < 0) goto out; + data = ~((uint8_t)mcp23018_status); + mcp23018_status = I2C_STATUS_SUCCESS; + out: + i2c_stop(); + return data; } + } else { + /* read from teensy + * bitmask is 0b11110011, but we want those all + * in the lower six bits. + * we'll return 1s for the top two, but that's harmless. + */ + + return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2)); + } } /* Row pin configuration @@ -333,69 +266,70 @@ static matrix_row_t read_cols(uint8_t row) * row: 0 1 2 3 4 5 6 * pin: A0 A1 A2 A3 A4 A5 A6 */ -static void unselect_rows(void) -{ - // no need to unselect on mcp23018, because the select step sets all - // the other row bits high, and it's not changing to a different - // direction - - // unselect on teensy - // Hi-Z(DDR:0, PORT:0) to unselect - DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3); - PORTB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3); - DDRD &= ~(1<<2 | 1<<3); - PORTD &= ~(1<<2 | 1<<3); - DDRC &= ~(1<<6); - PORTC &= ~(1<<6); +static void unselect_rows(void) { + // no need to unselect on mcp23018, because the select step sets all + // the other row bits high, and it's not changing to a different + // direction + + // unselect on teensy + // Hi-Z(DDR:0, PORT:0) to unselect + DDRB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3); + PORTB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3); + DDRD &= ~(1 << 2 | 1 << 3); + PORTD &= ~(1 << 2 | 1 << 3); + DDRC &= ~(1 << 6); + PORTC &= ~(1 << 6); } -static void select_row(uint8_t row) -{ - if (row < 7) { - // select on mcp23018 - if (mcp23018_status) { // if there was an error - // do nothing - } else { - // set active row low : 0 - // set other rows hi-Z : 1 - mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0xFF & ~(1< +Copyright 2013 Oleg Kostyuk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +// Copy and worked on with love from the EZ team + +#pragma once +#include "config_common.h" + +#define VERBOSE + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1337 +#define DEVICE_VER 0x0001 +#define MANUFACTURER g Heavy Industries +#define PRODUCT ErgoTaco +#define DESCRIPTION QMK keyboard firmware for ErgoTaco + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2) +#define MATRIX_COLS 1 + +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 +#define TAPPING_TOGGLE 1 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +#define TAPPING_TERM 200 +#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.) + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() (get_mods() == MOD_MASK_CTRL || get_mods() == MOD_MASK_SHIFT) + +#define DEBOUNCE 5 +#define USB_MAX_POWER_CONSUMPTION 500 diff --git a/keyboards/ergotaco/ergotaco.c b/keyboards/ergotaco/ergotaco.c new file mode 100644 index 0000000000..ecab74b3a2 --- /dev/null +++ b/keyboards/ergotaco/ergotaco.c @@ -0,0 +1,72 @@ +#include QMK_KEYBOARD_H + +bool i2c_initialized = 0; +i2c_status_t mcp23018_status = 0x20; + +void matrix_init_kb(void) { + // (tied to Vcc for hardware convenience) + //DDRB &= ~(1<<4); // set B(4) as input + //PORTB &= ~(1<<4); // set B(4) internal pull-up disabled + + // unused pins + // set as input with internal pull-up enabled + DDRB &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7); + PORTB |= (1<<4 | 1<<5 | 1<<6 | 1<<7); + + DDRC &= ~(1<<7 | 1<<6); + PORTC |= (1<<7 | 1<<6); + + DDRD &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7); + PORTD |= (1<<4 | 1<<5 | 1<<6 | 1<<7); + + DDRE &= ~(1<<6); + PORTE |= (1<<6); + + DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6 | 1<<7); + PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<6 | 1<<7); + + matrix_init_user(); +} + + +uint8_t init_mcp23018(void) { + print("starting init"); + mcp23018_status = 0x20; + + // I2C subsystem + + // uint8_t sreg_prev; + // sreg_prev=SREG; + // cli(); + + if (i2c_initialized == 0) { + i2c_init(); // on pins D(1,0) + i2c_initialized = true; + _delay_ms(1000); + } + + // set pin direction + // - unused : input : 1 + // - input : input : 1 + // - driving : output : 0 + mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; + i2c_stop(); + + // set pull-up + // - unused : on : 1 + // - input : on : 1 + // - driving : off : 0 + mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPPUA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; + +out: + i2c_stop(); + // SREG=sreg_prev; + //uprintf("Init %x\n", mcp23018_status); + return mcp23018_status; +} diff --git a/keyboards/ergotaco/ergotaco.h b/keyboards/ergotaco/ergotaco.h new file mode 100644 index 0000000000..6bc5ce36f8 --- /dev/null +++ b/keyboards/ergotaco/ergotaco.h @@ -0,0 +1,50 @@ +#pragma once +#include +#include +#include +#include "quantum.h" +#include "i2c_master.h" +#include "matrix.h" + + +extern i2c_status_t mcp23018_status; +#define ERGODOX_EZ_I2C_TIMEOUT 1000 +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) +#define CPU_16MHz 0x00 + +// I2C aliases and register addresses (see "mcp23018.md") +//#define I2C_ADDR 0b0100000 +#define I2C_ADDR 0x20 +#define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE ) +#define I2C_ADDR_READ ( (I2C_ADDR<<1) | I2C_READ ) +#define IODIRA 0x00 // i/o direction register +#define IODIRB 0x01 +#define GPPUA 0x0C // GPIO pull-up resistor register +#define GPPUB 0x0D +#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT) +#define GPIOB 0x13 +#define OLATA 0x14 // output latch register +#define OLATB 0x15 + +void init_ergodox(void); +uint8_t init_mcp23018(void); + +/* ---------- LEFT HAND ----------- ---------- RIGHT HAND ---------- */ +#define LAYOUT( \ + L00,L01,L02,L03,L04,L05, R00,R01,R02,R03,R04,R05) \ + \ + /* matrix positions */ \ + { \ + {R00}, \ + {R01}, \ + {R02}, \ + {R03}, \ + {R04}, \ + {R05}, \ + {L05}, \ + {L04}, \ + {L03}, \ + {L02}, \ + {L01}, \ + {L00}, \ +} diff --git a/keyboards/ergotaco/info.json b/keyboards/ergotaco/info.json new file mode 100644 index 0000000000..cf6b810fec --- /dev/null +++ b/keyboards/ergotaco/info.json @@ -0,0 +1,61 @@ +{ + "keyboard_name": "ErgoTaco", + "url": "http://gboards.ca", + "maintainer": "germ", + "width": 13, + "height": 2.75, + "layouts": { + "LAYOUT": { + "layout": [ + { + "x": 0, + "y": 1.25 + }, + { + "x": 1, + "y": 0.75 + }, + { + "x": 2, + "y": 0.5 + }, + { + "x": 3, + "y": 0.25 + }, + { + "x": 4, + "y": 1 + }, + { + "x": 5, + "y": 1.75 + }, + { + "x": 7, + "y": 1.75 + }, + { + "x": 8, + "y": 1 + }, + { + "x": 9, + "y": 0.25 + }, + { + "x": 10, + "y": 0.5 + }, + { + "x": 11, + "y": 0.75 + }, + { + "x": 12, + "y": 1.25 + } + ] + } + } +} diff --git a/keyboards/ergotaco/keymaps/default/keymap.c b/keyboards/ergotaco/keymaps/default/keymap.c new file mode 100644 index 0000000000..be1267ef06 --- /dev/null +++ b/keyboards/ergotaco/keymaps/default/keymap.c @@ -0,0 +1,42 @@ +/* Good on you for modifying your layout! if you don't have + * time to read the QMK docs, a list of keycodes can be found at + * + * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md + * + * There's also a template for adding new layers at the bottom of this file! + */ + +#include QMK_KEYBOARD_H + +#define FIESTA 0 // default layer +#define TACOTIME 1 // symbols + +// Blank template at the bottom +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap template + * + * ,-------------------------------------------------. ,--------------------------------------------. + * | | | | | | | | | | | | | | | + * `-------+------+------+------+------+-------------' `-------+------+------+------+------+--------' */ +[FIESTA] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H +), +}; + +/* Keymap template + * + * ,-------------------------------------------------. ,--------------------------------------------. + * | | | | | | | | | | | | | | | + * `-------+------+------+------+------+-------------' `-------+------+------+------+------+--------' +[FIESTA] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + */ + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; diff --git a/keyboards/ergotaco/keymaps/default/readme.md b/keyboards/ergotaco/keymaps/default/readme.md new file mode 100644 index 0000000000..653f3774ea --- /dev/null +++ b/keyboards/ergotaco/keymaps/default/readme.md @@ -0,0 +1,6 @@ +This is the default keymap for the ErgoTaco, Make it your own! + +## Settings +To edit various settings, enable the 1u trackball and whatnot please modify /keyboards/ergotaco/keymaps/default/rules.mk + +Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR! diff --git a/keyboards/ergotaco/keymaps/default/rules.mk b/keyboards/ergotaco/keymaps/default/rules.mk new file mode 100644 index 0000000000..e394fbf1e6 --- /dev/null +++ b/keyboards/ergotaco/keymaps/default/rules.mk @@ -0,0 +1,10 @@ +#---------------------------------------------------------------------------- +# make ergotaco:default:dfu +# Make sure you have dfu-programmer installed! +#---------------------------------------------------------------------------- +# Firmware options + +#Debug options +VERBOSE = yes +DEBUG_MATRIX_SCAN_RATE = no +DEBUG_MATRIX = yes diff --git a/keyboards/ergotaco/matrix.c b/keyboards/ergotaco/matrix.c new file mode 100644 index 0000000000..e4fd6902f9 --- /dev/null +++ b/keyboards/ergotaco/matrix.c @@ -0,0 +1,366 @@ +/* +Note for ErgoDox EZ customizers: Here be dragons! +This is not a file you want to be messing with. +All of the interesting stuff for you is under keymaps/ :) +Love, Erez + +Copyright 2013 Oleg Kostyuk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "matrix.h" +#include +#include +#include +#include "wait.h" +#include "action_layer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include QMK_KEYBOARD_H +#ifdef DEBUG_MATRIX_SCAN_RATE +#include "timer.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +// ATmega pin defs +#define ROW1 (1<<5) +#define COL6 (1<<0) +#define COL7 (1<<1) +#define COL8 (1<<2) +#define COL9 (1<<3) +#define COL10 (1<<2) +#define COL11 (1<<3) + + +// bit masks +#define BMASK (COL7 | COL8 | COL9 | COL6) +#define DMASK (COL10 | COL11) +#define FMASK (ROW1) + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +/* + * matrix state(1:on, 0:off) + * contains the raw values without debounce filtering of the last read cycle. + */ +static matrix_row_t raw_matrix[MATRIX_ROWS]; + +// Debouncing: store for each key the number of scans until it's eligible to +// change. When scanning the matrix, ignore any changes in keys that have +// already changed in the last DEBOUNCE scans. +static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS]; + +static matrix_row_t read_cols(uint8_t row); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +static uint8_t mcp23018_reset_loop; +// static uint16_t mcp23018_reset_loop; + +#ifdef DEBUG_MATRIX_SCAN_RATE +uint32_t matrix_timer; +uint32_t matrix_scan_count; +#endif + + +__attribute__ ((weak)) +void matrix_init_user(void) {} + +__attribute__ ((weak)) +void matrix_scan_user(void) {} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + + +void matrix_init(void) +{ + // initialize row and col + mcp23018_status = init_mcp23018(); + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + raw_matrix[i] = 0; + for (uint8_t j=0; j < MATRIX_COLS; ++j) { + debounce_matrix[i * MATRIX_COLS + j] = 0; + } + } + +#ifdef DEBUG_MATRIX_SCAN_RATE + matrix_timer = timer_read32(); + matrix_scan_count = 0; +#endif + matrix_init_quantum(); +} + +void matrix_power_up(void) { + mcp23018_status = init_mcp23018(); + + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } + +#ifdef DEBUG_MATRIX_SCAN_RATE + matrix_timer = timer_read32(); + matrix_scan_count = 0; +#endif + +} + +// Returns a matrix_row_t whose bits are set if the corresponding key should be +// eligible to change in this scan. +matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) { + matrix_row_t result = 0; + matrix_row_t change = rawcols ^ raw_matrix[row]; + raw_matrix[row] = rawcols; + for (uint8_t i = 0; i < MATRIX_COLS; ++i) { + if (debounce_matrix[row * MATRIX_COLS + i]) { + --debounce_matrix[row * MATRIX_COLS + i]; + } else { + result |= (1 << i); + } + if (change & (1 << i)) { + debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE; + } + } + return result; +} + +matrix_row_t debounce_read_cols(uint8_t row) { + // Read the row without debouncing filtering and store it for later usage. + matrix_row_t cols = read_cols(row); + // Get the Debounce mask. + matrix_row_t mask = debounce_mask(cols, row); + // debounce the row and return the result. + return (cols & mask) | (matrix[row] & ~mask);; +} + +uint8_t matrix_scan(void) +{ + // Then the keyboard + if (mcp23018_status) { // if there was an error + if (++mcp23018_reset_loop == 0) { + // if (++mcp23018_reset_loop >= 1300) { + // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans + // this will be approx bit more frequent than once per second + print("trying to reset mcp23018\n"); + mcp23018_status = init_mcp23018(); + if (mcp23018_status) { + print("left side not responding\n"); + } else { + print("left side attached\n"); + } + } + } + +#ifdef DEBUG_MATRIX_SCAN_RATE + matrix_scan_count++; + uint32_t timer_now = timer_read32(); + if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) { + print("matrix scan frequency: "); + pdec(matrix_scan_count); + print("\n"); + + matrix_timer = timer_now; + matrix_scan_count = 0; + } +#endif + for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { + select_row(i); + // and select on left hand + select_row(i + MATRIX_ROWS_PER_SIDE); + // we don't need a 30us delay anymore, because selecting a + // left-hand row requires more than 30us for i2c. + + // grab cols from left hand + matrix[i] = debounce_read_cols(i); + // grab cols from right hand + matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE); + + unselect_rows(); + } + + matrix_scan_quantum(); + +#ifdef DEBUG_MATRIX + for (uint8_t c = 0; c < MATRIX_COLS; c++) + for (uint8_t r = 0; r < MATRIX_ROWS; r++) + if (matrix_is_on(r, c)) xprintf("r:%d c:%d \n", r, c); +#endif + + return 1; +} + +bool matrix_is_modified(void) // deprecated and evidently not called. +{ + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<> 2) & 0x01 ; + mcp23018_status = I2C_STATUS_SUCCESS; + out: + i2c_stop(); + +#ifdef DEBUG_MATRIX + if (data != 0x00) xprintf("I2C: %d\n", data); +#endif + return data; + } + } else { + // Read using bitmask + return ~((((PINF & ROW1) >> 5)) & 0x1); + } +} + +// Row pin configuration +static void unselect_rows(void) +{ + // no need to unselect on mcp23018, because the select step sets all + // the other row bits high, and it's not changing to a different + // direction + // Hi-Z(DDR:0, PORT:0) to unselect + DDRB &= ~BMASK; + PORTB &= ~BMASK; + DDRD &= ~DMASK; + PORTD &= ~DMASK; +} + +static void select_row(uint8_t row) +{ + if (row < 6) { + // select on mcp23018 + if (mcp23018_status) { // do nothing on error + // Read using bitmask + } else { // set active row low : 0 // set other rows hi-Z : 1 + mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out; + mcp23018_status = i2c_write(~(1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0690 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MMO_Corp +#define PRODUCT hacked_motospeed +#define DESCRIPTION Motospeed Numpads wired to Teensy++2.0 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// WR XR YR ZR VR ZL YL XL WL VL +#define MATRIX_ROW_PINS { B3, B5, F1, B4, B6, D5, D4, D6, D7, C4} + +// ER DR CR BR AR FR FL AL BL CL DL EL +#define MATRIX_COL_PINS { F7, F6, F5, F4, F3, F2, E0, E1, C0, C1, C2, C3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +//#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/hacked_motospeed.c b/keyboards/handwired/hacked_motospeed/hacked_motospeed.c new file mode 100644 index 0000000000..21643895d7 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/hacked_motospeed.c @@ -0,0 +1,43 @@ +/* Copyright 2019 Vladislav Opara + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "hacked_motospeed.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/hacked_motospeed.h b/keyboards/handwired/hacked_motospeed/hacked_motospeed.h new file mode 100644 index 0000000000..1063fd2e62 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/hacked_motospeed.h @@ -0,0 +1,46 @@ +/* Copyright 2019 Vladislav Opara + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + EWR, DWR, CWR, BWR, AWR, FXR, FYL, AZL, BZL, CZL, DZL, \ + DXR, CXR, BXR, AXR, FZR, DVL, AYL, BYL, CYL, DYL, EZL, \ + EZR, DYR, CYR, BYR, AYR, DVR, FZL, AXL, BXL, CXL, DXL, \ + DZR, CZR, BZR, AZR, FYR, FXL, AWL, BWL, CWL, DWL, EWL \ +) \ +{ \ + { EWR, DWR, CWR, BWR, AWR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, DXR, CXR, BXR, AXR, FXR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, DYR, CYR, BYR, AYR, FYR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { EZR, DZR, CZR, AZR, BZR, FZR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, DVR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FZL, BZL, AZL, CZL, DZL, EZL }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FYL, AYL, BYL, CYL, DYL, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, FXL, AXL, BXL, CXL, DXL, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, AWL, BWL, CWL, DWL, EWL }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, DVL, KC_NO } \ +} diff --git a/keyboards/handwired/hacked_motospeed/info.json b/keyboards/handwired/hacked_motospeed/info.json new file mode 100644 index 0000000000..7ca92785eb --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Hacked Motospeed", + "url": "", + "maintainer": "Deckweiss", + "width": 13, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [{"label":"ESC", "x":0, "y":0, "h":2}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Z", "x":7, "y":0}, {"label":"U", "x":8, "y":0}, {"label":"I", "x":9, "y":0}, {"label":"O", "x":10, "y":0}, {"label":"P", "x":11, "y":0, "w":2}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":7, "y":1}, {"label":"J", "x":8, "y":1}, {"label":"K", "x":9, "y":1}, {"label":"L", "x":10, "y":1}, {"label":"(", "x":11, "y":1}, {"label":")", "x":12, "y":1}, {"label":"=", "x":0, "y":2}, {"label":"Y", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":7, "y":2}, {"label":"M", "x":8, "y":2}, {"label":",", "x":9, "y":2}, {"label":".", "x":10, "y":2}, {"label":"?", "x":11, "y":2}, {"label":"Fn", "x":0, "y":3, "w":2}, {"label":"Num", "x":2, "y":3}, {"label":"Bksp", "x":3, "y":3}, {"label":"Enter", "x":4, "y":3}, {"label":"Spc", "x":5, "y":3}, {"label":"LShift", "x":7, "y":3}, {"label":"LCtrl", "x":8, "y":3}, {"label":"LAlt", "x":9, "y":3}, {"label":"RAlt", "x":10, "y":3}, {"label":"Meta", "x":11, "y":3}, {"label":"Fn", "x":12, "y":2, "h":2}] + } + } +} \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/keymaps/default/config.h b/keyboards/handwired/hacked_motospeed/keymaps/default/config.h new file mode 100644 index 0000000000..72de214ba7 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 Vladislav Opara + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/keymaps/default/keymap.c b/keyboards/handwired/hacked_motospeed/keymaps/default/keymap.c new file mode 100644 index 0000000000..bdec8f2461 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/keymaps/default/keymap.c @@ -0,0 +1,65 @@ +/* Copyright 2019 Vladislav Opara + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_LPRN, KC_RPRN, \ + KC_PEQL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_QUES, \ + XXXXXXX, XXXXXXX, KC_BSPC, KC_ENT, KC_SPC, KC_LSFT, KC_LCTRL, KC_LALT, KC_ALGR, KC_LWIN, XXXXXXX \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/keymaps/default/readme.md b/keyboards/handwired/hacked_motospeed/keymaps/default/readme.md new file mode 100644 index 0000000000..4c740bd9a5 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for hacked_motospeed \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/readme.md b/keyboards/handwired/hacked_motospeed/readme.md new file mode 100644 index 0000000000..ac2d4afc28 --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/readme.md @@ -0,0 +1,23 @@ +# hacked_motospeed + +This is a + - tiny (44key), + - budget (~50€ total expense), + - portable (HID bluetooth & 5aH battery) + - easy to diy (little wiring & soldering needed), + +mechanical keyboard. +It is made by wiring two Motospeed K22 numpads to a Teensy++ 2.0, while reusing as much of the original PCB as possible. +The numpads come with Outemu red linear switches. +(A detailed guide will be posted and linked later) + + +Keyboard Maintainer: [Deckweiss](https://github.com/Deckweiss) +Hardware Supported: Motospeed K22 numpads wired to Teensy++ 2.0 according to my guide (upcoming). +Hardware Availability: Ebay, AliExpress + +Make example for this keyboard (after setting up your build environment): + + make handwired/hacked_motospeed:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk new file mode 100644 index 0000000000..1dc955718f --- /dev/null +++ b/keyboards/handwired/hacked_motospeed/rules.mk @@ -0,0 +1,81 @@ +# MCU name +MCU = at90usb1286 +#MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = halfkay + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=1024 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) \ No newline at end of file diff --git a/keyboards/handwired/jot50/readme.md b/keyboards/handwired/jot50/readme.md index 2dcbc29710..4c22b953d7 100644 --- a/keyboards/handwired/jot50/readme.md +++ b/keyboards/handwired/jot50/readme.md @@ -1,6 +1,4 @@ -# Jotanck - -![Jotanck] +# Jot50 A compact 50% (12x5) ortholinear keyboard kit inspired in the Preonic made by jotix. diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h new file mode 100644 index 0000000000..b50886cdc8 --- /dev/null +++ b/keyboards/handwired/tennie/config.h @@ -0,0 +1,240 @@ +/* +Copyright 2018 Jack Hildebrandt + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x1EEE +#define PRODUCT_ID 0x1313 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Jsck +#define PRODUCT Tennie +#define DESCRIPTION Ten key macropad + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { C6, D4, D0} +#define MATRIX_COL_PINS { D7, E6, B4, B5 } +#define UNUSED_PINS { B1, B2, B3, B6, F4, F5, F6, F7 D1} + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 +#define RGBW +#define RGB_DI_PIN D1 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 1 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/handwired/tennie/info.json b/keyboards/handwired/tennie/info.json new file mode 100644 index 0000000000..c036997929 --- /dev/null +++ b/keyboards/handwired/tennie/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Tennie", + "url": "https://github.com/StoutIEEE/macropad-workshop", + "maintainer": "UW Stout IEEE, Jack Hildebrandt (onemorebyte)", + "width": 4, + "height": 3, + "layouts": { + "LAYOUT": { + "layout": [{"x":0.5, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0.5, "y":2}, {"x":1.5, "y":2}, {"x":2.5, "y":2}] + } + } +} diff --git a/keyboards/handwired/tennie/keymaps/default/config.h b/keyboards/handwired/tennie/keymaps/default/config.h new file mode 100644 index 0000000000..4496c59100 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2018 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/handwired/tennie/keymaps/default/keymap.c b/keyboards/handwired/tennie/keymaps/default/keymap.c new file mode 100644 index 0000000000..3736841cbb --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/default/keymap.c @@ -0,0 +1,95 @@ +/* Copyright 2018 Jack H. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +#define TAPPING_TOGGLE 2 + + +// Layer names +#define base 0 +#define shrek 1 +#define ogre 2 +#define tcp 3 + +// Layer Switches +#define KC_SHRK TT(shrek) +#define KC_OGRE TT(ogre) +#define KC_TCP TT(tcp) + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [base] = LAYOUT( + // ┌────────┬────────┬────────┐ + + KC_DEL, KC_SPC, KC_ENT, + + // ├────────┼────────┼────────┼────────┼ + + KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, + + // ├────────┼────────┼────────┼────────┼ + + KC_SHRK, KC_OGRE, KC_TCP + + // └────────┴────────┴────────┘ + ), + [shrek] = LAYOUT( + // ┌────────┬────────┬────────┐ + + KC_MPRV, KC_MPLY, KC_MNXT, + + // ├────────┼────────┼────────┼────────┼ + + KC_BRID, KC_VOLD, KC_VOLU, KC_BRIU, + + // ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + + // └────────┴────────┴────────┘ + ), + [ogre] = LAYOUT( + // ┌────────┬────────┬────────┐ + + RGB_MOD, RGB_TOG, RGB_RMOD, + + // ├────────┼────────┼────────┼────────┼ + + KC_F13, KC_F14, KC_F15, KC_F16, + + // ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + + // └────────┴────────┴────────┘ + ), + [tcp] = LAYOUT( + // ┌────────┬────────┬────────┐ + + KC_WBAK, KC_WREF, KC_WFWD, + + // ├────────┼────────┼────────┼────────┼ + + XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, + + // ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + + // └────────┴────────┴────────┘ + ), +}; diff --git a/keyboards/handwired/tennie/keymaps/default/readme.md b/keyboards/handwired/tennie/keymaps/default/readme.md new file mode 100644 index 0000000000..1fbaa7f463 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/default/readme.md @@ -0,0 +1,68 @@ +# Default keymap + +This keymap is to serve as an example of how you could make a multi-layer keymap. + +#### keymap + +``` +[base] = LAYOUT_kc( +// ┌────────┬────────┬────────┐ + + DEL , SPC , ENT , + +// ├────────┼────────┼────────┼────────┼ + + LEFT , DOWN , UP , RGHT , + +// ├────────┼────────┼────────┼────────┼ + + SHRK , OGRE , TCP + +// └────────┴────────┴────────┘ +), +[shrek] = LAYOUT_kc( +// ┌────────┬────────┬────────┐ + + MPRV , MPLY , MNXT , + +// ├────────┼────────┼────────┼────────┼ + + BRID , VOLD , VOLU , BRIU , + +// ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + +// └────────┴────────┴────────┘ +), +[ogre] = LAYOUT_kc( +// ┌────────┬────────┬────────┐ + + RGB_MOD, RGB_TOG, RGB_RMOD + +// ├────────┼────────┼────────┼────────┼ + + F13 , F14 , F15 , F16 , + +// ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + +// └────────┴────────┴────────┘ +), +[tcp] = LAYOUT_kc( +// ┌────────┬────────┬────────┐ + + WBAK , WREF , WFWD , + +// ├────────┼────────┼────────┼────────┼ + + XXXXXXX , PGDN , PGUP , XXXXXXX , + +// ├────────┼────────┼────────┼────────┼ + + _______, _______, _______ + +// └────────┴────────┴────────┘ +), +``` diff --git a/keyboards/handwired/tennie/keymaps/simple-numbpad/config.h b/keyboards/handwired/tennie/keymaps/simple-numbpad/config.h new file mode 100644 index 0000000000..a3c309bb29 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/simple-numbpad/config.h @@ -0,0 +1,19 @@ +/* Copyright 2018 Jack Hildebrandt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/handwired/tennie/keymaps/simple-numbpad/keymap.c b/keyboards/handwired/tennie/keymaps/simple-numbpad/keymap.c new file mode 100644 index 0000000000..7cf29b1188 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/simple-numbpad/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2018 Jack Hildebrandt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Layer names +#define base 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [base] = LAYOUT( + // ┌────────┬────────┬────────┐ + + KC_1 , KC_2 , KC_3 , + + // ├────────┼────────┼────────┼────────┼ + + KC_4 , KC_5 , KC_6 , KC_7 , + + // ├────────┼────────┼────────┼────────┼ + + KC_8 , KC_9 , KC_0 + + // └────────┴────────┴────────┘ + ), +}; diff --git a/keyboards/handwired/tennie/keymaps/simple-numbpad/readme.md b/keyboards/handwired/tennie/keymaps/simple-numbpad/readme.md new file mode 100644 index 0000000000..0b3f307501 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/simple-numbpad/readme.md @@ -0,0 +1,18 @@ +# Simple numberpad keymap + +This keymap is to test the soldering work of workshop participants. It can also be used as a simple base for a macropad keymap. +``` +// ┌────────┬────────┬────────┐ + + 1 , 2 , 3 , + +// ├────────┼────────┼────────┼────────┼ + + 4 , 5 , 6 , 7 , + +// ├────────┼────────┼────────┼────────┼ + + 8 , 9 , 0 + +// └────────┴────────┴────────┘ +``` diff --git a/keyboards/handwired/tennie/keymaps/soundboard/config.h b/keyboards/handwired/tennie/keymaps/soundboard/config.h new file mode 100644 index 0000000000..5a1cba7b40 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/soundboard/config.h @@ -0,0 +1,19 @@ +/* Copyright 2018 Jacob Hillebrand + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/handwired/tennie/keymaps/soundboard/keymap.c b/keyboards/handwired/tennie/keymaps/soundboard/keymap.c new file mode 100644 index 0000000000..3bceb1feac --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/soundboard/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2018 Jacob Hillebrand + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Layer names +#define base 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [base] = LAYOUT( + // ┌────────┬────────┬────────┐ + + KC_F13 , KC_F14 , KC_F15 , + + // ├────────┼────────┼────────┼────────┼ + + KC_F16 , KC_F17 , KC_F18 , KC_F19 , + + // ├────────┼────────┼────────┼────────┼ + + KC_F20, KC_F21 , KC_F22 + + // └────────┴────────┴────────┘ + ), +}; diff --git a/keyboards/handwired/tennie/keymaps/soundboard/readme.md b/keyboards/handwired/tennie/keymaps/soundboard/readme.md new file mode 100644 index 0000000000..d05b7117c1 --- /dev/null +++ b/keyboards/handwired/tennie/keymaps/soundboard/readme.md @@ -0,0 +1,19 @@ +# Soundboard keymap + +This keymap binds all keys to function keys 13-22 for something like a +soundboard (ie:[Resanance](https://www.reddit.com/r/discordapp/comments/44ldc1/soundboard_for_discord/)) +``` +// ┌────────┬────────┬────────┐ + + F13 , F14 , F15 , + +// ├────────┼────────┼────────┼────────┼ + + F16 , F17 , F18 , F19 , + +// ├────────┼────────┼────────┼────────┼ + + F20 , F21 , F22 + +// └────────┴────────┴────────┘ +``` diff --git a/keyboards/handwired/tennie/readme.md b/keyboards/handwired/tennie/readme.md new file mode 100644 index 0000000000..bbdbc2b601 --- /dev/null +++ b/keyboards/handwired/tennie/readme.md @@ -0,0 +1,15 @@ +# Tennie + +![tennie](https://raw.githubusercontent.com/StoutIEEE/macropad-workshop/master/images/macropad.jpg) + +A ten key macropad for a club workshop! More information, and build instructions can be found [here](https://github.com/StoutIEEE/macropad-workshop) + +Keyboard Maintainer: [Jack Hildebrandt](https://github.com/onemorebyte), [UW Stout IEEE](https://github.com/StoutIEEE) + +Hardware Supported: ProMicro + +Make example for this keyboard (after setting up your build environment): + + make handwired/tennie:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk new file mode 100644 index 0000000000..0119dc6fb2 --- /dev/null +++ b/keyboards/handwired/tennie/rules.mk @@ -0,0 +1,80 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = caterina + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/handwired/tennie/tennie.c b/keyboards/handwired/tennie/tennie.c new file mode 100644 index 0000000000..e1ceaf153d --- /dev/null +++ b/keyboards/handwired/tennie/tennie.c @@ -0,0 +1,45 @@ +/* Copyright 2018 Jack Hildebrandt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "tennie.h" + +void matrix_init_kb(void) { + matrix_init_user(); +} + +void matrix_post_init(void) { + rgblight_enable_noeeprom(); + keyboard_post_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +//void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + +// led_set_user(usb_led); +//} diff --git a/keyboards/handwired/tennie/tennie.h b/keyboards/handwired/tennie/tennie.h new file mode 100644 index 0000000000..8ab0d04c52 --- /dev/null +++ b/keyboards/handwired/tennie/tennie.h @@ -0,0 +1,37 @@ +/* Copyright 2018 Jack Hildebrandt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K00, K01, K02, \ + K10, K11, K12, K13, \ + K20, K21, K22 \ +) \ +{ \ + { K00, K01, K02, KC_NO }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, KC_NO }, \ +} diff --git a/keyboards/hs60/v1/config.h b/keyboards/hs60/v1/config.h index 7581e54b61..528f08bb99 100644 --- a/keyboards/hs60/v1/config.h +++ b/keyboards/hs60/v1/config.h @@ -120,7 +120,6 @@ along with this program. If not, see . #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended -#define RGB_MATRIX_SKIP_FRAMES 0 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 215 #define DRIVER_ADDR_1 0b1110100 diff --git a/keyboards/hs60/v2/config.h b/keyboards/hs60/v2/config.h index b0c56adf89..05255d1331 100644 --- a/keyboards/hs60/v2/config.h +++ b/keyboards/hs60/v2/config.h @@ -102,9 +102,19 @@ along with this program. If not, see . // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + #define DRIVER_COUNT 2 #define DRIVER_LED_TOTAL 64 @@ -119,6 +129,11 @@ along with this program. If not, see . #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0010000000000001 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + // TODO: refactor with new user EEPROM code (coming soon) #define EEPROM_MAGIC 0x451F #define EEPROM_MAGIC_ADDR 32 diff --git a/keyboards/hs60/v2/keymaps/goatmaster/config.h b/keyboards/hs60/v2/keymaps/goatmaster/config.h new file mode 100644 index 0000000000..f63c903556 --- /dev/null +++ b/keyboards/hs60/v2/keymaps/goatmaster/config.h @@ -0,0 +1,37 @@ +/* +Copyright 2018 Yiancar + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +/* Include overwrites for specific keymap */ + +#define HS60_HHKB +#undef PRODUCT_ID +#define PRODUCT_ID 0x4855 + +#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 +#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 +#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 +#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 +#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111 + +#undef RGB_BACKLIGHT_CAPS_LOCK_INDICATOR +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 255 }, .index = 3-1 } //red diff --git a/keyboards/hs60/v2/keymaps/goatmaster/keymap.c b/keyboards/hs60/v2/keymaps/goatmaster/keymap.c new file mode 100644 index 0000000000..6273dbc646 --- /dev/null +++ b/keyboards/hs60/v2/keymaps/goatmaster/keymap.c @@ -0,0 +1,71 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +//This is the HHKB version of the PCB + +enum macro_keys { + KC_EML = SAFE_RANGE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_60_hhkb( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,\ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),\ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL ), + +[1] = LAYOUT_60_hhkb( /* FN */ + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,\ + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_UP, KC_TRNS, KC_DEL, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \ + KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), + +[2] = LAYOUT_60_hhkb( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), + +[3] = LAYOUT_60_hhkb( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), +}; + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_EML: //use "KC_EML" as keycode in layers above to call macro + if (!record->event.pressed) { + send_string_with_delay_P(PSTR("example@email.com"), 10); //change email value here + } + break; + } + return true; +} diff --git a/keyboards/hs60/v2/keymaps/goatmaster/readme.md b/keyboards/hs60/v2/keymaps/goatmaster/readme.md new file mode 100644 index 0000000000..ea9803cc0b --- /dev/null +++ b/keyboards/hs60/v2/keymaps/goatmaster/readme.md @@ -0,0 +1,6 @@ +The default keymap for HHKB HS60 V2. VIA support enabled. +========================================================= + +![Layout image](https://imgur.com/usbrQWL.png) + +Default layer is normal HHKB with 7U space. Fn layer is used for RGB functions, Volume control and arrow cluster \ No newline at end of file diff --git a/keyboards/hs60/v2/keymaps/goatmaster/rules.mk b/keyboards/hs60/v2/keymaps/goatmaster/rules.mk new file mode 100644 index 0000000000..a2850a8305 --- /dev/null +++ b/keyboards/hs60/v2/keymaps/goatmaster/rules.mk @@ -0,0 +1,66 @@ +# project specific files +SRC = keyboards/zeal60/zeal60.c \ + keyboards/zeal60/rgb_backlight.c \ + drivers/issi/is31fl3733.c \ + quantum/color.c \ + drivers/arm/i2c_master.c + +## chip/board settings +# the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F3xx + +# Linker script to use +# it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +MCU_LDSCRIPT = STM32F303xC + +# Startup code to use +# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f3xx + +# Board: it should exist either in /os/hal/boards/ +# or /boards +BOARD = GENERIC_STM32_F303XC + +# Cortex version +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 + +USE_FPU = yes + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 +OPT_DEFS = + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DNO_SUSPEND_POWER_DOWN + +# Options to pass to dfu-util when flashing +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave + +# Build Options +# comment out to disable the options. +# +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +AUDIO_ENABLE = no # Audio output on port C6 +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in +#SERIAL_LINK_ENABLE = yes + +RAW_ENABLE = yes +DYNAMIC_KEYMAP_ENABLE = yes +CIE1931_CURVE = yes diff --git a/keyboards/hs60/v2/keymaps/stanrc85/rules.mk b/keyboards/hs60/v2/keymaps/stanrc85/rules.mk index a2850a8305..c46a6b9528 100644 --- a/keyboards/hs60/v2/keymaps/stanrc85/rules.mk +++ b/keyboards/hs60/v2/keymaps/stanrc85/rules.mk @@ -1,6 +1,6 @@ # project specific files SRC = keyboards/zeal60/zeal60.c \ - keyboards/zeal60/rgb_backlight.c \ + keyboards/zeal60/rgb_backlight.c \ drivers/issi/is31fl3733.c \ quantum/color.c \ drivers/arm/i2c_master.c diff --git a/keyboards/jj50/keymaps/abstractkb/keymap.c b/keyboards/jj50/keymaps/abstractkb/keymap.c new file mode 100644 index 0000000000..456adeee4b --- /dev/null +++ b/keyboards/jj50/keymaps/abstractkb/keymap.c @@ -0,0 +1,135 @@ +/* +Base Copyright 2017 Luiz Ribeiro +Modified 2017 Andrew Novak +Modified 2018 Wayne Jones (WarmCatUK) +Modified 2019 AbstractKB + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public LicensezZZ +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _DEFLT, + _RAISE, + _LOWER, + _FN +}; + +enum custom_keycodes { + MYRGB_TG = SAFE_RANGE +}; + +bool rgbinit = true; +bool rgbon = true; + +const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {1,5,5}; //only using the first one + +void keyboard_post_init_user(void) { + rgblight_enable_noeeprom(); + led_set_user(host_keyboard_leds()); +} + +uint32_t layer_state_set_user(uint32_t state) { + switch (biton32(state)) { + case _RAISE: + rgblight_sethsv_noeeprom(240,255,255); + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + break; + case _LOWER: + rgblight_sethsv_noeeprom(0,255,255); + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + break; + case _FN: + rgblight_sethsv_noeeprom(0,255,255); + rgblight_mode_noeeprom(RGBLIGHT_MODE_RAINBOW_SWIRL); + break; + default: //_DEFLT + rgblight_sethsv_noeeprom(0,0,255); + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + break; + } + + return state; +} + +void led_set_user(uint8_t usb_led) { + if (usb_led & (1<event.pressed) { + myrgb_toggle(); + } + return false; + default: + return true; + } +} + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_DEFLT] = LAYOUT( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_ENT, \ + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + MO(_FN), KC_LCTL, KC_LGUI, KC_LALT, MO(_LOWER),KC_SPC,KC_SPC,MO(_RAISE),KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), + + + [_RAISE] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, LCTL(LGUI(KC_LEFT)), LGUI(KC_L), LCTL(LGUI(KC_RGHT)), _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_CAPS, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + + [_LOWER] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, KC_GRV, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_BSLS, _______, \ + _______, _______, _______, KC_LBRC, KC_RBRC, S(KC_9),S(KC_0),S(KC_LBRC),S(KC_RBRC),_______,_______,_______, \ + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + + + [_FN] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MYRGB_TG \ + ) +}; diff --git a/keyboards/jj50/keymaps/abstractkb/readme.md b/keyboards/jj50/keymaps/abstractkb/readme.md new file mode 100644 index 0000000000..7ff7e0268a --- /dev/null +++ b/keyboards/jj50/keymaps/abstractkb/readme.md @@ -0,0 +1,6 @@ +# My personal layout for the JJ50 + +It is an approximation of a 60% layout with the alternate layers set up for programming, +with brackets and parenthesis on the homerow +Other things I changed were swapping around delete, backspace, and capslock around +It also uses layer based rgb underglow, and the underglow flashes when capslock is enabled \ No newline at end of file diff --git a/keyboards/kbdfans/kbd66/keymaps/maartenwut/config.h b/keyboards/kbdfans/kbd66/keymaps/maartenwut/config.h old mode 100755 new mode 100644 diff --git a/keyboards/kc60/keymaps/stanleylai/readme.md b/keyboards/kc60/keymaps/stanleylai/readme.md index 815649d987..6f5953ded7 100644 --- a/keyboards/kc60/keymaps/stanleylai/readme.md +++ b/keyboards/kc60/keymaps/stanleylai/readme.md @@ -1,8 +1,6 @@ Stanley Lai's Split Right Shift with Dedicated Arrow Keys ====================== -![Image of KC60 with RGB Underglow](../ws2812/ws2812_example.jpg) - ## Quantum MK Firmware For the full Quantum feature list, see [the parent readme.md](/readme.md). @@ -20,7 +18,7 @@ For the full Quantum feature list, see [the parent readme.md](/readme.md). ![RGB Layer](http://imgur.com/ZWIfuPM) ## WS2812 Support -By default, it is now setup for 16 LEDs on the PF5 breakout pin. See [included image](../ws2812/ws2812_wiring.jpg) for wiring reference. +By default, it is now setup for 16 LEDs on the PF5 breakout pin. ### Build To build this keymap, simply run `make KEYMAP=stanleylai`. diff --git a/keyboards/kc60/readme.md b/keyboards/kc60/readme.md index da84f6159a..e152824ccf 100644 --- a/keyboards/kc60/readme.md +++ b/keyboards/kc60/readme.md @@ -24,7 +24,6 @@ $ make [default|jack|] Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. ## WS2812 Support -![Image of KC60 with RGB Underglow](keymaps/ws2812/ws2812_example.jpg) Build with WS2812 Support by running `make ws2812`. diff --git a/keyboards/keebio/bfo9000/keymaps/abstractkb/config.h b/keyboards/keebio/bfo9000/keymaps/abstractkb/config.h new file mode 100644 index 0000000000..67c64fd8e8 --- /dev/null +++ b/keyboards/keebio/bfo9000/keymaps/abstractkb/config.h @@ -0,0 +1,37 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert +(Modified) Copyright 2019 AbstractKB + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +//my block------------ +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_SLEEP + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS diff --git a/keyboards/keebio/bfo9000/keymaps/abstractkb/keymap.c b/keyboards/keebio/bfo9000/keymaps/abstractkb/keymap.c new file mode 100644 index 0000000000..a8348ecfb5 --- /dev/null +++ b/keyboards/keebio/bfo9000/keymaps/abstractkb/keymap.c @@ -0,0 +1,92 @@ +#include QMK_KEYBOARD_H + +enum layers { + _BASE, + _LIST +}; + +enum my_keycodes { + MYRGB_TG = SAFE_RANGE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_BASE] = LAYOUT( \ + KC_MPLY, KC_PSLS, KC_PAST, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MYRGB_TG, KC_PGUP, \ + KC_MUTE, KC_PPLS, KC_PMNS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_PGDN, \ + KC_P7, KC_P8, KC_P9, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, \ + KC_P4, KC_P5, KC_P6, KC_BSPACE, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_CAPS, KC_PSCR, \ + KC_P1, KC_P2, KC_P3, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, XXXXXXX, KC_INS, \ + KC_P0, KC_PDOT, KC_PENT, TO(_LIST), KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, KC_SPC, KC_SPC, XXXXXXX, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX \ +), + +[_LIST] = LAYOUT( \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, TO(_BASE), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + +}; + +bool rgbinit = true; +bool rgbon = true; + +const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {1,5,5}; //only using the first one + +void matrix_post_init_user(void) { + rgblight_enable_noeeprom(); + led_set_user(host_keyboard_leds()); +} + +uint32_t layer_state_set_user(uint32_t state) { + switch (biton32(state)) { + case _LIST: + rgblight_sethsv_noeeprom(0,255,255); + rgblight_mode_noeeprom(RGBLIGHT_MODE_RAINBOW_SWIRL); + break; + default: //_BASE + rgblight_sethsv_noeeprom(0,0,255); + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + break; + } + + return state; +} + +void led_set_user(uint8_t usb_led) { + if (usb_led & (1<event.pressed) { + myrgb_toggle(); + } + return false; + default: + return true; + } +} + + + diff --git a/keyboards/keebio/bfo9000/keymaps/abstractkb/readme.md b/keyboards/keebio/bfo9000/keymaps/abstractkb/readme.md new file mode 100644 index 0000000000..3ba56571fe --- /dev/null +++ b/keyboards/keebio/bfo9000/keymaps/abstractkb/readme.md @@ -0,0 +1,5 @@ +# My personal layout for the BFO-9000 + +It is an approximation of a 96% layout with a left-hand number pad +Other things I changed were swapping around delete, backspace, and capslock +It also uses layer based rgb underglow, and the underglow flashes when capslock is enabled \ No newline at end of file diff --git a/keyboards/keebio/bfo9000/keymaps/abstractkb/rules.mk b/keyboards/keebio/bfo9000/keymaps/abstractkb/rules.mk new file mode 100644 index 0000000000..7ad666d1a3 --- /dev/null +++ b/keyboards/keebio/bfo9000/keymaps/abstractkb/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE = yes \ No newline at end of file diff --git a/keyboards/keebio/iris/keymaps/davidrambo/config.h b/keyboards/keebio/iris/keymaps/davidrambo/config.h index 2cdff4213b..0c4bf8c8f4 100644 --- a/keyboards/keebio/iris/keymaps/davidrambo/config.h +++ b/keyboards/keebio/iris/keymaps/davidrambo/config.h @@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "config_common.h" +#pragma once /* Use I2C or Serial, not both */ @@ -39,6 +36,5 @@ along with this program. If not, see . #define RGBLIGHT_VAL_STEP 8 */ #define TAPPING_TERM 200 -#include "../../config.h" -#endif + diff --git a/keyboards/keebio/iris/keymaps/davidrambo/keymap.c b/keyboards/keebio/iris/keymaps/davidrambo/keymap.c index 40f0d01454..4d76d745d8 100644 --- a/keyboards/keebio/iris/keymaps/davidrambo/keymap.c +++ b/keyboards/keebio/iris/keymaps/davidrambo/keymap.c @@ -1,6 +1,4 @@ -#include "iris.h" -#include "action_layer.h" -#include "eeconfig.h" +#include QMK_KEYBOARD_H extern keymap_config_t keymap_config; @@ -85,13 +83,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_GAME] = LAYOUT_kc( ___ , ___ , ___ , ___ , ___ , ___ , ___ , ___ , ___ , ___ , ___ , ___ , - ___ , T , Q , W , E , R , ___ , ___ , ___ , ___ , ___ , ___ , + B , T , Q , W , E , R , ___ , ___ , ___ , ___ , ___ , ___ , TAB , LSFT, A , S , D , F , ___ , ___ , ___ , ___ , ___ , ___ , - I , LCTL, Z , X , C , V , M, P , ___, ___ , ___ , ___ , ___ , ___ , + LALT, LCTL, Z , X , C , V , M, P , ___, ___ , ___ , ___ , ___ , ___ , - LALT , LALT , SPC, BSPC, MAC, ___ + G , I , SPC, BSPC, MAC, ___ ), [_SYMBOL] = LAYOUT_kc( diff --git a/keyboards/keebio/iris/keymaps/davidrambo/readme.md b/keyboards/keebio/iris/keymaps/davidrambo/readme.md index 4d21f37c09..181ff97f36 100644 --- a/keyboards/keebio/iris/keymaps/davidrambo/readme.md +++ b/keyboards/keebio/iris/keymaps/davidrambo/readme.md @@ -1,3 +1,5 @@ -# Colemak layout for Iris rev2.1 with Mac and Windows layers and a Gaming Layer. -# Symbol layer is based on my Planck layout, so it provides numbers, symbols, and volume controls. -# Two Navigation layers, for Mac and Windows Colemak layers respectively. \ No newline at end of file +# Iris + +This is a simple Colemak layout for Iris rev2.1 with Mac and Windows layers and a Gaming Layer. +The Symbol layer is based on my Planck layout. It provides numbers, symbols, and volume controls. +There are two Navigation layers, for the Mac and Windows Colemak layers respectively. \ No newline at end of file diff --git a/keyboards/kmac/readme.md b/keyboards/kmac/readme.md index ec36c0a5c9..cd181a5f68 100644 --- a/keyboards/kmac/readme.md +++ b/keyboards/kmac/readme.md @@ -20,7 +20,7 @@ For the full Quantum feature list, see the [documentation](https://docs.qmk.fm). The KMAC are available with two different PCB layouts, a winkey version and a winkeyless version. A default keymap are provided for each versions of the PCB. -Depending on which PCB and keymap you would like to use, you will have to compile the firmware slightly differently. All of the commands should be run in the [keyboards/kmac](/keyboards/kmac) folder. +Depending on which PCB and keymap you would like to use, you will have to compile the firmware slightly differently. All of the commands should be run in the [qmk root](https://github.com/qmk/qmk_firmware/) folder. ### Winkey keymap diff --git a/keyboards/knops/readme.md b/keyboards/knops/readme.md index 563099b6d3..115e4d7c64 100644 --- a/keyboards/knops/readme.md +++ b/keyboards/knops/readme.md @@ -7,4 +7,4 @@ * Maintainer: [Pawnerd](https://github.com/pawnerd) * Hardware Supported: * [`Mini`](mini/): Knops Mini -* Hardware Availability: [knops.io](https://www.knops.io/) \ No newline at end of file +* Hardware Availability: [knops.io](http://www.knops.io/) \ No newline at end of file diff --git a/keyboards/lets_split/keymaps/piemod/README.md b/keyboards/lets_split/keymaps/piemod/README.md index f2a051da14..6bae7e76d9 100644 --- a/keyboards/lets_split/keymaps/piemod/README.md +++ b/keyboards/lets_split/keymaps/piemod/README.md @@ -17,9 +17,6 @@ A keymap for users that need: Still a work-in-progress. Suggestions welcome @ https://github.com/dwrz/piemod. -### Keymap - -![PieMod Keymap](./keymap.png) ### TODO diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h index d2f73a6a8e..f63c38bf6f 100644 --- a/keyboards/massdrop/alt/config.h +++ b/keyboards/massdrop/alt/config.h @@ -119,3 +119,10 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION + +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 15 +#define RGB_MATRIX_LED_FLUSH_LIMIT 10 +#define RGB_MATRIX_EXTRA_TOG + +#include "config_led.h" diff --git a/keyboards/massdrop/alt/config_led.c b/keyboards/massdrop/alt/config_led.c new file mode 100644 index 0000000000..7d98e47c90 --- /dev/null +++ b/keyboards/massdrop/alt/config_led.c @@ -0,0 +1,148 @@ +#ifdef RGB_MATRIX_ENABLE +#include "alt.h" + +#include "led_matrix.h" +#include "rgb_matrix.h" +#include "config_led.h" + +// This table can be almost-automatically derived from ISSI3733_LED_MAP that is +// defined in config_led.h + +// You can calculate the (0-244, 0-64) x/y values from the x/y values defined in +// ISSI3733_LED_MAP with the following formula: +// uint8_t rgb_x = ((ISSI3733_LED_MAP[i].x - MIN_X) / (MAX_X - MIN_X)) * 224; +// uint8_t rgb_y = ((ISSI3733_LED_MAP[i].y - MIN_Y) / (MAX_Y - MIN_Y)) * 64; +// Where the min/max vars are the minimum and maximum "bounds" of x/y values +// present in ISSI3733_LED_MAP +// +// The row/col values need to be manually tweaked though, compensating for the +// "empty" cells that are a product of larger keys +// +// There is a quick-and-dirty implementation of this under ledvis.html + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + /* 0 */ { { (0)|(0 << 4) }, { 8, 56 }, 0 }, // KC_ESC + /* 1 */ { { (0)|(1 << 4) }, { 22, 56 }, 0 }, // KC_1 + /* 2 */ { { (0)|(2 << 4) }, { 35, 56 }, 0 }, // KC_2 + /* 3 */ { { (0)|(3 << 4) }, { 49, 56 }, 0 }, // KC_3 + /* 4 */ { { (0)|(4 << 4) }, { 63, 56 }, 0 }, // KC_4 + /* 5 */ { { (0)|(5 << 4) }, { 77, 56 }, 0 }, // KC_5 + /* 6 */ { { (0)|(6 << 4) }, { 91, 56 }, 0 }, // KC_6 + /* 7 */ { { (0)|(7 << 4) }, { 105, 56 }, 0 }, // KC_7 + /* 8 */ { { (0)|(8 << 4) }, { 118, 56 }, 0 }, // KC_8 + /* 9 */ { { (0)|(9 << 4) }, { 132, 56 }, 0 }, // KC_9 + /* 10 */ { { (0)|(10 << 4) }, { 146, 56 }, 0 }, // KC_0 + /* 11 */ { { (0)|(11 << 4) }, { 160, 56 }, 0 }, // KC_MINS + /* 12 */ { { (0)|(12 << 4) }, { 174, 56 }, 0 }, // KC_EQL + /* 13 */ { { (0)|(13 << 4) }, { 195, 56 }, 0 }, // KC_BSPC + /* 14 */ { { (0)|(14 << 4) }, { 215, 56 }, 0 }, // KC_DEL + /* 15 */ { { (1)|(0 << 4) }, { 11, 44 }, 0 }, // KC_TAB + /* 16 */ { { (1)|(1 << 4) }, { 28, 44 }, 0 }, // KC_Q + /* 17 */ { { (1)|(2 << 4) }, { 42, 44 }, 0 }, // KC_W + /* 18 */ { { (1)|(3 << 4) }, { 56, 44 }, 0 }, // KC_E + /* 19 */ { { (1)|(4 << 4) }, { 70, 44 }, 0 }, // KC_R + /* 20 */ { { (1)|(5 << 4) }, { 84, 44 }, 0 }, // KC_T + /* 21 */ { { (1)|(6 << 4) }, { 98, 44 }, 0 }, // KC_Y + /* 22 */ { { (1)|(7 << 4) }, { 112, 44 }, 0 }, // KC_U + /* 23 */ { { (1)|(8 << 4) }, { 125, 44 }, 0 }, // KC_I + /* 24 */ { { (1)|(9 << 4) }, { 139, 44 }, 0 }, // KC_O + /* 25 */ { { (1)|(10 << 4) }, { 153, 44 }, 0 }, // KC_P + /* 26 */ { { (1)|(11 << 4) }, { 167, 44 }, 0 }, // KC_LBRC + /* 27 */ { { (1)|(12 << 4) }, { 181, 44 }, 0 }, // KC_RBRC + /* 28 */ { { (1)|(13 << 4) }, { 198, 44 }, 0 }, // KC_BSLS + /* 29 */ { { (1)|(14 << 4) }, { 215, 44 }, 0 }, // KC_HOME + /* 30 */ { { (2)|(0 << 4) }, { 13, 32 }, 1 }, // KC_CAPS + /* 31 */ { { (2)|(1 << 4) }, { 32, 32 }, 0 }, // KC_A + /* 32 */ { { (2)|(2 << 4) }, { 46, 32 }, 0 }, // KC_S + /* 33 */ { { (2)|(3 << 4) }, { 60, 32 }, 0 }, // KC_D + /* 34 */ { { (2)|(4 << 4) }, { 73, 32 }, 0 }, // KC_F + /* 35 */ { { (2)|(5 << 4) }, { 87, 32 }, 0 }, // KC_G + /* 36 */ { { (2)|(6 << 4) }, { 101, 32 }, 0 }, // KC_H + /* 37 */ { { (2)|(7 << 4) }, { 115, 32 }, 0 }, // KC_J + /* 38 */ { { (2)|(8 << 4) }, { 129, 32 }, 0 }, // KC_K + /* 39 */ { { (2)|(9 << 4) }, { 143, 32 }, 0 }, // KC_L + /* 40 */ { { (2)|(10 << 4) }, { 156, 32 }, 0 }, // KC_SCLN + /* 41 */ { { (2)|(11 << 4) }, { 170, 32 }, 0 }, // KC_QUOT + /* _________________________________________ */ // ____ + /* 42 */ { { (2)|(13 << 4) }, { 193, 32 }, 0 }, // KC_ENT + /* 43 */ { { (2)|(14 << 4) }, { 215, 32 }, 0 }, // KC_PGUP + /* 44 */ { { (3)|(0 << 4) }, { 16, 19 }, 0 }, // KC_LSFT + /* 45 */ { { (3)|(2 << 4) }, { 39, 19 }, 0 }, // KC_Z + /* 46 */ { { (3)|(3 << 4) }, { 53, 19 }, 0 }, // KC_X + /* 47 */ { { (3)|(4 << 4) }, { 67, 19 }, 0 }, // KC_C + /* 48 */ { { (3)|(5 << 4) }, { 80, 19 }, 0 }, // KC_V + /* 49 */ { { (3)|(6 << 4) }, { 94, 19 }, 0 }, // KC_B + /* 50 */ { { (3)|(7 << 4) }, { 108, 19 }, 0 }, // KC_N + /* 51 */ { { (3)|(8 << 4) }, { 122, 19 }, 0 }, // KC_M + /* 52 */ { { (3)|(9 << 4) }, { 136, 19 }, 0 }, // KC_COMM + /* 53 */ { { (3)|(10 << 4) }, { 150, 19 }, 0 }, // KC_DOT + /* 54 */ { { (3)|(11 << 4) }, { 163, 19 }, 0 }, // KC_SLSH + /* 55 */ { { (3)|(12 << 4) }, { 182, 19 }, 0 }, // KC_RSFT + /* _________________________________________ */ // ____ + /* 56 */ { { (3)|(13 << 4) }, { 201, 19 }, 0 }, // KC_UP + /* 57 */ { { (3)|(14 << 4) }, { 215, 19 }, 0 }, // KC_PGDN + /* 58 */ { { (4)|(0 << 4) }, { 9, 7 }, 0 }, // KC_LCTL + /* 59 */ { { (4)|(1 << 4) }, { 27, 7 }, 0 }, // KC_LGUI + /* 60 */ { { (4)|(2 << 4) }, { 44, 7 }, 0 }, // KC_LALT + /* _________________________________________ */ // ____ + /* _________________________________________ */ // ____ + /* _________________________________________ */ // ____ + /* 61 */ { { (4)|(6 << 4) }, { 96, 7 }, 0 }, // KC_SPC + /* _________________________________________ */ // ____ + /* _________________________________________ */ // ____ + /* _________________________________________ */ // ____ + /* 62 */ { { (4)|(10 << 4) }, { 148, 7 }, 0 }, // KC_RALT + /* 63 */ { { (4)|(11 << 4) }, { 165, 7 }, 0 }, // MO(1) + /* 64 */ { { (4)|(12 << 4) }, { 188, 7 }, 0 }, // KC_LEFT + /* 65 */ { { (4)|(13 << 4) }, { 201, 7 }, 0 }, // KC_DOWN + /* 66 */ { { (4)|(14 << 4) }, { 215, 7 }, 0 }, // KC_RGHT + + // Underglow LEDs + { { 255 }, { 1, 1 }, 0 }, + { { 255 }, { 15, 0 }, 0 }, + { { 255 }, { 31, 0 }, 0 }, + { { 255 }, { 47, 0 }, 0 }, + { { 255 }, { 63, 0 }, 0 }, + { { 255 }, { 79, 0 }, 0 }, + { { 255 }, { 95, 0 }, 0 }, + { { 255 }, { 112, 0 }, 0 }, + { { 255 }, { 128, 0 }, 0 }, + { { 255 }, { 144, 0 }, 0 }, + { { 255 }, { 160, 0 }, 0 }, + { { 255 }, { 176, 0 }, 0 }, + { { 255 }, { 192, 0 }, 0 }, + { { 255 }, { 208, 0 }, 0 }, + { { 255 }, { 222, 1 }, 0 }, + { { 255 }, { 224, 13 }, 0 }, + { { 255 }, { 224, 25 }, 0 }, + { { 255 }, { 224, 38 }, 0 }, + { { 255 }, { 224, 50 }, 0 }, + { { 255 }, { 222, 62 }, 0 }, + { { 255 }, { 191, 64 }, 0 }, + { { 255 }, { 179, 64 }, 0 }, + { { 255 }, { 167, 64 }, 0 }, + { { 255 }, { 153, 64 }, 0 }, + { { 255 }, { 139, 64 }, 0 }, + { { 255 }, { 125, 64 }, 0 }, + { { 255 }, { 112, 64 }, 0 }, + { { 255 }, { 98, 64 }, 0 }, + { { 255 }, { 84, 64 }, 0 }, + { { 255 }, { 70, 64 }, 0 }, + { { 255 }, { 56, 64 }, 0 }, + { { 255 }, { 42, 64 }, 0 }, + { { 255 }, { 28, 64 }, 0 }, + { { 255 }, { 1, 62 }, 0 }, + { { 255 }, { 0, 50 }, 0 }, + { { 255 }, { 0, 38 }, 0 }, + { { 255 }, { 0, 25 }, 0 }, + { { 255 }, { 0, 13 }, 0 }, +}; + +#ifdef USB_LED_INDICATOR_ENABLE +void rgb_matrix_indicators_kb(void) +{ + led_matrix_indicators(); +} +#endif // USB_LED_INDICATOR_ENABLE + +#endif diff --git a/keyboards/massdrop/alt/config_led.h b/keyboards/massdrop/alt/config_led.h index a049e38179..82117b3327 100644 --- a/keyboards/massdrop/alt/config_led.h +++ b/keyboards/massdrop/alt/config_led.h @@ -15,11 +15,11 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef _config_led_h_ -#define _config_led_h_ +#pragma once //Define number of ISSI3733 drivers being used (1...16) #define ISSI3733_DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL ISSI3733_LED_COUNT //Hardware address of each driver (Refer to ISSI3733 pdf "Table 1 Slave Address" and keyboard schematic) #define ISSI3773_DRIVER_ADDRESSES { 0xA0, 0xBE } @@ -30,21 +30,24 @@ along with this program. If not, see . //Count of LED bodies #define ISSI3733_LED_COUNT 105 -//Default Global Current Register value (Default brightness 0 - 255) -#define ISSI3733_GCR_DEFAULT 128 - #define LED_GCR_MAX 165 //Max GCR value (0 - 255) WARNING: Raising this value may overload the LED drivers and USB bus #define LED_GCR_STEP 10 //GCR increment/decrement value -//Automatic power rollback and recovery -#define V5_HIGH 2540 //5V high level (After low power detect, point at which LEDs are allowed to use more power ) -#define V5_LOW 2480 //5V low level (LED power rolled back to stay above this limit) -#define V5_CAT 2200 //5V catastrophic level (Host USB port potential to shut down) - +#ifdef USE_MASSDROP_CONFIGURATOR #define ANIMATION_SPEED_STEP 1 +#define BREATHE_STEP 1 #define BREATHE_MIN_STEP 0 #define BREATHE_MAX_STEP 255 +#endif + +//Default Global Current Register value (Default brightness 0 - 255) +#define ISSI3733_GCR_DEFAULT LED_GCR_MAX + +//Automatic power rollback and recovery +#define V5_HIGH 2540 //5V high level (After low power detect, point at which LEDs are allowed to use more power ) +#define V5_LOW 2480 //5V low level (LED power rolled back to stay above this limit) +#define V5_CAT 2200 //5V catastrophic level (Host USB port potential to shut down) //LED Mapping - More practically generated from a spreadsheet program //id: ID of the LED (Sync with PCB callouts) @@ -174,5 +177,3 @@ along with this program. If not, see . #define USB_LED_COMPOSE_SCANCODE 255 #define USB_LED_KANA_SCANCODE 255 #endif //USB_LED_INDICATOR_ENABLE - -#endif //_config_led_h_ diff --git a/keyboards/massdrop/alt/keymaps/abishalom/keymap.c b/keyboards/massdrop/alt/keymaps/abishalom/keymap.c index 10bc62c1f0..a4519d4049 100644 --- a/keyboards/massdrop/alt/keymaps/abishalom/keymap.c +++ b/keyboards/massdrop/alt/keymaps/abishalom/keymap.c @@ -1,25 +1,13 @@ #include QMK_KEYBOARD_H enum alt_keycodes { - L_BRI = SAFE_RANGE, //LED Brightness Increase - L_BRD, //LED Brightness Decrease - L_PTN, //LED Pattern Select Next - L_PTP, //LED Pattern Select Previous - L_PSI, //LED Pattern Speed Increase - L_PSD, //LED Pattern Speed Decrease - L_T_MD, //LED Toggle Mode - L_T_ONF, //LED Toggle On / Off - L_ON, //LED On - L_OFF, //LED Off - L_T_BR, //LED Toggle Breath Effect - L_T_PTD, //LED Toggle Scrolling Pattern Direction - U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active - U_T_AGCR, //USB Toggle Automatic GCR control - DBG_TOG, //DEBUG Toggle On / Off - DBG_MTRX, //DEBUG Toggle Matrix Prints - DBG_KBD, //DEBUG Toggle Keyboard Prints - DBG_MOU, //DEBUG Toggle Mouse Prints - MD_BOOT, //Restart into bootloader after hold timeout + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout }; #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode @@ -35,19 +23,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ ), [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MUTE, \ - L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_END, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ - KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, DBG_TOG, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ ), /* [X] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), */ }; @@ -68,82 +56,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; switch (keycode) { - case L_BRI: - if (record->event.pressed) { - if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; - else gcr_desired += LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_BRD: - if (record->event.pressed) { - if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; - else gcr_desired -= LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_PTN: - if (record->event.pressed) { - if (led_animation_id == led_setups_count - 1) led_animation_id = 0; - else led_animation_id++; - } - return false; - case L_PTP: - if (record->event.pressed) { - if (led_animation_id == 0) led_animation_id = led_setups_count - 1; - else led_animation_id--; - } - return false; - case L_PSI: - if (record->event.pressed) { - led_animation_speed += ANIMATION_SPEED_STEP; - } - return false; - case L_PSD: - if (record->event.pressed) { - led_animation_speed -= ANIMATION_SPEED_STEP; - if (led_animation_speed < 0) led_animation_speed = 0; - } - return false; - case L_T_MD: - if (record->event.pressed) { - led_lighting_mode++; - if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; - } - return false; - case L_T_ONF: - if (record->event.pressed) { - led_enabled = !led_enabled; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_ON: - if (record->event.pressed) { - led_enabled = 1; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_OFF: - if (record->event.pressed) { - led_enabled = 0; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_T_BR: - if (record->event.pressed) { - led_animation_breathing = !led_animation_breathing; - if (led_animation_breathing) { - gcr_breathe = gcr_desired; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_dir = 1; - } - } - return false; - case L_T_PTD: - if (record->event.pressed) { - led_animation_direction = !led_animation_direction; - } - return false; case U_T_AUTO: if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); diff --git a/keyboards/massdrop/alt/keymaps/default/keymap.c b/keyboards/massdrop/alt/keymaps/default/keymap.c index 10bc62c1f0..a4519d4049 100644 --- a/keyboards/massdrop/alt/keymaps/default/keymap.c +++ b/keyboards/massdrop/alt/keymaps/default/keymap.c @@ -1,25 +1,13 @@ #include QMK_KEYBOARD_H enum alt_keycodes { - L_BRI = SAFE_RANGE, //LED Brightness Increase - L_BRD, //LED Brightness Decrease - L_PTN, //LED Pattern Select Next - L_PTP, //LED Pattern Select Previous - L_PSI, //LED Pattern Speed Increase - L_PSD, //LED Pattern Speed Decrease - L_T_MD, //LED Toggle Mode - L_T_ONF, //LED Toggle On / Off - L_ON, //LED On - L_OFF, //LED Off - L_T_BR, //LED Toggle Breath Effect - L_T_PTD, //LED Toggle Scrolling Pattern Direction - U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active - U_T_AGCR, //USB Toggle Automatic GCR control - DBG_TOG, //DEBUG Toggle On / Off - DBG_MTRX, //DEBUG Toggle Matrix Prints - DBG_KBD, //DEBUG Toggle Keyboard Prints - DBG_MOU, //DEBUG Toggle Mouse Prints - MD_BOOT, //Restart into bootloader after hold timeout + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout }; #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode @@ -35,19 +23,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ ), [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MUTE, \ - L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_END, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ - KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, DBG_TOG, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ ), /* [X] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), */ }; @@ -68,82 +56,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; switch (keycode) { - case L_BRI: - if (record->event.pressed) { - if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; - else gcr_desired += LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_BRD: - if (record->event.pressed) { - if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; - else gcr_desired -= LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_PTN: - if (record->event.pressed) { - if (led_animation_id == led_setups_count - 1) led_animation_id = 0; - else led_animation_id++; - } - return false; - case L_PTP: - if (record->event.pressed) { - if (led_animation_id == 0) led_animation_id = led_setups_count - 1; - else led_animation_id--; - } - return false; - case L_PSI: - if (record->event.pressed) { - led_animation_speed += ANIMATION_SPEED_STEP; - } - return false; - case L_PSD: - if (record->event.pressed) { - led_animation_speed -= ANIMATION_SPEED_STEP; - if (led_animation_speed < 0) led_animation_speed = 0; - } - return false; - case L_T_MD: - if (record->event.pressed) { - led_lighting_mode++; - if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; - } - return false; - case L_T_ONF: - if (record->event.pressed) { - led_enabled = !led_enabled; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_ON: - if (record->event.pressed) { - led_enabled = 1; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_OFF: - if (record->event.pressed) { - led_enabled = 0; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_T_BR: - if (record->event.pressed) { - led_animation_breathing = !led_animation_breathing; - if (led_animation_breathing) { - gcr_breathe = gcr_desired; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_dir = 1; - } - } - return false; - case L_T_PTD: - if (record->event.pressed) { - led_animation_direction = !led_animation_direction; - } - return false; case U_T_AUTO: if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); diff --git a/keyboards/massdrop/alt/keymaps/default_md/keymap.c b/keyboards/massdrop/alt/keymaps/default_md/keymap.c new file mode 100644 index 0000000000..7969583df4 --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/default_md/keymap.c @@ -0,0 +1,223 @@ +#include QMK_KEYBOARD_H + +enum alt_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase //Working + L_BRD, //LED Brightness Decrease //Working + L_PTN, //LED Pattern Select Next //Working + L_PTP, //LED Pattern Select Previous //Working + L_PSI, //LED Pattern Speed Increase //Working + L_PSD, //LED Pattern Speed Decrease //Working + L_T_MD, //LED Toggle Mode //Working + L_T_ONF, //LED Toggle On / Off //Broken + L_ON, //LED On //Broken + L_OFF, //LED Off //Broken + L_T_BR, //LED Toggle Breath Effect //Working + L_T_PTD, //LED Toggle Scrolling Pattern Direction //Working + U_T_AGCR, //USB Toggle Automatic GCR control //Working + DBG_TOG, //DEBUG Toggle On / Off // + DBG_MTRX, //DEBUG Toggle Matrix Prints // + DBG_KBD, //DEBUG Toggle Keyboard Prints // + DBG_MOU, //DEBUG Toggle Mouse Prints // + MD_BOOT //Restart into bootloader after hold timeout //Working +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} + +led_instruction_t led_instructions[] = { + //LEDs are normally inactive, no processing is performed on them + //Flags are used in matching criteria for an LED to be active and indicate how to color it + //Flags can be found in tmk_core/protocol/arm_atsam/led_matrix.h (prefixed with LED_FLAG_) + //LED IDs can be found in config_led.h in the keyboard's directory + //Examples are below + + //All LEDs use the user's selected pattern (this is the factory default) + { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + + //Specific LEDs use the user's selected pattern while all others are off + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_ROTATE_PATTERN, .id0 = 0xFFFFFFFF, .id1 = 0xAAAAAAAA, .id2 = 0x55555555, .id3 = 0x11111111 }, + + //Specific LEDs use specified RGB values while all others are off + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFF, .id1 = 0x00FF, .id2 = 0x0000FF00, .id3 = 0xFF000000, .r = 75, .g = 150, .b = 225 }, + + //All LEDs use the user's selected pattern + //On layer 1, all key LEDs (except the top row which keeps active pattern) are red while all edge LEDs are green + //When layer 1 is active, key LEDs use red (id0 32 - 16: 1111 1111 1111 1111 1000 0000 0000 0000 = 0xFFFF8000) (except top row 15 - 1) + //When layer 1 is active, key LEDs use red (id1 64 - 33: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //When layer 1 is active, key LEDs use red (id2 67 - 65: 0000 0000 0000 0000 0000 0000 0000 0111 = 0x00000007) + //When layer 1 is active, edge LEDs use green (id2 95 - 68: 1111 1111 1111 1111 1111 1111 1111 1000 = 0xFFFFFFF8) + //When layer 1 is active, edge LEDs use green (id3 105 - 96: 0000 0000 0000 0000 0000 0011 1111 1111 = 0x000003FF) + // { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_MATCH_LAYER | LED_FLAG_USE_RGB, .id0 = 0xFFFF8000, .id1 = 0xFFFFFFFF, .id2 = 0x00000007, .r = 255, .layer = 1 }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_MATCH_LAYER | LED_FLAG_USE_RGB, .id2 = 0xFFFFFFF8, .id3 = 0x000003FF, .g = 127, .layer = 1 }, + + //All key LEDs use red while edge LEDs use the active pattern + //All key LEDs use red (id0 32 - 1: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //All key LEDs use red (id1 64 - 33: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //All key LEDs use red (id2 67 - 65: 0000 0000 0000 0000 0000 0000 0000 0111 = 0x00000007) + //Edge uses active pattern (id2 95 - 68: 1111 1111 1111 1111 1111 1111 1111 1000 = 0xFFFFFFF8) + //Edge uses active pattern (id3 105 - 96: 0000 0000 0000 0000 0000 0011 1111 1111 = 0x000003FF) + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFFFFFFFF, .id1 = 0xFFFFFFFF, .id2 = 0x00000007, .r = 255 }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_ROTATE_PATTERN , .id2 = 0xFFFFFFF8, .id3 = 0x000003FF }, + + //end must be set to 1 to indicate end of instruction set + { .end = 1 } +}; diff --git a/keyboards/massdrop/alt/keymaps/default_md/rules.mk b/keyboards/massdrop/alt/keymaps/default_md/rules.mk new file mode 100644 index 0000000000..064a6f54c1 --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/default_md/rules.mk @@ -0,0 +1,2 @@ +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/alt/keymaps/mac/keymap.c b/keyboards/massdrop/alt/keymaps/mac/keymap.c index 639eb2da75..26a1c6d014 100644 --- a/keyboards/massdrop/alt/keymaps/mac/keymap.c +++ b/keyboards/massdrop/alt/keymaps/mac/keymap.c @@ -1,25 +1,13 @@ #include QMK_KEYBOARD_H enum alt_keycodes { - L_BRI = SAFE_RANGE, //LED Brightness Increase - L_BRD, //LED Brightness Decrease - L_PTN, //LED Pattern Select Next - L_PTP, //LED Pattern Select Previous - L_PSI, //LED Pattern Speed Increase - L_PSD, //LED Pattern Speed Decrease - L_T_MD, //LED Toggle Mode - L_T_ONF, //LED Toggle On / Off - L_ON, //LED On - L_OFF, //LED Off - L_T_BR, //LED Toggle Breath Effect - L_T_PTD, //LED Toggle Scrolling Pattern Direction - U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active - U_T_AGCR, //USB Toggle Automatic GCR control - DBG_TOG, //DEBUG Toggle On / Off - DBG_MTRX, //DEBUG Toggle Matrix Prints - DBG_KBD, //DEBUG Toggle Keyboard Prints - DBG_MOU, //DEBUG Toggle Mouse Prints - MD_BOOT, //Restart into bootloader after hold timeout + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout }; #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode @@ -35,19 +23,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ ), [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_MUTE, \ - L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_END, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \ - KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, DBG_TOG, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ ), /* [X] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), */ }; @@ -68,82 +56,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; switch (keycode) { - case L_BRI: - if (record->event.pressed) { - if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; - else gcr_desired += LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_BRD: - if (record->event.pressed) { - if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; - else gcr_desired -= LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_PTN: - if (record->event.pressed) { - if (led_animation_id == led_setups_count - 1) led_animation_id = 0; - else led_animation_id++; - } - return false; - case L_PTP: - if (record->event.pressed) { - if (led_animation_id == 0) led_animation_id = led_setups_count - 1; - else led_animation_id--; - } - return false; - case L_PSI: - if (record->event.pressed) { - led_animation_speed += ANIMATION_SPEED_STEP; - } - return false; - case L_PSD: - if (record->event.pressed) { - led_animation_speed -= ANIMATION_SPEED_STEP; - if (led_animation_speed < 0) led_animation_speed = 0; - } - return false; - case L_T_MD: - if (record->event.pressed) { - led_lighting_mode++; - if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; - } - return false; - case L_T_ONF: - if (record->event.pressed) { - led_enabled = !led_enabled; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_ON: - if (record->event.pressed) { - led_enabled = 1; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_OFF: - if (record->event.pressed) { - led_enabled = 0; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_T_BR: - if (record->event.pressed) { - led_animation_breathing = !led_animation_breathing; - if (led_animation_breathing) { - gcr_breathe = gcr_desired; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_dir = 1; - } - } - return false; - case L_T_PTD: - if (record->event.pressed) { - led_animation_direction = !led_animation_direction; - } - return false; case U_T_AUTO: if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); diff --git a/keyboards/massdrop/alt/keymaps/mac_md/keymap.c b/keyboards/massdrop/alt/keymaps/mac_md/keymap.c new file mode 100644 index 0000000000..8a052cc250 --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/mac_md/keymap.c @@ -0,0 +1,193 @@ +#include QMK_KEYBOARD_H + +enum alt_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase //Working + L_BRD, //LED Brightness Decrease //Working + L_PTN, //LED Pattern Select Next //Working + L_PTP, //LED Pattern Select Previous //Working + L_PSI, //LED Pattern Speed Increase //Working + L_PSD, //LED Pattern Speed Decrease //Working + L_T_MD, //LED Toggle Mode //Working + L_T_ONF, //LED Toggle On / Off //Broken + L_ON, //LED On //Broken + L_OFF, //LED Off //Broken + L_T_BR, //LED Toggle Breath Effect //Working + L_T_PTD, //LED Toggle Scrolling Pattern Direction //Working + U_T_AGCR, //USB Toggle Automatic GCR control //Working + DBG_TOG, //DEBUG Toggle On / Off // + DBG_MTRX, //DEBUG Toggle Matrix Prints // + DBG_KBD, //DEBUG Toggle Keyboard Prints // + DBG_MOU, //DEBUG Toggle Mouse Prints // + MD_BOOT //Restart into bootloader after hold timeout //Working +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ + L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} + +led_instruction_t led_instructions[] = { + //Please see ../default_md/keymap.c for examples + + //All LEDs use the user's selected pattern (this is the factory default) + { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + + //end must be set to 1 to indicate end of instruction set + { .end = 1 } +}; diff --git a/keyboards/massdrop/alt/keymaps/mac_md/rules.mk b/keyboards/massdrop/alt/keymaps/mac_md/rules.mk new file mode 100644 index 0000000000..064a6f54c1 --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/mac_md/rules.mk @@ -0,0 +1,2 @@ +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/alt/keymaps/reywood/README.md b/keyboards/massdrop/alt/keymaps/reywood/README.md new file mode 100644 index 0000000000..5ee630dfb8 --- /dev/null +++ b/keyboards/massdrop/alt/keymaps/reywood/README.md @@ -0,0 +1,5 @@ +# THIS KEYMAP IS BROKEN + +The CTRL and ALT have both been switched to using the QMK RGB Matrix system, +rendering any custom effects that used the old, custom Massdrop lighting system, +BROKEN. diff --git a/keyboards/massdrop/alt/keymaps/reywood/rules.mk b/keyboards/massdrop/alt/keymaps/reywood/rules.mk index b5b961a0f3..956d1c700c 100644 --- a/keyboards/massdrop/alt/keymaps/reywood/rules.mk +++ b/keyboards/massdrop/alt/keymaps/reywood/rules.mk @@ -1,6 +1,4 @@ # project specific files -SRC = led_programs.c -SRC += matrix.c SRC += rgb_matrix_user.c #For platform and packs @@ -32,3 +30,6 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift + +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/alt/rules.mk b/keyboards/massdrop/alt/rules.mk index c5539158f5..aa45c68056 100644 --- a/keyboards/massdrop/alt/rules.mk +++ b/keyboards/massdrop/alt/rules.mk @@ -1,6 +1,6 @@ # project specific files -SRC = led_programs.c -SRC += matrix.c +SRC = matrix.c +SRC += config_led.c #For platform and packs ARM_ATSAM = SAMD51J18A @@ -31,3 +31,6 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift + +# Custom RGB matrix handling +RGB_MATRIX_ENABLE = custom diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h index 71ccac0f39..df2e509216 100644 --- a/keyboards/massdrop/ctrl/config.h +++ b/keyboards/massdrop/ctrl/config.h @@ -119,3 +119,10 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION + +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_LED_PROCESS_LIMIT 15 +#define RGB_MATRIX_LED_FLUSH_LIMIT 10 +#define RGB_MATRIX_EXTRA_TOG + +#include "config_led.h" diff --git a/keyboards/massdrop/ctrl/config_led.c b/keyboards/massdrop/ctrl/config_led.c new file mode 100644 index 0000000000..afdbf3a222 --- /dev/null +++ b/keyboards/massdrop/ctrl/config_led.c @@ -0,0 +1,144 @@ +#ifdef RGB_MATRIX_ENABLE +#include "ctrl.h" + +#include "led_matrix.h" +#include "rgb_matrix.h" +#include "config_led.h" + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + // KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS + { { 0|(0<<4) }, { 7, 5 }, 0 }, + { { 0|(1<<4) }, { 31, 5 }, 0 }, + { { 0|(2<<4) }, { 43, 5 }, 0 }, + { { 0|(3<<4) }, { 55, 5 }, 0 }, + { { 0|(4<<4) }, { 67, 5 }, 0 }, + { { 0|(5<<4) }, { 85, 5 }, 0 }, + { { 0|(6<<4) }, { 97, 5 }, 0 }, + { { 0|(7<<4) }, { 109, 5 }, 0 }, + { { 6|(0<<4) }, { 121, 5 }, 0 }, + { { 6|(1<<4) }, { 139, 5 }, 0 }, + { { 6|(2<<4) }, { 151, 5 }, 0 }, + { { 6|(3<<4) }, { 163, 5 }, 0 }, + { { 6|(4<<4) }, { 175, 5 }, 0 }, + { { 6|(5<<4) }, { 193, 5 }, 0 }, + { { 6|(6<<4) }, { 205, 5 }, 1 }, + { { 6|(7<<4) }, { 217, 5 }, 0 }, + // KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP + { { 1|(0<<4) }, { 7, 20 }, 0 }, + { { 1|(1<<4) }, { 19, 20 }, 0 }, + { { 1|(2<<4) }, { 31, 20 }, 0 }, + { { 1|(3<<4) }, { 43, 20 }, 0 }, + { { 1|(4<<4) }, { 55, 20 }, 0 }, + { { 1|(5<<4) }, { 67, 20 }, 0 }, + { { 1|(6<<4) }, { 79, 20 }, 0 }, + { { 1|(7<<4) }, { 91, 20 }, 0 }, + { { 7|(0<<4) }, { 103, 20 }, 0 }, + { { 7|(1<<4) }, { 115, 20 }, 0 }, + { { 7|(2<<4) }, { 127, 20 }, 0 }, + { { 7|(3<<4) }, { 139, 20 }, 0 }, + { { 7|(4<<4) }, { 151, 20 }, 0 }, + { { 7|(5<<4) }, { 169, 20 }, 0 }, + { { 7|(6<<4) }, { 193, 20 }, 0 }, + { { 7|(7<<4) }, { 205, 20 }, 0 }, + { { 9|(7<<4) }, { 217, 20 }, 0 }, + // KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN + { { 2|(0<<4) }, { 10, 30 }, 0 }, + { { 2|(1<<4) }, { 25, 30 }, 0 }, + { { 2|(2<<4) }, { 37, 30 }, 0 }, + { { 2|(3<<4) }, { 49, 30 }, 0 }, + { { 2|(4<<4) }, { 61, 30 }, 0 }, + { { 2|(5<<4) }, { 73, 30 }, 0 }, + { { 2|(6<<4) }, { 85, 30 }, 0 }, + { { 2|(7<<4) }, { 97, 30 }, 0 }, + { { 8|(0<<4) }, { 109, 30 }, 0 }, + { { 8|(1<<4) }, { 121, 30 }, 0 }, + { { 8|(2<<4) }, { 133, 30 }, 0 }, + { { 8|(3<<4) }, { 145, 30 }, 0 }, + { { 8|(4<<4) }, { 157, 30 }, 0 }, + { { 8|(5<<4) }, { 172, 30 }, 0 }, + { { 8|(6<<4) }, { 193, 30 }, 0 }, + { { 8|(7<<4) }, { 205, 30 }, 0 }, + { { 9|(6<<4) }, { 217, 30 }, 0 }, + // KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT + { { 3|(0<<4) }, { 11, 39 }, 1 }, + { { 3|(1<<4) }, { 28, 39 }, 0 }, + { { 3|(2<<4) }, { 40, 39 }, 0 }, + { { 3|(3<<4) }, { 52, 39 }, 0 }, + { { 3|(4<<4) }, { 64, 39 }, 0 }, + { { 3|(5<<4) }, { 76, 39 }, 0 }, + { { 3|(6<<4) }, { 88, 39 }, 0 }, + { { 3|(7<<4) }, { 100, 39 }, 0 }, + { { 9|(0<<4) }, { 112, 39 }, 0 }, + { { 9|(1<<4) }, { 124, 39 }, 0 }, + { { 9|(2<<4) }, { 136, 39 }, 0 }, + { { 9|(3<<4) }, { 148, 39 }, 0 }, + { { 9|(4<<4) }, { 168, 39 }, 0 }, + // KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP + { { 4|(0<<4) }, { 14, 49 }, 0 }, + { { 4|(1<<4) }, { 34, 49 }, 0 }, + { { 4|(2<<4) }, { 46, 49 }, 0 }, + { { 4|(3<<4) }, { 58, 49 }, 0 }, + { { 4|(4<<4) }, { 70, 49 }, 0 }, + { { 4|(5<<4) }, { 82, 49 }, 0 }, + { { 4|(6<<4) }, { 94, 49 }, 0 }, + { { 4|(7<<4) }, { 106, 49 }, 0 }, + { { 10|(0<<4) }, { 118, 49 }, 0 }, + { { 10|(1<<4) }, { 130, 49 }, 0 }, + { { 10|(2<<4) }, { 142, 49 }, 0 }, + { { 10|(3<<4) }, { 165, 49 }, 0 }, + { { 9|(5<<4) }, { 205, 49 }, 0 }, + // KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + { { 5|(0<<4) }, { 8, 59 }, 0 }, + { { 5|(1<<4) }, { 23, 59 }, 0 }, + { { 5|(2<<4) }, { 38, 59 }, 0 }, + { { 5|(3<<4) }, { 83, 59 }, 0 }, + { { 5|(4<<4) }, { 129, 59 }, 0 }, + { { 5|(5<<4) }, { 144, 59 }, 0 }, + { { 5|(6<<4) }, { 159, 59 }, 0 }, + { { 5|(7<<4) }, { 174, 59 }, 0 }, + { { 10|(4<<4) }, { 193, 59 }, 0 }, + { { 10|(5<<4) }, { 205, 59 }, 0 }, + { { 10|(6<<4) }, { 217, 59 }, 0 }, + // Underglow / Border + { { 0xFF }, { 222, 64 }, 0 }, + { { 0xFF }, { 204, 64 }, 0 }, + { { 0xFF }, { 186, 64 }, 0 }, + { { 0xFF }, { 167, 64 }, 0 }, + { { 0xFF }, { 149, 64 }, 0 }, + { { 0xFF }, { 130, 64 }, 0 }, + { { 0xFF }, { 112, 64 }, 0 }, + { { 0xFF }, { 94, 64 }, 0 }, + { { 0xFF }, { 75, 64 }, 0 }, + { { 0xFF }, { 57, 64 }, 0 }, + { { 0xFF }, { 38, 64 }, 0 }, + { { 0xFF }, { 20, 64 }, 0 }, + { { 0xFF }, { 0, 64 }, 0 }, + { { 0xFF }, { 0, 47 }, 0 }, + { { 0xFF }, { 0, 32 }, 0 }, + { { 0xFF }, { 0, 17 }, 0 }, + { { 0xFF }, { 0, 0 }, 0 }, + { { 0xFF }, { 20, 0 }, 0 }, + { { 0xFF }, { 38, 0 }, 0 }, + { { 0xFF }, { 57, 0 }, 0 }, + { { 0xFF }, { 75, 0 }, 0 }, + { { 0xFF }, { 94, 0 }, 0 }, + { { 0xFF }, { 112, 0 }, 0 }, + { { 0xFF }, { 130, 0 }, 0 }, + { { 0xFF }, { 149, 0 }, 0 }, + { { 0xFF }, { 167, 0 }, 0 }, + { { 0xFF }, { 186, 0 }, 0 }, + { { 0xFF }, { 204, 0 }, 0 }, + { { 0xFF }, { 222, 1 }, 0 }, + { { 0xFF }, { 224, 17 }, 0 }, + { { 0xFF }, { 224, 32 }, 0 }, + { { 0xFF }, { 224, 47 }, 0 }, +}; + +#ifdef USB_LED_INDICATOR_ENABLE +void rgb_matrix_indicators_kb(void) +{ + led_matrix_indicators(); +} +#endif // USB_LED_INDICATOR_ENABLE + +#endif diff --git a/keyboards/massdrop/ctrl/config_led.h b/keyboards/massdrop/ctrl/config_led.h index 471ab7007d..0c91a0c80b 100644 --- a/keyboards/massdrop/ctrl/config_led.h +++ b/keyboards/massdrop/ctrl/config_led.h @@ -15,11 +15,11 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef _config_led_h_ -#define _config_led_h_ +#pragma once //Define number of ISSI3733 drivers being used (1...16) #define ISSI3733_DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL ISSI3733_LED_COUNT //Hardware address of each driver (Refer to ISSI3733 pdf "Table 1 Slave Address" and keyboard schematic) #define ISSI3773_DRIVER_ADDRESSES { 0xA0, 0xBE } @@ -30,21 +30,24 @@ along with this program. If not, see . //Count of LED bodies #define ISSI3733_LED_COUNT 119 -//Default Global Current Register value (Default brightness 0 - 255) -#define ISSI3733_GCR_DEFAULT 128 - #define LED_GCR_MAX 165 //Max GCR value (0 - 255) WARNING: Raising this value may overload the LED drivers and USB bus #define LED_GCR_STEP 10 //GCR increment/decrement value -//Automatic power rollback and recovery -#define V5_HIGH 2540 //5V high level (After low power detect, point at which LEDs are allowed to use more power ) -#define V5_LOW 2480 //5V low level (LED power rolled back to stay above this limit) -#define V5_CAT 2200 //5V catastrophic level (Host USB port potential to shut down) - +#ifdef USE_MASSDROP_CONFIGURATOR #define ANIMATION_SPEED_STEP 1 +#define BREATHE_STEP 1 #define BREATHE_MIN_STEP 0 #define BREATHE_MAX_STEP 255 +#endif + +//Default Global Current Register value (Default brightness 0 - 255) +#define ISSI3733_GCR_DEFAULT LED_GCR_MAX + +//Automatic power rollback and recovery +#define V5_HIGH 2540 //5V high level (After low power detect, point at which LEDs are allowed to use more power ) +#define V5_LOW 2480 //5V low level (LED power rolled back to stay above this limit) +#define V5_CAT 2200 //5V catastrophic level (Host USB port potential to shut down) //LED Mapping - More practically generated from a spreadsheet program //id: ID of the LED (Sync with PCB callouts) @@ -187,5 +190,3 @@ along with this program. If not, see . #define USB_LED_COMPOSE_SCANCODE 255 #define USB_LED_KANA_SCANCODE 255 #endif //USB_LED_INDICATOR_ENABLE - -#endif //_config_led_h_ diff --git a/keyboards/massdrop/ctrl/keymaps/default/keymap.c b/keyboards/massdrop/ctrl/keymaps/default/keymap.c index cdb627f9c4..182abbbad4 100644 --- a/keyboards/massdrop/ctrl/keymaps/default/keymap.c +++ b/keyboards/massdrop/ctrl/keymaps/default/keymap.c @@ -1,25 +1,13 @@ #include QMK_KEYBOARD_H enum ctrl_keycodes { - L_BRI = SAFE_RANGE, //LED Brightness Increase - L_BRD, //LED Brightness Decrease - L_PTN, //LED Pattern Select Next - L_PTP, //LED Pattern Select Previous - L_PSI, //LED Pattern Speed Increase - L_PSD, //LED Pattern Speed Decrease - L_T_MD, //LED Toggle Mode - L_T_ONF, //LED Toggle On / Off - L_ON, //LED On - L_OFF, //LED Off - L_T_BR, //LED Toggle Breath Effect - L_T_PTD, //LED Toggle Scrolling Pattern Direction - U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active - U_T_AGCR, //USB Toggle Automatic GCR control - DBG_TOG, //DEBUG Toggle On / Off - DBG_MTRX, //DEBUG Toggle Matrix Prints - DBG_KBD, //DEBUG Toggle Keyboard Prints - DBG_MOU, //DEBUG Toggle Mouse Prints - MD_BOOT, //Restart into bootloader after hold timeout + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout }; #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode @@ -36,21 +24,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ ), [1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MSTP, KC_VOLU, \ - L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_VOLD, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), /* [X] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), */ }; @@ -71,82 +59,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; switch (keycode) { - case L_BRI: - if (record->event.pressed) { - if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; - else gcr_desired += LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_BRD: - if (record->event.pressed) { - if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; - else gcr_desired -= LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_PTN: - if (record->event.pressed) { - if (led_animation_id == led_setups_count - 1) led_animation_id = 0; - else led_animation_id++; - } - return false; - case L_PTP: - if (record->event.pressed) { - if (led_animation_id == 0) led_animation_id = led_setups_count - 1; - else led_animation_id--; - } - return false; - case L_PSI: - if (record->event.pressed) { - led_animation_speed += ANIMATION_SPEED_STEP; - } - return false; - case L_PSD: - if (record->event.pressed) { - led_animation_speed -= ANIMATION_SPEED_STEP; - if (led_animation_speed < 0) led_animation_speed = 0; - } - return false; - case L_T_MD: - if (record->event.pressed) { - led_lighting_mode++; - if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; - } - return false; - case L_T_ONF: - if (record->event.pressed) { - led_enabled = !led_enabled; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_ON: - if (record->event.pressed) { - led_enabled = 1; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_OFF: - if (record->event.pressed) { - led_enabled = 0; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_T_BR: - if (record->event.pressed) { - led_animation_breathing = !led_animation_breathing; - if (led_animation_breathing) { - gcr_breathe = gcr_desired; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_dir = 1; - } - } - return false; - case L_T_PTD: - if (record->event.pressed) { - led_animation_direction = !led_animation_direction; - } - return false; case U_T_AUTO: if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); diff --git a/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c b/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c new file mode 100644 index 0000000000..16f88ffe1d --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c @@ -0,0 +1,226 @@ +#include QMK_KEYBOARD_H + +enum ctrl_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase //Working + L_BRD, //LED Brightness Decrease //Working + L_PTN, //LED Pattern Select Next //Working + L_PTP, //LED Pattern Select Previous //Working + L_PSI, //LED Pattern Speed Increase //Working + L_PSD, //LED Pattern Speed Decrease //Working + L_T_MD, //LED Toggle Mode //Working + L_T_ONF, //LED Toggle On / Off //Broken + L_ON, //LED On //Broken + L_OFF, //LED Off //Broken + L_T_BR, //LED Toggle Breath Effect //Working + L_T_PTD, //LED Toggle Scrolling Pattern Direction //Working + U_T_AGCR, //USB Toggle Automatic GCR control //Working + DBG_TOG, //DEBUG Toggle On / Off // + DBG_MTRX, //DEBUG Toggle Matrix Prints // + DBG_KBD, //DEBUG Toggle Keyboard Prints // + DBG_MOU, //DEBUG Toggle Mouse Prints // + MD_BOOT //Restart into bootloader after hold timeout //Working +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} + +led_instruction_t led_instructions[] = { + //LEDs are normally inactive, no processing is performed on them + //Flags are used in matching criteria for an LED to be active and indicate how to color it + //Flags can be found in tmk_core/protocol/arm_atsam/led_matrix.h (prefixed with LED_FLAG_) + //LED IDs can be found in config_led.h in the keyboard's directory + //Examples are below + + //All LEDs use the user's selected pattern (this is the factory default) + { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + + //Specific LEDs use the user's selected pattern while all others are off + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_ROTATE_PATTERN, .id0 = 0xFFFFFFFF, .id1 = 0xAAAAAAAA, .id2 = 0x55555555, .id3 = 0x11111111 }, + + //Specific LEDs use specified RGB values while all others are off + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFF, .id1 = 0x00FF, .id2 = 0x0000FF00, .id3 = 0xFF000000, .r = 75, .g = 150, .b = 225 }, + + //All LEDs use the user's selected pattern + //On layer 1, all key LEDs (except the top row which keeps active pattern) are red while all edge LEDs are green + //When layer 1 is active, key LEDs use red (id0 32 - 17: 1111 1111 1111 1111 0000 0000 0000 0000 = 0xFFFF0000) (except top row 16 - 1) + //When layer 1 is active, key LEDs use red (id1 64 - 33: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //When layer 1 is active, key LEDs use red (id2 87 - 65: 0000 0000 0111 1111 1111 1111 1111 1111 = 0x007FFFFF) + //When layer 1 is active, edge LEDs use green (id2 95 - 88: 1111 1111 1000 0000 0000 0000 0000 0000 = 0xFF800000) + //When layer 1 is active, edge LEDs use green (id3 119 - 96: 0000 0000 1111 1111 1111 1111 1111 1111 = 0x00FFFFFF) + // { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_MATCH_LAYER | LED_FLAG_USE_RGB, .id0 = 0xFFFF0000, .id1 = 0xFFFFFFFF, .id2 = 0x007FFFFF, .r = 255, .layer = 1 }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_MATCH_LAYER | LED_FLAG_USE_RGB, .id2 = 0xFF800000, .id3 = 0x00FFFFFF, .g = 127, .layer = 1 }, + + //All key LEDs use red while edge LEDs use the active pattern + //All key LEDs use red (id0 32 - 1: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //All key LEDs use red (id1 64 - 33: 1111 1111 1111 1111 1111 1111 1111 1111 = 0xFFFFFFFF) + //All key LEDs use red (id2 87 - 65: 0000 0000 0111 1111 1111 1111 1111 1111 = 0x007FFFFF) + //Edge uses active pattern (id2 95 - 88: 1111 1111 1000 0000 0000 0000 0000 0000 = 0xFF800000) + //Edge uses active pattern (id3 119 - 96: 0000 0000 1111 1111 1111 1111 1111 1111 = 0x00FFFFFF) + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFFFFFFFF, .id1 = 0xFFFFFFFF, .id2 = 0x007FFFFF, .r = 255 }, + // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_ROTATE_PATTERN , .id2 = 0xFF800000, .id3 = 0x00FFFFFF }, + + //end must be set to 1 to indicate end of instruction set + { .end = 1 } +}; diff --git a/keyboards/massdrop/ctrl/keymaps/default_md/rules.mk b/keyboards/massdrop/ctrl/keymaps/default_md/rules.mk new file mode 100644 index 0000000000..064a6f54c1 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/default_md/rules.mk @@ -0,0 +1,2 @@ +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/ctrl/keymaps/mac/keymap.c b/keyboards/massdrop/ctrl/keymaps/mac/keymap.c index e41b5eba20..41cf827572 100644 --- a/keyboards/massdrop/ctrl/keymaps/mac/keymap.c +++ b/keyboards/massdrop/ctrl/keymaps/mac/keymap.c @@ -1,25 +1,13 @@ #include QMK_KEYBOARD_H enum ctrl_keycodes { - L_BRI = SAFE_RANGE, //LED Brightness Increase - L_BRD, //LED Brightness Decrease - L_PTN, //LED Pattern Select Next - L_PTP, //LED Pattern Select Previous - L_PSI, //LED Pattern Speed Increase - L_PSD, //LED Pattern Speed Decrease - L_T_MD, //LED Toggle Mode - L_T_ONF, //LED Toggle On / Off - L_ON, //LED On - L_OFF, //LED Off - L_T_BR, //LED Toggle Breath Effect - L_T_PTD, //LED Toggle Scrolling Pattern Direction - U_T_AUTO, //USB Extra Port Toggle Auto Detect / Always Active - U_T_AGCR, //USB Toggle Automatic GCR control - DBG_TOG, //DEBUG Toggle On / Off - DBG_MTRX, //DEBUG Toggle Matrix Prints - DBG_KBD, //DEBUG Toggle Keyboard Prints - DBG_MOU, //DEBUG Toggle Mouse Prints - MD_BOOT, //Restart into bootloader after hold timeout + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout }; #define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode @@ -36,21 +24,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ ), [1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MSTP, KC_VOLU, \ - L_T_BR, L_PSD, L_BRI, L_PSI, KC_TRNS, KC_TRNS, KC_TRNS, U_T_AUTO,U_T_AGCR,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_VOLD, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, L_T_MD, L_T_ONF, KC_TRNS, KC_TRNS, MD_BOOT, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), /* [X] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, TG_NKRO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ), */ }; @@ -71,82 +59,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; switch (keycode) { - case L_BRI: - if (record->event.pressed) { - if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; - else gcr_desired += LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_BRD: - if (record->event.pressed) { - if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; - else gcr_desired -= LED_GCR_STEP; - if (led_animation_breathing) gcr_breathe = gcr_desired; - } - return false; - case L_PTN: - if (record->event.pressed) { - if (led_animation_id == led_setups_count - 1) led_animation_id = 0; - else led_animation_id++; - } - return false; - case L_PTP: - if (record->event.pressed) { - if (led_animation_id == 0) led_animation_id = led_setups_count - 1; - else led_animation_id--; - } - return false; - case L_PSI: - if (record->event.pressed) { - led_animation_speed += ANIMATION_SPEED_STEP; - } - return false; - case L_PSD: - if (record->event.pressed) { - led_animation_speed -= ANIMATION_SPEED_STEP; - if (led_animation_speed < 0) led_animation_speed = 0; - } - return false; - case L_T_MD: - if (record->event.pressed) { - led_lighting_mode++; - if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; - } - return false; - case L_T_ONF: - if (record->event.pressed) { - led_enabled = !led_enabled; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_ON: - if (record->event.pressed) { - led_enabled = 1; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_OFF: - if (record->event.pressed) { - led_enabled = 0; - I2C3733_Control_Set(led_enabled); - } - return false; - case L_T_BR: - if (record->event.pressed) { - led_animation_breathing = !led_animation_breathing; - if (led_animation_breathing) { - gcr_breathe = gcr_desired; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_dir = 1; - } - } - return false; - case L_T_PTD: - if (record->event.pressed) { - led_animation_direction = !led_animation_direction; - } - return false; case U_T_AUTO: if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); diff --git a/keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c b/keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c new file mode 100644 index 0000000000..6dfc213786 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c @@ -0,0 +1,196 @@ +#include QMK_KEYBOARD_H + +enum ctrl_keycodes { + L_BRI = SAFE_RANGE, //LED Brightness Increase //Working + L_BRD, //LED Brightness Decrease //Working + L_PTN, //LED Pattern Select Next //Working + L_PTP, //LED Pattern Select Previous //Working + L_PSI, //LED Pattern Speed Increase //Working + L_PSD, //LED Pattern Speed Decrease //Working + L_T_MD, //LED Toggle Mode //Working + L_T_ONF, //LED Toggle On / Off //Broken + L_ON, //LED On //Broken + L_OFF, //LED Off //Broken + L_T_BR, //LED Toggle Breath Effect //Working + L_T_PTD, //LED Toggle Scrolling Pattern Direction //Working + U_T_AGCR, //USB Toggle Automatic GCR control //Working + DBG_TOG, //DEBUG Toggle On / Off // + DBG_MTRX, //DEBUG Toggle Matrix Prints // + DBG_KBD, //DEBUG Toggle Keyboard Prints // + DBG_MOU, //DEBUG Toggle Mouse Prints // + MD_BOOT //Restart into bootloader after hold timeout //Working +}; + +#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { +}; + +#define MODS_SHIFT (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)) +#define MODS_CTRL (get_mods() & MOD_BIT(KC_LCTL) || get_mods() & MOD_BIT(KC_RCTRL)) +#define MODS_ALT (get_mods() & MOD_BIT(KC_LALT) || get_mods() & MOD_BIT(KC_RALT)) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + switch (keycode) { + case L_BRI: + if (record->event.pressed) { + if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX; + else gcr_desired += LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_BRD: + if (record->event.pressed) { + if (LED_GCR_STEP > gcr_desired) gcr_desired = 0; + else gcr_desired -= LED_GCR_STEP; + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + return false; + case L_PTN: + if (record->event.pressed) { + if (led_animation_id == led_setups_count - 1) led_animation_id = 0; + else led_animation_id++; + } + return false; + case L_PTP: + if (record->event.pressed) { + if (led_animation_id == 0) led_animation_id = led_setups_count - 1; + else led_animation_id--; + } + return false; + case L_PSI: + if (record->event.pressed) { + led_animation_speed += ANIMATION_SPEED_STEP; + } + return false; + case L_PSD: + if (record->event.pressed) { + led_animation_speed -= ANIMATION_SPEED_STEP; + if (led_animation_speed < 0) led_animation_speed = 0; + } + return false; + case L_T_MD: + if (record->event.pressed) { + led_lighting_mode++; + if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL; + } + return false; + case L_T_ONF: + if (record->event.pressed) { + led_enabled = !led_enabled; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_ON: + if (record->event.pressed) { + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_OFF: + if (record->event.pressed) { + led_enabled = 0; + I2C3733_Control_Set(led_enabled); + } + return false; + case L_T_BR: + if (record->event.pressed) { + led_animation_breathing = !led_animation_breathing; + if (led_animation_breathing) { + gcr_breathe = gcr_desired; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + } + } + return false; + case L_T_PTD: + if (record->event.pressed) { + led_animation_direction = !led_animation_direction; + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} + +led_instruction_t led_instructions[] = { + //Please see ../default_md/keymap.c for examples + + //All LEDs use the user's selected pattern (this is the factory default) + { .flags = LED_FLAG_USE_ROTATE_PATTERN }, + + //end must be set to 1 to indicate end of instruction set + { .end = 1 } +}; diff --git a/keyboards/massdrop/ctrl/keymaps/mac_md/rules.mk b/keyboards/massdrop/ctrl/keymaps/mac_md/rules.mk new file mode 100644 index 0000000000..064a6f54c1 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/mac_md/rules.mk @@ -0,0 +1,2 @@ +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/ctrl/keymaps/responsive_pattern/README.md b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/README.md new file mode 100644 index 0000000000..5ee630dfb8 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/README.md @@ -0,0 +1,5 @@ +# THIS KEYMAP IS BROKEN + +The CTRL and ALT have both been switched to using the QMK RGB Matrix system, +rendering any custom effects that used the old, custom Massdrop lighting system, +BROKEN. diff --git a/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c index 0bdc152140..58911aa757 100644 --- a/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c +++ b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c @@ -15,7 +15,6 @@ extern issi3733_led_t *lede; extern issi3733_led_t led_map[]; -extern led_disp_t disp; enum ctrl_keycodes { L_BRI = SAFE_RANGE, //LED Brightness Increase @@ -238,8 +237,6 @@ void led_matrix_run(void) { led_cur = led_map; - disp.frame += 1; - breathe_mult = 1; if (led_animation_breathing) @@ -314,7 +311,7 @@ void led_matrix_run(void) } float pomod; - pomod = (float)(disp.frame % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; + pomod = (float)(g_tick % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; //Add in any moving effects if ((!led_animation_direction && f[fcur].ef & EF_SCR_R) || (led_animation_direction && (f[fcur].ef & EF_SCR_L))) diff --git a/keyboards/massdrop/ctrl/keymaps/responsive_pattern/rules.mk b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/rules.mk new file mode 100644 index 0000000000..064a6f54c1 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/responsive_pattern/rules.mk @@ -0,0 +1,2 @@ +# This keymap requires Massdrop Configurator support +OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR diff --git a/keyboards/massdrop/ctrl/led_programs.c b/keyboards/massdrop/ctrl/led_programs.c deleted file mode 100644 index ca27016454..0000000000 --- a/keyboards/massdrop/ctrl/led_programs.c +++ /dev/null @@ -1,120 +0,0 @@ -/* -Copyright 2018 Massdrop Inc. - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "ctrl.h" -#include "led_matrix.h" - -//Teal <-> Salmon -led_setup_t leds_teal_salmon[] = { - { .hs = 0, .he = 33, .rs = 24, .re = 24, .gs = 215, .ge = 215, .bs = 204, .be = 204, .ef = EF_NONE }, - { .hs = 33, .he = 66, .rs = 24, .re = 255, .gs = 215, .ge = 114, .bs = 204, .be = 118, .ef = EF_NONE }, - { .hs = 66, .he = 100, .rs = 255, .re = 255, .gs = 114, .ge = 114, .bs = 118, .be = 118, .ef = EF_NONE }, - { .end = 1 }, -}; - -//Yellow -led_setup_t leds_yellow[] = { - { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE }, - { .end = 1 }, -}; - -//Off -led_setup_t leds_off[] = { - { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE }, - { .end = 1 }, -}; - -//Red -led_setup_t leds_red[] = { - { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_NONE }, - { .end = 1 }, -}; - -//Green -led_setup_t leds_green[] = { - { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_NONE }, - { .end = 1 }, -}; - -//Blue -led_setup_t leds_blue[] = { - { .hs = 0, .he = 100, .rs = 0, .re = 0, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_NONE }, - { .end = 1 }, -}; - -//White -led_setup_t leds_white[] = { - { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE }, - { .end = 1 }, -}; - -//White with moving red stripe -led_setup_t leds_white_with_red_stripe[] = { - { .hs = 0, .he = 100, .rs = 255, .re = 255, .gs = 255, .ge = 255, .bs = 255, .be = 255, .ef = EF_NONE }, - { .hs = 0, .he = 15, .rs = 0, .re = 0, .gs = 0, .ge = 255, .bs = 0, .be = 255, .ef = EF_SCR_R | EF_SUBTRACT }, - { .hs = 15, .he = 30, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 0, .ef = EF_SCR_R | EF_SUBTRACT }, - { .end = 1 }, -}; - -//Black with moving red stripe -led_setup_t leds_black_with_red_stripe[] = { - { .hs = 0, .he = 15, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R }, - { .hs = 15, .he = 30, .rs = 255, .re = 0, .gs = 0, .ge = 0, .bs = 0, .be = 0, .ef = EF_SCR_R }, - { .end = 1 }, -}; - -//Rainbow no scrolling -led_setup_t leds_rainbow_ns[] = { - { .hs = 0, .he = 16.67, .rs = 255, .re = 255, .gs = 0, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER }, - { .hs = 16.67, .he = 33.33, .rs = 255, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER }, - { .hs = 33.33, .he = 50, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 255, .ef = EF_OVER }, - { .hs = 50, .he = 66.67, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER }, - { .hs = 66.67, .he = 83.33, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER }, - { .hs = 83.33, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 0, .ef = EF_OVER }, - { .end = 1 }, -}; - -//Rainbow scrolling -led_setup_t leds_rainbow_s[] = { - { .hs = 0, .he = 16.67, .rs = 255, .re = 255, .gs = 0, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER | EF_SCR_R }, - { .hs = 16.67, .he = 33.33, .rs = 255, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 0, .ef = EF_OVER | EF_SCR_R }, - { .hs = 33.33, .he = 50, .rs = 0, .re = 0, .gs = 255, .ge = 255, .bs = 0, .be = 255, .ef = EF_OVER | EF_SCR_R }, - { .hs = 50, .he = 66.67, .rs = 0, .re = 0, .gs = 255, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R }, - { .hs = 66.67, .he = 83.33, .rs = 0, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 255, .ef = EF_OVER | EF_SCR_R }, - { .hs = 83.33, .he = 100, .rs = 255, .re = 255, .gs = 0, .ge = 0, .bs = 255, .be = 0, .ef = EF_OVER | EF_SCR_R }, - { .end = 1 }, -}; - -//Add new LED animations here using one from above as example -//The last entry must be { .end = 1 } -//Add the new animation name to the list below following its format - -void *led_setups[] = { - leds_rainbow_s, - leds_rainbow_ns, - leds_teal_salmon, - leds_yellow, - leds_red, - leds_green, - leds_blue, - leds_white, - leds_white_with_red_stripe, - leds_black_with_red_stripe, - leds_off -}; - -const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]); diff --git a/keyboards/massdrop/ctrl/rules.mk b/keyboards/massdrop/ctrl/rules.mk index c5539158f5..aa45c68056 100644 --- a/keyboards/massdrop/ctrl/rules.mk +++ b/keyboards/massdrop/ctrl/rules.mk @@ -1,6 +1,6 @@ # project specific files -SRC = led_programs.c -SRC += matrix.c +SRC = matrix.c +SRC += config_led.c #For platform and packs ARM_ATSAM = SAMD51J18A @@ -31,3 +31,6 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift + +# Custom RGB matrix handling +RGB_MATRIX_ENABLE = custom diff --git a/keyboards/planck/keymaps/davidrambo/config.h b/keyboards/planck/keymaps/davidrambo/config.h index 2decb3dc8d..ccb18de3dd 100644 --- a/keyboards/planck/keymaps/davidrambo/config.h +++ b/keyboards/planck/keymaps/davidrambo/config.h @@ -1,8 +1,6 @@ -#ifndef CONFIG_USER_H +#pragma once -#define CONFIG_USER_H #define TAPPING_TERM 200 -#include "../../config.h" #define PERMISSIVE_HOLD -#endif + diff --git a/keyboards/planck/keymaps/davidrambo/keymap.c b/keyboards/planck/keymaps/davidrambo/keymap.c index 2bf13f24ab..b827911944 100644 --- a/keyboards/planck/keymaps/davidrambo/keymap.c +++ b/keyboards/planck/keymaps/davidrambo/keymap.c @@ -1,5 +1,4 @@ -#pragma message "You may need to add LAYOUT_planck_grid to your keymap layers - see default for an example" -#include "planck.h" +#include QMK_KEYBOARD_H #define A_BSPC LALT(KC_BSPC) #define A_LEFT LALT(KC_LEFT) @@ -8,7 +7,7 @@ #define GSL LGUI(S(KC_LEFT)) #define GSR LGUI(S(KC_RGHT)) #define G_TAB LGUI(KC_TAB) -#define G_GRV LGUI(KC_GRV) // MAC: switch between windows within an application +#define G_GRV LGUI(KC_GRV) #define SftEnt SFT_T(KC_ENT) #define NAV LT(2, KC_TAB) @@ -21,8 +20,7 @@ enum { SFT_LCK }; -//alias for tapdance -#define SftLck TD(SFT_LCK) +#define SftLck TD(SFT_LCK) /* alias for tapdance */ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -38,12 +36,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ -[_COLEMAK] = { - {KC_GESC, KC_Q , KC_W , KC_F , KC_P , KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, - {NAV , KC_A , KC_R , KC_S , KC_T , KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, - {SftLck , KC_Z , KC_X , KC_C , KC_V , KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SftEnt }, - {KC_DEL , KC_LGUI, KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} - }, +[_COLEMAK] = LAYOUT_planck_grid( + KC_GESC, KC_Q , KC_W , KC_F , KC_P , KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + NAV , KC_A , KC_R , KC_S , KC_T , KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + SftLck , KC_Z , KC_X , KC_C , KC_V , KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SftEnt , + KC_DEL , KC_LGUI, KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), /* Symbol * ,-----------------------------------------------------------------------------------. @@ -51,26 +49,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+-------------+------+------+------+------+------| * | \| | ! | @ | # | $ | % | ^ | & | * | ( | ) | =+ | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | Home | End | ScUp | ScDn | F1 | F2 | -_ |Pg Up | | / | | + * | | Home | End | ScUp | ScDn | BRMD | BRMU | -_ |Pg Up | | / | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | `~ | | | |Alt(Bk)| | |Pg Dn | Vol- | Vol+ | | * `-----------------------------------------------------------------------------------' */ -[_SYMBOL] = { - {KC_LBRC, KC_1, KC_2, KC_3, KC_4 , KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_RBRC}, - {KC_BSLS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_EQL }, - {_______, KC_HOME, KC_END, KC_WH_U, KC_WH_D,KC_F1 , KC_F2 , KC_MINS, KC_PGUP, _______, _______, _______}, - {KC_GRV, _______, _______, _______, A_BSPC, _______, _______, _______, KC_PGDN, KC_VOLD, KC_VOLU, KC_MUTE} - }, +[_SYMBOL] = LAYOUT_planck_grid( + KC_LBRC, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_RBRC, + KC_BSLS, KC_EXLM, KC_AT , KC_HASH, KC_DLR , KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_EQL , + _______, KC_HOME, KC_END , _______, _______, KC_BRMD, KC_BRMU, KC_MINS, KC_PGUP, _______, _______, _______, + KC_GRV, _______, _______, _______, A_BSPC , _______, _______, _______, KC_PGDN, KC_VOLD, KC_VOLU, KC_MUTE + ), /* Navigation*/ -[_NAVIGATION] = { - {_______, _______, _______, _______, _______, _______, C_TAB , A_LEFT, KC_UP, A_RGHT , KC_DEL , _______}, - {_______, _______, _______, _______, _______, _______, GSL , KC_LEFT, KC_DOWN, KC_RGHT, GSR , _______}, - {_______, _______, _______, _______, _______, _______, G_TAB , KC_HOME, _______, KC_END, G_GRV , _______}, - {RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} -} +[_NAVIGATION] = LAYOUT_planck_grid( + _______, _______, _______, _______, _______, _______, C_TAB , A_LEFT, KC_UP, A_RGHT , KC_DEL , _______, + _______, _______, _______, _______, _______, _______, GSL , KC_LEFT, KC_DOWN, KC_RGHT, GSR , _______, + _______, _______, _______, _______, _______, _______, G_TAB , KC_HOME, _______, KC_END, G_GRV , _______, + RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) }; // Shift vs capslock function. From bbaserdem's Planck keymap. diff --git a/keyboards/planck/keymaps/davidrambo/rules.mk b/keyboards/planck/keymaps/davidrambo/rules.mk index 5e5ab38458..4272493950 100644 --- a/keyboards/planck/keymaps/davidrambo/rules.mk +++ b/keyboards/planck/keymaps/davidrambo/rules.mk @@ -1,3 +1,3 @@ TAP_DANCE_ENABLE = yes -MOUSEKEY_ENABLE = yes + diff --git a/keyboards/planck/keymaps/piemod/README.md b/keyboards/planck/keymaps/piemod/README.md index f2a051da14..9c29e75db3 100644 --- a/keyboards/planck/keymaps/piemod/README.md +++ b/keyboards/planck/keymaps/piemod/README.md @@ -17,10 +17,6 @@ A keymap for users that need: Still a work-in-progress. Suggestions welcome @ https://github.com/dwrz/piemod. -### Keymap - -![PieMod Keymap](./keymap.png) - ### TODO - [ ] Add Emacs layer. diff --git a/keyboards/quantrik/kyuu/config.h b/keyboards/quantrik/kyuu/config.h new file mode 100644 index 0000000000..655314985d --- /dev/null +++ b/keyboards/quantrik/kyuu/config.h @@ -0,0 +1,245 @@ +/* +Copyright 2019 mechmerlin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Quantrik +#define PRODUCT Kyuu +#define DESCRIPTION A 65% keyboard with blocker + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6 } +#define MATRIX_COL_PINS { F1, F4, F5, F6, F7, C7, C6, F0, B7, D0, D5, D3, D2, D1, B3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/quantrik/kyuu/info.json b/keyboards/quantrik/kyuu/info.json new file mode 100644 index 0000000000..05c1b40b95 --- /dev/null +++ b/keyboards/quantrik/kyuu/info.json @@ -0,0 +1,82 @@ +{ + "keyboard_name": "Kyuu", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT": { + "key_count": 67, + "layout": [ + {"label":"K00 (B6,F1)", "x":0, "y":0}, + {"label":"K01 (B6,F4)", "x":1, "y":0}, + {"label":"K02 (B6,F5)", "x":2, "y":0}, + {"label":"K03 (B6,F6)", "x":3, "y":0}, + {"label":"K04 (B6,F7)", "x":4, "y":0}, + {"label":"K05 (B6,C7)", "x":5, "y":0}, + {"label":"K06 (B6,C6)", "x":6, "y":0}, + {"label":"K07 (B6,F0)", "x":7, "y":0}, + {"label":"K08 (B6,B7)", "x":8, "y":0}, + {"label":"K09 (B6,D0)", "x":9, "y":0}, + {"label":"K0A (B6,D5)", "x":10, "y":0}, + {"label":"K0B (B6,D3)", "x":11, "y":0}, + {"label":"K0C (B6,D2)", "x":12, "y":0}, + {"label":"K0D (B6,D1)", "x":13, "y":0}, + {"label":"K0E (B6,B3)", "x":14, "y":0}, + {"label":"K2E (B4,B3)", "x":15, "y":0}, + {"label":"K10 (B5,F1)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (B5,F4)", "x":1.5, "y":1}, + {"label":"K12 (B5,F5)", "x":2.5, "y":1}, + {"label":"K13 (B5,F6)", "x":3.5, "y":1}, + {"label":"K14 (B5,F7)", "x":4.5, "y":1}, + {"label":"K15 (B5,C7)", "x":5.5, "y":1}, + {"label":"K16 (B5,C6)", "x":6.5, "y":1}, + {"label":"K17 (B5,F0)", "x":7.5, "y":1}, + {"label":"K18 (B5,B7)", "x":8.5, "y":1}, + {"label":"K19 (B5,D0)", "x":9.5, "y":1}, + {"label":"K1A (B5,D5)", "x":10.5, "y":1}, + {"label":"K1B (B5,D3)", "x":11.5, "y":1}, + {"label":"K1C (B5,D2)", "x":12.5, "y":1}, + {"label":"K1D (B5,D1)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E (B5,B3)", "x":15, "y":1}, + {"label":"K20 (B4,F1)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B4,F4)", "x":1.75, "y":2}, + {"label":"K22 (B4,F5)", "x":2.75, "y":2}, + {"label":"K23 (B4,F6)", "x":3.75, "y":2}, + {"label":"K24 (B4,F7)", "x":4.75, "y":2}, + {"label":"K25 (B4,C7)", "x":5.75, "y":2}, + {"label":"K26 (B4,C6)", "x":6.75, "y":2}, + {"label":"K27 (B4,F0)", "x":7.75, "y":2}, + {"label":"K28 (B4,B7)", "x":8.75, "y":2}, + {"label":"K29 (B4,D0)", "x":9.75, "y":2}, + {"label":"K2A (B4,D5)", "x":10.75, "y":2}, + {"label":"K2B (B4,D3)", "x":11.75, "y":2}, + {"label":"K2C (B4,D2)", "x":12.75, "y":2, "w":2.25}, + {"label":"K2D (B4,D1)", "x":15, "y":2}, + {"label":"K30 (D7,F1)", "x":0, "y":3, "w":2.25}, + {"label":"K31 (D7,F4)", "x":2.25, "y":3}, + {"label":"K32 (D7,F5)", "x":3.25, "y":3}, + {"label":"K33 (D7,F6)", "x":4.25, "y":3}, + {"label":"K34 (D7,F7)", "x":5.25, "y":3}, + {"label":"K35 (D7,C7)", "x":6.25, "y":3}, + {"label":"K36 (D7,C6)", "x":7.25, "y":3}, + {"label":"K37 (D7,F0)", "x":8.25, "y":3}, + {"label":"K38 (D7,B7)", "x":9.25, "y":3}, + {"label":"K39 (D7,D0)", "x":10.25, "y":3}, + {"label":"K3A (D7,D5)", "x":11.25, "y":3}, + {"label":"K3B (D7,D3)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3C (D7,D2)", "x":14, "y":3}, + {"label":"K3D (D7,D1)", "x":15, "y":3}, + {"label":"K40 (D6,F1)", "x":0, "y":4, "w":1.5}, + {"label":"K41 (D6,F4)", "x":1.5, "y":4}, + {"label":"K42 (D6,F5)", "x":2.5, "y":4, "w":1.5}, + {"label":"K46 (D6,C6)", "x":4, "y":4, "w":7}, + {"label":"K4A (D6,D5)", "x":11, "y":4, "w":1.5}, + {"label":"K4B (D6,D3)", "x":13, "y":4}, + {"label":"K4C (D6,D2)", "x":14, "y":4}, + {"label":"K4D (D6,D1)", "x":15, "y":4} + ] + } + } + } + \ No newline at end of file diff --git a/keyboards/quantrik/kyuu/keymaps/default/config.h b/keyboards/quantrik/kyuu/keymaps/default/config.h new file mode 100644 index 0000000000..60dd02a9d0 --- /dev/null +++ b/keyboards/quantrik/kyuu/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 mechmerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// place overrides here diff --git a/keyboards/quantrik/kyuu/keymaps/default/keymap.c b/keyboards/quantrik/kyuu/keymaps/default/keymap.c new file mode 100644 index 0000000000..077d7ac5a6 --- /dev/null +++ b/keyboards/quantrik/kyuu/keymaps/default/keymap.c @@ -0,0 +1,74 @@ +/* Copyright 2019 mechmerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_HOME, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_END, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, QMKBEST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/quantrik/kyuu/keymaps/default/readme.md b/keyboards/quantrik/kyuu/keymaps/default/readme.md new file mode 100644 index 0000000000..f87ce36e38 --- /dev/null +++ b/keyboards/quantrik/kyuu/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Kyuu diff --git a/keyboards/quantrik/kyuu/kyuu.c b/keyboards/quantrik/kyuu/kyuu.c new file mode 100644 index 0000000000..e9a72a5749 --- /dev/null +++ b/keyboards/quantrik/kyuu/kyuu.c @@ -0,0 +1,43 @@ +/* Copyright 2019 mechmerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "kyuu.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/quantrik/kyuu/kyuu.h b/keyboards/quantrik/kyuu/kyuu.h new file mode 100644 index 0000000000..82c024f2e7 --- /dev/null +++ b/keyboards/quantrik/kyuu/kyuu.h @@ -0,0 +1,42 @@ +/* Copyright 2019 mechmerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k2E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ + k40, k41, k42, k46, k47, k4A, k4B, k4C, k4D \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, KC_NO, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, k47, KC_NO, KC_NO, k4A, k4B, k4C, k4D, KC_NO }, \ +} + diff --git a/keyboards/quantrik/kyuu/readme.md b/keyboards/quantrik/kyuu/readme.md new file mode 100644 index 0000000000..2b33140980 --- /dev/null +++ b/keyboards/quantrik/kyuu/readme.md @@ -0,0 +1,13 @@ +# kyuu + +Kyuu is a 65% keyboard inspired by the TGR 910's top right blocker. + +Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +Hardware Supported: Quantrik 65% PCB +Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=97810.0), [quantrik.com](https://www.quantrik.com/collections/frontpage/products/kyuu-keyboard) + +Make example for this keyboard (after setting up your build environment): + + make quantrik/kyuu:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/quantrik/kyuu/rules.mk b/keyboards/quantrik/kyuu/rules.mk new file mode 100644 index 0000000000..3229957d9c --- /dev/null +++ b/keyboards/quantrik/kyuu/rules.mk @@ -0,0 +1,81 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/rama/koyu/config.h b/keyboards/rama/koyu/config.h new file mode 100644 index 0000000000..12dc3d02b5 --- /dev/null +++ b/keyboards/rama/koyu/config.h @@ -0,0 +1,127 @@ +/* Copyright 2017 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +// USB Device descriptor parameter +#define VENDOR_ID 0x5241 // "RW" +#define PRODUCT_ID 0x4B59 // "KY" +#define DEVICE_VER 0x0001 +#define MANUFACTURER RAMA.WORKS +#define PRODUCT RAMA KOYU +#define DESCRIPTION RAMA KOYU Keyboard + + + +// key matrix size +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +// KOYU PCB pin-out +#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } +#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } +#define UNUSED_PINS + +// IS31FL3731 driver +#define DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL 72 + +// COL2ROW or ROW2COL +#define DIODE_DIRECTION COL2ROW + +// Set 0 if debouncing isn't needed +#define DEBOUNCING_DELAY 5 + +// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap +#define LOCKING_SUPPORT_ENABLE +// Locking resynchronize hack +#define LOCKING_RESYNC_ENABLE + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +// disable debug print +//#define NO_DEBUG + +// disable print +//#define NO_PRINT + +// disable action features +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define RGB_BACKLIGHT_ENABLED 1 + +// This conditionally compiles the backlight code for KOYU specifics +#define RGB_BACKLIGHT_KOYU + +// enable/disable LEDs based on layout +// they aren't really used if RGB_BACKLIGHT_M60_A defined +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1 +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1 +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1 +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1 + +// disable backlight when USB suspended (PC sleep/hibernate/shutdown) +#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 + +// disable backlight after timeout in minutes, 0 = no timeout +#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 + +// the default effect (RGB test) +#define RGB_BACKLIGHT_EFFECT 255 + +// These define which keys in the matrix are alphas/mods +// Used for backlight effects so colors are different for +// alphas vs. mods +// Each value is for a row, bit 0 is column 0 +// Alpha=0 Mod=1 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0110000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0110000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0111000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111100000000111 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 + +// EEPROM usage + +// TODO: refactor with new user EEPROM code (coming soon) +#define EEPROM_MAGIC 0x451F +#define EEPROM_MAGIC_ADDR 32 +// Bump this every time we change what we store +// This will automatically reset the EEPROM with defaults +// and avoid loading invalid data from the EEPROM +#define EEPROM_VERSION 0x08 +#define EEPROM_VERSION_ADDR 34 + +// Backlight config starts after EEPROM version +#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35 +// Dynamic keymap starts after backlight config (35+31) +#define DYNAMIC_KEYMAP_EEPROM_ADDR 66 +// Dynamic macro starts after dynamic keymaps (66+(4*5*15*2)) = (66+600) +#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 666 +#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 358 +#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/rama/koyu/info.json b/keyboards/rama/koyu/info.json new file mode 100644 index 0000000000..4b6edc7bfa --- /dev/null +++ b/keyboards/rama/koyu/info.json @@ -0,0 +1,13 @@ +{ + "keyboard_name": "KOYU", + "url": "", + "maintainer": "Wilba", + "bootloader": "DFU", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Num Lock", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Insert", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"/", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Ctrl", "x":11, "y":4, "w":1.5}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] + } + } +} \ No newline at end of file diff --git a/keyboards/rama/koyu/keymaps/default/keymap.c b/keyboards/rama/koyu/keymaps/default/keymap.c new file mode 100644 index 0000000000..f6bc94fbd6 --- /dev/null +++ b/keyboards/rama/koyu/keymaps/default/keymap.c @@ -0,0 +1,36 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // Default layer + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + MO(1), KC_LGUI, KC_LALT, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_RGHT), + + // Fn1 Layer + [1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_TRNS, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + // Fn2 Layer + [2] = LAYOUT_all( + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + // Fn3 Layer + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; diff --git a/keyboards/rama/koyu/koyu.c b/keyboards/rama/koyu/koyu.c new file mode 100644 index 0000000000..03d1e12159 --- /dev/null +++ b/keyboards/rama/koyu/koyu.c @@ -0,0 +1,18 @@ +/* Copyright 2018 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef RGB_BACKLIGHT_KOYU +#error RGB_BACKLIGHT_KOYU not defined, you done goofed somehao, brah +#endif diff --git a/keyboards/rama/koyu/koyu.h b/keyboards/rama/koyu/koyu.h new file mode 100644 index 0000000000..c2aaa0273a --- /dev/null +++ b/keyboards/rama/koyu/koyu.h @@ -0,0 +1,42 @@ +/* Copyright 2018 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" +#include "../../zeal60/rgb_backlight_keycodes.h" +#include "../../zeal60/zeal60_keycodes.h" + +#define ____ KC_NO + +// Right switch of split backspace is at 2,13 and is the only switch +// whose physical position doesn't match switch matrix position :-( +// However, it also makes no sense to view the physical as 16 columns, +// so the numbering goes 00 to 14. Deal with it. + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ + K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ + K400, K401, K402, K407, K411, K412, K413, K414 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ + { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, ____, K411, K412, K413, K414 } \ +} diff --git a/keyboards/rama/koyu/readme.md b/keyboards/rama/koyu/readme.md new file mode 100644 index 0000000000..0372747f58 --- /dev/null +++ b/keyboards/rama/koyu/readme.md @@ -0,0 +1,23 @@ +# RAMA KOYU + +![RAMA KOYU](https://static1.squarespace.com/static/563c788ae4b099120ae219e2/t/5b8bd6e6b8a045c95eac2003/1535891375794/RW-KOYU-A-RENDER-04-TOP.1335.jpg?format=1500w) + +The wait for something isnt the most conscious desire, but that anticipation creates nostalgia. + +At Rama Works, youve embraced this. From updates of the blog, to direct communication with the community, being part of a Rama Works product doesnt just start when you receive it. If youve ever received a Rama Works product, you know that no detail is overlooked. + +Let us take you on a journey that will capture that sensory experience, and explore the gravitational interaction between aesthetic and design. The Rama Works X element personifies the understanding that taking something away doesnt necessarily make it less. + +This is the sound of Rama Works. Never too busya feeling of delightful modern weightlessness. A rich sonic experience. Sparse and ethereal, this music boldly inhabits a nondescript, borderless space. Warm, synthetic textures, bespoke musical sound design. percussive elements percolating and accentuating movement on the screen and in the stereo field. a sonic palette full of clicks, taps and resonances evoking a sense of calm comfort and familiarity. + +[More info at RAMA WORKS](https://rama.works/koyu/) + +Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) +Hardware Supported: RAMA KOYU PCB +Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/) + +Make example for this keyboard (after setting up your build environment): + + make rama/koyu:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/rama/koyu/rules.mk b/keyboards/rama/koyu/rules.mk new file mode 100644 index 0000000000..5e470769d6 --- /dev/null +++ b/keyboards/rama/koyu/rules.mk @@ -0,0 +1,80 @@ + + +# project specific files +SRC = keyboards/zeal60/zeal60.c \ + keyboards/zeal60/rgb_backlight.c \ + quantum/color.c \ + drivers/issi/is31fl3731.c \ + drivers/avr/i2c_master.c + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Boot Section +BOOTLOADER = atmel-dfu + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DNO_SUSPEND_POWER_DOWN + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +RAW_ENABLE = yes +DYNAMIC_KEYMAP_ENABLE = yes +CIE1931_CURVE = yes + +#LAYOUTS = ??? diff --git a/keyboards/rama/m60_a/config.h b/keyboards/rama/m60_a/config.h index 2b54cda790..1cbdee5ae3 100644 --- a/keyboards/rama/m60_a/config.h +++ b/keyboards/rama/m60_a/config.h @@ -87,9 +87,19 @@ // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for // alphas vs. mods @@ -101,6 +111,11 @@ #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + #define DYNAMIC_KEYMAP_LAYER_COUNT 4 // EEPROM usage diff --git a/keyboards/rama/m6_b/config.h b/keyboards/rama/m6_b/config.h index c2a225d53a..0d690bffaf 100644 --- a/keyboards/rama/m6_b/config.h +++ b/keyboards/rama/m6_b/config.h @@ -120,9 +120,19 @@ // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for // alphas vs. mods @@ -134,6 +144,11 @@ #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + #define DYNAMIC_KEYMAP_LAYER_COUNT 4 // EEPROM usage diff --git a/keyboards/readme.md b/keyboards/readme.md index 8b0c10ab48..81284755f4 100644 --- a/keyboards/readme.md +++ b/keyboards/readme.md @@ -35,7 +35,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not * [9key](/keyboards/9key) — A 9-key minipad sold by Bishop Keyboards. * [Alps64](/keyboards/alps64) — A 60% keyboard for Alps keyswitches. * [AMJ60](/keyboards/amj60) — DIY/Assembled compact 60% keyboard. -* [Arrow Pad](/keyboards/arrow_pad) — A custom creation by IBNobody. +* [Arrow Pad](/keyboards/handwired/arrow_pad) — A custom creation by IBNobody. * [Atreus](/keyboards/atreus) — Made by Technomancy. * [Bantam44](/keyboards/bantam44) — It is a 44-key 40% staggered keyboard. * [DataHand](/keyboards/handwired/datahand) — DataHand keyboard converted to use a Teensy board. @@ -53,7 +53,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not * [The Kitten Paw](/keyboards/kitten_paw) — A replacement controller (2016 revision) for the Filco Majestouch by [Bathroom Epiphanies](https://github.com/BathroomEpiphanies). * [Lets Split](/keyboards/lets_split) - Split ortholinear 40% keyboard. * [Phantom](/keyboards/phantom) — A tenkeyless kit by Teel, also from Geekhack. -* [Retro Refit](/keyboards/retro_refit) — Another creation by IBNobody. +* [Retro Refit](/keyboards/handwired/retro_refit) — Another creation by IBNobody. * [S60-x](/keyboards/s60_x) — DIY compact keyboard designed by VinnyCordeiro for Sentraq. * [Satan](/keyboards/satan) — A GH60 variant. * [SixKeyBoard](/keyboards/sixkeyboard) — A 6-key keyboard made by TechKeys. diff --git a/keyboards/romac/config.h b/keyboards/romac/config.h new file mode 100644 index 0000000000..b92785fd52 --- /dev/null +++ b/keyboards/romac/config.h @@ -0,0 +1,40 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER TheRoyalSweatshirt +#define PRODUCT romac +#define DESCRIPTION A *Plaid inspired twelve-key macropad +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 3 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D4, C6, D7, E6 } +#define MATRIX_COL_PINS { F7, B1, B3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#define BACKLIGHT_LEVELS 0 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGBLED_NUM 0 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/romac/info.json b/keyboards/romac/info.json new file mode 100644 index 0000000000..305785991e --- /dev/null +++ b/keyboards/romac/info.json @@ -0,0 +1,13 @@ +{ + "keyboard_name": "RoMac", + "url": "", + "maintainer": "TheRoyalSweatshirt", + "width": 3, + "height": 4, + "layouts": { + "LAYOUT": { + "key_count": 12, + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}] + } + } +} diff --git a/keyboards/romac/keymaps/default/keymap.c b/keyboards/romac/keymaps/default/keymap.c new file mode 100644 index 0000000000..35636f36b3 --- /dev/null +++ b/keyboards/romac/keymaps/default/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +#define _BASE 0 +#define _FN1 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BASE] = LAYOUT( + KC_7, KC_8, KC_9, \ + KC_4, KC_5, KC_6, \ + KC_1, KC_2, KC_3, \ + MO(_FN1), KC_0, KC_ENT \ + ), + + [_FN1] = LAYOUT( + KC_TRNS, KC_HOME, KC_PGUP, \ + KC_TRNS, KC_END, KC_PGDN, \ + KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_DOT \ + ) +}; diff --git a/keyboards/romac/readme.md b/keyboards/romac/readme.md new file mode 100644 index 0000000000..98ed21502a --- /dev/null +++ b/keyboards/romac/readme.md @@ -0,0 +1,16 @@ + +# RoMac + +![RoMac](https://i.imgur.com/hAOyoqj.jpg) + +A “Plaid” Inspired 12-Key (3x4) Macropad. + +- Keyboard Maintainer: [Garret G.](https://github.com/TheRoyalSweatshirt) +- Hardware Supported: RoMac rev.1, rev.2, Pro Micro, Elite-C, Proton C, BlueMicro. +- Hardware Availability: Through GB or Direct Message (If extra stock is available). + +Make example for this keyboard (after setting up your build environment): + + make romac:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/romac/romac.c b/keyboards/romac/romac.c new file mode 100644 index 0000000000..24f4c16333 --- /dev/null +++ b/keyboards/romac/romac.c @@ -0,0 +1 @@ +#include "romac.h" diff --git a/keyboards/romac/romac.h b/keyboards/romac/romac.h new file mode 100644 index 0000000000..e6fb9694d2 --- /dev/null +++ b/keyboards/romac/romac.h @@ -0,0 +1,16 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, \ + K10, K11, K12, \ + K20, K21, K22, \ + K30, K31, K32 \ +) \ +{ \ + { K00, K01, K02 }, \ + { K10, K11, K12 }, \ + { K20, K21, K22 }, \ + { K30, K31, K32 } \ +} diff --git a/keyboards/romac/rules.mk b/keyboards/romac/rules.mk new file mode 100644 index 0000000000..b500f1b885 --- /dev/null +++ b/keyboards/romac/rules.mk @@ -0,0 +1,57 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no + diff --git a/keyboards/treadstone48/common/glcdfont.c b/keyboards/treadstone48/common/glcdfont.c new file mode 100644 index 0000000000..32c688e2bb --- /dev/null +++ b/keyboards/treadstone48/common/glcdfont.c @@ -0,0 +1,244 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include + #include +#elif defined(ESP8266) + #include +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x10, 0x10, 0x10, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; +#endif // FONT5X7_H diff --git a/keyboards/treadstone48/common/oled_helper.c b/keyboards/treadstone48/common/oled_helper.c new file mode 100644 index 0000000000..500d3c0dc1 --- /dev/null +++ b/keyboards/treadstone48/common/oled_helper.c @@ -0,0 +1,83 @@ +#ifdef SSD1306OLED +#include QMK_KEYBOARD_H +#include "ssd1306.h" + +void render_logo(struct CharacterMatrix *matrix) { + + const char logo_buf[]={ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, + 0}; + + matrix_write(matrix, logo_buf); +} + +static char keylog_buf[24] = "Key state ready."; +const char code_to_name[60] = { + ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', + 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', + 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', + '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', + 'R', 'E', 'B', 'T', ' ', '-', ' ', '@', ' ', ' ', + ' ', ';', ':', ' ', ',', '.', '/', ' ', ' ', ' '}; + +void update_key_status(uint16_t keycode, keyrecord_t *record) { + + if (!record->event.pressed) return; + + char name = (keycode < 60) ? code_to_name[keycode] : ' '; + snprintf(keylog_buf, sizeof(keylog_buf) - 1, "Key:%dx%d %2x %c", + record->event.key.row, record->event.key.col, + (uint16_t)keycode, name); +} + +void render_key_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, keylog_buf); +} + +static char lock_buf[24] = "Lock state ready.\n"; +void update_lock_status(void) { + + uint8_t leds = host_keyboard_leds(); + char *num_lock = (leds & (1< +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +// GCC include 'config.h" sequence in qmk_firmware/keyboards/treadstone48/ +// -include keyboards/treadstone48/config.h +// -include keyboards/treadstone48/rev?/config.h +// -include keyboards/treadstone48/rev?/keymaps/MAPNAME/config.h +// XXXX.c + +#include + +// GCC include search path in qmk_firmare/keyboards/treadstone48/ +// #include "..." search starts here: +// #include <...> search starts here: +// keyboards/treadstone48/rev?/keymaps/MAPNAME +// keyboards/treadstone48 +// keyboards/treadstone48/rev? +// . +// ./tmk_core +// ...... + +// MACRO and FUNCTION are features that are depreciated. +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/treadstone48/i2c.c b/keyboards/treadstone48/i2c.c new file mode 100644 index 0000000000..4bee5c6398 --- /dev/null +++ b/keyboards/treadstone48/i2c.c @@ -0,0 +1,162 @@ +#include +#include +#include +#include +#include +#include +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1< slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1< + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency 400kHz +#define SCL_CLOCK 400000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/treadstone48/keymaps/default/config.h b/keyboards/treadstone48/keymaps/default/config.h new file mode 100644 index 0000000000..3f63a0cfbb --- /dev/null +++ b/keyboards/treadstone48/keymaps/default/config.h @@ -0,0 +1,60 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +// place overrides here + +#ifdef TAPPING_TERM +#undef TAPPING_TERM +#endif +#define TAPPING_TERM 225 +// #define PREVENT_STUCK_MODIFIERS +// #define IGNORE_MOD_TAP_INTERRUPT + +#ifdef MOUSEKEY_ENABLE + #undef MOUSEKEY_INTERVAL + #define MOUSEKEY_INTERVAL 1 + + #undef MOUSEKEY_TIME_TO_MAX + #define MOUSEKEY_TIME_TO_MAX 150 + + #undef MOUSEKEY_MAX_SPEED + #define MOUSEKEY_MAX_SPEED 3 + + #undef MOUSEKEY_MOVE_DELTA + #define MOUSEKEY_MOVE_DELTA 4 + + #undef MOUSEKEY_DELAY + #define MOUSEKEY_DELAY 0 +#endif + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + //#define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + //#define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/treadstone48/keymaps/default/keymap.c b/keyboards/treadstone48/keymaps/default/keymap.c new file mode 100644 index 0000000000..406f112921 --- /dev/null +++ b/keyboards/treadstone48/keymaps/default/keymap.c @@ -0,0 +1,278 @@ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" +#include "../common/oled_helper.h" + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _BASE = 0, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + LOWER = SAFE_RANGE, + RAISE, + ADJUST, + KANJI, + RGBRST +}; + +enum tapdances{ + TD_SCCL = 0, + TD_SLRO, +}; + +// Layer Mode aliases +#define _____ KC_TRNS +#define XXXXX KC_NO + +#define KC_TBSF LSFT_T(KC_TAB) +// #define KC_SPSF LSFT_T(KC_SPC) +#define KC_ALAP LALT_T(KC_APP) +#define KC_JEQL LSFT(KC_MINS) + +#define KC_SCCL TD(TD_SCCL) +#define KC_SLRO TD(TD_SLRO) + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_SCCL] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_QUOT), + [TD_SLRO] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_RO), +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + KC_TBSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCCL, KC_ENT,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLRO, KC_UP, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_ALAP, KC_LEFT, KC_DOWN, KC_RGHT,\ + //`-------------------------------------------------------------------------------------------------------------------' + KC_DEL \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_LOWER] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + _____, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + _____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXX, XXXXX, XXXXX, KC_SCLN, KC_QUOT, _____,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, KC_F11, KC_F12, XXXXX, KANJI, KC_ENT, XXXXX, XXXXX, KC_COMM, KC_DOT, KC_GRV, KC_PGUP, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, KC_DEL, _____, _____, XXXXX, KC_HOME, KC_PGDN, KC_END,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_RAISE] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + _____, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_4, KC_5, KC_6, KC_QUOT, _____,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_1, KC_2, KC_3, KC_RO, XXXXX, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, _____, _____, _____, KC_0, KC_DOT, KC_COMM, KC_SLSH,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_ADJUST] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + XXXXX, RESET, RGBRST, AG_NORM, AG_SWAP, XXXXX, XXXXX, KC_WH_L, KC_WH_U, KC_HOME, KC_PGUP, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + XXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXX, XXXXX, KC_WH_R, KC_WH_D, KC_END, KC_PGDN, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXX, XXXXX, XXXXX, KC_BTN1, KC_BTN2, XXXXX, KC_MS_U, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, XXXXX, XXXXX, _____, XXXXX, KC_MS_L, KC_MS_D, KC_MS_R,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ) +}; + +#define L_BASE _BASE +#define L_LOWER (1<<_LOWER) +#define L_RAISE (1<<_RAISE) +#define L_ADJUST (1<<_ADJUST) +#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) + +#ifdef SSD1306OLED +typedef struct { + uint8_t state; + char name[8]; +}LAYER_DISPLAY_NAME; + +#define LAYER_DISPLAY_MAX 5 +const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = { + {L_BASE, "Base"}, + {L_BASE + 1, "Base"}, + {L_LOWER, "Lower"}, + {L_RAISE, "Raise"}, + {L_ADJUST_TRI, "Adjust"} +}; + +static inline const char* get_leyer_status(void) { + + for (uint8_t i = 0; i < LAYER_DISPLAY_MAX; ++i) { + if (layer_state == 0 && layer_display_name[i].state == default_layer_state) { + + return layer_display_name[i].name; + } else if (layer_state != 0 && layer_display_name[i].state == layer_state) { + + return layer_display_name[i].name; + } + } + + return "?"; +} + +static char layer_status_buf[24] = "Layer state ready.\n"; +static inline void update_keymap_status(void) { + + snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "OS:%s Layer:%s\n", + keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status()); +} + +static inline void render_keymap_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, layer_status_buf); +} + +#define UPDATE_KEYMAP_STATUS() update_keymap_status() +#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a) + +#else + +#define UPDATE_KEYMAP_STATUS() +#define RENDER_KEYMAP_STATUS(a) + +#endif + +static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) { + + pressed ? layer_on(layer1) : layer_off(layer1); + IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3); +} + +int RGB_current_mode; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + UPDATE_KEY_STATUS(keycode, record); + + bool result = false; + switch (keycode) { + case LOWER: + update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST); + break; + case RAISE: + update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST); + break; + case KANJI: + if (record->event.pressed) { + if (keymap_config.swap_lalt_lgui == false) { + register_code(KC_LANG2); + } else { + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + break; + #ifdef RGBLIGHT_ENABLE + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + break; + case RGBRST: + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + break; + #endif + default: + result = true; + break; + } + + UPDATE_KEYMAP_STATUS(); + return result; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +void matrix_scan_user(void) { + iota_gfx_task(); // this is what updates the display continuously +} + +static inline void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +static inline void render_status(struct CharacterMatrix *matrix) { + + UPDATE_LED_STATUS(); + RENDER_LED_STATUS(matrix); + RENDER_KEYMAP_STATUS(matrix); + UPDATE_LOCK_STATUS(); + RENDER_LOCK_STATUS(matrix); + RENDER_KEY_STATUS(matrix); +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + + #if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } + #endif + + matrix_clear(&matrix); + if (is_master) { + render_status(&matrix); + } + + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/treadstone48/keymaps/default/readme.md b/keyboards/treadstone48/keymaps/default/readme.md new file mode 100644 index 0000000000..bb835d169c --- /dev/null +++ b/keyboards/treadstone48/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# Default keymap for treadstone48 + +## Description + +## How to use diff --git a/keyboards/treadstone48/keymaps/default/readme_jp.md b/keyboards/treadstone48/keymaps/default/readme_jp.md new file mode 100644 index 0000000000..6043c93cbc --- /dev/null +++ b/keyboards/treadstone48/keymaps/default/readme_jp.md @@ -0,0 +1,80 @@ +# US配列ライクデフォルトキーマップ + +## 概要 + +　US配列ライクなデフォルトキーマップです。 + +## キーマップの見かた + +qmk_firmware\tmk_core\common\keycode.h +に基本的なキーコードがあります。また、Keymap.cの上部にカスタムしたKC_で始まるものを登録しています。 +キーマップに書くときは「KC_」を省略して書いています。 +例：KC_A → A + +Leyer Tap、Mod Tap、Tap DanceというQMKの機能を使っています。 + +Layer Tapはタップで指定したキー、長押しで指定したレイヤーに移動します。 +例：LT(RAISE, KC_V) → タップでV、長押しでRAISEレイヤー移動 + +Mod Tapはタップで視程したキー、長押しで視程したレイヤーに移動します。 +例：LSFT_T(KC_Z) → タップでZ、長押しで左シフト + +Tap Danceは指定した二つのキーをシングルタップ、ダブルタップで切り替えられます。 +例：[TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT) → シングルタップでCOMM、ダブルタップでDOT + +もう少し詳しい内容についてはQMK Documentをお読みいただくかネットを検索すれば情報が載っていますので別途検索してみてください。 + +## 機能 + +　QWERTYキーマップをベースにしていて、LowerレイヤーとRaiseレイヤーに他のキーを配置しています。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 +　DOTの横、SLROと書いてあるのはシングルタップで/記号、ダブルタップで\記号が入力出来るようになっています。 +　Lの横、SCCLと書いてあるのはシングルタップで;記号、ダブルタップで:記号が入力出来るようになっています。 +　マウスキーの割り当てがありますので、もし使用したい場合はrules.mkでMOUSEKEY_ENABLE = yesにしてmakeすると使用することができます。 + +## 48キー目について + +　このキーボードはEnterキーの上の2Uキーを1Ux2個にして使用する事が出来るようになっています。 使用する場合はキーマップの書き換えが必要です。 + +　各レイヤーの最下段の + +```c + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. +``` + +　のXXXXXに任意のキーを入れることでPの右隣のキーとして動作するようになっています。その右隣りに従来のキーが配置されています。 + +## OS切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- KNRM: QMKのノーマル状態です。macだと正常に使える（はず）です +- KSWP: ノーマル状態のままWindowsで使用するとALTキーとGUI（win）キーが逆ですので、それを入れ換えます。Windowsユーザーはこちらのモードにしてください + +## NUMPADモードについて + +　Lower + DLNPキーを一度押下するとNumpadモードになります。通常モードに戻す場合はDLBSキーを押下してください。 + +## IME切り替え方法 + +　Winの場合、LowerレイヤーにKANJIキー（半角/全角　漢字）がありますので、Lower+KANJIで切り替えてください。 + +## ソフトウェアリセットについて + +　キーボードにはハードウェアのリセットボタンが付いていますが、ソフトウェアリセットをかけられます。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来、AdjustレイヤーのRESETを押下するとリセットがかかります。 + +## LEDの点灯切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- RGBRST: LEDのリセット +- RGB_TOG: LEDのON/OFF切り替え +- RGB_MOD: LEDの光り方の変更 +- RGB_HUI: Hue+ 色合いを変更 +- RGB_HUD: Hue- 色合いを変更 +- RGB_SAI: Saturation+ 色の濃さを変更 +- RGB_SAD: Saturation- 色の濃さを変更 +- RGB_VAI: Value+ 明るさを変更 +- RGB_VAD: Value- 明るさを変更 diff --git a/keyboards/treadstone48/keymaps/default/rules.mk b/keyboards/treadstone48/keymaps/default/rules.mk new file mode 100644 index 0000000000..c53226431d --- /dev/null +++ b/keyboards/treadstone48/keymaps/default/rules.mk @@ -0,0 +1,67 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SWAP_HANDS_ENABLE = no # Enable one-hand typing +TAP_DANCE_ENABLE = yes + +# If your custom treadstone48 pcb, you can rewrite to yes. +OLED_ENABLE = no # OLED_ENABLE +LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = yes # LED animations + +# Other selectable option +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +LOCAL_GLCDFONT = no # use each keymaps "font.h" insted of "common/glcdfont.c" +# RHYMESTONE_RIGHTHAND = no # If connect right hand side of the Rhymestone, set to yes. +ANGELINA_KEYMAP = no # If Alfa verstion use set to yes. + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + RGBLIGHT_ENABLE = yes +else + RGBLIGHT_ENABLE = no +endif + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + # OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +ifeq ($(strip $(LOCAL_GLCDFONT)), yes) + OPT_DEFS += -DLOCAL_GLCDFONT +endif + +# ifeq ($(strip $(RHYMESTONE_RIGHTHAND)), yes) +# OPT_DEFS += -DRHYMESTONE_RIGHTHAND +# endif + +ifeq ($(strip $(ANGELINA_KEYMAP)), yes) + OPT_DEFS += -DANGELINA_KEYMAP +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./common/oled_helper.c \ diff --git a/keyboards/treadstone48/keymaps/like_jis/config.h b/keyboards/treadstone48/keymaps/like_jis/config.h new file mode 100644 index 0000000000..3f63a0cfbb --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis/config.h @@ -0,0 +1,60 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +// place overrides here + +#ifdef TAPPING_TERM +#undef TAPPING_TERM +#endif +#define TAPPING_TERM 225 +// #define PREVENT_STUCK_MODIFIERS +// #define IGNORE_MOD_TAP_INTERRUPT + +#ifdef MOUSEKEY_ENABLE + #undef MOUSEKEY_INTERVAL + #define MOUSEKEY_INTERVAL 1 + + #undef MOUSEKEY_TIME_TO_MAX + #define MOUSEKEY_TIME_TO_MAX 150 + + #undef MOUSEKEY_MAX_SPEED + #define MOUSEKEY_MAX_SPEED 3 + + #undef MOUSEKEY_MOVE_DELTA + #define MOUSEKEY_MOVE_DELTA 4 + + #undef MOUSEKEY_DELAY + #define MOUSEKEY_DELAY 0 +#endif + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + //#define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + //#define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/treadstone48/keymaps/like_jis/keymap.c b/keyboards/treadstone48/keymaps/like_jis/keymap.c new file mode 100644 index 0000000000..b63b0c9f49 --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis/keymap.c @@ -0,0 +1,278 @@ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" +#include "../common/oled_helper.h" + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _BASE = 0, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + LOWER = SAFE_RANGE, + RAISE, + ADJUST, + KANJI, + RGBRST +}; + +enum tapdances{ + TD_SCCL = 0, + TD_SLRO, +}; + +// Layer Mode aliases +#define _____ KC_TRNS +#define XXXXX KC_NO + +#define KC_TBSF LSFT_T(KC_TAB) +// #define KC_SPSF LSFT_T(KC_SPC) +#define KC_ALAP LALT_T(KC_APP) +#define KC_JEQL LSFT(KC_MINS) + +#define KC_SCCL TD(TD_SCCL) +#define KC_SLRO TD(TD_SLRO) + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_SCCL] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_QUOT), + [TD_SLRO] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_RO), +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + KC_TBSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCCL, KC_ENT,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLRO, KC_UP, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_ALAP, KC_LEFT, KC_DOWN, KC_RGHT,\ + //`-------------------------------------------------------------------------------------------------------------------' + KC_DEL \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_LOWER] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + _____, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_JYEN, KC_LBRC, KC_RBRC, KC_DEL,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + _____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXX, XXXXX, KC_SCLN, KC_QUOT, KC_BSLS, _____,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, KC_F11, KC_F12, XXXXX, KANJI, KC_ENT, XXXXX, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_PGUP, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, KC_DEL, _____, _____, XXXXX, KC_HOME, KC_PGDN, KC_END,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_RAISE] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + _____, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_4, KC_5, KC_6, KC_QUOT, _____,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_1, KC_2, KC_3, KC_RO, XXXXX, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, _____, _____, _____, KC_0, KC_DOT, KC_COMM, KC_SLSH,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_ADJUST] = LAYOUT_base( \ + //,--------------------------------------------------------------------------------------------------------------------. + XXXXX, RESET, RGBRST, AG_NORM, AG_SWAP, XXXXX, XXXXX, KC_WH_L, KC_WH_U, KC_HOME, KC_PGUP, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| + XXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXX, XXXXX, KC_WH_R, KC_WH_D, KC_END, KC_PGDN, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXX, XXXXX, XXXXX, KC_BTN1, KC_BTN2, XXXXX, KC_MS_U, \ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| + _____, _____, _____, _____, XXXXX, XXXXX, _____, XXXXX, KC_MS_L, KC_MS_D, KC_MS_R,\ + //`-------------------------------------------------------------------------------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ) +}; + +#define L_BASE _BASE +#define L_LOWER (1<<_LOWER) +#define L_RAISE (1<<_RAISE) +#define L_ADJUST (1<<_ADJUST) +#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) + +#ifdef SSD1306OLED +typedef struct { + uint8_t state; + char name[8]; +}LAYER_DISPLAY_NAME; + +#define LAYER_DISPLAY_MAX 5 +const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = { + {L_BASE, "Base"}, + {L_BASE + 1, "Base"}, + {L_LOWER, "Lower"}, + {L_RAISE, "Raise"}, + {L_ADJUST_TRI, "Adjust"} +}; + +static inline const char* get_leyer_status(void) { + + for (uint8_t i = 0; i < LAYER_DISPLAY_MAX; ++i) { + if (layer_state == 0 && layer_display_name[i].state == default_layer_state) { + + return layer_display_name[i].name; + } else if (layer_state != 0 && layer_display_name[i].state == layer_state) { + + return layer_display_name[i].name; + } + } + + return "?"; +} + +static char layer_status_buf[24] = "Layer state ready.\n"; +static inline void update_keymap_status(void) { + + snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "OS:%s Layer:%s\n", + keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status()); +} + +static inline void render_keymap_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, layer_status_buf); +} + +#define UPDATE_KEYMAP_STATUS() update_keymap_status() +#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a) + +#else + +#define UPDATE_KEYMAP_STATUS() +#define RENDER_KEYMAP_STATUS(a) + +#endif + +static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) { + + pressed ? layer_on(layer1) : layer_off(layer1); + IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3); +} + +int RGB_current_mode; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + UPDATE_KEY_STATUS(keycode, record); + + bool result = false; + switch (keycode) { + case LOWER: + update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST); + break; + case RAISE: + update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST); + break; + case KANJI: + if (record->event.pressed) { + if (keymap_config.swap_lalt_lgui == false) { + register_code(KC_LANG2); + } else { + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + break; + #ifdef RGBLIGHT_ENABLE + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + break; + case RGBRST: + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + break; + #endif + default: + result = true; + break; + } + + UPDATE_KEYMAP_STATUS(); + return result; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +void matrix_scan_user(void) { + iota_gfx_task(); // this is what updates the display continuously +} + +static inline void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +static inline void render_status(struct CharacterMatrix *matrix) { + + UPDATE_LED_STATUS(); + RENDER_LED_STATUS(matrix); + RENDER_KEYMAP_STATUS(matrix); + UPDATE_LOCK_STATUS(); + RENDER_LOCK_STATUS(matrix); + RENDER_KEY_STATUS(matrix); +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + + #if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } + #endif + + matrix_clear(&matrix); + if (is_master) { + render_status(&matrix); + } + + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/treadstone48/keymaps/like_jis/readme.md b/keyboards/treadstone48/keymaps/like_jis/readme.md new file mode 100644 index 0000000000..796df6c4cd --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis/readme.md @@ -0,0 +1,5 @@ +# The like jis type keyboard keymap for treadstone48 + +## Description + +## How to use diff --git a/keyboards/treadstone48/keymaps/like_jis/readme_jp.md b/keyboards/treadstone48/keymaps/like_jis/readme_jp.md new file mode 100644 index 0000000000..305ded471d --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis/readme_jp.md @@ -0,0 +1,80 @@ +# JISキーボードライクなキーマップ + +## 概要 + +　デフォルトキーマップの記号類をJISライクな配置に揃えなおしたものです。 + +## キーマップの見かた + +qmk_firmware\tmk_core\common\keycode.h +に基本的なキーコードがあります。また、Keymap.cの上部にカスタムしたKC_で始まるものを登録しています。 +キーマップに書くときは「KC_」を省略して書いています。 +例：KC_A → A + +Leyer Tap、Mod Tap、Tap DanceというQMKの機能を使っています。 + +Layer Tapはタップで指定したキー、長押しで指定したレイヤーに移動します。 +例：LT(RAISE, KC_V) → タップでV、長押しでRAISEレイヤー移動 + +Mod Tapはタップで視程したキー、長押しで視程したレイヤーに移動します。 +例：LSFT_T(KC_Z) → タップでZ、長押しで左シフト + +Tap Danceは指定した二つのキーをシングルタップ、ダブルタップで切り替えられます。 +例：[TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT) → シングルタップでCOMM、ダブルタップでDOT + +もう少し詳しい内容についてはQMK Documentをお読みいただくかネットを検索すれば情報が載っていますので別途検索してみてください。 + +## 機能 + +　QWERTYキーマップをベースにしていて、LowerレイヤーとRaiseレイヤーに他のキーを配置しています。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 +　DOTの横、SLROと書いてあるのはシングルタップで/記号、ダブルタップで\記号が入力出来るようになっています。 +　Lの横、SCCLと書いてあるのはシングルタップで;記号、ダブルタップで:記号が入力出来るようになっています。 +　マウスキーの割り当てがありますので、もし使用したい場合はrules.mkでMOUSEKEY_ENABLE = yesにしてmakeすると使用することができます。 + +## 48キー目について + +　このキーボードはEnterキーの上の2Uキーを1Ux2個にして使用する事が出来るようになっています。 使用する場合はキーマップの書き換えが必要です。 + +　各レイヤーの最下段の + +```c + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. +``` + +　のXXXXXに任意のキーを入れることでPの右隣のキーとして動作するようになっています。その右隣りに従来のキーが配置されています。 + +## OS切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- KNRM: QMKのノーマル状態です。macだと正常に使える（はず）です +- KSWP: ノーマル状態のままWindowsで使用するとALTキーとGUI（win）キーが逆ですので、それを入れ換えます。Windowsユーザーはこちらのモードにしてください + +## NUMPADモードについて + +　Lower + DLNPキーを一度押下するとNumpadモードになります。通常モードに戻す場合はDLBSキーを押下してください。 + +## IME切り替え方法 + +　Winの場合、LowerレイヤーにKANJIキー（半角/全角　漢字）がありますので、Lower+KANJIで切り替えてください。 + +## ソフトウェアリセットについて + +　キーボードにはハードウェアのリセットボタンが付いていますが、ソフトウェアリセットをかけられます。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来、AdjustレイヤーのRSTを押下するとリセットがかかります。 + +## LEDの点灯切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- RGBRST: LEDのリセット +- RGB_TOG: LEDのON/OFF切り替え +- RGB_MOD: LEDの光り方の変更 +- RGB_HUI: Hue+ 色合いを変更 +- RGB_HUD: Hue- 色合いを変更 +- RGB_SAI: Saturation+ 色の濃さを変更 +- RGB_SAD: Saturation- 色の濃さを変更 +- RGB_VAI: Value+ 明るさを変更 +- RGB_VAD: Value- 明るさを変更 diff --git a/keyboards/treadstone48/keymaps/like_jis/rules.mk b/keyboards/treadstone48/keymaps/like_jis/rules.mk new file mode 100644 index 0000000000..c53226431d --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis/rules.mk @@ -0,0 +1,67 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SWAP_HANDS_ENABLE = no # Enable one-hand typing +TAP_DANCE_ENABLE = yes + +# If your custom treadstone48 pcb, you can rewrite to yes. +OLED_ENABLE = no # OLED_ENABLE +LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = yes # LED animations + +# Other selectable option +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +LOCAL_GLCDFONT = no # use each keymaps "font.h" insted of "common/glcdfont.c" +# RHYMESTONE_RIGHTHAND = no # If connect right hand side of the Rhymestone, set to yes. +ANGELINA_KEYMAP = no # If Alfa verstion use set to yes. + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + RGBLIGHT_ENABLE = yes +else + RGBLIGHT_ENABLE = no +endif + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + # OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +ifeq ($(strip $(LOCAL_GLCDFONT)), yes) + OPT_DEFS += -DLOCAL_GLCDFONT +endif + +# ifeq ($(strip $(RHYMESTONE_RIGHTHAND)), yes) +# OPT_DEFS += -DRHYMESTONE_RIGHTHAND +# endif + +ifeq ($(strip $(ANGELINA_KEYMAP)), yes) + OPT_DEFS += -DANGELINA_KEYMAP +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./common/oled_helper.c \ diff --git a/keyboards/treadstone48/keymaps/like_jis_rs/config.h b/keyboards/treadstone48/keymaps/like_jis_rs/config.h new file mode 100644 index 0000000000..e8acd5c76d --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis_rs/config.h @@ -0,0 +1,60 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +// place overrides here + +#ifdef TAPPING_TERM +#undef TAPPING_TERM +#endif +#define TAPPING_TERM 225 +#define PREVENT_STUCK_MODIFIERS +#define IGNORE_MOD_TAP_INTERRUPT + +#ifdef MOUSEKEY_ENABLE + #undef MOUSEKEY_INTERVAL + #define MOUSEKEY_INTERVAL 1 + + #undef MOUSEKEY_TIME_TO_MAX + #define MOUSEKEY_TIME_TO_MAX 150 + + #undef MOUSEKEY_MAX_SPEED + #define MOUSEKEY_MAX_SPEED 3 + + #undef MOUSEKEY_MOVE_DELTA + #define MOUSEKEY_MOVE_DELTA 4 + + #undef MOUSEKEY_DELAY + #define MOUSEKEY_DELAY 0 +#endif + +// Selection of RGBLIGHT MODE to use. +#if defined(LED_ANIMATIONS) + //#define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + //#define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + //#define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + //#define RGBLIGHT_EFFECT_RGB_TEST + //#define RGBLIGHT_EFFECT_ALTERNATING +#endif diff --git a/keyboards/treadstone48/keymaps/like_jis_rs/keymap.c b/keyboards/treadstone48/keymaps/like_jis_rs/keymap.c new file mode 100644 index 0000000000..0e4ec063cc --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis_rs/keymap.c @@ -0,0 +1,342 @@ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" +#include "../common/oled_helper.h" + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_number { + _BASE = 0, + _BASES, + _LOWER, + _LOWRS, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + BASE = SAFE_RANGE, + BASES, + LOWER, + LOWRS, + RAISE, + ADJUST, + KANJI, + RGBRST +}; + +enum tapdances{ + TD_SCCL = 0, + TD_SLRO, +}; + +// Layer Mode aliases +#define _____ KC_TRNS +#define XXXXX KC_NO + +#define KC_TBSF LSFT_T(KC_TAB) +// #define KC_SPSF LSFT_T(KC_SPC) +#define KC_ALAP LALT_T(KC_APP) +#define KC_JEQL LSFT(KC_MINS) +#define KC_SFUC LSFT(KC_RO) +#define KC_RSBR LSFT(KC_8) +#define KC_REBR LSFT(KC_9) + +#define KC_ZSFT LSFT_T(KC_Z) +#define KC_ESCT LCTL_T(KC_ESC) +#define KC_TBAL LALT_T(KC_TAB) +#define KC_11SF LSFT_T(KC_F11) + +#define KC_SCCL TD(TD_SCCL) +#define KC_SLRO TD(TD_SLRO) + +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_SCCL] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_QUOT), + [TD_SLRO] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_RO), +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_P7, KC_P8, KC_P9, KC_PSLS, KC_NLCK,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + KC_TBSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCCL, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PAST, KC_TAB,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLRO, KC_UP, KC_P1, KC_P2, KC_P3, KC_PMNS, KC_PENT,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_ALAP, KC_LEFT, KC_DOWN, KC_RGHT, LOWER, KC_P0, KC_PDOT, KC_PPLS, KC_BSPC,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + KC_DEL \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_LOWER] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + _____, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_JYEN, KC_LBRC, KC_RBRC, KC_DEL, KC_A, KC_B, KC_C, KC_JYEN, KC_HASH,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + _____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXX, XXXXX, KC_SCLN, KC_QUOT, KC_BSLS, _____, KC_D, KC_E, KC_F, KC_PERC, KC_SFUC,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, KC_F11, KC_F12, BASES, KANJI, KC_ENT, XXXXX, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_PGUP, KC_RSBR, KC_REBR, KC_RBRC, KC_QUOT, _____,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, _____, _____, _____, KC_DEL, _____, _____, XXXXX, KC_HOME, KC_PGDN, KC_END, _____, XXXXX, KC_COMM, KC_JEQL, KC_DEL,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_BASES] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, KC_Q, KC_W, KC_E, KC_R, KC_T,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + KC_TBSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCCL, KC_ENT, KC_A, KC_S, KC_D, KC_F, KC_G,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLRO, KC_UP, KC_ZSFT, KC_X, KC_C, KC_V, KC_B,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_ALAP, KC_LEFT, KC_DOWN, KC_RGHT, KC_ESCT, KC_TBAL, KC_LGUI, LOWRS, KC_BSPC,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + KC_DEL \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_LOWRS] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + _____, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_JYEN, KC_LBRC, KC_RBRC, KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + _____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXX, XXXXX, KC_SCLN, KC_QUOT, KC_BSLS, _____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, KC_F11, KC_F12, BASE, KANJI, KC_ENT, XXXXX, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_PGUP, KC_11SF, KC_F12, BASE, KANJI, KC_ENT,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, _____, _____, _____, KC_DEL, _____, _____, XXXXX, KC_HOME, KC_PGDN, KC_END, _____, _____, _____, _____, KC_DEL,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_RAISE] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + _____, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_4, KC_5, KC_6, KC_QUOT, _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_1, KC_2, KC_3, KC_RO, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, _____, _____, _____, _____, _____, _____, KC_0, KC_DOT, KC_COMM, KC_SLSH, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ), + + [_ADJUST] = LAYOUT_rs( \ + // Treadstone48 Rhymestone + //,--------------------------------------------------------------------------------------------------------------------. --------------------------------------------. + XXXXX, RESET, RGBRST, AG_NORM, AG_SWAP, XXXXX, XXXXX, KC_WH_L, KC_WH_U, KC_HOME, KC_PGUP, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------| --------+--------+--------+--------+--------| + XXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXX, XXXXX, KC_WH_R, KC_WH_D, KC_END, KC_PGDN, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXX, XXXXX, XXXXX, KC_BTN1, KC_BTN2, XXXXX, KC_MS_U, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------| --------+--------+--------+--------+--------| + _____, _____, _____, _____, XXXXX, XXXXX, _____, XXXXX, KC_MS_L, KC_MS_D, KC_MS_R, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\ + //`--------------------------------------------------------------------------------------------------------------------' --------------------------------------------' + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. + ) +}; + +#define L_BASE _BASE +#define L_BASES (1<<_BASES) +#define L_LOWER (1<<_LOWER) +#define L_LOWRS (1<<_LOWRS) +#define L_RAISE (1<<_RAISE) +#define L_ADJUST (1<<_ADJUST) +#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) + +#ifdef SSD1306OLED +typedef struct { + uint8_t state; + char name[8]; +}LAYER_DISPLAY_NAME; + +#define LAYER_DISPLAY_MAX 7 +const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = { + {L_BASE, "Base"}, + {L_BASE + 1, "Base"}, + {L_BASES, "BaseSpl"}, + {L_LOWER, "Lower"}, + {L_LOWRS, "LowrSpl"}, + {L_RAISE, "Raise"}, + {L_ADJUST_TRI, "Adjust"} +}; + +static inline const char* get_leyer_status(void) { + + for (uint8_t i = 0; i < LAYER_DISPLAY_MAX; ++i) { + if (layer_state == 0 && layer_display_name[i].state == default_layer_state) { + + return layer_display_name[i].name; + } else if (layer_state != 0 && layer_display_name[i].state == layer_state) { + + return layer_display_name[i].name; + } + } + + return "?"; +} + +static char layer_status_buf[24] = "Layer state ready.\n"; +static inline void update_keymap_status(void) { + + snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "OS:%s Layer:%s\n", + keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status()); +} + +static inline void render_keymap_status(struct CharacterMatrix *matrix) { + + matrix_write(matrix, layer_status_buf); +} + +#define UPDATE_KEYMAP_STATUS() update_keymap_status() +#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a) + +#else + +#define UPDATE_KEYMAP_STATUS() +#define RENDER_KEYMAP_STATUS(a) + +#endif + +void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) { + + pressed ? layer_on(layer1) : layer_off(layer1); + IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3); +} + +int RGB_current_mode; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + UPDATE_KEY_STATUS(keycode, record); + + bool result = false; + switch (keycode) { + case LOWER: + update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST); + break; + case RAISE: + update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST); + break; + case BASE: + if (record->event.pressed) { + default_layer_set(L_BASE); + } + break; + case BASES: + if (record->event.pressed) { + default_layer_set(L_BASES); + } + break; + case LOWRS: + update_change_layer(record->event.pressed, _LOWRS, _RAISE, _ADJUST); + break; + case KANJI: + if (record->event.pressed) { + if (keymap_config.swap_lalt_lgui == false) { + register_code(KC_LANG2); + } else { + SEND_STRING(SS_LALT("`")); + } + } else { + unregister_code(KC_LANG2); + } + break; + #ifdef RGBLIGHT_ENABLE + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + break; + case RGBRST: + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + break; + #endif + default: + result = true; + break; + } + + UPDATE_KEYMAP_STATUS(); + return result; +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + iota_gfx_init(!has_usb()); // turns on the display + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +void matrix_scan_user(void) { + iota_gfx_task(); // this is what updates the display continuously +} + +static inline void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +static inline void render_status(struct CharacterMatrix *matrix) { + + UPDATE_LED_STATUS(); + RENDER_LED_STATUS(matrix); + RENDER_KEYMAP_STATUS(matrix); + UPDATE_LOCK_STATUS(); + RENDER_LOCK_STATUS(matrix); + RENDER_KEY_STATUS(matrix); +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + + #if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } + #endif + + matrix_clear(&matrix); + if (is_master) { + render_status(&matrix); + } + + matrix_update(&display, &matrix); +} + +#endif diff --git a/keyboards/treadstone48/keymaps/like_jis_rs/readme.md b/keyboards/treadstone48/keymaps/like_jis_rs/readme.md new file mode 100644 index 0000000000..796df6c4cd --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis_rs/readme.md @@ -0,0 +1,5 @@ +# The like jis type keyboard keymap for treadstone48 + +## Description + +## How to use diff --git a/keyboards/treadstone48/keymaps/like_jis_rs/readme_jp.md b/keyboards/treadstone48/keymaps/like_jis_rs/readme_jp.md new file mode 100644 index 0000000000..5a6fc1d73b --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis_rs/readme_jp.md @@ -0,0 +1,84 @@ +# JISキーボードライクなキーマップ + +## 概要 + +　デフォルトキーマップの記号類をJISライクな配置に揃えなおしたものです。 +　オプションのRhymestone用のマップを使用するために拡張しています。RhymestoneのpromicroにもTreadstone48のキーマップを入れてください。 +　Rhymestoneは基本的には左手側を使うことを想定していますが、右手側を使用する場合はrules.mkにあるRHYMESTONE_RIGHTHAND設定をyesにすれば使えるようになります。 + +```RHYMESTONE_RIGHTHAND=yes``` + +## キーマップの見かた + +qmk_firmware\tmk_core\common\keycode.h +に基本的なキーコードがあります。また、Keymap.cの上部にカスタムしたKC_で始まるものを登録しています。 +キーマップに書くときは「KC_」を省略して書いています。 +例：KC_A → A + +Leyer Tap、Mod Tap、Tap DanceというQMKの機能を使っています。 + +Layer Tapはタップで指定したキー、長押しで指定したレイヤーに移動します。 +例：LT(RAISE, KC_V) → タップでV、長押しでRAISEレイヤー移動 + +Mod Tapはタップで視程したキー、長押しで視程したレイヤーに移動します。 +例：LSFT_T(KC_Z) → タップでZ、長押しで左シフト + +Tap Danceは指定した二つのキーをシングルタップ、ダブルタップで切り替えられます。 +例：[TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT) → シングルタップでCOMM、ダブルタップでDOT + +もう少し詳しい内容についてはQMK Documentをお読みいただくかネットを検索すれば情報が載っていますので別途検索してみてください。 + +## 機能 + +　QWERTYキーマップをベースにしていて、LowerレイヤーとRaiseレイヤーに他のキーを配置しています。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 +　DOTの横、SLROと書いてあるのはシングルタップで/記号、ダブルタップで\記号が入力出来るようになっています。 +　Lの横、SCCLと書いてあるのはシングルタップで;記号、ダブルタップで:記号が入力出来るようになっています。 +　マウスキーの割り当てがありますので、もし使用したい場合はrules.mkでMOUSEKEY_ENABLE = yesにしてmakeすると使用することができます。 + +## 48キー目について + +　このキーボードはEnterキーの上の2Uキーを1Ux2個にして使用する事が出来るようになっています。 使用する場合はキーマップの書き換えが必要です。 + +　各レイヤーの最下段の + +```c + XXXXX \ + // ExtraKey: Split backspace key or it is below the enter key. +``` + +　のXXXXXに任意のキーを入れることでPの右隣のキーとして動作するようになっています。その右隣りに従来のキーが配置されています。 + +## OS切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- KNRM: QMKのノーマル状態です。macだと正常に使える（はず）です +- KSWP: ノーマル状態のままWindowsで使用するとALTキーとGUI（win）キーが逆ですので、それを入れ換えます。Windowsユーザーはこちらのモードにしてください + +## NUMPADモードについて + +　Lower + DLNPキーを一度押下するとNumpadモードになります。通常モードに戻す場合はDLBSキーを押下してください。 + +## IME切り替え方法 + +　Winの場合、LowerレイヤーにKANJIキー（半角/全角　漢字）がありますので、Lower+KANJIで切り替えてください。 + +## ソフトウェアリセットについて + +　キーボードにはハードウェアのリセットボタンが付いていますが、ソフトウェアリセットをかけられます。 +　LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来、AdjustレイヤーのRSTを押下するとリセットがかかります。 + +## LEDの点灯切り替え方法 + +　Adjustレイヤーにあります。LowerとRaiseを同時押しでAdjustレイヤーを使うことが出来ます。 + +- RGBRST: LEDのリセット +- RGB_TOG: LEDのON/OFF切り替え +- RGB_MOD: LEDの光り方の変更 +- RGB_HUI: Hue+ 色合いを変更 +- RGB_HUD: Hue- 色合いを変更 +- RGB_SAI: Saturation+ 色の濃さを変更 +- RGB_SAD: Saturation- 色の濃さを変更 +- RGB_VAI: Value+ 明るさを変更 +- RGB_VAD: Value- 明るさを変更 diff --git a/keyboards/treadstone48/keymaps/like_jis_rs/rules.mk b/keyboards/treadstone48/keymaps/like_jis_rs/rules.mk new file mode 100644 index 0000000000..c34bb2e34a --- /dev/null +++ b/keyboards/treadstone48/keymaps/like_jis_rs/rules.mk @@ -0,0 +1,67 @@ + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SWAP_HANDS_ENABLE = no # Enable one-hand typing +TAP_DANCE_ENABLE = yes + +# If your custom treadstone48 pcb, you can rewrite to yes. +OLED_ENABLE = no # OLED_ENABLE +LED_UNDERGLOW_ENABLE = yes # LED underglow (Enable WS2812 RGB underlight.) +LED_ANIMATIONS = yes # LED animations + +# Other selectable option +IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) +LOCAL_GLCDFONT = no # use each keymaps "font.h" insted of "common/glcdfont.c" +RHYMESTONE_RIGHTHAND = no # If connect right hand side of the Rhymestone, set to yes. +ANGELINA_KEYMAP = no # If Alfa verstion use set to yes. + +ifeq ($(strip $(OLED_ENABLE)), yes) + OPT_DEFS += -DOLED_ENABLE +endif + +ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes) + RGBLIGHT_ENABLE = yes +else + RGBLIGHT_ENABLE = no +endif + +ifeq ($(strip $(LED_ANIMATIONS)), yes) + # OPT_DEFS += -DRGBLIGHT_ANIMATIONS + OPT_DEFS += -DLED_ANIMATIONS +endif + +ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) + OPT_DEFS += -DIOS_DEVICE_ENABLE +endif + +ifeq ($(strip $(LOCAL_GLCDFONT)), yes) + OPT_DEFS += -DLOCAL_GLCDFONT +endif + +ifeq ($(strip $(RHYMESTONE_RIGHTHAND)), yes) + OPT_DEFS += -DRHYMESTONE_RIGHTHAND +endif + +ifeq ($(strip $(ANGELINA_KEYMAP)), yes) + OPT_DEFS += -DANGELINA_KEYMAP +endif + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# If you want to change the display of OLED, you need to change here +SRC += ./common/oled_helper.c \ diff --git a/keyboards/treadstone48/pro_micro.h b/keyboards/treadstone48/pro_micro.h new file mode 100644 index 0000000000..f9e7ed75d9 --- /dev/null +++ b/keyboards/treadstone48/pro_micro.h @@ -0,0 +1,362 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0 PORTD |= (1<<5) +#define TXLED1 PORTD &= ~(1<<5) +#define RXLED0 PORTB |= (1<<0) +#define RXLED1 PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24; // D4 +static const uint8_t ADC7 = 25; // D6 +static const uint8_t ADC8 = 26; // D8 +static const uint8_t ADC9 = 27; // D9 +static const uint8_t ADC10 = 28; // D10 +static const uint8_t ADC11 = 29; // D12 + +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +// __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0 PD2 RXD1/INT2 +// D1 PD3 TXD1/INT3 +// D2 PD1 SDA SDA/INT1 +// D3# PD0 PWM8/SCL OC0B/SCL/INT0 +// D4 A6 PD4 ADC8 +// D5# PC6 ??? OC3A/#OC4A +// D6# A7 PD7 FastPWM #OC4D/ADC10 +// D7 PE6 INT6/AIN0 +// +// D8 A8 PB4 ADC11/PCINT4 +// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 +// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 +// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 +// D12 A11 PD6 T1/#OC4D/ADC9 +// D13# PC7 PWM10 CLK0/OC4A +// +// A0 D18 PF7 ADC7 +// A1 D19 PF6 ADC6 +// A2 D20 PF5 ADC5 +// A3 D21 PF4 ADC4 +// A4 D22 PF1 ADC1 +// A5 D23 PF0 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO D14 PB3 MISO,PCINT3 +// SCK D15 PB1 SCK,PCINT1 +// MOSI D16 PB2 MOSI,PCINT2 +// SS D17 PB0 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED D24 PD5 XCK1 +// RXLED D17 PB0 +// HWB PE2 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + TIMER0B, /* 3 */ + NOT_ON_TIMER, + TIMER3A, /* 5 */ + TIMER4D, /* 6 */ + NOT_ON_TIMER, + + NOT_ON_TIMER, + TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ + + NOT_ON_TIMER, + TIMER4A, /* 13 */ + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* Pins_Arduino_h */ diff --git a/keyboards/treadstone48/readme.md b/keyboards/treadstone48/readme.md new file mode 100644 index 0000000000..eef39c39b3 --- /dev/null +++ b/keyboards/treadstone48/readme.md @@ -0,0 +1,18 @@ +# treadstone48 + +![treadstone48](https://github.com/marksard/Keyboards/raw/master/_image/20181219-PC190003.jpg) + +A 47 (or 48) keys Symmetric Staggered keyboard. + +Keyboard Maintainer: [marksard](https://github.com/marksard) +Hardware Supported: The PCBs, controllers supported +Hardware Availability: links to where you can find this hardware + +Make example for this keyboard (after setting up your build environment): + + make treadstone48:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +[Build guide](https://github.com/marksard/Keyboards/blob/master/treadstpne48/documents/treadstone48_buildguide.md) +[Firmware](https://github.com/marksard/qmk_firmware/tree/my_customize/keyboards/treadstone48) diff --git a/keyboards/treadstone48/rev1/config.h b/keyboards/treadstone48/rev1/config.h new file mode 100644 index 0000000000..aa6dd9e634 --- /dev/null +++ b/keyboards/treadstone48/rev1/config.h @@ -0,0 +1,133 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef REV1_CONFIG_H +#define REV1_CONFIG_H + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xDFA3 +#define DEVICE_VER 0x0010 +#define MANUFACTURER marksard +#define PRODUCT treadstone48 +#define DESCRIPTION Symmetrical staggered 47+1 Keys Keyboard + +#define PREVENT_STUCK_MODIFIERS +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 150 + +/* Use I2C or Serial */ +#define USE_I2C +#define USE_SERIAL +//#define USE_MATRIX_I2C + +/* Select hand configuration */ +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +// OLED support +// see ./rules.mk: OLED_ENABLE=yes or no +#ifdef OLED_ENABLE + #define SSD1306OLED +#endif + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 16 +#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2, B6 } + +// wiring of each half +#define MATRIX_COLS 6 +#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_TIMER +//#define RGBLED_NUM 12 // Number of LEDs. see ./keymaps/default/config.h +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD + +// treadstone48 keyboard RGB LED support +//#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no +// see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes +#define RGBLED_NUM 12 + +#ifndef IOS_DEVICE_ENABLE + #define RGBLIGHT_LIMIT_VAL 180 + #define RGBLIGHT_VAL_STEP 17 +#else + #define RGBLIGHT_LIMIT_VAL 50 + #define RGBLIGHT_VAL_STEP 4 +#endif +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 + +#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) +// USB_MAX_POWER_CONSUMPTION value for treadstone48 keyboard +// 120 RGBoff, OLEDoff +// 120 OLED +// 330 RGB 6 +// 300 RGB 32 +// 310 OLED & RGB 32 + #define USB_MAX_POWER_CONSUMPTION 400 +#else + // fix iPhone and iPad power adapter issue + // iOS device need lessthan 100 + #define USB_MAX_POWER_CONSUMPTION 100 +#endif + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#endif diff --git a/keyboards/treadstone48/rev1/info.json b/keyboards/treadstone48/rev1/info.json new file mode 100644 index 0000000000..df9e7591b5 --- /dev/null +++ b/keyboards/treadstone48/rev1/info.json @@ -0,0 +1,261 @@ +{ + "keyboard_name": "Treadstone48", + "url": "https://github.com/marksard/Keyboards", + "maintainer": "marksard", + "width": 14.75, + "height": 4, + "layouts": { + "LAYOUT_base": { + "layout": [ + { + "label": "Esc", + "x": 1, + "y": 0 + }, + { + "label": "Q", + "x": 2.25, + "y": 0 + }, + { + "label": "W", + "x": 3.25, + "y": 0 + }, + { + "label": "E", + "x": 4.25, + "y": 0 + }, + { + "label": "R", + "x": 5.25, + "y": 0 + }, + { + "label": "T", + "x": 6.25, + "y": 0 + }, + { + "label": "Y", + "x": 7.75, + "y": 0 + }, + { + "label": "U", + "x": 8.75, + "y": 0 + }, + { + "label": "I", + "x": 9.75, + "y": 0 + }, + { + "label": "O", + "x": 10.75, + "y": 0 + }, + { + "label": "P", + "x": 11.75, + "y": 0 + }, + { + "label": "-", + "x": 13.75, + "y": 0 + }, + { + "label": "Tab", + "x": 1, + "y": 1, + "w": 1.5 + }, + { + "label": "A", + "x": 2.5, + "y": 1 + }, + { + "label": "S", + "x": 3.5, + "y": 1 + }, + { + "label": "D", + "x": 4.5, + "y": 1 + }, + { + "label": "F", + "x": 5.5, + "y": 1 + }, + { + "label": "G", + "x": 6.5, + "y": 1 + }, + { + "label": "H", + "x": 7.5, + "y": 1 + }, + { + "label": "J", + "x": 8.5, + "y": 1 + }, + { + "label": "K", + "x": 9.5, + "y": 1 + }, + { + "label": "L", + "x": 10.5, + "y": 1 + }, + { + "label": ":", + "x": 11.5, + "y": 1 + }, + { + "label": "Enter", + "x": 12.5, + "y": 1, + "w": 2.25 + }, + { + "label": "Shift", + "x": 0, + "y": 2, + "w": 2.25 + }, + { + "label": "Z", + "x": 2.25, + "y": 2 + }, + { + "label": "X", + "x": 3.25, + "y": 2 + }, + { + "label": "C", + "x": 4.25, + "y": 2 + }, + { + "label": "V", + "x": 5.25, + "y": 2 + }, + { + "label": "B", + "x": 6.25, + "y": 2 + }, + { + "label": "N", + "x": 7.75, + "y": 2 + }, + { + "label": "M", + "x": 8.75, + "y": 2 + }, + { + "label": "<", + "x": 9.75, + "y": 2 + }, + { + "label": ">", + "x": 10.75, + "y": 2 + }, + { + "label": "?", + "x": 11.75, + "y": 2 + }, + { + "label": "\u2191", + "x": 12.75, + "y": 2 + }, + { + "label": "Ctrl", + "x": 0.75, + "y": 3, + "w": 1.25 + }, + { + "label": "Win", + "x": 2, + "y": 3, + "w": 1.25 + }, + { + "label": "Alt", + "x": 3.25, + "y": 3, + "w": 1.25 + }, + { + "label": "Lower", + "x": 4.5, + "y": 3 + }, + { + "label": "BackSpace", + "x": 5.5, + "y": 3, + "w": 2 + }, + { + "x": 7.5, + "y": 3, + "w": 2 + }, + { + "label": "Raise", + "x": 9.5, + "y": 3 + }, + { + "label": "Menu", + "x": 10.5, + "y": 3, + "w": 1.25 + }, + { + "label": "\u2190", + "x": 11.75, + "y": 3 + }, + { + "label": "\u2193", + "x": 12.75, + "y": 3 + }, + { + "label": "\u2192", + "x": 13.75, + "y": 3 + }, + { + "label": "_", + "x": 12.75, + "y": 0 + } + ] + } + } +} diff --git a/keyboards/treadstone48/rev1/matrix.c b/keyboards/treadstone48/rev1/matrix.c new file mode 100644 index 0000000000..8685a8125e --- /dev/null +++ b/keyboards/treadstone48/rev1/matrix.c @@ -0,0 +1,357 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" + +#ifdef USE_MATRIX_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "split_scomm.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; +uint8_t is_master = 0 ; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); +static uint8_t matrix_master_scan(void); + + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + TXLED0; + RXLED0; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + is_master = has_usb(); + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_MATRIX_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(int master_changed) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; +#ifdef SERIAL_USE_MULTI_TRANSACTION + int ret=serial_update_buffers(master_changed); +#else + int ret=serial_update_buffers(); +#endif + if (ret ) { + if(ret==2) RXLED1; + return 1; + } + RXLED0; + memcpy(&matrix[slaveOffset], + (void *)serial_slave_buffer, sizeof(serial_slave_buffer)); + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + if (is_master) { + matrix_master_scan(); + }else{ + matrix_slave_scan(); + int offset = (isLeftHand) ? ROWS_PER_HAND : 0; + memcpy(&matrix[offset], + (void *)serial_master_buffer, sizeof(serial_master_buffer)); + matrix_scan_quantum(); + } + return 1; +} + + +uint8_t matrix_master_scan(void) { + + int ret = _matrix_scan(); + int mchanged = 1; + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_MATRIX_I2C +// for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ +// i2c_slave_buffer[i] = matrix[offset+i]; +// } +#else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + mchanged = memcmp((void *)serial_master_buffer, + &matrix[offset], sizeof(serial_master_buffer)); + #endif + memcpy((void *)serial_master_buffer, + &matrix[offset], sizeof(serial_master_buffer)); +#endif + +#ifdef USE_MATRIX_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction(mchanged) ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + matrix_scan_quantum(); + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_MATRIX_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + #ifdef SERIAL_USE_MULTI_TRANSACTION + int change = 0; + #endif + for (int i = 0; i < ROWS_PER_HAND; ++i) { + #ifdef SERIAL_USE_MULTI_TRANSACTION + if( serial_slave_buffer[i] != matrix[offset+i] ) + change = 1; + #endif + serial_slave_buffer[i] = matrix[offset+i]; + } + #ifdef SERIAL_USE_MULTI_TRANSACTION + slave_buffer_change_count += change; + #endif +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/treadstone48/rev1/rev1.c b/keyboards/treadstone48/rev1/rev1.c new file mode 100644 index 0000000000..2637864271 --- /dev/null +++ b/keyboards/treadstone48/rev1/rev1.c @@ -0,0 +1,15 @@ +#include "treadstone48.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + //led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + matrix_init_user(); +}; + diff --git a/keyboards/treadstone48/rev1/rev1.h b/keyboards/treadstone48/rev1/rev1.h new file mode 100644 index 0000000000..c6145398dd --- /dev/null +++ b/keyboards/treadstone48/rev1/rev1.h @@ -0,0 +1,202 @@ +#ifndef REV1_H +#define REV1_CONFIG_H + +#include "../treadstone48.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +#ifdef RGBLIGHT_ENABLE +//rgb led driver +#include "ws2812.h" +#endif + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + +// full Keymap +// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) +#define LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R00, R01, R02, R03, R04, R05, R40, R41, R42, R43, R44, R45, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R10, R11, R12, R13, R14, R15, R50, R51, R52, R53, R54, R55, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R20, R21, R22, R23, R24, R25, R60, R61, R62, R63, R64, R65, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, R30, R31, R32, R33, R34, R35, R70, R71, R72, R73, R74, R75 \ + ) \ + { \ + { L45, L44, L43, L42, L41, L40 }, \ + { L55, L54, L53, L52, L51, L50 }, \ + { L65, L64, L63, L62, L61, L60 }, \ + { L75, L74, L73, L72, L71, L70 }, \ + { L05, L04, L03, L02, L01, L00 }, \ + { L15, L14, L13, L12, L11, L10 }, \ + { L25, L24, L23, L22, L21, L20 }, \ + { L35, L34, L33, L32, L31, L30 }, \ + { R45, R44, R43, R42, R41, R40 }, \ + { R55, R54, R53, R52, R51, R50 }, \ + { R65, R64, R63, R62, R61, R60 }, \ + { R75, R74, R73, R72, R71, R70 }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, R30 }, \ + } + +#define K_N KC_NO + +////////////////////////////////////////////////////////////////////////////// +// When only use Treadstone48. +// L75 is ExtraKey +////////////////////////////////////////////////////////////////////////////// +#define LAYOUT_base( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75 \ + ) \ + LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N \ + ) + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_base_kc( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75 \ + ) \ + LAYOUT_base( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L50, KC_##L51, KC_##L52, KC_##L53, KC_##L54, KC_##L55, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L60, KC_##L61, KC_##L62, KC_##L63, KC_##L64, KC_##L65, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L70, KC_##L71, KC_##L72, KC_##L73, KC_##L74, KC_##L75 \ + ) +////////////////////////////////////////////////////////////////////////////// + + +////////////////////////////////////////////////////////////////////////////// +// When connecting Rhymestone to Treadstone48. +// L75 is ExtraKey +////////////////////////////////////////////////////////////////////////////// +#define LAYOUT_rs( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R60, R61, R62, R63, R64, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, R70, R71, R72, R73, R74, L75 \ + ) \ + LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R44, R43, R42, R41, R40, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R54, R53, R52, R51, R50, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R64, R63, R62, R61, R60, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R74, R73, R72, R71, R70 \ + ) + +// When use right hand side of the Rhymestone. +#ifdef RHYMESTONE_RIGHTHAND +#undef LAYOUT_rs +#define LAYOUT_rs( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R60, R61, R62, R63, R64, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, R70, R71, R72, R73, R74, L75 \ + ) \ + LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R60, R61, R62, R63, R64, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R70, R71, R72, R73, R74 \ + ) +#endif + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_rs_kc( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R60, R61, R62, R63, R64, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, R70, R71, R72, R73, R74 \ + ) \ + LAYOUT_rs( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L50, KC_##L51, KC_##L52, KC_##L53, KC_##L54, KC_##L55, KC_##R50, KC_##R51, KC_##R52, KC_##R53, KC_##R54, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L60, KC_##L61, KC_##L62, KC_##L63, KC_##L64, KC_##L65, KC_##R60, KC_##R61, KC_##R62, KC_##R63, KC_##R64, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L70, KC_##L71, KC_##L72, KC_##L73, KC_##L74, KC_##L75, KC_##R70, KC_##R71, KC_##R72, KC_##R73, KC_##R74 \ + ) +////////////////////////////////////////////////////////////////////////////// + + + +////////////////////////////////////////////////////////////////////////////// +// Alpha version keymap. +// L30 is ExtraKey +////////////////////////////////////////////////////////////////////////////// +#ifdef ANGELINA_KEYMAP +#undef LAYOUT_base +#undef LAYOUT_base_kc +#undef LAYOUT_rs +#undef LAYOUT_rs_kc + +#define LAYOUT_base( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, \ + L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, L30 \ + ) \ + LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N, K_N \ + ) + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_base_kc( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75 \ + ) \ + LAYOUT_base( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L50, KC_##L51, KC_##L52, KC_##L53, KC_##L54, KC_##L55, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L60, KC_##L61, KC_##L62, KC_##L63, KC_##L64, KC_##L65, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L70, KC_##L71, KC_##L72, KC_##L73, KC_##L74, KC_##L75 \ + ) + +#define LAYOUT_rs( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R60, R61, R62, R63, R64, \ + L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, R70, R71, R72, R73, R74, L30 \ + ) \ + LAYOUT_full( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R44, R43, R42, R41, R40, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R54, R53, R52, R51, R50, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R64, R63, R62, R61, R60, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, K_N, K_N, K_N, K_N, K_N, K_N, K_N, R74, R73, R72, R71, R70 \ + ) + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_rs_kc( \ + L00, L01, L02, L03, L04, L05, L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, \ + L10, L11, L12, L13, L14, L15, L50, L51, L52, L53, L54, L55, R50, R51, R52, R53, R54, \ + L20, L21, L22, L23, L24, L25, L60, L61, L62, L63, L64, L65, R60, R61, R62, R63, R64, \ + L30, L31, L32, L33, L34, L35, L70, L71, L72, L73, L74, L75, R70, R71, R72, R73, R74 \ + ) \ + LAYOUT_rs( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L50, KC_##L51, KC_##L52, KC_##L53, KC_##L54, KC_##L55, KC_##R50, KC_##R51, KC_##R52, KC_##R53, KC_##R54, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L60, KC_##L61, KC_##L62, KC_##L63, KC_##L64, KC_##L65, KC_##R60, KC_##R61, KC_##R62, KC_##R63, KC_##R64, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L70, KC_##L71, KC_##L72, KC_##L73, KC_##L74, KC_##L75, KC_##R70, KC_##R71, KC_##R72, KC_##R73, KC_##R74 \ + ) + +#endif +////////////////////////////////////////////////////////////////////////////// + +#endif diff --git a/keyboards/treadstone48/rev1/rules.mk b/keyboards/treadstone48/rev1/rules.mk new file mode 100644 index 0000000000..6028b5a5b9 --- /dev/null +++ b/keyboards/treadstone48/rev1/rules.mk @@ -0,0 +1,3 @@ +SRC += rev1/matrix.c +SRC += rev1/split_util.c +SRC += rev1/split_scomm.c diff --git a/keyboards/treadstone48/rev1/serial_config.h b/keyboards/treadstone48/rev1/serial_config.h new file mode 100644 index 0000000000..37135213d5 --- /dev/null +++ b/keyboards/treadstone48/rev1/serial_config.h @@ -0,0 +1,8 @@ +//// #error rev2 serial config + +#ifndef SOFT_SERIAL_PIN +/* Soft Serial defines */ +#define SOFT_SERIAL_PIN D2 + +#define SERIAL_USE_MULTI_TRANSACTION +#endif diff --git a/keyboards/treadstone48/rev1/serial_config_simpleapi.h b/keyboards/treadstone48/rev1/serial_config_simpleapi.h new file mode 100644 index 0000000000..e2d22a41e7 --- /dev/null +++ b/keyboards/treadstone48/rev1/serial_config_simpleapi.h @@ -0,0 +1,8 @@ +#ifndef SERIAL_CONFIG_SIMPLEAPI_H +#define SERIAL_CONFIG_SIMPLEAPI_H + +#undef SERIAL_USE_MULTI_TRANSACTION +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 + +#endif // SERIAL_CONFIG_SIMPLEAPI_H diff --git a/keyboards/treadstone48/rev1/split_scomm.c b/keyboards/treadstone48/rev1/split_scomm.c new file mode 100644 index 0000000000..ada7867960 --- /dev/null +++ b/keyboards/treadstone48/rev1/split_scomm.c @@ -0,0 +1,92 @@ +#ifdef USE_SERIAL +#ifdef SERIAL_USE_MULTI_TRANSACTION +/* --- USE flexible API (using multi-type transaction function) --- */ + +#include +#include +#include +#include +#include "serial.h" +#ifdef CONSOLE_ENABLE + #include +#endif + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; +uint8_t volatile status_com = 0; +uint8_t volatile status1 = 0; +uint8_t slave_buffer_change_count = 0; +uint8_t s_change_old = 0xff; +uint8_t s_change_new = 0xff; + +SSTD_t transactions[] = { +#define GET_SLAVE_STATUS 0 + /* master buffer not changed, only recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + 0, NULL, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define PUT_MASTER_GET_SLAVE_STATUS 1 + /* master buffer changed need send, and recive slave_buffer_change_count */ + { (uint8_t *)&status_com, + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + sizeof(slave_buffer_change_count), &slave_buffer_change_count, + }, +#define GET_SLAVE_BUFFER 2 + /* recive serial_slave_buffer */ + { (uint8_t *)&status1, + 0, NULL, + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + } +}; + +void serial_master_init(void) +{ + soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); +} + +void serial_slave_init(void) +{ + soft_serial_target_init(transactions, TID_LIMIT(transactions)); +} + +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers(int master_update) +{ + int status, smatstatus; + static int need_retry = 0; + + if( s_change_old != s_change_new ) { + smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER); + if( smatstatus == TRANSACTION_END ) { + s_change_old = s_change_new; +#ifdef CONSOLE_ENABLE + uprintf("slave matrix = %b %b %b %b %b\n", + serial_slave_buffer[0], serial_slave_buffer[1], + serial_slave_buffer[2], serial_slave_buffer[3], + serial_slave_buffer[4] ); +#endif + } + } else { + // serial_slave_buffer dosen't change + smatstatus = TRANSACTION_END; // dummy status + } + + if( !master_update && !need_retry) { + status = soft_serial_transaction(GET_SLAVE_STATUS); + } else { + status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS); + } + if( status == TRANSACTION_END ) { + s_change_new = slave_buffer_change_count; + need_retry = 0; + } else { + need_retry = 1; + } + return smatstatus; +} + +#endif // SERIAL_USE_MULTI_TRANSACTION +#endif /* USE_SERIAL */ diff --git a/keyboards/treadstone48/rev1/split_scomm.h b/keyboards/treadstone48/rev1/split_scomm.h new file mode 100644 index 0000000000..16887eb74f --- /dev/null +++ b/keyboards/treadstone48/rev1/split_scomm.h @@ -0,0 +1,21 @@ +#pragma once + +#ifndef SERIAL_USE_MULTI_TRANSACTION +/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */ +#include "serial.h" + +#else +/* --- USE flexible API (using multi-type transaction function) --- */ +// Buffers for master - slave communication +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 + +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; +extern uint8_t slave_buffer_change_count; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(int master_changed); + +#endif diff --git a/keyboards/treadstone48/rev1/split_util.c b/keyboards/treadstone48/rev1/split_util.c new file mode 100644 index 0000000000..e1ff8b4379 --- /dev/null +++ b/keyboards/treadstone48/rev1/split_util.c @@ -0,0 +1,70 @@ +#include +#include +#include +#include +#include +#include +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" + +#ifdef USE_MATRIX_I2C +# include "i2c.h" +#else +# include "split_scomm.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { + +#ifdef USE_MATRIX_I2C + i2c_master_init(); +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { + +#ifdef USE_MATRIX_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1< +#include "eeconfig.h" + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); + +void matrix_master_OLED_init (void); diff --git a/keyboards/treadstone48/rules.mk b/keyboards/treadstone48/rules.mk new file mode 100644 index 0000000000..6ddbdaf80e --- /dev/null +++ b/keyboards/treadstone48/rules.mk @@ -0,0 +1,73 @@ +SRC += i2c.c +SRC += serial.c +SRC += ssd1306.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SUBPROJECT_rev1 = no +USE_I2C = yes +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes + +DEFAULT_FOLDER = treadstone48/rev1 diff --git a/keyboards/treadstone48/serial.c b/keyboards/treadstone48/serial.c new file mode 100644 index 0000000000..6006ebf1bd --- /dev/null +++ b/keyboards/treadstone48/serial.c @@ -0,0 +1,590 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + * + * 2018-10-28 checked + * avr-gcc 4.9.2 + * avr-gcc 5.4.0 + * avr-gcc 7.3.0 + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include +#include +#include +#include +#include +#include "serial.h" +//#include + +#ifdef SOFT_SERIAL_PIN + +#ifdef __AVR_ATmega32U4__ + // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. + #ifdef USE_I2C + #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 + #error Using ATmega32U4 I2C, so can not use PD0, PD1 + #endif + #endif + + #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 + #define SERIAL_PIN_DDR DDRD + #define SERIAL_PIN_PORT PORTD + #define SERIAL_PIN_INPUT PIND + #if SOFT_SERIAL_PIN == D0 + #define SERIAL_PIN_MASK _BV(PD0) + #define EIMSK_BIT _BV(INT0) + #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) + #define SERIAL_PIN_INTERRUPT INT0_vect + #elif SOFT_SERIAL_PIN == D1 + #define SERIAL_PIN_MASK _BV(PD1) + #define EIMSK_BIT _BV(INT1) + #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) + #define SERIAL_PIN_INTERRUPT INT1_vect + #elif SOFT_SERIAL_PIN == D2 + #define SERIAL_PIN_MASK _BV(PD2) + #define EIMSK_BIT _BV(INT2) + #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) + #define SERIAL_PIN_INTERRUPT INT2_vect + #elif SOFT_SERIAL_PIN == D3 + #define SERIAL_PIN_MASK _BV(PD3) + #define EIMSK_BIT _BV(INT3) + #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) + #define SERIAL_PIN_INTERRUPT INT3_vect + #endif + #elif SOFT_SERIAL_PIN == E6 + #define SERIAL_PIN_DDR DDRE + #define SERIAL_PIN_PORT PORTE + #define SERIAL_PIN_INPUT PINE + #define SERIAL_PIN_MASK _BV(PE6) + #define EIMSK_BIT _BV(INT6) + #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) + #define SERIAL_PIN_INTERRUPT INT6_vect + #else + #error invalid SOFT_SERIAL_PIN value + #endif + +#else + #error serial.c now support ATmega32U4 only +#endif + +//////////////// for backward compatibility //////////////////////////////// +#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION) +/* --- USE OLD API (compatible with let's split serial.c) */ + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; + #endif + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + #endif + uint8_t volatile status0 = 0; + +SSTD_t transactions[] = { + { (uint8_t *)&status0, + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer, + #else + 0, (uint8_t *)NULL, + #endif + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer + #else + 0, (uint8_t *)NULL, + #endif + } +}; + +void serial_master_init(void) +{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } + +void serial_slave_init(void) +{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); } + +// 0 => no error +// 1 => slave did not respond +// 2 => checksum error +int serial_update_buffers() +{ + int result; + result = soft_serial_transaction(); + return result; +} + +#endif // end of OLD API (compatible with let's split serial.c) +//////////////////////////////////////////////////////////////////////////// + +#define ALWAYS_INLINE __attribute__((always_inline)) +#define NO_INLINE __attribute__((noinline)) +#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) + +// parity check +#define ODD_PARITY 1 +#define EVEN_PARITY 0 +#define PARITY EVEN_PARITY + +#ifdef SERIAL_DELAY + // custom setup in config.h + // #define TID_SEND_ADJUST 2 + // #define SERIAL_DELAY 6 // micro sec + // #define READ_WRITE_START_ADJUST 30 // cycles + // #define READ_WRITE_WIDTH_ADJUST 8 // cycles +#else +// ============ Standard setups ============ + +#ifndef SELECT_SOFT_SERIAL_SPEED +#define SELECT_SOFT_SERIAL_SPEED 1 +// 0: about 189kbps +// 1: about 137kbps (default) +// 2: about 75kbps +// 3: about 39kbps +// 4: about 26kbps +// 5: about 20kbps +#endif + +#if __GNUC__ < 6 + #define TID_SEND_ADJUST 14 +#else + #define TID_SEND_ADJUST 2 +#endif + +#if SELECT_SOFT_SERIAL_SPEED == 0 + // Very High speed + #define SERIAL_DELAY 4 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 34 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 1 + // High speed + #define SERIAL_DELAY 6 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 30 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 2 + // Middle speed + #define SERIAL_DELAY 12 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 3 + // Low speed + #define SERIAL_DELAY 24 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 4 + // Very Low speed + #define SERIAL_DELAY 36 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 5 + // Ultra Low speed + #define SERIAL_DELAY 48 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#else +#error invalid SELECT_SOFT_SERIAL_SPEED value +#endif /* SELECT_SOFT_SERIAL_SPEED */ +#endif /* SERIAL_DELAY */ + +#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) +#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) + +#define SLAVE_INT_WIDTH_US 1 +#ifndef SERIAL_USE_MULTI_TRANSACTION + #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY +#else + #define SLAVE_INT_ACK_WIDTH_UNIT 2 + #define SLAVE_INT_ACK_WIDTH 4 +#endif + +static SSTD_t *Transaction_table = NULL; +static uint8_t Transaction_table_size = 0; + +inline static void serial_delay(void) ALWAYS_INLINE; +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static void serial_delay_half1(void) ALWAYS_INLINE; +inline static +void serial_delay_half1(void) { + _delay_us(SERIAL_DELAY_HALF1); +} + +inline static void serial_delay_half2(void) ALWAYS_INLINE; +inline static +void serial_delay_half2(void) { + _delay_us(SERIAL_DELAY_HALF2); +} + +inline static void serial_output(void) ALWAYS_INLINE; +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static void serial_input_with_pullup(void) ALWAYS_INLINE; +inline static +void serial_input_with_pullup(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static void serial_low(void) ALWAYS_INLINE; +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static void serial_high(void) ALWAYS_INLINE; +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_output(); + serial_high(); +} + +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_input_with_pullup(); + + // Enable INT0-INT3,INT6 + EIMSK |= EIMSK_BIT; +#if SERIAL_PIN_MASK == _BV(PE6) + // Trigger on falling edge of INT6 + EICRB &= EICRx_BIT; +#else + // Trigger on falling edge of INT0-INT3 + EICRA &= EICRx_BIT; +#endif +} + +// Used by the sender to synchronize timing with the reciver. +static void sync_recv(void) NO_INLINE; +static +void sync_recv(void) { + for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { + } + // This shouldn't hang if the target disconnects because the + // serial line will float to high if the target does disconnect. + while (!serial_read_pin()); +} + +// Used by the reciver to send a synchronization signal to the sender. +static void sync_send(void) NO_INLINE; +static +void sync_send(void) { + serial_low(); + serial_delay(); + serial_high(); +} + +// Reads a byte from the serial line +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { + uint8_t byte, i, p, pb; + + _delay_sub_us(READ_WRITE_START_ADJUST); + for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { + serial_delay_half1(); // read the middle of pulses + if( serial_read_pin() ) { + byte = (byte << 1) | 1; p ^= 1; + } else { + byte = (byte << 1) | 0; p ^= 0; + } + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + } + /* recive parity bit */ + serial_delay_half1(); // read the middle of pulses + pb = serial_read_pin(); + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + + *pterrcount += (p != pb)? 1 : 0; + + return byte; +} + +// Sends a byte with MSB ordering +void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; +void serial_write_chunk(uint8_t data, uint8_t bit) { + uint8_t b, p; + for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { + if(data & b) { + serial_high(); p ^= 1; + } else { + serial_low(); p ^= 0; + } + serial_delay(); + } + /* send parity bit */ + if(p & 1) { serial_high(); } + else { serial_low(); } + serial_delay(); + + serial_low(); // sync_send() / senc_recv() need raise edge +} + +static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +void serial_send_packet(uint8_t *buffer, uint8_t size) { + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + data = buffer[i]; + sync_send(); + serial_write_chunk(data,8); + } +} + +static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { + uint8_t pecount = 0; + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + sync_recv(); + data = serial_read_chunk(&pecount, 8); + buffer[i] = data; + } + return pecount == 0; +} + +inline static +void change_sender2reciver(void) { + sync_send(); //0 + serial_delay_half1(); //1 + serial_low(); //2 + serial_input_with_pullup(); //2 + serial_delay_half1(); //3 +} + +inline static +void change_reciver2sender(void) { + sync_recv(); //0 + serial_delay(); //1 + serial_low(); //3 + serial_output(); //3 + serial_delay_half1(); //4 +} + +static inline uint8_t nibble_bits_count(uint8_t bits) +{ + bits = (bits & 0x5) + (bits >> 1 & 0x5); + bits = (bits & 0x3) + (bits >> 2 & 0x3); + return bits; +} + +// interrupt handle to be used by the target device +ISR(SERIAL_PIN_INTERRUPT) { + +#ifndef SERIAL_USE_MULTI_TRANSACTION + serial_low(); + serial_output(); + SSTD_t *trans = Transaction_table; +#else + // recive transaction table index + uint8_t tid, bits; + uint8_t pecount = 0; + sync_recv(); + bits = serial_read_chunk(&pecount,7); + tid = bits>>3; + bits = (bits&7) != nibble_bits_count(tid); + if( bits || pecount> 0 || tid > Transaction_table_size ) { + return; + } + serial_delay_half1(); + + serial_high(); // response step1 low->high + serial_output(); + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); + SSTD_t *trans = &Transaction_table[tid]; + serial_low(); // response step2 ack high->low +#endif + + // target send phase + if( trans->target2initiator_buffer_size > 0 ) + serial_send_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size); + // target switch to input + change_sender2reciver(); + + // target recive phase + if( trans->initiator2target_buffer_size > 0 ) { + if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size) ) { + *trans->status = TRANSACTION_ACCEPTED; + } else { + *trans->status = TRANSACTION_DATA_ERROR; + } + } else { + *trans->status = TRANSACTION_ACCEPTED; + } + + sync_recv(); //weit initiator output to high +} + +///////// +// start transaction by initiator +// +// int soft_serial_transaction(int sstd_index) +// +// Returns: +// TRANSACTION_END +// TRANSACTION_NO_RESPONSE +// TRANSACTION_DATA_ERROR +// this code is very time dependent, so we need to disable interrupts +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void) { + SSTD_t *trans = Transaction_table; +#else +int soft_serial_transaction(int sstd_index) { + if( sstd_index > Transaction_table_size ) + return TRANSACTION_TYPE_ERROR; + SSTD_t *trans = &Transaction_table[sstd_index]; +#endif + cli(); + + // signal to the target that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(SLAVE_INT_WIDTH_US); + +#ifndef SERIAL_USE_MULTI_TRANSACTION + // wait for the target response + serial_input_with_pullup(); + _delay_us(SLAVE_INT_RESPONSE_TIME); + + // check if the target is present + if (serial_read_pin()) { + // target failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + +#else + // send transaction table index + int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); + sync_send(); + _delay_sub_us(TID_SEND_ADJUST); + serial_write_chunk(tid, 7); + serial_delay_half1(); + + // wait for the target response (step1 low->high) + serial_input_with_pullup(); + while( !serial_read_pin() ) { + _delay_sub_us(2); + } + + // check if the target is present (step2 high->low) + for( int i = 0; serial_read_pin(); i++ ) { + if (i > SLAVE_INT_ACK_WIDTH + 1) { + // slave failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); + } +#endif + + // initiator recive phase + // if the target is present syncronize with it + if( trans->target2initiator_buffer_size > 0 ) { + if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size) ) { + serial_output(); + serial_high(); + *trans->status = TRANSACTION_DATA_ERROR; + sei(); + return TRANSACTION_DATA_ERROR; + } + } + + // initiator switch to output + change_reciver2sender(); + + // initiator send phase + if( trans->initiator2target_buffer_size > 0 ) { + serial_send_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size); + } + + // always, release the line when not in use + sync_send(); + + *trans->status = TRANSACTION_END; + sei(); + return TRANSACTION_END; +} + +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index) { + SSTD_t *trans = &Transaction_table[sstd_index]; + cli(); + int retval = *trans->status; + *trans->status = 0;; + sei(); + return retval; +} +#endif + +#endif + +// Helix serial.c history +// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) +// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) +// (adjusted with avr-gcc 4.9.2) +// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) +// (adjusted with avr-gcc 4.9.2) +// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) +// (adjusted with avr-gcc 4.9.2) +// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) +// (adjusted with avr-gcc 7.3.0) +// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) +// (adjusted with avr-gcc 5.4.0, 7.3.0) diff --git a/keyboards/treadstone48/serial.h b/keyboards/treadstone48/serial.h new file mode 100644 index 0000000000..5deaf789e3 --- /dev/null +++ b/keyboards/treadstone48/serial.h @@ -0,0 +1,86 @@ +#pragma once + +#include + +// ///////////////////////////////////////////////////////////////// +// Need Soft Serial defines in config.h +// ///////////////////////////////////////////////////////////////// +// ex. +// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 +// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 +// // 1: about 137kbps (default) +// // 2: about 75kbps +// // 3: about 39kbps +// // 4: about 26kbps +// // 5: about 20kbps +// +// //// USE OLD API (compatible with let's split serial.c) +// ex. +// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +// #define SERIAL_MASTER_BUFFER_LENGTH 1 +// +// //// USE NEW API +// //// USE simple API (using signle-type transaction function) +// #define SERIAL_USE_SINGLE_TRANSACTION +// //// USE flexible API (using multi-type transaction function) +// #define SERIAL_USE_MULTI_TRANSACTION +// +// ///////////////////////////////////////////////////////////////// + + +//////////////// for backward compatibility //////////////////////////////// +#if !defined(SERIAL_USE_SINGLE_TRANSACTION) && !defined(SERIAL_USE_MULTI_TRANSACTION) +/* --- USE OLD API (compatible with let's split serial.c) */ + #if SERIAL_SLAVE_BUFFER_LENGTH > 0 + extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; + #endif + #if SERIAL_MASTER_BUFFER_LENGTH > 0 + extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + #endif + + void serial_master_init(void); + void serial_slave_init(void); + int serial_update_buffers(void); + +#endif // end of USE OLD API +//////////////////////////////////////////////////////////////////////////// + +// Soft Serial Transaction Descriptor +typedef struct _SSTD_t { + uint8_t *status; + uint8_t initiator2target_buffer_size; + uint8_t *initiator2target_buffer; + uint8_t target2initiator_buffer_size; + uint8_t *target2initiator_buffer; +} SSTD_t; +#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) + +// initiator is transaction start side +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); +// target is interrupt accept side +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); + +// initiator resullt +#define TRANSACTION_END 0 +#define TRANSACTION_NO_RESPONSE 0x1 +#define TRANSACTION_DATA_ERROR 0x2 +#define TRANSACTION_TYPE_ERROR 0x4 +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void); +#else +int soft_serial_transaction(int sstd_index); +#endif + +// target status +// *SSTD_t.status has +// initiator: +// TRANSACTION_END +// or TRANSACTION_NO_RESPONSE +// or TRANSACTION_DATA_ERROR +// target: +// TRANSACTION_DATA_ERROR +// or TRANSACTION_ACCEPTED +#define TRANSACTION_ACCEPTED 0x8 +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index); +#endif diff --git a/keyboards/treadstone48/ssd1306.c b/keyboards/treadstone48/ssd1306.c new file mode 100644 index 0000000000..dd3290ba0c --- /dev/null +++ b/keyboards/treadstone48/ssd1306.c @@ -0,0 +1,342 @@ + +#ifdef SSD1306OLED + +#include "ssd1306.h" +#include "i2c.h" +#include +#include "print.h" +#ifndef LOCAL_GLCDFONT +#include "common/glcdfont.c" +#else +#include +#endif +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "timer.h" + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ + +// 'last_flush' is declared as uint16_t, +// so this must be less than 65535 +#define ScreenOffInterval 60000 /* milliseconds */ +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +static bool force_dirty = true; + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(SSD1306_ADDRESS)) { + xprintf("failed to start write to %d\n", SSD1306_ADDRESS); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} +#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(bool rotate) { + bool success = false; + + i2c_master_init(); + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + + if(rotate){ + // the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); + }else{ + // Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); + } + + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(SSD1306_ADDRESS)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } + + // 1 column of space between chars (it's not included in the glyph) + //i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_master_stop(); +#if DEBUG_TO_SCREEN + --displaying; +#endif +} + +void iota_gfx_flush(void) { + matrix_render(&display); +} + +__attribute__ ((weak)) +void iota_gfx_task_user(void) { +} + +void iota_gfx_task(void) { + iota_gfx_task_user(); + + if (display.dirty|| force_dirty) { + iota_gfx_flush(); + force_dirty = false; + } + + if (timer_elapsed(last_flush) > ScreenOffInterval) { + iota_gfx_off(); + } +} + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record) { + force_dirty = true; + return true; +} + +#endif diff --git a/keyboards/treadstone48/ssd1306.h b/keyboards/treadstone48/ssd1306.h new file mode 100644 index 0000000000..49f258efa9 --- /dev/null +++ b/keyboards/treadstone48/ssd1306.h @@ -0,0 +1,90 @@ +#pragma once + +#include +#include +#include "pincontrol.h" +#include "action.h" + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + +// Controls the SSD1306 128x32 OLED display via i2c + +#ifndef SSD1306_ADDRESS +#define SSD1306_ADDRESS 0x3C +#endif + +#define DisplayHeight 32 +#define DisplayWidth 128 + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +struct CharacterMatrix display; + +bool iota_gfx_init(bool rotate); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +void iota_gfx_task_user(void); + +void matrix_clear(struct CharacterMatrix *matrix); +void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c); +void matrix_write(struct CharacterMatrix *matrix, const char *data); +void matrix_write_P(struct CharacterMatrix *matrix, const char *data); +void matrix_render(struct CharacterMatrix *matrix); + +bool process_record_gfx(uint16_t keycode, keyrecord_t *record); diff --git a/keyboards/treadstone48/treadstone48.c b/keyboards/treadstone48/treadstone48.c new file mode 100644 index 0000000000..faadb26906 --- /dev/null +++ b/keyboards/treadstone48/treadstone48.c @@ -0,0 +1 @@ +#include "treadstone48.h" diff --git a/keyboards/treadstone48/treadstone48.h b/keyboards/treadstone48/treadstone48.h new file mode 100644 index 0000000000..3123d1de53 --- /dev/null +++ b/keyboards/treadstone48/treadstone48.h @@ -0,0 +1,15 @@ +#pragma once + +#ifdef KEYBOARD_treadstone48_rev1 + #include "rev1.h" +#endif + +#include "quantum.h" + +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif diff --git a/keyboards/v60_type_r/config.h b/keyboards/v60_type_r/config.h index 703745d564..e3e00a9f80 100644 --- a/keyboards/v60_type_r/config.h +++ b/keyboards/v60_type_r/config.h @@ -1,5 +1,5 @@ /* -Copyright 2017 REPLACE_WITH_YOUR_NAME +Copyright 2017 benlyall, MechMerlin This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -190,5 +189,3 @@ along with this program. If not, see . /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 - -#endif diff --git a/keyboards/v60_type_r/keymaps/default/config.h b/keyboards/v60_type_r/keymaps/default/config.h index 6f235f6ba8..744bea207b 100644 --- a/keyboards/v60_type_r/keymaps/default/config.h +++ b/keyboards/v60_type_r/keymaps/default/config.h @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/v60_type_r/keymaps/default/keymap.c b/keyboards/v60_type_r/keymaps/default/keymap.c index 77546c0a65..831def0789 100644 --- a/keyboards/v60_type_r/keymaps/default/keymap.c +++ b/keyboards/v60_type_r/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/v60_type_r/keymaps/default/readme.md b/keyboards/v60_type_r/keymaps/default/readme.md index 57ac901ada..9b3c6f0643 100644 --- a/keyboards/v60_type_r/keymaps/default/readme.md +++ b/keyboards/v60_type_r/keymaps/default/readme.md @@ -1,5 +1,4 @@ -KB Paradise V60 Type R Default Layout -====================== +# KB Paradise V60 Type R Default Layout This is the default layout as defined by the KBP V60 Type R manual/keycaps @@ -9,4 +8,4 @@ This is the default layout as defined by the KBP V60 Type R manual/keycaps ### Build -To build this keymap, simply run `make KEYMAP=default`. \ No newline at end of file +To build this keymap, simply run `make v60_type_r:default`. diff --git a/keyboards/v60_type_r/keymaps/default/rules.mk b/keyboards/v60_type_r/keymaps/default/rules.mk new file mode 100644 index 0000000000..b6c9a25805 --- /dev/null +++ b/keyboards/v60_type_r/keymaps/default/rules.mk @@ -0,0 +1,2 @@ +BACKLIGHT_ENABLE = no +RGBLIGHT_ENABLE = no diff --git a/keyboards/v60_type_r/keymaps/vimouse/config.h b/keyboards/v60_type_r/keymaps/vimouse/config.h index 3937420d00..285cb4fa23 100644 --- a/keyboards/v60_type_r/keymaps/vimouse/config.h +++ b/keyboards/v60_type_r/keymaps/vimouse/config.h @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,10 +14,7 @@ * along with this program. If not, see . */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" +#pragma once #define V60_POLESTAR @@ -27,5 +24,3 @@ #define MOUSEKEY_TIME_TO_MAX 60 #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 - -#endif diff --git a/keyboards/v60_type_r/keymaps/vimouse/keymap.c b/keyboards/v60_type_r/keymaps/vimouse/keymap.c index 2586683127..8b0019e7ba 100644 --- a/keyboards/v60_type_r/keymaps/vimouse/keymap.c +++ b/keyboards/v60_type_r/keymaps/vimouse/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/v60_type_r/readme.md b/keyboards/v60_type_r/readme.md index 06ff749b86..76cb5f39fc 100644 --- a/keyboards/v60_type_r/readme.md +++ b/keyboards/v60_type_r/readme.md @@ -13,17 +13,6 @@ Please note that other variants of the KBP V60 are not fully programmable. Backlight and RGB Underglow are both supported. -To use the backlight and/or RGB underglow: -* Create a new keymap -* Create a rules.mk file in the keymap -* Add RGBLIGHT_ENABLE = yes and/or BACKLIGHT_ENABLE = yes to the rules.mk -* Setup your keymap to your preference. Use [the `vimouse` keymap](keymaps/vimouse/keymap.c) as a starting point -* Some extra keys are defined to allow you to set the red, green and blue values of the underglow directly, rather than using the HSV spectrum. These are RGB_RI, RGB_RD, RGB_GI, RGB_GD, RGB_BI, RGB_BD for increase and decrease of the red, green and blue channels respectively. - -The provided `default` keymap pretty closely matches the default V60 Type R keymap, minus the backlight and underglow control keys. The `vimouse` keymap is completely customised and makes use of many of the possibilities, including mouse keys, backlighting, RGB underglow, etc. - -Note for those customising: The configuration used in the `vimouse` keymap results in about 93% of the available flash being utilised. Keep that in mind if you're adding functionality. - Note: By default the V60 Type R uses TMK. You should know what you're doing and none of this is guaranteed to work. If you want to stick with the TMK default, then the KB Paradise preferred way of creating the hex file is by using https://tkg.io/, selecting Fantastic60 and then defining your keymap. You will then have to use tkg-toolkit to finish the flashing @@ -40,7 +29,4 @@ or make v60_type_r:vimouse -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - - - +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/v60_type_r/rules.mk b/keyboards/v60_type_r/rules.mk index 7a1340a1ac..54a20a7815 100644 --- a/keyboards/v60_type_r/rules.mk +++ b/keyboards/v60_type_r/rules.mk @@ -52,21 +52,21 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE ?= no # Enable the RGB Underglow -MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 -FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable the RGB Underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches LAYOUTS = 60_ansi diff --git a/keyboards/v60_type_r/v60_type_r.c b/keyboards/v60_type_r/v60_type_r.c index 86d87e12da..41eb75807d 100644 --- a/keyboards/v60_type_r/v60_type_r.c +++ b/keyboards/v60_type_r/v60_type_r.c @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/v60_type_r/v60_type_r.h b/keyboards/v60_type_r/v60_type_r.h index 3d7aef7eaf..25097ed48e 100644 --- a/keyboards/v60_type_r/v60_type_r.h +++ b/keyboards/v60_type_r/v60_type_r.h @@ -1,4 +1,4 @@ -/* Copyright 2017 REPLACE_WITH_YOUR_NAME +/* Copyright 2017 benlyall, MechMerlin * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,8 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef V60_TYPE_R_H -#define V60_TYPE_R_H +#pragma once #include "quantum.h" @@ -106,4 +105,3 @@ enum my_keycodes { { k40, k41, k42, k43, k44, k45, k46, k47 } \ } -#endif diff --git a/keyboards/xd75/keymaps/davidrambo/keymap.c b/keyboards/xd75/keymaps/davidrambo/keymap.c index 442a00afda..7be197a81c 100644 --- a/keyboards/xd75/keymaps/davidrambo/keymap.c +++ b/keyboards/xd75/keymaps/davidrambo/keymap.c @@ -1,51 +1,53 @@ #include QMK_KEYBOARD_H +//aliases for clarity in layering #define A_BSPC LALT(KC_BSPC) // delete whole word in Mac -// #define C_BSPS LCTL(KC_BSPC) // delete whole word in PC; currently not in use +#define C_BSPC LCTL(KC_BSPC) // delete whole word in PC #define A_LEFT LALT(KC_LEFT) #define A_RGHT LALT(KC_RGHT) #define C_RGHT LCTL(KC_RGHT) #define C_LEFT LCTL(KC_LEFT) #define SftEnt SFT_T(KC_ENT) -#define GBSPC LGUI_T(KC_BSPC) -#define CBSPC LCTL_T(KC_BSPC) +#define BS_GUI LGUI_T(KC_BSPC) +#define BS_CTL LCTL_T(KC_BSPC) -//internet browser tab shortcuts and window swapping for Mac and Win +// internet browser tab shortcuts and window/application swapping for Mac and Win #define GSL LGUI(S(KC_LEFT)) // back one tab in Safari #define GSR LGUI(S(KC_RGHT)) // forward one tab in Safari #define CTLPGDN LCTL(KC_PGDN) // back one tab on Windows #define CTLPGUP LCTL(KC_PGUP) // forward one tab on Windows -#define G_TAB LGUI(KC_TAB) // MAC: switch applications -#define G_GRV LGUI(KC_GRV) // MAC: switch between windows within an application +#define G_TAB LGUI(KC_TAB) // Mac: switch applications +#define G_GRV LGUI(KC_GRV) // Mac: switch between windows within an application #define A_TAB LALT(KC_TAB) #define C_TAB LCTL(KC_TAB) -// -#define NAV LT(3, KC_TAB) -#define NAVPC LT(4, KC_TAB) +// navigation layers for both Mac OS X and Windows +#define NAV LT(4, KC_TAB) +#define NAVPC LT(5, KC_TAB) // Layer shorthand #define _COLEMAK 0 #define _PC 1 -#define _SYMBOL 2 //Function keys, numbers, symbols, Backlighting -#define _NAV 3 //Navigation Layer on Mac -#define _NAVPC 4 //Navigation Layer on Win +#define _GAME 2 // Gaming layer +#define _SYMBOL 3 // Function keys, numbers, symbols, Backlighting +#define _NAV 4 // Navigation Layer on Mac +#define _NAVPC 5 // Navigation Layer on Win -//tapdance declarations +// tapdance declarations enum { SFT_LCK }; -//alias for tapdance +// alias for tapdance #define SftLck TD(SFT_LCK) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* COLEMAK * .--------------------------------------------------------------------------------------------------------------------------------------. - * | `~ | 1 | 2 | 3 | 4 | 5 | - | SWITCH | = | 6 | 7 | 8 | 9 | 0 | BACKSP | + * | `~ | 1 | 2 | 3 | 4 | 5 | -_ | PC | =+ | 6 | 7 | 8 | 9 | 0 | BACKSP | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| - * | ESC/`~ | Q | W | F | P | G | [ | \ | ] | J | L | U | Y | ; | BACKSP | + * | ESC/`~ | Q | W | F | P | G | [ | \| | ] | J | L | U | Y | ; | BACKSP | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------| * | NAVTAB | A | S | D | F | G | PgUp |PlayPaus| ENTER | H | N | E | I | O | ' | * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------| @@ -55,24 +57,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * '--------------------------------------------------------------------------------------------------------------------------------------' */ - [_COLEMAK] = { /* COLEMAK */ - { KC_GRV , KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, TG(1) , KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC }, - { KC_GESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_LBRC, KC_BSLS, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, - { NAV , KC_A, KC_R, KC_S, KC_T, KC_D, KC_PGUP, KC_ESC , KC_ENT , KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT }, - { SftLck , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGDN, KC_UP , KC_ENT , KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SftEnt }, - { KC_DEL , KC_LGUI, KC_LCTL, KC_LALT, KC_LGUI, GBSPC, KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC, MO(2) , KC_RGUI, KC_RALT, KC_RCTL, BL_STEP }, - }, + [_COLEMAK] = LAYOUT_ortho_5x15( /* COLEMAK */ + KC_GRV , KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, TG(1) , KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_GESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_LBRC, KC_BSLS, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + NAV , KC_A, KC_R, KC_S, KC_T, KC_D, KC_PGUP, KC_ESC , KC_ENT , KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + SftLck , KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGDN, KC_UP , KC_ENT , KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SftEnt , + KC_DEL , KC_LGUI, KC_LCTL, KC_LALT, KC_LGUI, BS_GUI, KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC, MO(3) , KC_RGUI, KC_RALT, KC_RCTL, BL_STEP + ), // Windows Layer: essentially swaps Control and GUI - [_PC] = { /* WINDOWS */ - { _______, _______, _______, _______, _______, _______, _______, TG(0) , _______, _______, _______, _______, _______, _______, _______ }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, - { NAVPC , _______, _______, _______, _______, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______ }, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, - { _______, KC_LCTL, KC_LGUI, _______, KC_LCTL, _______, _______, _______, _______, _______, _______, KC_RCTL, KC_RALT, KC_RGUI, _______ }, - }, - + [_PC] = LAYOUT_ortho_5x15( /* WINDOWS */ + _______, _______, _______, _______, _______, _______, _______, TG(2) , _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + NAVPC , _______, _______, _______, _______, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_LCTL, KC_LGUI, _______, KC_LCTL, BS_CTL , _______, _______, _______, _______, _______, KC_RCTL, KC_RALT, KC_RGUI, _______ + ), + + [_GAME] = LAYOUT_ortho_5x15( /* Gaming Layer */ + _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_F10 , KC_F11 , KC_F12 , _______, _______, _______, _______, _______, TO(0) , + KC_ESC , KC_T , KC_Q , KC_W , KC_E , KC_R , KC_F7 , KC_F8 , KC_F9 , KC_Y , KC_U , KC_I , KC_O , KC_P , _______, + KC_TAB , KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_F4 , KC_F5 , KC_F6 , KC_H , KC_J , KC_K , KC_L , KC_SCLN, _______, + KC_LALT, KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_F1 , KC_F2 , KC_F3 , KC_N , KC_M , _______, _______, _______, KC_ENT , + _______, _______, _______, KC_G , KC_B , KC_SPC , KC_I , KC_M , _______, _______, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, _______ + ), + /* SYMBOL * .--------------------------------------------------------------------------------------------------------------------------------------. * | F12 | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | @@ -87,30 +97,30 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * '--------------------------------------------------------------------------------------------------------------------------------------' */ - [_SYMBOL] = { /* SYMBOL */ - { _______, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , _______, _______, _______, KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , _______}, - { KC_LBRC, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , _______, _______, _______, KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_RBRC}, - { _______, KC_EXLM, KC_AT , KC_HASH, KC_DLR , KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_EQL }, - { _______, KC_HOME, KC_END , BL_OFF , BL_ON , KC_F11 , _______, _______, _______, KC_F12 , KC_MINS, _______, _______, _______, _______}, - { _______, _______, _______, _______, _______, A_BSPC , _______, _______, _______, _______, _______, _______, _______, _______, _______}, - }, + [_SYMBOL] = LAYOUT_ortho_5x15( /* SYMBOL */ + KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , _______, _______, _______, KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , + KC_LBRC, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , _______, _______, _______, KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_RBRC, + _______, KC_EXLM, KC_AT , KC_HASH, KC_DLR , KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_EQL , + _______, KC_HOME, KC_END , BL_OFF , BL_ON , KC_F11 , _______, _______, _______, KC_F12 , KC_MINS, _______, _______, _______, _______, + _______, _______, _______, _______, _______, A_BSPC , _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), - [_NAV] = { /* NAVIGATION for Mac */ - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, C_TAB , A_LEFT, KC_UP, A_RGHT , KC_DEL , _______}, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, GSL , KC_LEFT, KC_DOWN, KC_RGHT, GSR , _______}, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, G_TAB , ABSPC , KC_HOME, KC_END , G_GRV , _______}, - { RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - }, - - [_NAVPC] = { /* NAVIGATION FOR WINDOWS: replaces Alt with Control, GUI with Alt, and browser tab shortcuts*/ - { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, C_TAB , C_LEFT, KC_UP, C_RGHT , KC_DEL , _______}, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, CTLPGUP, KC_LEFT, KC_DOWN, KC_RGHT, CTLPGDN, _______}, - { _______, _______, _______, _______, _______, _______, _______, _______, _______, A_TAB , CBSPC , KC_HOME, KC_END , _______, _______}, - { RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, - } + [_NAV] = LAYOUT_ortho_5x15( /* NAVIGATION for Mac */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, C_TAB , A_LEFT, KC_UP, A_RGHT , KC_DEL , _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, GSL , KC_LEFT, KC_DOWN, KC_RGHT, GSR , _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, G_TAB , A_BSPC , KC_HOME, KC_END , G_GRV , _______, + RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_NAVPC] = LAYOUT_ortho_5x15( /* NAVIGATION FOR WINDOWS: replaces Alt with Control, GUI with Alt, and browser tab shortcuts*/ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, C_TAB , C_LEFT, KC_UP, C_RGHT , KC_DEL , _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, CTLPGUP, KC_LEFT, KC_DOWN, KC_RGHT, CTLPGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, A_TAB , C_BSPC , KC_HOME, KC_END , _______, _______, + RESET , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) }; // Shift vs capslock function. From bbaserdem's Planck keymap. diff --git a/keyboards/xd75/keymaps/davidrambo/readme.md b/keyboards/xd75/keymaps/davidrambo/readme.md index 17b928c501..a53abc8afc 100644 --- a/keyboards/xd75/keymaps/davidrambo/readme.md +++ b/keyboards/xd75/keymaps/davidrambo/readme.md @@ -1,4 +1,7 @@ -# A Colemak layout for XD75 with both Mac and Windows layers. -# These two layers share momentary toggle access to a "Symbol" layer, which is modeled after my Planck layout. -# Each of the base Colemak layers have their own Navigation layers for the right hand to use arrows and shortcuts for both text editing and web browsing. -# The rules.mk file overrides the XD75's "BACKLIGHT_ENABLE" with YES and also adds tap dance functionality. \ No newline at end of file +# XD75 + +This is a Colemak layout for XD75 with both Mac and Windows layers. +These two layers share momentary toggle access to a "Symbol" layer, which is modeled after my Planck layout (see planck/keymaps/davidrambo). +Each of the base Colemak layers have their own Navigation layers for the right hand to use arrows and shortcuts for both text editing and web browsing. + +The rules.mk file overrides the XD75's "BACKLIGHT_ENABLE" with YES and also adds tap dance functionality. \ No newline at end of file diff --git a/keyboards/zeal60/config.h b/keyboards/zeal60/config.h index e39b06cf6b..a5e41116dc 100644 --- a/keyboards/zeal60/config.h +++ b/keyboards/zeal60/config.h @@ -86,9 +86,19 @@ // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for // alphas vs. mods @@ -100,6 +110,11 @@ #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + #define DYNAMIC_KEYMAP_LAYER_COUNT 4 // EEPROM usage diff --git a/keyboards/zeal60/rgb_backlight.c b/keyboards/zeal60/rgb_backlight.c index a965a13bbd..d5f206fdce 100644 --- a/keyboards/zeal60/rgb_backlight.c +++ b/keyboards/zeal60/rgb_backlight.c @@ -69,15 +69,15 @@ backlight_config g_config = { .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS, .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED, .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT, - .brightness = 255, + .brightness = RGB_BACKLIGHT_BRIGHTNESS, .effect = RGB_BACKLIGHT_EFFECT, - .effect_speed = 0, - .color_1 = { .h = 0, .s = 255 }, - .color_2 = { .h = 127, .s = 255 }, - .caps_lock_indicator = { .color = { .h = 0, .s = 0 }, .index = 255 }, - .layer_1_indicator = { .color = { .h = 0, .s = 0 }, .index = 255 }, - .layer_2_indicator = { .color = { .h = 0, .s = 0 }, .index = 255 }, - .layer_3_indicator = { .color = { .h = 0, .s = 0 }, .index = 255 }, + .effect_speed = RGB_BACKLIGHT_EFFECT_SPEED, + .color_1 = RGB_BACKLIGHT_COLOR_1, + .color_2 = RGB_BACKLIGHT_COLOR_2, + .caps_lock_indicator = RGB_BACKLIGHT_CAPS_LOCK_INDICATOR, + .layer_1_indicator = RGB_BACKLIGHT_LAYER_1_INDICATOR, + .layer_2_indicator = RGB_BACKLIGHT_LAYER_2_INDICATOR, + .layer_3_indicator = RGB_BACKLIGHT_LAYER_3_INDICATOR, .alphas_mods = { RGB_BACKLIGHT_ALPHAS_MODS_ROW_0, RGB_BACKLIGHT_ALPHAS_MODS_ROW_1, diff --git a/keyboards/zeal65/config.h b/keyboards/zeal65/config.h index 7406be865b..224fce1f65 100644 --- a/keyboards/zeal65/config.h +++ b/keyboards/zeal65/config.h @@ -86,9 +86,19 @@ // disable backlight after timeout in minutes, 0 = no timeout #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + // the default effect (RGB test) #define RGB_BACKLIGHT_EFFECT 255 +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + // These define which keys in the matrix are alphas/mods // Used for backlight effects so colors are different for // alphas vs. mods @@ -100,6 +110,11 @@ #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0111000000000001 #define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0111110000000011 +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + #define DYNAMIC_KEYMAP_LAYER_COUNT 4 // EEPROM usage diff --git a/layouts/community/ergodox/bepo_alt/keymap.c b/layouts/community/ergodox/bepo_alt/keymap.c new file mode 100644 index 0000000000..fc40afd871 --- /dev/null +++ b/layouts/community/ergodox/bepo_alt/keymap.c @@ -0,0 +1,127 @@ +/* Bepo layout for ergodox EZ by Nicolas CARPi (deltablot.com) */ +#include QMK_KEYBOARD_H +#include "keymap_bepo.h" +#include "keymap_french.h" + +#define BEPO 0 // default layer, for bepo compatible systems +#define FNAV 1 // function / navigation / mouse layer + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: default layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | $ | " | < | > | ( | ) | @ | | + | - | - | / | * | = | % | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | TAB | B |E_ACUT| P | O |E_GRAV|Backsp| |CapsLo| ^ | V | D | L | J | Z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | W | A | U | I | E | , |------| |------| C | T | S | R | N | M | + * |--------+------+------+------+------+------| | | ESCAP------+------+------+------+------+--------| + * | SHIFT |E_CIRC | A_GRAV | Y | X | . | K | | | ' | Q | G | H | F | C_CEDIL| + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * |Ctrl|LSuper|LSuper| LSuper| LAlt| | PgUp | PgDwn| |BEPO| Delete | | AltGr| RSuper|RSuper|RCtrl| Enter| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | |Insert| |L_Fnav| | | + * | Space|Shift |------| |------|RShift|Enter | + * | | |Mouse | | Fn | | | + * `--------------------' `--------------------' + * df is for temporary stuff and mo is for toggle (momentary) + * so mouse is to toggle the mouse mode + */ +[BEPO] = LAYOUT_ergodox( + +/* Left hand */ +BP_DOLLAR, BP_DQOT, BP_LGIL, BP_RGIL, BP_LPRN, BP_RPRN, BP_AT, +KC_TAB, BP_B, BP_E_ACUTE, BP_P, BP_O, BP_E_GRAVE, KC_BSPC, +BP_W, BP_A, BP_U, BP_I, BP_E, BP_COMMA, +KC_LSHIFT, BP_ECRC, BP_A_GRAVE, BP_Y, BP_X, BP_DOT, BP_K, +KC_LCTL, KC_LGUI, KC_LGUI, KC_LGUI, KC_LALT, + KC_PGUP, KC_PGDOWN, + KC_INS, + KC_SPC, KC_LSHIFT, DF(FNAV), + +/* Right hand */ + BP_PLUS, BP_MINUS, BP_MINUS, BP_SLASH, BP_ASTR, BP_EQUAL, BP_PERCENT, + KC_CAPSLOCK, BP_DCRC, BP_V, BP_D, BP_L, BP_J, BP_Z, + BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, + KC_ESC, BP_APOS, BP_Q, BP_G, BP_H, BP_F, BP_CCED, + KC_ALGR, KC_RGUI, KC_RGUI, KC_RCTL, KC_ENTER, +DF(BEPO), KC_DEL, +DF(FNAV), +MO(FNAV), KC_RSHIFT, KC_ENTER), + +/* Keymap 1: function / navigation / mouse layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | F12 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | Next |LClick| Up |RClick| WhUp |Backspace| | | PgUp | Home | Up | End | F11 | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Prev | Left | Down | Right|WhDown|------| |------| Left | Down | Up | Right | F12 | | + * |--------+------+------+------+------+------| VolUp| | |------+------+------+------+------+--------| + * | Shift | Undo | Cut | Copy | Paste| | | | | | | | | | | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * | ctrl | super | super | alt | | Home | End | | | | | | Alt | | |Ctrl | | + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[FNAV] = LAYOUT_ergodox( + +/* Left hand */ +KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, +KC_NO, KC_MS_BTN5, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_MS_WH_UP, KC_BSPC, +KC_NO, KC_MS_BTN4, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_WH_DOWN, +KC_LSHIFT, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_NO, KC_VOLD, +KC_LCTL, KC_INS, KC_LGUI, KC_LGUI, KC_LALT, + KC_HOME, KC_END, + KC_TRNS, + KC_NO, KC_TRNS, KC_TRNS, + +/* Right hand */ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F12, + KC_NO, KC_PGUP, KC_HOME, KC_UP, KC_END, KC_F11, KC_NO, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_F12, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_RALT, KC_TRNS, KC_TRNS, KC_RCTL, KC_NO, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, KC_TRNS, KC_NO), +}; + +/* helper function to switch on of the right LED ON/OFF */ +static void indicate_using_led(const uint8_t led, const bool enabled) { + if (enabled) { + ergodox_right_led_on(led); + } else { + ergodox_right_led_off(led); + } +} + +/* Runs constantly in the background, in a loop */ +void matrix_scan_user(void) { + + /* red led for shift */ + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || + ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { + indicate_using_led(1, true); + } else { + indicate_using_led(1, false); + } + + /* green led for alt */ + if (keyboard_report->mods & MOD_BIT(KC_LALT) || + ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) { + indicate_using_led(2, true); + } else { + indicate_using_led(2, false); + } + + /* blue led for function mode */ + if (IS_LAYER_ON(FNAV)) { + indicate_using_led(3, true); + } else { + indicate_using_led(3, false); + } +}; diff --git a/layouts/community/ergodox/bepo_alt/readme.md b/layouts/community/ergodox/bepo_alt/readme.md new file mode 100644 index 0000000000..c8cc1225cc --- /dev/null +++ b/layouts/community/ergodox/bepo_alt/readme.md @@ -0,0 +1,66 @@ +![layer0](https://i.imgur.com/vd4QLBf.png) + +![layer1](https://i.imgur.com/eo101eD.png) + +# BEPO keymap for the ErgoDox (alternate version) + +This keymap has been made for the BEPO layout (https://bepo.fr), which is an ergonomic french keyboard layout based on Dvorak rules. As it's made for french people, the following of this readme will be in french. + +Keyboard Maintainer: [Nicolas CARPi](https://github.com/NicolasCARPi) + +Hardware Supported: Ergodox EZ + +## Disposition BÉPO pour l'ErgoDox + +Cette keymap a été adaptée de la keymap "bepo_csa" présente dans le dossier parent. + +Certaines modifications ont été apportées pour ressembler un peu plus à une clavier traditionel: + +* entrée sur la touche tout en bas à droite (comme la touche entrée du pavé numérique sur un clavier traditionnel) +* plusieurs touches "Super" pour faciliter son accès + +Il y a deux layers, celui de base, et celui avec les flèches, les touches fonction et la souris (main gauche). + +## Particularités + +* Touches de repos des pouces : "espace" à gauche et "entrée" à droite. +* Touche Ctrl gauche accessible avec la paume de la main. +* Touche "w" placée sur la main gauche (j'ai toujours trouvé le "w" difficle d'accès sur un clavier bépo classique. +* Plusieurs touches F12. +* Les flèches sont disposées avec un déplacement à la VIM. +* Un mode souris permet d'utiliser la souris avec le clavier. +* Possibilité de changer de mode de manière temporaire ou permanente. +* Les leds s'allument avec SHIFT, ALT ou la touche function. + +J'ai fait cette disposition pour mes besoins, à vous de la modifier pour les vôtres ;) + +## Utilisation + +### Pré-requis + +Pour Archlinux, il est nécessaire d'installer ces paquets au préalable: + +~~~bash +sudo pacman -S avr-gcc avr-libc teensy-loader-cli +~~~ + +Les paquets "avr" permettent de compiler le firmware, et teensy-loader permet de le charger sur le clavier. + +### Compilation + +~~~bash +# clone the repo +git clone https://github.com/qmk/qmk_firmware +# install submodules +make git-submodule +# compile this layout +make ergodox_ez:bepo_alt +~~~ + +### Chargement + +~~~bash +teensy-loader-cli -w -mmcu=atmega32u4 -v ergodox_ez_bepo_alt.hex && sleep 6 && setxkbmap fr bepo +~~~ + +J'ai ajouté un sleep avant la commande pour remettre en bépo afin de laisser au clavier le temps de rebooter. diff --git a/layouts/community/ergodox/bepo_alt/rules.mk b/layouts/community/ergodox/bepo_alt/rules.mk new file mode 100644 index 0000000000..faca18b543 --- /dev/null +++ b/layouts/community/ergodox/bepo_alt/rules.mk @@ -0,0 +1,5 @@ +# Having a file like this allows you to override Makefile definitions +# for your own particular keymap + +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/layouts/community/ergodox/drashna_glow/config.h b/layouts/community/ergodox/drashna_glow/config.h index cdca5ba4b5..a10c4bb297 100644 --- a/layouts/community/ergodox/drashna_glow/config.h +++ b/layouts/community/ergodox/drashna_glow/config.h @@ -13,7 +13,6 @@ // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED true// turn off effects when suspended -// #define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) if not defined defaults to 1 // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 // #define EECONFIG_RGB_MATRIX (uint32_t *)16 #endif diff --git a/layouts/community/ergodox/dvorak_spanish/readme.md b/layouts/community/ergodox/dvorak_spanish/readme.md index e075e3cd7d..1256c6887d 100644 --- a/layouts/community/ergodox/dvorak_spanish/readme.md +++ b/layouts/community/ergodox/dvorak_spanish/readme.md @@ -1,5 +1,4 @@ # Ergodox Spanish Dvorak Layout - * See spanish dvorak layout [here](http://djelibeibi.unex.es/dvorak/) * Software layout must be set to SPANISH QWERTY to work properly ## Keymap Layers diff --git a/layouts/community/ergodox/osx_de/readme.md b/layouts/community/ergodox/osx_de/readme.md index 5011a9dd62..e4ccee3aa6 100644 --- a/layouts/community/ergodox/osx_de/readme.md +++ b/layouts/community/ergodox/osx_de/readme.md @@ -1,4 +1,4 @@ -#Ergodox EZ für OSX +# Ergodox EZ für OSX Dies ist nur ein kleiner Tweak der bestehenden firmware für das ErgoDox-EZ-Keyboard. Leider passte das layout nicht wirklich für OSX, deswegen habe ich einige Anpassungen gemacht. Dabei wurden folgende features umgesetzt: @@ -14,7 +14,6 @@ Dies ist nur ein kleiner Tweak der bestehenden firmware für das ErgoDox-EZ-Keyb # Erstellt Mit Dem ErgodoxLayoutGenerator Der ErgodoxLayoutGenerator ist ein kleines Werkzeug, welches die Erstellung und Pflege der eigenen Keymaps erleichtern soll. Es ist in java geschrieben und kann [hier](https://github.com/sboesebeck/ErgodoxLayoutGenerator/releases) heruntergeladen werden. Damit das Tool funktioniert sollte das offizielle Oracle JDK in aktueller Version installiert sein. -Die Dokumentation für den ELG kann man [hier](https://boesebeck.name/2016/04/16/ergodoxlayoutgenerator-documentation/) nachlesen (momentan leider nur in Englisch verfügbar). diff --git a/layouts/community/ergodox/osx_de_experimental/readme.md b/layouts/community/ergodox/osx_de_experimental/readme.md index e6a1018416..dde28eee41 100644 --- a/layouts/community/ergodox/osx_de_experimental/readme.md +++ b/layouts/community/ergodox/osx_de_experimental/readme.md @@ -8,7 +8,6 @@ dieses layout ist experimentell und wird im Lufe der Zeit viele Änderungen und # Erstellt Mit Dem ErgodoxLayoutGenerator Der ErgodoxLayoutGenerator (ELG) ist ein kleines Werkzeug, welches die Erstellung und Pflege der eigenen Keymaps erleichtern soll. Es ist in java geschrieben und kann [hier](https://github.com/sboesebeck/ErgodoxLayoutGenerator/releases) heruntergeladen werden. Damit das Tool funktioniert sollte das offizielle Oracle JDK in aktueller Version installiert sein. -Die Dokumentation für den ELG kann man [hier](https://boesebeck.name/2016/04/16/ergodoxlayoutgenerator-documentation/) nachlesen (momentan leider nur in Englisch verfügbar). --------------------------------------------------------------------------------------------------------------------- # Ergodox and Ergodox-EZ experimental layout diff --git a/layouts/community/ergodox/teckinesis/readme.md b/layouts/community/ergodox/teckinesis/readme.md index 6804bb06f6..d9b22742c9 100644 --- a/layouts/community/ergodox/teckinesis/readme.md +++ b/layouts/community/ergodox/teckinesis/readme.md @@ -1,6 +1,6 @@ # teckinesis Layout -*A blend of TECK and Kinesis layouts, based on ["The Ordinary Layout" by Nicholas Keene](http://qmk.fm/keyboards/ergodox_ez/keymaps/ordinary/#the-ordinary-layout-a-familiar-and-powerful-layout)* +*A blend of TECK and Kinesis layouts, based on ["The Ordinary Layout" by Nicholas Keene](/layouts/community/ergodox/ordinary)* I love "The Ordinary Layout", but I still use a [TECK](https://www.trulyergonomic.com/store/index.php) at the office, and I found the transition back and forth to be a bit more difficult than I expected. diff --git a/layouts/community/ergodox/tm2030/readme.md b/layouts/community/ergodox/tm2030/readme.md index 23746ddb76..fce0c46e7d 100644 --- a/layouts/community/ergodox/tm2030/readme.md +++ b/layouts/community/ergodox/tm2030/readme.md @@ -55,7 +55,7 @@ As on the original TM 2030, when `num` layer is activated, holding `fn` disables ## Dvorak Layer Same as Layer 0 but with _Dvorak_ layout, to use with QWERTY OS layout. -Enable Dvorak layout with [`Magic`](/TMK_readme.md#magic-commands)+`1` (`LShift`+`RShift`+`1`), disable with `Magic`-`0`. +Enable Dvorak layout with [`Magic`](/docs/feature_bootmagic.md)+`1` (`LShift`+`RShift`+`1`), disable with `Magic`-`0`. The middle (green) led indicates when the Dvorak layer is activated. diff --git a/layouts/community/ortho_4x12/drashna/config.h b/layouts/community/ortho_4x12/drashna/config.h index f648d11279..1858ee3a4f 100644 --- a/layouts/community/ortho_4x12/drashna/config.h +++ b/layouts/community/ortho_4x12/drashna/config.h @@ -18,7 +18,6 @@ // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED true// turn off effects when suspended -// #define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) if not defined defaults to 1 // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define EECONFIG_RGB_MATRIX (uint32_t *)15 #endif diff --git a/lib/lib8tion/LICENSE b/lib/lib8tion/LICENSE new file mode 100644 index 0000000000..ebe476330b --- /dev/null +++ b/lib/lib8tion/LICENSE @@ -0,0 +1,20 @@ +The MIT License (MIT) + +Copyright (c) 2013 FastLED + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +the Software, and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS +FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR +COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. diff --git a/lib/lib8tion/lib8tion.c b/lib/lib8tion/lib8tion.c new file mode 100644 index 0000000000..84b3e9c61c --- /dev/null +++ b/lib/lib8tion/lib8tion.c @@ -0,0 +1,242 @@ +#define FASTLED_INTERNAL +#include + +#define RAND16_SEED 1337 +uint16_t rand16seed = RAND16_SEED; + + +// memset8, memcpy8, memmove8: +// optimized avr replacements for the standard "C" library +// routines memset, memcpy, and memmove. +// +// There are two techniques that make these routines +// faster than the standard avr-libc routines. +// First, the loops are unrolled 2X, meaning that +// the average loop overhead is cut in half. +// And second, the compare-and-branch at the bottom +// of each loop decrements the low byte of the +// counter, and if the carry is clear, it branches +// back up immediately. Only if the low byte math +// causes carry do we bother to decrement the high +// byte and check that result for carry as well. +// Results for a 100-byte buffer are 20-40% faster +// than standard avr-libc, at a cost of a few extra +// bytes of code. + +#if defined(__AVR__) +//__attribute__ ((noinline)) +void * memset8 ( void * ptr, uint8_t val, uint16_t num ) +{ + asm volatile( + " movw r26, %[ptr] \n\t" + " sbrs %A[num], 0 \n\t" + " rjmp Lseteven_%= \n\t" + " rjmp Lsetodd_%= \n\t" + "Lsetloop_%=: \n\t" + " st X+, %[val] \n\t" + "Lsetodd_%=: \n\t" + " st X+, %[val] \n\t" + "Lseteven_%=: \n\t" + " subi %A[num], 2 \n\t" + " brcc Lsetloop_%= \n\t" + " sbci %B[num], 0 \n\t" + " brcc Lsetloop_%= \n\t" + : [num] "+r" (num) + : [ptr] "r" (ptr), + [val] "r" (val) + : "memory" + ); + return ptr; +} + + + +//__attribute__ ((noinline)) +void * memcpy8 ( void * dst, const void* src, uint16_t num ) +{ + asm volatile( + " movw r30, %[src] \n\t" + " movw r26, %[dst] \n\t" + " sbrs %A[num], 0 \n\t" + " rjmp Lcpyeven_%= \n\t" + " rjmp Lcpyodd_%= \n\t" + "Lcpyloop_%=: \n\t" + " ld __tmp_reg__, Z+ \n\t" + " st X+, __tmp_reg__ \n\t" + "Lcpyodd_%=: \n\t" + " ld __tmp_reg__, Z+ \n\t" + " st X+, __tmp_reg__ \n\t" + "Lcpyeven_%=: \n\t" + " subi %A[num], 2 \n\t" + " brcc Lcpyloop_%= \n\t" + " sbci %B[num], 0 \n\t" + " brcc Lcpyloop_%= \n\t" + : [num] "+r" (num) + : [src] "r" (src), + [dst] "r" (dst) + : "memory" + ); + return dst; +} + +//__attribute__ ((noinline)) +void * memmove8 ( void * dst, const void* src, uint16_t num ) +{ + if( src > dst) { + // if src > dst then we can use the forward-stepping memcpy8 + return memcpy8( dst, src, num); + } else { + // if src < dst then we have to step backward: + dst = (char*)dst + num; + src = (char*)src + num; + asm volatile( + " movw r30, %[src] \n\t" + " movw r26, %[dst] \n\t" + " sbrs %A[num], 0 \n\t" + " rjmp Lmoveven_%= \n\t" + " rjmp Lmovodd_%= \n\t" + "Lmovloop_%=: \n\t" + " ld __tmp_reg__, -Z \n\t" + " st -X, __tmp_reg__ \n\t" + "Lmovodd_%=: \n\t" + " ld __tmp_reg__, -Z \n\t" + " st -X, __tmp_reg__ \n\t" + "Lmoveven_%=: \n\t" + " subi %A[num], 2 \n\t" + " brcc Lmovloop_%= \n\t" + " sbci %B[num], 0 \n\t" + " brcc Lmovloop_%= \n\t" + : [num] "+r" (num) + : [src] "r" (src), + [dst] "r" (dst) + : "memory" + ); + return dst; + } +} + +#endif /* AVR */ + + + + +#if 0 +// TEST / VERIFICATION CODE ONLY BELOW THIS POINT +#include +#include "lib8tion.h" + +void test1abs( int8_t i) +{ + Serial.print("abs("); Serial.print(i); Serial.print(") = "); + int8_t j = abs8(i); + Serial.print(j); Serial.println(" "); +} + +void testabs() +{ + delay(5000); + for( int8_t q = -128; q != 127; q++) { + test1abs(q); + } + for(;;){}; +} + + +void testmul8() +{ + delay(5000); + byte r, c; + + Serial.println("mul8:"); + for( r = 0; r <= 20; r += 1) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 20; c += 1) { + byte t; + t = mul8( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + Serial.println("done."); + for(;;){}; +} + + +void testscale8() +{ + delay(5000); + byte r, c; + + Serial.println("scale8:"); + for( r = 0; r <= 240; r += 10) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 240; c += 10) { + byte t; + t = scale8( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + + Serial.println(' '); + Serial.println("scale8_video:"); + + for( r = 0; r <= 100; r += 4) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 100; c += 4) { + byte t; + t = scale8_video( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + + Serial.println("done."); + for(;;){}; +} + + + +void testqadd8() +{ + delay(5000); + byte r, c; + for( r = 0; r <= 240; r += 10) { + Serial.print(r); Serial.print(" : "); + for( c = 0; c <= 240; c += 10) { + byte t; + t = qadd8( r, c); + Serial.print(t); Serial.print(' '); + } + Serial.println(' '); + } + Serial.println("done."); + for(;;){}; +} + +void testnscale8x3() +{ + delay(5000); + byte r, g, b, sc; + for( byte z = 0; z < 10; z++) { + r = random8(); g = random8(); b = random8(); sc = random8(); + + Serial.print("nscale8x3_video( "); + Serial.print(r); Serial.print(", "); + Serial.print(g); Serial.print(", "); + Serial.print(b); Serial.print(", "); + Serial.print(sc); Serial.print(") = [ "); + + nscale8x3_video( r, g, b, sc); + + Serial.print(r); Serial.print(", "); + Serial.print(g); Serial.print(", "); + Serial.print(b); Serial.print("]"); + + Serial.println(' '); + } + Serial.println("done."); + for(;;){}; +} + +#endif diff --git a/lib/lib8tion/lib8tion.h b/lib/lib8tion/lib8tion.h new file mode 100644 index 0000000000..d93c748e6a --- /dev/null +++ b/lib/lib8tion/lib8tion.h @@ -0,0 +1,934 @@ +#ifndef __INC_LIB8TION_H +#define __INC_LIB8TION_H + +/* + + Fast, efficient 8-bit math functions specifically + designed for high-performance LED programming. + + Because of the AVR(Arduino) and ARM assembly language + implementations provided, using these functions often + results in smaller and faster code than the equivalent + program using plain "C" arithmetic and logic. + + + Included are: + + + - Saturating unsigned 8-bit add and subtract. + Instead of wrapping around if an overflow occurs, + these routines just 'clamp' the output at a maxumum + of 255, or a minimum of 0. Useful for adding pixel + values. E.g., qadd8( 200, 100) = 255. + + qadd8( i, j) == MIN( (i + j), 0xFF ) + qsub8( i, j) == MAX( (i - j), 0 ) + + - Saturating signed 8-bit ("7-bit") add. + qadd7( i, j) == MIN( (i + j), 0x7F) + + + - Scaling (down) of unsigned 8- and 16- bit values. + Scaledown value is specified in 1/256ths. + scale8( i, sc) == (i * sc) / 256 + scale16by8( i, sc) == (i * sc) / 256 + + Example: scaling a 0-255 value down into a + range from 0-99: + downscaled = scale8( originalnumber, 100); + + A special version of scale8 is provided for scaling + LED brightness values, to make sure that they don't + accidentally scale down to total black at low + dimming levels, since that would look wrong: + scale8_video( i, sc) = ((i * sc) / 256) +? 1 + + Example: reducing an LED brightness by a + dimming factor: + new_bright = scale8_video( orig_bright, dimming); + + + - Fast 8- and 16- bit unsigned random numbers. + Significantly faster than Arduino random(), but + also somewhat less random. You can add entropy. + random8() == random from 0..255 + random8( n) == random from 0..(N-1) + random8( n, m) == random from N..(M-1) + + random16() == random from 0..65535 + random16( n) == random from 0..(N-1) + random16( n, m) == random from N..(M-1) + + random16_set_seed( k) == seed = k + random16_add_entropy( k) == seed += k + + + - Absolute value of a signed 8-bit value. + abs8( i) == abs( i) + + + - 8-bit math operations which return 8-bit values. + These are provided mostly for completeness, + not particularly for performance. + mul8( i, j) == (i * j) & 0xFF + add8( i, j) == (i + j) & 0xFF + sub8( i, j) == (i - j) & 0xFF + + + - Fast 16-bit approximations of sin and cos. + Input angle is a uint16_t from 0-65535. + Output is a signed int16_t from -32767 to 32767. + sin16( x) == sin( (x/32768.0) * pi) * 32767 + cos16( x) == cos( (x/32768.0) * pi) * 32767 + Accurate to more than 99% in all cases. + + - Fast 8-bit approximations of sin and cos. + Input angle is a uint8_t from 0-255. + Output is an UNsigned uint8_t from 0 to 255. + sin8( x) == (sin( (x/128.0) * pi) * 128) + 128 + cos8( x) == (cos( (x/128.0) * pi) * 128) + 128 + Accurate to within about 2%. + + + - Fast 8-bit "easing in/out" function. + ease8InOutCubic(x) == 3(x^i) - 2(x^3) + ease8InOutApprox(x) == + faster, rougher, approximation of cubic easing + ease8InOutQuad(x) == quadratic (vs cubic) easing + + - Cubic, Quadratic, and Triangle wave functions. + Input is a uint8_t representing phase withing the wave, + similar to how sin8 takes an angle 'theta'. + Output is a uint8_t representing the amplitude of + the wave at that point. + cubicwave8( x) + quadwave8( x) + triwave8( x) + + - Square root for 16-bit integers. About three times + faster and five times smaller than Arduino's built-in + generic 32-bit sqrt routine. + sqrt16( uint16_t x ) == sqrt( x) + + - Dimming and brightening functions for 8-bit + light values. + dim8_video( x) == scale8_video( x, x) + dim8_raw( x) == scale8( x, x) + dim8_lin( x) == (x<128) ? ((x+1)/2) : scale8(x,x) + brighten8_video( x) == 255 - dim8_video( 255 - x) + brighten8_raw( x) == 255 - dim8_raw( 255 - x) + brighten8_lin( x) == 255 - dim8_lin( 255 - x) + The dimming functions in particular are suitable + for making LED light output appear more 'linear'. + + + - Linear interpolation between two values, with the + fraction between them expressed as an 8- or 16-bit + fixed point fraction (fract8 or fract16). + lerp8by8( fromU8, toU8, fract8 ) + lerp16by8( fromU16, toU16, fract8 ) + lerp15by8( fromS16, toS16, fract8 ) + == from + (( to - from ) * fract8) / 256) + lerp16by16( fromU16, toU16, fract16 ) + == from + (( to - from ) * fract16) / 65536) + map8( in, rangeStart, rangeEnd) + == map( in, 0, 255, rangeStart, rangeEnd); + + - Optimized memmove, memcpy, and memset, that are + faster than standard avr-libc 1.8. + memmove8( dest, src, bytecount) + memcpy8( dest, src, bytecount) + memset8( buf, value, bytecount) + + - Beat generators which return sine or sawtooth + waves in a specified number of Beats Per Minute. + Sine wave beat generators can specify a low and + high range for the output. Sawtooth wave beat + generators always range 0-255 or 0-65535. + beatsin8( BPM, low8, high8) + = (sine(beatphase) * (high8-low8)) + low8 + beatsin16( BPM, low16, high16) + = (sine(beatphase) * (high16-low16)) + low16 + beatsin88( BPM88, low16, high16) + = (sine(beatphase) * (high16-low16)) + low16 + beat8( BPM) = 8-bit repeating sawtooth wave + beat16( BPM) = 16-bit repeating sawtooth wave + beat88( BPM88) = 16-bit repeating sawtooth wave + BPM is beats per minute in either simple form + e.g. 120, or Q8.8 fixed-point form. + BPM88 is beats per minute in ONLY Q8.8 fixed-point + form. + +Lib8tion is pronounced like 'libation': lie-BAY-shun + +*/ + + + +#include + +#define LIB8STATIC __attribute__ ((unused)) static inline +#define LIB8STATIC_ALWAYS_INLINE __attribute__ ((always_inline)) static inline + +#if !defined(__AVR__) +#include +// for memmove, memcpy, and memset if not defined here +#endif + +#if defined(__arm__) + +#if defined(FASTLED_TEENSY3) +// Can use Cortex M4 DSP instructions +#define QADD8_C 0 +#define QADD7_C 0 +#define QADD8_ARM_DSP_ASM 1 +#define QADD7_ARM_DSP_ASM 1 +#else +// Generic ARM +#define QADD8_C 1 +#define QADD7_C 1 +#endif + +#define QSUB8_C 1 +#define SCALE8_C 1 +#define SCALE16BY8_C 1 +#define SCALE16_C 1 +#define ABS8_C 1 +#define MUL8_C 1 +#define QMUL8_C 1 +#define ADD8_C 1 +#define SUB8_C 1 +#define EASE8_C 1 +#define AVG8_C 1 +#define AVG7_C 1 +#define AVG16_C 1 +#define AVG15_C 1 +#define BLEND8_C 1 + + +#elif defined(__AVR__) + +// AVR ATmega and friends Arduino + +#define QADD8_C 0 +#define QADD7_C 0 +#define QSUB8_C 0 +#define ABS8_C 0 +#define ADD8_C 0 +#define SUB8_C 0 +#define AVG8_C 0 +#define AVG7_C 0 +#define AVG16_C 0 +#define AVG15_C 0 + +#define QADD8_AVRASM 1 +#define QADD7_AVRASM 1 +#define QSUB8_AVRASM 1 +#define ABS8_AVRASM 1 +#define ADD8_AVRASM 1 +#define SUB8_AVRASM 1 +#define AVG8_AVRASM 1 +#define AVG7_AVRASM 1 +#define AVG16_AVRASM 1 +#define AVG15_AVRASM 1 + +// Note: these require hardware MUL instruction +// -- sorry, ATtiny! +#if !defined(LIB8_ATTINY) +#define SCALE8_C 0 +#define SCALE16BY8_C 0 +#define SCALE16_C 0 +#define MUL8_C 0 +#define QMUL8_C 0 +#define EASE8_C 0 +#define BLEND8_C 0 +#define SCALE8_AVRASM 1 +#define SCALE16BY8_AVRASM 1 +#define SCALE16_AVRASM 1 +#define MUL8_AVRASM 1 +#define QMUL8_AVRASM 1 +#define EASE8_AVRASM 1 +#define CLEANUP_R1_AVRASM 1 +#define BLEND8_AVRASM 1 +#else +// On ATtiny, we just use C implementations +#define SCALE8_C 1 +#define SCALE16BY8_C 1 +#define SCALE16_C 1 +#define MUL8_C 1 +#define QMUL8_C 1 +#define EASE8_C 1 +#define BLEND8_C 1 +#define SCALE8_AVRASM 0 +#define SCALE16BY8_AVRASM 0 +#define SCALE16_AVRASM 0 +#define MUL8_AVRASM 0 +#define QMUL8_AVRASM 0 +#define EASE8_AVRASM 0 +#define BLEND8_AVRASM 0 +#endif + +#else + +// unspecified architecture, so +// no ASM, everything in C +#define QADD8_C 1 +#define QADD7_C 1 +#define QSUB8_C 1 +#define SCALE8_C 1 +#define SCALE16BY8_C 1 +#define SCALE16_C 1 +#define ABS8_C 1 +#define MUL8_C 1 +#define QMUL8_C 1 +#define ADD8_C 1 +#define SUB8_C 1 +#define EASE8_C 1 +#define AVG8_C 1 +#define AVG7_C 1 +#define AVG16_C 1 +#define AVG15_C 1 +#define BLEND8_C 1 + +#endif + +///@defgroup lib8tion Fast math functions +///A variety of functions for working with numbers. +///@{ + + +/////////////////////////////////////////////////////////////////////// +// +// typdefs for fixed-point fractional types. +// +// sfract7 should be interpreted as signed 128ths. +// fract8 should be interpreted as unsigned 256ths. +// sfract15 should be interpreted as signed 32768ths. +// fract16 should be interpreted as unsigned 65536ths. +// +// Example: if a fract8 has the value "64", that should be interpreted +// as 64/256ths, or one-quarter. +// +// +// fract8 range is 0 to 0.99609375 +// in steps of 0.00390625 +// +// sfract7 range is -0.9921875 to 0.9921875 +// in steps of 0.0078125 +// +// fract16 range is 0 to 0.99998474121 +// in steps of 0.00001525878 +// +// sfract15 range is -0.99996948242 to 0.99996948242 +// in steps of 0.00003051757 +// + +/// ANSI unsigned short _Fract. range is 0 to 0.99609375 +/// in steps of 0.00390625 +typedef uint8_t fract8; ///< ANSI: unsigned short _Fract + +/// ANSI: signed short _Fract. range is -0.9921875 to 0.9921875 +/// in steps of 0.0078125 +typedef int8_t sfract7; ///< ANSI: signed short _Fract + +/// ANSI: unsigned _Fract. range is 0 to 0.99998474121 +/// in steps of 0.00001525878 +typedef uint16_t fract16; ///< ANSI: unsigned _Fract + +/// ANSI: signed _Fract. range is -0.99996948242 to 0.99996948242 +/// in steps of 0.00003051757 +typedef int16_t sfract15; ///< ANSI: signed _Fract + + +// accumXY types should be interpreted as X bits of integer, +// and Y bits of fraction. +// E.g., accum88 has 8 bits of int, 8 bits of fraction + +typedef uint16_t accum88; ///< ANSI: unsigned short _Accum. 8 bits int, 8 bits fraction +typedef int16_t saccum78; ///< ANSI: signed short _Accum. 7 bits int, 8 bits fraction +typedef uint32_t accum1616;///< ANSI: signed _Accum. 16 bits int, 16 bits fraction +typedef int32_t saccum1516;///< ANSI: signed _Accum. 15 bits int, 16 bits fraction +typedef uint16_t accum124; ///< no direct ANSI counterpart. 12 bits int, 4 bits fraction +typedef int32_t saccum114;///< no direct ANSI counterpart. 1 bit int, 14 bits fraction + + + +#include "math8.h" +#include "scale8.h" +#include "random8.h" +#include "trig8.h" + +/////////////////////////////////////////////////////////////////////// + + + + + + + +/////////////////////////////////////////////////////////////////////// +// +// float-to-fixed and fixed-to-float conversions +// +// Note that anything involving a 'float' on AVR will be slower. + +/// sfract15ToFloat: conversion from sfract15 fixed point to +/// IEEE754 32-bit float. +LIB8STATIC float sfract15ToFloat( sfract15 y) +{ + return y / 32768.0; +} + +/// conversion from IEEE754 float in the range (-1,1) +/// to 16-bit fixed point. Note that the extremes of +/// one and negative one are NOT representable. The +/// representable range is basically +LIB8STATIC sfract15 floatToSfract15( float f) +{ + return f * 32768.0; +} + + + +/////////////////////////////////////////////////////////////////////// +// +// memmove8, memcpy8, and memset8: +// alternatives to memmove, memcpy, and memset that are +// faster on AVR than standard avr-libc 1.8 + +#if defined(__AVR__) +void * memmove8( void * dst, const void * src, uint16_t num ); +void * memcpy8 ( void * dst, const void * src, uint16_t num ) __attribute__ ((noinline)); +void * memset8 ( void * ptr, uint8_t value, uint16_t num ) __attribute__ ((noinline)) ; +#else +// on non-AVR platforms, these names just call standard libc. +#define memmove8 memmove +#define memcpy8 memcpy +#define memset8 memset +#endif + + +/////////////////////////////////////////////////////////////////////// +// +// linear interpolation, such as could be used for Perlin noise, etc. +// + +// A note on the structure of the lerp functions: +// The cases for b>a and b<=a are handled separately for +// speed: without knowing the relative order of a and b, +// the value (a-b) might be overflow the width of a or b, +// and have to be promoted to a wider, slower type. +// To avoid that, we separate the two cases, and are able +// to do all the math in the same width as the arguments, +// which is much faster and smaller on AVR. + +/// linear interpolation between two unsigned 8-bit values, +/// with 8-bit fraction +LIB8STATIC uint8_t lerp8by8( uint8_t a, uint8_t b, fract8 frac) +{ + uint8_t result; + if( b > a) { + uint8_t delta = b - a; + uint8_t scaled = scale8( delta, frac); + result = a + scaled; + } else { + uint8_t delta = a - b; + uint8_t scaled = scale8( delta, frac); + result = a - scaled; + } + return result; +} + +/// linear interpolation between two unsigned 16-bit values, +/// with 16-bit fraction +LIB8STATIC uint16_t lerp16by16( uint16_t a, uint16_t b, fract16 frac) +{ + uint16_t result; + if( b > a ) { + uint16_t delta = b - a; + uint16_t scaled = scale16(delta, frac); + result = a + scaled; + } else { + uint16_t delta = a - b; + uint16_t scaled = scale16( delta, frac); + result = a - scaled; + } + return result; +} + +/// linear interpolation between two unsigned 16-bit values, +/// with 8-bit fraction +LIB8STATIC uint16_t lerp16by8( uint16_t a, uint16_t b, fract8 frac) +{ + uint16_t result; + if( b > a) { + uint16_t delta = b - a; + uint16_t scaled = scale16by8( delta, frac); + result = a + scaled; + } else { + uint16_t delta = a - b; + uint16_t scaled = scale16by8( delta, frac); + result = a - scaled; + } + return result; +} + +/// linear interpolation between two signed 15-bit values, +/// with 8-bit fraction +LIB8STATIC int16_t lerp15by8( int16_t a, int16_t b, fract8 frac) +{ + int16_t result; + if( b > a) { + uint16_t delta = b - a; + uint16_t scaled = scale16by8( delta, frac); + result = a + scaled; + } else { + uint16_t delta = a - b; + uint16_t scaled = scale16by8( delta, frac); + result = a - scaled; + } + return result; +} + +/// linear interpolation between two signed 15-bit values, +/// with 8-bit fraction +LIB8STATIC int16_t lerp15by16( int16_t a, int16_t b, fract16 frac) +{ + int16_t result; + if( b > a) { + uint16_t delta = b - a; + uint16_t scaled = scale16( delta, frac); + result = a + scaled; + } else { + uint16_t delta = a - b; + uint16_t scaled = scale16( delta, frac); + result = a - scaled; + } + return result; +} + +/// map8: map from one full-range 8-bit value into a narrower +/// range of 8-bit values, possibly a range of hues. +/// +/// E.g. map myValue into a hue in the range blue..purple..pink..red +/// hue = map8( myValue, HUE_BLUE, HUE_RED); +/// +/// Combines nicely with the waveform functions (like sin8, etc) +/// to produce continuous hue gradients back and forth: +/// +/// hue = map8( sin8( myValue), HUE_BLUE, HUE_RED); +/// +/// Mathematically simiar to lerp8by8, but arguments are more +/// like Arduino's "map"; this function is similar to +/// +/// map( in, 0, 255, rangeStart, rangeEnd) +/// +/// but faster and specifically designed for 8-bit values. +LIB8STATIC uint8_t map8( uint8_t in, uint8_t rangeStart, uint8_t rangeEnd) +{ + uint8_t rangeWidth = rangeEnd - rangeStart; + uint8_t out = scale8( in, rangeWidth); + out += rangeStart; + return out; +} + + +/////////////////////////////////////////////////////////////////////// +// +// easing functions; see http://easings.net +// + +/// ease8InOutQuad: 8-bit quadratic ease-in / ease-out function +/// Takes around 13 cycles on AVR +#if EASE8_C == 1 +LIB8STATIC uint8_t ease8InOutQuad( uint8_t i) +{ + uint8_t j = i; + if( j & 0x80 ) { + j = 255 - j; + } + uint8_t jj = scale8( j, j); + uint8_t jj2 = jj << 1; + if( i & 0x80 ) { + jj2 = 255 - jj2; + } + return jj2; +} + +#elif EASE8_AVRASM == 1 +// This AVR asm version of ease8InOutQuad preserves one more +// low-bit of precision than the C version, and is also slightly +// smaller and faster. +LIB8STATIC uint8_t ease8InOutQuad(uint8_t val) { + uint8_t j=val; + asm volatile ( + "sbrc %[val], 7 \n" + "com %[j] \n" + "mul %[j], %[j] \n" + "add r0, %[j] \n" + "ldi %[j], 0 \n" + "adc %[j], r1 \n" + "lsl r0 \n" // carry = high bit of low byte of mul product + "rol %[j] \n" // j = (j * 2) + carry // preserve add'l bit of precision + "sbrc %[val], 7 \n" + "com %[j] \n" + "clr __zero_reg__ \n" + : [j] "+&a" (j) + : [val] "a" (val) + : "r0", "r1" + ); + return j; +} + +#else +#error "No implementation for ease8InOutQuad available." +#endif + +/// ease16InOutQuad: 16-bit quadratic ease-in / ease-out function +// C implementation at this point +LIB8STATIC uint16_t ease16InOutQuad( uint16_t i) +{ + uint16_t j = i; + if( j & 0x8000 ) { + j = 65535 - j; + } + uint16_t jj = scale16( j, j); + uint16_t jj2 = jj << 1; + if( i & 0x8000 ) { + jj2 = 65535 - jj2; + } + return jj2; +} + + +/// ease8InOutCubic: 8-bit cubic ease-in / ease-out function +/// Takes around 18 cycles on AVR +LIB8STATIC fract8 ease8InOutCubic( fract8 i) +{ + uint8_t ii = scale8_LEAVING_R1_DIRTY( i, i); + uint8_t iii = scale8_LEAVING_R1_DIRTY( ii, i); + + uint16_t r1 = (3 * (uint16_t)(ii)) - ( 2 * (uint16_t)(iii)); + + /* the code generated for the above *'s automatically + cleans up R1, so there's no need to explicitily call + cleanup_R1(); */ + + uint8_t result = r1; + + // if we got "256", return 255: + if( r1 & 0x100 ) { + result = 255; + } + return result; +} + +/// ease8InOutApprox: fast, rough 8-bit ease-in/ease-out function +/// shaped approximately like 'ease8InOutCubic', +/// it's never off by more than a couple of percent +/// from the actual cubic S-curve, and it executes +/// more than twice as fast. Use when the cycles +/// are more important than visual smoothness. +/// Asm version takes around 7 cycles on AVR. + +#if EASE8_C == 1 +LIB8STATIC fract8 ease8InOutApprox( fract8 i) +{ + if( i < 64) { + // start with slope 0.5 + i /= 2; + } else if( i > (255 - 64)) { + // end with slope 0.5 + i = 255 - i; + i /= 2; + i = 255 - i; + } else { + // in the middle, use slope 192/128 = 1.5 + i -= 64; + i += (i / 2); + i += 32; + } + + return i; +} + +#elif EASE8_AVRASM == 1 +LIB8STATIC uint8_t ease8InOutApprox( fract8 i) +{ + // takes around 7 cycles on AVR + asm volatile ( + " subi %[i], 64 \n\t" + " cpi %[i], 128 \n\t" + " brcc Lshift_%= \n\t" + + // middle case + " mov __tmp_reg__, %[i] \n\t" + " lsr __tmp_reg__ \n\t" + " add %[i], __tmp_reg__ \n\t" + " subi %[i], 224 \n\t" + " rjmp Ldone_%= \n\t" + + // start or end case + "Lshift_%=: \n\t" + " lsr %[i] \n\t" + " subi %[i], 96 \n\t" + + "Ldone_%=: \n\t" + + : [i] "+&a" (i) + : + : "r0", "r1" + ); + return i; +} +#else +#error "No implementation for ease8 available." +#endif + + + +/// triwave8: triangle (sawtooth) wave generator. Useful for +/// turning a one-byte ever-increasing value into a +/// one-byte value that oscillates up and down. +/// +/// input output +/// 0..127 0..254 (positive slope) +/// 128..255 254..0 (negative slope) +/// +/// On AVR this function takes just three cycles. +/// +LIB8STATIC uint8_t triwave8(uint8_t in) +{ + if( in & 0x80) { + in = 255 - in; + } + uint8_t out = in << 1; + return out; +} + + +// quadwave8 and cubicwave8: S-shaped wave generators (like 'sine'). +// Useful for turning a one-byte 'counter' value into a +// one-byte oscillating value that moves smoothly up and down, +// with an 'acceleration' and 'deceleration' curve. +// +// These are even faster than 'sin8', and have +// slightly different curve shapes. +// + +/// quadwave8: quadratic waveform generator. Spends just a little more +/// time at the limits than 'sine' does. +LIB8STATIC uint8_t quadwave8(uint8_t in) +{ + return ease8InOutQuad( triwave8( in)); +} + +/// cubicwave8: cubic waveform generator. Spends visibly more time +/// at the limits than 'sine' does. +LIB8STATIC uint8_t cubicwave8(uint8_t in) +{ + return ease8InOutCubic( triwave8( in)); +} + +/// squarewave8: square wave generator. Useful for +/// turning a one-byte ever-increasing value +/// into a one-byte value that is either 0 or 255. +/// The width of the output 'pulse' is +/// determined by the pulsewidth argument: +/// +///~~~ +/// If pulsewidth is 255, output is always 255. +/// If pulsewidth < 255, then +/// if input < pulsewidth then output is 255 +/// if input >= pulsewidth then output is 0 +///~~~ +/// +/// the output looking like: +/// +///~~~ +/// 255 +--pulsewidth--+ +/// . | | +/// 0 0 +--------(256-pulsewidth)-------- +///~~~ +/// +/// @param in +/// @param pulsewidth +/// @returns square wave output +LIB8STATIC uint8_t squarewave8( uint8_t in, uint8_t pulsewidth) +{ + if( in < pulsewidth || (pulsewidth == 255)) { + return 255; + } else { + return 0; + } +} + + +// Beat generators - These functions produce waves at a given +// number of 'beats per minute'. Internally, they use +// the Arduino function 'millis' to track elapsed time. +// Accuracy is a bit better than one part in a thousand. +// +// beat8( BPM ) returns an 8-bit value that cycles 'BPM' times +// per minute, rising from 0 to 255, resetting to zero, +// rising up again, etc.. The output of this function +// is suitable for feeding directly into sin8, and cos8, +// triwave8, quadwave8, and cubicwave8. +// beat16( BPM ) returns a 16-bit value that cycles 'BPM' times +// per minute, rising from 0 to 65535, resetting to zero, +// rising up again, etc. The output of this function is +// suitable for feeding directly into sin16 and cos16. +// beat88( BPM88) is the same as beat16, except that the BPM88 argument +// MUST be in Q8.8 fixed point format, e.g. 120BPM must +// be specified as 120*256 = 30720. +// beatsin8( BPM, uint8_t low, uint8_t high) returns an 8-bit value that +// rises and falls in a sine wave, 'BPM' times per minute, +// between the values of 'low' and 'high'. +// beatsin16( BPM, uint16_t low, uint16_t high) returns a 16-bit value +// that rises and falls in a sine wave, 'BPM' times per +// minute, between the values of 'low' and 'high'. +// beatsin88( BPM88, ...) is the same as beatsin16, except that the +// BPM88 argument MUST be in Q8.8 fixed point format, +// e.g. 120BPM must be specified as 120*256 = 30720. +// +// BPM can be supplied two ways. The simpler way of specifying BPM is as +// a simple 8-bit integer from 1-255, (e.g., "120"). +// The more sophisticated way of specifying BPM allows for fractional +// "Q8.8" fixed point number (an 'accum88') with an 8-bit integer part and +// an 8-bit fractional part. The easiest way to construct this is to multiply +// a floating point BPM value (e.g. 120.3) by 256, (e.g. resulting in 30796 +// in this case), and pass that as the 16-bit BPM argument. +// "BPM88" MUST always be specified in Q8.8 format. +// +// Originally designed to make an entire animation project pulse with brightness. +// For that effect, add this line just above your existing call to "FastLED.show()": +// +// uint8_t bright = beatsin8( 60 /*BPM*/, 192 /*dimmest*/, 255 /*brightest*/ )); +// FastLED.setBrightness( bright ); +// FastLED.show(); +// +// The entire animation will now pulse between brightness 192 and 255 once per second. + + +// The beat generators need access to a millisecond counter. +// On Arduino, this is "millis()". On other platforms, you'll +// need to provide a function with this signature: +// uint32_t get_millisecond_timer(); +// that provides similar functionality. +// You can also force use of the get_millisecond_timer function +// by #defining USE_GET_MILLISECOND_TIMER. +#if (defined(ARDUINO) || defined(SPARK) || defined(FASTLED_HAS_MILLIS)) && !defined(USE_GET_MILLISECOND_TIMER) +// Forward declaration of Arduino function 'millis'. +//uint32_t millis(); +#define GET_MILLIS millis +#else +uint32_t get_millisecond_timer(void); +#define GET_MILLIS get_millisecond_timer +#endif + +// beat16 generates a 16-bit 'sawtooth' wave at a given BPM, +/// with BPM specified in Q8.8 fixed-point format; e.g. +/// for this function, 120 BPM MUST BE specified as +/// 120*256 = 30720. +/// If you just want to specify "120", use beat16 or beat8. +LIB8STATIC uint16_t beat88( accum88 beats_per_minute_88, uint32_t timebase) +{ + // BPM is 'beats per minute', or 'beats per 60000ms'. + // To avoid using the (slower) division operator, we + // want to convert 'beats per 60000ms' to 'beats per 65536ms', + // and then use a simple, fast bit-shift to divide by 65536. + // + // The ratio 65536:60000 is 279.620266667:256; we'll call it 280:256. + // The conversion is accurate to about 0.05%, more or less, + // e.g. if you ask for "120 BPM", you'll get about "119.93". + return (((GET_MILLIS()) - timebase) * beats_per_minute_88 * 280) >> 16; +} + +/// beat16 generates a 16-bit 'sawtooth' wave at a given BPM +LIB8STATIC uint16_t beat16( accum88 beats_per_minute, uint32_t timebase) +{ + // Convert simple 8-bit BPM's to full Q8.8 accum88's if needed + if( beats_per_minute < 256) beats_per_minute <<= 8; + return beat88(beats_per_minute, timebase); +} + +/// beat8 generates an 8-bit 'sawtooth' wave at a given BPM +LIB8STATIC uint8_t beat8( accum88 beats_per_minute, uint32_t timebase) +{ + return beat16( beats_per_minute, timebase) >> 8; +} + +/// beatsin88 generates a 16-bit sine wave at a given BPM, +/// that oscillates within a given range. +/// For this function, BPM MUST BE SPECIFIED as +/// a Q8.8 fixed-point value; e.g. 120BPM must be +/// specified as 120*256 = 30720. +/// If you just want to specify "120", use beatsin16 or beatsin8. +LIB8STATIC uint16_t beatsin88( accum88 beats_per_minute_88, uint16_t lowest, uint16_t highest, uint32_t timebase, uint16_t phase_offset) +{ + uint16_t beat = beat88( beats_per_minute_88, timebase); + uint16_t beatsin = (sin16( beat + phase_offset) + 32768); + uint16_t rangewidth = highest - lowest; + uint16_t scaledbeat = scale16( beatsin, rangewidth); + uint16_t result = lowest + scaledbeat; + return result; +} + +/// beatsin16 generates a 16-bit sine wave at a given BPM, +/// that oscillates within a given range. +LIB8STATIC uint16_t beatsin16(accum88 beats_per_minute, uint16_t lowest, uint16_t highest, uint32_t timebase, uint16_t phase_offset) +{ + uint16_t beat = beat16( beats_per_minute, timebase); + uint16_t beatsin = (sin16( beat + phase_offset) + 32768); + uint16_t rangewidth = highest - lowest; + uint16_t scaledbeat = scale16( beatsin, rangewidth); + uint16_t result = lowest + scaledbeat; + return result; +} + +/// beatsin8 generates an 8-bit sine wave at a given BPM, +/// that oscillates within a given range. +LIB8STATIC uint8_t beatsin8( accum88 beats_per_minute, uint8_t lowest, uint8_t highest, uint32_t timebase, uint8_t phase_offset) +{ + uint8_t beat = beat8( beats_per_minute, timebase); + uint8_t beatsin = sin8( beat + phase_offset); + uint8_t rangewidth = highest - lowest; + uint8_t scaledbeat = scale8( beatsin, rangewidth); + uint8_t result = lowest + scaledbeat; + return result; +} + + +/// Return the current seconds since boot in a 16-bit value. Used as part of the +/// "every N time-periods" mechanism +LIB8STATIC uint16_t seconds16(void) +{ + uint32_t ms = GET_MILLIS(); + uint16_t s16; + s16 = ms / 1000; + return s16; +} + +/// Return the current minutes since boot in a 16-bit value. Used as part of the +/// "every N time-periods" mechanism +LIB8STATIC uint16_t minutes16(void) +{ + uint32_t ms = GET_MILLIS(); + uint16_t m16; + m16 = (ms / (60000L)) & 0xFFFF; + return m16; +} + +/// Return the current hours since boot in an 8-bit value. Used as part of the +/// "every N time-periods" mechanism +LIB8STATIC uint8_t hours8(void) +{ + uint32_t ms = GET_MILLIS(); + uint8_t h8; + h8 = (ms / (3600000L)) & 0xFF; + return h8; +} + +///@} + +#endif diff --git a/lib/lib8tion/math8.h b/lib/lib8tion/math8.h new file mode 100644 index 0000000000..8c6b6c227e --- /dev/null +++ b/lib/lib8tion/math8.h @@ -0,0 +1,552 @@ +#ifndef __INC_LIB8TION_MATH_H +#define __INC_LIB8TION_MATH_H + +#include "scale8.h" + +///@ingroup lib8tion + +///@defgroup Math Basic math operations +/// Fast, efficient 8-bit math functions specifically +/// designed for high-performance LED programming. +/// +/// Because of the AVR(Arduino) and ARM assembly language +/// implementations provided, using these functions often +/// results in smaller and faster code than the equivalent +/// program using plain "C" arithmetic and logic. +///@{ + + +/// add one byte to another, saturating at 0xFF +/// @param i - first byte to add +/// @param j - second byte to add +/// @returns the sum of i & j, capped at 0xFF +LIB8STATIC_ALWAYS_INLINE uint8_t qadd8( uint8_t i, uint8_t j) +{ +#if QADD8_C == 1 + uint16_t t = i + j; + if (t > 255) t = 255; + return t; +#elif QADD8_AVRASM == 1 + asm volatile( + /* First, add j to i, conditioning the C flag */ + "add %0, %1 \n\t" + + /* Now test the C flag. + If C is clear, we branch around a load of 0xFF into i. + If C is set, we go ahead and load 0xFF into i. + */ + "brcc L_%= \n\t" + "ldi %0, 0xFF \n\t" + "L_%=: " + : "+a" (i) + : "a" (j) ); + return i; +#elif QADD8_ARM_DSP_ASM == 1 + asm volatile( "uqadd8 %0, %0, %1" : "+r" (i) : "r" (j)); + return i; +#else +#error "No implementation for qadd8 available." +#endif +} + +/// Add one byte to another, saturating at 0x7F +/// @param i - first byte to add +/// @param j - second byte to add +/// @returns the sum of i & j, capped at 0xFF +LIB8STATIC_ALWAYS_INLINE int8_t qadd7( int8_t i, int8_t j) +{ +#if QADD7_C == 1 + int16_t t = i + j; + if (t > 127) t = 127; + return t; +#elif QADD7_AVRASM == 1 + asm volatile( + /* First, add j to i, conditioning the V flag */ + "add %0, %1 \n\t" + + /* Now test the V flag. + If V is clear, we branch around a load of 0x7F into i. + If V is set, we go ahead and load 0x7F into i. + */ + "brvc L_%= \n\t" + "ldi %0, 0x7F \n\t" + "L_%=: " + : "+a" (i) + : "a" (j) ); + + return i; +#elif QADD7_ARM_DSP_ASM == 1 + asm volatile( "qadd8 %0, %0, %1" : "+r" (i) : "r" (j)); + return i; +#else +#error "No implementation for qadd7 available." +#endif +} + +/// subtract one byte from another, saturating at 0x00 +/// @returns i - j with a floor of 0 +LIB8STATIC_ALWAYS_INLINE uint8_t qsub8( uint8_t i, uint8_t j) +{ +#if QSUB8_C == 1 + int16_t t = i - j; + if (t < 0) t = 0; + return t; +#elif QSUB8_AVRASM == 1 + + asm volatile( + /* First, subtract j from i, conditioning the C flag */ + "sub %0, %1 \n\t" + + /* Now test the C flag. + If C is clear, we branch around a load of 0x00 into i. + If C is set, we go ahead and load 0x00 into i. + */ + "brcc L_%= \n\t" + "ldi %0, 0x00 \n\t" + "L_%=: " + : "+a" (i) + : "a" (j) ); + + return i; +#else +#error "No implementation for qsub8 available." +#endif +} + +/// add one byte to another, with one byte result +LIB8STATIC_ALWAYS_INLINE uint8_t add8( uint8_t i, uint8_t j) +{ +#if ADD8_C == 1 + uint16_t t = i + j; + return t; +#elif ADD8_AVRASM == 1 + // Add j to i, period. + asm volatile( "add %0, %1" : "+a" (i) : "a" (j)); + return i; +#else +#error "No implementation for add8 available." +#endif +} + +/// add one byte to another, with one byte result +LIB8STATIC_ALWAYS_INLINE uint16_t add8to16( uint8_t i, uint16_t j) +{ +#if ADD8_C == 1 + uint16_t t = i + j; + return t; +#elif ADD8_AVRASM == 1 + // Add i(one byte) to j(two bytes) + asm volatile( "add %A[j], %[i] \n\t" + "adc %B[j], __zero_reg__ \n\t" + : [j] "+a" (j) + : [i] "a" (i) + ); + return i; +#else +#error "No implementation for add8to16 available." +#endif +} + + +/// subtract one byte from another, 8-bit result +LIB8STATIC_ALWAYS_INLINE uint8_t sub8( uint8_t i, uint8_t j) +{ +#if SUB8_C == 1 + int16_t t = i - j; + return t; +#elif SUB8_AVRASM == 1 + // Subtract j from i, period. + asm volatile( "sub %0, %1" : "+a" (i) : "a" (j)); + return i; +#else +#error "No implementation for sub8 available." +#endif +} + +/// Calculate an integer average of two unsigned +/// 8-bit integer values (uint8_t). +/// Fractional results are rounded down, e.g. avg8(20,41) = 30 +LIB8STATIC_ALWAYS_INLINE uint8_t avg8( uint8_t i, uint8_t j) +{ +#if AVG8_C == 1 + return (i + j) >> 1; +#elif AVG8_AVRASM == 1 + asm volatile( + /* First, add j to i, 9th bit overflows into C flag */ + "add %0, %1 \n\t" + /* Divide by two, moving C flag into high 8th bit */ + "ror %0 \n\t" + : "+a" (i) + : "a" (j) ); + return i; +#else +#error "No implementation for avg8 available." +#endif +} + +/// Calculate an integer average of two unsigned +/// 16-bit integer values (uint16_t). +/// Fractional results are rounded down, e.g. avg16(20,41) = 30 +LIB8STATIC_ALWAYS_INLINE uint16_t avg16( uint16_t i, uint16_t j) +{ +#if AVG16_C == 1 + return (uint32_t)((uint32_t)(i) + (uint32_t)(j)) >> 1; +#elif AVG16_AVRASM == 1 + asm volatile( + /* First, add jLo (heh) to iLo, 9th bit overflows into C flag */ + "add %A[i], %A[j] \n\t" + /* Now, add C + jHi to iHi, 17th bit overflows into C flag */ + "adc %B[i], %B[j] \n\t" + /* Divide iHi by two, moving C flag into high 16th bit, old 9th bit now in C */ + "ror %B[i] \n\t" + /* Divide iLo by two, moving C flag into high 8th bit */ + "ror %A[i] \n\t" + : [i] "+a" (i) + : [j] "a" (j) ); + return i; +#else +#error "No implementation for avg16 available." +#endif +} + + +/// Calculate an integer average of two signed 7-bit +/// integers (int8_t) +/// If the first argument is even, result is rounded down. +/// If the first argument is odd, result is result up. +LIB8STATIC_ALWAYS_INLINE int8_t avg7( int8_t i, int8_t j) +{ +#if AVG7_C == 1 + return ((i + j) >> 1) + (i & 0x1); +#elif AVG7_AVRASM == 1 + asm volatile( + "asr %1 \n\t" + "asr %0 \n\t" + "adc %0, %1 \n\t" + : "+a" (i) + : "a" (j) ); + return i; +#else +#error "No implementation for avg7 available." +#endif +} + +/// Calculate an integer average of two signed 15-bit +/// integers (int16_t) +/// If the first argument is even, result is rounded down. +/// If the first argument is odd, result is result up. +LIB8STATIC_ALWAYS_INLINE int16_t avg15( int16_t i, int16_t j) +{ +#if AVG15_C == 1 + return ((int32_t)((int32_t)(i) + (int32_t)(j)) >> 1) + (i & 0x1); +#elif AVG15_AVRASM == 1 + asm volatile( + /* first divide j by 2, throwing away lowest bit */ + "asr %B[j] \n\t" + "ror %A[j] \n\t" + /* now divide i by 2, with lowest bit going into C */ + "asr %B[i] \n\t" + "ror %A[i] \n\t" + /* add j + C to i */ + "adc %A[i], %A[j] \n\t" + "adc %B[i], %B[j] \n\t" + : [i] "+a" (i) + : [j] "a" (j) ); + return i; +#else +#error "No implementation for avg15 available." +#endif +} + + +/// Calculate the remainder of one unsigned 8-bit +/// value divided by anoter, aka A % M. +/// Implemented by repeated subtraction, which is +/// very compact, and very fast if A is 'probably' +/// less than M. If A is a large multiple of M, +/// the loop has to execute multiple times. However, +/// even in that case, the loop is only two +/// instructions long on AVR, i.e., quick. +LIB8STATIC_ALWAYS_INLINE uint8_t mod8( uint8_t a, uint8_t m) +{ +#if defined(__AVR__) + asm volatile ( + "L_%=: sub %[a],%[m] \n\t" + " brcc L_%= \n\t" + " add %[a],%[m] \n\t" + : [a] "+r" (a) + : [m] "r" (m) + ); +#else + while( a >= m) a -= m; +#endif + return a; +} + +/// Add two numbers, and calculate the modulo +/// of the sum and a third number, M. +/// In other words, it returns (A+B) % M. +/// It is designed as a compact mechanism for +/// incrementing a 'mode' switch and wrapping +/// around back to 'mode 0' when the switch +/// goes past the end of the available range. +/// e.g. if you have seven modes, this switches +/// to the next one and wraps around if needed: +/// mode = addmod8( mode, 1, 7); +///LIB8STATIC_ALWAYS_INLINESee 'mod8' for notes on performance. +LIB8STATIC uint8_t addmod8( uint8_t a, uint8_t b, uint8_t m) +{ +#if defined(__AVR__) + asm volatile ( + " add %[a],%[b] \n\t" + "L_%=: sub %[a],%[m] \n\t" + " brcc L_%= \n\t" + " add %[a],%[m] \n\t" + : [a] "+r" (a) + : [b] "r" (b), [m] "r" (m) + ); +#else + a += b; + while( a >= m) a -= m; +#endif + return a; +} + +/// Subtract two numbers, and calculate the modulo +/// of the difference and a third number, M. +/// In other words, it returns (A-B) % M. +/// It is designed as a compact mechanism for +/// incrementing a 'mode' switch and wrapping +/// around back to 'mode 0' when the switch +/// goes past the end of the available range. +/// e.g. if you have seven modes, this switches +/// to the next one and wraps around if needed: +/// mode = addmod8( mode, 1, 7); +///LIB8STATIC_ALWAYS_INLINESee 'mod8' for notes on performance. +LIB8STATIC uint8_t submod8( uint8_t a, uint8_t b, uint8_t m) +{ +#if defined(__AVR__) + asm volatile ( + " sub %[a],%[b] \n\t" + "L_%=: sub %[a],%[m] \n\t" + " brcc L_%= \n\t" + " add %[a],%[m] \n\t" + : [a] "+r" (a) + : [b] "r" (b), [m] "r" (m) + ); +#else + a -= b; + while( a >= m) a -= m; +#endif + return a; +} + +/// 8x8 bit multiplication, with 8 bit result +LIB8STATIC_ALWAYS_INLINE uint8_t mul8( uint8_t i, uint8_t j) +{ +#if MUL8_C == 1 + return ((uint16_t)i * (uint16_t)(j) ) & 0xFF; +#elif MUL8_AVRASM == 1 + asm volatile( + /* Multiply 8-bit i * 8-bit j, giving 16-bit r1,r0 */ + "mul %0, %1 \n\t" + /* Extract the LOW 8-bits (r0) */ + "mov %0, r0 \n\t" + /* Restore r1 to "0"; it's expected to always be that */ + "clr __zero_reg__ \n\t" + : "+a" (i) + : "a" (j) + : "r0", "r1"); + + return i; +#else +#error "No implementation for mul8 available." +#endif +} + + +/// saturating 8x8 bit multiplication, with 8 bit result +/// @returns the product of i * j, capping at 0xFF +LIB8STATIC_ALWAYS_INLINE uint8_t qmul8( uint8_t i, uint8_t j) +{ +#if QMUL8_C == 1 + int p = ((uint16_t)i * (uint16_t)(j) ); + if( p > 255) p = 255; + return p; +#elif QMUL8_AVRASM == 1 + asm volatile( + /* Multiply 8-bit i * 8-bit j, giving 16-bit r1,r0 */ + " mul %0, %1 \n\t" + /* If high byte of result is zero, all is well. */ + " tst r1 \n\t" + " breq Lnospill_%= \n\t" + /* If high byte of result > 0, saturate low byte to 0xFF */ + " ldi %0,0xFF \n\t" + " rjmp Ldone_%= \n\t" + "Lnospill_%=: \n\t" + /* Extract the LOW 8-bits (r0) */ + " mov %0, r0 \n\t" + "Ldone_%=: \n\t" + /* Restore r1 to "0"; it's expected to always be that */ + " clr __zero_reg__ \n\t" + : "+a" (i) + : "a" (j) + : "r0", "r1"); + + return i; +#else +#error "No implementation for qmul8 available." +#endif +} + + +/// take abs() of a signed 8-bit uint8_t +LIB8STATIC_ALWAYS_INLINE int8_t abs8( int8_t i) +{ +#if ABS8_C == 1 + if( i < 0) i = -i; + return i; +#elif ABS8_AVRASM == 1 + + + asm volatile( + /* First, check the high bit, and prepare to skip if it's clear */ + "sbrc %0, 7 \n" + + /* Negate the value */ + "neg %0 \n" + + : "+r" (i) : "r" (i) ); + return i; +#else +#error "No implementation for abs8 available." +#endif +} + +/// square root for 16-bit integers +/// About three times faster and five times smaller +/// than Arduino's general sqrt on AVR. +LIB8STATIC uint8_t sqrt16(uint16_t x) +{ + if( x <= 1) { + return x; + } + + uint8_t low = 1; // lower bound + uint8_t hi, mid; + + if( x > 7904) { + hi = 255; + } else { + hi = (x >> 5) + 8; // initial estimate for upper bound + } + + do { + mid = (low + hi) >> 1; + if ((uint16_t)(mid * mid) > x) { + hi = mid - 1; + } else { + if( mid == 255) { + return 255; + } + low = mid + 1; + } + } while (hi >= low); + + return low - 1; +} + +/// blend a variable proproportion(0-255) of one byte to another +/// @param a - the starting byte value +/// @param b - the byte value to blend toward +/// @param amountOfB - the proportion (0-255) of b to blend +/// @returns a byte value between a and b, inclusive +#if (FASTLED_BLEND_FIXED == 1) +LIB8STATIC uint8_t blend8( uint8_t a, uint8_t b, uint8_t amountOfB) +{ +#if BLEND8_C == 1 + uint16_t partial; + uint8_t result; + + uint8_t amountOfA = 255 - amountOfB; + + partial = (a * amountOfA); +#if (FASTLED_SCALE8_FIXED == 1) + partial += a; + //partial = add8to16( a, partial); +#endif + + partial += (b * amountOfB); +#if (FASTLED_SCALE8_FIXED == 1) + partial += b; + //partial = add8to16( b, partial); +#endif + + result = partial >> 8; + + return result; + +#elif BLEND8_AVRASM == 1 + uint16_t partial; + uint8_t result; + + asm volatile ( + /* partial = b * amountOfB */ + " mul %[b], %[amountOfB] \n\t" + " movw %A[partial], r0 \n\t" + + /* amountOfB (aka amountOfA) = 255 - amountOfB */ + " com %[amountOfB] \n\t" + + /* partial += a * amountOfB (aka amountOfA) */ + " mul %[a], %[amountOfB] \n\t" + + " add %A[partial], r0 \n\t" + " adc %B[partial], r1 \n\t" + + " clr __zero_reg__ \n\t" + +#if (FASTLED_SCALE8_FIXED == 1) + /* partial += a */ + " add %A[partial], %[a] \n\t" + " adc %B[partial], __zero_reg__ \n\t" + + // partial += b + " add %A[partial], %[b] \n\t" + " adc %B[partial], __zero_reg__ \n\t" +#endif + + : [partial] "=r" (partial), + [amountOfB] "+a" (amountOfB) + : [a] "a" (a), + [b] "a" (b) + : "r0", "r1" + ); + + result = partial >> 8; + + return result; + +#else +#error "No implementation for blend8 available." +#endif +} + +#else +LIB8STATIC uint8_t blend8( uint8_t a, uint8_t b, uint8_t amountOfB) +{ + // This version loses precision in the integer math + // and can actually return results outside of the range + // from a to b. Its use is not recommended. + uint8_t result; + uint8_t amountOfA = 255 - amountOfB; + result = scale8_LEAVING_R1_DIRTY( a, amountOfA) + + scale8_LEAVING_R1_DIRTY( b, amountOfB); + cleanup_R1(); + return result; +} +#endif + + +///@} +#endif diff --git a/lib/lib8tion/random8.h b/lib/lib8tion/random8.h new file mode 100644 index 0000000000..7ee67cbb36 --- /dev/null +++ b/lib/lib8tion/random8.h @@ -0,0 +1,94 @@ +#ifndef __INC_LIB8TION_RANDOM_H +#define __INC_LIB8TION_RANDOM_H +///@ingroup lib8tion + +///@defgroup Random Fast random number generators +/// Fast 8- and 16- bit unsigned random numbers. +/// Significantly faster than Arduino random(), but +/// also somewhat less random. You can add entropy. +///@{ + +// X(n+1) = (2053 * X(n)) + 13849) +#define FASTLED_RAND16_2053 ((uint16_t)(2053)) +#define FASTLED_RAND16_13849 ((uint16_t)(13849)) + +/// random number seed +extern uint16_t rand16seed;// = RAND16_SEED; + +/// Generate an 8-bit random number +LIB8STATIC uint8_t random8(void) +{ + rand16seed = (rand16seed * FASTLED_RAND16_2053) + FASTLED_RAND16_13849; + // return the sum of the high and low bytes, for better + // mixing and non-sequential correlation + return (uint8_t)(((uint8_t)(rand16seed & 0xFF)) + + ((uint8_t)(rand16seed >> 8))); +} + +/// Generate a 16 bit random number +LIB8STATIC uint16_t random16(void) +{ + rand16seed = (rand16seed * FASTLED_RAND16_2053) + FASTLED_RAND16_13849; + return rand16seed; +} + +/// Generate an 8-bit random number between 0 and lim +/// @param lim the upper bound for the result +LIB8STATIC uint8_t random8_max(uint8_t lim) +{ + uint8_t r = random8(); + r = (r*lim) >> 8; + return r; +} + +/// Generate an 8-bit random number in the given range +/// @param min the lower bound for the random number +/// @param lim the upper bound for the random number +LIB8STATIC uint8_t random8_min_max(uint8_t min, uint8_t lim) +{ + uint8_t delta = lim - min; + uint8_t r = random8_max(delta) + min; + return r; +} + +/// Generate an 16-bit random number between 0 and lim +/// @param lim the upper bound for the result +LIB8STATIC uint16_t random16_max(uint16_t lim) +{ + uint16_t r = random16(); + uint32_t p = (uint32_t)lim * (uint32_t)r; + r = p >> 16; + return r; +} + +/// Generate an 16-bit random number in the given range +/// @param min the lower bound for the random number +/// @param lim the upper bound for the random number +LIB8STATIC uint16_t random16_min_max( uint16_t min, uint16_t lim) +{ + uint16_t delta = lim - min; + uint16_t r = random16_max(delta) + min; + return r; +} + +/// Set the 16-bit seed used for the random number generator +LIB8STATIC void random16_set_seed(uint16_t seed) +{ + rand16seed = seed; +} + +/// Get the current seed value for the random number generator +LIB8STATIC uint16_t random16_get_seed(void) +{ + return rand16seed; +} + +/// Add entropy into the random number generator +LIB8STATIC void random16_add_entropy(uint16_t entropy) +{ + rand16seed += entropy; +} + +///@} + +#endif diff --git a/lib/lib8tion/scale8.h b/lib/lib8tion/scale8.h new file mode 100644 index 0000000000..9895fd4d79 --- /dev/null +++ b/lib/lib8tion/scale8.h @@ -0,0 +1,542 @@ +#ifndef __INC_LIB8TION_SCALE_H +#define __INC_LIB8TION_SCALE_H + +///@ingroup lib8tion + +///@defgroup Scaling Scaling functions +/// Fast, efficient 8-bit scaling functions specifically +/// designed for high-performance LED programming. +/// +/// Because of the AVR(Arduino) and ARM assembly language +/// implementations provided, using these functions often +/// results in smaller and faster code than the equivalent +/// program using plain "C" arithmetic and logic. +///@{ + +/// scale one byte by a second one, which is treated as +/// the numerator of a fraction whose denominator is 256 +/// In other words, it computes i * (scale / 256) +/// 4 clocks AVR with MUL, 2 clocks ARM +LIB8STATIC_ALWAYS_INLINE uint8_t scale8( uint8_t i, fract8 scale) +{ +#if SCALE8_C == 1 +#if (FASTLED_SCALE8_FIXED == 1) + return (((uint16_t)i) * (1+(uint16_t)(scale))) >> 8; +#else + return ((uint16_t)i * (uint16_t)(scale) ) >> 8; +#endif +#elif SCALE8_AVRASM == 1 +#if defined(LIB8_ATTINY) +#if (FASTLED_SCALE8_FIXED == 1) + uint8_t work=i; +#else + uint8_t work=0; +#endif + uint8_t cnt=0x80; + asm volatile( +#if (FASTLED_SCALE8_FIXED == 1) + " inc %[scale] \n\t" + " breq DONE_%= \n\t" + " clr %[work] \n\t" +#endif + "LOOP_%=: \n\t" + /*" sbrc %[scale], 0 \n\t" + " add %[work], %[i] \n\t" + " ror %[work] \n\t" + " lsr %[scale] \n\t" + " clc \n\t"*/ + " sbrc %[scale], 0 \n\t" + " add %[work], %[i] \n\t" + " ror %[work] \n\t" + " lsr %[scale] \n\t" + " lsr %[cnt] \n\t" + "brcc LOOP_%= \n\t" + "DONE_%=: \n\t" + : [work] "+r" (work), [cnt] "+r" (cnt) + : [scale] "r" (scale), [i] "r" (i) + : + ); + return work; +#else + asm volatile( +#if (FASTLED_SCALE8_FIXED==1) + // Multiply 8-bit i * 8-bit scale, giving 16-bit r1,r0 + "mul %0, %1 \n\t" + // Add i to r0, possibly setting the carry flag + "add r0, %0 \n\t" + // load the immediate 0 into i (note, this does _not_ touch any flags) + "ldi %0, 0x00 \n\t" + // walk and chew gum at the same time + "adc %0, r1 \n\t" +#else + /* Multiply 8-bit i * 8-bit scale, giving 16-bit r1,r0 */ + "mul %0, %1 \n\t" + /* Move the high 8-bits of the product (r1) back to i */ + "mov %0, r1 \n\t" + /* Restore r1 to "0"; it's expected to always be that */ +#endif + "clr __zero_reg__ \n\t" + + : "+a" (i) /* writes to i */ + : "a" (scale) /* uses scale */ + : "r0", "r1" /* clobbers r0, r1 */ ); + + /* Return the result */ + return i; +#endif +#else +#error "No implementation for scale8 available." +#endif +} + + +/// The "video" version of scale8 guarantees that the output will +/// be only be zero if one or both of the inputs are zero. If both +/// inputs are non-zero, the output is guaranteed to be non-zero. +/// This makes for better 'video'/LED dimming, at the cost of +/// several additional cycles. +LIB8STATIC_ALWAYS_INLINE uint8_t scale8_video( uint8_t i, fract8 scale) +{ +#if SCALE8_C == 1 || defined(LIB8_ATTINY) + uint8_t j = (((int)i * (int)scale) >> 8) + ((i&&scale)?1:0); + // uint8_t nonzeroscale = (scale != 0) ? 1 : 0; + // uint8_t j = (i == 0) ? 0 : (((int)i * (int)(scale) ) >> 8) + nonzeroscale; + return j; +#elif SCALE8_AVRASM == 1 + uint8_t j=0; + asm volatile( + " tst %[i]\n\t" + " breq L_%=\n\t" + " mul %[i], %[scale]\n\t" + " mov %[j], r1\n\t" + " clr __zero_reg__\n\t" + " cpse %[scale], r1\n\t" + " subi %[j], 0xFF\n\t" + "L_%=: \n\t" + : [j] "+a" (j) + : [i] "a" (i), [scale] "a" (scale) + : "r0", "r1"); + + return j; + // uint8_t nonzeroscale = (scale != 0) ? 1 : 0; + // asm volatile( + // " tst %0 \n" + // " breq L_%= \n" + // " mul %0, %1 \n" + // " mov %0, r1 \n" + // " add %0, %2 \n" + // " clr __zero_reg__ \n" + // "L_%=: \n" + + // : "+a" (i) + // : "a" (scale), "a" (nonzeroscale) + // : "r0", "r1"); + + // // Return the result + // return i; +#else +#error "No implementation for scale8_video available." +#endif +} + + +/// This version of scale8 does not clean up the R1 register on AVR +/// If you are doing several 'scale8's in a row, use this, and +/// then explicitly call cleanup_R1. +LIB8STATIC_ALWAYS_INLINE uint8_t scale8_LEAVING_R1_DIRTY( uint8_t i, fract8 scale) +{ +#if SCALE8_C == 1 +#if (FASTLED_SCALE8_FIXED == 1) + return (((uint16_t)i) * ((uint16_t)(scale)+1)) >> 8; +#else + return ((int)i * (int)(scale) ) >> 8; +#endif +#elif SCALE8_AVRASM == 1 + asm volatile( + #if (FASTLED_SCALE8_FIXED==1) + // Multiply 8-bit i * 8-bit scale, giving 16-bit r1,r0 + "mul %0, %1 \n\t" + // Add i to r0, possibly setting the carry flag + "add r0, %0 \n\t" + // load the immediate 0 into i (note, this does _not_ touch any flags) + "ldi %0, 0x00 \n\t" + // walk and chew gum at the same time + "adc %0, r1 \n\t" + #else + /* Multiply 8-bit i * 8-bit scale, giving 16-bit r1,r0 */ + "mul %0, %1 \n\t" + /* Move the high 8-bits of the product (r1) back to i */ + "mov %0, r1 \n\t" + #endif + /* R1 IS LEFT DIRTY HERE; YOU MUST ZERO IT OUT YOURSELF */ + /* "clr __zero_reg__ \n\t" */ + + : "+a" (i) /* writes to i */ + : "a" (scale) /* uses scale */ + : "r0", "r1" /* clobbers r0, r1 */ ); + + // Return the result + return i; +#else +#error "No implementation for scale8_LEAVING_R1_DIRTY available." +#endif +} + + +/// This version of scale8_video does not clean up the R1 register on AVR +/// If you are doing several 'scale8_video's in a row, use this, and +/// then explicitly call cleanup_R1. +LIB8STATIC_ALWAYS_INLINE uint8_t scale8_video_LEAVING_R1_DIRTY( uint8_t i, fract8 scale) +{ +#if SCALE8_C == 1 || defined(LIB8_ATTINY) + uint8_t j = (((int)i * (int)scale) >> 8) + ((i&&scale)?1:0); + // uint8_t nonzeroscale = (scale != 0) ? 1 : 0; + // uint8_t j = (i == 0) ? 0 : (((int)i * (int)(scale) ) >> 8) + nonzeroscale; + return j; +#elif SCALE8_AVRASM == 1 + uint8_t j=0; + asm volatile( + " tst %[i]\n\t" + " breq L_%=\n\t" + " mul %[i], %[scale]\n\t" + " mov %[j], r1\n\t" + " breq L_%=\n\t" + " subi %[j], 0xFF\n\t" + "L_%=: \n\t" + : [j] "+a" (j) + : [i] "a" (i), [scale] "a" (scale) + : "r0", "r1"); + + return j; + // uint8_t nonzeroscale = (scale != 0) ? 1 : 0; + // asm volatile( + // " tst %0 \n" + // " breq L_%= \n" + // " mul %0, %1 \n" + // " mov %0, r1 \n" + // " add %0, %2 \n" + // " clr __zero_reg__ \n" + // "L_%=: \n" + + // : "+a" (i) + // : "a" (scale), "a" (nonzeroscale) + // : "r0", "r1"); + + // // Return the result + // return i; +#else +#error "No implementation for scale8_video_LEAVING_R1_DIRTY available." +#endif +} + +/// Clean up the r1 register after a series of *LEAVING_R1_DIRTY calls +LIB8STATIC_ALWAYS_INLINE void cleanup_R1(void) +{ +#if CLEANUP_R1_AVRASM == 1 + // Restore r1 to "0"; it's expected to always be that + asm volatile( "clr __zero_reg__ \n\t" : : : "r1" ); +#endif +} + + +/// scale a 16-bit unsigned value by an 8-bit value, +/// considered as numerator of a fraction whose denominator +/// is 256. In other words, it computes i * (scale / 256) + +LIB8STATIC_ALWAYS_INLINE uint16_t scale16by8( uint16_t i, fract8 scale ) +{ +#if SCALE16BY8_C == 1 + uint16_t result; +#if FASTLED_SCALE8_FIXED == 1 + result = (i * (1+((uint16_t)scale))) >> 8; +#else + result = (i * scale) / 256; +#endif + return result; +#elif SCALE16BY8_AVRASM == 1 +#if FASTLED_SCALE8_FIXED == 1 + uint16_t result = 0; + asm volatile( + // result.A = HighByte( (i.A x scale) + i.A ) + " mul %A[i], %[scale] \n\t" + " add r0, %A[i] \n\t" + // " adc r1, [zero] \n\t" + // " mov %A[result], r1 \n\t" + " adc %A[result], r1 \n\t" + + // result.A-B += i.B x scale + " mul %B[i], %[scale] \n\t" + " add %A[result], r0 \n\t" + " adc %B[result], r1 \n\t" + + // cleanup r1 + " clr __zero_reg__ \n\t" + + // result.A-B += i.B + " add %A[result], %B[i] \n\t" + " adc %B[result], __zero_reg__ \n\t" + + : [result] "+r" (result) + : [i] "r" (i), [scale] "r" (scale) + : "r0", "r1" + ); + return result; +#else + uint16_t result = 0; + asm volatile( + // result.A = HighByte(i.A x j ) + " mul %A[i], %[scale] \n\t" + " mov %A[result], r1 \n\t" + //" clr %B[result] \n\t" + + // result.A-B += i.B x j + " mul %B[i], %[scale] \n\t" + " add %A[result], r0 \n\t" + " adc %B[result], r1 \n\t" + + // cleanup r1 + " clr __zero_reg__ \n\t" + + : [result] "+r" (result) + : [i] "r" (i), [scale] "r" (scale) + : "r0", "r1" + ); + return result; +#endif +#else + #error "No implementation for scale16by8 available." +#endif +} + +/// scale a 16-bit unsigned value by a 16-bit value, +/// considered as numerator of a fraction whose denominator +/// is 65536. In other words, it computes i * (scale / 65536) + +LIB8STATIC uint16_t scale16( uint16_t i, fract16 scale ) +{ + #if SCALE16_C == 1 + uint16_t result; +#if FASTLED_SCALE8_FIXED == 1 + result = ((uint32_t)(i) * (1+(uint32_t)(scale))) / 65536; +#else + result = ((uint32_t)(i) * (uint32_t)(scale)) / 65536; +#endif + return result; +#elif SCALE16_AVRASM == 1 +#if FASTLED_SCALE8_FIXED == 1 + // implemented sort of like + // result = ((i * scale) + i ) / 65536 + // + // why not like this, you may ask? + // result = (i * (scale+1)) / 65536 + // the answer is that if scale is 65535, then scale+1 + // will be zero, which is not what we want. + uint32_t result; + asm volatile( + // result.A-B = i.A x scale.A + " mul %A[i], %A[scale] \n\t" + // save results... + // basic idea: + //" mov %A[result], r0 \n\t" + //" mov %B[result], r1 \n\t" + // which can be written as... + " movw %A[result], r0 \n\t" + // Because we're going to add i.A-B to + // result.A-D, we DO need to keep both + // the r0 and r1 portions of the product + // UNlike in the 'unfixed scale8' version. + // So the movw here is needed. + : [result] "=r" (result) + : [i] "r" (i), + [scale] "r" (scale) + : "r0", "r1" + ); + + asm volatile( + // result.C-D = i.B x scale.B + " mul %B[i], %B[scale] \n\t" + //" mov %C[result], r0 \n\t" + //" mov %D[result], r1 \n\t" + " movw %C[result], r0 \n\t" + : [result] "+r" (result) + : [i] "r" (i), + [scale] "r" (scale) + : "r0", "r1" + ); + + const uint8_t zero = 0; + asm volatile( + // result.B-D += i.B x scale.A + " mul %B[i], %A[scale] \n\t" + + " add %B[result], r0 \n\t" + " adc %C[result], r1 \n\t" + " adc %D[result], %[zero] \n\t" + + // result.B-D += i.A x scale.B + " mul %A[i], %B[scale] \n\t" + + " add %B[result], r0 \n\t" + " adc %C[result], r1 \n\t" + " adc %D[result], %[zero] \n\t" + + // cleanup r1 + " clr r1 \n\t" + + : [result] "+r" (result) + : [i] "r" (i), + [scale] "r" (scale), + [zero] "r" (zero) + : "r0", "r1" + ); + + asm volatile( + // result.A-D += i.A-B + " add %A[result], %A[i] \n\t" + " adc %B[result], %B[i] \n\t" + " adc %C[result], %[zero] \n\t" + " adc %D[result], %[zero] \n\t" + : [result] "+r" (result) + : [i] "r" (i), + [zero] "r" (zero) + ); + + result = result >> 16; + return result; +#else + uint32_t result; + asm volatile( + // result.A-B = i.A x scale.A + " mul %A[i], %A[scale] \n\t" + // save results... + // basic idea: + //" mov %A[result], r0 \n\t" + //" mov %B[result], r1 \n\t" + // which can be written as... + " movw %A[result], r0 \n\t" + // We actually don't need to do anything with r0, + // as result.A is never used again here, so we + // could just move the high byte, but movw is + // one clock cycle, just like mov, so might as + // well, in case we want to use this code for + // a generic 16x16 multiply somewhere. + + : [result] "=r" (result) + : [i] "r" (i), + [scale] "r" (scale) + : "r0", "r1" + ); + + asm volatile( + // result.C-D = i.B x scale.B + " mul %B[i], %B[scale] \n\t" + //" mov %C[result], r0 \n\t" + //" mov %D[result], r1 \n\t" + " movw %C[result], r0 \n\t" + : [result] "+r" (result) + : [i] "r" (i), + [scale] "r" (scale) + : "r0", "r1" + ); + + const uint8_t zero = 0; + asm volatile( + // result.B-D += i.B x scale.A + " mul %B[i], %A[scale] \n\t" + + " add %B[result], r0 \n\t" + " adc %C[result], r1 \n\t" + " adc %D[result], %[zero] \n\t" + + // result.B-D += i.A x scale.B + " mul %A[i], %B[scale] \n\t" + + " add %B[result], r0 \n\t" + " adc %C[result], r1 \n\t" + " adc %D[result], %[zero] \n\t" + + // cleanup r1 + " clr r1 \n\t" + + : [result] "+r" (result) + : [i] "r" (i), + [scale] "r" (scale), + [zero] "r" (zero) + : "r0", "r1" + ); + + result = result >> 16; + return result; +#endif +#else + #error "No implementation for scale16 available." +#endif +} +///@} + +///@defgroup Dimming Dimming and brightening functions +/// +/// Dimming and brightening functions +/// +/// The eye does not respond in a linear way to light. +/// High speed PWM'd LEDs at 50% duty cycle appear far +/// brighter then the 'half as bright' you might expect. +/// +/// If you want your midpoint brightness leve (128) to +/// appear half as bright as 'full' brightness (255), you +/// have to apply a 'dimming function'. +///@{ + +/// Adjust a scaling value for dimming +LIB8STATIC uint8_t dim8_raw( uint8_t x) +{ + return scale8( x, x); +} + +/// Adjust a scaling value for dimming for video (value will never go below 1) +LIB8STATIC uint8_t dim8_video( uint8_t x) +{ + return scale8_video( x, x); +} + +/// Linear version of the dimming function that halves for values < 128 +LIB8STATIC uint8_t dim8_lin( uint8_t x ) +{ + if( x & 0x80 ) { + x = scale8( x, x); + } else { + x += 1; + x /= 2; + } + return x; +} + +/// inverse of the dimming function, brighten a value +LIB8STATIC uint8_t brighten8_raw( uint8_t x) +{ + uint8_t ix = 255 - x; + return 255 - scale8( ix, ix); +} + +/// inverse of the dimming function, brighten a value +LIB8STATIC uint8_t brighten8_video( uint8_t x) +{ + uint8_t ix = 255 - x; + return 255 - scale8_video( ix, ix); +} + +/// inverse of the dimming function, brighten a value +LIB8STATIC uint8_t brighten8_lin( uint8_t x ) +{ + uint8_t ix = 255 - x; + if( ix & 0x80 ) { + ix = scale8( ix, ix); + } else { + ix += 1; + ix /= 2; + } + return 255 - ix; +} + +///@} +#endif diff --git a/lib/lib8tion/trig8.h b/lib/lib8tion/trig8.h new file mode 100644 index 0000000000..4907c6ff30 --- /dev/null +++ b/lib/lib8tion/trig8.h @@ -0,0 +1,259 @@ +#ifndef __INC_LIB8TION_TRIG_H +#define __INC_LIB8TION_TRIG_H + +///@ingroup lib8tion + +///@defgroup Trig Fast trig functions +/// Fast 8 and 16-bit approximations of sin(x) and cos(x). +/// Don't use these approximations for calculating the +/// trajectory of a rocket to Mars, but they're great +/// for art projects and LED displays. +/// +/// On Arduino/AVR, the 16-bit approximation is more than +/// 10X faster than floating point sin(x) and cos(x), while +/// the 8-bit approximation is more than 20X faster. +///@{ + +#if defined(__AVR__) +#define sin16 sin16_avr +#else +#define sin16 sin16_C +#endif + +/// Fast 16-bit approximation of sin(x). This approximation never varies more than +/// 0.69% from the floating point value you'd get by doing +/// +/// float s = sin(x) * 32767.0; +/// +/// @param theta input angle from 0-65535 +/// @returns sin of theta, value between -32767 to 32767. +LIB8STATIC int16_t sin16_avr( uint16_t theta ) +{ + static const uint8_t data[] = + { 0, 0, 49, 0, 6393%256, 6393/256, 48, 0, + 12539%256, 12539/256, 44, 0, 18204%256, 18204/256, 38, 0, + 23170%256, 23170/256, 31, 0, 27245%256, 27245/256, 23, 0, + 30273%256, 30273/256, 14, 0, 32137%256, 32137/256, 4 /*,0*/ }; + + uint16_t offset = (theta & 0x3FFF); + + // AVR doesn't have a multi-bit shift instruction, + // so if we say "offset >>= 3", gcc makes a tiny loop. + // Inserting empty volatile statements between each + // bit shift forces gcc to unroll the loop. + offset >>= 1; // 0..8191 + asm volatile(""); + offset >>= 1; // 0..4095 + asm volatile(""); + offset >>= 1; // 0..2047 + + if( theta & 0x4000 ) offset = 2047 - offset; + + uint8_t sectionX4; + sectionX4 = offset / 256; + sectionX4 *= 4; + + uint8_t m; + + union { + uint16_t b; + struct { + uint8_t blo; + uint8_t bhi; + }; + } u; + + //in effect u.b = blo + (256 * bhi); + u.blo = data[ sectionX4 ]; + u.bhi = data[ sectionX4 + 1]; + m = data[ sectionX4 + 2]; + + uint8_t secoffset8 = (uint8_t)(offset) / 2; + + uint16_t mx = m * secoffset8; + + int16_t y = mx + u.b; + if( theta & 0x8000 ) y = -y; + + return y; +} + +/// Fast 16-bit approximation of sin(x). This approximation never varies more than +/// 0.69% from the floating point value you'd get by doing +/// +/// float s = sin(x) * 32767.0; +/// +/// @param theta input angle from 0-65535 +/// @returns sin of theta, value between -32767 to 32767. +LIB8STATIC int16_t sin16_C( uint16_t theta ) +{ + static const uint16_t base[] = + { 0, 6393, 12539, 18204, 23170, 27245, 30273, 32137 }; + static const uint8_t slope[] = + { 49, 48, 44, 38, 31, 23, 14, 4 }; + + uint16_t offset = (theta & 0x3FFF) >> 3; // 0..2047 + if( theta & 0x4000 ) offset = 2047 - offset; + + uint8_t section = offset / 256; // 0..7 + uint16_t b = base[section]; + uint8_t m = slope[section]; + + uint8_t secoffset8 = (uint8_t)(offset) / 2; + + uint16_t mx = m * secoffset8; + int16_t y = mx + b; + + if( theta & 0x8000 ) y = -y; + + return y; +} + + +/// Fast 16-bit approximation of cos(x). This approximation never varies more than +/// 0.69% from the floating point value you'd get by doing +/// +/// float s = cos(x) * 32767.0; +/// +/// @param theta input angle from 0-65535 +/// @returns sin of theta, value between -32767 to 32767. +LIB8STATIC int16_t cos16( uint16_t theta) +{ + return sin16( theta + 16384); +} + +/////////////////////////////////////////////////////////////////////// + +// sin8 & cos8 +// Fast 8-bit approximations of sin(x) & cos(x). +// Input angle is an unsigned int from 0-255. +// Output is an unsigned int from 0 to 255. +// +// This approximation can vary to to 2% +// from the floating point value you'd get by doing +// float s = (sin( x ) * 128.0) + 128; +// +// Don't use this approximation for calculating the +// "real" trigonometric calculations, but it's great +// for art projects and LED displays. +// +// On Arduino/AVR, this approximation is more than +// 20X faster than floating point sin(x) and cos(x) + +#if defined(__AVR__) && !defined(LIB8_ATTINY) +#define sin8 sin8_avr +#else +#define sin8 sin8_C +#endif + + +const uint8_t b_m16_interleave[] = { 0, 49, 49, 41, 90, 27, 117, 10 }; + +/// Fast 8-bit approximation of sin(x). This approximation never varies more than +/// 2% from the floating point value you'd get by doing +/// +/// float s = (sin(x) * 128.0) + 128; +/// +/// @param theta input angle from 0-255 +/// @returns sin of theta, value between 0 and 255 +LIB8STATIC uint8_t sin8_avr( uint8_t theta) +{ + uint8_t offset = theta; + + asm volatile( + "sbrc %[theta],6 \n\t" + "com %[offset] \n\t" + : [theta] "+r" (theta), [offset] "+r" (offset) + ); + + offset &= 0x3F; // 0..63 + + uint8_t secoffset = offset & 0x0F; // 0..15 + if( theta & 0x40) secoffset++; + + uint8_t m16; uint8_t b; + + uint8_t section = offset >> 4; // 0..3 + uint8_t s2 = section * 2; + + const uint8_t* p = b_m16_interleave; + p += s2; + b = *p; + p++; + m16 = *p; + + uint8_t mx; + uint8_t xr1; + asm volatile( + "mul %[m16],%[secoffset] \n\t" + "mov %[mx],r0 \n\t" + "mov %[xr1],r1 \n\t" + "eor r1, r1 \n\t" + "swap %[mx] \n\t" + "andi %[mx],0x0F \n\t" + "swap %[xr1] \n\t" + "andi %[xr1], 0xF0 \n\t" + "or %[mx], %[xr1] \n\t" + : [mx] "=d" (mx), [xr1] "=d" (xr1) + : [m16] "d" (m16), [secoffset] "d" (secoffset) + ); + + int8_t y = mx + b; + if( theta & 0x80 ) y = -y; + + y += 128; + + return y; +} + + +/// Fast 8-bit approximation of sin(x). This approximation never varies more than +/// 2% from the floating point value you'd get by doing +/// +/// float s = (sin(x) * 128.0) + 128; +/// +/// @param theta input angle from 0-255 +/// @returns sin of theta, value between 0 and 255 +LIB8STATIC uint8_t sin8_C( uint8_t theta) +{ + uint8_t offset = theta; + if( theta & 0x40 ) { + offset = (uint8_t)255 - offset; + } + offset &= 0x3F; // 0..63 + + uint8_t secoffset = offset & 0x0F; // 0..15 + if( theta & 0x40) secoffset++; + + uint8_t section = offset >> 4; // 0..3 + uint8_t s2 = section * 2; + const uint8_t* p = b_m16_interleave; + p += s2; + uint8_t b = *p; + p++; + uint8_t m16 = *p; + + uint8_t mx = (m16 * secoffset) >> 4; + + int8_t y = mx + b; + if( theta & 0x80 ) y = -y; + + y += 128; + + return y; +} + +/// Fast 8-bit approximation of cos(x). This approximation never varies more than +/// 2% from the floating point value you'd get by doing +/// +/// float s = (cos(x) * 128.0) + 128; +/// +/// @param theta input angle from 0-255 +/// @returns sin of theta, value between 0 and 255 +LIB8STATIC uint8_t cos8( uint8_t theta) +{ + return sin8( theta + 64); +} + +///@} +#endif diff --git a/quantum/audio/song_list.h b/quantum/audio/song_list.h index 369e0b4843..1d4eec7116 100644 --- a/quantum/audio/song_list.h +++ b/quantum/audio/song_list.h @@ -713,4 +713,83 @@ H__NOTE(_B5), H__NOTE(_C6), H__NOTE(_E6), H__NOTE(_G6), WD_NOTE(_G6), Q__NOTE(_C6), B__NOTE(_C6), H__NOTE(_B6), \ Q__NOTE(_C7), BD_NOTE(_C7), +#define ISABELLAS_LULLABY \ + W__NOTE(_BF4), B__NOTE(_D5), W__NOTE(_EF5), B__NOTE(_F5), W__NOTE(_BF5), B__NOTE(_AF5), W__NOTE(_GF5), BD_NOTE(_F5), B__NOTE(_CS5), \ + W__NOTE(_F5), B__NOTE(_C5), W__NOTE(_EF5), BD_NOTE(_BF4), W__NOTE(_AF4), W__NOTE(_BF4), W__NOTE(_F5), W__NOTE(_GF5), \ + WD_NOTE(_AF5), H__NOTE(_FS5), W__NOTE(_F5), B__NOTE(_EF5), W__NOTE(_C6), B__NOTE(_AF5), W__NOTE(_F5), WD_NOTE(_AF5), \ + H__NOTE(_BF5), W__NOTE(_F5), WD_NOTE(_AF5), H__NOTE(_BF5), W__NOTE(_F5), W__NOTE(_EF5), W__NOTE(_BF4), W__NOTE(_AF5), \ + WD_NOTE(_F5), H__NOTE(_F5), H__NOTE(_BF5), H__NOTE(_C6), WD_NOTE(_CS6), H__NOTE(_C6), W__NOTE(_BF5), W__NOTE(_AF5), \ + W__NOTE(_F5), W__NOTE(_EF5), WD_NOTE(_EF5), H__NOTE(_DF5), W__NOTE(_AF5), BD_NOTE(_F5), WD_NOTE(_BF4), H__NOTE(_C5), \ + W__NOTE(_CS5), W__NOTE(_EF5), W__NOTE(_AF4), W__NOTE(_EF5), WD_NOTE(_GF5), H__NOTE(_F5), W__NOTE(_EF5), WD_NOTE(_F5), \ + H__NOTE(_F5), H__NOTE(_BF5), H__NOTE(_C6), WD_NOTE(_CS6), H__NOTE(_C6), W__NOTE(_CS6), W__NOTE(_EF6), W__NOTE(_AF5), \ + W__NOTE(_EF6), WD_NOTE(_GF6), H__NOTE(_F6), W__NOTE(_EF6), B__NOTE(_DF6), H__NOTE(_GF6), H__NOTE(_AF6), BD_NOTE(_DF6), \ + B__NOTE(_BF5), W__NOTE(_F6), BD_NOTE(_C6), W__NOTE(_AF5), WD_NOTE(_EF6), H__NOTE(_DF6), W__NOTE(_C6), B__NOTE(_BF5), + +#define FANTASIE_IMPROMPTU \ + E__NOTE(_GS4), E__NOTE(_A4), E__NOTE(_GS4), E__NOTE(_REST), E__NOTE(_GS4), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_CS5), \ + E__NOTE(_DS5), E__NOTE(_CS5), E__NOTE(_C5), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_GS5), E__NOTE(_GS4), E__NOTE(_A4), \ + E__NOTE(_GS4), E__NOTE(_REST), E__NOTE(_GS4), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_CS5), E__NOTE(_DS5), \ + E__NOTE(_CS5), E__NOTE(_C5), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_GS5), E__NOTE(_A4), E__NOTE(_CS5), E__NOTE(_DS5), \ + E__NOTE(_FS5), E__NOTE(_A5), E__NOTE(_CS6), E__NOTE(_DS6), E__NOTE(_B6), E__NOTE(_A6), E__NOTE(_GS6), E__NOTE(_FS6), \ + E__NOTE(_E6), E__NOTE(_DS6), E__NOTE(_FS6), E__NOTE(_CS6), E__NOTE(_C5), E__NOTE(_DS6), E__NOTE(_A5), E__NOTE(_GS5), \ + E__NOTE(_FS5), E__NOTE(_A5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_FS5), E__NOTE(_CS5), E__NOTE(_C5), E__NOTE(_DS5), \ + E__NOTE(_A4), E__NOTE(_GS4), E__NOTE(_B4), E__NOTE(_A4), E__NOTE(_A4), E__NOTE(_GS4), E__NOTE(_A4), E__NOTE(_GS4), \ + E__NOTE(_REST), E__NOTE(_GS4), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_CS5), E__NOTE(_DS5), E__NOTE(_CS5), \ + E__NOTE(_C5), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_GS5), E__NOTE(_GS4), E__NOTE(_AS4), E__NOTE(_GS4), E__NOTE(_REST), \ + E__NOTE(_GS4), E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_CS5), E__NOTE(_DS5), E__NOTE(_CS5), E__NOTE(_C5), \ + E__NOTE(_CS5), E__NOTE(_E5), E__NOTE(_GS5), E__NOTE(_DS5), E__NOTE(_E5), E__NOTE(_DS5), E__NOTE(_REST), E__NOTE(_DS5), \ + E__NOTE(_B5), E__NOTE(_AS5), E__NOTE(_GS5), E__NOTE(_REST), E__NOTE(_E6), E__NOTE(_DS6), E__NOTE(_CS6), E__NOTE(_B5), \ + E__NOTE(_AS5), E__NOTE(_GS5), E__NOTE(_REST), E__NOTE(_AS5), WD_NOTE(_GS5), + +#define TERRAS_THEME \ + Q__NOTE(_GS5), Q__NOTE(_AS5), Q__NOTE(_B5), Q__NOTE(_EF6), BD_NOTE(_B5), Q__NOTE(_AS5), Q__NOTE(_GS5), W__NOTE(_AS5), \ + BD_NOTE(_DS5), Q__NOTE(_AF5), Q__NOTE(_BF5), Q__NOTE(_B5), Q__NOTE(_DS6), BD_NOTE(_B5), \ + Q__NOTE(_BF5), Q__NOTE(_AF5), W__NOTE(_AS5), BD_NOTE(_DS6), Q__NOTE(_B5), Q__NOTE(_CS6), Q__NOTE(_DS6), \ + Q__NOTE(_FS6), BD_NOTE(_DS6), Q__NOTE(_CS6), Q__NOTE(_B5), W__NOTE(_CS6), BD_NOTE(_FS5), \ + Q__NOTE(_B5), Q__NOTE(_AS5), BD_NOTE(_GS5), Q__NOTE(_B5), Q__NOTE(_AS5), BD_NOTE(_GS5), + +#define RENAI_CIRCULATION \ + Q__NOTE(_E6), Q__NOTE(_B5), HD_NOTE(_CS6), HD_NOTE(_CS6), H__NOTE(_B5), HD_NOTE(_E6), HD_NOTE(_E6), Q__NOTE(_E6), Q__NOTE(_B5), \ + HD_NOTE(_CS6), HD_NOTE(_CS6), H__NOTE(_B5), HD_NOTE(_E6), HD_NOTE(_GS6), Q__NOTE(_E6), Q__NOTE(_B5), HD_NOTE(_CS6), \ + H__NOTE(_CS6), Q__NOTE(_CS6), H__NOTE(_B5), HD_NOTE(_E6), H__NOTE(_E6), Q__NOTE(_E6), H__NOTE(_FS6), HD_NOTE(_E6), \ + H__NOTE(_E6), Q__NOTE(_E6), H__NOTE(_CS6), WD_NOTE(_GS6), HD_NOTE(_E6), H__NOTE(_E6), Q__NOTE(_FS6), H__NOTE(_G6), \ + HD_NOTE(_GS6), HD_NOTE(_E6), Q__NOTE(_B5), Q__NOTE(_CS6), HD_NOTE(_E6), H__NOTE(_E6), Q__NOTE(_FS6), H__NOTE(_G6), \ + HD_NOTE(_GS6), HD_NOTE(_E6), H__NOTE(_CS6), H__NOTE(_E6), Q__NOTE(_CS6), HD_NOTE(_E6), H__NOTE(_CS6), H__NOTE(_E6), \ + Q__NOTE(_CS6), HD_NOTE(_E6), H__NOTE(_E6), Q__NOTE(_A6), H__NOTE(_GS6), HD_NOTE(_E6), H__NOTE(_FS6), WD_NOTE(_E6), \ + H__NOTE(_GS6), H__NOTE(_A6), H__NOTE(_GS6), H__NOTE(_A6), W__NOTE(_B6), H__NOTE(_GS6), H__NOTE(_A6), H__NOTE(_GS6), \ + H__NOTE(_A6), W__NOTE(_B6), H__NOTE(_B6), H__NOTE(_A6), H__NOTE(_GS6), H__NOTE(_A6), Q__NOTE(_GS6), H__NOTE(_E6), \ + H__NOTE(_E6), Q__NOTE(_E6), H__NOTE(_CS6), Q__NOTE(_GS6), H__NOTE(_E6), H__NOTE(_E6), Q__NOTE(_E6), H__NOTE(_CS6), \ + Q__NOTE(_E6), H__NOTE(_E6), H__NOTE(_E6), Q__NOTE(_E6), H__NOTE(_FS6), WD_NOTE(_E6), W__NOTE(_B6), W__NOTE(_GS6), \ + W__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_GS6), H__NOTE(_FS6), H__NOTE(_E6), H__NOTE(_FS6), B__NOTE(_GS6), H__NOTE(_GS6), \ + W__NOTE(_CS7), W__NOTE(_GS6), W__NOTE(_E6), H__NOTE(_GS6), H__NOTE(_GS6), HD_NOTE(_E6), H__NOTE(_E6), Q__NOTE(_E6), \ + H__NOTE(_FS6), WD_NOTE(_E6), + +#define PLATINUM_DISCO \ + H__NOTE(_DS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_DS6), H__NOTE(_FS6), W__NOTE(_GS6), H__NOTE(_DS6), H__NOTE(_FS6), \ + H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_CS6), H__NOTE(_FS6), WD_NOTE(_FS6), H__NOTE(_CS6), W__NOTE(_DS6), H__NOTE(_FS6), \ + H__NOTE(_AS6), W__NOTE(_GS6), H__NOTE(_FS6), H__NOTE(_GS6), Q__NOTE(_AS6), Q__NOTE(_CS7), Q__NOTE(_GS6), Q__NOTE(_AS6), \ + Q__NOTE(_FS6), Q__NOTE(_GS6), Q__NOTE(_DS6), Q__NOTE(_FS6), Q__NOTE(_CS6), Q__NOTE(_DS6), Q__NOTE(_AS5), Q__NOTE(_CS6), \ + H__NOTE(_DS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_DS6), H__NOTE(_FS6), W__NOTE(_GS6), H__NOTE(_DS6), \ + H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_CS7), H__NOTE(_GS6), WD_NOTE(_FS6), H__NOTE(_CS6), W__NOTE(_DS6), \ + H__NOTE(_FS6), H__NOTE(_AS6), WD_NOTE(_GS6), H__NOTE(_FS6), Q__NOTE(_FS6), Q__NOTE(_GS5), Q__NOTE(_AS5), Q__NOTE(_CS6), \ + Q__NOTE(_FS6), Q__NOTE(_GS6), Q__NOTE(_AS6), Q__NOTE(_CS7), WD_NOTE(_FS7), H__NOTE(_CS6), WD_NOTE(_DS6), H__NOTE(_CS6), \ + WD_NOTE(_DS6), H__NOTE(_CS6), H__NOTE(_DS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_AS6), WD_NOTE(_GS6), H__NOTE(_FS6), \ + WD_NOTE(_GS6), H__NOTE(_FS6), WD_NOTE(_GS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_DS6), H__NOTE(_FS6), \ + WD_NOTE(_FS6), H__NOTE(_CS6), WD_NOTE(_DS6), H__NOTE(_CS6), WD_NOTE(_DS6), H__NOTE(_CS6), H__NOTE(_DS6), H__NOTE(_FS6), \ + H__NOTE(_GS6), H__NOTE(_AS6), H__NOTE(_CS7), H__NOTE(_AS6), H__NOTE(_GS6), H__NOTE(_FS6), H__NOTE(_DS6), W__NOTE(_FS6), \ + H__NOTE(_CS6), H__NOTE(_DS6), W__NOTE(_FS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_FS6), H__NOTE(_GS6), H__NOTE(_FS6), \ + B__NOTE(_FS6), + +#define NOCTURNE_OP_9_NO_1 \ + H__NOTE(_BF5), H__NOTE(_C6), H__NOTE(_DF6), H__NOTE(_A5), H__NOTE(_BF5), H__NOTE(_GF5), W__NOTE(_F5), W__NOTE(_F5), W__NOTE(_F5), \ + W__NOTE(_F5), H__NOTE(_GF5), H__NOTE(_F5), H__NOTE(_EF5), H__NOTE(_C5), B__NOTE(_DF5), W__NOTE(_BF4), Q__NOTE(_BF5), \ + Q__NOTE(_C6), Q__NOTE(_DF6), Q__NOTE(_A5), Q__NOTE(_BF5), Q__NOTE(_A5), Q__NOTE(_GS5), Q__NOTE(_A5), Q__NOTE(_C6), \ + Q__NOTE(_BF5), Q__NOTE(_GF5), Q__NOTE(_F5), Q__NOTE(_GF5), Q__NOTE(_E5), Q__NOTE(_F5), Q__NOTE(_BF5), Q__NOTE(_A5), \ + Q__NOTE(_AF5), Q__NOTE(_G5), Q__NOTE(_GF5), Q__NOTE(_F5), Q__NOTE(_E5), Q__NOTE(_EF5), Q__NOTE(_D5), Q__NOTE(_DF5), \ + Q__NOTE(_C5), Q__NOTE(_DF5), Q__NOTE(_C5), Q__NOTE(_B4), Q__NOTE(_C5), Q__NOTE(_F5), Q__NOTE(_E5), Q__NOTE(_EF5), \ + B__NOTE(_DF5), W__NOTE(_BF4), W__NOTE(_BF5), W__NOTE(_BF5), W__NOTE(_BF5), BD_NOTE(_AF5), W__NOTE(_DF5), H__NOTE(_BF4), \ + H__NOTE(_C5), H__NOTE(_DF5), H__NOTE(_GF5), H__NOTE(_GF5), BD_NOTE(_F5), W__NOTE(_EF5), H__NOTE(_F5), H__NOTE(_EF5), \ + H__NOTE(_DF5), H__NOTE(_A4), B__NOTE(_AF4), W__NOTE(_DF5), W__NOTE(_EF5), H__NOTE(_F5), H__NOTE(_EF5), H__NOTE(_DF5), \ + H__NOTE(_EF5), BD_NOTE(_F5), + #endif diff --git a/quantum/color.c b/quantum/color.c index 8ede053e71..c49877592e 100644 --- a/quantum/color.c +++ b/quantum/color.c @@ -78,9 +78,11 @@ RGB hsv_to_rgb( HSV hsv ) break; } +#ifdef USE_CIE1931_CURVE rgb.r = pgm_read_byte( &CIE1931_CURVE[rgb.r] ); rgb.g = pgm_read_byte( &CIE1931_CURVE[rgb.g] ); rgb.b = pgm_read_byte( &CIE1931_CURVE[rgb.b] ); +#endif return rgb; } diff --git a/quantum/debounce/eager_pr.c b/quantum/debounce/eager_pr.c new file mode 100644 index 0000000000..9eb9480a79 --- /dev/null +++ b/quantum/debounce/eager_pr.c @@ -0,0 +1,100 @@ +/* +Copyright 2019 Alex Ong +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* +Basic per-row algorithm. Uses an 8-bit counter per row. +After pressing a key, it immediately changes state, and sets a counter. +No further inputs are accepted until DEBOUNCE milliseconds have occurred. +*/ + +#include "matrix.h" +#include "timer.h" +#include "quantum.h" +#include + +#ifndef DEBOUNCE + #define DEBOUNCE 5 +#endif + + +#define debounce_counter_t uint8_t + +static debounce_counter_t *debounce_counters; + +#define DEBOUNCE_ELAPSED 251 +#define MAX_DEBOUNCE (DEBOUNCE_ELAPSED - 1) + +void update_debounce_counters(uint8_t num_rows, uint8_t current_time); +void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time); + +//we use num_rows rather than MATRIX_ROWS to support split keyboards +void debounce_init(uint8_t num_rows) +{ + debounce_counters = (debounce_counter_t*)malloc(num_rows*sizeof(debounce_counter_t)); + for (uint8_t r = 0; r < num_rows; r++) + { + debounce_counters[r] = DEBOUNCE_ELAPSED; + } +} + +void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) +{ + uint8_t current_time = timer_read() % MAX_DEBOUNCE; + update_debounce_counters(num_rows, current_time); + transfer_matrix_values(raw, cooked, num_rows, current_time); +} + +//If the current time is > debounce counter, set the counter to enable input. +void update_debounce_counters(uint8_t num_rows, uint8_t current_time) +{ + debounce_counter_t *debounce_pointer = debounce_counters; + for (uint8_t row = 0; row < num_rows; row++) + { + if (*debounce_pointer != DEBOUNCE_ELAPSED) + { + if (TIMER_DIFF(current_time, *debounce_pointer, MAX_DEBOUNCE) >= DEBOUNCE) { + *debounce_pointer = DEBOUNCE_ELAPSED; + } + } + debounce_pointer++; + } +} + +// upload from raw_matrix to final matrix; +void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) +{ + debounce_counter_t *debounce_pointer = debounce_counters; + for (uint8_t row = 0; row < num_rows; row++) + { + matrix_row_t existing_row = cooked[row]; + matrix_row_t raw_row = raw[row]; + + //determine new value basd on debounce pointer + raw value + if (*debounce_pointer == DEBOUNCE_ELAPSED && + (existing_row != raw_row)) + { + *debounce_pointer = current_time; + existing_row = raw_row; + } + cooked[row] = existing_row; + + debounce_pointer++; + } +} + +bool debounce_active(void) +{ + return true; +} + diff --git a/quantum/debounce/readme.md b/quantum/debounce/readme.md index 5b318d845e..f77f78c764 100644 --- a/quantum/debounce/readme.md +++ b/quantum/debounce/readme.md @@ -22,7 +22,7 @@ Here are a few that could be implemented: sym_g.c sym_pk.c sym_pr.c -sym_pr_cycles.c //currently used in ergo-dox +sym_pr_cycles.c eager_g.c eager_pk.c eager_pr.c //could be used in ergo-dox! diff --git a/quantum/encoder.c b/quantum/encoder.c index 6629a098b8..ddf6234ab8 100644 --- a/quantum/encoder.c +++ b/quantum/encoder.c @@ -17,6 +17,10 @@ #include "encoder.h" +// for memcpy +#include + + #ifndef ENCODER_RESOLUTION #define ENCODER_RESOLUTION 4 #endif @@ -35,7 +39,13 @@ static pin_t encoders_pad_b[NUMBER_OF_ENCODERS] = ENCODERS_PAD_B; static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 }; static uint8_t encoder_state[NUMBER_OF_ENCODERS] = {0}; + +#ifdef SPLIT_KEYBOARD +// slave half encoders come over as second set of encoders +static int8_t encoder_value[NUMBER_OF_ENCODERS * 2] = {0}; +#else static int8_t encoder_value[NUMBER_OF_ENCODERS] = {0}; +#endif __attribute__ ((weak)) void encoder_update_user(int8_t index, bool clockwise) { } @@ -60,11 +70,30 @@ void encoder_read(void) { encoder_state[i] |= (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1); encoder_value[i] += encoder_LUT[encoder_state[i] & 0xF]; if (encoder_value[i] >= ENCODER_RESOLUTION) { - encoder_update_kb(i, COUNTRECLOCKWISE); + encoder_update_kb(i, false); } if (encoder_value[i] <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise - encoder_update_kb(i, CLOCKWISE); + encoder_update_kb(i, true); } encoder_value[i] %= ENCODER_RESOLUTION; } } + +#ifdef SPLIT_KEYBOARD +void encoder_state_raw(uint8_t* slave_state) { + memcpy(slave_state, encoder_state, sizeof(encoder_state)); +} + +void encoder_update_raw(uint8_t* slave_state) { + for (int i = 0; i < NUMBER_OF_ENCODERS; i++) { + encoder_value[NUMBER_OF_ENCODERS + i] += encoder_LUT[slave_state[i] & 0xF]; + if (encoder_value[NUMBER_OF_ENCODERS + i] >= ENCODER_RESOLUTION) { + encoder_update_kb(NUMBER_OF_ENCODERS + i, false); + } + if (encoder_value[NUMBER_OF_ENCODERS + i] <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise + encoder_update_kb(NUMBER_OF_ENCODERS + i, true); + } + encoder_value[NUMBER_OF_ENCODERS + i] %= ENCODER_RESOLUTION; + } +} +#endif diff --git a/quantum/encoder.h b/quantum/encoder.h index 2024fa303f..ec09a8cc47 100644 --- a/quantum/encoder.h +++ b/quantum/encoder.h @@ -19,11 +19,13 @@ #include "quantum.h" -#define COUNTRECLOCKWISE 0 -#define CLOCKWISE 1 - void encoder_init(void); void encoder_read(void); void encoder_update_kb(int8_t index, bool clockwise); void encoder_update_user(int8_t index, bool clockwise); + +#ifdef SPLIT_KEYBOARD +void encoder_state_raw(uint8_t* slave_state); +void encoder_update_raw(uint8_t* slave_state); +#endif diff --git a/quantum/quantum.c b/quantum/quantum.c index 8316d1f06a..8c928441c5 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -274,10 +274,10 @@ bool process_record_quantum(keyrecord_t *record) { #ifdef HAPTIC_ENABLE process_haptic(keycode, record) && #endif //HAPTIC_ENABLE - process_record_kb(keycode, record) && - #if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_KEYPRESSES) + #if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_KEYREACTIVE_ENABLED) process_rgb_matrix(keycode, record) && #endif + process_record_kb(keycode, record) && #if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED) process_midi(keycode, record) && #endif @@ -1049,12 +1049,6 @@ void matrix_init_quantum() { matrix_init_kb(); } -uint8_t rgb_matrix_task_counter = 0; - -#ifndef RGB_MATRIX_SKIP_FRAMES - #define RGB_MATRIX_SKIP_FRAMES 1 -#endif - void matrix_scan_quantum() { #if defined(AUDIO_ENABLE) && !defined(NO_MUSIC_MODE) matrix_scan_music(); @@ -1078,10 +1072,6 @@ void matrix_scan_quantum() { #ifdef RGB_MATRIX_ENABLE rgb_matrix_task(); - if (rgb_matrix_task_counter == 0) { - rgb_matrix_update_pwm_buffers(); - } - rgb_matrix_task_counter = ((rgb_matrix_task_counter + 1) % (RGB_MATRIX_SKIP_FRAMES + 1)); #endif #ifdef ENCODER_ENABLE diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c index 56a97e3c7d..413e5777fc 100644 --- a/quantum/rgb_matrix.c +++ b/quantum/rgb_matrix.c @@ -24,62 +24,80 @@ #include #include -rgb_config_t rgb_matrix_config; +#include "lib/lib8tion/lib8tion.h" + +#include "rgb_matrix_animations/solid_color_anim.h" +#include "rgb_matrix_animations/alpha_mods_anim.h" +#include "rgb_matrix_animations/dual_beacon_anim.h" +#include "rgb_matrix_animations/gradient_up_down_anim.h" +#include "rgb_matrix_animations/raindrops_anim.h" +#include "rgb_matrix_animations/cycle_all_anim.h" +#include "rgb_matrix_animations/cycle_left_right_anim.h" +#include "rgb_matrix_animations/cycle_up_down_anim.h" +#include "rgb_matrix_animations/rainbow_beacon_anim.h" +#include "rgb_matrix_animations/rainbow_pinwheels_anim.h" +#include "rgb_matrix_animations/rainbow_moving_chevron_anim.h" +#include "rgb_matrix_animations/jellybean_raindrops_anim.h" +#include "rgb_matrix_animations/digital_rain_anim.h" +#include "rgb_matrix_animations/solid_reactive_simple_anim.h" +#include "rgb_matrix_animations/solid_reactive_anim.h" +#include "rgb_matrix_animations/splash_anim.h" +#include "rgb_matrix_animations/solid_splash_anim.h" +#include "rgb_matrix_animations/breathing_anim.h" -#ifndef MAX - #define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) +#ifndef RGB_DISABLE_AFTER_TIMEOUT + #define RGB_DISABLE_AFTER_TIMEOUT 0 #endif -#ifndef MIN - #define MIN(a,b) ((a) < (b)? (a): (b)) +#ifndef RGB_DISABLE_WHEN_USB_SUSPENDED + #define RGB_DISABLE_WHEN_USB_SUSPENDED false #endif -#ifndef RGB_DISABLE_AFTER_TIMEOUT - #define RGB_DISABLE_AFTER_TIMEOUT 0 +#ifndef EECONFIG_RGB_MATRIX + #define EECONFIG_RGB_MATRIX EECONFIG_RGBLIGHT #endif -#ifndef RGB_DISABLE_WHEN_USB_SUSPENDED - #define RGB_DISABLE_WHEN_USB_SUSPENDED false +#if !defined(RGB_MATRIX_MAXIMUM_BRIGHTNESS) || RGB_MATRIX_MAXIMUM_BRIGHTNESS > UINT8_MAX + #undef RGB_MATRIX_MAXIMUM_BRIGHTNESS + #define RGB_MATRIX_MAXIMUM_BRIGHTNESS UINT8_MAX #endif -#ifndef EECONFIG_RGB_MATRIX - #define EECONFIG_RGB_MATRIX EECONFIG_RGBLIGHT +#if !defined(RGB_MATRIX_HUE_STEP) + #define RGB_MATRIX_HUE_STEP 8 #endif -#if !defined(RGB_MATRIX_MAXIMUM_BRIGHTNESS) || RGB_MATRIX_MAXIMUM_BRIGHTNESS > 255 - #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 +#if !defined(RGB_MATRIX_SAT_STEP) + #define RGB_MATRIX_SAT_STEP 16 #endif -#ifndef RGB_DIGITAL_RAIN_DROPS - // lower the number for denser effect/wider keyboard - #define RGB_DIGITAL_RAIN_DROPS 24 +#if !defined(RGB_MATRIX_VAL_STEP) + #define RGB_MATRIX_VAL_STEP 16 #endif -#if !defined(DISABLE_RGB_MATRIX_RAINDROPS) || !defined(DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS) || !defined(DISABLE_RGB_MATRIX_DIGITAL_RAIN) - #define TRACK_PREVIOUS_EFFECT +#if !defined(RGB_MATRIX_SPD_STEP) + #define RGB_MATRIX_SPD_STEP 16 #endif bool g_suspend_state = false; -// Global tick at 20 Hz -uint32_t g_tick = 0; - -// Ticks since this key was last hit. -uint8_t g_key_hit[DRIVER_LED_TOTAL]; +rgb_config_t rgb_matrix_config; -// Ticks since any key was last hit. -uint32_t g_any_key_hit = 0; +rgb_counters_t g_rgb_counters; +static uint32_t rgb_counters_buffer; -#ifndef PI -#define PI 3.14159265 -#endif +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED + last_hit_t g_last_hit_tracker; + static last_hit_t last_hit_buffer; +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED uint32_t eeconfig_read_rgb_matrix(void) { return eeprom_read_dword(EECONFIG_RGB_MATRIX); } + void eeconfig_update_rgb_matrix(uint32_t val) { eeprom_update_dword(EECONFIG_RGB_MATRIX, val); } + void eeconfig_update_rgb_matrix_default(void) { dprintf("eeconfig_update_rgb_matrix_default\n"); rgb_matrix_config.enable = 1; @@ -90,11 +108,12 @@ void eeconfig_update_rgb_matrix_default(void) { rgb_matrix_config.mode = RGB_MATRIX_SOLID_COLOR; #endif rgb_matrix_config.hue = 0; - rgb_matrix_config.sat = 255; + rgb_matrix_config.sat = UINT8_MAX; rgb_matrix_config.val = RGB_MATRIX_MAXIMUM_BRIGHTNESS; - rgb_matrix_config.speed = 0; + rgb_matrix_config.speed = UINT8_MAX / 2; eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } + void eeconfig_debug_rgb_matrix(void) { dprintf("rgb_matrix_config eprom\n"); dprintf("rgb_matrix_config.enable = %d\n", rgb_matrix_config.enable); @@ -105,710 +124,347 @@ void eeconfig_debug_rgb_matrix(void) { dprintf("rgb_matrix_config.speed = %d\n", rgb_matrix_config.speed); } -// Last led hit -#define LED_HITS_TO_REMEMBER 8 -uint8_t g_last_led_hit[LED_HITS_TO_REMEMBER] = {255}; -uint8_t g_last_led_count = 0; - -void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led_i, uint8_t *led_count) { - rgb_led led; - *led_count = 0; - - for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { - // map_index_to_led(i, &led); - led = g_rgb_leds[i]; - if (row == led.matrix_co.row && column == led.matrix_co.col) { - led_i[*led_count] = i; - (*led_count)++; - } +uint8_t rgb_matrix_map_row_column_to_led(uint8_t row, uint8_t column, uint8_t *led_i) { + // TODO: This is kinda expensive, fix this soonish + uint8_t led_count = 0; + for (uint8_t i = 0; i < DRIVER_LED_TOTAL && led_count < LED_HITS_TO_REMEMBER; i++) { + matrix_co_t matrix_co = g_rgb_leds[i].matrix_co; + if (row == matrix_co.row && column == matrix_co.col) { + led_i[led_count] = i; + led_count++; } + } + return led_count; } void rgb_matrix_update_pwm_buffers(void) { - rgb_matrix_driver.flush(); + rgb_matrix_driver.flush(); } void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) { - rgb_matrix_driver.set_color(index, red, green, blue); +#ifdef RGB_MATRIX_EXTRA_TOG + const bool is_key = g_rgb_leds[index].matrix_co.raw != 0xff; + if ( + (rgb_matrix_config.enable == RGB_ZONE_KEYS && !is_key) || + (rgb_matrix_config.enable == RGB_ZONE_UNDER && is_key) + ) { + rgb_matrix_driver.set_color(index, 0, 0, 0); + return; + } +#endif + + rgb_matrix_driver.set_color(index, red, green, blue); } void rgb_matrix_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) { - rgb_matrix_driver.set_color_all(red, green, blue); +#ifdef RGB_MATRIX_EXTRA_TOG + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + rgb_matrix_set_color(i, red, green, blue); + } +#else + rgb_matrix_driver.set_color_all(red, green, blue); +#endif } bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record) { - if ( record->event.pressed ) { - uint8_t led[8], led_count; - map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count); - if (led_count > 0) { - for (uint8_t i = LED_HITS_TO_REMEMBER; i > 1; i--) { - g_last_led_hit[i - 1] = g_last_led_hit[i - 2]; - } - g_last_led_hit[0] = led[0]; - g_last_led_count = MIN(LED_HITS_TO_REMEMBER, g_last_led_count + 1); - } - for(uint8_t i = 0; i < led_count; i++) - g_key_hit[led[i]] = 0; - g_any_key_hit = 0; - } else { - #ifdef RGB_MATRIX_KEYRELEASES - uint8_t led[8], led_count; - map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count); - for(uint8_t i = 0; i < led_count; i++) - g_key_hit[led[i]] = 255; - - g_any_key_hit = 255; - #endif - } - return true; -} +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED + uint8_t led[LED_HITS_TO_REMEMBER]; + uint8_t led_count = 0; + +#if defined(RGB_MATRIX_KEYRELEASES) + if (!record->event.pressed) { + led_count = rgb_matrix_map_row_column_to_led(record->event.key.row, record->event.key.col, led); + g_rgb_counters.any_key_hit = 0; + } +#elif defined(RGB_MATRIX_KEYPRESSES) + if (record->event.pressed) { + led_count = rgb_matrix_map_row_column_to_led(record->event.key.row, record->event.key.col, led); + g_rgb_counters.any_key_hit = 0; + } +#endif // defined(RGB_MATRIX_KEYRELEASES) + + if (last_hit_buffer.count + led_count > LED_HITS_TO_REMEMBER) { + memcpy(&last_hit_buffer.x[0], &last_hit_buffer.x[led_count], LED_HITS_TO_REMEMBER - led_count); + memcpy(&last_hit_buffer.y[0], &last_hit_buffer.y[led_count], LED_HITS_TO_REMEMBER - led_count); + memcpy(&last_hit_buffer.tick[0], &last_hit_buffer.tick[led_count], (LED_HITS_TO_REMEMBER - led_count) * 2); // 16 bit + memcpy(&last_hit_buffer.index[0], &last_hit_buffer.index[led_count], LED_HITS_TO_REMEMBER - led_count); + last_hit_buffer.count--; + } -void rgb_matrix_set_suspend_state(bool state) { - g_suspend_state = state; + for(uint8_t i = 0; i < led_count; i++) { + uint8_t index = last_hit_buffer.count; + last_hit_buffer.x[index] = g_rgb_leds[led[i]].point.x; + last_hit_buffer.y[index] = g_rgb_leds[led[i]].point.y; + last_hit_buffer.index[index] = led[i]; + last_hit_buffer.tick[index] = 0; + last_hit_buffer.count++; + } +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED + return true; } void rgb_matrix_test(void) { - // Mask out bits 4 and 5 - // Increase the factor to make the test animation slower (and reduce to make it faster) - uint8_t factor = 10; - switch ( (g_tick & (0b11 << factor)) >> factor ) - { - case 0: - { - rgb_matrix_set_color_all( 20, 0, 0 ); - break; - } - case 1: - { - rgb_matrix_set_color_all( 0, 20, 0 ); - break; - } - case 2: - { - rgb_matrix_set_color_all( 0, 0, 20 ); - break; - } - case 3: - { - rgb_matrix_set_color_all( 20, 20, 20 ); - break; - } - } -} - -// All LEDs off -void rgb_matrix_all_off(void) { - rgb_matrix_set_color_all( 0, 0, 0 ); -} - -// Solid color -void rgb_matrix_solid_color(void) { - HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; - RGB rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color_all( rgb.r, rgb.g, rgb.b ); -} - -void rgb_matrix_solid_reactive(void) { - // Relies on hue being 8-bit and wrapping - for ( int i=0; i 127 ) - { - deltaH -= 256; - } - else if ( deltaH < -127 ) - { - deltaH += 256; + // Mask out bits 4 and 5 + // Increase the factor to make the test animation slower (and reduce to make it faster) + uint8_t factor = 10; + switch ( (g_rgb_counters.tick & (0b11 << factor)) >> factor ) + { + case 0: { + rgb_matrix_set_color_all( 20, 0, 0 ); + break; } - // Divide delta by 4, this gives the delta per row - deltaH /= 4; - - int16_t s1 = rgb_matrix_config.sat; - int16_t s2 = rgb_matrix_config.hue; - int16_t deltaS = ( s2 - s1 ) / 4; - - HSV hsv = { .h = 0, .s = 255, .v = rgb_matrix_config.val }; - RGB rgb; - Point point; - for ( int i=0; i>4); - // Relies on hue being 8-bit and wrapping - hsv.h = rgb_matrix_config.hue + ( deltaH * y ); - hsv.s = rgb_matrix_config.sat + ( deltaS * y ); - rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); + case 1: { + rgb_matrix_set_color_all( 0, 20, 0 ); + break; } -} - -void rgb_matrix_raindrops(bool initialize) { - int16_t h1 = rgb_matrix_config.hue; - int16_t h2 = (rgb_matrix_config.hue + 180) % 360; - int16_t deltaH = h2 - h1; - deltaH /= 4; - - // Take the shortest path between hues - if ( deltaH > 127 ) - { - deltaH -= 256; - } - else if ( deltaH < -127 ) - { - deltaH += 256; - } - - int16_t s1 = rgb_matrix_config.sat; - int16_t s2 = rgb_matrix_config.sat; - int16_t deltaS = ( s2 - s1 ) / 4; - - HSV hsv; - RGB rgb; - - // Change one LED every tick, make sure speed is not 0 - uint8_t led_to_change = ( g_tick & ( 0x0A / (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed) ) ) == 0 ? rand() % (DRIVER_LED_TOTAL) : 255; - - for ( int i=0; iinit) { + return false; + } -void rgb_matrix_dual_beacon(void) { - HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; - RGB rgb; - Point point; - double cos_value = cos(g_tick * PI / 128) / 32; - double sin_value = sin(g_tick * PI / 128) / 112; - for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { - point = g_rgb_leds[i].point; - hsv.h = ((point.y - 32.0)* cos_value + (point.x - 112.0) * sin_value) * (180) + rgb_matrix_config.hue; - rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); - } + RGB_MATRIX_USE_LIMITS(led_min, led_max); + for (uint8_t i = led_min; i < led_max; i++) { + rgb_matrix_set_color(i, 0, 0, 0); + } + return led_max < DRIVER_LED_TOTAL; } -void rgb_matrix_rainbow_beacon(void) { - HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; - RGB rgb; - Point point; - double cos_value = cos(g_tick * PI / 128); - double sin_value = sin(g_tick * PI / 128); - for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { - point = g_rgb_leds[i].point; - hsv.h = (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (point.y - 32.0)* cos_value + (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (point.x - 112.0) * sin_value + rgb_matrix_config.hue; - rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); - } -} +static uint8_t rgb_last_enable = UINT8_MAX; +static uint8_t rgb_last_effect = UINT8_MAX; +static effect_params_t rgb_effect_params = { 0, 0 }; +static rgb_task_states rgb_task_state = SYNCING; -void rgb_matrix_rainbow_pinwheels(void) { - HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; - RGB rgb; - Point point; - double cos_value = cos(g_tick * PI / 128); - double sin_value = sin(g_tick * PI / 128); - for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { - point = g_rgb_leds[i].point; - hsv.h = (2 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (point.y - 32.0)* cos_value + (2 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (66 - abs(point.x - 112.0)) * sin_value + rgb_matrix_config.hue; - rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); +static void rgb_task_timers(void) { + // Update double buffer timers + uint16_t deltaTime = timer_elapsed32(rgb_counters_buffer); + rgb_counters_buffer = timer_read32(); + if (g_rgb_counters.any_key_hit < UINT32_MAX) { + if (UINT32_MAX - deltaTime < g_rgb_counters.any_key_hit) { + g_rgb_counters.any_key_hit = UINT32_MAX; + } else { + g_rgb_counters.any_key_hit += deltaTime; } -} + } -void rgb_matrix_rainbow_moving_chevron(void) { - HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; - RGB rgb; - Point point; - uint8_t r = 128; - double cos_value = cos(r * PI / 128); - double sin_value = sin(r * PI / 128); - double multiplier = (g_tick / 256.0 * 224); - for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { - point = g_rgb_leds[i].point; - hsv.h = (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * abs(point.y - 32.0)* sin_value + (1.5 * (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed)) * (point.x - multiplier) * cos_value + rgb_matrix_config.hue; - rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); + // Update double buffer last hit timers +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED + uint8_t count = last_hit_buffer.count; + for (uint8_t i = 0; i < count; ++i) { + if (UINT16_MAX - deltaTime < last_hit_buffer.tick[i]) { + last_hit_buffer.count--; + continue; } -} - - -void rgb_matrix_jellybean_raindrops( bool initialize ) { - HSV hsv; - RGB rgb; + last_hit_buffer.tick[i] += deltaTime; + } +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED +} + +static void rgb_task_sync(void) { + // next task + if (timer_elapsed32(g_rgb_counters.tick) >= RGB_MATRIX_LED_FLUSH_LIMIT) + rgb_task_state = STARTING; +} + +static void rgb_task_start(void) { + // reset iter + rgb_effect_params.iter = 0; + + // update double buffers + g_rgb_counters.tick = rgb_counters_buffer; +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED + g_last_hit_tracker = last_hit_buffer; +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED + + // next task + rgb_task_state = RENDERING; +} + +static void rgb_task_render(uint8_t effect) { + bool rendering = false; + rgb_effect_params.init = (effect != rgb_last_effect) || (rgb_matrix_config.enable != rgb_last_enable); + + // each effect can opt to do calculations + // and/or request PWM buffer updates. + switch (effect) { + case RGB_MATRIX_NONE: + rendering = rgb_matrix_none(&rgb_effect_params); + break; + + case RGB_MATRIX_SOLID_COLOR: + rendering = rgb_matrix_solid_color(&rgb_effect_params); // Max 1ms Avg 0ms + break; +#ifndef DISABLE_RGB_MATRIX_ALPHAS_MODS + case RGB_MATRIX_ALPHAS_MODS: + rendering = rgb_matrix_alphas_mods(&rgb_effect_params); // Max 2ms Avg 1ms + break; +#endif // DISABLE_RGB_MATRIX_ALPHAS_MODS +#ifndef DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN + case RGB_MATRIX_GRADIENT_UP_DOWN: + rendering = rgb_matrix_gradient_up_down(&rgb_effect_params); // Max 4ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#ifndef DISABLE_RGB_MATRIX_BREATHING + case RGB_MATRIX_BREATHING: + rendering = rgb_matrix_breathing(&rgb_effect_params); // Max 1ms Avg 0ms + break; +#endif // DISABLE_RGB_MATRIX_BREATHING +#ifndef DISABLE_RGB_MATRIX_CYCLE_ALL + case RGB_MATRIX_CYCLE_ALL: + rendering = rgb_matrix_cycle_all(&rgb_effect_params); // Max 4ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_CYCLE_ALL +#ifndef DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT + case RGB_MATRIX_CYCLE_LEFT_RIGHT: + rendering = rgb_matrix_cycle_left_right(&rgb_effect_params); // Max 4ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#ifndef DISABLE_RGB_MATRIX_CYCLE_UP_DOWN + case RGB_MATRIX_CYCLE_UP_DOWN: + rendering = rgb_matrix_cycle_up_down(&rgb_effect_params); // Max 4ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +#ifndef DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON + case RGB_MATRIX_RAINBOW_MOVING_CHEVRON: + rendering = rgb_matrix_rainbow_moving_chevron(&rgb_effect_params); // Max 4ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#ifndef DISABLE_RGB_MATRIX_DUAL_BEACON + case RGB_MATRIX_DUAL_BEACON: + rendering = rgb_matrix_dual_beacon(&rgb_effect_params); // Max 4ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_DUAL_BEACON +#ifndef DISABLE_RGB_MATRIX_RAINBOW_BEACON + case RGB_MATRIX_RAINBOW_BEACON: + rendering = rgb_matrix_rainbow_beacon(&rgb_effect_params); // Max 4ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_RAINBOW_BEACON +#ifndef DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS + case RGB_MATRIX_RAINBOW_PINWHEELS: + rendering = rgb_matrix_rainbow_pinwheels(&rgb_effect_params); // Max 4ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#ifndef DISABLE_RGB_MATRIX_RAINDROPS + case RGB_MATRIX_RAINDROPS: + rendering = rgb_matrix_raindrops(&rgb_effect_params); // Max 1ms Avg 0ms + break; +#endif // DISABLE_RGB_MATRIX_RAINDROPS +#ifndef DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS + case RGB_MATRIX_JELLYBEAN_RAINDROPS: + rendering = rgb_matrix_jellybean_raindrops(&rgb_effect_params); // Max 1ms Avg 0ms + break; +#endif // DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#ifndef DISABLE_RGB_MATRIX_DIGITAL_RAIN + case RGB_MATRIX_DIGITAL_RAIN: + rendering = rgb_matrix_digital_rain(&rgb_effect_params); // Max 9ms Avg 8ms | this is expensive, fix it + break; +#endif // DISABLE_RGB_MATRIX_DIGITAL_RAIN +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE + case RGB_MATRIX_SOLID_REACTIVE_SIMPLE: + rendering = rgb_matrix_solid_reactive_simple(&rgb_effect_params);// Max 4ms Avg 3ms + break; +#endif +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE + case RGB_MATRIX_SOLID_REACTIVE: + rendering = rgb_matrix_solid_reactive(&rgb_effect_params); // Max 4ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE +#ifndef DISABLE_RGB_MATRIX_SPLASH + case RGB_MATRIX_SPLASH: + rendering = rgb_matrix_splash(&rgb_effect_params); // Max 5ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_SPLASH +#ifndef DISABLE_RGB_MATRIX_MULTISPLASH + case RGB_MATRIX_MULTISPLASH: + rendering = rgb_matrix_multisplash(&rgb_effect_params); // Max 10ms Avg 5ms + break; +#endif // DISABLE_RGB_MATRIX_MULTISPLASH +#ifndef DISABLE_RGB_MATRIX_SOLID_SPLASH + case RGB_MATRIX_SOLID_SPLASH: + rendering = rgb_matrix_solid_splash(&rgb_effect_params); // Max 5ms Avg 3ms + break; +#endif // DISABLE_RGB_MATRIX_SOLID_SPLASH +#ifndef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + case RGB_MATRIX_SOLID_MULTISPLASH: + rendering = rgb_matrix_solid_multisplash(&rgb_effect_params); // Max 10ms Avg 5ms + break; +#endif // DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED - // Change one LED every tick, make sure speed is not 0 - uint8_t led_to_change = ( g_tick & ( 0x0A / (rgb_matrix_config.speed == 0 ? 1 : rgb_matrix_config.speed) ) ) == 0 ? rand() % (DRIVER_LED_TOTAL) : 255; + // Factory default magic value + case UINT8_MAX: { + rgb_matrix_test(); + rgb_task_state = FLUSHING; + } + return; + } - for ( int i=0; i 0 && map[col][row] < max_intensity) { - // neither fully bright nor dark, decay it - map[col][row]--; - } - // set the pixel colour - uint8_t led, led_count; - map_row_column_to_led(row, col, &led, &led_count); - - if (map[col][row] > pure_green_intensity) { - const uint8_t boost = (uint8_t) ((uint16_t) max_brightness_boost - * (map[col][row] - pure_green_intensity) / (max_intensity - pure_green_intensity)); - rgb_matrix_set_color(led, boost, max_intensity, boost); - } - else { - const uint8_t green = (uint8_t) ((uint16_t) max_intensity * map[col][row] / pure_green_intensity); - rgb_matrix_set_color(led, 0, green, 0); - } - } - } - if (++drop > drop_ticks) { - // reset drop timer - drop = 0; - for (uint8_t row = MATRIX_ROWS - 1; row > 0; row--) { - for (uint8_t col = 0; col < MATRIX_COLS; col++) { - // if ths is on the bottom row and bright allow decay - if (row == MATRIX_ROWS - 1 && map[col][row] == max_intensity) { - map[col][row]--; - } - // check if the pixel above is bright - if (map[col][row - 1] == max_intensity) { - // allow old bright pixel to decay - map[col][row - 1]--; - // make this pixel bright - map[col][row] = max_intensity; - } - } - } - } -} + // update pwm buffers + rgb_matrix_update_pwm_buffers(); -void rgb_matrix_multisplash(void) { - // if (g_any_key_hit < 0xFF) { - HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; - RGB rgb; - rgb_led led; - for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - uint16_t c = 0, d = 0; - rgb_led last_led; - // if (g_last_led_count) { - for (uint8_t last_i = 0; last_i < g_last_led_count; last_i++) { - last_led = g_rgb_leds[g_last_led_hit[last_i]]; - uint16_t dist = (uint16_t)sqrt(pow(led.point.x - last_led.point.x, 2) + pow(led.point.y - last_led.point.y, 2)); - uint16_t effect = (g_key_hit[g_last_led_hit[last_i]] << 2) - dist; - c += MIN(MAX(effect, 0), 255); - d += 255 - MIN(MAX(effect, 0), 255); - } - // } else { - // d = 255; - // } - hsv.h = (rgb_matrix_config.hue + c) % 256; - hsv.v = MAX(MIN(d, 255), 0); - rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); - } - // } else { - // rgb_matrix_set_color_all( 0, 0, 0 ); - // } -} - - -void rgb_matrix_splash(void) { - g_last_led_count = MIN(g_last_led_count, 1); - rgb_matrix_multisplash(); -} - - -void rgb_matrix_solid_multisplash(void) { - // if (g_any_key_hit < 0xFF) { - HSV hsv = { .h = rgb_matrix_config.hue, .s = rgb_matrix_config.sat, .v = rgb_matrix_config.val }; - RGB rgb; - rgb_led led; - for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { - led = g_rgb_leds[i]; - uint16_t d = 0; - rgb_led last_led; - // if (g_last_led_count) { - for (uint8_t last_i = 0; last_i < g_last_led_count; last_i++) { - last_led = g_rgb_leds[g_last_led_hit[last_i]]; - uint16_t dist = (uint16_t)sqrt(pow(led.point.x - last_led.point.x, 2) + pow(led.point.y - last_led.point.y, 2)); - uint16_t effect = (g_key_hit[g_last_led_hit[last_i]] << 2) - dist; - d += 255 - MIN(MAX(effect, 0), 255); - } - // } else { - // d = 255; - // } - hsv.v = MAX(MIN(d, 255), 0); - rgb = hsv_to_rgb( hsv ); - rgb_matrix_set_color( i, rgb.r, rgb.g, rgb.b ); - } - // } else { - // rgb_matrix_set_color_all( 0, 0, 0 ); - // } -} - - -void rgb_matrix_solid_splash(void) { - g_last_led_count = MIN(g_last_led_count, 1); - rgb_matrix_solid_multisplash(); -} - - -// Needs eeprom access that we don't have setup currently - -void rgb_matrix_custom(void) { -// HSV hsv; -// RGB rgb; -// for ( int i=0; i 0 && g_any_key_hit > RGB_DISABLE_AFTER_TIMEOUT * 60 * 20)); - uint8_t effect = suspend_backlight ? 0 : rgb_matrix_config.mode; - - #ifdef TRACK_PREVIOUS_EFFECT - // Keep track of the effect used last time, - // detect change in effect, so each effect can - // have an optional initialization. - - static uint8_t effect_last = 255; - bool initialize = (effect != effect_last) || (rgb_matrix_config.enable != toggle_enable_last); - effect_last = effect; - toggle_enable_last = rgb_matrix_config.enable; - #endif - - // this gets ticked at 20 Hz. - // each effect can opt to do calculations - // and/or request PWM buffer updates. - switch ( effect ) { - case RGB_MATRIX_SOLID_COLOR: - rgb_matrix_solid_color(); - break; - #ifndef DISABLE_RGB_MATRIX_ALPHAS_MODS - case RGB_MATRIX_ALPHAS_MODS: - rgb_matrix_alphas_mods(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_DUAL_BEACON - case RGB_MATRIX_DUAL_BEACON: - rgb_matrix_dual_beacon(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN - case RGB_MATRIX_GRADIENT_UP_DOWN: - rgb_matrix_gradient_up_down(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_RAINDROPS - case RGB_MATRIX_RAINDROPS: - rgb_matrix_raindrops( initialize ); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_CYCLE_ALL - case RGB_MATRIX_CYCLE_ALL: - rgb_matrix_cycle_all(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT - case RGB_MATRIX_CYCLE_LEFT_RIGHT: - rgb_matrix_cycle_left_right(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_CYCLE_UP_DOWN - case RGB_MATRIX_CYCLE_UP_DOWN: - rgb_matrix_cycle_up_down(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_RAINBOW_BEACON - case RGB_MATRIX_RAINBOW_BEACON: - rgb_matrix_rainbow_beacon(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS - case RGB_MATRIX_RAINBOW_PINWHEELS: - rgb_matrix_rainbow_pinwheels(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON - case RGB_MATRIX_RAINBOW_MOVING_CHEVRON: - rgb_matrix_rainbow_moving_chevron(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - case RGB_MATRIX_JELLYBEAN_RAINDROPS: - rgb_matrix_jellybean_raindrops( initialize ); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_DIGITAL_RAIN - case RGB_MATRIX_DIGITAL_RAIN: - rgb_matrix_digital_rain( initialize ); - break; - #endif - #ifdef RGB_MATRIX_KEYPRESSES - #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE - case RGB_MATRIX_SOLID_REACTIVE: - rgb_matrix_solid_reactive(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE - case RGB_MATRIX_SOLID_REACTIVE_SIMPLE: - rgb_matrix_solid_reactive_simple(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_SPLASH - case RGB_MATRIX_SPLASH: - rgb_matrix_splash(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_MULTISPLASH - case RGB_MATRIX_MULTISPLASH: - rgb_matrix_multisplash(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_SPLASH - case RGB_MATRIX_SOLID_SPLASH: - rgb_matrix_solid_splash(); - break; - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH - case RGB_MATRIX_SOLID_MULTISPLASH: - rgb_matrix_solid_multisplash(); - break; - #endif - #endif - default: - rgb_matrix_custom(); - break; - } - - if ( ! suspend_backlight ) { - rgb_matrix_indicators(); - } + rgb_task_timers(); + + // Ideally we would also stop sending zeros to the LED driver PWM buffers + // while suspended and just do a software shutdown. This is a cheap hack for now. + bool suspend_backlight = ((g_suspend_state && RGB_DISABLE_WHEN_USB_SUSPENDED) || (RGB_DISABLE_AFTER_TIMEOUT > 0 && g_rgb_counters.any_key_hit > RGB_DISABLE_AFTER_TIMEOUT * 60 * 20)); + uint8_t effect = suspend_backlight || !rgb_matrix_config.enable ? 0 : rgb_matrix_config.mode; + + switch (rgb_task_state) { + case STARTING: + rgb_task_start(); + break; + case RENDERING: + rgb_task_render(effect); + break; + case FLUSHING: + rgb_task_flush(effect); + break; + case SYNCING: + rgb_task_sync(); + break; + } + if (!suspend_backlight) { + rgb_matrix_indicators(); + } } void rgb_matrix_indicators(void) { - rgb_matrix_indicators_kb(); - rgb_matrix_indicators_user(); + rgb_matrix_indicators_kb(); + rgb_matrix_indicators_user(); } __attribute__((weak)) @@ -817,103 +473,54 @@ void rgb_matrix_indicators_kb(void) {} __attribute__((weak)) void rgb_matrix_indicators_user(void) {} - -// void rgb_matrix_set_indicator_index( uint8_t *index, uint8_t row, uint8_t column ) -// { -// if ( row >= MATRIX_ROWS ) -// { -// // Special value, 255=none, 254=all -// *index = row; -// } -// else -// { -// // This needs updated to something like -// // uint8_t led[8], led_count; -// // map_row_column_to_led(row,column,led,&led_count); -// // for(uint8_t i = 0; i < led_count; i++) -// map_row_column_to_led( row, column, index ); -// } -// } - void rgb_matrix_init(void) { rgb_matrix_driver.init(); // TODO: put the 1 second startup delay here? - // clear the key hits - for ( int led=0; ledh = eeprom_read_byte(address); -// hsv->s = eeprom_read_byte(address+1); -// hsv->v = eeprom_read_byte(address+2); -// } - -// void backlight_set_key_color( uint8_t row, uint8_t column, HSV hsv ) -// { -// uint8_t led[8], led_count; -// map_row_column_to_led(row,column,led,&led_count); -// for(uint8_t i = 0; i < led_count; i++) { -// if ( led[i] < DRIVER_LED_TOTAL ) -// { -// void *address = backlight_get_custom_key_color_eeprom_address(led[i]); -// eeprom_update_byte(address, hsv.h); -// eeprom_update_byte(address+1, hsv.s); -// eeprom_update_byte(address+2, hsv.v); -// } -// } -// } - -uint32_t rgb_matrix_get_tick(void) { - return g_tick; +void rgb_matrix_set_suspend_state(bool state) { + g_suspend_state = state; } void rgb_matrix_toggle(void) { - rgb_matrix_config.enable ^= 1; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.enable++; + if (!rgb_matrix_config.enable) { + rgb_task_state = STARTING; + } + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_enable(void) { rgb_matrix_config.enable = 1; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_enable_noeeprom(void) { @@ -922,7 +529,7 @@ void rgb_matrix_enable_noeeprom(void) { void rgb_matrix_disable(void) { rgb_matrix_config.enable = 0; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_disable_noeeprom(void) { @@ -930,76 +537,79 @@ void rgb_matrix_disable_noeeprom(void) { } void rgb_matrix_step(void) { - rgb_matrix_config.mode++; - if (rgb_matrix_config.mode >= RGB_MATRIX_EFFECT_MAX) - rgb_matrix_config.mode = 1; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.mode++; + if (rgb_matrix_config.mode >= RGB_MATRIX_EFFECT_MAX) + rgb_matrix_config.mode = 1; + rgb_task_state = STARTING; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_step_reverse(void) { - rgb_matrix_config.mode--; - if (rgb_matrix_config.mode < 1) - rgb_matrix_config.mode = RGB_MATRIX_EFFECT_MAX - 1; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.mode--; + if (rgb_matrix_config.mode < 1) + rgb_matrix_config.mode = RGB_MATRIX_EFFECT_MAX - 1; + rgb_task_state = STARTING; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_increase_hue(void) { - rgb_matrix_config.hue = increment( rgb_matrix_config.hue, 8, 0, 255 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.hue += RGB_MATRIX_HUE_STEP; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_decrease_hue(void) { - rgb_matrix_config.hue = decrement( rgb_matrix_config.hue, 8, 0, 255 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.hue -= RGB_MATRIX_HUE_STEP; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_increase_sat(void) { - rgb_matrix_config.sat = increment( rgb_matrix_config.sat, 8, 0, 255 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.sat = qadd8(rgb_matrix_config.sat, RGB_MATRIX_SAT_STEP); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_decrease_sat(void) { - rgb_matrix_config.sat = decrement( rgb_matrix_config.sat, 8, 0, 255 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.sat = qsub8(rgb_matrix_config.sat, RGB_MATRIX_SAT_STEP); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_increase_val(void) { - rgb_matrix_config.val = increment( rgb_matrix_config.val, 8, 0, RGB_MATRIX_MAXIMUM_BRIGHTNESS ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.val = qadd8(rgb_matrix_config.val, RGB_MATRIX_VAL_STEP); + if (rgb_matrix_config.val > RGB_MATRIX_MAXIMUM_BRIGHTNESS) + rgb_matrix_config.val = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_decrease_val(void) { - rgb_matrix_config.val = decrement( rgb_matrix_config.val, 8, 0, RGB_MATRIX_MAXIMUM_BRIGHTNESS ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.val = qsub8(rgb_matrix_config.val, RGB_MATRIX_VAL_STEP); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_increase_speed(void) { - rgb_matrix_config.speed = increment( rgb_matrix_config.speed, 1, 0, 3 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw);//EECONFIG needs to be increased to support this + rgb_matrix_config.speed = qadd8(rgb_matrix_config.speed, RGB_MATRIX_SPD_STEP); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw);//EECONFIG needs to be increased to support this } void rgb_matrix_decrease_speed(void) { - rgb_matrix_config.speed = decrement( rgb_matrix_config.speed, 1, 0, 3 ); - eeconfig_update_rgb_matrix(rgb_matrix_config.raw);//EECONFIG needs to be increased to support this + rgb_matrix_config.speed = qsub8(rgb_matrix_config.speed, RGB_MATRIX_SPD_STEP); + eeconfig_update_rgb_matrix(rgb_matrix_config.raw);//EECONFIG needs to be increased to support this } void rgb_matrix_mode(uint8_t mode) { - rgb_matrix_config.mode = mode; - eeconfig_update_rgb_matrix(rgb_matrix_config.raw); + rgb_matrix_config.mode = mode; + rgb_task_state = STARTING; + eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } void rgb_matrix_mode_noeeprom(uint8_t mode) { - rgb_matrix_config.mode = mode; + rgb_matrix_config.mode = mode; } uint8_t rgb_matrix_get_mode(void) { - return rgb_matrix_config.mode; + return rgb_matrix_config.mode; } void rgb_matrix_sethsv(uint16_t hue, uint8_t sat, uint8_t val) { - rgb_matrix_config.hue = hue; - rgb_matrix_config.sat = sat; - rgb_matrix_config.val = val; + rgb_matrix_sethsv_noeeprom(hue, sat, val); eeconfig_update_rgb_matrix(rgb_matrix_config.raw); } @@ -1007,4 +617,6 @@ void rgb_matrix_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) { rgb_matrix_config.hue = hue; rgb_matrix_config.sat = sat; rgb_matrix_config.val = val; + if (rgb_matrix_config.val > RGB_MATRIX_MAXIMUM_BRIGHTNESS) + rgb_matrix_config.val = RGB_MATRIX_MAXIMUM_BRIGHTNESS; } diff --git a/quantum/rgb_matrix.h b/quantum/rgb_matrix.h index e6acd2d4b5..855ea03230 100644 --- a/quantum/rgb_matrix.h +++ b/quantum/rgb_matrix.h @@ -21,32 +21,33 @@ #include #include +#include "rgb_matrix_types.h" #include "color.h" #include "quantum.h" #ifdef IS31FL3731 - #include "is31fl3731.h" + #include "is31fl3731.h" #elif defined (IS31FL3733) - #include "is31fl3733.h" + #include "is31fl3733.h" #endif -typedef struct Point { - uint8_t x; - uint8_t y; -} __attribute__((packed)) Point; +#ifndef RGB_MATRIX_LED_FLUSH_LIMIT + #define RGB_MATRIX_LED_FLUSH_LIMIT 16 +#endif -typedef struct rgb_led { - union { - uint8_t raw; - struct { - uint8_t row:4; // 16 max - uint8_t col:4; // 16 max - }; - } matrix_co; - Point point; - uint8_t modifier:1; -} __attribute__((packed)) rgb_led; +#ifndef RGB_MATRIX_LED_PROCESS_LIMIT + #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 +#endif +#if defined(RGB_MATRIX_LED_PROCESS_LIMIT) && RGB_MATRIX_LED_PROCESS_LIMIT > 0 && RGB_MATRIX_LED_PROCESS_LIMIT < DRIVER_LED_TOTAL +#define RGB_MATRIX_USE_LIMITS(min, max) uint8_t min = RGB_MATRIX_LED_PROCESS_LIMIT * params->iter; \ + uint8_t max = min + RGB_MATRIX_LED_PROCESS_LIMIT; \ + if (max > DRIVER_LED_TOTAL) \ + max = DRIVER_LED_TOTAL; +#else +#define RGB_MATRIX_USE_LIMITS(min, max) uint8_t min = 0; \ + uint8_t max = DRIVER_LED_TOTAL; +#endif extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; @@ -56,79 +57,73 @@ typedef struct uint8_t index; } rgb_indicator; -typedef union { - uint32_t raw; - struct { - bool enable :1; - uint8_t mode :6; - uint16_t hue :9; - uint8_t sat :8; - uint8_t val :8; - uint8_t speed :8;//EECONFIG needs to be increased to support this - }; -} rgb_config_t; - enum rgb_matrix_effects { + RGB_MATRIX_NONE = 0, RGB_MATRIX_SOLID_COLOR = 1, #ifndef DISABLE_RGB_MATRIX_ALPHAS_MODS - RGB_MATRIX_ALPHAS_MODS, -#endif -#ifndef DISABLE_RGB_MATRIX_DUAL_BEACON - RGB_MATRIX_DUAL_BEACON, -#endif + RGB_MATRIX_ALPHAS_MODS, +#endif // DISABLE_RGB_MATRIX_ALPHAS_MODS #ifndef DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN - RGB_MATRIX_GRADIENT_UP_DOWN, -#endif -#ifndef DISABLE_RGB_MATRIX_RAINDROPS - RGB_MATRIX_RAINDROPS, -#endif + RGB_MATRIX_GRADIENT_UP_DOWN, +#endif // DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#ifndef DISABLE_RGB_MATRIX_BREATHING + RGB_MATRIX_BREATHING, +#endif // DISABLE_RGB_MATRIX_BREATHING #ifndef DISABLE_RGB_MATRIX_CYCLE_ALL - RGB_MATRIX_CYCLE_ALL, -#endif + RGB_MATRIX_CYCLE_ALL, +#endif // DISABLE_RGB_MATRIX_CYCLE_ALL #ifndef DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT - RGB_MATRIX_CYCLE_LEFT_RIGHT, -#endif + RGB_MATRIX_CYCLE_LEFT_RIGHT, +#endif // DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT #ifndef DISABLE_RGB_MATRIX_CYCLE_UP_DOWN - RGB_MATRIX_CYCLE_UP_DOWN, -#endif + RGB_MATRIX_CYCLE_UP_DOWN, +#endif // DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +#ifndef DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON + RGB_MATRIX_RAINBOW_MOVING_CHEVRON, +#endif // DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#ifndef DISABLE_RGB_MATRIX_DUAL_BEACON + RGB_MATRIX_DUAL_BEACON, +#endif // DISABLE_RGB_MATRIX_DUAL_BEACON #ifndef DISABLE_RGB_MATRIX_RAINBOW_BEACON - RGB_MATRIX_RAINBOW_BEACON, -#endif + RGB_MATRIX_RAINBOW_BEACON, +#endif // DISABLE_RGB_MATRIX_RAINBOW_BEACON #ifndef DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS - RGB_MATRIX_RAINBOW_PINWHEELS, -#endif -#ifndef DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON - RGB_MATRIX_RAINBOW_MOVING_CHEVRON, -#endif + RGB_MATRIX_RAINBOW_PINWHEELS, +#endif // DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#ifndef DISABLE_RGB_MATRIX_RAINDROPS + RGB_MATRIX_RAINDROPS, +#endif // DISABLE_RGB_MATRIX_RAINDROPS #ifndef DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - RGB_MATRIX_JELLYBEAN_RAINDROPS, -#endif + RGB_MATRIX_JELLYBEAN_RAINDROPS, +#endif // DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS #ifndef DISABLE_RGB_MATRIX_DIGITAL_RAIN - RGB_MATRIX_DIGITAL_RAIN, -#endif -#ifdef RGB_MATRIX_KEYPRESSES - #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE - RGB_MATRIX_SOLID_REACTIVE, - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE - RGB_MATRIX_SOLID_REACTIVE_SIMPLE, - #endif - #ifndef DISABLE_RGB_MATRIX_SPLASH - RGB_MATRIX_SPLASH, - #endif - #ifndef DISABLE_RGB_MATRIX_MULTISPLASH - RGB_MATRIX_MULTISPLASH, - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_SPLASH - RGB_MATRIX_SOLID_SPLASH, - #endif - #ifndef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH - RGB_MATRIX_SOLID_MULTISPLASH, - #endif -#endif - RGB_MATRIX_EFFECT_MAX + RGB_MATRIX_DIGITAL_RAIN, +#endif // DISABLE_RGB_MATRIX_DIGITAL_RAIN +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE + RGB_MATRIX_SOLID_REACTIVE_SIMPLE, +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE + RGB_MATRIX_SOLID_REACTIVE, +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE +#ifndef DISABLE_RGB_MATRIX_SPLASH + RGB_MATRIX_SPLASH, +#endif // DISABLE_RGB_MATRIX_SPLASH +#ifndef DISABLE_RGB_MATRIX_MULTISPLASH + RGB_MATRIX_MULTISPLASH, +#endif // DISABLE_RGB_MATRIX_MULTISPLASH +#ifndef DISABLE_RGB_MATRIX_SOLID_SPLASH + RGB_MATRIX_SOLID_SPLASH, +#endif // DISABLE_RGB_MATRIX_SOLID_SPLASH +#ifndef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + RGB_MATRIX_SOLID_MULTISPLASH, +#endif // DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED + RGB_MATRIX_EFFECT_MAX }; +uint8_t rgb_matrix_map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led_i); + void rgb_matrix_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ); void rgb_matrix_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); @@ -162,8 +157,6 @@ void rgb_matrix_decrease(void); // void backlight_get_key_color( uint8_t led, HSV *hsv ); // void backlight_set_key_color( uint8_t row, uint8_t column, HSV hsv ); -uint32_t rgb_matrix_get_tick(void); - void rgb_matrix_toggle(void); void rgb_matrix_enable(void); void rgb_matrix_enable_noeeprom(void); @@ -212,7 +205,6 @@ uint8_t rgb_matrix_get_mode(void); typedef struct { /* Perform any initialisation required for the other driver functions to work. */ void (*init)(void); - /* Set the colour of a single LED in the buffer. */ void (*set_color)(int index, uint8_t r, uint8_t g, uint8_t b); /* Set the colour of all LEDS on the keyboard in the buffer. */ diff --git a/quantum/rgb_matrix_animations/alpha_mods_anim.h b/quantum/rgb_matrix_animations/alpha_mods_anim.h new file mode 100644 index 0000000000..cc1914d7f4 --- /dev/null +++ b/quantum/rgb_matrix_animations/alpha_mods_anim.h @@ -0,0 +1,26 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_ALPHAS_MODS + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +// alphas = color1, mods = color2 +bool rgb_matrix_alphas_mods(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val }; + RGB rgb1 = hsv_to_rgb(hsv); + hsv.h += rgb_matrix_config.speed; + RGB rgb2 = hsv_to_rgb(hsv); + + for (uint8_t i = led_min; i < led_max; i++) { + if (g_rgb_leds[i].modifier) { + rgb_matrix_set_color(i, rgb2.r, rgb2.g, rgb2.b); + } else { + rgb_matrix_set_color(i, rgb1.r, rgb1.g, rgb1.b); + } + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_ALPHAS_MODS diff --git a/quantum/rgb_matrix_animations/breathing_anim.h b/quantum/rgb_matrix_animations/breathing_anim.h new file mode 100644 index 0000000000..fb90b66bdf --- /dev/null +++ b/quantum/rgb_matrix_animations/breathing_anim.h @@ -0,0 +1,19 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_BREATHING + +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_breathing(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + uint16_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 8); + uint8_t val = scale8(abs8(sin8(time) - 128) * 2, rgb_matrix_config.val); + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, val }; + RGB rgb = hsv_to_rgb(hsv); + for (uint8_t i = led_min; i < led_max; i++) { + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_BREATHING diff --git a/quantum/rgb_matrix_animations/cycle_all_anim.h b/quantum/rgb_matrix_animations/cycle_all_anim.h new file mode 100644 index 0000000000..5c18cfa0c9 --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_all_anim.h @@ -0,0 +1,21 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_CYCLE_ALL + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_cycle_all(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + hsv.h = time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_CYCLE_ALL diff --git a/quantum/rgb_matrix_animations/cycle_left_right_anim.h b/quantum/rgb_matrix_animations/cycle_left_right_anim.h new file mode 100644 index 0000000000..f519aeb476 --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_left_right_anim.h @@ -0,0 +1,22 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_cycle_left_right(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = point.x - time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT diff --git a/quantum/rgb_matrix_animations/cycle_up_down_anim.h b/quantum/rgb_matrix_animations/cycle_up_down_anim.h new file mode 100644 index 0000000000..8b91d890de --- /dev/null +++ b/quantum/rgb_matrix_animations/cycle_up_down_anim.h @@ -0,0 +1,22 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_CYCLE_UP_DOWN + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_cycle_up_down(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = point.y - time; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_CYCLE_UP_DOWN diff --git a/quantum/rgb_matrix_animations/digital_rain_anim.h b/quantum/rgb_matrix_animations/digital_rain_anim.h new file mode 100644 index 0000000000..4ba3c1c87d --- /dev/null +++ b/quantum/rgb_matrix_animations/digital_rain_anim.h @@ -0,0 +1,74 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_DIGITAL_RAIN + +#ifndef RGB_DIGITAL_RAIN_DROPS + // lower the number for denser effect/wider keyboard + #define RGB_DIGITAL_RAIN_DROPS 24 +#endif + +bool rgb_matrix_digital_rain(effect_params_t* params) { + // algorithm ported from https://github.com/tremby/Kaleidoscope-LEDEffect-DigitalRain + const uint8_t drop_ticks = 28; + const uint8_t pure_green_intensity = 0xd0; + const uint8_t max_brightness_boost = 0xc0; + const uint8_t max_intensity = 0xff; + + static uint8_t map[MATRIX_COLS][MATRIX_ROWS] = {{0}}; + static uint8_t drop = 0; + + if (params->init) { + rgb_matrix_set_color_all(0, 0, 0); + memset(map, 0, sizeof map); + drop = 0; + } + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + if (row == 0 && drop == 0 && rand() < RAND_MAX / RGB_DIGITAL_RAIN_DROPS) { + // top row, pixels have just fallen and we're + // making a new rain drop in this column + map[col][row] = max_intensity; + } + else if (map[col][row] > 0 && map[col][row] < max_intensity) { + // neither fully bright nor dark, decay it + map[col][row]--; + } + // set the pixel colour + uint8_t led[LED_HITS_TO_REMEMBER]; + uint8_t led_count = rgb_matrix_map_row_column_to_led(row, col, led); + + // TODO: multiple leds are supported mapped to the same row/column + if (led_count > 0) { + if (map[col][row] > pure_green_intensity) { + const uint8_t boost = (uint8_t) ((uint16_t) max_brightness_boost * (map[col][row] - pure_green_intensity) / (max_intensity - pure_green_intensity)); + rgb_matrix_set_color(led[0], boost, max_intensity, boost); + } + else { + const uint8_t green = (uint8_t) ((uint16_t) max_intensity * map[col][row] / pure_green_intensity); + rgb_matrix_set_color(led[0], 0, green, 0); + } + } + } + } + if (++drop > drop_ticks) { + // reset drop timer + drop = 0; + for (uint8_t row = MATRIX_ROWS - 1; row > 0; row--) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + // if ths is on the bottom row and bright allow decay + if (row == MATRIX_ROWS - 1 && map[col][row] == max_intensity) { + map[col][row]--; + } + // check if the pixel above is bright + if (map[col][row - 1] == max_intensity) { + // allow old bright pixel to decay + map[col][row - 1]--; + // make this pixel bright + map[col][row] = max_intensity; + } + } + } + } + return false; +} + +#endif // DISABLE_RGB_MATRIX_DIGITAL_RAIN diff --git a/quantum/rgb_matrix_animations/dual_beacon_anim.h b/quantum/rgb_matrix_animations/dual_beacon_anim.h new file mode 100644 index 0000000000..dda3157809 --- /dev/null +++ b/quantum/rgb_matrix_animations/dual_beacon_anim.h @@ -0,0 +1,24 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_DUAL_BEACON + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_dual_beacon(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint16_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + int8_t cos_value = cos8(time) - 128; + int8_t sin_value = sin8(time) - 128; + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = ((point.y - 32) * cos_value + (point.x - 112) * sin_value) / 128 + rgb_matrix_config.hue; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_DUAL_BEACON diff --git a/quantum/rgb_matrix_animations/gradient_up_down_anim.h b/quantum/rgb_matrix_animations/gradient_up_down_anim.h new file mode 100644 index 0000000000..11498e22f5 --- /dev/null +++ b/quantum/rgb_matrix_animations/gradient_up_down_anim.h @@ -0,0 +1,22 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_gradient_up_down(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t scale = scale8(64, rgb_matrix_config.speed); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + // The y range will be 0..64, map this to 0..4 + // Relies on hue being 8-bit and wrapping + hsv.h = rgb_matrix_config.hue + scale * (point.y >> 4); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} +#endif // DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN diff --git a/quantum/rgb_matrix_animations/jellybean_raindrops_anim.h b/quantum/rgb_matrix_animations/jellybean_raindrops_anim.h new file mode 100644 index 0000000000..01ff5c2306 --- /dev/null +++ b/quantum/rgb_matrix_animations/jellybean_raindrops_anim.h @@ -0,0 +1,30 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +static void jellybean_raindrops_set_color(int i) { + HSV hsv = { rand() & 0xFF , rand() & 0xFF, rgb_matrix_config.val }; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); +} + +bool rgb_matrix_jellybean_raindrops(effect_params_t* params) { + if (!params->init) { + // Change one LED every tick, make sure speed is not 0 + if (scale16by8(g_rgb_counters.tick, qadd8(rgb_matrix_config.speed, 16)) % 5 == 0) { + jellybean_raindrops_set_color(rand() % DRIVER_LED_TOTAL); + } + return false; + } + + RGB_MATRIX_USE_LIMITS(led_min, led_max); + for (int i = led_min; i < led_max; i++) { + jellybean_raindrops_set_color(i); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS diff --git a/quantum/rgb_matrix_animations/rainbow_beacon_anim.h b/quantum/rgb_matrix_animations/rainbow_beacon_anim.h new file mode 100644 index 0000000000..3c15e64ab6 --- /dev/null +++ b/quantum/rgb_matrix_animations/rainbow_beacon_anim.h @@ -0,0 +1,24 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_RAINBOW_BEACON + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_rainbow_beacon(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint16_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + int16_t cos_value = 2 * (cos8(time) - 128); + int16_t sin_value = 2 * (sin8(time) - 128); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = ((point.y - 32) * cos_value + (point.x - 112) * sin_value) / 128 + rgb_matrix_config.hue; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_RAINBOW_BEACON diff --git a/quantum/rgb_matrix_animations/rainbow_moving_chevron_anim.h b/quantum/rgb_matrix_animations/rainbow_moving_chevron_anim.h new file mode 100644 index 0000000000..0d11d52802 --- /dev/null +++ b/quantum/rgb_matrix_animations/rainbow_moving_chevron_anim.h @@ -0,0 +1,22 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_rainbow_moving_chevron(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint8_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = abs8(point.y - 32) + (point.x - time) + rgb_matrix_config.hue; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON diff --git a/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h b/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h new file mode 100644 index 0000000000..d7cd42cbe8 --- /dev/null +++ b/quantum/rgb_matrix_animations/rainbow_pinwheels_anim.h @@ -0,0 +1,24 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS + +extern rgb_counters_t g_rgb_counters; +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_rainbow_pinwheels(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, rgb_matrix_config.val }; + uint16_t time = scale16by8(g_rgb_counters.tick, rgb_matrix_config.speed / 4); + int16_t cos_value = 3 * (cos8(time) - 128); + int16_t sin_value = 3 * (sin8(time) - 128); + for (uint8_t i = led_min; i < led_max; i++) { + point_t point = g_rgb_leds[i].point; + hsv.h = ((point.y - 32) * cos_value + (56 - abs8(point.x - 112)) * sin_value) / 128 + rgb_matrix_config.hue; + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS diff --git a/quantum/rgb_matrix_animations/raindrops_anim.h b/quantum/rgb_matrix_animations/raindrops_anim.h new file mode 100644 index 0000000000..fc721375b0 --- /dev/null +++ b/quantum/rgb_matrix_animations/raindrops_anim.h @@ -0,0 +1,40 @@ +#pragma once +#ifndef DISABLE_RGB_MATRIX_RAINDROPS +#include "rgb_matrix_types.h" + +extern rgb_counters_t g_rgb_counters; +extern rgb_config_t rgb_matrix_config; + +static void raindrops_set_color(int i) { + HSV hsv = { 0 , rgb_matrix_config.sat, rgb_matrix_config.val }; + + // Take the shortest path between hues + int16_t deltaH = ((rgb_matrix_config.hue + 180) % 360 - rgb_matrix_config.hue) / 4; + if (deltaH > 127) { + deltaH -= 256; + } else if (deltaH < -127) { + deltaH += 256; + } + + hsv.h = rgb_matrix_config.hue + (deltaH * (rand() & 0x03)); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); +} + +bool rgb_matrix_raindrops(effect_params_t* params) { + if (!params->init) { + // Change one LED every tick, make sure speed is not 0 + if (scale16by8(g_rgb_counters.tick, qadd8(rgb_matrix_config.speed, 16)) % 10 == 0) { + raindrops_set_color(rand() % DRIVER_LED_TOTAL); + } + return false; + } + + RGB_MATRIX_USE_LIMITS(led_min, led_max); + for (int i = led_min; i < led_max; i++) { + raindrops_set_color(i); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_RAINDROPS diff --git a/quantum/rgb_matrix_animations/solid_color_anim.h b/quantum/rgb_matrix_animations/solid_color_anim.h new file mode 100644 index 0000000000..24a197beb3 --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_color_anim.h @@ -0,0 +1,14 @@ +#pragma once + +extern rgb_config_t rgb_matrix_config; + +bool rgb_matrix_solid_color(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val }; + RGB rgb = hsv_to_rgb(hsv); + for (uint8_t i = led_min; i < led_max; i++) { + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} diff --git a/quantum/rgb_matrix_animations/solid_reactive_anim.h b/quantum/rgb_matrix_animations/solid_reactive_anim.h new file mode 100644 index 0000000000..220e542331 --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_reactive_anim.h @@ -0,0 +1,33 @@ +#pragma once +#if defined(RGB_MATRIX_KEYREACTIVE_ENABLED) +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE + +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +bool rgb_matrix_solid_reactive(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, 255, rgb_matrix_config.val }; + // Max tick based on speed scale ensures results from scale16by8 with rgb_matrix_config.speed are no greater than 255 + uint16_t max_tick = 65535 / rgb_matrix_config.speed; + // Relies on hue being 8-bit and wrapping + for (uint8_t i = led_min; i < led_max; i++) { + uint16_t tick = max_tick; + for(uint8_t j = 0; j < g_last_hit_tracker.count; j++) { + if (g_last_hit_tracker.index[j] == i && g_last_hit_tracker.tick[j] < tick) { + tick = g_last_hit_tracker.tick[j]; + break; + } + } + + uint16_t offset = scale16by8(tick, rgb_matrix_config.speed); + hsv.h = rgb_matrix_config.hue + qsub8(130, offset); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#endif // defined(RGB_MATRIX_KEYREACTIVE_ENABLED) diff --git a/quantum/rgb_matrix_animations/solid_reactive_simple_anim.h b/quantum/rgb_matrix_animations/solid_reactive_simple_anim.h new file mode 100644 index 0000000000..e84cd69392 --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_reactive_simple_anim.h @@ -0,0 +1,32 @@ +#pragma once +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE + +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +bool rgb_matrix_solid_reactive_simple(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + // Max tick based on speed scale ensures results from scale16by8 with rgb_matrix_config.speed are no greater than 255 + uint16_t max_tick = 65535 / rgb_matrix_config.speed; + for (uint8_t i = led_min; i < led_max; i++) { + uint16_t tick = max_tick; + for(uint8_t j = 0; j < g_last_hit_tracker.count; j++) { + if (g_last_hit_tracker.index[j] == i && g_last_hit_tracker.tick[j] < tick) { + tick = g_last_hit_tracker.tick[j]; + break; + } + } + + uint16_t offset = scale16by8(tick, rgb_matrix_config.speed); + hsv.v = scale8(255 - offset, rgb_matrix_config.val); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix_animations/solid_splash_anim.h b/quantum/rgb_matrix_animations/solid_splash_anim.h new file mode 100644 index 0000000000..82ac055b88 --- /dev/null +++ b/quantum/rgb_matrix_animations/solid_splash_anim.h @@ -0,0 +1,42 @@ +#pragma once +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#if !defined(DISABLE_RGB_MATRIX_SOLID_SPLASH) || !defined(DISABLE_RGB_MATRIX_SOLID_MULTISPLASH) + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +static bool rgb_matrix_solid_multisplash_range(uint8_t start, effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { rgb_matrix_config.hue, rgb_matrix_config.sat, 0 }; + uint8_t count = g_last_hit_tracker.count; + for (uint8_t i = led_min; i < led_max; i++) { + hsv.v = 0; + point_t point = g_rgb_leds[i].point; + for (uint8_t j = start; j < count; j++) { + int16_t dx = point.x - g_last_hit_tracker.x[j]; + int16_t dy = point.y - g_last_hit_tracker.y[j]; + uint8_t dist = sqrt16(dx * dx + dy * dy); + uint16_t effect = scale16by8(g_last_hit_tracker.tick[j], rgb_matrix_config.speed) - dist; + if (effect > 255) + effect = 255; + hsv.v = qadd8(hsv.v, 255 - effect); + } + hsv.v = scale8(hsv.v, rgb_matrix_config.val); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +bool rgb_matrix_solid_multisplash(effect_params_t* params) { + return rgb_matrix_solid_multisplash_range(0, params); +} + +bool rgb_matrix_solid_splash(effect_params_t* params) { + return rgb_matrix_solid_multisplash_range(qsub8(g_last_hit_tracker.count, 1), params); +} + +#endif // !defined(DISABLE_RGB_MATRIX_SPLASH) && !defined(DISABLE_RGB_MATRIX_MULTISPLASH) +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix_animations/splash_anim.h b/quantum/rgb_matrix_animations/splash_anim.h new file mode 100644 index 0000000000..829d30eef5 --- /dev/null +++ b/quantum/rgb_matrix_animations/splash_anim.h @@ -0,0 +1,44 @@ +#pragma once +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +#if !defined(DISABLE_RGB_MATRIX_SPLASH) || !defined(DISABLE_RGB_MATRIX_MULTISPLASH) + +extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL]; +extern rgb_config_t rgb_matrix_config; +extern last_hit_t g_last_hit_tracker; + +static bool rgb_matrix_multisplash_range(uint8_t start, effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + HSV hsv = { 0, rgb_matrix_config.sat, 0 }; + uint8_t count = g_last_hit_tracker.count; + for (uint8_t i = led_min; i < led_max; i++) { + hsv.h = rgb_matrix_config.hue; + hsv.v = 0; + point_t point = g_rgb_leds[i].point; + for (uint8_t j = start; j < count; j++) { + int16_t dx = point.x - g_last_hit_tracker.x[j]; + int16_t dy = point.y - g_last_hit_tracker.y[j]; + uint8_t dist = sqrt16(dx * dx + dy * dy); + uint16_t effect = scale16by8(g_last_hit_tracker.tick[j], rgb_matrix_config.speed) - dist; + if (effect > 255) + effect = 255; + hsv.h += effect; + hsv.v = qadd8(hsv.v, 255 - effect); + } + hsv.v = scale8(hsv.v, rgb_matrix_config.val); + RGB rgb = hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + return led_max < DRIVER_LED_TOTAL; +} + +bool rgb_matrix_multisplash(effect_params_t* params) { + return rgb_matrix_multisplash_range(0, params); +} + +bool rgb_matrix_splash(effect_params_t* params) { + return rgb_matrix_multisplash_range(qsub8(g_last_hit_tracker.count, 1), params); +} + +#endif // !defined(DISABLE_RGB_MATRIX_SPLASH) || !defined(DISABLE_RGB_MATRIX_MULTISPLASH) +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix_types.h b/quantum/rgb_matrix_types.h new file mode 100644 index 0000000000..908e96da56 --- /dev/null +++ b/quantum/rgb_matrix_types.h @@ -0,0 +1,97 @@ +#pragma once + +#include +#include + +#if defined(__GNUC__) +#define PACKED __attribute__ ((__packed__)) +#else +#define PACKED +#endif + +#if defined(_MSC_VER) +#pragma pack( push, 1 ) +#endif + +#if defined(RGB_MATRIX_KEYPRESSES) || defined(RGB_MATRIX_KEYRELEASES) + #define RGB_MATRIX_KEYREACTIVE_ENABLED +#endif + +// Last led hit +#ifndef LED_HITS_TO_REMEMBER + #define LED_HITS_TO_REMEMBER 8 +#endif // LED_HITS_TO_REMEMBER + +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +typedef struct PACKED { + uint8_t count; + uint8_t x[LED_HITS_TO_REMEMBER]; + uint8_t y[LED_HITS_TO_REMEMBER]; + uint8_t index[LED_HITS_TO_REMEMBER]; + uint16_t tick[LED_HITS_TO_REMEMBER]; +} last_hit_t; +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED + +typedef enum rgb_task_states { + STARTING, + RENDERING, + FLUSHING, + SYNCING +} rgb_task_states; + +typedef uint8_t led_flags_t; + +typedef struct PACKED { + uint8_t iter; + led_flags_t flags; + bool init; +} effect_params_t; + +typedef struct PACKED { + // Global tick at 20 Hz + uint32_t tick; + // Ticks since this key was last hit. + uint32_t any_key_hit; +} rgb_counters_t; + +typedef struct PACKED { + uint8_t x; + uint8_t y; +} point_t; + +typedef union { + uint8_t raw; + struct { + uint8_t row:4; // 16 max + uint8_t col:4; // 16 max + }; +} matrix_co_t; + +typedef struct PACKED { + matrix_co_t matrix_co; + point_t point; + uint8_t modifier:1; +} rgb_led; + +typedef enum { + RGB_ZONE_OFF = 0, + RGB_ZONE_ALL, + RGB_ZONE_KEYS, + RGB_ZONE_UNDER, +} rgb_zone_t; + +typedef union { + uint32_t raw; + struct PACKED { + uint8_t enable :2; + uint8_t mode :6; + uint8_t hue :8; + uint8_t sat :8; + uint8_t val :8; + uint8_t speed :8;//EECONFIG needs to be increased to support this + }; +} rgb_config_t; + +#if defined(_MSC_VER) +#pragma pack( pop ) +#endif diff --git a/quantum/split_common/matrix.c b/quantum/split_common/matrix.c index dcb96254f5..eb110bd23a 100644 --- a/quantum/split_common/matrix.c +++ b/quantum/split_common/matrix.c @@ -29,6 +29,10 @@ along with this program. If not, see . #include "debounce.h" #include "transport.h" +#ifdef ENCODER_ENABLE + #include "encoder.h" +#endif + #if (MATRIX_COLS <= 8) # define print_matrix_header() print("\nr/c 01234567\n") # define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) @@ -320,6 +324,9 @@ uint8_t matrix_scan(void) { matrix_scan_quantum(); } else { transport_slave(matrix + thisHand); +#ifdef ENCODER_ENABLE + encoder_read(); +#endif matrix_slave_scan_user(); } diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c index 4d52039aa0..bd5491d256 100644 --- a/quantum/split_common/transport.c +++ b/quantum/split_common/transport.c @@ -16,17 +16,24 @@ extern backlight_config_t backlight_config; #endif +#ifdef ENCODER_ENABLE +# include "encoder.h" +#endif + #if defined(USE_I2C) || defined(EH) # include "i2c_master.h" # include "i2c_slave.h" typedef struct _I2C_slave_buffer_t { + matrix_row_t smatrix[ROWS_PER_HAND]; uint8_t backlit_level; #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) rgblight_syncinfo_t rgblight_sync; #endif - matrix_row_t smatrix[ROWS_PER_HAND]; +#ifdef ENCODER_ENABLE + uint8_t encoder_state[NUMBER_OF_ENCODERS]; +#endif } I2C_slave_buffer_t; static I2C_slave_buffer_t * const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_reg; @@ -34,6 +41,7 @@ static I2C_slave_buffer_t * const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_r # define I2C_BACKLIT_START offsetof(I2C_slave_buffer_t, backlit_level) # define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync) # define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix) +# define I2C_ENCODER_START offsetof(I2C_slave_buffer_t, encoder_state) # define TIMEOUT 100 @@ -47,11 +55,10 @@ bool transport_master(matrix_row_t matrix[]) { // write backlight info # ifdef BACKLIGHT_ENABLE - static uint8_t prev_level = ~0; - uint8_t level = get_backlight_level(); - if (level != prev_level) { + uint8_t level = get_backlight_level(); + if (level != i2c_buffer->backlight_level) { if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) { - prev_level = level; + i2c_buffer->backlight_level = level; } } # endif @@ -67,6 +74,11 @@ bool transport_master(matrix_row_t matrix[]) { } # endif +# ifdef ENCODER_ENABLE + i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)i2c_buffer->encoder_state, sizeof(I2C_slave_buffer_t.encoder_state), TIMEOUT); + encoder_update_raw(i2c_buffer->encoder_state); +# endif + return true; } @@ -86,6 +98,10 @@ void transport_slave(matrix_row_t matrix[]) { i2c_buffer->rgblight_sync.status.change_flags = 0; } # endif + +# ifdef ENCODER_ENABLE + encoder_state_raw(i2c_buffer->encoder_state); +# endif } void transport_master_init(void) { i2c_init(); } @@ -99,6 +115,11 @@ void transport_slave_init(void) { i2c_slave_init(SLAVE_I2C_ADDRESS); } typedef struct _Serial_s2m_buffer_t { // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack matrix_row_t smatrix[ROWS_PER_HAND]; + +# ifdef ENCODER_ENABLE + uint8_t encoder_state[NUMBER_OF_ENCODERS]; +# endif + } Serial_s2m_buffer_t; typedef struct _Serial_m2s_buffer_t { @@ -205,6 +226,10 @@ bool transport_master(matrix_row_t matrix[]) { serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0; # endif +# ifdef ENCODER_ENABLE + encoder_update_raw(serial_s2m_buffer.encoder_state); +# endif + return true; } @@ -217,6 +242,11 @@ void transport_slave(matrix_row_t matrix[]) { # ifdef BACKLIGHT_ENABLE backlight_set(serial_m2s_buffer.backlight_level); # endif + +# ifdef ENCODER_ENABLE + encoder_state_raw(serial_s2m_buffer.encoder_state); +# endif + } #endif diff --git a/quantum/visualizer/readme.md b/quantum/visualizer/readme.md index 545ba22707..298efb742f 100644 --- a/quantum/visualizer/readme.md +++ b/quantum/visualizer/readme.md @@ -1,7 +1,7 @@ # A visualization library for the TMK keyboard firmware This library is designed to work together with the [TMK keyboard firmware](https://github.com/tmk/tmk_keyboard). Currently it only works for [Chibios](http://www.chibios.org/) - flavors, but it would be possible to add support for other configurations as well. The LCD display functionality is provided by the [uGFX library](http://www.ugfx.org/). + flavors, but it would be possible to add support for other configurations as well. The LCD display functionality is provided by the [uGFX library](https://ugfx.io/). ## To use this library as a user You can and should modify the visualizer\_user.c file. Check the comments in the file for more information. diff --git a/tmk_core/common/arm_atsam/suspend.c b/tmk_core/common/arm_atsam/suspend.c index e34965df64..9c2c47d561 100644 --- a/tmk_core/common/arm_atsam/suspend.c +++ b/tmk_core/common/arm_atsam/suspend.c @@ -35,7 +35,9 @@ void suspend_power_down_kb(void) { */ void suspend_power_down(void) { +#ifdef RGB_MATRIX_ENABLE I2C3733_Control_Set(0); //Disable LED driver +#endif suspend_power_down_kb(); } @@ -75,10 +77,9 @@ void suspend_wakeup_init_kb(void) { * FIXME: needs doc */ void suspend_wakeup_init(void) { - /* If LEDs are set to enabled, enable the hardware */ - if (led_enabled) { - I2C3733_Control_Set(1); - } +#ifdef RGB_MATRIX_ENABLE + I2C3733_Control_Set(1); +#endif suspend_wakeup_init_kb(); } diff --git a/tmk_core/protocol/arm_atsam.mk b/tmk_core/protocol/arm_atsam.mk index 04e02790a0..8d6f724f09 100644 --- a/tmk_core/protocol/arm_atsam.mk +++ b/tmk_core/protocol/arm_atsam.mk @@ -4,7 +4,10 @@ SRC += $(ARM_ATSAM_DIR)/adc.c SRC += $(ARM_ATSAM_DIR)/clks.c SRC += $(ARM_ATSAM_DIR)/d51_util.c SRC += $(ARM_ATSAM_DIR)/i2c_master.c -SRC += $(ARM_ATSAM_DIR)/led_matrix.c +ifeq ($(RGB_MATRIX_ENABLE),custom) + SRC += $(ARM_ATSAM_DIR)/led_matrix_programs.c + SRC += $(ARM_ATSAM_DIR)/led_matrix.c +endif SRC += $(ARM_ATSAM_DIR)/main_arm_atsam.c SRC += $(ARM_ATSAM_DIR)/spi.c SRC += $(ARM_ATSAM_DIR)/startup.c diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h index 928af8c7e1..88109186aa 100644 --- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h +++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h @@ -34,7 +34,10 @@ along with this program. If not, see . #ifndef MD_BOOTLOADER #include "main_arm_atsam.h" +#ifdef RGB_MATRIX_ENABLE #include "led_matrix.h" +#include "rgb_matrix.h" +#endif #include "issi3733_driver.h" #include "./usb/compiler.h" #include "./usb/udc.h" diff --git a/tmk_core/protocol/arm_atsam/i2c_master.c b/tmk_core/protocol/arm_atsam/i2c_master.c index d91a851f37..1741d9ac5b 100644 --- a/tmk_core/protocol/arm_atsam/i2c_master.c +++ b/tmk_core/protocol/arm_atsam/i2c_master.c @@ -17,7 +17,7 @@ along with this program. If not, see . #include "arm_atsam_protocol.h" -#ifndef MD_BOOTLOADER +#if !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE) #include @@ -37,7 +37,7 @@ static uint8_t dma_sendbuf[I2C_DMA_MAX_SEND]; //Data being written to I2C volatile uint8_t i2c_led_q_running; -#endif //MD_BOOTLOADER +#endif // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE) void i2c0_init(void) { @@ -112,7 +112,7 @@ void i2c0_stop(void) } } -#ifndef MD_BOOTLOADER +#if !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE) void i2c1_init(void) { DBGC(DC_I2C1_INIT_BEGIN); @@ -583,4 +583,4 @@ uint8_t i2c_led_q_run(void) return 1; } -#endif //MD_BOOTLOADER +#endif // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE) diff --git a/tmk_core/protocol/arm_atsam/led_matrix.c b/tmk_core/protocol/arm_atsam/led_matrix.c index 04d05af6db..e29fb6587c 100644 --- a/tmk_core/protocol/arm_atsam/led_matrix.c +++ b/tmk_core/protocol/arm_atsam/led_matrix.c @@ -17,9 +17,19 @@ along with this program. If not, see . #include "arm_atsam_protocol.h" #include "tmk_core/common/led.h" +#include "rgb_matrix.h" #include #include +#ifdef USE_MASSDROP_CONFIGURATOR +__attribute__((weak)) +led_instruction_t led_instructions[] = { { .end = 1 } }; +static void led_matrix_massdrop_config_override(int i); +#endif // USE_MASSDROP_CONFIGURATOR + +extern rgb_config_t rgb_matrix_config; +extern rgb_counters_t g_rgb_counters; + void SERCOM1_0_Handler( void ) { if (SERCOM1->I2CM.INTFLAG.bit.ERROR) @@ -51,14 +61,17 @@ void DMAC_0_Handler( void ) issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; -issi3733_led_t led_map[ISSI3733_LED_COUNT+1] = ISSI3733_LED_MAP; -issi3733_led_t *lede = led_map + ISSI3733_LED_COUNT; //End pointer of mapping +issi3733_led_t led_map[ISSI3733_LED_COUNT] = ISSI3733_LED_MAP; +RGB led_buffer[ISSI3733_LED_COUNT]; uint8_t gcr_desired; -uint8_t gcr_breathe; -uint8_t gcr_use; uint8_t gcr_actual; uint8_t gcr_actual_last; +#ifdef USE_MASSDROP_CONFIGURATOR +uint8_t gcr_breathe; +float breathe_mult; +float pomod; +#endif #define ACT_GCR_NONE 0 #define ACT_GCR_INC 1 @@ -73,11 +86,14 @@ static uint8_t v_5v_cat_hit; void gcr_compute(void) { uint8_t action = ACT_GCR_NONE; + uint8_t gcr_use = gcr_desired; +#ifdef USE_MASSDROP_CONFIGURATOR if (led_animation_breathing) + { gcr_use = gcr_breathe; - else - gcr_use = gcr_desired; + } +#endif //If the 5v takes a catastrophic hit, disable the LED drivers briefly, assert auto gcr mode, min gcr and let the auto take over if (v_5v < V5_CAT) @@ -151,6 +167,7 @@ void gcr_compute(void) gcr_actual -= LED_GCR_STEP_AUTO; gcr_min_counter = 0; +#ifdef USE_MASSDROP_CONFIGURATOR //If breathe mode is active, the top end can fluctuate if the host can not supply enough current //So set the breathe GCR to where it becomes stable if (led_animation_breathing == 1) @@ -160,12 +177,11 @@ void gcr_compute(void) // and the same would happen maybe one or two more times. Therefore I'm favoring // powering through one full breathe and letting gcr settle completely } +#endif } } } -led_disp_t disp; - void issi3733_prepare_arrays(void) { memset(issidrv,0,sizeof(issi3733_driver_t) * ISSI3733_DRIVER_COUNT); @@ -178,361 +194,309 @@ void issi3733_prepare_arrays(void) issidrv[i].addr = addrs[i]; } - issi3733_led_t *cur = led_map; - - while (cur < lede) + for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) { //BYTE: 1 + (SW-1)*16 + (CS-1) - cur->rgb.g = issidrv[cur->adr.drv-1].pwm + 1 + ((cur->adr.swg-1)*16 + (cur->adr.cs-1)); - cur->rgb.r = issidrv[cur->adr.drv-1].pwm + 1 + ((cur->adr.swr-1)*16 + (cur->adr.cs-1)); - cur->rgb.b = issidrv[cur->adr.drv-1].pwm + 1 + ((cur->adr.swb-1)*16 + (cur->adr.cs-1)); + led_map[i].rgb.g = issidrv[led_map[i].adr.drv-1].pwm + 1 + ((led_map[i].adr.swg-1)*16 + (led_map[i].adr.cs-1)); + led_map[i].rgb.r = issidrv[led_map[i].adr.drv-1].pwm + 1 + ((led_map[i].adr.swr-1)*16 + (led_map[i].adr.cs-1)); + led_map[i].rgb.b = issidrv[led_map[i].adr.drv-1].pwm + 1 + ((led_map[i].adr.swb-1)*16 + (led_map[i].adr.cs-1)); //BYTE: 1 + (SW-1)*2 + (CS-1)/8 //BIT: (CS-1)%8 - *(issidrv[cur->adr.drv-1].onoff + 1 + (cur->adr.swg-1)*2+(cur->adr.cs-1)/8) |= (1<<((cur->adr.cs-1)%8)); - *(issidrv[cur->adr.drv-1].onoff + 1 + (cur->adr.swr-1)*2+(cur->adr.cs-1)/8) |= (1<<((cur->adr.cs-1)%8)); - *(issidrv[cur->adr.drv-1].onoff + 1 + (cur->adr.swb-1)*2+(cur->adr.cs-1)/8) |= (1<<((cur->adr.cs-1)%8)); - - cur++; + *(issidrv[led_map[i].adr.drv-1].onoff + 1 + (led_map[i].adr.swg-1)*2+(led_map[i].adr.cs-1)/8) |= (1<<((led_map[i].adr.cs-1)%8)); + *(issidrv[led_map[i].adr.drv-1].onoff + 1 + (led_map[i].adr.swr-1)*2+(led_map[i].adr.cs-1)/8) |= (1<<((led_map[i].adr.cs-1)%8)); + *(issidrv[led_map[i].adr.drv-1].onoff + 1 + (led_map[i].adr.swb-1)*2+(led_map[i].adr.cs-1)/8) |= (1<<((led_map[i].adr.cs-1)%8)); } } -void disp_calc_extents(void) +void led_matrix_prepare(void) { - issi3733_led_t *cur = led_map; - - disp.left = 1e10; - disp.right = -1e10; - disp.top = -1e10; - disp.bottom = 1e10; - - while (cur < lede) + for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) { - if (cur->x < disp.left) disp.left = cur->x; - if (cur->x > disp.right) disp.right = cur->x; - if (cur->y < disp.bottom) disp.bottom = cur->y; - if (cur->y > disp.top) disp.top = cur->y; - - cur++; + *led_map[i].rgb.r = 0; + *led_map[i].rgb.g = 0; + *led_map[i].rgb.b = 0; } - - disp.width = disp.right - disp.left; - disp.height = disp.top - disp.bottom; - disp.max_distance = sqrtf(powf(disp.width, 2) + powf(disp.height, 2)); } -void disp_pixel_setup(void) +void led_set_one(int i, uint8_t r, uint8_t g, uint8_t b) { - issi3733_led_t *cur = led_map; - - while (cur < lede) + if (i < ISSI3733_LED_COUNT) { - cur->px = (cur->x - disp.left) / disp.width * 100; - cur->py = (cur->y - disp.bottom) / disp.height * 100; - *cur->rgb.r = 0; - *cur->rgb.g = 0; - *cur->rgb.b = 0; - - cur++; +#ifdef USE_MASSDROP_CONFIGURATOR + led_matrix_massdrop_config_override(i); +#else + led_buffer[i].r = r; + led_buffer[i].g = g; + led_buffer[i].b = b; +#endif } } -void led_matrix_prepare(void) +void led_set_all(uint8_t r, uint8_t g, uint8_t b) { - disp_calc_extents(); - disp_pixel_setup(); + for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) + { + led_set_one(i, r, g, b); + } } -uint8_t led_enabled; -float led_animation_speed; -uint8_t led_animation_direction; -uint8_t led_animation_orientation; -uint8_t led_animation_breathing; -uint8_t led_animation_breathe_cur; -uint8_t breathe_step; -uint8_t breathe_dir; -uint8_t led_animation_circular; -uint64_t led_next_run; - -uint8_t led_animation_id; -uint8_t led_lighting_mode; - -issi3733_led_t *led_cur; -uint8_t led_per_run = 15; -float breathe_mult; - -__attribute__ ((weak)) -void led_matrix_run(void) +void init(void) { - float ro; - float go; - float bo; - float po; - - uint8_t led_this_run = 0; - led_setup_t *f = (led_setup_t*)led_setups[led_animation_id]; - - if (led_cur == 0) //Denotes start of new processing cycle in the case of chunked processing - { - led_cur = led_map; + DBGC(DC_LED_MATRIX_INIT_BEGIN); - disp.frame += 1; + issi3733_prepare_arrays(); - breathe_mult = 1; + led_matrix_prepare(); - if (led_animation_breathing) - { - led_animation_breathe_cur += breathe_step * breathe_dir; + gcr_min_counter = 0; + v_5v_cat_hit = 0; - if (led_animation_breathe_cur >= BREATHE_MAX_STEP) - breathe_dir = -1; - else if (led_animation_breathe_cur <= BREATHE_MIN_STEP) - breathe_dir = 1; + DBGC(DC_LED_MATRIX_INIT_COMPLETE); +} - //Brightness curve created for 256 steps, 0 - ~98% - breathe_mult = 0.000015 * led_animation_breathe_cur * led_animation_breathe_cur; - if (breathe_mult > 1) breathe_mult = 1; - else if (breathe_mult < 0) breathe_mult = 0; - } - } +void flush(void) +{ +#ifdef USE_MASSDROP_CONFIGURATOR + if (!led_enabled) { return; } //Prevent calculations and I2C traffic if LED drivers are not enabled +#else + if (!sr_exp_data.bit.SDB_N) { return; } //Prevent calculations and I2C traffic if LED drivers are not enabled +#endif - uint8_t fcur = 0; - uint8_t fmax = 0; + // Wait for previous transfer to complete + while (i2c_led_q_running) {} - //Frames setup - while (f[fcur].end != 1) + // Copy buffer to live DMA region + for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) { - fcur++; //Count frames + *led_map[i].rgb.r = led_buffer[i].r; + *led_map[i].rgb.g = led_buffer[i].g; + *led_map[i].rgb.b = led_buffer[i].b; } - fmax = fcur; //Store total frames count +#ifdef USE_MASSDROP_CONFIGURATOR + breathe_mult = 1; - while (led_cur < lede && led_this_run < led_per_run) + if (led_animation_breathing) { - ro = 0; - go = 0; - bo = 0; - - if (led_lighting_mode == LED_MODE_KEYS_ONLY && led_cur->scan == 255) - { - //Do not act on this LED - } - else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && led_cur->scan != 255) - { - //Do not act on this LED - } - else if (led_lighting_mode == LED_MODE_INDICATORS_ONLY) - { - //Do not act on this LED (Only show indicators) - } - else - { - //Act on LED - for (fcur = 0; fcur < fmax; fcur++) - { - - if (led_animation_circular) { - po = sqrtf((powf(fabsf((disp.width / 2) - (led_cur->x - disp.left)), 2) + powf(fabsf((disp.height / 2) - (led_cur->y - disp.bottom)), 2))) / disp.max_distance * 100; - } - else { - if (led_animation_orientation) - { - po = led_cur->py; - } - else - { - po = led_cur->px; - } - } - - float pomod; - pomod = (float)(disp.frame % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; - - //Add in any moving effects - if ((!led_animation_direction && f[fcur].ef & EF_SCR_R) || (led_animation_direction && (f[fcur].ef & EF_SCR_L))) - { - pomod *= 100.0f; - pomod = (uint32_t)pomod % 10000; - pomod /= 100.0f; - - po -= pomod; - - if (po > 100) po -= 100; - else if (po < 0) po += 100; - } - else if ((!led_animation_direction && f[fcur].ef & EF_SCR_L) || (led_animation_direction && (f[fcur].ef & EF_SCR_R))) - { - pomod *= 100.0f; - pomod = (uint32_t)pomod % 10000; - pomod /= 100.0f; - po += pomod; - - if (po > 100) po -= 100; - else if (po < 0) po += 100; - } + //+60us 119 LED + led_animation_breathe_cur += BREATHE_STEP * breathe_dir; + + if (led_animation_breathe_cur >= BREATHE_MAX_STEP) + breathe_dir = -1; + else if (led_animation_breathe_cur <= BREATHE_MIN_STEP) + breathe_dir = 1; + + //Brightness curve created for 256 steps, 0 - ~98% + breathe_mult = 0.000015 * led_animation_breathe_cur * led_animation_breathe_cur; + if (breathe_mult > 1) breathe_mult = 1; + else if (breathe_mult < 0) breathe_mult = 0; + } - //Check if LED's po is in current frame - if (po < f[fcur].hs) continue; - if (po > f[fcur].he) continue; - //note: < 0 or > 100 continue + //This should only be performed once per frame + pomod = (float)((g_rgb_counters.tick / 10) % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed; + pomod *= 100.0f; + pomod = (uint32_t)pomod % 10000; + pomod /= 100.0f; - //Calculate the po within the start-stop percentage for color blending - po = (po - f[fcur].hs) / (f[fcur].he - f[fcur].hs); +#endif // USE_MASSDROP_CONFIGURATOR - //Add in any color effects - if (f[fcur].ef & EF_OVER) - { - ro = (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5; - go = (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5; - bo = (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5; - } - else if (f[fcur].ef & EF_SUBTRACT) - { - ro -= (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5; - go -= (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5; - bo -= (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5; - } - else - { - ro += (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5; - go += (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5; - bo += (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5; - } - } - } + uint8_t drvid; - //Clamp values 0-255 - if (ro > 255) ro = 255; else if (ro < 0) ro = 0; - if (go > 255) go = 255; else if (go < 0) go = 0; - if (bo > 255) bo = 255; else if (bo < 0) bo = 0; + //NOTE: GCR does not need to be timed with LED processing, but there is really no harm + if (gcr_actual != gcr_actual_last) + { + for (drvid=0;drvidrgb.r = (uint8_t)ro; - *led_cur->rgb.g = (uint8_t)go; - *led_cur->rgb.b = (uint8_t)bo; + i2c_led_q_run(); +} -#ifdef USB_LED_INDICATOR_ENABLE - if (keyboard_leds()) +void led_matrix_indicators(void) +{ + uint8_t kbled = keyboard_leds(); + if (kbled && rgb_matrix_config.enable) + { + for (uint8_t i = 0; i < ISSI3733_LED_COUNT; i++) { - uint8_t kbled = keyboard_leds(); if ( - #if USB_LED_NUM_LOCK_SCANCODE != 255 - (led_cur->scan == USB_LED_NUM_LOCK_SCANCODE && kbled & (1<scan == USB_LED_CAPS_LOCK_SCANCODE && kbled & (1<scan == USB_LED_SCROLL_LOCK_SCANCODE && kbled & (1<scan == USB_LED_COMPOSE_SCANCODE && kbled & (1<scan == USB_LED_KANA_SCANCODE && kbled & (1<rgb.r > 127) *led_cur->rgb.r = 0; - else *led_cur->rgb.r = 255; - if (*led_cur->rgb.g > 127) *led_cur->rgb.g = 0; - else *led_cur->rgb.g = 255; - if (*led_cur->rgb.b > 127) *led_cur->rgb.b = 0; - else *led_cur->rgb.b = 255; + led_buffer[i].r = 255 - led_buffer[i].r; + led_buffer[i].g = 255 - led_buffer[i].g; + led_buffer[i].b = 255 - led_buffer[i].b; } } -#endif //USB_LED_INDICATOR_ENABLE - - led_cur++; - led_this_run++; } -} -uint8_t led_matrix_init(void) -{ - DBGC(DC_LED_MATRIX_INIT_BEGIN); +} - issi3733_prepare_arrays(); +const rgb_matrix_driver_t rgb_matrix_driver = { + .init = init, + .flush = flush, + .set_color = led_set_one, + .set_color_all = led_set_all +}; + +/*============================================================================== += Legacy Lighting Support = +==============================================================================*/ + +#ifdef USE_MASSDROP_CONFIGURATOR +// Ported from Massdrop QMK Github Repo + +// TODO?: wire these up to keymap.c +uint8_t led_animation_orientation = 0; +uint8_t led_animation_direction = 0; +uint8_t led_animation_breathing = 0; +uint8_t led_animation_id = 0; +float led_animation_speed = 4.0f; +uint8_t led_lighting_mode = LED_MODE_NORMAL; +uint8_t led_enabled = 1; +uint8_t led_animation_breathe_cur = BREATHE_MIN_STEP; +uint8_t breathe_dir = 1; + +static void led_run_pattern(led_setup_t *f, float* ro, float* go, float* bo, float pos) { + float po; - led_matrix_prepare(); + while (f->end != 1) + { + po = pos; //Reset po for new frame - disp.frame = 0; - led_next_run = 0; - - led_enabled = 1; - led_animation_id = 0; - led_lighting_mode = LED_MODE_NORMAL; - led_animation_speed = 4.0f; - led_animation_direction = 0; - led_animation_orientation = 0; - led_animation_breathing = 0; - led_animation_breathe_cur = BREATHE_MIN_STEP; - breathe_step = 1; - breathe_dir = 1; - led_animation_circular = 0; + //Add in any moving effects + if ((!led_animation_direction && f->ef & EF_SCR_R) || (led_animation_direction && (f->ef & EF_SCR_L))) + { + po -= pomod; - gcr_min_counter = 0; - v_5v_cat_hit = 0; + if (po > 100) po -= 100; + else if (po < 0) po += 100; + } + else if ((!led_animation_direction && f->ef & EF_SCR_L) || (led_animation_direction && (f->ef & EF_SCR_R))) + { + po += pomod; - //Run led matrix code once for initial LED coloring - led_cur = 0; - rgb_matrix_init_user(); - led_matrix_run(); + if (po > 100) po -= 100; + else if (po < 0) po += 100; + } - DBGC(DC_LED_MATRIX_INIT_COMPLETE); + //Check if LED's po is in current frame + if (po < f->hs) { f++; continue; } + if (po > f->he) { f++; continue; } + //note: < 0 or > 100 continue - return 0; -} + //Calculate the po within the start-stop percentage for color blending + po = (po - f->hs) / (f->he - f->hs); -__attribute__ ((weak)) -void rgb_matrix_init_user(void) { + //Add in any color effects + if (f->ef & EF_OVER) + { + *ro = (po * (f->re - f->rs)) + f->rs;// + 0.5; + *go = (po * (f->ge - f->gs)) + f->gs;// + 0.5; + *bo = (po * (f->be - f->bs)) + f->bs;// + 0.5; + } + else if (f->ef & EF_SUBTRACT) + { + *ro -= (po * (f->re - f->rs)) + f->rs;// + 0.5; + *go -= (po * (f->ge - f->gs)) + f->gs;// + 0.5; + *bo -= (po * (f->be - f->bs)) + f->bs;// + 0.5; + } + else + { + *ro += (po * (f->re - f->rs)) + f->rs;// + 0.5; + *go += (po * (f->ge - f->gs)) + f->gs;// + 0.5; + *bo += (po * (f->be - f->bs)) + f->bs;// + 0.5; + } + f++; + } } -#define LED_UPDATE_RATE 10 //ms - -//led data processing can take time, so process data in chunks to free up the processor -//this is done through led_cur and lede -void led_matrix_task(void) +static void led_matrix_massdrop_config_override(int i) { - if (led_enabled) - { - //If an update may run and frame processing has completed - if (timer_read64() >= led_next_run && led_cur == lede) - { - uint8_t drvid; + float ro = 0; + float go = 0; + float bo = 0; + + float po = (led_animation_orientation) + ? (float)g_rgb_leds[i].point.y / 64.f * 100 + : (float)g_rgb_leds[i].point.x / 224.f * 100; + + uint8_t highest_active_layer = biton32(layer_state); + + if (led_lighting_mode == LED_MODE_KEYS_ONLY && g_rgb_leds[i].matrix_co.raw == 0xff) { + //Do not act on this LED + } else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && g_rgb_leds[i].matrix_co.raw != 0xff) { + //Do not act on this LED + } else if (led_lighting_mode == LED_MODE_INDICATORS_ONLY) { + //Do not act on this LED (Only show indicators) + } else { + led_instruction_t* led_cur_instruction = led_instructions; + while (!led_cur_instruction->end) { + // Check if this applies to current layer + if ((led_cur_instruction->flags & LED_FLAG_MATCH_LAYER) && + (led_cur_instruction->layer != highest_active_layer)) { + goto next_iter; + } - led_next_run = timer_read64() + LED_UPDATE_RATE; //Set next frame update time + // Check if this applies to current index + if (led_cur_instruction->flags & LED_FLAG_MATCH_ID) { + uint8_t modid = i / 32; //Calculate which id# contains the led bit + uint32_t modidbit = 1 << (i % 32); //Calculate the bit within the id# + uint32_t *bitfield = &led_cur_instruction->id0 + modid; //Add modid as offset to id0 address. *bitfield is now idX of the led id + if (~(*bitfield) & modidbit) { //Check if led bit is not set in idX + goto next_iter; + } + } - //NOTE: GCR does not need to be timed with LED processing, but there is really no harm - if (gcr_actual != gcr_actual_last) - { - for (drvid=0;drvidflags & LED_FLAG_USE_RGB) { + ro = led_cur_instruction->r; + go = led_cur_instruction->g; + bo = led_cur_instruction->b; + } else if (led_cur_instruction->flags & LED_FLAG_USE_PATTERN) { + led_run_pattern(led_setups[led_cur_instruction->pattern_id], &ro, &go, &bo, po); + } else if (led_cur_instruction->flags & LED_FLAG_USE_ROTATE_PATTERN) { + led_run_pattern(led_setups[led_animation_id], &ro, &go, &bo, po); } - for (drvid=0;drvid 255) ro = 255; else if (ro < 0) ro = 0; + if (go > 255) go = 255; else if (go < 0) go = 0; + if (bo > 255) bo = 255; else if (bo < 0) bo = 0; - led_cur = 0; //Signal next frame calculations may begin + if (led_animation_breathing) + { + ro *= breathe_mult; + go *= breathe_mult; + bo *= breathe_mult; } } - //Process more data if not finished - if (led_cur != lede) - { - //DBG_1_OFF; //debug profiling - led_matrix_run(); - //DBG_1_ON; //debug profiling - } + led_buffer[i].r = (uint8_t)ro; + led_buffer[i].g = (uint8_t)go; + led_buffer[i].b = (uint8_t)bo; } +#endif // USE_MASSDROP_CONFIGURATOR diff --git a/tmk_core/protocol/arm_atsam/led_matrix.h b/tmk_core/protocol/arm_atsam/led_matrix.h index 4513234e7f..1316efd9a4 100644 --- a/tmk_core/protocol/arm_atsam/led_matrix.h +++ b/tmk_core/protocol/arm_atsam/led_matrix.h @@ -18,6 +18,8 @@ along with this program. If not, see . #ifndef _LED_MATRIX_H_ #define _LED_MATRIX_H_ +#include "quantum.h" + //From keyboard #include "config_led.h" @@ -75,25 +77,20 @@ typedef struct issi3733_led_s { uint8_t scan; //Key scan code from wiring (set 0xFF if no key) } issi3733_led_t; -typedef struct led_disp_s { - uint64_t frame; - float left; - float right; - float top; - float bottom; - float width; - float height; - float max_distance; -} led_disp_t; +extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; -uint8_t led_matrix_init(void); -void rgb_matrix_init_user(void); +extern uint8_t gcr_desired; +extern uint8_t gcr_breathe; +extern uint8_t gcr_actual; +extern uint8_t gcr_actual_last; -#define LED_MODE_NORMAL 0 //Must be 0 -#define LED_MODE_KEYS_ONLY 1 -#define LED_MODE_NON_KEYS_ONLY 2 -#define LED_MODE_INDICATORS_ONLY 3 -#define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY //Must be highest value +void gcr_compute(void); + +void led_matrix_indicators(void); + +/*------------------------- Legacy Lighting Support ------------------------*/ + +#ifdef USE_MASSDROP_CONFIGURATOR #define EF_NONE 0x00000000 //No effect #define EF_OVER 0x00000001 //Overwrite any previous color information with new @@ -114,33 +111,48 @@ typedef struct led_setup_s { uint8_t end; //Set to signal end of the setup } led_setup_t; -extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; +extern const uint8_t led_setups_count; +extern void *led_setups[]; -extern uint8_t gcr_desired; -extern uint8_t gcr_breathe; -extern uint8_t gcr_actual; -extern uint8_t gcr_actual_last; +//LED Extra Instructions +#define LED_FLAG_NULL 0x00 //Matching and coloring not used (default) +#define LED_FLAG_MATCH_ID 0x01 //Match on the ID of the LED (set id#'s to desired bit pattern, first LED is id 1) +#define LED_FLAG_MATCH_LAYER 0x02 //Match on the current active layer (set layer to desired match layer) +#define LED_FLAG_USE_RGB 0x10 //Use a specific RGB value (set r, g, b to desired output color values) +#define LED_FLAG_USE_PATTERN 0x20 //Use a specific pattern ID (set pattern_id to desired output pattern) +#define LED_FLAG_USE_ROTATE_PATTERN 0x40 //Use pattern the user has cycled to manually + +typedef struct led_instruction_s { + uint16_t flags; // Bitfield for LED instructions + uint32_t id0; // Bitwise id, IDs 0-31 + uint32_t id1; // Bitwise id, IDs 32-63 + uint32_t id2; // Bitwise id, IDs 64-95 + uint32_t id3; // Bitwise id, IDs 96-127 + uint8_t layer; + uint8_t r; + uint8_t g; + uint8_t b; + uint8_t pattern_id; + uint8_t end; +} led_instruction_t; + +extern led_instruction_t led_instructions[]; +extern uint8_t led_animation_breathing; extern uint8_t led_animation_id; -extern uint8_t led_enabled; extern float led_animation_speed; extern uint8_t led_lighting_mode; -extern uint8_t led_animation_direction; -extern uint8_t led_animation_orientation; -extern uint8_t led_animation_breathing; +extern uint8_t led_enabled; extern uint8_t led_animation_breathe_cur; +extern uint8_t led_animation_direction; extern uint8_t breathe_dir; -extern uint8_t led_animation_circular; -extern const uint8_t led_setups_count; -extern void *led_setups[]; - -extern issi3733_led_t *led_cur; -extern issi3733_led_t *lede; - -void led_matrix_run(void); -void led_matrix_task(void); +#define LED_MODE_NORMAL 0 //Must be 0 +#define LED_MODE_KEYS_ONLY 1 +#define LED_MODE_NON_KEYS_ONLY 2 +#define LED_MODE_INDICATORS_ONLY 3 +#define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY //Must be highest value -void gcr_compute(void); +#endif // USE_MASSDROP_CONFIGURATOR #endif //_LED_MATRIX_H_ diff --git a/keyboards/massdrop/alt/led_programs.c b/tmk_core/protocol/arm_atsam/led_matrix_programs.c similarity index 99% rename from keyboards/massdrop/alt/led_programs.c rename to tmk_core/protocol/arm_atsam/led_matrix_programs.c index b3b7a7e90e..cf7478dc31 100644 --- a/keyboards/massdrop/alt/led_programs.c +++ b/tmk_core/protocol/arm_atsam/led_matrix_programs.c @@ -15,7 +15,8 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include "alt.h" +#ifdef USE_MASSDROP_CONFIGURATOR + #include "led_matrix.h" //Teal <-> Salmon @@ -118,3 +119,5 @@ void *led_setups[] = { }; const uint8_t led_setups_count = sizeof(led_setups) / sizeof(led_setups[0]); + +#endif diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c index eaad66e9fc..0974a230d4 100644 --- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c +++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c @@ -203,13 +203,6 @@ void main_subtask_usb_state(void) } } -void main_subtask_led(void) -{ - if (g_usb_state != USB_FSMSTATUS_FSMSTATE_ON_Val) return; //Only run LED tasks if USB is operating - - led_matrix_task(); -} - void main_subtask_power_check(void) { static uint64_t next_5v_checkup = 0; @@ -221,7 +214,9 @@ void main_subtask_power_check(void) v_5v = adc_get(ADC_5V); v_5v_avg = 0.9 * v_5v_avg + 0.1 * v_5v; +#ifdef RGB_MATRIX_ENABLE gcr_compute(); +#endif } } @@ -240,7 +235,6 @@ void main_subtask_usb_extra_device(void) void main_subtasks(void) { main_subtask_usb_state(); - main_subtask_led(); main_subtask_power_check(); main_subtask_usb_extra_device(); } @@ -263,7 +257,9 @@ int main(void) SR_EXP_Init(); +#ifdef RGB_MATRIX_ENABLE i2c1_init(); +#endif // RGB_MATRIX_ENABLE matrix_init(); @@ -281,8 +277,7 @@ int main(void) DBG_LED_OFF; - led_matrix_init(); - +#ifdef RGB_MATRIX_ENABLE while (I2C3733_Init_Control() != 1) {} while (I2C3733_Init_Drivers() != 1) {} @@ -292,6 +287,7 @@ int main(void) for (uint8_t drvid = 0; drvid < ISSI3733_DRIVER_COUNT; drvid++) I2C_LED_Q_ONOFF(drvid); //Queue data +#endif // RGB_MATRIX_ENABLE keyboard_setup(); diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.c b/tmk_core/protocol/arm_atsam/usb/usb2422.c index d6e1922429..76ec3aaaa7 100644 --- a/tmk_core/protocol/arm_atsam/usb/usb2422.c +++ b/tmk_core/protocol/arm_atsam/usb/usb2422.c @@ -365,8 +365,10 @@ void USB_ExtraSetState(uint8_t state) if (usb_extra_state == USB_EXTRA_STATE_ENABLED) CDC_print("USB: Extra enabled\r\n"); else if (usb_extra_state == USB_EXTRA_STATE_DISABLED) { - CDC_print("USB: Extra disabled\r\n"); - if (led_animation_breathing) gcr_breathe = gcr_desired; + CDC_print("USB: Extra disabled\r\n"); +#ifdef USE_MASSDROP_CONFIGURATOR + if (led_animation_breathing) gcr_breathe = gcr_desired; +#endif } else if (usb_extra_state == USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG) CDC_print("USB: Extra disabled until replug\r\n"); else CDC_print("USB: Extra state unknown\r\n"); diff --git a/users/stanrc85/config.h b/users/stanrc85/config.h index 14284435be..42306727ce 100644 --- a/users/stanrc85/config.h +++ b/users/stanrc85/config.h @@ -1,6 +1,6 @@ #pragma once -#define TAPPING_TERM 200 +#define TAPPING_TERM 250 #define RETRO_TAPPING #ifdef RGBLIGHT_ENABLE diff --git a/users/stanrc85/stanrc85.c b/users/stanrc85/stanrc85.c index 4a46d61daa..78b0c4a149 100644 --- a/users/stanrc85/stanrc85.c +++ b/users/stanrc85/stanrc85.c @@ -77,7 +77,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), 10); set_mods(mods); } - return false; break; case KC_RDP: //Opens Windows RDP if (!record->event.pressed) { @@ -88,7 +87,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { send_string_with_delay_P(PSTR("mstsc"), 10); send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), 10); } - return false; break; } return process_record_keymap(keycode, record); diff --git a/util/docker_build.sh b/util/docker_build.sh index e7aeac8f3e..35839ac41e 100755 --- a/util/docker_build.sh +++ b/util/docker_build.sh @@ -47,4 +47,4 @@ dir=$(pwd -W 2>/dev/null) || dir=$PWD # Use Windows path if on Windows # Run container and build firmware docker run --rm -it $usb_args -v "$dir":/qmk_firmware qmkfm/qmk_firmware \ - make "$keyboard${keymap:+:$keymap}${target:+:$target}" + /bin/bash -c "make git-submodule; make \"$keyboard${keymap:+:$keymap}${target:+:$target}\""